Data Sheet -- M5 Enclosure for Picture Perfect &

IFS Line / Network Transmission
NS2051-4P/1T
5-port PoE Unmanaged
Industrial Ethernet Switch
Overview
The IFS 5-port PoE Unmanaged Industrial Ethernet Switch provides
four 10/100Mbps Ethernet ports with IEEE802.3-af PoE and one
10/100Mbps non-PoE Ethernet port.
This unmanaged switch provides plug-and-play installation with no
programming required and is ideal for use in small IP systems. The
switch uses an IP-30 standard metal case and can also be used
in electrically harsh and climatically demanding environments. The
switch accommodates either DIN-rail or wall mounting for efficient
installation in multiple applications.
This switch is engineered with a high-performance switch architecture
capable of providing a non-blocking switch fabric and wire-speed
throughput of 1Gbps. With its 2K MAC address table, this switch
offers wire-speed packet transfer performance without the risk of
packet loss. The Flow Control function allows the switch to deliver
fast and reliable IP data transfer.
This switch is ideal for applications such as IP cameras, access
control, VoIP and wireless access points.
Standard Features
RJ-45 Ports
• 4-Port 10/100Base-TX (PoE)
• 1-Port 10/100Base-TX (non-PoE)
• Auto MDI/MDI-X
• Auto-negotiation
• Prevents packet loss with back pressure (half-duplex) and
IEEE 802.3x PAUSE frame-flow control (full-duplex)
• Integrated address-lookup engine supports 2K absolute
MAC addresses
• CSMA/CD Protocol
• Automatic source-address learning and aging
• Support to handle up to 1522 bytes packet size
Power over Ethernet (PoE)
• Up to 4 IEEE 802.3af devices powered
• Complies with IEEE 802.3af Power over Ethernet End-Span PSE
• Supports up to 15.4 watts for each PoE port
• Auto detect powered device (PD)
• Circuit protection prevents power interference between ports
• Remote power feeding up to 328 ft. (100m)
Robust Hardened Design
• Slim IP-30 metal enclosure for protection
• Provides either DIN-rail or wall-mounting
• 24~48VDC or 24VAC Operation
• Redundant power with reverse-polarity protection
• Removable terminal block for master and slave power
• Alarm relay output for power-failure alert
• Voltage/surge-suppression
- EFT 6000VDC protection for power lines
- ESD 6000VDC protection for Ethernet
• Complies with IEC60068-2-xx standards for free-fall,
shock and vibration
• Wide operating temperature range of -40ºC ~ +75ºC
Warranty
• 3-year limited warranty
High Performance Architecture
• Unmanaged plug and play installation requiring no programming
• Store-and-Forward switching architecture with wire-speed
filtering and forwarding rates
interlogix.com
NS2051-4P/1T
5-port PoE Unmanaged
North America
T 855-286-8889
Asia
T 852-2907-8108
Australia
Europe
T 61-3-9239-1200 T 32-2-725-11-20
Latin America
T 561-998-6114
Industrial Ethernet Switch
Specifications
Ordering Information
NS2051-4P/1T
Port Configuration
Auto MDI/MDI-X
Port Speed
Auto-negotiate
Electro Static Discharge
(ESD) Protection
6KVDC
PoE
PoE Standard
IEEE 802.3af Power over Ethernet / PSE
PoE Power Supply Type
End-Span
PoE Power Output
Per Port 48V DC, 350mA . Max. 15.4 Watts
Power Pin Assignment
1/2(+), 3/6(-)
Switch Performance
Switch Architecture
Store-and-Forward
Switch Fabric
1Gbps / non-blocking
Throughput (Packet per second)
0.744Mpps@64bytes
Address Table
2K entries
Shared Data Buffer
1Mbit on-chip frame buffer
Maximum Frame Size
1522 Bytes packet
Flow Control
Back pressure for Half-Duplex,
IEEE 802.3x PAUSE Frame for Full-Duplex
LED Indicators
PoE
PoE in use – Amber
LNK/ACT
PoE In-Use
5
LNK/
ACT
24~48VDC or 24VAC, Redundant power with
polarity-reverse protection function
Power Consumption
76.3Watts Max.
Electrical Fast Transient
(EFT) Protection
6KVDC
Power and Alarm Fault
Connector
6-pin removable screw terminal
Alarm Fault Relay
Provides one relay output for power failure
notification; 24VDC – 1A max.
Enclosure
IP-30 slim-type metal enclosure
Mounting
DIN-rail kit and wall-mount ears
Dimensions (in/mm) (W x D x H)
2.20 x 3.46 x 5.31 in. (56 x 87.8 x 135mm)
Weight (lbs./kg)
1.86 lbs./0.842kg
1.86 in.
(47.30mm)
1.92 in.
(48.80mm)
4
3
1.53 in.
(38.83mm)
2
LNK/
ACT
1
PoE
In-Use
(3mm)
NS2051-4P/1T
3.46 in.
(87.80mm)
3.81 in.
(96.87mm)
Electrical & Mechanical
Supply Voltage
Top
Input
DC24V/48V
Optical Link
Link established – Steady Green; TX/RX Activity –
blinking green
P2 FAULT
V2+
Connected to network – Green
P1
5-Port Fast Ethernet
Industrial PoE Switch
Side
PWR2
Fiber (100Base-FX)
Front
.60 in. (15.27mm)
V2-
100Mbps Activity – Green; 10Mbps Activity – Off
Dimensional Diagram
Fault
Proper Operation – Off; Fault –Green
RJ-45 (10/100Mbps)
48VDC@2A (100W) DIN-Rail Mount Hardened Power
Supply (100~240VAC)
PS48VDC100W-DIN
V1+
Power Fault
Accessories
PWR1
Power input 1 – Green; Power input 2 – Green
User’s Manual, DIN-Rail Kit, Wall Mount Kit
Note: External power supply must be ordered separately.
V1-
Power
5-port PoE Unmanaged Industrial Ethernet Switch
Included Accessories
1.18 in. (30mm)
RJ-45 (4) PoE and (1) non-PoE (5 total)
.36 in. (9.20mm)
10/100Base-TX Connectors
5.31 in. (135mm)
RJ45 Ports
2.20 in.
(56mm)
Typical Application
Cat 5e Cable
100m (328 ft.) Max.
Redundant Power
and
Alarm Fault Relay
NS2051-4P/1T
IP PoE Camera
NVR
IP PoE Camera
Environmental
MTBF
> 100,000 Hrs @ 25°C
Operating Temperature
-40°C~75°C
Storage Temperature
-40°C~85°C
Relative Humidity
0%~95% (non-condensing)
IP PoE Camera
IP PoE Camera
Standards Compliance
IEEE Standards
IEEE 802.3 10Base-T
IEEE 802.3u 100Base-TX /100Base-FX
IEEE 802.3x Flow Control and Back pressure
IEEE 802.3-af PoE (15.4w)
IEC Standards
IEC60068-2-32(Free fall)
IEC60068-2-27(Shock)
IEC60068-2-6(Vibration)
EIA/TIA-568 Standards
2-Pair UTP Cat. 3, 4, 5 (100meters, max.)
EIA/TIA-568 100-ohm STP (100meters, max.)
Regulation
FCC Part 15 Class A, CE
Cat 5e Cable
100m (328 ft.) Max.
interlogix.com
Specifications subject to change without notice.
210-3569
© 2012 Interlogix
All rights reserved.
2012/10 (71654F)
Download PDF
Similar pages