Wireless N In-Wall Access Point - D-Link

Product Highlights
Flush Mounted Design
Descreetly installs inside the wall, keeping your
interior design intact by seemlessly blending in with
the decor
High Performance Connectivity
Enhanced Wi-Fi cuts through walls and obstacles,
providing 150 Mbps of wireless speed for seemless
video streaming, and fast downloads
Full Featured Security
Easy setup for a WPA encryption secure conection,
supporting multiple SSIDs and VLANs, while
allowing complete control over network access
Wireless N In-Wall Access Point
The DAP-2210 Wireless N In-Wall Access Point is an 802.11n high power PoE 1x1 business AP
For Business-Class Environment1
the decor. For use in business settings such as hotels, hospitals, campuses or dormatories,
• 2.4 GHz 802.11n Connectivity
• High Power Design2
• Built-in 4.5 dbi PIFA Antenna
High Performance Connectivity
that uses an flush mounted design for adding a fast wireless interface that won’t clash with
the flush mounted design allows for the DAP-2210 to be installed directly in the wall,
concealing your wireless network. With transfer rates of up to 11 Mbps and 150 Mbps in the
2.4 GHz frequency range, users connected to the DAP-2210 will enjoy faster downloads and
truly instant SMS communication without adding any bulky hardware.
• Wireless 802.11n/g/b, compatible with 802.11b
and 802.11g devices
Fast Connectivity Without the Bulky Hardware
• Up to 150 Mbps
The DAP-2210 is designed to allow you to add fast wired/wireless connectivity via flush mounted
• Back Panel: One 10/100 PoE Ethernet Port and
RJ11 for Phone Line In
installation– maintaining interior design considerations in your home or business. While some
• Front Panel: 10/100 Ethernet Port and RJ11 for
Phone Line Out
into a wall socket housing, making it the choice for users who need fast connectivity without
Trusted Security Features
AP’s are wall or ceiling-mountable, the DAP-2210 disappears from view once embedded
adding bulky hardware.
• WPA/WPA2-Personal/Enterprise
Easy Expansion and Increased Range
• 64/128 bit WEP Encryption
The DAP-2210 can be used to set up a wireless network or expand your current wireless
• 802.1x
capacity with 2.4 GHz 802.11n wireless connectivity. In addition, the PoE supported 10/100
• MAC Address Filter
Ethernet port allows for further physical wired expansion. The built-in 4.5 dbi PIFA antenna has
• Client Isolation
a high power output3, ensuring that wireless coverage will cover even the most hard to reach
• User Limit
locations. Whether you want to connect additional wireless devices such as smartphones or
Convenient Installation
• Standard PoE Design
• Telephone Line Pass through
laptops, or bring connectivity to networks separated by short distances, the DAP-2210 has it
Robust Security
And Management
N In-WallTools
Access Point
Fine-Tuned Control Over Network Resources
The DAP-2210 supports up to 8 SSIDs, allowing the administrators to logically
The DAP-2210’s security and management features include support for
divide the access point into several virtual access points all within a single
64/128-bit WEP data encryption and WPA/WPA2 security functions. In
hardware platform. Rather than having separate networks with several access
addition, it provides MAC address filtering to control user access, and the
points, administrators can deploy one single AP to support more than one
disable SSID broadcast function to limit outsiders’ access to the internal
application, such as public Internet access and internal network control to
network. Network administrators have multiple options for managing the
increase flexibility and keep costs down. The DAP-2210 supports 802.1Q
DAP-2210, including HTTP and HTTPS, as well as the power saving Wi-fi
VLAN tagging, operating with multiple SSIDs to segment traffic, enhancing
scheduling feature. Administrators can use SNMPv1, v2c, v3 to configure and
performance and security. The DAP-2210 also provides WLAN partitioning, a
manage access points, adding increased flexibility to your wired or wireless
useful function for deployments such as wireless hot spots. With station-to-
station partitioning enabled, security is enhanced, preventing wireless users
from accessing each other, and reducing the possibility of data theft.
Reset Button
Power/Status LED
RJ11 Port for Telephone Line
RJ45 10/100 Ethernet Port
RJ45 10/100 LAN (PoE) Port
RJ11 Port for Telephone Line
Technical Specifications
• Front Panel:
• One 10/100 Ethernet Port
• RJ11 for Phone Line Out
Device Interfaces
• Back Panel:
• One 10/100 PoE Ethernet Port
• RJ11 for Phone Line In
• Power/Status
• 4.5 dbi PIFA Antenna
Wireless Frequency
• 2.4 GHz
• IEEE 802.11b
• IEEE 802.11g
• IEEE 802.11n
Operation Mode
• AP
• AP Router
Network Management
• Web Browser Interface
• HTTP – Secure HTTP (HTTPS)
• SNMP v1, v2c and v3
• WPA2-Personal/Enterprise
• WPA-Personal/Enterprise
• WEP 64/128 bit Encryption
• 802.1X
• Support for up to 8 SSIDs/VLANs
DAP-2210 Wireless N In-Wall Access Point
• 7.826 x 5.177 x 4.106 cm (3.08 x 2.04 x 1.62 inches)
• 30 grams (0.07 lbs)
• Standard 802.3af PoE
Maximum Transmit Output Power
• 27dbm
• Operating: 0 to 40 °C (32 to 104 °F) •
• Storage: -20 to 65 °C (-4 to 149 °F)
• Operating: 10% to 90% non-condensing •
• Storage: 5% to 95% non-condensing
• CE
Order Information
Part Number
Wireless N In-Wall Access Point
Limited warranty (12 months)
Maximum power setting will vary according to individual country regulations.
Maximum wireless signal rate derived from IEEE Standard 802.11g, and 802.11n specifications. Actual data throughput will vary. Network conditions and environmental factors, including volume of network traffic, building
materials and construction, and network overhead, lower actual data throughput rate. Environmental factors will adversely affect wireless signal range.
Updated 2014/01/08
Specifications are subject to change without notice. D-Link is a registered trademark of D-Link
Corporation and its overseas subsidiaries. All other trademarks belong to their respective owners.
©2014 D-Link Corporation. All rights reserved. E&OE.
Download PDF
Similar pages