QuickSpecs
HP 1410 Switch Series
Overview
Models
HP 1410-8G Switch
HP 1410-16G Switch
HP 1410-24G Switch
HP 1410-8 Switch
HP 1410-16 Switch
HP 1410-24 Switch
HP 1410-24-2G Switch
J9559A
J9560A
J9561A
J9661A
J9662A
J9663A
J9664A
Key features
Unmanaged Gigabit and Fast Ethernet switches
Green features for low power consumption
Fanless for silent operation
Quality-of-Service (QoS) support
Lifetime warranty*
Product overview
HP 1410 series switches are unmanaged Gigabit Ethernet and Fast Ethernet switches designed for small businesses looking
for entry-level, low-cost networking solutions with a lifetime warranty. The HP 1410 switch series consists of seven models
with flexible mounting options that allow customers to choose the best switch to meet their network switching needs. All
models have QoS support and IEEE 802.3x flow control features to provide outstanding data efficiency. Simplified plug-andplay operation is enabled by features like Auto-MDIX and auto-speed negotiation. HP has innovated and combined the latest
advances in silicon technology to provide some of the most power-efficient switches: 16- and 24-port Fast Ethernet models
are the industry's first IEEE 802.3az compliant unmanaged Fast Ethernet switches. The available green features, along with
the lifetime warranty, make the HP 1410 switch series ideal for customers seeking low-cost and reliable networking
solutions.
Features and benefits
Quality of Service (QoS)
IEEE 802.1p prioritization: delivers data to devices based on the priority and type of traffic
DiffServ Code Point (DSCP) support: allows real-time traffic prioritization based on Layer 3 TOS/DSCP parameters
Connectivity
Auto-MDIX: automatically adjusts for straight-through or crossover cables on all 10/100 and 10/100/1000 ports
Performance
NEW Energy-efficient Ethernet support (J9662A and J9663A only): supports new IEEE 802.3az standard; allows
lower power consumption when operated with IEEE-compliant client devices in 100 Mb/s mode only
Half-/Full-duplex auto-negotiating capability on every port: doubles the throughput of every port
Jumbo frame support (Gigabit Ethernet models only): allows frames up to 9216 bytes to be switched through the
network
Mini jumbo frame support (J9662A and J9663A only): allows frames up to 2048 bytes to be switched through the
network, which supports large data transfers
DA - 13674 U.S. QuickSpecs — Version 7 — 10-28-2011
Page 1
QuickSpecs
HP 1410 Switch Series
Overview
Ease of use
Unmanaged: provides plug-and-play simplicity
Comprehensive LED display with per-port indicators: provides an at-a-glance view of status, activity, speed, and
full-duplex operation
Flow control: helps ensure reliable communications during full-duplex operation
Auto-speed negotiation: automatically selects individual port speed depending on client capabilities without the need
for manual intervention, allowing for simple plug-and-play operation
Flexibility
Fanless design: enables quiet operation for deployment in open spaces
Warranty and support
Lifetime warranty: for as long as you own the product with advance replacement and next-business-day delivery
(available in most countries)*
Electronic and telephone support: limited electronic and telephone support is available from HP; refer to:
www.hp.com/networking/warranty for details on the support provided and the period during which support is available
* Hardware warranties replacement for as long as you own the product, with next business day advance replacement
(available in most countries). The disk drive included with HP Alliance One Advanced Services and Services zl Modules, HP
Threat Management Services zl Module, HP AllianceOne Ext zl Mod w/Rvrbd Stlhd, HP E-MSM765zl Mobility Controller and
HP Surv Brch Com zl Mod pwrby Msft Lync has a five-year hardware warranty. For details, refer to the Software license and
hardware warranty statements at: www.hp.com/networking/warranty.
DA - 13674 U.S. QuickSpecs — Version 7 — 10-28-2011
Page 2
QuickSpecs
HP 1410 Switch Series
Technical Specifications
HP 1410-8G Switch (J9559A)
Ports
8 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX,
IEEE 802.3ab Type 1000BASE-T); Media Type: Auto-MDIX; Duplex: 10BASE-T/100BASE-TX:
half or full; 1000BASE-T: full only
Physical
Dimensions
3.8(d) x 6.14(w) x 0.96(h) in. (9.65 x 15.6 x 2.45 cm) (.5U height)
characteristics
Weight
.74 lb. (0.34 kg)
Memory and processor 4 Kb EEPROM capacity; packet buffer size: 192 KB
Mounting
Wall, desktop, and under-table mounting
Performance
100 Mb Latency
< 3.6 µs (LIFO 64-byte packets)
1000 Mb Latency
< 1.2 µs (LIFO 64-byte packets)
Throughput
up to 11.9 million pps (64-byte packets)
Switching capacity
16 Gbps
MAC address table size 4096 entries
Environment
Electrical
characteristics
Safety
Emissions
Immunity
Operating temperature 32°F to 104°F (0°C to 40°C)
Operating relative
15% to 95% @ 104°F (40°C), noncondensing
humidity
Nonoperating/Storage -40°F to 158°F (-40°C to 70°C)
temperature
Nonoperating/Storage 15% to 90% @ 149°F (65°C), noncondensing
relative humidity
Altitude
up to 10,000 ft. (3 km)
Acoustic
Power: 0 dB No fan
Maximum heat
41 BTU/hr (43.26 kJ/hr)
dissipation
Voltage
100-240 VAC
Current
1.0 A
Maximum power rating12 W
Frequency
50/60 Hz
Notes
Maximum power rating and maximum heat dissipation are the worstcase theoretical maximum numbers provided for planning the
infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports
plugged in, and all modules populated.
The exact input voltage and frequency rating are determined by the
specific power adapter part number ordered. Please select the correct
power adapter country option.
CSA 22.2 No. 60950; EN 60950/IEC 60950; UL 60950-1
FCC Rules Part 15, Subpart B Class A
Generic
EN 55022 CISPR 22
EN
EN 55024, CISPR 24
ESD
IEC 61000-4-2
Radiated
IEC 61000-4-3
EFT/Burst
IEC 61000-4-4
Surge
IEC 61000-4-5
Conducted
IEC 61000-4-6
DA - 13674 U.S. QuickSpecs — Version 7 — 10-28-2011
Page 3
QuickSpecs
HP 1410 Switch Series
Technical Specifications
Services
Power frequency
IEC 61000-4-8
magnetic field
Voltage dips and
IEC 61000-4-11
interruptions
Harmonics
IEC 61000-3-2
Flicker
IEC 61000-3-3
3-year, 4-hour onsite, 13x5 coverage for hardware (UF795E)
3-year, 4-hour onsite, 24x7 coverage for hardware (UF796E)
1-year, post-warranty, 4-hour onsite, 13x5 coverage for hardware (HR843E)
1-year, post-warranty, 4-hour onsite, 24x7 coverage for hardware (HR844E)
Installation with minimum configuration, system-based pricing (U4826E)
Installation with HP-provided configuration, system-based pricing (U4830E)
4-year, 4-hour onsite, 13x5 coverage for hardware (UR816E)
4-year, 4-hour onsite, 24x7 coverage for hardware (UR817E)
5-year, 4-hour onsite, 13x5 coverage for hardware (UR818E)
5-year, 4-hour onsite, 24x7 coverage for hardware (UR819E)
3 Yr 6 hr Call-to-Repair Onsite (UW386E)
4 Yr 6 hr Call-to-Repair Onsite (UW387E)
5 Yr 6 hr Call-to-Repair Onsite (UW388E)
1-year, 6 hour Call-To-Repair Onsite for hardware (HR845E)
Refer to the HP website at: www.hp.com/networking/services for details on the service-level
descriptions and product numbers. For details about services and response times in your area,
please contact your local HP sales office.
HP 1410-16G Switch (J9560A)
Ports
16 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type
100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Media Type: Auto-MDIX; Duplex: 10BASET/100BASE-TX: half or full; 1000BASE-T: full only
Physical
Dimensions
4.41(d) x 8.21(w) x 1.73(h) in. (11.2 x 20.85 x 4.4 cm) (1U height)
characteristics
Weight
1.43 lb. (0.65 kg)
Memory and processor 512 KB flash; packet buffer size: 512 KB
Mounting
Mounts in an EIA-standard 19 in. telco rack (hardware included); wall, desktop, and under-table
mounting
Performance
100 Mb Latency
< 8.0 µs (LIFO 64-byte packets)
1000 Mb Latency
< 3.6 µs (LIFO 64-byte packets)
Throughput
up to 23.8 million pps (64-byte packets)
Switching capacity
32 Gbps
MAC address table size 8000 entries
Environment
Operating temperature 32°F to 104°F (0°C to 40°C)
Operating relative
15% to 95% @ 104°F (40°C), noncondensing
humidity
Nonoperating/Storage -40°F to 158°F (-40°C to 70°C)
temperature
Nonoperating/Storage 15% to 90% @ 149°F (65°C), noncondensing
relative humidity
Altitude
up to 10,000 ft. (3 km)
Acoustic
Power: 0 dB No fan
DA - 13674 U.S. QuickSpecs — Version 7 — 10-28-2011
Page 4
QuickSpecs
HP 1410 Switch Series
Technical Specifications
Electrical
characteristics
Safety
Emissions
Immunity
Services
Maximum heat
44 BTU/hr (46.42 kJ/hr)
dissipation
Voltage
100-240 VAC
Current
1.1 A
Maximum power rating13 W
Frequency
50/60 Hz
Notes
Maximum power rating and maximum heat dissipation are the worstcase theoretical maximum numbers provided for planning the
infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports
plugged in, and all modules populated.
The exact input voltage and frequency rating are determined by the
specific power adapter part number ordered. Please select the correct
power adapter country option.
CSA 22.2 No. 60950; UL 60950-1; IEC 60950-1; EN 60950-1
FCC Rules Part 15, Subpart B Class A
Generic
EN 55022 CISPR 22
EN
EN 55024, CISPR 24
ESD
IEC 61000-4-2
Radiated
IEC 61000-4-3
EFT/Burst
IEC 61000-4-4
Surge
IEC 61000-4-5
Conducted
IEC 61000-4-6
Power frequency
IEC 61000-4-8
magnetic field
Voltage dips and
IEC 61000-4-11
interruptions
Harmonics
IEC 61000-3-2
Flicker
IEC 61000-3-3
3-year, 4-hour onsite, 13x5 coverage for hardware (UF797E)
3-year, 4-hour onsite, 24x7 coverage for hardware (UF798E)
1-year, post-warranty, 4-hour onsite, 13x5 coverage for hardware (HR846E)
1-year, post-warranty, 4-hour onsite, 24x7 coverage for hardware (HR847E)
Installation with minimum configuration, system-based pricing (U4826E)
Installation with HP-provided configuration, system-based pricing (U4830E)
4-year, 4-hour onsite, 13x5 coverage for hardware (UR820E)
4-year, 4-hour onsite, 24x7 coverage for hardware (UR821E)
5-year, 4-hour onsite, 13x5 coverage for hardware (UR822E)
5-year, 4-hour onsite, 24x7 coverage for hardware (UR823E)
3 Yr 6 hr Call-to-Repair Onsite (UW389E)
4 Yr 6 hr Call-to-Repair Onsite (UW390E)
5 Yr 6 hr Call-to-Repair Onsite (UW391E)
1-year, 6 hour Call-To-Repair Onsite for hardware (HR848E)
Refer to the HP website at: www.hp.com/networking/services for details on the service-level
descriptions and product numbers. For details about services and response times in your area,
please contact your local HP sales office.
HP 1410-24G Switch (J9561A)
DA - 13674 U.S. QuickSpecs — Version 7 — 10-28-2011
Page 5
QuickSpecs
HP 1410 Switch Series
Technical Specifications
Ports
22 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX,
IEEE 802.3ab Type 1000BASE-T); Media Type: Auto-MDIX; Duplex: 10BASE-T/100BASE-TX:
half or full; 1000BASE-T: full only
2 dual-personality ports; each port can be used as either an RJ-45 10/100/1000 port (IEEE 802.3
Type 10Base-T; IEEE 802.3u Type 100Base-TX; IEEE 802.3ab 1000Base-T Gigabit Ethernet) or
an open mini-GBIC slot (for use with mini-GBIC transceivers)
Physical
Dimensions
6.65(d) x 13.23(w) x 1.73(h) in. (16.9 x 33.6 x 4.4 cm) (1U height)
characteristics
Weight
2.98 lb. (1.35 kg)
Memory and processor 512 KB flash; packet buffer size: 512 KB
Mounting
Mounts in an EIA-standard 19 in. telco rack (hardware included); wall, desktop, and under-table
mounting
Performance
100 Mb Latency
< 8.0 µs (LIFO 64-byte packets)
1000 Mb Latency
< 3.6 µs (LIFO 64-byte packets)
Throughput
up to 35.7 million pps (64-byte packets)
Environment
Electrical
characteristics
Safety
Emissions
Immunity
Switching capacity
48 Gbps
MAC address table size 8000 entries
Operating temperature 32°F to 104°F (0°C to 40°C)
Operating relative
15% to 95% @ 104°F (40°C), noncondensing
humidity
Nonoperating/Storage -40°F to 158°F (-40°C to 70°C)
temperature
Nonoperating/Storage 15% to 90% @ 149°F (65°C), noncondensing
relative humidity
Altitude
up to 10,000 ft. (3 km)
Acoustic
Power: 0 dB No fan
Maximum heat
75 BTU/hr (79.13 kJ/hr)
dissipation
Voltage
100-127/200-240 VAC
Current
0.3/0.2 A
Maximum power rating22 W
Frequency
50/60 Hz
Notes
Maximum power rating and maximum heat dissipation are the worstcase theoretical maximum numbers provided for planning the
infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports
plugged in, and all modules populated.
CSA 22.2 No. 60950; UL 60950-1; IEC 60950-1; EN 60950-1
FCC Rules Part 15, Subpart B Class A
Generic
EN 55022 CISPR 22
EN
EN 55024, CISPR 24
ESD
IEC 61000-4-2
Radiated
IEC 61000-4-3
EFT/Burst
IEC 61000-4-4
Surge
IEC 61000-4-5
Conducted
IEC 61000-4-6
Power frequency
IEC 61000-4-8
magnetic field
DA - 13674 U.S. QuickSpecs — Version 7 — 10-28-2011
Page 6
QuickSpecs
HP 1410 Switch Series
Technical Specifications
Notes
Services
Voltage dips and
IEC 61000-4-11
interruptions
Harmonics
IEC 61000-3-2
Flicker
IEC 61000-3-3
Use only supported genuine HP mini-GBICs with your switch.
3-year, 4-hour onsite, 13x5 coverage for hardware (UF797E)
3-year, 4-hour onsite, 24x7 coverage for hardware (UF798E)
1-year, post-warranty, 4-hour onsite, 13x5 coverage for hardware (HR846E)
1-year, post-warranty, 4-hour onsite, 24x7 coverage for hardware (HR847E)
Installation with minimum configuration, system-based pricing (U4826E)
Installation with HP-provided configuration, system-based pricing (U4830E)
4-year, 4-hour onsite, 13x5 coverage for hardware (UR820E)
4-year, 4-hour onsite, 24x7 coverage for hardware (UR821E)
5-year, 4-hour onsite, 13x5 coverage for hardware (UR822E)
5-year, 4-hour onsite, 24x7 coverage for hardware (UR823E)
3 Yr 6 hr Call-to-Repair Onsite (UW389E)
4 Yr 6 hr Call-to-Repair Onsite (UW390E)
5 Yr 6 hr Call-to-Repair Onsite (UW391E)
1-year, 6 hour Call-To-Repair Onsite for hardware (HR848E)
Refer to the HP website at: www.hp.com/networking/services for details on the service-level
descriptions and product numbers. For details about services and response times in your area,
please contact your local HP sales office.
HP 1410-8 Switch (J9661A)
Ports
Supports a maximum of 8 autosensing 10/100 ports
Physical
Dimensions
3.74(d) x 6.14(w) x 0.97(h) in. (9.5 x 15.6 x 2.46 cm)
characteristics
Weight
0.74 lb. (0.34 kg)
Memory and processor 96 KB
Mounting
Wall, desktop, and under-table mounting
Performance
100 Mb Latency
< 3.7µs (LIFO 64-byte packets)
Throughput
up to 1.1 million pps (64-byte packets)
Switching capacity
1.6 Gbps
MAC address table size 1040 entries
Environment
Operating temperature 32°F to 104°F (0°C to 40°C)
Operating relative
15% to 95% @ 104°F (40°C), noncondensing
humidity
Nonoperating/Storage -40°F to 158°F (-40°C to 70°C)
temperature
Nonoperating/Storage 15% to 90% @ 149°F (65°C), noncondensing
relative humidity
Altitude
up to 10,000 ft. (3 km)
Acoustic
Power: 0 dB
Electrical
Maximum heat
13 BTU/hr (13.72 kJ/hr)
characteristics
dissipation
Voltage
100-240 VAC
DC voltage
12 V
DA - 13674 U.S. QuickSpecs — Version 7 — 10-28-2011
Page 7
QuickSpecs
HP 1410 Switch Series
Technical Specifications
Safety
Emissions
Immunity
Services
Current
0.3 A
Maximum power rating3.6 W
Frequency
50/60 Hz
Notes
Maximum power rating and maximum heat dissipation are the worstcase theoretical maximum numbers provided for planning the
infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports
plugged in, and all modules populated.
The exact input voltage and frequency rating are determined by the
specific power adapter part number ordered. Please select the correct
power adapter country option.
UL 60950-1; CSA 22.2 60950-1; IEC 60950-1:2005; EN 60950-1:2006 + A11:2009
FCC Rules Part 15, Subpart B Class A
Generic
EN 55022 CISPR 22
EN
EN 55024, CISPR 24
ESD
IEC 61000-4-2
Radiated
IEC 61000-4-3
EFT/Burst
IEC 61000-4-4
Surge
IEC 61000-4-5
Conducted
IEC 61000-4-6
Power frequency
IEC 61000-4-8
magnetic field
Voltage dips and
IEC 61000-4-11
interruptions
Harmonics
IEC 61000-3-2
Flicker
IEC 61000-3-3
3-year, 4-hour onsite, 13x5 coverage for hardware (UF795E)
3-year, 4-hour onsite, 24x7 coverage for hardware (UF796E)
1-year, post-warranty, 4-hour onsite, 13x5 coverage for hardware (HR843E)
1-year, post-warranty, 4-hour onsite, 24x7 coverage for hardware (HR844E)
4-year, 4-hour onsite, 24x7 coverage for hardware (UR817E)
3 Yr 6 hr Call-to-Repair Onsite (UW386E)
1-year, 6 hour Call-To-Repair Onsite for hardware (HR845E)
Refer to the HP website at: www.hp.com/networking/services for details on the service-level
descriptions and product numbers. For details about services and response times in your area,
please contact your local HP sales office.
HP 1410-16 Switch (J9662A)
Ports
Supports a maximum of 16 autosensing 10/100 ports
Physical
Dimensions
4.21(d) x 8.21(w) x 1.73(h) in. (10.7 x 20.85 x 4.4 cm)
characteristics
Weight
1.43 lb. (0.65 kg)
Memory and processor 16 Kb EEPROM; packet buffer size: 2 Mb
Mounting
Mounts in an EIA-standard 19 in. telco rack (hardware included); wall, desktop, and under-table
mounting
DA - 13674 U.S. QuickSpecs — Version 7 — 10-28-2011
Page 8
QuickSpecs
HP 1410 Switch Series
Technical Specifications
Performance
Environment
Electrical
characteristics
Safety
Emissions
Immunity
Notes
Services
100 Mb Latency
< 10.6 µs (LIFO 64-byte packets)
Throughput
up to 2.3 million pps (64-byte packets)
Switching capacity
3.2 Gbps
MAC address table size 8192 entries
Operating temperature 32°F to 104°F (0°C to 40°C)
Operating relative
15% to 95% @ 104°F (40°C), noncondensing
humidity
Nonoperating/Storage -40°F to 158°F (-40°C to 70°C)
temperature
Nonoperating/Storage 15% to 90% @ 149°F (65°C), noncondensing
relative humidity
Altitude
up to 10,000 ft. (3 km)
Acoustic
Power: 0 dB
Maximum heat
13 BTU/hr (13.72 kJ/hr)
dissipation
Voltage
100-240 VAC
DC voltage
12 V
Current
0.3 A
Maximum power rating3.6 W
Frequency
50/60 Hz
Notes
Maximum power rating and maximum heat dissipation are the worstcase theoretical maximum numbers provided for planning the
infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports
plugged in, and all modules populated.
The exact input voltage and frequency rating are determined by the
specific power adapter part number ordered. Please select the correct
power adapter country option.
UL 60950-1; CSA C22.2 60950-1; IEC 60950-1:2005; EN 60950-1:2006 + A11:2009
FCC Rules Part 15, Subpart B Class A
Generic
EN 55022 CISPR 22
EN
EN 55024, CISPR 24
ESD
IEC 61000-4-2
Radiated
IEC 61000-4-3
EFT/Burst
IEC 61000-4-4
Surge
IEC 61000-4-5
Conducted
IEC 61000-4-6
Power frequency
IEC 61000-4-8
magnetic field
Voltage dips and
IEC 61000-4-11
interruptions
Harmonics
IEC 61000-3-2
Flicker
IEC 61000-3-3
IEEE 802.3az Energy Efficient Ethernet protocol is supported by the HP 1410-16 (J9662A) and
HP 1410-24 (J9663A) Switches only
3-year, 4-hour onsite, 13x5 coverage for hardware (UF797E)
3-year, 4-hour onsite, 24x7 coverage for hardware (UF798E)
DA - 13674 U.S. QuickSpecs — Version 7 — 10-28-2011
Page 9
QuickSpecs
HP 1410 Switch Series
Technical Specifications
1-year, post-warranty, 4-hour onsite, 13x5 coverage for hardware (HR846E)
1-year, post-warranty, 4-hour onsite, 24x7 coverage for hardware (HR847E)
4-year, 4-hour onsite, 13x5 coverage for hardware (UR820E)
4-year, 4-hour onsite, 24x7 coverage for hardware (UR821E)
5-year, 4-hour onsite, 13x5 coverage for hardware (UR822E)
5-year, 4-hour onsite, 24x7 coverage for hardware (UR823E)
3 Yr 6 hr Call-to-Repair Onsite (UW389E)
4 Yr 6 hr Call-to-Repair Onsite (UW390E)
5 Yr 6 hr Call-to-Repair Onsite (UW391E)
Refer to the HP website at: www.hp.com/networking/services for details on the service-level
descriptions and product numbers. For details about services and response times in your area,
please contact your local HP sales office.
HP 1410-24 Switch (J9663A)
Ports
Physical
characteristics
Supports a maximum of 24 autosensing 10/100 ports
Dimensions
6.65(d) x 13.23(w) x 1.73(h) in. (16.9 x 33.6 x 4.4 cm)
Weight
2.98 lb. (1.35 kg)
Memory and processor 16 Kb EEPROM; packet buffer size: 2 Mb
Mounting
Mounts in an EIA-standard 19 in. telco rack (hardware included); wall, desktop, and under-table
mounting
Performance
100 Mb Latency
< 11 µs (LIFO 64-byte packets)
Throughput
up to 3.5 million pps (64-byte packets)
Switching capacity
4.8 Gbps
MAC address table size 8192 entries
Environment
Operating temperature 32°F to 104°F (0°C to 40°C)
Operating relative
15% to 95% @ 104°F (40°C), noncondensing
humidity
Nonoperating/Storage -40°F to 158°F (-40°C to 70°C)
temperature
Nonoperating/Storage 15% to 90% @ 149°F (65°C), noncondensing
relative humidity
Altitude
up to 10,000 ft. (3 km)
Acoustic
Power: 0 dB
Electrical
Maximum heat
17 BTU/hr (17.93 kJ/hr)
characteristics
dissipation
Voltage
100-240 VAC
DC voltage
12 V
Current
0.4 A
Maximum power rating4.8 W
Frequency
50/60 Hz
Notes
Maximum power rating and maximum heat dissipation are the worstcase theoretical maximum numbers provided for planning the
infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports
plugged in, and all modules populated.
The exact input voltage and frequency rating are determined by the
specific power adapter part number ordered. Please select the correct
power adapter country option.
DA - 13674 U.S. QuickSpecs — Version 7 — 10-28-2011
Page 10
QuickSpecs
HP 1410 Switch Series
Technical Specifications
Safety
Emissions
Immunity
Notes
Services
UL 60950-1; CSA 22.2 60950-1; IEC 60950-1:2005; EN 60950-1:2006 + A11:2009
FCC Rules Part 15, Subpart B Class A
Generic
EN 55022 CISPR 22
EN
EN 55024, CISPR 24
ESD
IEC 61000-4-2
Radiated
IEC 61000-4-3
EFT/Burst
IEC 61000-4-4
Surge
IEC 61000-4-5
Conducted
IEC 61000-4-6
Power frequency
IEC 61000-4-8
magnetic field
Voltage dips and
IEC 61000-4-11
interruptions
Harmonics
IEC 61000-3-2
Flicker
IEC 61000-3-3
IEEE 802.3az Energy Efficient Ethernet protocol is supported by the HP 1410-16 (J9662A) and
HP 1410-24 (J9663A) Switches only
3-year, 4-hour onsite, 13x5 coverage for hardware (UF797E)
3-year, 4-hour onsite, 24x7 coverage for hardware (UF798E)
1-year, post-warranty, 4-hour onsite, 13x5 coverage for hardware (HR846E)
1-year, post-warranty, 4-hour onsite, 24x7 coverage for hardware (HR847E)
4-year, 4-hour onsite, 13x5 coverage for hardware (UR820E)
4-year, 4-hour onsite, 24x7 coverage for hardware (UR821E)
5-year, 4-hour onsite, 13x5 coverage for hardware (UR822E)
5-year, 4-hour onsite, 24x7 coverage for hardware (UR823E)
3 Yr 6 hr Call-to-Repair Onsite (UW389E)
4 Yr 6 hr Call-to-Repair Onsite (UW390E)
5 Yr 6 hr Call-to-Repair Onsite (UW391E)
Refer to the HP website at: www.hp.com/networking/services for details on the service-level
descriptions and product numbers. For details about services and response times in your area,
please contact your local HP sales office.
HP 1410-24-2G Switch (J9664A)
Ports
Supports a maximum of 24 autosensing 10/100 ports plus 2 autosensing 10/100/1000 ports, or a
combination
Physical
Dimensions
6.65(d) x 13.23(w) x 1.73(h) in. (16.9 x 33.6 x 4.4 cm)
characteristics
Weight
2.98 lb. (1.35 kg)
Memory and processor 2 KB EEPROM; packet buffer size: 2.5 Mb
Mounting
Mounts in an EIA-standard 19 in. telco rack (hardware included); wall, desktop, and under-table
mounting
Performance
100 Mb Latency
< 5.6 µs (LIFO 64-byte packets)
1000 Mb Latency
< 2.2 µs (LIFO 64-byte packets)
Throughput
up to 6.5 million pps (64-byte packets)
Switching capacity
8.8 Gbps
MAC address table size 8192 entries
Environment
Operating temperature 32°F to 104°F (0°C to 40°C)
DA - 13674 U.S. QuickSpecs — Version 7 — 10-28-2011
Page 11
QuickSpecs
HP 1410 Switch Series
Technical Specifications
Electrical
characteristics
Operating relative
15% to 95% @ 104°F (40°C), noncondensing
humidity
Nonoperating/Storage -40°F to 158°F (-40°C to 70°C)
temperature
Nonoperating/Storage 15% to 90% @ 149°F (65°C), noncondensing
relative humidity
Altitude
up to 10,000 ft. (3 km)
Acoustic
Power: 0 dB
Maximum heat
37 BTU/hr (39.03 kJ/hr)
dissipation
Voltage
100-240 VAC
DC voltage
12 V
Current
0.9 A
Maximum power rating10.8 W
Frequency
Notes
Safety
Emissions
Immunity
Services
50/60 Hz
Maximum power rating and maximum heat dissipation are the worstcase theoretical maximum numbers provided for planning the
infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports
plugged in, and all modules populated.
The exact input voltage and frequency rating are determined by the
specific power adapter part number ordered. Please select the correct
power adapter country option.
UL 60950-1; CSA 22.2 60950-1; IEC 60950-1:2005; EN 60950-1:2006 + A11:2009
FCC Rules Part 15, Subpart B Class A
Generic
EN 55022 CISPR 22
EN
EN 55024, CISPR 24
ESD
IEC 61000-4-2
Radiated
IEC 61000-4-3
EFT/Burst
IEC 61000-4-4
Surge
IEC 61000-4-5
Conducted
IEC 61000-4-6
Power frequency
IEC 61000-4-8
magnetic field
Voltage dips and
IEC 61000-4-11
interruptions
Harmonics
IEC 61000-3-2
Flicker
IEC 61000-3-3
3-year, 4-hour onsite, 13x5 coverage for hardware (UF797E)
3-year, 4-hour onsite, 24x7 coverage for hardware (UF798E)
1-year, post-warranty, 4-hour onsite, 13x5 coverage for hardware (HR846E)
1-year, post-warranty, 4-hour onsite, 24x7 coverage for hardware (HR847E)
4-year, 4-hour onsite, 13x5 coverage for hardware (UR820E)
4-year, 4-hour onsite, 24x7 coverage for hardware (UR821E)
5-year, 4-hour onsite, 13x5 coverage for hardware (UR822E)
5-year, 4-hour onsite, 24x7 coverage for hardware (UR823E)
3 Yr 6 hr Call-to-Repair Onsite (UW389E)
4 Yr 6 hr Call-to-Repair Onsite (UW390E)
5 Yr 6 hr Call-to-Repair Onsite (UW391E)
DA - 13674 U.S. QuickSpecs — Version 7 — 10-28-2011
Page 12
QuickSpecs
HP 1410 Switch Series
Technical Specifications
Refer to the HP website at: www.hp.com/networking/services for details on the service-level
descriptions and product numbers. For details about services and response times in your area,
please contact your local HP sales office.
Standards and
General protocols
protocols
IEEE 802.1p Priority
(applies to all products in IEEE 802.3ab 1000BASE-T
series)
IEEE 802.3i 10BASE-T
IEEE 802.3u 100BASE-X
IEEE 802.3x Flow Control
IEEE 802.3z 1000BASE-X
DA - 13674 U.S. QuickSpecs — Version 7 — 10-28-2011
Page 13
QuickSpecs
HP 1410 Switch Series
Accessories
HP 1410 Switch series Cables
accessories
HP 0.5 m Multimode OM3 LC/LC Optical Cable
HP 1 m Multimode OM3 LC/LC Optical Cable
HP 2 m Multimode OM3 LC/LC Optical Cable
HP 5 m Multimode OM3 LC/LC Optical Cable
HP 15 m Multimode OM3 LC/LC Optical Cable
HP 30 m Multimode OM3 LC/LC Optical Cable
HP 50 m Multimode OM3 LC/LC Optical Cable
NEW HP 0.5 m PremierFlex OM3+ LC/LC Optical Cable
NEW HP 1 m PremierFlex OM3+ LC/LC Optical Cable
NEW HP 2 m PremierFlex OM3+ LC/LC Optical Cable
NEW HP 5 m PremierFlex OM3+ LC/LC Optical Cable
NEW HP 15 m PremierFlex OM3+ LC/LC Optical Cable
NEW HP 30 m PremierFlex OM3+ LC/LC Optical Cable
NEW HP 50 m PremierFlex OM3+ LC/LC Optical Cable
HP V1410-24G Switch (J9561A)
HP X121 1G SFP LC SX Transceiver
HP X121 1G SFP LC LX Transceiver
HP X111 100M SFP LC FX Transceiver
DA - 13674 U.S. QuickSpecs — Version 7 — 10-28-2011
AJ833A
AJ834A
AJ835A
AJ836A
AJ837A
AJ838A
AJ839A
BK837A
BK838A
BK839A
BK840A
BK841A
BK842A
BK843A
J4858C
J4859C
J9054C
Page 14
QuickSpecs
HP 1410 Switch Series
Accessory Product Details
NOTE: Details are not available for all accessories. The following specifications were available at the time of publication.
HP 0.5 m Multimode
OM3 LC/LC Optical
Cable (AJ833A)
Cabling
Cable type:
50/125 µm (core/cladding) diameter, mulitimode fiber optic, with
effective modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC
for distances of up to 300 m
Maximum distance:
10Gbps Transfer Rate (Ethernet): 300m
Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125
um fiber optic cable and Ethernet assembly with LC duplex connectors
on one end and LC duplex connectors on other end.
Notes
Services
Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ±
2.0um Coating diameter: 245 ± 10um
Optical glass: Bandwidth: For LED sources: 1500/500 MHz-km
@850/1300nm.
Optical glass: Bandwidth: For Laser sources: 2000/500 MHz-km
@850/1300nm. VCSEL Laser sources: 600 / 600 meters
@850/1300nm for Gigabit Ethernet compliant links.
CABLE: The cable is duplex zipcord graded index 50/125um
multimode optical fiber and designed to work in both the 850 and
1300 nm wavelength windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen
thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003
dB/M added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @
1310 nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg
Refer to the HP website at www.hp.com/networking/services for details
on the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP
sales office.
DA - 13674 U.S. QuickSpecs — Version 7 — 10-28-2011
Page 15
QuickSpecs
HP 1410 Switch Series
Accessory Product Details
HP 1 m Multimode OM3 Cabling
LC/LC Optical Cable
(AJ834A)
Cable type:
50/125 µm (core/cladding) diameter, mulitimode fiber optic, with
effective modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC
for distances of up to 300 m
Maximum distance:
10Gbps Transfer Rate (Ethernet): 300m
Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125
um fiber optic cable and Ethernet assembly with LC duplex connectors
on one end and LC duplex connectors on other end.
Notes
Services
Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ±
2.0um Coating diameter: 245 ± 10um
Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km
@850/1300nm.
Optical Glass: For Laser sources: 2000/500 MHz-km
@850/1300nm. VCSEL Laser sources: Shall achieve 600 / 600
meters @850/1300nm for Gigabit Ethernet compliant links.
CABLE: The cable is duplex zipcord graded index 50/125um
multimode optical fiber. The cable is designed to work in both the
850 and 1300 nm wavelength windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen
thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003
dB/M added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @
1310 nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg
Refer to the HP website at www.hp.com/networking/services for details
on the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP
sales office.
DA - 13674 U.S. QuickSpecs — Version 7 — 10-28-2011
Page 16
QuickSpecs
HP 1410 Switch Series
Accessory Product Details
HP 2 m Multimode OM3 Cabling
LC/LC Optical Cable
(AJ835A)
Cable type:
50/125 µm (core/cladding) diameter, mulitimode fiber optic, with
effective modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC
for distances of up to 300 m;
Maximum distance:
10Gbps Transfer Rate (Ethernet): 300m
Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125
um fiber optic cable and Ethernet assembly with LC duplex connectors
on one end and LC duplex connectors on other end.
Notes
Services
Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ±
2.0um Coating diameter: 245 ± 10um
Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km
@850/1300nm.
Optical Glass: For Laser sources: 2000/500 MHz-km
@850/1300nm. VCSEL Laser sources: Shall achieve 600 / 600
meters @850/1300nm for Gigabit Ethernet compliant links.
CABLE: The cable is duplex zipcord graded index 50/125um
multimode optical fiber. The cable is designed to work in both the
850 and 1300 nm wavelength windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen
thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003
dB/M added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @
1310 nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg
Refer to the HP website at www.hp.com/networking/services for details
on the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP
sales office.
DA - 13674 U.S. QuickSpecs — Version 7 — 10-28-2011
Page 17
QuickSpecs
HP 1410 Switch Series
Accessory Product Details
HP 5 m Multimode OM3 Cabling
LC/LC Optical Cable
(AJ836A)
Cable type:
50/125 µm core/cladding) diameter, mulitimode fiber optic, with effective
modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for
distances of up to 300 m;
Maximum distance:
10Gbps Transfer Rate (Ethernet): 300m
Cable Specs: This specification defines the detail requirements for a
tight buffered duplex fiber optic multimode OM3 50/125 um fiber optic
cable and Ethernet assembly with LC duplex connectors on one end
and LC duplex connectors on other end.
Notes
Services
Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ±
2.0um Coating diameter: 245 ± 10um
Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km
@850/1300nm.
Optical Glass: For Laser sources: 2000/500 MHz-km
@850/1300nm. VCSEL Laser sources: Shall achieve 600 / 600
meters @850/1300nm for Gigabit Ethernet compliant links.
CABLE: The cable is duplex zipcord graded index 50/125um
multimode optical fiber. The cable is designed to work in both the
850 and 1300 nm wavelength windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen
thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003
dB/M added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @
1310 nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg
Refer to the HP website at www.hp.com/networking/services for details
on the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP
sales office.
DA - 13674 U.S. QuickSpecs — Version 7 — 10-28-2011
Page 18
QuickSpecs
HP 1410 Switch Series
Accessory Product Details
HP 15 m Multimode
OM3 LC/LC Optical
Cable (AJ837A)
Cabling
Cable type:
50/125 µm (core/cladding) diameter, mulitimode fiber optic, with
effective modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC
for distances of up to 300 m;
Maximum distance:
10Gbps Transfer Rate (Ethernet): 300m
Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125
um fiber optic cable and Ethernet assembly with LC duplex connectors
on one end and LC duplex connectors on other end.
Notes
Services
Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ±
2.0um Coating diameter: 245 ± 10um
Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km
@850/1300nm.
Optical Glass: For Laser sources: 2000/500 MHz-km
@850/1300nm. VCSEL Laser sources: Shall achieve 600 / 600
meters @850/1300nm for Gigabit Ethernet compliant links.
CABLE: The cable is duplex zipcord graded index 50/125um
multimode optical fiber. The cable is designed to work in both the
850 and 1300 nm wavelength windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen
thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003
dB/M added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @
1310 nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg
Refer to the HP website at www.hp.com/networking/services for details
on the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP
sales office.
DA - 13674 U.S. QuickSpecs — Version 7 — 10-28-2011
Page 19
QuickSpecs
HP 1410 Switch Series
Accessory Product Details
HP 30 m Multimode
OM3 LC/LC Optical
Cable (AJ838A)
Cabling
Cable type:
50/125 µm (core/cladding) diameter, mulitimode fiber optic, with
effective modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC
for distances of up to 300 m;
Maximum distance:
10Gbps Transfer Rate (Ethernet): 300m
Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125
um fiber optic cable and Ethernet assembly with LC duplex connectors
on one end and LC duplex connectors on other end.
Notes
Services
Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ±
2.0um Coating diameter: 245 ± 10um
Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km
@850/1300nm.
Optical Glass: For Laser sources: 2000/500 MHz-km
@850/1300nm. VCSEL Laser sources: Shall achieve 600 / 600
meters @850/1300nm for Gigabit Ethernet compliant links.
CABLE: The cable is duplex zipcord graded index 50/125um
multimode optical fiber. The cable is designed to work in both the
850 and 1300 nm wavelength windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen
thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003
dB/M added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @
1310 nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg
Refer to the HP website at www.hp.com/networking/services for details
on the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP
sales office.
DA - 13674 U.S. QuickSpecs — Version 7 — 10-28-2011
Page 20
QuickSpecs
HP 1410 Switch Series
Accessory Product Details
HP 50 m Multimode
OM3 LC/LC Optical
Cable (AJ839A)
Cabling
Cable type:
50/125 µm (core/cladding) diameter, mulitimode fiber optic, with
effective modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC
for distances of up to 300 m;
Maximum distance:
10Gbps Transfer Rate (Ethernet): 300m
Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125
um fiber optic cable and Ethernet assembly with LC duplex connectors
on one end and LC duplex connectors on other end.
Notes
Services
Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ±
2.0um Coating diameter: 245 ± 10um
Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km
@850/1300nm.
Optical Glass: For Laser sources: 2000/500 MHz-km
@850/1300nm. VCSEL Laser sources: Shall achieve 600 / 600
meters @850/1300nm for Gigabit Ethernet compliant links.
CABLE: The cable is duplex zipcord graded index 50/125um
multimode optical fiber. The cable is designed to work in both the
850 and 1300 nm wavelength windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen
thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003
dB/M added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @
1310 nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg
Refer to the HP website at www.hp.com/networking/services for details
on the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP
sales office.
DA - 13674 U.S. QuickSpecs — Version 7 — 10-28-2011
Page 21
QuickSpecs
HP 1410 Switch Series
Accessory Product Details
HP 0.5 m PremierFlex Notes
OM3+ LC/LC Optical
Cable (BK837A)
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+
50/125um duplex cable and Ethernet assembly with LC duplex
connectors on each end.
Services
HP 1 m PremierFlex
OM3+ LC/LC Optical
Cable (BK838A)
Notes
• Core diameter: 50um ± 3um; Cladding diameter: 125um ± 2um;
Coating diameter: 245 ± 10um
• Bandwidth: 3000 MHz-km @ 850nm (Laser)
• Jacket Color: Blue
• Jacket Material: Riser Grade - Low Smoke Zero Halogen (LSZH)
thermoplastic.
• Boot Color: White
• Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable,
50/125um, Type OFNR (UL), LSZH, cUL OFN FT4, ROHS. Cable also
has a longitudal white stripe that runs the entire length of the cable.
• Insertion Loss: less than 0.5dB @ 850nm with LED source, 0.003dB/m
added for lengths >30m
• Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @ 1310
nm @ 23°C as tested in accordance with EIA 455-46
Refer to the HP website at www.hp.com/networking/services for details
on the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP
sales office.
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+
50/125um duplex cable and Ethernet assembly with LC duplex
connectors on each end.
Services
• Core Diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating
diameter: 245 ± 10um
• Bandwidth: 3000 MHz-km @ 850nm (Laser)
• Jacket Color: Blue
• Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH)
thermoplastic
• Boot Color: White
• Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable,
50/125um, Type OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also
has a longitudinal white stripe that runs the entire length of the cable.
• Insertion Loss: Less than 0.5dB @ 850nm with LED source,
0.003dB/m added for lengths >30m
• Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @
1310nm @ 23°C as tested in accordance with EIA 455-45
Refer to the HP website at www.hp.com/networking/services for details
on the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP
sales office.
DA - 13674 U.S. QuickSpecs — Version 7 — 10-28-2011
Page 22
QuickSpecs
HP 1410 Switch Series
Accessory Product Details
HP 2 m PremierFlex
OM3+ LC/LC Optical
Cable (BK839A)
Notes
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+
50/125um duplex cable and Ethernet assembly with LC duplex
connectors on each end.
Services
HP 5 m PremierFlex
OM3+ LC/LC Optical
Cable (BK840A)
Notes
• Core diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating
diameter: 245 ± 10um
• Bandwidth: 3000 MHz-km @ 850nm (Laser)
• Jacket Color: Blue
• Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH)
thermoplastic
• Boot Color: White
• Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable,
50/125um, Type OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also
has a longitudinal white stripe that runs the entire length of the cable.
• Insertion Loss: Less than 0.5dB @ 850nm with LED source,
0.003dB/m added for lengths >30m
• Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @
1310nm @ 23°C as tested in accordance with EIA 455-45
Refer to the HP website at www.hp.com/networking/services for details
on the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP
sales office.
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+
50/125um duplex cable and Ethernet assembly with LC duplex
connectors on each end.
Services
• Core diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating
diameter: 245 ± 10um
• Bandwidth: 3000 MHz-km @ 850nm (Laser)
• Jacket Color: Blue
• Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH)
thermoplastic
• Boot Color: White
• Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable,
50/125um, Type OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also
has a longitudinal white stripe that runs the entire length of the cable.
• Insertion Loss: Less than 0.5dB @ 850nm with LED source,
0.003dB/m added for lengths >30m
• Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @
1310nm @ 23°C as tested in accordance with EIA 455-45
Refer to the HP website at www.hp.com/networking/services for details
on the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP
sales office.
DA - 13674 U.S. QuickSpecs — Version 7 — 10-28-2011
Page 23
QuickSpecs
HP 1410 Switch Series
Accessory Product Details
HP 15 m PremierFlex
OM3+ LC/LC Optical
Cable (BK841A)
Notes
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+
50/125um duplex cable and Ethernet assembly with LC duplex
connectors on each end.
Services
HP 30 m PremierFlex
OM3+ LC/LC Optical
Cable (BK842A)
Notes
• Core diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating
diameter: 245 ± 10um
• Bandwidth: 3000 MHz-km @ 850nm (Laser)
• Jacket Color: Blue
• Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH)
thermoplastic
• Boot Color: White
• Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable,
50/125um, Type OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also
has a longitudinal white stripe that runs the entire length of the cable.
• Insertion Loss: Less than 0.5dB @ 850nm with LED source,
0.003dB/m added for lengths >30m
• Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @
1310nm @ 23°C as tested in accordance with EIA 455-45
Refer to the HP website at www.hp.com/networking/services for details
on the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP
sales office.
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+
50/125um duplex cable and Ethernet assembly with LC duplex
connectors on each end.
Services
• Core diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating
diameter: 245 ± 10um
• Bandwidth: 3000 MHz-km @ 850nm (Laser)
• Jacket Color: Blue
• Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH)
thermoplastic
• Boot Color: White
• Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable,
50/125um, Type OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also
has a longitudinal white stripe that runs the entire length of the cable.
• Insertion Loss: Less than 0.5dB @ 850nm with LED source,
0.003dB/m added for lengths >30m
• Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @
1310nm @ 23°C as tested in accordance with EIA 455-45
Refer to the HP website at www.hp.com/networking/services for details
on the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP
sales office.
DA - 13674 U.S. QuickSpecs — Version 7 — 10-28-2011
Page 24
QuickSpecs
HP 1410 Switch Series
Accessory Product Details
HP 50 m PremierFlex
OM3+ LC/LC Optical
Cable (BK843A)
Notes
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+
50/125um duplex cable and Ethernet assembly with LC duplex
connectors on each end.
Services
• Core diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating
diameter: 245 ± 10um
• Bandwidth: 3000 MHz-km @ 850nm (Laser)
• Jacket Color: Blue
• Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH)
thermoplastic
• Boot Color: White
• Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable,
50/125um, Type OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also
has a longitudinal white stripe that runs the entire length of the cable.
• Insertion Loss: Less than 0.5dB @ 850nm with LED source,
0.003dB/m added for lengths >30m
• Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @
1310nm @ 23°C as tested in accordance with EIA 455-45
Refer to the HP website at www.hp.com/networking/services for details
on the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP
sales office.
HP X121 1G SFP LC SX Ports
1 LC 1000BASE-SX port; Duplex: full only
Transceiver (J4858C)
Physical characteristics Dimensions: 2.24(d) x 0.54(w) x 0.48(h) in. (5.69 x 1.37 x 1.22 cm)
Weight: 0.04 lb. (0.02 kg)
A small form-factor
Transceiver form factor: SFP
pluggable (SFP) Gigabit Environment
Operating temperature: 32°F to 158°F (0°C to 70°C)
SX
Operating relative humidity: 5% to 85%, noncondensing
transceiver that provides
Nonoperating/Storage temperature: -40°F to 203°F (-40°C to 85°C)
a full-duplex Gigabit
Altitude: up to 10,000 ft. (3 km)
solution
Electrical
Power consumption typical: 0.4 W
up to 550 m on
characteristics
multimode fiber.
Power consumption maximum: 0.7 W
Cabling
Type:
62.5/125 µm or 50/125 µm (core/cladding) diameter, gradedindex, low metal content, multimode fiber optic, complying with
ITU-T G.651 and ISO/IEC 793-2 Type A1b or A1a, respectively;
Maximum distance:
Services
2-220 m (62.5 µm core diameter, 160 MHz*km bandwidth
2-275 m (62.5 µm core diameter, 200 MHz*km bandwidth
2-500 m (50 µm core diameter, 400 MHz*km bandwidth)
2-550 m (50 µm core diameter, 500 MHz*km bandwidth)
Cable length: 2-550m
Fiber type: Multi Mode
Refer to the HP website at www.hp.com/networking/services for details
on the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP
sales office.
DA - 13674 U.S. QuickSpecs — Version 7 — 10-28-2011
Page 25
QuickSpecs
HP 1410 Switch Series
Accessory Product Details
HP X121 1G SFP LC LX Ports
1 LC 1000BASE-LX port (IEEE 802.3z Type 1000BASE-LX); Duplex: full
Transceiver (J4859C)
only
Physical characteristics Dimensions: 2.24(d) x 0.54(w) x 0.486(h) in. (5.69 x 1.37 x 1.23 cm)
HP X121 1G SFP LC LX
Weight:0.04 lb. (0.02 kg)
Transceiver: An SFP
Environment
Operating temperature: 32°F to 158°F (0°C to 70°C)
format
Operating relative humidity: 0% to 85%, noncondensing
gigabit transceiver with
Nonoperating/Storage temperature: -40°F to 212°F (-40°C to 100°C)
LC connectors using LX
Altitude: up to 10,000 ft. (3 km)
technology.
Cabling
Type:
Either single mode or multimode; 62.5/125 µm or 50/125 µm
(core/cladding) diameter, graded-index, low metal content,
multimode fiber optic, complying with ITU-T G.651 and ISO/IEC
793-2 Type A1b or A1a, respectively; Low metal content, singlemode fiber-optic, complying with ITU-T G.652 and ISO/IEC 793-2
Type B1;
Maximum distance:
Notes
Services
2-550 m (multimode 62.5 µm core diameter, 500 MHz*km
bandwidth)
2-550 m (multimode 50 µm core diameter, 400 MHz*km
bandwidth)
2-550 m (multimode 50 µm core diameter, 500 MHz*km
bandwidth)
2-10,000 m (single-mode fiber)
A mode conditioning patch cord may be needed in some multimode fiber
installations.
Wavelength: 1310nm
Power Consumption: < 500mW Typical
Refer to the HP website at www.hp.com/networking/services for details
on the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP
sales office.
DA - 13674 U.S. QuickSpecs — Version 7 — 10-28-2011
Page 26
QuickSpecs
HP 1410 Switch Series
Accessory Product Details
HP X111 100M SFP LC Ports
FX Transceiver
(J9054C)
Physical
characteristics
Environment
Cabling
Notes
Services
1 LC 100BASE-FX port (IEEE 802.3u Type 100BASE-FX); Duplex: half
or full
Dimensions
2.7(d) x 0.54(w) x 0.48(h) in. (6.86 x 1.38 x
1.22 cm)
Weight
0.06 lb. (0.03 kg)
Operating temperature 32°F to 158°F (0°C to 70°C)
Operating relative
5% to 95%
humidity
Nonoperating/Storage -40°F to 185°F (-40°C to 85°C)
temperature
Nonoperating/Storage 5% to 85%
relative humidity
Altitude
up to 10,000 ft. (3 km)
Cable type:
62.5/125 ìm or 50/125 ìm (core/cladding) diameter, graded-index, low
metal content, multimode fiber optic, complying with ITU-T G.651 and
ISO/IEC 793-2 Type A1b or A1a, respectively;
Maximum distance:
• 2 km (full duplex) or 412 m (half duplex)
Transmitter wavelength: 1310nm
Power consumption is 1.1 watt maximum.
For supported platforms and minimum software requirements to support
this product, see the document titled "Support for the J9054B 100-FX
SFP-LC Transceiver" on the "ProCurve Mini-GBICs and SFPs" Manuals
Web page.
Refer to the HP website at: www.hp.com/networking/services for details
on the service-level descriptions and product numbers. For details
about services and response times in your area, please contact your
local HP sales office.
To learn more, visit: www.hp.com/networking
© Copyright 2010-2011 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change
without notice. The only warranties for HP products and services are set forth in the express warranty statements
accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP
shall not be liable for technical or editorial errors or omissions contained herein.
DA - 13674 U.S. QuickSpecs — Version 7 — 10-28-2011
Page 27
Download PDF
Similar pages