HP Integrity rx2660 Server

QuickSpecs
HP Integrity rx2660 Server
Overview
1.
2.
3.
4.
HP Integrity rx2660 System Overview (Top View)
6 pairs redundant system fans (3 cooling zones)
5. 3-slot I/O cage 3 PCI-x or 2 PCI-e; 1 PCI-x
8x DIMM slots
6. CPUs
N+1 power supplies
7. HDD cage
HP 8-port Smart Array SAS Controller (optional)
At A Glance
Standard System Features
Four Operating System support: HP UX 11i version 2 (September 2006 Update required for dual core processors); HP-UX 11i
version 3; Windows Server 2003 Enterprise Edition; Linux RHEL 4 U4 AS and ES, and SLES 10; OpenVMS (V8.3 minimum
version required)
Core 8 port Serial Attached SCSI (SAS) host bus adapter, supports up to two internal RAID 1 volumes (2×2 HDDs) and a disk
for global hot spare, for a maximum of five disks in RAIDed arrays for HP UX, OpenVMS, and Linux. The additional three
drives (of the maximum of eight drives supported) can be accessed normally, but not configured for RAID. Factory set up of
RAID 1 is supported. Please see rx2660 Ordering Guide for details. HP/UX Mirroring is available for all HDDs in HP UX
based systems and HP Volume Shadowing Level 1 is available for HDDs in OpenVMS based systems. Windows does not
support the embedded 8 port SAS host bus adapter. Windows based customers must select the 8 port Smart Array P400 Serial
Attached SCSI (SAS) controller, supports internal RAID 1, 5 and 6 configurations. The 8 port Smart Array P400 Serial Attached
SCSI (SAS) controller is supported by HP UX, OpenVMS, and Linux as an optional add on.
Core dual port 10/100/1000Base TX LAN (with auto speed sensing; RJ 45 connector, Wake On LAN support)
Integrated iLO2 Management Processor for remote management and HA monitoring
Telnet and web console via 10/100Base TX management LAN (RJ 45 connector)
DA - 12698
Worldwide — Version 29 — February 1, 2011
Page 1
QuickSpecs
HP Integrity rx2660 Server
Overview
Two RS 232 serial ports, one for console from the integrated iLO2 management processor and one from the processor
dependent hardware bus (PDH)
Factory integration of processors, memory, disk drives, removable media, I/O cards, and HP Universal 10000 G2 series
racks.
Rackmountable into 19 inch cabinets-HP Universal 10000 Series G2 racks as well as many third party racks, including field
integration into existing HP System E racks
Optional stand alone pedestal mount
Three year warranty with next business day on site
DA - 12698
Worldwide — Version 29 — February 1, 2011
Page 2
QuickSpecs
HP Integrity rx2660 Server
Standard Features
Minimum System
One 64 bit Intel Itanium processor: Either dual core 1.6 GHz/18 MB L3 cache (533 MHz front
side bus), dual core 1.4 GHz/12 MB L3 cache (533 MHz front side bus), or single core 1.6
GHz/6.0 MB L3 cache (533 MHz front side bus); or dual core 1.66 GHz/18 MB 9140M
processor with L3 cache (667 MHz front side bus), dual core 1.42 GHz/12 MB 9120N processor
with L3 cache (533 MHz front side bus), or single core 1.6 GHz/12.0 MB 9110N processor with
L3 cache (533 MHz front side bus).
One I/O card cage. Either all PCI X card cage (two 266 MHz/64 bit slots and one 133 MHz/64
bit slot) or Combo I/O card cage (two PCI Express slots with 4×333 MHz ropes and one 133
MHz PCI X slot). Windows systems must order the Combo (PCI Express and PC X) I/O card cage.
The PCI X only card cage is not supported with Windows.
2 GB PC2 4200 x4 single rank Registered DDR2 SDRAMs (2×1GB DIMMs)
Eight DIMM slots
One hot swap power supply
Maximum Server
Capacities
Two 64 bit Intel Itanium processors: Dual core 1.66 GHz/18 MB 9140M processor with L3 cache
(667 MHz front side bus), dual core 1.42 GHz/12 MB 9120N processor with L3 cache (533 MHz
front side bus), or single core 1.6 GHz/12.0 MB 9110N processor with L3 cache (533 MHz front
side bus).
32 GB PC2 4200 x4 single-rank Registered DDR2 SDRAMs (8×4 GB DIMMs)
Eight DIMM slots
Two hot swap power supplies, providing N+1 protection for power supplies and power input
Three IO adapter cards
One internal DVD ROM or DVD+RW drive
Eight internal hot plug Serial Attached SCSI (SAS) disks
Standard System Features
Four Operating System support: HP UX 11i version 2 (September 2006 Update required for dual
core processors); HP UX 11i version 3; Linux RHEL 4 U4 AS and ES, and SLES 10; OpenVMS
(V8.3 minimum version required); and Microsoft Windows Server 2003 Enterprise and Datacenter
Edition, Microsoft Windows Server 2008 for Itanium-based Systems, and Microsoft SQL Server
2005 and SQL Server 2008
Two Core IO Serial Attached SCSI (SAS) options, an embedded 8P SAS controller, and an
optional 8 port Smart Array P400 SAS host bus adapter. Windows only supports the 8 port Smart
Array P400 SAS host bus adapter.
Core dual port 10/100/1000Base TX LAN (with auto speed sensing; RJ 45 connector, Wake On
LAN support).
Integrated iLO2 Management Processor for remote management and HA monitoring.
Telnet and web console via 10/100Base TX management LAN (RJ 45 connector).
Two RS 232 serial ports, one for console from the integrated iLO2 management processor and
one from the processor dependent hardware bus (PDH).
Factory integration of processors, memory, disk drives, removable media, I/O cards, and HP
Universal 10000 G2 series racks.
Rackmountable into 19 inch cabinets-HP Universal 10000 Series G2 racks as well as many third
party racks, including field integration into existing HP System E racks.
Optional stand alone pedestal mount.
Three year warranty with next business day on site.
DA - 12698
Worldwide — Version 29 — February 1, 2011
Page 3
QuickSpecs
HP Integrity rx2660 Server
Standard Features
High Availability
N+1 Hot swap cooling (not available with OFS [Office Friendly Server) system]
One Hot swap power supply standard-optional second hot swap power supply for N+1 protection
(two included in OFS systems for reduction of acoustics
On line memory page deallocation
ECC protected DDR2 memory
Memory double chip spare to overcome single DRAM chip failures
Dynamic Processor resilience and deallocation
UPS power management
Hot Plug internal disks
Two Core IO Serial Attached SCSI (SAS) options, an integrated 8P SAS controller, and an optional
8 port Smart Array P400 SAS host bus adapter which comes with battery backed write cache
(BBWC) and 256MB of memory. Windows only supports the 8 port Smart Array P400 SAS host
bus adapter. When ordered the optional 8 port Smart Array P400 SAS host bus adapter is located
in a 'private' slot and does use one of the system PCI slots. A maximum of (1) Core IO SAS
controller connected to the embedded HDD's is supported on the rx2660 server.
Journal file system with HP UX
Auto reboot
HP Serviceguard for HP UX
HP Serviceguard Extension for RAC for HP UX
HP Serviceguard Extension for SAP for HP UX
Serviceguard Manager for HP UX and Linux Clusters
HP Event Monitoring Service
HA Monitors for HP UX
HA Toolkits for HP UX and Linux
HP Mirrordisk/UX
Extended Campus Cluster, HP Metrocluster, and HP Continentalclusters for HP UX
HP OpenVMS clusters
HP Volume Shadowing for OpenVMS
HP RMS Journaling for OpenVMS
HP System Insight Manager (SIM) for proactive fault management
Microsoft Cluster Service for Windows Server 2003 Enterprise and Datacenter Editions
HP StorageWorks Software for HP Integrity Servers running Windows Server 2003 Enterprise and
Datacenter Editions. Includes Cluster Extension XP and EVA, Continuous Access, Business Copy
and SQL Server Fast Recovery, and Storage Mirroring
HP StorageWorks Cluster Extension XP for Linux
Security
TPM (Trusted Platforms Module) option available
Separate LAN for system management
Password protection on console port
Disablement of remote console ports
SSL encryption on web console
DA - 12698
Worldwide — Version 29 — February 1, 2011
Page 4
QuickSpecs
HP Integrity rx2660 Server
Standard Features
Manageability-Monitor
Built-in Integrity iLO 2 Management Processor for comprehensive remote server management of
HP-UX, Linux, Windows and OpenVMS
Integrity iLO 2 Advanced Pack for Virtual Media (CD, DVD, and ISO image) support of HP-UX,
Windows and Linux, and Virtual KVM support of Windows
HP System Insight Manager (SIM)
HP Servicecontrol suite for HP-UX servers including tools for system administration, asset
management, and fault management
HP-UX kernel configuration for easy, dynamic kernel parameter changes
Manageability-Optimize
Process Resource Manager for HP-UX resource management
HP UX Workload Manager for HP-UX workload management based upon service level objectives
HP OpenView GlancePlus Pack
HP Intelligent Networking Pack for Windows
Remote Direct Memory Access (RDMA) pack for Windows
HP Performance Management Pack for Windows
Windows System Resource Manager (included with each copy of Windows Server 2003 Enterprise
Edition)
ManageabilityDeployment
HP Rapid Deployment Pack for Windows and Linux
DA - 12698
Worldwide — Version 29 — February 1, 2011
Page 5
QuickSpecs
HP Integrity rx2660 Server
Configuration
Processor Configuration
The HP Integrity rx2660 is a symmetrical multiprocessing (SMP) server supporting up to two high
performance 64 bit Itanium processors. Processor speeds cannot be mixed within the same system.
Processor Details
Single core Itanium processors:
Single-core 1.6-GHz with 12.0-MB Level 3 Cache 9110N processor
Dual core Itanium processor:
Dual core 1.42 GHz with 12 MB (6 MB per core) Level 3 Cache 9120N processor
Dual core 1.66 GHz with 18 MB (9 MB per core) Level 3 Cache 9140M processor
All processors support:
Level 2 Cache: 1 MB Instruction/256 KB Data per core
Level 1 Cache: 32 KB per core
400 MHz System Bus
Single bit cache error correction
50 bit physical addressing
64 bit virtual addressing
4 GB maximum page size
Memory Configuration
The HP Integrity rx2660 supports DDR (double data rate) SyncDRAM (synchronous dynamic random
access memory) DIMMs with ECC and chip spare protection. The HP Integrity rx2660 has eight DIMM
slots. A maximum of 32 GB is supported (8×4GB DIMMs).
Memory Loading Rules and Performance Guidelines
Memory must be installed in groups of two DIMMs, also known as pairs or modules
Each memory pair must consist of DIMMs of the same type: same capacity/density, same
organization, same number of ranks, and same speed
Memory be ordered in modules (pairs) of 2 GB (2×1GB), 4 GB (2×2GB), or 8 GB (2×4GB)
Minimum memory is 2 GB (2×1GB). NOTE: 2-GB is required for HP-UX 11i v3.
Maximum memory is 32-GB, using four 8 GB (2×4GB) memory pairs
Arrange DIMMs so that the pairs with the largest capacity are in the lowest numbered slots
For best performance, all DIMM slots should be populated with the same size DIMM.
Supported Memory Options
Description
2-GB chip spare PC2 4200 ECC x4 single rank Registered DDR2 SDRAM memory pair (2×1 GB DIMMs)
4-GB chip spare PC2 4200 ECC x4 single rank Registered DDR2 SDRAM memory pair (2×2 GB DIMMs)
8-GB chip spare PC2 4200 ECC x4 single rank Registered DDR2 SDRAM memory pair (2×4 GB DIMMs)
DA - 12698
Worldwide — Version 29 — February 1, 2011
Product Number
AD274A
AD275A
AD276A
Page 6
QuickSpecs
HP Integrity rx2660 Server
Configuration
Server Form Factors and The HP Integrity rx2660 is a 2U server. It comes in 3 form factors: rack mounted, OFS (Office Friendly
Rack Configuration
Server) and pedestal versions. The rack mounted and OFS versions have the same base model product
numbers with different options. The rack mounted versions are AH234A and AH235A options 001-003;
the OFS are AH234A and AH235A options 004-006
The OFS is a pedestal form factor with reduced acoustics for workstation replacement and/or office
environments. Note that the OFS does not support redundant fans or redundant power.
Please note that the pedestal version is not factory installed-it is a kit (AD251A) that must be assembled
on site.
The rack mounted version of the rx2660 is supported in HP 10000 Series G2 cabinets. For factory
integration order the Universal Rack Kit, AD253A, with 0D1 feature code. Sliding mounts and a cable
management arm will be installed with the server in a factory integrated rack.
The HP Integrity rx2660 can be installed in the field with the Universal Rack Kit (AD253A with B01
feature code). This kit contains the slide mounts, cable management arm, and all other hardware
needed to mount an rx2660 into a 19 inch cabinet.
Refer to the 10000 Series G2 Rack Best Practices Guide for information on rack deployment,
stabilization, and transportation. Go to http://www.hp.com/go/rackandpower for more information.
Non-HP Cabinets
For customers who choose to use non HP cabinets, the HP Integrity rx2660 provides simple options for
installation and HP field support. The HP Integrity rx2660 field rack kit (AD253A) contains adjustable
slide rails, allowing the server to be mounted in cabinets that use the four post EIA mounting system.
Once the server is mounted in a non HP cabinet, it must meet some simple criteria to ensure that HP
field personnel can fully support the rack environment.
Anti Tip-The
rack/cabinet must be solidly anchored to the floor both front and rear. This is usually
Tip
accomplished by anti tip feet or by direct bolting to the floor.
Air Flow-The
HP Integrity rx2660 uses front to back airflow to cool the unit. Thus a cabinet cannot
Flow
have a solid front or rear door. Solid doors may have to be removed or changed to an open
perforation pattern.
Cable Strain Relief-A
Relief proper method of strain relief must be used. This may force the elimination
of the rear door in some cases.
Front and Rear Access-For
proper cooling and ease of service access, HP recommends 32 inches
Access
of unobstructed floor space in the front and rear of rack installations. This recommendation
applies to both HP and third party racks and cabinets.
I/O Architecture
The HP Integrity rx2660 I/O architecture utilizes industry standard PCI X and PCI Express buses in a unique design for maximum
flexibility, I/O card availability, performance, scalability, and reliability.
The HP Integrity rx2660 I/O architecture consists of six dedicated I/O channels which provide up to 8.2 GB/s of I/O bandwidth
allocated across standard I/O connectivity (with the Combo I/O backplane option), a dedicated slot for an optional 8 port Smart
Array P400 Serial Attached SCSI (SAS) controller (mandatory with Windows based systems) and three open slots for additional,
optional I/O card choices. The diagrams above show how these channels allocate bandwidth to the open I/O slots and to the
integrated core I/O.
DA - 12698
Worldwide — Version 29 — February 1, 2011
Page 7
QuickSpecs
HP Integrity rx2660 Server
Configuration
The standard I/O connectivity is integrated on the rx2660 system board and includes an integrated HP 8 Internal Port SAS (Serially
Attached SCSI) Host Bus Adapter, two 1000Base TX LAN ports, an RN50 graphics port, three USB v2.0 ports, and one general RS
232 Serial Port. Additionally, there is a standard Integrity iLO2 Management Processor with a rear RS 232 Serial Port.
Each port of SAS Host Bus Adapter can be connected to a SAS hard disk drive. SAS is a point to point architecture, compared to
Ultra320 SCSI which is a bus based architecture. With SAS, each disk has its own individual 3 GB link. NOTE: That there are two
possible 'integrated' RAID controllers for the rx2660: AD248A#106 refers to the embedded SAS RAID controller. AD248A#130,
AD248A#530 and AD248A#540 refers to an add-in SAS p400 Smart Array card which occupies a 'private' slot (does not use one
of the system's PCI slots).
HP UX, OpenVMS, and Linux support the integrated HP 8 Internal Serial Attached SCSI host bus adapter (AD248A#106), which
supports a maximum of two RAID 1 volumes (2×2 HDDs) and a disk for global hotspare, for a maximum of five disks in RAIDed
arrays. The remaining three disks (of the maximum eight disks that are supported) can be accessed normally, but not configured for
RAID. Please note that MirrorDisk/UX is available for software mirroring on all HDDs in HP UX based systems, as HP Volume
Shadowing (software Raid 1) for HDDs in OpenVMS based systems. Windows does not support this integrated HP 8 Internal Port
SAS Host Bus Adapter. All Windows systems must order the HP 8 Port SAS Smart Array P400 Serial Attached SCSI (SAS) Controller
Card (AD248A#130, AD248A#530, and AD248A#540), which is also available as an optional choice for HP UX, OpenVMS, and
Linux systems. The HP 8 Port SAS Smart Array P400 Serial Attached SCSI (SAS) Controller is accommodated via a dedicated PCI
Express slot, which provides up to 1.3 GB/s of sustained bandwidth.
The HP 8 Port SAS Smart Array P400 Serial Attached SCSI (SAS) Controller Card supports RAID 1, 5 and 6. All eight disks can be
configured with this card for RAID 1, 5 and 6 in any combination. RAID 1 requires two identical HDDs, RAID 5 requires three
identical HDDs, and RAID 6 requires four identical HDDs. Factory configuration of a RAID set is available. Please see rx2660
Ordering Guide for details. The two standard 1000Base TX LAN ports support Wake On LAN.
There is a mandatory choice of only one of two internal I/O card cage options, each option provides three I/O slots for I/O
expansion within the system enclosure. The two I/O card cage options are an all PCI X Card Cage and a Combo Card Cage. The
all PCI X Card Cage provides two PCI X 266 MHz 64 bit I/O slots and one PCI X 133 MHz 64 bit I/O slots (AD246A). Please note
that this option (AD246A) is not supported with Windows based systems. Each slot of the AD246A has its own dedicated bus and its
own independent I/O channel. An independent channel provides improved I/O performance and error containment. Independence
protects each I/O card from bus hangs or extended latencies due to the failure or high bandwidth demands of other I/O cards.
Independence also ensures that each I/O card can achieve maximum throughput. The two 266 MHz slots provide 2.1 GB/s of
sustained bandwidth, while the one 133 MHz slot provides 1.1/GB/s of sustained bandwidth.
The Combination Card Cage (AD247A) provides two PCI Express x8 slots and one PCI X 133 MHz 64 bit I/O slot. Please note that
the AD247A is required for Windows based systems. Each slot of the AD247A has its own dedicated bus and its own independent
I/O channel. The two PCI Express slots 2.6 GB/s of sustained bandwidth, while the one 133 MHz slot provides 1.1 GB/s of
sustained bandwidth.
All I/O slots are keyed for 3.3V I/O cards. 5V cards are not supported in the HP Integrity rx2660. OLAR (On-line add/remove)
operations are not supported on the rx2660.
The chart below provides further details on the standard I/O.
DA - 12698
Worldwide — Version 29 — February 1, 2011
Page 8
QuickSpecs
HP Integrity rx2660 Server
Configuration
HP 8 Internal Port SAS
Host Bus Adapter Core
I/O. Supports up to 8
Internal SAS Disk Drives.
NOTE: Not supported on
Windows-based servers.
1000Base TX LAN Core
I/O.
Integrated on System
Board
RN50 Graphics (front or
rear connection), 3 USB
Ports (1 front, 2 rear), RS
232 General Serial Port
Integrity iLO2
Management Processor,
1 rear RS 232 Serial Port
Optional HP 8 Port SAS
Smart Array P400 Serial
Attached SCSI (SAS)
Controller Card
NOTE: This card is
mandatory for Windowsbased systems.
Integrated on System
Board
Integrated on System
Board
Bandwidth
512 MB/s, shared with
1000Base TX LAN Core
I/O
Bus Width
64 bits
Bus Speed
66 MHz
Slot Keying
3.3 Volts
512 MB/s, shared with
HP 8 Internal Port SAS
Host Bus Adapter Core
I/O.
133 MB/s, shared
among all functions
64 bits
66 MHz
3.3 Volts
32 bits
33 MHz
3.3 Volts
1.3 GB/s
64 bits
Integrated on System
Board
Private Slot
3.3 Volts
HP Integrity rx2660 HP-UX 11i Supported I/O Cards
I/O Card
Mass Storage Host Bus Adapters
PCIe 4Gb Fibre Channel / GbE-T HBA
combo
PCIe 2-port 4Gb Fibre Channel / 2port GbE-T HBA combo
PCIe 2-port 4Gb Fibre Channel / 2port GbE-SX HBA combo
HP PCIe 1 port 4 Gb/s Fibre Channel
HBA
HP PCIe 2 port 4 Gb/s Fibre Channel
HBA
PCI-X 266 MHz 1 channel 4 Gb/s
Fibre Channel
PCI-X 266 MHz 2 channel 4 Gb/s
Fibre Channel
PCIe 2 port 4 Gb/s Fibre Channel
PCI 2 channel Ultra320 SCSI
Product
Number
PCIe/
PCI-X
Boot
Support
AD221A
PCIe
AD222A
Maximum
Cards
Special Notes
Yes
2
HP-UX 11i v3 only
PCIe
Yes
2
HP-UX 11i v3 only
AD393A
PCIe
Yes
2
HP-UX 11i v3 only
AD299A
PCIe
Yes
LC
2
AD355A
PCIe
Yes
LC
2
AB378B
PCI-X
Yes
LC
1
AB379B
PCI-X
Yes
LC
3
AD300A
A7173A
PCIe
PCI-X
Yes
Yes
LC
VHDCI
2
3
DA - 12698
Connector
Type(s)
Worldwide — Version 29 — February 1, 2011
Page 9
QuickSpecs
HP Integrity rx2660 Server
Configuration
HP PCIe SC44Ge SAS HBA
PCI-X 2 channel Smart Array 6402
Ultra320
PCI-X 4 channel Smart Array 6404
Ultra320
PCIe Smart Array P800
HP1-port 8Gb PCIe FC SR QLogic
HBA
HP 2-port 8Gb PCIe FC SR QLogic
HBA
HP 1-port 8Gb PCIe FC SR Emulex
HBA
HP 2-port 8Gb PCIe FC SR Emulex
HBA
Local Area Network (LAN) Adapters
PCI-X 1-port 1000Base T
PCI-X 1-port 1000Base SX
PCI-X 2 port 1000Base SX
PCI-X 2 port 1000Base T
PCI-X 4-port 1000Base T Gbit Adapter
PCI-X 266 MHz 1 port 10 GbE
AH303A
A9890A
PCIe
PCI-X
Yes
Yes
VHDCI
2
3
A9891A
PCI-X
Yes
VHDCI
3
AD335A
AH400A
PCIe
PCIe
Yes
Yes
Mini SAS
2
2
HP-UX 11i v3 only
AH401A
PCIe
Yes
2
HP-UX 11i v3 only
AH402A
PCIE
Yes
2
HP-UX 11i v3 only
AH403A
PCIe
Yes
2
HP-UX 11i v3 only
AD331A
AD332A
A7011A
A7012A
AB545A
AD385A
PCI-X
PCI-X
PCI-X
PCI-X
PCI-X
PCI-X
Yes
Yes
Yes
Yes
Yes
Yes
RJ-45
LC
Duplex SC
RJ-45
RJ-45
Duplex LC
3
3
3
3
3
3/1
HP PCIe 2 port 1000Base T card
HP PCIe 2 port 1000Base SX card
HP PCI e 10GbE SR card
PCIe 4 port HP NC364T Gbit Adapter
Wide Area Network (WAN) Adapters
2 port Programmable Serial Interface
(PSI)
X.25/Frame Relay/SDLC
AD337A
AD338A
AD386A
AD339A
PCIe
PCIe
PCIe
PCIe
Yes
Yes
Yes
Yes
RJ-45
Duplex SC
2
2
2
2
J3525A
PCI-X
No
RS 530, RS
232, V.35,
RS 449 or
X.21
3
AH304A
AB286C
PCIe
PCI-X
No
No
Multi function Cards (Mass Storage/LAN)
PCI-X 2 port 1000Base T/2 port
AB290A
Ultra320 SCSI Multi function Adapter
PCI-X
Yes
A9782A
PCI-X
Yes
AD193A
PCI-X
Yes
Cluster Interconnect
PCIe 2 port 4X DDR Fast IB HCA
PCI-X 2 port 4x Fabric (HPC) Adapter
PCI-X 2 Gb Fibre Channel/1000Base
SX
HP PCI-X 1 port 4 Gb Fibre Channel
and 1 port 1000Base T Adapter
DA - 12698
4x
Infiniband
Copper
2
3
SCSI LVD/SE
LAN - RJ-45
LC
3
(1) LC, (1)
RJ-45
3
3 for rack version; 1 for
OFS
HP-UX 11i v3 only
3
Worldwide — Version 29 — February 1, 2011
Page 10
QuickSpecs
HP Integrity rx2660 Server
Configuration
HP PCI-X 2 port 4 Gb Fibre Channel
and 2 port 1000Base T Adapter
HP PCIe 1-port 4Gb Fibre Channel
and 1-port 1000BaseT Adapter
HP PCIe 2-port 4Gb Fibre Channel
and 2-port 1000BaseT Adapter
HP PCIe 2-port 4Gb Fibre Channel
and 2-port 1000BaseT Adapter
Additional Interface Cards
PCI 8-port Serial MUX Adapter
PCI 64-port Serial MUX Adapter
16-port RS-232 RJ45 Port Module
AD194A
PCI-X
Yes
AD221A
PCIe
AD222A
(2) LC, (2)
RJ-45
3
-
Yes
2
HP-UX 11i v3 only
PCIe
Yes
2
HP-UX 11i v3 only
AD393A
PCIe
Yes
2
HP-UX 11i v3 only
AD278A
AD279A
AD280A
PCI-X
PCI-X
PCI-X
No
No
No
3
3
4 per
AD279A
16-port RS-232 DB25 Port Module
AD281A
PCI-X
No
HP PCI Audio Card
HP 2D PCI-X graphics card
AD317A
AH391A
PCI-X
PCI-X
No
No
AD280A #001 Port
Module Power Supply,
required on Port Module
(3) and Port Module (4)
connected to an AD279A
64P MUX adapter.
4 per
AD281A #001 Port
AD279A
Module Power Supply,
required on Port Module
(3) and Port Module (4)
connected to an AD279A
64P MUX adapter.
1
Factory Integration Only
PCI-X only
AH391A offers 2D
backplane: graphics support. Support
2
available for HP UX v3
Combo
and v2
backplane:
1
HP Integrity rx2660 Windows Server 2003 Supported I/O Cards
NOTE: While ordering Windows Server 2008, do not mix differing brands of HBAs (Emulex and QLogic) within the same server
configuration in an MPIO environment. This is to avoid issues which occur when different Fibre Channel HBAs are used within the
same server which support different I/O max transfer packet sizes in an MPIO environment. For example, the Emulex Fibre Channel
HBAs support a max I/O transfer packet size of 1MB and the QLogic Fibre Channel HBAs support a max I/O transfer packet size of
2MB. Mixing these two cards in an MPIO configuration can cause the system to hit a BSOD 0X000000D1 with a reference to
elxstor.sys
This applied to the following products:
Emulex:
HP StorageWorks single port 8 Gigabit PCI-e FC Emulex HBA (AH402A)
HP StorageWorks dual port 8 Gigabit PCI-e FC Emulex HBA (AH403A)
HP StorageWorks 2 Gb Fibre Channel HBA (AB232A)
HP StorageWorks 2 Gb, 64-Bit/133 MHz PCI-X-to-Fibre Dual Channel HBA (AB466A)
HP StorageWorks 2 Gb, 64-Bit/133 MHz PCI-X-to-Fibre Single Channel HBA (AB467A)
HP StorageWorks 4 Gb Single Port 64-bit 266 MHz Fibre Channel HBA (AD167A)
HP StorageWorks 4 Gb Dual Port 64-bit 266 MHz Fibre Channel HBA (AD168A)
DA - 12698
Worldwide — Version 29 — February 1, 2011
Page 11
QuickSpecs
HP Integrity rx2660 Server
Configuration
HP StorageWorks FC2142 PCIe Single Port 4 Gb Fibre Channel adapter (A8002A)
HP StorageWorks FC2242 PCIe Dual Port 4 Gb Fibre Channel adapter (A8003A)
QLogic:
HP StorageWorks single port 8 Gigabit PCI-e FC QLogic HBA (AH400A)
HP StorageWorks dual port 8 Gigabit PCI-e FC QLogic HBA (AH401A)
HP StorageWorks 4 Gb Single Port 64-bit 266 MHz Fibre Channel HBA (AB429A)
HP StorageWorks 4 Gb Dual Port 64-bit 266 MHz Fibre Channel HBA (AB379A)
HP StorageWorks 4 Gb Dual Port 64-bit 266 MHz Fibre Channel HBA (AB379B)
HP StorageWorks FC1142 PCIe Single Port 4 Gb Fibre Channel adapter (AE311A)
HP StorageWorks AD300A PCIe Dual Port 4 Gb Fibre Channel adapter (AD300A)
I/O Card
Mass Storage Host Bus Adapters
PCI-X 1 port 4 Gb/s Fibre Channel
PCI-X 266 MHz 2 port 4 Gb/s Fibre
Channel
PCIe 1 port 4 Gb/s Fibre Channel
PCI-X 1-port 4-GB/s Fibre Channel
PCI-X 1 port 4 GB/s Fibre Channel
PCI-X 2 port 4 GB/s Fibre Channel
PCIe 2 port 4 Gb/s Emulex Fibre
Channel
PCIe 1 port 4 Gb/s Emulex Fibre
Channel
PCI 2 channel Ultra320 SCSI
PCIe Smart Array P800
PCIe Smart Array P500
PCI-X 1 port 4 Gb/s Fibre Channel
HP PCIe 1-port 8Gb FC SR (QLogic)
HBA
HP PCIe 2-port 8Gb FC SR (QLogic)
HBA
HP PCIe 1-port 8Gb FC SR (Emulex)
HBA
HP PCIe 2-port 8Gb FC SR (Emulex)
HBA
Local Area Network (LAN) Adapters
HP PCI-X 2-port 1000Base-SX (optical)
Gigabit Adapter
PCI 2 port 1000Base TX
HP PCIe 2 port 1000Base T card
HP PCIe 2 port 1000Base SX card
Product
Number
PCIe/
PCI-X
Boot
Support
Connector
Type(s)
Maximum
Cards
AB429A
AB379B
PCI-X
PCI-X
Yes 1
Yes 1
LC
LC
1
1
AE311A
AD300A
AD167A
AD168A
A8003A
PCIe
PCIe
PCI-X
PCI-X
PCIe
Yes 1
Yes 1
Yes 1
Yes 1
Yes 1
LC
LC
LC
LC
LC
2
2
1
1
2
A8002A
PCIe
Yes 1
LC
2
A7173A
AD335A
PCI-X
PCIe
Yes
Yes 2
VHDCI
Mini SAS
1
2
AH226A
AB429A
AH400A
PCIe
PCI-X
PCIe
Yes
Yes 1
Yes
Mini SAS
LC
2
1
2
AH401A
PCIe
Yes
2
AH402A
PCIe
Yes
2
AH403A
PCIe
Yes
2
A7011A
PCI-X
Yes
1
A9900A
AD337A
AD338A
PCI-X
PCIe
PCIe
Yes
Yes
Yes
DA - 12698
RJ-45
RJ-45
Duplex SC
Special Notes
Only 1 will be factory
integrated.
1
2
2
Worldwide — Version 29 — February 1, 2011
Page 12
QuickSpecs
HP Integrity rx2660 Server
Configuration
1Boot
2Boot
from fibre channel is supported, however not available directly from factory. Boot support must be configured in field.
from external storage only.
HP Integrity rx2660 Red Hat Enterprise Linux AS and ES Supported I/O Cards
I/O Card
Mass Storage Host Bus Adapters
PCI-X Smart Array P600 Serial
Attached SCSI (SAS) Controller
PCI-X 1 port 4 Gb/s Fibre Channel
PCI-X 266 MHz 2 port 4 Gb/s Fibre
Channel
PCIe 1 port 4 Gb/s Fibre Channel
PCIe 2 port 4 Gb/s Fibre Channel
PCI-X 1 port 4 GB/s Fibre Channel
PCI-X 2 port 4 GB/s Fibre Channel
PCIe 2 port 4 Gb/s Emulex Fibre
Channel
PCIe 1 port 4 Gb/s Emulex Fibre
Channel
PCI 2 channel Ultra320 SCSI
HP PCIe SC44Ge SAS HBA
512 MB cache memory upgrade for
SA P600 controller
PCIe Smart Array P800
PCIe Smart Array P500
Local Area Network (LAN) Adapters
PCIe 4-Gb Fibre Channel/GbE-T HBA
combo
PCIe 2-port 4-Gb Fibre Channel/2port GbE-T HBA combo
PCIe 2-port 4-Gb Fibre Channel/2port GbE-SX HBA combo
HP PCI-X 2-port 1000Base-SX (optical)
Gigabit Adapter
PCI 2 port 1000Base TX
HP PCI-X 266MHz 10GigE SR Card
HP PCIe 2 port 1000Base T card
HP PCIe 2 port 1000Base SX card
Product
Number
PCIe/
PCI-X
Boot
Support
Connector
Type(s)
Maximum
Cards
337972
B21
AB429A
AB379B
PCI-X
Yes
SFF8470
1
PCI-X
PCI-X
Yes
Yes
LC
1
1
AE311A
AD300A
AD167A
AD168A
A8003A
PCIe
PCIe
PCI-X
PCI-X
PCIe
Yes
Yes
Yes
Yes
Yes
LC
LC
LC
LC
LC
2
2
1
1
2
A8002A
PCIe
Yes
LC
2
A7173A
AH303A
372538B21
AD335A
PCI-X
PCIe
PCI-X
Yes
No
N/A
VHDCI
N/A
1
2
N/A
PCIe
Yes
Mini SAS
2
AH226A
PCIe
Yes
Mini SAS
2
AD221A
PCIe
Yes
2
AD222A
PCIe
Yes
2
AD393A
PCIe
Yes
2
A7011A
PCI-X
Yes
1
A9900A
AD385A
AD337A
AD338A
PCI-X
PCI-X
PCIe
PCIe
Yes
Yes
Yes
Yes
DA - 12698
RJ-45
RJ-45
Duplex SC
Special Notes
Only 1 will be factory
integrated.
1
1
2
2
Worldwide — Version 29 — February 1, 2011
Page 13
QuickSpecs
HP Integrity rx2660 Server
Configuration
For Infiniband support with Linux, please see the HPC Cluster Platform 6000 at www.hp.com/go/hptc.
* Boot from external storage only.
HP Integrity rx2660 OpenVMS Supported I/O Cards
I/O Card
Product
Number
PCIe/
PCI-X
Boot
Support
Connector
Type(s)
Maximum
Cards
AD299A
PCIe
Yes
LC
2
AD355A
PCIe
Yes
LC
2
PCI-X 266 MHz 1 channel 4 Gb/s
AB378B
Fibre Channel
PCI-X 266 MHz 2 channel 4 Gb/s
AB379B
Fibre Channel
PCIe 2 port 4 Gb/s Fibre Channel
AD300A
PCI 2 channel Ultra320 SCSI
A7173A
HP PCIe SC44Ge SAS HBA
AH303A
PCI-X 2 channel Smart Array 6402
A9890A
Ultra320
PCI-X 4 channel Smart Array 6404
A9891A
Ultra320
PCIe Smart Array P800
AD335A
Local Area Network (LAN) Adapters
PCI-X 1 port 1000Base T
AD331A
PCI-X 1-port 1000Base-SX
AD332A
PCI-X 2 port 1000Base SX
A7011A
PCI-X 2 port 1000Base T
A7012A
PCI-X 4 port 1000Base T Gbit Adapter AB545A
HP PCI-X 266MHz 10GigE SR Card
AD385A
HP PCIe 2 port 1000Base T card
AD337A
HP PCIe 2 port 1000Base SX card
AD338A
PCIe 4 port HP NC364T Gbit Adapter AD339A
Multi-Function Cards (Mass Storage/LAN)
PCI-X 2 port 1000Base T/2 port
AB290A
Ultra320 SCSI Multi function Adapter
PCI-X
Yes
LC
3
PCI-X
Yes
LC
3
PCIe
PCI-X
PCIe
PCI-X
Yes
Yes
Yes
Yes
LC
VHDCI
VHDCI
2
3
2
2
PCI-X
Yes
VHDCI
1
PCIe
Yes
Mini SAS
2
PCI-X
PCI-X
PCI-X
PCI-X
PCI-X
PCI-X
PCIe
PCIe
PCIe
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
RJ-45
LC
Duplex SC
RJ-45
RJ-45
3
3
3
3
2
2
2
2
2
PCI-X
Yes
2
SCSI bootable
PCI-X 2 Gb Fibre Channel/1000Base
SX
HP PCI-X 1 port 4 Gb Fibre Channel
and 1 port 1000Base T Adapter
HP PCI-X 2 port 4 Gb Fibre Channel
and 2 port 1000Base T Adapter
A9782A
PCI-X
Yes
SCSI LVD/SE
LAN - RJ-45
LC
3
FC bootable
AD193A
PCI-X
Yes
2
FC bootable
AD194A
PCI-X
Yes
(1) LC, (1)
RJ-45
(2) LC, (2)
RJ-45
2
FC bootable
Mass Storage Host Bus Adapters
HP PCIe 1 port 4 Gb/s Fibre Channel
HBA
HP PCIe 2 port 4 Gb/s Fibre Channel
HBA
DA - 12698
RJ-45
Duplex SC
Worldwide — Version 29 — February 1, 2011
Special Notes
Page 14
QuickSpecs
HP Integrity rx2660 Server
Configuration
HP PCIe 1-port 4Gb Fibre Channel
and 1-port 1000BaseT Adapter
HP PCIe 2-port 4Gb Fibre Channel
and 2-port 1000BaseT Adapter
HP PCIe 2-port 4Gb Fibre Channel
and 2-port 1000BaseT Adapter
Additional Interface Cards
HP 2D PCI-X graphics card
AD221A
PCIe
Yes
2
AD222A
PCIe
Yes
2
AD393A
PCIe
Yes
2
AH391A
PCI-X
No
PCI-X only
AH391A offers 2D
backplane: graphics support. Support
2
available for OpenVMS
Combo
backplane:
1
Internal Supported Storage Devices
Product Number
Device
Internal Disk Drives (Optional - Maximum 8)
72-GB 15K RPM SAS (Serial Attached SCSI) 2.5" Small Form Factor Hot Plug Disk
AD379A
146-GB 10K RPM SAS (Serial Attached SCSI) 2.5" Small Form Factor Hot Plug Disk
AD333A
HP Integrity 146GB 15K SAS SFF 3GB DP
AM302A
Removable Media Drive (Optional – Maximum 1)*
DVD ROM drive, Slimline
AD142A
DVD+RW drive, Slimline (3rd party software must be purchased to write to DVDs if Windows is the operating
AD143A
system. For HP-UX 11iv2, only DVD+R and DVD+RW media is supported. CD media is NOT supported)
*DVD drive required for OpenVMS and Windows configurations. Third party software required to support DVD write with Windows.
Accessory Products
HP Integrity Thin-Client Bundle
NOTE: AB300E includes T5550 Thin-Client console, a 17inch Display and keyboard/mouse.
Displays
HP Compaq LE1711 17-inch LCD Monitor
HP Compaq LE1911 19-inch LCD Monitor
HP Compaq LA2205wg 22-inch Widescreen LCD Monitor
HP Compaq LA2405wg 24-inch Widescreen LCD Monitor
Keyboard
HP USB Standard Keyboard
Mouse
HP USB Optical Scroll Mouse
Product Number
AB300E
EM886AA
EM887AA
NM274AA
NL773AA
DT528A
DC172B
Integrated Multi-function The integrated multi function I/O provides core I/O functionally and includes the management
Core I/O
processor, which provides remote management and high availability monitoring capabilities.
DA - 12698
Worldwide — Version 29 — February 1, 2011
Page 15
QuickSpecs
HP Integrity rx2660 Server
Configuration
Core I/O
Integrity
ntegrity Integrated Lights
Out (iLO2) Management
Processor Functionality
Two 10/100/1000Base T LAN with RJ 45 connector-Supports LAN boot for operating system
installation and wake on LAN capability
HP 8 Internal Port SAS (Serial Attach SCSI) Host Bus Adapter, supports up to 8 internal SAS disk
drives. Windows does not support the integrated SAS Host Bus Adapter. Windows customers must
select the optional HP 8 Port SAS Smart Array P400 RAID controller.
May select factory configured RAID. For HP-UX, OpenVMS, and Linux based systems, a maximum
of two RAID 1 volumes (2×2 HDDs) and a disk for global hotspare, for a maximum of five disks
in RAIDed arrays, is supported. The remaining three disks (of the maximum eight disks that are
supported) can be accessed normally, but not configured for RAID. The HP 8 Port SAS Smart Array
P400 RAID controller, supported in a PCI Express slot reserved for the RAID controller only,
supports RAID 1, 5 and 6. The RAID controller is required for all Windows based systems
(Windows does not support the integrated HP 8 Internal Port SAS host bus adapter), and is
optional for HP UX, OpenVMS, Linux based systems. The maximum of eight disks can be
configured for RAID 1, 5 and 6 in any combination. RAID 1 requires two identical HDDs, RAID5
requires three identical HDDs, and RAID 6 requires four identical HDDs. Factory configuration of
a RAID set is available.
Three USB 2.0 style A ports (USB 1.1 compatible); one front port, two rear ports
One general purpose serial ports; an additional serial port is available for the integrated iLO2
Management Processor
Telnet and web console via 10/100Base TX management LAN (RJ 45 connector)
Dedicated 10/100BaseTX LAN port for LAN console and embedded web console access
One RS 232 serial port for local console
Password protected console ports
Console mirroring between all local, modem, LAN, and web consoles
Remote power up and power down control
Configurable remote access control
Event notification to system console-Provides connectivity, information, and support for HP UX tools
(such as STM and EMS) to notify by email, pager and/or HP response centers.
Interface to system monitoring and diagnostic hardware via an internal IC bus
Secure Sockets Layer security on web console
Support for Integrity Integrated Lights Out (iLO2) Advanced Pack version 2 activation key and
license (AD301A). Firmware license installs on the integrated Processor Management Card.
Integrity Lights Out (iLO2) Advanced Pack provides additional remote management capabilities,
including LDAP directory services, Virtual Media (CD, DVD, and ISO impage) for HP-UX, Windows,
and Linux and Integrated Remote Console (Virtual Keyboard, Video, and Mouse) for Windows
The RN50 integrated chip provides basic graphic capabilities. One VGA port is supported, with
optional connection from front or rear of the system.
Supported resolutions and refresh rates include:
Operating System Minimum
Resolution
HP-UX
1024x768
Linux
1024x768
Windows
640x480
OpenVMS
640x480
DA - 12698
Refresh Rate
75 Hz
75 Hz
75 Hz
60 Hz
Maximum
Resolution
1920x1200
1920x1200
1600x1200
1920x1200
Worldwide — Version 29 — February 1, 2011
Refresh Rate
75 Hz
75 Hz
75 Hz
75 Hz
Page 16
QuickSpecs
HP Integrity rx2660 Server
Configuration
System Console
Configurations
The HP Integrity rx2660's integrated iLO2 Management Processor provides six methods for console
connections.
SSL secured Web console accessible through the 10/100Base T management LAN
Standard telnet connections accessible through the 10/100Base T management LAN
Local VT100 or hpterm terminal, or VT100 or hpterm emulator via local RS 232 serial connection
Remote VT100 or hpterm terminal, or VT100 or hpterm emulator via external modem
VGA graphics console. Keyboard and mouse connections are provided by USB. OpenVMS doesn't
support VGA console for boot operations, but supports VGA device for graphics use after boot.
Integrated Remote Console (virtual KVM) through the iLO 2 Advanced Pack (Windows systems
only).
Internal Disk and Media
Drives
The HP Integrity rx2660 supports up to eight internal Serial Attached SCSI (SAS) 2.5 inch hot plug
small form factor hard disk drives
An 8 internal port host bus adapter provides 8 ports, 1 port per SAS disk, for point to point
connection from the adapter to the disk. This means that each disk has its own 3 GB link.
Factory configured RAID is available. For HP-UX, OpenVMS, and Linux based systems, a
maximum of two RAID 1 volumes (2×2 HDDs) and a disk for global hot spare, for a maximum of
five disks in RAIDed arrays, is supported. The remaining three disks (of the maximum eight disks
that are supported) can be accessed normally, but not configured for RAID. The optional HP 8
Port SAS Smart Array P400 RAID controller, supported in a PCI Express slot reserved for the RAID
controller only, supports RAID 1, 5 and 6. The RAID controller is required for all Windows based
systems (Windows does not support the integrated HP 8 Internal Port SAS host bus adapter), and is
optional for HP-UX, OpenVMS, Linux based systems. The maximum of eight disks can be
configured for RAID 1, 5 and 6 in any combination. RAID 1 requires two identical HDDs, RAID5
requires three identical HDDs, and RAID 6 requires four identical HDDs. Factory configuration of
a RAID set is available. Please see rx2660 Ordering Guide for details.
Mirrordisk/UX is available for software mirroring on all HDDs in HP UX based systems, and HP
Volume Shadowing (software Raid 1) is available for all HDDs in OpenVMS-based systems.
Cables required to connect the internal disk drives to the host bus adapter are shipped with the
system; no need to order separately.
36-GB 15K, 72-GB 15K, 146-GB 10K, and 300GB 10K Serial Attached SCSI (SAS) disks are
supported. 300 GB 10K SAS disks will be supported in a future release (Q2 FY09).
Optical media drives include a DVD ROM (AD142A) and DVD+RW (AD143A). A DVD drive is
required for all OpenVMS, Linux, and Windows configurations. Third party software (not included
with the AD143A) is required to support DVD write with Windows on AD143A. . 3rd party
software must be purchased to write to DVDs if Windows is the operating system. For HP-UX
11iv2, only DVD+R and DVD+RW media is supported. CD media is NOT supported.
DA - 12698
Worldwide — Version 29 — February 1, 2011
Page 17
QuickSpecs
HP Integrity rx2660 Server
Configuration
HP Integrity Trusted
Platform Module
The rx2660 has an accessory option for an embedded security chip - the Trusted Platforms Module
(TPM) - product number AB404A. HP-UX Trusted Computing Services (HP-UX TCS) provides software
support for the TPM when running HP-UX 11i v2. By providing a low-cost embedded security chip option
(known as a Trusted Platform Module) in its zx2-based Integrity servers (rx2660, rx3600, and rx6600),
HP has established a foundation for strong protection of sensitive information - including cryptographic
keys. Built around industry standards, the Trusted Platform Module (TPM) provides a basis for key storage
by securely generating and storing cryptographic keys. HP-UX 11i TCS takes this a step further by
providing the necessary infrastructure for managing the TPM, as well as integrating it into select features
such as HP-UX Encrypted Volumes and File Systems (EVFS).
Using HP-UX TCS with EVFS:
Using HP-UX TCS to make the unattended boot capability of EVFS more secure is an important example
of how HP-UX TCS can be integrated with other applications to enhance security. For more information
see the "Protecting EVFS Keys with HP-UX TCS" chapter in the "HP-UX Trusted Computing Services
Administrators Guide" available in the HP-UX Trusted Computing Services section at:
http://docs.hp.com/en/internet.html
Please note that HP-UX 11iTCS requires:
(1) An HP zx2-based Integrity server (rx2660, rx3600, or rx6600) with a TPM installed, running HP-UX
11iv2 September 2006 release or later
(2) Installation of kernel patch PHKL_35428
To download TCS and EVFS, please see the HP-UX Software Depot web page at: http://software.hp.com
HP Integrity rx2660 Power The HP Integrity rx2660 provides a high level of integrated power protection:
Subsystem
N+1 redundant hot swap power supplies
N+1 redundant AC power input protection with electrical phase isolation
Power monitoring and control
The HP Integrity rx2660 supports a second hot swap power supply for N+1 protection. One power
supply is shipped as a standard part of every system and is required for correct operation. The hot swap
design allows for the online replacement of a power supply when N+1=2 supplies are configured in the
server.
The HP Integrity rx2660 provides an independent power input receptacle for each power supply
(c13/C14 type). The independent design provides protection against losing the connection from a power
cord or breaker. The HP Integrity rx2660 power cords should always be plugged into separate breakers
whenever possible.
DA - 12698
Worldwide — Version 29 — February 1, 2011
Page 18
QuickSpecs
HP Integrity rx2660 Server
Technical Specifications
Server model number
Server product numbers
rx2660
2 processor/4 core capable HP Integrity rx2660 server base system with two
AH235A
processor modules:
Configure with two 1.6 GHz/12 MB single core 9110N processor modules
001
Configure with two 1.42 GHz/12 MB dual core 9120N processor modules
002
Configure with two 1.66 GHz/18 MB dual core 9140M processor modules
003
In addition to two processor modules, the base system includes one power supply
(second supply can be added for redundancy-AD254A), 2×10/100/1000 GbE ports
(supports Wake On LAN), and 8 port SAS controller. Must select I/O backplane (1
maximum)and a minimum of 2 GB memory. Disk drive must be added for a
complete hardware solution.
OFS - Configure with two 1.6 GHz/12 MB single core 9110N processor modules
004
OFS - Configure with two 1.42 GHz/12 MB dual core 9120N processor modules
005
OFS - Configure with two 1.66 GHz/18 MB dual core 9140M processor modules
006
Server From Factor (Required - Must choose either Factory Rack Integration or Field
Rack Kit)
Please refer to the HP 10000 Series G2 Rack Best Practices Guide for information on
rack deployment, stabilization and transportation
(http://www.HP.com/go/rackandpower)
AD253A
Universal Rack Kit
B01
Field Rack Kit
Includes rails and cable management arm.
B01
Factory Rack Integration
For factory rack integration, a rack cabinet must appear in the same section of the
order. The slides and cable management arm will be installed with the server in the
rack cabinet when factory rack integration is ordered.
Pedestal Kit
AD251A
Racking Support Shelf Kit. Required for all factory racked orders. One shelf kit is
AB469A
needed for every 10 servers in the rack and one for every gap left between servers.
NOTE: If the N+1 power supply is ordered standalone the power supply will ship with two cords;; one
connects the system to the rack PDU and one enables connection to a wall socket. The cord that
connects the system power supply to the PDU has an IEC 13 end, which plugs into the system power
supply's IEC 14 socket, and an IEC 14 end, which plugs into the PDU's IEC 13 socket. The localized
cord that connects the system power supply directly to the wall socket has an IEC 13 end, which plugs
into the system power supply's IEC 14 socket, and a country specific end, which plus into the wall socket.
This localized cord is included at the distribution site.
If the N+1 power supply is ordered with the server, the additional cords will be included.
DA - 12698
Worldwide — Version 29 — February 1, 2011
Page 19
QuickSpecs
HP Integrity rx2660 Server
Technical Specifications
Supported Processors for
Field Upgrades
NOTE: Processor
frequencies cannot be
mixed within a system.
1.6 GHz Single core Intel Itanium Processor (AD392A)
Cache - On chip Level 1
32-KB
Cache - On-Chip Level 2
1-MB Instruction/256-KB Data
Cache - On-Chip Level 3
12-MB
Floating point Coprocessor included
Yes
1.4 GHz Dual core Intel Itanium Processor (AH240A)
Cache - On chip Level 1
32 KB
Cache - On-Chip Level 2
1 MB instruction/256 KB Data (per core)
Cache - On-Chip Level 3
12 MB (6 MB per core)
Floating point Coprocessor included
Yes
1.6 GHz Dual core Intel Itanium Processor (AH241A)
Cache - On chip Level 1
32 KB
Cache - On-Chip Level 2
1 MB instruction/256 KB Data (per core)
Cache - On-Chip Level 3
18 MB (9 MB per core)
Floating point Coprocessor included
Yes
System Memory
Minimum memory
Maximum memory capacity (8x 4GB DIMMs)
2 GB
32 GB
Internal Disks
Maximum disk mechanisms
Maximum disk capacity
8
2,400 GB
Standard Integrated I/O
Serial Attached SCSI (SAS)
10/100/1000Base-T (RJ 45 connector)
RS-232 serial port (general purpose)
RS-232 serial port (management processor)
10/100Base-T management port (RJ 45
connector)
VGA graphics
USB
8 ports
2 port
1
1
Included
1 front/1 rear
1 front/2 rear
I/O Buses and Slots (Must PCI-X 3 slot card cage (2×266 MHz/64 bit slots, and 1×133 MHz/64 bit slot)
AD246A*
select 1 only)
PCI-X/PCI Express combo card cage (2×Express slots with 4×333 MHz ropes, and
AD247A**
1×133 MHz/64 bit PCI-X)
*Not supported with Windows based systems.
**Required for Windows based systems. Optional for HP UX , Linux- and OpenVMS based systems.
DA - 12698
Worldwide — Version 29 — February 1, 2011
Page 20
QuickSpecs
HP Integrity rx2660 Server
Technical Specifications
Maximum I/O Cards
(See supported I/O table
for product specifics)
Mass Storage
LAN
WAN
Multi-Function (Mass Storage / LAN)
Additional Interface Cards
Electrical Characteristics
AC Input power
Hot swap Power supplies
Redundant AC power inputs
Maximum input power (for maximum processor,
memory, disk, DVD, I/O configurations)
Input Power at Idle (for maximum processor,
memory, disk, DVD, I/O configurations)
Maximum input current
Power factor at full load
100-240V 50/60 Hz
1 included, 2nd for N+1
1 included, 2nd for N+1
798W
2,724 BTU/hour
567W
1,936 BTU/hour
10A @ 100 Vms or 7A @ 200 Vms
0.98 (approximately)
Site Preparation
Site planning and installation included
NOTE: System is customer installable.
Rack depth (inches/mm)
Rack width (inches/mm)
Rack height (EIA/inches/mm)
Rack weight (kg/lbs) maximum
No
Environmental
Characteristics
3
3
3
3
3
26.8 in (680 mm)
19 in (482 mm)
2U/ 3.4 in (86 mm)
61.6 lbs. (28 kg)
Regulatory Model
RSVL 0503
7.0 Bels LwA
Acoustics (operator/bystander) at 77° F (25° C)
41° to 95° F (5° to 35° C)
Operating Temperature
(up to 5000 ft/1524 m)*
5° to 35° F (-40° to 70° C)
Non-operating Temperature
20° C/hour
Maximum rate of temperature change
15% to 80% RH non-condensing
Operating relative humidity
8% to 85% non-condensing
Non-operating relative humidity
10,000 ft (3,000 m) maximum
Operating altitude above sea level
15,000 ft (4,600 m) maximum
Non-operating altitude above sea level
* Maximum operating temperature range up to 5000 feet. For higher altitudes, de-rate the maximum
temperature by 2°C/1000 feet above 5000 feet.
DA - 12698
Worldwide — Version 29 — February 1, 2011
Page 21
QuickSpecs
HP Integrity rx2660 Server
Technical Specifications
Regulatory Compliance
Regulatory Model Number
Electromagnetic interference
Safety
More detailed regulatory documents and
certifications
RSVLA-0503
Complies with FCC Rules and Regulations, Part 15,
as a Class A digital device. Manufacturer's
Declaration to EN55022 Level A, VCCI Registered,
Class 1, Korea RLL, BMSI Taiwan
UL Listed, CSA Certified, TUV GS Mark
compliant with EN 60950 and EN 41003
http://docs.hp.com/en/hw.html
© Copyright 2011 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice.
Intel and Itanium are registered trademarks or trademarks of Intel Corporation in the U.S. and/or other countries.
The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and
services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial
errors or omissions contained herein.
DA - 12698
Worldwide — Version 29 — February 1, 2011
Page 22
Download PDF
Similar pages