Digital Power Amplifier Specifications

Digital Power Amplifier
Specifications
Power Output
Continuous Average Output Power
Four channels driven 20-20kHz @1% THD
Rated Distortion (1/2 power)
Rated Impedance
Damping Factor
Frequency Response (20-20kHz)
Physical Specifications
4 x 60W
0.02%
Switch Selectable 4 or 8 Ohms
50+
±1 dB
Unit Size Millimeters
Unit Size Inches
Shipping Size Millimeters
Shipping Size Inches
Unit Weight Kilograms
Unit Weight Pounds
Shipping Weight Kilograms
Shipping Weight Pounds
Power-On Modes
Audio
Power
Trigger
System
Trigger Input
Unit On Output
Source Inputs
Input Impedance
Input Sensitivity for rated power
Input Overload
Power Requirements
Power Supply
Power Consumption both channels at maximum
available output
Power Consumption average operating
conditions
Power Consumption no signal
Standby Power Consumption
44 H x 430 W x 250 D
1 3/4 H x 17 W x 9 7/8 D
205 H x 515 W x 343 D
8 H x 20 1/4 W x 13 1/2 D
3.0
6.6
4.8
10.5
NuVo reserves the right to change specifications without notice.
3-30 V AC or DC
+12VDC @100mA
22k ohm
.3-2V RMS
2.4V RMS
100-240VAC 50/60Hz
340W
50W
12W
0.35W
CE EMC
CE LVD
USA FCC
ETL
Canada Safety Listing (CAN/CSA E60065.00)
Australia C-Tick
15
Download PDF
Similar pages