A new product to serve your needs

Product Bulletin
PB00046HE
BAT450-F Industrial Wireless
LAN Access Points
The new family of industrial WLAN
access points offers a complete
solution to deploy a reliable,
customizable and versatile wireless
infrastructure while maximizing
cost effectiveness.
The BAT450-F family of WLAN
access points features a
ruggedized, compact design
for industrial needs and can
be customized to support a
variety of wireless and wired
connections. Combined with
the latest HiLCOS software, it
provides extensive redundancy
and security functions, as well
as IPv4/6 routing.
•Flexible deployment – With ruggedized
features to meet IP65/IP67 ratings, a
compact design and the ability to operate
under extreme temperatures, the BAT450-F
can be mounted anywhere.
•Customized connections – A wide range
of configurable network options, including
wireless, wired and cellular, ensure reliable
connections and high network availability.
•Powerful operating system – Hirschmann’s
operating system, HiLCOS, adds a rich set
of redundancy protocols and best-in-class
security features to the BAT450-F family.
The BAT450-F family is the answer to an
increasing need to fit powerful wireless access
points in industrial locations where space is a
premium and ease of installation is required.
Through these access points, network
managers can quickly set up a wireless
network infrastructure through the Automatic
Wireless Distribution System (AutoWDS).
With its modular design, the BAT450-F
can be customized for a variety of network
functions, country-specific approvals and
port interface types.
A new product to
serve your needs·
Applications
The BAT450-F access points are ideal for use
in transportation network environments,
specifically the railway industry. Dual-band
radios enable simultaneous voice and data
communications on board trains, and its
proven technology also offers wired and
wireless communication between rail cars,
known as coach-to-coach coupling.
For other industrial environments where the
network needs to communicate in harsh
conditions and with limited installation space,
the BAT450-F offers a compact and ruggedized
design that is also cost efficient. Its low weight
and small footprint could in future enable
industries – including power transmission and
distribution, process automation, and oil and
gas – to mount the device on walls and masts
or in confined spaces.
Your Benefits
The access points in the BAT450-F family are
compact and lightweight, yet able to withstand
extreme environments and temperatures.
This product family offers a complete solution
for industrial engineers looking to deploy a
reliable, customizable and versatile wireless
infrastructure.
BAT450-F Access Point Family
The access points in the new BAT450-F family provide a complete wireless solution offering
WLAN, Ethernet and Wireless Wide Area Network (WWAN) Interfaces. These wireless devices can
operate as an Access Client, Access Point or managed Access Point in combination with the BATControllers. The built-in Stateful Packet Inspection (SPI) firewall controls communication either
for bridged or routed traffic, enabling the creation of zones according to the guiding parameters
of a reliable Defense in Depth strategy.
The five core access point configurations include:
• BAT450-F: 1 x WLAN / 1 x ETH / 1 x serial interface (V.24)
• BAT450-F: 1 x WLAN / 2 x ETH / 1 x serial interface (V.24)
• BAT450-F: 2 x WLAN / 1 x ETH / 1 x serial interface (V.24)
• BAT450-F: 2 x WLAN / 2 x ETH / 1 x serial interface (V.24)
• BAT450-F: 1 x WLAN / 1 x ETH / 1 x LTE / 1 x serial interface (V.24)
The BAT450-F is designed to support Industrial IoT (IIoT) and wide area network (WAN)
functionality through its modular/extension interface.
The BAT450-F access
points are highly configurable with a range of
connection interfaces,
including wireless, wired
and cellular options.
Its WLAN radio module complies with the IEEE 802.11 a/b/g/n WLAN standard, enabling data
rates of up to 450 Mbit/s in both the 2.4 GHz and 5 GHz bands by using 3 x multiple-input and
multiple-output (MIMO) antenna technology.
Dedicated versions with country-specific approvals are available.
Benefits at a Glance
•Highly configurable design for maximum flexibility and cost effectiveness
•WLAN radio versions comply with the IEEE 802.11 a/b/g/n WLAN standard
– Also enable data rates up to 450 Mbit/s in both the 2.4 GHz and 5 GHz bands
via 3 x MIMO antenna technology
•Ethernet ports, including X coded M12 connector technology (IP67 version),
support 10/100/1000BASE-TX data rates
•Prepared to support in future WWAN and IIoT technologies
(ISA100.11a, Zigbee, Bluetooth, Wireless HART, etc.)
•Power input via 24 V DC and Power over Ethernet (PoE) (802.3af)
•Automatic point-to-point connections through AutoWDS function
•Operates at an extended temperature range (-40 °C to +70 °C)
•HiLCOS software with extensive management, redundancy and security functions,
as well as IPv4/6 routing
2
Technical Information
Product Description
Type
BAT450-F
Description
Dual Band Ruggedized Industrial Wireless LAN Access Point/Client with IEEE 802.11n for installation in harsh environment.
Port Type and Quantity
Up to 2 x WLAN interfaces, up to 2 x LAN ports 10/100/1000BASE-TX, Power over Ethernet according to IEEE 802.3af, 1 x V.24/ACA11
Radio Standard
IEEE 802.11a/b/g/h/n WLAN interface as per IEEE 802.11n, 3 x 3 MIMO up to 450 MBit/s gross bandwidth.
Radio Technology
Antenna Connector
For each WLAN module: 3 x N socket
Range
Depending on type of antenna, frequency range and data rate
Frequency Band
Supporting 2.4 GHz and 5 GHz: 2400 to 2483.5 MHz (ISM) and 5170 to 5850 MHz
Modulation
20M0F7D (DSSS/OFDM) @ 2.4 GHz, 20M0G7D (OFDM) @ 5 GHz, MCS 0 - MCS23
Radio Topology
WLAN access point, bridge, router, point-to-point, client, client-bridge mode, AutoWDS, fixed mesh with RSTP
Encryption
IEEE 802.11i/WPA2 with passphrase or 802.1x and hardware-accelerated AES, closed network, WEP64, WEP128, WEP152, user authentication,
802.1x/EAP, LEPS, WPA1/TKIP, fast roaming with Opportunistic Key Caching. Please refer to the HiLCOS data sheet for further information.
Interfaces
Ethernet
M12, X-coded, 10/100/1000 Mbit/s
V.24/ACA11
M12, A-coded, configuration interface or for automatic P2P connections verified over V.24 (train carriage coupling)
Power Requirements
Operating Voltage
1 x 24 V DC and 1 x Power over Ethernet according to IEEE 802.3af
Power Consumption
Up to 12.95 W, depending on number of radio modules
Ambient Conditions
Operation Temperature
-40 °C to +70 °C
Storage/Transport Temperature
-40 °C to +85 °C
Relative Humidity (non-condensing)
10 % to 95 %
Mechanical Construction
Dimensions (W x H x D)
261 x 189 x 55 mm
Mounting
Wall and mast
Protection Class
IP65/IP67
Approvals
Safety of Industrial Control Equipment
EN 60950
Radio
EN 300328, EN 301893, UL60950 (pending)
Environmental
EN 61000-6-2, EN 61131, E1 (pending) and EN 50155
NOTE: These are the prominent technical specifications. For complete technical specifications visit: www.hirschmann.com
3
BAT450-F Access Point Configurations
B A T 4 5 0 - F - E U
W W
9
A
W
9
K
9
A
T 6
V 4
T
C
9
A
Z
H
X X . X X . X X X X
Product
BAT450-F = IP65-/67-housing
Country-Certification
EU = Europe (CE)
Many other country certifications available.
Please refer to the online configurator at: www.hirschmann.com
Slot 1
W = WLAN module
Slot 2
W = WLAN modules
9 = Not installed
Slot 3
9 = Not installed
Client/AP
A =Access Point
C =Client
Voltage Range 1
W = 24 V DC and PoE
Voltage Range 2
9 = Not installed
Approvals 1
K = Train (EN 50155)
9 = No additional approval
Approvals 2
9 = No additional approval
Mounting
A =Standard
Interface 1
T6 = 10/100/1000 Mbit/s M12
Interface 2
V4 = V.24/ACA 11
T7 = 10/100/1000 Mbit/s M12+V.24/ACA 11
T6 = 10/100/1000 Mbit/s M12
99 = Not installed
Temperature Range
T = -40 °C to +70 °C
Software Option 1
A =VPN-5
C =VPN-100
B =VPN-50
9 =None
Software Option 2
9 =None
Software Option 3
D =Public Spot
A =AutoWDS
P =PRP
9 =None
Configuration
Z = Accessory package
9 = No Accessories
Type
H = Standard Hirschmann
Software Release
XX.XX.XXXX = Current Software Release
NOTE: The part number categories (OEM Type,
Configuration and Software Version) are optional.
Belden, Belden Sending All The Right Signals, GarrettCom, Hirschmann, Lumberg Automation, Tofino Security and the Belden logo are trademarks
or registered trademarks of Belden Inc. or its affiliated companies in the United States and other jurisdictions. Belden and other parties may also have
trademark rights in other terms used herein.
Phone +49 (0)7127/14-1809
4
©Copyright 2016, Belden Inc.
www.hirschmann.com
BAT450-F_PB00046_INIT_HIR_0116_E_EMEA
Download PDF
Similar pages