Sintering Activated Carbon Cartridge Filter

MS Activated Carbon Filter Cartridge
em
br
an
e
So
lu
tio
ns
—Sintering Activated Carbon Cartridge Filter
MS Activated Carbon Filter Cartridge
M
Sintering activated carbon cartridge filter simultaneously remove free chlorine and organic
chemicals that contribute to taste and odor while providing the particulate filtration and
dirt-holding capacity of a sediment filter. These filters are optimized for applications where they
perform the role of both a sediment and activated carbon filter.
The sintering process allows the production of a carbon block with more carbon and porosity,
but a lower pressure drop. This enables the filter to deliver extended life while removing sediment, chlorine, taste, odor and organic contaminants from water, aqueous solutions or suspensions. The sintering activated carbon filter is ideal, replacement GAC (Granular Activated
Carbon) and PAC (Powdered Activated Carbon) filter, for use in residential and commercial
water, food service, pre and post-RO systems.
> Material of construction
> Performance and Specification
Filter Media
Sintering activated carbon
Pore Size/μm
0.5 / 1.0 / 5.0 / 10
Inner Core
Polypropylene
Inner Diameter/mm
28
Netting
Polyethylene
Outer Diameter/mm
64
Connection Type
DOE
Length/inch
10 / 20
O-Ring/Gasket
NBR/EPDM/Silicon
Applicable PH Value
1~14
Working temperature & Differential Pressure
80℃ @ 4.2bar
> Features
- Eliminates release of carbon fines
- Lowest extractable, pure materials of construction
- Maximum service life and resistance to fouling
- No channeling or bypassing of liquid
- High dirty holding capacity
> Application
- Drinking water and RO pre-filtration
- Food service
- Chlorine, Volatile Organic Compounds
- Residential and Commercial water
> Model and Order information
MS—Sintering activated carbon cartridge filter model number:
Example: CRSI010050N
CR
Cartridge
SI
010
050
N
Filter Media
Cartridge Length
Micron Rating
O-Ring/Gasket
Sintering activated carbon
010 = 10 inch
005 = 0.5μm
N = NBR
020 = 20 inch
010 = 1.0μm
E = EPDM
050 = 5.0μm
S = Silicon
Filter
100 = 10.0μm
Membrane Solutions.
Address: 1108 Spring View Lane Plano, TX 75075
Toll Free: 866-528-4572 Fax: 732-412-4040
www.membrane-solutions.com
Download PDF
Similar pages