BP-70I - ABC Elektrik

IZUMI PRODUCTS COMPANY
MODEL No.
BP-70I
Compatible with all 14.4V E-Robo series tools
1.3Ah Capacity
SPECIFICATIONS
Output voltage : 14.4 VDC
Capacity : 1.3Ah
Type : Nickel Cadmium
Charge time :
15 min with CH-35R or CH-35EMC
LED indicator : Capacity,
recharge cycles
SIZE
100 (L) x 137 (H) x 75 (W) mm
WEIGHT
750 g
BP-70I Intelligent battery
FEATURES
REMARKS
"Smart" Replacement Battery
* The battery has a limited life. When
capacity becomes about 1 / 2 of the
original capacity, the battery should be
replaced.
The BP-70I intelligent battery is the same
as the BP-70R with the addition of LED
display. The LED on the side of the
battery allows the user to monitor the
status of the battery's total life and
power in between charges.
It also allows visual evaluation of battery
power while in use.
BP-70I with CH-70DC 1H Charger
When not used with the tool, just press
the check button to get an instant
read-out of charge remaining.
* If the battery is stored without being
charged, natural drainage will cause the
power to be reduced. Be sure to charge
the battery every 3 months.
* The battery will need to be fully charged
before first time use.
* Remaining battery capacity level To
check remaining battery capacity level,
press the check button. The remaining
battery capacity level is displayed for
about 5 seconds.
Recharge the battery when the bottom
light starts to blink.
* Charging level
While the battery is charged, the
indicator lights up as the capacity level
increases.
* Number of charges
Keep pressing the check button for 10
seconds to show number of charges
performed. LED pattern shows number in
binary system.
27 BATTERY
IZUMI PRODUCTS COMPANY
MODEL No.
BP-70E
Compatible with all 14.4V E-Robo series tools
1.9 Ah Capacity
SPECIFICATIONS
Output voltage : 14.4 VDC
Capacity : 1.9 Ah
Type : Nickel Cadmium
Charge time :
25 min with CH-35R or CH-35EMC
SIZE
100 (L) x 137 (H) x 70 (W) mm
WEIGHT
800 g
BP-70E High Capacity Battery
FEATURES
REMARKS
Standard Replacement Battery
* The battery has a limited life. When
capacity becomes about 1/2 of the
original capacity, the battery should
be replaced.
The BP-70E is a standard replacement
battery with high capacity of 1,900
mAh. Comparing with our BP-70R, it has
46% more of capacity. It means 46%
more of crimp cycles and cutting cycles
per charge.
The battery's life expectancy is approximately
600 recharges.
BP-70E (Orange latch for 1.9Ah)
* If the battery is stored without being
charged, natural drainage will cause
the power to be reduced. Be sure to
charge the battery every 3 months.
* When the battery is used for the first
time, the battery will need to be fully
charged before use.
* Cycles per charge will vary depending
on the type and size of the material
being cut or compressed.
BATTERY 28
IZUMI PRODUCTS COMPANY
MODEL No.
BP-70EI
Compatible with all 14.4V E-Robo series tools
1.9 Ah Capacity
SPECIFICATIONS
Output voltage : 14.4VDC
Capacity : 1.9Ah
Type : Nickel Cadmium
Charge time :
25 min with CH-35R or CH-35EMC
LED indicator : Capacity,
recharge cycles
SIZE
100 (L) x 137 (H) x 75 (W) mm
WEIGHT
820 g
BP-70EI High Capacity Intelligent Battery
FEATURES
REMARKS
The BP-70EI intelligent battery is the
same as the BP-70E with the addition of
LED display. The LED on the side of the
battery allows the user to monitor the
status of battery's total life and power in
between charges.
* The battery has a limited life, When
capacity becomes about 1/2 of the original
capacity, the battery should be replaced.
Comparing with our BP-70R, it has 46%
more of capacity. It means 46% more of
crimp cycles and Cutting cycles per
charge.
* When the battery is used for the first time,
the battery will need to be fully charged
before use.
BP-70EI (Orange latch for 1.9Ah)
It also allows visual evaluation of battery
power while in use or without use. When
not used with the tool, just press the
check button to get an instant read-out
of charge remaining.
* If the battery is stored without being
charged, natural drainage will cause
the power to be reduced. Be sure to
charge the battery every 3 months.
* Remaining battery capacity level To
check remaining battery capacity level,
press the check button. The remaining
battery capacity level is displayed for
about 5 seconds.
Recharge the battery when the bottom
light starts to blink.
* Charging level
While the battery is charged, the
indicator lights up as the capacity level
increases.
* Number of charges
Keep pressing the check button for
10 seconds to show number of
charges performed. LED pattern
shows number in binary system.
29 BATTERY
IZUMI PRODUCTS COMPANY
MODEL No.
BP-70MH
Compatible with all 14.4 V E-Robo series tools
3.0Ah Capacity (Nickel-metal hydride battery)
SPECIFICATIONS
Output voltage : 14.4 VDC
Capacity : 3.0 Ah
Type :
Nickel-metal hydride battery
Charge time : 40 min with CH-35R
or CH-35EMC
SIZE
100(L) x 140(H) x 70(W) mm
WEIGHT
850g
BP-70MH High Capacity Battery
BP-70MH shown with CH-35R
(light blue Top Cover For 3.0 Ah)
FEATURES
REMARKS
High Capacity Nickel metal hydride
battery.
* The battery has a limited life. When
capacity becomes about 1/2 of the
original capacity, the battery should
be replaced.
The BP-70MH is a standard replacement
battery with high capacity of 3,000
mAh.
Comparing with our BP-70R, it has 230%
more of capacity. It means 230% more
of crimp cycles and cutting cycles per
charge.
The battery's life expectancy is
approximately 600 recharges.
* If the battery is stored without being
charged, natural drainage will cause
the power to be reduced. Be sure to
charge the battery every 3 months.
* The battery will need to be fully
charged before first time use.
* Cycles per charge will vary
depending on the type and size of
the material being cut or
compressed.
BATTERY 30
IZUMI PRODUCTS COMPANY
MODEL No.
Regular battery charger
CH-3FC2
SPECIFICATIONS
Input voltage : CH-3TC (120V),
CH-3FC2 (220V / 240V switchable)
Capacity : 50VA
Charge time :
1 hour for BP-70R or BP-70I,
90 minutes for BP-70E or BP-70EI,
3 hours for BP-250R1
SIZE
212 (L) x 95 (H) x 105 (W) mm
WEIGHT
1.9 kg
CH-3FC2 1 hour Charger
FEATURES
REMARKS
Standard One Hour Battery Charger
* The LED indicator lights up and stays
while charging.
The CH-3FC2 is one hour charger for the
BP-70R and BP-70I.
For the BP-70E and BP-70EI, charge time
is 90 minutes.
CH-3FC2 shown with BP-70R
31 CHARGER
* The indicator will go out when
completed.
* It charges the BP-70R, BP-70I,
BP-70E, BP-70EI only.
Do not use the charger for any
other devices.
IZUMI PRODUCTS COMPANY
MODEL No.
40 minutes quick charger for BP-70MH
CH-35R or
CH-35EMC
SPECIFICATIONS
Input voltage :
CH-35R(120V)
CH-35EMC(230V)
Capacity :
CH-35R (220VA)
CH-35EMC (230VA)
SIZE
200(L) x 95(H) x 115(W )mm
WEIGHT
900g
CH-35R 40 minutes Charger with BP-70MH
FEATURES
REMARKS
40 Minutes Charger for High capacity
battery, BP-70MH.
Stand by - RED Blinking
Under charging - GREEN Lighting
Completion - ORANGE Lighting
High or Low temperature - RED
Lighting
Refresh charging - GREEN Blinking
Life end of battery - RED fast Blinking
Charger out of order- NO Lighting
It also charges BP-70E and BP-70EI in 25
minutes.
CH-35R is UL and CSA listed.
CH-35EMC is an EMC approved charger
in accordance with related CE and
EMC directives.
CH-35EMC shown with BP-70MH
* It charges BP-70R, BP-70I, BP-70E,
BP-70EI, BP-70MH only.
* Charge time
15 min for BP-70R or BP-70I
25 min for BP-70E or BP-70EI
40 min for BP-70MH
* Refresh Charge time
6 hours for BP-70R or BP-70I
8 hours for BP-70E or BP-70EI
10 hours for BP-70MH
* Do not use charger for any other
devices.
CHARGER 32
IZUMI PRODUCTS COMPANY
MODEL No.
DC charger for E-Robo series batteries
CH-70DCH
SPECIFICATIONS
Input voltage : 12VDC or 24 VDC
Rated input : 39 Watts
SIZE
200 (L) x 95 (H) x 115 (W) mm
WEIGHT
640 g
CH-70DCH DC Charger with BP-70MH
FEATURES
REMARKS
CH-70DCH is a 12/24V DC charger
* LED indicator lights up and
stays on while charging
Can be plugged directly into an
automotive cigarette lighter socket and
has a built in overload fuse protector
Engine should be running while charging
the battery
CH-70DCH shown with BP-70MH
* Indicator will go out when
completed
* Charges batteries BP-70R, BP-70I,
BP-70E,BP70EI,BP-70MH.
Do not use the charger for any other
devices
* Charge time
BP-70R, BP-70I : 45 minutes
BP-70E, BP-70EI : 70 minutes
BP-70MH
: 100 minutes
* Quality backed by ISO 9001
33 CHARGER
Download PDF
Similar pages