FREEZER HVUN 6172WH HVUN 6172XH 4 SCRAPPING OLD APPLIANCES 7 ENERGY SAVING 7 Installing your new appliance Reversing the door Description of the appliance 9 1 Display controls 12 Using your appliance 13 Helpful and hints and tips 14 Cleaning and care 14 Troubleshooting 15 Disposal of the appliance 17 Thank you for purchasing this product. Before using your refrigerator, please carefully read this instruction manual in order to maximize its performance. Store all documentation for subsequent use or for other owners. This product is intended solely for household use or similar applications such as: - the kitchen area for personnel in shops, offices and other working environments - on farms, by clientele of hotels, motels and other environments of a residential type - at bed and breakfasts (B & B) - for catering services and similar applications not for retail sale. This appliance must be used only for purposes of storage of food, any other use is considered dangerous and the manufacturer will not be responsible for any omissions. Also, it is recommended that you take note of the warranty conditions. SAFETY INFORMATION The refrigerator contains a refrigerant gas (R600a: isobutane) and insulating gas (cyclopentane), with high compatibility with the environment, that are, however, infl ammable. We recommend that you follow the following regulations so as to avoid situations dangerous to you: Before performing any operation, unplug the power cord from the power socket. • The refrigeration system positioned behind and inside the Wine Coolers contains refrigerant. Therefore, avoid damaging the tubes. • If in the refrigeration system a leak is noted, do not touch the wall outlet and do not use open flames. Open the window and let air into the room. Then call a service centre to ask for repair. • Do not scrape with a knife or sharp object to remove frost or ice that occurs. With these, the refrigerant circuit can be damaged, the spill from which can cause a fire or damage your eyes. • Do not install the appliance in humid, oily or dusty places, nor expose it to direct sunlight and to water. • • • • • • • • • • • Do not install the appliance near heaters or inflammable materials. Do not use extension cords or adapters. Do not excessively pull or fold the power cord or touch the plug with wet hands. Do not damage the plug and/or the power cord; this could cause electrical shocks or fires. It is recommended to keep the plug clean, any excessive dust residues on the plug can be the cause fire. Do not use mechanical devices or other equipment to hasten the defrosting process. Absolutely avoid the use of open flame or electrical equipment, such as heaters, steam cleaners, candles, oil lamps and the like in order to speed up the defrosting phase. Do not use or store inflammable sprays, such as spray paint, near the Wine Coolers. It could cause an explosion or fi re. Do not use electrical appliances inside the food storage compartments, unless they are of the type recommended by the manufacturer. Do not place or store inflammable and highly volatile materials such as ether, petrol, LPG, propane gas, aerosol spray cans, adhesives, pure alcohol, etc. These materials may cause an explosion. Do not store medicine or research materials in the Wine Coolers. When the material that requires a strict control of storage temperatures is to be • • • • • stored, it is possible that it will deteriorate or an uncontrolled reaction may occur that can cause risks. Maintain the ventilation openings in the appliance enclosure or in the built-in structure, free of obstruction. Do not place objects and/or containers filled with water on the top of the appliance. Do not perform repairs on this Wine Coolers. All interventions must be performed solely by qualified personnel. This appliance can be used by children aged from 8 years and above and by persons with reduced physical, sensory or mental capabilities or with a lack of experience and knowledge; provided that they have been given adequate supervision or instruction concerning how to use the appliance in a safe way and understand the hazards involved. Children should not play with the appliance. Cleaning and user maintenance should not be made by children without supervision SCRAPPING OLD APPLIANCES This appliance is marked according to the European directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE). WEEE contains both polluting substances (which can cause negative consequences for the environment) and basic components (which can be re-used). It is important to have WEEE subjected to specific treatments, in order to remove and dispose properly all pollutants, and recover and recycle all materials. Individuals can play an important role in ensuring that WEEE does not become an environmental issue; it is essential to follow some basic rules: - WEEE should not be treated as household waste; - WEEE should be handed over to the relevant collection points managed by the municipality or by registered companies. In many countries, for large WEEE, home collection could be present. In many countries, when you buy a new appliance, the old one may be returned to the retailer who has to collect it free of charge on a one-to-one basis, as long as the equipment is of equivalent type and has the same functions as the supplied equipment. Conformity By placing the mark on this product, we are confirming compliance to all relevant European safety, health and environmental requirements which are applicable in legislation for this product. Energy Saving For better energy saving we suggest : Installing tge appliance away from heat sources and not exposed to direct sunlight and in a well ventilated roo. Avoid putting hot food into the refrigerator to avoid increasing the internal temperature and therefore causing continuos functionaliting of the compressor. Do not excessively stuff foods so as to ensure proper air circulation. Defrost the appliance in case there is ice to facilitate the transfer of cold. In case of absence of electrical energy, it is advisable to keep the refrigerator door closed. Open or keep the doors of the appliance open as little as possible Avoid adjusting the setting to temperatures too cold. Remeve dust present on the rear of the appliance 7 Installing your new appliance Leveling of appliance ● For sufficient leveling and air circulating in the lower rear section of the appliance, the bottom feet may need to be adjusted. You can adjust them manually by hand or by using a suitable spanner. ●To allow the door to self-close, tilt the top backwards by about 10mm. Before using the appliance for the first time, you should be informed of the following tips. Ventilation of appliance In order to improve efficiency of the cooling system and save energy, it is necessary to maintain good ventilation around the appliance for the dissipation of heat. For this reason, sufficient clear space should be available around the refrigerator. Suggest :It is advisable for there to be at least 75mm of space from the back to the wall, at least 100mm from its top,at last 100mm from its side to the wall and a clear space in front to allow the doors to open 135°. As shown in following figures. ≤10mm Installing the door handle For the convenience of transportation, the door handles are separately provided in a plastic bag, you can install the door handles as follows. 1. Lever the screw hole covers on the side which you want to install the handle of the door, and then put them back to the plastic bag. 2. Take the handle match on the right side of the door as the example, keeping axes of screw holes in the handle and the door in a line, as the picture shows. Note: ● This appliance performs well within the climate class from SN to T showed in the table below. It may not work properly if being left at a temperature above or below the indicated range for a long period. Extended Temperate SN Ambient Temperature range(°C) +10 to +32 Temperate N +16 to +32 Subtropical ST +16 to +38 T +16 to +43 Class Tropical Symbol freezer door handle part screw handle cover screw hole cove ●Stand your appliance in a dry place to avoid high moisture. ● Keep the appliance out of direct sunlight， rain or frost. Stand the appliance away from heat sources such as stoves, fires or heaters. 3. Fix the handle with the screws provided in the plastic bag. And then install the handle covers as the above figure shows. 8 2. Remove part ① and part ② from the refrigerator body, and then take down part ③ on the door in the same way. Remove the part screws ④ ,then take off part ⑤ as the picture below. The side at which the door opens can be changed, from the left side (as supplied) to the right side, if the installation site requires. Warning! When reversing the door, the appliance must not be connected to the mains. Ensure that the plug is removed from the mains socket. Tools you will need: 8mm socket wrench ① ② ③ Cross-shaped screwdriver ④ Thin-blade screwdriver ⑤ 8mm wrench Note: Before you start lay the refrigerator on its back in order to gain access to the base, you should rest it on soft foam packaging or similar material to avoid damaging the backboard of the refrigerator. To reverse the door, the following steps are generally recommended. 1. Stand the refrigerator upright. ① Upper hinge cover ② Top cover block ③ Cover plate ④ Special flange selftapping screw ⑤ Upper hinge part Note: Please hold the freezer door by hand during step 2 to prevent door dropping. 3. Take off the door ① and place it on smooth surface with panel upwards. Screw out the hinge axis ② (include washer) as show figure Ⅱ and Ⅲ ， and then turn the upper hinge fixed board ③ over as show figure Ⅳ . Finally fix part ②on part ③ as show figure Ⅴ and Ⅵ,then place it at side for use. Ⅰ Ⅱ ① Ⅳ Ⅲ Ⅴ 9 ② ③ Ⅵ 4.Lever handle covers ① and loose screws ② , remove the handle ③ as show figure Ⅰ ,then place it at side for use. Take the screw hole covers ④ down as show figure Ⅱ , and install them in the right side as show figure Ⅲ . Change handle to left, install it as show figure Ⅳ . Detach door stopper ⑤ and limit block ⑥ and then install door stopper and limit block to right as show figure Ⅴ and Ⅵ. Ⅰ ③②① Ⅱ Ⅲ Ⅳ Ⅴ Ⅵ ⑤ ⑥ ④ ⑦ 7.Just remount to the step 5,change part① to right and part② to left and then fix them with screws④ . Finally install part③. 8. Take off the part ①, place it at side for use as show figure Ⅰ . Move the freezer door to appropriate position, adjust part ② and door, then fix part ② by screws as show figure Ⅱ . (Please hold upper door by hand when installing). Fix the part ③ as show figure Ⅱ (which is in the plastic bag) . Reverse part ① by 180°and install it onto the left corner of the door as show figure Ⅲ . Finally mount part ④ as show figure Ⅳ.( which was taken down in step 2) Ⅰ ① ③ ⑤ ⑦ Handle covers ② Screws Handle ④ Screw hole covers Door stopper ⑥ Limit block Self-tapping screws 5. Place refrigerator flatwise, remove part③ and then loose screws④ . Remove part ② and part① as the picture. Ⅱ ① Ⅳ Ⅲ ② ③ ④ ① ② ③ ④ ① Left Lower hinge part ② Front foot fixed board ③ Adjustable bottom feet part ④ special flange self-tapping screw 6. Screw out lower hinge axis, change it to the near hole site as the picture below, and then screw up and mount washer as the picture below. 9.Finally install part ① and part ② (both of which are taken down in step 2) in the refrigerator body as the picture below. ① washer hinge axis Note: washer may stick to the door. 10 ② Description of the appliance View of the a ppliance 1. Upper cover of door 2. Corner cover 3. Flap cover 4. Handle(back) 5. Ice tray(inside) 6. Upper freezer drawer 7. Middle freezer drawer(huge box) 8. Freezer door 9. Lower freezer drawer 10. Freezer door seal 11. Adjustable bottom feet 12. Hinge cover 13. Block cover 14. Functional board part 15. Glass shelf 16. Shelf part(inside) 17. Cabinet Note: Due to constant improvement of our products, your refrigerator may be slightly different from this instruction manual, but its functions and using methods remain the same. To get more space in the freezer, you can remove drawer(except lower freezer drawer), installation bracket and integrative ice maker/twistable ice tray. Note: To get the best energy efficiency of this product, please place all shelves, drawers and baskets on their original position as the illustration above. 11 Disp lay controls All functions and controls of the unit are accessible from a control panel conveniently located on the roof refrigerator body. A display circuit board allows easy configuration of features and settings in a simple and intuitive manner. Important! When the refrigerator is energized, all the pilot lights will turn on for 3 sec and you will also heard a long sound of “beep”. The display board consists of four buttons and eight pilot lights. You will heard a short sound of “beep” when you press the button. Caution! When you set a temperature, you set an average temperature for the whole refrigerator cabinet. Temperature inside the compartment may vary from the temperature values displayed on the panel, depending on how much food you store and where you place them. Ambient temperature may also affect the actual temperature inside the appliance. 1. Temp Press “Temp” button to set freezer temperature between 14℃ and -24℃ as needed, and the light of the comparable temperature will be lighten corresponding values according to the following sequence. -14℃ -16℃ -18℃ -24℃ -22℃ -20℃ 2. Super Super will quickly lower the temperature within the freezer so food will freeze faster. This feature also helps to keep the vitamins and nutrition of fresh food for longer period. ● Press “Super” button to activate the super freeze function. The light will come on and the freezer temperature setting displays -24℃. ● Super freeze automatically switches off after 26 hours and the freezer temperature will revert back to the previous setting. ● When super freeze function is on, you can switch off super freeze function by pressing “Super” or “Temp” button, then the freezer temperature setting or function mode will revert back to the previous setting. Controlling the temperature We recommend that when you start your refrigerator for the first time, the temperature for the refrigerator is set to -18°C. If you want to change the temperature, follow the instructions below. 12 3. Alarm users of potential damage to stored food. If a power failure occurs, for example a blackout in your area of residence while you are away, the temperature alarm may be activated when power is restored to be the unit. 4. Power If you want to stop using it, you can turn the appliance off by pressing “Power” button. In case of alarm, “Alarm” icon will light up and a buzzing sound will start. Press “Alarm” button to stop alarm and buzzing then “Alarm” icon will turn off. Caution! When the refrigerator is turned on after a period of inactivity, the Alarm may be activated. In this case, press “Alarm” button to cancel it. Door Alarm The alarm light on and a buzzing sound indicate abnormal conditions, such as accidentally a door left open. ● Leaving the door of refrigerator open for over 2 minutes will activate a door alarm and buzzer. The buzzer will beep 3 times per minute for 10 minutes. Closing the door cancels the door alarm and buzzer. ● To save energy, please avoid keeping the door open for a long time when using refrigerator. The door alarm can also be cleared by closing the door. Temperature alarm This is an important feature that alerts ● When the refrigerator is working, you can switch the appliance off by pressing “Power” button for above 5 seconds, meanwhile the display panel will be turned off. Important! Do not store any food in the fridge during this time. If you will not use the refrigerator for a long time, please pull the plug. ● When the appliance is power off, you can switch the appliance on by pressing “Power” button for 1 second, and the refrigerator returns to the previous temperature setting. Using your appliance This section explains that how to use the refrigerator features. We recommend that you read through carefully before using the appliance. Flap cover Freezer Drawer ● You can turn the flap cover upwards ● It is used to store food which when you want to take out the food in needs to be frozen, including meat, the top chamber. fish, ice cream, etc. ● Before you open or close the flap cover, you must lift it to the guide track first. Then, the flap cover can slide along the guide track to the top or the bottom. 13 Helpful hints and tips Energy saving tips We recommend that you follow the tips below to save energy. ● Try to avoid keeping the door open for long periods in order to conserve energy. ● Ensure the appliance is away from any sources of heat. (Direct sunlight, electric oven or cooker etc.) ● Don't set the temperature colder than necessary. ● Don't store warm food or evaporating liquid in the appliance. ● Place the appliance in a well ventilated, humidity free, room. Please refer to Installing your new appliance chapter. ● If the diagram shows the correct combination for the drawers, crisper and shelves, do not adjust the combination as this is designed to be the most energy efficient configuration. Hints for fresh food refrigeration Do not place hot food directly into t h e r e f r i g e r a t o r, t h e i n t e r n a l temperature will increase resulting in the compressor having to work harder and will consume more energy. ● Do cover or wrap the food， particularly if it has a strong flavor. ● Place food properly so that air can circulate freely around it. ● Hints for freezing When first starting-up or after a period out of use, let the appliance run at least 2 hours on the higher settings before putting food in the compartment. ● ● Prepare food in small portions to enable it to be rapidly and completely frozen and to make it possible to subsequently thaw only the quantity required. ● Wrap up the food in aluminum foil or polyethylene food wraps which are airtight. ● Do not allow fresh, unfrozen food to touch the food which is already frozen to avoid temperature rise of the latter. ● Iced products, if consumed immediately after removal from the freezer compartment, will probably cause frost burns to the skin. ● It is recommended to label and date each frozen package in order to keep track of the storage time. Hints for the storage of frozen food Ensure that frozen food has been stored correctly by the food retailer. ● Once defrosted，food will deteriorate rapidly and should not be re-frozen. Do not exceed the storage period indicated by the food manufacturer. ● Switching off your appliance If the appliance needs to be switched off for an extended period, the following steps should be taken prevent mould on the appliance. 1. Remove all food. 2. Remove the power plug from the mains socket. 3. Clean and dry the interior thoroughly. 4. Ensure that all the doors are wedged open slightly to allow air to circulate. Cleaning and care For hygienic reasons the appliance (including exterior and interior accessories) should be cleaned regularly at least every two months. Caution! The appliance must not be connected to the mains during cleaning. Danger of electrical shock! Before cleaning switch the appliance off and remove the plug from the mains socket. 14 Exterior cleaning Although this appliance automatically defrosts, a layer of frost may occur on the freezer compartment's interior walls if the freezer door is opened frequently or kept open too long. If the frost is too thick, choose a time when the supply of food stocks are low and proceed as follows: 1.Remove existing food and accessories baskets, unplug the appliance from the mains power and appliance from the mains power and leave the doors open. Ventilate the room thoroughly to accelerate the thawing process. 2. When defrosting is completed, clean your freezer as described above. Caution! Don't use sharp objects to remove frost from the freezer compartment. Only after the interior is completely dry should the appliance be switched back on and plugged back into the mains socket. To maintain good appearance of your appliance, you should clean it regularly. -Wipe the digital panel and display panel with a clean, soft cloth. -Spray water onto the cleaning cloth instead of spraying directly on the surface of the appliance. This helps ensure an even distribution of moisture to the surface. -Clean the doors, handles and cabinet surfaces with a mild detergent and then wiped dry with a soft cloth. Caution! -Don't use sharp objects as they are likely to scratch the surface. -Don't use Thinner, Car detergent, Clorox, ethereal oil, abrasive cleansers or organic solvent such as Benzene for cleaning. They may damage the surface of the appliance and may cause fire. Interior cleaning You should clean the appliance interior regularly. It will be easier to clean when food stocks are low. Wipe the inside of the fridge freezer with a weak solution of bicarbonate of soda, and then rinse with warm water using a wrung-out sponge or cloth. Wipe completely dry before replacing the shelves and baskets. Thoroughly dry all surfaces and removable parts. Door seal cleaning Take care to keep door seals clean. Sticky food and drinks can cause seals to stick to the cabinet and tear when you open the door. Wash seal with a mild detergent and warm water. Rinse and dry it thoroughly after cleaning. Caution! Only after the door seals are completely dry should the appliance be powered on. Troubleshooting If you experience a problem with your appliance or are concerned that the appliance is not functioning correctly, you can carry out some easy checks before calling for service, please see below. You can carry out some easy checks according to this section before calling for service. Warning! Don't try to repair the appliance yourself. If the problem persists after you have made the checks mentioned below, contact a qualified electrician, authorized service engineer or the shop where you purchased the product. 15 Problem Possible cause & Solution Check whether the power cord is plugged into the power outlet properly. Check whether the “Power” funtion is on by pressing the “power” button for 1 second. Appliance is not Check the fuse or circuit of your power supply, replace if necessary. working correctly The ambient temperature is too low. Try setting the chamber temperature to a colder level to solve this problem. It is normal that the refrigerator is not operating during the automatic defrost cycle, or for a short time after the appliance is switched on to protect the compressor. Odours from compartments the The interior may need to be cleaned. Some food, containers or wrapping cause odours. The sounds below are quite normal: Compressor running noises. ● Air movement noise from the small fan motor in the fridge compartment or other compartments. ● Gurgling sound similar to water boiling. ● Popping noise during automatic defrosting. the ● Clicking noise before the compressor starts. ● Noise from appliance Other unusual noises are due to the reasons below and may need you to check and take action: ● The cabinet is not level. ● The back of appliance touches the wall. ● Bottles or containers fallen or rolling. The motor continuously It is normal to frequently hear the sound of the motor, it will need to run more when in following circumstances: ● Temperature setting is set colder than necessary ● Large quantity of warm food has recently been stored runs within the appliance. ● The temperature outside the appliance is too high. ● Doors are kept open too long or too often. ● After your installing the appliance or it has been switched off for a long time. A layer of occurs in compartment frost Check that the air outlets are not blocked by food and the ensure food is placed within the appliance to allow sufficient ventilation. Ensure that door is fully closed. To remove the frost, please refer to cleaning and care chapter. You may have left the doors open too long or too frequently; Temperature inside or the doors are kept open by some obstacle; or the is too warm appliance is located with insufficient clearance at the sides, back and top. 16 Temperature inside Increase the temperature by following the “Display controls” chapter. is too cold Doors can't closed easily be Check whether the top of the refrigerator is tilted back by 10-15mm to allow the doors to self close, or if something inside is preventing the doors from closing. The water pan (located at the rear bottom of the cabinet) may not be properly leveled, or the draining Water drips on the spout （ located underneath the top of the compressor depot） may not be properly positioned to direct water floor into this pan, or the water spout is blocked. You may need to pull the refrigerator away from the wall to check the pan and spout. Disposal of the appliance It is prohibited to dispose of this appliance as household waste. Packaging materials Packaging materials with the recycle symbol are recyclable. Dispose of the packaging into a suitable waste collection container to recycle it. Before disposal of the appliance 1. Pull out the mains plug from the mains socket. 2. Cut off the power cord and discard with the mains plug. Warning! Refrigerators contain refrigerant and gases in the insulation. Refrigerant and gases must be disposed of professionally as they may cause eye injuries or ignition. Ensure that tubing of the refrigerant circuit is not damage prior to proper disposal. Correct Disposal of this product This symbol on the product or in its packing indicates that this product may not be treated as household waste. Instead, it should be taken to the appropriate waste collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by the inappropriate waste handling of this product. For more detailed information about the recycling of this product, please contact your local council your household waste disposal service, or the shop where you purchased the product. 17 COMPANY ADDRESS - CANDY HOOVER GROUP SRL Via Privata Eden Fumagalli, 20047 Brugherio (MB), Italy.