DRIVER SPECIFICATION SHEETS
acdc1900/B/700/1-10/Solo/IP20
Output current of 700mA
Technical Specification
Analogue dimming control - linear dimming from
conventional 1-10V dimmer
Mains input voltage
220 to 240V ac rms
Mains frequency
47 to 63Hz
Power factor at full load
Regulated output current - LED series string is
supplied with electronically regulated constant
current
>0.95 (0.98 typical)
Efficiency at full load
86% typical
Mains surge protection
Active power factor correction - reduces mains
current and lowers electricity cost
4kV common-mode 2kV differential
Input-output isolation
3.75kV ac rms
Ambient temperature range
-25°C to 50°C
Maximum Tc temperature
Self protected - open and short-circuit protected,
self-resetting over temperature trip
Humidity
Hot plug - also benefits from output hot plug
protection
Output current (undimmed)
High efficiency design ensures cool operation and
long life.
Max output power
80°C
95% max non-condensing
Thermal trip
110°C - internal self-resetting
700mA
Dimming range (output
current)
5%-100%
33W
LED string voltage (At
maximum LED current)
10.8V to 48V at full current.
8V minimum (fully dimmed)
Enclosure
Ambient temperature rating of -25°C to 50°C
acdc LED range – 4 to 13 LEDs
White polycarbonate UL94-V0 rated
Dimensions IP20
180 x 32 x 32 mm
Airspace volume
500cm3
Terminal blocks
Rising clamp 10mm input 5mm output
Max recommended wire size
0.5mm2 to 1.5mm2
Weight
125g
EN61347-2-13 EN61000-3-2 EN61000-3-3
EN62384 EN60929 EN61547 EN55015
Compliance
Dimensions
Dimensions
Wiring Diagram
Remote ‘C’ Style
LEDs
Live
Neutral
Live
Neutral
LED Output
1V-10V Dimmer
1-10 Control
LEDs
Live
1-10 Control
32
Neutral
LED Output
LEDs
Live
169
180
32
Neutral
1-10 Control
IMPORTANT
Disconnect the mains supply for at least one minute before connecting or
Distance
in Metres
Secondary
disconnecting
the LED string.
Cable
Cross section
area per
conductor
A DR7005 Jun 2015
LED Output
<35m
0.5mm
2
<50m
<75m
1mm
1.5mm
2
<90m
2
<100m
2.5mm
2
4mm2
30
Download PDF
Similar pages