正面 成品尺寸:210*297MM 反面

USER’S MANUAL
tests the units electronics, battery and horn to ensure proper operation.
This feature helps emergency responders, investigators, or service
Smoke alarms
The unit shall include a piezoelectric horn that is rated at 85 decibels at 10
technicians identify which units in your home were exposed to alarm levels
DC Powered Photoelectric Smoke Alarm with 9V Battery Back-up,
feet. In a smoke incident, the horn will sound in the repetitive
of smoke after the condition has subsided. The Latching Alarm Indicator
connecting Features .
manner—three beeps , a pause, three beeps , a pause .
stays ON until you reset it by pressing the Test/Silence button. The
INTRODUCTION
The unit shall also include a low battery warning utilizing a brief alarm chirp
Latching Alarm Indicator is also reset when DC power is removed from the
Thank you for choosing our products for your Smoke Alarm needs. You
every 30-40 seconds for a minimum of seven days.
Alarm.
have purchased a state-of-the-art Smoke Alarm designed to provide you
The alarm will utilize a red LED that shall flash once every 30-40 seconds
RECOMMENDED LOCATIONS FOR SMOKE ALARMS
with early warming of a fire.
to indicate the alarm is receiving power.
Key features include:
Technical specifications:
Smart Technology designed to help reduce unwanted or nuisance alarms.
1)Alarm Dimensions: dia., ht.
Single Button Test/Silence eliminates confusion. Depending on what
2)Net Weight:
mode the alarm is in, pushing the button provides different functions such
3) Working Current :
4) Operating Voltage: DC9V
alarm condition has subsided. Perfect Mount System includes a
5) Audio Alarm : 85 Db at 10 feet.
gasketless base for easy installation and a new mounting bracket that
6) Temp Range :14℉( -10℃ ) to147℉ ( 60℃ )
keeps the alarm secure over a wide rotation range to allow for perfect
7) Humidity Range: ≤ 95%RH( 40±2℃ )
alignment.
8) Battery : 9V battery back-up for at least 1 year.
Dust Cover is included to keep the alarm clean during construction.
9) Protection area : 6 m high , 60 ㎡.
Easy Installation/Maintenance features include two screws for easy
“LATCHING ALARM” INDICATOR:
1-STORY RESIDENCE
Latching Alarm Indicator easily identifies initiating alarm even after the
access to install smoke alarm on the ceiling.
Improved UV Resistance keeps the alarm from discoloring over time.
FUNCTION:
Photoelectric technology is generally more sensitive than ionization
bursting into flame. Sources of these fires may include cigarettes.
The unit monitors the air, and when smoke reaches its sensing chamber, it
BEDROOM
LIVNG ROOM
BEDROOM BEDROOM
HALL
maintained and located where smoke can reach it, and where all residents
can hear it, as described in this manual. This unit will not sense gas, heat,
or flame. It cannot prevent or extinguish fires.
The alarm shall include a test button that will electronically simulate the
presence of smoke and cause the unit to go into alarm. This sequence
In insect infested areas, Insects can clog openings to the sensing chamber
On every level of your home, including finished attics and basements.
and cause unwanted alarms.
LIVNG ROOM
KITCHEN
FINISHED BASEMENT
BEDROOM KITCHEN DININQ ROOM
BEDROOM
LIVNG ROOM
BEDROOM
BEDROOM
HALL
LIVNG ROOM
SMOKM ALARMS FOR
MINIMUM PROTECTION
KITCHEN
FINISHED BASEMENT
INTERCONNECTED
AC OR AC/DC
SMOKE ALARMS
BEDROOM KITCHEN DININQ ROOM
KITCHEN GARAGE
BASEMENT
LATCHING ALARM:
unit was exposed
to alanm levels of smoke
LSTCHING NOT ACTIVATED:
unit was not exposed
to alanm levels of smoke
Figure 1
The Latching Alarm Indicator is automatically activated after an Alarm is
“noise” can interfere with the sensor.
In the hall near every sleeping area,, If your home has multiple sleeping
In “dead air” spaces. “Dead air” spaces may prevent smoke from reaching
areas, install a unit in each. If a hall is more than 40 feet (12 meters) long,
the Smoke Alarm.
Cautions:
HOW TO INSTALL THIS SMOKE ALARM
DO NOT stand close to the Alarm when the horn is sounding. Exposure at
exposed to alarm levels of smoke. After smoke levels drop below alarm
levels, the red LED will be On for 2 seconds/Off for 2 seconds, repeatedly.
Can be fixed in combination with other 39 items
basement stairway.
horn starts sounding..
LOCATIONS TO AVOID FOR SMOKE ALARMS
It is important to test this unit every week to make sure it is working properly.
For best performance, avoid installing Smoke Alarms in these areas:
Using the test button is the recommended way to test this Smoke Alarm.
Where combustion particles are produced. Combustion particles form when
Press and hold the test button on the cover of the unit until the alarm
something burns. Areas to avoid include poorly ventilated kitchens, garages,
sounds ( the unit may continue to alarm for a few seconds after you release
and furnace rooms. Keep units at least 20 feet (6 meters) from the sources
the button). If it does not alarm, make sure the unit is receiving power and
of combustion particles (stove, furnace, water heater, space heater) if
test it again. If it still does not alarm, replace it immediately. During testing,
possible. In areas where a 20-feet (6 meter) distance is not possible – in
you will hear a loud, repeating horn pattern:3 beeps ,pause , 3 beeps,
modular, mobile , or smaller homes , for example – it is recommended the
pause.
Smoke Alarm be placed as far from these fuel –burning sources as
reduce “unwanted” alarms. Unwanted alarms can occur if a Smoke Alarm is
placed directly next to a fuel-burning source. Ventilate these areas as much
possible .
sensing chamber of a Smoke Alarm near the kitchen.
We recommends one Smoke Alarm on every floor, in every sleeping area,
showers. Keep units at least10 feet (3 meters) away from showers, saunas,
and in every bedroom .
dishwashers, etc.
In new construction, the Smoke Alarms must be DC powered and
Where the temperatures are regularly below 14℉( -10℃ )or above147
interconnected. For additional coverage, it is recommended that you install
℉ ( 60℃ )
a Smoke Alarm in all rooms, halls, storage areas, finished attics, and
unfinished attics or basements.
could keep smoke from reaching the Smoke Alarms.
4)
close range may be harmful to your hearing. When testing, step away when
In vary damp, humid or steamy areas, or directly near bathrooms with
14℉( -10℃ ) to147℉ ( 60℃ ).Make sure no door or other obstruction
and screw up.
At the top of the first-to –second floor stairway, and at the bottom of the
Installing Smoke Alarms in Single –Family Residences
basements, where temperatures normally remain between
Open the cover of smoke alarm first install, the smoke on the ceiling,
completely closed.
In air streams near kitchens. Air currents can draw cooking smoke into the
Figure 2
3)
Less than 12 inches (305mm) away from fluorescent lights. Electrical
Alarms at a reasonable distance from a fuel-burning source, and thus
LIVNG ROOM
To later engage tamper –resist feature, twist out and set aside one of
the pins molded into plate. Both pins are exactly the same.
possible .The placement recommendations are intended to keep these
BEDROOM
2)
Inside every bedroom, especially if people sleep with the door partly or
as
alarms. It can give you more time to escape before fire spreads. This unit
can only give an early warning of developing fires if it is installed,
BEDROOM
HALL
KEY
KEY:
technology at detecting large particles, which tend to be produced in
greater amounts by smoldering fires, which may smolder for hours before
BEDROOM
MULTI-STORY RESIDENCE
b)Alarm Current: ≤15mA
1-STORY RESIDENCE
a)Static Current:≤12µA
silence and clearing the Latching feature.
MULTI-STORY RESIDENCE
as testing the alarm,silencing the alarm ,re-testing the alarm when in
More specifically, install Smoke Alarms:
install a unit at each end.
g
to remove mounting plate.
smoke away from the unit, preventing it from reaching sensing chamber.
including unheated buildings, outdoor rooms, porches, or
In very dusty, dirty , or greasy areas, Do not install a Smoke Alarm directly
over the stove or range. Clean a laundry room unit frequently to it free of
Figure 3
dust or lint.
Near fresh air vents ceiling fans, or in very drafty areas. Drafts can blow
正面
1)
From the back of smoke alarm, turn mounting plate counterclockwise
反面
成品尺寸:210*297MM
Download PDF
Similar pages