HPE ProLiant ML30 Generation9 | SOLO NETWORK

SOLO NETWORK (11) 4062-6971 (21) 4062-6971 (31) 4062-6971 (41) 4062-6971 (48) 4062-6971 (51) 4062-6971 (61) 4062-6971
HPE ProLiant ML30 Generation9 (Gen9)
SO
LO
N
ET
W
O
R
K
HPE ProLiant ML30 Gen9, delivers a full featured single-socket tower server with the right features at a competitive price, easy to
use and maintain for growing small businesses and remote branch offices.
Front View (details for 4LFF and 8SFF)
1
3
5
7
Four (4) LFF or Eight (8) SAS/SATA HDD cage
Media Drive Blank
Power On/Standby button and system power LED
button
Health LED
2
4
6
8
Four (4) USB 3.0 connectors
9.5mm Slim SATA DVD-ROM or DVD RW Optical
Drive
NIC status LED
UID (unit identification) button/LED
SO
LO
N
ET
W
O
R
K
SOLO NETWORK (11) 4062-6971 (21) 4062-6971 (31) 4062-6971 (41) 4062-6971 (48) 4062-6971 (51) 4062-6971 (61) 4062-6971
Rear View
1
3
5
7
PCI Slots (Slots 1-4)
USB 2.0 (2)
UID LED
HPE 350W Power Supply
2
4
6
8
USB 3.0 (2)
Video Connector
Power Supply Power Fan
NIC 1/shared iLO port (upper), NIC2 (lower)
Internal View
One (1) processor and heatsink
Power Supply
Front PCIe fan (optional)
Gen9 Smart Storage Battery Holder Kit
Four (4) PCIe expansion slots
SO
1
3
5
7
9
LO
N
ET
W
O
R
K
SOLO NETWORK (11) 4062-6971 (21) 4062-6971 (31) 4062-6971 (41) 4062-6971 (48) 4062-6971 (51) 4062-6971 (61) 4062-6971
2
4
6
8
System Fan
Four (4) DDR4 DIMM slots
Two (2) Internal USB 2.0 connectors (USB Type A,
Tape Drive Header)
MicroSD slot
SOLO NETWORK (11) 4062-6971 (21) 4062-6971 (31) 4062-6971 (41) 4062-6971 (48) 4062-6971 (51) 4062-6971 (61) 4062-6971
NOTE: For more information regarding Intel Xeon processors, please see the following http://www.intel.com/xeon.
Intel® Xeon® processor E3-1200v5 quad core processor family is designed to deliver the best combination of performance, built-in
capabilities, and cost-effectiveness. The product also supports Intel® Pentium® and Intel® Core-i3 dual core processors. Choose one of
the following processors based on the model:
L3 Cache
Power
DDR4 Hz
2
2
2
2
4
4
4
4
4
3MB
3MB
3MB
4MB
8MB
8MB
8MB
8MB
8MB
54W
51W
51W
51W
80W
80W
80W
80W
25W
2133
2133
2133
2133
2133
2133
2133
2133
2133
K
Cores
R
G4400
G4500
i3-6100
i3-6300
E3-1220v5
E3-1230v5
E3-1240v5
E3-1270v5
E3-1240Lv5
CPU
frequency
3.3GHz
3.5GHz
3.7GHz
3.8GHz
3.0GHz
3.4GHz
3.5GHz
3.6GHz
2.1GHz
O
Model
W
Processor
One of the following
depending on model
8MB (1x8MB) Level 3 cache
NOTE: For Quad-core Intel Xeon processors.
3MB (1 x 3MB) Level 3 Cache
NOTE: For Dual-core Intel Pentium® CoreTM i3 processors.
Chipset
Intel® C236 Chipset
NOTE: For more information regarding Intel® chipsets, please see the following
URL: http://www.intel.com/products/server/chipsets/
On System
Management
Chipset
HPE iLO (Firmware HPE iLO4 2.0 or later), 4GB NAND
NOTE: 1GB USB user space configurable via UEFI and accessible via iLO. Read and learn more in
the iLO QuickSpecs.
N
LO
Type:
DDR4 Unbuffered (UDIMM)
DIMM Slots Available
SO
Memory
ET
Cache Memory
One of the
following
depending on
model
4
4 DIMMs (2 Channels/ 2 DIMMs per
channel)
(4 x 16GB UDIMM @2133MHz)
Maximum Capacity
64GB
(UDIMM)
NOTE: For more information regarding HPE Server Memory
visit: http://www.hp.com/products/memory.
Memory
Protection
ECC
Network
Controller
HPE Ethernet 1Gb 2-port NC332i Adapter
SOLO NETWORK (11) 4062-6971 (21) 4062-6971 (31) 4062-6971 (41) 4062-6971 (48) 4062-6971 (51) 4062-6971 (61) 4062-6971
Expansion Slots
Expansion Technology Bus Connector
Bus
Slots #
Width
Width
Number
4
PCIe 3.0
x16
x16
3
PCIe 3.0
x1
x4
2
PCIe 3.0
x1
x4
1
PCIe 3.0
x4
x8
Form Factor
Notes
SO
LO
Maximum Internal
Storage
Hot Plug LFF SAS
One of the following Hot Plug SFF SAS
depending on
Hot Plug LFF SATA
model
Hot Plug SFF SATA
Non-Hot Plug LFF SATA
Hot Plug SFF SATA SSD
Hot Plug LFF SATA SSD
Power Supply
One of the following
depending on
model
R
ET
W
Optional SATA 9.5mm DVD-ROM Optical Drive
Optional SATA 9.5mm DVD RW Optical Drive
None ship standard
4 LFF drive bays (non-hot-plug and hot-plug)
8 SFF hot-plug drive bays
NOTE: HPE ProLiant ML30 Series servers offer both SFF and LFF
versions in CTO.
NOTE: All Pre-configured Models come populated with some hard drive
blanks installed. Should the customer need additional hard drive blanks,
they can order more using either P/N 666987-B21: HPE SFF HDD Blank
Kit or P/N 666986-B21: HPE LFF HDD Blank Kit.
N
Internal Storage Optical Drives
Devices
One of the following Hard Drives
depending on
Hard Drive Bays
model
O
Storage Controller Base Models
HPE Dynamic Smart Array B140i Controller
One of the following NOTE: B140i can't mix with any standup internal controller.
depending on
Performance Models HPE Dynamic Smart Array B140i Controller
model
NOTE: B140i can't mix with any standup internal controller.
K
Full length/full height
Full length/full height
Full length/full height
Half Length/Full
Height
NOTE: Bus Width indicates the number of physical electrical lanes running to the connector.
CAPACITY
32TB
16TB
32TB
16TB
16TB
960GB
480GB
CONFIGURATION
4 x 8TB
8x 2TB
4 x 8TB
8 x 2TB
4 x 4TB
8 x 120GB
4 x 120GB
HPE 350W ATX-Gen9 Power Supply FIO Kit
HPE 460W Redundant Power Supply
HPE Entry-Level Power Supplies provide lower-cost options for customers trying to balance their need
for enterprise class efficiency and reliability while maintaining lowest possible hardware costs. All EntryLevel power supply options have been designed specifically for HPE ProLiant Gen9 Essential Series
servers.
The HPE 350W FIO Power Supply is the standard, non-redundant AC power supply option for most HPE
ProLiant Gen9 Essential servers. It features Bronze-level (85%) certified power efficiency with a set of
features optimized for the Gen9 Essential-series rack and tower servers.
SOLO NETWORK (11) 4062-6971 (21) 4062-6971 (31) 4062-6971 (41) 4062-6971 (48) 4062-6971 (51) 4062-6971 (61) 4062-6971
The HPE 460W (Redundant) AC Power Supply can be configured with redundancy enablement kit to
support power redundancy in ProLiant ML30 Servers, providing additional protection against power
loss. With an 80 Plus Gold power efficiency rating (up to 92%), this power option helps to reduce
operating expenses while protecting against trapped power capacity in the data center.
K
All pre-configured servers ship with a standard 6-foot IEC C-13/C-14 jumper cord (A0K02A). This jumper
cord is also included with each standard AC power supply option kit. If a different power cord is required,
please check the ProLiant Power Cables web page.
R
To review the power requirements for your selected system, please use the HPE Power Advisor Tool
located at http://www.hp.com/go/hppoweradvisor.
O
Power Specification and Technical Content for supported power supplies can be found
at: http://www.hpe.com/h20195/v2/GetHTML.aspx?docname=c04111541.
Non-redundant
One (1) Non-redundant system
fan
Non-redundant
One (1) Non-redundant PCIe fan
Redundant
Redundant
N
1P model PCIe fan
ET
System Fans
One of the following 1P model system fan
depending on
model
W
Required Cabling Server Power Cords
The ProLiant ML30 server is a tower server that ships standard with a 6 country specific NEMA power
cord that allows connection to wall outlets in a home or office. If customers require additional local
power cords, they can check the power cord matrix for the appropriate country specific SKU.
Video
1 (rear)
Network RJ-45 (Ethernet)
2 (1 shared for HPE Integrated Lights-Out)
Micro SD Slot
1 (internal)
NOTE: The Micro-SD slot is not a hot-pluggable device. Customers should not attempt to plug a
Micro-SD card into the Micro-SD slot while the server is powered.
USB 3.0
6 (4 front, 2 rear)
USB 2.0
4 (2 rear, 1 internal standard USB, 1 internal USB header)
SO
LO
Interfaces
Operating
Systems and
Virtualization
Software Support
for ProLiant
Servers
Microsoft Windows Server
Red Hat Enterprise Linux (RHEL)
SUSE Linux Enterprise Server (SLES)
VMware
NOTE: VMWare availability is dependent on General availability from the vendor. HPE ProLiant
ML30 supports VMWare 5.5 U3 and 6.0 U1.
NOTE: For more information on HPE's Certified and Supported ProLiant Servers for OS and
Virtualization Software and latest listing of software drivers available for your server, please visit
our Support Matrix at: http://www.hp.com/go/ossupportand our driver download
page: http://h20566.www2.hpe.com/portal/site/hpsc?ac.admitted=1447391526103.125225703.19
38120508.
Upgradeability
Upgradeable to 4 cores
NOTE: Total 2 or 4 cores.
Up to 4 DIMM slots available for higher memory capacity
Up to 8 SFF Hard Drive Bays; or 4 LFF Hard Drive Bays
All PCIe3.0 I/O slots for additional communications and storage expansion
Redundant Power Supply
Optical Drive Bay
NOTE: Up to 2.
O
W
Integrated Matrox G200 video standard
• 1280 x 1024 (32 bpp)
• 1920 x 1200 (16 bpp)
HPE iLO 4 On System Management Memory
• 16 MB Flash
• 256 MB DDR 3 with ECC (112 MB after ECC and video)
ET
Graphics
R
Industry Standard ACPI 2.0b Compliant
Compliance
PCIe 3.0 Compliant
PXE Support
WOL Support
Microsoft® Logo certifications
USB 2.0 /3.0 Support
K
SOLO NETWORK (11) 4062-6971 (21) 4062-6971 (31) 4062-6971 (41) 4062-6971 (48) 4062-6971 (51) 4062-6971 (61) 4062-6971
LO
N
HPE Server
Unified Extensible Firmware Interface (UEFI) is an industry standard that provides better manageability
UEFI/Legacy ROM and more secured configuration than the legacy ROM while interacting with your server at boot time.
HPE ProLiant Gen9 platform defaults to UEFI and can be factory or field configured for Legacy BIOS
Boot Mode.
NOTE: The UEFI System Utilities function is analogous to the HPE ROM-Based Setup Utility (RBSU)
of legacy BIOS. For more information, please visit http://www.hpe.com/servers/uefi.
UEFI enables numerous new capabilities specific to HPE ProLiant servers such as:
• Secure Boot
Operating system specific functionality
•
Support for > 2.2 TB (using GPT) boot drives
•
USB 3.0 Stack
•
Embedded UEFI Shell
•
Mass Configuration Deployment Tool using RESTful API for iLO 4
•
PXE boot support for IPv6 networks
•
Boot support for option cards that only support a UEFI option ROM
•
Network Stack configurations
SO
•
NOTE: For UEFI Boot Mode, boot environment and OS image installations should be configured
properly to support UEFI.
SOLO NETWORK (11) 4062-6971 (21) 4062-6971 (31) 4062-6971 (41) 4062-6971 (48) 4062-6971 (51) 4062-6971 (61) 4062-6971
NOTE: UEFI FIO Setting (758959-B22) can be selected to configure the system in Legacy mode in
the factory for your HPE ProLiant Gen9 Server.
R
4 LFF Drive Bay Cage:
4.6" (11.72cm) Height x 5.74" (14.57cm) Width x 6.90" (17.54cm) Length
K
Form Factor
Micro ATX Tower (4U) chassis with feet/bezel:
One of the following 14.5" (36.82cm) Height x 6.89" (17.5cm) Width x 18.71" (47.52cm) Length
depending on
8 SFF Drive Bay Cage:
model
4.6" (11.74cm) Height x 5.74" (14.57cm) Width x 4.79" (12.15cm) Length
Embedded
Management
O
HPE Integrated Monitor your servers for ongoing management, service alerting, reporting and
remote management with HPE iLO. Not available on ML10 Gen9. Learn more
Lights-Out
at http://www.hpe.com/info/ilo.
(HPE iLO)
Configure and boot your servers securely with industry standard Unified
Extensible Firmware Interface (UEFI). Learn more
at http://www.hpe.com/servers/uefi.
RESTful API
RESTful API for iLO 4 is Redfish 1.0 conformance for simplified server
management such as configuration and maintenance tasks based on modern
industry standards. Learn more at http://www.hpe.com/info/restfulapi.
Intelligent
Provisioning
Hassle free server and OS provisioning for 1 or few servers with Intelligent
Provisioning. Learn more
at http://www.hpe.com/servers/intelligentprovisioning.
N
ET
W
UEFI
LO
Embedded
The Hewlett Packard Enterprise embedded remote support, when used with
Remote Support Insight Online direct connect or HPE Insight Remote Support, allows HPE
ProLiant servers to transmit hardware events directly to Hewlett Packard
Enterprise or a Hewlett Packard Enterprise Authorized Partner for automated
phone home support. Learn more
at http://www.hpe.com/info/insightonline/explore.
Smart Update
SO
Server utilities
Optimize firmware and driver updates with Smart Update solutions including
Smart Update Manager (SUM) and Service Pack for ProLiant (SPP) and smart
components. Learn more
at http://www.hpe.com/servers/smartupdatemanager.
HPE Systems HPE SIM allows you to monitor the health of your HPE ProLiant Servers and HPE
Insight Manager Integrity Servers, and also provides you with basic support for non-HPE servers.
HPE SIM also integrates with Smart Update Manager to provide quick and
(HPE SIM)
seamless firmware updates. Learn more
at http://www.hpe.com/servers/hpsim.
Scripting Tool
Kit and
Provision 1 to many servers using your own scripts to discover and deploy them
with Scripting Tool Kit (STK) for Windows and Linux or Scripting Tools for
SOLO NETWORK (11) 4062-6971 (21) 4062-6971 (31) 4062-6971 (41) 4062-6971 (48) 4062-6971 (51) 4062-6971 (61) 4062-6971
Windows PowerShell. Learn more
at http://www.hpe.com/servers/proliant/stk or http://www.hpe.com/serve
rs/powershell.
RESTful
Interface Tool
RESTful Interface tool is a scripting tool to provision using RESTful API for iLO 4
to discover and deploy servers at scale. Learn more
at http://www.hpe.com/info/resttool.
K
Windows
PowerShell
O
HPE Insight Online, available at no additional cost as part of your Hewlett Packard
Enterprise warranty, Care Pack or contractual support agreement with Hewlett
Packard Enterprise, is a personalized dashboard for simplified tracking of IT
operations and support information from anywhere, anytime. Learn more
at http://www.hpe.com/info/insightonline/explore.
W
HPE Insight
Online
R
HPE iLO Mobile Enables the ability to access, deploy, and manage your server anytime from
anywhere from select smartphones and mobile devices. For additional information
Application
please visit: http://www.hpe.com/info/ilo/mobileapp.
Power-on password
Setup password
Power switch security
Administrator's password
TPM 1.2
TPM 2.0
UEFI
Warranty
This product is covered by a global limited warranty and supported by HPE Services and a worldwide
network of HPE Authorized Channel Partners resellers. Hardware diagnostic support and repair is
available for three years from date of purchase. Support for software and initial setup is available for 90
days from date of purchase. Enhancements to warranty services are available through HPE Care Pack
services or customized service agreements. Hard drives have either a one year or three year warranty;
refer to the specific hard drive QuickSpecs for details.
NOTE: Server Warranty includes 3-Year Parts, 1-Year Labor, 1-Year Onsite support with next
business day response. Warranty repairs may be accomplished through the use of Customer Self
Repair (CSR) parts. These parts fall into two categories: 1) Mandatory CSR parts are designed for
easy replacement. A travel and labor charge will result when customers decline to replace a
Mandatory CSR part; 2) Optional CSR parts are also designed for easy replacement but may
involve added complexity. Customers may choose to have Hewlett Packard Enterprise replace
Optional CSR parts at no charge. Additional information regarding worldwide limited warranty
and technical support is available
at: http://h18004.www1.hp.com/products/servers/platforms/warranty/index.html.
SO
LO
N
ET
Security
SOLO NETWORK (11) 4062-6971 (21) 4062-6971 (31) 4062-6971 (41) 4062-6971 (48) 4062-6971 (51) 4062-6971 (61) 4062-6971
iLO Essentials
HPE iLO Essentials is the preferred license for small and medium business that
offers full remote server management capabilities for small and medium business
via the Integrated Remote Console (IRC), virtual media, and e-mail based alerts.
Learn more about HPE iLO Essentials
at http://www.hpe.com/servers/iLO/essentials.
iLO Scale-Out
HPE iLO Scale-Out is the preferred license built for web hosting, cloud service
providers, and high performance computing data centers, managing massive scale
out environments for the DL 100 and 10 series servers, not available for ML
servers. This license offers sophisticated scripting tools that provides remote
access through Text Console via SSH, Dynamic power capping, Email-based
Alerting and proactive notifications. For more information,
visit http://www.hpe.com/servers/iLO/scale-out.
iLO Advanced
HPE iLO Advanced licenses offer smart remote functionality without compromise,
for all HPE ProLiant servers. The license includes the full integrated remote
console, virtual keyboard, video, and mouse (KVM), multi-user collaboration,
console record and replay, and GUI-based and scripted virtual media and virtual
folders. You can also activate the enhanced security and power management
functionality. Learn more about HPE iLO Advanced
at http://www.hpe.com/servers/iloadvanced.
HPE Insight
Control
HPE Insight Control, lets you deploy, migrate, monitor, remote control, and
optimize your IT infrastructure through a single, simple management console. For
more information, see http://www.hpe.com/info/insightcontrol.
N
Server
Management
ET
W
O
R
K
Embedded
Management
LO
HPC Interconnects NOTE: High Performance Computing (HPC) interconnect technologies are available for this server
under the HPE Cluster Platform product portfolio. These high-speed interconnects are fully
supported by Hewlett Packard Enterprise when they are part of these configure to order clusters.
Solutions can be defined with a lot of flexibility with the help of configuration tools. Please visit the
following URL to configure HPEC Clusters with InfiniBand
Interconnects: http://www.hp.com/techservers/clusters/ucp/index.html.
SO
Storage Software Whether you need to solve a specific data protection, archiving, or storage command and control
challenge, or deliver on strategic consolidation, compliance, or continuity initiatives, look no further
than Hewlett Packard Enterprise storage software. Our storage software helps you reduce costs, simplify
storage infrastructure, protect vital assets and respond faster to business opportunities.
Storage software that gets the job done:
•
•
Data Protection and Recovery Software
Whether you're a large enterprise or a smaller business, Hewlett Packard Enterprise data
protection and recovery software will cost-effectively protect you against disaster and ensure
business continuity.
Data Archive and Migration Software
Hewlett Packard Enterprise storage software enables you to comply with data retention and
retrieval requirements, improve application performance, and reduce costs by efficiently
migrating infrequently accessed or less valuable data to lower cost storage.
SOLO NETWORK (11) 4062-6971 (21) 4062-6971 (31) 4062-6971 (41) 4062-6971 (48) 4062-6971 (51) 4062-6971 (61) 4062-6971
•
W
O
•
K
•
Storage Resource Management Software (SRM)
Hewlett Packard Enterprise storage resource management software reduces operational costs
and provides the command and control foundation you need to efficiently manage and visualize
your physical and virtual environments.
Data Replication Software
Hewlett Packard Enterprise offers array-based and host-based replication software for use in
disaster recovery, testing, application development and reporting.
Storage Device Management Software
Maximize your investment in Hewlett Packard Enterprise storage and networking with software
that enables hardware-specific configuration, performance tuning and connectivity
management.
HPE StoreVirtual VSA
With HPE StoreVirtual VSA you can use the power of virtualization to create a virtual array
within your host server. Manage it as a single pool of shared storage capacity, and scale it to
match your evolving needs. HPE ProLiant Gen9 servers include a 3-year limited license for HPE
StoreVirtual VSA software with 1TB of capacity at no extra cost. Simply select to install HPE
StoreVirtual VSA software during server setup within Intelligent Provisioning. More information,
instructional videos, and free console management software are available
at http://www.hp.com/go/vsa1TB.
R
•
ET
NOTE: For more information about Storage Software including QuickSpecs, please
see: http://www.hp.com/go/storage/software.
SO
LO
N
One Config Simple SCE is a guided self-service tool to help sales and non-technical people provide customers with initial
(SCE)
configurations in 3 to 5 minutes. You may then send the configuration on for configuration help, or use in
your existing ordering processes. If you require "custom" rack configuration or configuration for products
not available in SCE, please contact Hewlett Packard Enterprise Customer Business Center or an
Authorized Partner for assistance. https://h22174.www2.hp.com/SimplifiedConfig/Index.
SOLO NETWORK (11) 4062-6971 (21) 4062-6971 (31) 4062-6971 (41) 4062-6971 (48) 4062-6971 (51) 4062-6971 (61) 4062-6971
HPE Technology Services delivers confidence, reduces risk and helps customers realize agility and stability.
Connect to Hewlett Packard Enterprise to help prevent problems and solve issues faster. HPE Support
Services enable you to choose the right service level, length of coverage and response time as you purchase
your new server, giving you full entitlement to the support for need for your IT and business.
Connect your
devices
Unlock all of the benefits of your technology investment by connecting your products to Hewlett Packard
Enterprise. Achieve up to 77%1 reduction in down time, near 100%2 diagnostic accuracy and a single
consolidated view of your environment. By connecting, you will receive 24x7monitoring, pre-failure alerts,
automatic call logging, and automatic parts dispatch. HPE Proactive Care Service and HPE Datacenter Care
Service customers will also benefit from proactive activities to help prevent issues and increase optimization.
All of these benefits are already available to you with your server storage and networking products, securely
connected to Hewlett Packard Enterprise support.
R
K
HPE Support
Services
1- IDC 2 – HP CSC reports 2014 - 2015
O
Basic: HPE Foundation Care NBD, three-year Support Service
HPE Foundation Care Next Business Day connects you to Hewlett Packard Enterprise during business hours
for assistance on resolving issues – This service features need based next business day hardware onsite
response and software call back within two hours. In addition, Collaborative software support and provides
troubleshooting assistance on industry leading software running on your HPE server. Simplify your support
experience and make Hewlett Packard Enterprise your first call to help resolve hardware or software
problems.
http://www.hpe.com/h20195/V2/GetDocument.aspx?docname=4AA4-8876ENW&cc=us&lc=en
ET
W
Recommended
Support
LO
N
Standard: HPE Foundation Care 24x7, three-year Support Service
HPE Foundation Care 24x7 gives you access to Hewlett Packard Enterprise 24 hours a day, seven days a
week for assistance on resolving issues. This service includes need based Hardware onsite response within
four hours. In addition, collaborative software support is included in this service that provides
troubleshooting assistance on industry leading software running on your HPE server. Simplify your support
experience and make Hewlett Packard Enterprise your first call to help resolve hardware or software
problems.
http://www.hpe.com/h20195/V2/GetDocument.aspx?docname=4AA4-8876ENW&cc=us&lc=en
SO
Optimized: HPE Proactive Care* with 24x7 coverage, three year Support Service
HPE Proactive Care gives customers an enhanced call experience. When your products are connected to
Hewlett Packard Enterprise, Proactive Care helps prevent problems and maintains IT stability by utilizing
personalized proactive reports with recommendations and advice. This service combines three years
proactive reporting and advice with our 24x7 coverage, four hour hardware response time when there is a
problem. This service also includes collaborative software support for Independent Software Vendors
(ISVs), (Red Hat, VMWare, Microsoft, etc.) running on your HPE servers.
Parts and
Materials
Hewlett Packard Enterprise will provide Hewlett Packard Enterprise-supported replacement parts and
materials necessary to maintain the covered hardware product in operating condition, including parts and
materials for available and recommended engineering improvements.
Parts and components that have reached their maximum supported lifetime and/or the maximum usage
limitations as set forth in the manufacturer's operating manual, product QuickSpecs, or the technical product
data sheet will not be provided, repaired, or replaced as part of these services.
The defective media retention service feature option applies only to Disk or eligible SSD/Flash Drives
replaced by Hewlett Packard Enterprise due to malfunction.
SOLO NETWORK (11) 4062-6971 (21) 4062-6971 (31) 4062-6971 (41) 4062-6971 (48) 4062-6971 (51) 4062-6971 (61) 4062-6971
Related Services HPE Server Hardware Installation
Provides for the basic hardware installation of Hewlett Packard Enterprise branded servers, storage devices
and networking options to assist you in bringing your new hardware into operation in a timely and
professional manner.
https://www.hpe.com/h20195/V2/GetPDF.aspx/5981-9356EN.pdf
R
K
HPE Installation and Startup Service
Provides for the installation and startup of Hewlett Packard Enterprise technology including BladeSystems,
C-Class enclosure, HPE ProLiant c-Class and Integrity server blades, storage blades, SAN switch blades, HPE
Virtual Connect modules (Ethernet and Fibre Channel), Ethernet network interconnects, and InfiniBand, as
well as the installation of one supported operating system type (Windows® or Linux).
W
O
HPE Technology Services Support Credits
Offer flexible services and technical skills to meet your changing IT demands. With a menu of service that is
tailored to suit your needs, you get additional resources and specialist skills to help you maintain peak
performance of your IT. Offered as annual credits, you can plan your budgets while proactively responding to
your dynamic business.
Keep your IT staff trained making sure they have the right skills to deliver on your business outcomes. Book
on a class today and learn how to get the most from your technology
investment. http://www.hpe.com/ww/learn
HPE Support
Center
The HPE Support Center is a personalized online support portal with access to information, tools and
experts to support Hewlett Packard Enterprise business products. Submit support cases online, chat with
Hewlett Packard Enterprise experts, access support resources or collaborate with peers.
ET
HPE Education
Services
N
Learn more http://www.hpe.com/support/hpesc
LO
The Hewlett Packard Enterprise Support Center Mobile App* allows you to resolve issues yourself or quickly
connect to an agent for live support. Now, you can get access to personalized IT support anywhere, anytime.
HPE Insight Remote Support and HPE Support Center are available at no additional cost with a Hewlett
Packard Enterprise warranty, HPE Support Service or Hewlett Packard Enterprise contractual support
agreement.
*HPE Support Center Mobile App is subject to local availability.
SO
For more information: http://www.hpe.com/services
SOLO NETWORK (11) 4062-6971 (21) 4062-6971 (31) 4062-6971 (41) 4062-6971 (48) 4062-6971 (51) 4062-6971 (61) 4062-6971
1. Pre-configured models ship with the configurations below. Options can be selected from the Core or Additional options section
of this QuickSpecs.
2. Not all models are available in all regions. Check with your local country Hewlett Packard Enterprise offices for availability.
Number of Processors
Memory
One
4GB (1x4GB UDIMMs, 2133 MHz)
Network Controller
Storage Controller
Hard Drive
Internal Storage
W
ET
1; (Optional: DVD-ROM, DVD-RW)
None
4 PCIe 3.0 slots
(1) 350W ATX Power Supply
(1) 460W Redundant Power Supply
1 non hot plug, non-redundant
iLO Management (standard), Intelligent Provisioning (standard), iLO Essentials
(optional), iLO Scale-out (optional only for DL), iLO Advanced (optional)
Tower (4U)
Server Warranty includes 3-Year Parts, 1-Year Labor, 1-Year Onsite support with next
business day response.
NOTE: APJ Server Warranty includes 3-Year Parts, 3-Year Labor, 3-Year Onsite
support with next business day response.
N
Form Factor
Warranty
Broadcom 5720 Dual-port 1GbE
HPE Dynamic Smart Array B140i
None ship standard; includes 2 LFF hard drive blanks
4 LFF HDD Bays (Hot Plug)
LO
Optical Drive Bay
Optical Drive
PCI-Express Slots
Power Supply
Fans
Management
8GB (1x8GB UDIMMs, 2133 MHz)
O
Processor
R
K
[SKU Number]
Model Name
Base Models
Performance Models
824379-xx1
830893-xx1
HPE ProLiant ML30 Gen9 E3-1220v5 1P HPE ProLiant ML30 Gen9 E3-1240v5 1P
4GB-U B140i 4LFF SATA 350W PS Base 8GB-U B140i 4LFF SATA 460W RPS Perf
Server
Server
Intel® Xeon® E3-1220v5
Intel® Xeon® E3-1240v5
SO
Country Code Key xx1 = B21
Worldwide
xx1 = 001
US
xx1 = 421
EU
xx1 = 031
UK
xx1 = 371
AP
xx1 = 291
Japan
xx1 = AA1
PRC
NOTE: Not all models are available in all regions. Check with your local country Hewlett Packard
Enterprise offices for availability.
SOLO NETWORK (11) 4062-6971 (21) 4062-6971 (31) 4062-6971 (41) 4062-6971 (48) 4062-6971 (51) 4062-6971 (61) 4062-6971
K
This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid configurations are
ordered, Hewlett Packard Enterprise recommends the use of an HPE approved configurator. Contact your local sales
representative for information on configurable product offerings and requirements.
1. Factory Integrated Models must start with a CTO Server.
2. FIO indicates that this option is only available as a factory installable option.
3. All Factory Integrated Models will be populated with sufficient hard drive blanks based on the number of initial hard drives
ordered with the server.
4. Some options may not be integrated at the factory. Contact your local sales representative for additional information.
R
Step 1: Base Configuration (choose one of the following configurable models)
[Chassis]
O
HPE ProLiant ML30 Gen9
HPE ProLiant ML30 Gen9
HPE ProLiant ML30 Gen9
Non-hot Plug 4LFF
Hot Plug 4LFF Configure-toHot Plug 8SFF Configure-toConfigure-to-order Server
order Server
order Server
823401-B21
823402-B21
823403-B21
1
1
1
4 DIMM slots for UDIMM DDR4 Memory
HPE Dynamic Smart Array B140i
4 PCIe 3.0 slots
4LFF Non Hot Plug
4LFF Hot Plug
8SFF Hot Plug
Broadcom 5720 Dual-port 1GbE
1 non hot plug, non-redundant
iLO Management (standard), Intelligent Provisioning (standard)
4 front, 4 rear, 2 internal
N
ET
W
SKU Number
Processor
DIMM Slots
Storage Controller
PCIe
Drive Cage
Network Controller
Fans
Management
USB
LO
Step 2: Choose Required Options (only one of the following from each list unless otherwise
noted)
HPE Processors
ML30
Select one processor from Core options-Processor section below
Select one xxxxxx-L21.
Only one processor supported.
DDR4 speed is the maximum memory speed of the processor. Actual memory speed may depend
on the quantity and type of DIMMs installed.
SO
•
•
•
HPE Memory
For the Intel® C236 Chipset E3-1200 Series, the letter preceding the model number indicates the Product
Line (E3, E5, E7); 1200x v#, 1 is the number of CPU, 2 is socket type/segment designation, 00 = Processor
SKU, x = L for low power SKUs and v# (not yet designated) is the version number.
Select one or more memory from Core options-Memory section below,
•
•
•
HPE memory from previous generation servers are not qualified or warranted with this HPE
ProLiant Server.
HPE Standard Memory (UDIMM) is required to realize the memory performance improvements
and enhanced functionality listed in this document for this HPE ProLiant Server.
With one processor installed, four DIMMs slots are available.
SOLO NETWORK (11) 4062-6971 (21) 4062-6971 (31) 4062-6971 (41) 4062-6971 (48) 4062-6971 (51) 4062-6971 (61) 4062-6971
•
•
HPE Power
Supplies
For more information on ProLiant Energy Efficient Features,
see: http://www.hp.com/go/proliant-energy-efficient.
Depending on the memory configuration and processor model, the memory speed would run at
2133MHz. Please see Memory Population Table or the Online Memory Configuration Tool
at: http://www.hp.com/go/ddr4config.
Select a standup NIC adapter from Core options-Networking section below,
•
•
HPE Drives
N
•
Please see the QuickSpecs for Technical Specifications and additional
information: http://www.hp.com/go/ProLiantNICs.
These options are upgradeable and can be changed from the original configuration after the
server is shipped.
For 10Gb adapters, a minimum of two Gigabytes (2 GB) of server memory is required per each
adapter.
ET
HPE Networking
W
Step 3: Choose Additional Factory Integratable Options
O
R
K
Select one or more power supplies from Core Options-Power Supplies section below:
• Prior to selecting a power supply option, it is highly recommended that you review your server
configuration in the HPE Power Advisor tool to determine the right size power supply for your
server configuration. The HPE Power Advisor is located
at: http://www.hp.com/go/hppoweradvisor.
• Mixing of power supplies in the same server is not supported. All power supplies must be of the
same input voltage, output rating, and efficiency rating. If non-matching power supplies are
installed, you may receive an error message and/or experience operational issues with your
server.
Select one or more drives from Core options-HPE Drives section below:
The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the
server backplane) should operate at the same data transfer rate or the system bandwidth will be
negotiated down to an acceptable level for all components.
Hard drives have either a one year or three year warranty; refer to the specific hard drive
QuickSpecs for details.
The HPE ProLiant Gen9 Smart Storage solutions are equipped with re-designed Small Form
Factor (SFF 2.5 in) and Large Form Factor (LFF 3.5 in) hot plug carriers for HPE Qualified Hard
Drives and Solid State Drives. These new carriers provide status and activity indicators as well as
caution indicators for "Do Not Remove".
LO
•
•
SO
•
HPE Graphics
Options
Select one or more graphics adapter from Additional options section below.
•
•
HPE Unique
Options
Please see the HPE Power Advisor for estimated power consumption of your individual system
configuration prior to installing GPUs. The HPE Power Advisor is located
at: http://www.hp.com/go/hppoweradvisor.
This section may contain FIO options, please see HPE Computation & Graphics Accelerators
section below.
Select one or more Unique options from Core options section below.
SOLO NETWORK (11) 4062-6971 (21) 4062-6971 (31) 4062-6971 (41) 4062-6971 (48) 4062-6971 (51) 4062-6971 (61) 4062-6971
•
•
Select one or more Fan Kits from Core options section below.
Select one or more Storage options from Additional options section below.
•
The embedded B140i controller will operate in UEFI only mode. For legacy support an additional
controller will be needed, and for CTO orders please also select the Legacy mode settings part,
758959-B22
This section may contain FIO options, please see HPE Storage Controllers section below.
FIO indicates that this option is only available as a factory installable option.
SO
LO
N
ET
W
•
•
R
HPE Storage
Controllers
This section may contain FIO options, please see HPE Cooling Options section below.
FIO indicates that this option is only available as a factory installable option.
K
•
•
O
HPE Cooling
Options
This section may contain FIO options, please see the Unique options section below.
FIO indicates that this option is only available as a factory installable option.
SOLO NETWORK (11) 4062-6971 (21) 4062-6971 (31) 4062-6971 (41) 4062-6971 (48) 4062-6971 (51) 4062-6971 (61) 4062-6971
NOTE: Some options may not be integrated at the factory. To ensure only valid configurations are ordered, Hewlett Packard
Enterprise recommends the use of an HPE approved configurator. Contact your local sales representative for additional
information.
HPE Unique
HPE ML30 Gen9 Slim Optical Disk Drive Enablement Kit
820288-B21
Options
HPE ML30 Gen9 Front PCI Redundant Fan Kit
820290-B21
NOTE: Required for any PCI-E card.
K
822384-B21
822607-B21
822608-B21
R
HPE ML30 Gen9 350W E-star 2.0 Power Supply Kit
HPE ML30 Gen9 4U Redundant Power Supply Enablement Kit
HPE ML30 Gen9 4 Large Form Factor Hot Plug Hard Drive Cage Kit
NOTE: The LFF Kit is a backplane kit designed for going from NHP LFF to
hot-plug LFF.
822756-B21
417705-B21
Entry Processors
HPE ML30 Gen9 Intel® Pentium® G4400 (3.3GHz/2-core/3MB/54W) FIO
Processor Kit
HPE ML30 Gen9 Intel® Pentium® G4500 (3.5GHz/2-core/3MB/51W) FIO Processor
Kit
HPE ML30 Gen9 Intel® Core™ i3-6300 (3.8GHz/2-core/4MB/51W) FIO Processor
Kit
HPE ML30 Gen9 Intel® Core™ i3-6100 (3.7GHz/2-core/3MB/51W) FIO Processor
Kit
Base Processors
HPE ML30 Gen9 Intel® Xeon® E3-1220v5 (3.0GHz/4-core/8MB/80W) FIO
Processor Kit
HPE ML30 Gen9 Intel® Xeon® E3-1230v5 (3.4GHz/4-core/8MB/80W) FIO
Processor Kit
Performance Processors
HPE ML30 Gen9 Intel® Xeon® E3-1240Lv5 (2.1GHz/4-core/8MB/25W) FIO
Processor Kit
HPE ML30 Gen9 Intel® Xeon® E3-1240v5 (3.5GHz/4-core/8MB/80W) FIO
Processor Kit
HPE ML30 Gen9 Intel® Xeon® E3-1270v5 (3.6GHz/4-core/8MB/80W) FIO
Processor Kit
SO
LO
N
HPE Processors
ET
W
O
HPE ML30 Gen9 8 Small Form Factor Hot Plug Hard Drive Cage Kit
NOTE: The SFF Kit is the cage plus backplane and designed to convert from
any LFF configuration to SFF.
HP Tower to Rack Conversion Tray Universal Kit
NOTE: Require HPE ML30 Gen9 Front PCI Fan Kit (820290-B21).
NOTE: ML30 Gen9 is not designed for a data center rack application
environment, the Tower to Rack setting can be located in the office
environment up to 35C ambient.
HPE Memory
Unbuffered DIMMs (UDIMMs)
HPE 4GB (1x4GB) Single Rank x8 DDR4-2133 CAS-15-15-15 Unbuffered Standard
Memory Kit
820295-L21
823389-L21
823379-L21
837095-L21
820293-L21
823371-L21
820299-L21
823373-L21
823375-L21
805667-B21
SOLO NETWORK (11) 4062-6971 (21) 4062-6971 (31) 4062-6971 (41) 4062-6971 (48) 4062-6971 (51) 4062-6971 (61) 4062-6971
819880-B21
726536-B21
726537-B21
820288-B21
O
NOTE: The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the
server backplane) should operate at the same data transfer rate or the system bandwidth will be
negotiated down to an acceptable level for all components.
NOTE: Hard drives have either a one year or three year warranty; refer to the specific hard drive
QuickSpecs for details.
SAS Hot Plug SFF (2.5-inch) Enterprise (ENT) Drives
HP 1.2TB 6G SAS 10K rpm SFF (2.5-inch) SC Dual Port Enterprise 3yr Warranty
718162-B21
Hard Drive
HP 900GB 6G SAS 10K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard Drive
652589-B21
HP 600GB 12G SAS 15K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard Drive
759212-B21
HP 600GB 6G SAS 10K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard Drive
652583-B21
HP 450GB 12G SAS 15K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard Drive
759210-B21
HP 450GB 6G SAS 10K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard Drive
652572-B21
HP 300GB 12G SAS 15K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard Drive
759208-B21
HP 300GB 6G SAS 10K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard Drive
652564-B21
HP 146GB 6G SAS 15K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard Drive
652605-B21
HP 600GB 12G SAS 10K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard
781516-B21
Drive
HP 1.2TB 12G SAS 10K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard Drive
781518-B21
HP 1.8TB 12G SAS 10K rpm SFF (2.5-inch) SC Enterprise 512e 3yr Warranty Hard
791034-B21
Drive
HP 3TB 6G SATA 7.2K rpm LFF (3.5-inch) Non-hot plug Midline 1yr Warranty
628065-B21
Hard Drive
HP 2TB 6G SATA 7.2K rpm LFF (3.5-inch) Non-hot plug Midline 1yr Warranty
659339-B21
Hard Drive
NOTE: User may select any combination of SAS or SATA Hard Drives.
SAS drives require the selection of a SAS controller. See card lists in
Controllers section.
If B140i is the primary controller, user can only select SATA drives.
SO
LO
N
ET
W
HPE Drives
805671-B21
R
HPE Optical Drives HP 9.5mm SATA DVD-ROM JackBlack Gen9 Optical Drive
HP 9.5mm SATA DVD-RW JackBlack G9 Optical Drive
HPE ML30 Gen9 Slim Optical Disk Drive Enablement Kit
NOTE: Max=1 if selected together with 460W Hot Plug Power Supply.
805669-B21
K
HPE 8GB (1x8GB) Dual Rank x8 DDR4-2133 CAS-15-15-15 Unbuffered Standard
Memory Kit
HPE 16GB (1x16GB) Dual Rank x8 DDR4-2133 CAS-15-15-15 Unbuffered Standard
Memory Kit
HPE 8GB (1x8GB) Single Rank x8 DDR4-2133 CAS-15-15-15 Unbuffered Standard
Memory Kit
HP 300GB 12G SAS 10K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard
Drive
HP 900GB 12G SAS 10K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard
Drive
785067-B21
785069-B21
SOLO NETWORK (11) 4062-6971 (21) 4062-6971 (31) 4062-6971 (41) 4062-6971 (48) 4062-6971 (51) 4062-6971 (61) 4062-6971
801882-B21
801884-B21
801886-B21
801888-B21
K
HP 1TB 6G SATA 7.2K rpm LFF (3.5in) Non-hot Plug Standard 1yr Warranty Hard
Drive
HP 2TB 6G SATA 7.2K rpm LFF (3.5in) Non-hot Plug Standard 1yr Warranty Hard
Drive
HP 3TB 6G SATA 7.2K rpm LFF (3.5in) Non-hot Plug Standard 1yr Warranty Hard
Drive
HP 4TB 6G SATA 7.2K rpm LFF (3.5in) Non-hot Plug Standard 1yr Warranty Hard
Drive
HP 1TB 6G SATA 7.2K rpm LFF (3.5-inch) Non-hot plug Midline 1yr Warranty Hard
Drive
HP 500GB 6G SATA 7.2K rpm LFF (3.5-inch) Non-hot plug Midline 1yr Warranty
Hard Drive
SAS Hot Plug SFF (2.5-inch) Midline (MDL) Drives
HP 1TB 6G SAS 7.2K rpm SFF (2.5-inch) SC Midline 1yr Warranty Hard Drive
HP 500GB 6G SAS 7.2K rpm SFF (2.5-inch) SC Midline 1yr Warranty Hard Drive
HPE 1TB 12G SAS 7.2K rpm SFF (2.5in) SC Midline 1yr Warranty Hard Drive
HP 1TB 12G SAS 7.2K rpm SFF (2.5-inch) SC 512e 1yr Warranty Hard Drive
HP 2TB 12G SAS 7.2K rpm SFF (2.5-inch) SC 512e 1yr Warranty Hard Drive
NOTE: User may select any combination of SAS or SATA Hard Drives.
SAS drives require the selection of a SAS controller. See card lists in
Controllers section.
If B140i is the primary controller, user can only select SATA drives.
ET
W
O
R
659337-B21
SO
LO
N
SAS Hot Plug LFF (3.5-inch) Enterprise (ENT) Drives
HP 450GB 12G SAS 15K rpm LFF (3.5-inch) SC Converter Enterprise 3yr Warranty
Hard Drive
HP 300GB 12G SAS 15K rpm LFF (3.5-inch) SC Converter Enterprise 3yr Warranty
Hard Drive
HP 600GB 12G SAS 15K rpm LFF (3.5-inch) SC Converter Enterprise 3yr Warranty
Hard Drive
HP 6TB 12G SAS 7.2K rpm LFF (3.5-inch) SC 512e Helium 1yr Warranty Hard Drive
HP 8TB 12G SAS 7.2K rpm LFF (3.5-inch) SC 512e Helium 1yr Warranty Hard Drive
NOTE: User may select any combination of SAS or SATA Hard Drives.
SAS drives require the selection of a SAS controller. See card lists in
Controllers section.
If B140i is the primary controller, user can only select SATA drives.
SAS Hot Plug LFF (3.5-inch) Midline (MDL) Drives
HP 6TB 6G SAS 7.2K rpm LFF (3.5-inch) SC Midline 1yr Warranty Hard Drive
HP 4TB 6G SAS 7.2K rpm LFF (3.5-inch) SC Midline 1yr Warranty Hard Drive
HP 3TB 6G SAS 7.2K rpm LFF (3.5-inch) SC Midline 1yr Warranty Hard Drive
HP 2TB 6G SAS 7.2K rpm LFF (3.5-inch) SC Midline 1yr Warranty Hard Drive
HP 1TB 6G SAS 7.2K rpm LFF (3.5-inch) SC Midline 1yr Warranty Hard Drive
HPE 4TB 12G SAS 7.2K rpm LFF (3.5-inch) SC Midline 1yr Warranty Hard Drive
HP 4TB 12G SAS 7.2K rpm LFF (3.5-inch) SC Midline 512e 1yr Warranty Hard Drive
HP 6TB 12G SAS 7.2K rpm LFF (3.5-inch) SC Midline 512e 1yr Warranty Hard Drive
659341-B21
652749-B21
652745-B21
832514-B21
765464-B21
765466-B21
737394-B21
737261-B21
765424-B21
793699-B21
793703-B21
761477-B21
695510-B21
652766-B21
652757-B21
652753-B21
818367-B21
765257-B21
765259-B21
SOLO NETWORK (11) 4062-6971 (21) 4062-6971 (31) 4062-6971 (41) 4062-6971 (48) 4062-6971 (51) 4062-6971 (61) 4062-6971
793671-B21
793669-B21
818365-B21
K
HP 6TB 12G SAS 7.2K rpm LFF (3.5-inch) SC 512e Performance 1yr Warranty Hard
Drive
HP 4TB 12G SAS 7.2K rpm LFF (3.5-inch) SC 512e Performance 1yr Warranty Hard
Drive
HPE 2TB 12G SAS 7.2K rpm LFF (3.5-inch) SC Midline 1yr Warranty Hard Drive
NOTE: User may select any combination of SAS or SATA Hard Drives.
SAS drives require the selection of a SAS controller. See card lists in
Controllers section.
If B140i is the primary controller, user can only select SATA drives.
W
O
R
SATA Hot Plug SFF (2.5-inch) Midline (MDL) Drives
HP 1TB 6G SATA 7.2K rpm SFF (2.5-inch) SC Midline 1yr Warranty Hard Drive
HP 500GB 6G SATA 7.2K rpm SFF (2.5-inch) SC Midline 1yr Warranty Hard Drive
HP 1TB 6G SATA 7.2K rpm SFF (2.5-inch) SC 512e 1yr Warranty Hard Drive
HP 2TB 6G SATA 7.2K rpm SFF (2.5-inch) SC 512e 1yr Warranty Hard Drive
NOTE: User may select any combination of SAS or SATA Hard Drives.
SAS drives require the selection of a SAS controller. See card lists in
Controllers section.
If B140i is the primary controller, user can only select SATA drives.
SO
LO
N
ET
SATA Hot Plug LFF (3.5-inch) Midline (MDL) Drives
HP 6TB 6G SATA 7.2K rpm LFF (3.5-inch) SC Midline 1yr Warranty Hard Drive
HP 4TB 6G SATA 7.2k rpm LFF (3.5-inch) SC Midline 1yr Warranty Hard Drive
HP 3TB 6G SATA 7.2K rpm LFF (3.5-inch) SC Midline 1yr Warranty Hard Drive
HP 2TB 6G SATA 7.2K rpm LFF (3.5-inch) SC Midline 1yr Warranty Hard Drive
HP 1TB 6G SATA 7.2K rpm LFF (3.5-inch) SC Midline 1yr Warranty Hard Drive
HP 500GB 6G SATA 7.2K rpm LFF (3.5-inch) SC Midline 1yr Warranty Hard Drive
HP 4TB 6G SATA 7.2K rpm LFF (3.5-inch) SC Midline 512e 1yr Warranty Hard
Drive
HP 6TB 6G SATA 7.2K rpm LFF (3.5-inch) SC Midline 512e 1yr Warranty Hard
Drive
HP 6TB 6G SATA 7.2K rpm LFF (3.5-inch) SC 512e Performance 1yr Warranty
Hard Drive
HP 4TB 6G SATA 7.2K rpm LFF (3.5-inch) SC 512e Performance 1yr Warranty
Hard Drives
HP 6TB 6G SATA 7.2K rpm LFF (3.5-inch) SC 512e Helium 1yr Warranty Hard
Drive
HP 8TB 6G SATA 7.2K rpm LFF (3.5-inch) SC 512e Helium 1yr Warranty Hard
Drive
NOTE: User may select any combination of SAS or SATA Hard Drives.
If B140i is the primary controller, user can only select SATA drives. SAS drives
require the selection of a SAS controller. See card lists in Controllers section.
655710-B21
655708-B21
765453-B21
765455-B21
753874-B21
693687-B21
628061-B21
658079-B21
657750-B21
658071-B21
765253-B21
765255-B21
793667-B21
793665-B21
793683-B21
793695-B21
6G SATA SC Hot Plug LFF 7.2K (3.5-inch) Standard Drives
HPE 1TB 6G SATA 7.2K rpm LFF (3.5in) SC Standard 1yr Warranty Hard Drive
858594-B21
HPE 2TB 6G SATA 7.2K rpm LFF (3.5in) SC Standard 1yr Warranty Hard Drive
858596-B21
6G SATA Hot Plug SFF Value Endurance (2.5-inch) Enterprise Value M1 Solid State Drives
SOLO NETWORK (11) 4062-6971 (21) 4062-6971 (31) 4062-6971 (41) 4062-6971 (48) 4062-6971 (51) 4062-6971 (61) 4062-6971
764923-B21
816899-B21
816889-B21
816995-B21
816985-B21
816975-B21
1 Gigabit Ethernet adapters
HP Ethernet 1Gb 4-port 331T Adapter
HP Ethernet 1Gb 2-port 361T Adapter
HP Ethernet 1Gb 2-port 332T Adapter
10 Gigabit Ethernet adapters
HP Ethernet 10Gb 2-port 560SFP+ Adapter
HP Ethernet 10Gb 2-port 557SFP+ Adapter
HP Ethernet 10Gb 2-port 530T Adapter
HP Ethernet 10Gb 2-port 530SFP Adapter
HP Ethernet 10Gb 2-port 561T Adapter
NOTE: Max=1 if selected with another x8 device.
HPE Entry-Level Power Supplies
HPE ML30 Gen9 350W E-star 1.0 FIO Power Supply Kit
NOTE: Max=1
NOTE: The HPE ML30 Gen9 350W E-star 1.0 FIO Power Supply Kit supports
Bronze-level efficiency (no less than 82%) at all load
SO
HPE Power
Supplies
LO
N
HPE Networking
ET
W
O
R
K
HP 120GB 6G SATA Value Endurance SFF 2.5-in SC Enterprise Value 3yr Wty M1
Solid State Drive
6G SATA Hot Plug MU-3 SFF (2.5-inch) SC Solid State Drives
HP 480GB 6G SATA Read Intensive-3 SFF 2.5-in SC 3yr Wty Solid State Drive
HP 240GB 6G SATA Read Intensive-3 SFF 2.5-in SC 3yr Wty Solid State Drive
6G SATA Hot Plug LFF (3.5-inch) MU-3 SCC SSD
HP 960GB 6G SATA Mixed Use-3 SFF 2.5-in SC 3yr Wty Solid State Drive
HP 480GB 6G SATA Mixed Use-3 SFF 2.5-in SC 3yr Wty Solid State Drive
HP 240GB 6G SATA Mixed Use-3 SFF 2.5-in SC 3yr Wty Solid State Drive
Hard Drive Kits
HPE ML30 Gen9 8 Small Form Factor Hot Plug Hard Drive Cage Kit
HPE ML30 Gen9 4 Large Form Factor Hot Plug Hard Drive Cage Kit
HP Large Form Factor Hard Drive Blank Kit
HP Small Form Factor Hard Drive Blank Kit
HP ML10v2 Drive Enablement Kit
NOTE: Compatible with all chassis and supports NHP LFF Hard Disk. If ATX
PSU is installed, system support up to 2x. If RPS is installed, system support
up to 1x.
822756-B21
822608-B21
666986-B21
666987-B21
812248-B21
647594-B21
652497-B21
615732-B21
665249-B21
788995-B21
656596-B21
652503-B21
716591-B21
820303-B21
HPE ML30 Gen9 350W E-star 2.0 Power Supply Kit
NOTE: Max=1
NOTE: The HPE ML30 Gen9 350W E-star 2.0 Power Supply Kit supports
Silver-level efficiency (no less than 85%) at all load
822384-B21
HP 460W CS Gold Ht Plg Power Supply Kit
NOTE: Must select 4U RPS Enablement Kit.
Max=2
Customer can select:
503296-B21
SOLO NETWORK (11) 4062-6971 (21) 4062-6971 (31) 4062-6971 (41) 4062-6971 (48) 4062-6971 (51) 4062-6971 (61) 4062-6971
460W Hot Plug Power Supply x1 + 4U RPS Enablement Kit x1
460W Hot Plug Power Supply x2 + 4U RPS Enablement Kit x1
HPE ML30 Gen9 4U Redundant Power Supply Enablement Kit
NOTE: Required for 460W Hot Plug Power Supply.
Max=1
822607-B21
HPE Computation HP NVIDIA Quadro K2200 Graphics Accelerator
and Graphics
NOTE: A x16 device cannot be selected together with GPU.
Accelerators
K
R
HPE ML30 Gen9 Front PCI Redundant Fan Kit
820290-B21
SO
LO
N
ET
W
O
HPE Cooling
Options
J0G89A
SOLO NETWORK (11) 4062-6971 (21) 4062-6971 (31) 4062-6971 (41) 4062-6971 (48) 4062-6971 (51) 4062-6971 (61) 4062-6971
HPE iLO Advanced
HPE iLO Advanced including 3yr 24x7 Technical Support and Updates E-LTU
HPE iLO Advanced including 1yr 24x7 Technical Support and Updates 1-server
LTU
HPE iLO Advanced including 3yr 24x7 Tech Support and Updates 1-server LTU
HPE iLO Advanced including 3yr 24x7 Tech Support and Updates Flexible
Quantity LTU
HPE iLO Advanced including 3yr 24x7 Tech Support and Updates Tracking LTU
HPE iLO Advanced including 1yr 24x7 Technical Support and Updates E-LTU
HPE iLO Essentials
HPE iLO Essentials including 3yr 24x7 Tech Support and Updates 1-server LTU
HPE iLO Essentials including 1yr 24x7 Tech Support and Updates 1-server LTU
HPE iLO Essentials including 3yr 24x7 Technical Support and Updates E-LTU
HPE iLO Essentials including 1yr 24x7 Technical Support and Updates E-LTU
NOTE: For additional license kits, including electronic delivery options, please
see the HPE Integrated Lights-Out (iLO) QuickSpecs.
NOTE: For more information, visit: http://www.hp.com/go/ilo.
SO
LO
N
Embedded
Management
ET
W
O
R
K
NOTE: Some options may not be integrated at the factory. To ensure only valid configurations are ordered, Hewlett Packard
Enterprise recommends the use of an HPE approved configurator. Contact your local sales representative for additional
information.
HPE Insight
HPE Insight Control
Software
HPE Insight Control including 1yr 24x7 TSU E-LTU
C6N28ABE
HPE Insight Control including 1yr 24x7 Technical Support and Updates 1-server
C6N27A
LTU
HPE Insight Management Media Kit
C6N31A
HPE Insight Control including 1yr 24x7 Support ProLiant ML/DL/BL-bundle Single
C6N36A
Server FIO LTU
HPE Insight Control including 1yr 24x7 Support ProLiant ML/DL/BL-bundle FIO EC6N36ABE
LTU
NOTE: Electronic and Flexible-Quantity licenses can be used to purchase multiple licenses with a single
activation key.
NOTE: Customer will receive a license entitlement certificate. The license entitlement certificate must
be redeemed online or via fax in order to obtain the license activation key(s). Includes one year of 24 x 7
HPE Software Technical Support and Update Service.
NOTE: Licenses ship without media. The HPE Insight Control Media Kit can be ordered separately, or
can be downloaded at: http://www.hp.com/go/insightupdates.
NOTE: For additional license options please see the HPE Insight Control QuickSpecs.
HPE Security
HP Trusted Platform Module 2.0 Kit
NOTE: HPE Trusted Platform Module 2.0 Option works with Gen9 servers
with UEFI Mode not Legacy Mode. It is not compatible with HPE ProLiant
Gen8 servers or earlier generation variants.
NOTE: HPE Gen9 servers purchased earlier may need the latest firmware
update to be compatible with the TPM 2.0 Option.
E6U64ABE
512485-B21
BD505A
BD506A
BD507A
E6U59ABE
BD774A
BD775A
E6U61ABE
E6U62ABE
745823-B21
SOLO NETWORK (11) 4062-6971 (21) 4062-6971 (31) 4062-6971 (41) 4062-6971 (48) 4062-6971 (51) 4062-6971 (61) 4062-6971
NOTE: HPE server systems can have a TPM module (of any type) installed
only once. It cannot be replaced with any other TPM module.
SAS Controllers
HP Smart Array P440/2GB FBWC 12Gb 1-port Int SAS Controller
NOTE: Device Count - This controller can support up to 8 internal SAS/SATA
devices
Must select P440/P840 Cable Kit x1
Max=1
Must select Megacell battery x1 + battery holder kit x1 if no other P-series
controllers are selected.
HP Smart Array P440/4GB FBWC 12Gb 1-port Int SAS Controller
NOTE: Device Count - This controller can support up to 8 internal SAS/SATA
devices
Must select P440/P840 Cable Kit x1
Must select Megacell battery x1 + battery holder kit x1 if no other P-series
controllers are selected.
Max=1
HP Smart Array P441/4GB FBWC 12Gb 2-ports Ext SAS Controller
NOTE: Must select Megacell battery x1 + battery holder kit x1 if no other Pseries controllers are selected.
Max=1
HP ML110 Gen9 Mini SAS P440/P840 Cable Kit
NOTE: 1pcs required per P440/4G or P440/2G controller.
SAS Controller Options
HP 96W Smart Storage Battery with 145mm Cable for DL/ML/SL Servers
NOTE: Max=1.
820834-B21
R
K
HPE Storage
Controllers
N
ET
W
O
726821-B21
SO
LO
Battery Holder
HP ML150 Gen9 Smart Storage Battery Holder Kit
NOTE: Max=1.
HPE Smart Host Bus Adapters
HP H240 12Gb 2-ports Int Smart Host Bus Adapter
NOTE: Device Count - This controller can support up to 8 internal SAS/SATA
devices
1pc required per H240 controller for HPE 4LFF Mod-X
2pcs required per H240 controller for 8SFF Mod-X
Max=1
HP H241 12Gb 2-ports Ext Smart Host Bus Adapter
NOTE: Max=1
HP ML110 Gen9 Mini SAS H240 Cable Kit
NOTE: 1pc required per H240 controller for HPE 4LFF Mod-X.
NOTE: 2pcs required per H240 controller for 8SFF Mod-X.
726825-B21
789651-B21
727258-B21
786710-B21
726907-B21
726911-B21
789648-B21
HPE Tape Backup NOTE: For the complete range of tape drives, autoloaders, libraries and media
see: http://www.hp.com/go/tape. For hardware and software compatibility of HPE tape backup
products see: http://www.hp.com/storage/SPOCK and http://www.hp.com/go/ebs.
SOLO NETWORK (11) 4062-6971 (21) 4062-6971 (31) 4062-6971 (41) 4062-6971 (48) 4062-6971 (51) 4062-6971 (61) 4062-6971
SO
LO
N
ET
W
O
R
K
NOTE: Must select SAS controller to support internal SAS tape drives.
NOTE: Tape drive and HDD total amount can't exceed SAS controller support qty.
NOTE: Limited to H240 when select Tape Drive.
Tape Drives
HPE StoreEver LTO-7 Ultrium 15000 External Tape Drive
BB874A
HPE StoreEver LTO-6 Ultrium 6650 SAS External Tape Drive
EH964A
HPE StoreEver LTO-6 Ultrium 6650 SAS Internal Tape Drive
EH963A
HPE StoreEver LTO-6 Ultrium 6250 External Tape Drive
EH970A
HPE StoreEver LTO-6 Ultrium 6250 Internal Tape Drive
EH969A
HPE StoreEver LTO-5 Ultrium 3280 SAS External Tape Drive
EH900B
HPE StoreEver LTO-5 Ultrium 3000 SAS External Tape Drive
EH958B
HPE StoreEver LTO-4 Ultrium 1760 SAS External Tape Drive
EH920B
HPE StoreEver LTO-3 Ultrium 920 SAS External Tape Drive
EH848B
HPE StoreEver Mini-SAS High Density to 4-lane Mini-SAS External Fanout 2m
K2R09A
Cable
HPE StoreEver Mini-SAS High Density to 4-lane Mini-SAS External Fanout 4m
K2R10A
Cable
HPE ML30 Gen9 Tape Drive Cable Kit
851615-B21
NOTE: Required per RDX/LTO internal disk backup system if selected
together with 350W ES1.0 or ES2.0 power supply.
NOTE: HPE ML30 Gen9 server requires HPE ML30 Gen9 Tape Drive Cable Kit (851615-B21) for internal
tape drive support.
SAS Rack-Mount Tape Solutions
HPE StoreEver 1U SAS Rack Mount Kit
AE459B
HPE StoreEver LTO-6 Ultrium 6250 Tape Drive in a 1U Rack Mount Kit
C0L99A
HPE StoreEver LTO-4 Ultrium 1760 SAS (1) in a 1U Rack Mount Kit
EH946C
HPE StoreEver LTO-5 Ultrium 3000 SAS Tape Drive in a 1U Rack Mount Kit
EJ014B
HPE MSL2024 Tape Library
HPE StoreEver MSL2024 0-drive Tape Library
AK379A
HPE MSL4048 Tape Library
HPE StoreEver MSL4048 0-drive Tape Library
AK381A
HPE 1/8 G2 Tape Autoloader
HPE StoreEver 1/8 G2 LTO-6 Ultrium 6250 Fibre Channel Tape Autoloader
C0H19A
HPE StoreEver MSL6480
HPE StoreEver MSL6480 Scalable Base Module
QU625A
HPE StoreEver MSL6480 Scaleable Expansion Module
QU626A
HPE Disk Backup HPE RDX Removable Disk Backup System
HP RDX1000 USB3.0 Internal Disk Backup System
B7B67A
HP RDX500 USB3.0 Internal Disk Backup System
B7B64A
HP RDX USB 3.0 Internal Docking Station
C8S06A
HP D3700 Enclosure
QW967A
HP D3600 Enclosure
QW968A
HP RDX 2TB USB3.0 Internal Disk Backup System
E7X52A
NOTE: HPE ML30 Gen9 server requires HPE ML30 Gen9 Tape Drive Cable Kit (851615-B21) for internal
tape drive support.
SOLO NETWORK (11) 4062-6971 (21) 4062-6971 (31) 4062-6971 (41) 4062-6971 (48) 4062-6971 (51) 4062-6971 (61) 4062-6971
HPE StoreOnce Backup systems
HPE StoreOnce 5100 48TB System
HP StoreOnce 4700 24TB Backup
HP StoreOnce 4500 24TB Backup
HPE StoreOnce 3540 24TB System
HPE StoreOnce 3520 12TB System
HPE StoreOnce 3100 8TB System
K
BB915A
BB879A
BB878A
BB914A
BB922A
BB913A
QQ695A
Installation & Start-up Services
HPE Installation ML/DL Series 10 Service
HPE Startup ML/DL Series 10 Service
Foundation Care
HPE 3 year Foundation Care Next business day ML30 Gen9 Service
HPE 3 year Foundation Care Next business day with DMR ML30 Gen9 Service
HPE 3 year Foundation Care 24x7 ML30 Gen9 Service
HPE 3 year Foundation Care 24x7 with DMR ML30 Gen9 Service
HPE 3 year Foundation Care Next business day with CDMR ML30 Gen9 Service
HPE 3 year Foundation Care 24x7 with CDMR ML30 Gen9 Service
Proactive Care
HPE 3 year Proactive Care 24x7 ML30 Gen9 Service
HPE 3 year Proactive Care 24x7 with DMR ML30 Gen9 Service
SO
HPE Support
Services
HPE Enterprise Mainstream Flash Media Kits for Memory Cards
HP 8GB microSD Enterprise Mainstream Flash Media Kit
HP 32GB microSD Enterprise Mainstream Flash Media Kit
HP 8GB USB Enterprise Mainstream Flash Media Drive Key Kit
HP Dual 8GB microSD Enterprise Midline USB Kit
LO
HPE USB and SD
Options
N
ET
W
O
R
HPE Disk Storage Disk Enclosures
Systems
HP D6000 Dual I/O Module Disk Enclosure
NOTE: See the HPE D6000 Disk Enclosure QuickSpecs for additional
information including configuration steps and additional options needed for a
complete solution.
HP D6000 w/35 4TB 6G SAS 7.2K LFF Dual Port MDL HDD 140TB Bundle
HP D6000 w/70 4TB 6G SAS 7.2K LFF Dual Port MDL HDD 280TB Bundle
HP D6000 w/35 2TB 6G SAS 7.2K LFF Dual port MDL HDD 70TB Bundle
HP D6000 w/70 2TB 6G SAS 7.2K LFF Dual port MDL HDD 140TB Bundle
HP D6000 w/35 3TB 6G SAS 7.2K LFF Dual port MDL HDD 105TB Bundle
HP D6000 w/70 3TB 6G SAS 7.2K LFF Dual port MDL HDD 210TB Bundle
HP D2600 w/12 4TB 6G SAS 7.2K LFF Dual Port MDL HDD 48TB Bundle
HP D6000 w/70 6TB 12G SAS 7.2K LFF (3.5in) Dual Port MDL HDD 420TB
Bundle
HP D6000 w/35 8TB 12G SAS 7.2K LFF (3.5in) Dual Port MDL HDD 280TB Bundle
HP D6000 w/70 8TB 12G SAS 7.2K LFF (3.5in) Dual Port MDL HDD 560TB
Bundle
E7W30A
E7W31A
QQ697A
QQ698A
QQ699A
QQ700A
E7W32A
M0T57A
M0T58A
M0T59A
726116-B21
700139-B21
737953-B21
741279-B21
U7WZ5E
U7WZ7E
H1AS0E
H1AS1E
H1AS6E
H1AS7E
H1AX4E
H1AX7E
H1AS8E
H1AS9E
SOLO NETWORK (11) 4062-6971 (21) 4062-6971 (31) 4062-6971 (41) 4062-6971 (48) 4062-6971 (51) 4062-6971 (61) 4062-6971
H1AX8E
SO
LO
N
ET
W
O
R
K
HPE 3 year Proactive Care 24x7 with CDMR ML30 Gen9 Service
NOTE: For a full list of available support services, please
visit https://ssc.hpe.com/portal/site/ssc/
SOLO NETWORK (11) 4062-6971 (21) 4062-6971 (31) 4062-6971 (41) 4062-6971 (48) 4062-6971 (51) 4062-6971 (61) 4062-6971
NOTE: Memory configurations listed do not apply to "Factory Integrated Models".
HPE Standard Memory
HPE Standard Memory is unique technology which is designed to work on 10/100 series Rack and Tower server. In Gen9 Server HPE
Standard Memory has passed HPE's rigorous qualification and test processes. HPE Standard Memory is a certified HPE options and will
provide a platform to allow future memory-related support enhancements through HPE Active Health System, System Insight
Management and Insight Control management software.
K
DDR4 memory population guidelines
For detailed memory configuration rules and guidelines, please use the Online DDR4 Memory Configuration
Tool: http://www.hp.com/go/ddr4memory-configurator.
ET
W
O
R
Memory
Population
guidelines
SO
LO
N
General Memory Population Rules and Guidelines:
. The HPE ProLiant ML30 Gen9 Server has four memory slots
. There are two channels per server with two DIMM slots per channel
. Memory channel 1 consists of the two (2) DIMMs that are closest to the processor
. Memory channel 2 consists of the two (2) DIMMs that are furthest from the processor
. Support for single/dual-rank 2133 MT/s ECC UDIMM (unbuffered DIMMS)
. The server supports up to 64 GB (4 x 16-GB) for Unbuffered DIMMs
. No support for LRDIMMs; RDIMMs; Non-ECC UDIMMs
. Do not install DIMMs if the processor is not installed
. Populate DIMMs from heaviest load (double-rank) to lightest load (single-rank)
. Non-ECC DIMMs are not supported
. Always use HPE qualified DIMMs
Intel Gen9 Supported Memory Bandwidth for HPE ProLiant Gen9 Intel® Xeon® E3-1200v5 Series Processor Family
Memory Bandwidth and Capacity
[DIMM Type]
Unbuffered with ECC DIMMs (UDIMMs)
HPE SKU P/N
DIMM Rank
805667-B21
Single Rank
819880-B21
Single Rank
805669-B21
Dual Rank
805671-B21
Dual Rank
DIMM Capacity
4GB
8GB
8GB
16GB
SOLO NETWORK (11) 4062-6971 (21) 4062-6971 (31) 4062-6971 (41) 4062-6971 (48) 4062-6971 (51) 4062-6971 (61) 4062-6971
Std Voltage 1.2V
2133
Std Voltage 1.2V
2133
Std Voltage 1.2V
2133
4
4
4
32
32
POPULATED DIMM SPEED (MT/s)
1 DIMM Per Channel
2133
2133
2 DIMM Per Channel
2133
2133
2133
2133
2133
ET
Standard memory replaced with optional memory (1 CPU model)
• Population order; start with "A" first, "B" second, "C" third, etc.
• Population order; start with "A" first, "B" second, "C" third, etc.
• When two processors are installed, install DIMMs in sequential alphabetic order: CPU1-A, CPU2A,CPU1-B,CPU2-B,CPU1-C, CP2-C
N
DIMM slot and
configuration
diagram
64
W
3 DIMM Per Channel
2133
O
16
R
MAXIMUM CAPACITY (GB)
K
Voltage
Std Voltage 1.2V
DIMM Native Speed
2133
(MT/s)
SLOTS THAT CAN BE POPULATED
4 slot servers
4
Slot # population order
1
2
1
2
C
A
LO
Chnl 1
CPU 1
Slot # population order
CPU 1
Slot # population order
Slot # population order
3
4
3
4
SO
Chnl 2
CPU 2
D
B
CPU 2
Memory Speed by Processor Models
Processor Model G4400, G4500, i3-6300, i3-6100, E3-1220v5, E31230v5, E3-1240Lv5, E3-1240v5, E3-1270v5
Standard and
Pre Configured Models
Maximum Memory
Capacity (Preconfigured
E3-1220v5
Models)
E3-1240v5
Standard Memory
4GB (1x4GB)
8GB (1x8GB)
Supported Memory Speeds
2133MT/s
Maximum Memory Plus Standard Memory
Optional Memory
Replaced with Optional
Memory
52GB (3x16GB, 1x4GB)
64GB (4x16GB)
56GB (3x16GB, 1x8GB)
64GB (4x16GB)
SOLO NETWORK (11) 4062-6971 (21) 4062-6971 (31) 4062-6971 (41) 4062-6971 (48) 4062-6971 (51) 4062-6971 (61) 4062-6971
DDR4 memory options part number decoder
NOTE: Capacity references are rounded to the common gigabyte (GB) values.
R
K
2GB = 2,048MB
4GB = 4,096MB
8GB = 8,192MB
16GB = 16,384MB
32GB = 32,768MB
64GB = 65,536MB
SO
LO
N
ET
W
O
•
•
•
•
•
•
SOLO NETWORK (11) 4062-6971 (21) 4062-6971 (31) 4062-6971 (41) 4062-6971 (48) 4062-6971 (51) 4062-6971 (61) 4062-6971
1-4
4 x LFF SATA/SSD Non-hot-plug Hard Drive Bays
4-bay LFF hot-plug drive model
1-4
4 x LFF SAS/SSD Hot Pluggable Hard Drive Bays
SO
LO
N
ET
W
O
R
K
4-Bay LFF non-hot-plug drive model
8-bay SFF hot-plug drive model
1x8
8 x SFF SATA/SSD Hot Pluggable Hard Drive
Bays
W
O
R
K
SOLO NETWORK (11) 4062-6971 (21) 4062-6971 (31) 4062-6971 (41) 4062-6971 (48) 4062-6971 (51) 4062-6971 (61) 4062-6971
SO
LO
N
ET
Maximum Storage Capacity Total (4 LFF Drive)
32TB
Total (8 SFF Drive)
16TB
SOLO NETWORK (11) 4062-6971 (21) 4062-6971 (31) 4062-6971 (41) 4062-6971 (48) 4062-6971 (51) 4062-6971 (61) 4062-6971
Tower
Dimensions
Tower Weight
14.50(H) x 6.89(W) x 18.7(D) in (36.82 x 17.5 x 47.52 cm)
Input
Requirements
100 to 120 VAC
47 to 63 Hz
Maximum
Rated SteadyState Power
R
412W to 526W at 115 V AC input
412W to 523W at 230 V AC input
460W - 1773 BTU / hr (at 120 VAC), 1715 (at 240 VAC)
350 W (at 115 VAC)
350 W (at 230 VAC)
Maximum Peak
350 W (at 115 VAC)
Power
350 W (at 230 VAC)
Standard
10° to 35°C (50° to 95°F) at sea level with an altitude derating
Operating Support of 1.0°C per every 304.8 m (1.8°F per every 1000 ft) above sea
level to a maximum of 3048 m (10,000 ft), no direct sustained
sunlight. Maximum rate of change is 10°C/hr (18°F/hr). The
upper limit may be limited by the type and number of options
installed. System performance may be reduced if operating
with a fan fault or above 30°C (86°F).
Non-operating
-30° to 60°C (-22° to 140°F). Maximum rate of change is
20°C/hr (36°F/hr).
Operating
10 to 90% relative humidity (Rh), 28°C (82.4°F) maximum wet
bulb temperature.
Non-operating
5 to 95% relative humidity (Rh), 38.7°C (101.7°F) maximum wet
bulb temperature, noncondensing.
Operating
3048 m (10,000 ft). This value may be limited by the type and
number of options installed. Maximum allowable altitude change
rate is 457 m/min (1500 ft/min).
Non-operating
9144 m (30,000 ft). Maximum allowable altitude change rate is
457 m/min (1500 ft/min).
Listed are the declared A-Weighted sound power levels (LWAd) and declared
average bystander position A-Weighted sound pressure levels (LpAm) when the
product is operating in a 23°C ambient environment. Noise emissions were
measured in accordance with ISO 7779 (ECMA 74) and declared in accordance with
ISO 9296 (ECMA 109).
Idle
L WAd
4.2 Bels (1P LFF Base)
3.7 Bels (1P LFF Performance)
L pAm
27 dBA (1P LFF Base)
23 dBA (1P LFF Performance)
Operating
L WAd
4.2 Bels (1P LFF Base)
N
LO
Relative
Humidity
SO
Altitude
Acoustic Noise
K
2.5 to 6 Amps
ET
System Inlet
Temperature
27.1lb(13.56kg)
30.8lb(15.4kg)
O
BTU Rating
Power Supply
Output
Minimum:
Maximum:
Range Line
Voltage
Rated Input
Current
Rated Input
Frequency
Rated Input
Power
W
System Unit
SOLO NETWORK (11) 4062-6971 (21) 4062-6971 (31) 4062-6971 (41) 4062-6971 (48) 4062-6971 (51) 4062-6971 (61) 4062-6971
W
O
Emissions
Classification
R
K
3.8 Bels (1P LFF Performance)
L pAm
27 dBA (1P LFF Base)
23 dBA (1P LFF Performance)
NOTE: Configurations tested for 1P LFF Base models include one (1) 1TB LFF
SATA Midline HDD and Windows 2012 Enterprise 64-bit.
NOTE: Configurations tested for 1P LFF Performance models include one (1)
1TB LFF SATA Midline HDD and Windows 2012 Enterprise 64-bit.
NOTE: The Listed sound levels apply to standard shipping configurations.
Additional options may result in increased sound levels.
NOTE: Levels presented do not account for non-Hewlett Packard Enterprise
installed hardware.
FCC Rating
Class B
Normative
CISPR 22; EN55022; EN55024; FCC CFR 47, Pt 15; ICES-003;
CNS13438; GB9254; K22;K24; EN 61000-3-2; EN 61000-3-3; EN
Standards
60950-1; IEC 60950-1
NOTE: Product conformance to cited product specifications is based on sample
(type) testing, evaluation, or assessment. This product or family of products is
eligible to bear the appropriate compliance logos and statements.
SO
LO
N
ET
HPE Dynamic
Number of PCI Four
Smart Array
links
B140i Controller PCI link rate
4 Gb/s
Storage protocol SATA
support
SAS/SATA peak 6 Gb/s
data transfer
rate
Number of
10 links
SAS/SATA links
SAS/SATA
2x4 connectors; 2x1 connectors
connectivity
Expander
No
support
Drives
Up to 10 Internal Drives
supported (max)
RAID support
0, 1, 10, 5 SATA
Software
HPE SSA, SMH, SIM
management
Warranty
Server warranty
HPE Secure
Not Supported
Encryption
license
HPE SmartCache Not Supported
License
SOLO NETWORK (11) 4062-6971 (21) 4062-6971 (31) 4062-6971 (41) 4062-6971 (48) 4062-6971 (51) 4062-6971 (61) 4062-6971
K
IEEE 802.3 10Base-T
IEEE 802.3ab 1000Base-T
IEEE 802.3u 100Base-TX
PCI Express, two lanes (x2)
BCM5720
10Base-T (HalfDuplex)
10 Mb/s per port, 40 Mb/s combined
10Base-T (FullDuplex)
20 Mb/s per port, 80 Mb/s combined
100Base-TX (HalfDuplex)
100 Mb/s per port, 400 Mb/s combined
100Base-TX (FullDuplex)
200 Mb/s per port, 800 Mb/s combined
1000Base-TX
(Half-Duplex)
1000Mb/s per port, 4000 Mb/s combined
1000Base-TX
(Full-Duplex)
2000Mb/s per port, 8000 Mb/s combined
RJ-45
10 Base-T
Categories 3, 4 or 5 UTP; up to 328 ft (100 m)
10/100/1000 Base-TX Category 5 or higher UTP; up to 328 ft (100 m)
N
LO
Connector
Cable Support
ET
W
Data Transfer
Method
Controller
Network
Transfer Rate
10Base-T/100Base-TX/1000Base-TX
R
HPE Ethernet 1Gb Network
2-port 332i
Interface
Adapter
Compatibility
Supported
O
HPE Smart
Storage
Administrator
SO
EnvironmentEnd-of-life
friendly Products Management and
and Approach
Recycling
Hewlett-Packard offers end-of-life Hewlett Packard Enterprise product return,
trade-in, and recycling programs in many geographic areas. For trade-in
information, please go to: http://www.hp.com/go/green. To recycle your
product, please go to: http://www.hp.com/go/green or contact your
nearest Hewlett Packard Enterprise sales office. Products returned to Hewlett
Packard Enterprise will be recycled, recovered or disposed of in a responsible
manner.
The EU WEEE directive (2002/95/EC) requires manufacturers to provide treatment
information for each product type for use by treatment facilities. This information
(product disassembly instructions) is posted on the Hewlett Packard Enterprise
web site at: http://www.hp.com/go/green. These instructions may be used by
recyclers and other WEEE treatment facilities as well as Hewlett Packard Enterprise
OEM customers who integrate and re-sell Hewlett Packard Enterprise equipment.
SOLO NETWORK (11) 4062-6971 (21) 4062-6971 (31) 4062-6971 (41) 4062-6971 (48) 4062-6971 (51) 4062-6971 (61) 4062-6971
6-Jun-2016
From Version 5 to 6
Added
8-Apr-2016
31-Mar-2016
From Version 4 to 5
From Version 3 to 4
Changed
Added
Changed
Removed
From Version 2 to 3
Added
Changed
W
16-Feb-2016
Removed
From Version 1 to 2
Added
Changed
LO
N
ET
17-Dec-2015
Description of Change
Smart Buy models section was revised for the NA
version only.
Added new HDD offering to the HPE Drives
section.
HPE Processors section was revised.
Added new HPE TMP 2.0 module, and new RDX
Disk Backup Systems.
Embedded Management, Security, Service and
Support, and Pre-configured Models sections were
revised.
Obsolete SKUs were removed from the
QuickSpecs.
New HDD offering was added to HPE Drives.
HPE Unique Options and HPE Tape Backup were
revised.
Obsolete SKUs were removed from the
QuickSpecs.
Smart Buy models were added to the NA version.
Chipset, Pre-Configure Models, HPE Drives, HPE
Power Supplies, HPE Tape Backup, Maximum
Storage Capacity, and Technical Specifications
were revised.
K
Action
Changed
R
Version History
From Version 6 to 7
O
Date
8-Jul-2016
SO
Sign up for updates
© Copyright 2016 Hewlett Packard Enterprise Development LP. The information contained herein is subject
to change without notice. The only warranties for Hewlett Packard Enterprise products and services are set
forth in the express warranty statements accompanying such products and services. Nothing herein should
be construed as constituting an additional warranty. Hewlett Packard Enterprise shall not be liable for
technical or editorial errors or omissions contained herein.
Intel® and Xeon® are registered trademarks of Intel Corporation in the U.S. and other countries.
Microsoft®, Windows®, and Windows Server® are U.S. registered trademarks of the Microsoft group of
companies.
For hard drives, 1GB = 1 billion bytes. Actual formatted capacity is less
c04834991 - 15475 - Worldwide - V7 - 8-July-2016
Download PDF
Similar pages