TORQUE TOOLS
TORQUE TOOLS
CALIBRATION SYSTEMS
MULTITEST CALIBRATION SYSTEMS
The MULTITEST Torque, Force and Tension Calibration System is
the most sophisticated system available in the industry. This system will test
and calibrate most types of torque wrenches, torque screwdrivers, torque
multipliers, cable tensiometers, tension and compression gauges and nonimpact power tools such as nutrunners and electric screwdrivers.
The Multitest Calibration System can be ordered several ways. Each
system begins with the same three basic components: the Multitest
Digital Monitor, the Roller Cabinet and the 2000 ft. lb. Mechanical Loader.
We offer three different systems, the “Premier”, the “Supreme” and the
“Basic”. These systems and their components are described in detail on the
next few pages.
In addition, you may order any component separately to build your own
“custom” system.
Features
• Automatic sensor recognition with “smart” transducers
• Range: 5 in. oz. to 2000 ft. lb. torque (bi-directional)
• Accuracy: ± 0.25% of indicated value, cw & ccw,
from 10% to 100% of full scale, (except 2000-4-02*)
• Built-in, low profile serial printer
• Date and time stamp for stored values
• Statistical analysis performed on stored data
• Stores up to 3000 torque values
• Programmable manual or automatic options for clear,
store and print functions
• 110 or 220 Volts selectable. Foreign plugs are included
• Recall and review of stored torque values
• Track, peak, first peak, power tool modes
• RS232C port, analog output
• Eight torque measurement units:
in. oz., in. lb., ft. lb., Nm, dNm, cNm, mkg and cmkg
• Six force units: ounce, pound, newton, deciNewton,
kilopound (kilogram) and gram
• Automatic lock-up for transducer protection
• All transducers supplied with certification
• Individually serialized with matching certificate
of calibration traceable to N.I.S.T.
2
Multitest Digital Monitor with Soft Touch Keys.
TORQUE TOOLS
CALIBRATION SYSTEMS
MULTITEST PREMIER CALIBRATION SYSTEM
CDI’s All Inclusive Calibration System Model 2000-1
Grainger Part # 5PVG3
Features
• Our most comprehensive calibration system for torque and force
• Calibrate torque wrenches up to 2000 ft. lbs.
• Check the accuracy and calibrate cable tensiometers, tension and compression
gauges
• Includes the easy-to-use 4-in-1 transducer kit
• Eleven single transducers ranging from 5 in. oz. up to 2000 ft. lbs.
• Includes torque screwdriver testing kit
• Automatic safety feature locks system to prevent overloading and possible
damage to transducers
• Displays eight units of torque and six units of force
• Also includes a calibration stand and all necessary calibration wheels, arms,
weights and trays
• Downloading software included
MODEL 2000-1 INCLUDES:
Product Code
Description Grainger Part#
Product Code
Description 2000-610-02
2000-600-02
MULTITEST Monitor
38A861
2000-550-02
Extension Arm Kit for Long Torque Wrenches
38A853
Mechanical Loader 2000 ft. lb. capacity
38A859
2000-750-02
Torque Screwdriver Testing Kit
38A865
2000-100-02
Roller Cabinet
38A286
2000-320-0
No. 1 Weight Set
38A351
2000-400-02
4 in 1 Transducer Kit, 4 in. lbs. to 250 ft. lbs.
38A323
2500-50-0
2-1/2” Calibration Wheel
38A317
2000-500-02
4 In 1 Transducer Adapter Kit
38A322
2000-151-0
5” Calibration Wheel
38A796
2000-4-02*
Transducer Range From 5 - 50 in. ozs. (*± 0.5%)
38A344
2000-152-0
10” Butterfly Wheel
38A795
2000-5-02A
Transducer Range From 15 - 200 in. ozs.
38A339
2000-154-0
40” Calibration Arm
38A325
2000-6-02
Transducer Range From 4 - 50 in. lbs.
38A343
390-2-2
4 oz. Weight Hanger
38A324
2000-65-02
Transducer Range From 15 - 150 in. lbs.
38A338
2000-301
8 oz. Weight Hanger
38A328
2000-7-02
Transducer Range From 30 - 400 in. lbs.
38A342
2000-304-0
7.5 lb. Weight Hanger
38A327
2000-8-02
Transducer Range From 80 - 1000 in. lbs.
38A346
2000-302-0
15 lb. Weight Hanger
38A316
2000-10-02
Transducer Range From 10 - 125 ft. lbs.
38A337
2000-303-0
50 lb. Weight Hanger
38A326
2000-11-02
Transducer Range From 20 - 250 ft. lbs. 38A341
2000-250-02
Calibration Stand Kit
38A333
2000-12-02
Transducer Range From 60 - 600 ft. lbs.
38A345
2000-260-0
Tension Meter 38A856
2000-13-02
Transducer Range From 100 - 1000 ft. lbs.
38A336
2000-261-0
Force Gauge
38A857
2000-14-02
Transducer Range From 200 - 2000 ft. lbs.
38A340
2000-262-0
Compression Gauge
38A855
900-0-1KIT
Joint Rate Simulator 50 in. lbs. capacity
4YVT5
2000-263-02
Force Arm Kit
38A854
900-2-01KIT
Joint Rate Simulator 400 in. lbs. capacity
38A321
2000-SW
PC Software
38A350
900-3-01KIT
Joint Rate Simulator 1000 in. lbs. capacity
38A320
2000-50-1
Cable from MULTITEST to PC
38A331
4 in 1 Transducer Kit with Mounting Adapter
Grainger Part#
3
TORQUE TOOLS
CALIBRATION SYSTEMS
MULTITEST SUPREME CALIBRATION SYSTEM
CDI’s Torque-Only System Model 2000-2. Listed below are all of the
components to CDI’s “Supreme” MULTITEST Torque Calibration System.
This is our mid-range system for torque, which has a range from 15 in. ozs.
to 2000 ft. lbs. Designed for the user who requires precision accuracy and
reliability in a torque calibration system. This set includes an extension arm
for long torque wrenches and 3 joint rate simulators for testing power tools.
(Not for use with impact and pulse tools.) PC compatible software and
cables are also included.
MODEL 2000-2 GRAINGER PART # 5PVG4
INCLUDES:
Product Code
Description
Grainger Part#
2000-610-02
Multitest Digital Monitor
38A861
2000-600-02
Mechanical Loader Max 2000 ft.lb.
38A859
2000-100-02
Roller / Storage Cabinet 45” W x 24” D x 33” H 38A286
2000-400-02
4 in 1 Transducer Kit-Range 4 in. lb. to 250 ft. lb.
38A323
2000-500-02
4 in 1 Transducer Adapter Kit
38A322
2000-4-02
Transducer Kit-Range 5-50 in. oz.
38A344
2000-5-02A
Transducer Kit-Range 15-200 in. oz.
38A339
2000-12-02
Transducer Kit-Range 60-600 ft. lb.
38A345
2000-13-02
Transducer Kit-Range 100-1000 ft. lb.
38A336
2000-14-02
Transducer Kit-Range 200-2000 ft. lb.
38A340
2000-550-02
Extension Arm for Long Torque Wrench, Reach up to 80” 38A853
900-0-1KIT
1⁄4” drive, 50 in. lb. Capacity Joint Rate Simulator
4YVT5
900-2-01KIT
3⁄8” drive, 400 in. lb. Capacity Joint Rate Simulator
38A321
900-3-01KIT
3⁄8” drive, 1000 in. lb. Capacity Joint Rate Simulator
38A320
2000-SW
Wedgelink Software
38A350
2000-50-1
Cable from MULTITEST or SURETEST to PC
38A331
MULTITEST BASIC CALIBRATION SYSTEM
Listed below are all of the components to CDI’s “Basic” MULTITEST
Calibration System Model 2000-3. The system includes the 4 in 1 transducer,
which is capable of calibrating torque tools from 4 in. lbs. through 250 ft. lbs.
Also included is the 2000 ft. lb. loader and the MULTITEST monitor.
MODEL 2000-3 GRAINGER PART # 22N915
INCLUDES:
4
Product Code
Description
2000-610-02
Multitest Digital Monitor
Grainger Part#
38A861
2000-600-02
Mechanical Loader Max 2000 ft.lb.
38A859
2000-100-02
Roller / Storage Cabinet 45” W x 24” D x 33” H 38A286
2000-400-02
4 in 1 Transducer Kit-Range 4 in. lb. to 250 ft. lb.
38A323
2000-500-02
4 in 1 Transducer Adapter Kit
38A322
4 in 1 Transducer Kit with Mounting Adapter.
TORQUE TOOLS
CALIBRATION SYSTEMS
MULTITEST MOTORIZED SYSTEM
MODEL 2800-1 GRAINGER PART # 22N916
CDI has taken torque calibration to a higher level. Increase your productivity with
the 2000 ft. lb. fully automatic motorized loader. Designed for the high volume
calibration laboratory that requires a high-speed, automatic torque calibration
system. In the automatic mode, the MULTITEST Motorized System Model
2800-1 will cycle, test and calibrate most torque wrenches. With our optional
kits, you can calibrate torque screwdrivers, cable tensiometers, tension and
compression gauges utilizing the manual mode, (hand crank only).
The MULTITEST Motorized System consists of the Monitor, Motorized Loader,
Roller Cabinet and Extension Arm. Please order the transducers separately based
on your individual needs. (Not for use with impact and pulse tools.)
• Automatic sensor recognition with “smart” transducers
• Range: 5 in. oz. to 2000 ft. lb. torque (bi-directional)
• Accuracy: ± 0.25% of indicated value, CW & CCW, from 10% to 100% of full scale
• Dual mode function (manual & automatic)
• Automatic speed control
• Built-in, low profile serial printer
• Date and time stamp for stored values
• Statistical analysis performed on stored data
• Emergency stop button
• Programmable manual or automatic options for clear, store and print functions
• Recall and review of stored torque values
• Track, peak, first peak, power tool modes
• RS232C port, analog output
• Eight torque measurement units: in. oz., in. lb., ft.
lb., Nm, dNm, cNm, mkg and cmkg
• Six force units: ounce, pound, newton, deciNewton, kilopound and gram
• Automatic lock-up for transducer protection
• All transducers are individually serialized with matching
certificate of calibration traceable to N.I.S.T.
Dual Mode Function Manual and Automatic
5
TORQUE TOOLS
CALIBRATION SYSTEMS
SURETEST PREMIER CALIBRATION SYSTEM
The SURETEST Model 5000-1 is a laboratory grade instrument which captures
torque measurements with a user friendly interface. It features a large LCD graphical
display. It may be used with a single transducer or can be used as the principal
component of a Torque Calibration System.
The SURETEST features versatile data acquisition capabilities including measurement
storage, retrieval, statistical analysis and automatic downloading to an external printer/
computer. The SURETEST stores, recalls and downloads up to 3000 torque readings.
The system provides readings with an accuracy of ± .25% of indicated value and
features multiple languages: English, Spanish, French, Japanese and German.
The SURETEST Torque Calibration System may be ordered in three different
combinations. The “Premier”, the “Supreme” and the “Basic” systems are described
on these pages. In addition, you may order any component separately to build your
own “custom” system.
Features
• Large LCD graphical display
• Five built-in languages
• Date and time stamp
• Dual RS-232 ports, analog output
• SPC built-in
• Automatic downloading
• Accuracy: ± 0.25% of indicated value, CW & CCW,
from 10% to 100% of full scale
• Transducers available from 5 in. ozs. to 2000 ft. lbs. of torque
• All transducers are “smart” (plug and play)
• Readout in eight different engineering units
• Stores and recalls 5000 torque values (date & time)
• Fully automatic voltage input adaptation (100 - 240 VAC input)
• Data is saved when SURETEST is turned off
• All transducers are individually serialized with
matching certificate of calibration traceable to N.I.S.T.
MODEL 5000-1 GRAINGER PART # 5PVG5
INCLUDES:
6
Set-up is quick and easy utilizing soft touch keys.
Easy, quick change transducers.
Product Code
Description
38A863
2000-320-0
Weight Set #1
38A351
38A859
2500-50-021⁄2” Calibration Wheel
38A317
Roller / Storage Cabinet 45” W x 24” D x 33” H 38A286
2000-151-0
5” Calibration Wheel
38A796
4 in 1 Transducer Kit-Range 4 in. lb. to 250 ft. lb.
38A323
2000-152-0
10” Butterfly Calibration Wheel
38A795
2000-500-02
4 in 1 Transducer Adapter Kit
38A322
2000-154-0
40” Calibration Arm
38A325
2000-4-02
Transducer Kit-Range 5-50 in. oz.
38A344
390-2-2
4 oz. Hanger Calibration Weight Tray
38A324
2000-5-02A
Transducer Kit-Range 15-200 in. oz.
38A339
2000-301
8 oz. Hanger Calibration Weight Tray 38A328
2000-12-02
Transducer Kit-Range 60-600 ft. lb.
38A345
2000-304-0
7.5 lb. Calibration Weight Tray
38A327
2000-13-02
Transducer Kit-Range 100-1000 ft. lb.
38A336
2000-302-0
15 lb. Calibration Weight Tray
38A316
2000-14-02
Transducer Kit-Range 200-2000 ft. lb.
38A340
2000-303-0
50 lb. Calibration Weight Tray
38A326
2000-550-02
Extension Arm for Long Torque Wrench, Reach up to 80” 38A853
2000-250-02
Calibration Stand Kit
38A333
900-0-1KIT
1
⁄4” drive, 50 in. lb. Capacity Joint Rate Simulator
4YVT5
2000-SW
Wedgelink Software
38A350
2000-50-1
Cable from MULTITEST or SURETEST to PC 38A331
Product Code
Description
5000-ST
Suretest Monitor w/Cable and Case
2000-600-02
Mechanical Loader Max 2000 ft.lb.
2000-100-02
2000-400-02
Grainger Part #
900-2-01KIT
3
⁄8” drive, 400 in. lb. Capacity Joint Rate Simulator
38A321
900-3-01KIT
3
⁄8” drive, 1000 in. lb. Capacity Joint Rate Simulator
38A320
2000-750-02
Torque Screwdriver Testing Kit for 2000-600-02 Loader
38A865
Grainger Part #
TORQUE TOOLS
CALIBRATION SYSTEMS
SURETEST SUPREME CALIBRATION SYSTEM
CDI’s Mid-Range Torque System Model 5000-2. Listed below are
all of the components to CDI’s “Supreme” SURETEST Torque Calibration
System. This mid-range torque system has a range from 5 in. ozs. to 2000 ft.
lbs. Choose SURETEST for unsurpassed accuracy and reliability in a torque
calibration system. Also includes an extension arm for long torque wrenches
and 3 joint rate simulators for testing power tools. (Not for use with impact
and pulse tools.) PC compatible software and cables are included.
MODEL 5000-2 GRAINGER PART # 5PVG6
INCLUDES:
Product Code
Description
5000-ST
Suretest Monitor w/Cable and Case
Grainger Part #
38A863
2000-600-02
Mechanical Loader Max 2000 ft.lb.
38A859
2000-100-02
Roller / Storage Cabinet 45” W x 24” D x 33” H 38A286
2000-400-02
4 in 1 Transducer Kit-Range 4 in. lb. to 250 ft. lb.
38A323
2000-500-02
4 in 1 Transducer Adapter Kit
38A322
2000-4-02
Transducer Kit-Range 5-50 in. oz.
38A344
2000-5-02A
Transducer Kit-Range 15-200 in. oz.
38A339
2000-12-02
Transducer Kit-Range 60-600 ft. lb.
38A345
2000-13-02
Transducer Kit-Range 100-1000 ft. lb.
38A336
2000-14-02
Transducer Kit-Range 200-2000 ft. lb.
38A340
2000-550-02
Extension Arm for Long Torque Wrench, Reach up to 80” 38A853
900-0-1KIT
1
900-2-01KIT
3
900-3-01KIT
⁄4” drive, 50 in. lb. Capacity Joint Rate Simulator
4YVT5
⁄8” drive, 400 in. lb. Capacity Joint Rate Simulator
38A321
3
⁄8” drive, 1000 in. lb. Capacity Joint Rate Simulator
38A320
2000-SW
Wedgelink Software
38A350
2000-50-1
Cable from MULTITEST or SURETEST to PC
38A331
Set-up is quick and easy utilizing soft touch keys
4 in 1 Transducer Slides Easily into Adapter Kit
Telescoping Arm extends to accommodate
600 ft. lbs. wrenches
Quick Release Pins make changing transducers
a snap
7
TORQUE TOOLS
CALIBRATION SYSTEMS
SURETEST TM BASIC CALIBRATION SYSTEM
The SURETEST Model 5000-3 is a laboratory grade instrument which
captures torque measurements with a user friendly interface. It features a
large LCD graphical display. It may be used with a single transducer or can
be used as the principal component of a Torque Calibration System.
The SURETEST features versatile data acquisition capabilities including
measurement storage, retrieval, statistical analysis and automatic
downloading to an external printer/computer. The SURETEST stores, recalls
and downloads up to 3000 torque readings. The system provides readings
with an accuracy of +/- .25% of indicated value and features multiple
languages: English, Spanish, French, Japanese and German.
Features
• Large LCD graphical display
• Five built-in languages
• Date and time stamp
• Dual RS-232 ports, analog output
• SPC built-in
• Automatic downloading
• Accuracy is +/- 0.25% of indicated value, CW & CCW, from
10% to 100% of full scale
• Transducers available from 5 in. ozs. to 2000 ft. lbs. of torque
• All transducers are “Smart” (Plug and Play)
• Readout in eight different engineering units
• Stores and recalls 3000 torque values (Date & Time)
• Fully automatic voltage input adaptation (100 - 240 VAC input)
• Data is saved when SURETEST is turned off
• All transducers supplied with certification
• All transducers are individually serialized with
matching certificate of calibration traceable to N.I.S.T.
MODEL 5000-3 GRAINGER PART # 5PVG7
INCLUDES:
Product Code
Description
5000-ST
Suretest Monitor w/Cable and Case
Grainger Part #
38A863
600TL-2
Mechanical Loader 600 ft. lb.
38A858
2000-400-02
4 in 1 Transducer Kit-Range 4 in. lb. to 250 ft. lb.
38A323
2000-500-02
4 in 1 Transducer Adapter Kit
38A322
2000-12-02
Transducer Kit-Range 60-600 ft. lb.
38A345
CUSTOM CALIBRATION SYSTEMS
Don’t see the exact system you’re looking for? Please call customer service to
request a quotation on a custom calibration system. We will provide assistance
designing a testing system to fit your application and specifications.
8
4 in 1 Transducer Kit with Mounting Adapter.
TORQUE TOOLS
CALIBRATION ACCESSORIES
TEST/CALIBRATION ACCESSORIES
CDI’s calibration equipment is expressly designed to calibrate the
complete line of CDI Torque Transducers. All weight trays, arms and brackets
supplied by CDI Torque Products are built with precision accuracy to meet
the demanding needs of the calibration professional. All calibration wheels
and arms are certified as to length, and supplied with a certificate of accuracy,
which is traceable to N.I.S.T. (National Institute of Standards and Technology).
Weights, trays and hangers are weight certified and are also supplied with
a certificate of accuracy traceable to N.I.S.T. Mass Classification is Class F.
Mating adapters are available to facilitate the use of the various components.
Written procedures are available upon request for calibrating any of CDI’s
manufactured torque products.
TEST/CALIBRATION ACCESSORIES
Product Code
2000-750-02
Description
Grainger Part #
Torque Screwdriver Testing Kit for 2000-600-02 Loader 38A865
2000-750-06
Torque Screwdriver Testing Kit for 600TL Loader
38A866
2000-320-0
Weight Set #1 - For all Transducers
38A351
2000-321-0
Weight Set #2 - For 200 in. oz. to 600 ft. lbs.
38A352
2000-322-0
Weight Set #3 - For 600 ft. lb. to 2000 ft. lbs.
38A353
390-2-2
4 oz. Hanger Calibration Weight Tray
38A324
2000-301
8 oz. Hanger Calibration Weight Tray 38A328
2000-302-0
15 lb. Calibration Weight Tray
38A316
2000-303-0
50 lb. Calibration Weight Tray
38A326
2000-304-0
7.5 lb. Calibration Weight Tray
38A327
Calibration Stand Kit
38A333
2500-50-021⁄2” Calibration Wheel
38A317
2000-151-0
5” Calibration Wheel
38A796
2000-152-0
10” Butterfly Calibration Wheel
38A795
2000-154-0
40” Calibration Arm
38A325
⁄2” x 3⁄8” Calibration Arm Adapter
38A313
2000-250-02
2000-152-3
1
2000-226-3
3
⁄4” x 1⁄2” Sq. Drive Reducer
38A319
2000-226-2
1” x ⁄4” Calibration Arm Adapter
38A312
2000-154-81 1⁄4” x 3⁄4” Calibration Arm Adapter
38A315
S/2000-221-01 1⁄4” x 3⁄4” Adapter for 40” Arm
38A314
3
342-35
Transducer Mounting Bracket up to 1000 in. lb. (TB342/1) 38A347
342-36
Transducer Mounting Bracket 125-600 ft. lb. (TB342/2)
38A348
2000-150-03
Transducer Bracket, 1000-2000 ft.lb.
38A335
343-25
Transducer Mounting Bracket 4 in 1 ETT (TB343)
38A349
9
TORQUE TOOLS
TESTER
DIGITAL TORQUE TESTERTM (DTT)
TEST THE HEALTH OF YOUR TORQUE WRENCHES - ANYWHERE
WITH THE DIGITAL TORQUE TESTER.
Utilizing the testing protocol and standards developed by the American
Society of Mechanical Engineers (ASME)
The Digital Torque TesterTM (DTT) is designed to be an affordable torque
tester that can be mounted on a wall or used in a bench-top vise to allow
the operator to conveniently test torque wrenches and torque screwdrivers.
It features an easy to use touch pad screen to capture peak torque values
during a test in real time, and download stored torque data to a PC. All DTT
torque testers are sold in a kit with the complete tester, hard carrying case, a
socket driver reducer adapter and AC/DC power supply.
DIGITAL TORQUE TESTERTM (DTT)
Product Code
Grainger Part #
Female Drive
Range English
Range, Nm
Range, kgcm
1001-O-DTT
4YWR7
1/4”
10 - 100 in.oz.
.07 - .706
.72 - 7.20
1001-I-DTT
30HM04
1/4”
10 - 100 in.lb.
.07 - .706
.72 - 7.20
501-I-DTT
5PVG8
1/4”
5 - 50 in.lb.
.56 - 5.65
5.76 - 57.60
8001-0-DTT*
46E688
1/4”
20 - 800 in.oz.
.001 - .056 cNm .014 - .56 dNm
2502-I-DTT 4YWR8
3/8”
25 - 250 in.lb.
2.82 - 28.25
23.80 - 288.0
4002-I-DTT
22N914
3/8”
40 - 400 in.lb.
4.52 - 45.2
46.08 - 460.8
10002-I-DTT
5PVG9
3/8”
100 - 1000 in.lb.
12 - 112
115 - 1152
2503-F-DTT 4YWR9
1/2”
25 - 250 ft.lb.
33 - 338.96
1.93 - 34.56 kgm
6004-F-DTT
4YWT1
3/4”
60 - 600 ft.lb.
81.35 - 813.5
8.30 - 82.95 kgm
Accuracy:
*Accuracy:
Units of Measure:
Operation Modes:
Operating Temperature:
Storage Temperature:
Humidity:
Power Supply:
Data Storage/Recall:
Dimensions:
Weight:
± 0.50% 10% to 100% CW & CCW of indicated test value @ 25º C (Except 2503-F-DTT)
± 1% CW & CCW from 2-1/2% to 100% of full scale. New for Torque Screwdriver.
Nm, kgcm, ft.lb., in.lb., in.oz., kgm, cNm
TRACK, PEAK, FIRST PEAK
10 to 32º C (50 to 90º F)
-20 to 50º C (-2 to 122º F)
85% Relative Humidity @ 21º C (70º F)
Included 9-volt A/C D/C adapter. 6 AA batteries included.
Memory Capacity – 500 Records (Complete Check Mode Only.)
W - 10” x H - 16” x D - 2.5”
(Tester Only) - 10.7 lbs., (with Carrying Case) - 17.4 lbs.
DTT OPTIONAL ACCESSORIES
Product Code
10
Description Grainger Part #
2344-0050-03
Table Mounting Bracket for DTT Series Testers
38A864
2344-0051-02
Male SQ Adapter 3/8” x 3/8”
46E692
2344-0051-11
1/4” to 1/4” adapter
46E690
2344-0051-13
1/2” to 1/2” adapter
46E689
2344-0051-16
3/8” to 1/2” adapter
46E691
2344-0051-19
Male Square Adp 3/4” x 1-1/4”
30HL86
TORQUE TOOLS
TESTER
DIGITAL TORQUE TESTERTM (DTT) QUICK CHECK MODE
Features
• Integral Transducer and sturdy housing allow mounting in virtually
any position
• Integral Transducer: Full bridge strain gage, 350 ohm, 1500uE,
3mV/V F.S, 3.75 excitation.
• Units of Torque: Nm, kgcm, ft.lb., in.lb., in-oz.
• Audible (tone) and LED light-bar Present Alerts
• Torque Accuracy: ±0.5% ±1 count CW and CCW from 10 to
100% of full scale at 25° C
• LCD Touch Screen: 4.7 in. color graphics display
• Screen resolution: 480 X 272 pixels
• Display Accuracy: 4 digits, 9999 cycle counts
• Six “AA” Alkaline cells for battery power included
• Track, Peak and First Peak modes of operation
• Operating Temperature: 40 to 110° F (5 to 42° C)
• Storage Temperature: 0 to 122° F (-20 to 50° C)
• Humidity up to 85% non-condensing
• EU/CE-DE, ES, FR, IT, NL, PT, UK and Japanese language manual
• Certificate of N.I.S.T. traceability from 10% to 100% of full scale
• Includes storage case, AC adapter and USB cable
DIGITAL TORQUE TESTERTM (DTT) AUDIT MODE
The Audit mode is an ASME emulation which tests the wrench at 20%, 60% and 100% of full scale. This provides a
complete diagnostic analysis of the wrench. Testing validates the linearity of the wrench.
Select Audit (ASME emulation)
Example shows testing a 250 ft.lb. wrench at
20% of full scale.
Yellow indicates low reading.
Select Wrench Type
Example shows testing a 250 ft.lb. wrench at
60% of full scale.
Yellow indicates low reading.
Example shows testing a 250 ft.lb. wrench at
100% of full scale.
Red indicates high reading.
11
TORQUE TOOLS
TESTER
MULTITORQ TORQUE & DATA COLLECTION SYSTEMS
The MULTITORQ portable electronic torque meter displays torque
readings from sensors that attach between sockets and driver. MULTITORQ
is a highly versatile torque analyzer/data acquisition system that can be
used with sockets, extensions, universal joints, ratcheting drivers or any
combination of these. Sensors are sold separately, available in 8 ranges from
2-20 in. ozs. to 150-1500 ft. lb. Accuracy ± 1% of reading (± 2% reading for 20
in. oz., and 10 in. lb.) 10-100% of sensor range.
The torque analyzer features a wide angle viewing LCD display with selectable
readouts; ft. lb., in. lb., in. oz., Nm, dNm, mkg, and cmkg units. Torque target
settings are entered via a push button membrane keyboard. High and low
torque limits are adjustable to give an audible and visual alarm. The user
selects Track mode to display torque values as they are applied, or Peak mode
to display the highest torque value applied.
Features
• 4 digit w/ alpha & numerical function flags
• 4 digit, 8000 counts display capacity
• Accuracy: ± 1% of indicated value, cw & ccw, from 10% to 100% of full scale, 201-O-MT and 101-I-MT are ± 2%
• Soft touch keys: hi/lo alarm, zero tare, set-up, units, store/recall/clear, send, statistics, enter
• Units of measurement: ft. lb., in. lb., in. oz., Nm, dNm, mkg and cmkg
• Storage: -20 to 50 degrees C (-2 to 122 degrees F)
• Humidity: up to 90%, non-condensing
• Dimensions: 3” wide, 2.5” high (3” with belt clip), 6” deep
• Weight: 1 pound
• Charge life (full charge to shutoff): 20 hours continuous
• Battery chargers: 120 VAC or 220 VAC (50-60Hz)
• Output: 9VDC, 200mA
• Data storage/recall: 3500 measurements
• Serial output port: RS-232 (true), 300-19.2k baud, and mitutoyo (statistical protocol)
• Rechargeable Ni-Cad batteries
• Reads bi-directionally (cw and ccw)
Turns any ordinary ratchet wrench.....
MULTITORQ TORQUE & DATA COLLECTION SYSTEMS
Standard Set Includes:
Product Code Grainger Part #Description
1600-MT
4YVT6
MULTITORQ Unit includes: power pack/charger (P115-30) and case (1600-50)
Sensors: (sold separately)
Product Code
Grainger Part #
Torque Range
Drive
201-0-MT
5PVH0
2 - 20 in. oz.
1
101-I-MT
4YVT7
1 - 10 in. lb.
1
501-I-MT
5PVH1 5 - 50 in. lb.
1
2001-I-MT
4YVT8
20 - 200 in. lb.
1
1002-F-MT
4YVT9
10 - 100 ft. lb.
Product Code
⁄4”
1600-10
⁄8”
Description
3
Interface Cable: RS-232 to serial printer 46E687
2503-F-MT
4YVU1
25 - 250 ft. lb.
1
1600-20
⁄2”
Interface Cable: RS-232 to P.C.
6004-F-MT
4YVU2
0 - 600 ft. lb.
3
15005-F-MT
5PVH2 150 - 1500 ft. lb.
1”
Certificate of accuracy traceable to N.I.S.T. supplied with each transducer.
All components ordered separately.
12
...into a highly accurate digital torque tool.
⁄4”
⁄4”
Optional Accessories:
⁄4”
⁄4”
Grainger Part #
4YVU3
TORQUE TOOLS
ELECTRONIC WRENCHES
COMPUTORQ ASG - ADVANCED STEEL GRIP
ELECTRONIC TORQUE WRENCH
The Computorq ASG Electronic Torque Wrenches are truly revolutionary, supplying torque in
less time with more control and accuracy. Available in a wider range of sizes for every industry,
including, 1/4”, 3/8”, 1/2” and 3/4” models. They unite torque and angle in a single mode
to provide the most accurate and fastest way to achieve torque while applying the right angle
tightening sequence. In addition to the LED indicator lights, an audible beep and handle
vibration alert you when target torque is achieved. The rugged all-steel construction is
designed to stand-up to even the toughest work conditions an with an easy-to-use software
solution and highly programmable features.
Features
• Rugged all-steel body is designed to stand-up to industrial use
• Fully programmable for reliable, repeatable torque application
• Torque and Angle combo modes (patent pending)
• Calculates calibration factor automatically
• Backlit LCD screen, LED indicator lights, audible beep
and handle vibration signal when torque is within range
• Time based calibration-needed indicator (patent pending)
• 50 memory presets, sequence programming and job mode
• High storage capacity for 1,500 readings
• USB downloadable, time stamped data trail for quality control
• Industry-leading 2 year warranty
COMPUTORQ ASG -ADVANCED STEEL GRIP
ELECTRONIC TORQUE WRENCHES
Grainger
Product Code
Part #
Length
Wt.
Drive
Ft. Lb.
In. Lb.
Nm
In. (mm)
Lbs. (kgs)
2401CASG
30HL99
⁄4”
1-120
12-240
1.4-27.2
12.5-317.5
1.80
1002CASG
30HM01 3⁄8”
5-100
60-1200
6.8-135.6
18.9 - 480
3.10
2503CASG
30HM02 1⁄2”
12.5-250
150-3000
16.9-339
26.7-678.2
4.50
6004CASG
30HM03 3⁄4”
30-600
360-7200
40.7-813.50 48.6-1234.44 10.48
1
TORQUE COMPARATOR
Large dual scale. Perfect when a quick check of your wrench is required before
usage. Compact design allows for mounting on any flat surface in either horizontal or
vertical position. Torque Comparator is calibrated on torque testers which are certified
using test bars and “F” weights traceable to NIST. +/- 2% accuracy from 20% of full scale
to full scale. Calibration Compliance Certificate.
Product Code
Grainger Part # Square Drive
English Capacity
Inc.
Nm, Capacity Inc.
1753-TC 4YVU4
1
⁄2”
175 ft. lbs. 5 ft. lbs.
230 Nm
10 Nm
6004-TC
22N912
3
⁄4”
600 ft. lbs. 5 ft. lbs.
800 Nm
20 Nm
13
TORQUE TOOLS
ELECTRONIC WRENCHES
COMPUTORQ 3 ELECTRONIC TORQUE WRENCHES
The COMPUTORQ 3 Electronic Torque Wrench is a simple to use digital readout
wrench that displays real time torque values in any of four torque units, ft.lbs., in.lbs.,
Nm, kg.cm. Simply set the desired torque value and apply force until the green LED
illuminates. Great for light industrial, automotive, motorcycle, watercraft and aircraft
applications.
Features
• Sleek new design
• 15-degree flex ratcheting head
• Push button socket release head
• Large, easy to read digital display
• Long battery life, uses 2 each CR123 lithium batteries
• Ergonomically designed molded non-slip rubber grip
• Torques in both clockwise and counterclockwise directions
• Battery saving auto-shutoff after two minutes
• COMPUTORQ 3 remembers last unit and torque setting selected
• Audible tone sounds when set torque value is reached, if the
set torque value is exceeded, an alarm tone will sound.
• 3 color LED light bar
YELLOW LED indicates approaching desired torque setting
GREEN LED indicates desired torque value is reached
RED LED indicates fastener was overtorqued, loosen and retighten.
• When desired torque value is reached, display will
hold value and flash for ten seconds.
• COMPUTORQ 3 will operate in any of four torque units, foot pounds (ft. lbs.),
inch pounds (in. lbs.), newton meter (Nm) or kilogram centimeter (kg. cm.).
• ACCURACY:
±2% CW of readings from 20% to 100% of full scale
±3% CCW of readings from 20% to 100% of full scale
• N.I.S.T. traceable certificate of calibration included
STANDARD MODELS
GraingerLength
Wt.
Product Code
Part #
Drive
Ft. Lb.
In. Lb.
Nm
⁄4”
2.0 - 20.0
24 - 240
2.71 - 27.10 27.6 - 276
⁄8”
10.0 - 100.0
⁄2”
25 - 250
2401CI3
4YVR3
1
1002CF3
4YVR1
3
2503CF3
4YVR4 1
Kg. Cm.
In. (mm)
Lbs. (kgs)
15 (381)
2.0 (.91)
120 - 1200
13.6 - 135.6 138 - 1382 17 (432)
2.2 (1.0)
300 - 3000
33.8 - 338
3.5 (1.59)
345 - 3456 27 (686)
HIGH ACCURACY MODELS
Grainger Length
Wt.
Product Code
Part #
2401CI3HA*
22N917
Drive
1
Ft. Lb.
In. Lb.
Nm
⁄4”
2.0 - 20.0
24 - 240
2.71 - 27.10 27.6 - 276
1002CF3HA*
22N918
3
2503CF3HA*
22N919 1
Kg. Cm.
In. (mm)
Lbs. (kgs)
15 (381)
2.0 (.91)
⁄8”
10.0 - 100.0
⁄2”
25 - 250
120 - 1200
13.6 - 135.6 138 - 1382 17 (432)
2.2 (1.0)
300 - 3000
33.8 - 338
3.5 (1.59)
345 - 3456 27 (686)
COMPUTORQ 3 Display and 3 Color LED Light Bar
The certification of accuracy provided per ASME and ISO Standards is 20% to 100% of full scale.
*HIGH ACCURACY 1% Clockwise direction only.
14
It couldn’t be easier to use!
TORQUE TOOLS
ELECTRONIC WRENCHES
TORQUE & ANGLETM ELECTRONIC TORQUE WRENCHES
The CDI Torque and Angle Electronic Wrench incorporates 21st Century Technology in a simple to use digital wrench. Specifically
designed to meet the needs of the torque professional where torque plus angle is required. It features three units of torque, ft.lbs. In.lbs. and
Nm as well as the angle mode.
The Torque and Angle wrench allows the technician to apply a specific torque load, followed by the angle specification, all in one convenient
wrench. It features a three LED light bar and audible buzzer. As the angle mode is a separate function, the wrench can also be used as a stand
alone digital torque wrench.
Features
• Accuracy is +/- 2% CW, +/- 3% CCW of indicated value
• Gyro chip senses 360° of movement, and is accurate to within
+/- 3.8°
• No maintenance, just change batteries at 80 hours
• VERY easy to set up and use quickly
• Almost impossible to over torque
• Digital torque measurement and digital angle measurement in one
convenient package
• Ergonomic non-slip cushion grip
• 15% Flex Ratchet head
• Long battery life, uses two CR123 lithium batteries
• Convenient, push button socket release ratchet head
• 3 step LED visual signal system:
Yellow Light = approaching target torque
Green Light = target torque reached
Red Light = over torque indicator
• N.I.S.T. traceable certificate of calibration included
TORQUE & ANGLETM ELECTRONIC TORQUE WRENCHES
GraingerLength
Wt.
Product Code
Part #
1002TAA-CDI
4YVR2
Drive
3
Ft. Lb.
In. Lb.
Nm
Angle
In. (mm)
Lbs. (kgs)
⁄8”
10 - 100
120 - 1200
12.6 - 135.6 0-360°
17 (432)
2503TAA-CDI
4YVR5
1
2.2 (1.0)
⁄2”
25 - 250
300 - 3000
33.8 - 338
27 (686)
3.5 (1.59)
0-360°
The certification of accuracy provided per ASME and ISO Standards
is 20% to 100% of full scale.
HEAVY-DUTY TORQUE & ANGLETM TORQUE WRENCH
LEADING THE WAY IN HEAVY-DUTY TORQUE AND ANGLE APPLICATIONS WITH INNOVATIVE SOLUTIONS THAT
MAKE A DIFFERENCE IN DOING THE JOB RIGHT.
The CDI 600 ft.lb. Heavy-Duty Torque & AngleTM Torque Wrench eliminates the need for angle gauges and protractors, providing the
most accurate and efficient way to achieve torque plus angle tightening sequences now specified by many manufacturers. The digital readout
displays a torque setting then with a push of a button, switches to the angle mode. Angle readout not affected by ratcheting. Angle calculation
based on the same gyroscopic technology that maintains helicopters at level flight.
• Torque Accuracy: (2% CW & 3% CCW FROM 20 – 100% F.S.)
(4% CW & 6% CCW FROM 10 – 19% F.S.)
• Angle Accuracy: ± 3.8% of indicated value
• Angular Display Resolution: 1°
Features
• Torque Units: ft.lb., in.lbs., Nm
• Audible (tone) Preset Alerts
• Display Resolution: 0.1 ft.lb., 0.1 Nm, 1 in.lb.
• Comfortable non-slip grip handle
• Sealed Ratchet Head
• 4 “AA” Alkaline Batteries Included
• Low Battery Indicator and Auto Shutoff after two minutes idle
• Operating Temperature: 40 - 110° F. (5 - 42° C)
• Storage Temperature: 0 - 122° F (-20 - 50° C)
• Humidity up to 90% non-condensing
• EU/CE-DE, ES, FR, IT, NL, PT, UK and Japanese language manual
• Certificate of N.I.S.T. traceability for 20% to 100% of full scale
• Includes storage case
HEAVY-DUTY TORQUE & ANGLETM TORQUE WRENCH
Product Code
6004TAA
Grainger
Length
Wt.
Part #
22N913 Drive
Ft. Lb.
In. Lb.
⁄4”
120 - 600
1440 - 7200 156 - 780 0-360°
3
Nm
Angle
In. (mm)
Lbs. (kgs)
49 (1244.6)
14 (6.35)
15
TORQUE TOOLS
SCREWDRIVERS
TORQUE SCREWDRIVERS - MICRO-ADJUSTABLE
Adjustable models offer versatility for applications that require more than one torque
value. These torque screwdrivers are particularly suited for the electronics industry and
for instrument assembly work. A simple, cam-over design prevents over-tightening and
possible damage to components.
Torque settings are easily and accurately changed with a unique adjusting knob and
easy-to-read window scale. Adjusting the screwdriver is simple. Just pull out the
adjusting knob to unlock, turn to the desired setting, then push the knob in until it clicks!
Positive locking knob makes accidental setting changes impossible. Automatic lock in
counterclockwise direction makes fastener removal a snap. The Micro-Adjustable series
includes six models with torque settings ranging from 20 in. ozs. to 40 in. lbs.
Features
• 6 models available
• Positive locking pull down adjustment knob
• Trilobular comfort grip
• Universal 1/4” hex bit holder with strong rare earth magnet
• Cam-over torque limiting clutch
• Slip resistant finish
• Easy-to-read window scale
• Light weight
• Automatic lock in CCW direction for disassembly
• Accuracy: ± 6% of indicated value, CW, from 20% to 100% of full scale
• Individually serialized with matching certificate of calibration traceable to N.I.S.T.
• Meets or exceeds ASME B107.14 - 2004
TORQUE SCREWDRIVERS - MICRO-ADJUSTABLE
Product Code Grainger Part #
Torque Range Increments
Inches
Oz.
61SM
4YVT4
20 - 100 in. ozs. 1 in. oz.
1.1 x 5.5
6.8
151SM
4YVR9 3 - 15 in. lbs.
.2 in. lbs.
1.1 x 6.25
8.0
401SM
4YVT2
5 - 40 in. lbs.
.5 in. lbs.
1.2 x 6.75
10.8
61NSM
38A849
10 - 80 cNm
1 cNm
1.1 x 5.5
6.8
151NSM
38A850 40 - 200 cNm
2 cNm
1.1 x 6.25
8.0
401NSM
38A851 50 - 450 cNm
5 cNm
1.2 x 6.75
10.8
Industry standard 1/4” hex
receiver allows use of all
standard driver bits (Phillips,
Torx, etc.)
Automatic lock in counterclockwise direction makes
screw removal a snap.
16
W x L
Wt.
Cam-over torque limiting
clutch for repeatability
and accuracy
Certified to the following
industry specifications:
ASME B107.14 - 2004
and ISO 6789
Lightweight yet
rugged construction,
built to last
Comfortable, slip resistant finish
Permanently lubricated
internal mechanism,
never needs oil
Easy-to-read window scale
and adjustment knob for
precise settings
TORQUE TOOLS
SCREWDRIVERS
TORQUE SCREWDRIVERS - SINGLE SETTING
The tamper resistant design of the Single Setting series is particularly suited for highvolume use in assembly operations. A simple, cam-over design prevents over-tightening
and possible damage to components.
Torque screwdrivers may be ordered factory pre-set at an additional charge or they may
be easily set by the operator with any quality torque calibration system. The end cap
removes for easy access to the 1/8” hex adjustment screw. A hex adjustment key is
included with each driver.
The Single Setting series includes four models with available torque settings from 6 in.
ozs. up to 40 in.lbs. When precision and repeatability are a must, the choice is simple CDI Torque Screwdrivers.
Features
• Factory Pre-Set models are set at the factory to the customer’s specified torque
setting and are furnished with a Certificate of Calibration
• Please specify desired torque setting when order is placed
• 4 models available
• Trilobular comfort grip
• Universal 1/4” hex bit holder with strong rare earth magnet
• Cam-over torque limiting clutch
• Rugged, light weight aluminum body
• Automatic lock in CCW direction
• Accuracy: ± 6% of indicated value, CW, from 20% to 100% of full scale
• Meets or exceeds ASME B107.14 - 2004
TORQUE SCREWDRIVERS - SINGLE SETTING
Product Code
Grainger Product Code
Un-Set
Part #
Factory Pre-Set
Grainger Part #
Torque Range
W X L Length Wt. Oz.
21SP
38A85221SP-SET
38A846
6-32 in.ozs
1.1 x 4.5
5.3
61SP
38A84861SP-SET
38A845
10 - 100 in.ozs.
1.1 x 5.6
7.0
151SP
4YVT1151SP-SET
38A844
1.5 - 15 in. lbs
1.1 x 5.6
7.0
401SP
4YVT3401SP-SET
38A843
4 - 40 in. lbs.
1.2 x 6.3
9.6
TORQUE LIMITING T-HANDLE - PRE-SET
TLPT4NM
Pre Set Value
Product Code Grainger Part #
Nm
Ft. Lb.
In. Lb.
Bit
TLPT4NM
22N920
4.0
2.9
35.4
4 mm
TLPT5NM
22N921
5.0
3.7
44.3
4 mm
TLPT6NM
22N922
6.0
4.4
53.1
4 mm
Features
• Torque Limiting Technology to Prevent Over-Tightening
• Magnetic Shank to Interchange Bits as Needed
• Rounded T-Handle Grip for Added Comfort
• Hi-Vis Color for Easy Identification
• Shaft accepts 1/4” hex shank bits, a 4 mm bit is included in each driver
TLPT5NM
TLPT6NM
17
TORQUE TOOLS
SCREWDRIVERS/TORKYS
TORKY - SINGLE SETTING WRENCHES
CDI’s TORKY is a right angle pre-set torque wrench. Torky is designed
for production torque applications that require higher values than a torque
screwdriver can deliver. The comfortable design eases the strain of repeated
uses. Torque value may be ordered factory pre-set at an additional charge or
it may be easily set by the operator with any quality torque calibration system.
When the proper torque value is reached, a momentary release or “break” can
be felt. Available in three drive styles to fit most needs.
Features
• Factory Pre-Set models are set at the factory to the customer’s specified torque
setting and are furnished with a Certificate of Calibration
• Please specify desired torque setting when order is placed
• Three models available
• Simple, easy to use design
• Ruggedly built for years of reliable service
• Operates bi-directionally
• Accuracy: ± 6% of indicated value, CW, from 20% to 100% of full scale
TORKY - SINGLE SETTING WRENCHES
Product Code
Grainger Product Code
Grainger WXL
Wt.
Un-Set
Part #
Factory Pre-Set
Part #Drive
Torque Range Length
Oz.
1501TPA-1
4YVR61501TPA-1-SET
38A847
1/4” Female Hex
20-170 in.lbs. 1 x 5.25
8.3
1501TP-1
4YVR71501TP-1-SET
38A810
1/4” Male Square
20-170 in.lbs. 1 x 5.25
8.3
1502TP-1
4YVR81502TP-1-SET
38A839
3/8” Male Square
20-170 in.lbs. 1 x 5.25
8.3
Prevents premature wear of carbide inserts and
damage to cutter head due to improper clamp load.
18
TORQUE TOOLS
ELECTRONIC DIAL WRENCH
ELECTRONIC DIAL TORQUE WRENCH
The new Electronic Dial (ED) torque wrench features solid-state electronics for accurate
torque application and measurement. ED’s design provides easy set-up and usage. There is
no need to look directly at the digital readout as the wrench features 3 indicating lights and
an audible buzzer.
The ED wrench has unsurpassed reliability and durability -- 21st century technology in a
simple, easy to read digital torque wrench.
Features
• 4 units of measure...ft lb, in lb, Nm, kg.cm.
• Accuracy: ± 1% of indicated value CW & CCW, from 20% to 100% of full scale
• 3 step LED visual signal system
YELLOW LIGHT = approaching target torque
GREEN LIGHT = target torque reached
RED LIGHT = over torque indicator
• Audible tone when desired torque is reached
• Alarm tone sounds if wrench is overtorqued
• Ergonomically designed wrench body
• Display can be turned 180 degrees to allow left hand usage
• Battery cover designed to be aviation FOD proof
• Holds “peak” torque reading for 10 seconds
• Constructed of special Capron® material for long life and durability
• Resistant to the majority of chemicals used in industrial environments
• Wrench can be hung on tool board
• Bar graph displays orientation of torque application (left or right hand)
• Uses standard 9 volt alkaline battery
• N.I.S.T. traceable certificate of calibration included
• Meets or exceeds ASME B107.28 – 2005
ELECTRONIC DIAL TORQUE WRENCH
GraingerLength
Wt.
Product Code
Part #
Drive
In. Lb. Ft. Lb.
Nm
Kg. Cm.
In. (mm)
Lbs. (kgs) 501ED-CDI
4YVP3 1
⁄4”
5 - 50
.42 - 4.17
.56 - 5.65
57 - 57.61
11.5 (292)
1.25 (.57)
2502ED-CDI
3
4YVP2 ⁄8”
25 - 250
2.08 - 20.83
2.82 - 28.25 28 - 280.03 14.5 (368) 1.51 (.68)
6002ED-CDI
4YVP4
⁄8”
60 - 600
5 - 50
6.79 - 67.79 69 - 691.27 14.5 (368) 1.51 (.68) 3
CDI “ED”: Easy to change dial
orientation.
The yellow LED illuminates within
10% of target torque.
The green LED illuminates within 4%
of target torque. Continuous buzzer
sounds when target is reached.
The red LED illuminates 4% beyond
target torque, indicating fastener was
overtorqued. Rapid “alarm” buzzer
sounds.
19
TORQUE TOOLS
MECHANICAL WRENCHES
DIAL TORQUE WRENCHES - SINGLE SCALE
Dial Torque Wrenches are designed for the automotive, nuclear and
industrial markets in addition to military installations throughout the world.
This series features sturdy torsion beam design for dependable long life and
accuracy. The small frame model offers working ranges from 3 in. lbs. to 50
ft. lbs. in 1/4” and 3/8” drives. The large frame model continues from 100
ft. lbs. through 2,000 ft. lbs. with 1/2”, 3/4” and 1” drives. Accuracy of both
series of ± 3% meets or exceeds B107.14 - 2004, ISO 6789 bi-directionally
from 20% to 100% of scale. All wrenches supplied with a N.I.S.T. traceable
certificate of calibration.
Features
• Sturdy body construction insures maximum durability
• Easy to read laser marked single scale
• Large easy to read dial is shock resistant and protected by a tough
metal guard
• Memory needle retains highest torque reading applied
• Calibrated in both CW and CCW direction
• Accuracy: ± 3% of indicated value, CW & CCW, from 20% to 100% of
full scale
• Individually serialized with matching certificate of calibration traceable
to N.I.S.T.
T-TYPE DIAL WRENCHES must be operated by two
persons or a torque multiplier. The handle is over 10 ft.long.
DIAL TORQUE WRENCHES - SINGLE SCALE
Grainger
Drive English
Product Code
Part #
Size (In.)
Range Incr.In.In.In. In.
A
B
C
D
WT.
Lbs.
⁄4” 0-30 in.lb.
.5 in.lb.
11.5
1.1
1.2
2.75
1.1
⁄4” 0-75 in.lb.
1 in.lb.
11.5
1.1
1.2
2.75
1.1
⁄8” 0-75 in.lb.
1 in.lb.
11.5
1.1
1.2
2.75
1.1
⁄8” 0-300 in.lb. 5 in.lb.
11.5
1.1
1.2
2.75
1.1
⁄8” 0-600 in.lb. 10 in.lb. 15
1.5
1.2
2.75
1.6
⁄8” 0-50 ft.lbs.
15
1.5
1.2
2.75
1.6
⁄2” 0-100 ft. lb. 2 ft. lb
21.75
2.25
1.50
2.75
3.70
⁄2” 0-175 ft. lb. 5 ft. lb.
21.75
2.25
1.50
2.75
3.70
⁄2” 0-250 ft. lb. 5 ft. lb
21.75
2.25
1.50
2.75
3.70
⁄4” 0-350 ft. lb. 10 ft. lb. 28.00
2.25
1.50
2.75
5.75
Memory Needle Models
301LDINSS
38A262
1
751LDINSS
38A264
1
752LDINSS
38A283
3
3002LDINSS
38A278
3
6002LDINSS
38A281
3
502LDFNSS
38A280
3
1003LDFNSS 38A257
1
1753LDFNSS
38A258
1
2503LDFNSS
38A259
1
3504LDFNSS
38A270
3
6004LDFNSS*
38A271
3
⁄4” 0-600 ft. lb. 10 ft. lb. 47.00
2.50
1.50
2.75
10.10
10005LDFNSS*
38A249
1” 0-1000 ft. lb. 20 ft. lb. 74.00
2.50
3.50
3.00
30.00
6004LDFESS**
38A272
3
⁄4” 0-600 ft. lb. 10 ft. lb. 47.00
2.50
1.50
2.75
10.10
10005LDFESS**
38A250
1” 0-1000 ft. lb. 20 ft. lb. 74.00 2.50
3.50
3.00
30.00
20005LDFESS***
38A251
1” 0-2000 ft. lb. 40 ft. lb. 122.00 3.50
6.50
3.50
47.00
1 ft.lb.
Electric Signaling Models
***NOTE: 6004LDFNSS and 10005LDFNSS include 1 extension handle.
***NOTE: 6004LDFESS and 10005LDFESS include 1 extension handle, indicating light and buzzer.
***NOTE: 20005LDFESS is a “T” style wrench with 1” drive female head that can be used with a torque
multiplier. Includes 5 piece handle assembly, indicating light and buzzer.
20
TORQUE TOOLS
MECHANICAL WRENCHES
DIAL TORQUE WRENCHES NEWTON METER - SINGLE SCALE
DIAL TORQUE WRENCHES NEWTON METER - SINGLE SCALE
Product Code
Grainger
Part #
Drive Nm
Size (In.)
Range Incr.In.In.In.In.
Lbs.
A
B
C
D Wt.
⁄4”
0-1.8 Nm
.05 Nm 11.5
1.1
1.2
2.75 1.1
⁄4” 0-3.5 Nm
.1 Nm
11.5
1.1
1.2
2.75 1.1
⁄4” 0-9 Nm
.2 Nm
11.5
1.1
1.2
2.75 1.1
⁄8” 0-9 Nm
.2 Nm
11.5
1.1
1.2
2.75 1.1
⁄8” 0-18 Nm
.5 Nm
11.5
1.1
1.2
2.75 1.1
⁄8” 0-30 Nm
.5 Nm
11.5
1.1
1.2
2.75 1.1
⁄8” 0-35 Nm
1 Nm
11.5
1.1
1.2
2.75 1.1
⁄8” 0-70 Nm
2 Nm
15
1.5
1.2
2.75 1.6
⁄2” 0-140 Nm
2.5 Nm
21.75
2.25
1.50
2.75 3.70
⁄2” 0-240 Nm
5 Nm
21.75
2.25
1.50
2.75 3.70
⁄2” 0-350 Nm
10 Nm
21.75
2.25
1.50
2.75 3.70
Memory Needle Models
1.81NLDNSS
38A260
1
3.51NLDNSS
38A261
1
91NLDNSS
38A265
1
92NLDNSS
38A284
3
182NLDNSS
38A276
3
302NLDNSS
38A277
3
352NLDNSS
38A279
3
702NLDNSS
38A282
3
1403NLDNSS
38A253
1
2403NLDNSS
38A255
1
3503NLDNSS
38A256
1
4804NLDNSS
38A267
3
⁄4” 0-480 Nm
10 Nm
28.00
2.25
1.50
2.75 5.75
8004NLDNSS*
38A269
3
⁄4” 0-800 Nm 20 Nm
47.00
2.50
1.50
2.75 10.10
14005NLDNSS*
38A246
1” 0-1400 Nm 25 Nm
74.00
2.50
3.50
3.00 30.00
***NOTE: 8004NLDNSS and 14005NLDNSS include 1 Extension handle.
21
TORQUE TOOLS
MECHANICAL WRENCHES
DIAL TORQUE WRENCHES - DUAL SCALE
Dial Torque Wrenches are designed for the automotive, nuclear and
industrial markets in addition to military installations throughout the world.
This series features sturdy torsion beam design for dependable long life and
accuracy. The small frame model offers working ranges from 3 in. lbs. to 50
ft. lbs. in 1/4” and 3/8” drives. The large frame model continues from 100
ft. lbs. through 2,000 ft. lbs. with 1/2”, 3/4” and 1” drives. Accuracy of both
series of ± 3% meets or exceeds B107.14 - 2004, ISO 6789 bi-directionally
from 20% to 100% of scale. All wrenches supplied with a N.I.S.T. traceable
certificate of calibration.
Features
• Sturdy body construction insures durability
• Easy to read laser marked dual scale
• Large easy to read dial is shock resistant and protected by a tough
metal guard
• Memory needle retains highest torque reading applied
• Calibrated in both CW and CCW direction
• Accuracy: ± 3% of indicated value, CW & CCW, from 20% to 100% of
full scale
• Individually serialized with matching certificate of calibration traceable
to N.I.S.T.
20005LDFE “T” type Dial Wrench must be operated
by two persons or a torque multiplier. The handle is
over 10 ft.long.
DIAL TORQUE WRENCHES - DUAL SCALE
Grainger
Product Code
Part # Drive
English
Nm
A
B
C
D
Wt.
Size
Range
Incr.
Range
Incr.
In.
In. In.In.Lbs.
Memory Needle Models
301LDIN
38A263
1
751LDIN
4YVP6
1
⁄4” 0-30 in. lb.
.5 in. lb.
0-3.5 Nm
.1 Nm 11.5
1.1
1.2
2.75
1.1
⁄4” 0-75 in. lb.
1 in. lb.
0-9 Nm
.2 Nm 11.5
1.1
1.2
2.75
1502LDIN
38A285 3
1.1
⁄8”
0-150 in. lb. 2 in. lb.
0-18 Nm
.5 Nm 11.5
1.1
1.2
2.75
2502LDIN
38A273
3
1.1
3002LDIN
4YVP5
3
⁄8”
0-250 in.lb. 5 in.lb.
0-30 Nm
.5 Nm 11.5
1.1
1.2
2.75
1.1
⁄8” 0-300 in. lb. 5 in. lb.
0-35 Nm
1 Nm 11.5
1.1
1.2
2.75
6002LDIN
38A275
3
1.1
⁄8” 0-600 in. lb. 10 in. lb. 0-70 Nm
2 Nm 15
1.5
1.2
2.75
502LDFN
38A274 3
1.6
⁄8” 0-50 ft. lb.
1 ft. lb.
0-70 Nm
2 Nm 15
1.5
1.2
2.75
1003LDFN
38A252 1
1.6
1753LDFN
38A254 1
⁄2”
0-100 ft. lb. 2 ft. lb
0-140 Nm
2.5 Nm 21.75
2.25
1.50
2.75
3.70
⁄2”
0-175 ft. lb. 5 ft. lb.
0-240 Nm
5 Nm 21.75
2.25
1.50
2.75
2503LDFN
4YVP7
1
3.70
⁄2”
0-250 ft. lb
0-350 Nm
10 Nm 21.75
2.25
1.50
2.75
3504LDFN
38A266
3
3.70
⁄4”
0-350 ft. lb. 10 ft. lb. 0-480 Nm
10 Nm 28.00
2.25
1.50
2.75
5.75
4YVP8 3
6004LDFN*
10005LDFN*
⁄4”
0-600 ft. lb. 10 ft. lb. 0-800 Nm
20 Nm 47.00
2.50
1.50
2.75
10.10
4YVP9
1” 0-1000 ft. lb. 20 ft. lb. 0-1400 Nm
25 Nm 74.00 2.50
3.50
3.00
30.00
5 ft. lb
Electric Signaling Models
6004LDFE** 38A268 3
⁄4“
0-600 ft. lb. 10 ft. lb. 0-800 Nm
20 Nm 47.00
2.50
1.50
2.75
10.10
10005LDFE**
38A245 1”
0-1000 ft. lb. 20 ft. lb. 0-1400 Nm
25 Nm 74.00 2.50
3.50
3.00
30.00
20005LDFE*** 38A248 1”
0-2000 ft. lb. 40 ft. lb. 0-2800 Nm
50 Nm 122.00 3.50
6.50
3.50
47.00
***NOTE: 6004LDFN and 10005LDFN include 1 Extension handle.
***NOTE: 6004LDFE and 10005LDFE include 1 Extension handle, indicating light and buzzer.
***NOTE: 20005LDFE is a “T” style wrench with 1” drive female head that can be use with a
torque multiplier. Includes 5 piece handle assembly, indicating light and buzzer.
22
TORQUE TOOLS
MECHANICAL WRENCHES
COMFORT GRIP MICROMETER ADJUSTABLE TORQUE WRENCHES - DUAL SCALE
Comfort-Grip Handle Dual Scale
Features
• Dual scale, calibrated dual direction
• Positive lock with spring loaded pull down lock ring
• Fast, accurate and easy to set
• Easy-to-read laser marked scale
• Most feature quick release buttons which provide good socket retention as well as easy socket removal
• Ergonomic comfort-grip
• Accuracy: ± 3% CW ± 5% CCW of indicated value, CW, from 20% to 100% of full scale
• Meets or exceeds ASME B107.14-2004, ISO 6789 standards
• Individually serialized with matching certificate of calibration traceable to N.I.S.T.
COMFORT GRIP MICROMETER ADJUSTABLE TORQUE WRENCHES - DUAL SCALE
Product Code
Grainger
Part #
Drive
English
Nm
A
B
C
D
Size
Range Incr.
Range
Incr.
In. In.In.In.
1501MRPH
4YVU6
1
2502MRPH
4YVX7 3
⁄4” 20-150 in. lb.
1
2.8 - 15.3 Nm
.12
10.00
1.06
.93
1.06
⁄8”
30-250 in. lb.
1
4.0 - 27.7 Nm
.12
11.25
1.06
1.06
10002MRPH
38A837 3
1.06
⁄8”
150-1000 in. lb.
5
19.8 - 110.2 Nm
.6
16.00
1.43
1.20
1002MFRPH
4YVX1
3
1.40
⁄8”
10-100 ft. lb.
1
16.9 - 132.2 Nm
.7
16.00
1.43
1.20
1503MFRPH
4YVX9
1
1.40
2503MFRPH
4YVY2 1
⁄2”
20-150 ft. lb.
1
34 - 197 Nm
1.4
19.00
1.70
1.40
1.40
⁄2”
30-250 ft. lb.
1
47 - 332 Nm
1.4
24.40
1.70
1.40
6004MFRPH
4YVY4
3
1.40
⁄4”
100-600 ft. lb.
5
169 - 779 Nm
6.8
42.00
2.50
2.10
1.40
23
TORQUE TOOLS
MECHANICAL WRENCHES
METAL HANDLE CLICK TYPE TORQUE WRENCHES - DUAL SCALE
Metal Handle Dual Scale. The metal handle series offers the user a rugged, industrial
strength torque wrench able to withstand the rigors of professional use. Handles are
lightly knurled for a tough, non-slip grip. There are 21 models of metal handle micrometer
adjustable torque wrenches available.
Features
• Dual scale, calibrated dual direction
• Positive lock with spring loaded pull down lock ring
• Fast, accurate and easy to set
• Easy-to-read laser marked scales
• Most feature quick release buttons which provide good socket retention as well as easy socket removal
• Accuracy: ± 3% CW ± 4% CCW of indicated value, CW, from 20% to 100% of full scale
• Individually serialized with matching certificate of calibration traceable to N.I.S.T.
METAL HANDLE CLICK TYPE TORQUE WRENCHES - DUAL SCALE
Product Code
Grainger
Part #
DriveEnglish
Nm
A
B
C
Wt.
Incr.
Range
Incr.
In.
In.
In.In.Lbs.
⁄4”
10-50 in. lb.
0.5
1.4 - 5.4 Nm
0.5
10.15 1.06
0.93
1.06
0.85
⁄4”
20-150 in.lb.
05
2.8-15.3 Nm
0.12
10.15 1.06
0.93
1.06
0.90
⁄8”
20-150 in. lb.
1
2.8 - 15.3 Nm
.12
10.15 1.06
0.93
1.06
0.90
⁄8”
30-200 in. lb.
1
4.0 - 22.0 Nm
.12
10.15 1.06
0.93
1.06
0.85
⁄8”
30-250 in. lb.
1
4.0 - 27.7 Nm
.12
11.25 1.06
0.93
1.06
0.95
⁄8”
100-750 in. lb.
5
14.1 - 81.9 Nm
.6
16.00 1.43
1.20
1.40
2.50
⁄8”
150-1000 in. lb.
5
19.8 - 110.2 Nm
.6
16.00 1.43
1.20
1.40
2.50
⁄2”
300-2500 in. lb.
10
39.6 - 276.9 Nm
1.2
18.00 1.70
1.40
1.40
3.20
⁄8”
5-75 ft. lb.
0.5
10.2 - 98.3 Nm
.7
16.00 1.43
1.20
1.40
2.50
⁄8”
10-100 ft. lb.
0.5
16.9 - 132.2 Nm
.7
16.00 1.43
1.20
1.40
2.55
⁄2”
20-150 ft. lb.
1
34 - 197 Nm
1.4
19.00 1.70
1.40
1.40
3.15
⁄2”
30-250 ft. lb.
1
47 - 332 Nm
1.4
24.40 1.70
1.40
1.40
3.15
⁄2”
30-250 ft. lb.
1
47 - 332 Nm
1.4
24.40 1.70
1.40
1.40
3.15
⁄4”
80-400 ft. lb.
5
85 - 491 Nm
3.4
34.25 2.50
2.10
1.40
10.30
⁄4”
75-450 ft. lb.
5
119 - 593 Nm
3.40
34.25 2.50
2.10
1.40
10.30
501MRMH
4YVU5
1
1501MRMH
38A809
1
1502MRMH
4YVX4 3
2002MRMH
4YVX5
3
2502MRMH
4YVX6 3
7502MRMH
4YVU8 3
10002MRMH
4YVX3 3
25003MRMH
38A806
1
752MFRMH
4YVU7 3
1002MFRMH
4YVU9 3
1503MFRMH
4YVX8 1
2503MFRMH
4YVY1
1
2503MFRMH-TH*** 30HM05
1
4004MFRMH
38A835
3
4504MFRMH
30HL93
3
6004MFRMH
4YVY3 3
⁄4”
100-600 ft. lb.
5
169 - 779 Nm
6.8
42.00 2.50
2.00
1.15
11.85
10005MFRMH*
4YVY5 1” 200-1000 ft. lb.
5
305 - 1322 Nm
6.8
70.00 3.00
3.00
1.50
25.10
20005MFMHSS** 38A804
1” 300-2000 ft. lb.
10
N/A
N/A 108.50 3.15 4.25
1.65
**NOTE: 10005MFRMH supplied with one extension handle and is packed in a metal box.
**NOTE: 20005MFMHSS (English scale only) supplied with two extension handles, fixed/non-ratcheting head and is packed in a sturdy cardboard box.
***NOTE: 2503MFRMH-TH supplied with attachment point for tethering
24
D
Size
Range
48.75
TORQUE TOOLS
MECHANICAL WRENCHES
MICROMETER ADJUSTABLE NEWTON METER TORQUE WRENCHES - SINGLE SCALE
Single Scale
MICROMETER ADJUSTABLE NEWTON METER TORQUE WRENCHES - SINGLE SCALE
Grainger Nm Sq. A B C D
Product Code
Part #
Range
Drive Incr.In. In. In.
602NMRMHSS
38A836
10-60 Nm
3
1002NMRMHSS
38A838
20-100 Nm
3
2003NMRMHSS
38A807
40-200 Nm
1
3403NMRMHSS
38A808
60-340 Nm
1
8004NMRMHSS
38A834
150-800 Nm
15005NMRMHSS*
38A805
300-1500 Nm
Wt.
In.
Lbs.
⁄8”
0.5 16.001.43 1.20 1.40
2.50
⁄8”
0.5 16.001.43 1.20 1.40
2.50
⁄2”
2
19.001.70 1.40 1.40
3.25
⁄2”
2
24.401.70 1.40 1.40
3.40
3
⁄4”
5
42.002.50 2.10 1.40
11.85
1”
10
70.00 3.00
25.10
3.00
1.50
*NOTE: 15005NMRMHSS supplied with one extension handle and is
packed in a metal box.
25
TORQUE TOOLS
MECHANICAL WRENCHES
QUICK SET SPLIT BEAM TORQUE WRENCHES
This unique “split beam” measuring element provides consistently accurate readings and rugged, trouble-free
performance. Fast setting of desired torque is easily accomplished by rotating adjustment knob until required torque value
is displayed in the torque window. 3⁄4” drive model features three-piece construction for easy disassembly and storage.
Features
• CDI Sealed Ratchet Head - is virtually maintenance free; more time working with the tool, less time on tool maintenance
• Thumb Screw Type Adjustment -is faster than cycling through a micrometer style torque wrench. Guard prevents setting
from being changed accidentally. Setting is displayed in window. Conversion table to Nm displayed on handle
• Sealed Neck - keeps dust and grit away from the torque mechanism for longer tool life
• “Split Beam” Measuring Element - provides accurate, reliable readings and eliminates the heavy coil spring used in
conventional click type wrenches. This yields fewer moving parts, reducing friction and wear
• Cushion Grip Handle - provides comfort plus control and resists most automotive fluids
• Designed for measuring torque in a clockwise direction only. Wrench is not reversible
• Guaranteed Accuracy: Accurate within ±4% of any clockwise setting from 20% of full scale to full scale.
QUICK SET SPLIT BEAM TORQUE WRENCHES
GraingerLength
Product Code
Part #
Drive Size
Range
(in.)
Ratchet
⁄8”
⁄8”
120-600 in. lbs. 10.0 in. lbs.
17 ⁄8 Flex-Head
20-100 ft. lbs. 2.0 ft. lbs.
171⁄8Flex-Head
⁄2”
40-250 ft. lbs. 5.0 ft. lbs.
217⁄16Flex-Head
⁄4”
80-400 ft. lbs. 10.0 ft. lbs.
381⁄8 ⁄4”
200-600 ft. lbs. 10.0 ft. lbs.
48 ⁄2Fixed-Head
WSC-50A
46E766
3
WSC-100CA
22N925
3
WSC-250CA
22N923
1
WSC-400CA
22N926
3
WSC-600CA
22N924
3
Increments
1
Fixed-Head
1
FLEX-HEAD MICROMETER ADJUSTABLE TORQUE WRENCH
Flex-Head English Single Scale
Features
• Single scale, dual direction
• Positive lock with spring loaded pull down lock ring
• Fast, accurate and easy to set
• Easy-to-read laser marked scales
• Flex Head pivots 15 degrees in both directions
• Rugged for Industrial use
• Accuracy: ± 4% CW ± 6% CCW of indicated value, CW, from 20% to 100% of full scale
• Meets or exceeds ASME B107.14-2004, ISO 6789 standards
• Individually serialized with matching certificate of calibration traceable to N.I.S.T.
FLEX-HEAD MICROMETER ADJUSTABLE TORQUE WRENCH
Product Code
802MFRFMHSS
26
Grainger
Torque
Sq.
A
B
Part #
Range
Drive
4YVX2
10-80 ft. lb.
3
⁄8”
Incr.
In.
In.
0.5
16.60 1.25
C
D
Wt.
In.
In.
Lbs.
1.15
0.90 2.500
TORQUE TOOLS
TORQUE PACK / TPMS
CDI TORQUE PACK PRESET WRENCHES
CDI’s Torque Pack for the Professional Tire Installer
Features
• Covers all automotive and light truck applications
• Color coding matches common torque sticks
• Rubber Boot cover on head protects expensive wheels
• One way ratchet prevents damage to torque wrench
• Easy to read torque values printed on each wrench
• Increased productivity by reducing adjustment time
MODEL PTWS-2-CDI GRAINGER PART # 46E765
INCLUDES:
5 Preset Color Coded Torque Wrenches
65 ft. lbs., 80 ft. lbs., 100 ft. lbs., 120 ft.lbs., 140 ft. lbs.
1 Micrometer Adjustable Torque Wrench
50 - 250 ft. lbs.
6 Deep Wall Sockets
3/4”, 13/16”, 7/8”, 17 mm, 19 mm and 21 mm
1 Socket Extension Bar
1/2” X 6 Inch
1 Color coordinated lug nut torque chart
1 Wall mounted blow moulded rack
TPMS-4VC GRAINGER PART # 46E686
INCLUDES:
CDI’s TPMS for the Professional Tire Installer
Features
• Prevents damage to costly componets
• No guessing, DO IT RIGHT the FIRST time
• Valve core tool prevents leaks and stripping
• Specifically designed to be used as a core remover and precise
installer for TPMS tire valve to eliminate risk of damaging
expensive TPMS sensors
• Preset to 4 ft. lbs. to prevent over or undertorquing
• Preset torque setting also helps prevent valve core leaks that
lead to low tire pressure and TPMS alerts
27
TORQUE TOOLS
MECHANICAL WRENCHES
INTERCHANGEABLE HEAD TORQUE WRENCHES
Features
• Interchangeable heads permit ratcheting, fixed, or open end torquing capability with
adjustable torque wrench bodies.
• A push of the locking pin provides quick-change action, with a wide range of head styles
to choose from.
• Micrometer Type Adjustment-ensures fast, accurate settings and changes.
• *Part Number 800NMIMH has Dual Pin Release for added strength
*Note: 800NMIMH new dual pin “Z”
receivers accept only dual pin
interchangeable heads.
INTERCHANGEABLE HEAD TORQUE WRENCHES - DUAL SCALE
Product Code Grainger Part #
Shank Size Nm Range
Incr.
English Range
50NMIMH
38A298
J
10 - 50
0.5
7.4 - 44.2
100NMIMH
38A297
J
20 - 100
0.5
14.8 - 73.8
200NMIMH38A288
Y
40 - 200
2
29.5 - 147.5
350NMIMH
38A287
X
70 - 350
2
44.3 - 250.8
800NMIMH*
38A296
Z
150 - 800
5
110.6 - 590
INTERCHANGEABLE HEAD TORQUE WRENCHES - SINGLE SCALE
Product Code Grainger Part #
English Range
Incr.
75MFIMHSS
38A307
Shank Size
J
5 - 75
0.5
150MFIMHSS
38A295
Y
20 - 150
1
250MFIMHSS
38A302
Y
30 - 250
1
SINGLE SETTING TORQUE WRENCHES
Single setting torque wrenches are designed for use on production lines and other
applications where a specific torque is required for repetitive operations.
Features
• Factory Pre-Set models are set at the factory to the customer’s specified torque setting, and are
furnished with a Certificate of Calibration.
• Please specify desired torque setting when order is placed.
• Featuring a durable, non-slip cushion grip
• Uses universal round shank heads
• Audible click and feel impulse torque control mechanism
• Tamper proof torque setting for production line use
• Accuracy: ± 4% of indicated value, in direction of torque indicator, from 20% to 100% of full scale
• Meets or exceeds ASME B107.14-2004, ISO 6789
SINGLE SETTING TORQUE WRENCHES
28
Product Code Grainger Product Code
Grainger Factory Pre-Set
Part #
English
Nm
ShankA
B
C
D
Wt.
Un-Set
Part #
5T-I
38A2915T-I-SET38A292
10 - 50 in. lb.
Range
Range
Size
In.
In.In.In.Lbs.
1.1 - 5.6
J
6.5
0.63
0.61
1
0.35
10T-I
38A30310T-I-SET
38A304
50 - 250 in. lb. 5.6 - 28
J
10
0.63
0.61
1
0.55
10ST-I
38A31010ST-I-SET
38A311
60 - 300 in. lb. 6.8 - 34
J
6.2
0.68
0.86
1.4
0.75
50T-I
38A30550T-I-SET
38A306
15 - 75 ft. lb.
20 -102
J
11
0.68
0.96
1.4
1.4
100T-I
38A293100T-I-SET
38A294
30 - 150 ft. lb.
41 - 203
Y
19.5 0.94
0.96
1.4
2.3
200T-I
38A299200T-I-SET
38A301
40 - 200 ft. lb.
54 - 271
Y
23.5 0.94
0.86
1.4
2.6
300T-I
38A308300T-I-SET
38A309
100 - 300 ft. lb. 135 - 406
X
27.7 1.12
1
1.4
3.9
600T-I
38A289600T-I-SET
38A290
120 - 600 ft. lb. 162 - 814
Z
55
1.25
1.25
10.45
1.5
TORQUE TOOLS
HEADS
RATCHETING SQUARE DRIVE HEADS - SAE
Z Shank Dual Pins
Square
Drive
(Inches)
1/4
3/8
1/2
3/4
1
J ( 0.425")
Grainger
Part #
TCQJD8A-72
TCQJD12A-80
TCQJD16A
38A644
38A645
38A643
Y (0.560")
Grainger
Part #
TCQYD12A-80
TCQYD16A
38A650
38A649
X ( 0.735")
Grainger
Part #
TCQXD16A
TCQXD24A
TCQXD32A
38A647
38A648
38A646
X ( 0.735")
Grainger
Part #
TCQXSD16A
TCQXSD24A
TCQXSD32A
38A637
38A638
38A636
X ( 0.735")
Grainger
Part #
TCQXO24A
TCQXO26A
TCQXO28A
TCQXO30A
TCQXO32A
TCQXO34A
TCQXO36A
TCQXO38A
TCQXO40A
TCQXO42A
TCQXO44A
TCQXO46A
TCQXO48A
TCQXO50A
TCQXO52A
TCQXO54A
TCQXO56A
TCQXO58A
TCQXO60A
TCQXO64A
38A549
38A525
38A552
38A529
38A518
38A519
38A522
38A526
38A521
38A530
38A528
38A532
38A520
38A536
38A531
38A523
38A527
38A524
38A533
38A539
TCQX068
38A538
Z (0.990")
Grainger
Part #
Z Dual Pins
Grainger
Part #
TCQZD24B
TCQZD32B
38A334
38A651
TCQZD24BDP
TCQZD32BDP
38A318
38A354
Z (0.990")
Grainger
Part #
Z Dual Pins
Grainger
Part #
TCQZSD24A
TCQZSD32A
38A642
38A641
TCQZSD24ADP
38A405
Z (0.990")
Grainger
Part #
TCQZO32A
TCQZO34A
TCQZO36A
TCQZO38A
TCQZO40A
TCQZO42A
TCQZO44A
TCQZO46A
TCQZO48A
TCQZO50A
TCQZO52A
TCQZO54A
TCQZO56A
TCQZO58A
TCQZO60A
TCQZO64A
TCQZO66A
TCQZO68A
TCQZO72A
38A594
38A595
38A598
38A602
38A597
38A604
46E737
38A606
38A596
38A608
38A605
38A599
38A603
38A601
38A607
38A609
38A610
38A613
38A612
TCQZO80A
TCQZO88A
TCQZO96A
38A611
38A614
38A617
FIXED SQUARE DRIVE HEADS - SAE
Z Shank Dual Pins
Square
Drive
(Inches)
1/4
3/8
1/2
3/4
1
J ( 0.425")
Grainger
Part #
TCQJSD8A
TCQJSD12A
TCQJSD16A
38A634
38A635
38A633
Y (0.560")
Grainger
Part #
TCQYSD12A
TCQYSD16A
38A640
38A639
OPEN END HEADS - SAE
Z Shank Dual Pins
Center of fastener to retaining pin:
TCQJ Series - 2.50”
TCQY Series - 3.00”
TCQX Series - 4.50”
TCQZ Series - 5.75”
Square
Drive
(Inches)
1/4
9/32
5/16
3/8
7/16
1/2
9/16
5/8
11/16
3/4
13/16
7/8
15/16
1
1 1/16
1 1/8
1 3/16
1 1/4
1 5/16
1 3/8
1 7/16
1 1/2
1 9/16
1 5/8
1 11/16
1 3/4
1 13/16
1 7/8
2
2 1/16
2 1/8
2 1/4
2 3/8
2 1/2
2 3/4
3
J ( 0.425")
Grainger
Part #
TCQJO8A
TCQJO9A
TCQJO10A
TCQJO12A
TCQJO14A
TCQJO16A
TCQJO18A
TCQJO20A
TCQJO22A
TCQJO24A
TCQJO26A
TCQJO28A
TCQJO30A
TCQJO32A
TCQJO34A
TCQJO36A
38A479
46E740
38A509
38A508
38A512
38A478
38A516
38A510
38A481
38A507
38A487
38A513
38A491
38A794
38A482
38A484
TCQJO40A
38A483
TCQJO44A
38A488
TCQJO48A
38A495
TCQJO52A
38A492
Y (0.560")
Grainger
Part #
TCQYO18A
TCQYO20A
TCQYO22A
TCQYO24A
TCQYO26A
TCQYO28A
TCQYO30A
TCQYO32A
TCQYO34A
TCQYO36A
TCQYO38A
TCQYO40A
TCQYO42A
TCQYO44A
TCQYO46A
TCQYO48A
TCQYO50A
TCQYO52A
38A591
38A589
38A554
38A584
38A559
38A590
38A564
38A553
38A555
38A558
38A560
38A557
38A565
38A562
38A569
38A556
38A573
38A566
TCQYO56A
38A561
TCQYO60A
38A570
TCQY072
46E745
TCQY080
46E736
Z Dual Pins
Grainger
Part #
TCQZO32ADP
TCQZO34ADP
TCQZO36ADP
TCQZO38ADP
TCQZO40ADP
TCQZO42ADP
TCQZO44ADP
TCQZO46ADP
TCQZO48ADP
TCQZO50ADP
TCQZO52ADP
TCQZO54ADP
TCQZO56ADP
TCQZO58ADP
TCQZO60ADP
TCQZO64ADP
TCQZO66ADP
TCQZO68ADP
TCQZO72ADP
TCQZO76ADP
TCQZO80ADP
38A355
46E693
38A358
38A389
38A357
46E737
38A391
38A393
38A356
38A395
38A392
38A359
38A390
38A360
38A394
38A396
38A397
38A401
38A399
38A402
38A398
29
TORQUE TOOLS
HEADS
OPEN END HEADS - METRIC
Square
Drive
(mm)
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
29
30
32
34
36
38
41
46
50
55
60
65
70
J ( 0.425")
Grainger
Part #
TCQJOM6A
TCQJOM7A
TCQJOM8A
TCQJOM9A
TCQJOM10A
TCQJOM11A
TCQJOM12A
TCQJOM13A
TCQJOM14A
TCQJOM15A
TCQJOM16A
TCQJOM17A
TCQJOM18A
TCQJOM19A
TCQJOM20A
TCQJOM21A
TCQJOM22A
TCQJOM23A
TCQJOM24A
TCQJOM25A
TCQJOM26A
TCQJOM27A
38A511
38A514
38A515
38A517
38A480
38A485
38A486
38A489
38A490
38A493
38A494
38A496
38A497
38A498
46E739
38A499
38A501
38A502
38A503
38A504
38A505
38A506
Y (0.560")
Grainger
Part #
30
J ( 0.425")
TCQJ022ARTH60
TCQJ032ARTH
TCQJ034ARTH
TCQJ036ARTH
TCQJ038ARTH
TCQJ040ARTH
TCQJ044ARTH
TCQJ048ARTH
TCQJ050ARTH
TCQJ052ARTH
TCQJ056ARTH
TCQJ060ARTH
TCQJ064ARTH
TCQJ066ARTH
TCQJ086ARTH
Grainger
Part #
38A628
38A620
38A621
38A623
38A624
46E756
38A625
38A622
38A627
38A626
46E757
46E758
46E759
46E760
46E761
Grainger
Part #
Z (0.990")
Grainger
Part #
Z Dual Pins
Grainger
Part #
Z Shank Dual Pins
TCQYOM14A
TCQYOM15A
TCQYOM16A
TCQYOM17A
TCQYOM18A
TCQYOM19A
TCQYOM20A
TCQYOM21A
TCQYOM22A
TCQYOM23A
TCQYOM24A
TCQYOM25A
TCQYOM26A
TCQYOM27A
TCQYOM29A
TCQYOM30A
TCQYOM32A
TCQYOM34A
TCQYOM36A
38A563
38A567
38A568
38A571
38A572
38A574
38A575
38A576
38A577
38A578
38A579
38A580
38A581
38A582
38A583
38A585
38A586
38A587
38A588
OPEN END THIN HEADS - SAE
Square Drive
(Inches)
11/16
1
1 1/16
1 1/8
1 3/16
1 1/4
1 3/8
1 1/2
1 9/16
1 5/8
1 3/4
1 7/8
2
2 1/16
2 1/8
2 1/4
2 11/16
X ( 0.735")
Y (0.560")
Grainger
Part #
TCQY052ARTH
TCQY056ARTH
TCQY060ARTH
TCQY064ARTH
38A630
38A629
38A631
30HL92
TCQY068ARTH
TCQY072ARTH
38A632
46E738
TCQXOM17A
TCQXOM18A
TCQXOM19A
TCQXOM20A
TCQXOM21A
TCQXOM22A
TCQXOM23A
TCQXOM24A
TCQXOM25A
TCQXOM26A
TCQXOM27A
TCQXOM29A
TCQXOM30A
TCQXOM32A
TCQXOM34A
TCQXOM36A
38A534
38A535
38A537
38A540
38A541
38A542
38A543
38A544
38A545
38A546
38A547
38A548
38A550
46E741
46E742
38A551
TCQXOM41A
46E744
TCQZOM24A
38A615
TCQZOM24ADP
38A403
TCQZOM27A
38A616
TCQZOM27ADP
38A404
TCQZOM30A
TCQZOM32A
38A618
38A619
TCQZOM36A
46E743
TCQZOM50A
TCQZOM55A
38A592
38A593
TCQZOM30ADP
TCQZOM32ADP
TCQZOM34ADP
TCQZOM36ADP
TCQZOM38ADP
TCQZOM41ADP
TCQZOM46ADP
TCQZOM50ADP
TCQZOM55ADP
TCQZOM60ADP
TCQZOM65ADP
TCQZOM70ADP
38A406
46E699
38A408
38A410
38A411
38A413
38A415
38A417
38A419
38A449
38A450
38A451
TORQUE TOOLS
HEADS
12-POINT BOX END 15° OFFSET HEADS - SAE
Z Shank Dual Pins
Square
Drive
(Inches)
1/4
9/32
5/16
3/8
7/16
1/2
9/16
5/8
11/16
3/4
13/16
7/8
15/16
1
1 1/16
1 1/8
1 3/16
1 1/4
1 5/16
1 3/8
1 7/16
1 1/2
1 9/16
1 5/8
1 11/16
1 3/4
1 13/16
1 7/8
2
2 1/16
2 1/8
2 3/16
2 1/4
2 3/8
2 1/2
J ( 0.425")
Grainger
Part #
TCQJX8A
TCQJX9A
TCQJX10A
TCQJX12A
TCQJX14A
TCQJX16A
TCQJX18A
TCQJX20A
TCQJX22A
TCQJX24A
TCQJX26A
TCQJX28A
TCQJX30A
TCQJX32A
TCQJX34A
38A664
38A696
46E755
38A688
38A691
38A663
38A695
38A689
38A666
38A687
38A670
38A692
38A673
38A662
38A667
Y (0.560")
Grainger
Part #
TCQYX16A
TCQYX18A
TCQYX20A
TCQYX22A
TCQYX24A
TCQYX26A
TCQYX28A
TCQYX30A
TCQYX32A
TCQYX34A
TCQYX36A
TCQYX38A
TCQYX40A
TCQYX42A
38A735
38A767
38A765
38A736
38A761
38A740
38A766
38A742
38A734
38A737
30HL94
38A733
38A739
38A743
TCQYX46A
TCQYX48A
TCQYX50A
TCQYX52A
38A747
38A738
38A750
38A744
X ( 0.735")
Grainger
Part #
TCQXX20A
TCQXX22A
TCQXX24A
TCQXX26A
TCQXX28A
TCQXX30A
TCQXX32A
TCQXX34A
TCQXX36A
TCQXX38A
TCQXX40A
TCQXX42A
TCQXX44A
TCQXX46A
TCQXX48A
TCQXX50A
TCQXX52A
TCQXX54A
TCQXX56A
TCQXX58A
TCQXX60A
TCQXX64A
46E750
46E746
38A726
38A706
38A731
38A710
38A698
38A699
38A703
38A707
38A702
38A711
38A709
38A713
38A701
38A716
38A712
38A704
38A708
38A705
38A714
38A718
Z (0.990")
Grainger
Part #
TCQZX30A
46E754
TCQZX34A
TCQZX36A
TCQZX38A
TCQZX40A
TCQZX42A
TCQZX44A
TCQZX46A
TCQZX48A
TCQZX50A
TCQZX52A
TCQZX54A
TCQZX56A
TCQZX58A
TCQZX60A
TCQZX64A
TCQZX66A
TCQZX68A
38A769
38A772
38A768
38A771
38A775
46E753
38A777
38A770
38A779
38A776
46E752
38A774
38A773
38A778
38A780
38A781
38A784
TCQZX72A
38A783
TCQZX80A
38A782
Z Dual Pins
Grainger
Part #
TCQZX26ADP
38A817
TCQZX34ADP
TCQZX36ADP
TCQZX38ADP
TCQZX40ADP
TCQZX42ADP
38A811
38A814
38A818
38A813
38A820
TCQZX46ADP
TCQZX48ADP
TCQZX50ADP
TCQZX52ADP
TCQZX54ADP
TCQZX56ADP
TCQZX58ADP
TCQZX60ADP
TCQZX64ADP
TCQZX66ADP
TCQZX68ADP
TCQZX70ADP
TCQZX72ADP
TCQZX76ADP
TCQZX80ADP
38A822
38A812
38A824
38A821
38A815
38A819
38A816
38A823
38A825
38A826
38A829
38A830
38A828
38A831
38A827
12-POINT BOX END 0° OFFSET - SAE
Square Drive
(Inches)
3/8
7/16
1/2
9/16
5/8
11/16
3/4
7/8
15/16
1
J ( 0.425")
Grainger Part #
TCQJXD12A
TCQJXD14A
TCQJXD16A
TCQJXD18A
38A455
38A456
38A452
38A457
TCQJXD22A
TCQJXD24A
TCQJXD28A
TCQJXD30A
TCQJXD32A
38A453
38A454
46E713
46E714
46E712
Y (0.560")
TCQYXD20A
TCQYXD22A
TCQYXD24A
TCQYXD28A
TCQYXD30A
Grainger Part #
38A460
46E715
38A459
30HL95
38A458
31
TORQUE TOOLS
HEADS
12-POINT BOX END 0° OFFSET - METRIC
Square
Drive
(mm)
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
29
30
32
34
36
41
J ( 0.425")
Grainger
Part #
TCQJXM6A
TCQJXM7A
TCQJXM8A
TCQJXM9A
TCQJXM10A
TCQJXM11A
TCQJXM12A
TCQJXM13A
TCQJXM14A
TCQJXM15A
TCQJXM16A
TCQJXM17A
TCQJXM18A
TCQJXM19A
TCQJXM20A
TCQJXM21A
TCQJXM22A
TCQJXM23A
TCQJXM24A
TCQJXM25A
TCQJXM26A
TCQJXM27A
38A690
38A693
38A694
38A697
38A665
38A668
38A669
38A671
38A672
38A674
38A675
38A676
38A677
38A678
38A679
38A680
38A681
38A682
38A683
38A684
38A685
38A686
Y (0.560")
Grainger
Part #
X ( 0.735")
Z (0.990")
Grainger
Part #
Z Dual Pins
Grainger
Part #
Z Shank Dual Pins
30HL87
38A741
38A745
38A746
38A748
38A749
38A751
38A752
38A753
38A754
38A755
38A756
38A757
38A758
38A759
38A760
38A762
38A763
46E751
38A764
TCQYXM13A
TCQYXM14A
TCQYXM15A
TCQYXM16A
TCQYXM17A
TCQYXM18A
TCQYXM19A
TCQYXM20A
TCQYXM21A
TCQYXM22A
TCQYXM23A
TCQYXM24A
TCQYXM25A
TCQYXM26A
TCQYXM27A
TCQYXM29A
TCQYXM30A
TCQYXM32A
TCQYXM34A
TCQYXM36A
TCQXXM16A
TCQXXM17A
TCQXXM18A
TCQXXM19A
TCQXXM20A
TCQXXM21A
TCQXXM22A
TCQXXM23A
TCQXXM24A
TCQXXM25A
TCQXXM26A
TCQXXM27A
TCQXXM29A
TCQXXM30A
TCQXXM32A
TCQXXM34A
TCQXXM36A
46E747
38A715
38A732
38A717
38A719
38A720
38A721
38A722
38A723
38A724
46E748
38A725
46E749
38A727
38A728
38A729
38A730
TCQZXM24ADP
38A832
TCQZXM27ADP
38A833
TCQZXM30ADP
TCQZXM32ADP
TCQZXM34ADP
TCQZXM36ADP
TCQZXM41ADP
38A840
38A841
38A842
38A409
38A412
46
TCQZXM46ADP
38A414
50
TCQZXM50ADP
38A416
55
TCQZXM55ADP
38A418
60
TCQZXM60ADP
38A448
12 POINT RATCHET WRENCH HEADS - METRIC
Square Drive
(mm)
16
18
24
J ( 0.425")
Grainger
Part #
TCQQJBOERM16
TCQQJBOERM18
38A383
38A384
Y (0.560")
Grainger
Part #
TCQYBOERM18
TCQYBOERM24
46E696
46E697
12 POINT RATCHET WRENCH HEADS - SAE
Square Drive
(Inches)
3/8
7/16
1/2
9/16
5/8
11/16
3/4
32
Grainger
Part #
J ( 0.425")
Grainger Part #
TCQJBOER12
TCQJBOER14
TCQJBOER16
TCQJBOER18
TCQJBOER20
38A385
38A387
38A381
38A388
38A386
TCQJBOER24
38A382
Y (0.560")
Grainger
Part #
TCQYBOER18
TCQYBOER20
TCQYBOER22
TCQYBOER24
46E710
30HL89
30HL88
46E698
TCQZXM24A
TCQZXM25A
TCQZXM26A
TCQZXM27A
TCQZXM29A
TCQZXM30A
TCQZXM32A
TCQZXM34A
TCQZXM36A
38A785
38A786
38A787
38A788
38A789
38A790
38A791
38A792
38A793
TORQUE TOOLS
HEADS
12-POINT BOX END 10° OFFSET - SAE
Square Drive
(Inches)
1/2
9/16
5/8
11/16
3/4
7/8
15/16
1
1 1/8
1 3/8
1 1/2
J ( 0.425")
TCQJXB16A
TCQJXB18A
TCQJXB20A
TCQJXB22A
TCQJXB24A
Grainger Part #
38A461
38A469
38A468
38A462
38A467
Y (0.560")
Grainger Part #
TCQYXB20A
463720
TCQYXB24A
TCQYXB28A
TCQYXB30A
TCQYXB32A
TCQYXB36A
38A477
46E719
38A474
38A472
38A473
X ( 0.735")
Grainger Part #
TCQXXB44A
TCQXXB48A
38A471
38A470
12-POINT BOX END 10° OFFSET - METRIC
Square
Drive (mm)
11mm
12mm
13mm
14mm
16mm
18mm
19mm
24mm
28mm
J ( 0.425")
TCQJXBM11A
TCQJXBM12A
TCQJXBM13A
TCQJXBM14A
TCQJXBM16A
TCQJXBM18A
TCQJXBM19
Grainger
Part #
46E716
46E717
38A463
46E718
38A464
38A465
38A466
Y (0.560")
Grainger
Part #
TCQYXBM18A
38A475
TCQYXBM24A
TCQYXBM28A
38A476
30HL97
6-POINT BOX END 10° OFFSET - METRIC
Square Drive
(mm)
18
24
Y (0.560")
TCQYSBXM18
TCQYSBXM24
Grainger
Part #
30HL96
30HL98
12 POINT FLARE NUT HEADS - SAE
Square Drive
(Inches)
9/16
5/8
11/16
3/4
13/16
7/8
15/16
1
1 1/16
1 1/8
1 3/16
1 1/4
J ( 0.425")
TCQJRX18A
TCQJRX20A
TCQJRX22A
TCQJRX24A
TCQJRX26A
TCQJRX28A
TCQJRX30A
TCQJRX32A
TCQJRX34A
Grainger Part #
38A368
38A366
38A362
38A365
38A363
38A367
38A364
38A361
46E694
Y (0.560")
TCQYRX18A
TCQYRX20A
TCQYRX22A
TCQYRX24A
TCQYRX26A
TCQYRX28A
TCQYRX30A
TCQYRX32A
TCQYRX34A
TCQYRX36A
TCQYRX38A
TCQYRX40A
Grainger Part #
38A380
38A378
38A370
38A377
38A375
38A379
38A376
38A369
38A371
38A373
38A374
38A372
33
TORQUE TOOLS
HEADS
6 POINT FLARE NUT HEADS - METRIC
Square
Drive (mm)
8
9
10
11
12
13
14
15
16
17
18
19
20
21
J ( 0.425")
TCQJRXSM8A
TCQJRXSM9A
TCQJRXSM10A
TCQJRXSM11A
TCQJRXSM12A
TCQJRXSM13A
TCQJRXSM14A
TCQJRXSM15A
TCQJRXSM16A
TCQJRXSM17A
TCQJRXSM18A
TCQJRXSM19A
TCQJRXSM20A
Grainger Part #
Grainger Part #
Y (0.560")
46E707
46E708
38A421
38A423
38A424
38A425
38A426
46E702
46E703
38A428
46E704
46E705
46E706
30HL90
38A439
38A440
38A441
38A442
38A443
38A444
TCQYRXSM15A
TCQYRXSM16A
TCQYRXSM17A
TCQYRXSM18A
TCQYRXSM19A
TCQYRXSM20A
TCQYRXSM21A
6 POINT FLARE NUT HEADS - SAE
Square Drive
(Inches)
1/4
5/16
3/8
7/16
1/2
9/16
5/8
11/16
3/4
13/16
7/8
15/16
1
1 1/8
TCQJRXS8A
TCQJRXS10A
TCQJRXS12A
TCQJRXS14A
TCQJRXS16A
TCQJRXS18A
Grainger
Part #
46E701
38A431
38A430
38A432
38A420
38A433
TCQJRXS22A
TCQJRXS24A
38A422
38A429
TCQJRXS30A
38A427
J ( 0.425")
ADAPTORS
Grainger
Part #
Y (0.560")
TCQYRXS18A
TCQYRXS20A
TCQYRXS22A
TCQYRXS24A
TCQYRXS26A
TCQYRXS28A
TCQYRXS30A
TCQYRXS32A
TCQYRXS36A
46E709
38A446
38A435
38A445
38A437
38A447
38A438
38A434
38A436
Product Code
Grainger Part #
TCQJ-Y
TCQXY
TCQY-X
TCQZ-X
TCQZD32A-1
46E763
46E764
46E762
30HL91
46E711
RATCHETING FLARE NUT HEAD
Square Drive
(Inches)
9/16
5/8
11/16
3/4
13/16
7/8
15/16
1
1 1/8
1 1/4
1 3/8
1 1/2
16mm
1 5/8
1 7/8
34
J ( 0.425")
Grainger Part #
TCRTWH36J
TCRTWH40H
TCRTWH44J
46E734
46E732
46E722
TCRTWH52J
46E726
Y (0.560")
Grainger Part #
TCRTWH48Y
46E735
TCRTWH56Y
TCRTWH60Y
TCRTWH64Y
TCRTWH72Y
TCRTWH80Y
TCRTWH88Y
46E733
46E728
46E721
46E725
46E724
46E727
X ( 0.735")
TCRTWH96X
TCRTWHM16J
46E730
TCRTWH104Y
TCRTWH120Y
46E729
46E731
Grainger Part #
46E723
Descriptions
X to J
Y to X
X to Y
Z Male to X Female
Z Shank 1 Drive
TORQUE TOOLS
FACTS
TORQUE WRENCH SAFETY
These precautions should always be taken when using any torque
wrench to avoid possible injury:
• Read instruction manual completely before using torque wrench.
• Safety glasses or goggles should be worn at all times when using any
hand tool.
• Always pull, DO NOT PUSH, to apply torque and adjust your stance to
prevent a fall.
• A “cheater bar” should NEVER be used on a torque wrench to apply
excess leverage.
Common Torque Abbreviations
• Do not use with sockets or fasteners showing wear or cracks.
Foot Pounds – ft. lbs.
Inch Pounds – in. lbs.
Inch Ounces – in. ozs.
Newton Meter – Nm
Centi-Newton Meter – cNm
Meter Kilogram – Mkg
• Ratchet mechanism may slip or break if dirty, mismatched or worn
parts are used.
• Make sure direction lever is fully engaged
TORQUE WRENCH USAGE
• All mechanical torque wrenches are calibrated from 20% to 100% of full scale, therefore, they should
never be used below or above those limits
• To determine which torque wrench capacity is best suited for an application, many factors must be
considered. However, as a recommendation, use a torque wrench in the middle 50% of the overall
capacity of the tool. This will result in longer tool life, ease of use for the operator and increased
accuracy from “clicker” type torque wrenches
• Always grasp handle firmly in the center of the grip
• Approach final torque slowly and evenly
• Stop pulling wrench immediately when target torque is reached
• Never use a torque wrench to break fasteners loose
• Should be cleaned and stored properly
• Should always be stored at it’s lowest torque setting
• Wrenches should be re-calibrated if dropped. Should never be used in excess of it’s capacity
• Torque wrenches should be “exercised” a minimum of three times at 100% of full scale before use
• The wrench selected should be calibrated in the same torque units that are specified
• Use of a “cheater bar” will result in an inaccurate reading and can possibly damage the wrench
• Torque wrenches will last longer if reasonable care is taken. Always unwind handle to the lowest setting
after each use. Do not attempt to lubricate the internal torque mechanism. Clean torque wrench by
wiping, do not immerse. The wrench should be sent to a qualified calibration lab once every year or
every 5000 cycles for re-calibration
Easy-to-use Torque
Conversion Table
To ConvertMultiply
From
To
by
in. oz.
in. lb.
0.0625
in. lb.
in. oz.
16
in. lb.
ft. lb.
0.08333
in. lb.
cmkg
1.1519
in. lb.Mkg
0.011519
in. lb.Nm
0.113
in. lb.
dNm
1.13
ft. lb.
in. lb.
12
ft. lb.Mkg
0.1382
ft. lb.Nm
1.356
dNm
0.885
in. lb.
dNmNm
0.10
Nm
dNm
10
Nm
cmkg
NmMkg
10.2
0.102
Nm
in. lb.
8.85
Nm
ft. lb.
0.7376
cmkg
in. lb.
0.8681
cmkgNm
0.09807
Mkg
in. lb.
86.81
Mkg
ft. lb.
7.236
MkgNm
9.807
35
Torque Products Warranty:
Snap-on Industrial Brands warrants to the original purchaser of CDI Torque Products that the company’s torque
products are free from defects in workmanship and materials. Snap-on Industrial Brands will repair or replace
CDI Torque Products which fail to give satisfactory service due to defective workmanship or materials (excluding calibration) for 12 months from the date of original purchase. Snap-on Industrial Brands warrants “initial,
out of box calibration” of each new, unused CDI Torque Product. Repair, replacement or recalibration shall be at
the election and expense of Snap-on Industrial Brands, and is your exclusive remedy in place of all other rights
and remedies. Products must be returned with proof of purchase, freight prepaid, to a CDI Torque Products
repair center for warranty service. Snap-on Industrial Brands will repair or replace Williams’ Torque Multipliers
which fail to give satisfactory service due to defective workmanship or material for 90 days from the date of
original purchase. Snap-on Industrial Brands does not provide any warranty for products subjected to abnormal
use. Abnormal use includes misuse, accident, modification, unreasonable use, neglect, lack of maintenance, or
use after the tool is significantly worn.
Torque Products Warranty Stations:
Team Torque, Inc.
1231 Park Avenue
Bismarck, ND 58504
Phone: 701.223.4552 or 888.682.8675
Fax: 701.222.3731
E-Mail: service@teamtorque.com
Web: www.teamtorque.com
Angle Repair
175 Angle Drive
Beckley, WV 25801
Phone: 304.253.5729
Fax: 304.252.0481
E-Mail: estimate@anglerepair.com
For more information, contact your Grainger
Representative or visit Grainger.com®
8SS5301
Download PDF
Similar pages