10/100 mbps managed optical demarcation module

10/100 Mbps Managed Optical
Demarcation Module
iMcV-FiberLinX-II
PRODUCT FEATURES
•
•
•
•
•
•
The iMcV-FiberLinX-II intelligent media converter connects a Host/
Remote Ethernet network over a fiber optic or CAT 5 copper connection.
It combines media conversion with an advanced-feature set for
network management and troubleshooting, including OAM (Operations,
Administration and Maintenance), Extra-Tagging and EtherType control
functionality. With the iMcV-FiberLinX-II, administrators can observe
the end-points over the fiber segment between them, as a single
management entity. Bandwidth scalability and support for MIBs II
makes this modular device a cost-effective solution.
iMcV-FiberLinX-II allows for remote configuration and alerts
administrators to any potential problems on the long-haul fiber run,
provides vital information on link condition and reports data traffic
statistics.. In addition to the iMcV-FiberLinX-II's support for Host/
Remote environments, the product also has built-in support for the
Unified Management Agent (UMA). With UMA, the central location can
manage all Host/Remote pairs installed in an iMediaChassis with the
single IP address of the chassis.
Optional single- or dual-SFP port versions or all copper (RJ-45) port
versions are also available for complete network flexibility. The iMcVFiberLinX-II SFP requires one or two MSA-compliant fiber optic SFP
modules (sold separately) to operate. [Copper SFPs are not supported.]
Q-in-Q Extra/Tagging
SNMP Manageable
OAM 802.3ag/ah (Operation, Administration & Management)
Per-port bi-directional Bandwidth control
Features powerful LinkLoss, FiberAlert and loopback troubleshooting
All management traffic remains isolated from the remote LAN
Ordering Information
Model
Fiber range
Fiber
Number
Ports
iMcV-FiberLinX-II TX/SFP, TX/TX
856-14500 SFP
1
Various
856-14501 SFP
2
Various
856-14010
100 m
iMcV-FiberLinX-II TX/FX
856-14011 MM1300-ST
1
5 km
856-14012 MM1300-SC
1
5 km
856-14015 SM1310/PLUS-ST
1
40 km
856-14016 SM1310/PLUS-SC
1
40 km
856-14017 SM1310/LONG-ST
1
80 km
856-14018 SM1310/LONG-SC
1
80 km
856-14021 SM1550/LONG-SC
1
80 km
856-14022 SM1550/XLONG-SC 1
100 km
SINGLE STRAND FIBER *
856-14039 SSFX-MM1310-SC 1
2 km
856-14040 SSFX-MM1550-SC 1
2 km
856-14043 SSFX-SM1310-SC
1
20 km
856-14044 SSFX-SM1550-SC
1
20 km
SSFX-SM1310/
856-14045 PLUS-SC
1
40 km
SSFX-SM1550/
856-14046 PLUS-SC
1
40 km
SSFX-SM1310/
856-14047 LONG-SC
1
60 km
SSFX-SM1550/
856-14048 LONG-SC
1
60 km
Ethernet
PORTS
Ethernet
Connector
2
1
3
RJ45
RJ45
RJ45
2
2
2
2
2
2
2
2
RJ45
RJ45
RJ45
RJ45
RJ45
RJ45
RJ45
RJ45
2
2
2
2
RJ45
RJ45
RJ45
RJ45
2
RJ45
2
RJ45
2
RJ45
2
RJ45
* These products have single-strand fiber technology. Deploy in pairs or connect another compatible B&B IMC LLC single-strand fiber product.
iMcV-FiberLinX-II also available in CWDM Fiber.
Call for details.
www.bb-elec.com
|
iMcV-FiberLinX-II_3713ds
10/100 Mbps Managed Optical
Demarcation Module
iMcV-FiberLinX-II
Specifications
General
Preserves complete end-to-end fiber connection integrity
Broadcast Storm Protection
Supports Extra Tagging (Q-in-Q) and selectable EtherTypes
Bi-directional bandwidth control
Supports 802.3ag/ah OAM (Operation, Administration & Management)
ITU-T Y.1731 End-to-end service
Read/write IEEE 802.1Q VLAN-tags
QoS: IEEE 802.1p-based packet prioritization (2 queues [high/low] with 8 levels of
priority)
Layer 2 packet switching, store and forward operation
Forwarding rate: 14,881 pps for 10 Mbps; 148,810 pps for 100 Mbps
AutoCross for MDI/MDIX
Features Auto Negotiation and Selective Advertising
Supports Half and Full-Duplex operation
MTU: Supports over-sized (Jumbo) packets up to 1916 bytes per packet
Management
SNMP V1 and V2c compatible
Includes GUI-based iView² software for remote management and upgrades
Monitors far-end (remote) status without a physical presence or separate
connection
IEEE 802.3x Flow Control
Includes DHCP and TFTP clients
Supports Telnet
Includes loopback test modes (MAC swap)
Includes LinkLoss and FiberAlert
Supports the Unified Management Agent (UMA)
Ethernet Protocols Supported
IEEE 802.3i 10Base-T twisted pair
IEEE 802.3u 100Base-TX twisted pair
IEEE 802.3u 100Base-FX or SX fiber
Mechanical
Dimensions
Shipping Weight
Power Consumption
850mA at 3.3V
Environmental
Operating Temperature
Storage Temperature
Operating Humidity
Regulatory Approvals
FCC Class A
UL/cUL, CE, CSA, CB
Standard single-slot chassis module
4 oz.
+32° to +122° F (0° to +50° C)
0° to +160° F (-20° to +70° C)
5 to 95% Non-condensing
Mechanical diagram
(dimensions in inches)
.38
3.04
2.73
.61
4.19
3.57
3.45
1.00
2.13
orders@bb-elec.com
support@bb-elec.com
.78 .27
.68
.34
1.28
.71
International Office: 707 Dayton Road PO Box 1040 Ottawa, IL 61350 USA 815-433-5100 Fax 433-5104
European Office: Westlink Commercial Park Oranmore Co. Galway Ireland +353 91 792444 Fax +353 91 792445
Download PDF
Similar pages