Samsung Messager™
( S C H - r 4 5 0
P O R T A B L E
M O B I L E
S e r i e s )
T R I - B A N D
P H O N E
User Manual
Please read this manual before operating your
phone, and keep it for future reference.
Intellectual Property
All Intellectual Property, as defined below, owned by or which is otherwise the property of Samsung or its respective suppliers relating to
the SAMSUNG Phone, including but not limited to, accessories, parts, or software relating there to (the “Phone System”), is proprietary to
Samsung and protected under federal laws, state laws, and international treaty provisions. Intellectual Property includes, but is not limited
to, inventions (patentable or unpatentable), patents, trade secrets, copyrights, software, computer programs, and related documentation
and other works of authorship. You may not infringe or otherwise violate the rights secured by the Intellectual Property. Moreover, you
agree that you will not (and will not attempt to) modify, prepare derivative works of, reverse engineer, decompile, disassemble, or
otherwise attempt to create source code from the software. No title to or ownership in the Intellectual Property is transferred to you. All
applicable rights of the Intellectual Property shall remain with SAMSUNG and its suppliers.
Samsung Telecommunications America (STA), LLC
Headquarters:
1301 E. Lookout Drive
Richardson, TX 75082
Toll Free Tel:
Customer Care Center:
1000 Klein St.
Plano, TX 75074
1.888.987.HELP (4357)
Internet Address: http://www.samsungusa.com
©2007 Samsung Telecommunications America, LLC is a registered trademark of Samsung Electronics America, Inc. and its related
entities.
Do you have questions about your Samsung Mobile Phone?
For 24 hour information and assistance, we offer a new FAQ/ARS System (Automated Response System) at:
www.samsungwireless.com/support
GH68-18988A
r450.04_BG10_CB_071708_F5
Printed in Korea.
Licensed by Qualcomm Incorporated under one or more of the following patents: U.S. Patent No. 4, 901, 307; 5, 056, 109; 5, 099, 204;
5, 101, 501; 5, 103, 459; 5, 107, 225; 5, 109, 390.
T9 Text Input is licensed by Tegic Communications and is covered by U.S. Pat. 5,818,437; U.S. Pat. 5,953,541; U.S. Pat. 6,011,554 and
other patents pending.
Openwave® is a registered Trademark of Openwave, Inc.
RSA® is a registered Trademark RSA Security, Inc.
The Bluetooth® word mark, figure mark (stylized “B Design”), and combination mark (Bluetooth word mark and “B Design”) are registered
trademarks and are wholly owned by the Bluetooth SIG.
microSDTM and the microSD logo are Trademarks of the SD Card Association.
Disclaimer of Warranties; Exclusion of Liability
EXCEPT AS SET FORTH IN THE EXPRESS WARRANTY CONTAINED ON THE WARRANTY PAGE ENCLOSED WITH THE PRODUCT, THE
PURCHASER TAKES THE PRODUCT “AS IS”, AND SAMSUNG MAKES NO EXPRESS OR IMPLIED WARRANTY OF ANY KIND WHATSOEVER
WITH RESPECT TO THE PRODUCT, INCLUDING BUT NOT LIMITED TO THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR ANY
PARTICULAR PURPOSE OR USE; THE DESIGN, CONDITION OR QUALITY OF THE PRODUCT; THE PERFORMANCE OF THE PRODUCT; THE
WORKMANSHIP OF THE PRODUCT OR THE COMPONENTS CONTAINED THEREIN; OR COMPLIANCE OF THE PRODUCT WITH THE
REQUIREMENTS OF ANY LAW, RULE, SPECIFICATION OR CONTRACT PERTAINING THERETO. NOTHING CONTAINED IN THE INSTRUCTION
MANUAL SHALL BE CONSTRUED TO CREATE AN EXPRESS OR IMPLIED WARRANTY OF ANY KIND WHATSOEVER WITH RESPECT TO THE
PRODUCT. IN ADDITION, SAMSUNG SHALL NOT BE LIABLE FOR ANY DAMAGES OF ANY KIND RESULTING FROM THE PURCHASE OR USE OF
THE PRODUCT OR ARISING FROM THE BREACH OF THE EXPRESS WARRANTY, INCLUDING INCIDENTAL, SPECIAL OR CONSEQUENTIAL
DAMAGES, OR LOSS OF ANTICIPATED PROFITS OR BENEFITS.
Table of Contents
Section 1: Getting Started ..............................................4
Section 5: Entering Text ............................................... 33
Understanding this User Manual . . . . . . . . . . . . . . . . . . . . . . . . 4
Installing the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Charging the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Activating Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Memory Card (Optional) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Built-in QWERTY Keypad . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Changing the Text Entry Mode . . . . . . . . . . . . . . . . . . . . . . . . 33
Using T9® Mode (Phone Keypad Only) . . . . . . . . . . . . . . . . . . 34
Using Abc Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Entering Numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Entering Symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Section 2: Understanding Your Phone ...........................9
Features of Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Closed View of Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Open View (Front) of Your Phone . . . . . . . . . . . . . . . . . . . . . . . 11
Closed Rear View of Your Phone . . . . . . . . . . . . . . . . . . . . . . . 12
Command Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Understanding the Display Screen . . . . . . . . . . . . . . . . . . . . . 14
Your Phone’s Modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Section 3: Call Functions ............................................. 19
Making a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Answering a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Section 4: Menu Navigation ......................................... 31
Menu Navigation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Menu Shortcuts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Navigation Key Shortcuts . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Navigate Using a Shortcut . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
1
Section 6: Understanding Your Contacts .................... 36
Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Finding a Contacts Entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Adding a New Contacts Entry . . . . . . . . . . . . . . . . . . . . . . . . . 38
Editing a Contacts Entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Saving a Number After a Call . . . . . . . . . . . . . . . . . . . . . . . . . 42
Speed Dial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Contacts Groups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Deleting a Contacts Entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Memory Info . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Section 7: Messaging ................................................... 49
Types of Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Create and Send Text Messages . . . . . . . . . . . . . . . . . . . . . . 49
Receive Text Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Send Picture Messages in Camera Mode . . . . . . . . . . . . . . . . 50
Send Picture Messages in Standby Mode . . . . . . . . . . . . . . . . 52
Receive Picture Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Message Boxes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Erase Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Message Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Section 8: Browser ....................................................... 62
Browser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Launching Browser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using Browser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using Links . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
How Browser Keys Work . . . . . . . . . . . . . . . . . . . . . . . . . . . .
62
62
62
63
63
Section 9: Games & Apps ............................................. 64
Finding Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Section 10: Camera ...................................................... 65
Activating Your Camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Taking Pictures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Camera Screen Layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Saving Pictures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Camera Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Brightness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
The Photo Gallery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Point, Click, and Send Pictures . . . . . . . . . . . . . . . . . . . . . . . .
65
65
67
68
69
73
73
73
74
Section 11: Multimedia ................................................ 76
Accessing Multimedia . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
My Images . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using Your Music Player . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
My Ringtones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
76
76
77
80
My Sounds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
Section 12: Tools .......................................................... 84
Tools Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Bluetooth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Calendar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Memo Pad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Alarm Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
World Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Calculator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Stop Watch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Converter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Tip Calculator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
84
84
86
87
88
89
90
91
91
93
Section 13: Voice SVC .................................................. 95
Launching Voice Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
Voice Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
Voice Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
Section 14: Changing Your Settings .......................... 100
Accessing Your Settings . . . . . . . . . . . . . . . . . . . . . . . . . . .
Location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Display Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Sound Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Call Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Phone Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Memory Info . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Phone Info . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
100
100
100
103
104
106
112
116
2
Section 15: Health and Safety Information ............... 119
Health and Safety Information . . . . . . . . . . . . . . . . . . . . . . . . 119
Samsung Mobile Products and Recycling . . . . . . . . . . . . . . . 120
UL Certified Travel Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . 120
Consumer Information on Wireless Phones . . . . . . . . . . . . . . 121
Road Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126
Responsible Listening . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128
Operating Environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129
Using Your Phone Near Other Electronic Devices . . . . . . . . . 130
FCC Hearing-Aid Compatibility (HAC) Regulations for
Wireless Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130
Potentially Explosive Environments . . . . . . . . . . . . . . . . . . . . 132
Emergency Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132
FCC Notice and Cautions . . . . . . . . . . . . . . . . . . . . . . . . . . . 133
Other Important Safety Information . . . . . . . . . . . . . . . . . . . . 134
Product Performance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134
Availability of Various Features/Ring Tones . . . . . . . . . . . . . . 135
Battery Standby and Talk Time . . . . . . . . . . . . . . . . . . . . . . . 135
Battery Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135
Care and Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137
Section 16: Warranty Information ............................. 138
Standard Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . 138
Index ............................................................................ 142
3
Section 1: Getting Started
This section explains how to start using your SCH-r450 phone by
activating your service, setting up your Voicemail, or getting an
understanding of how this manual is put together.
Understanding this User Manual
The chapters of this guide generally follow the same order as the
menus and sub-menus in your phone. A robust index for quick
reference to most features begins on page 142.
Also included is important safety information that you should
know before using your phone. Most of this information is near
the back of the guide, beginning on page 119.
Notes and Tips
Throughout this guide there is text that is set apart from the rest.
These are intended to point out important information, quick
methods for activating features, to define terms, and more. The
definitions for these methods are as follows:
• Notes: Explain alternative options within the current feature, menu, or
sub-menu.
• Tips: Provide quick or innovative methods for performing functions
related to the subject at hand.
• Important: Points out important information about the current feature
that could affect performance, or even damage your phone.
Text Conventions
This manual provides condensed information about how to use
your phone. To make this possible, the following terms and icon
appear in place of repeatedly-used procedural steps:
highlight Use the Navigation key (
) to move a highlighting
effect onto a menu item or screen item of interest.
OK
select
➔
After “highlighting” a menu item or screen item,
press the OK key OK to launch, access, or save a
highlighted menu item or screen field of interest.
Used in place of “select” in long “drill down”
procedure steps.
Example: “...Settings ➔ Call Settings ➔ Call Answer...”
Installing the Battery
Note: Your phone comes packaged with a partially charged rechargeable
standard Li-Ion battery and travel adapter.
Important!: You must fully charge the battery the first time you use your
phone, otherwise you could damage the battery.
Getting Started
4
1.
Insert the top end of the
2.
Press down on the battery
battery first, matching the
cover release latch (1) and lift
gold contacts on the inside
the cover (2) up at the top
of the battery to those on the
and away from the phone.
phone.
2.
Press lightly on the bottom end of the battery down into
the phone until it slips into place.
3.
Press lightly down and
3.
Lift the battery (3) up and
away from the phone,
4
bottom end first.
inward on the bottom of the
3
battery cover.
4.
Charging the Battery
Press lightly on the top end
of the battery down over the
3
battery until it clicks into
place.
Remove the Battery
1.
5
Press and hold the
key to turn off the phone (if on).
Your phone is powered by a rechargeable standard Li-Ion battery.
Only use Samsung-approved charging devices and batteries.
Samsung accessories are designed to maximize battery life. Use
of other accessories may invalidate your warranty and may
cause damage.
Use the Travel Adapter
Low Battery Indicator
The travel adapter included
with your phone is a
convenient, light-weight
charger that rapidly charges
your phone from any 120/220
VAC outlet.
1.
The battery indicator (
) in the upper-right corner of the
display indicates power level. Monitor the battery strength and
ensure your battery is adequately charged.
• Three bars (
) indicate a full charge.
• An empty battery icon (
) indicates a near empty battery.
• A blinking empty battery icon (
) and a tone sounding indicate you
have two to three minutes before the battery is too low to operate the
phone.
Plug the large end of the Travel Adapter into a standard
120 VAC or 220 VAC wall outlet.
Important!: For connection to an electrical supply not located in North
America, you must use an adaptor of the proper configuration for
the power outlet. Use of the wrong adapter could damage your
phone and void your warranty.
2.
Insert the smaller end of
the Travel Adapter into the
If you continue to use your phone without charging its battery, the
phone will shut down.
Activating Your Phone
Contact your Wireless Carrier and follow their instructions for
obtaining service, if necessary. We suggest that you read this
guide to fully understand the services your phone supports.
Turning Your Phone On
charger/accessory
+
connector at the bottom
1.
Press and hold the
key until the display lights.
Incorrect
end of your phone.
Correct
Important!: You must unplug the adapter before removing the battery from
the phone during charging to avoid damage.
Note: As with any other radio-transmitting device, do not touch the antenna
while using your phone as this can affect call quality and can cause the
phone to operate at a higher power level than is necessary.
2.
The phone begins searching for a network signal.
Getting Started
6
3.
Once the phone finds a signal, the time, date, and day
2.
appear near the top of the display.
4.
mail box.
You’re now ready to place and receive calls.
Note: If you are outside of your carrier’s coverage or roaming area, the No
Service icon (
) appears at the top of the phone’s display. If you
cannot place or receive calls, try later when service is available, or at
another location.
Listen to Voicemail
1.
Press and hold the
key for two or more seconds.
Your phone powers off.
Note: If your phone is on and you press
for less than one second, the
phone will not power off. This prevents your phone from being turned
off accidentally.
In standby mode, press and hold the
you will hear your voice greeting.
You are prompted to enter your password.
Memory Card (Optional)
Your phone has a Memory Card slot on its right side, behind the
battery cover. You can install a microSDTM card to provide
additional memory for storing files (such as, sound files and
photos) in your phone.
Install a Memory Card
Setting Up Your Voicemail
Voicemail allows callers to leave voice messages, which can be
retrieved any time.
1.
Open the battery cover from the back of your phone. (For
more information, refer to Step 2 of “Remove the Battery”
on page 5.)
Note: Once your Voicemail account has been set up, you can use the
Voicemail folder (under the Message menu) to view details of voice
messages in your Voicemail box.
1.
In standby mode, press and hold the
own mobile number to dial Voicemail.
7
key or dial your
own mobile number to dial Voicemail. After connecting,
2.
Turn Your Phone Off
䊳
Follow the prompts in the new user tutorial to setup your
key or dial your
2.
Insert the memory card — label side facing up and smaller
2.
end pointing toward the phone — into the memory card
slot.
Press the memory card up into the slot until the card lock
releases.
3.
Remove the memory card from the memory card slot.
4.
If desired, install another memory card. (For more
information, refer to “Install a Memory Card” on page 7.)
5.
3.
Replace the battery cover.
Press the memory card up into the slot until the card locks
into place.
4.
Replace the battery cover.
Remove a Memory Card
1.
Open the battery cover from the back of your phone. (For
more information, refer to Step 2 of “Remove the Battery”
on page 5.)
Getting Started
8
Section 2: Understanding Your Phone
This section outlines some key features of your phone. It also
describes the screen format and the icons that will be displayed
when the phone is in use.
Closed View of Your Phone
Features of Your Phone
• Domestic and international voice and text messaging service (available
on participating networks).
• High speed data (CDMA 2000 1x Technology)
• Bluetooth® Wireless Technology (see Note)
• Global Positioning (GPS) Technology
• PIM Functions
• Picture (MMS) Messaging
• Text (SMS) Messaging
• E-mail Messaging
• QWERTY Keypad
• Built-in VGA Digital Camera
• Voice Dial
• Speakerphone
Features
1.
Volume Key — Lets you adjust the ring volume in standby
mode, adjust the voice volume during a call, or mute the
Note: The SCH-r450 supports the wireless handsfree profile and the serial
port profile for Bluetooth® wireless technology. The SCH-r450 does
not support Bluetooth OBEX profiles.
9
ringer during an incoming call.
2.
Left Soft Key — Used to navigate through menus and
applications and to select the choice indicated at the
bottom left corner of the Main LCD.
3.
Speakerphone Key — Lets you enable/disable
speakerphone mode.
4.
SEND Key — Lets you place or receive a call. In standby
mode, press the key once to access the recent call log.
5.
Alpha-numeric Keys — Use these keys to enter
numbers, letters, and characters.
6.
Earpiece / Speaker — Lets you hear ringing and alert
tones, alarm tones, and the other parties to calls.
7.
8.
Display — Indicates the status of your phone, including
account to review your voice messages.
11. Special Function Keys — Enter special characters.
Performs various functions.
12. Microphone — Lets the other party to a call hear you
clearly when you are speaking to them.
13. Power/Accessory Connector — Used to plug in charging
accessories and to connect a headset or any available
accessory cables to your phone.
14. Right Soft Key — Used to navigate through menus and
applications and to select the choice indicated at the
bottom right corner of the Main Display.
numbers dialed, feature and function screens, status
15. CLR Key — Deletes characters from the display when you
icons, message indicators, signal strength, and so on.
are in text entry mode. Press this key to return to the
OK Key — Pressing when navigating through a menu
previous menu or screen when navigating features on your
accepts the highlighted choice in a menu.
9.
10. Voicemail Key — Lets you speed dial your Voicemail
Navigation Key — In Menu mode, lets you scroll through
phone.
16. END Key — Ends a call. If you press and hold the END key,
the phone menu options. In Standby mode, lets you access
the power goes On or Off. When you receive an incoming
preset functions.
call, press to send the call to voicemail.
Understanding Your Phone
10
17. Camera – Music Player Key — Launches the Camera or
the Music Player feature of your phone.
Features
1.
holding this key launches VoiceSignal options.
Earpiece / Speaker — Lets you hear ringing and alert
tones, alarm tones, and the other parties to calls.
18. Voice Recognition Key — In standby mode, pressing and
2.
Open View (Front) of Your Phone
Display — Indicates the status of your phone, including
numbers dialed, feature and function screens, status
icons, message indicators, signal strength, and so on.
3.
soft1 Key — Left soft key — Used to navigate through
menus and applications and to select the choice indicated
at the bottom left corner of the Main LCD.
4.
shift Key — Toggles ABC mode capitalization between
ABC, Abc, and abc.
5.
Messaging Key — Launches the Messages menu.
6.
Fn Key — Text Function Key — Toggles text entry mode
between ABC and 123 modes.
7.
space Key — Inserts a space character in a text entry.
8.
Arrow (Navigation) Keys — In Menu mode, lets you
scroll through the phone menu options. In Standby mode,
lets you access preset functions and one user-defined
function.
11
9.
soft2 Key — Right soft key — Used to navigate through
Closed Rear View of Your Phone
menus and applications and to select the choice indicated
at the bottom right corner of the Main Display.
10. OK Key — When navigating through a menu accepts the
highlighted choice in a menu.
11. Back/Clear Key — Deletes characters from the display
when you are in text entry mode. Press this key to return to
the previous menu or screen when navigating features on
your phone.
12. Speakerphone Key — Lets you enable/disable
speakerphone mode.
13. SEND Key — Lets you place or receive a call. In standby
mode, press the key once to access the recent call log.
14. END Key — Ends a call. If you press and hold the END key,
the power goes On or Off. When you receive an incoming
call, press to send the call to voicemail.
1.
Headset Connector — Used to connect a headset or TTY
device to your phone. (For more information, refer to “TTY
Mode” on page 105.)
2.
Speaker Grill — Lets you hear ringing and alert tones,
alarm tones, and the other parties to calls.
Understanding Your Phone
12
3.
Camera Lens — The lens of your built-in camera.
• When the Left soft key function is Edit, press the Edit (left) soft key
4.
Mirror — Lets you position the Camera Lens to take self
portraits.
5.
Camera – Music Player Key — Launches the Camera or
the Music Player feature of your phone.
6.
Battery Cover — Lets you access your phone’s battery.
7.
Volume Key — Lets you adjust the ring volume in standby
mode, adjust the voice volume during a call, or mute the
ringer during an incoming call.
8.
Battery Cover Release Latch — Lets you remove the battery
cover.
Command Keys
Functions for the soft keys are defined by what appears above
each in the display. There are two soft keys, the Left soft key
(
or
) and the Right soft key (
or
).
Left Soft Key
Some functions of the Left soft key are as follows:
• In standby mode, press the Settings (left) soft key (
open the Settings menu.
13
or
) to
(
or
) to edit a Contact.
Right Soft Key
Some functions of the Right soft key are as follows.
• In standby mode, press the Contacts (Right) soft key (
or
) to
launch the Contacts Find screen.
• When the Right soft key function is Options, press the Options (right)
soft key (
or
) and a pop-up menu appears.
• When the Right soft key function is Back, press the Back (right) soft
key (
or
) to back up one menu level.
OK Key
• In standby mode, press the Menu key ( OK or
) to launch the Main
Menu.
• In a menu, press the OK key ( OK or
) to accept the highlighted
selection.
• In camera mode, press the OK key ( OK or
) to take a photo or to
create a Picture message.
• When the OK key function is Edit, press the Edit (OK) key ( OK or
)
to edit a Draft message.
Clear Key
The C/Back Arrow key ( or
) is used to erase or clear
numbers, text, or symbols from the display. You can also use the
or
key to return to a previous menu.
• If you enter an incorrect character, briefly press
or
to
backspace (and delete) the character.
• To erase the entire sentence, press and hold
or
.
• To back up one menu level, briefly press
or
.
End Key
• Press and hold the End key
to turn on your phone.
• Briefly press
once to disconnect a call.
• Press
to return to standby mode from any menu, or to cancel the
last input.
Camera – Music Player Key
Use the Camera-Music Player key (
) on the right side of
the phone in standby mode to:
• Press and hold to activate the camera built into your phone. In Camera
mode, press to take pictures.
• Press to activate the Music Player.
Understanding the Display Screen
1.
The top line of your
1
phone’s display contains
Send Key
icons that indicate
The Send key
is used to answer calls, dial calls, and to
recall the last number(s) dialed, received, or missed.
• Press
once to answer calls.
• Enter a number and briefly press
to make a call.
• Briefly press
in standby mode to display a list of recent calls to
and from your phone.
• Press
twice in standby mode to call the most recent number.
• Press
to pick up a waiting call. Press
again to switch back
to the other call.
network status, battery
power, signal strength,
2
connection type, and
more.
2.
The center portion of the
3
display shows
information such as call progress information, messages,
and photos.
Navigation Key
Use the directional keys on the Navigation key
to browse
menus, sub-menus, and lists. Each directional key also acts as a
shortcut to launch applications.
OK
Understanding Your Phone
14
3.
The bottom line of the display shows current soft key
functions. The sample screen shows that pressing the Left
soft key (
or
) will display the Settings menu and
pressing the Right soft key (
or
) will show the
Contacts Find screen.
With the QWERTY
keypad open, the
display rotates
automatically
from portrait
mode (as shown
above) to
landscape mode
(as shown here).
1
2
3
Display Screen Icons
Your SCH-r450 phone can show you definitions of the icons that
appear on the top line of the display.
To access the Icon Glossary:
䊳
In standby mode, press the Menu key ( OK ), then press
(for Settings),
(for Phone Info), and
for Icon Glossary. A list appears showing all of
15
the icons that can appear on the top line of the display.
Dialogue Boxes
Dialogue boxes prompt for action, inform you of status, or warn
of situations such as low battery. Dialogue boxes and their
definitions are outlined below.
• Choice
• Example: “Save Message?”
• Reconfirm
• Example: “Erase All Messages?”
• Performing
• Example: “Sending...” “Connecting...”
• Completed
• Example: “Message Saved”
• Information
• Example: “New Message”
• Error
• Example: “System Error!”
• Warning
• Example: “Low Battery,” “Memory Full!”
Backlights
Backlights illuminate the display and the keypad. When you press
any key or open the phone, the backlights come on. They go off
when no keys are pressed within a period of time set in the
Backlight menu.
Note: During a phone call, the display backlight dims and turns off after 10
seconds to conserve battery power, regardless of the Backlight setting.
For more information, refer to “Backlight” on page 102.
Your Phone’s Modes
Call Answer Mode
You can choose to answer a call by pressing any key except the
key or
key, or by pressing only the
key. (For
more information, refer to “Call Settings” on page 104.)
Input mode
Input mode determines how you enter text, numbers, and
symbols. While at any text entry screen, press the Left soft key
(
or
), then choose the input mode from the pop-up
menu using the Navigation key. Optional input modes are T9
Word, Abc, ABC, Symbol, and 123. (For more information, refer
to “Entering Text” on page 33.)
Note: With the QWERTY keypad open, T9 Word is not available. Also, use
123 mode instead of Symbol to enter symbols and punctuation in your
text.
Tip: With the phone closed, you can also cycle between T9 Word, Abc, and
123 by repeatedly pressing and holding the
key until the phone
beeps.
Lock Mode
When the phone is in Lock Mode, restrictions are placed on
phone use. You can receive calls and messages, but cannot place
outgoing calls (except for emergency numbers) until you unlock
the phone. Lock Mode also restricts access to menus and the
volume key. Unlock your phone by entering the lock code when
prompted. (For more information, refer to “Change Lock” on
page 108.)
Standby Mode
Standby mode is the state of the phone once it has found service
and is idle. The phone goes into standby mode:
• After you power the phone on.
• When you press
after a call or from within a menu.
In standby mode, you will see the time, day, and date as well as
all phone status icons.
Understanding Your Phone
16
Place Calls in Standby Mode
1.
While in standby mode, enter a phone number, and press
2.
Press
to place a call.
to return to standby mode.
Receive Messages in Standby Mode
You can receive messages in standby mode. An alert tone sounds
and a notification message appears in the display when a new
message arrives. The following call message options appear:
• View Now — This selection allows you to view the messages
now.
• View Later — This selection allows you to view the messages at a
later date.
䊳 Highlight the desired viewing option and then press OK .
Talk Mode
You can place and receive calls only when your phone is on.
While in a call your phone is in talk mode. Press the Options soft
key to display a list of menu options. (For more information, refer
to “In-Use Menu” on page 25.)
Speakerphone Mode
To use your phone handsfree or to share a call with other people
nearby, place your phone in Speakerphone Mode by pressing and
17
holding the Speakerphone key (
appears in the display.
) until “Speakerphone On”
Caution!: Keep the phone away from you ear while in Speakerphone Mode. (For
more information, refer to “Responsible Listening” on page 128.)
To disable Speakerphone Mode, press and hold
“Speakerphone Off” appears in the display.
until
Note: Your phone automatically enters Speakerphone Mode when you dial a
call using the QWERTY keypad and the called phone begins ringing.
Enter/Exit Silent Mode
Silence the tones your keypad makes when you press a key.
• To enter Silent Mode:
䊳
In standby mode, press and hold
. “Entering Silent
Mode” briefly appears in the display and your phone
returns to standby mode.
• To exit Silent Mode:
䊳
While in Silent mode and standby mode, press and hold
. “Exit Silent Mode” briefly appears in the display
and your phone returns to standby mode.
Vibrate Mode
䊳
Camera Mode
In standby mode, repeatedly press the volume key
(
Camera mode lets you activate your phone’s camera to take
pictures. In Camera mode, you can also adjust the resolution and
appearance of your pictures.
) down until Vibrate appears in the display.
The volume key is on the upper right side of phone.
Adjust the Ringer
1.
In standby mode, press the volume key (
) on the
right side of the phone up or down. Options are:
•
•
•
•
2.
Ringer Off
Vibrate
Low
Low/Medium
•
•
•
•
Medium
Medium/High
High
Vibrate/High
When you are satisfied with the setting, press the
OK
For more information, refer to “Multimedia” on page 76.
• Entering Camera Mode — In standby mode, press the Camera/Music
Player key (
) down and hold it — on the right side of the
phone.
• Exiting Camera Mode — Press the
key.
key.
Your phone returns to standby mode.
Tip: You can also enter the Volume > Voice Calls sub-menu by pressing the
Menu key ( OK ), then pressing the
,
,
, and
keys. Use the Volume key on the right side of your phone to adjust the
ringer volume setting.
Note: The Vibrate icon (
) appears in the display when the phone is in
Vibrate mode. The Vibrate/Ring icon ( ) appears in the display
when the phone is in Vibrate/High mode.
Understanding Your Phone
18
Section 3: Call Functions
This section provides procedures for making and answering
calls. This section also describes features, such as call logs and
call timers, that help you make calls and manage your call time.
Note: You can define up to 3 emergency numbers in your phone. (For more
information, refer to “Emergency #” on page 108.)
2.
Note: Although the procedures in this section are written for the phone
keypad, you can also perform these procedures using the QWERTY
keypad.
Making a Call
1.
With the phone on, enter the number you wish to call using
the keypad.
2.
Press
to place the call.
Emergency Calls
When you call an Emergency Number, such as 911, your SCHr450 phone locks itself in emergency mode, only allowing you to
make calls to the emergency call center you originally contacted.
This enables emergency operators to more easily dispatch aid,
such as police, fire fighting, and emergency medical personnel.
1.
With the phone on, enter the Emergency Number you wish
to call using the keypad.
19
Press
to place the call.
Tip: If you need to make an emergency (911) call with Airplane mode
enabled, just dial the emergency number and press
. (For more
information, refer to “Airplane Mode” on page 106.)
Three-way Calling
Call two other numbers and connect them to your call using
three-way calling.
1.
In standby mode, enter the number for the first party in
your call, then press
2.
.
When connected, ask the other party to remain on the line.
Press
to place them on hold.
3.
Enter the second party’s phone number and press
4.
When the second party answers, press
three parties.
.
to connect all
Manual Pause Calling
1-Touch Dialing
To manually call a number with pause(s) without storing it in your
Contacts list:
1.
In standby mode, enter the number you wish to call.
2.
Press the Options soft key. The following pause options
Use 1-touch dialing to speed dial Contacts from 1 (Voicemail)
through 9.
䊳
In standby mode, press and hold the number key
corresponding to the desired Contact’s speed dial number.
appear in the display:
• 2-Sec Pause — A 2-second pause after which dialing resumes.
• Wait — A hard pause (waits for input from you).
3. Use the Up/Down navigation or arrow keys to highlight the
desired pause.
4.
Press the
OK
key or
Example: To speed dial the Contact assigned speed dial 5, press and hold the
key or the
key.
2-Touch Dialing
Use 2-touch dialing to speed dial Contacts from 10 through 99.
key to enter the highlighted pause
1.
5.
Press
dial number.
to call the number.
2.
Tip: Press the Save soft key to store pauses along with the number if you
plan to call the number frequently.
Speed Dialing
In standby mode, press and release the number key
representing the first digit of the desired Contact’s speed
into the number sequence.
Press and hold the number key representing the second
digit of the desired Contact’s speed dial number.
Example: To speed dial the Contact assigned speed dial 35, press
then press and hold the
key or the
key.
or
Speed Dialing lets you place a call to any Contact stored in your
Contacts list by dialing the Contact’s Location number.
Call Functions
20
3-Touch Dialing
Use 3-touch dialing to speed dial Contacts from 100 through 999.
1.
In standby mode, press and release the number key
representing the first digit of the desired Contact’s speed
dial number.
2.
Press the number key representing the second digit of the
desired Contact’s speed dial number.
3.
Press and hold the number key representing the third digit
of the desired Contact’s speed dial number.
Example: To speed dial the Contacts entry assigned to speed dial 325, press
or
, press
or
, then press and hold the
key or the
key.
Voice Dialing
The voice recognition capabilities of your SCH-r450 are
exceptional due to advanced, speaker-independent technology.
This means you do not need to “train” your phone to understand
your voice. You can use your voice in a natural manner to dial
numbers.
Note: End Calls Before relaunching the VoiceSignal voice recognition
software — When you use Voice Dialing to make a call, you must end
that call before you can use other Voice Commands. For more
information, refer to “Voice SVC” on page 95.
Use the Call command to dial any number stored in your
Contacts list by saying the name of the contact (Name Dialing).
You can also use Call to dial any telephone number, even
numbers not stored in your contact list, by speaking the
individual digits in the number (Digit Dialing).
Voice Dialing Tips:
• Wait for the beep before speaking.
• Speak clearly at a normal volume, as if you were talking to someone
on the phone.
• When saying a name, say the first name then the last name.
Dialing a Name
To dial a name, do the following:
1.
In standby mode, press and hold the
key or the
key.
“Say a Command” appears in the display and is
pronounced through the earpiece.
2.
Say, “Call”.
You are prompted to “Say the name or number”.
21
3.
Speak clearly and say the name of a person in your
• “Mobile 2”
Voice Dial dials the specified number.
Contacts list, first name followed by last name.
If the name is recognized, Voice Dial repeats the name and
dials the number.
If Voice Dial is not sure which name you said, it displays a
4.
Dialing a Number
To dial a number using Voice Dial, do the following:
1.
key or the
choice list of up to three names and prompts you with “Did
key.
you say?” followed by the first name on the list.
“Say a Command” appears in the display and is
Say “Yes” to confirm the name or “No” to hear the next
pronounced through the speaker.
name, or use the keypad to select the correct name from
2.
the list. (For more information, refer to “Voice SVC” on
page 95.)
5.
In standby mode, press and hold the
Say “Call”.
VoiceSignal prompts you to “Say the name or number.”
3.
Speak clearly and say the telephone number of the person
• Press the Repeat soft key to say the name again.
• Press
to exit VoiceSignal without dialing.
If the recognized name has multiple numbers stored for it
you want to call.
(that is, Mobile, Work, Home, and so on), Voice Dial
If it recognizes the number, Voice Dial repeats it and dials
displays the possible choices and prompts you with
the number. If Voice Dial is not sure it has recognized the
“Which number?”
number, it displays a choice list of up to three numbers and
Say one of the following number types:
• “Home”
• “Work”
• “Mobile 1”
For example, say “7 8 1 9 7 0 5 2 0 0."
prompts you with “Did you say?” followed by the first
number on the list.
Call Functions
22
4.
Say “Yes” to confirm the number or “No” to hear the next
one, or use the keypad to select the correct number from
the list. (For more information, refer to “Voice SVC” on
Tip: Assign pictures to Contacts entries. The entry’s assigned picture
appears in the display when you receive a call from that entry. For more
information, refer to “Assigning a Picture to a Contacts Entry” on
page 41.
page 95.)
• Press the Repeat soft key to say the name again.
• Press
to exit VoiceSignal without dialing.
Pause Dialing From a Contacts Entry
• If you voice dial a contact that contains 2-Sec Pause(s) simply wait for
the pauses to pass and the dialing to complete.
• If you voice dial a contact that contains Wait(s), wait for the appropriate
prompt(s) from the number you are calling (credit card number, bank
account number, and so on) and enter the appropriate response(s).
Answering a Call
Incoming
When you receive a call, the phone displays one of the following:
• If the caller can be identified, the caller’s number (or name if it’s in your
Contacts) appears in the display.
• If the caller cannot be identified, Call from unavailable #, Call from
restricted #, or no number appears in the display.
The phone continues to notify you of the call until one of the
following events occur:
• You answer the call.
• The calling party ends the call.
• The call is sent to voicemail.
Call Notification Features
Your phone notifies you of a call in a variety of ways.
• Eight ring volume settings: Ringer Off, Vibrate, Low, Low/Medium,
Medium, Medium/High, High, or Vibrate/High.
• Different ring types or melodies to distinguish callers.
• Name display with caller ID. (If the caller’s name is programmed into
your Contacts).
• Information about the last 90 each of incoming, missed, and outgoing
calls are automatically stored to a call log.
Set Call Ringer Volume
1.
In standby mode, press the Volume key on the right side of
the phone.
23
2.
Press the Volume key up or down to set the call ringer
1.
Adjust the Ringer
1.
Tip: You can also carry out this procedure using the QWERTY keypad.
In standby mode, press the Volume key (
) on the
The following options appear in the display:
right side of the phone up or down. Options are:
•
•
•
•
2.
Ringer Off
Vibrate
Low
Low/Medium
Press
OK
In standby mode, press Menu, then select Settings ➔
Call Settings ➔ Call Answer.
volume as desired.
•
•
•
•
Medium
Medium/High
High
Vibrate/High
• Any Key — Pressing any key on either keypad except
,
, or the Ignore soft key answers a call.
• Send Key — Only pressing
answers a call.
2. Use the Up/Down navigation keys to highlight the Call
Answer option of your choice.
once you’re satisfied with the setting. The phone
returns to standby mode.
Tip: You can also enter the Volume > Voice Calls sub-menu by pressing the
Menu key ( OK ), then pressing the
,
,
, and
keys. Use the Volume key on the right side of your phone to adjust the
ringer volume setting.
3.
Call Answer
OK
to activate the method for answering calls.
If you’re on a call, your phone beeps when another call is
incoming. Contact your Wireless Carrier for availability.
1.
Note: The Vibrate icon (
) appears in the display when the call ringer is
set to Vibrate. The Vibrate/Ring icon (
) appears in the display
when the call ringer is set to Vibrate/High.
Press
Call Waiting
Press
to connect and ask the calling party to remain
on the line.
2.
Press
and the second caller is placed on hold and
you’re returned to the original caller.
3.
Press
to alternate between calls.
Select from two methods for answering calls. This option can be
changed in the Settings menu.
Call Functions
24
Caller ID
1.
Caller ID lets you identify who is calling you by displaying a
caller’s number. If the caller’s name and number are stored in
Contacts, the caller’s name also appears. If you’ve assigned a
picture to the entry, it appears in the display as well.
Call Block
You can prevent your number from displaying on another phone’s
caller ID screen by enabling Call Block.
1.
In standby mode, enter
2.
Enter the number you wish to call, then press
,
,
.
.
Silence an Incoming Ring
During an incoming call, any of the following keys can be
pressed to silence the ringer:
• The up or down volume key (
) on the right side of the phone.
Ignore an Incoming Call
Ignored calls are immediately forwarded to Voicemail.
䊳
During an incoming call, press the Ignore soft key. The
incoming call is forwarded to Voicemail.
In-Use Menu
You can access a number of menus and features even while in a
call.
25
While in a call, press the Mute/Unmute soft key to disable/
enable the microphone.
2.
While in a call, press the Options soft key. The following
options appear in the display:
•
•
•
•
Message — Display the Messages menu.
Contacts — Display the Contacts menu.
Recent Calls — View your recent calls log.
Send DTMF — Send your phone number as DTMF tones to the
other person on the call.
• Voice Privacy — When set to Enhanced, the phone sounds an
audible beep when you loose privacy (encryption) on a CDMA
connection. For this option to work correctly, you must have the
Enhanced privacy option enabled in the Security settings. (This
option is enabled by default.)
• Location — Turn your GPS location on or set GPS location for
emergency calls only.
3. Within the above menu list, do one of the following:
• Use the navigation key to highlight a menu or feature. Press OK to
open the highlighted menu or to activate the highlighted feature.
• Press the Cancel soft key to exit the menu.
Calls
Your phone has Call Logs that retain information about Outgoing,
Incoming, and Missed Calls. The Calls menu lets you access this
information for future reference, to return calls, and to add new
Contacts. You can also view times for your last call and the total
of all calls.
Tip: To quickly view a list of your most recent calls (outgoing, incoming, and
missed), briefly press the
key in standby mode. The All Calls
screen listing to 270 of your most recent calls appears in the display.
option.
Outgoing Calls
5.
The last 90 outgoing calls are stored in the Outgoing calls log.
Review the Outgoing calls log for the time and date of a call, as
well as other information.
1.
In standby mode, press Menu, then select Calls ➔
Outgoing Calls. A list of your outgoing calls appears in the
3.
OK
the display:
to perform the highlighted option’s function.
In standby mode, press Menu, then select Calls ➔
Incoming Calls. A list of your Incoming calls appears in
the display.
to view further information about the call.
Press the Options soft key. The following options appear in
OK
The last 90 Incoming calls are stored in your phone’s Incoming
call log. You can review the Incoming call log for time and date of
the call, as well as other information.
Use the Up and Down navigation keys to highlight a call,
then press
Press
Incoming Calls
1.
display.
2.
• Details — Contacts calls only — Lets you view the Contacts entry
for the recipient of this call.
• Erase — Erase the selected call from your Outgoing call list.
• Lock/Unlock — Blocks/permits erasure of the selected call from
your Outgoing call list.
• Erase all — Erase all unlocked calls from your Outgoing call list.
• View Timer — Call Timer screen appears in the display listing the
number and types of calls and their total durations. (See “Call
Timer” on page 28 for more information.)
4. Use the Up and Down navigation keys to highlight an
2.
Use the Up and Down navigation keys to highlight a call,
then press
OK
to view further information about the call.
• Save — Save the number to your Contacts.
Call Functions
26
3.
Press the Options soft key to display a pop-up menu
2.
containing the following options:
• Save — Save the number to your Contacts.
• Details — Contacts calls only — Lets you view the Contacts entry
for the originator of this call.
• Erase — Erase the selected call from your Incoming call list.
• Lock/Unlock — Blocks/permits erasure of the selected call from
your Incoming call list.
• Erase all — Erase all unlocked calls from your Incoming call list.
• View Timer — Call Timer screen appears in the display listing the
number and types of calls and their total durations. (See “Call
Timer” on page 28 for more information.)
4. Use the Up and Down navigation keys to highlight an
option.
5.
Press
OK
to perform the highlighted option’s function.
then press
3.
1.
In standby mode, press Menu, then select Calls ➔
Missed Calls. A list of your missed calls appears in the
display.
27
OK
to view further information about the call.
Press the Options soft key to display a pop-up menu that
contains the following options:
• Save — Save the number to your Contacts.
• Details — Contacts calls only — Lets you view the Contacts entry
for the originator of this call.
• Erase — Erase the selected call from your Missed call list.
• Lock/Unlock — Blocks/permits erasure of the selected call from
your Missed call list.
• Erase all — Erase all unlocked calls from your Missed call list.
• View Timer — Call Timer screen appears in the display listing the
number and types of calls and their total durations. (See “Call
Timer” on page 28 for more information.)
4. Use the Up and Down navigation keys to highlight an
option.
Missed Calls
The last 90 missed calls (calls not picked up) are stored in the
Missed call log. Review the Missed call log for the time and date
of the call, as well as other information.
Use the Up and Down navigation keys to highlight a call,
5.
Press
OK
to perform the highlighted option’s function.
Erase Logs
You can erase Outgoing, Incoming, Missed, or All Calls.
Erase All Calls
1.
In standby mode, press Menu, then select Calls ➔ All
Calls. The All Calls list appears in the display.
2.
Press the Options soft key to display a pop-up menu that
1.
contains the following options:
• Save — Save the number to your Contacts.
• Details — Contacts calls only — Lets you view the Contacts entry
for the originator of this call.
• Erase — Erase the selected call from your All Calls list.
• Lock/Unlock — Blocks/permits erasure of the selected call from
your All Calls list.
• Erase all — Erase all unlocked calls from your All Calls list.
• View Timer — Call Timer screen appears in the display listing the
number and types of calls and their total durations. (See “Call
Timer” on page 28 for more information.)
3. Use the Up and Down navigation keys to highlight Erase
all, then press the
4.
OK
key.
“Erase all entries?” appears in the display as well as the
options Yes and No.
5.
Timer. The following options appear in the display:
• Last Call — Shows the duration of your last call.
• Home Outgoing — Shows the number and total duration of all
calls originated by your phone since the last reset.
• Home Incoming — Shows the number and total duration of all
calls made to your phone since the last reset.
• Roaming Calls — Shows the number and total duration of all
calls originated by and made to your phone while roaming and
since the last reset.
• All Calls — Shows the number and total duration of all calls
originated by and made to your phone since the last erasure.
• Last Reset — Shows the date and time you last reset all counters
(except Lifetime Calls).
• Lifetime Calls — Shows the duration of all calls on your phone
since activation (Lifetime timers cannot be reset).
2. Use the Up and Down navigation keys to highlight a
particular timer.
To Erase all calls, press the Yes soft key.
To keep the calls, press the No soft key.
3.
Press the Reset soft key to reset the highlighted timer.
Press the Reset All soft key to reset all of the timers
Call Timer
View the duration of your last call, total calls, and calls made
during the life of your phone using the Call timer feature. Call
timer is not for billing purposes.
In standby mode, press Menu, then select Calls ➔ Call
except Lifetime Calls.
4.
Press
OK
to exit the Call Timer screen.
Call Functions
28
Note: Although Total call timers can be erased, LifeTime call timers can
never be erased.
Data Counter
Use Data Counter to view the amount of data that has been sent
or received (or a total of both) using the data services that your
phone supports. The Data Counter can be a helpful tool for
monitoring data usage, especially if your service agreement has
specified limits.
1.
In standby mode, press Menu, then select Calls ➔ Data
Counter. The following options appear in the display:
• Transmit — Shows the amount of data (in kilobytes) that your
phone has transmitted since last being reset.
• Received — Shows the amount of data (in kilobytes) that your
phone has received since last being reset.
• Total — Shows the amount of data (in kilobytes) that your phone
has transmitted and received since last being reset.
• Last Reset — Shows the date and time you last reset all counters
(except Lifetime Data Counter).
• Lifetime Data Counter — Shows the amount of data (in
kilobytes) that your phone has transmitted and received since being
activated.
2. To reset a timer other than Lifetime Data Counter, use the
Up/Down navigation keys to highlight the timer you want to
reset and press the Reset soft key.
29
3.
To reset all timers except Lifetime Data Counter, press the
Reset All soft key.
4.
Press
OK
to exit the Data Counter screen.
Note: Although other data counters can be reset, only the Lifetime Data
Counter can never be reset.
Store Numbers from Call Logs
Store numbers from your Outgoing, Incoming, Missed, and All
calls logs to Contacts.
Tip: In standby mode, briefly press
to display the Recent Calls list.
You can then select any call in the list to save to Contacts.
1.
In standby mode, press Menu, then select Calls.
2.
Press the corresponding number on the keypad to view
call logs for the following call types.
•
for Outgoing Calls
•
for Incoming Calls
•
for Missed Calls
•
for All Calls
3. Select the number you wish to store in Contacts.
4.
Press the Options soft key, then select Save.
5.
Select Create New to add the number as a Contacts entry,
or select Update Existing to find a Contact with which to
associate the new number.
6.
Follow the prompts to store the number to Contacts.
Call Functions
30
Section 4: Menu Navigation
This section explains the menu navigation for your phone. It also
includes an outline of all the available menus associated with
your phone.
Note: Although all procedures in this section are written for the phone
keypad, you can also perform these procedures using the QWERTY
keypad.
Access the menus and sub-menus in your phone using the
navigation key (
) and soft keys (
or
), or
use a shortcut.
OK
In standby mode, press Menu ( OK ). The first of several
menus appear in the display.
Note: More than one menu may appear in your display. This setting can be
modified in the Display / Menu Style menu. (For more information,
refer to “Menu Style” on page 101.)
2.
Use the navigation key to browse through the menus.
3.
Press
OK
or
to enter the menu or sub-menu that
appears in the display.
31
Press the Back soft key or the
key to return to the
previous menu.
Return to the Previous Menu
• Press the Back soft key to return to a previous menu.
• When Back does not appear in the display, press
to return to the
previous menu.
Menu Shortcuts
Menu Navigation
1.
4.
Use shortcuts to quickly access menus and sub-menus. Press
the Menu key ( OK ), then press the number to the left of the
menu to jump to the desired menu, sub-menu, or feature.
Example: To jump to the Outbox sub-menu, press Menu ( OK ), then press
(for Messages) and
(for Outbox).
Navigation Key Shortcuts
QWERTY Keypad Shortcuts
QWERTY Keypad Closed
In standby mode and with the QWERTY keypad closed, press a
navigation key to launch the key’s corresponding application in
the pattern shown here.
In standby mode and with the QWERTY keypad open, you have
the option of using the arrow keys on the keypad itself to launch
applications, as shown here.
Messages
Messages
Browser
OK
Browser
Games & Apps
Multimedia
In standby mode and with the QWERTY keypad open, the
navigation key application pattern rotates 90° as shown here.
Messages
OK
Multimedia
Navigate Using a Shortcut
QWERTY Keypad Open
Browser
Games & Apps
Games & Apps
You can also access menus and sub-menus using menu
numbers. Enter the menu number after pressing the Menu key
( OK ) to go directly to the menu or sub-menu of your choice.
Before you can navigate using a shortcut, you’ll need the menu
or sub-menu number that you wish to access.
1.
In standby mode, press Menu ( OK ).
2.
Press the number of the menu, sub-menu, and so on for
the feature that you wish to access.
Multimedia
Example: Press Menu ( OK ), then press
,
. This takes you to the
Tools (Menu 7), and then to the Calendar (sub-menu 2).
Menu Navigation
32
Section 5: Entering Text
This section outlines how to select the desired text entry mode
when entering characters using the phone keypad or the nested,
QWERTY keyboard-style keypad. This section also describes how
to use the T9 predictive text entry system to reduce the number
of key strokes needed to enter text.
Built-in QWERTY Keypad
rotates the image in the display to show information in a wider,
landscape format. Using the QWERTY keypad, you can type
letters, numbers, punctuation, and other special characters into
text entry fields or other applications simpler and faster than
using the telephone keypad.
Note: Two of your phone’s functions (@metro and MetroWEB) call for you to
use the QWERTY keypad. Other functions requiring text entry (such as,
Messaging and Memo Pad) accept text entry from whichever keypad
you prefer.
Display
Changing the Text Entry Mode
Clear
Key
Left Soft
Key
Fn (Input
Mode) Key
Navigation Right
Keys
Soft Key
Your r450 has a built-in, keyboard-style keypad, commonly
called QWERTY, that you can access by sliding it open from
beneath the top section of the phone. This also automatically
33
Text messages can be made up of alphabetical characters,
numbers, and symbols. You can use the following text entry
modes to simplify text entry:
• T9 Word — Press each phone key only once to enter the letter of the
word that you’re spelling. T9 WORD mode letter options are:
– T9 Word — Enter initial capital letters
– T9 WORD — Enter all upper case letters
– T9 word — Enter all lower case letters
Note: T9 Word does not support the QWERTY keypad, which does not need
this function.
• Abc — Enter letters, numbers, and symbols by using the QWERTY
keypad or by repeatedly pressing each phone key until the desired
character (as shown on the key) appears in the display. ABC mode
letter options are:
– Abc — Enter initial capital letters
– ABC — Enter all upper case letters
– abc — Enter all lower case letters
• 123 — Enter numbers by pressing the corresponding keys on the
phone keypad or the QWERTY keypad.
Tip: Using the QWERTY keypad, also use 123 mode to enter symbols into your
message simply by pressing the keys labeled with the symbols you want.
2.
• Symbols
Use the Up and Down navigation keys to highlight the
desired text entry mode, then press
OK
or
.
Using T9® Mode (Phone Keypad Only)
T9 Word recognizes commonly used words for the numeric
sequence of key presses and inserts the word into your message.
T9 Word is much faster than the traditional method of text entry
(Abc) and requires only one key press per letter of the word that
you’re spelling.
1.
While composing a text message, press the Left soft key.
Use the Up and Down navigation keys to highlight T9Word,
• Symbols — Using the phone keypad, enter a symbol into your
message by pressing the number above the symbol in the SYMBOLS
pop-up window.
then press
OK
.
• For practice, enter the word “Samsung” by pressing each of the
following keys only once:
The current text entry mode (T9 Word, Abc, ABC, 123, or
Symbols) is indicated in the lower part of a text entry screen. To
change the text entry mode, do the following:
1.
While composing a text message, press the Left soft key.
S
A
M
S
U
N
G
The following options appear in the display:
•
•
•
•
T9Word
Abc
ABC
123
T9 Word recognizes that the most commonly used word for the
numeric sequence you just entered is “Samsung.” If more than one
word shares the same numeric sequence, T9 Word provides the most
commonly used word. Alternate words, if available, pop-up in the
display. Select the desired word in the pop-up list.
Entering Text
34
• Using the QWERTY keypad, press the key labeled with the
corresponding number that you wish to insert into your message.
• Using the phone keypad, press the key labeled with the
corresponding number that you wish to insert into your message.
Note: To enter a space, press the
key. To enter a period, press the
key. These key functions apply to both T9 Word and Abc
modes. For other symbols, see “Entering Symbols” on page 35.
Using Abc Mode
1.
While composing a text message, press the Left soft key,
then select Abc.
2.
While composing a text message, enter symbols by using
one of following keypads:
• Using the QWERTY keypad:
– Press the Left soft key, then select 123 (not Symbols).
– Press the key(s) labeled with the corresponding symbol(s) that you wish
to insert into your message.
– To return to Abc mode, press the Left soft key, then select Abc.
• Using the phone keypad:
– Press the Left soft key, then select Symbols. The first of three symbol
screens appear in the display.
– Use the Left and Right soft keys to page through the other symbols, if
desired.
– Press the key that corresponds with the symbol that you wish to enter.
For example, press
for an exclamation point (!).
– Repeat these steps to insert additional symbols into your message.
Enter numbers into a text message while in 123 mode.
While composing a text message, press the Left soft key,
then select 123.
Enter numbers while in 123 mode by using one of
following keypads:
35
䊳
following keypads:
Entering Numbers
2.
Enter symbols such as “@” or “%” into a text message.
Enter characters while in Abc mode by using one of
• Using the QWERTY keypad, press the key labeled with the desired
character (such as, press
for “G” and
for “H”).
• Using the phone keypad:
– Press the key repeatedly until the desired character appears in the
display (such as, press
once for “G” and twice for “H”).
– Pause briefly and the displayed character is accepted and inserted into
your message.
– Press
to enter a space and press
to enter a period.
1.
Entering Symbols
Section 6: Understanding Your Contacts
This section details how you can manage your daily contacts by
storing their names and numbers in your Contacts list. You can
have your Contacts entries sorted by name.
Note: Although the procedures in this section are written for the phone
keypad, you can also perform these procedures using the QWERTY
keypad.
The following options appear in the display:
• Find — Find a phone number By Name.
Tip: You can also access the Find option from standby mode, by pressing the
Contacts soft key.
• Add New Contact — Add a number or e-mail address to your
Contacts.
• Speed Dial — Assign a Contacts entry to a Speed Dial number.
(See “Speed Dial” on page 44 for more information.)
• Group — Review, send messages to, add Contacts to, or rename
four out of your five groups. (See “Contacts Groups” on page 45
for more information.)
• Memory Info — Display used and available memory for Contacts
entries.
Contacts
Up to 500 entries can be stored in Contacts. Each entry can have
up to five associated phone numbers and one e-mail address.
Each phone number can be up to 32 digits in length, including 2Sec or Wait pauses (for more information, refer to “Manual
Pause Calling” on page 20), and associated names can be up to
32 characters in length. You can assign the Speed Dial numbers
of your choice for each entry. You can also mark your Contacts
list as Restricted to prevent unauthorized viewing. (For more
information, refer to “Restriction” on page 109.)
Tip: To launch the Contacts menu using a voice command — In standby
mode, press and hold
until the phone prompts, “Say a
command.” Say “Go to Contacts” into the microphone.
2.
Tip: Speed Dial One-Touch Dialing, Two-Touch Dialing, and Three-Touch
Dialing allow you to call numbers stored in Contacts faster.
Select the option of your choice.
Tip: You can also press the keypad number key that corresponds to the
menu option number.
Open Contacts
1.
In standby mode, press Menu ( OK ), then select Contacts.
Understanding Your Contacts
36
Finding a Contacts Entry
4.
Voice Method
Say “Yes” to confirm the name or “No” to hear the next
name, or use the keypad to select the correct name from
Use the VoiceSignal Lookup command to view contact
information for any named contact stored in your Contacts list by
saying the name.
Note: The Lookup command shows the requested contact information in the
display but does not dial any phone numbers for the contact.
the list. (For more information, refer to “Choice Lists” on
page 96.)
• To say the name again, press the Repeat soft key.
• To exit VoiceSignal without dialing, press
.
5. The contact information for the name you selected appears
in the display.
To look up information for a specific contact:
1.
In standby mode, press and hold
•
•
•
•
to launch
VoiceSignal.
“Say a Command” appears in the display and is
pronounced through the speaker.
2.
Say “Lookup”.
VoiceSignal prompts you to “Say the name.”
3.
Speak clearly and say the full name of the person you want
to call, exactly as it is entered in your Contacts list.
• If VoiceSignal recognizes the name you said, the contact
information for that name appears in the display.
• If VoiceSignal does not recognize the name you said, a choice list of
up to three names appears in the display, and VoiceSignal prompts
you with “Did you say?” followed by the first name on the list.
37
Press
to dial the number associated with the name.
Press the Erase soft key to erase this entry from your Contacts list.
Press the EDIT key ( OK ) to add or change information for this entry.
Press the Options soft key and the following options popup in the
display:
– Send Txt Msg
– Send Pic Msg
– Call
– Send Name Card Via Bluetooth
Shortcut Key Method
If you’ve stored a name entry in Contacts, Find allows you to find
it quickly.
1.
In standby mode, press the Contacts soft key.
– Send Pic Msg — Create and send a picture message to the selected
Contact.
– Call — Dial the number associated with the name.
– Send Name Card Via Bluetooth — Send a copy of a Contacts entry
to another Bluetooth device.
The Find screen appears in the display with the Go To field
highlighted, followed by the first few names in your
Contacts list.
Tip: You can also access the Find screen from standby mode by pressing
Menu ( OK ), then selecting Contacts ➔ Find.
2.
Enter a name as entered in Contacts.
Example: If you saved the name as “Amy Smith”, begin the search by
pressing
(for “A”).
As you enter letters, the names of the closest matches
appear in the display.
3.
Select the desired option. The selected option’s sub-menu appears in
the display.
Adding a New Contacts Entry
You can use either of two methods to add an entirely new entry to
Contacts.
Dial Method
1.
your Contacts.
When the desired entry is listed in the display, highlight the
entry, then do one of the following:
•
•
•
•
Press
to dial the number associated with the name.
Press the Edit soft key to add or change information for this entry.
Press the VIEW key ( OK ) to show information about the entry.
Press the Options soft key. The following options appear in the
display:
– New Contact — Add a new entry to Contacts.
– Erase — Erase the name and associated information.
– Send Txt Msg — Create and send a text message to the selected
Contact.
Using the keypad, enter the number you wish to add to
2.
Press the Save soft key. The following options appear in
the display:
• Create New — Lets you create a new Contacts entry.
• Update Existing — Lets you add the number you entered to an
existing Contacts entry.
Understanding Your Contacts
38
3.
Select Create New. The Select Type screen appears in the
display showing the following icons:
Mobile
Home
Work
Pager
Fax
4.
Select the number type that matches your new entry.
5.
Repeat steps 3 and 4 as needed.
5.
Use the keypad to enter a name to associate with the
6.
Press
6.
1.
3.
to save the new entry.
Editing a Contacts Entry
Press
Editing Contacts Name and Numbers
OK
to save the entry.
1.
Find the Contacts entry you wish to change. See “Finding a
Contacts Entry” on page 37 for more information.
In standby mode, press Menu ( OK ), then select Contacts
➔ Add New Contact.
2.
OK
Contacts entry.
Menu Method
39
• Mobile
• Home
• Work
• Pager
• E-Mail
• Group
• Ringtone
• Fax
4. Enter a phone number in the highlighted field.
2.
Select the desired entry. The View Contact screen
The Add New Entry screen appears in the display with the
appears in the display showing the highlighted entry’s
Name field highlighted.
information.
Enter the name of the new entry using the keypad. (For
3.
Use the Up/Down navigation keys to review the information
more information, refer to “Entering Text” on page 33.)
for the entry that you wish to change, then press EDIT
Highlight one of the following fields:
( OK ). The Edit Contact screen appears in the display.
4.
Highlight the particular information you want to add or
change.
• Press to backspace and delete numbers or letters.
• Press and hold to clear all numbers or letters in the highlighted
field.
• Press the Options soft key. The following options popup in the
display:
– Set Speed Dial / Remove speed dial — Assign/remove a speed dial
number (see “Speed Dial” on page 44. for more information).
– Set as default — Set the number the phone will dial when Contacts
dialing, speed dialing, or voice dialing.
– Wait — A hard pause (waits for input from you).
– 2-Sec Pause — A 2-second pause after which dialing resumes (see
“Add Pauses to Contacts Numbers” on page 40. for more
information).
Select the desired option.
5. When you’re finished changing the contents of a field,
press
OK
with the phone number and with special characters called
pauses, up to a maximum of 32 digits.
• Wait — Stops the calling sequence until the phone receives further
input.
• 2-Sec Pause — Stops the calling sequence for two seconds, then
sends the remaining digits.
Note: You can enter multiple Waits to extend the length of a pause. For
example, two consecutive Waits cause a total pause time of four
seconds. Keep in mind that pauses count as digits towards the 32-digit
maximum.
To add pauses to a Contacts entry number, do the following:
1.
want to include one or more pauses. See “Finding a
Contacts Entry” on page 37 for more information.
2.
. Your changes are saved and a confirmation
message appears in the display.
Add Pauses to Contacts Numbers
Calls to automated systems such as banking services often
require a password or account number. Instead of manually
entering these numbers, you can store them in a Contacts entry
Find the Contacts entry associated with the number you
Select and edit the desired number. See “Editing a
Contacts Entry” on page 39 for more information.
3.
Press the Options soft key. The following pause options
appear in the display:
• Wait — A hard pause (waits for input from you).
• 2-Sec Pause — A 2-second pause after which dialing resumes.
4. Select the pause option of your choice to it into the number
sequence.
Understanding Your Contacts
40
5.
When you’re finished entering information, press
OK
to
4.
store the number to Contacts.
information, refer to “Entering Text” on page 33.)
Pause Dial from Contacts
1.
5.
If you stored the number using 2-second pause(s), simply
recall the number from Contacts, and press
to dial
the number.
2.
If you stored the number using Wait(s), recall the number
from Contacts, press
to dial the number, then wait for
Enter a response to the prompt and press
to send the
1.
2.
1.
to save your changes.
Find the Contacts entry you want to edit. See “Finding a
Contacts Entry” on page 37 for more information.
2.
Highlight the desired Contact, then press the Edit soft key.
The Edit Contact screen appears in the display.
3.
Highlight the Picture ID field (at the top of the Edit
Find the Contacts entry you want to edit. See “Finding a
Contact screen), then press the Set soft key.
Contacts Entry” on page 37 for more information.
A photo gallery screen appears in the display, showing a
Highlight the desired Contacts entry, then press the Edit
series of thumbnail photos. (For more information, refer to
“My Images” on page 76.)
soft key.
The Edit Contact screen appears in the display.
3.
OK
When you assign a picture to a Contacts entry, the picture that
you assigned to the entry appears in the display when you
receive a call from that Contact.
digits you entered.
Edit an Existing E-mail Address
Press
Assigning a Picture to a Contacts Entry
the appropriate prompt from the dialed number.
3.
Use the keypad to edit the e-mail address. (For more
Highlight the E-Mail field.
4.
Highlight the picture that you wish to assign to the
Contacts entry.
If there are no pictures, or if you cannot find an appropriate
picture, press the Camera soft key.
41
The camera viewfinder screen appears in the display.
5.
Press TAKE (
OK
3.
The Contact Tone menu showing the following options
). “Picture saved” pops-up in the display
appears in the display:
and you are returned to the Camera viewfinder screen.
6.
Press the My Images soft key. You are returned to the
photo gallery screen.
7.
• My Ringtones
• My Sounds
4. Select the desired option. The My Ringtones or the My
Highlight the picture that you wish to assign to the
Contacts entry, the press
OK
. The Contacts entry screen
Sounds file list appears in the display.
5.
appears in the display with a thumbnail view of the
Press
OK
display with the name of the selected file in the Ringtone
to save the picture assignment to the selected
Contacts entry.
field.
6.
Assigning a Ringtone to a Contacts Entry
When you assign a ringtone to a Contacts entry, the phone plays
the ringtone that you assigned to the entry when you receive a
call from that Contact instead of the ringtone currently assigned
to Voice Calls.
1.
Find the Contacts entry you want to edit. See “Finding a
Contacts Entry” on page 37 for more information.
2.
Highlight the desired Contact, then press the Edit soft key.
The Edit Contact screen appears in the display.
Select the ringtone or sound that you wish to assign to the
Contacts entry. The Contacts entry screen appears in the
selected image in the Picture ID field.
8.
Highlight the Ringtone field, then press the Set soft key.
Press
OK
to save the ringer assignment to the selected
Contacts entry.
Saving a Number After a Call
Once you finish a call, you can store the caller’s number to your
Contacts list.
Note: If the call was incoming and Caller ID information was unavailable,
then the Save option is also unavailable.
1.
Press
to end your call. The call time, length of call,
phone number, and name of the party (if available) appear
Understanding Your Contacts
42
in the display.
2.
4.
Press the Save soft key. The following options appear in
the display:
Select Update Existing. The Update Existing screen
Go To field and the first Contacts entry highlighted.
2.
Find the Contacts entry to which you want to add the new
number. See “Finding a Contacts Entry” on page 37 for
more information.
wish to add it to an existing entry.
1.
. The new entry is saved to your Contacts list.
appears in the display showing your Contacts list with the
depending on whether the number is a new entry or you
Create a New Entry
OK
Add to an Existing Entry
1.
• Create New — Lets you create a new Contacts entry.
• Update Existing — Lets you add the number you entered to an
existing Contacts entry.
3. Follow the instructions in the upcoming sections
Press
3.
Press
OK
. The following number type options appear in the
display:
Select Create New. The Create New screen appears in
the display showing the following number type options:
Mobile
Home
Mobile
Home
Work
Pager
Work
Pager
Fax
Fax
Number types that are already assigned a number show
2.
3.
the number instead of the number type label.
Select the number type that matches your new entry.
Enter a name for the new entry. (For more information,
refer to “Entering Text” on page 33.)
4.
Select the desired unassigned number type. The Contacts
entry information appears in the display with the new
number posted in the appropriate number type field.
43
5.
Press
OK
again to save your changes to the existing entry.
3.
Speed Dial
the display:
A Contacts entry’s Speed Dial number corresponds to the number
keys you press to speed dial one of that entry’s numbers. For
example:
• To speed dial the Contacts entry assigned to Location 5, press and hold
, (1-touch dialing).
• To speed dial the Contacts entry assigned to Location 35, press
then press and hold
, (2-touch dialing).
• To speed dial the Contacts entry assigned to Location 235, press
, press
, then press and hold
(3-touch dialing).
• Set Speed Dial — Assign a speed dial number.
• Set as default — Set the number the phone will dial when
Contacts dialing, speed dialing, or voice dialing.
• Wait — A hard pause (waits for input from you).
• 2-Sec Pause — A 2-second pause after which dialing resumes
(see “Add Pauses to Contacts Numbers” on page 40. for more
information).
Select Set Speed Dial. The Speed Dial screen appears in
the display.
4.
You can assign one or more Speed Dial numbers to a Contacts
entry during new entry creation or by editing an existing entry.
the keypad.
To assign a Speed Call number to a new Contacts entry number,
do the following:
Follow either of the New Contacts entry procedures (see
Important!: Do not enter Speed Call numbers 1 or 911. These numbers are
already assigned to Voicemail (001) and to emergency use (911).
5.
“Adding a New Contacts Entry” on page 38) until you enter
a name for the entry.
2.
After entering the Contacts entry name, do not press
Highlight an Unassigned Speed Dial number or enter an
Unassigned Speed Dial number in the Go To field using
Assignment During Entry Creation
1.
Press the Options soft key. The following options appear in
Dial number assignment.
6.
OK
.
Press SET ( OK ). You are prompted to confirm your Speed
Press the Yes soft key to save your Speed Dial assignment
and return to the Add New Entry screen.
Highlight the number field.
Understanding Your Contacts
44
Note: Press the No soft key to discard the assignment and return to the
Speed Dial screen.
7.
Press
OK
Find the Contacts entry you want to edit. See “Finding a
Contacts Entry” on page 37 for more information.
2.
Highlight the desired entry, then press the Edit soft key.
3.
Highlight the number field marked by the Speed Dial icon
(
), then press the Options soft key. The following
options appear in the display:
• Remove speed dial — Unassign the current speed dial number.
• Set as default — Set the number the phone will dial when
Contacts dialing, speed dialing, or voice dialing.
• Wait — A hard pause (waits for input from you).
• 2-Sec Pause — A 2-second pause after which dialing resumes
(see “Add Pauses to Contacts Numbers” on page 40 for more
information).
Select Remove speed dial. “Remove Speed Dial?” pops
up in the display to confirm your desire to remove the
entry.
Press the Yes soft key to remove the Speed Dial
assignment. “Speed Dial Removed” pops up in the
display, and you are returned to the Edit Contact screen.
to save your changes.
Changing a Speed Dial Location
1.
4.
5.
Do steps 3 through 7 of the “Assignment During Entry
Creation” procedure on page 44.
Contacts Groups
Contact Groups let you easily send messages to multiple,
selected Contacts. You can also use Groups to find Contact
entries and to add/remove Contacts names in a Group or to
create or rename a Group.
Add Contacts Entry to a Group
Using Add New/Edit Contact Option
To add a Contact to a Group using either the Add New Contact
option or the Edit Contact option, do the following:
1.
Create a Contacts entry (see “Adding a New Contacts
Entry” on page 38 for more information) or find a Contacts
entry (see “Finding a Contacts Entry” on page 37 for more
information) that you want to add to a Group.
2.
Highlight the Group field, then press the Set soft key.
The Select Group screen appears in the display showing
Groups similar to the following:
45
• No Group
• Business
• Colleague
• Family
• Friends
3. Select the Group to which you want to assign the new
Contact.
You are returned to the Add New Entry/Edit Contact
screen and the selected Group name populates the Group
2.
following options popup in the display:
• Send Txt Msg
• Send Pic Msg
• Rename
• Erase
• Add
3. Select Add. The Add Contacts screen appears in the
display showing a list of Contacts entries.
field.
4.
Press
OK
to save your changes.
4.
The Add option lets you add one or more existing Contacts to a
Group.
In standby mode, press Menu ( OK ), then select Contacts
➔ Group.
The Group List screen appears in the display showing
Do one of the following:
• Highlight an entry you want to add to the group, then press MARK
( OK ). A check mark appears in the entry’s checkbooks.
Repeat as needed to check all the desired Contacts.
• Press the Mark All soft key.
Using Group Add Option
1.
• Friends
Highlight a Group, then press the Options soft key. The
Note: To unmark a marked Contact, highlight the Contact and press MARK
( OK ) to clear the chicanery.
5.
When you have marked the Contacts you want to add to
Groups similar to the following:
the group, press the Done soft key. “Contact added to
•
•
•
•
group” appears in the display, followed by the selected
No Group
Business
Colleague
Family
Group list including the added Contacts.
Understanding Your Contacts
46
Rename a Group
The Rename option lets you change the name any of the Groups,
except No Group.
1.
The New option lets you add Groups.
1.
In standby mode, press Menu ( OK ), then select Contacts
➔ Group. The Group List screen appears in the display.
2.
Add a New Group
➔ Group. The Group List screen appears in the display.
2.
Highlight the Group name other than No Group that you
wish to change, then press the Options soft key. The
the display.
4.
Enter changes to the group name using the keypad. (For
more information, refer to “Entering Text” on page 33.)
5.
When you have completed your changes to the Group
name, press SAVE ( OK ).
“Group Renamed” appears in the display followed by the
Group List screen showing your renamed Group.
47
Press the New soft key. The New Group screen appears in
the display.
3.
following options popup in the display:
• Send Txt Msg
• Send Pic Msg
• Rename
• Erase
• Add
3. Select Rename. The Rename Group screen appears in
In standby mode, press Menu ( OK ), then select Contacts
Enter a new group name using the keypad. (For more
information, refer to “Entering Text” on page 33.)
4.
When you have completed entering the new Group name,
press SAVE ( OK ). “Group Saved” appears in the display
followed by the Group List screen showing your new
Group.
Erase a Group
The Erase option lets you delete a Group, thus freeing you to
reassign the Contacts formerly in the Group.
1.
In standby mode, press Menu ( OK ), then select Contacts
➔ Group. The Group List screen appears in the display.
2.
Highlight the Group that you wish to delete, then press the
Options soft key. The following options popup in the
display:
• Send Txt Msg
• Send Pic Msg
• Rename
• Erase
• Add
3. Select Erase. You are prompted to confirm the Group
erasure.
4.
To confirm erasure of the highlighted Group, press the Yes
soft key. To retain the Group, press the No soft key.
Deleting a Contacts Entry
1.
Find the Contacts entry you want to delete. (See “Finding a
Contacts Entry” on page 37 for more information.)
2.
Highlight the desired entry, then press the Options soft
key. The following options appear in the display:
• New Contact
• Erase
• Send Txt Msg
• Send Pic Msg
• Call
• Send Name Card Via Bluetooth
3. Select Erase. The phone prompts you to confirm the
erasure.
4.
To confirm erasure of the selected Contact, press the Yes
soft key. To retain the Contact, press the No soft key.
Memory Info
The Memory Info menu option lets you view the amount of
memory you have used to store Contacts entries, as well as the
memory remaining to store more Contacts entries.
䊳
In standby mode, press Menu ( OK ), then select Contacts
➔ Memory Info.
The Memory Info Contacts screen appears in the display
showing the amount of memory Used and remaining (Free)
for Contacts entries.
Understanding Your Contacts
48
Section 7: Messaging
This section explains how to send or receive different types of
messages. This section also describes the features and
functionality associated with messaging.
Note: Although the procedures in this section are written for the phone
keypad, you can also perform these procedures using the QWERTY
keypad.
Types of Messages
Your phone is able to send and receive Text and Picture
messages to compatible phones and devices. Text messages can
be up to 160 characters in length.
Tip: To launch the Create Txt Msg screen using a voice command — In
standby mode, press and hold
until the phone prompts, “Say a
command.” Say “Send Text” into the microphone. You are then
prompted to say a Contact name or a number for the first recipient of the
message.
2.
Enter the phone number or e-mail address of the recipient,
then press
3.
OK
. The Text: appears in the display.
Enter the text content of your message using the keypad.
(For more information, refer to “Entering Text” on
page 33.)
At any point while composing a message:
Note: Available memory is shared between all messages. You can store up to 100
messages. However, the exact number is dependent upon message length.
Create and Send Text Messages
1.
In standby mode, press the Messages shortcut (Up
navigation) key, then select Send Message ➔ Text
Message. The Create Txt Msg screen appears in the
display showing the To: list.
49
• Press the Options soft key to complete the message text and set
message send options. The following options appear in the display:
– Preset Msgs — Insert pre-composed text in your message.
– Save As Draft — Save the message to your Draft folder.
– Save As Preset — Save the text in this message as a new Preset
Msg.
– Add To Contacts — Save the recipient’s number or e-mail address as
a Contacts list entry.
– Delivery — Request a Msg Receipt, set delivery Priority, add your
Callback number (CB#), and/or add Signature text.
– Cancel Msg — Prompts you to save this message as a Draft, then
closes the Create Txt Msg screen.
4.
Once you’re finished entering your message, press
OK
.
Receive Text Messages
When you receive a message in standby mode, the ringer sounds
(unless turned off) and New Message appears in the display
along with the closed envelope icon ( ). The date and time of
the message also appear in the display along with the following
options:
• View Now — Opens the message, where you have the option to
Forward, Reply With Copy, Save Quick Text, Lock, Add To Contacts,
Message Info, or Extract.
• View Later — Saves the message to your inbox, where you can view
it later, then returns your phone to standby mode.
Select your choice.
Receive Messages While in a Call
When you receive a message while in a call, New Message
appears in the display along with the closed envelope icon ( ).
The date and time of the message also appear in the display
along with the following options:
• View Now — Opens the message, where you have the option to
Forward, Reply With Copy, Save Quick Text, Lock, Add To Contacts,
Message Info, or Extract.
• View Later — Saves the message to your inbox, where you can view
it later, and returns your phone to call mode.
Select the desired option.
Send Picture Messages in Camera Mode
Picture messages can be sent to recipients with compatible
phones or devices. You can even accompany a Picture message
with a voice memo or preloaded sound.
Tip: You can send a Picture message to up to ten recipients. Enter each
recipient’s address or phone number in a separate Send to field of the
Picture message composer.
1.
In standby mode, press and hold the Camera-Music Player
key (
). The camera viewfinder screen appears in
the display.
2.
Using the display as a viewfinder, when the image that you
wish to send appears in the display, press TAKE ( OK ) to
take a picture. “Picture saved” pops-up in the display and
you are returned to the Camera viewfinder screen.
Note: For more information about using the camera feature in your phone,
see “Camera” on page 65.
Messaging
50
3.
Press the My Images soft key. A thumbnail view of your
new photo appears in the display with up to three
4.
and do the following; otherwise, proceed to step 10.
Press the Options soft key, then select Send. The Send
• Press the Sounds soft key. The My Sounds screen appears in the
display showing the following options:
– Record New — Record a new memo to insert into the message.
Select Picture Message. The Create Pic Msg screen then
appears in the display with the Send To list highlighted.
6.
Enter the phone number or e-mail address of the recipient
of the Picture message, then press
OK
8.
The Subject: field appears in the display. Enter a subject
Select an option and select the desired sound file to be inserted into
your message.
11. Press the Options soft key to complete the message text
and set message send options. The following options
information, refer to “Entering Text” on page 33.)
appear in the display:
Press the Down navigation key until the Text: field is
•
•
•
•
•
(For more information, refer to “Entering Text” on
page 33.)
51
– Audio files list — Select from the list of previously recorded voice
memos and preloaded audio files on your phone.
for the Picture message using the keypad. (For more
highlighted, then enter the message text using the keypad.
9.
Note: You can record and insert a voice memo of up to 60 seconds in length,
if you record first before attaching a picture. If a picture is attached
before recording, the size of the voice memo is limited to the amount
of remaining memory.
.
Tip: Press the Add soft key to display a pop-up menu containing: Contacts,
Groups, and Recent Calls. These options allow you to find and add
recipients to the Send To list.
7.
use the Down navigation key to highlight the Sound: field
thumbnails of other images.
menu appears in the display.
5.
10. If you wish to insert a sound into your Picture message,
Your new picture appears in the PIC: field.
Preview — View the picture as the recipient will see it.
Add Preset Msg — Add pre-composed text to your message.
Save As Draft — Save the message to your Draft folder.
Priority Level — Choose Urgent or Normal.
Validity Period — Enter the Date when this message will cease to
be valid, then use the Left and Right navigation keys to choose the
Time.
• Delivery Ack — Choose On or Off — Requests confirmation
when your message is received.
• Remove Pic — Remove the picture from your message.
• Remove Sound — Remove the sound file from your message.
• Add To Contacts — Save the recipient’s number or e-mail
address as a Contacts list entry.
Select an option.
12. Press
OK
Tip: To launch the Create Pic Msg screen using a voice command — In
standby mode, press and hold
until the phone prompts, “Say a
command.” Say “Send Picture” into the microphone. You are then
prompted to say a Contact name or a number for the first recipient of the
message.
2.
using the keypad, then press
OK
.
to send the message. “Pic Msg Sending”
appears in the display and a progress bar indicates the
send status.
Send Picture Messages in Standby Mode
Send Picture messages to recipients with a compatible phone or
other device, and accompany the Picture message with a voice
memo, ring tone, or downloaded melody.
Tip: Press the Add soft key to display a pop-up menu containing: Contacts,
Groups, and Recent Calls. These options allow you to find and add
recipients to the Send To: list.
3.
information, refer to “Entering Text” on page 33.)
Tip: You can send a Picture message to up to ten recipients. Enter each
recipient’s address or phone number in a separate Send To field of the
Picture message composer.
Press the Down navigation key until the Text: field is
highlighted, then enter the message text using the keypad.
(For more information, refer to “Entering Text” on
page 33.)
In standby mode, press the Messages shortcut (Up
navigation) key, then select Send Message ➔ Picture
The Subject: field appears in the display. Enter a subject
for the Picture message using the keypad. (For more
4.
1.
Enter the phone number or e-mail address of the recipient
5.
Press the Down navigation key until the Pic: field is
Message. The Create Pic Msg screen then appears in the
highlighted, then press the My PIC soft key. A photo
display with the Send To tab highlighted and showing the
gallery of thumbnail images appears in the display.
To: list.
Messaging
52
6.
Use the navigation keys to highlight a picture to be added
to your message, then do the following:
• If you want, press the View soft key to expand the highlighted
picture to full-screen size.
• If you want to include a new picture, press the Camera soft key.
Note: For more information about using the camera feature in your phone,
see “Camera” on page 65.
• Press OK to add the highlighted picture to your message.
You are returned to the Create Pic Msg screen with the
selected picture in the Pic: field.
7.
If you wish to insert a sound into your Picture message,
use the Down navigation key to highlight the Sound: field
and do the following; otherwise, proceed to step 8.
• Press the Sounds soft key. The My Sounds screen appears in the
display showing the following options:
– Record New — Record a new memo to insert into the message.
Note: You can record and insert a voice memo of up to 60 seconds in length,
if you record first before attaching a picture. If a picture is attached
before recording, the size of the voice memo is limited to the amount
of remaining memory.
– Audio files list — Select from the list of previously recorded voice
memos and preloaded audio files on your phone.
53
• Select and insert a sound into your message.
• Press to exit the pop-up menu without inserting a sound.
8. Press the Options soft key to complete the message text
and set message send options. The following options
appear in the display:
•
•
•
•
•
Preview — View the picture as the recipient will see it.
Add Preset Msg — Add pre-composed text to your message.
Save As Draft — Save the message to your Draft folder.
Priority Level — Choose Urgent or Normal.
Validity Period — Enter the Date when this message will cease
to be valid, then use the Left and Right navigation keys to choose
the Time.
• Delivery Ack — Choose On or Off — Requests confirmation
when your message is received.
• Remove Pic — Remove the picture from your message.
• Remove Sound — Remove the sound file from your message.
• Add To Contacts — Save the recipient’s number or e-mail
address as a Contacts list entry.
9. Select an option to perform its function.
10. Press SEND ( OK ) to send the message. “Pic Msg
Sending” appears in the display and a progress bar
indicates the send status.
Receive Picture Messages
When you receive a Picture Message in standby mode, the ringer
sounds (unless turned off) and New Message appears in the
display along with the closed envelope icon ( ). The date and
time of the message also appear in the display along with the
following options:
• View Now — Retrieves and opens the message, where you have the
option to Reply, Forward, Delete, Save Text, Save Pic, or Save Msg.
• View Later — Saves the message to your inbox, where you can view
it later, then returns your phone to standby mode.
Select the desired option.
View a Picture Message Now
1.
After you select the View Now option, “Connecting”
appears in the display followed by “Retrieving” and a
• Play Again — Play the sound file included in the picture message
again.
• Forward — Send a copy of this message to another recipient.
• Erase — Discard (delete) this message.
• Save Pic — Save the picture included in this message to the My
Images folder.
• Save Sound — Save the sound file included in this message to
the My Sounds folder.
• Save Quick Text — Save the text in this message as a new Quick
Text.
• Lock / Unlock — Block/permit erasure of the highlighted
message.
• Add To Contacts — Save the sender’s number to your Contacts.
• Message Info — Shows message delivery status, addressee,
size, and so on.
• Extract — Calls the sender of the received message.
4. Select an option to perform its function.
progress bar indicating that the message is downloading
to your phone.
2.
After the Picture message has downloaded, an alert
sounds, and the new Picture message appears in the
display. If the message includes a sound file, the phone
begins playing it.
3.
While viewing your message press the Options soft key.
Note: For more information on received picture message options, see
“Inbox” on page 55.
View a Picture Message Later
1.
In standby mode, press the Messages shortcut (Up
navigation) key, then select Inbox. The Inbox appears in
the display.
The following options appear in the display:
Messaging
54
2.
If the new picture message is not highlighted, use the Up
and Down navigation keys to highlight the new message.
3.
Press View ( OK ). “Connecting” appears in the display
Tip: While in a call, press the Options soft key, then select Messages ➔
Inbox.
2.
Select the message that you wish to view.
3.
While viewing your message, press the Options soft key.
followed by “Retrieving” and a progress bar indicating
that the message is downloading to your phone.
4.
Once a Picture message has been downloaded to your
phone, the new Picture message appears in the display. If
the message includes a sound file, the phone begins
playing it.
Note: For more information on viewing and managing received picture
messages, see “Inbox” on page 55.
Message Boxes
Your phone stores messages in any one of five message boxes.
The subsections that follow describe each message box in detail.
Inbox
Received messages of all types (except Voicemail) are stored in
the Inbox.
1.
In standby mode, press the Messages shortcut (Up
navigation) key, then select Inbox. The Inbox appears in
the display.
55
The following options appear in the display:
• Play Again — Picture Messages Only — Play the sound file
included in the picture message again.
• Forward — Send a copy of this message to another recipient.
• Reply With Copy — Compose and send a reply message to
the originator of the received message and include a copy of the
original message.
• Erase — Delete this message from the Inbox.
• Save Pic — Picture Messages Only — Save the picture included
in this message to the My Images folder.
• Save Sound — Picture Messages Only — Save the sound file
included in this message to the My Sounds folder.
• Save Quick Text — Save the text in this message as a new Quick
Text.
• Lock / Unlock — Block/permit erasure of the highlighted
message.
• Add To Contacts — Save the sender’s number to your Contacts.
• Message Info — Shows message delivery status, sender, size,
and so on.
• Extract — Calls the sender of the received message.
4. Select an option to perform the function for that option.
Managing Inbox Messages
1.
In standby mode, press the Messages shortcut (Up
navigation) key, then select Inbox. The Inbox appears in
the display.
2.
Highlight a message in the list.
3.
Press the Erase soft key to remove the highlighted
Outbox
Your phone stores messages in the Outbox, regardless of
whether the message was successfully transmitted. Verify if and
when a message or e-mail was successfully received by
enabling the Enh. Delivery Ack/Delivery Ack feature.
Review Messages in the Outbox
1.
In standby mode, press the Messages shortcut (Up
message from the Inbox.
navigation) key, then select Outbox. Your list of sent
– or –
messages appear in the display.
Press the Options soft key. The following options appear in
the display:
• Reply — Compose and send a reply message to the originator of
the received message.
• Reply With Copy — Text Message Only — Compose and send a
reply message to the originator of the received message along with
a copy of the original received message.
• Forward — Send a copy of this message to another recipient.
• Lock / Unlock — Block/permit erasure of the highlighted
message.
• Add To Contacts — Save the sender’s number to your Contacts.
• Erase Inbox — Delete all unlocked messages from the Inbox.
• Message Info — Shows message delivery status, addressee,
size, and so on.
Select an option to perform the function for that option.
Tip: While in a call, press the Options soft key, then select Messages ➔
Outbox.
2.
Select the message that you wish to view.
3.
While viewing your message press the Options soft key.
The following options appear in the display:
• Play Again — Picture Messages Only — Play the sound file
included in the picture message again.
• Erase — Delete this message from the Outbox.
• Forward — Send the highlighted message to another recipient.
• Lock / Unlock — Block/permit erasure of the highlighted
message.
• Save Quick Text — Save the message text as Quick Text for
insertion into other messages.
Messaging
56
• Add To Contacts — Save the recipient’s number to your
Contacts.
• Message Info — Shows message delivery status, addressee,
size, and so on.
• Extract — Call the recipient of this message.
4. Select an option to perform the function for that option.
• Resend — Re-send the highlighted message to the original
recipient.
• Lock / Unlock — Block/permit erasure of the highlighted
message.
• Add To Contacts — Save the recipient’s number to your
Contacts.
• Erase Outbox — Delete all unlocked messages from the Outbox.
• Message Info — Shows message delivery status, addressee,
size, and so on.
Select an option to perform the function for that option.
Messages and Lock Mode
Your phone can still receive messages while in Lock Mode. The
time and date of the message appear in the display, but you
cannot access the message until you enter the lock code.
Managing Outbox Messages
1.
In standby mode, press the Messages shortcut (Up
navigation) key, then select Outbox. Your list of sent
messages appear in the display.
Messages in the Draft Box are those that have been composed
but never sent. You can return to the Draft Box at any time to
view, edit, or send a draft message.
Create a Draft Message
1.
In standby mode, press the Messages shortcut (Up
2.
Highlight a message.
3.
Press the Erase soft key to remove the highlighted
navigation) key, then select Send Message and one of the
message from the Inbox.
following Send Message options:
– or –
Press the Options soft key. The following options appear in
• Text Message
• Picture Message
The Create Txt Msg screen or Create Pic Msg screen
the display:
appears in the display showing the To: list.
• Forward — Send the highlighted message to another recipient.
57
Draft Box
2.
Enter the phone Number or E-Mail address of a recipient,
then press
3.
OK
.
Compose your message using the keypad, then press the
Options soft key.
4.
Select Save As Draft. A confirmation message appears in
the display and your message is saved to the Drafts box.
View and Edit Draft Text Messages
1.
In standby mode, press the Messages shortcut (Up
• Save As Draft — Save the message to your Drafts box.
• Save As Preset — Save text of this message as Preset Msg.
• Add To Contacts — Save the recipient’s number or e-mail
address to your Contacts.
• Delivery — Request a Msg Receipt, set delivery Priority, add your
Callback number (CB#), and/or add Signature text.
• Cancel Msg — Prompts you to save this message as a Draft, then
closes the Create Txt Msg screen.
5. Select an option to perform the function for that option.
6.
messages that you’ve saved appears in the display.
2.
Highlight a text message that you wish to view or edit, then
1.
Highlight the picture message that you wish to view, then
press EDIT ( OK ). The message edit screen appears in the
display.
information, refer to “Entering Text” on page 33.)
Press the Options soft key to complete the message text
In standby mode, press the Messages shortcut (Up
messages that you’ve saved appears in the display.
2.
address and the message text using the keypad. (For more
4.
to send it.
navigation) key, then select Drafts. A list of any draft
the display.
Enter or change the recipient’s number and/or e-mail
OK
View and Edit Draft Pic. Messages
press EDIT ( OK ). The message text edit screen appears in
3.
When you have completed composing your message,
press
navigation) key, then select Drafts. A list of any draft
3.
Make any needed changes and press the Options soft key.
and set message send options. The following options
The following options appear in the display:
appear in the display:
• Preview — Shows the message contents.
• Preset Msgs — Insert pre-composed text into your message text.
Messaging
58
• Add Preset Msg — Insert pre-composed text into your message
text.
• Save As Draft — Saves the changed message to the Draft Box.
• Priority Level — Choose Urgent or Normal.
• Validity Period — Enter the Date when this message will cease
to be valid, then use the Left and Right navigation keys to choose
the Time.
• Delivery Ack — Choose On or Off — Requests confirmation
when your message is received.
• Remove Pic — Remove image included in draft message.
• Remove Sound — Remove sound file included in draft message.
• Add To Contacts — Save the recipient’s number or e-mail
address to your Contacts.
4. Select an option to perform the function for that option.
5.
When you have completed composing your message,
press
OK
to send it.
Managing Draft Messages
1.
In standby mode, press the Messages shortcut (Up
navigation) key, then select Drafts. A list of any draft
messages that you’ve saved appears in the display.
2.
Highlight a message, then press the Erase soft key to
remove the highlighted message from the Drafts box.
– or –
59
Press the Options soft key. The following options appear in
the display:
• Send — Send the highlighted message to the original recipient, if
the recipient’s number and/or e-mail address is included with the
draft message.
• Lock / Unlock — Block/permit erasure of the highlighted
message.
• Add To Contacts — Save the recipient’s number and/or e-mail
address to your Contacts.
• Save Quick Text — Save the message text as Quick Text for
insertion into other messages.
• Erase Drafts — Delete all unlocked draft messages.
3. Select an option to perform the function for that option.
Voicemail
Messages in your voice mailbox are logged in the Voicemail box
of the Messages menu. Open the Voicemail box to view the
Callback # (if available), Urgency, and other details of the
Voicemail message.
Listen to Voicemail Now
Once you’ve received a new voicemail message, you have the
option to either:
• Listen Now — Calls your voice mailbox and allows you to listen to
your messages.
• Listen Later — Returns you to standby mode where you can later
choose to call your mailbox and review your messages.
䊳
Select the desired option.
Listen to Voicemail Now
When you choose to review your new voicemail message(s) right
away, your phone calls your voice mailbox so that you can listen
to the message(s). (For more information, refer to “Listen to
Voicemail” on page 7.)
Erase Messages
You can erase all of the messages in each your boxes from one
convenient location.
Note: This function erases all messages in the selected box. To delete a
single message, open the box from the Messages menu, then delete
the message from the Options menu while viewing the message
content.
1.
Listen to Voicemail Later
navigation) key, then select Erase Messages. The
If you have chosen to review your voicemail messages at a later
time:
1.
In standby mode, press the Messages shortcut (Up
navigation) key, then select Voicemail. The Voicemail
screen appears in the display, showing the number of new
voicemail messages received and the date and time the
following options appear in the display:
•
•
•
•
Inbox — Deletes all unlocked messages stored in the Inbox.
Outbox — Deletes all unlocked messages stored in the Outbox.
Drafts — Deletes all unlocked messages stored in the Drafts box.
All Messages — Deletes all unlocked messages stored in all of
the message boxes, except Voicemail.
2. Select the box containing the messages that you wish to
latest message was received.
2.
Press
or
OK
delete. You’re prompted to confirm the erasure of all
to call your voice mailbox and listen to
the message.
Note: From standby mode, you can press and hold
mailbox.
In standby mode, press the Messages shortcut (Up
messages in the selected box or in all boxes.
3.
to dial your voice
To delete the messages, press the Yes soft key. To cancel
deleting the messages, press the No soft key.
Messaging
60
Message Settings
Use the Msg Settings sub-menu to define settings for your text
and picture messages.
1.
In standby mode, press the Messages shortcut (Up
navigation) key, then select Msg Settings.
The following options appear in the display:
• Notification — Choose to be advised of newly received messages
by an on-screen message and icon or by an icon only.
• Auto Save — Choose whether your messages are saved
automatically when you exit them (Auto Save, Do not save,
Prompt).
• Auto Erase — Choose to receive (On) or not receive (Off) a
warning message when you delete a message.
• Auto View — On/Off — With Auto View On, the full content of a
text message appears in the display as the messages is received.
• Entry Mode — Choose the default method for entering text into
messages (T9 Word, Abc, ABC, 123).
• CB# — Choose whether to include a callback phone number with
your outgoing messages, and enter the number to be included.
• VM# — Edit or view your Voicemail number.
• Signature — Choose whether to include a text signature in
outgoing message text, and enter the text to be included.
• Preset Msgs — Erase, EDIT, or add New Preset Msgs.
61
• Auto Scroll — On/Off — With Auto Scroll On, the full content of a
text message automatically rolls upward on the display, one screenfull at a time.
• Messaging Font Size — Set the messaging font size to Large or
Normal.
2. Select an option to perform the function for that option.
Section 8: Browser
This section outlines how to launch Browser, how to navigate to
other pages on the web, and how the keys on the keypad are
used with the web application. Additionally, links to other sites
are briefly discussed.
2.
Browser:
• Press the Left navigation key.
• Press Menu, then select Browser ➔ Go to Web.
Browser
With Browser, you can conveniently surf the web and download
ringtones and wallpapers using your phone. Each time you
launch Browser, your phone connects to the Internet and the
service indicator icon (
) appears in the display.
Note: The first time you launch Browser, the warning message “Browse &
Download use airtime.” pops up in your display. To have this
message repeat the next time you launch Browser, press Continue
(
). To stop this message repeating, press Remove (
).
A list of categories (each representing one or more web
Stored Web Content
Browser ends an Internet connection after a certain period of
inactivity, however some information from your session remains
stored in the phone (if you leave your phone turned on). You can
access this information without reconnecting to the Internet.
However, if you are viewing stored information, and you select a
link to a site that was not accessed in your last session, you
automatically re-connect to the Internet.
Launching Browser
1.
Open the QWERTY keypad.
Note: The Browser is only accessible using the QWERTY keypad.
In standby mode, do one of the following to launch
sites) appears in the display.
3.
Use the navigation keys to browse the categories.
4.
Once the desired category is highlighted, press
(
)
to enter the category list.
Exit Browser
䊳
Press
to exit Browser.
Using Browser
When you use Browser, some of the keys operate differently than
during a normal phone call.
Browser
62
Browser presents on-screen items in any of the following ways:
• Text or numeric input.
• Links (embedded in content).
• Numbered options (some may not be numbered).
• Simple text.
You can act upon options or links by using the soft keys.
Browser soft keys
The bottom of the Browser display is a bar that contains browser
commands. The Left and Right (
) soft keys on the
QWERTY keypad are used to execute the command that appears
above them in the display. These are called “soft keys” because
their function changes depending on the application.
Using Links
Links have several purposes, such as jumping to a different
page, to a different site, or even initiating a phone call. Links are
shown inside of brackets ([ ]). You can normally use the Left soft
key ( ) to select a link when it is highlighted.
How Browser Keys Work
The following table lists Browser keys and their functions.
OK
63
Navigation keys — Use to browse lists and options.
BACK Key — A browse, back-up key. Press once to
back up one page. Press and hold to go back to home
page. Press to clear the last number, letter, or symbol
entered. Press and hold to completely clear the display.
Shift Key — Press before entering text to enable
uppercase characters.
Last Key — Press to enter a zero (0), or to move to the
last item in a menu.
Pound/Space Key — Press to insert a space when
entering text.
Number 1 through 9 — Use the number keys to select
items in a menu if they are numbered.
End Key — Press to exit the Browser and return the
phone to standby mode.
Left Soft Key — Press to activate the command that
appears above it in the display.
Right Soft Key — Press to activate the command that
appears above it in the display.
Section 9: Games & Apps
This section explains the Games & Apps features where users
can download multimedia, applications, games, and check news
and sports.
Finding Applications
With Games & Apps, you can download full featured applications
over the air including games, personalized ring tones, pictures,
and more.
1.
Open the QWERTY keypad.
The Games & Apps screen appears in the display with the
Games & Apps icon (
) highlighted. You have the
following options:
• Press
. The Games & Apps menu appears in the display.
You can use the items in this menu to browse or search for,
purchase, and download applications.
• Use the navigation keys to select an application on your phone that
you wish to launch.
Note: Games & Apps is only accessible using the QWERTY keypad.
2.
In standby mode, do one of the following to launch Games
& Apps:
• Press the Right navigation key.
• Press Menu, then select Games & Apps ➔ Games & Apps.
Note: The first time you launch Games & Apps, the warning message
“Browse & Download use airtime.” pops up in your display. To have
this message repeat the next time you launch Games & Apps, press
Continue (
). To stop this message repeating, press Remove
(
).
Games & Apps
64
Section 10: Camera
Use your The r450 phone to take full color digital pictures,
display them on your phone’s vivid color display, and instantly
share them with family and friends. It’s fun, and as easy to use as
a traditional point-and-click camera. This section explains how
you can do the following:
• Take pictures with your phone’s built-in digital camera.
• Send and receive pictures taken with your phone’s camera.
• Set the several options associated with the camera that help you take
crisp, clear pictures.
Activating Your Camera
1.
In standby mode, press and hold the Camera-Music Player
key (
) on the right side of the phone.
Note: You can also activate the camera by pressing Menu, then selecting
Multimedia ➔ Camera.
Taking pictures with the built-in camera is as simple as choosing
a subject, pointing the lens (located on the rear of your phone, at
the top), and pressing a button.
Taking Snap Shots (Single Pictures)
To take a single picture using the current camera settings, do the
following:
1.
In camera mode, point the camera lens at your subject.
2.
When the image that you wish to capture appears in the
display, press TAKE ( OK ) or
. The soft keys change
giving you the following options:
finder screen. (For more information,
• Save your new photo by pressing the Save soft key.
• Save your new photo and include it as part of a Picture message by
pressing SEND ( OK ).
• Discard your new photo by press the Erase soft key.
Press the desired key, and you are returned to the Camera
refer to “Camera Screen Layout” on
viewfinder screen.
The message “Loading” appears in
the display followed by a camera view
page 67.)
65
Your phone is now in camera mode.
Taking Pictures
3.
To view the new picture, press the My Images soft key. A
1.
soft key. The options menu bar
along with any other thumbnail images, if available.
appears in the display with the Self
Timer icon (
To enlarge the picture, highlight it and press VIEW ( OK ).
4.
In camera mode, press the Options
thumbnail image of your new photo appears in the display
To erase the new picture, highlight it and do the following:
• Press the Options soft key, then select Erase. You are prompted to
confirm that you want this photo erased.
• To erase this photo, press the Yes soft key. To retain this photo,
press the No soft key.
• To return to the camera viewfinder screen, press the Camera soft
key.
Taking Multi Shot Pictures
When taking pictures of moving subjects or subjects you cannot
pose, such as children and pets, the camera’s Multi Shot mode
simplifies the process of taking multiple pictures in quick
succession. After taking Multi Shot pictures, the camera
automatically displays thumbnail views of the pictures you have
just taken so you can select the best picture(s) and discard the
rest.
2.
) highlighted.
Use the Left/Right navigation keys to
highlight the Multi Shot icon (
).
The following Multi Shot options appear in the display:
• Off — Lets you take one photo each time you press TAKE ( OK ).
• On — Lets you take a series of three photos each time you press
TAKE ( OK ).
3. When you select On, the Series Shot progress bar
(
) appears in the display.
Tip: You can change a number of the camera’s settings to suit particular
uses for your pictures. (For more information, refer to “Camera Options”
on page 69.)
4.
Using the display as a viewfinder, point the camera lens in
the back of your phone at your subject.
5.
When the image that you wish to capture appears in the
display, press TAKE ( OK ). The camera takes three pictures
in quick succession, then displays the pictures for your
approval, each with a check mark in it’s check box.
Camera
66
The soft keys change giving you the following options:
• To save all of the photos, press the Done soft key.
• To save some of the photos and discard the rest, use the Navigation
key to highlight each photo you want to discard and press OK to
unmark it, then press the Done soft key to save the marked
photo(s).
• To discard all of the photos, press .
You are returned to the Camera viewfinder screen.
6.
To view the new pictures, press the My Images soft key.
Thumbnail images of your new photos appear in the
display along with another thumbnail image, if available.
To enlarge a picture, highlight it and press VIEW ( OK ).
7.
To erase the new pictures, highlight each new photo in
turn and do the following:
• Press the Options soft key, then select Erase. You are prompted to
confirm that you want this photo erased.
• To erase this photo, press the Yes soft key. To retain this photo,
press the No soft key.
• To return to the camera viewfinder screen, press the Camera soft
key.
Camera Screen Layout
When you activate your phone’s camera,
the second line of the display is reserved
for the current camera resolution setting
and the picture counter. The center of the
display shows a viewfinder image of the
subject at which the camera is pointed. The
soft key labels on the bottom line of the
display change to the following:
• My Images — Pressing the My Images soft key opens the My
Images multimedia folder so you can view or manage your stored
pictures. (For more information, refer to “The Photo Gallery” on
page 73.)
• TAKE — Pressing TAKE ( OK ) takes a picture of the image currently
appearing on the display.
• Options — Pressing the Options soft key opens a menu bar of camera
options and settings.
Camera Screen Icons
Your camera displays status icons as shown.
Camera — Indicates the camera is active.
Night Shot — Indicates the camera is set to take
pictures in low light.
67
Quality — Indicates camera’s picture quality setting. (You
can change the picture quality setting. For more
information, refer to “Quality” on page 70.)
Camera Resolution — Indicates camera’s current
resolution setting. (You can change the camera
resolution setting. For more information, refer to
“Camera Options” on page 69.)
Brightness — Brightens or darkens the image from
-4 to +4.
Zoom — Enlarges the image from X0 to X9 before
you take a picture. (Depending on the camera
resolution setting.)
Photo Limit — Indicates the available number of photos
you can take. (Depending on the camera resolution
setting.)
White Balance — Indicates camera’s white balance
setting. (You can change the camera white balance
setting. For more information, refer to “White Balance”
on page 70.)
Self Timer in use — Delays the camera shutter from 2
to 10 seconds after you press OK .
Memory — Indicates where new photos will be stored:
in the phone (as shown) or on an optional Memory Card
(
). (For more information, refer to “Memory Card
(Optional)” on page 7.)
Multi Shot in use — Takes three
pictures when you press TAKE ( OK ).
Saving Pictures
After you’ve taken a picture, it is automatically saved in the My
Images folder, which is a part of your phones memory (and that of
an optional Memory Card, if installed) that is devoted to storing,
browsing, and viewing saved pictures.
You can do the following with your saved pictures:
• Enlarge a picture for better viewing by pressing VIEW ( OK ). (To
return to the thumbnail image, press VIEW ( OK ) again.)
• Send a picture to someone else by pressing the Options soft key,
then selecting Send.
(For a detailed procedure, refer to “Send Picture Messages in
Camera Mode” on page 50.)
• Discard a picture by pressing the Options soft key, then selecting
Erase. (You are prompted to confirm your erasure of the picture.)
Camera
68
Camera Options
The Camera Options let you adjust the default camera settings to
suite available lighting, the subject of the photo, or the purpose of
the photo. To access Camera Options, do the following:
1.
In camera mode, press the Options soft key. The following
sub-menus appear in the display:
•
•
•
•
•
•
•
Self Timer
Multi Shot
Quality
Resolution
White Balance
Color Effects
Settings
– Memory
– Shutter Sounds
– Reset Settings
– Night Shot
– Auto Save
2. Highlight the desired option and/or setting value, then
press
OK
to save the selected value.
Self Timer
Self Timer lets you delay taking a picture long enough to let you
join others in a picture.
69
1.
In camera mode, press the Options soft key and select
Self Timer. Highlight one of the following Self Timer
options:
• Off
• 2 Seconds
• 5 Seconds
• 10 Seconds
2. Press OK . If you select 2 Seconds, 5 Seconds, or 10
Seconds, the Self Timer icon appears in the camera screen
in the display.
The next time you press
OK
, the countdown timer
indicates the time remaining before the camera takes the
picture. The phone reads the countdown timer value
beginning with two or three and continuing to zero, when
the picture is taken.
Tip: To stop the countdown timer without resetting it, press the
key.
Multi Shot
Multi Shot lets you take three pictures in succession at the touch
of a key.
1.
In camera mode, press the Options soft key, then select
Multi Shot and one of the following Multi Shot options:
• Off
• On
2. Select the desired option setting.
Note: When a Multi Shot option is set to On, the Series Shot progress bar
(
) appears in the viewfinder screen.
The next time you press TAKE ( OK ), the camera takes
3.
You can affect how much your photo is compressed, thereby
reducing it’s overall size (not to be confused with resolution).
1.
In camera mode, press the Options soft key, then select
Quality.
2.
The following options appear in the display: Fine, Normal,
or Economy.
OK
.
You’re returned to the camera viewfinder screen.
Resolution
Change the size (in bytes) of your pictures using the Resolution
setting.
1.
In camera mode, press the Options soft key, then select
Resolution options:
• 960x1280 (pixels)
• 480x640 (pixels)
• 240x320 (pixels)
• 120x160 (pixels)
2. Highlight the desired resolution setting, then press
several pictures in rapid succession.
Quality
Highlight the desired Quality setting, then press
OK
.
You’re returned to the camera viewfinder screen.
Note: The Resolution setting affects zoom capabilities. When Resolution is
set to 1280 X 960, zoom is not available. When Resolution is set to any
value lower than 1280 X 960, zoom settings 1 – 8 are available.
White Balance
White Balance allows you to adjust picture quality according to
available light.
1.
In camera mode, press the Options soft key, then select
White Balance.
Camera
70
2.
Select one of the following White Balance values:
• Auto — The camera automatically adjusts picture quality to
available light.
• Sunny — Use this setting when taking pictures in full sun.
• Cloudy — Use this setting when taking pictures in cloudy
conditions.
• Tungsten — Use this setting when taking pictures under
incandescent lights.
• Fluorescent — Use this setting when taking pictures under
fluorescent lights.
Each option, as you highlight it, shows the effects it has on
a picture.
3.
1.
Color Effects.
2.
Press
OK
. The following options appear in the display:
Note: Choose Normal to disable Color Effect.
• Normal — Subjects and pictures appear with normal hues.
• Black&White — Subjects and pictures appear in black and white.
• Sepia — Subjects and pictures appear in a brownish-gray hue.
• Negative — Subjects and pictures appear in inverted colors.
• Green — Subjects and pictures appear in a greenish hue.
3. Highlight the color effect of your choice, then press OK .
When you decide on the White Balance you wish to use,
You’re returned to the camera viewfinder screen.
press
When you take your next picture, the phone’s display
OK
. The camera viewfinder screen appears in the
display with your selected White Balance applied.
The next time you press TAKE ( OK ), the camera applies
your selected White Balance to your picture.
Color Effects
Change the look of your pictures with Color Effects. Choose from
six available settings such as Sepia, Negative, and Aqua. The
selected Color Effect previews in the display before you take the
picture.
71
In camera mode, press the Options soft key, then select
shows your subject image with the selected Color Effect.
Settings
Most camera options apply only during the current camera
session. Camera settings, however, apply to all camera sessions
until you change or reset their values.
Memory
1.
In camera mode, press the Options soft key. The options
menu bar appears in the display.
2.
Use the Left and Right navigation keys to highlight
Settings.
3.
1.
In camera mode, press the Options soft key, then select
Select Memory. The following Memory options appear in
Settings ➔ Reset Settings. You are prompted to confirm
the display:
reset of all camera settings.
• Phone — Stores pictures in phone memory.
• Card — Stores pictures on an optional microSDTM Memory Card.
4. Select the memory location of your choice. You’re returned
to the camera viewfinder screen.
Shutter Sounds
• To reset the camera settings to default values, select the On option.
• To keep the current camera settings, select the Off option.
Night Shot
Night Shot lets you take pictures in low light conditions.
1.
Choose from four different sounds whenever you take a picture.
Aside from being a cool sound effect, Shutter Sounds acts as an
audible reminder that your camera has taken a picture.
1.
Reset Settings
In camera mode, press the Options soft key, then select
Settings ➔ Shutter Sounds. The following shutter sounds
the display:
• Off
• On
2. Select the Night Shot setting of your choice. You’re
returned to the camera viewfinder screen.
appear in the display:
• Off
• Shutter
• OK
• Ding Dong
2. Highlight the shutter sound setting of your choice, then
press
OK
. You’re returned to the camera viewfinder
In camera mode, press the Options soft key, then select
Settings ➔ Night Shot. The following options appear in
Auto Save
Auto Save lets you choose whether the camera automatically
saves new photos as they are taken.
1.
In camera mode, press the Options soft key, then select
Settings ➔ Auto Save.
screen.
Camera
72
The following options appear in the display:
• Off — Default Value — You are prompted to save a new photo.
• On — New photos are saved automatically.
2. Select the Auto Save setting of your choice. You’re
returned to the camera viewfinder screen.
Zoom
Zoom lets you temporarily enlarge the pictures you take.
Increasing the Zoom (1 – 8) enlarges your pictures or videos (0 is
normal).
䊳
The next time you TAKE ( OK ), the camera takes a lighter or
darker picture according to your selected Brightness
setting.
The Photo Gallery
Saved pictures are stored in the My Images folder. You can
browse the pictures one at a time (expanded mode), or view
several pictures at once in thumbnail format.
1.
In camera mode, press the My Images soft key.
Thumbnail images of the first 4 of any pictures that you’ve
In camera viewfinder screen, use the Left and Right
saved appear in the display.
navigation keys to adjust the Zoom (the screen image
enlarges to show the affects of your changes).
The next time you press TAKE ( OK ), the camera takes an
enlarged picture according to your selected Zoom setting.
Brightness
Brightness lets you temporarily lighten the pictures you take.
Increasing the Brightness (-4 – +4) lightens your pictures (0 is
normal).
䊳
- Pressing the Down navigation key and selecting My Images.
- Pressing Menu, then select Multimedia ➔ My Images.
2.
Use the Navigation key to browse pictures in the gallery.
3.
Press VIEW ( OK ) to expand a selected photo to fill the
screen or to reduce the selected photo to a thumbnail
image.
In camera viewfinder screen, use the Up and Down
navigation keys to adjust the Brightness (the screen image
lightens or darkens to show the affects of your changes).
73
Tip: You can also access My Images in standby mode by:
4.
Press the Options soft key while viewing photos in the My
Images folder. The following options appear in the display:
• Send — Send the currently displayed or highlighted photo as a
Picture Message or Via Bluetooth to another device. (For more
information, refer to “Bluetooth” on page 84.)
• Set As — Assign the currently displayed or highlighted photo to be
standby screen Wallpaper or as a Picture ID for someone in your
Contacts list.
• Rename — Rename the currently displayed or highlighted picture.
• Copy — Copy the highlighted image to Phone memory or Card
Memory.
• Move — Move the highlighted image to Phone memory or Card
Memory.
• Lock / Unlock — Lock the currently displayed or highlighted
image so that it cannot be deleted, or unlock the photo so that it
can be deleted.
• Erase — Mark and erase selected unlocked photos.
• Erase All — Erase all unlocked photos.
• Photo Info — View the Title, time and date created, size, and
resolution of the currently highlighted or displayed photo.
5. Select the desired option to perform the function for the
option or enter its sub-menu.
Point, Click, and Send Pictures
Take a picture and send it to anyone with a compatible device in
a few easy steps.
1.
key (
2.
Highlight a picture that you wish to view full size, press
VIEW ( OK ).
2.
Press VIEW ( OK ) again to return to the thumbnail view of
) to activate the camera.
Using the display as a viewfinder, when the image that you
wish to send appears in the display, press TAKE ( OK ) to
take a picture. “Picture saved” pops-up in the display and
you are returned to the Camera viewfinder screen.
3.
Press the My Images soft key. A thumbnail view of your
new photo appears in the display with up to three
thumbnails of other images.
4.
Press the Options soft key, then select Send. The Send
5.
Select Picture Message. The Create Pic Msg screen then
menu appears in the display.
appears in the display with the Send To list highlighted.
Switch From Expanded to Thumbnail Mode
1.
In standby mode, press and hold the Camera-Music Player
6.
Enter the recipient’s phone number or e-mail address
using the keypad or find and select a Contact by pressing
the Add soft key.
your photos.
Camera
74
7.
Press
OK
to save the address(es) and move to the Subject
field. Use the Navigation keys to move to the other
message fields. (For more information, refer to “Send
Picture Messages in Camera Mode” on page 50.)
8.
When you are finished composing your message, press
SEND ( OK ) to send the Picture message to the intended
recipients.
75
Section 11: Multimedia
This section outlines your phone’s multimedia functions and key
features associated with multimedia.
Accessing Multimedia
1.
In standby mode, press Menu, then select Multimedia.
The following Multimedia options appear in the display:
• Camera — Lets you launch and set up your phone’s camera. (For
more information, refer to “Camera” on page 65.)
• My Images — Lets you choose the multi-media or pictures that
appear in your phone’s display.
• Music Player — Lets you play music (MP3 and unprotected AAC,
AAC+, WMA) files.
• My Ringtones — Lets you assign melody tones for calls, alarms,
and other alerts.
• My Sounds — Lets you assign melody tones for calls, alarms,
and other alerts.
• Ringback Tones — Lets you download and assign ringback tones.
2. Select an option to enter its sub-menu. The following
sections describe the above listed sub-menus in greater
My Images
My Images lets you choose the pictures that appear in your
phone’s display while in standby mode (wallpaper) and as picture
IDs for your contacts.
1.
From the Multimedia menu, select My Images.
• If there are no pictures stored in your phone or on a Memory Card,
“No Image” appears in the My Images screen. [To launch the
camera to take a picture, press the Camera soft key. (For more
information, refer to “Camera” on page 65.)]
• If there are pictures stored in your phone, up to four thumbnail
images of your pictures appear in the display.
Tip: You can also access My Images from:
-The Camera screen, by pressing the My Images soft key.
-The Edit Contact screen, by selecting the picture ID field and pressing
Set ( OK ).
2.
Highlight a picture and press VIEW ( OK ) to expand the
3.
Press the Options soft key. A pop-up menu containing the
selected picture to fill the screen.
detail.
following options appears in the display:
Multimedia
76
• Send — Lets you send the selected image to a specified recipient
in a Picture Message or to another device Via Bluetooth.
• Set As — Lets you assign the selected picture as the Main
Wallpaper or as the Picture ID for a Contact.
• Rename — Lets you rename the picture.
• Copy — Copies the picture to Phone memory or to an optional
Memory Card.
• Move — Moves the picture to Phone memory or to an optional
Memory Card.
• Lock / Unlock — Lets you protect the picture from being deleted.
• Erase — Erases the selected, unlocked picture.
• Erase All — Erases all unlocked pictures.
• Photo Info — Displays information about the picture, such as the
picture Name, creation Date and Time, Resolution, and the data
Size.
4. Select an option.
5.
To return to the previous menu, press
standby mode, press
. To return to
.
Using Your Music Player
Music Player lets you play MP3 and unprotected AAC, AAC+,
WMA music files, loaded onto an optional microSD™ Memory
Card using a personal computer. (For information on loading
music files on a Memory Card, see “Loading Music Files” on
page 79.)
77
Launching the Music Library Menu
1.
In standby mode, press
OK
or
, then select
Multimedia ➔ Music Player. The Library menu appears
in the display showing the following options:
• All — Lists all music files on the Memory Card and lets you play
individual music files or play multiple music files by creating a
temporary music playlist.
• Artists — Lists artist names for music files on the Memory Card
and lets you play one or more music files by a selected artist.
• Albums — Lists album titles for music files on the Memory Card
and lets you play one or more music files from a selected album.
• Genres — Lists music categories for music files on the Memory
Card and lets you play one or more music files of a particular music
category.
• Playlists — Lists any playlists you have saved and lets you create,
save, and manage playlists.
2. Use the Navigation key or Arrow keys to highlight a music
file, then:
• To play the file, press the Play soft key.
• To select the file for playing or other options, press MARK ( OK ).
• To select and apply any of the following options to the highlighted or
marked music file(s), press the Options soft key:
– Mark All — Marks all listed music files for playing, removal, or
assignment of player settings.
– Remove — Deletes highlighted or marked music file(s) from the
Memory Card.
– Properties — Lists the title, artist, album, genres, copyright
information, time length, file size, and bit rate of the highlighted music
file.
– Player Settings — Lets you assign a particular Visualizer to
highlighted or marked music file(s).
Select the desired option.
Playing Music
1.
At the Multimedia menu, select Music Player. The Library
screen appears in the display, showing the following
options:
•
•
•
•
•
All
Artists
Albums
Genres
Playlists
2.
Highlight the desired option,
press VIEW ( OK ), and then do
one of the following:
• All option — Highlight a music
file, then press the Play soft key
to play the file.
Tip: To play additional files, use the Left and
Right navigation keys, or highlight and
mark additional files for playback. (For
more information, see “Launching the
Music Library Menu” on page 77.)
• Other options — Use the Navigation key to highlight an Artist,
Album, Genre, or Playlist, then press VIEW ( OK ).
Use the Navigation key to highlight a music file, then press the Play soft
key to play the file.
The Music Player screen appears in the display and the
selected music file/playlist begins playing.
Multimedia
78
Music Player Controls
• Volume key:
– To play a music file louder,
press the Volume key Up.
– To play a music file softer,
press the Volume key Down.
• Navigation key:
– To pause/resume playing a
music file, press OK .
– To stop playing a music file, press the Down navigation key.
– To skip play to an earlier music file in the selected list, press the Left
navigation key.
– To skip play to a later music file in the selected list, press the Right
navigation key.
– To return to the selected list and choose another music file to play,
press the Up navigation key.
• Library soft key — Returns you to the Library screen.
• Options soft key — Shows the following sub-menus and options:
– Play Mode — Lets you change the play mode from Normal, Shuffle,
Repeat One, Repeat All, or Shuffle Repeat All.
– Add to Playlist — Moves you to the Playlists menu to let you add the
selected music file to a playlist.
– Remove — Deletes the selected music file from the Memory Card
79
– Properties — Lists the title, artist, album, genre, copyright
information, time length, file size, and bit rate of the highlighted music
file.
– Visualizer — Lets you change the Music Player visualization to Simple
View, Equalizer, Album Art, or Lyrics.
– Memory Info — Displays the Memory Usage screen which lists
Memory Card usage and availability amounts.
Select the desired option to launch the option or to access the submenu.
Loading Music Files
To transfer music to a microSD™ Memory Card, do the
following:
1.
Before loading music files on a Memory Card, do the
following:
• With your phone powered off, insert the Memory Card into your
phone. (For more information, see “Install a Memory Card” on
page 7.)
• Power your phone on.
• When the Memory Card icon (
) appears in the display, remove
the Memory Card from your phone. (For more information, see
“Remove a Memory Card” on page 8.)
2. Insert the Memory Card into a compatible card reader.
Note: Card readers vary. Follow the installation instructions included with
your card reader and personal computer.
3.
Open the Memory Card reader drive and the “My_Music”
folder.
4.
5.
Drag or download music (MP3) files into the “My_Music”
-A Set Alarm screen by selecting the Ringer option, highlighting the
second (file name) field, pressing the Left or Right navigation key, and
selecting My Ringtones.
-The Edit Contact screen by selecting the Ringtone field, pressing the
Set soft key, and selecting My Ringtones.
folder.
2.
Remove the Memory Card by following the removal
• Press OK to PLAY the ringtone.
• Press the Options soft key to show the file name and file type.
3. Press the Set As soft key to assign the highlighted
instructions for the Memory Card reader and for your
personal computer.
6.
Tip: You can also access My Ringtones from:
ringtone. The following options appear in the display:
Insert the Memory Card into your phone. (For more
• Ringtone — Lets you assign the selected ringtone to incoming
voice calls.
• Contact ID — Lets you assign the selected ringtone as the
distinctive ringer for a Contact.
• Alert Tone — Lets you assign the selected ringtone to All Msg,
Text Msg, Picture Msg, or Voicemail Msg.
Select an option.
information, see “Install a Memory Card” on page 7.)
My Ringtones
My Ringtones lets you assign ringtones (preloaded and
downloaded) for calls, alerts, and as distinctive ringers for
Contacts.
1.
From the Multimedia menu, select My Ringtones. A list of
ringtones appears in the display.
Use the Navigation key to highlight a particular ringtone.
4.
When using a downloaded ringtone, press the Options soft
key and the following options appear in the display:
• Lock / Unlock — Lets you prevent/permit file deletion.
• Erase — Erases the selected file.
• Rename — Lets you rename the selected file.
Multimedia
80
• Ringtone Info — Displays information about the selected file,
such as the file name, the file type, and the data size.
• Get More Ringtones — Launches the Browser so that you can
download ringtones.
Select an option.
5.
Press
to return to the previous menu, or press
to
return to standby mode.
My Sounds
My Sounds lets you record voice memos and lets you assign
preloaded and downloaded sound files as ringers for calls,
alarms, and other alerts.
1.
From the Multimedia menu, select My Sounds. Record
New and a list of sound files appears in the display.
Tip: You can also access My Sounds from:
-A Set Alarm screen by selecting the Ringer option, highlighting the
second (file name) field, pressing the Left or Right navigation key, and
selecting My Sounds.
-The Edit Contact screen by selecting the Ringtone field, pressing the
Set soft key, and selecting My Sounds.
2.
Select Record New, then press
OK
to record a voice
memo. (See “Voice Memo” on page 82. for more
information.)
81
3.
Press the Options soft key.
• For a recorded sound file, a pop-up menu containing the following
options appears in the display:
– Send — Lets you send the selected sound file to a specified recipient in
a Picture message.
– Set As — Lets you assign the selected sound file as the Ringtone or
as the Contact ID for a Contact or an Alert Tone for Text, Picture, or
Voicemail messages.
– Rename — Lets you rename the sound file.
– Lock / Unlock — Lets you protect the sound file from being deleted.
– Erase all — Erases all sound files.
– Sound Info — Displays information about the sound file, such as the
titile, file size, file type, and date.
• For a preloaded sound file, a pop-up menu containing the following
options appears in the display:
– Send — Lets you send the selected sound file to a specified recipient in
a Picture message.
– Set As — Lets you assign the selected sound file as the Ringtone or
as the Contact ID for a Contact or an Alert Tone for Text, Picture, or
Voicemail messages.
– Erase all — Erases all sound files.
– Sound Info — Displays information about the sound file, such as the
title, file type, and the data size.
• For a downloaded sound file, the following options appear in the
display:
– Set As — Lets you assign the selected sound file as the Ringtone or
as the Contact ID for a Contact or an Alert Tone for Text, Picture, or
Voicemail messages.
– Rename — Lets you rename the sound file.
– Lock / Unlock — Lets you protect the sound file from being deleted.
– Erase all — Erases all sound files.
– Sound Info — Displays information about the sound file, such as the
title, file type, and the data size.
2.
Press
3.
Press REC ( OK ), then start speaking. As it is recording the
Press the
the
OK
remaining for the recording.
• To pause the memo, press the Pause soft key. When a memo is
paused, select Resume to continue recording.
4. Press SAVE ( OK ) once you’re finished recording. The new
recording is saved, and the My Sounds menu appears in
key to return to the previous menu, or press
key to return to standby mode.
Voice Memo
. The Record New screen appears in the display.
phone displays a countdown timer that shows the seconds
Select an option.
4.
OK
the display.
Review Voice Memos
If you’ve saved any voice memos, you can review them anytime.
You can use your phone to record voice memos for later
playback.
1.
Note: The maximum length for a single voice memo is 60 seconds.
2.
Highlight the voice memo you wish to review.
3.
Press PLAY ( OK ) to play the voice memo.
You can save as many voice memos as will fit in the empty
memory capacity.
Record a Voice Memo
1.
From the Multimedia menu, select My Sounds. A list of
From the Multimedia menu, select My Sounds. A list of
sound files appears in the display.
• To stop playing the memo, press STOP ( OK ). Press OK again to
restart playing the memo.
When the voice memo finishes playing, the selected voice
memo remains highlighted in the list of sound files.
sound files appears in the display with Record New
highlighted.
Multimedia
82
Erase One Voice Memo
1.
2.
3.
From the Multimedia menu, select My Sounds. A list of
key.
Press the Erase soft key. “Erase Sound?” appears in the
To erase the selected voice memo, press the Yes soft key.
From the Multimedia menu, select My Sounds. A list of
sound files appears in the display.
Highlight a voice memo, then press the Options soft key.
The following options appear in the display:
• Send — Lets you send a copy of this voice memo as part of a
Picture Message or to another device Via Bluetooth.
• Set As — preloaded sound files only — Lets you set this sound file
as a Ringtone, Contact ID ringer, or Alert Tone.
• Rename — Lets you change the name of this voice memo.
• Lock/Unlock — Blocks/permits erasure of this voice memo.
• Erase all — Erases all unlocked sound files that are not preloaded.
• Sound Info — Shows you the titile, file size, file type, and date for
this sound file.
83
To erase all unlocked the sound files, press the Yes soft
key. To return to the list of sound files, press the No soft
To return to the list of sound files, press the No soft key.
2.
4.
Highlight the voice memo you wish to erase.
Erase All Voice Memos at One Time
1.
Select Erase all. “Erase All Sounds?” appears in the display.
sound files appears in the display.
display.
4.
3.
Section 12: Tools
This section explains how to use your phone’s digital assistant
functionality to schedule events, set reminders, create a “to do”
list, perform calculations, and more.
Tools Menu
Tools is a suite of Personal Information Management (PIM)
applications such as a Calendar, To Do List, and Memo Pad that
run on your phone. You can use your phone to schedule events,
set reminders, create a to do list, perform calculations, and more
with the functions provided by this useful feature.
Opening Tools Menu
1.
In standby mode, press Menu, then select Tools. The
following sub-menus appear in the display:
• Bluetooth — Lets you access Bluetooth functions.
• Calendar — Lets you view the current, past, or future month in a
monthly calendar layout.
• Memo Pad — Lets you store and review useful information.
• Alarm Clock — Lets you set an alarm to go off once, or daily, at a
specified time.
• World Time — Lets you view the current time of day or night in
another part of the world.
• Calculator — Lets you perform calculations, including addition,
subtraction, multiplication, and division.
• Stop Watch — Lets you view the amount of time.
• Converter — Lets you convert currencies (according to the latest
rates) and weights, measures, and temperatures from one system
or increment to another.
• Tip Calculator — Lets you quickly calculate service gratuities with
a minimum of keypresses.
2. Highlight an application, then press OK .
The following sections provide detailed descriptions of the
applications and how to use their functions.
Bluetooth
Bluetooth is a short-range wireless communications technology
capable of exchanging information over a distance of about 30
feet without requiring a physical connection.
Unlike infrared, you don't need to line up the devices to beam
information with Bluetooth. If the devices are within a range of
one another, you can exchange information between them, even
if they are located in different rooms.
The Bluetooth wireless technology settings menu provides the
ability to view and change the device name, show the visibility,
and set the security for the device.
Tools
84
Turn Bluetooth On/Off
When the Bluetooth is turned on, you can use the Bluetooth
features available. When the Bluetooth is turned off, you cannot
send or receive information via Bluetooth. To save battery life or
in situations where Bluetooth use is prohibited, such as airline
traveling, you can turn off the Bluetooth wireless technology
headset.
3.
device user manual for more information.)
4.
OK
. Names of the available devices appears in the
5.
Highlight the device you want to pair with your phone.
6.
Press PAIR ( OK ) to pair the selected device with the phone.
You are prompted to enter the passkey or PIN for the
To search for available Bluetooth devices:
selected device.
From the Tools menu, select Bluetooth. The following
options appear in the display:
• Add New Device
• Registered List
• Bluetooth Settings
2. Select Add New Device.
If Bluetooth is off, you are prompted to “Turn bluetooth
on?”.
• To leave Bluetooth off and return to the Bluetooth menu, press the
No soft key.
• To turn Bluetooth on, press the Yes soft key.
“Place device you are connecting to in discoverable mode”
appears in the display.
85
Press
display.
Add New Device
1.
Place the Bluetooth device in discoverable mode. (See the
Note: When pairing you phone with another Bluetooth device other than a
headset or headphones, the same passkey or PIN must be entered on
both devices (when prompted) for the pairing to succeed.
7.
Enter the device passkey or PIN and press
OK
.
Registered List
This menu provides a list of Bluetooth wireless technology
devices discovered by your handset.
1.
From the Tools menu, select Bluetooth ➔ Registered
List. A list of registered devices appears in the display.
Calendar
Connecting to a Bluetooth Device
From the Device list,
1.
Highlight the device and press
2.
If you are unable to pair with the device a popup appears in
OK
.
the display. Press the Yes soft key to retry.
Bluetooth Settings
1.
Calendar lets you view the current, past, or future month in a
monthly calendar layout. While viewing the calendar, the current
date is highlighted and days with scheduled events are
surrounded by a box.
View an event
1.
From the Tools menu, select Bluetooth ➔ Bluetooth
A calendar appears in the display with the current date
Settins. The following options appear in the display:
Enable/Disable
Selecting this option turns Bluetooth on or off.
Discovery Mode
Allows other users to see your accessibility. Select On for other
devices to see your device for 1 minute, or Off for no visibility.
Device Name
Shows the handset name. To change this name, enter a new
name and press OK .
Supported Profiles
Lists and explains the Bluetooth profiles your phone supports.
Device Info
Shows the Bluetooth Type, Status, and Address of your phone.
From the Tools menu, select Calendar.
highlighted. The month and year also appear.
2.
Use the Navigation key to move around within the calendar
screen. The following controls are also available:
•
•
•
•
•
Press the Add soft key to add an event to the highlighted date.
Press OK to open the highlighted date.
To view previous months, press the Volume key Up.
To view future months, press the Volume key Down.
Press the navigation keys to move to an individual day, one day or
one week at a time.
• Press the Options soft key while viewing the calendar. The
following options appear in the display:
– Go to Date — Lets you jump to any date you specify.
– Go to Today — Lets you jump to any date you specify.
– Erase Old — Lets you erase past events.
– Erase all — Lets you erase all events.
Tools
86
Memo Pad
Select the desired option to perform the related process.
Add a New Event
1.
From the Tools menu, select Calendar.
A calendar appears in the display with the current date
highlighted. The month and year also appear.
2.
Highlight the date of the new event, then press the Add
You can create a notes and store them in Memo Pad. You can’t
prioritize or set an alert for stored notes. Return to Memo Pad
anytime you wish to review and edit your notes.
Add a Memo
1.
If you have any stored memos, they appear as a list in the
soft key. The New Event screen appears in the display.
3.
display. If this is your first time in Memo Pad, “No memos”
Use the Navigation key and the keypad to select and enter
appears in the display.
details of the event. (For more information, refer to
2.
“Entering Text” on page 33.)
From the Tools menu, select Memo Pad.
To add a new memo, press the Add soft key. A numbered
Memo screen appears in the display.
Note: Enter the dates and times for the event using 2 digits for day, month,
hour, and minute entries. Use 4 digits for year entries.
3.
refer to “Entering Text” on page 33.)
Use the Left/Right navigation keys to change between AM and PM.
4.
Tip: You can also press
4.
for AM or press
When you’re finished entering details for the memo, press
OK
for PM.
When you’re finished entering event details, press
Enter a memo using the keypad. (For more information,
OK
to
store the event in your calendar.
to save your memo.
View, Edit, and Erase Memos
䊳
From the Tools menu, select Memo Pad, then highlight a
memo.
Note: If you set a notification Alert, an alert (tone/vibration/light) will notify
you prior to the event.
87
• To view the memo, press VIEW ( OK ).
• To edit the memo you are viewing, press the Edit soft key.
• Edit the memo using the keypad. (For more information, refer to
“Entering Text” on page 33.)
• To erase the memo you are viewing, press the Options soft key,
then select Erase. You are prompted to verify the erasure.
– To erase the memo, press the Yes soft key.
– To keep the memo, press the No soft key.
Alarm Clock
Your phone has an alarm clock that can be set to go off once, or
daily at a specified time. Once set, the alarm clock is easy to
change or turn off completely.
Note: The alarm doesn’t function when the phone is turned off. If the time for
an alarm that was set for Once has elapsed and the phone is off, the
alarm occurs at the same time on the following day.
1.
From the Tools menu, select Alarm Clock. The following
options appear in the display:
• Alarm 1
• Alarm 2
• Alarm 3
2. Use the navigation keys to highlight an Alarm selection,
then press
OK
. A Set Alarm screen appears in the display
containing the following options:
• Alarm — Turns the alarm Off or On.
• Time — Use the numeric keys to enter the time, and use the Left
and Right navigation keys to select AM or PM.
• Frequency — Lets you repeat the alarm Daily, Mon – Fri,
Weekends, or Once.
• Ringer — Lets you set the alarm ringer to a particular Tone, to
Vibrate, or to Light Only.
3. Use the Up and Down navigation keys to select options,
and use the Left and Right navigation keys to select values
for the options.
4.
Use the keypad to enter the time for the alarm.
5.
When you’re finished
icon (
OK
. The alarm is set and the alarm
) appears in the top line of the display.
When an Alarm Sounds
An animated alarm clock appears in the display with the options
Snooze or Dismiss, and an alert sounds when the specified time
for the alarm arrives.
䊳
Use the Navigation key to highlight Dismiss, then press
OK
to silence the alarm.
• If the alarm was set as a Daily alarm, the alarm icon remains in the
top of the display.
• If the alarm was set as a Mon.-Fri. alarm, the alarm icon remains in
the top of the display.
Tools
88
• If the alarm was set as a Weekends only alarm, the alarm icon
remains in the top of the display.
• If the alarm was set as a Once only alarm, the alarm icon
disappears from the top of the display.
Disabling Alarms
• Alarm 2
• Alarm 3
2. Select an active Alarm selection.
3.
Highlight an active alarm.
Turn Off the Alarm
4.
Press the Options soft key. The following options pop-up
Turning an Alarm to Off allows you to retain the current settings
for later reuse.
1.
From the Tools menu, select Alarm Clock. The following
options appear in the display:
• Alarm 1
• Alarm 2
• Alarm 3
2. Select an active Alarm selection. The associated Alarm
screen appears in the display with the Alarm option
highlighted.
3.
Use the Left/Right navigation keys to select Off, then press
OK
. The selected alarm is turned off.
Reset the Alarm(s)
1.
From the Tools menu, select Alarm Clock. The following
options appear in the display:
• Alarm 1
89
in the display:
• On / Off — Enables/disables the highlighted Alarm using the
current settings.
• Reset Alarm — Disables the highlighted Alarm and resets its
settings to default values.
• Reset All — Disables all Alarms and resets all of their settings to
default values.
5. Use the navigation keys to highlight the desired option,
then press
OK
.
World Time
World Time lets you view the time of day or night in another part
of the world. World Time displays time in any of 45 different cities
and/or time zones around the world.
1.
From the Tools menu, select World
Midway
Time. A world map appears in the
HAST/HADT:
AKST/AKDT: PST/PDT:
Honolulu
Alaska
display.
2.
Use the Left/Right navigation keys to
display the time zone and city that
MST/MDT:
CST/CDT:
you wish to view.
Denver
Arizona
Dallas
Chicago
Houston
Mexico City
The following time zones/cities are supported:
EST/EDT:
Caracas
Brasilia
Mid Atlantic
Detroit
Washington
D.C
New York
Montreal
Boston
Cape Verde
3.
Seattle
San Francisco
Los Angeles
Press the Options soft key and select to display (DST On)
or not display (DST Off) Daylight Savings Time (DST) for
the selected time zone.
4.
London
Paris
Rome
Jerusalem
Berlin
Athens
Helsinki
Moscow
Baku
Abu Dhabi
Tashkent
Alma-ata
Bangkok
Jakarta
Hong Kong
Beijing
Seoul
Tokyo
Guam
Sydney
Okhotsk
Wellington
Samoa
Do one of the following:
• To set the selected time zone as the home time zone for your
phone, press OK .
• To return to the Tools menu without setting a new home time zone,
press .
Calculator
You can perform calculations, including addition, subtraction,
multiplication, and division using your phone.
Tools
90
1.
From the Tools menu, select Calculator. The Calculator
appears in the display.
2.
Enter the first number in your equation using the keypad
(numbers can be up to nine digits long).
• Press
to enter a decimal point. (Calculator only accepts 2
digits after a decimal point.)
• Press
to change the sign for a number to a negative.
3. Use the Navigation key to set the type of calculation that
To perform another calculation, press the Clear soft key.
Stop Watch
You can use this menu to set a stop watch.
1.
From the Tools menu, select Stop Watch.
2.
Press
3.
Press the Record soft key at the start of each succeeding
equation.
For additional equation entry options, press the Operator
soft key. The following options appear in the display:
• ( — Beginning of nested equation
• ) — End of nested equation
• Power — Raise the entered number to a power
5. Press OK to perform the calculation and view the result.
91
to start, stop, and resume the stopwatch count.
event/lap to record the completion time for the previous
event/lap.
you wish to perform. Your choices are as follows:
• Up navigation key — [x] Multiplication
• Left navigation key — [-] Subtraction
• OK key — [=] Equals/Total
• Right navigation key — [+] Addition
• Down navigation key — [÷] Division
4. Use the keypad to enter the second number into your
OK
4.
Press the Reset soft key to erase all stop watch (lap) times
recorded.
Converter
The conversion menu provides the following conversion
categories:
• Currency
• Length
• Weight
• Volume
• Area
• Temperature
To convert a currency, length, weight, volume, area, or
temperature, do the following:
1.
From the Tools menu, select Converter and the
5.
conversion feature you wish to use.
2.
Use the Navigation key to select the units to be converted
in the display.
6.
From and To.
3.
information, refer to “Entering Numbers” on page 35.)
7.
Press
The converted quantity appears in the To field.
8.
Press
key.
Currency — Reviewing/Editing Exchange Rates
The Currency Converter includes long-term average exchange
rates as default values. To review and/or change a default
exchange rate to the current exchange rate, do the following:
1.
From the Tools menu, select Converter ➔ Currency.
2.
Press the Rate soft key. The Exchange Rate list for the
USD currency appears in the display.
to save the changed exchange rate.
to return to the Currency Converter screen.
You can use the Currency Converter to convert from and to
obscure currencies by adding exchange rates for these
currencies. To add a currency and its exchange rate to the
Currency Converter, do the following:
1.
From the Tools menu, select Converter ➔ Currency.
2.
Press the Rate soft key. The Exchange Rate list for the
USD currency appears in the display.
3.
Press the Add soft key. The ADD EXCHANGE RATE screen
appears in the display with the Base field highlighted.
4.
Use the Up/Down navigation keys to highlight the currency
Exchange Rate to be changed.
OK
Currency — Adding Exchange Rates
Use the Left/Right navigation keys to display the Exchange
Rate list for the currency to be converted From.
4.
Use the keypad to change the exchange rate. (For more
Enter the quantity you want converted in the From field.
Note: To include a decimal point, press the
3.
Press EDIT ( OK ). The EDIT EXCHANGE RATE screen appears
Use the Left/Right navigation keys to select the Base
currency to be converted from.
5.
Press the Down navigation key to highlight the Currency
field.
Tools
92
6.
Enter an identifier of up to 5 characters for the new
3.
currency using the keypad. (For more information, refer to
“Entering Text” on page 33.)
7.
8.
exchange rate to be erased.
4.
Press the Down navigation key to highlight the Exchange
Rate field.
5.
To erase the selected exchange rate, press the Yes soft
Enter a decimal exchange rate or the new currency using
key.
the keypad. (For more information, refer to “Entering
To return to the Exchange Rate list without erasing the
Note: Press the
key to enter the decimal point.
The Exchange Rate field only accepts two digits after the decimal
point.
Press SAVE ( OK ) to save the new exchange rate.
Currency — Erasing Exchange Rates
You cannot erase the preloaded currencies from the Exchange
Rate list. You can erase a currency that you have added to the list
by doing the following:
93
Press the Erase soft key. You are prompted to confirm the
erasure.
Numbers” on page 35.)
9.
Use the Up/Down navigation keys to highlight the currency
selected exchange rate, press the No soft key.
Tip Calculator
Tip Calculator automatically calculates the following amounts:
• Gratuity (tip)
• Individual payment (for groups)
Calculations are based on the total amount of the check, a
selected percentage, and the number of people paying.
1.
From the Tools menu, select Tip Calculator. The Tip
Calculator screen appears in the display with the Bill field
highlighted.
1.
From the Tools menu, select Converter ➔ Currency.
2.
Press the Rate soft key. The Exchange Rate list for the
more information, refer to “Entering Numbers” on
USD currency appears in the display.
page 35.)
2.
Use the keypad to enter the total amount of the bill. (For
3.
If needed, press the Down navigation key to highlight the
Tip field.
4.
Use the keypad to enter a tip percentage. (For more
information, refer to “Entering Numbers” on page 35.)
5.
If needed, press the Down navigation key to highlight the #
Paying field.
6.
Use the keypad to enter the number of persons paying.
(For more information, refer to “Entering Numbers” on
page 35.)
7.
The amount of the Tip, the bill Total, and the amount Each
person should pay appear in the lower half of the screen.
Tools
94
Section 13: Voice SVC
This section explains how to use your phone’s digital assistant
functionality to schedule events, set reminders, create a “to do”
list, perform calculations, and more.
Launching Voice Service
VoiceSignal is state-of-the-art voice recognition software for your
mobile phone that lets you dial numbers, lookup contact
information, and open applications using your voice. To access
your phone’s voice settings, do the following:
1.
In standby mode, press Menu, then select Voice SVC. The
following options appear in the display:
• Voice Commands—Lets you place calls, access your Contacts
List, review your appointments, and more by speaking commands
into your phone. Also see “Voice Dialing” on page 21 and “Voice
Method” on page 37 for more information.
• Voice Settings—Lets you tailor VoiceSignal to better respond to
your voice and your phone use preferences.
2. Highlight the desired sub-menu, then press OK .
Voice Commands
To start VoiceSignal, do one of the following:
• In standby mode, press and hold the
key.
• From the Voice SVC menu, select Voice Commands.
95
“Say a Command” appears in the display and is pronounced through
the earpiece, followed by a list of available commands.
Note: You can also set your phone to start VoiceSignal when you open the
phone. (For more information, refer to “Voice Launch” on page 99.)
VoiceSignal includes the following commands:
• Call — Lets you dial the phone by saying any name stored in your
contact list, without ever having to record, or “train” that name.
VoiceSignal automatically voice-activates all your contacts, even if you
have hundreds of them stored on your phone. You can also dial any
telephone number, even if it is not stored in your contact list, by saying
the digits in the number. (For more information, refer to “Voice
Dialing” on page 21.)
• Send Text — Lets you launch the Create Text Msg screen. (For more
information, refer to “Create and Send Text Messages” on
page 49.)
• Send Picture — Lets you launch the Create Pic Msg screen. (For more
information, refer to “Send Picture Messages in Standby Mode”
on page 52.)
• Lookup — Lets you look up and display contact information for any
name stored in your Contacts list by saying the name. (For more
information, refer to “Finding a Contacts Entry” on page 37.)
• Go to — Lets you access the Voice Memo, Calendar, and Contacts List
Voice Settings
features of your phone. (See “Voice Memo” on page 82, “Calendar”
on page 86, and “Contacts” on page 36 for more information.)
• Check — Lets you check your phone's status (that is, network
coverage, signal strength, and battery in the same report), network
coverage, signal strength, battery, and phone number.
Choice Lists
Note: Speaking clearly, say the command that you want to use. If, after a few
seconds, the device has not recognized a command, it prompts you to
repeat the command. If, after a few more seconds, it still has not
recognized a command, it tells you “Sorry, no match found,” and
cancels voice recognition.
Voice Command Tips:
• Make sure you wait for the beep before speaking.
• Speak clearly at a normal volume, as if you were talking on the phone.
Voice-Activating Your Contacts List
When you first start VoiceSignal, it reads your Contacts list and
voice-activates all the names stored there. When you have add or
change contacts, VoiceSignal automatically reloads and voiceactivates the entire list.
Ending Calls Before Restarting the VoiceSignal Software
When you use VoiceSignal to make a call, you must end that call
before you can use VoiceSignal again.
VoiceSignal uses choice lists when it is not confident it has
correctly recognized a name or number. In this case, it can
display a list of up to three possible choices, and prompt you to
confirm the correct one.
You can change the way that VoiceSignal uses choice lists with
name dialing, digit dialing, and contacts. For each feature, you
can choose to always see a choice list (even if there is only one
choice), or never see a choice list (even if there are multiple
choices). If you leave the setting at “Automatic,” VoiceSignal
displays a choice list only when it is not confident it has correctly
recognized the name or number.
To change the way VoiceSignal uses choice lists:
1.
From the Voice SVC menu, select Voice Settings ➔
Choice Lists the following options appear in the display:
• Automatic—VoiceSignal displays a choice list only when it is not
sure if it has correctly recognized the name or number.
• Always On—VoiceSignal always displays a choice list, even when
there is only one choice.
• Always Off—VoiceSignal never displays a choice list.
Voice SVC
96
Use the navigation keys to highlight the Choice List
behavior you prefer, then press the
OK
key to accept the
new setting.
Sensitivity
1.
From the Voice SVC menu, select Voice Settings ➔
Sensitivity. The Sensitivity screen appears in the display.
2.
Use the Up/Down navigation key to adjust the Sensitivity
setting to Reject More spoken commands or names or to
Reject Less spoken commands or names.
3.
To accept the new setting, press the OK soft key.
Digit Dialing
If you regularly have trouble with VoiceSignal not recognize the
numbers you say, try adapting digit dialing to your voice.
Adapting can improve the accuracy of digit recognition,
especially for people with strong regional accents.
Note: After you adapt Digit Dial, your phone is customized to your voice, and
your voice only. Others will not be able to use it unless they reset the
phone to factory defaults.
Adaptation involves recording several sequences of four digits
each. The recording process takes about a minute.
97
Tips for Adapting Digit Dialing
• Use Adapt Digits in a quiet place.
• Make sure you wait for the beep before starting to speak.
• Speak clearly, and say each digit distinctly.
• If you make a mistake while recording a sequence of digits, or if there
is an unexpected noise that spoils the recording, re-record that
sequence.
• Only adapt digits if you are regularly having problems with digit dialing.
Once you adapt, digit dialing will not work as well for other people
using your phone. (You can always reset digit adaptation to its original
state, as described below.)
Adapt Digits
To adapt digit dialing, do the following:
1.
From the Voice SVC menu, press Voice Settings ➔ Digit
Dialing. The following options appear in the display:
• Adapt Digits
• Reset Digits
2. Select Adapt Digits. Your phone displays the first digit
sequence and “Please say” plays through the speaker
followed by the four digits appearing in the display.
3.
Wait for the beep and say the digits using your normal tone
digit adaptation rest.
To reset your digit adaptation, press the OK soft key. To
• If the recording was good, say “Yes.”
• If you need to re-record, say “No.”
If you say “No,” the phone prompts you to pronounce the
cancel and retain your digit adaptation, press the Back
Repeat this step until you’re satisfied with the recording.
5.
After confirming that the recording sounds “ok”, continue
soft key.
Sound
Sound lets you specify what (if any) text prompts you want your
phone to read to you through the earpiece.
1.
From the Voice SVC menu, select Voice Settings ➔
the recording process with the next set of digits.
Sound. The following options appear in the display:
After 10 sets of digits, “Adaptation complete” plays
•
•
•
•
through the speaker and you are returned to the Digit
Dialing menu.
Reset Digits
To reset digit dialing to factory default settings, do the following:
1.
Select Reset Digits. The phone prompts you to confirm
recording and prompts “Did the recording sound ok?”
digits again. Wait for the beep and then say the digits.
4.
2.
of voice. After a moment, the phone plays back the
From the Voice SVC menu, select Voice Settings ➔ Digit
Prompts — Enables or disables audio prompts.
Digits — Enables or disables audio digit playback.
Names — Enables or disables audio name playback.
Name Settings — Lets you adjust the speed and volume of your
phone’s audio name playback.
2. Highlight the desired setting.
3.
Press
OK
to accept the new setting.
Dialing.
The following options appear in the display:
• Adapt Digits
• Reset Digits
Voice SVC
98
Voice Launch
To set the key or action that launches VoiceSignal, do the
following:
1.
From the Voice SVC menu, select Voice Settings ➔ Voice
Launch. The following options appear in the display:
• Key Only — Press and hold
to activate VoiceSignal for one
call.
• Key / EarMic — Attach a headset to your phone. Press and hold
to activate VoiceSignal. Now, you can make and end calls
using VoiceSignal by pushing the button on the headset. Press
to release VoiceSignal.
2. Highlight the option you want, then press OK to save and
exit.
About VoiceSignal
This option causes the About VoiceSignal screen to appear in
the display, showing version and build information about the
VoiceSignal software included on your phone.
䊳
From the Voice SVC menu, select Voice Settings ➔ About.
The About VoiceSignal screen appears in the display
showing the version level of the VoiceSignal software
currently installed on your phone.
99
Section 14: Changing Your Settings
This section explains how to customize your phone to suit your
needs and preferences.
2.
Accessing Your Settings
䊳
To access your phone’s settings from standby mode, do
one of the following:
• Press the Settings soft key.
• Press Menu, then select Settings.
The Settings menu appears in the display.
Location
This function identifies your location to the network via the Global
Positioning System (GPS). You can set this function for
continuous operation or to operate only in the event that you dial
911.
Note: Contact your Wireless Provider to determine whether, when, or where
location-based services are available.
1.
At the Settings menu, select Location.
The following options appear in the display:
• Location on — GPS location setting is on whenever you make or
receive a call, wherever the feature is available.
• 911 Only — GPS location setting is on only when you dial 911.
Select the desired Location setting. You’re returned to the
Settings menu.
Display Settings
Using the Display menu, you can set the menu style, set the
standby mode animation, customize the backlight settings, and
more.
1.
At the Settings menu, select Display Settings. The
following options appear in the display:
• Menu Style — Lets you choose whether the Main Menu appears
as a matrix of icons or as a list of menus.
• Wallpaper — Lets you choose the picture(s) or animation that
display(s) on your phone when in standby mode.
• Clock Format — Lets you choose whether to show the time in the
display in digital or analog format.
• Theme — Lets you select the main menu color scheme.
• Dialing Font Size — Lets you choose how the number will display
on the display screen.
• Banner — Lets you create your own personalized greeting that
appears in the display when your phone is in standby mode.
• Backlight — Lets you set backlight options for the Main Display,
the Keypads, and Charging, and set the Brightness.
Changing Your Settings
100
2.
Select the desired display option. The following sections
2.
describe the above listed display sub-menus in greater
detail.
animations appear in the display.
3.
Menu Style
Menu Style allows you to choose how main menus appear in your
display.
1.
At the Settings menu, select Display Settings ➔ Menu
Style. The following options appear in the display:
• Icon — Display main menus as icons.
• List — Display main menus in a list format.
2. Select the desired setting.
to
Clock Format
Clock Format lets you choose whether to show the time in the
display in digital or analog format.
1.
From the Settings menu, select Display Settings ➔ Clock
Format. The following clock format options appear in the
display:
• Digital — Large numerical time and date display
• Analog — 12-hour clock face with moving hour and minute
hands
• Off — Default small digital time and date display
Highlight the desired setting, then press OK to save the
At the Settings menu, select Display Settings ➔
Wallpaper. The following options appear in the display:
setting.
Theme
Theme lets you select the color scheme your phone uses to
highlight menu items and scroll bar positions.
1.
101
OK
when the phone is in standby mode.
Wallpaper lets you choose the pictures that appear in your
phone’s display while in standby mode.
• My Images — Choose a picture to appear in the display when the
phone is in standby mode.
• Preset Images — Choose a preset image to appear in the display
when the phone is in standby mode.
• Slide Show — Choose a pre-loaded, Screen Saver.
Highlight a picture, image, or animation; then press
set the highlighted picture, image, animation to display
Wallpaper
1.
Select the desired option. Up to four pictures, images, or
At the Settings menu, select Display Settings ➔ Theme.
The following options appear in the display:
1.
At the Settings menu, select Display Settings ➔ Banner.
The Banner text entry screen appears in the display.
Note: If necessary, press and hold the
2.
key to erase an existing banner.
Enter a word or short phrase (up to 12 characters) to
appear in your phone’s display while in standby mode. (For
more information, refer to “Entering Text” on page 33.)
2.
Highlight the desired setting, then press
OK
to save the
3.
OK
. To discard your
Backlight
Dialing Font Size
Dialing Font Size lets you select the size of displayed dialed
numbers.
1.
To save the new banner, press
changes, press the Cancel soft key.
setting.
At the Settings menu, select Display Settings ➔ Dialing
You can set the backlight for your display or keypad to remain on
or off or to remain on for a specified period of time.
Note: Prolonged backlight use drains your battery faster.
Font Size. The following options appear in the display:
• Normal
• Large
2. Highlight the desired font size, then press
1.
At the Settings menu, select Display Settings ➔
Backlight. The following sub-menus appear in the display:
OK
to save the
setting.
Banner
Create your own personalized text greeting that appears in the
display while your phone is in standby mode.
• Main Display — Sets the amount of time the main display
backlight remains on with the phone idle. Optional settings are 7,
15, and 30 Seconds and Always On (this setting uses much more
power than the timed settings) and Always Off.
• Keypad — Sets the amount of time the keypad backlight remains
on with the phone idle. Optional settings are 7, 15, and 30 Seconds
Changing Your Settings
102
and Always On (this setting uses much more power than the
timed settings) and Always Off.
• Brightness — Use the Navigation key to select between any of 5
optional settings.
• Charging — Sets display backlight to stay On but dim or to go Off
while charging, according to the time set for Main Display.
2. Select the desired option to launch its sub-menu and
select settings as desired.
Sound Settings
The sound menu provides a variety of options to customize audio
properties for such things as ringers, keypad tones alerts, and
more.
Volume
Use the Volume sub-menu to set the default volume for incoming
calls and alarms, or set the phone to vibrate.
1.
At the Settings menu, select Sound Settings ➔ Volume.
The following options appear in the display:
• Voice Calls — Lets you set the volume and/or vibration for the
incoming calls ringer.
• Messages — Lets you set the volume and/or vibration for the
incoming messages ringer.
• Alarms — Lets you set the volume and/or vibration for the alarm
ringer.
2. Select a Volume option.
103
3.
Use the Volume key (on the left side of the phone) or the
Navigation key to select a volume level (or vibrate mode)
for the selected Volume option.
4.
Press
OK
to save the setting.
Ringer Type
You can assign ringer types and melody tones for calls, alarms,
and other alerts, in the Ringer Type sub-menu.
1.
At the Settings menu, select Sound Settings ➔ Ringer
Type. The following options appear in the display:
• Voice Calls — Lets you set which ringtone or sound file plays
when you receive a voice call.
• Messages — Lets you set which ringtone or sound file plays when
you receive a Text Message, Picture Message, and/or Voicemail
message.
When you select Messages, the following options appear in the
display:
– Text Message
– Picture Message
– Voicemail
– Msg Reminder
2. Select the desired sub-menu.
The following options appear in the display:
• My Ringtones
• My Sounds
3. Select the desired option and highlight a Ringer, then press
OK
to save the changed Ringer setting.
Alerts
3.
OK
to save your selection.
Key Tone
Key Tone lets you adjust the volume level and length of tone that
the keypad generates each time you press a key.
1.
At the Settings menu, select Sound Settings ➔ Key
Tone. The following options appear in the display:
You can set your phone to sound an alert whenever you enter or
leave your service area, connect or disconnect a call, as well as
other options.
1.
Press
At the Settings menu, select Sound Settings ➔ Alerts.
The following Alerts sub-menus appear in the display:
• Minute Beep — Sounds an alert ten seconds before each
elapsed minute of a call.
• Roaming — Sounds an alert when you leave your home service
area.
• Call Connect — When you make a call, an alert sounds when the
call is answered.
• Power On/Off — Plays a melody when you turn the phone on or
off.
• Charge Alert — Plays a melody when you connect the Travel
Adapter and when the battery is fully recharged.
2. Select the desired alert, then use the Navigation key to
highlight On or Off.
• Tone Level (volume)
• Tone Length
Tone Level is highlighted.
2.
Press
OK
to adjust the Key Tone volume.
• Use the Volume key or Navigation key to set the keypad tones
volume.
• Press SET ( OK ) when the desired key tone volume setting is
reached. You are returned to the Key Tone sub-menu.
3. Select Tone Length, then use the Navigation key to
highlight Short or Long.
4.
Press
OK
to save your setting. You are returned to the Key
Tone sub-menu.
Call Settings
You can use Call Settings to select how your phone handles calls,
both voice and data calls.
Changing Your Settings
104
Call Answer
You can select a specific answer mode when you receive an
incoming call. (For more information, refer to “Call Answer” on
page 25.)
Tip: You can set your phone to answer calls automatically, without any input
from you. (For more information, refer to “Auto Answer” on page 105.)
Auto Answer
Auto Answer enables your phone to automatically answer calls
after a period of time that you specify.
1.
At the Settings menu, select Call Settings ➔ Auto
Answer. The following options appear in the display:
• Off — Disables automatic answering of calls.
• After 1 Second — Phone automatically answers calls after 1
second.
• After 3 Seconds — Phone automatically answers calls after 3
seconds.
• After 5 Seconds — Phone automatically answers calls after 5
seconds.
2. Highlight the desired setting, then press OK .
Auto Retry
Auto Retry automatically re-dials a number if the connection
fails. Depending upon your location, the number of times your
phone automatically dials the number may vary.
1.
At the Settings menu, select Call Settings ➔ Auto Retry.
The Auto Retry sub-menu with the following options
appears in the display:
• Off — Disables automatic re-dialing of numbers.
• Every 10 Seconds — Phone automatically re-dials a number
every 10 seconds.
• Every 30 Seconds — Phone automatically re-dials a number
every 30 seconds.
• Every 60 Seconds — Phone automatically re-dials a number
every 60 seconds.
2. Highlight the desired setting, then press OK .
TTY Mode
Your phone is fully TTY compatible. TTY equipment is connected
to your phone through the headset connector on the left side of
the phone. TTY must be enabled before you can use your phone
with a TTY device.
1.
At the Settings menu, select Call Settings ➔ TTY Mode.
You are prompted to confirm you want to change the
current TTY Mode setting.
105
Note: The “Enabling TTY may impair headset use and non-TTY
accessory performance.” message pops up when you select TTY
Mode.
2.
To access the TTY Mode options, press the Yes soft key.
To return to the Call Settings sub-menu, press the No soft
key.
3.
When you press the Yes soft key, the following options
appear in the display:
• TTY Full — Enables TTY mode and disables microphone and
earpiece.
• TTY + Talk — Enables TTY mode and microphone.
• TTY + Hear — Enables TTY mode and earpiece.
• TTY Off — Disables TTY mode.
4. Use the Navigation key to highlight your selection, then
press
OK
to save your selection and return to the Call
Settings sub-menu.
Note: The TTY icon (
) appears in the top of the display.
Voice Privacy
Voice Privacy when enabled (that is, set to Enhanced), turns on
advanced voice encryption.
1.
At the Settings menu, select Call Settings ➔ Voice
Privacy. The following options appear in the display:
• Standard — Voice privacy is disabled.
• Enhanced — Voice privacy is enabled.
2. Use the Navigation key to highlight the Voice Privacy
setting of your choice, then press
OK
to save your setting.
Phone Settings
Airplane Mode
When set to On, Airplane Mode disables all radio functions of
your phone. This prevents you from receiving or making calls
(except emergency calls), but allows you to use other features
(such as the camera and the Tools) safely in sensitive
environments, such as on board an aircraft.
1.
At the Settings menu, select Phone Settings ➔ Airplane
Mode.The following options appear in the display:
• On — Disables the radio transmitter and receiver in your phone.
• Off — Enables the radio transmitter and receiver in your phone.
2. Select the desired option.
• When you select On, the “Will disable all incoming and outgoing
call?” prompt appears in the display.
• When you select Off, the “Will enable all incoming and outgoing
call?” prompt appears in the display.
Changing Your Settings
106
3.
To apply your selection, display/remove the Airplane Mode
icon (
), and return to standby mode, press the Yes
soft key.
To make another selection, press the No soft key.
Language
The language option on your phone can change the language of
voice prompts, menus, and key-input.
1.
At the Settings menu, select Phone Settings ➔
Lock Phone
Locking the phone limits all outgoing calls except calls to 911
emergency and the three user-programmable emergency
numbers. You can lock the phone manually during use, or set the
phone to lock automatically when it is turned on. With the phone
in lock mode, you can answer incoming calls, but you must
unlock the phone to place outgoing calls (except to emergency
and secret numbers).
1.
• English
• Español
2. Use the Navigation key to highlight your language
preference, then press
OK
to implement your preferred
language.
Security
Use the Security menu to lock your phone, set up emergency
numbers, enable or disable voice privacy, set restrictions, as well
as other security options.
At the Settings menu, select Phone Settings ➔ Security.
You’re prompted to enter the lock code.
Language. The following options appear in the display:
Note: The default lock code is the last four digits of your telephone number.
2.
Enter the lock code, then select Lock Phone.
The following Device Lock Mode options appear in the
display:
• Lock — Locks the phone immediately (The phone stays locked
until you enter the lock code.)
• Unlock — Unlocks the phone.
• On Power Up — The phone locks automatically the next time your
phone is powered ON. (The phone stays locked until you enter the
lock code.)
3. Use the Navigation key to highlight the desired Device
Lock Mode, then press
107
OK
to invoke your setting.
Change Lock
The default lock code for your phone is generally the last four
digits of your phone number. It is advisable to change the default
lock code to a secret code for security purposes.
1.
At the Settings menu, select Phone Settings ➔ Security.
when your phone is locked or restricted. This can be a useful
feature for controlling outgoing calls from your phone.
Note: Emergency number 911 is hard-coded into your phone. You can dial
this number any time, even when the phone is locked or restricted. If
you call 911 an audible tone is heard and an Emergency prompt
appears in the display for the duration of the call.
You’re prompted to enter the lock code.
Note: The default lock code is the last four digits of your telephone number.
2.
Enter the lock code, then select Change Lock. You’re
prompted to enter the New Lock Code.
3.
Enter the New Lock Code. You’re prompted to re-enter the
New Lock Code for verification.
4.
Enter the New Lock Code again. Your changes are stored.
Note: Your phone does not allow you to view the lock code for obvious
security reasons. If you change the lock code, be sure to write down or
memorize the new code.
Important!: Because of various transmission methods, network parameters,
and user settings necessary to complete a call from your
wireless phone, a connection cannot always be guaranteed.
Therefore, emergency calling may not be available on all
wireless networks at all times.
Important!: DO NOT depend on this phone as a primary method of calling
911 or for any other essential or emergency communications.
Remember to always turn your phone on and check for adequate
signal strength before placing a call.
Store Emergency Numbers
1.
Emergency #
Your phone provides the option of storing three emergency
numbers. Each number can be up to 32 digits in length. All
emergency numbers can be manually called at any time, even
At the Settings menu, select Phone Settings ➔ Security.
You’re prompted to enter the lock code.
Note: The default lock code is the last four digits of your telephone number.
2.
Enter the lock code, then select Emergency #.
Changing Your Settings
108
Select one of the three emergency number entries.
To keep your current Settings and return to the Security
4.
Enter an emergency number (up to 32 digits in length).
sub-menu, press the No soft key.
5.
Press
3.
OK
to save the number you entered.
Call Emergency Numbers in Lock Mode
1.
In standby mode with the phone locked, enter the
emergency number.
2.
Press
Erase All Entries
Erase All Entries erases your Contacts list entries and My Images
photos. This feature is useful if you want to give your phone to
someone else.
1.
to place the call.
Resetting Your Phone
At the Settings menu, select Phone Settings ➔ Security.
You’re prompted to enter the lock code.
Note: The default lock code is the last four digits of your telephone number.
Reset Phone returns all Settings options to their factory default.
1.
At the Settings menu, select Phone Settings ➔ Security.
2.
Note: The default lock code is the last four digits of your telephone number.
2.
Note: The default lock code is the last four digits of your telephone number.
Enter the lock code, then select Reset Phone. You are
3.
You are prompted to confirm erasure of all entries.
prompted to confirm that you wish to reset your phone’s
4.
Press the Yes soft key to erase all entries or press the No
Settings to default values (except for your Contacts list and
Voice Dial).
3.
To reset your Settings to default values, press the Yes soft
key.
soft key to return to the Security sub-menu.
Restriction
Restriction lets you restrict the use of your phone for outgoing
calls, incoming calls, and access to your Contacts.
1.
109
Enter the lock code, then select Erase All Entries. You are
prompted to enter the lock code a second time.
You’re prompted to enter the lock code.
At the Settings menu, select Phone Settings ➔ Security.
You’re prompted to enter the lock code.
Note: The default lock code is the last four digits of your telephone number.
2.
Enter the lock code, then select Restriction. The following
options appear in the display:
• Outgoing — Blocks/allows all outgoing calls.
• Incoming — Blocks/allows all incoming calls.
• Contacts — Blocks/allows all access to Contacts list entries.
3. Select the desired Restriction. The following options
appear in the display:
• On — Enable the selected Restriction.
• Off — Disable the selected Restriction.
4. Use the Navigation key to highlight On or Off, then press
OK
to save and implement your new setting.
System Select
The System Select menu allows you to select the roaming
setting for your phone.
1.
• Automatic — Your Wireless Provider’s Preferred Roaming List
(PRL) of networks is used to acquire service. If no preferred
networks are found, any digital system is acquired.
2. Select the desired roaming option. You setting is saved,
At the Settings menu, select Phone Settings ➔ System
Select. The following roaming options appear in the
display:
• Home only — Your phone is available for normal operation only
within your designated coverage area.
and you are returned to the Phone Settings menu.
Set Time
Use the Set Time option to set the current date and time while in
an analog network.
Note: In digital service mode, the Set Time feature is disabled. The network
adjusts time and date automatically.
1.
At the Settings menu, select Phone Settings ➔ Set Time.
The following options appear in the display:
• Set Date
• Set Time
2. Select the desired option.
• For Set Date, the Set Date screen appears in the display.
– Enter the current date in mm/dd/yyyy format using your keypad.
The month and day entries require two digits each. The year must be
entered using all four digits.
– Press OK to save your Date setting.
• For Set Time, the Set Time screen appears in the display.
Changing Your Settings
110
– Enter the current time using your keypad.
The hour and minute must be entered using two digits each and in 12/
24-hour format.
– Use the Up/Down navigation keys to highlight the time-of-day setting
(am/pm) field.
– Use the Left/Right navigation keys to select am, pm, or 24 Hours. [You
(for pm).]
can also press
(for am) or
– Press OK to save the your Time setting.
I
2.
3.
At the Settings menu, select Phone Settings ➔ Quick
Search. The following options appear in the display:
• On — Quick Search is enabled
• Off — Quick Search is disabled
2. Use the Navigation key to highlight the desired Quick
OK
key to save your setting.
Searching for a Menu Item
1.
O
X
Press the Down navigation key. The Menu List screen
match your entry.
Quick Search is an easy way to locate Menu items and Contacts.
Search option, then press the
B
appears in the display showing a list of menu items that
Quick Search
1.
N
In standby mode, press the first few numeric keys that
Select the desired menu item to access the content of the
menu item.
Tip: If the menu item you are searching for does not appear in the Menu List
screen, try expanding your search by pressing
to delete the last digit
of your entry.
Searching for a Contact
1.
In standby mode, press the first few numeric keys that
correspond to the letters of the contacts name.
For example, to search for “Sally” you would enter:
correspond to the letters of the Menu item name.
For example, to search for “Inbox” you would enter:
S
111
A
L
L
Y
2.
3.
Press the Up navigation key. The Find screen appears in
From the Settings menu, select Phone Settings ➔
Auto Key Lock. The following settings appear in the
your entry.
display:
Highlight the desired Contact, then press
to call the
highlighted Contact.
PC Connection
PC Connection lets you allow or block PC connections to your
phone, using an optional USB Data Cable.
1.
1.
the display showing a list of Contact names that match
• On
• Off
2. Select the desired option.
To unlock the keys:
1.
From the Settings menu, select Phone Settings ➔
– Or –
PC Connection. The following settings appear in the
display:
• USB Mass Storage — Your phone appears as a removable disk
drive to your PC, allowing you to transfer files (such as, music or
text files) to and from your phone.
• No Connection — Blocks connection and file transfers with a PC.
2. Select the desired setting.
Auto Key Lock
With Auto Key Lock set to On, your phone automatically disables
its keys when the screen backlight goes out with the phone
closed.
Open the QWERTY keypad,
Turn the screen backlight on by pressing any key.
2.
Press the Unlock soft key. “Press * to unlock keys” pops-up
in the display.
3.
Press
.
Memory Info
Memory Info lets you quickly and easily review and manage
your phone memory usage. To access Memory Info, do the
following:
1.
At the Settings menu, select Memory Info.
Changing Your Settings
112
The following options appear in the display:
• Save Options — Lets you specify whether your images and
videos will be stored in your phone or on an optional Memory Card.
• Phone Memory — Lets you review your phone’s available
memory and manage your files stored there.
• Card Memory — Lets you review a removable Memory Card’s
available memory, manage your files stored there, and format new
Memory Cards.
Save Options
Lets you specify where you want your images and videos stored.
To access Save Options, do the following:
1.
At the Settings menu, select Memory Info ➔ Save
Options ➔ Images. The following storage options appear
in the display:
• Phone Memory — saves the selected type of files in your phone’s
memory.
• Card Memory — saves the selected type of files in a removable
microSD memory card.
2. Select the desired storage location. “Save Options set”
appears in the display, and you are returned to the Save
Options menu.
113
Phone Memory
Lets you review your phone’s available memory and manage your
files stored there.
Memory Usage
Memory Usage lets you review your usage of your phone’s
memory.
1.
At the Settings menu, select Memory Info ➔ Phone
Memory ➔ Memory Usage. The Memory Usage screen
appears in the display showing the following information:
• Total Used memory usage
• Available unused memory
• My Images memory usage
• My Ringtones memory usage
• My Sounds memory usage
• Applications memory usage
• PIC Msg memory usage
2. Press OK to return to the Phone Memory menu.
Freeing Memory
Phone Memory sub-menus let you list files in your multimedia
folders and let you erase or move files as needed to free up
memory on your phone for reuse.
1.
At the Settings menu, select Memory Info ➔ Phone
Memory. The Phone Memory screen appears in the
display listing the following options:
• Memory Usage
• My Images
• My Ringtones
• My Sounds
2. Select the desired folder. A list of all files in the related
folder appears in the display.
Files are listed by name, and each file entry shows the
name and size of each file.
3.
To erase files, do the following:
• Press the Erase soft key.
– Or –
Press the Options soft key. The following options appear in the display:
– Erase
– Move
– Copy
• Select Erase.
• Highlight a file you want to erase, then press OK to mark the file for
erasure. (Press the Mark All soft key to mark all files for erasure.)
• Press the Done soft key. You are prompted to confirm erasure of
the selected file(s).
• Press the Yes soft key to erase all marked files or press the No soft
key to return to the Erase screen.
4. To move/copy image files to the Memory Card, do the
following:
• Press the Options soft key. The following options appear in the
display:
– Erase
– Move
– Copy
• Select Move/Copy.
• Highlight a file you want to move, then press OK to mark the file for
moving. (Press the Mark All soft key to mark all files for moving.)
• Press the Done soft key. You are prompted to confirm moving the
selected file(s) to the Memory Card.
• Press the Yes soft key to move all marked files or press the No soft
key to return to the Move screen.
5. Press
to return to the My Images / Ringtones /
Sounds sub-menu. Press
to return to standby mode.
Card Memory
Card Memory lets you review a removable, microSD Memory
Card’s available memory, manage your files stored there, and
format new microSD Memory Cards.
Changing Your Settings
114
Memory Usage
Memory Usage lets you review your usage of your Memory
Card.
1.
At the Settings menu, select Memory Info ➔ Card
Memory ➔ Memory Usage. The Memory Usage screen
• My Music
• My Ringtones
• My Sounds
• Format Card
2. Select the desired folder. A list of all files in the folder
appears in the display.
appears in the display showing the following information:
• Total Used memory usage
• Available unused memory
• My Images memory usage
• My Music memory usage
• My Ringtones memory usage
• My Sounds memory usage
2. Press OK to return to the Card Memory menu.
Freeing Memory
Card Memory sub-menus let you list files in your multimedia
folders and let you erase or move files as needed to free up
space on your Memory Card for reuse.
1.
At the Settings menu, select Memory Info ➔ Card
Memory. The Card Memory screen appears in the display
listing the following options:
• Memory Usage
• My Images
115
Files are listed by name, and each file entry shows the
name and size of each file.
3.
To erase Image files, do the following:
• Press the Options soft key. The following options appear in the
display:
– Erase
– Move
– Copy
• Select Erase.
• Highlight a file you want to erase, then press OK to mark the file for
erasure. (Press the Mark All soft key to mark all files for erasure.)
• Press the Done soft key. You are prompted to confirm erasure of
the selected file(s).
• Press the Yes soft key to erase all marked files or press the No soft
key to return to the Erase screen.
4. To erase Music/Ringtone/Sound files, do the following:
• Press the Erase soft key.
• Highlight a Music/Ringtone/Sound file you want to erase, then press
OK to mark the file for erasure. (Press the Mark All soft key to
mark all Music files for erasure.)
• Press the Done soft key. You are prompted to confirm erasure of
the selected file(s).
• Press the Yes soft key to erase all marked files or press the No soft
key to return to the Erase screen.
5. To move or copy image files to the phone, do the following:
• Press the Options soft key. The following options appear in the
display:
– Erase
– Move
– Copy
• Select Move or Copy.
• Highlight an image file you want to move or copy, then press OK to
mark the file for moving. (Press the Mark All soft key to mark all
files for moving.)
• Press the Done soft key. You are prompted to confirm moving or
copying the selected file(s) to the phone.
• Press the Yes soft key to move or copy all marked files or press the
No soft key to return to the Move or Copy screen.
6. Press
to return to the My Images / Music / Ringtones /
Sounds sub-menu. Press
to return to standby mode.
Formatting a Memory Card
Formatting a microSD Memory Card erases any data currently on
the card and creates multimedia directories compatible with your
phone. To format a Memory Card, do the following:
1.
At the Settings menu, select Memory Info ➔ Card
Memory ➔ Format Card. You are prompted to confirm
formatting of the Memory Card.
2.
Press the Yes soft key to format the Memory Card or press
the No soft key to return to the Card Memory screen.
Phone Info
Phone Info options let you identify important information about
your phone, such as the hardware and software versions of your
phone, the meanings of your phones status icons, and the phone
number assigned to your phone.
Phone Number
This option causes the Phone Number screen to appear in the
display and show the ten-digit number assigned to your phone by
your Wireless Provider.
1.
At the Settings menu, select Phone Info ➔ Phone
Number. The phone number assigned by your Wireless
Provider appears in the display.
Changing Your Settings
116
2.
Press
OK
to return to the Phone Info menu.
Icon Glossary
This option causes the ICON GLOSSARY list to appear in the
display and show the icons that can appear in the display and the
names of the icons.
1.
of the display shows in the display.
Press
OK
to return to the Phone Info menu.
Version
You can view both the software and hardware version of your
phone using this feature. This feature is helpful if you need to
contact Customer Service.
1.
At the Settings menu, select Phone Info ➔ Version.
Your phone’s hardware and software version information
appears in the display.
2.
You can view the ESN (Electronic Serial Number)/MEID (Mobile
Equipment Identifier) values for your phone in both Decimal and
Hex values from this menu.
1.
At the Settings menu, select Phone Info ➔ Icon
Glossary. A list of the icons that can appear on the top line
2.
ESN / MEID
Press
OK
to return to the Phone Info menu.
At the Settings menu, select Phone Info ➔ ESN/MEID.
The ESN/MEID information displays in Dec and Hex.
2.
Press
OK
to return to the Phone Info menu.
Warranty Date Code
Your phone provides a customer warranty date code. The code
(date MM/DD/YYYY and time HH:MM) is populated into the phone
after 10 minutes of CDMA usage time. This Date Code value may
be used to determine the device warranty status.
You can view the Warranty data code for your phone.
䊳
At the Settings menu, select Phone Info ➔ Warranty Date
Code.
The Warranty Date Code information appears in the
display.
Refurbish
If your phone has been refurbished by the manufacturer, your
phone records the date and time it was last refurbished and the
number of times it has been refurbished.
117
䊳
At the Settings menu, select Phone Info ➔ Refurbish. The
following information appears in the display:
• Date and Time your phone was last refurbished.
• Refurbish counter — Shows number of times your phone has
been refurbished.
Changing Your Settings
118
Section 15: Health and Safety Information
This section outlines the safety precautions associated with using
your phone. These safety precautions should be followed to safely
use your phone.
Health and Safety Information
Exposure to Radio Frequency (RF) Signals
Certification Information (SAR)
Your wireless phone is a radio transmitter and receiver. It is
designed and manufactured not to exceed the exposure limits for
radio frequency (RF) energy set by the Federal Communications
Commission (FCC) of the U.S. government.
These FCC exposure limits are derived from the
recommendations of two expert organizations, the National
Counsel on Radiation Protection and Measurement (NCRP) and
the Institute of Electrical and Electronics Engineers (IEEE).
In both cases, the recommendations were developed by scientific
and engineering experts drawn from industry, government, and
academia after extensive reviews of the scientific literature
related to the biological effects of RF energy.
The exposure limit set by the FCC for wireless mobile phones
employs a unit of measurement known as the Specific
Absorption Rate (SAR). The SAR is a measure of the rate of
119
absorption of RF energy by the human body expressed in units of
watts per kilogram (W/kg). The FCC requires wireless phones to
comply with a safety limit of 1.6 watts per kilogram (1.6 W/kg).
The FCC exposure limit incorporates a substantial margin of
safety to give additional protection to the public and to account
for any variations in measurements.
SAR tests are conducted using standard operating positions
accepted by the FCC with the phone transmitting at its highest
certified power level in all tested frequency bands. Although the
SAR is determined at the highest certified power level, the actual
SAR level of the phone while operating can be well below the
maximum value. This is because the phone is designed to
operate at multiple power levels so as to use only the power
required to reach the network. In general, the closer you are to a
wireless base station antenna, the lower the power output.
Before a new model phone is available for sale to the public, it
must be tested and certified to the FCC that it does not exceed
the exposure limit established by the FCC. Tests for each model
phone are performed in positions and locations (e.g. at the ear
and worn on the body) as required by the FCC.
For body worn operation, this phone has been tested and meets
FCC RF exposure guidelines when used with an accessory that
contains no metal and that positions the handset a minimum of
1.5 cm from the body.
Use of other accessories may not ensure compliance with FCC RF
exposure guidelines.
The FCC has granted an Equipment Authorization for this mobile
phone with all reported SAR levels evaluated as in compliance
with the FCC RF exposure guidelines. The maximum SAR values
for this model phone as reported to the FCC are:
• Head: 1.42 W/Kg.
• Body-worn: 0.998 W/Kg.
SAR information on this and other model phones can be viewed
online at http://www.fcc.gov/oet/ea. To find information that
pertains to a particular model phone, this site uses the phone
FCC ID number which is usually printed somewhere on the case
of the phone.
Sometimes it may be necessary to remove the battery pack to
find the number. Once you have the FCC ID number for a
particular phone, follow the instructions on the website and it
should provide values for typical or maximum SAR for a particular
phone. Additional product specific SAR information can also be
obtained at www.fcc.gov/cgb/sar.
Samsung Mobile Products and Recycling
Samsung cares for the environment and encourages its
customers to recycle Samsung mobile phones and genuine
Samsung accessories.
Go to: http://www.samsung.com/us/consumer/type/
type.do?group=mobilephones&type=mobilephones for more
information.
UL Certified Travel Adapter
The Travel Adapter for this phone has met applicable UL safety
requirements. Please adhere to the following safety instructions
per UL guidelines.
FAILURE TO FOLLOW THE INSTRUCTIONS OUTLINED MAY LEAD
TO SERIOUS PERSONAL INJURY AND POSSIBLE PROPERTY
DAMAGE.
IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE
INSTRUCTIONS.
DANGER - TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
CAREFULLY FOLLOW THESE INSTRUCTIONS.
FOR CONNECTION TO A SUPPLY NOT IN NORTH AMERICA, USE
AN ATTACHMENT PLUG ADAPTOR OF THE PROPER
CONFIGURATION FOR THE POWER OUTLET. THIS POWER UNIT IS
INTENDED TO BE CORRECTLY ORIENTATED IN A VERTICAL OR
HORIZONTAL OR FLOOR MOUNT POSITION.
Health and Safety Information
120
Consumer Information on Wireless Phones
The U.S. Food and Drug Administration (FDA) has published a
series of Questions and Answers for consumers relating to radio
frequency (RF) exposure from wireless phones. The FDA
publication includes the following information:
What kinds of phones are the subject of this update?
The term wireless phone refers here to hand-held wireless
phones with built-in antennas, often called "cell," "mobile," or
"PCS" phones. These types of wireless phones can expose the
user to measurable radio frequency energy (RF) because of the
short distance between the phone and the user's head. These RF
exposures are limited by Federal Communications Commission
safety guidelines that were developed with the advice of FDA and
other federal health and safety agencies.
When the phone is located at greater distances from the user, the
exposure to RF is drastically lower because a person's RF
exposure decreases rapidly with increasing distance from the
source. The so-called "cordless phones," which have a base unit
connected to the telephone wiring in a house, typically operate at
far lower power levels, and thus produce RF exposures well
within the FCC's compliance limits.
121
Do wireless phones pose a health hazard?
The available scientific evidence does not show that any health
problems are associated with using wireless phones. There is no
proof, however, that wireless phones are absolutely safe.
Wireless phones emit low levels of radio frequency energy (RF) in
the microwave range while being used. They also emit very low
levels of RF when in the stand-by mode. Whereas high levels of
RF can produce health effects (by heating tissue), exposure to
low level RF that does not produce heating effects causes no
known adverse health effects. Many studies of low level RF
exposures have not found any biological effects. Some studies
have suggested that some biological effects may occur, but such
findings have not been confirmed by additional research. In some
cases, other researchers have had difficulty in reproducing those
studies, or in determining the reasons for inconsistent results.
What is FDA's role concerning the safety of wireless
phones?
Under the law, FDA does not review the safety of radiationemitting consumer products such as wireless phones before they
can be sold, as it does with new drugs or medical devices.
However, the agency has authority to take action if wireless
phones are shown to emit radio frequency energy (RF) at a level
that is hazardous to the user. In such a case, FDA could require
the manufacturers of wireless phones to notify users of the
health hazard and to repair, replace or recall the phones so that
the hazard no longer exists.
Although the existing scientific data do not justify FDA regulatory
actions, FDA has urged the wireless phone industry to take a
number of steps, including the following:
• Support needed research into possible biological effects of RF of the
type emitted by wireless phones;
• Design wireless phones in a way that minimizes any RF exposure to
the user that is not necessary for device function; and
• Cooperate in providing users of wireless phones with the best possible
information on possible effects of wireless phone use on human
health.
FDA belongs to an interagency working group of the federal
agencies that have responsibility for different aspects of RF
safety to ensure coordinated efforts at the federal level. The
following agencies belong to this working group:
• National Institute for Occupational Safety and Health
• Environmental Protection Agency
• Federal Communications Commission
• Occupational Safety and Health Administration
• National Telecommunications and Information Administration
The National Institutes of Health participates in some interagency
working group activities, as well.
FDA shares regulatory responsibilities for wireless phones with
the Federal Communications Commission (FCC). All phones that
are sold in the United States must comply with FCC safety
guidelines that limit RF exposure. FCC relies on FDA and other
health agencies for safety questions about wireless phones.
FCC also regulates the base stations that the wireless phone
networks rely upon. While these base stations operate at higher
power than do the wireless phones themselves, the RF
exposures that people get from these base stations are typically
thousands of times lower than those they can get from wireless
phones.
Base stations are thus not the primary subject of the safety
questions discussed in this document.
What are the results of the research done already?
The research done thus far has produced conflicting results, and
many studies have suffered from flaws in their research
methods. Animal experiments investigating the effects of radio
frequency energy (RF) exposures characteristic of wireless
phones have yielded conflicting results that often cannot be
repeated in other laboratories. A few animal studies, however,
have suggested that low levels of RF could accelerate the
development of cancer in laboratory animals. However, many of
the studies that showed increased tumor development used
animals that had been genetically engineered or treated with
Health and Safety Information
122
cancer-causing chemicals so as to be pre-disposed to develop
cancer in absence of RF exposure. Other studies exposed the
animals to RF for up to 22 hours per day. These conditions are
not similar to the conditions under which people use wireless
phones, so we don't know with certainty what the results of such
studies mean for human health.
Three large epidemiology studies have been published since
December 2000. Between them, the studies investigated any
possible association between the use of wireless phones and
primary brain cancer, glioma, meningioma, or acoustic neuroma,
tumors of the brain or salivary gland, leukemia, or other cancers.
None of the studies demonstrated the existence of any harmful
health effects from wireless phones RF exposures.
However, none of the studies can answer questions about longterm exposures, since the average period of phone use in these
studies was around three years.
What research is needed to decide whether RF exposure
from wireless phones poses a health risk?
A combination of laboratory studies and epidemiological studies
of people actually using wireless phones would provide some of
the data that are needed. Lifetime animal exposure studies could
be completed in a few years. However, very large numbers of
animals would be needed to provide reliable proof of a cancer
promoting effect if one exists. Epidemiological studies can
123
provide data that is directly applicable to human populations, but
ten or more years' follow-up may be needed to provide answers
about some health effects, such as cancer.
This is because the interval between the time of exposure to a
cancer-causing agent and the time tumors develop - if they do may be many, many years. The interpretation of epidemiological
studies is hampered by difficulties in measuring actual RF
exposure during day-to-day use of wireless phones. Many
factors affect this measurement, such as the angle at which the
phone is held, or which model of phone is used.
What is FDA doing to find out more about the possible
health effects of wireless phone RF?
FDA is working with the U.S. National Toxicology Program and
with groups of investigators around the world to ensure that high
priority animal studies are conducted to address important
questions about the effects of exposure to radio frequency
energy (RF).
FDA has been a leading participant in the World Health
Organization international Electromagnetic Fields (EMF) Project
since its inception in 1996. An influential result of this work has
been the development of a detailed agenda of research needs
that has driven the establishment of new research programs
around the world. The Project has also helped develop a series of
public information documents on EMF issues.
FDA and Cellular Telecommunications & Internet Association
(CTIA) have a formal Cooperative Research and Development
Agreement (CRADA) to do research on wireless phone safety.
FDA provides the scientific oversight, obtaining input from
experts in government, industry, and academic organizations.
CTIA-funded research is conducted through contracts to
independent investigators. The initial research will include both
laboratory studies and studies of wireless phone users. The
CRADA will also include a broad assessment of additional
research needs in the context of the latest research
developments around the world.
What steps can I take to reduce my exposure to radio
frequency energy from my wireless phone?
If there is a risk from these products - and at this point we do not
know that there is - it is probably very small. But if you are
concerned about avoiding even potential risks, you can take a
few simple steps to minimize your exposure to radio frequency
energy (RF). Since time is a key factor in how much exposure a
person receives, reducing the amount of time spent using a
wireless phone will reduce RF exposure.
• If you must conduct extended conversations by wireless phone every
day, you could place more distance between your body and the source
of the RF, since the exposure level drops off dramatically with distance.
For example, you could use a headset and carry the wireless phone
away from your body or use a wireless phone connected to a remote
antenna.
Again, the scientific data do not demonstrate that wireless
phones are harmful. But if you are concerned about the RF
exposure from these products, you can use measures like those
described above to reduce your RF exposure from wireless phone
use.
What about children using wireless phones?
The scientific evidence does not show a danger to users of
wireless phones, including children and teenagers. If you want to
take steps to lower exposure to radio frequency energy (RF), the
measures described above would apply to children and
teenagers using wireless phones. Reducing the time of wireless
phone use and increasing the distance between the user and the
RF source will reduce RF exposure.
Some groups sponsored by other national governments have
advised that children be discouraged from using wireless phones
at all. For example, the government in the United Kingdom
distributed leaflets containing such a recommendation in
December 2000.
They noted that no evidence exists that using a wireless phone
causes brain tumors or other ill effects. Their recommendation to
limit wireless phone use by children was strictly precautionary; it
Health and Safety Information
124
was not based on scientific evidence that any health hazard
exists.
Do hands-free kits for wireless phones reduce
risks from exposure to RF emissions?
Since there are no known risks from exposure to RF emissions
from wireless phones, there is no reason to believe that handsfree kits reduce risks. Hands-free kits can be used with wireless
phones for convenience and comfort. These systems reduce the
absorption of RF energy in the head because the phone, which is
the source of the RF emissions, will not be placed against the
head. On the other hand, if the phone is mounted against the
waist or other part of the body during use, then that part of the
body will absorb more RF energy. Wireless phones marketed in
the U.S. are required to meet safety requirements regardless of
whether they are used against the head or against the body.
Either configuration should result in compliance with the safety
limit.
Do wireless phone accessories that claim to shield
the head from RF radiation work?
Since there are no known risks from exposure to RF emissions
from wireless phones, there is no reason to believe that
accessories that claim to shield the head from those emissions
reduce risks. Some products that claim to shield the user from RF
absorption use special phone cases, while others involve nothing
125
more than a metallic accessory attached to the phone. Studies
have shown that these products generally do not work as
advertised. Unlike "hand-free" kits, these so-called "shields"
may interfere with proper operation of the phone. The phone may
be forced to boost its power to compensate, leading to an
increase in RF absorption. In February 2002, the Federal trade
Commission (FTC) charged two companies that sold devices that
claimed to protect wireless phone users from radiation with
making false and unsubstantiated claims.
According to FTC, these defendants lacked a reasonable basis to
substantiate their claim.
What about wireless phone interference with
medical equipment?
Radio frequency energy (RF) from wireless phones can interact
with some electronic devices. For this reason, FDA helped
develop a detailed test method to measure electromagnetic
interference (EMI) of implanted cardiac pacemakers and
defibrillators from wireless telephones. This test method is now
part of a standard sponsored by the Association for the
Advancement of Medical instrumentation (AAMI). The final draft,
a joint effort by FDA, medical device manufacturers, and many
other groups, was completed in late 2000. This standard will
allow manufacturers to ensure that cardiac pacemakers and
defibrillators are safe from wireless phone EMI. FDA has tested
wireless phones and helped develop a voluntary standard
sponsored by the Institute of Electrical and Electronic Engineers
(IEEE). This standard specifies test methods and performance
requirements for hearing aids and wireless phones so that no
interference occurs when a person uses a compatible phone and
a compatible hearing aid at the same time. This standard was
approved by the IEEE in 2000.
FDA continues to monitor the use of wireless phones for possible
interactions with other medical devices. Should harmful
interference be found to occur, FDA will conduct testing to assess
the interference and work to resolve the problem.
Additional information on the safety of RF exposures from various
sources can be obtained from the following organizations
(Updated 12/1/2006):
• FCC RF Safety Program:
http://www.fcc.gov/oet/rfsafety/
• Environmental Protection Agency (EPA):
http://www.epa.gov/radiation/
• Occupational Safety and Health Administration's (OSHA):
http://www.osha.gov/SLTC/radiofrequencyradiation/index.html
• National Institute for Occupational Safety and Health (NIOSH):
http://www.cdc.gov/niosh/homepage.html
• World Health Organization (WHO):
http://www.who.int/peh-emf/
• International Commission on Non-Ionizing Radiation Protection:
http://www.icnirp.de
• National Radiation Protection Board (UK):
http://www.hpa.org.uk/radiation
• US Food and Drug Administration:
http://www.fda.gov/cellphones
Road Safety
Your wireless phone gives you the powerful ability to
communicate by voice, almost anywhere, anytime. But an
important responsibility accompanies the benefits of wireless
phones, one that every user must uphold.
When driving a car, driving is your first responsibility. When using
your wireless phone behind the wheel of a car, practice good
common sense and remember the following tips:
1.
Get to know your wireless phone and its features, such as
speed dial and redial. If available, these features help you
to place your call without taking your attention off the road.
2.
When available, use a hands-free device. If possible, add
an additional layer of convenience and safety to your
wireless phone with one of the many hands free
accessories available today.
Health and Safety Information
126
3.
Position your wireless phone within easy reach. Be able to
7.
may be distracting. Make people you are talking with
from the road. If you get an incoming call at an
aware you are driving and suspend conversations that
inconvenient time, let your voice mail answer it for you.
4.
Let the person you are speaking with know you are driving;
have the potential to divert your attention from the road.
8.
if necessary, suspend the call in heavy traffic or hazardous
traffic can be hazardous.
or medical emergencies.
9.
Use your wireless phone to help others in emergencies. If
Do not take notes or look up phone numbers while driving.
you see an auto accident, crime in progress or other
Jotting down a "to do" list or flipping through your address
serious emergency where lives are in danger, call 9-1-1 or
book takes attention away from your primary
other local emergency number, as you would want others
responsibility, driving safely.
6.
Use your wireless phone to call for help. Dial 9-1-1 or other
local emergency number in the case of fire, traffic accident
weather conditions. Rain, sleet, snow, ice and even heavy
5.
Do not engage in stressful or emotional conversations that
access your wireless phone without removing your eyes
Dial sensibly and assess the traffic; if possible, place calls
to do for you.
10. Call roadside assistance or a special non-emergency
when you are not moving or before pulling into traffic. Try
wireless assistance number when necessary. If you see a
to plan calls when your car will be stationary. If you need to
broken-down vehicle posing no serious hazard, a broken
make a call while moving, dial only a few numbers, check
traffic signal, a minor traffic accident where no one
the road and your mirrors, then continue.
appears injured, or a vehicle you know to be stolen, call
roadside assistance or other special non-emergency
number.
127
"The wireless industry reminds you to use your phone safely when
driving."
For more information, please call 1-888-901-SAFE, or visit our
web-site www.ctia.org.
Important!: If you are using a handset other than a standard numeric keypad,
please call 1-888-901-7233.
Provided by the Cellular Telecommunications & Internet
Association.
Responsible Listening
Caution!: Avoid potential hearing loss.
Damage to hearing occurs when a person is exposed to loud
sounds over time. The risk of hearing loss increases as sound is
played louder and for longer durations. Prolonged exposure to
loud sounds (including music) is the most common cause of
preventable hearing loss. Some scientific research suggests that
using portable audio devices, such as portable music players and
cellular telephones, at high volume settings for long durations
may lead to permanent noise-induced hearing loss. This includes
the use of headphones (including headsets, earbuds, and
Bluetooth or other wireless devices). Exposure to very loud sound
has also been associated in some studies with tinnitus (a ringing
in the ear), hypersensitivity to sound and distorted hearing.
Individual susceptibility to noise-induced hearing loss and
potential hearing problem varies. Additionally, the amount of
sound produced by a portable audio device varies depending on
the nature of the sound, the device settings, and the headphones
that are used. As a result, there is no single volume setting that is
appropriate for everyone or for every combination of sound,
settings and equipment.
You should follow some commonsense recommendations when
using any portable audio device:
• Set the volume in a quiet environment and select the lowest volume at
which you can hear adequately.
• When using headphones, turn the volume down if you cannot hear the
people speaking near you or if the person sitting next to you can hear
what you are listening to.
• Do not turn the volume up to block out noisy surroundings. If you
choose to listen to your portable device in a noisy environment, you
noise-cancelling headphones to block out background environmental
noise. By blocking background environment noise, noise cancelling
headphones should allow you to hear the music at lower volumes than
when using earbuds.
• Limit the amount of time you listen. As the volume increases, less time
is required before you hearing could be affected.
Health and Safety Information
128
• Avoid using headphones after exposure to extremely loud noises, such
as rock concerts, that might cause temporary hearing loss. Temporary
hearing loss might cause unsafe volumes to sound normal.
• Do not listen at any volume that causes you discomfort. If you
experience ringing in your ears, hear muffled speech or experience
any temporary hearing difficulty after listening to your portable audio
device, discontinue use and consult your doctor.
You can obtain additional information on this subject from the
following sources:
National Institute on Deafness and Other Communication Disorders
National Institutes of Health
31 Center Drive, MSC 2320
Bethesda, MD 20892-2320
Voice: (301) 496-7243
Email: nidcdinfo@nih.gov
Internet: http://www.cdc.gov/niosh/topics/noise/default.html
National Institute for Occupational Safety and Health
American Academy of Audiology
11730 Plaza American Drive, Suite 300
Reston, VA 20190
Voice: (800) 222-2336
Email: info@audiology.org
Internet: http://www.audiology.org
Hubert H. Humphrey Bldg.
200 Independence Ave., SW
Washington, DC 20201
Voice: 1-800-35-NIOSH (1-800-356-4647)
Internet: http://www.cdc.gov/niosh/topics/noise/default.html
Operating Environment
Remember to follow any special regulations in force in any area
and always switch your phone off whenever it is forbidden to use
it, or when it may cause interference or danger.
When connecting the phone or any accessory to another device,
read its user's guide for detailed safety instructions. Do not
connect incompatible products.
129
As with other mobile radio transmitting equipment, users are
advised that for the satisfactory operation of the equipment and
for the safety of personnel, it is recommended that the
equipment should only be used in the normal operating position
(held to your ear with the antenna pointing over your shoulder if
you are using an external antenna).
Using Your Phone Near Other Electronic Devices
Most modern electronic equipment is shielded from radio
frequency (RF) signals. However, certain electronic equipment
may not be shielded against the RF signals from your wireless
phone. Consult the manufacturer to discuss alternatives.
Implantable Medical Devices
A minimum separation of six (6) inches should be maintained
between a handheld wireless phone and an implantable medical
device, such as a pacemaker or implantable cardioverter
defibrillator, to avoid potential interference with the device.
Persons who have such devices:
• Should ALWAYS keep the phone more than six (6) inches from their
implantable medical device when the phone is turned ON;
• Should not carry the phone in a breast pocket;
• Should use the ear opposite the implantable medical device to
minimize the potential for interference;
• Should turn the phone OFF immediately if there is any reason to
suspect that interference is taking place;
• Should read and follow the directions from the manufacturer of your
implantable medical device. If you have any questions about using
your wireless phone with such a device, consult your health care
provider.
For more information see:
http://www.fcc.gov/oet/rfsafety/rf-faqs.html
FCC Hearing-Aid Compatibility (HAC)
Regulations for Wireless Devices
On July 10, 2003, the U.S. Federal Communications Commission
(FCC) Report and Order in WT Docket 01-309 modified the
exception of wireless phones under the Hearing Aid Compatibility
Act of 1988 (HAC Act) to require digital wireless phones be
compatible with hearing-aids.
The intent of the HAC Act is to ensure reasonable access to
telecommunications services for persons with hearing
disabilities.
While some wireless phones are used near some hearing devices
(hearing aids and cochlear implants), users may detect a
buzzing, humming, or whining noise. Some hearing devices are
more immune than others to this interference noise, and phones
also vary in the amount of interference they generate.
Health and Safety Information
130
The wireless telephone industry has developed a rating system
for wireless phones, to assist hearing device users find phones
that may be compatible with their hearing devices. Not all phones
have been rated. Phones that are rated have the rating on their
box or a label located on the box.
The ratings are not guarantees. Results will vary depending on
the user's hearing device and hearing loss. If your hearing device
happens to be vulnerable to interference, you may not be able to
use a rated phone successfully. Trying out the phone with your
hearing device is the best way to evaluate it for your personal
needs.
M-Ratings: Phones rated M3 or M4 meet FCC requirements and
are likely to generate less interference to hearing devices than
phones that are not labeled. M4 is the better/higher of the two
ratings.
T-Ratings: Phones rated T3 or T4 meet FCC requirements and are
likely to generate less interference to hearing devices than
phones that are not labeled. T4 is the better/higher of the two
ratings.
Hearing devices may also be rated. Your hearing device
manufacturer or hearing health professional may help you find
this rating. Higher ratings mean that the hearing device is
relatively immune to interference noise. The hearing aid and
wireless phone rating values are then added together. A sum of 5
131
is considered acceptable for normal use. A sum of 6 is
considered for best use.
M3
+
M2
=
5
T3
+
T2
=
5
In the above example, if a hearing aid meets the M2 level rating
and the wireless phone meets the M3 level rating, the sum of the
two values equal M5. This is synonymous for T ratings. This
should provide the hearing aid user with "normal usage" while
using their hearing aid with the particular wireless phone.
"Normal usage" in this context is defined as a signal quality that
is acceptable for normal operation.
The M mark is intended to be synonymous with the U mark. The
T mark is intended to be synonymous with the UT mark. The M
and T marks are recommended by the Alliance for
Telecommunications Industries Solutions (ATIS). The U and UT
marks are referenced in Section 20.19 of the FCC Rules.
The HAC rating and measurement procedure are described in the
American National Standards Institute (ANSI) C63.19 standard.
Other Medical Devices
If you use any other personal medical devices, consult the
manufacturer of your device to determine if it is adequately
shielded from external RF energy. Your physician may be able to
assist you in obtaining this information. Switch your phone off in
health care facilities when any regulations posted in these areas
instruct you to do so. Hospitals or health care facilities may be
using equipment that could be sensitive to external RF energy.
Vehicles
RF signals may affect improperly installed or inadequately
shielded electronic systems in motor vehicles. Check with the
manufacturer or its representative regarding your vehicle. You
should also consult the manufacturer of any equipment that has
been added to your vehicle.
Posted Facilities
Switch your phone off in any facility where posted notices require
you to do so.
Potentially Explosive Environments
Switch your phone off when in any area with a potentially
explosive atmosphere and obey all signs and instructions. Sparks
in such areas could cause an explosion or fire resulting in bodily
injury or even death.
Users are advised to switch the phone off while at a refueling
point (service station). Users are reminded of the need to observe
restrictions on the use of radio equipment in fuel depots (fuel
storage and distribution areas), chemical plants or where blasting
operations are in progress.
Areas with a potentially explosive atmosphere are often but not
always clearly marked. They include below deck on boats,
chemical transfer or storage facilities, vehicles using liquefied
petroleum gas (such as propane or butane), areas where the air
contains chemicals or particles, such as grain, dust or metal
powders, and any other area where you would normally be
advised to turn off your vehicle engine.
Emergency Calls
This phone, like any wireless phone, operates using radio
signals, wireless and landline networks as well as userprogrammed functions, which cannot guarantee connection in all
conditions. Therefore, you should never rely solely on any
wireless phone for essential communications (medical
emergencies, for example).
Health and Safety Information
132
Remember, to make or receive any calls the phone must be
switched on and in a service area with adequate signal strength.
Emergency calls may not be possible on all wireless phone
networks or when certain network services and/or phone
features are in use. Check with local service providers.
Restricting Children's access to your Phone
To make an emergency call:
FCC Notice
1.
If the phone is not on, switch it on.
2.
Key in the emergency number for your present location (for
example, 911 or other official emergency number).
Emergency numbers vary by location.
3.
Press the
key.
If certain features are in use (call barring, for example), you may
first need to deactivate those features before you can make an
emergency call. Consult this document and your local cellular
service provider.
When making an emergency call, remember to give all the
necessary information as accurately as possible. Remember that
your phone may be the only means of communication at the
scene of an accident; do not cut off the call until given
permission to do so.
133
Your phone is not a toy. Children should not be allowed to play
with it because they could hurt themselves and others, damage
the phone or make calls that increase your phone bill.
FCC Notice and Cautions
The phone may cause TV or radio interference if used in close
proximity to receiving equipment. The FCC can require you to
stop using the phone if such interference cannot be eliminated.
Vehicles using liquefied petroleum gas (such as propane or
butane) must comply with the National Fire Protection Standard
(NFPA-58). For a copy of this standard, contact the National Fire
Protection Association, One Batterymarch Park, Quincy, MA
02269, Attn: Publication Sales Division.
Cautions
Any changes or modifications to your phone not expressly
approved in this document could void your warranty for this
equipment, and void your authority to operate this equipment.
Only use approved batteries, antennas and chargers. The use of
any unauthorized accessories may be dangerous and void the
phone warranty if said accessories cause damage or a defect to
the phone.
Although your phone is quite sturdy, it is a complex piece of
equipment and can be broken. Avoid dropping, hitting, bending
or sitting on it.
Other Important Safety Information
• Only qualified personnel should service the phone or install the phone
in a vehicle. Faulty installation or service may be dangerous and may
invalidate any warranty applicable to the device.
• Check regularly that all wireless phone equipment in your vehicle is
mounted and operating properly.
• Do not store or carry flammable liquids, gases or explosive materials in
the same compartment as the phone, its parts or accessories.
• For vehicles equipped with an air bag, remember that an air bag
inflates with great force. Do not place objects, including both installed
or portable wireless equipment in the area over the air bag or in the air
bag deployment area. If wireless equipment is improperly installed and
the air bag inflates, serious injury could result.
• Switch your phone off before boarding an aircraft. The use of wireless
phone in aircraft is illegal and may be dangerous to the aircraft's
operation.
• Failure to observe these instructions may lead to the suspension or
denial of telephone services to the offender, or legal action, or both.
Product Performance
Getting the Most Out of Your Signal Reception
The quality of each call you make or receive depends on the
signal strength in your area. Your phone informs you of the
current signal strength by displaying a number of bars next to the
signal strength icon. The more bars displayed, the stronger the
signal.
If you're inside a building, being near a window may give you
better reception.
Understanding the Power Save Feature
If your phone is unable to find a signal after searching, a Power
Save feature is automatically activated. If your phone is active, it
periodically rechecks service availability or you can check it
yourself by pressing any key.
Anytime the Power Save feature is activated, a message displays
on the screen. When a signal is found, your phone returns to
standby mode.
Understanding How Your Phone Operates
Your phone is basically a radio transmitter and receiver. When it's
turned on, it receives and transmits radio frequency (RF) signals.
When you use your phone, the system handling your call controls
the power level. This power can range from 0.006 watts to 0.2
watts in digital mode.
Health and Safety Information
134
Maintaining Your Phone's Peak Performance
For the best care of your phone, only authorized personnel should
service your phone and accessories. Faulty service may void the
warranty.
There are several simple guidelines to operating your phone
properly and maintaining safe, satisfactory service.
• To ensure that the Hearing Aid Compatibility rating for your phone is
maintained, secondary transmitters such as Bluetooth and WLAN
components must be disabled during a call. For more information,
refer to “Bluetooth” on page 84.
• If your phone is equipped with an external antenna, hold the phone
with the antenna raised, fully-extended and over your shoulder.
• Do not hold, bend or twist the phone's antenna, if applicable.
• Do not use the phone if the antenna is damaged.
• If your phone is equipped with an internal antenna, obstructing the
internal antenna could inhibit call performance.
• Speak directly into the phone's receiver.
• Avoid exposing your phone and accessories to rain or liquid spills. If
your phone does get wet, immediately turn the power off and remove
the battery. If it is inoperable, call Customer Care for service.
Availability of Various Features/Ring Tones
Many services and features are network dependent and may
require additional subscription and/or usage charges. Not all
135
features are available for purchase or use in all areas.
Downloadable Ring Tones may be available at an additional cost.
Other conditions and restrictions may apply. See your service
provider for additional information.
Battery Standby and Talk Time
Standby and talk times will vary depending on phone usage
patterns and conditions. Battery power consumption depends on
factors such as network configuration, signal strength, operating
temperature, features selected, frequency of calls, and voice,
data, and other application usage patterns.
Battery Precautions
• Avoid dropping the cell phone. Dropping it, especially on a hard
surface, can potentially cause damage to the phone and battery. If you
suspect damage to the phone or battery, take it to a service center for
inspection.
• Never use any charger or battery that is damaged in any way.
• Do not modify or remanufacture the battery as this could result in
serious safety hazards.
• If you use the phone near the network's base station, it uses less
power; talk and standby time are greatly affected by the signal
strength on the cellular network and the parameters set by the
network operator.
• Follow battery usage, storage and charging guidelines found in the
user’s guide.
• Battery charging time depends on the remaining battery charge and
the type of battery and charger used. The battery can be charged and
discharged hundreds of times, but it will gradually wear out. When the
operation time (talk time and standby time) is noticeably shorter than
normal, it is time to buy a new battery.
• If left unused, a fully charged battery will discharge itself over time.
• Use only Samsung-approved batteries and recharge your battery only
with Samsung-approved chargers. When a charger is not in use,
disconnect it from the power source. Do not leave the battery
connected to a charger for more than a week, since overcharging may
shorten its life.
• Do not use incompatible cell phone batteries and chargers. Some Web
sites and second-hand dealers, not associated with reputable
manufacturers and carriers, might be selling incompatible or even
counterfeit batteries and chargers. Consumers should purchase
manufacturer or carrier recommended products and accessories. If
unsure about whether a replacement battery or charger is compatible,
contact the manufacturer of the battery or charger.
• Misuse or use of incompatible phones, batteries, and charging devices
could result in damage to the equipment and a possible risk of fire,
explosion, leakage, or other serious hazard.
• Extreme temperatures will affect the charging capacity of your battery:
it may require cooling or warming first.
• Do not leave the battery in hot or cold places, such as in a car in
summer or winter conditions, as you will reduce the capacity and
lifetime of the battery. Always try to keep the battery at room
temperature. A phone with a hot or cold battery may temporarily not
work, even when the battery is fully charged. Li-ion batteries are
particularly affected by temperatures below
0 °C (32 °F).
• Do not place the phone in areas that may get very hot, such as on or
near a cooking surface, cooking appliance, iron, or radiator.
• Do not get your phone or battery wet. Even though they will dry and
appear to operate normally, the circuitry could slowly corrode and
pose a safety hazard.
• Do not short-circuit the battery. Accidental short-circuiting can occur
when a metallic object (coin, clip or pen) causes a direct connection
between the + and - terminals of the battery (metal strips on the
battery), for example when you carry a spare battery in a pocket or
bag. Short-circuiting the terminals may damage the battery or the
object causing the short-circuiting.
• Do not permit a battery out of the phone to come in contact with metal
objects, such as coins, keys or jewelry.
• Do not crush, puncture or put a high degree of pressure on the battery
as this can cause an internal short-circuit, resulting in overheating.
• Dispose of used batteries in accordance with local regulations. In some
areas, the disposal of batteries in household or business trash may be
prohibited. For safe disposal options for Li-Ion batteries, contact your
nearest Samsung authorized service center. Always recycle. Do not
dispose of batteries in a fire.
Health and Safety Information
136
Care and Maintenance
Your phone is a product of superior design and craftsmanship
and should be treated with care. The suggestions below will help
you fulfill any warranty obligations and allow you to enjoy this
product for many years.
• Keep the phone and all its parts and accessories out of the reach of
small children.
• Keep the phone dry. Precipitation, humidity and liquids contain
minerals that will corrode electronic circuits.
• Do not use the phone with a wet hand. Doing so may cause an electric
shock to you or damage to the phone.
• Do not use or store the phone in dusty, dirty areas, as its moving parts
may be damaged.
• Do not store the phone in hot areas. High temperatures can shorten the
life of electronic devices, damage batteries, and warp or melt certain
plastics.
• Do not store the phone in cold areas. When the phone warms up to its
normal operating temperature, moisture can form inside the phone,
which may damage the phone's electronic circuit boards.
• Do not drop, knock or shake the phone. Rough handling can break
internal circuit boards.
• Do not use harsh chemicals, cleaning solvents or strong detergents to
clean the phone. Wipe it with a soft cloth slightly dampened in a mild
soap-and-water solution.
137
• Do not paint the phone. Paint can clog the device's moving parts and
prevent proper operation.
• Do not put the phone in or on heating devices, such as a microwave
oven, a stove or a radiator. The phone may explode when overheated.
• If your phone is equipped with an external antenna, use only the
supplied or an approved replacement antenna. Unauthorized antennas
or modified accessories may damage the phone and violate
regulations governing radio devices.
• If the phone, battery, charger or any accessory is not working properly,
take it to your nearest qualified service facility. The personnel there
will assist you, and if necessary, arrange for service.
Section 16: Warranty Information
Standard Limited Warranty
What is Covered and For How Long?
SAMSUNG TELECOMMUNICATIONS AMERICA, LLC ("SAMSUNG")
warrants to the original purchaser ("Purchaser") that SAMSUNG's
Phones and accessories ("Products") are free from defects in
material and workmanship under normal use and service for the
period commencing upon the date of purchase and continuing for
the following specified period of time after that date:
Phone
1 Year
Batteries
1 Year
Leather Case
90 Days
Holster
90 Days
Other Phone Accessories
1 Year
What is Not Covered? This Limited Warranty is conditioned upon
proper use of Product by Purchaser. This Limited Warranty does
not cover: (a) defects or damage resulting from accident, misuse,
abuse, neglect, unusual physical, electrical or electromechanical
stress, or modification of any part of Product, including antenna,
or cosmetic damage; (b) equipment that has the serial number
removed or made illegible; (c) any plastic surfaces or other
externally exposed parts that are scratched or damaged due to
normal use; (d) malfunctions resulting from the use of Product in
conjunction with accessories, products, or ancillary/peripheral
equipment not furnished or approved by SAMSUNG; (e) defects or
damage from improper testing, operation, maintenance,
installation, or adjustment; (f) installation, maintenance, and
service of Product, or (g) Product used or purchased outside the
United States or Canada.
This Limited Warranty covers batteries only if battery capacity
falls below 80% of rated capacity or the battery leaks, and this
Limited Warranty does not cover any battery if (i) the battery has
been charged by a battery charger not specified or approved by
SAMSUNG for charging the battery, (ii) any of the seals on the
battery are broken or show evidence of tampering, or (iii) the
battery has been used in equipment other than the SAMSUNG
phone for which it is specified.
What are SAMSUNG's Obligations? During the applicable warranty
period, SAMSUNG will repair or replace, at SAMSUNG's sole
option, without charge to Purchaser, any defective component
part of Product. To obtain service under this Limited Warranty,
Purchaser must return Product to an authorized phone service
Warranty Information
138
facility in an adequate container for shipping, accompanied by
Purchaser's sales receipt or comparable substitute proof of sale
showing the date of purchase, the serial number of Product and
the sellers' name and address. To obtain assistance on where to
deliver the Product, call Samsung Customer Care at 1-888-9874357. Upon receipt, SAMSUNG will promptly repair or replace the
defective Product. SAMSUNG may, at SAMSUNG's sole option,
use rebuilt, reconditioned, or new parts or components when
repairing any Product or replace Product with a rebuilt,
reconditioned or new Product. Repaired/replaced leather cases,
pouches and holsters will be warranted for a period of ninety (90)
days. All other repaired/replaced Product will be warranted for a
period equal to the remainder of the original Limited Warranty on
the original Product or for 90 days, whichever is longer. All
replaced parts, components, boards and equipment shall
become the property of SAMSUNG.
If SAMSUNG determines that any Product is not covered by this
Limited Warranty, Purchaser must pay all parts, shipping, and
labor charges for the repair or return of such Product.
WHAT ARE THE LIMITS ON SAMSUNG'S WARRANTY/LIABILITY?
EXCEPT AS SET FORTH IN THE EXPRESS WARRANTY CONTAINED
HEREIN, PURCHASER TAKES THE PRODUCT "AS IS," AND
SAMSUNG MAKES NO WARRANTY OR REPRESENTATION AND
THERE ARE NO CONDITIONS, EXPRESS OR IMPLIED, STATUTORY
139
OR OTHERWISE, OF ANY KIND WHATSOEVER WITH RESPECT TO
THE PRODUCT, INCLUDING BUT NOT LIMITED TO:
• THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR ANY
PARTICULAR PURPOSE OR USE;
• WARRANTIES OF TITLE OR NON-INFRINGEMENT;
• DESIGN, CONDITION, QUALITY, OR PERFORMANCE OF THE PRODUCT;
• THE WORKMANSHIP OF THE PRODUCT OR THE COMPONENTS
CONTAINED THEREIN; OR
• COMPLIANCE OF THE PRODUCT WITH THE REQUIREMENTS OF ANY
LAW, RULE, SPECIFICATION OR CONTRACT PERTAINING THERETO.
NOTHING CONTAINED IN THE INSTRUCTION MANUAL SHALL BE
CONSTRUED TO CREATE AN EXPRESS WARRANTY OF ANY KIND
WHATSOEVER WITH RESPECT TO THE PRODUCT. ALL IMPLIED
WARRANTIES AND CONDITIONS THAT MAY ARISE BY OPERATION
OF LAW, INCLUDING IF APPLICABLE THE IMPLIED WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE, ARE HEREBY LIMITED TO THE SAME DURATION OF
TIME AS THE EXPRESS WRITTEN WARRANTY STATED HEREIN.
SOME STATES/PROVINCES DO NOT ALLOW LIMITATIONS ON HOW
LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION
MAY NOT APPLY TO YOU. IN ADDITION, SAMSUNG SHALL NOT BE
LIABLE FOR ANY DAMAGES OF ANY KIND RESULTING FROM THE
PURCHASE, USE, OR MISUSE OF, OR INABILITY TO USE THE
PRODUCT OR ARISING DIRECTLY OR INDIRECTLY FROM THE USE
OR LOSS OF USE OF THE PRODUCT OR FROM THE BREACH OF
THE EXPRESS WARRANTY, INCLUDING INCIDENTAL, SPECIAL,
CONSEQUENTIAL OR SIMILAR DAMAGES, OR LOSS OF
ANTICIPATED PROFITS OR BENEFITS, OR FOR DAMAGES ARISING
FROM ANY TORT (INCLUDING NEGLIGENCE OR GROSS
NEGLIGENCE) OR FAULT COMMITTED BY SAMSUNG, ITS AGENTS
OR EMPLOYEES, OR FOR ANY BREACH OF CONTRACT OR FOR
ANY CLAIM BROUGHT AGAINST PURCHASER BY ANY OTHER
PARTY. SOME STATES/PROVINCES DO NOT ALLOW THE
EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL
DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT
APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL
RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY
FROM STATE TO STATE/PROVINCE TO PROVINCE. THIS LIMITED
WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE
ORIGINAL PURCHASER OF THIS PRODUCT AND STATES
PURCHASER'S EXCLUSIVE REMEDY. IF ANY PORTION OF THIS
LIMITED WARRANTY IS HELD ILLEGAL OR UNENFORCEABLE BY
REASON OF ANY LAW, SUCH PARTIAL ILLEGALITY OR
UNENFORCEABILITY SHALL NOT AFFECT THE ENFORCEABILITY
FOR THE REMAINDER OF THIS LIMITED WARRANTY WHICH
PURCHASER ACKNOWLEDGES IS AND WILL ALWAYS BE
CONSTRUED TO BE LIMITED BY ITS TERMS OR AS LIMITED AS
THE LAW PERMITS. THE PARTIES UNDERSTAND THAT THE
PURCHASER MAY USE THIRD-PARTY SOFTWARE OR EQUIPMENT
IN CONJUNCTION WITH THE PRODUCT. SAMSUNG MAKES NO
WARRANTIES OR REPRESENTATIONS AND THERE ARE NO
CONDITIONS, EXPRESS OR IMPLIED, STATUTORY OR
OTHERWISE, AS TO THE QUALITY, CAPABILITIES, OPERATIONS,
PERFORMANCE OR SUITABILITY OF ANY THIRDPARTY SOFTWARE
OR EQUIPMENT, WHETHER SUCH THIRD-PARTY SOFTWARE OR
EQUIPMENT IS INCLUDED WITH THE PRODUCT DISTRIBUTED BY
SAMSUNG OR OTHERWISE, INCLUDING THE ABILITY TO
INTEGRATE ANY SUCH SOFTWARE OR EQUIPMENT WITH THE
PRODUCT. THE QUALITY, CAPABILITIES, OPERATIONS,
PERFORMANCE AND SUITABILITY OF ANY SUCH THIRD-PARTY
SOFTWARE OR EQUIPMENT LIE SOLELY WITH THE PURCHASER
AND THE DIRECT VENDOR, OWNER OR SUPPLIER OF SUCH
THIRD-PARTY SOFTWARE OR EQUIPMENT, AS THE CASE MAY BE.
This Limited Warranty allocates risk of Product failure between
Purchaser and SAMSUNG, and SAMSUNG's Product pricing
reflects this allocation of risk and the limitations of liability
contained in this Limited Warranty. The agents, employees,
distributors, and dealers of SAMSUNG are not authorized to make
modifications to this Limited Warranty, or make additional
warranties binding on SAMSUNG. Accordingly, additional
statements such as dealer advertising or presentation, whether
oral or written, do not constitute warranties by SAMSUNG and
should not be relied upon.
Warranty Information
140
Precautions for Transfer and Disposal
If data stored on this device is deleted or reformatted using the
standard methods, the data only appears to be removed on a
superficial level, and it may be possible for someone to retrieve
and reuse the data by means of special software.
To avoid unintended information leaks and other problems of this
sort, it is recommended that the device be returned to Samsung’s
Customer Care Center for an Extended File System (EFS) Clear
which will eliminate all user memory and return all settings to
default settings. Please contact the Samsung Customer Care
Center for details.
Important!: Please provide warranty information (proof of purchase) to
Samsung’s Customer Care Center in order to provide this service
at no charge. If the warranty has expired on the device, charges
may apply.
Customer Care Center:
1000 Klein St.
Plano, TX 75074
Toll Free Tel: 1.888.987.HELP (4357)
141
Samsung Telecommunications America, LLC:
1301 East Lookout Drive
Richardson, Texas 75082
Phone: 1-800-SAMSUNG (726-7864)
Important!: If you are using a handset other than a standard numeric keypad,
dial the numbers listed in brackets.
Phone: 1-888-987-HELP (4357)
©2008 Samsung Telecommunications America. All rights
reserved.
No reproduction in whole or in part allowed without prior written
approval. Specifications and availability subject to change
without notice.
Index
Numerics
2-Sec Pause 40
A
Adding a New Contacts Entry
Dial Method 38
Adjust
Key Tone 104
Ringer Setting 18 24
,
B
Battery 4
Charging 5
Low Battery Indicator 6
Removal 5
Travel Adapter 6
Bluetooth 84
Add New Device 85
Connecting 86
Registered List 85
Settings 86
Turn On/Off 85
Browser 62
How Browser Keys Work 63
Launching Browser 62
Using Browser 62
Using Links 63
C
Call Answer 24
Call Answer Mode 16
Call Block 25
Call Functions
Answering a Call 23
Making a Call 19
Call Notification Types 23
Call Settings 104
Auto Answer 105
Auto Retry 105
Call Answer 105
TTY Mode 105
Voice Privacy 106
Call Timer 28
Call Waiting 24
Caller ID 25
Calls
Call Timer 28
Data Counter 29
Erase Logs 27
Incoming 26
Missed 27
Outgoing 26
Store Numbers 29
Calls Menu 26
Camera 65
Brightness 73
Color Tones 71
Photo Gallery 73
Save Pictures 68
Screen Icons 67
Screen Layout 67
Taking Pictures 65
Zoom 73
Camera Mode 18
Camera Options
Multi Shot 70
Quality 70
Resolution 70
Self Timer 69
White Balance 70
Camera Screen Layout 67
142
Card Memory
Formatting 116
Management 114
Changing Your Settings 100
Clear Key 13
Contacts 36
Add Pauses 40
Adding a New Contacts Entry 38
Edit Name and Numbers 39
Opening 36
Save a Number After a Call 42
Contacts List
Memory 48
Create Messages 49
D
Data Counter 29
Data, View Counters 29
Display Screen Icons 15
Display Settings 100
Backlight 102
Banner 102
Clock Format 101
Dialing Font Size 102
Menu Style 101
Theme Color 101
143
Wallpaper 101
Draft Folder 57
Draft Messages 57
Understanding this User Manual 4
Voicemail 7
Go Back One Menu 31
E
Edit Contacts Name and Numbers 39
End Key 14
Entering Text
Entering Numbers 35
Entering Symbols 35
Using T9 Mode 34
Erase Logs 27
Erase Messages 60
Erase Voice Memos 83
ESN 117
Exit Browser 62
H
HAC 130
Health and Safety Information 119
I
Icon Glossary 117
Icons
Number Type 39 43
Ignore Calls 25
Inbox Folder 55
Incoming Calls 23
Incoming Calls Menu 26
Input Mode 16
,
F
File Save Options 113
Formatting a Memory Card 116
Formatting a microSD Card 116
G
Gallery
Photo 73
Games & Apps 64
Getting Started
Activating Your Phone 6
K
Key Tone 104
L
Launching Voice Service 95
Left Soft Key 13
Lock Mode 16
M
MEID 117
Memo Pad
Add a Memo 87
Review, Edit, and Erase Memos 87
Memory Card
Formatting 116
Memory Card (Optional)
Install 7
Message Folder
Draft Box 57
Erase Messages 60
Inbox 55
Outbox 56
Voice 59
Voicemail 59
Messages and Lock Mode 57
Messages, Creating 49
Messages, Receive in a Call 50
Messaging
Types of Messages 49
microSD
Formatting 116
microSDTM 7
Missed Calls Menu 27
Mode
Call Answer 16
Camera 18
Input 16
Lock 16
Silent 17
Standby 16
Talk 17
Vibrate 18
M-Ratings 131
Msg Setting Sub Menu 61
Multi Shot 70
Multimedia 76
N
Navigation Key 14
Navigation Key Shortcuts 32
Notes and Tips 4
Notes, Description 4
Number Type Icons 39 43
,
O
OK Key 13
Outbox Folder 56
Outbox, Reviewing Messages 56
Outgoing 26
,
P
Pause Dial 20 41
Pauses, adding 40
Personal Organizer
Alarm Clock 88
Calculator 90
Calendar 86
Memo Pad 87
Voice Memo 82
World Time 89
Phone Info
ESN/MEID 117
Icon Glossary 117
Phone Number 116
Version 117
Phone Memory
Freeing 113 115
Usage Info 113 115
Phone Number 116
Phone Safety 129
Phone Settings 106
Airplane Mode 106
Language 107
Quick Search 111
Security Settings 107
Set Time 110
System Select 110
Photo Gallery 73
Photos
Sending 74
,
,
144
Picture Messages
Online Viewing 54
Receiving 54
Send in Camera Mode 50
Q
QWERTY Keypad 33
R
Receive Messages in Call 50
Receive Picture Messages 54
Receive Text Messages 50
Record Memos 82
Return to Last Menu 31
Review Calls 28
Reviewing Outbox 56
Right Soft Key 13
S
SAR Values 119
Save a Number After a Call 42
Save Pictures 68
Security Settings 107
Change Lock 108
Emergency # 108
Erase All Entries 109
Lock Phone 107
Resetting Your Phone 109
145
Restriction 109
Send Key 14
Send Picture Messages 74
Settings
Airplane Mode 106
Alerts 104
Auto Answer 105
Auto Retry 105
Backlight 102
Banner 102
Call 104
Call Answer 105
Call Settings 104
Change Lock 108
Clock Format 101
Dialing Font Size 102
Display 100
Emergency # 108
Erase All Entries 109
Key Tone 104
Language 107
Location 100
Lock Phone 107
Memory Info 112
Menu Style 101
Phone Info 116
Phone Settings 106
Quick Search 111
Resetting Your Phone 109
Restriction 109
Ringer Type 103
Security 107
Security Settings 107
Set Time 110
Sound 103
System Select 110
Theme 101
TTY Mode 105
Voice Privacy 106
Volume/Vibrate 103
Wallpaper 101
Shortcut to Menus 32
Shutter Sound 72
Silence Ringer 25
Silent Mode
Entering 17
Exiting 17
Sound Settings
Alerts 104
Key Tone 104
Ringer Type 103
Volume/Vibrate 103
Standard Limited Warranty 138
Standby Mode 16
Store Numbers After a Call 42
T
Taking Pictures 65
Talk Mode 17
Text Conventions 4
Text Entry Modes 33
Text Messages, Receiving 50
Text Modes
Changing 33
Three-Way Calling 19
Time, Set 110
Timer, Calls 28
Tip, Description 4
Tools 84
Tools Menu 84
T-Ratings 131
TTY Mode 105
U
UL Certification 120
Understanding Your Contacts
Deleting a Contacts entry 48
Editing an existing Contacts entry 39
Finding a Contacts entry 37
Understanding Your Phone
Closed View of Your Phone 9
Command Keys 13
Display Screen 14
Features of Your Phone 9
Open View of Your Phone 11
Using Abc Mode 35
VoiceSignal
About VoiceSignal 99
Voice Memos 82
W
Wait 40
Warranty Information 138
V
Version 117
Vibrate Mode 18
Voice Folder 59
Voice Launch 99
Voice Memo 82
Erase All Memos 83
Record Memos 82
Review Memos 82
Voice Service
Launching 95
Voice SVC 95
Voicemail
Checking 59
Listening To 7
146
147
Download PDF
Similar pages