Maktec Catalogue
2013/2014
Index
New models are highlighted in red
MT001
MT062SK2
MT063SK2
MT064SK2
MT070E
MT071E
MT080E
3
4
4
4
3
3
3
MT362
MT370
MT401
MT410
MT411
MT412
MT430
9
9
9
6
6
6
9
MT652
MT653
MT690E
MT691E
MT811
MT814
MT818
5
5
3
3
4
4
4
MT920
MT921
MT922
MT923
MT924
MT941
MT951
8
8
8
8
8
8
7
MT081E
MT191
MT241
MT360
3
9
6
9
MT431
MT580
MT606
MT607
9
8
4
4
MT870
MT901
MT910
MT911
6
7
7
7
MT954
MT955
MT960
7
7
7
Note
• Makita reserves the right to change specifications of parts and accessories without notice.
• The value of “Weight” in this catalogue is measured according to EPTA Procedure 01/ 2003.
• Li-ion products, battery will also be included in the “Net Weight”.
• Please state required voltage when ordering product as there are choices of either High Voltage (220V)version or Low Voltage (110V)version.
Icon
Double Insulation
Mechanical 2-Speed
SDS-PLUS Shank
Bayonet Shank Jig Saw Blade
Packing
Variable Speed
Keyless Chuck
Torque Limiter
Hook & Loop
2 Operation Mode
Brake
Torque Setting 16
Orbital Cutting
Dust Collecting
110V Low Voltage(110V)version available
Reversing
Torque Setting 19
Makita Shank Jig Saw Blade
Carrying Case
220V High Voltage(220V)version available
Battery & Charger Time Reference Chart
Power Cell and Charger
Li-ion
Battery
L1851
L1451
DC1851
(195421-0)
(195419-7)
(195356-5)
For Model︰
MT001、MT691E、
MT081E、MT071E
For Model︰
MT001、MT690E、
MT080E、MT070E
1.1Ah
60mins
(193941-8)
Ni-Cd
Battery
mins
(193818-7)
2
(193816-1)
(193711A5)
(193710A7)
Charging time
(193959-9)
(193841-2)
mins
Cordless Driver Drill (Li-ion)
MT071E 13mm (1/2")
Cordless Driver Drill (Li-ion)
MT070E 10mm (3/8")
Light weight. Easy to control.
Light weight. Easy to control.
1.1
Capacity
1.1
Capacity
Steel : 13mm (1/2")
Wood : 36mm (1-7/16")
No load speed (rpm) Hi : 0-1,400
Lo : 0-400
No load speed (rpm) Hi : 0-1,400
Lo : 0-400
Max. fastening torque Hard / Soft : 42 / 24N.m
Max. fastening torque Hard / Soft : 30 / 14N.m
Dimensions (L x W x H) 223x82x239mm
(8-3/4"x3-1/4"x9-3/8")
Dimensions (L x W x H) 201x82x236mm
(7-7/8"x3-1/4"x9-1/4")
Net Weight
Net Weight
1.7kg (3.7lbs)
2
1.4kg (3.1lbs)
2
Charger, Battery Cartidge 2
Charger, Battery Cartidge 2
Cordless Hammer Driver Drill (Li-ion)
MT081E 13mm (1/2")
Cordless Hammer Driver Drill (Li-ion)
MT080E 10mm (3/8")
Light weight. Easy to control.
Light weight. Easy to control.
1.1
Capacity
2
Steel : 10mm (3/8")
Wood : 25mm (1")
1.1
Capacity
Steel : 13mm (1/2")
Wood : 36mm (1-7/16")
Masonry : 13mm (1/2")
Steel : 10mm (3/8")
Wood : 25mm (1")
Masonry : 10mm (3/8")
Impacts per minute (ipm) Hi : 0-21,000
Lo : 0-6,000
No load speed (rpm) Hi : 0-1,400
Lo : 0-400
Impacts per minute (ipm) Hi : 0-21,000
Lo : 0-6,000
No load speed (rpm) Hi : 0-1,400
Lo : 0-400
Max. fastening torque Hard / Soft : 42 / 24N.m
Max. fastening torque Hard / Soft : 30 / 14N.m
Dimensions (L x W x H) 238x82x239mm
(9-3/8"x3-1/4"x9-3/8")
Dimensions (L x W x H) 216x82x236mm
(8-1/2"x3-1/4"x9-1/4")
Net Weight
1.7kg (3.7lbs)
2
Net Weight
Charger, Battery Cartidge 2
Charger, Battery Cartidge 2
Cordless Impact Driver (Li-ion)
MT691E
Cordless Impact Driver (Li-ion)
MT690E
High operation efficiency with 18V Li-ion battery.
High operation efficiency with 14.4V Li-ion battery.
1.1
Machine screw
:M4 - M8 (5/32" - 5/16")
Standard bolt
: M5 - M14 (3/16" - 9/16")
High tensile bolt
: M5 - M12 (3/16" - 1/2")
Coarse thread (in length)
: M22 - M125 (7/8" - 4-7/8")
Impacts per minute (ipm) 0-3,000
No load speed (rpm) 0-2,400
Max. fastening torque 135N.m (1,200in.lbs)
Dimensions (L x W x H) 173x82x225mm
(6-13/16"x3-1/4"x8-7/8")
Net Weight
1.5kg (3.3lbs)
Capacity
2
(Bit not included)
Charger, Battery Cartidge 2
1.5kg (3.3 lbs)
1.1
Capacity
Machine screw
: M4 - M8 (5/32" - 5/16")
Standard bolt
: M5 - M14 (3/16" - 9/16")
High tensile bolt
: M5 - M12 (3/16" - 1/2")
Coarse thread (in length)
: M22 - M125 (7/8" - 4-7/8")
Impacts per minute (ipm) 0-3,000
No load speed (rpm) 0-2,400
Max. fastening torque 130N.m (1,150in.lbs)
Dimensions (L x W x H) 173x82x225mm
(6-13/16"x3-1/4"x8-7/8")
Net Weight
1.4kg (3.1lbs)
2
(Bit not included)
Charger, Battery Cartidge 2
Rechargeable Flashlight (Li-ion)
MT001
MT690_act_1.eps
9 LEDs for wide and bright illumination.
1.1
Continuous use (hours) 15hours
Dimensions (L x W x H) 313x84x101mm
(12-3/8"x3-5/16"x4")
Net Weight
0.61kg (1.3lbs)
(Charger and Battery Cartidge not included)
Shoulder Strap
3
Cordless Driver Drill (Ni-Cd)
MT064SK2 10mm (3/8")
Cordless Driver Drill (Ni-Cd)
MT063SK2 10mm (3/8")
Soft grip handle pad provides a non-slip surface.
2 speed variable speed control.
1.3
Compact size tool body with perfect tool gripping
angle and overall balance. 2 speed variable speed control.
Capacity
Steel : 10mm (3/8")
Wood : 24mm (15/16")
Wood screw :
5.1x63mm (3/16"x2-1/2")
No load speed (rpm) Hi : 0-1,300
Lo : 0-400
No load speed (rpm)
Hi : 0-1,000
Lo : 0-350
Max. fastening torque Hard / Soft : 28 / 15N.m
Max. fastening torque Hard / Soft : 21 / 14N.m
Dimensions (L x W x H) 214x94x249mm
(8-3/8"x3-11/16"x9-3/4")
Dimensions (L x W x H) 203x93x243mm
(8"x3-5/8"x9-9/16")
Capacity
Steel : 10mm (3/8")
Wood : 25mm (1")
Wood screw :
6.0x75mm (1/4"x2-15/16")
Net Weight
1.5kg (3.3lbs)
Net Weight
1.8kg (4.0lbs)
3
3
Charger, Battery Cartidge2
Charger, Battery Cartidge2
Cordless Driver Drill (Ni-Cd)
MT062SK2 10mm (3/8")
Drill
MT606
Compact size tool body with perfect tool gripping
angle and overall balance. 2 speed variable speed control.
1.3
Capacity
110V
220V
10mm (3/8")
Powerful motor, 450W power input.
85
Continuous rating Input 450W
Steel : 10mm (3/8")
Wood : 21mm (13/16")
Wood screw
: 5.1x38mm (3/16"x1-1/2")
No load speed (rpm) Hi : 0-1,000
Lo : 0-350
Capacity
Steel : 10mm (3/8")
Wood : 25mm (1")
No load speed (rpm)
0 - 3,000
Max. fastening torque Hard / Soft : 18 / 13N.m
Dimensions (L x W x H) 229x64x175mm
(9"x2-1/2"x6-7/8")
Dimensions (L x W x H) 203x76x243mm
(8"x3"x9-9/16")
Net Weight
1.3kg (2.9lbs)
Power supply cord
2.0m (6.6ft)
Net Weight
1.3kg (2.9lbs)
8
3
Charger, Battery Cartridge2
Drill
MT607
1.3
Chuck Key
110V
220V
10mm (3/8")
Powerful motor, 450W power input.
Hammer Drill
MT811 13mm (1/2")
85
110V
220V
Powerful motor, 430W power input.
Continuous rating Input 450W
Capacity
Steel : 10mm (3/8")
Wood : 25mm (1")
No load speed (rpm)
0 - 3,000
Dimensions(L x W x H)
234x64x175mm
(9-1/4"x2-1/2"x6-7/8")
Net Weight
1.3kg (2.9lbs)
Power supply cord
2.0m (6.6ft)
Continuous rating Input 430W
Capacity
Concrete : 13mm (1/2")
Steel : 13mm (1/2")
Wood : 18mm (11/16")
Impacts per minute (ipm) 0-30,800
0-2,800
No load speed (rpm)
8
8
85
Dimensions (L x W x H)
272x71x194mm
(10-3/4"x2-13/16"x7-5/8")
Net Weight
1.6kg (3.5lbs)
Power supply cord
2.0m (6.6ft)
Side Grip,Depth Gauge
Hammer Drill
MT818 13mm (1/2")
110V
220V
High power 430W motor
Hammer Drill
MT814 16mm (5/8")
85
8
Side Grip,Depth Gauge
4
85
Continuous rating Input 710W
Continuous rating Input 430W
Capacity
220V
Tool body ergonomically designed to give maximum power
thrust.
Capacity
Concrete : 13mm (1/2")
Steel : 13mm (1/2")
Wood : 18mm (11/16")
Concrete : 16mm (5/8")
Steel : 13mm (1/2")
Wood : 30mm (1-3/16")
Impacts per minute (ipm) 0-30,800
No load speed (rpm) 0-2,800
Impacts per minute (ipm) 0-48,000
No load speed (rpm)
0-3,200
Dimensions (L x W x H) 258x71x192mm
(10-1/8"x2-13/16"x7-9/16")
Dimensions (L x W x H)
296x77x202mm
(11-5/8"x3"x8")
Net Weight
1.7kg (3.8lbs)
Net Weight
2.1kg (4.6lbs)
Power supply cord
2.0m (6.6ft)
Power supply cord
2.0m (6.6ft)
5
Side Grip,Depth Gauge, Chuck Key
MT652/MT653 High Speed Drill
Rotation speed up to 4,500rpm
Ideal for drilling small diameter holes
Easy operation thanks to
light weight of only 0.9kg.
Rubberized soft grip,
easy to handle.
High Speed Drill
Photo︰MT652
High Speed Drill
110V
220V
MT652 6.5mm(1/4")
85
Fine drilling at high speeds.
Continuous rating Input 230W
Capacity
Steel : 6.5mm (1/4")
Wood : 9mm (11/32")
Capacity
Steel : 6.5mm (1/4")
Wood : 9mm (11/32")
No load speed (rpm)
4,500
No load speed (rpm)
0-4,500
Dimensions(L x W x H) 200x 63 x 164mm
(7-7/8"x2-1/2"x6-1/2")
Chuck Key
85
Fine drilling at high speeds.
Continuous rating Input 230W
5
110V
220V
MT653 6.5mm(1/4")
Net Weight
0.9kg (2.0lbs)
Power supply cord
2.0m (6.6ft)
Dimensions(L x W x H) 202x 64 x 165mm
(8"x2-1/2"x6-1/2")
5
Net Weight
1kg (2.2lbs)
Power supply cord
2.0m (6.6ft)
Chuck Key
5
Rotary Hammer
MT870 22mm (7/8”)
459
Adapted for SDS-PLUS bits. Operation mode change lever positioned at
the bottom of gear housing for reduced possibility breakage.
110V
220V
Continuous rating Input 710W
Torque limiter
When drill bit hits against reinforcements,
Torque Limiter operates to stop.
One-touch sliding chuck
for easy bit change
Rubberized soft grip
Capacity
Concrete : 22mm (7/8")
Steel : 13mm (1/2")
Wood : 32mm (1-1/4")
provides more comfort and
control.
Impacts per minute (ipm) 0-4,350
Less bit wobbling
No load speed (rpm)
0-1,100
Dimensions (L x W x H)
362x71x194mm
(14-1/4"x2-13/16"x7-5/8")
Net Weight
2.5kg (5.5lbs)
Power supply cord
5.0m (16.4ft)
Side Grip, Depth Gauge
High
Durability
(Bit not included)
Rotation reversing system
using brush holder unit
Features the following advantages:
• Protects Carbon Brush from
foreign dusts and debris.
• Same speed and torque even
in reverse rotation
2 operation modes;
• Rotation only
• Rotation with hammering
Operation mode change lever
positioned at the bottom of gear
housing for reduced possibility
of breakage.
Easy-to-grip handle
ergonomically designed to:
• give maximum power thrust.
• provide a sure and comfortable grip
in any operation; overhead application,
drilling with palm-up or palm-down grip.
3
Portable Cut-off
MT241 355mm (14")
Powerful Cutting with High Power Motor.
110V 203A
220V
Cutter
MT412
Continuous rating Input 1,250W
Capacity(Max. cutting) 110mm wheel
: 32.5mm (1-1/4")
125mm wheel
: 40mm (1-9/16")
Blade diameter
110mm(4-3/8")/125mm (5")
No load speed (rpm) 12,000
Dimensions (L x W x H) 233x216x166mm
(9-1/8"x8-1/2"x6-1/2")
Net Weight
3.0kg (6.6lbs)
Power supply cord 2.0m (6.6ft)
Continuous rating Input 2,000W
Wheel diameter
355mm (14")
No load speed (rpm) 3,800
Dimensions (L x W x H) 500x280x620mm
(19-3/4"x11"x24-3/8")
Net Weight
15.7kg (34.6lbs)
Power supply cord
2.5m (8.2ft)
1
2
Abrasive Cut-Off Wheel, Socket Wrench
Cutter
MT410
110V 303A
220V
More powerful cutting in stone masonry, tile and concrete.
Wrench, Hex Wrench
6
(Diamond wheel,Tube and Tube holder not included)
Wrench, Hex Wrench, Adaptor Ring
110mm (4-3/8")
4
110V 303A
220V
125mm (5")
Can install 110mm or 125mm wheel.
Cutter
MT411
110mm (4-3/8")
Increased durability of motor by improvement
of dust-protection.
110V 303A
220V
Continuous rating Input 1,200W
Continuous rating Input 900W
Capacity(Max. cutting) 32mm (1-1/4")
Capacity(Max. cutting) 32mm (1-1/4")
Blade diameter
110mm (4-3/8")
Blade diameter
No load speed (rpm)
13,000
No load speed (rpm) 12,000
110mm (4-3/8")
Dimensions (L x W x H) 226x211x163mm
(8-7/8"x 8-5/16"x6-3/8")
Dimensions (L x W x H) 217x198x165mm
(8-1/2"x7-3/4"x6-1/2")
Net Weight
2.9kg (6.4lbs)
Net Weight
2.8kg (6.2lbs)
Power supply cord
2.0m (6.6ft)
Power supply cord
2.0m (6.6ft)
(Diamond wheel and Tube not included)
4
Wrench, Hex Wrench
(Diamond wheel and Tube not included)
Angle Grinder
MT951 100mm (4")
220V
Angle Grinder
MT954 100mm (4")
411A
Incredibly light but powerful one-hand grinder with
slimmer grip.
Powerful motor, 570W power input.
*Upper Slide Switch
*Rear Toggle Switch
8
Continuous rating Input 570W
Depressed Centre Wheel 100mm (4")
diameter:
Abrasive Disc diameter: 100mm (4")
Wire Cup Brush diameter: 75mm (3")
No load speed (rpm) 12,000
No load speed (rpm)
12,000
Dimensions (L x W x H)
266x118x95mm
(10-1/2"x4-5/8"x3-3/4")
Dimensions (L x W x H)
256x118x92mm
(10-1/8"x4-5/8"x3-5/8")
Net Weight
1.8kg (3.9lbs)
Net Weight
1.5kg (3.3lbs)
Power supply cord
2.0m (6.6ft)
Power supply cord
(Depressed Center Wheel not included)
Angle Grinder
MT955 100mm (4")
220V
8
411A
Lock Nut Wrench
220V
High power and easy to grip.
Continuous rating Input 710W
*Rear Toggle Switch
2.0m (6.6ft)
(Depressed Center Wheel not included)
Angle Grinder
MT960 100mm (4")
710W powerful Grinder.
8
Continuous rating Input 570W
Depressed Centre Wheel 100mm (4")
diameter:
Abrasive Disc diameter: 100mm (4")
Wire Cup Brush diameter:75mm (3")
Lock Nut Wrench
*Upper Slide Switch
110V 411A
220V
459
Continuous rating Input 720W
Depressed Centre Wheel 100mm (4")
diameter:
Abrasive Disc diameter: 100mm (4")
Wire Cup Brush diameter: 75mm (3")
Depressed Centre Wheel 100mm (4")
diameter:
Abrasive Disc diameter: 100mm (4")
Wire Cup Brush diameter: 75mm (3")
No load speed (rpm)
11,000
No load speed (rpm)
12,000
Dimensions (L x W x H)
276x118x98mm
(10-7/8"x4-5/8"x3-7/8")
Dimensions (L x W x H)
266x117x100mm
(10-1/2"x4-5/8"x4")
Net Weight
1.5kg (3.3lbs)
Net Weight
1.4kg (3.1lbs)
Power supply cord
2.0m (6.6ft)
(Depressed Center Wheel not included)
Lock Nut Wrench, Side Grip
8
2.0m (6.6ft)
Power supply cord
(Depressed Center Wheel not included)
Lock Nut Wrench
Angle Grinder
MT901 230mm (9")
220V
204A
Industrial performance and durability.
*Trigger Switch
Continuous rating Input 2,000W
Depressed Centre Wheel 230mm (9")
diameter:
Wire Cup Brush diameter: 110mm (4-3/8")
No load speed (rpm)
6,600
Dimensions (L x W x H)
468x249x138mm
(18-7/16"x9-3/4"x5-7/16")
Net Weight
4.7kg (10.4lbs)
Power supply cord
2.0m (6.6ft)
2
(Depressed Center Wheel not included)
Lock Nut Wrench, Side Grip
Die Grinder
MT910 6mm (1/4")
220V
Die Grinder
MT911 6mm (1/4")
411A
Easy to grip small circumference housing.
Continuous rating Input 260W
8
Wrench2, Collet Cone, Gloves
220V
411A
High speed and high power.
Continuous rating Input 480W
Capacity
Collet : 6mm (1/4")
Capacity
Collet : 6mm (1/4")
Wheel diameter
24mm (3/4")
Wheel diameter
16mm (5/8")
No load speed (rpm)
25,000
No load speed (rpm) 33,000
Dimensions (L x W x H)
328x63x63mm
(13"x2-1/2"x2-1/2")
Dimensions (L x W x H) 350x75x75mm
(13-3/4"x2-15/16"x2-15/16")
Net Weight
1.1kg (2.4lbs)
Net Weight
1.4kg (3.1lbs)
Power supply cord
2.0m (6.6ft)
Power supply cord
2.0m (6.6ft)
8
Wrench2, Collet Cone, Gloves
7
Random Orbit Sander
MT924 125mm (5")
220V
Random Orbit Sander
MT922 125mm (5")
419A
Ergonomically designed palm grip for comfortable handling.
419A
Continuous rating Input 240W
Continuous rating Input 240W
Pad diameter
Pad diameter
123mm (4-7/8")
123mm (4-7/8")
Abrasive disc diameter 125mm (5")
Abrasive disc diameter 125mm (5")
Orbits per minute (opm)12,000
Orbits per minute (opm) 12,000
Dimensions (L x W x H) 153x123x144mm
(6"x4-7/8"x5-5/8")
Dimensions (L x W x H) 127x123x142mm
(5"x4-7/8"x5-5/8")
Net Weight
1.2kg (2.6lbs)
Net Weight
1.1kg (2.4lbs)
2.0m (6.6ft)
Power supply cord
2.0m (6.6ft)
Power supply cord
6
4
Abrasive Paper, Dust Bag
Abrasive Disc
Finishing Sander
MT920 112mm (4-3/8")
220V
419A
Finishing Sander
MT921 93mm (3-5/8")
220V
64A
Comfortable gripping and lightweight.
Extremely versatile sander.
Continuous rating Input 180W
Continuous rating Input 180W
Pad size
112 x 102mm (4-3/8 " x 4")
Pad size
93 x 185mm (3-5/8" x 7-1/4")
Abrasive paper size
114 x 140mm (4-1/2" x 5-1/2")
Abrasive paper size
93 x 228mm (3-5/8" x 9")
Orbits per minute (opm) 14,000
Orbits per minute (opm) 12,000
Dimensions (L x W x H) 110x112x133mm
(4-5/16"x4-3/8"x5-1/4")
Dimensions (L x W x H) 214x92x147mm
(8-3/8"x3-5/8"x5-3/4")
0.9kg (2.0lbs)
Net Weight
Power supply cord 2.0m (6.6ft)
Net Weight
1.3kg (2.9lbs)
Power supply cord
2.0m (6.6ft)
5
8
Abrasive Papers 6
Abrasive Papers 6
Finishing Sander
MT923 93mm (3-5/8")
Belt Sander
220V
64A
Ergonomic tool body fits user’s hand perfectly.
MT941
Continuous rating Input 940W
Pad size
92 x 185mm (3-5/8" x 7-1/4")
Belt size
100 x 610mm ( 4 x 24")
Abrasive paper size
93 x 228mm (3-5/8" x 9")
Belt speed
380m / min (1,250ft/min)
Net Weight
1.4kg (3.1lbs)
Power supply cord
2.0m (6.6ft)
Dimensions (L x W x H) 354x175x169mm
(14"x6-7/8"x6-5/8")
Net Weight
6.2kg (13.7lbs)
Power supply cord
2.0m (6.6ft)
2
3
Abrasive Paper, Punch Plate, Dust Bag
Abrasive Belt,Step, Dust Bag Assembly,Carbon Plate
Circular Saw
MT580 185mm (7-1/4")
Pivot portion of blade case is assembled with
screw and hex nut for easy disassembling.
110V 303A
220V
Continuous rating Input 1,050W
Max cutting capacity
at 0 degrees : 66mm (2-5/8")
at 45 degrees : 44mm (1-3/4")
Blade diameter
185mm (7-1/4")
No load speed (rpm)
4,700
Dimensions (L x W x H) 286x231x242mm
(11-1/4"x9-1/8"x9-1/2")
Net Weight
Saw Blade, Guide Rule, Hex Wrench
153A
Continuous rating Input 190W
Dimensions (L x W x H) 252x92x154mm
(9-7/8"x3-5/8"x6-1/16")
2
220V
100mm (4")
Industrial performance and durability.
Orbits per minute (opm) 12,000
8
220V
Fast and smooth sanding thanks to random-orbit action.
3.5kg (7.7lbs)
Power supply cord 2.0m (6.6ft)
Jig Saw
MT430
220V
Jig Saw
MT431
411A
Rigid cylindrical housing.
5
220V
64A
High power and Lightweight.
Continuous rating Input 450W
Continuous rating Input 450W
Capacity
Wood : 55mm (2-3/16")
Steel : 6mm (1/4")
Capacity
Wood : 65mm (2-9/16")
Steel : 6mm (1/4")
Length of stroke
26mm (1")
Length of stroke
18mm (11/16")
Strokes per minute(spm) 0-3,100
Strokes per minute (spm) 0-3,100
Dimensions(L x W x H) 219x85x191mm
(8-5/8"x3-3/8"x7-1/2")
Dimensions (L x W x H)
214x75x202mm
(8-3/8"x2-15/16"x8")
Net Weight
2.5kg (5.5lbs)
Net Weight
1.9kg (4.2lbs)
Power supply cord
2.0m (6.6ft)
Power supply cord
2.0m (6.6ft)
5
Hex Wrench
Jig Saw Blade, Hex Wrench
Power Planer
MT191 82mm (3-1/4")
Trimmer
MT370 1/4"
220V
411A
High planing capacity.
Transparent base for clear view of trimming
area and sight line.
110V 411A
220V
Continuous rating Input 500W
Continuous rating Input 530W
Planing width
82mm (3-1/4")
Capacity
Collet : 1/4"
Planing depth
2mm (1/16")
No load speed(rpm)
35,000
No load speed(rpm)
16,000
Dimensions (L x W x H) 82x90x199mm
(3-1/4"x3-1/2"x7-7/8")
Dimensions (L x W x H) 285x157x160mm
(11-1/4"x6-3/16"x6-5/16")
Net Weight
2.7kg (6.0lbs)
Power supply cord
2.0m (6.6ft)
Net Weight
1.6kg (3.5lbs)
Power supply cord
2.0m (6.6ft)
4
3
Planer Blade2, Blade Gauge Assembly, Socket Wrench, Guide Rule, Planer Blade Collet
Trimmer Guide Assembly, Straight Guide Assembly, Templet Guide, Straight Bit, Wrench2
Router (Plunge type)
MT360 1/2"
Router (Plunge type)
MT362 1/2"
220V
203A
Continuous rating Input 1,650W
Continuous rating Input 1,650W
Capacity
Collet : 1/2"
Capacity
Collet : 1/2"
Plunge capacity
0 - 60mm (0 - 2-3/8")
Plunge capacity
0 - 60mm (0 - 2-3/8")
Base diameter
160mm (6-5/16")
Base diameter
160mm (6-5/16")
No load speed(rpm)
22,000
No load speed(rpm)
22,000
Dimensions (L x W x H) 287x160x300mm
(11-1/4"x6-5/16"x11-3/4")
Net Weight
2
110V 203A
220V
Easy to control.
Heavy-duty routering expert with powerful motor.
5.5kg (12.1lbs)
Power supply cord
2.0m (6.6ft)
Trimmer Guide Assembly, Straight Guide Assembly, Straight Bit, Wrench2, Collet Sleeve2, Guide Holder Assembly, Dust Cover
Blower
MT401
110V
220V
Powerful motor.
Dimensions (L x W x H) 284x148x300mm
(11-1/8"x5-7/8"x11-3/4")
2
Net Weight
5.5kg (12.1lbs)
Power supply cord
2.0m (6.6ft)
Trimmer Guide Assembly, Straight Guide Assembly, Straight Bit, Wrench2, Collet Sleeve2, Guide Holder Assembly, Dust Cover
85
Continuous rating Input 530W
Air Volume
1.2-2.9 m3/min
No load speed(rpm)
8,500-16,000
Dimensions (L x W x H) 428x163x212mm
(16-7/8"x6-3/8"x8-3/8")
Net Weight
1.5kg (3.4lbs)
Power supply cord
2.0m (6.6ft)
3
Nozzle
9
Carbon Brush
Carbon Brush
No.(CB-)
Part No.
CB-153A
B-80117
MT940
MT941
CB-203A
B-80341
MT240
MT241
MT360
MT362
CB-303A
B-80379
MT110
MT410
MT411
MT412
MT560
MT580
MT190
MT191
MT370
MT430
MT910
MT911
MT912
MT951
MT954
MT955
MT958
MT959
MT924
MT925
MT607
CB-411A
B-80391
For Model
CB-419A
B-80422
MT920
MT922
CB-459
194722-3
MT870
MT960
CB-64A
B-80254
MT401
MT431
MT606
MT650
MT921
MT923
MT400
MT401
MT603
MT606
MT607
MT811
MT813
MT814
MT818
MT652
MT653
MT900
MT901
MT902
CB-85
191998-3
Auto-cut Carbon Brush
CB-204A
10
B-80145
11
Trademarks Patent
Above trademarks have been patented at the Intellectual Property Services Centre (IPSC) of The Hong Kong
Productivity Council (HKPC). Makita Power Tools (HK) Ltd. reserves the right to take legal action for any infringement
of the above trademarks, including manufacturing, wholesaling or selling either the power tools or accessories
printed with the above trademarks without getting permission of Makita Power Tools(HK) Ltd.
www.makita.com.hk
MH-201302-04-EN
MH-2-07-EN
Download PDF
Similar pages