high-speed cost effective coax cable

F-218 (Rev 10OCT17)
FCF8–20–01–L–03.00–S
FCF8–10–01–L–03.00–S
FCS8–10–01–L–S–A–TR
FCS8–20–01–L–S–A–TR
(0.80 mm) .0315"
FCF8, FCS8 SERIES
HIGH-SPEED COST EFFECTIVE COAX CABLE
SPECIFICATIONS
NO. OF
POSITIONS
FCF8
For complete specifications see
www.samtec.com?FCF8
Cable: 38 AWG coax
Overmold: Nylon
Terminal Material:
Phosphor Bronze
Contact Plating:
Au or Sn over 50 µ" (1.27 µm) Ni
Operating Temp Range:
-25 °C to +105 °C
Current Rating:
1.8 A per pin
(1 pin powered)
RoHS Compliant: Yes
Mates with:
FCS8
CABLE
LENGTH
PLATING
OPTION
01
–L
–10, –20, –30
–“XX.XX”
= 10 µ" (0.25 µm)
Gold on contact,
Matte Tin on tail
= Length in Inches
03.00" (76.2 mm) minimum
CABLE LENGTH + (16.43) .647
NO. OF
POSITIONS
RECOGNITIONS
GND
GND
A
FILE NO. E111594
(19.85) (27.00)
.781
1.063
–30
(27.85) (35.00)
1.096 1.378
(MOV Required)
(12.55) .494
• Other sizes and lengths
Contact Samtec.
(2.42)
.095
SPECIFICATIONS
NO. OF
POSITIONS
FCS8
For complete specifications and
recommended PCB layouts see
www.samtec.com?FCS8
Insulator Material: Black LCP
Contact Material: BeCu
Contact Plating:
Au or Sn over 50 µ" (1.27 µm) Ni
Shield:
Nickel Plated Phosphor Bronze
Operating Temp Range:
-55 °C to +125 °C
Current Rating: 1.8 A per pin
(1 pin powered)
RoHS Compliant: Yes
Mates with:
FCF8
(0.80)
.0315
PLATING
OPTION
01
–L
–10, –20, –30
A
(7.46)
.294
(0.30)
.012
S
= 10 µ" (0.25 µm) Gold on contact,
Matte Tin on tail
A
TR
–TR
= Tape & Reel
NO. OF
A
B
C
D
POSITIONS
(16.59) .653 (15.56) .613 (10.70) .421 (13.06) .514
–10
(24.59) .968 (23.56) .928 (18.70) .736 (21.06) .829
–20
(32.59) 1.283 (31.56) 1.243 (26.70) 1.051 (29.06) 1.144
–30
(7.48)
.294
B
•Weld tabs
•Positive latching
RECOGNITIONS
FILE NO. E111594
–20
ALSO
AVAILABLE
Some lengths, styles and
options are non-standard,
non-returnable.
For complete scope
of recognitions see
www.samtec.com/quality
–10
GND
Cable lengths longer than
40.00" (1 meter) are not
supported with S.I. test data.
PROCESSING
B
N
01
GND
Notes:
Design your High-Speed Cable
with Samtec’s High-Speed
Cable Solutionator®
at www.samtec.com/hdr
B
A
(11.85) (19.00)
.467
.748
01
N
For complete scope
of recognitions see
www.samtec.com/quality
Lead–Free Solderable: Yes
SMT Lead Coplanarity:
(0.15 mm) .006" max*
*(.004" stencil solution
may be available; contact
IPG@samtec.com)
S
•Shielded for EMI
protection
C
D
(0.49)
.019
(1.85)
.073
(0.20)
.008
(1.32)
.052
DIA
Note: Some lengths,
styles and options are
non-standard, non-returnable.
Due to technical progress, all designs, specifications and components are subject to change without notice.
WWW.SAMTEC.COM
All parts within this catalog are built to Samtec’s specifications.
Customer specific requirements must be approved by Samtec and identified in a Samtec customer-specific drawing to apply.
Download PDF
Similar pages