ICG
GRIP LOCK® SINGLE LOOP CABLE TIES !
NATURAL NYLON CABLE TIES
Miniature Ties
Overall
Max.
Length
Bundle
4"
13/16"
6"
1-3/8"
8"
2"
Intermediate Ties
Overall
Max.
Length
Bundle
5”
1-1/4”
6"
1-3/8"
8"
2"
11.5”
3”
14.5”
4”
Standard Ties
Overall
Max.
Length
Bundle
7"
1-3/4"
7.5”
1-3/4”
8"
2"
8”
2”
9"
2-3/8"
11"
3"
11"
3"
14"
4"
14"
4"
17”
5”
21”
6"
Heavy Duty Ties
Overall
Max.
Length
Bundle
Min.
Tensile
Part No.
Tie
Width
18#
18#
18#
NCT 040
NCT 06L
NCT 08L
.092
.092
.092
Min.
Tensile
Part No.
Tie
Width
.033
.122
.170
.033
.122
.170
.033
.122
.170
30# and 40# Tensile Strengths
Tie
Head
Head
Thickness Height
Length
40#
30#
30#
40#
40#
NCT 050
NCT 060
NCT 080
NCT 120
NCT 150
.135
.128
.128
.135
.135
.050
.041
.041
.050
.050
Min.
Tensile
Part No.
Tie
Width
50#
50#
50#
75#
50#
50#
75#
50#
75#
50#
50#
NCT 070
NCT 075
NCT 081
NCT 081-75
NCT 090
NCT 110
NCT 110-75
NCT 140
NCT 140-75
NCT-170
NCT 210
Min.
Tensile
Part No.
8.5"
2"
120#
14.5"
4"
120#
18.5"
5"
120#
21.5"
6"
120#
24.5"
7"
120#
28"
8”
120#
Extra Heavy Duty Ties
Overall
Max.
Min.
Length
Bundle
Tensile
NCT 085
NCT 145
NCT 185
NCT 215
NCT 245
NCT 285
8.5"
2"
175#
12.5”
3”
175#
14.5"
4"
175#
18.5"
5"
175#
21.5"
6"
175#
24.5"
7"
175#
32"
10"
175#
36"
11"
175#
41”
12”
175#
45.5"
14"
175#
48”
15”
175#
Super Heavy Duty Cable Ties
Overall
Max.
Min.
Length
Bundle
Tensile
NCT 085
NCT 125
NCT 145
NCT 185
NCT 215
NCT 245
NCT 320
NCT 360
NCT 410
NCT 460
NCT 480
14-7/8"
21-5/8"
28-3/8"
34-1/2”
40-3/8”
NCT 148
NCT 218
NCT 288
NCT 348
NCT 408
4"
6"
8"
10”
12"
18# Tensile Strength
Tie
Head
Head
Tip
Thickness Height
Length
Length
250#
250#
250#
250#
250#
Part No.
Part No.
.170
.170
.170
.170
.170
.170
.170
.170
.170
.170
.170
Tie
Width
.830
.830
.830
MS3367-4-*
N/A
N/A
Tip
Length
MS Part
Number
.140
.213
.830
MS3367-5-*
.140
.213
.830
MS3367-5-*
.140
.213
.830
N/A
.140
.213
.830
N/A
.140
.213
.830
N/A
50# & 75# (Double Locking) Tensile Strengths
Tie
Head
Head
Tip
MS Part
Thickness Height
Length
Length
Number
.045
.208
.045
.208
.045
.208
.045
.208
.045
.208
.045
.208
.045
.208
.045
.208
.045
.208
.045
.208
.045
.208
120# Tensile Strength
Tie
Head
Thickness Height
.292
.074
.292
.074
.292
.074
.292
.074
.292
.074
.292
.074
175# Tensile Strength
Tie
Tie
Width
Thickness
.272
.272
.272
.272
.272
.272
.272
.272
.272
.272
.272
.830
.830
.830
.830
.830
.830
.830
.830
.830
.830
.830
MS3367-1-*100
MS3367-1-*100
MS3367-1-*100
N/A
N/A
MS3367-7-*100
N/A
MS3367-2-*100
N/A
N/A
N/A
Head
Length
Tip
Length
MS Part
Number
.324
.324
.324
.324
.324
.324
.370
.370
.370
.370
.370
.370
1.130
1.130
1.130
1.130
1.130
1.130
N/A
MS3367-3-*
N/A
N/A
MS3367-6-*
MS3367-6-*
Head
Height
Head
Length
Tip
Length
MS Part
Number
.370
.370
.370
.370
.370
.370
.435
.435
.435
.435
.435
1.130
1.130
1.130
1.130
1.130
1.130
1.250
1.250
1.250
1.250
1.250
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
Head
Length
Tip
Length
MS Part
Number
.435
.435
.435
.435
.435
1.250
1.250
1.250
1.250
1.250
N/A
N/A
N/A
N/A
N/A
.292
.074
.324
.292
.074
.324
.292
.074
.324
.292
.074
.324
.292
.074
.324
.292
.074
.324
.345
.086
.332
.345
.086
.332
.345
.086
.332
.345
.086
.332
.345
.086
.332
250# Tensile Strength, 1/2" Wide
Tie
Tie
Head
Width
Thickness Height
.500
.500
.500
.500
.500
MS Part
Number
.083
.083
.083
.083
.083
.350
.350
.350
.350
.350
Package Qty.
Std.
Bulk
100
100
100
1000
1000
1000
Package Qty.
Std.
Bulk
100
100
100
100
100
1000
1000
1000
1000
1000
Package Qty.
Std.
Bulk
1000
1000
1000
100
100
1000
100
1000
100
100
100
10,000
10,000
10,000
1000
1000
5,000
1000
5,000
1000
-----
Pkg. Qty.
Std.
Case
Qty
25,000
10,000
10,000
Case
Qty
20,000
10,000
10,000
10,000
10,000
Case
Qty
10,000
10,000
5,000
5,000
10,000
5,000
Case
Qty
100
100
50
50
50
100
4,000
2,000
1,000
1,000
1,000
1,500
Pkg. Qty.
Std.
Case
Qty
100
100
100
50
50
50
50
100
50
100
50
4,000
2,000
2,000
1,000
1,000
1,000
1,000
1,000
500
1,000
500
Package Qty.
Std.
Bulk
100
100
100
50
50
-----------
Case
Qty
2,000
1,500
1,500
500
500
ICG Corporation 2020-124th Ave NE Bellevue, WA 98005 Phone 425.867.1761 Fax 425.881.8982 e-mail: sales@icgcorporation.com www.icgcorporation.com
ICG
GRIP LOCK SINGLE LOOP CABLE TIES "
UV STABILIZED BLACK NYLON CABLE TIES
Miniature Ties
Overall
Max.
Length
Bundle
4"
13/16"
6"
1-3/8"
8"
2"
Intermediate Ties
Overall
Max.
Length
Bundle
5”
1-1/4”
6"
1-3/8"
8"
2"
11.5”
3”
14.5”
4”
Standard Ties
Overall
Max.
Length
Bundle
7"
1-3/4"
7.5”
1-3/4”
8"
2"
8"
2"
9"
2-3/8"
11"
3"
11"
3"
14"
4"
14"
4"
17”
5”
21”
6”
Heavy Duty Ties
Overall
Max.
Length
Bundle
Min.
Tensile
Part No.
Tie
Width
18#
18#
18#
BCT 040
BCT 06L
BCT 08L
.092
.092
.092
Min.
Tensile
Part No.
Tie
Width
.033
.122
.170
.830
.033
.122
.170
.830
.033
.122
.170
.830
30# and 40# Tensile Strengths
Tie
Head
Head
Tip
Thickness Height
Length
Length
40#
30#
30#
40#
40#
BCT 050
BCT 060
BCT 080
BCT 120
BCT 150
.135
.128
.128
.135
.135
.050
.041
.041
.050
.050
Min.
Tensile
Part No.
Tie
Width
50#
50#
50#
75#
50#
50#
75#
50#
75#
50#
50#
BCT 070
BCT 075
BCT 081
BCT 081-75
BCT 090
BCT 110
BCT 110-75
BCT 140
BCT 140-75
BCT-170
BCT-215
Min.
Tensile
Part No.
Tie
Width
BCT 085
BCT 145
BCT 185
BCT 215
BCT 245
BCT 285
.292
.292
.292
.292
.292
.292
Part No.
Tie
Width
8.5"
2"
120#
14.5"
4"
120#
18.5"
5"
120#
21.5
6"
120#
24.5"
7"
120#
28"
8
120#
Extra Heavy Duty Ties
Overall
Max.
Min.
Length
Bundle
Tensile
.170
.170
.170
.170
.170
.170
.170
.170
.170
.170
.170
8.5"
2"
175#
BCT 085
12.5”
3”
175#
BCT 125
14.5"
4"
175#
BCT 145
18.5"
5"
175#
BCT 185
21.5"
6"
175#
BCT 215
24.5"
7"
175#
BCT 245
32"
9"
175#
BCT 320
36"
11"
175#
BCT 360
41”
12”
175#
BCT 410
45.5"
14"
175#
BCT 460
48”
15”
175#
BCT 480
Super Heavy Duty Lashing Ties
Overall
Max.
Min.
Length
Bundle
Tensile
Part No.
.292
.292
.292
.292
.292
.292
.345
.345
.345
.345
.345
14-7/8"
21-5/8"
28-3/8"
34-1/2"
40-3/8"
4"
6"
8"
10"
12"
18# Tensile Strength
Tie
Head
Head
Tip
Thickness Height
Length
Length
250#
250#
250#
250#
250#
BCT 148
BCT 188
BCT 218
BCT 348
BCT 408
MS Part
Number
MS3367-4-0
N/A
N/A
MS Part
Number
Package Qty.
Std.
Bulk
100
100
100
1000
1000
1000
Package Qty.
Std.
Bulk
.140
.213
.830
MS3367-5-0
100
1000
.140
.213
.830
MS3367-5-0
100
1000
.140
.213
.830
N/A
100
1000
.140
.213
.830
N/A
100
1000
.140
.213
.830
N/A
100
1000
50# & 75# (Double Locking) Tensile Strengths
Tie
Head
Head
Tip
MS Part
Package Qty.
Thickness Height
Length
Length
Number
Std.
Bulk
.045
.208
.272
.-45
.208
.272
.045
.208
.272
.045
.208
.272
.045
.208
.272
.045
.208
.272
.045
.208
.272
.045
.208
.272
.045
.208
.272
.045
.208
.272
.045
.208
.272
120# Tensile Strength
Tie
Head
Head
Thickness Height
Length
.830
.830
.830
.830
.830
.830
.830
.830
.830
.830
.830
MS3367-1-0
MS3367-1-0
MS3367-1-0
N/A
N/A
MS3367-7-0
N/A
MS3367-2-0
N/A
N/A
N/A
Tip
Length
MS Part
Number
.074
.324
.370
.074
.324
.370
.074
.324
.370
.074
.324
.370
.074
.324
.370
.074
.324
.370
175# Tensile Strength
Tie
Head
Head
Thickness Height
Length
1.130
1.130
1.130
1.130
1.130
1.130
N/A
MS3367-3-0
N/A
N/A
MS3367-6-0
MS3367-6-0
Tip
Length
MS Part
Number
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
Tie
Width
.074
.324
.370
1.130
.074
.324
.370
1.130
.074
.324
.370
1.130
.074
.324
.370
1.130
.074
.324
.370
1.130
.074
.324
.370
1.130
.086
.332
.435
1.250
.086
.332
.435
1.250
.086
.332
.435
1.250
.086
.332
.435
1.250
.086
.332
.435
1.250
250# Tensile Strength, 1/2" Wide
Tie
Head
Head
Tip
Thickness Height
Length
Length
.500
.500
.500
.500
.500
.083
.083
.083
.083
.083
N/A
N/A
N/A
N/A
N/A
.350
.350
.350
.350
.350
.435
.435
.435
.435
.435
1.250
1.250
1.250
1.250
1.250
MS Part
Number
100
100
100
100
100
100
100
100
100
100
100
1000
1000
1000
1000
1000
1000
1000
1000
1000
-----
Case
Qty
25,000
10,000
10,000
Case
Qty
20,000
10,000
10,000
10,000
10,000
Case
Qty
10,000
10,000
10,000
10,000
10,000
5,000
5,000
5,000
5,000
10,000
5,000
Pkg. Qty.
Std.
Case
Qty
100
100
50
50
50
100
4,000
2,000
1,000
1,000
1,000
1,500
Pkg. Qty.
Std.
Case
Qty
100
100
100
50
50
50
50
100
50
100
50
4,000
2,000
2,000
1,000
1,000
1,000
1,000
1,000
500
1,000
500
Pkg. Qty.
Std.
Bulk
25
25
25
25
25
100
100
100
100
100
Case
Qty
1,500
1,500
1,500
500
500
ICG Corporation 2020-124th Ave NE Bellevue, WA 98005 Phone 425.867.1761 Fax 425.881.8982 e-mail: sales@icgcorpooation.com www.icgcorporation.com
Colored Ties, Releasables, Kits, Tools
ICG
2020-124th Ave. NE Bellevue, WA 98005 425.867.1761 fax 425.881.8982
e-mail: sales@icgcorporation.com www.icgcorporation.com
# RELEASABLE CABLE TIES - REUSABLE
Nominal Max. Tensile
Pkg.
Length Bundle Strength Qty.
Natural Nylon UV Black
Part Number Part Number
7"
9"
11"
14"
RNCT-070
RNCT-090
RNCT-110
RNCT-140
1-3/4"
2-1/2"
3"
4"
50#
50#
50#
50#
100
100
100
100
RBCT - 070
RBCT - 090
RBCT - 110
RBCT - 140
# CABLE TIE INSTALLATION TOOLS - Heavy Duty
Tool # For Tie Lengths Fits These Tensile Strength Ties:
T-1
4" thru 17"
18# thru 75#
(Mini - Int - Standard)
T-2
8.5" thru 48"
120# thru 175# (Heavy Duty Ties)
T-3
4” thru 17“
18# thru 75#
Economy Tool
# TIE - PAKS: CABLE TIE ASSORTMENTS
Part No. PAK-1-N
Part No. PAK-1-B
# NEON COLOR CABLE TIES 5 Neon Colors
Nominal Max. Tensile Pkg.
Length Bundle Strength Qty.
Part Number
Colors
4"
6”
8"
11"
14”
CCTN - 041-*
CCTN - 061-*
CCTN - 081-*
CCTN - 111-*
CCTN - 141-*
SEE
COLOR
CODES
BELOW
13/16"
1-3/8”
2"
3"
4”
18#
30#
50#
50#
50#
100
100
100
100
100
Part No. PAK-2-N
Part No. PAK-2-B
* NEON COLORS: FBEC-Neon Blue, FYWC-Neon Yellow, FGNC-Neon Green,
FPKC-Neon Pink, FOEC-Neon Orange.
# STANDARD COLOR CABLE TIES
Nominal
Length
4"
6”
8"
11"
14”
Max.
Bundle
13/16"
1-3/8”
2"
3"
4”
Tensile
Strength
18#
30#
50#
50#
50#
Pkg.
Qty.
100
100
100
100
100
16 COLORS
Part Number
CTC - 040 -*
CTC - 060 -*
CTC - 081 -*
CTC - 111 -*
CTC - 141 -*
Color
SEE
COLOR
CODES
BELOW
Available COLORS: Std. Blue (BLU), Royal Blue (ROY), Std. Green (GRN), Kelly
Green (KEL), Aquamarine (AQUA), Teal (TEAL), Gray (GRY), Orange (ORG), Red
(RED), Burgundy (BURG), Yellow (YEL), Pink (PNK), Silver (SLVR), Gold (GOLD),
Purple (PPL) and Glow in the Dark (GLOW)
# NEON TIE- PAKS:
NEON TIE ASSORTMENTS
Part No. PAK-4-FL
20 pcs. each color: (100 pieces total)
4" NEON MINI
TIE ASSORTMENT PACK
4"
Part No. PAK-6-FL
20 pcs. each color: (100 pieces total)
6" NEON INTERMEDIATE
TIE ASSORTMENT PACK
Part No. PAK-8-FL
6" 30# Neon Blue, Orange, Pink,
Yellow and Green Ties
20 pcs. each color: (100 pieces total)
8" NEON STANDARD
TIE ASSORTMENT PACK
Part No. PAK-11-FL
8" 50# Neon Blue, Orange, Pink,
Yellow and Green Ties
20 pcs. each color: (100 pieces total)
11" NEON STANDARD
TIE ASSORTMENT PACK
Part No. PAK-14-FL
11" 50# Neon Blue, Orange, Pink,
Yellow and Green Ties
20 pcs. each color: (100 pieces total)
14" NEON STANDARD
TIE ASSORTMENT PACK
14" 50# Neon Blue, Orange, Pink,
Yellow and Green Ties
Part No. PAK-3-N
Grip Lock Nylon Cable Ties
(300 pieces total)
Natural Ties
Natural Ties
Natural Ties
(300 pieces total)
UV Black Ties
UV Black Ties
UV Black Ties
100 of each:
7"
50#
11"
50#
100 of each:
7"
50#
11"
50#
(200 pieces total)
Natural Ties
Natural Ties
(200 pieces total)
UV Black Ties
UV Black Ties
100 of each: (200 pieces total)
4"
8"
Part No. PAK-3-B
18# Natural Ties
30# Natural Ties
100 of each: (200 pieces total)
4"
8"
Part No. PAK-4-N
18# UV Black Ties
30# UV Black Ties
Natural Nylon, 275 pieces total
100 pcs.
4"
18#
100 pcs.
6"
30#
50 pcs.
9"
50#
25 pcs. 14.5" 120#
Part No. PAK-4-B
Part No. PAK-7-COLOR
Brown
Pink
Silver
Light Duty Ties
Intermediate Ties
Standard Ties
Heavy Duty Ties
UV Black Nylon, 275 Pieces Total
100 pcs.
4"
18#
100 pcs.
6"
30#
50 pcs.
9"
50#
25 pcs. 14.5" 120#
18# Neon Blue, Orange, Pink
Green & Yellow ties
-3-
100 of each:
4"
18#
8"
30#
11"
50#
100 of each:
4"
18#
8"
30#
11"
50#
Orange
Gold
Yellow
Light Duty Ties
Intermediate Ties
Standard Ties
Heavy Duty Ties
8”, 50# Standard Cable Ties
10 of each color: (100 pieces total)
Purple
Red
Green
Blue
(order in multiples of 10)
PART NUMBER PAK-4-COLOR
(order in multiples of 10 )
SAME COLORS AS ABOVE IN 4” 18# MINIATURE TIES
PART NUMBER PAK-11-COLOR
(order in multiples of 10)
SAME COLORS AS ABOVE IN 11” 50# STANDARD TIES
CUSTOM ASSORTMENT PACKAGES ALSO AVAILABLE
Other colors available - please inquire for details
Other nylon hardware is available in colors as well
ICG Corporation
2020-124th Ave. NE
Bellevue, WA 98005
Cable Ties: Screw Mount, Push Mount, Double Loop Styles
phone 425.867.1761
fax 425.881.8982
e-mail sales@ icgcorporation.com
MNCT / MBCT Series (Screw Mounting) and PMNCT / PMBCT Series
(Push-to-Mount) cable ties provide one-piece bundling and mounting; they are
injection molded for maximum strength. Positive-locking teeth are closely
spaced for easy adjustment and control of bundle tightness.
MNCT / MBCT and PMNCT / PMBCT Series cable ties are available in a wide
variety of lengths and cross-sections to secure all sizes of bundles. Extra
features like the bent-tip design with gripping ridges mean faster and easier
installation; smooth rounded edges won't cut hands or insulation. Tools are not
required for installation, but are suggested for controlled, uniform tension and
cut-off applications.
MNCT / MBCT Series Mounting Cable Ties have a molded-in screw hole for
bundling and mounting with the same part. These ties can be used in place of a
mounting base with separate tie for many installations. They mount with
standard screws or rivets (up to 1/4” screw size - see table below for
applications) on virtually any surface that has or can accept a drilled hole in
almost any position or orientation. Durable construction and one-piece locking
head assure a lasting, secure hold. Available in several models from 18#
through 175# tensile strength ratings. Lengths vary from 5-1/2" to 29" for
bundles from 1/16" to 8" diameters.
Heavy Duty MNCT / MBCT Series Mounting Cable Ties are extra strong for
one-part bundling and mounting operations. The strong mounting head will
stand up to the most rugged applications and hold securely. MNCT / MBCT
Series ties mount with standard rivets or screws, up to 1/4". These are
available in three models in lengths from 15" to 29" to accommodate 3/16" to 8"
bundle diameters. These ties have a heavy-duty cross-section and a straight tip
for easy insertion around large bundles.
PMNCT / PMBCT Series Push-Mount Ties snap quickly into a 1/4" hole to
provide one-piece mounting and bundling. The push-mount head is ideal for
mounting on panels or chassis. Centering ears and locking barbs hold securely
and spring arm thickness compensators tighten in panel / chassis up to 1/8"
thick. Bundling can be done either before or after mounting.
DLNCT Series Double Loop Cable Ties are made for a wide variety of dual
holding applications. The double loop ties are one-piece injection-molded for
maximum strength and are adjustable to manage bundles of most sizes.
Special features include bent-tip design for insertion ease, and rounded edges
for safe handling. The double loop tie is designed with a two-way reverse pawl
and head. It wraps first around one bundle and locks like a single loop tie, and
then can make a second locking loop into a figure eight configuration. DLNCT
ties can secure one bundle to another bundle, conduit, pipe or any other
structure. They can also tie one bundle securely, and be left untrimmed for easy
addition of another bundle at a later time. The head acts as a spacer between
bundles. DLNCT ties are available in three 50# tensile strength models in
lengths from 7-3/4” to 14-3/4”; they will accommodate from 1-1/2” to 4”
combined total maximum bundle diameters. Minimum bundle diameters are
1/16” for the first bundle, and 1/8" for the second.
www.icgcorporation.com
Screw Mount Tie ⇑
Push Mount Tie ⇑
Natural Nylon
Part Number
UV Black
Part Number
Tensile
Strength
Max.
Bundle Dia.
Tie
Length
MNCT-055
MNCT-065
MNCT-070
MNCT-090
MNCT-110
MNCT-140
MNCT-145
MNCT-215
MNCT-285
PMNCT-070
PMNCT-110
PMNCT-140
DLNCT-070
DLNCT-110
DLNCT-140
MBCT-055
MBCT-065
MBCT-070
MBCT-090
MBCT-110
MBCT-140
MBCT-145
MBCT-215
MBCT-285
PMBCT-070
PMBCT-110
PMBCT-140
DLBCT-070
DLBCT-110
DLBCT-140
30 #
40 #
50 #
50 #
50 #
50 #
120 #
120 #
120 #
50 #
50 #
50 #
50#
50#
50#
1.0”
2.0”
1.75”
2.37”
3.0”
4.0”
4.0”
6.0”
8.0”
1-3/4”
3.0”
4.0”
1.75”
3.0”
4.0”
5.5”
6.5”
8.0”
10.0”
12.0”
15.0”
15.0”
22.0”
29.0”
8.0”
12.0”
15.0”
7.75”
11.75”
14.75”
Double Loop Tie ⇑
Tie
Tie
Width
Thickness
.115
.135
.190
.190
.190
.190
.310
.310
.310
.190
.190
.190
.187
.187
.187
.045
.050
.055
.055
.055
.055
.083
.083
.083
.055
.055
.055
.055
.055
.055
Use Screw
Size
# 4
# 6-8
# 10
# 10
# 10
# 10
1/4”
1/4”
1/4”
1/4” Hole
1/4” Hole
1/4” Hole
N/A
N/A
N/A
ICG Corporation
2020-124th Ave. NE
Bellevue, WA 98005
phone 425.867.1761
Mounting Bases & Cradles
fax 425.881.8982
e-mail sales@ icgcorporation.com
www.icgcorporation.com
ICG mounting bases, used with cable ties, provide an easy, durable method for routing and securing wire bundles or cables. Our styles of mounts include adhesivebacked, screw-mount, and push-mount types; these cover all sizes of regular and beaded ties for light as well as heavy-duty applications. All mounting bases are one-piece
injection-molded and have radiused edges for wire protection and safe handling. They exceed the breaking strength of the ties used in them when properly anchored.
Adhesive backed bases will hold under continuous temperatures up to 125°F (52°C). The continuous straight-pull rated load of rubber-based adhesives is .50 Ibs. per
square inch of adhesive. Adhesive-backed bases are not recommended for outdoor use (without fasteners), for concrete or other irregular surfaces. Virtually all mounts
are available in natural and UV Black nylon.
Our AMP-075 Adhesive-Backed Mounting Base (3/4 x 3/4) is a
"mini" mount especially for use where mounting space and height
are limited. The AMP-075 is available with or without a screw hole
mount. The mini-mount has a four-way entry and accepts 18# - 75#
ties. Our AMP-001 Adhesive-Backed Mounting Base has fourway entry and features easy installation, as there are two
possibilities for correct orientation to the wire bundle. The AMP-001,
1” x 1”, has a saddle design for added support of wire bundles or
components. When used with a screw or rivet for extra holding
strength, the countersunk hole does not interfere with insertion of or
cause damage to the tie. Please specify whether you wish single
(center) or two hole (opposite corner, shown) design. The low-profile
height allows use in vertically tight areas. The AMP-001 is not
recommended for outdoor applications unless also secured with
screws or rivets. Our heavy duty adhesive backed mount pad, model
AMP-150 (1-1/2” x 1-1/2”, not shown) has a 4 way entry and accepts
heavy duty 5/16”-3/8” wide (120#-175#) ties. AMP-200 also has 4
way entry and accepts ties up to ½” (250#) in width.
Model BTMP-075 Adhesive-Backed Mounting Base has four-way
entry with rounded openings to accept all sizes of beaded cable ties.
It also accepts regular cable ties from 18# through 40# tensile
strengths. There is a hole for a No. 6 screw in two of the four
corners for added holding strength The holes are out of the path of
the tie, so the screw head will not impede insertion or damage the
tie. The BTMP-075 is not recommended for outdoor use without
fasteners.
Low profile 4-way mounts SMP-180 and SMP-220 attach with a
single screw and provide multi-position mounting in a low profile
design.
AMP-001
SMP – 10
SMP-001-2
SMP-001-4
Model SMP-001-2 and -4 Screw Mount Bases have two-way and four-way
entry, respectively. Both models have a saddle design for added bundle
support The countersunk hole insures that the screw or rivet does not interfere
with tie insertion or damage the tie. These mounts have a low-profile height for
use where height is limited. These mounts accept 75# and smaller ties.
Models SMP-10, SMP-25, and SMP-68 Screw Mounting Bases feature twoway entry, and a deep cradle design to provide extra support for large bundles
and many components. Narrower and higher than the other screw mounts,
they are especially useful in crowded surface areas. They are structurally
designed to exceed maximum cable tie installation tension. Models SMP-10
and SMP-25 have 5/8" x 7/8" rectangular bases and accept all cross-sections
of ties, from 18# through 175# tensile strengths. Model SMP-68 has a 3/8" x
5/8" base, and accepts 75# and smaller ties. Model SMP-10 has a No. 10
hole and accepts 18# through 120# ties. SMP-25 has a 1/4" hole and accepts
18# through 175 # heavy duty ties. SMP-68 has a #8 hole and accepts 18#
through 75# ties.
Model CTST Screw Tab Mounts are designed for installation where space is
limited. CTST-001 Screw Tab Mounts are 1/8” in height, 1/2” wide by 3/4” in
length and can be fastened to applications with a #8 screw. Model CTST-002
is approximately 3/16” in height, 9/16” wide by 7/8” in length and can be
fastened with a 1/4” screw.
Model PM-1 Push-Mount Base installs by snapping easily into any standard
1/4" hole. Centering ears and locking barb design hold it securely in place.
Heavy-duty spring arm compensators accommodate chassis / panel thickness
up to 7/64" and hold securely. The push-mount base has a small head for
crowded surface areas and uses 75# and smaller cross-section ties. Please
note that all styles of screw in and push in mounts are available in black as
well as a limited number of colors.
CTST-001
ABMP-075
PM-1
AMP-150
AMP-200
SMP-180
PART
NUMBER
BASE
DIMENSIONS
BASE
THICKNESS
SCREW
HOLE SIZE
FOR WIRE TIE TYPES &
TENSILE STRENGTHS
CTST-001
CTST-002
1/2” X 3/4”
9/16” X 7/8”
.125
.187
1 EA #8
1 EA. 1/4”
18# - 75# (Mini-Std.)
18# - 75# (Mini-Std.)
BTMP-075
AMP-200
AMP-200-UV
AMP-150
AMP-150-UV
AMP-001
AMP-001-UV
AMP-075
AMP-075-UV
SMP-001(4 WAY)
SMP-001(2 WAY)
SMP-001-UV (BLACK)
SMP-10
SMP-25
SMP-68
SMP-180
SMP-220
PM-1
.75 X .75
2X2
2X2
1.5 X 1.5
1.5 X 1.5
1.1 X 1.1
1.1 X 1.1
.75 X .75
.75 X .75
1.1 X 1.1
1.1 X 1.1
1.1 X 1.1
.625 X .875
.625 X .875
.375 X .625
.920 X .420
.950 X .500
.312 X .562
.312
.440
.440
.312
.312
.312
.312
.187
.187
.250
.250
.250
.375
.375
.250
.150
.230
.688
2 EA # 8
5 EA ¼”
5 EA ¼”
4 EA ¼”
4 EA ¼”
1 or 2 EA # 8
1 or 2 EA. #8
NONE or 2
NONE or 2
1 EA # 8
1 EA # 8
1 EA. #8
1 EA. # 10
1 EA 1/4”
1 EA # 8
1 EA. #6 OR #8
1 EA. #6 OR #8
1 EA 1/4”
40# - 75 # Beaded Ties
18# - 250# (Mini-Hvy)
18# - 250# (Mini-Hvy)
18# - 175# (Mini-Hvy)
18# - 175# (Mini-Hvy)
18# - 75# (Mini-Std.)
18# - 75# (Mini-Std.)
18# - 40# (Mini-Int.)
18# - 40# (Mini-Int.)
18# - 75# (Mini-Std.)
18# - 75# (Mini-Std.)
18# - 75# (Mini-Std.)
18# - 175# (Mini-Hvy)
18# - 175# (Mini-Hvy)
18# - 75# (Mini-Std.)
18# - 75# (Mini-Std.)
18# - 75# (Mini-Std.)
18# - 75# (Mini-Std.)
ICG Corporation
2020-124th Ave. NE
Bellevue, WA 98005
Beaded Ties * Marker Ties * I.D. Plates * Connector Rings * Cable Spacers
phone 425.867.1761
fax 425.881.8982
Beaded Releasbale Cable Tie
NBCT Series Beaded Cable Ties provide an easy method of securing bundles
under conditions where bundling requirements may change. The positivelocking key head secures quickly to bundle wires tightly, and releases easily to
add wires or re-route. Beaded cable ties are very useful for applications like
temporary routing or route planning; they are also commonly used for tagging
operations such as color coding, or attaching ID plates. They may be used to
tag bundles already secured by standard ties; beaded cable ties can be cut to
any length without affecting their use.
Standard NBCT Series Beaded Cable Ties are offered in Type 6/6 Natural
Nylon. and UV Stabilized Black Nylon; colors and low-density polyethylene are
available on a special order basis. Polyethylene is a soft, flexible material that
retains its flexibility in a wider range of environmental conditions than Nylon,
which has greater strength. Beads are spaced from 1/8" to 1/4" apart for secure
wrapping of bundles without hampering tie flexibility; the smooth round beads
will not abrade insulation. Beaded cable ties are available in seven sizes to
accommodate bundle diameters from 7/8" to 5" maximum. Bead diameters
range from 3/32" to 1/8"; tensile strengths range from 40# to 75#.
BEADED TIE
PART NUMBER
MIN.
MAX.
TENSILE BUNDLE
TIE
LENGTH
BEAD
SIZE
NBCT-04N
NBCT-05N
NBCT-06N
NBCT-08N
NBCT-10N
NBCT-14N
NBCT-18N
40#
40#
75#
75#
75#
75#
75#
4-1/4”
5”
6-3/4”
9”
11”
15”
18”
3/32”
3/32”
1/8”
1/8”
1/8”
1/8”
1/8”
“I.D” or Marker Cable Ties
1-1/8”
1-3/8”
1-7/8”
2-1/2”
3”
4”
5”
Miniature Series Marker Tie
NIDT Series Identification Cable Ties (50# Tensile Strength) are for bundles
from 3/8” to 4” diameters. The integral ID plate is inside the head and runs
perpendicular to the bundle for good visibility. Plates are 1/2 x 1-3/16 in the
NIDT-070 model and 1/2 x 2-1/4 in NIDT-110 and -140. All have a matte
surface on the exposed side. One-piece injection-molded construction
combines bundle identification and fastening in one cable tie without sacrificing
holding strength. Available in four sizes to fit a variety of bundling applications, a
matte finished surface provides space for writing and labeling. These styles are
also known as “marker” or “flag” ties.
Miniature I.D. ties (18# tensile strength) are for bundle diameters from 1/4 to
3/4. On the ”I“ Series Tie, the integral ID plate is molded inside the head.
Because the ID plate runs parallel to the bundle, these ties can hold smaller
bundles than ties with in-line plates. Plate size is 5/16 x 1 with the matte writing
surface on the exposed side.
PART
TENSILE MAX.
TIE
TIE
MS PART
NUMBER STRENGTH BUNDLE LENGTH WIDTH
NUMBER
NIDT-040
NIDT-070
NIDT-110
NIDT-140
18#
50#
50#
50#
3/4”
1-3/4”
3”
4”
3.75
7.50
11.50
14.50
.092
.187
.187
.187
MS 3368-5
MS 3368-1
N/A
MS 3368-2
e-mail sales@ icgcorporation.com
Identification Plate
www.icgcorporation.com
Connector Ring
Cable Spacer
Identification Plates NIDP-150 and NIDP-250 can prominently identify cable
bundles, or runs of tubing or pipe. A matte finish on both sides of the plate
absorbs ink or hot stamping for permanent, smudge-proof labeling. Round
holes in each corner of the plate provide mounting versatility and ease of use.
By running a cable tie through two corner holes, plates can be mounted in line
with or around the bundle. The holes accommodate 18# through 75# ties.
Durable Type 6/6 natural color nylon plates meet UL94V-2 flammability class
and are available in two sizes—3/4" by 1-1/2" and 3/4" by 2-1/2".
Model CCR-1 Cable Connector Ring connects cables or bundles using two
cable ties. Connector rings are also extremely useful for adding a new run to
existing bundles. Each ring has three entryways for cable ties, with the middle
entry perpendicular to the two outer entries. Connector rings are designed
primarily for joining bundles with a fixed 3/4" separation. The rings accepts
cable ties from 18# to 175# tensile strengths. Model CS-1 Cable Spacers
separate and connect bundles or cables, using one or more cable ties and are
recommended for use with parallel bundle configurations. They can also be
used to separate a bundle from a pipe, conduit or other member. They are used
by running a tie through one side of the spacer, around one bundle, through the
other side of the spacer, and around the other bundle or structure. The tie is
then tensioned to secure and separate two bundles with one operation. Each
spacer gives 1/2" bundle separation and can be stacked to give greater
separation.
PART
PART
NUMBER DIM.
NIDP-150
NIDP-250
CCR-1
CS-1
FOR USE WITH TIE
TENSILE STRENGTHS
1-1/2 X 3/4 X 1/32
2-1/2 X 3/4 X 1/32
5/8 X 5/8 X 3/4
2 X 1-1/8 X 3/4
BUNDLE
SPACING
18# - 75#
18# - 75#
18# - 175#
18# - 175#
N/A
N/A
3/4”
1/2”
Twist Lock Cable Tie
CTL Series Twist - Lock Bundling Ties offer a fast, economical way to
securely position and hold wire, cable or tubing. One twist of your finger locks
the bundle together; another twist will open the Twist - Lock tie to add wire to
or remove wire from the bundle. Reusable Twist - Lock bundling ties are made
of Type 6/6 nylon and are stocked in Natural (white) Nylon. UV Black and
colored Twist - Lock ties are available upon request and will be produced
where required on a custom order basis.
TWIST - LOCK
PART NUMBER
TIE
SIZE
MIN.
BUNDLE
MAX.
BUNDLE
OVERALL
HEIGHT
CTL - 012
CTL - 025
CTL - 037
CTL - 050
CTL - 062
CTL - 075
CTL - 094
1/8”
1/4”
3/8”
1/2”
5/8”
3/4”
15/16”
.110
.200
.300
.400
.550
.700
.900
.140
.270
.400
.500
.650
.800
1.000
.715
.875
1.100
1.200
1.260
1.550
1.870
Download PDF
Similar pages