Hands Free
Specifications
While you‘re listening to your music, you can control
your Bluetooth device with the below action on your
TIE ear phones.
Functions
Operation
Volume up
Short press “+”button
Volume down
Short press “–”button
Last song
Long press “+”button
Next song
Long press “–”button
Pause
Short press MFB once
Play
Short press MFB once
Model: All Round
Bluetooth version: CSR8635|V4.1+EDR
Bluetooth profiles: Headset, Hands free, A2DP, AVRCP
Operating distance: 10M
Talk time: 4-6 hours
Standby time: 150 hours
Charging time: about 1.5 hours
Charing Port: Micro USB
Charging
TIE comes with a built-in rechargeable battery, prior
to using it, it is recommended to charge the battery
fully for the first time.
1. Plug another side of cable to the USB port of PC or
into a USB power charger
- Red light on: Charging
- Red light off: Finish charging
2. It will take about 1.5 hours to finish charging
4
5
Multi-Function Buttons
Volume+/Previous song
Volume-/Next song
USB charging port
Microphone
Turning On | Off
Turning on: Press and hold MFB for 4 seconds
until blue LED flashes
Turning off: Press and hold MFB button about
4 seconds until red LED flashes
1
Hands Free
Connecting
Product Overview
Indicator light
USER MANUAL
Wireless Bluetooth Headphones
1) Keep your Bluetooth device within 1 meter when
pairing;
2) Make TIE enter pairing mode as shown:
Ensure TIE is off. Press and hold Multi-Function
Button for approximately 8 seconds until red and
blue LED flash rapidly;
3) Using your Bluetooth device, please scan/search
for available Bluetooth devices select “TIE” from
the list of devices shown;
4) If prompted, enter password or PIN No: “0000”
5) If prompted by your mobile phone to connect,
select “Yes”(this will vary among mobile phone
models)
6) After successful connecting, blue LED of headset
will flash twice every 4 seconds
Multi-pairing
TIE can connect with two Bluetooth cell phones at the
same time. The general pairing procedures are as
follows:
1) Pairing TIE with device A
2) Turn on TIE and make it enter pairing mode again,
and pairing it with device B
3) Operate device A to connect with headset. TIE has
already connected with two devices in this moment
2
TIE built-in microphone allows you to answer and
end calls. Please use the chart below to execute your
desired function.
Functions
Operation
Cancel a call
Short press MFB once
Answer a call
Short press MFB once
Reject a call
Long press MFB about 2
seconds until you hear a tone
End a call
Short press MFB once
Redial the last
number
Double click MFB
Call transfer
(headset to phone)
Press and hold MFB for 2
seconds
Call transfer
(phone to headset)
Press and hold MFB for 2
seconds
Microphone mute
Double click MFB
Cancel mute
Double click MFB
3
Download PDF
Similar pages