filename[I:\FM E_data\1011_DAVDZ1000_rev\2895978121\2895978121DAVDZ1000\Cover\01cov-cel.fm]
masterpage:Right
2-895-978-12(1)
DVD Home Theatre
System
Operating Instructions
DAV-DZ1000
©2007 Sony Corporation
model name [DAV-DZ1000]
[2-895-978-12(1)]
filename[I:\FM E_data\1011_DAVDZ1000_rev\2895978121\2895978121DAVDZ1000\gb02reg.fm]
masterpage:Left
specdef v20070110
Welcome!
WARNING
To reduce the risk of fire or electric
shock, do not expose this apparatus to
rain or moisture.
Caution – The use of optical instruments
with this product will increase eye
hazard.
Thank you for purchasing Sony DVD Home
Theatre System. Before operating this system,
please read this manual thoroughly and retain it
for future reference.
Do not install the appliance in a confined space, such
as a bookcase or built-in cabinet.
To prevent fire, do not cover the ventilation of the
apparatus with news papers, table-cloths, curtains, etc.
And don’t place lighted candles on the apparatus.
To prevent fire or shock hazard, do not place objects
filled with liquids, such as vases, on the apparatus.
Do not expose the battery to excessive heat such as
direct sunlight, fire, or the like.
In door use only.
Don’t throw away the battery with
general house waste, dispose of it
correctly as chemical waste.
This appliance is
classified as a CLASS 1
LASER product. This
marking is located on the
rear exterior.
RISK OF ELECTRIC SHOCK DO NOT
OPEN
No operator serviceable parts inside. Refer servicing to
qualified personnel.
To avoid electrical shock, do not open the cabinet.
Refer servicing to qualified personnel only.
Precautions
On power sources
• AC power cord (mains lead) must be changed only at
the qualified service shop.
• The unit is not disconnected from the AC power
source (mains) as long as it is connected to the wall
outlet (mains), even if the unit itself has been turned
off.
• Install this system so that the AC power cord (mains)
can be unplugged from the wall socket immediately
in the event of trouble.
2GB
model name [DAV-DZ1000]
[2-895-978-12(1)]
filename[I:\FM E_data\1011_DAVDZ1000_rev\2895978121\2895978121DAVDZ1000\gb02regTOC.fm]
masterpage:Right
specdef v20070110
Table of Contents
Welcome!................................................ 2
About This Manual ................................. 5
This System Can Play the Following
Discs .................................................5
Getting Started – BASIC –
Step 1: Connecting the System and
TV ............................................... 9
Step 2: Positioning
the System............................... 14
Step 3: Performing the Quick
Setup........................................ 14
Getting Started
– ADVANCED –
Turning off the Demonstration ............. 17
Installing the Center Speaker on
a Wall.............................................. 18
Connecting the TV (Advanced) ............ 19
Connecting Other Components............. 23
Basic Operations
Playing Discs ................................ 25
Enjoying the Radio or Other
Components............................ 26
Enjoying TV or VCR Sound from All
Speakers.................................. 27
Selecting the Movie or Music
Mode ........................................ 28
Sound Adjustments
Enjoying Surround Sound by Using Sound
Field ................................................ 29
Enjoying Multiplex Broadcast Sound... 31
(DUAL MONO)
Resuming Playback from the Point Where
You Stopped the Disc..................... 34
(Resume Play)
Creating Your Own Program................ 35
(Program Play)
Playing in Random Order ..................... 37
(Shuffle Play)
Playing Repeatedly ............................... 38
(Repeat Play)
Using the DVD’s Menu ........................ 39
Changing the Sound.............................. 39
Selecting [ORIGINAL] or [PLAY LIST]
on a DVD-R/DVD-RW.................. 41
Viewing Information About the Disc ... 42
Changing the Angles ............................ 44
Displaying the Subtitles........................ 45
Adjusting the Delay Between the Picture
and Sound....................................... 45
(A/V SYNC)
About MP3 Audio Tracks and JPEG
Image Files ..................................... 46
Playing DATA CDs or DATA DVDs with
MP3 Audio Tracks and JPEG Image
Files ................................................ 48
Playing Audio Tracks and Images as a
Slide Show with Sound .................. 50
Enjoying DivX® Videos ...................... 52
Playing VIDEO CDs with PBC Functions
(Ver.2.0) ......................................... 54
(PBC Playback)
Tuner Functions
Presetting Radio Stations...................... 55
Listening to the Radio........................... 56
Various Functions for Playing
Discs
Searching for a Particular Point on
a Disc .............................................. 32
(Scan, Slow-motion Play, Freeze
Frame)
Searching for a Title/Chapter/Track/
Scene, etc. ....................................... 33
Searching by Scene ............................... 34
(Picture Navigation)
continued
3GB
model name [DAV-DZ1000]
[2-895-978-12(1)]
filename[I:\FM E_data\1011_DAVDZ1000_rev\2895978121\2895978121DAVDZ1000\gb02regTOC.fm]
Other Operations
Controlling the TV with the Supplied
Remote............................................ 58
Using the THEATRE SYNC
Function .......................................... 59
Enjoying Karaoke ................................. 60
Using the Sound Effect ......................... 64
Using the Sleep Timer .......................... 65
Changing the Brightness of the Front
Panel Display .................................. 66
Using the DIGITAL MEDIA PORT
Adapter ........................................... 66
(Except for Mexican and Latin
American models)
Deactivating the Buttons on the Unit.... 67
(Child Lock)
masterpage:Left
specdef v20070110
Additional Information
Precautions ........................................... 84
Notes about the Discs ........................... 85
Troubleshooting.................................... 85
Self-diagnosis Function ........................ 89
(When letters/numbers appear in
the display)
Specifications ....................................... 90
Glossary................................................ 91
Language Code List.............................. 95
Index to Parts and Controls .................. 96
Guide to the Control Menu Display ..... 99
DVD Setup Display List..................... 103
System Menu List............................... 104
Index ................................................... 105
Advanced Settings and
Adjustments
Locking Discs ....................................... 68
(CUSTOM PARENTAL
CONTROL, PARENTAL
CONTROL)
Getting Optimal Surround Sound for a
Room .............................................. 71
(SPEAKER FORMATION)
Calibrating the Appropriate Settings
Automatically ................................. 73
(AUTO CALIBRATION)
Using the Setup Display........................ 75
Setting the Display or Sound Track
Language ........................................ 77
[LANGUAGE SETUP]
Settings for the Display......................... 77
[SCREEN SETUP]
Custom Settings .................................... 79
[CUSTOM SETUP]
Settings for the Speakers....................... 81
[SPEAKER SETUP]
Returning to the Default Settings.......... 83
4GB
model name [DAV-DZ1000]
[2-895-978-12(1)]
filename[I:\FM E_data\1011_DAVDZ1000_rev\2895978121\2895978121DAVDZ1000\gb03reg.fm]
About This Manual
• The instructions in this manual describe the
controls on the remote. You can also use the
controls on the unit if they have the same or
similar names as those on the remote.
• The Control Menu items may vary depending
on the area.
• “DVD” may be used as a general term for
DVD VIDEOs, DVD+RWs/DVD+Rs, and
DVD-RWs/DVD-Rs.
• Measurements are expressed in feet (ft) for
North American models.
• The following symbols are used in this
manual.
Symbol
masterpage:Right
specdef v20070110
This System Can Play the
Following Discs
Format of
discs
Disc logo
DVD VIDEO
DVD-RW/
DVD-R
DVD+RW/
DVD+R
Meaning
Functions available for DVD
VIDEOs, DVD-Rs/DVD-RWs in
video mode, and DVD+Rs/
DVD+RWs
Functions available for DVD-Rs/
DVD-RWs in VR (Video
Recording) mode
Functions available for VIDEO
CDs (including Super VCDs or CDRs/CD-RWs in video CD format or
Super VCD format)
Functions available for music CDs
or CD-Rs/CD-RWs in music CD
format
Functions available for DATA CDs
(CD-ROMs/CD-Rs/CD-RWs)
containing MP31) audio tracks,
JPEG image files, and DivX2)3)
video files
Functions available for DATA
DVDs (DVD-ROMs/DVD-Rs/
DVD-RWs/DVD+Rs/DVD+RWs)
containing MP31) audio tracks,
JPEG image files, and DivX2)3)
video files
1)
MP3 (MPEG1 Audio Layer 3) is a standard format
defined by ISO/MPEG which compresses audio data.
2)
DivX® is a video file compression technology,
developed by DivX, Inc.
3) DivX,
DivX Certified, and associated logos are
trademarks of DivX, Inc. and are used under license.
VIDEO CD
(Ver. 1.1 and
2.0 discs)/
Audio CD
CD-RW/CD-R
(audio data)
(MP3 files)
(JPEG files)
“DVD-RW,” “DVD+RW,” “DVD+R,”
“DVD VIDEO,” and the “CD” logos are trademarks.
Note about CDs/DVDs
The system can play CD-ROMs/CD-Rs/CDRWs recorded in the following formats:
– audio CD format
– VIDEO CD format
– MP3 audio tracks, JPEG image files, and
DivX video files of format conforming to ISO
9660 Level 1/Level 2, or its extended format,
Joliet
continued
5GB
model name [DAV-DZ1000]
[2-895-978-12(1)]
filename[I:\FM E_data\1011_DAVDZ1000_rev\2895978121\2895978121DAVDZ1000\gb03reg.fm]
The system can play DVD-ROMs/DVD+RWs/
DVD-RWs/DVD+Rs/DVD-Rs recorded in the
following formats:
– MP3 audio tracks, JPEG image files, and
DivX video files of format conforming to
UDF (Universal Disk Format)
Example of discs that the
system cannot play
The system cannot play the following discs:
• CD-ROMs/CD-Rs/CD-RWs other than those
recorded in the formats listed on page 5
• CD-ROMs recorded in PHOTO CD format
• Data part of CD-Extras
• DVD Audios
• Super Audio CD
• DATA DVDs that do not contain MP3 audio
tracks, JPEG image files, or DivX video files
• DVD-RAMs
masterpage:Left
specdef v20070110
Music discs encoded with
copyright protection
technologies
This product is designed to play back discs that
conform to the Compact Disc (CD) standard.
Recently, various music discs encoded with
copyright protection technologies are marketed
by some record companies. Please be aware that
among those discs, there are some that do not
conform to the CD standard and may not be
playable by this product.
Note on DualDiscs
A DualDisc is a two sided disc product which
mates DVD recorded material on one side with
digital audio material on the other side.
However, since the audio material side does not
conform to the Compact Disc (CD) standard,
playback on this product is not guaranteed.
About Multi Session CD
Also, the system cannot play the following
discs:
• A DVD VIDEO with a different region code
(page 7, 93)
• A disc that has a non-standard shape (e.g.,
card, heart)
• A disc with paper or stickers on it
• A disc that has the adhesive of cellophane tape
or a sticker still left on it
Notes about CD-R/CD-RW/DVD-R/
DVD-RW/DVD+R/DVD+RW
In some cases, CD-R/CD-RW/DVD-R/DVDRW/DVD+R/DVD+RW cannot be played on
this system due to the recording quality or
physical condition of the disc, or the
characteristics of the recording device and
authoring software.
The disc will not play if it has not been correctly
finalized. For more information, see the
operating instructions for the recording device.
Note that some playback functions may not
work with some DVD+RWs/DVD+Rs, even if
they have been correctly finalized. In this case,
view the disc by normal playback. Also some
DATA CDs/DATA DVDs created in Packet
Write format cannot be played.
• This system can play Multi Session CDs when
an MP3 audio track is contained in the first
session. Any subsequent MP3 audio tracks
recorded in later sessions can also be played
back.
• This system can play Multi Session CDs when
a JPEG image file is contained in the first
session. Any subsequent JPEG image files
recorded in later sessions can also be played
back.
• If audio tracks and images in music CD format
or video CD format are recorded in the first
session, only the first session will be played
back.
6GB
model name [DAV-DZ1000]
[2-895-978-12(1)]
filename[I:\FM E_data\1011_DAVDZ1000_rev\2895978121\2895978121DAVDZ1000\gb03reg.fm]
masterpage:Right
specdef v20070110
Region code
Your system has a region code printed on the
rear of the unit and will only play DVDs labeled
with the same region code.
DVD VIDEOs labeled ALL will also play on this
system.
If you try to play any other DVD VIDEO, the
message [Playback prohibited by area
limitations.] will appear on the TV screen.
Depending on the DVD VIDEO, no region code
indication may be given even though playing the
DVD VIDEO is prohibited by area restrictions.
Note about playback
operations of DVDs and
VIDEO CDs
Some playback operations of DVDs and VIDEO
CDs may be intentionally set by software
producers. Since this system plays DVDs and
VIDEO CDs according to the disc contents the
software producers designed, some playback
features may not be available. Be sure to read the
operating instructions supplied with the DVDs
or VIDEO CDs.
Copyrights
This product incorporates copyright protection
technology that is protected by U.S. patents and
other intellectual property rights. Use of this
copyright protection technology must be
authorized by Macrovision, and is intended for
home and other limited viewing uses only unless
otherwise authorized by Macrovision. Reverse
engineering or disassembly is prohibited.
This system incorporates with Dolby* Digital
and Dolby Pro Logic (II) adaptive matrix
surround decoder and the DTS** Digital
Surround System.
* Manufactured under license from Dolby
Laboratories.
“Dolby”, “Pro Logic”, and the double-D symbol are
trademarks of Dolby Laboratories.
** Manufactured under license from DTS, Inc.
“DTS” and “DTS Digital Surround” are registered
trademarks of DTS, Inc.
7GB
model name [DAV-DZ1000]
[2-895-978-12(1)]
filename[I:\FM E_data\1011_DAVDZ1000_rev\2895978121\2895978121DAVDZ1000\gb04gsb.fm]
masterpage:Left
specdef v20070110
Getting Started – BASIC –
Getting Started – BASIC –
See Unpacking in Specifications, page 90.
Inserting batteries into the remote
You can control the system using the supplied remote. Insert two R6 (size AA) batteries by matching
the 3 and # ends on the batteries to the markings inside the compartment. To use the remote, point it
at the remote sensor on the unit.
Note
• Do not leave the remote in an extremely hot or humid place.
• Do not use a new battery with an old one.
• Do not drop any foreign object into the remote casing, particularly when replacing the batteries.
• Do not expose the remote sensor to direct sunlight or lighting apparatus. Doing so may cause a malfunction.
• If you do not intend to use the remote for an extended period of time, remove the batteries to avoid possible damage
from battery leakage and corrosion.
8GB
model name [DAV-DZ1000]
[2-895-978-12(1)]
filename[I:\FM E_data\1011_DAVDZ1000_rev\2895978121\2895978121DAVDZ1000\gb04gsb.fm]
masterpage:Right
specdef v20070110
Step 1: Connecting the System and TV
Refer to the connection diagram below, and read the additional information from 1 to 4 on the
following pages.
Front speaker (R)
Front speaker (L)
Center speaker
AM loop antenna (aerial)
SPEAKER
FRONT R
FRONT L
SUR R
COAXIAL
SUR L
AM
FM75
R AUDIO IN L
CENTER
TV
DIR-TC1
SPEAKER
WOOFER
VIDEO
DIGITAL IN
(DVD ONLY)
OUT
(DVD ONLY)
S VIDEO
COAXIAL
Y
OPTICAL
SAT/CABLE
P B/C B
PPRR/C
/CRR
COMPONENT VIDEO OUT
(DVD ONLY)
VIDEO IN
MONITOR OUT
R AUDIO IN L
SAT/CABLE
AC power cord (mains lead)
FM wire antenna
(aerial)
A
B
AUDIO
OUT
VIDEO
IN
L
R
TV
Subwoofer
Surround speaker (R)
Surround speaker (L)
:Signal flow
continued
9GB
model name [DAV-DZ1000]
[2-895-978-12(1)]
Getting Started – BASIC –
The following is the basic connection of the unit to the speakers and TV. For other TV connections, see
page 19. For other component connection, see page 23.
To accept progressive signals, see page 21.
To change the color system (PAL or NTSC), see page 13.
filename[I:\FM E_data\1011_DAVDZ1000_rev\2895978121\2895978121DAVDZ1000\gb04gsb.fm]
masterpage:Left
specdef v20070110
Getting Started – BASIC –
1 Connecting the Speakers
Required cords
The connector and color tube of the speaker cords are the same color as the label of the jacks to be
connected.
For the center speaker
To the SPEAKER jack
Color tube
(+)
(–)
For the other speakers
To the SPEAKER jack
Color tube
(+)
(–)
Note
• Do not catch the speaker cord insulation in the SPEAKER jack.
10GB
model name [DAV-DZ1000]
[2-895-978-12(1)]
filename[I:\FM E_data\1011_DAVDZ1000_rev\2895978121\2895978121DAVDZ1000\gb04gsb.fm]
masterpage:Right
specdef v20070110
To avoid short-circuiting the speakers
For the center speaker
Stripped speaker cord is touching
another speaker terminal.
Stripped cords are touching each other
due to excessive removal of insulation.
For the other speakers
Stripped speaker cord is touching
another speaker terminal.
Stripped cords are touching each other
due to excessive removal of insulation.
After connecting all the components, speakers, and AC power cord (mains lead), output a test tone to
check that all the speakers are connected correctly. For details on outputting a test tone, see page 82.
If no sound is heard from a speaker while outputting a test tone, or a test tone is output from a speaker
other than the one currently displayed on the Setup Display, the speaker may be short-circuited. If this
happens, check the speaker connection again.
Note
• Be sure to match the speaker cord to the appropriate terminal on the components: 3 to 3, and # to #. If the cords
are reversed, the sound will lack bass and may be distorted.
2 Connecting the TV
Required cords
A Video cord
.
Yellow
B Audio cord (not supplied)
White (L/audio)
Red (R/audio)
Tip
• When you want to output the TV sound or stereo sound of a 2 channel source from the 6 speakers, select the “Dolby
Pro Logic,” “Dolby Pro Logic II MOVIE,” or “Dolby Pro Logic II MUSIC” sound field (page 29).
continued
11GB
model name [DAV-DZ1000]
[2-895-978-12(1)]
Getting Started – BASIC –
Short-circuiting of the speakers may damage the system. To prevent this, be sure to follow these
precautions when connecting the speakers. Make sure the bare wire of each speaker cord does not touch
another speaker terminal or the bare wire of another speaker cord, such as shown below.
filename[I:\FM E_data\1011_DAVDZ1000_rev\2895978121\2895978121DAVDZ1000\gb04gsb.fm]
masterpage:Left
specdef v20070110
Getting Started – BASIC –
3 Connecting the Antenna (Aerial)
To connect the AM loop antenna (aerial)
The shape and the length of the antenna (aerial) is designed to receive AM signals. Do not dismantle
or roll up the antenna (aerial).
1
2
3
Remove only the loop part from the plastic stand.
Set up the AM loop antenna (aerial).
Connect the cords to the AM antenna (aerial) terminals.
Cord (A) or cord (B) can be connected to either terminal.
Insert the cord pushing
down the terminal clamp.
A
B
Insert until this
part.
Note
• Do not place the AM loop antenna (aerial) near the unit or other AV equipment, as noise may result.
Tip
• Adjust the direction of the AM loop antenna (aerial) for best AM broadcast sound.
4
Make sure the AM loop antenna (aerial) is connected firmly by pulling softly.
To connect the FM wire antenna (aerial)
Connect the FM wire antenna (aerial) to the COAXIAL FM 75 Ω jack.
FM wire antenna (aerial)
(supplied)
FM wire antenna (aerial)
(supplied)
or
COAXIAL FM 75 Ω jack
COAXIAL FM 75 Ω jack
12GB
model name [DAV-DZ1000]
[2-895-978-12(1)]
filename[I:\FM E_data\1011_DAVDZ1000_rev\2895978121\2895978121DAVDZ1000\gb04gsb.fm]
masterpage:Right
specdef v20070110
Note
Tip
• If you have poor FM reception, use a 75-ohm coaxial cable (not supplied) to connect the unit to an outdoor FM
antenna (aerial) as shown below.
Unit
Outdoor FM antenna (aerial)
4 Connecting the AC power cord (mains lead)
Before connecting the AC power cord (mains lead) of this unit to a wall outlet (mains), connect the
speakers to the unit.
Changing the color system (PAL or NTSC)
(Asian, Australian, and Middle Eastern models only)
Depending on the TV to be connected, you may be required to select either PAL or NTSC for the color
system.
The initial setting of the system for Australian and Middle Eastern models is PAL.
The initial setting of the system for Asian models is NTSC.
To change the color system
1
2
Turn off the system by pressing "/1.
Turn on the system by pressing "/1 while pressing X on the unit.
Each time you perform this operation, the color system toggles between PAL and NTSC.
“NTSC” lights up in the front panel display when the color system is set to NTSC.
13GB
model name [DAV-DZ1000]
[2-895-978-12(1)]
Getting Started – BASIC –
• Be sure to fully extend the FM wire antenna (aerial).
• After connecting the FM wire antenna (aerial), keep it as horizontal as possible.
Getting Started – BASIC –
filename[I:\FM E_data\1011_DAVDZ1000_rev\2895978121\2895978121DAVDZ1000\gb04gsb.fm]
Step 2: Positioning the
System
Positioning the speakers
For the best possible surround sound, all the
speakers other than the subwoofer should be
placed at the same distance from the listening
position (A).
masterpage:Left
specdef v20070110
Step 3: Performing the
Quick Setup
Follow the steps below to make the minimum
number of basic adjustments for using the
system.
"/1
Place speakers as illustrated below.
C/X/x/c,
DISPLAY
1
2
Turn on the TV.
Press [/1.
Note
• Do not set the speakers in an inclined position.
• Do not place the speakers in locations that are:
– Extremely hot or cold
– Dusty or dirty
– Very humid
– Subject to vibrations
– Subject to direct sunlight
• When cleaning, use a soft cloth such as a cleaning
cloth for glasses.
• Do not use any type of abrasive pad, scouring
powder, or solvent such as alcohol or benzine.
Tip
• When you change the positions of the speakers, it is
recommended that you change the settings. For
details, see “Getting Optimal Surround Sound for a
Room” (page 71) and “Calibrating the Appropriate
Settings Automatically” (page 73).
Note
• Make sure that the function is set to “DVD”
(page 25).
3
Switch the input selector on your TV so
that the signal from the system
appears on the TV screen.
[Press [ENTER] to run QUICK SETUP.]
appears at the bottom of the TV screen. If
this message does not appear, recall the
Quick Setup display (page 16) and perform
again.
4
Press
without inserting a disc.
The Setup Display for selecting the
language used in the on-screen display
appears.
14GB
model name [DAV-DZ1000]
[2-895-978-12(1)]
filename[I:\FM E_data\1011_DAVDZ1000_rev\2895978121\2895978121DAVDZ1000\gb04gsb.fm]
masterpage:Right
specdef v20070110
Note
ENGLISH
ENGLISH
FRENCH
SPANISH
PORTUGUESE
• When the wireless kit WAHT-SD1 (not
supplied) is installed, [STANDARD
(WIRELESS)] appears instead (except for
Taiwan model).
10 Press .
11 Connect the calibration mic to the
5
Press X/x to select a language.
The system displays the menu and subtitles
in the selected language.
6
Press
.
The Setup Display for selecting the aspect
ratio of the TV to be connected appears.
SCREEN SETUP
16:9
TV TYPE:
16:9
YCBCR/RGB (HDMI):
4:3CD):
LETTER BOX
COLOR SYSTEM (VIDEO
4:3 PAN SCAN
SCREEN SAVER:
JACKET PICTURE
BACKGROUND:
4:3 OUTPUT:
FULL
A.CAL MIC jack on the front panel and
press X/x to select [YES].
Set up the calibration mic at the ear level
using a tripod, etc. (not supplied). The front
of each speaker should face the calibration
mic, and there should be no obstruction
between the speakers and the calibration
mic. Be quiet during the measurement.
AUDIO IN / MIC 1 /
A.CAL MIC
Calibration mic
7
Press X/x to select the setting that
matches your TV type.
x If you have a wide-screen TV or a 4:3
standard TV with a wide-screen mode
[16:9] (page 77)
x If you have a 4:3 standard TV
[4:3 LETTER BOX] or [4:3 PAN SCAN]
(page 77)
8
Press
.
The Setup Display for selecting the speaker
formation appears.
9
Press C/c to select the speaker
formation image as the speakers are
actually positioned.
For details, see “Getting Optimal Surround
Sound for a Room” (page 71).
SPEAKER FORMATION
STANDARD
continued
15GB
model name [DAV-DZ1000]
[2-895-978-12(1)]
Getting Started – BASIC –
LANGUAGE SETUP
OSD:
MENU:
AUDIO:
SUBTITLE:
filename[I:\FM E_data\1011_DAVDZ1000_rev\2895978121\2895978121DAVDZ1000\gb04gsb.fm]
12 Press
To quit the Quick Setup
.
Press
AUTO CALIBRATION
Getting Started – BASIC –
masterpage:Left
specdef v20070110
Connect calibration mic. Start
measurement?
YES
NO
Auto Calibration starts.
Note
• Loud test sound is output when [AUTO
CALIBRATION] starts. You cannot turn the
volume down. Give consideration to children
and neighbor.
• Avoid being in the measurement area and
making noise during the measurement (which
takes about 1 minute), as it may interfere with
measurement.
Tip
• If you change the position of the speakers, reset the
speaker settings. See “Getting Optimal Surround
Sound for a Room” (page 71) and “Calibrating the
Appropriate Settings Automatically” (page 73).
• If you want to change any of the settings, see “Using
the Setup Display” (page 75).
To recall the Quick Setup display
1
2
NO
Press X/x to select
press
.
[SETUP], then
The options for [SETUP] appear.
12(27)
18(34)
T
0:00:02
c to select [YES].
YES
Press
DISPLAY when the system is in
stop mode.
The Control Menu display appears.
13 Unplug the calibration mic and press C/
Measurement complete.
FRONT L :
5.00m 0.0dB
FRONT R :
5.00m 0.0dB
CENTER :
5.00m + 1.0dB
SUBWOOFER :
5.00m + 4.0dB
SURROUND L :
3.00m - 2.0dB
SURROUND R :
3.00m - 2.0dB
If OK, unplug calibration mic and select
“YES”.
DISPLAY in any Step.
DVD VIDEO
QUICK
QUICK
CUSTOM
RESET
BNR
3
Press X/x to select [QUICK], then press
The Quick Setup display appears.
Note
• The environment of the room in which the
system is installed may affect measurements.
• If measurement fails, follow the message then
retry [AUTO CALIBRATION].
• When you select [SECOND ROOM] for
[SPEAKER FORMATION], measurement of
[SURROUND L] and [SURROUND R] is not
displayed.
14 Press
.
Quick Setup is finished. All connections
and setup operations are complete.
16GB
model name [DAV-DZ1000]
[2-895-978-12(1)]
.
filename[I:\FM E_data\1011_DAVDZ1000_rev\2895978121\2895978121DAVDZ1000\gb05gsa.fm]
Getting Started – ADVANCED –
masterpage:Right
specdef v20070110
Setting the demonstration
mode to on/off
3
"/1
Press SYSTEM MENU.
Press X/x repeatedly until “DEMO”
appears in the front panel display, then
press
or c.
Press X/x to select a setting.
The default setting is underlined.
• “DEMO ON”: sets the demonstration
mode to on.
• “DEMO OFF”: sets the demonstration
mode to off.
4
Press
.
The setting is made.
X/x/c,
SYSTEM
MENU
5
Press SYSTEM MENU.
Getting Started – ADVANCED –
1
2
Turning off the
Demonstration
The system menu turns off.
After connecting the AC power cord (mains
lead), the demonstration appears in the front
panel display. When you press "/1 on the
remote, the demonstration turns off.
Note
• When you press "/1 on the unit, the demonstration
does not turn off.
• When you set the demonstration mode in the system
menu to on, the demonstration does not turn off even
though you press "/1 on the remote. To turn off the
demonstration, set the demonstration mode to off,
then press "/1 on the remote. When the
demonstration mode is set to off, the system saves
power in standby mode.
• If the system is at its factory default settings (ex. after
performing “COLD RESET” (page 83)), you can turn
off the demonstration simply by pressing "/1 on the
remote. Otherwise, to stop the demonstration, you
need to set “DEMO” to “DEMO OFF.”
17GB
model name [DAV-DZ1000]
[2-895-978-12(1)]
filename[I:\FM E_data\1011_DAVDZ1000_rev\2895978121\2895978121DAVDZ1000\gb05gsa.fm]
Installing the Center
Speaker on a Wall
masterpage:Left
specdef v20070110
3
Hang the center speaker on the screws.
4.6 mm
(3/16 inch)
10 mm
(13/32 inch)
You can use the center speaker by installing on
the wall.
Installing the center speaker
on a wall
1
Prepare screws (not supplied) that are
suitable for the hole on the back of
each speaker. See the illustrations
below.
4 mm (5/32 inch)
30 mm (1 3/16 inches)
4.6 mm
(3/16 inch)
Hole on the back of
the speaker
10 mm
(13/32 inch)
2
Rear of speaker
Note
• Use screws that are suitable for the wall material and
strength. As a plaster board wall is especially fragile,
attach the screws securely to a beam and fasten them
to the wall. Install the speakers on a vertical and flat
wall where reinforcement is applied.
• Contact a screw shop or installer regarding the wall
material or screws to be used.
• Sony is not responsible for accident or damage
caused by improper installation, insufficient wall
strength or improper screw installation, natural
calamity, etc.
Fasten the screws to the wall.
265 mm
(10 7/16 inches)
6 to 9 mm
(1/4 to 3/8 inch)
18GB
model name [DAV-DZ1000]
[2-895-978-12(1)]
filename[I:\FM E_data\1011_DAVDZ1000_rev\2895978121\2895978121DAVDZ1000\gb05gsa.fm]
masterpage:Right
specdef v20070110
Connecting the TV (Advanced)
D
TV with HDMI* IN jack
IN
To VIDEO
To HDMI* OUT
SPEAKER
FRONT R
FRONT L
SUR R
Getting Started – ADVANCED –
Sends the played back DVD image to the connected TV.
Check the jacks of your TV, and choose connection method A, B, C, or D. Picture quality improves
in order from A (standard) to D (HDMI).
COAXIAL
SUR L
AM
FM75
R AUDIO IN L
CENTER
TV
DIR-TC1
SPEAKER
WOOFER
VIDEO
DIGITAL IN
(DVD ONLY)
OUT
(DVD ONLY)
S VIDEO
COAXIAL
Y
OPTICAL
SAT/CABLE
P B/C B
Y
B
(DVD ONLY)
MONITOR OUT
VIDEO IN
R AUDIO IN L
SAT/CABLE
To
S VIDEO
To COMPONENT
VIDEO OUT
C
P R/C R
COMPONENT VIDEO OUT
A
S VIDEO
IN
VIDEO
IN
PB/CB
PR/CR
TV with COMPONENT
VIDEO IN jacks
TV with S VIDEO IN jack
TV with VIDEO IN jack
:Signal flow
* HDMI (high-definition multimedia interface)
The system incorporates High-Definition Multimedia Interface (HDMITM) technology.
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of
HDMI Licensing LLC.
continued
19GB
model name [DAV-DZ1000]
[2-895-978-12(1)]
filename[I:\FM E_data\1011_DAVDZ1000_rev\2895978121\2895978121DAVDZ1000\gb05gsa.fm]
masterpage:Left
specdef v20070110
A To connect to a TV with the VIDEO IN jack
Connect the video cord.
.
Yellow
B To connect to a TV with the S VIDEO IN jack
Connect an S video cord (not supplied). To use the S video jack instead of the video jack, your TV
monitor must also be connected via an S video jack. S video signals are on a separate bus from the video
signals and will not be output through the video jack.
C To connect to a TV with the COMPONENT VIDEO IN jacks
Connect a component video cord (not supplied). To use the COMPONENT VIDEO OUT jacks (Y, PB/
CB, PR/CR) instead of the video jack, your TV monitor must be equipped with via COMPONENT
VIDEO IN jacks (Y, PB/CB, PR/CR). If your TV accepts progressive format signals, you must use this
connection and set the output channel of the system to progressive format (page 21).
Green
Blue
Red
D To connect to a TV with the HDMI (high-definition multimedia
interface)/DVI (digital visual interface) IN jack
Use a certified HDMI (high-definition multimedia interface) cord (not supplied) to enjoy high quality
digital picture and sound through the HDMI OUT (high-definition multimedia interface out) jack.
To connect to a TV with DVI (digital visual interface) input
Use an HDMI (high-definition multimedia interface)-DVI (digital visual interface) converter cord (not
supplied) with an HDMI (high-definition multimedia interface)-DVI (digital visual interface) adaptor
(not supplied). The DVI (digital visual interface) jack will not accept any audio signals. Furthermore,
you cannot connect the HDMI OUT (high-definition multimedia interface out) jack to DVI (digital
visual interface) jacks that are not HDCP (high-bandwidth digital content protection) compliant (e.g.,
DVI (digital visual interface) jacks on the computer displays).
To select the type of video signal output from the HDMI OUT (highdefinition multimedia interface out) jack
When you connect the unit and the TV with the HDMI cord, selects the type of video signals output
from the HDMI OUT (high-definition multimedia interface out) jack.
For details, refer also to the operating instructions supplied with the TV/projector, etc.
1
Press FUNCTION +/– repeatedly to select “DVD.”
20GB
model name [DAV-DZ1000]
[2-895-978-12(1)]
filename[I:\FM E_data\1011_DAVDZ1000_rev\2895978121\2895978121DAVDZ1000\gb05gsa.fm]
2
masterpage:Right
specdef v20070110
Press VIDEO FORMAT.
The current type of video signals appears in the front panel display.
Each time you press VIDEO FORMAT, the display changes as follows:
t 720 × 480p*
Getting Started – ADVANCED –
r
1280 × 720p*
r
720 × 480p*
r
1920 × 1080i*
• “720 × 480p*”: Sends 720 × 480p video signals.**
• “1280 × 720p*”: Sends 1280 × 720p video signals.
• “1920 × 1080i*”: Sends 1920 × 1080i video signals.
*i: interlace, p: progressive
**Depending on the country, [720 × 576p] may appear.
Note
• When the HDMI indicator on the front panel lights up, images other than [720 × 480p] or [720 × 576p] are stretched
vertically.
When connecting to a standard 4:3 screen TV
Depending on the disc, the image may not fit your TV screen.
To change the aspect ratio, see page 77.
Does your TV accept progressive signals?
Progressive is the method for displaying TV images which reduces flickering, and sharpens the image.
To display using this method, you need to connect to a TV that accepts progressive signals.
VIDEO
FORMAT
FUNCTION +/–
“PROGRE” lights up in the front panel display when the system outputs progressive signals.
1
Press FUNCTION +/– repeatedly to select “DVD.”
continued
21GB
model name [DAV-DZ1000]
[2-895-978-12(1)]
filename[I:\FM E_data\1011_DAVDZ1000_rev\2895978121\2895978121DAVDZ1000\gb05gsa.fm]
2
masterpage:Left
specdef v20070110
Press VIDEO FORMAT.
The current signal appears in the front panel display.
Each time you press VIDEO FORMAT, the display changes as follows:
t NORMAL (INTERLACE)
r
PROGRESSIVE
x NORMAL (INTERLACE)
Select this setting when:
– your TV does not accept progressive signals, or,
– your TV is connected to jacks other than the COMPONENT VIDEO OUT jacks (MONITOR
OUT (VIDEO/S VIDEO)).
x PROGRESSIVE
Select this setting when:
– your TV accepts progressive signals, and,
– the TV is connected to the COMPONENT VIDEO OUT jacks.
Normally select this under the above condition. This automatically detects the software type, and
selects the appropriate conversion method.
Note that the picture will not be clear or no picture will appear if you select these settings when
either of the above conditions are not met.
Note
• When you connect the unit and the TV with the HDMI cord during the system is set to “NORMAL
(INTERLACE),” the system is set to “PROGRESSIVE” automatically.
Tip
• When you connect the unit and the TV with the HDMI cord, VIDEO FORMAT is used for selecting the type of
video signals output from the HDMI OUT jack. For details, see “To select the type of video signal output from the
HDMI OUT (high-definition multimedia interface out) jack” (page 20).
About DVD software types and the conversion method
DVD software can be divided into 2 types: film-based software and video-based software.
Video-based software is derived from TV, such as dramas and sit-coms, and displays images at 30
frames/60 fields per second. Film-based software is derived from film and displays images at 24 frames
per second. Some DVD software contains both video and film.
In order for these images to appear natural on your screen when output in progressive format, the
progressive signals need to be converted to match the type of DVD software that you are watching.
Note
• When you play video-based software in progressive signal format, sections of some types of images may appear
unnatural due to the conversion process when output through the COMPONENT VIDEO OUT jacks. Even though
you set to “PROGRESSIVE,” images from the MONITOR OUT (VIDEO or S VIDEO) jack are unaffected as they
are output in the interlace format.
22GB
model name [DAV-DZ1000]
[2-895-978-12(1)]
filename[I:\FM E_data\1011_DAVDZ1000_rev\2895978121\2895978121DAVDZ1000\gb05gsa.fm]
masterpage:Right
specdef v20070110
Connecting Other Components
You can enjoy other components by connecting the VIDEO/AUDIO OUT jacks of them.
Screws*
DIR-TC1 slot for
the WAHT-SD1
To DMPORT jack
SPEAKER
FRONT R
FRONT L
SUR R
COAXIAL
SUR L
AM
DMPORT
FM75
R AUDIO IN L
CENTER
TV
DIR-TC1
SPEAKER
WOOFER
VIDEO
DIGITAL IN
(DVD ONLY)
OUT
(DVD ONLY)
S VIDEO
COAXIAL
Y
OPTICAL
SAT/CABLE
P B/C B
P R/C R
COMPONENT VIDEO OUT
(DVD ONLY)
MONITOR OUT
VIDEO IN
R AUDIO IN L
SAT/CABLE
To SAT/CABLE
(DIGITAL IN OPTICAL) or
(DIGITAL IN COAXIAL)
Getting Started – ADVANCED –
DIGITAL MEDIA
PORT adapter
To SAT/CABLE
(VIDEO IN/AUDIO IN)
COAXIAL
DIGITAL
OUT
or
VIDEO
OUT
OPTICAL
DIGITAL
OUT
AUDIO
OUT
L
R
:Signal flow
VCR, digital satellite receiver
or PlayStation, etc.
*
CAUTION
Please do not remove the screws before installing the WAHT-SD1.
To connect the VIDEO/AUDIO OUT jacks of other components to the
SAT/CABLE (VIDEO IN/AUDIO IN) jacks of this unit
Connect the VCR or other components to the SAT/CABLE (VIDEO IN/AUDIO IN) jacks using the
video/audio cord (not supplied). When connecting a cord, be sure to match the color-coded sleeves to
the appropriate jacks on the components.
Yellow (Video)
White (L/audio)
Red (R/audio)
continued
23GB
model name [DAV-DZ1000]
[2-895-978-12(1)]
filename[I:\FM E_data\1011_DAVDZ1000_rev\2895978121\2895978121DAVDZ1000\gb05gsa.fm]
masterpage:Left
specdef v20070110
To connect the DIGITAL MEDIA PORT adapter (except for Mexican and
Latin American models)
Connect a DIGITAL MEDIA PORT adapter (not supplied) to the DMPORT jack. For details of the
DIGITAL MEDIA PORT adapter, see “Using the DIGITAL MEDIA PORT Adapter” (page 66).
To listen to the portable audio source sound through the system
Connect the audio output jacks of the portable audio source to the AUDIO IN jack on the front panel
of the unit with the stereo mini-plug cord (not supplied).
Tip
• When listening to MP3 format recordings using a portable audio source, you can enhance the sound.
Press FUNCTION +/– to select “AUDIO.” Connect the portable audio source. Press SOUND FIELD +/– repeatedly
until “A.F.D. STD” appears in the front panel display.
To cancel, select other than “A.F.D. STD.”
If you connect a digital satellite receiver with a DIGITAL OUT (COAXIAL
or OPTICAL) jack
A digital satellite receiver can be connected to the SAT/CABLE (DIGITAL IN COAXIAL or
OPTICAL) jack instead of the SAT/CABLE (AUDIO IN) jacks of the unit.
To connect, use a digital coaxial cord (not supplied) for the DIGITAL IN COAXIAL jack or digital
optical cord (not supplied) for the DIGITAL IN OPTICAL jack.
The system can accept both digital and analog signals. Digital signals have priority over analog signals.
(COAXIAL has priority over OPTICAL.) If the digital signal ceases, the analog signal will be
processed after 2 seconds.
Digital coaxial cord
or
Digital optical cord
If you connect a digital satellite receiver without a DIGITAL OUT jack
Connect the digital satellite receiver to the SAT/CABLE (AUDIO IN) jacks only of the unit.
Wireless system option (except for Taiwan model)
When you install the WAHT-SD1 (not supplied) in the DIR-TC1 slot, you can enjoy wireless
performance by transmission of the sound to the surround speakers. For details, see the operating
instructions of the WAHT-SD1.
Note
• Be sure to make connections securely to avoid hum and noise.
• When you connect another component with a volume control, turn up the volume of the other components to a level
where sound is not distorted.
24GB
model name [DAV-DZ1000]
[2-895-978-12(1)]
filename[I:\FM E_data\1011_DAVDZ1000_rev\2895978121\2895978121DAVDZ1000\gb06bas.fm]
masterpage:Right
specdef v20070110
5
Load a disc.
Place one disc on the tray, and then press A.
Basic Operations
Playing Discs
A
H FUNCTION
Note
Disc tray
Z
• When you play an 8 cm disc, place it on the
inner circle of the tray. Be careful that the disc is
not skewed on the inner circle of the tray.
• Do not forcibly press the disc tray closed with
your finger, as this may cause malfunction.
• Do not place more than one disc on the tray.
Adjust the
volume
"/1
6
Press H.
The system starts playback (continuous
play).
Adjust the volume on the unit.
The volume level appears on the TV screen
and in the front panel display.
FUNCTION
+/–
Note
./>
/
X
H
x
MUTING
VOLUME
+/–
Depending on the DVD VIDEO or VIDEO CD,
some operations may be different or restricted.
Refer to the operating instructions supplied with
your disc.
1
2
3
Turn on your TV.
Switch the input selector on the TV to
this system.
• Depending on the system status, the volume level
may not appear on the TV screen.
• When you set the HDMI CONTROL function to on
(page 79), the TV that is connected to the system with
the HDMI cord can be synch-operated with the
system. For details, see the HDMI CONTROL Guide
(supplied separately).
Tip
• When you connect the system and TV with the HDMI
cord, you can operate them simply, using the HDMI
CONTROL function. For details, see the HDMI
CONTROL Guide (supplied separately).
To save the power in standby
mode
Press "/1 while the system turns on. To cancel
standby mode, press "/1 once.
Press "/1.
The system turns on.
Unless the system is set to “DVD,” press
FUNCTION +/– to select “DVD.”
4
Press A.
continued
25GB
model name [DAV-DZ1000]
[2-895-978-12(1)]
Basic Operations
"/1
filename[I:\FM E_data\1011_DAVDZ1000_rev\2895978121\2895978121DAVDZ1000\gb06bas.fm]
Basic Operations
Additional operations
To
Press
Stop
x
Pause
X
Resume play after pause
X or H
Go to the next chapter,
track, or scene
> (except for JPEG)
Go back to the preceding
chapter, track, or scene
. (except for JPEG)
Turn off the sound
temporarily
MUTING. To cancel,
press it again or
VOLUME + to adjust
the sound volume.
Stop play and remove the
disc
Z on the remote or A
on the unit.
Replay the previous scene*
(instant replay)
during playback.
Briefly fast forward the
current scene**
(instant advance)
during playback.
* DVD VIDEOs/DVD-RWs/DVD-Rs only. The
button can be used except for DivX video files.
** DVD VIDEOs/DVD-RWs/DVD-Rs/DVD+RWs/
DVD+Rs only. The button can be used except for
DivX video files.
Note
• You may not be able to use the instant replay or
instant advance function with some scenes.
masterpage:Left
specdef v20070110
Enjoying the Radio or
Other Components
FUNCTION
+/–
X/x/c,
SYSTEM
MENU
Selecting the connected
component
You can use a VCR or other components
connected to the SAT/CABLE or TV jacks on
the rear panel. Refer to the operating instructions
supplied with the components for further
information.
Press FUNCTION +/– repeatedly until “SAT/
CABLE” or “TV” appears in the front panel
display.
Each time you press FUNCTION +/–, the mode
of the system changes in the following sequence.
DVD t TUNER FM t TUNER AM t
SAT/CABLE t TV t DMPORT* t
AUDIO t …
* Except for Mexican and Latin American models
Note
• When you use both the SAT/CABLE (AUDIO IN)
jacks (analog connection) and SAT/CABLE
(COAXIAL or OPTICAL DIGITAL IN) jack (digital
connection) at the same time, the digital connection
takes priority.
26GB
model name [DAV-DZ1000]
[2-895-978-12(1)]
filename[I:\FM E_data\1011_DAVDZ1000_rev\2895978121\2895978121DAVDZ1000\gb06bas.fm]
Changing the input level of
the sound from connected
components
1
2
3
4
Enjoying TV or VCR Sound
from All Speakers
You can enjoy TV or VCR sound from all the
speakers in this system.
For details, see “Step 1: Connecting the System
and TV” (page 9), “Connecting the TV
(Advanced)” (page 19), and “Connecting Other
Components” (page 23).
Press FUNCTION +/– repeatedly until
“SAT/CABLE,” “TV,” or “AUDIO”
appears in the front panel display.
FUNCTION
+/–
Press SYSTEM MENU.
Press X/x repeatedly until
“ATTENUATE” appears in the front
panel display, then press
or c.
Press X/x to select a setting.
The default setting is underlined.
• “ATT ON”: attenuates the input level.
The output level is changed.
• “ATT OFF”: normal input level.
5
Press
The setting is made.
6
SOUND
FIELD+/–
.
Press SYSTEM MENU.
1
The system menu turns off.
2
Press FUNCTION +/– repeatedly until
“SAT/CABLE” or “TV” appears in the
front panel display.
Press SOUND FIELD +/– repeatedly
until the sound field you want appears
in the front panel display.
When you want to output the TV sound or
stereo sound of a 2 channel source from the
6 speakers, select the “PRO LOGIC,” “PLII
MOVIE,” or “PLII MUSIC” sound field.
For details of sound field, see page 29.
Note
• When you set the [HDMI CONTROL] setting in
[CUSTOM SETUP] to [ON] (page 79), the System
Audio Control function is activated and no sound
may be output from the TV. For details of the System
Audio Control function, see the HDMI CONTROL
Guide (supplied separately).
• When you use both the SAT/CABLE (AUDIO IN)
jacks (analog connection) and SAT/CABLE
(COAXIAL or OPTICAL DIGITAL IN) jack (digital
connection) at the same time, the digital connection
takes priority.
27GB
model name [DAV-DZ1000]
[2-895-978-12(1)]
Basic Operations
Distortion may occur when listening to a
component connected to the SAT/CABLE or
TV jacks on the rear panel or to the AUDIO IN
jack on the front panel. This is not a malfunction
and will depend on the component connected.
To prevent this, you can change the input level
from the sound of the other components.
masterpage:Right
specdef v20070110
filename[I:\FM E_data\1011_DAVDZ1000_rev\2895978121\2895978121DAVDZ1000\gb06bas.fm]
masterpage:Left
specdef v20070110
Selecting the Movie or
Music Mode
Basic Operations
You can choose a suitable sound mode for
movies or music.
MOVIE/
MUSIC
Press MOVIE/MUSIC during playback.
Press MOVIE/MUSIC repeatedly until the
mode you want lights up in the front panel
display. The default setting is underlined.
• AUTO: selects the mode automatically to
produce the sound effect depending on the disc
or sound stream.
• MOVIE: provides the sound for movies.
• MUSIC: provides the sound for music.
Tip
• When the movie or music mode is selected,
“MOVIE” or “MUSIC” is displayed in the front panel
display. When neither “MOVIE” or “MUSIC” is
displayed in the front panel display, “AUTO” is
selected.
Note
• Depending on the disc or source, when you select
“AUTO,” the beginning of the sound may be cut off
as the optimum mode is automatically selected. To
avoid cutting the sound, select “MOVIE” or
“MUSIC.”
28GB
model name [DAV-DZ1000]
[2-895-978-12(1)]
filename[I:\FM E_data\1011_DAVDZ1000_rev\2895978121\2895978121DAVDZ1000\gb07sou.fm]
masterpage:Right
specdef v20070110
Automatic outputting of the
original sound
Sound Adjustments
Enjoying Surround Sound
by Using Sound Field
The auto decoding function automatically
detects the type of audio signal being input
(Dolby Digital, DTS, or standard 2 channel
stereo) and performs the proper decoding if
necessary. This mode presents the sound as it
was recorded/encoded, without adding any
effects (e.g. reverberation).
However, if there are no low frequency signals
(Dolby Digital LFE, etc.), it will generate a low
frequency signal for output to the subwoofer.
Outputting the sound from
multiple speakers
x AUTO FORMAT DIRECT MULTI
Sound Adjustments
You can take advantage of surround sound
simply by selecting one of the system’s preprogrammed sound fields. They bring exciting
and powerful sound of movie theaters into your
home.
x AUTO FORMAT DIRECT STANDARD
This mode lets you enjoy audio playback of all
types of discs from multiple speakers.
Note
SOUND
FIELD+/–
Press SOUND FIELD +/–.
Press SOUND FIELD +/– repeatedly until the
sound field you want appears in the front panel
display.
All sound field
Sound field
Display
AUTO FORMAT DIRECT
STANDARD
A.F.D. STD
AUTO FORMAT DIRECT
MULTI
A.F.D. MULTI
Dolby Pro Logic
PRO LOGIC
• The sound is not output from multiple speakers
depending on the source.
• Depending on the disc or source, the beginning of the
sound may be cut off as the optimum mode is
automatically selected. To avoid cutting the sound,
select “A.F.D. STD.”
Outputting 2 channel sources
like CDs by 5.1channel
x Dolby Pro Logic
Dolby Pro Logic produces five output channels
from 2 channel sources. This mode performs Pro
Logic decoding to the input signal and output to
front, center, and surround speakers.
Meanwhile, the surround channel becomes
monaural.
x Dolby Pro Logic II MOVIE/MUSIC
Dolby Pro Logic II MOVIE
PLII MOVIE
Dolby Pro Logic II MUSIC
PLII MUSIC
CINEMA STUDIO EX A
C. ST. EX A*
CINEMA STUDIO EX B
C. ST. EX B*
CINEMA STUDIO EX C
C. ST. EX C*
2 CHANNEL STEREO
2CH STEREO
Dolby Pro Logic II produces five full-bandwidth
output channels from 2 channel sources. This is
done using an advanced, high-purity matrix
surround decoder that extracts the spatial
properties of the original recording without
adding any new sounds or tonal colorations.
* Use DCS Technology
continued
29GB
model name [DAV-DZ1000]
[2-895-978-12(1)]
filename[I:\FM E_data\1011_DAVDZ1000_rev\2895978121\2895978121DAVDZ1000\gb07sou.fm]
Note
• When the input signal is multi channel source, Dolby
Pro Logic and Dolby Pro Logic II MOVIE/MUSIC
are canceled and the multi channel source is output
directly.
• When the bilingual broadcast sound is input, Dolby
Pro Logic and Dolby Pro Logic II MOVIE/MUSIC
are not effective.
Enjoying Digital Cinema
Sound
About DCS (Digital Cinema
Sound)
In collaboration with Sony Pictures
Entertainment, Sony measured the sound
environment of their studios and integrated the
data of the measurement and Sony’s own DSP
(Digital Signal Processor) technology to
develop “Digital Cinema Sound.” “Digital
Cinema Sound” simulates in a home theater an
ideal movie theater sound environment based on
the preference of the movie director.
x CINEMA STUDIO EX A (Cinema Studio
EX A)
masterpage:Left
specdef v20070110
About Cinema Studio EX
Cinema Studio EX is ideal for enjoying movie
software encoded with multi channel format,
such as the Dolby Digital DVD. This mode
reproduces the sound characteristics of Sony
Pictures Entertainment’s studios.
Cinema Studio EX consists of the following
three elements.
• Virtual Multi Dimension
Creates five sets of virtual speakers
surrounding the listener from a single pair of
actual surround speakers.
• Screen Depth Matching
In a movie theater, sound seems to come from
inside the image reflected on the movie screen.
This element creates the same sensation in
your listening room by shifting the sound of
the front speakers “into” the screen.
• Cinema Studio Reverberation
Reproduces the reverberations peculiar to a
movie theater. Cinema Studio EX is the
integrated mode which operates these
elements simultaneously.
Note
Reproduces the sound characteristics of the
Sony Pictures Entertainment “Cary Grant
Theater” cinema production studio. This is a
standard mode, great for watching most any type
of movie.
• The virtual speaker effect may cause increased noise
in the playback signal.
• When listening with sound fields that employ virtual
speakers, you will not be able to hear any sound
coming directly from the surround speakers.
x CINEMA STUDIO EX B (Cinema Studio
EX B)
Using only the front speaker
and subwoofer
Reproduces the sound characteristics of the
Sony Pictures Entertainment “Kim Novak
Theater” cinema production studio. This mode
is ideal for watching science-fiction or action
movies with lots of sound effects.
x CINEMA STUDIO EX C (Cinema Studio
EX C)
Reproduces the sound characteristics of the
Sony Pictures Entertainment scoring stage. This
mode is ideal for watching musicals or classic
films where music is featured in the soundtrack.
x 2 CHANNEL STEREO
This mode outputs the sound from the front left
and right speakers and subwoofer. Standard 2
channel (stereo) sources completely bypass the
sound field processing. Multi channel surround
formats are downmixed to two channels.
This allows you to play any source using only
the front left and right speakers and subwoofer.
To turn the surround effect off
Press SOUND FIELD +/– repeatedly until
“A.F.D. STD” or “2CH STEREO” appears in
the front panel display.
30GB
model name [DAV-DZ1000]
[2-895-978-12(1)]
filename[I:\FM E_data\1011_DAVDZ1000_rev\2895978121\2895978121DAVDZ1000\gb07sou.fm]
Tip
• The system memorizes the last sound field selected
for each function mode.
Whenever you select a function such as DVD or
TUNER, the sound field that was last applied to
function is automatically applied again. For example,
if you listen to DVD with PRO LOGIC as the sound
field, then change to another function, and then return
to DVD, PRO LOGIC will be applied again.
masterpage:Right
specdef v20070110
Enjoying Multiplex
Broadcast Sound
(DUAL MONO)
You can enjoy multiplex broadcast sound when
the system receive or play the Dolby Digital
multiplex broadcast signal.
Note
Sound Adjustments
• To receive the Dolby Digital signal, you need to
connect a digital satellite tuner to the unit with an
optical or coaxial digital cord (page 23) and set the
digital output mode of the digital satellite tuner to
Dolby Digital.
AUDIO
Press AUDIO.
Press AUDIO repeatedly until the signal you
want appears in the front panel display.
The default setting is underlined.
• “MAIN”: Sound of the main language will be
output.
• “SUB”: Sound of the sub language will be
output.
• “MAIN+SUB”: Mixed sound of both the main
and sub languages will be output.
31GB
model name [DAV-DZ1000]
[2-895-978-12(1)]
filename[I:\FM E_data\1011_DAVDZ1000_rev\2895978121\2895978121DAVDZ1000\gb08pla.fm]
masterpage:Left
specdef v20070110
With each press, playback speed becomes faster.
Various Functions for Playing Discs
Searching for a Particular
Point on a Disc
(Scan, Slow-motion Play, Freeze
Frame)
You can quickly locate a particular point on a
disc by monitoring the picture or playing back
slowly.
Note
• Depending on the DVD/DivX video/VIDEO CD, you
may not be able to do some of the operations
described.
Locating a point quickly by
playing a disc in fast forward
or fast reverse (Scan)
(Except for JPEG)
Press /m or M/ while playing a disc.
When you find the point you want, press H to
return to normal speed. Each time you press /
m or M/ during scan, the playback speed
changes. With each press the indication changes
as shown below. Actual speeds may differ with
some discs.
Playback direction
Watching frame by frame
(Slow-motion Play)
(DVD VIDEO, DVD-R, DVD-RW, DivX
video, VIDEO CD only)
Press /m or M/ when the system is in
pause mode. To return to normal playback
speed, press H. Each time you press /m or
M/ during Slow-motion Play, the playback
speed changes. Two speeds are available. With
each press the indication changes as follows:
Playback direction
2
y1
Opposite direction (DVD VIDEO only)
2
y1
Playing one frame at a time
(Freeze Frame)
(DVD VIDEO, DVD-R, DVD-RW, DivX
video, VIDEO CD only)
When the system is in the pause mode, press
to go to the next frame. Press
to go to
the preceding frame (DVD VIDEO/DVD-R/
DVD-RW only). To return to normal playback,
press H.
Note
• You cannot search for a still picture on a DVD-R/
DVD-RW in VR mode.
• For DATA CDs/DATA DVDs, this function works
only for DivX video files.
×2B t 1M t 2M t 3M
3M (DVD VIDEO/DVD-VR mode/DivX video/
VIDEO CD only)
×2B (DVD VIDEO/CD only)
Opposite direction
×2b t 1m t 2m t 3m
3m (DVD VIDEO/DVD-VR mode/DivX video/
VIDEO CD only)
×2b (DVD VIDEO only)
32GB
model name [DAV-DZ1000]
[2-895-978-12(1)]
filename[I:\FM E_data\1011_DAVDZ1000_rev\2895978121\2895978121DAVDZ1000\gb08pla.fm]
Searching for a Title/
Chapter/Track/Scene,
etc.
1
Press
DISPLAY. (When playing a
DATA CD/DATA DVD with JPEG image
files, press
DISPLAY twice.)
The Control Menu display appears.
2
3
Press
12(27)
(34)
T
1:32:55
4
[TITLE], [TRACK], [SCENE]
[CHAPTER], [INDEX]
If you make a mistake
Cancel the number by pressing CLEAR,
then select another number.
5
Press
To search for a scene using the
time code (DVD VIDEO and
DVD-VR mode only)
1
In Step 2, select
[TIME/TEXT].
[T **:**:**] (playing time of the current title)
is selected.
2
[TRACK]
Press
.
[T **:**:**] changes to [T --:--:--].
3
[ALBUM]
[FILE]
Example: when you select
[CHAPTER]
[** (**)] is selected (** refers to a number).
The number in parentheses indicates the
total number of titles, chapters, tracks,
indexes, scenes, albums or files.
12(27)
18(34)
T
1:32:55
.
The system starts playback from the
selected number.
[TIME/TEXT]
Select [TIME/TEXT] to search for a
starting point by inputting the time code.
DVD VIDEO
Press X/x or the number buttons to
select the title, chapter, track, index,
scene, etc., number you want to search
for.
Press X/x to select the search method.
The display will show different items
depending on the disc.
.
[** (**)] changes to [– – (**)].
Various Functions for Playing Discs
You can search a DVD by title or chapter, and
you can search a VIDEO CD/CD/DATA CD/
DATA DVD by track, index, or scene. As titles
and tracks are assigned unique numbers on the
disc, you can select the desired one by entering
its number. Or, you can search for a scene using
the time code.
masterpage:Right
specdef v20070110
DVD VIDEO
Input the time code using the number
buttons, then press
.
For example, to find the scene at 2 hours, 10
minutes, and 20 seconds after the beginning,
just enter [2:10:20].
Tip
• When the Control Menu display is turned off, you can
search for a chapter (DVD VIDEO/DVD-R/DVDRW), track (VIDEO CD/CD), or file (DATA CD/
DATA DVD (DivX video)) by pressing the number
buttons and
.
Note
• You cannot search for a scene on a DVD+RW using
the time code.
Selected row
33GB
model name [DAV-DZ1000]
[2-895-978-12(1)]
filename[I:\FM E_data\1011_DAVDZ1000_rev\2895978121\2895978121DAVDZ1000\gb08pla.fm]
Searching by Scene
(Picture Navigation)
You can divide the TV screen into 9 subscreens
and find the desired scene quickly.
1
masterpage:Left
specdef v20070110
Resuming Playback from
the Point Where You
Stopped the Disc
(Resume Play)
Press PICTURE NAVI during playback.
The following display appears.
CHAPTER VIEWER
2
ENTER
Press PICTURE NAVI repeatedly to
select an item.
When you stop the disc, the system remembers
the point where you pressed x and “RESUME”
appears in the front panel display. As long as
you do not remove the disc, Resume Play will
work even if the system enters standby mode by
pressing "/1.
1
• [TITLE VIEWER] (DVD VIDEO only)
• [CHAPTER VIEWER] (DVD VIDEO
only)
• [TRACK VIEWER] (VIDEO CD/
Super VCD only)
3
Press
“RESUME” appears in the front panel
display.
If “RESUME” does not appear, Resume
Play is not available.
2
.
While playing a disc, press x to stop
playback.
Press H.
The system starts playback from the point
where you stopped the disc in Step 1.
The first scene of each title, chapter, or
track appears as follows.
Note
4
1
2
3
4
5
6
7
8
9
Press C/X/x/c to select a title, chapter,
or track, and press
.
The system starts playback from the
selected scene.
To return to normal play during
setting
Press O RETURN.
Note
• Depending on the disc, you may not be able to select
some items.
• Depending on where you stop the disc, the system
may not resume playback from exactly the same
point.
• The point where you stopped playing may be cleared
when:
– you eject the disc.
– the system enters standby mode (DATA CD/
DATA DVD only).
– you change or reset the settings on the Setup
Display.
– you change the parental control level.
– you change the function by pressing FUNCTION
+/–.
– you disconnect the AC power cord (mains lead).
• For DVD-Rs/DVD-RWs in VR mode, VIDEO CDs,
CDs, DATA CDs, and DATA DVDs, the system
remembers the resume playback point for the current
disc.
• Resume Play does not work during Program Play and
Shuffle Play.
• This function may not work properly with some
discs.
34GB
model name [DAV-DZ1000]
[2-895-978-12(1)]
filename[I:\FM E_data\1011_DAVDZ1000_rev\2895978121\2895978121DAVDZ1000\gb08pla.fm]
Tip
• To play from the beginning of the disc, press x twice,
then press H.
To enjoy a disc that is played
before by resume playback
(Multi-disc Resume)
(DVD VIDEO, VIDEO CD only)
Creating Your Own
Program
(Program Play)
You can play the contents of a disc in the order
you want by arranging the order of the tracks on
the disc to create your own program. You can
program up to 99 tracks.
1
Press
DISPLAY.
The Control Menu display appears.
2
Press X/x to select
[PROGRAM], then press
.
The options for [PROGRAM] appear.
Tip
T
• The system can store at least 10 resume playback
points.
• To play from the beginning of the disc, press x twice,
then press H.
OFF
OFF
SET
ON
6 (14)
2:50
PLAY
CD
Note
• If [MULTI-DISC RESUME] in [CUSTOM SETUP]
is set to [OFF] (page 80), the resume point is cleared
when you change the function by pressing
FUNCTION +/–.
3
Press X/x to select [SET
press
.
t], then
Various Functions for Playing Discs
This system recalls the point where you stopped
the disc the last time it was played and resumes
playback from that point the next time you insert
the same disc. When the resume playback
memory is full, the resume playback point for
the first disc is deleted.
To activate this function, set [MULTI-DISC
RESUME] in [CUSTOM SETUP] to [ON]. For
details, see “[MULTI-DISC RESUME] (DVD
VIDEO/VIDEO CD only)” (page 80).
masterpage:Right
specdef v20070110
[TRACK] is displayed when you play a
VIDEO CD or CD.
PROGRAM
ALL CLEAR
1. TRACK
2. TRACK – –
3. TRACK – –
4. TRACK – –
5. TRACK – –
6. TRACK – –
7. TRACK – –
Tracks recorded
on a disc
0:00:00
T
––
01
02
03
04
05
06
Total time of the
programmed tracks
continued
35GB
model name [DAV-DZ1000]
[2-895-978-12(1)]
filename[I:\FM E_data\1011_DAVDZ1000_rev\2895978121\2895978121DAVDZ1000\gb08pla.fm]
4
Press c.
To change or cancel a program
The cursor moves to the track row [T] (in
this case, [01]).
1
Follow steps 1 to 3 of “Creating Your Own
Program.”
2
Select the program number of the track you
want to change or cancel using X/x.
PROGRAM
ALL CLEAR
1. TRACK – –
2. TRACK – –
3. TRACK – –
4. TRACK – –
5. TRACK – –
6. TRACK – –
7. TRACK – –
5
masterpage:Left
specdef v20070110
0:00:00
T
––
01
02
03
04
05
06
Select the track you want to program.
For example, select track [02].
Press X/x to select [02] under [T], then
press .
Selected track
3
Follow Step 5 for new programming.
To cancel a program, select [--] under [T],
then press
.
To cancel all of the tracks in the
programmed order
1
Follow steps 1 to 3 of “Creating Your Own
Program.”
2
3
Press X and select [ALL CLEAR].
Press
.
0:15:30
T
PROGRAM
ALL CLEAR
1. TRACK
2. TRACK
3. TRACK
4. TRACK
5. TRACK
6. TRACK
7. TRACK
If you want to delete the track from the
program, press CLEAR.
02
––
––
––
––
––
––
––
01
02
03
04
05
06
Total time of the programmed tracks
6
To program other tracks, repeat steps 4
to 5.
The programmed tracks are displayed in the
selected order.
7
Press H to start Program Play.
Program Play starts.
When the program ends, you can restart the
same program again by pressing H.
To return to normal play
In Step 3, press CLEAR or select [OFF]. To play
the same program again, select [ON] in Step 3
and press .
To turn off the Control Menu
display
Press
DISPLAY repeatedly until the Control
Menu display is turned off.
36GB
model name [DAV-DZ1000]
[2-895-978-12(1)]
filename[I:\FM E_data\1011_DAVDZ1000_rev\2895978121\2895978121DAVDZ1000\gb08pla.fm]
Playing in Random Order
masterpage:Right
specdef v20070110
To turn off the Control Menu
display
(Shuffle Play)
Press
DISPLAY repeatedly until the Control
Menu display is turned off.
You can have the system “shuffle” tracks.
Subsequent “shuffling” may produce a different
playing order.
• You cannot use this function with VIDEO CDs and
Super VCDs with PBC playback.
Note
Note
• Same song may be played repeatedly during MP3
playback.
1
Press
DISPLAY during playback.
Various Functions for Playing Discs
The Control Menu display appears.
2
Press X/x to select
then press
.
[SHUFFLE],
The options for [SHUFFLE] appear.
T
6 (14)
2:50
PLAY
CD
OFF
OFF
TRACK
3
Press X/x to select the item to be
shuffled.
x When playing a VIDEO CD or CD
• [TRACK]: shuffles tracks on the disc.
x When Program Play is activated
• [ON]: shuffles tracks selected in Program
Play.
x When playing a DATA CD (except for
DivX) or DATA DVD (except for DivX)
• [ON (MP3)]: shuffles MP3 audio tracks in
the album on the current disc. When no
album is selected, the first album will play
in random order.
Note
• A track already played is also selected in
random order.
4
Press
.
Shuffle Play starts.
To return to normal play
In Step 3, press CLEAR or select [OFF].
37GB
model name [DAV-DZ1000]
[2-895-978-12(1)]
filename[I:\FM E_data\1011_DAVDZ1000_rev\2895978121\2895978121DAVDZ1000\gb08pla.fm]
masterpage:Left
specdef v20070110
x When playing a DATA CD or DATA
DVD
Playing Repeatedly
• [OFF]: does not play repeatedly.
• [DISC]: repeats all of the albums on the
disc.
• [ALBUM]: repeats the current album.
• [TRACK] (MP3 audio tracks only):
repeats the current track.
• [FILE] (DivX video files only): repeats
the current file.
(Repeat Play)
You can play all the titles, tracks or albums on a
disc or a single title, chapter, track, or album
repeatedly.
You can use a combination of Shuffle or
Program Play modes.
1
Press
Press X/x to select
then press
.
[REPEAT],
The options for [REPEAT] appear.
T
Press
.
The item is selected.
DISPLAY during playback.
The Control Menu display appears.
2
4
6 (14)
2:50
PLAY
CD
To return to normal play
In Step 3, press CLEAR or select [OFF].
To turn off the Control Menu
display
Press
DISPLAY repeatedly until the Control
Menu display is turned off.
Note
OFF
OFF
DISC
TRACK
3
Press X/x to select the item to be
repeated.
The default setting is underlined.
• You cannot use this function with VIDEO CDs and
Super VCDs with PBC playback.
• When playing a DATA CD/DATA DVD which
contains MP3 audio track and JPEG image files, and
their playing time is not the same, the audio sound
will not match the image.
• When [MODE (MP3, JPEG)] is set to [IMAGE
(JPEG)] (page 50), you cannot select [TRACK].
x When playing a DVD VIDEO or DVDVR
• [OFF]: does not play repeatedly.
• [DISC]: repeats all of the titles on the disc.
• [TITLE]: repeats the current title on a
disc.
• [CHAPTER]: repeats the current chapter.
x When playing a VIDEO CD or CD
• [OFF]: does not play repeatedly.
• [DISC]: repeats all of the tracks on the
disc.
• [TRACK]: repeats the current track.
38GB
model name [DAV-DZ1000]
[2-895-978-12(1)]
filename[I:\FM E_data\1011_DAVDZ1000_rev\2895978121\2895978121DAVDZ1000\gb08pla.fm]
Using the DVD’s Menu
1
Press DVD TOP MENU or DVD MENU.
The disc’s menu appears on the TV screen.
The contents of the menu vary from disc to
disc.
2
3
Changing the Sound
When playing a DVD VIDEO or DATA CD/
DATA DVD (DivX video files) recorded in
multiple audio formats (PCM, Dolby Digital,
MPEG audio, or DTS), you can change the
audio format. If the DVD VIDEO is recorded
with multilingual tracks, you can also change the
language.
With VIDEO CDs, CDs, DATA CDs, or DATA
DVDs, you can select the sound from the right or
left channel and listen to the sound of the
selected channel through both the right and left
speakers.
1
The following display appears.
Press C/X/x/c or the number buttons to
select the item you want to play or
change.
Press
Press AUDIO during playback.
1:ENGLISH DOLBY DIGITAL 3/2.1
.
2
Press AUDIO repeatedly to select the
desired audio signal.
Various Functions for Playing Discs
A DVD is divided into a lot of sections, which
make up a picture or music feature. These
sections are called “titles.” When you play a
DVD which contains several titles, you can
select the title you want using DVD TOP
MENU.
When you play DVDs that allow you to select
items such as the language for the subtitles and
the language for the sound, select these items
using DVD MENU.
masterpage:Right
specdef v20070110
x When playing a DVD VIDEO
Depending on the DVD VIDEO, the choice
of language varies.
When four digits are displayed, they
indicate a language code. Refer to
“Language Code List” (page 95) to see
which language the code represents. When
the same language is displayed two or more
times, the DVD VIDEO is recorded in
multiple audio formats.
x When playing a DVD-VR
The types of sound tracks recorded on a disc
are displayed. The default setting is
underlined.
Example:
• [1: MAIN] (main sound)
• [1: SUB] (sub sound)
• [1: MAIN+SUB] (main and sub sound)
• [2: MAIN]
• [2: SUB]
• [2: MAIN+SUB]
continued
39GB
model name [DAV-DZ1000]
[2-895-978-12(1)]
filename[I:\FM E_data\1011_DAVDZ1000_rev\2895978121\2895978121DAVDZ1000\gb08pla.fm]
Note
• [2: MAIN], [2: SUB], and [2: MAIN+SUB] do
not appear when one audio stream is recorded on
the disc.
x When playing a VIDEO CD, CD, DATA
CD (MP3 audio), or DATA DVD (MP3
audio)
The default setting is underlined.
• [STEREO]: the standard stereo sound
• [1/L]: the sound of the left channel
(monaural)
• [2/R]: the sound of the right channel
(monaural)
x When playing a DATA CD (DivX
video) or DATA DVD (DivX video)
The choice of DATA CD or DATA DVD
audio signal formats differ, depending on
the DivX video file contained on the disc.
The format is shown in the display.
masterpage:Left
specdef v20070110
Checking the audio signal
format
(DVD, DivX video only)
If you press AUDIO repeatedly during
playback, the format of the current audio signal
(PCM, Dolby Digital, DTS, etc.) appears as
shown below.
x When playing a DVD
Example:
Dolby Digital 5.1 ch
LFE (Low
Frequency Effect)
Surround (L/R)
1:ENGLISH DOLBY DIGITAL 3 / 2 .1
L
Front (L/R) +
Center
LS
x When playing a Super VCD
The default setting is underlined.
• [1:STEREO]: the stereo sound of the
audio track 1
• [1:1/L]: the sound of the left channel of
the audio track 1 (monaural)
• [1:2/R]: the sound of the right channel of
the audio track 1 (monaural)
• [2:STEREO]: the stereo sound of the
audio track 2
• [2:1/L]: the sound of the left channel of
the audio track 2 (monaural)
• [2:2/R]: the sound of the right channel of
the audio track 2 (monaural)
R
RS
Currently playing
program format
Example:
Dolby Digital 3 ch
Surround
(Monaural)
Front (L/R)
2:SPANISH DOLBY DIGITAL 2 / 1
L
R
S
Note
• While playing a Super VCD on which the audio track
2 is not recorded, no sound will come out when you
select [2:STEREO], [2:1/L], or [2:2/R].
C
LFE
Currently playing
program format
x When playing a DATA CD (DivX video) or
DATA DVD (DivX video)
Example:
MP3 audio
1: MP3 128k
Bit rate
40GB
model name [DAV-DZ1000]
[2-895-978-12(1)]
filename[I:\FM E_data\1011_DAVDZ1000_rev\2895978121\2895978121DAVDZ1000\gb08pla.fm]
About audio signals
Selecting [ORIGINAL] or
[PLAY LIST] on a DVD-R/
DVD-RW
Some DVD-Rs/DVD-RWs in VR (Video
Recording) mode have two types of titles for
playback: originally recorded titles
([ORIGINAL]) and titles that can be created on
recordable DVD players for editing ([PLAY
LIST]). You can select the type of title to be
played.
1
Press
DISPLAY when the system is
in stop mode.
The Control Menu display appears.
2
Press X/x to select
PLAY LIST], then press
[ORIGINAL/
.
The options for [ORIGINAL/PLAY LIST]
appear.
1 (44)
3 ( 28)
T
1:30:50
DVD-VR
PLAY LIST
PLAY LIST
ORIGINAL
3
Various Functions for Playing Discs
Audio signals recorded in a disc contain the
sound elements (channels) shown below. Each
channel is output from a separate speaker.
• Front (L)
• Front (R)
• Center
• Surround (L)
• Surround (R)
• Surround (Monaural): This signal can be either
the Dolby Surround Sound processed signals
or the Dolby Digital sound’s monaural
Surround audio signals.
• LFE (Low Frequency Effect) signal
masterpage:Right
specdef v20070110
Press X/x to select a setting.
The default setting is underlined.
• [PLAY LIST]: plays the titles created
from [ORIGINAL] for editing.
• [ORIGINAL]: plays the titles originally
recorded.
4
Press
.
41GB
model name [DAV-DZ1000]
[2-895-978-12(1)]
filename[I:\FM E_data\1011_DAVDZ1000_rev\2895978121\2895978121DAVDZ1000\gb08pla.fm]
Viewing Information About
the Disc
masterpage:Left
specdef v20070110
When playing a DATA CD (MP3
audio) or DATA DVD (MP3 audio)
1 Playing time and current track number
2 Track (file) name
Tip
• When playing VIDEO CDs with PBC functions, the
playing time is displayed.
Viewing the playing time and
remaining time in the front
panel display
You can check disc information, such as the
remaining time, total number of titles in a DVD,
tracks in a VIDEO CD, CD, MP3, or file name
of a DivX video using the front panel display
(page 98).
Press DISPLAY.
Each time you press DISPLAY while playing
the disc, the display changes 1 t 2 t ...
t 1 t ...
Some displayed items may disappear after a few
seconds.
When playing a DVD VIDEO or
DVD-R/DVD-RW
1 Playing time and number of the current title
2 Remaining time of the current title
3 Playing time and number of the current
chapter
4 Remaining time of the current chapter
5 Disc name
6 Title and chapter
When playing a DATA CD (DivX
video) or DATA DVD (DivX video)
1 Playing time of the current file
2 Current file name
3 Current album and file number
When playing a VIDEO CD
(without PBC functions) or CD
1 Playing time of the current track
2 Remaining time of the current track
3 Playing time of the disc
4 Remaining time of the disc
5 Disc name
6 Track and index*
* VIDEO CD only.
Note
• The system can only display the first level of the
DVD/CD text, such as the disc name or title.
• If an MP3 file name cannot be displayed, “*” will
appear in the front panel display instead.
• The disc name or track name may not be displayed
depending on the text.
• Playing time of MP3 audio tracks and DivX video
files may not be displayed correctly.
Checking the playing time and
remaining time
You can check the playing time and remaining
time of the current title, chapter, or track, and the
total playing time or remaining time of the disc.
You can also check the DVD text and MP3
folder name/file name recorded in the disc.
1
Press DISPLAY during playback.
The following display appears.
T 1:01:57
Time information
2
Press DISPLAY repeatedly to change
the time information.
The display and the kinds of time that you
can check depend on the disc you are
playing.
x When playing a DVD VIDEO or DVDRW
• T **:**:**
Playing time of the current title
• T–**:**:**
Remaining time of the current title
• C **:**:**
Playing time of the current chapter
• C–**:**:**
Remaining time of the current chapter
42GB
model name [DAV-DZ1000]
[2-895-978-12(1)]
filename[I:\FM E_data\1011_DAVDZ1000_rev\2895978121\2895978121DAVDZ1000\gb08pla.fm]
x When playing a VIDEO CD (with PBC
functions)
• **:**
Playing time of the current scene
x When playing a VIDEO CD (without
PBC functions) or CD
To check DATA CD/DATA DVD
(MP3 audio/DivX video) text
By pressing DISPLAY while playing MP3
audio tracks or DivX video files on a DATA
CD/DATA DVD, you can display the name of
the album/track/file, and the audio bit rate (the
amount of data per second of the current audio)
on your TV screen.
Bit rate*
T 17:30
128k
x When playing a DATA CD (MP3
audio) or DATA DVD (MP3 audio)
• T **:**
Playing time of the current track
x When playing a DATA CD (DivX
video) or DATA DVD (DivX video)
• **:**:**
Playing time of the current file
Note
• Characters/marks may not be displayed for some
languages.
• Depending on the type of disc being played, the
system can only display a limited number of
characters. Also, depending on the disc, not all text
characters will be displayed.
JAZZ
RIVER SIDE
Album name
Track/file name
* Appears when:
– playing an MP3 audio track on DATA CDs/DATA
DVDs.
– playing a DivX video file that contains MP3 audio
signals on DATA CDs/DATA DVDs.
Checking the date
information
Various Functions for Playing Discs
• T **:**
Playing time of the current track
• T–**:**
Remaining time of the current track
• D **:**
Playing time of the current disc
• D–**:**
Remaining time of the current disc
masterpage:Right
specdef v20070110
(JPEG only)
Checking the play information
of the disc
To check DVD/CD text
Press DISPLAY repeatedly in Step 2 to display
text recorded in the DVD/CD.
The DVD/CD text appears only when text is
recorded in the disc. You cannot change the text.
If the disc does not contain text, “NO TEXT”
appears.
BRAHMS SYMPHONY
You can check the date information during
playback when the Exif* tag is recorded in the
JPEG image data.
Press
DISPLAY twice during playback.
The Control Menu display appears.
1(8)
1(20)
2007/ 01/ 31
DATA CD JPEG
Date information
* “Exchangeable Image File Format” is a digital
camera image format defined by the Japan
Electronics and Information Technology Industries
Association (JEITA).
continued
43GB
model name [DAV-DZ1000]
[2-895-978-12(1)]
filename[I:\FM E_data\1011_DAVDZ1000_rev\2895978121\2895978121DAVDZ1000\gb08pla.fm]
Tip
• Date information is [YYYY/MM/DD].
YYYY: Year
MM: Month
DD: Day
• Date information varies depending on the area.
masterpage:Left
specdef v20070110
Changing the Angles
If various angles (multi-angles) for a scene are
recorded on a DVD VIDEO, you can change the
viewing angle.
Press ANGLE during playback.
Each time you press ANGLE, the angle changes.
Note
• Depending on the DVD VIDEO, you may not be able
to change the angle even if multi-angles are recorded
on the DVD VIDEO.
44GB
model name [DAV-DZ1000]
[2-895-978-12(1)]
filename[I:\FM E_data\1011_DAVDZ1000_rev\2895978121\2895978121DAVDZ1000\gb08pla.fm]
Displaying the Subtitles
If subtitles are recorded on a disc, you can turn
the subtitles on or off while playing. If
multilingual subtitles are recorded on the disc,
you can change the subtitle language while
playing, or turn the subtitles on or off whenever
you want.
Press SUBTITLE during playback.
Note
• Depending on the DVD VIDEO, you may not be able
to change the subtitles even if multilingual subtitles
are recorded on it. You also may not be able to turn
them off.
• You can change the subtitles if the DivX video file
has an “.AVI” or “.DIVX” extension and contains
subtitle information within the same file.
Adjusting the Delay
Between the Picture and
Sound
(A/V SYNC)
When the sound does not match the pictures on
the TV screen, you can adjust the delay between
the picture and sound.
1
Press
DISPLAY.
The Control Menu display appears.
2
Press X/x to select
then press
.
[A/V SYNC],
The options for [A/V SYNC] appear.
1(12)
1(28)
T
0:00:02
DVD VIDEO
OFF
OFF
ON
3
Press X/x to select a setting.
Various Functions for Playing Discs
Each time you press SUBTITLE, the subtitle
language changes.
masterpage:Right
specdef v20070110
The default setting is underlined.
• [OFF]: does not adjust.
• [ON]: adjusts the difference between
picture and sound.
4
Press
.
Note
• Depending on the input stream, this function may not
be effective.
45GB
model name [DAV-DZ1000]
[2-895-978-12(1)]
filename[I:\FM E_data\1011_DAVDZ1000_rev\2895978121\2895978121DAVDZ1000\gb08pla.fm]
About MP3 Audio Tracks
and JPEG Image Files
What is MP3/JPEG?
MP3 is audio compression technology that
satisfies the ISO/MPEG regulations. JPEG is
image compression technology.
Discs that the system can
play
You can play back DATA CDs (CD-ROMs/CDRs/CD-RWs) or DATA DVDs (DVD-Rs/DVDRWs/DVD+Rs/DVD+RWs/DVD-ROMs)
recorded in MP3 (MPEG1 Audio Layer 3) or
JPEG format. However, the DATA CDs must be
recorded according to ISO 9660 Level 1, Level
2 or Joliet format and DATA DVDs of Universal
Disk Format (UDF) for the system to recognize
the tracks (or files). You can also play discs
recorded in Multi Session.
See the operating instructions supplied with the
CD-R/CD-RW or DVD-R/DVD-RW drives and
the recording software (not supplied) for details
on the recording format.
masterpage:Left
specdef v20070110
MP3 audio track or JPEG
image file that the system can
play
You can play the MP3 audio tracks or JPEG
image files:
• which have the extension “.MP3” (MP3 audio
track) or “.JPG”/“.JPEG” (JPEG image file)
• which conform to the DCF* image file format
* “Design rule for Camera File system”: Image
standards for digital cameras regulated by Japan
Electronics and Information Technology Industries
Association (JEITA).
Note
• The system will play any data with the
extension “.MP3,” “.JPG,” or “.JPEG” even if
they are not in MP3 or JPEG format. Playing
this data may generate a loud noise which
could damage your speaker system.
• The system does not conform to audio in
MP3PRO format.
About the Multi-Session disc
If MP3 audio tracks or JPEG image files are
recorded in the first session, the system will also
play MP3 audio tracks or JPEG image files in
other sessions. If audio tracks and images in
audio CD format or video CD format are
recorded in the first session, only the first
session will be played back.
Note
• The system may not be able to play some DATA
CDs/DATA DVDs created in the Packet Write
format.
46GB
model name [DAV-DZ1000]
[2-895-978-12(1)]
filename[I:\FM E_data\1011_DAVDZ1000_rev\2895978121\2895978121DAVDZ1000\gb08pla.fm]
Playback order of MP3 audio
tracks or JPEG image files
The playback order of MP3 audio tracks or
JPEG image files recorded on a DATA CD or
DATA DVD is as follows:
masterpage:Right
specdef v20070110
Tip
• If you add numbers (01, 02, 03, etc.) to the front of the
track (or file) names when you store the tracks (or
files) in a disc, the tracks (or files) will be played in
that order.
• A disc with many trees takes longer to start playback.
Note
x Structure of disc contents
Tree 1
Tree 3
Tree 4
Tree 5
Various Functions for Playing Discs
Album
Tree 2
• Playback order may differ from the illustration
depending on the software you use to create the
DATA CD or DATA DVD, or if there are more than
200 albums and 300 files in each album.
• The system can recognize up to 200 albums, and will
not play any albums beyond the 200th.
• The system may take longer time to playback, when
progressing to the following album or jump to other
album.
• Some type of JPEG files cannot be played.
Track (MP3 audio) or
File (JPEG image)
When you insert a DATA CD or DATA DVD
and press H, the numbered tracks (or files) are
played sequentially, from 1 through 7. Any
sub-albums/tracks (or files) contained within a
currently selected album take priority over the
next album in the same tree. (Example: C
contains D so 4 is played before 5.)
When you press DVD MENU and the list of
album names appears (page 48), the album
names are arranged in the following order:
A t B t C t D t F t G. Albums
that do not contain tracks (or files) (such as
album E) do not appear in the list.
47GB
model name [DAV-DZ1000]
[2-895-978-12(1)]
filename[I:\FM E_data\1011_DAVDZ1000_rev\2895978121\2895978121DAVDZ1000\gb08pla.fm]
Playing DATA CDs or
DATA DVDs with MP3
Audio Tracks and JPEG
Image Files
Selecting an MP3 audio track
or album
1
Load a DATA CD or DATA DVD.
The albums recorded on the DATA CD or
DATA DVD appear. When an album is
being played, its title is shaded.
3( 30)
ROCK BEST HIT
KARAOKE
MY FAVOURITE SONG
R&B
JAZZ
CLASSIC
SALSA OF CUBA
BOSSA NOVA
2
masterpage:Left
specdef v20070110
To stop playback
Press x.
To play the next or previous MP3
audio track
Press ./>. Note that you can select the
next album by continuing to press > after the
last track on the current album, but that you
cannot return to the previous album by pressing
.. To return to the previous album, select the
album from the album list.
To return to the previous display
Press O RETURN.
To turn off the display
Press DVD MENU.
Selecting a JPEG image file or
album
1
Load a DATA CD or DATA DVD.
The albums recorded on the DATA CD or
DATA DVD appear. When an album is
being played, its title is shaded.
3( 30)
Press X/x to select an album.
x When selecting an album
Press H to start playing the selected
album.
x When selecting a track
ROCK BEST HIT
KARAOKE
MY FAVOURITE SONG
R&B
JAZZ
CLASSIC
SALSA OF CUBA
BOSSA NOVA
Press
.
The list of tracks contained in the album
appears.
MY FAVOURITE SONG
1(256)
WALTZ FOR DEBBY
MY ROMANCE
MILES TONES
MY FUNNY VALENTINE
AUTUMN LEAVES
ALL BLUES
S O M E D A Y M Y P R I N C E W ...
Press X/x to select a track and press
.
The selected track starts playing. You can
turn the track list off by pressing DVD
MENU. Pressing DVD MENU again will
display the album list.
48GB
model name [DAV-DZ1000]
[2-895-978-12(1)]
filename[I:\FM E_data\1011_DAVDZ1000_rev\2895978121\2895978121DAVDZ1000\gb08pla.fm]
2
masterpage:Right
specdef v20070110
Press X/x to select an album.
To rotate a JPEG image
x When selecting an album
When a JPEG image file is displayed on the TV
screen, you can rotate the image by 90 degrees.
Press X/x while viewing an image. Each time
you press X, the image rotates counterclockwise
by 90 degrees.
Example of when you press X once:
Press H to start playing the selected
album.
x When selecting an image
Press PICTURE NAVI.
Images of files in the album appear in 16
subscreens.
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Press C/X/x/c to select the image you want
to view and press
.
Press CLEAR to return to normal view.
To stop playback
Press x.
Tip
• A scroll box is displayed at the right side of the TV
screen. To display the additional image files, select
the bottom image and press x. To return to the
previous image, select the top image and press X.
Various Functions for Playing Discs
1
Rotating direction
To play the next or previous JPEG
image file
Press C/c when the Control Menu display is not
displayed. Note that you can select the next
album by continuing to press c after the last
image on the current album, but that you cannot
return to the previous album by pressing C. To
return to the previous album, select the album
from the album list.
49GB
model name [DAV-DZ1000]
[2-895-978-12(1)]
filename[I:\FM E_data\1011_DAVDZ1000_rev\2895978121\2895978121DAVDZ1000\gb08pla.fm]
Playing Audio Tracks and
Images as a Slide Show
with Sound
masterpage:Left
specdef v20070110
7
Press X/x to select the album you want
and press H.
The system starts playing the selected
album.
You can turn the album list on and off by
pressing DVD MENU repeatedly.
Tip
You can play a slide show with sound by first
placing both MP3 and JPEG files in the same
album on a DATA CD or DATA DVD. When
you play back the DATA CD or DATA DVD,
select [AUTO] mode as explained below.
1
2
Load a DATA CD or DATA DVD.
Press
DISPLAY when the system is
in stop mode.
The Control Menu display appears.
3
Press X/x to select
(MP3, JPEG)], then press
[MODE
.
The options for [MODE (MP3, JPEG)]
appear.
12(27)
18(34)
T
1:32:55
DATA CD MP3
AUTO
AUTO
AUDIO (MP3)
IMAGE (JPEG)
• When you select [AUTO], the system can recognize
up to 300 MP3 tracks and 300 JPEG files in a single
album. When you select [AUDIO (MP3)] or [IMAGE
(JPEG)], the system can recognize up to 600 MP3 or
600 JPEG files in a single album. A maximum of 200
albums can be recognized regardless of the selected
mode.
Note
• If you set [MODE (MP3, JPEG)] to [IMAGE
(JPEG)] on a disc that contains MP3 tracks only or
[AUDIO (MP3)] on a disc that contains JPEG files
only, you may not be able to change the [MODE
(MP3, JPEG)] setting.
• PICTURE NAVI does not work when [AUDIO
(MP3)] is selected.
• If you play large MP3 track data and JPEG image
data at the same time, the sound may skip. It is
recommended that you set the MP3 bit rate to 128
kbps or lower when creating the file. If the sound still
skips, then reduce the size of the JPEG file.
Specifying the slide show
duration
(JPEG only)
4
Press X/x to select a setting.
The default setting is underlined.
• [AUTO]: plays both the JPEG image files
and MP3 audio tracks in the same album
as a slide show.
• [AUDIO (MP3)]: plays only MP3 audio
tracks continuously.
• [IMAGE (JPEG)]: plays only JPEG
image files as a slide show.
5
6
Press
.
Press DVD MENU.
The list of albums recorded on the DATA
CD or DATA DVD appears.
When you play JPEG image files using slide
show, you can specify the duration for slides to
appear on the TV screen.
1
Press
DISPLAY twice.
The Control Menu display appears.
2
Press X/x to select
[INTERVAL], then press
.
The options for [INTERVAL] appear.
3 ( 12)
4)
1(
2007/10/29
NORMAL
NORMAL
FAST
SLOW1
SLOW2
DATA CD JPEG
50GB
model name [DAV-DZ1000]
[2-895-978-12(1)]
filename[I:\FM E_data\1011_DAVDZ1000_rev\2895978121\2895978121DAVDZ1000\gb08pla.fm]
3
Press X/x to select a setting.
masterpage:Right
specdef v20070110
3
The default setting is underlined.
• [NORMAL]: sets the duration to about 6
to 9 seconds.
• [FAST]: sets the duration shorter than
[NORMAL].
• [SLOW1]: sets the duration longer than
[NORMAL].
• [SLOW2]: sets the duration longer than
[SLOW1].
4
Press
.
4
Press
.
Selecting an effect for image
files in the slide show
(JPEG only)
When you play a JPEG image file, you can
select the effect to be used when viewing the
slide show.
1
Press
DISPLAY twice.
The Control Menu display appears.
2
Press X/x to select
then press
.
Various Functions for Playing Discs
The default setting is underlined.
• [MODE1]: The image sweeps in from top
to bottom.
• [MODE2]: The image stretches out from
left to right of the TV screen.
• [MODE3]: The image stretches out from
the center of the TV screen.
• [MODE4]: The images randomly cycle
through the effects.
• [MODE5]: The next image slides over the
previous image.
• [OFF]: turns off this function.
Note
• Some JPEG files may take longer to display than
others, which may make the duration seems longer
than the option you selected. Especially progressive
JPEG files or JPEG files of 3,000,000 pixels or more.
Press X/x to select a setting.
[EFFECT],
The options for [EFFECT] appear.
3 ( 12)
4)
1(
2007/10/23
DATA CD JPEG
MODE1
MODE1
MODE2
MODE3
MODE4
MODE5
OFF
51GB
model name [DAV-DZ1000]
[2-895-978-12(1)]
filename[I:\FM E_data\1011_DAVDZ1000_rev\2895978121\2895978121DAVDZ1000\gb08pla.fm]
Enjoying DivX® Videos
masterpage:Left
specdef v20070110
files with the extension “.AVI” or “.DIVX” if
they do not contain a DivX video.
Tip
About DivX Video Files
DivX® is a video file compression technology,
developed by DivX, Inc. This product is an
official DivX® Certified product.
You can play DATA CDs and DATA DVDs that
contain DivX® video files.
DATA CDs and DATA DVDs that
the system can play
Playback of DATA CDs (CD-ROMs/CD-Rs/
CD-RWs) and DATA DVDs (DVD-ROMs/
DVD-Rs/DVD-RWs/DVD+Rs/DVD+RWs) on
this system is subject to certain conditions:
– With DATA CDs/DATA DVDs that contain
DivX video files in addition to MP3 audio
tracks or JPEG image files, the system plays
only the DivX video files.
However, this system only plays DATA CDs
whose logical format is ISO 9660 Level 1/Level
2 or Joliet, and DATA DVDs of Universal Disk
Format (UDF).
Refer to the operating instructions supplied with
the disc drives and the recording software (not
supplied) for details on the recording format.
• For details about playable MP3 audio tracks or JPEG
image files on DATA CDs or DATA DVDs, see
“Discs that the system can play” (page 46).
Note
• The system may not play a DivX video file when the
file has been combined from two or more DivX video
files.
• The system cannot play a DivX video file of size
more than 720 (width) × 576 (height) or 2GB.
• Depending on the DivX video file, sound may skip or
not match the pictures on the TV screen.
• The system cannot play some DivX video files that
are longer than 3 hours.
• Depending on the DivX video file, the picture may
pause or be unclear. In which case, it is recommended
that you create the file at a lower bit rate. If the sound
is still noisy, MP3 is the recommended audio format.
Note, however, this system does not conform to
WMA (Windows Media Audio) format.
• Because of the compression technology used for
DivX video files, it may take some time after you
press H for the picture to appear.
Selecting an album
1
A list of albums on the disc appears. Only
albums that contain DivX video files are
listed.
About playback order of data on
DATA CDs or DATA DVDs
See “Playback order of MP3 audio tracks or
JPEG image files” (page 47). Note that the
playback order may not be applicable,
depending on the software used for creating the
DivX video file, or if there are more than 200
albums and 600 DivX video files in each album.
Note
• The system may not be able to play some DATA
CDs/DATA DVDs created in the Packet Write
format.
DivX video files that the system
can play
The system can play data that is recorded in
DivX format, and which has the extension
“.AVI,” or “.DIVX.” The system will not play
Press DVD MENU.
3( 3)
SUMMER 2003
NEW YEAR'S DAY
MY FAVOURITES
2
3
Press X/x to select the album you want
to play.
Press H.
The system starts playing the selected
album.
To select DivX video files, see “Selecting a
DivX video file” (page 53).
52GB
model name [DAV-DZ1000]
[2-895-978-12(1)]
filename[I:\FM E_data\1011_DAVDZ1000_rev\2895978121\2895978121DAVDZ1000\gb08pla.fm]
masterpage:Right
specdef v20070110
To go to the next or previous
page
Tip
• If the number of viewing times is preset, you can play
the DivX video files as many times as the preset
number. The following occurrences are counted:
– when the system is turned off.
– when another file is played.
– when the disc tray is opened.
Press C/c.
To turn off the display
Press DVD MENU repeatedly.
To stop playback
Press x.
Selecting a DivX video file
1
Various Functions for Playing Discs
After Step 2 of “Selecting an album,”
press
.
The list of files in the album appears.
MY FAVOURITES
1(2 )
HAWAII 2004
VENUS
2
Press X/x to select a file and press
.
The selected file starts playing.
To go to the next or previous
page
Press C/c.
To return to the previous display
Press O RETURN.
To stop playback
Press x.
To play the next or previous DivX
video file without turning on the
above file list
You can select the next or previous DivX video
file in the same album by pressing ./>.
You can also select the first file of the next
album by pressing > during playback of the
last file of the current album. Note that you
cannot return to the previous album by pressing
.. To return to the previous album, select it
from the album list.
53GB
model name [DAV-DZ1000]
[2-895-978-12(1)]
filename[I:\FM E_data\1011_DAVDZ1000_rev\2895978121\2895978121DAVDZ1000\gb08pla.fm]
masterpage:Left
specdef v20070110
Playing VIDEO CDs with
PBC Functions (Ver.2.0)
(PBC Playback)
With PBC (Playback Control) functions, you
can enjoy simple interactive operations, search
functions, and other such operations.
PBC playback allows you to play VIDEO CDs
interactively by following the menu on the TV
screen.
1
Start playing a VIDEO CD with PBC
functions.
The menu for your selection appears.
2
3
4
Select the item number you want by the
number buttons.
Press
.
Follow the instructions in the menu for
interactive operations.
Refer to the operating instructions supplied
with the disc, as the operating procedure
may differ depending on the VIDEO CD.
To go back to the menu
Press O RETURN.
Note
• Depending on the VIDEO CD, [Press ENTER] in
Step 3 may appear as [Press SELECT] in the
operating instructions supplied with the disc. In this
case, press H.
Tip
• To play without using PBC, press ./> or the
number buttons while the system is in stop mode to
select a track, then press H or
. The system starts
continuous play. You cannot play still pictures such
as a menu. To return to PBC playback, press x twice,
then press H.
54GB
model name [DAV-DZ1000]
[2-895-978-12(1)]
filename[I:\FM E_data\1011_DAVDZ1000_rev\2895978121\2895978121DAVDZ1000\gb09rad.fm]
masterpage:Right
specdef v20070110
To change the preset number
Tuner Functions
Presetting Radio Stations
You can preset 20 FM stations, and 10 AM
stations. Before tuning, make sure to turn down
the volume to minimum.
1
2
Press FUNCTION +/– repeatedly until
“TUNER FM” or “TUNER AM” appears
in the front panel display.
Press and hold TUNING + or – until the
auto scanning starts.
3
4
5
To change the AM tuning interval
(except for Russian and Middle
Eastern models)
The AM tuning interval can be set to either
10 kHz or 9 kHz.
To change the AM tuning interval, first tune in
any AM station, then turn off the system by
pressing "/1 on the unit. While holding down
> on the unit, press "/1 on the unit to turn on
the power. If you change the interval, AM preset
stations will be erased.
To reset the interval, repeat the same procedure.
Tuner Functions
Scanning stops when the system tunes in a
station. “TUNED” and “ST” (for stereo
program) appear in the front panel display.
Restart from Step 1.
Press SYSTEM MENU.
Press X/x repeatedly until “MEMORY”
appears in the front panel display.
or c.
Press
A preset number appears in the front panel
display.
6
Press X/x to select the preset number
you want.
Tip
• You can select the preset number directly by
pressing the number buttons.
7
Press
.
The station is stored.
8
9
Repeat Steps 1 to 7 to store other
stations.
Press SYSTEM MENU.
The system menu turns off.
55GB
model name [DAV-DZ1000]
[2-895-978-12(1)]
filename[I:\FM E_data\1011_DAVDZ1000_rev\2895978121\2895978121DAVDZ1000\gb09rad.fm]
Listening to the Radio
Preset radio stations in the system’s memory
first (see “Presetting Radio Stations” (page 55)).
1
Press FUNCTION +/– repeatedly until
“TUNER FM” or “TUNER AM” appears
in the front panel display.
masterpage:Left
specdef v20070110
If an FM program is noisy
If an FM program is noisy, you can select
monaural reception. There will be no stereo
effect, but reception will improve.
1
2
Press SYSTEM MENU.
Press X/x repeatedly until “FM MODE”
appears in the front panel display.
The last received station is tuned in.
2
Press PRESET + or – repeatedly to
select the preset station.
Each time you press the button, the system
tunes in one preset station.
3
4
• You can select the preset station number directly
by pressing the number buttons.
Adjust the volume by pressing
VOLUME +/–.
To turn off the radio
5
Use manual or automatic tuning in Step 2.
For manual tuning, press TUNING + or –
repeatedly.
For automatic tuning, press and hold TUNING +
or –. The automatic tuning stops automatically
when the system receives the radio station. To
stop the automatic tuning manually, press
TUNING + or –.
To listen to radio stations when
you know the frequencies
6
Press SYSTEM MENU.
Naming preset stations
You can enter a name for preset stations. These
names (for example, “XYZ”) appear in the front
panel display when a station is selected.
Note that no more than one name can be entered
for each preset station.
1
Press D.TUNING.
Press the number buttons to select the
frequencies.
Press FUNCTION +/– repeatedly until
“TUNER FM” or “TUNER AM” appears
in the front panel display.
The last received station is tuned in.
2
Use direct tuning in Step 2.
Press
.
The system menu turns off.
To listen to non-preset radio
stations
3
Press
The setting is made.
Press "/1.
1
2
Press X/x to select “MONO.”
The default setting is underlined.
• “STEREO”: stereo reception.
• “MONO”: monaural reception.
Tip
3
or c.
Press
3
4
.
Press PRESET + or – repeatedly to
select the preset station you want to
create an index name for.
Press SYSTEM MENU.
Press X/x repeatedly until “NAME IN”
appears in the front panel display.
Tip
• To improve reception, reorient the supplied antennas
(aerials).
5
Press
or c.
56GB
model name [DAV-DZ1000]
[2-895-978-12(1)]
filename[I:\FM E_data\1011_DAVDZ1000_rev\2895978121\2895978121DAVDZ1000\gb09rad.fm]
6
masterpage:Right
specdef v20070110
Create a name by using the cursor
buttons.
Press X/x to select a character, then press c
to move the cursor to the next position.
Letters, numbers, and other symbols can be
input for a radio station.
If you make a mistake
Press C/c repeatedly until the character to
be changed flashes, then press X/x to select
the desired character.
To erase the character, press C/c
repeatedly until the character to be erased
flashes, then press CLEAR.
7
Press
.
8
Tuner Functions
“COMPLETE” appears in the front panel
display, and the station name is stored.
Press SYSTEM MENU.
The system menu turns off.
Tip
• You can check the frequency by pressing DISPLAY
repeatedly (page 57).
Viewing the station name or
frequency in the front panel
display
When the system is set to “TUNER FM” or
“TUNER AM,” you can check the frequency
using the front panel display.
Press DISPLAY.
Each time you press DISPLAY, the display
changes as shown.
1 Station name*
2 Frequency**
* This is displayed if you have entered a name for a
preset station.
** Returns to the original display when several seconds
has elapsed.
57GB
model name [DAV-DZ1000]
[2-895-978-12(1)]
filename[I:\FM E_data\1011_DAVDZ1000_rev\2895978121\2895978121DAVDZ1000\gb10oth.fm]
Other Operations
Controlling the TV with the
Supplied Remote
By adjusting the remote signal, you can control
your TV with the supplied remote.
masterpage:Left
specdef v20070110
Manufacturer
Code number
RCA/PROSCAN
503, 510, 544
SAMSUNG
515, 517, 544, 557, 566, 569,
574
SANYO
508, 545, 567
SHARP
517, 535, 565
TELEFUNKEN/
SABA
530, 537, 547, 549, 558
THOMSON
530, 537, 547, 549
Note
TOSHIBA
535, 541, 551
• When you replace the batteries of the remote, the
code number may reset itself to the default (SONY)
setting. Reset the appropriate code number.
ZENITH
543, 567
CATV
Manufacturer
Code number
Controlling TVs with the
remote
SONY
821, 824, 825
HAMLIN/REGAL
836, 837, 838, 839, 840
Press and hold TV [/1 while entering your
TV’s manufacturer’s code (see the table)
using the number buttons. Then release TV
[/1.
JERROLD
830, 831
JERROLD/GI
806, 807, 808, 809, 810, 811,
812, 813, 814
OAK
841, 842, 843
If you set successfully the manufacturer’s code,
the TV button flashes twice slowly. If the setting
is unsuccessful, the TV button flashes five times
quickly.
PANASONIC
816, 826, 832, 833, 834, 835
PIONEER
828, 829
SCIENTIFIC
ATLANTA
815, 816, 817, 844
Code numbers of controllable TVs
TOCOM/PHILIPS
830, 831
ZENITH
826, 827
If more than one code number is listed, try
entering them one at a time until you find the one
that works with your TV.
To control the TV
You can control the TV by using following
buttons.
TV
Manufacturer
Code number
SONY/AIWA
501 (default)
DAEWOO
503, 506, 515, 544
FISHER
508, 545
By pressing
You can
TV [/1
Turn the TV on or off.
TV INPUT
Switch the TV’s input source
between the TV and other input
sources.
GRUNDIG
533
HITACHI
503, 514, 515, 517, 544, 557
TV VOL +/–*
Adjust the TV volume.
ITT/NOKIA
521, 522
TV CH +/–*
Select the TV channel.
JVC
516
Select the TV channel.
LG/GOLDSTAR
503, 515, 517, 544, 568
LOEWE
515
Number
buttons*,
ENTER*
MAGNAVOX
503, 515, 517, 518, 544, 566
TOOLS*
Displays the operation menu for
the current display.
RETURN*
Return to the previous channel or
layer on the menu of the TV.
TV MENU*
Display the menu of the TV.
MITSUBISHI/MGA 503, 527, 544, 566, 568
PANASONIC
509, 553, 572
PHILIPS
518, 557, 558
PIONEER
509, 525, 551
58GB
model name [DAV-DZ1000]
[2-895-978-12(1)]
filename[I:\FM E_data\1011_DAVDZ1000_rev\2895978121\2895978121DAVDZ1000\gb10oth.fm]
By pressing
You can
MUTING*
Turn off the TV sound
temporarily.
C/X/x/c*,
*
Select the item on the menu.
* To use these buttons while in the TV mode (the TV
button lights up), press the TV button.
- is for selecting a channel number greater than
10. (For example, for channel 25, press -, then
2 and 5.)
Note
• Depending on the TV, you may not be able to control
your TV or to use some of the buttons above.
• The TV mode turns off when you do not operate the
remote for 10 seconds.
masterpage:Right
specdef v20070110
Using the THEATRE SYNC
Function
THEATRE SYNC allows you to turn on your
Sony TV and this system, changes the system
mode to “DVD,” and then switches the TV’s
input source you set with one button push.
Preparing for the THEATRE
SYNC function
Register the TV’s input source connected to this
system.
The TV’s input source is selected.
If you successfully set the TV’s input source
code, the TV button flashes twice slowly. If the
setting is unsuccessful, the TV button flashes
five times quickly.
Set your TV’s input to the input you used to
connect the unit. For details, see the operating
instructions of your TV.
By pressing Number
TV’s input source
TV INPUT
0
No input source
(Default)
1
VIDEO1
2
VIDEO2
3
VIDEO3
4
VIDEO4
5
VIDEO5
6
VIDEO6
7
VIDEO7
8
VIDEO8
9*
COMPONENT 1
CLEAR*
COMPONENT 2
PICTURE
NAVI*
COMPONENT 3
AUDIO*
COMPONENT 4
Other Operations
Press and hold TV INPUT while entering the
code for the TV’s input source connected
to this unit (see the table) using the number
buttons.
SUBTITLE* HDMI 1
ANGLE*
HDMI 2
VIDEO
FORMAT*
HDMI 3
continued
59GB
model name [DAV-DZ1000]
[2-895-978-12(1)]
filename[I:\FM E_data\1011_DAVDZ1000_rev\2895978121\2895978121DAVDZ1000\gb10oth.fm]
By pressing Number
masterpage:Left
specdef v20070110
TV’s input source
MOVIE/
MUSIC*
HDMI 4
DYNAMIC
BASS*
HDMI 5
* Except for North American models.
Operating the THEATRE SYNC
function
Point the remote to the direction of TV and this
unit, then press THEATRE SYNC once.
Enjoying Karaoke
You can enjoy karaoke (singing along with a
disc) by setting the system to karaoke mode.
You can connect two microphones (not
supplied)* to the unit.
Karaoke mode allows you to play any source
using only the front left and right speakers and
subwoofer.
While transmitting the code from the remote, the
TV button flashes.
If this function does not work, change the
transmit time. The transmit time varies
depending on the TV.
* Only Russian models, supplied with one
microphone.
To change the transmit time
1
Press and hold TV CH +* while entering the
code for transmit time (see the table) using
the number buttons.
Setting the system to karaoke
mode
2
The transmit time from the remote is selected.
If you successfully set the transmit time code,
the TV button flashes twice slowly. If the setting
is unsuccessful, the TV button flashes five times
quickly.
Press FUNCTION +/– repeatedly until
“DVD” appears in the front panel
display.
Plug a microphone into the MIC 1 or
MIC 2 jack.
* Functions as both TV CH + and SOUND FIELD +
button.
By pressing Number
Transmit time
TV CH +
1
0.5 (Default)
2
1
3
1.5
4
2
5
3
6
4
7
5
8
6
AUDIO IN / MIC 1 /
A.CAL MIC
MIC 2
The system enters karaoke mode.
“
” lights up in the front panel display.
3
Start playing the music.
Microphone sound is output with DVD
function.
To cancel karaoke mode
Note
• This function is only for Sony TVs. (This function
may not work on some Sony TVs.)
• If distance between TV and this unit is too far, this
function may not work. Install the unit near the TV.
• Keep the remote pointed in the direction of the TV
and this unit while the TV button is flashing.
• Keep the remote pointed in the direction of the TV
and this unit while entering the code.
Disconnect the microphones.
To set the system to karaoke
mode on the Control Menu
display
1
Press
DISPLAY.
The Control Menu display appears.
60GB
model name [DAV-DZ1000]
[2-895-978-12(1)]
filename[I:\FM E_data\1011_DAVDZ1000_rev\2895978121\2895978121DAVDZ1000\gb10oth.fm]
2
3
masterpage:Right
specdef v20070110
Note
Note
• The Control Menu display has 2 pages.
Depending on the source, press
DISPLAY
twice to select [KARAOKE MODE].
• If howling occurs:
– move the microphone away from the speakers.
– lower the microphone volume or echo level.
– lower the overall volume.
Press X/x repeatedly to select
[KARAOKE MODE], then press
.
The options for [KARAOKE MODE] appear.
Dolby Digital Karaoke format
Press X/x repeatedly to select [ON], then
press
.
(DVD only)
The system enters karaoke mode.
To cancel karaoke mode, select [OFF].
Note
Speaker output in normal Dolby
Digital format (5 channel
surround)
Front speaker
(L)
Front speaker
(R)
Center
speaker
Other Operations
• Microphone sound may drop when changing discs.
• Before connecting, press MIC VOL – to set the
microphone volume to minimum.
• You cannot change the sound field during karaoke
mode.
• In karaoke mode, the overall volume may drop.
• If you set [TEST TONE] to [ON] (page 82) during
the karaoke mode, the karaoke mode is set to off
automatically.
• Microphone sound is not output when:
– the microphone is not connected to the unit
properly.
– the microphone volume is set to minimum.
Dolby Digital format, which reproduces
surround sound using 5 channels, can also
contain the “Dolby Digital Karaoke” format
which is specialized for karaoke. In the Dolby
Digital Karaoke format discs, guide melody and
guide vocal tracks are recorded in addition to the
accompaniment. You can select them when the
system is in karaoke mode.
Tip
• The karaoke play is performed with the audio channel
you selected using AUDIO (page 39).
Adjusting the microphone
You can adjust the microphone volume and
level of the echo effect.
To adjust the microphone volume
Press MIC VOL +/– to adjust the
microphone volume.
To add the echo effect
Press ECHO.
Each time you press ECHO, the echo level
changes as follows:
ECHO OFF t ECHO 1
R
r
ECHO 3 T ECHO 2
To cancel the echo effect, select “ECHO OFF.”
Surround
speaker (L)
Surround
speaker (R)
Speaker output in Dolby Digital
Karaoke format
Accompaniment
Accompaniment
Front
(L)
Front
(R)
Center
Guide melody
Surround
(L)
Guide vocal 1
Surround
(R)
Guide vocal 2
You can select any of these. These are output
from the respective speakers.
continued
61GB
model name [DAV-DZ1000]
[2-895-978-12(1)]
filename[I:\FM E_data\1011_DAVDZ1000_rev\2895978121\2895978121DAVDZ1000\gb10oth.fm]
You can check the audio information by
pressing AUDIO (page 39). When playing a
Dolby Digital Karaoke disc, “ ” appears at the
current audio format.
Example:
masterpage:Left
specdef v20070110
Playing karaoke with any
stereo disc (Karaoke Pon)
You can enjoy karaoke with a stereo-recorded
disc, even if it is a non-karaoke disc, by reducing
the sound of the vocals.
Press KARAOKE PON in karaoke mode.
1:ENGLISH DOLBY DIGITAL 3 / 2
2/0: Recorded only with
accompaniment.
3/0: Recorded with guide
melody.
3/1: Recorded with guide melody
and one guide vocal.
3/2: Recorded with guide melody
and two guide vocals.
Changing the key of a song
(Key Control)
You can change the key to suit your vocal range,
except when the system is in stop mode.
Press KEY CON # or 2 to suit your vocal
range in karaoke mode.
You can adjust the key higher or lower in
13 steps (26 – #6).
Note
• Depending on the discs, you may not be able to
change the key.
• The key automatically returns to the original key
when:
– you turn off the power.
– you change the function.
– the disc tray is opened.
– you stop playback.
– the title or track changes.
– you change the album.
– the play item is changed during PBC playback.
– you perform Scan Play.
– you cancel karaoke mode.
• This function does not affect TV sound if the system
and TV are connected with the HDMI cord and
system sound is output from the TV.
To cancel Karaoke Pon mode
Press KARAOKE PON again.
Note
• This function may not work well in the following
cases:
– Only a few instruments are playing
– A duet is playing
– The vocals on the disc deviate from the center
– Monaural-recorded discs (the accompaniment is
also reduced)
– Multiplex
• During Karaoke Pon mode, the stereo effect is
reduced.
• Karaoke Pon mode is automatically canceled when:
– you turn off the power.
– you change the function.
– the disc tray is opened.
– AUDIO stream is changed.
– you set [VOCAL SELECT] to other than [OFF].
– you cancel karaoke mode.
• This function does not affect TV sound if the system
and TV are connected with the HDMI cord and
system sound is output from the TV.
Selecting the vocals (Vocal
Select)
(DVD VIDEO, VIDEO CD, CD only)
When playing a DVD with the Dolby Digital
Karaoke format in karaoke mode, you can turn
on or off the guide vocal recorded in the karaoke
track.
When playing a VIDEO CD/CD in karaoke
mode, you can listen to the vocals.
You can also change the guide vocal channel.
You can select different kinds of vocals.
1
Press
mode.
DISPLAY twice in karaoke
The Control Menu display for karaoke
mode appears.
62GB
model name [DAV-DZ1000]
[2-895-978-12(1)]
filename[I:\FM E_data\1011_DAVDZ1000_rev\2895978121\2895978121DAVDZ1000\gb10oth.fm]
2
Press X/x repeatedly to select
[VOCAL SELECT], then press
.
The options for [VOCAL SELECT] appear.
3
Press X/x repeatedly to select the
desired vocal channel.
The output channel changes as follows. The
default settings are underlined.
x When playing a DVD VIDEO
•
•
•
•
masterpage:Right
specdef v20070110
Selecting the scoring mode
(Score Mode)
When karaoke mode is turned on, you can use
the scoring mode.
Your score is calculated by comparing your
voice with the music source.
1
• [OFF]: The guide vocal is canceled.
• [L+R]: Same sound is output from both
speakers.
• [STEREO]: The standard stereo sound
Note
• The Control Menu display has 2 pages.
Depending on the source, press
DISPLAY
twice to select [SCORE MODE].
2
3
Press
.
The default settings are underlined.
• [EASY]: Beginner or Intermediate level.
• [NORMAL]: Advance or professional
level.
• [DEMO]: Demonstration mode.
Consistently displays a high score for
every song.
4
5
6
Note
• When playing a DVD VIDEO, the function works
only with the Dolby Digital Karaoke format.
• Depending on the discs, you may not be able to
change the guide vocal channel.
• The channel returns to the default setting when:
– you turn off the power.
– you change the functions.
– the disc tray is opened.
– AUDIO stream is changed.
– you cancel karaoke mode.
– you set karaoke pon mode to on.
• When playing a DVD VIDEO recorded only with one
kind of guide vocal, select [1].
• This function does not affect TV sound if the system
and TV are connected with the HDMI cord and
system sound is output from the TV.
Press X/x repeatedly to select a
setting.
Press
Other Operations
4
Press X/x repeatedly to select
[SCORE MODE], then press
.
The options for [SCORE MODE] appear.
x When playing a Super VCD
• [OFF]: The guide vocal is canceled.
• [1:L+R]: Same sound of the audio track 1
is output from both speakers.
• [1:STEREO]: The stereo sound of the
audio track 1
• [2:L+R]: Same sound of the audio track 2
is output from both speakers.
• [2:STEREO]: The stereo sound of the
audio track 2
DISPLAY.
The Control Menu display appears.
[OFF]: The guide vocal is canceled.
[1+2]: Guide vocal 1+2
[1]: Guide vocal 1
[2]: Guide vocal 2
x When playing a VIDEO CD/CD
Press
.
Start playing the music.
Press SCORE before singing a song in
karaoke mode.
The previous highest score appears on the
TV screen.
7
After singing for more than a minute,
press SCORE again to view your score.
Your score is calculated from a scale of
0 to 99.
Your score is displayed for five seconds,
during which time the system enters pause
mode.
Note
• The highest score is reset when the system is turned
off.
• The score mode function may be canceled when
certain remote buttons are pressed.
• In some cases, you may not be able to use the scoring
mode.
continued
63GB
model name [DAV-DZ1000]
[2-895-978-12(1)]
filename[I:\FM E_data\1011_DAVDZ1000_rev\2895978121\2895978121DAVDZ1000\gb10oth.fm]
Tip
• The [SCORE MODE] setting is automatically
changed to [EASY] when the system is turned off.
masterpage:Left
specdef v20070110
Using the Sound Effect
Reinforcing bass frequencies
You can reinforce bass frequencies.
Press DYNAMIC BASS.
Bass frequencies are effectively reinforced.
To turn off the sound effect
Press DYNAMIC BASS again.
64GB
model name [DAV-DZ1000]
[2-895-978-12(1)]
filename[I:\FM E_data\1011_DAVDZ1000_rev\2895978121\2895978121DAVDZ1000\gb10oth.fm]
Using the Sleep Timer
You can set the system to turn off at a preset
time, so you can fall asleep listening to music.
You can preset the time in 1 or 10-minutes
increments.
masterpage:Right
specdef v20070110
4
Press
.
The setting is made and “SLEEP” lights up in
the front panel display.
5
Press SYSTEM MENU.
The system menu turns off.
Press SLEEP.
Each time you press this button, the minutes
display (the remaining time) changes as follows:
SLEEP 90M t SLEEP 80M t SLEEP 70M
R
r
SLEEP OFF T SLEEP 10M ..... SLEEP 60M
When you set the sleep timer, “SLEEP” lights
up in the front panel display.
To check the remaining time
Other Operations
Press SLEEP once.
To change the remaining time
Press SLEEP repeatedly to select the desired
time.
To cancel the sleep timer
function
Press SLEEP repeatedly until “SLEEP OFF”
appears in the front panel display.
To set the sleep timer using the
system menu
1
2
Press SYSTEM MENU.
3
Press X/x to select a setting.
Press X/x repeatedly until “SLEEP” appears
in the front panel display, then press
or
c.
The minutes display (the remaining time)
changes as follows:
SLEEP 90M y SLEEP 80M y SLEEP 70M
Y
Y
SLEEP OFF y SLEEP 10M ..... SLEEP 60M
Tip
• You can select the remaining time by pressing
the number buttons. In this case, you can preset
the time in 1-minute increments.
65GB
model name [DAV-DZ1000]
[2-895-978-12(1)]
filename[I:\FM E_data\1011_DAVDZ1000_rev\2895978121\2895978121DAVDZ1000\gb10oth.fm]
Changing the Brightness
of the Front Panel Display
The brightness of the front panel display can be
set to either of 2 levels.
1
2
3
Press SYSTEM MENU.
Press X/x repeatedly until “DIMMER”
appears in the front panel display, then
press
or c.
Press X/x to select the brightness of
the front panel display.
The default setting is underlined.
• “DIMMER OFF”: Bright.
• “DIMMER ON”: The front panel display
becomes dark.
4
Press
.
The setting is made.
5
Press SYSTEM MENU.
The system menu turns off.
masterpage:Left
specdef v20070110
Using the DIGITAL MEDIA
PORT Adapter
(Except for Mexican and Latin
American models)
The DIGITAL MEDIA PORT (DMPORT)
adapter is for enjoying sound from a portable
audio source or computer. By connecting a
DIGITAL MEDIA PORT adapter, you can
enjoy sound from the connected component on
the system.
Available DIGITAL MEDIA PORT adapters
vary in each area.
For details on connecting the DIGITAL MEDIA
PORT adapter, see “Connecting Other
Components” (page 23).
Note
• Do not connect an adaptor other than the DIGITAL
MEDIA PORT adapter.
• Do not connect or disconnect the DIGITAL MEDIA
PORT adapter to/from the unit while the system is
turned on.
• Depending on the type of DIGITAL MEDIA PORT
adapter (not supplied), the images are also output. In
this case, the system outputs the composite video
signal only regardless of the type of video signal.
Playing the connected
component on the system
1
2
Press FUNCTION +/– repeatedly until
“DMPORT” appears in the front panel
display.
Start playback of the connected
component.
The sound and images from the connected
component are played on the system or
connected TV.
For operation details, see the operating
instructions of the DIGITAL MEDIA
PORT adapter (not supplied).
Tip
• When listening to MP3 or other compressed music
using a portable audio source, you can enhance the
sound. Press SOUND FIELD +/– repeatedly until
“A.F.D. STD” appears in the front panel display. To
cancel, select other than “A.F.D. STD.”
66GB
model name [DAV-DZ1000]
[2-895-978-12(1)]
filename[I:\FM E_data\1011_DAVDZ1000_rev\2895978121\2895978121DAVDZ1000\gb10oth.fm]
Note
• Depending on the type of DIGITAL MEDIA PORT
adapter (not supplied), you may be able to operate a
connected component using either the buttons on the
remote or the unit. The following illustration shows
an example of buttons that can be used in this case.
masterpage:Right
specdef v20070110
Deactivating the Buttons
on the Unit
(Child Lock)
You can deactivate the buttons on the unit
(except for "/1) for preventing misoperation,
such as child mischief (child lock function).
When the child lock function is activated, the
buttons on the unit are locked and “
” lights
up in the front panel display. (You can operate
the system by using the remote.)
Note
./>
1
2
3
Press SYSTEM MENU.
Press X/x repeatedly until “CHILD
LOCK” appears in the front panel
display, then press
or c.
Press X/x to select a setting.
The default setting is underlined.
• “OFF”: Child lock function off.
• “ON”: Child lock function on.
4
Press
Other Operations
X
H
x
• When you operate the buttons on the unit while the
child lock function is on, “CHILD LOCK” appears in
the front panel display.
.
The setting is made.
5
Press SYSTEM MENU.
The system menu turns off.
Tip
• You can activate the child lock function by pressing
x for more than 5 seconds (“
” lights up in the
front panel display).
To cancel, press x for more than 5 seconds so that
“
” disappears from the front panel display.
67GB
model name [DAV-DZ1000]
[2-895-978-12(1)]
filename[I:\FM E_data\1011_DAVDZ1000_rev\2895978121\2895978121DAVDZ1000\gb11adv.fm]
masterpage:Left
specdef v20070110
4
Advanced Settings and Adjustments
Press X/x to select [ON t], then press
.
x If you have not entered a password
The display for registering a new password
appears.
Locking Discs
(CUSTOM PARENTAL CONTROL,
PARENTAL CONTROL)
PARENTAL CONTROL
Enter a new 4-digit password,
then press ENTER .
You can set two kinds of playback restrictions
for the desired disc.
• Custom Parental Control
You can set playback restrictions so that the
system will not play inappropriate discs.
• Parental Control
Playback of some DVD VIDEOs can be
limited according to a predetermined level
such as the age of the users. Scenes may be
blocked or replaced with different scenes.
The same password is used for both Custom
Parental Control and Parental Control.
Enter a 4-digit password using the number
buttons, then press .
The display for confirming the password
appears.
x When you have already registered a
password
The display for entering the password
appears.
Preventing playback of
specific discs [CUSTOM
PARENTAL CONTROL]
PARENTAL CONTROL
Enter password, then press
ENTER
.
You can set the same Custom Parental Control
password for up to 40 discs. When you set the
41st-disc, the first disc is canceled.
1
Insert the disc you want to lock.
If the disc is playing, press x to stop
playback.
2
5
Press
DISPLAY while the system is
in stop mode.
[Custom parental control is set.] appears
and the TV screen returns to the Control
Menu display.
The Control Menu display appears.
3
Enter or re-enter your 4-digit password
using the number buttons, then press
.
Press X/x to select
[PARENTAL CONTROL], then press
.
To turn off the Custom Parental
Control function
The options for [PARENTAL CONTROL]
appear.
1
Follow steps 1 through 3 of “Preventing
playback of specific discs [CUSTOM
PARENTAL CONTROL].”
2
Press X/x to select [OFF t], then press
.
3
Enter your 4-digit password using the
number buttons, then press
.
12(27)
18(34)
T
1:32:55
OFF
ON
PLAYER
PASSWORD
DVD VIDEO
68GB
model name [DAV-DZ1000]
[2-895-978-12(1)]
filename[I:\FM E_data\1011_DAVDZ1000_rev\2895978121\2895978121DAVDZ1000\gb11adv.fm]
To play a disc for which Custom
Parental Control is set
1
masterpage:Right
specdef v20070110
2
Insert the disc for which Custom Parental
Control is set.
Press X/x to select
[PARENTAL CONTROL], then press
.
The options for [PARENTAL CONTROL]
appear.
The [CUSTOM PARENTAL CONTROL]
display appears.
12(27)
18(34)
T
1:32:55
DVD VIDEO
CUSTOM PARENTAL CONTROL
OFF
ON
PLAYER
PASSWORD
Custom parental control is already
set. To play, enter your password
and press ENTER .
3
2
Enter your 4-digit password using the
number buttons, then press
.
The system is ready for playback.
Press X/x to select [PLAYER t], then
press
.
x If you have not entered a password
The display for registering a new password
appears.
Tip
Limiting playback for children
[PARENTAL CONTROL]
(DVD only)
Playback of some DVD VIDEOs can be limited
according to a predetermined level such as the
age of the users. The [PARENTAL CONTROL]
function allows you to set a playback limitation
level.
1
Press
DISPLAY while the system is
in stop mode.
PARENTAL CONTROL
Enter a new 4-digit password,
then press ENTER .
Enter a 4-digit password using the number
buttons, then press .
The display for confirming the password
appears.
x When you have already registered a
password
The display for entering the password
appears.
Advanced Settings and Adjustments
• If you forget your password, enter the 6-digit number
“199703” using the number buttons when the
[CUSTOM PARENTAL CONTROL] display asks
you for your password, then press
. The display
will ask you to enter a new 4-digit password.
The Control Menu display appears.
PARENTAL CONTROL
Enter password, then press
ENTER
.
continued
69GB
model name [DAV-DZ1000]
[2-895-978-12(1)]
filename[I:\FM E_data\1011_DAVDZ1000_rev\2895978121\2895978121DAVDZ1000\gb11adv.fm]
4
Enter or re-enter your 4-digit password
using the number buttons, then press
.
masterpage:Left
specdef v20070110
8
Press X/x to select the level you want,
then press
.
Parental Control setting is complete.
The display for setting the playback
limitation level appears.
PARENTAL CONTROL
LEVEL:
STANDARD:
PARENTAL CONTROL
LEVEL:
STANDARD:
4:
PG13
USA
OFF
USA
The lower the value, the stricter the
limitation.
5
Press X/x to select [STANDARD], then
press
.
To turn off the Parental Control
function
The selection items for [STANDARD] are
displayed.
Set [LEVEL] to [OFF] in Step 8.
To play a disc for which Parental
Control is set
PARENTAL CONTROL
LEVEL:
STANDARD:
OFF
USA
USA
OTHERS
1
The display for entering your password
appears.
2
6
Enter your 4-digit password using the
number buttons, then press
.
The system starts playback.
Press X/x to select a geographic area
as the playback limitation level, then
press
.
The area is selected.
When you select [OTHERS t], select and
enter a standard code in the table of
“Parental Control Area Code List”
(page 95) using the number buttons.
7
Insert the disc and press H.
Press X/x to select [LEVEL], then press
.
The selection items for [LEVEL] are
displayed.
PARENTAL CONTROL
LEVEL:
STANDARD:
OFF
OFF
8:
7:
6:
5:
NC17
R
Tip
• If you forget your password, remove the disc and
repeat steps 1 to 3 of “Preventing playback of specific
discs [CUSTOM PARENTAL CONTROL].” When
you are asked to enter your password, enter “199703”
using the number buttons, then press
. The display
will ask you to enter a new 4-digit password. After
you enter a new 4-digit password, replace the disc in
the unit and press H. When the display for entering
your password appears, enter your new password.
Note
• When you play discs which do not have the Parental
Control function, playback cannot be limited on this
system.
• Depending on the disc, you may be asked to change
the parental control level while playing the disc. In
this case, enter your password, then change the level.
If the Resume Play mode is canceled, the level returns
to the previous level.
70GB
model name [DAV-DZ1000]
[2-895-978-12(1)]
filename[I:\FM E_data\1011_DAVDZ1000_rev\2895978121\2895978121DAVDZ1000\gb11adv.fm]
Changing the password
1
Press
DISPLAY while the system is
in stop mode.
The Control Menu display appears.
2
Press X/x to select
[PARENTAL CONTROL], then press
.
The options for [PARENTAL CONTROL]
appear.
3
Press X/x to select [PASSWORD t],
then press
.
The display for entering the password
appears.
4
5
Enter a new 4-digit password using the
number buttons, then press
.
Getting Optimal Surround
Sound for a Room
(SPEAKER FORMATION)
Depending on the shape of the room, there will
be some speakers you cannot install. For the
better surround sound, it is recommended that
first you decide the position of the speakers.
1
2
Press
DISPLAY when the system is
in stop mode.
The Control Menu display appears.
3
To confirm your password, re-enter it
using the number buttons, then press
.
Press X/x to select
FORMATION], then press
1(44)
3(28)
T
0:03:04
SPEAKER FORMATION
SPEAKER FORMATION
AUTO CALIBRATION
If you make a mistake entering
your password
Press C before you press
correct number.
Press FUNCTION +/– repeatedly until
“DVD” appears in the front panel
display.
[SPEAKER
.
DVD VIDEO
and input the
4
Press X/x to select [SPEAKER
FORMATION], then press
.
The options for [SPEAKER
FORMATION] appear.
SPEAKER FORMATION
Advanced Settings and Adjustments
6
Enter your 4-digit password using the
number buttons, then press
.
masterpage:Right
specdef v20070110
STANDARD
continued
71GB
model name [DAV-DZ1000]
[2-895-978-12(1)]
filename[I:\FM E_data\1011_DAVDZ1000_rev\2895978121\2895978121DAVDZ1000\gb11adv.fm]
5
Press C/c to select a setting.
• [STANDARD]: when installing all the
speakers normally.
Note
• When the wireless kit WAHT-SD1 (not
supplied) is installed, [STANDARD
(WIRELESS)] appears instead (except for
Taiwan model).
masterpage:Left
specdef v20070110
• [ALL FRONT]: when installing all the
speakers in front of the listening position.
• [ALL FRONT - NO CENTER]: when
installing the front and surround speakers
in front of the listening position.
• [NO CENTER]: when installing the front
and surround speakers.
• [SECOND ROOM]: when installing the
front speakers in one room and surround
speakers in another.
• [NO SURROUND]: when installing the
center and front speakers.
Note
• Speaker sound in the other room is the same as
that of the front and surround speakers.
• [FRONT ONLY]: when installing the
front speakers.
Tip
• When the wireless kit WAHT-SD1 (not
supplied) is installed, [STANDARD (WIRED)]
appears (except for Taiwan model).
72GB
model name [DAV-DZ1000]
[2-895-978-12(1)]
filename[I:\FM E_data\1011_DAVDZ1000_rev\2895978121\2895978121DAVDZ1000\gb11adv.fm]
6
Press
.
The setting is made.
7
Press X/x to select [YES] or [NO], then
press
.
• [YES]: continue with [AUTO
CALIBRATION], see Step 4 of
“Calibrating the Appropriate Settings
Automatically” (page 73).
• [NO]: exit [SPEAKER FORMATION].
masterpage:Right
specdef v20070110
Calibrating the
Appropriate Settings
Automatically
(AUTO CALIBRATION)
D. C. A. C. (Digital Cinema Auto Calibration)
can set the appropriate surround sound
automatically.
SPEAKER FORMATION
Note
Continue with AUTO CALIBRATION?
YES
NO
Note
1
2
Press FUNCTION +/– repeatedly until
“DVD” appears in the front panel
display.
Press
DISPLAY when the system is
in stop mode.
The Control Menu display appears.
3
Press X/x to select
FORMATION], then press
1(44)
3(28)
T
0:03:04
SPEAKER FORMATION
SPEAKER FORMATION
AUTO CALIBRATION
4
[SPEAKER
.
DVD VIDEO
Press X/x to select [AUTO
CALIBRATION], then press
.
The options for [AUTO CALIBRATION]
appear.
Advanced Settings and Adjustments
• In order to enjoy the surround sound after you change
the position of the speakers, it is recommended you
set [SPEAKER FORMATION], and then set [AUTO
CALIBRATION].
• To set [AUTO CALIBRATION], you need to
connect the supplied calibration mic.
• The front panel display indicates the selected
[SPEAKER FORMATION]. It does not indicate the
speakers which output sound.
• When you change the [CONNECTION] setting in
[SPEAKER SETUP], the [SPEAKER
FORMATION] setting returns to [STANDARD].
• Loud test sound is output when [AUTO
CALIBRATION] starts. You cannot turn the volume
down. Give consideration to children and neighbor.
AUTO CALIBRATION
Connect calibration mic. Start
measurement?
YES
NO
continued
73GB
model name [DAV-DZ1000]
[2-895-978-12(1)]
filename[I:\FM E_data\1011_DAVDZ1000_rev\2895978121\2895978121DAVDZ1000\gb11adv.fm]
masterpage:Left
specdef v20070110
Connect the calibration mic to the A.CAL
MIC jack on the front panel, and set it up at
the ear level using a tripod, etc. (not
supplied). The front of each speaker should
face the calibration mic, and there should be
no obstruction between the speakers and the
calibration mic. Be quiet during the
measurement.
Note
• Avoid being in the measurement area and
making noise during the measurement (about
one minute), to avoid measurement failure.
During the measurement, test signals are output
from the speakers.
• The environment of the room in which the
system is installed may affect measurements.
• If an error message appears, follow the message,
then select [YES].
An error message appears when:
– the calibration mic is not connected.
– front speakers are not correctly connected.
– surround speakers are not correctly
connected.
– front and surround speakers are not correctly
connected.
– subwoofer is not connected.
AUDIO IN / MIC 1 /
A.CAL MIC
Calibration mic
6
Press C/X/x/c to select [YES] or [NO],
then press
.
x The measurement is OK.
Disconnect the calibration mic, then select
[YES]. The result is implemented.
Measurement complete.
FRONT L :
5.00m 0.0dB
FRONT R :
5.00m 0.0dB
CENTER :
5.00m + 1.0dB
SUBWOOFER :
5.00m + 4.0dB
SURROUND L :
3.00m - 2.0dB
SURROUND R :
3.00m - 2.0dB
If OK, unplug calibration mic and select
“YES”.
YES
NO
x The measurement is not OK.
Follow the message, then select [YES] to
retry.
5
Press X/x to select [YES], then press
.
Measurement failure.
Calibration starts.
Check speaker connection.
Retry?
YES
NO
Measuring. Please wait a moment.
Tip
• You can check the distance between the listening
position and each speaker. See page 81.
74GB
model name [DAV-DZ1000]
[2-895-978-12(1)]
filename[I:\FM E_data\1011_DAVDZ1000_rev\2895978121\2895978121DAVDZ1000\gb11adv.fm]
Note
• While the Auto Calibration function works:
– do not turn off the power.
– do not press any button.
– do not change the volume.
– do not change the function.
– do not change the disc.
– do not insert or eject a disc.
– do not disconnect the calibration mic.
masterpage:Right
specdef v20070110
Using the Setup Display
By using the Setup Display, you can make
various adjustments to items such as picture and
sound.
For an overall list of Setup Display items, see
page 103.
Displayed items vary depending on the country
model.
Note
• Playback settings stored in the disc take priority over
the Setup Display settings and not all the functions
described may work.
1
2
Press FUNCTION +/– repeatedly until
“DVD” appears in the front panel
display.
Press
DISPLAY when the system is
in stop mode.
The Control Menu display appears.
Press X/x to select
then press
.
[SETUP],
The options for [SETUP] appear.
12(27)
18(34)
T
0:00:02
DVD VIDEO
QUICK
QUICK
CUSTOM
RESET
BNR
4
Press X/x to select [CUSTOM], then
press
.
The Setup Display appears.
LANGUAGE SETUP
OSD:
MENU:
AUDIO:
SUBTITLE:
Advanced Settings and Adjustments
3
ENGLISH
ENGLISH
ORIGINAL
AUDIO FOLLOW
continued
75GB
model name [DAV-DZ1000]
[2-895-978-12(1)]
filename[I:\FM E_data\1011_DAVDZ1000_rev\2895978121\2895978121DAVDZ1000\gb11adv.fm]
5
Press X/x to select the setup item from
the displayed list: [LANGUAGE
SETUP], [SCREEN SETUP], [CUSTOM
SETUP], or [SPEAKER SETUP]. Then
press
.
masterpage:Left
specdef v20070110
To reset all of the [SETUP]
settings
1
2
The Setup item is selected.
Example: [SCREEN SETUP]
SCREEN SETUP
TV TYPE:
SCREEN SAVER:
BACKGROUND:
4:3 OUTPUT:
16:9
ON
JACKET PICTURE
FULL
.
Select [YES] using X/x.
You can also quit the process and return to the
Control Menu display by selecting [NO] here.
3
Selected item
Select [RESET] in Step 4 and press
Press
.
All the settings explained on pages 77 to 83
return to the default settings. Do not press [/
1 while resetting the system as it takes a few
seconds to complete.
Note
• When you turn the system on after resetting and no
disc is in the unit, the guide message appears on the
TV screen. To perform the Quick Setup (page 14),
press
, to return to normal screen, press CLEAR.
Setup items
6
Select an item using X/x, then press
.
The options for the selected item appear.
Example: [TV TYPE]
SCREEN SETUP
TV TYPE:
SCREEN SAVER:
BACKGROUND:
4:3 OUTPUT:
16:9
16:9
4:3 LETTER BOX
4:3 PAN SCAN
Options
7
Select a setting using X/x, then press
.
The setting is selected and setup is
complete.
SCREEN SETUP
TV TYPE:
SCREEN SAVER:
BACKGROUND:
4:3 OUTPUT:
4:3 LETTER BOX
ON
JACKET PICTURE
FULL
Selected setting
76GB
model name [DAV-DZ1000]
[2-895-978-12(1)]
filename[I:\FM E_data\1011_DAVDZ1000_rev\2895978121\2895978121DAVDZ1000\gb11adv.fm]
Setting the Display or
Sound Track Language
[LANGUAGE SETUP]
[LANGUAGE SETUP] allows you to set
various languages for the on-screen display or
sound track.
Select [LANGUAGE SETUP] in the Setup
Display. For details, see “Using the Setup
Display” (page 75).
LANGUAGE SETUP
OSD:
MENU:
AUDIO:
SUBTITLE:
masterpage:Right
specdef v20070110
Settings for the Display
[SCREEN SETUP]
Choose settings according to the TV to be
connected.
Select [SCREEN SETUP] in the Setup Display.
For details, see “Using the Setup Display”
(page 75).
The default settings are underlined.
SCREEN SETUP
16:9
TV TYPE:
YCBCR
YCBCR/RGB (HDMI):
COLOR SYSTEM (VIDEO CD):
AUTO
ON
SCREEN SAVER:
BACKGROUND:
JACKET PICTURE
FULL
4:3 OUTPUT:
ENGLISH
ENGLISH
ORIGINAL
AUDIO FOLLOW
x [TV TYPE]
Selects the aspect ratio of the connected TV (4:3
standard or wide).
Switches the display language on the TV screen.
x [MENU] (DVD VIDEO only)
[16:9]
Select this when you connect a
wide-screen TV or a TV with a
wide mode function.
[4:3 LETTER
BOX]
Select this when you connect a 4:3
screen TV. Displays a wide picture
with bands on the upper and lower
portions of the TV screen.
You can select the desired language for the
disc’s menu.
x [AUDIO] (DVD VIDEO only)
Switches the language of the sound track.
When you select [ORIGINAL], the language
given priority in the disc is selected.
[4:3 PAN SCAN] Select this when you connect a 4:3
x [SUBTITLE] (DVD VIDEO only)
Switches the language of the subtitle recorded
on the DVD VIDEO.
When you select [AUDIO FOLLOW], the
language for the subtitles changes according to
the language you selected for the sound track.
screen TV. Automatically displays
the wide picture on the entire
screen and cuts off the portions
that do not fit.
Advanced Settings and Adjustments
x [OSD] (On-Screen Display)
[16:9]
Tip
• If you select [OTHERS t] in [MENU], [AUDIO],
and [SUBTITLE], select and enter a language code
from “Language Code List” (page 95) using the
number buttons.
[4:3 LETTER BOX]
Note
• When you select a language in [MENU], [AUDIO],
or [SUBTITLE] that is not recorded on the DVD
VIDEO, one of the recorded languages will be
automatically selected (depending on the disc, the
language may not be selected automatically).
[4:3 PAN SCAN]
continued
77GB
model name [DAV-DZ1000]
[2-895-978-12(1)]
filename[I:\FM E_data\1011_DAVDZ1000_rev\2895978121\2895978121DAVDZ1000\gb11adv.fm]
Note
masterpage:Left
specdef v20070110
[OFF]
• Depending on the DVD, [4:3 LETTER BOX] may be
selected automatically instead of [4:3 PAN SCAN] or
vice versa.
x [YCBCR/RGB (HDMI)]
Selects the type of HDMI signal output from
HDMI OUT jack.
[YCBCR]
Outputs YCBCR signals.
[RGB]
Outputs RGB signals.
x [BACKGROUND]
Selects the background color or picture on the
TV screen in stop mode or while playing a CD,
DATA CD (MP3 audio), or DATA DVD (MP3
audio).
[JACKET
PICTURE]
The jacket picture (still picture)
appears, but only when the jacket
picture is already recorded on the
disc (CD-EXTRA, etc.). If the
disc does not contain a jacket
picture, the [GRAPHICS] picture
appears.
[GRAPHICS]
A preset picture stored in the
system appears.
[BLUE]
The background color is blue.
[BLACK]
The background color is black.
Note
• If the playback picture becomes distorted, set
[YCBCR] to [RGB].
• If the HDMI OUT jack is connected to equipment
with a DVI jack, [RGB] signals will be automatically
output even when you select [YCBCR].
x [COLOR SYSTEM (VIDEO CD)]
(Asian, Australian, and Middle Eastern
models only)
Select the color system when you play a VIDEO
CD.
[AUTO]
Outputs the video signal in the
system of the disc, either PAL or
NTSC. If your TV uses a DUAL
system, select [AUTO].
[PAL]
Changes the video signal of an
NTSC disc and outputs it in the
PAL system.
[NTSC]
Turns off the screen saver.
x [BLACK LEVEL]
(North American, Mexican, and Latin
American models only)
Selects the black level (setup level) for the video
signals output from the jacks other than
COMPONENT VIDEO OUT/HDMI OUT.
[ON]
Sets the black level of the output
signal to the standard level.
[OFF]
Lowers the standard black level.
Use this when the picture becomes
too white.
Changes the video signal of a PAL
disc and outputs it in the NTSC
system.
x [BLACK LEVEL (COMPONENT OUT)]
Note
• You cannot change the color system of the disc itself.
• You can change the color system of this system
according to the connected TV (page 13).
x [SCREEN SAVER]
The screen saver image appears when you leave
the system in pause or stop mode for 15 minutes,
or when you play back a CD, DATA CD (MP3
audio), or DATA DVD (MP3 audio) for more
than 15 minutes. The screen saver will help
prevent your display device from becoming
damaged (ghosting). Press any button (e.g., H
button) to cancel the screen saver.
[ON]
(North American, Mexican, and Latin
American models only)
Selects the black level (setup level) for the video
signals output from the COMPONENT VIDEO
OUT jacks.
You cannot select this and the setting is not
effective when the system outputs progressive
signal.
[OFF]
Sets the black level of the output
signal to the standard level.
[ON]
Raise the standard black level.
Use this when the picture becomes
too black.
Turns on the screen saver.
78GB
model name [DAV-DZ1000]
[2-895-978-12(1)]
filename[I:\FM E_data\1011_DAVDZ1000_rev\2895978121\2895978121DAVDZ1000\gb11adv.fm]
x [4:3 OUTPUT]
This setting is effective only when you set [TV
TYPE] in [SCREEN SETUP] to [16:9]
(page 77). Adjust to watch 4:3 aspect ratio
progressive signals. If you can change the aspect
ratio on your progressive format (525p/625p)
compatible TV, change the setting on your TV,
not the system. Note that this setting is effective
only for HDMI connection or progressive
signals output from the COMPONENT VIDEO
OUT jacks.
masterpage:Right
specdef v20070110
Custom Settings
[CUSTOM SETUP]
Use this to set up playback related and other
settings.
Select [CUSTOM SETUP] in the Setup Display.
For details, see “Using the Setup Display”
(page 75).
The default settings are underlined.
Note
• This setting is effective only when
“PROGRESSIVE” is selected by using VIDEO
FORMAT (page 21).
Select this when you can change
the aspect ratio on your TV.
[NORMAL]
Select this when you cannot
change the aspect ratio on your
TV. Shows a 16:9 aspect ratio
signal with black bands on left and
right sides of the image.
16:9 aspect ratio TV
x [HDMI CONTROL]
Switches the HDMI CONTROL function on or
off. This function is available when you connect
the system and TV with the HDMI cord. For
details on this function, see the HDMI
CONTROL Guide (supplied separately).
[OFF]
Sets the HDMI CONTROL
function to off.
[ON]
Sets the HDMI CONTROL
function to on.
You can operate mutually
between components that are
connected with the HDMI cord.
Note
• When you set to [ON] without the HDMI connection
of the TV, [Please verify the HDMI connection]
appears and you can not set to [ON].
Advanced Settings and Adjustments
[FULL]
CUSTOM SETUP
OFF
HDMI CONTROL:
OFF
STB SYNCHRO:
AUTO
PAUSE MODE:
OFF
TRACK SELECTION:
ON
MULTI-DISC RESUME:
OFF
AUDIO DRC:
OFF
AUDIO (HDMI):
Registration Code
DivX:
x [STB SYNCHRO]
Switches the STB SYNCHRO function on or
off. This function is available when you connect
the system and TV with the HDMI cord and you
set [HDMI CONTROL] to [ON]. For details on
this function, see the HDMI CONTROL Guide
(supplied separately).
[OFF]
Sets the STB SYNCHRO function
to off.
continued
79GB
model name [DAV-DZ1000]
[2-895-978-12(1)]
filename[I:\FM E_data\1011_DAVDZ1000_rev\2895978121\2895978121DAVDZ1000\gb11adv.fm]
[ON]
Sets the STB SYNCHRO function
to on.
Note
masterpage:Left
specdef v20070110
x [AUDIO DRC] (DVD VIDEO only)
Narrows the dynamic range of the sound track.
Useful for watching movies at low volume late
at night.
• This function is available only when you set [HDMI
CONTROL] to [ON].
[OFF]
x [PAUSE MODE] (DVD VIDEO/DVD-R/
DVD-RW only)
No compression of dynamic
range.
[STANDARD]
Reproduces the sound track with
the kind of dynamic range that the
recording engineer intended.
[MAX]
Compresses dynamic range fully.
Selects the picture in pause mode.
[AUTO]
[FRAME]
The picture, including subjects
that move dynamically, is output
with no jitter. Normally select this
position.
The picture, including subjects
that do not move dynamically, is
output in high resolution.
x [TRACK SELECTION] (DVD VIDEO only)
Gives the sound track which contains the highest
number of channels priority when you play a
DVD VIDEO on which multiple audio formats
(PCM, DTS, MPEG audio, or Dolby Digital
format) are recorded.
[OFF]
No priority given.
[AUTO]
Priority given.
Note
• When you set the item to [AUTO], the language may
change. The [TRACK SELECTION] setting has
higher priority than the [AUDIO] settings in
[LANGUAGE SETUP] (page 77). (Depending on
the disc, this function may not work.)
• If PCM, DTS, Dolby Digital sound, and MPEG audio
tracks have the same number of channels, the system
selects PCM, DTS, Dolby Digital sound, and MPEG
audio tracks in this order.
x [AUDIO (HDMI)]
Selects the audio output status from the HDMI
OUT jack.
[OFF]
The sound is not output from the
HDMI OUT jack.
[ON]
Outputs audio signals by
converting Dolby Digital, DTS, or
96 kHz/24 bit PCM signals to 48
kHz/ 16 bit PCM.
Note
• When you connect the unit and TV with the HDMI
cord and [ON] is selected, AUDIO DRC, A/V SYNC,
DYNAMIC BASS, MOVIE/MUSIC, and sound field
are not applied to the sound that is output from the
TV.
x [DivX]
Displays the registration code for this system.
For more information, go to
http://www.divx.com on the Internet.
x [MULTI-DISC RESUME] (DVD VIDEO/
VIDEO CD only)
Switches the Multi-disc Resume setting on or
off.
[ON]
Stores the resume settings in
memory.
[OFF]
Does not store the resume settings
in memory. Playback restarts at
the resume point only for the
current disc in the unit.
80GB
model name [DAV-DZ1000]
[2-895-978-12(1)]
filename[I:\FM E_data\1011_DAVDZ1000_rev\2895978121\2895978121DAVDZ1000\gb11adv.fm]
Settings for the Speakers
[SPEAKER SETUP]
To obtain the best possible surround sound, set
connection of the speakers and their distance
from your listening position. Then use the test
tone to adjust the level and the balance of the
speakers to the same level.
masterpage:Right
specdef v20070110
x [DISTANCE (FRONT)]
The default distance setting for the speakers in
relation to the listening position is shown below.
When you set the distance using the Quick Setup
(page 14), the settings is automatically
displayed.
Select [SPEAKER SETUP] in the Setup
Display. For details, see “Using the Setup
Display” (page 75).
The default settings are underlined.
YES
YES
YES
YES
To return to the default setting
when changing a setting
Select the item, then press CLEAR. Note that
only the [CONNECTION] setting does not
return to the default setting.
x [CONNECTION]
If you do not connect center or surround
speakers, set the parameters for [CENTER] and
[SURROUND]. Since the front speaker and
subwoofer setting is fixed, you cannot change
them.
[FRONT]
[YES]
[CENTER]
[YES]: Normally select this.
[NONE]: Select this if no center
speaker is used.
[SURROUND]
[SUBWOOFER]
[YES]: Normally select this.
[NONE]: Select this if no
surround speaker is used.
[YES]
Note
• When you change the [CONNECTION] setting, the
[SPEAKER FORMATION] setting returns to
[STANDARD].
Be sure to change the value in the Setup Display
when you move the speakers.
[L/R]
3.00 m/10 ft1)3)
Front speaker distance from the
listening position can be set from
0.00 to 7.00 meters2) (0 to 23 ft).
[CENTER]
3.00 m/10 ft1)3)
Center speaker distance from the
listening position can be set from
(appears when you 0.00 to 7.00 meters2) (0 to 23 ft).
set [CENTER] to
[YES] in the
[CONNECTION]
setting.)
[SUBWOOFER]
3.00 m/10 ft1)3)
Subwoofer distance from the
listening position can be set from
0.00 to 7.00 meters2) (0 to 23 ft).
Advanced Settings and Adjustments
SPEAKER SETUP
CONNECTION:
DISTANCE(FRONT):
DISTANCE(SURROUND):
LEVEL(FRONT):
LEVEL(SURROUND):
OFF
TEST TONE:
FRONT:
CENTER:
SURROUND:
SUBWOOFER:
0.00 - 7.00 m2)/
0 - 23 ft
1)
When you perform the Quick Setup (page 14), the
default settings are changed.
2)0.00
to 7.01 meters for North American models.
3)3.04
m/10 ft for North American models.
x [DISTANCE (SURROUND)]
The default distance setting for the speakers in
relation to the listening position is shown below.
When you set the distance using the Quick Setup
(page 14), the settings is automatically
displayed.
continued
81GB
model name [DAV-DZ1000]
[2-895-978-12(1)]
filename[I:\FM E_data\1011_DAVDZ1000_rev\2895978121\2895978121DAVDZ1000\gb11adv.fm]
masterpage:Left
specdef v20070110
[SUBWOOFER]
0.0 dB
Set this between –6.0 dB and
+6.0 dB.
x [LEVEL (SURROUND)]
You can vary the level of surround speakers as
follows. Be sure to set [TEST TONE] to [ON]
for easy adjustment.
0.00 - 7.00 m2)/
0 - 23 ft
[L/R]
0.0 dB
(appears when you
set [SURROUND]
to [YES] in the
[CONNECTION]
setting.)
Set this between –6.0 dB and
+6.0 dB.
Be sure to change the value in the Setup Display
when you move the speakers.
To adjust the volume of all the
speakers at one time
[L/R]
3.00 m/10 ft1)3)
Turn the VOLUME control on the unit, or press
VOLUME +/– on the remote.
Surround speaker distance
from the listening position can
(appears when you
be set from 0.00 to 7.00
set [SURROUND] to meters2) (0 to 23 ft).
[YES] in the
[CONNECTION]
setting.)
1)
When you perform the Quick Setup (page 14), the
default settings are changed.
2)0.00
to 7.01 meters for North American models.
3)3.04
m/10 ft for North American models.
x [TEST TONE]
The speakers will emit a test tone to adjust
[LEVEL (FRONT)] and [LEVEL
(SURROUND)].
[OFF]
The test tone is not emitted from the
speakers.
[ON]
The test tone is emitted from each speaker
in sequence while adjusting level. When
you select one of the [SPEAKER SETUP]
items, the test tone is emitted from each
speaker in sequence.
Note
• Depending on the input stream, the [DISTANCE]
setting may not be effective.
• When the speaker distance setting is not in the
** m is displayed (**
recommended range,
/
being the number).
indicates over the
recommended distance.
indicates below.
x [LEVEL (FRONT)]
You can vary the level of front speakers as
follows. Be sure to set [TEST TONE] to [ON]
for easy adjustment.
[L/R]
0.0 dB
Set this between –6.0 dB and
+6.0 dB.
[CENTER]
0.0 dB
Set this between –6.0 dB and
+6.0 dB.
(appears when you
set [CENTER] to
[YES] in the
[CONNECTION]
setting.)
Adjusting the speaker level by
using the test tone
1
Press
DISPLAY when the system is
in stop mode.
The Control Menu display appears.
2
Press X/x to select
then press
.
[SETUP],
The options for [SETUP] appear.
3
Press X/x to select [CUSTOM], then
press
.
The Setup Display appears.
4
Press X/x repeatedly to select
[SPEAKER SETUP], then press
c.
or
82GB
model name [DAV-DZ1000]
[2-895-978-12(1)]
filename[I:\FM E_data\1011_DAVDZ1000_rev\2895978121\2895978121DAVDZ1000\gb11adv.fm]
5
6
Press X/x repeatedly to select [TEST
TONE], then press
or c.
Press X/x repeatedly to select [ON],
then press
.
You will hear the test tone from each
speaker in sequence.
7
masterpage:Right
specdef v20070110
Returning to the Default
Settings
You can return the system parameters, such as
preset stations, to the default settings.
From your listening position, adjust the
value of [LEVEL (FRONT)] or [LEVEL
(SURROUND)] using C/X/x/c.
"/1
A
x
The test tone is emitted from only the
speaker which you are adjusting.
8
9
Press
when you have finished
making adjustments.
Press X/x repeatedly to select [TEST
TONE], then press
.
10 Press X/x repeatedly to select [OFF],
then press
.
1
2
Press "/1 to turn on the system.
Press x, A, and "/1 on the unit at the
same time.
“COLD RESET” appears in the front panel
display and the default settings are returned.
Note
Advanced Settings and Adjustments
• The test tone signals are not output from the HDMI
OUT jack.
83GB
model name [DAV-DZ1000]
[2-895-978-12(1)]
filename[I:\FM E_data\1011_DAVDZ1000_rev\2895978121\2895978121DAVDZ1000\gb12add.fm]
masterpage:Left
specdef v20070110
On adjusting volume
Additional Information
Precautions
• Do not turn up the volume while listening to a section
with very low level inputs or no audio signals. If you
do, the speakers may be damaged when a peak level
section is suddenly played.
On power sources
On cleaning
• Unplug the unit from the wall outlet if you do not
intend to use it for an extended period of time. To
disconnect the cord, pull it out by the plug, never by
the cord.
• Clean the cabinet, panel, and controls with a soft cloth
slightly moistened with a mild detergent solution. Do
not use any type of abrasive pad, scouring powder or
solvent such as alcohol or benzine.
If you have any questions or problems concerning
your system, please consult your nearest Sony dealer.
• The surface of the speakers are delicate. When
cleaning them, use the supplied cleaning cloth to
prevent scratching.
On placement
• Place the system in a location with adequate
ventilation to prevent heat build-up in the system.
• At high volume, over long periods of time, the cabinet
becomes hot to the touch. This is not a malfunction.
However, touching the cabinet should be avoided. Do
not place the unit in a confined space where
ventilation is poor as this may cause overheating.
• Do not block the ventilation slots by putting anything
on the system. The system is equipped with a high
power amplifier. If the ventilation slots are blocked,
the unit can overheat and malfunction.
• Do not place the unit on surfaces (rugs, blankets, etc.)
or near materials (curtains, draperies) that may block
the ventilation slots.
• Do not install the unit near heat sources such as
radiators, or air ducts, or in a place subject to direct
sunlight, excessive dust, mechanical vibration, or
shock.
• Do not install the unit in an inclined position. It is
designed to be operated in a horizontal position only.
• Keep the unit and discs away from equipment with
strong magnets, such as microwave ovens, or large
loudspeakers.
• Do not place heavy objects on the unit.
On operation
• If the system is brought directly from a cold to a warm
location, or is placed in a very damp room, moisture
may condense on the lenses inside the control unit.
Should this occur, the system may not operate
properly. In this case, remove the disc and leave the
system turned on for about half an hour until the
moisture evaporates.
• When you move the system, take out any disc. If you
don’t, the disc may be damaged.
• If anything falls into the cabinet, unplug the unit and
have it checked by qualified personnel before
operating it any further.
On cleaning discs, disc/lens
cleaners
• Do not use cleaning discs or disc/lens cleaners
(including wet or spray types). These may cause
the apparatus to malfunction.
On your TV’s color
• If the speakers should cause the TV screen to have
color irregularity, turn off the TV then turn it on after
15 to 30 minutes. If color irregularity should persist,
place the speakers further away from the TV set.
IMPORTANT NOTICE
Caution: This system is capable of holding a still
video image or on-screen display image on your
television screen indefinitely. If you leave the still
video image or on-screen display image displayed
on your TV for an extended period of time you risk
permanent damage to your television screen.
Projection televisions are especially susceptible to
this.
The nameplate is located on the bottom exterior.
On moving the system
Before moving the system, make sure that there is no
disc inserted, and remove the AC power cord (mains
lead) from the wall outlet (mains).
84GB
model name [DAV-DZ1000]
[2-895-978-12(1)]
filename[I:\FM E_data\1011_DAVDZ1000_rev\2895978121\2895978121DAVDZ1000\gb12add.fm]
Notes about the Discs
On handling discs
• To keep the disc clean, handle the disc by its
edge. Do not touch the surface.
• Do not stick paper or tape on the disc.
masterpage:Right
specdef v20070110
Troubleshooting
If you experience any of the following
difficulties while using the system, use this
troubleshooting guide to help remedy the
problem before requesting repairs. Should any
problem persist, consult your nearest Sony
dealer.
Note that if service personnel changes some
parts during repair, these parts may be retained.
Power
• Do not expose the disc to direct sunlight or
heat sources such as hot air ducts, or leave it in
a car parked in direct sunlight as the
temperature may rise considerably inside the
car.
• After playing, store the disc in its case.
On cleaning
• Before playing, clean the disc with a cleaning
cloth.
Wipe the disc from the center out.
This system can only play back a standard
circular disc. Using neither standard nor circular
discs (e.g., card, heart, or star shape) may cause
a malfunction.
Do not use a disc that has a commercially
available accessory attached, such as a label or
ring.
If “PROTECTOR” and “PUSH POWER” appear
alternately in the front panel display.
Press "/1 to turn off the system, and check the
following items after “STANDBY” disappears.
• Are the + and – speaker cords short-circuited?
• Are you using only the specified speakers?
• Is anything blocking the ventilation holes of the
system?
After checking the above items and fixing any
problems, turn on the system. If the cause of the
problem cannot be found even after checking all the
above items, consult your nearest Sony dealer.
Picture
There is no picture.
• The video connecting cords are not connected
securely.
• The video connecting cords are damaged.
• The unit is not connected to the correct TV input
jack (page 9, 19).
• The video input on the TV is not set so that you
can view pictures from the system.
• You have set progressive format but your TV
cannot accept the signal in progressive format. In
this case, return the setting to interlace format (the
default setting) (page 21).
• Even if your TV is compatible with progressive
format (525p/625p) signals, the image may be
affected when you set progressive format. In this
case, return the setting to interlace format (the
default setting) (page 21).
• Re-connect the connecting cord securely.
Additional Information
• Do not use solvents such as benzine, thinner,
commercially available cleaners, or anti-static
spray intended for vinyl LPs.
The power is not turned on.
• Check that the AC power cord (mains lead) is
connected securely.
• Press "/1 after “STANDBY” disappears from the
front panel display.
continued
85GB
model name [DAV-DZ1000]
[2-895-978-12(1)]
filename[I:\FM E_data\1011_DAVDZ1000_rev\2895978121\2895978121DAVDZ1000\gb12add.fm]
• The unit is connected to an input device that is not
HDCP (high-bandwidth digital content
protection) compliant (“HDMI” on the front panel
does not light up). See page 98.
• If the HDMI OUT jack is used for video output,
changing the type of video signal output from the
HDMI OUT jack by pressing VIDEO FORMAT
may solve the problem (page 20).
Connect the TV and the unit using a video jack
other than the HDMI OUT, and switch the TV’s
input to the connected video input so that you can
see the on-screen displays. Change the type of
video signal output from the HDMI OUT jack,
and switch the TV’s input back to HDMI. If the
picture still does not appear, repeat the steps and
try other options.
• You have selected “PROGRESSIVE” using the
VIDEO FORMAT button on the remote
(“PROGRE” lights up in the front panel display)
even though your TV cannot accept the
progressive signal. In this case, disconnect the
HDMI cord from the unit and then select
“INTERLACE” so that “PROGRE” turns off.
• If the signal from the S VIDEO OUT jack is
distorted, change the type of video signal output
from the HDMI OUT jack by pressing VIDEO
FORMAT to [720 × 480p]* (page 20).
* Depending on the country, [720 × 576p] may
appear.
Picture noise appears.
• The disc is dirty or flawed.
• If the picture output from your system goes
through your VCR to get to your TV, the copyprotection signal applied to some DVD programs
could affect picture quality. If you still experience
problems even when you connect your unit
directly to your TV, try connecting your unit to
your TV’s S video input (page 19).
Even though you set the aspect ratio in [TV
TYPE] of [SCREEN SETUP], the picture does
not fill the TV screen.
• The aspect ratio on the disc is fixed.
Color irregularity occurs on the TV screen.
The center speaker and the front speakers in this
system are magnetically shielded to prevent
magnetic leakage. However, some leakage may
occur, as a high-strength magnet is employed. If this
happens, check the following items:
• If the speakers are used with a CRT-based TV or
projector, install the speakers at least 0.3 meters
(1.0 ft) from the TV set.
• If the color irregularity persists, turn off the TV set
once, then turn it on after 15 to 30 minutes.
masterpage:Left
specdef v20070110
• If howling occurs, reposition the speakers farther
away from the TV set.
• Make sure that no magnetic object (magnetic latch
on a TV stand, health care device, toy, etc.) is
placed near the speakers.
Sound
There is no sound.
• The speaker cord is not connected securely.
• Press MUTING on the remote if “MUTING ON”
is displayed in the front panel display.
• The system is in pause mode or in Slow-motion
Play mode. Press H to return to normal play
mode.
• Fast forward or fast reverse is performed. Press
H to return to normal play mode.
• Check the speaker settings (page 81).
• The equipment connected to the HDMI OUT jack
does not conform to the audio signal format, in
this case set [AUDIO (HDMI)] in [CUSTOM
SETUP] to [ON] (page 80).
No sound is output from the HDMI OUT jack.
• Set [AUDIO (HDMI)] in [CUSTOM SETUP] to
[ON] (page 80).
• The HDMI OUT jack is connected to a DVI
(digital visual interface) device (DVI (digital
visual interface) jacks do not accept audio
signals).
• Try the following: 1 Turn the system off and on
again. 2 Turn the connected equipment off and
on again. 3 Disconnect and then connect the
HDMI cord again.
The left and right sounds are unbalanced or
reversed.
• Check that the speakers and components are
connected correctly and securely.
There is no sound from the subwoofer.
• Check the speaker connections and settings (page
9, 81).
• Set the sound field to “A.F.D. STD” (page 29).
Severe hum or noise is heard.
• Check that the speakers and components are
connected securely.
• Check that the connecting cords are away from a
transformer or motor, and at least 3 meters (10 ft)
away from your TV set or a fluorescent light.
• Move your TV away from the audio components.
• The plugs and jacks are dirty. Wipe them with a
cloth slightly moistened with alcohol.
• Clean the disc.
86GB
model name [DAV-DZ1000]
[2-895-978-12(1)]
filename[I:\FM E_data\1011_DAVDZ1000_rev\2895978121\2895978121DAVDZ1000\gb12add.fm]
The sound loses stereo effect when you play a
VIDEO CD, a CD, or an MP3.
• Set [AUDIO] to [STEREO] by pressing AUDIO
(page 39).
• Make sure the unit is connected properly.
The surround effect is difficult to hear when
you are playing a Dolby Digital, DTS, or MPEG
audio sound track.
• Make sure the sound field function is on (page 29).
• Check the speaker connections and settings (page
9, 81).
• Depending on the DVD, the output signal may not
be the entire 5.1 channel. It may be monaural or
stereo even if the sound track is recorded in Dolby
Digital or MPEG audio format.
The sound comes from the center speaker
only.
• Depending on the disc, the sound may come from
the center speaker only.
No sound or only a very low-level sound is
heard from the surround speakers.
• Check the speaker connections and settings (page
9, 81).
• Make sure the sound field function is on (page 29).
• Depending on the source, the effect of the
surround speakers may be less noticeable.
• A 2 channel source is being played.
Microphone sound is not output.
• A function other than DVD is selected.
• The microphone is not connected to the unit
properly.
• The microphone volume is set to minimum.
There is no sound from the speakers that are
indicated in the front panel display.
• The front panel display indicates the selected
[SPEAKER FORMATION]. It does not indicate
the speakers which output sound (page 29, 71).
The beginning of the sound is cut off.
• Set the Movie/Music mode to “MOVIE” or
“MUSIC” (page 28).
• Set the sound field to “A.F.D. STD” (page 29).
Operation
Radio stations cannot be tuned in.
• Check that the antenna (aerial) is connected
securely. Adjust the antenna (aerial) or connect an
external antenna (aerial) if necessary.
• The signal strength of the stations is too weak
(when tuning in with automatic tuning). Use direct
tuning.
• No stations have been preset or the preset stations
have been cleared (when tuning by scanning
preset stations). Preset the stations (page 55).
• Press DISPLAY so that the frequency appears in
the front panel display.
The remote does not function.
• There are obstacles between the remote and the
unit.
• The distance between the remote and the unit is
too far.
• The remote is not pointed at the remote sensor on
the unit.
• The batteries in the remote are weak.
The disc does not play.
• There is no disc inserted.
• The disc is upside down.
Insert the disc with the playback side facing down.
• The disc is skewed on the disc tray.
• The system cannot play CD-ROMs, etc. (page 5).
• The region code on the DVD does not match the
system.
• Moisture has condensed inside the unit and may
cause damage to the lenses. Remove the disc and
leave the unit turned on for about half an hour.
The MP3 audio track cannot be played.
• The DATA CD is not recorded in the MP3 format
that conforms to ISO 9660 Level 1/Level 2, or
Joliet.
• The DATA DVD is not recorded in an MP3
format that conforms to UDF (Universal Disk
Format).
• The MP3 audio track does not have the extension
“.MP3.”
• The data is not formatted in MP3 even though it
has the extension “.MP3.”
• The data is not MPEG1 Audio Layer 3 data.
• The system cannot play audio tracks in MP3PRO
format.
• The [MODE (MP3, JPEG)] setting has been set to
[IMAGE (JPEG)] (page 50).
• If you cannot change the [MODE (MP3, JPEG)]
setting, re-load the disc or turn the system off, then
on.
Additional Information
No sound is heard from the center speaker.
• Check the speaker connections and settings (page
9, 81).
• Make sure the sound field function is on (page 29).
• Depending on the source, the effect of the center
speaker may be less noticeable.
• A 2 channel source is being played.
masterpage:Right
specdef v20070110
continued
87GB
model name [DAV-DZ1000]
[2-895-978-12(1)]
filename[I:\FM E_data\1011_DAVDZ1000_rev\2895978121\2895978121DAVDZ1000\gb12add.fm]
• The DATA CD/DATA DVD contains a DivX
video file.
The JPEG image file cannot be played.
• The DATA CD is not recorded in a JPEG format
that conforms to ISO 9660 Level 1/Level 2, or
Joliet.
• The DATA DVD is not recorded in a JPEG format
that conforms to UDF (Universal Disk Format).
• It has an extension other than “.JPEG” or “.JPG.”
• It is larger than 3,072 (width) × 2,048 (height) in
normal mode, or more than 2,000,000 pixels in
Progressive JPEG which is mainly used on the
Internet WEB site.
• It does not fit the TV screen (those images are
reduced).
• The [MODE (MP3, JPEG)] setting has been set to
[AUDIO (MP3)] (page 50).
• If you cannot change the [MODE (MP3, JPEG)]
setting, re-load the disc or turn the system off, then
on.
• The DATA CD/DATA DVD contains a DivX
video file.
The MP3 audio tracks and JPEG image file
starts playing simultaneously.
• [AUTO] has been selected in [MODE (MP3,
JPEG)] (page 50).
The DivX video file cannot be played.
• The file is not created in DivX format.
• The file has an extension other than “.AVI” or
“.DIVX.”
• The DATA CD/DATA DVD is not created in a
DivX format that conforms to ISO 9660 Level 1/
Level 2 or, Joliet/UDF.
• The DivX video file is larger than 720 (width) ×
576 (height).
The titles of album/track/file name are not
displayed correctly.
• The system can only display numbers and letters
of the alphabets. Other characters are displayed as
[*].
A disc does not start playing from the
beginning.
• Program Play, Shuffle Play, or Repeat Play has
been selected.
Press CLEAR to cancel these functions before
playing a disc.
• Resume Play has been selected.
During stop, press x on the unit or the remote and
then start playback (page 34).
• The title, DVD or PBC menu automatically
appears on the TV screen.
masterpage:Left
specdef v20070110
The system starts playing the disc
automatically.
• The DVD features an auto playback function.
Playback stops automatically.
• Some discs may contain an auto pause signal.
While playing such a disc, the system stops
playback at the auto pause signal.
You cannot perform some functions such as
Stop, Search, Slow-motion Play, or Repeat
Play.
• Depending on the disc, you may not be able to
perform some of the operations above. See the
operating instructions that came with the disc.
Messages do not appear on the TV screen in
the language you want.
• In the Setup Display, select the desired language
for the on-screen display in [OSD] under
[LANGUAGE SETUP] (page 77).
The language for the sound track cannot be
changed.
• Multilingual tracks are not recorded on the DVD
being played.
• The DVD prohibits changing the language for the
sound track.
The subtitle language cannot be changed.
• Multilingual subtitles are not recorded on the
DVD being played.
• The DVD prohibits changing the subtitles.
The subtitle cannot be turned off.
• The DVD prohibits turning off subtitles.
The angles cannot be changed.
• Multi-angles are not recorded on the DVD being
played (page 44).
• The DVD prohibits changing the angles.
A disc cannot be ejected and “LOCKED”
appears in the front panel display.
• Contact your Sony dealer or local authorized Sony
service facility.
[Data error] appears on the TV screen when
playing a DATA CD or DATA DVD.
• The MP3 audio track/JPEG image file/DivX
video file you want to play is broken.
• The data is not MPEG1 Audio Layer 3 data.
• The JPEG image file format does not conform to
DCF.
• The JPEG image file has the extension “.JPG” or
“.JPEG,” but is not in JPEG format.
• The file you want to play has the extension “.AVI”
or “.DIVX” but is not in DivX format, or is in
88GB
model name [DAV-DZ1000]
[2-895-978-12(1)]
filename[I:\FM E_data\1011_DAVDZ1000_rev\2895978121\2895978121DAVDZ1000\gb12add.fm]
DivX format but does not conform to a DivX
Certified profiles.
The system does not work normally.
• Disconnect the AC power cord (mains lead) from
the wall outlet (mains), then reconnect after
several minutes.
The unit does not work and “CHILD LOCK”
appears in the front panel display when you
press any button on the unit.
• Set the child lock function to off (page 67).
No sound is output from the system and TV
while using the System Audio Control
function.
• Set the [AUDIO (HDMI)] setting in [CUSTOM
SETUP] to [ON] (page 80).
• Make sure that the connected TV is compatible
with the System Audio Control function.
• For details on the System Audio Control function,
see the HDMI CONTROL Guide (supplied
separately).
Self-diagnosis Function
(When letters/numbers appear in the
display)
When the self-diagnosis function is activated to
prevent the system from malfunctioning, a 5character service number (e.g., C 13 50) with a
combination of a letter and 4 digits appears on
the TV screen or front panel display. In this case,
check the following table.
C:13:50
First 3
characters of
the service
number
Cause and/or corrective action
C 13
The disc is dirty.
,Clean the disc with a soft cloth
(page 85).
C 31
The disc is not inserted correctly.
,Restart the system, then re-insert
the disc correctly.
E XX
To prevent a malfunction, the
(xx is a number) system has performed the selfdiagnosis function.
,Contact your nearest Sony
dealer or local authorized Sony
service facility and give the 5character service number.
Example: E 61 10
Additional Information
The HDMI CONTROL function does not work.
• When “HDMI” does not light up in the front panel
display, check the HDMI connection (page 19).
• Set the [HDMI CONTROL] setting in [CUSTOM
SETUP] to [ON] (page 79).
• Make sure that the connected component is
compatible with the HDMI CONTROL function.
• Check that the AC power cord (mains lead) of the
connected component is connected securely.
• Check the connected component’s setting for the
HDMI CONTROL function. See the operating
instructions of the component.
• If you change the HDMI connection, connect and
disconnect the AC power cord (mains lead), or
have a power failure, set the [HDMI CONTROL]
setting in [CUSTOM SETUP] to [OFF], then set
the [HDMI CONTROL] setting in [CUSTOM
SETUP] to [ON] (page 79).
• For details on the HDMI CONTROL function, see
the HDMI CONTROL Guide (supplied
separately).
masterpage:Right
specdef v20070110
When displaying the version
number on the TV screen
When you turn on the system, the version
number [VER.X.XX] (X is a number) may
appear on the TV screen. Although this is not a
malfunction and for Sony service use only,
normal system operation will not be possible.
Turn off the system, and then turn on the system
again to operate.
VER.X.XX
89GB
model name [DAV-DZ1000]
[2-895-978-12(1)]
filename[I:\FM E_data\1011_DAVDZ1000_rev\2895978121\2895978121DAVDZ1000\gb12add.fm]
Specifications
Amplifier section
Stereo mode (rated)
108 W + 108 W (at 3 ohms,
1 kHz, 1 % THD)
Surround mode (reference) RMS output power
FL/FR/C/SL/SR*: 143 watts
(per channel at 3 ohms, 1
kHz, 10 % THD)
Subwoofer*: 285 watts (at
1.5 ohms, 80 Hz, 10 %
THD)
* Depending on the sound field settings and the source,
there may be no sound output.
Inputs (Analog)
TV (AUDIO IN)
Sensitivity: 450/250 mV
SAT/CABLE (AUDIO IN)Sensitivity: 450/250 mV
AUDIO IN/MIC 1
Sensitivity:
AUDIO IN 250/125 mV/
MIC 1 1 mV
MIC 2
Sensitivity: 1 mV
masterpage:Left
specdef v20070110
531 – 1,710 kHz (with the
interval set at 9 kHz)
European, Russian, and Middle Eastern models:
531 – 1,602 kHz (with the
interval set at 9 kHz)
Australian and New Zealand models:
531 – 1,710 kHz (with the
interval set at 9 kHz)
530 – 1,710 kHz (with the
interval set at 10 kHz)
Other models:
531 – 1,602 kHz (with the
interval set at 9 kHz)
530 – 1,610 kHz (with the
interval set at 10 kHz)
Antenna (aerial)
AM loop antenna (aerial)
Intermediate frequency
450 kHz
Video section
Outputs
VIDEO: 1 Vp-p 75 ohms
S VIDEO:
Y: 1 Vp-p 75 ohms
C: 0.286 Vp-p 75 ohms
COMPONENT:
Y: 1 Vp-p 75 ohms
PB/CB, PR/CR: 0.7 Vp-p
75 ohms
Inputs (Digital)
SAT/CABLE (COAXIAL IN/OPTICAL IN)
Impedance: 75 ohms/–
DVD system
Laser
Inputs
Semiconductor laser
(DVD: λ = 650 nm)
(CD: λ = 790 nm)
Emission duration:
continuous
Signal format system
Mexican and Latin American models:
NTSC
Other models:
NTSC/PAL
Tuner section
System
FM tuner section
Tuning range
North American models:
HDMI OUT: Type A (19
pin)
VIDEO: 1 Vp-p 75 ohms
PLL quartz-locked digital
synthesizer
87.5-108.0 MHz (100 kHz
step)
Other models:
87.5-108.0 MHz (50 kHz
step)
Antenna (aerial)
FM wire antenna (aerial)
Antenna (aerial) terminals 75 ohms, unbalanced
Intermediate frequency
10.7 MHz
AM tuner section
Tuning range
North American, Mexican, and Latin American
models:
530 – 1,710 kHz (with the
interval set at 10 kHz)
Speakers
Front/Surround (SS-TS77)
Speaker system
Speaker unit
Rated impedance
Dimensions (approx.)
Mass (approx.)
Two way, Closed,
magnetically shielded
Woofer: 80 mm dia, cone
type × 2
Tweeter: 20 mm dia, dome
type
3.0 ohms
310 × 1,200 × 310 mm
(w/h/d)
8.0 kg
Center (SS-CT74)
Speaker system
Speaker unit
Rated impedance
Dimensions (approx.)
Mass (approx.)
Closed, magnetically
shielded
30 × 60 mm, cone type
3.0 ohms
381 × 48 × 68 mm (w/h/d)
0.5 kg
Subwoofer (SS-WS77)
Speaker system
Speaker unit
Rated impedance
Dimensions (approx.)
Bass reflex
160 mm dia, cone type
1.5 ohms
230 × 490 × 382 mm
(w/h/d)
90GB
model name [DAV-DZ1000]
[2-895-978-12(1)]
filename[I:\FM E_data\1011_DAVDZ1000_rev\2895978121\2895978121DAVDZ1000\gb12add.fm]
Mass (approx.)
masterpage:Right
specdef v20070110
10.5 kg
Glossary
General
Power requirements
Mexican models:
Chinese models:
120 V AC, 60 Hz
220 V - 240 V AC,
50/60 Hz
Taiwan models:
120 V AC, 50/60 Hz
Other models:
220 - 240 V AC, 50/60 Hz
Power consumption
On: 180 W
Standby: 0.3 W (at the
Power Saving mode)
Output voltage (DIGITAL MEDIA PORT) (except for
Mexican and Latin
American models)
DC 5 V
Output current (DIGITAL MEDIA PORT) (except for
Mexican and Latin
American models)
700 mA
Dimensions (approx.)
430 × 63 × 380 mm (w/h/d)
incl. projecting parts
Mass (approx.)
4.2 kg
Design and specifications are subject to change
without notice.
Unpacking
•Standby power consumption 0.3 W (or
less).
•Halogenated flame retardants are not
used in the printed wiring boards.
•Over 85 % power efficiency of
amplifier block is achieved with the
full digital amplifier, S-master.
Section of a music piece or an image on a data
CD containing MP3 audio tracks or JPEG files.
Chapter
Subdivision of a title on a DVD. A title is
composed of several chapters.
Digital Cinema Auto Calibration
Digital Cinema Auto Calibration was developed
by Sony to automatically measure and adjusts
the speaker settings to your listening
environment in a short period of time.
Digital Direct Twin Drive Subwoofer
Utilizing Sony's proprietary S-Master
technology, the Digital Direct Twin Drive
Subwoofer features two S-Master Digital
Amplifiers that provide dedicated power to a
strategically located subwoofer for astounding
sound performance. Easy to set up, Digital
Direct Twin Drive Subwoofer provides a stable
sound field over a much larger listening area
without having to adjust frequency levels.
DivX®
Digital video technology created by DivX, Inc.
Videos encoded with DivX technology are
among the highest quality with a relatively small
file size.
Dolby Digital
This movie theater sound format is more
advanced than Dolby Surround Pro Logic. In
this format, the surround speakers output stereo
sound with an expanded frequency range, and a
subwoofer channel for deep bass is
independently provided. This format is also
called “5.1” with the subwoofer channel
designed as the 0.1 channel (since it functions
only when a deep bass effect is needed). All six
channels in this format are recorded separately
for superior channel separation. Furthermore,
since all the signals are processed digitally, less
signal degradation occurs.
Additional Information
• Front speakers (2)
• Center speaker (1)
• Surround speakers (2)
• Subwoofer (1)
• AM loop antenna (aerial) (1)
• FM wire antenna (aerial) (1)
• Speaker cords (6, red/white/green/gray/blue/purple)
• Video Cord (1)
• Remote Commander (remote) (1)
• R6 (size AA) batteries (2)
• Calibration mic (1)
• Microphone (1) (Russian model only)
• Cleaning cloth (1)
• Operating Instructions
• HDMI CONTROL Guide
• Speaker and TV connections (card)
Album
continued
91GB
model name [DAV-DZ1000]
[2-895-978-12(1)]
filename[I:\FM E_data\1011_DAVDZ1000_rev\2895978121\2895978121DAVDZ1000\gb12add.fm]
masterpage:Left
specdef v20070110
Dolby Pro Logic II
DVD
Dolby Pro Logic II creates five full-bandwidth
output channels from 2 channel sources. This is
done using an advanced, high-purity matrix
surround decoder that extracts the spatial
properties of the original recording without
adding any new sounds or tonal colorations.
A disc that contains up to 8 hours of moving
pictures even though its diameter is the same as
a CD.
The data capacity of a single-layer and singlesided DVD, at 4.7 GB (Giga Byte), is 7 times
that of a CD. Furthermore, the data capacity of a
dual-layer and single-sided DVD is 8.5 GB, a
single-layer and double-sided DVD 9.4 GB, and
a dual-layer and double-sided DVD 17 GB.
The picture data uses the MPEG 2 format, one of
a worldwide standard of digital compression
technology. The picture data is compressed to
about 1/40 of its original size. The DVD also
uses the variable rate coding technology that
processes allocated data according to the status
of the picture.
The audio data is recorded in Dolby Digital as
well as in PCM, allowing you to enjoy more
realistic audio presence.
Furthermore, various advanced functions such
as the multi-angle, multilingual, and Parental
Control functions are provided with the DVD.
x Movie mode
The Movie mode is for use with stereo television
shows and all programs encoded in Dolby
Surround. The result is enhanced sound field
directionality that approaches the quality of
discrete 5.1-channel sound.
x Music mode
The Music mode is for use with any stereo music
recordings, and provides a wide and deep sound
space.
Dolby Surround Pro Logic
As one method of decoding Dolby Surround,
Dolby Surround Pro Logic produces four
channels from 2 channel sound. Compared with
the former Dolby Surround system, Dolby
Surround Pro Logic reproduces left-to-right
panning more naturally and localizes sounds
more precisely. To take full advantage of Dolby
Surround Pro Logic, you should have one pair of
surround speakers and a center speaker. The
surround speakers output monaural sound.
DTS
Digital audio compression technology
developed by DTS, Inc. This technology
conforms to 5.1-channel surround. This format
comprises of stereo rear channel and there is
discrete subwoofer channel in this format. DTS
provides the same 5.1 discrete channels of high
quality digital audio. The good channel
separation is realized due to the all channel data
being recorded discretely and processed in
digitally.
DVD+RW
A DVD+RW (plus RW) is a recordable and
rewritable disc. DVD+RWs use a recording
format that is comparable to the DVD VIDEO
format.
DVD-RW
A DVD-RW is a recordable and rewritable disc
that is the same size as a DVD VIDEO. The
DVD-RW has two different modes: VR mode
and Video mode. DVD-RWs created in Video
mode have the same format as a DVD VIDEO,
while discs created in VR (Video Recording)
mode allow the contents to be programmed or
edited.
File
A JPEG image or a DivX video recorded on a
DATA CD/DATA DVD. (“File” is an exclusive
definition for this system.) A single file consists
of a single image or movie.
92GB
model name [DAV-DZ1000]
[2-895-978-12(1)]
filename[I:\FM E_data\1011_DAVDZ1000_rev\2895978121\2895978121DAVDZ1000\gb12add.fm]
Film based software, Video based
software
DVDs can be classified as Film based or Video
based software. Film based DVDs contain the
same images (24 frames per second) that are
shown at movie theaters. Video based DVDs,
such as television dramas or sit-coms, displays
images at 30 frames (or 60 fields) per second.
HDMI (high-definition multimedia
interface)
HDMI is an interface that supports both video
and audio on a single digital connection,
allowing you to enjoy high quality digital
picture and sound. The HDMI specification
supports HDCP (High-bandwidth Digital
Contents Protection), a copy protection
technology that incorporates coding technology
for digital video signals.
Interlace format
(Interlaced scanning)
PCM (Pulse Code Modulation)
A method for converting analog audio to digital
audio. It is used for the Compact Disc (CD)
audio format.
Playback Control (PBC)
Signals encoded on VIDEO CDs (Version 2.0)
to control playback.
By using menu screens recorded on VIDEO
CDs with PBC functions, you can enjoy playing
simple interactive programs, programs with
search functions, and so on.
Progressive format
(sequential scanning)
In contrast to the Interlace format, the
progressive format can reproduce 50 - 60 frames
per second by reproducing all scanning lines
(525 lines for the NTSC system, 625 lines for the
PAL system). The overall picture quality
increases and still images, text and horizontal
lines appear sharper. This format is compatible
with the 525 or 625 progressive format.
Region Code
A coding system to compress digital audio
signals. MPEG-1 is used for MP3 (MPEG-1
Audio Layer-3). MPEG-2 is used for one of the
audio format of DVD.
This system is used to protect copyrights. A
region number is allocated on each DVD system
or DVD disc according to the sales region. Each
region code is shown on the system as well as on
the disc packaging. The system can play discs
that match its region code. The system can also
play discs with the “ ” mark. Even when the
region code is not shown on the DVD, the region
limit may still apply.
Multi-angle function
Scene
Various angles of a scene, or viewpoints of the
video camera are recorded on some DVDs.
On a VIDEO CD with PBC (playback control)
functions, the menu screens, moving pictures
and still pictures are divided into sections called
“scenes.”
MPEG audio
Multilingual function
Several languages for the sound or subtitles in a
picture are recorded on some DVDs.
Parental Control
A function of the DVD to limit playback of the
disc by the age of the users according to the
limitation level in each country. The limitation
varies from disc to disc; when it is activated,
playback is completely prohibited, violent
scenes are skipped or replaced with other scenes
and so on.
ALL
Additional Information
The Interlace format is the NTSC standard
method for displaying TV images at 30 frames
per second. Each frame is scanned twice alternately between the even numbered scanning
lines and then odd numbered scanning lines, at
60 times per second.
masterpage:Right
specdef v20070110
Title
The longest section of a picture or music feature
on a DVD, movie, etc., in video software, or the
entire album in audio software.
Track
Section of a picture or a music piece on a
VIDEO CD, CD, or MP3. An album is
composed of several tracks (MP3 only).
continued
93GB
model name [DAV-DZ1000]
[2-895-978-12(1)]
filename[I:\FM E_data\1011_DAVDZ1000_rev\2895978121\2895978121DAVDZ1000\gb12add.fm]
masterpage:Left
specdef v20070110
VIDEO CD
A compact disc that contains moving pictures.
The picture data uses the MPEG 1 format, one of
a worldwide standard of digital compression
technology. The picture data is compressed to
about 1/140 of its original size. Consequently, a
12 cm VIDEO CD can contain up to 74 minutes
of moving pictures.
VIDEO CDs also contain compact audio data.
Sounds outside the range of human hearing are
compressed while sounds we can hear are not
compressed. VIDEO CDs can hold six times the
audio information of conventional audio CDs.
There are two versions of VIDEO CDs.
• Version 1.1: You can play only moving
pictures and sounds.
• Version 2.0: You can play high-resolution still
pictures and enjoy PBC functions.
This system conforms to both versions.
94GB
model name [DAV-DZ1000]
[2-895-978-12(1)]
filename[I:\FM E_data\1011_DAVDZ1000_rev\2895978121\2895978121DAVDZ1000\gb12add.fm]
masterpage:Right
specdef v20070110
Language Code List
The language spellings conform to the ISO 639: 1988 (E/F) standard.
Code Language
Code Language
Code Language
1027
1028
1032
1039
1044
1045
1051
1052
1053
1057
1059
1060
1061
1066
1183
1186
1194
1196
1203
1209
1217
1226
1229
1233
1235
1239
1245
1248
1253
1254
1257
1261
1269
1283
1287
1297
1298
1299
1300
1301
1305
1307
1311
1313
1326
1327
1332
1334
1347
1349
1350
1352
1353
1356
1357
1358
1363
1365
1369
1376
1379
1393
1403
1408
1417
1428
1435
1507
1508
1509
1511
1512
1513
1514
1515
1516
1517
1521
1525
1527
1528
1529
1531
1532
1534
1535
1538
1539
1540
1543
1557
1564
1572
1581
1587
1613
1632
1665
1684
1697
1067
1070
1079
1093
1097
1103
1105
1109
1130
1142
1144
1145
1149
1150
1151
1157
1165
1166
1171
1174
1181
Afar
Abkhazian
Afrikaans
Amharic
Arabic
Assamese
Aymara
Azerbaijani
Bashkir
Byelorussian
Bulgarian
Bihari
Bislama
Bengali;
Bangla
Tibetan
Breton
Catalan
Corsican
Czech
Welsh
Danish
German
Bhutani
Greek
English
Esperanto
Spanish
Estonian
Basque
Persian
Finnish
Fiji
Faroese
French
Frisian
Irish
Scots Gaelic
Galician
Guarani
Gujarati
Hausa
Hindi
Croatian
Hungarian
Armenian
Interlingua
Interlingue
Inupiak
Indonesian
Icelandic
Italian
Hebrew
Japanese
Yiddish
Javanese
Georgian
Kazakh
Greenlandic
Cambodian
Kannada
Korean
Kashmiri
Kurdish
Kirghiz
Latin
Lingala
Laothian
Lithuanian
Latvian;
Lettish
1345 Malagasy
1436
1463
1481
1482
1483
1489
1491
1495
1498
1501
1502
1503
1505
1506
Maori
Macedonian
Malayalam
Mongolian
Moldavian
Marathi
Malay
Maltese
Burmese
Nauru
Nepali
Dutch
Norwegian
Occitan
(Afan)Oromo
Oriya
Punjabi
Polish
Pashto;
Pushto
Portuguese
Quechua
RhaetoRomance
Kirundi
Romanian
Russian
Kinyarwanda
Sanskrit
Sindhi
Sangho
SerboCroatian
Singhalese
Slovak
Slovenian
Samoan
Shona
Somali
Albanian
Serbian
Siswati
Sesotho
Sundanese
Swedish
Swahili
Tamil
Telugu
Tajik
Thai
Tigrinya
Turkmen
Tagalog
Setswana
Tonga
Turkish
Tsonga
Tatar
Twi
Ukrainian
Urdu
Uzbek
Vietnamese
Volapük
Wolof
Xhosa
Yoruba
Chinese
Zulu
Additional Information
Code Language
1703 Not specified
Parental Control Area Code List
Code Area
Code Area
Code Area
Code Area
2044
2047
2046
2057
2070
2079
2090
2092
2115
2165
2174
2109
2248
2238
2254
2276
2304
2363
2362
2376
2390
2379
2427
2424
2436
2489
2501
2149
2499
2086
2528
2184
Argentina
Australia
Austria
Belgium
Brazil
Canada
Chile
China
Denmark
Finland
France
Germany
India
Indonesia
Italy
Japan
Korea
Malaysia
Mexico
Netherlands
New Zealand
Norway
Pakistan
Philippines
Portugal
Russia
Singapore
Spain
Sweden
Switzerland
Thailand
United
Kingdom
95GB
model name [DAV-DZ1000]
[2-895-978-12(1)]
filename[I:\FM E_data\1011_DAVDZ1000_rev\2895978121\2895978121DAVDZ1000\gb12add.fm]
masterpage:Left
specdef v20070110
Index to Parts and Controls
For more information, refer to the pages indicated in parentheses.
Front panel
A "/1 (on/standby) (25)
G VOLUME control (25)
B A (open/close) (25)
H MIC 2 jack (60)
C Disc operation (25)
D FUNCTION (25)
I AUDIO IN/MIC 1/A.CAL MIC jack (14, 23,
60)
E Front panel display (98)
J Disc tray (25)
F
(remote sensor) (8)
96GB
model name [DAV-DZ1000]
[2-895-978-12(1)]
filename[I:\FM E_data\1011_DAVDZ1000_rev\2895978121\2895978121DAVDZ1000\gb12add.fm]
masterpage:Right
specdef v20070110
Rear panel
Screws*
SPEAKER
FRONT R
FRONT L
SUR R
COAXIAL
SUR L
AM
DMPORT
FM75
R AUDIO IN L
SPEAKER
CENTER
TV
DIR-TC1
WOOFER
VIDEO
DIGITAL IN
(DVD ONLY)
OUT
(DVD ONLY)
S VIDEO
COAXIAL
OPTICAL
SAT/CABLE
Y
P B/C B
P R/C R
COMPONENT VIDEO OUT
(DVD ONLY)
MONITOR OUT
VIDEO IN
R AUDIO IN L
SAT/CABLE
A SPEAKER jacks (9)
I COMPONENT VIDEO OUT jacks (19)
B DIR-TC1 slot for the WAHT-SD1 (except
for Taiwan model) (23)
J SAT/CABLE (DIGITAL IN OPTICAL)
jack (23)
C TV (AUDIO IN R/L) jacks (9)
K SAT/CABLE (DIGITAL IN COAXIAL)
jack (23)
D DMPORT (DIGITAL MEDIA PORT) jack
(except for Mexican and Latin
American models) (23, 66)
E MONITOR OUT (S VIDEO/VIDEO) jacks
(19)
F AM terminal (9)
*
CAUTION
Please do not remove the screws before
installing the WAHT-SD1.
Additional Information
G COAXIAL FM 75Ω jack (9)
L HDMI OUT jack (19)
H SAT/CABLE (AUDIO IN R/L, VIDEO IN)
jacks (23)
continued
97GB
model name [DAV-DZ1000]
[2-895-978-12(1)]
filename[I:\FM E_data\1011_DAVDZ1000_rev\2895978121\2895978121DAVDZ1000\gb12add.fm]
masterpage:Left
specdef v20070110
Front panel display
About the indications in the front panel display
A Lights up when the HDMI OUT jack is
correctly connected to HDCP (highbandwidth digital content protection)
compliant device with HDMI or DVI
(digital visual interface) input. (19)
B Lights up when the time information of
a title or chapter appears in the front
panel display. (DVD only) (42)
C Lights up when the color system is set
to NTSC. (Asian, Australian, and Middle
Eastern models only)
Lights up when an NTSC disc is
loaded. (Russian models only)
I Lights up when the karaoke mode is
on. (60)
J Current repeat mode (38)
K Lights up when the child lock function
is set to on. (67)
L Lights up when the system outputs
progressive signals (DVD function
only). (21)
M Indicates the selected [SPEAKER
FORMATION]. (71)
N Lights up when Digital Cinema Sound
(DCS) is activated. (29)
D Lights up when a station is received.
(Radio only) (55)
O Current surround format (Except for
JPEG)
E Stereo/Monaural effect (Radio only)
(56)
P Lights up when the DYNAMIC BASS is
selected. (64)
F Lights up when the sleep timer is set.
(65)
Q Displays system’s status such as
chapter, title, or track number, time
information, radio frequency, playing
status, sound field, etc.
G Lights up when the movie or music
mode is selected. (28)
H Playing status (DVD function only)
98GB
model name [DAV-DZ1000]
[2-895-978-12(1)]
filename[I:\FM E_data\1011_DAVDZ1000_rev\2895978121\2895978121DAVDZ1000\gb12add.fm]
masterpage:Right
specdef v20070110
Guide to the Control Menu Display
DISPLAY
Use the Control Menu display to select a function and to view related information. Press
repeatedly to turn on or change the Control Menu display as follows:
DISPLAY
Control Menu display
The Control Menu display 1 and 2 will show different items depending on the disc type. For details
about each item, see the pages in parentheses.
Additional Information
, Control Menu display 1
m
Control Menu display 2 (appears for certain discs only)
m
Control Menu display off
Example: Control Menu display 1 when playing a DVD VIDEO.
continued
99GB
model name [DAV-DZ1000]
[2-895-978-12(1)]
filename[I:\FM E_data\1011_DAVDZ1000_rev\2895978121\2895978121DAVDZ1000\gb12add.fm]
masterpage:Left
specdef v20070110
Currently playing title number1)
Currently playing chapter number2)
Total number of titles1)
Playback status
(N Playback,
X Pause,
x Stop, etc.)
Total number of chapters2)
Control Menu items
12 (27)
18 (34)
T
1:32:55
Selected item
Function name of
selected Control
Menu item
DVD VIDEO
Type of disc being
played3)
Playing time4)
OFF
OFF
DISC
TITLE
CHAPTER
Current setting
Options
REPEAT
ENTER
Quit:
DISPLAY
Operation message
1)
Displays the scene number for VIDEO CDs (PBC is on), track number for VIDEO CDs/CDs, album number for
DATA CDs/DATA DVDs. DivX video album number for DATA CDs/DATA DVDs.
2)
Displays the index number for VIDEO CDs, MP3 audio track number, or JPEG image file number for DATA CDs/
DATA DVDs. DivX video file number for DATA CDs/DATA DVDs.
3)
Displays Super VCD as “SVCD.” Displays “MP3” in the Control Menu display 1 or “JPEG” in the Control Menu
display 2 for DATA CDs/DATA DVDs.
4)
Displays the date for JPEG files.
To turn off the display
Press
DISPLAY.
List of Control Menu items
Item
Item Name, Function, Relevant Disc Type
[TITLE] (page 33)/[SCENE] (page 33)/[TRACK] (page 33)
Selects the title, scene, or track to be played.
[CHAPTER] (page 33)/[INDEX] (page 33)
Selects the chapter or index to be played.
[TRACK] (page 33)
Selects the track to be played.
[ORIGINAL/PLAY LIST] (page 41)
Selects the type of titles (DVD-RW/DVD-R) to be played, the [ORIGINAL] one, or an edited
[PLAY LIST].
[TIME/TEXT] (page 33)
Checks the elapsed time and the remaining playback time.
Input the time code for picture and music searching.
Displays the DVD/CD text or the MP3 track name.
100GB
model name [DAV-DZ1000]
[2-895-978-12(1)]
filename[I:\FM E_data\1011_DAVDZ1000_rev\2895978121\2895978121DAVDZ1000\gb12add.fm]
masterpage:Right
specdef v20070110
[SPEAKER FORMATION] (pages 71, 73)
Sets the speaker formation./Adjust the level of each speaker automatically.
[PROGRAM] (page 35)
Selects the track to play in the order you want.
[SHUFFLE] (page 37)
Plays the track in random order.
[REPEAT] (page 38)
Plays the entire disc (all titles/all tracks/all albums) repeatedly or one title/chapter/track/album
repeatedly.
[A/V SYNC] (page 45)
Adjusts the delay between the picture and sound.
[PARENTAL CONTROL] (page 68)
Sets to prohibit playback on this system.
[SETUP] (page 75)
[QUICK] Setup (page 14)
Use Quick Setup to choose the desired language of the on-screen display, the aspect ratio of
the TV, speaker formation, and choose yes or no to start the Auto Calibration.
[CUSTOM] Setup
In addition to the Quick Setup setting, you can adjust various other settings.
[RESET]
Returns the settings in [SETUP] to the default setting.
[ALBUM] (page 33)
Additional Information
Selects the album to be played.
[FILE] (page 33)
Selects the JPEG image file or DivX video file* to be played.
*
[DATE] (page 43)
Displays the date the picture was taken by a digital camera.
*
[INTERVAL] (page 50)
Specifies the duration for which the slides are displayed on the TV screen.
*
[EFFECT] (page 51)
Selects the effects to be used for changing slides during a slide show.
*
[MODE (MP3, JPEG)] (page 50)
Selects the data type; MP3 audio track (AUDIO), JPEG image file (IMAGE) or both (AUTO)
to be played when playing a DATA CD/DATA DVD.
List of Control Menu Items for karaoke
Item
Item Name, Function, Relevant Disc Type
[KARAOKE MODE] (page 60)
Set karaoke mode to on and off.
[SCORE MODE] (page 60)
Calculates your vocal score by comparing your voice with the music source.
[VOCAL SELECT] (page 60)
Selects different kind of vocals recorded in the disc.
* These items are not displayed when playing a DATA CD/DATA DVD with DivX video file.
continued
101GB
model name [DAV-DZ1000]
[2-895-978-12(1)]
filename[I:\FM E_data\1011_DAVDZ1000_rev\2895978121\2895978121DAVDZ1000\gb12add.fm]
masterpage:Left
specdef v20070110
Tip
• The Control Menu icon indicator lights up in green
when you select any item except [OFF]
t
([PROGRAM], [SHUFFLE], [REPEAT], [A/V SYNC], [KARAOKE MODE], and [VOCAL SELECT] only). The
[ORIGINAL/PLAY LIST] indicator lights up in green when you select [PLAY LIST] (default setting).
102GB
model name [DAV-DZ1000]
[2-895-978-12(1)]
filename[I:\FM E_data\1011_DAVDZ1000_rev\2895978121\2895978121DAVDZ1000\gb12add.fm]
masterpage:Right
specdef v20070110
DVD Setup Display List
You can set the following items with the DVD Setup Display.
The order of the displayed items may be different from the actual display.
LANGUAGE SETUP
CUSTOM SETUP
HDMI
CONTROL
STB
SYNCHRO
PAUSE
MODE
TRACK
SELECTION
MULTI-DISC
RESUME
OSD1)
MENU1)
AUDIO1)
SUBTITLE1)
AUDIO DRC
AUDIO
(HDMI)
DivX
SCREEN SETUP
YCBCR/RGB (HDMI)
COLOR
SYSTEM
(VIDEO CD)2)
SCREEN SAVER
BACKGROUND
BLACK LEVEL3)
BLACK LEVEL
(COMPONENT
OUT)3)
4:3 OUTPUT
OFF
STANDARD
MAX
OFF
ON
SPEAKER SETUP
16:9
4:3 LETTER
BOX
4:3 PAN SCAN
YCBCR
RGB
AUTO
PAL
NTSC
ON
OFF
JACKET
PICTURE
GRAPHICS
BLUE
BLACK
ON
OFF
OFF
ON
CONNECTION
FRONT
CENTER
SUBWOOFER
L
R
CENTER
SUBWOOFER
L
R
YES
YES
NONE
YES
NONE
YES
0.0 m – 7.0 m
0.0 m – 7.0 m
0.0 m – 7.0 m
0.0 m – 7.0 m
0.0 m – 7.0 m
0.0 m – 7.0 m
L
R
CENTER
SUBWOOFER
L
R
–6.0 dB – +6.0 dB
–6.0 dB – +6.0 dB
–6.0 dB – +6.0 dB
–6.0 dB – +6.0 dB
–6.0 dB – +6.0 dB
–6.0 dB – +6.0 dB
SURROUND
DISTANCE
(FRONT)
DISTANCE
(SURROUND)
LEVEL
(FRONT)
LEVEL
(SURROUND)
TEST TONE
Additional Information
TV TYPE
OFF
ON
OFF
ON
AUTO
FRAME
OFF
AUTO
ON
OFF
OFF
ON
FULL
NORMAL
1)
Select the language you want to use from the displayed language list.
2)Asian,
3)North
Australian, and Middle Eastern models only.
American, Mexican, and Latin American models only.
103GB
model name [DAV-DZ1000]
[2-895-978-12(1)]
filename[I:\FM E_data\1011_DAVDZ1000_rev\2895978121\2895978121DAVDZ1000\gb12add.fm]
masterpage:Left
specdef v20070110
System Menu List
You can set the following items with SYSTEM MENU on the remote.
System menu
MEMORY1)
FM MODE2)
NAME IN1)
SLEEP
DIMMER
MEMORY 1-20 (FM), MEMORY 1-10 (AM)
STEREO
MONO
SLEEP OFF, SLEEP 90M-1M
DIMMER OFF
DIMMER ON
DEMO
DEMO ON
DEMO OFF
ATTENUATE3)
ATT ON
ATT OFF
REV OFF
REV ON
OFF
ON
SL SR REV4)
CHILD LOCK
1)
Appears during “TUNER FM” or “TUNER AM” only.
2)
Appears during “TUNER FM” only.
3)
“ATTENUATE” may not appear, depending on the selected function.
4)Appears
when the wireless kit WAHT-SD1 is installed.
104GB
model name [DAV-DZ1000]
[2-895-978-12(1)]
filename[I:\FM E_data\1011_DAVDZ1000_rev\2895978121\2895978121DAVDZ1000\gb02regIX.fm]
masterpage:Right
specdef v20070110
Index
Numerics
16:9 77
4:3 LETTER BOX 77
4:3 OUTPUT 79
4:3 PAN SCAN 77
5.1 Channel Surround 40
A
A/V SYNC 45
ALBUM 33
Album 91
ANGLE 44
ATTENUATE 27
AUDIO 77
AUDIO (HDMI) 80
AUDIO DRC 80
Auto Calibration 73, 91
B
BACKGROUND 78
Batteries 8
BLACK LEVEL 78
BLACK LEVEL
(COMPONENT OUT) 78
C
CHAPTER 33
Chapter 91
Child Lock 67
CINEMA STUDIO EX 30
COAXIAL (Digital Out) 24
COLD RESET 83
COLOR SYSTEM (VIDEO
CD) 78
COMPONENT VIDEO OUT
21
Continuous play 25
Control Menu Display 99
Controlling the TV 58
CUSTOM 75
CUSTOM PARENTAL
CONTROL 68
CUSTOM SETUP 79
D
Digital Cinema Auto
Calibration 73, 91
Digital Cinema Sound 30
Digital connection 24
Digital Direct Twin Drive
Subwoofer 91
DIGITAL MEDIA PORT 66
DIMMER 66
DISPLAY 57
DivX® 52, 80, 91
Dolby Digital 39, 91
Dolby Pro Logic II 92
Dolby Surround Pro Logic 92
DTS 39, 92
DUAL MONO 31
DVD 92
DVD+RW 92
DVD’s menu 39
DVD-RW 41, 92
DVI 20
DYNAMIC BASS 64
I
E
L
EFFECT 51
Language Code List 95
LANGUAGE SETUP 77
Listening
a particular point on a disc 32
other components 26
TV sound 27
F
Fast forward 32
Fast reverse 32
FILE 33
File 92
Film based software 93
FM MODE 56
Freeze Frame 32
Front panel 96
Front panel display 42, 98
H
Handling discs 85
HDMI
YCBCR/RGB (HDMI) 78
HDMI (high-definition
multimedia interface) 20, 93
HDMI CONTROL 79
INDEX 33
Installing the speakers on a wall
18
Instant Advance 26
Instant Replay 26
INTERLACE 22
Interlace format 93
INTERVAL 50
J
JPEG 46, 48
K
Karaoke 60
ECHO 61
Karaoke Pon 62
Key Control 62
Score Mode 63
Vocal Select 62
M
MENU 77
Microphones 60
MODE (MP3, JPEG) 50
MOVIE/MUSIC 28
MP3 46, 48
MPEG audio 93
Multi Session CD 6
Multi-angle function 44, 93
MULTI-DISC RESUME 80
Multilingual function 93
Multiplex broadcast sound 31
MUTING 26
N
Naming preset stations 56
D. C. A. C. 73, 91
DATA CD 48, 52
DATA DVD 48, 52
DEMO 17
Demonstration 17
continued
105GB
model name [DAV-DZ1000]
[2-895-978-12(1)]
filename[I:\FM E_data\1011_DAVDZ1000_rev\2895978121\2895978121DAVDZ1000\gb02regIX.fm]
O
OPTICAL (Digital Out) 24
ORIGINAL 41
OSD 77
Other component connection
23
P
PARENTAL CONTROL 69
Parental Control 93
PAUSE MODE 80
PBC Playback 54
PCM (Pulse Code Modulation)
93
PICTURE NAVI 34, 49
PLAY LIST 41
Playback Control (PBC) 93
Program Play 35
PROGRESSIVE 22
Progressive format 21, 93
masterpage:Left
specdef v20070110
SYSTEM MENU 17, 27, 56,
65, 66, 67
System menu list 104
T
TEST TONE 82
THEATRE SYNC 59
TIME/TEXT 33
TITLE 33
Title 93
TRACK 33
Track 93
TRACK SELECTION 80
Troubleshooting 85
TV connection 19
TV TYPE 77
U
Unpacking 91
Usable discs 5
R
V
Radio 56
Radio Stations 55
Rear Panel 97
Region Code 7, 93
Remote 8, 58
Repeat Play 38
RESET 76
Resume Play 34
VIDEO CD 94
S
S VIDEO 20
Scan 32
SCENE 33
Scene 93
SCREEN SAVER 78
SCREEN SETUP 77
Searching 32
Selecting 28
SETUP 75
Setup Display 75, 103
Shuffle Play 37
SLEEP 65
Slide Show 50
Slow-motion Play 32
Sound Field 29
SPEAKER FORMATION 71
SPEAKER SETUP 81
CONNECTION 81
DISTANCE 81
LEVEL 82
STB SYNCHRO 79
SUBTITLE 45, 77
106GB
model name [DAV-DZ1000]
[2-895-978-12(1)]
filename[I:\FM E_data\1011_DAV-DZ1000_rev\2895978121\2895978121DAVDZ1000\gbbco.fm]
masterpage:Right
specdef v20061101
Remote control
BUTTON DESCRIPTIONS
ALPHABETICAL ORDER
A–O
P–Z
ANGLE 4 (44)
AUDIO** ej (39)
CLEAR ek (33, 57, 59, 76)
D.TUNING wh (56)
DISPLAY wf (42, 57)
DVD MENU 5 (39, 52)
DVD TOP MENU eh (39)
DYNAMIC BASS wg (64)
ECHO qa (61)
ENTER* 3 (14, 17, 27, 33, 55,
68)
FUNCTION +/– 2 (21, 25, 26,
34, 55, 71)
KARAOKE PON 0 (62)
KEYCON #/b ea (62)
MIC VOL +/– qs (61)
MOVIE/MUSIC el (28)
MUTING es (25)
Number buttons** ql (33, 56, 58,
68)
PICTURE NAVI qk (34, 59)
PRESET +/– 7 qg (56)
SCORE e; (63)
SLEEP r; (65)
SOUND FIELD +/–** 9 (29)
SUBTITLE wh (45)
SYSTEM MENU 6 (17, 27, 66,
104)
THEATRE SYNC wd (60)
TOOLS 6 (58)
TUNING +/– wk ef (55)
TV qf (58)
TV CH +/–** 9 (58)
TV INPUT wa (58)
TV MENU eg (58)
TV VOL +/– qd (58)
VIDEO FORMAT w; (21)
VOLUME +/– qd (25, 56, 82)
[/1 (on/standby) 1 (14, 17, 25,
34, 56)
TV [/1 (on/standby) ra (58)
C/X/x/c/
qj (14, 17, 27, 33,
55, 68)
REPLAY/
ADVANCE wj (25)
./> qg 7 (25)
m/M ef wk (32)
/
ef wk (32)
H (play)** 8 (25, 34, 69)
x (stop) wl (26, 34, 68)
X (pause) ed (26)
Z (open/close) ws (26)
DISPLAY eg (16, 33, 68, 99)
O RETURN qh (34)
-/-- ek (59)
* The ENTER button has the
same function as the
button.
When you operate the TV, the
ENTER button is used for
selecting a channel, and the
button is used for selecting
menu items (page 58).
** The H, number 5, AUDIO,
and SOUND FIELD + (TV CH
+) buttons have tactile dots.
Use the tactile dots as
references when operating the
system.
model name [DAV-DZ1000]
[2-895-978-12(1)]
filename[I:\FM E_data\1011_DAV-DZ1000_rev\2895978121\2895978121DAVDZ1000\gbbco.fm]
masterpage:Left
specdef v20061101
(1)
Sony Corporation Printed in China
model name [DAV-DZ1000]
[2-895-978-12(1)]
Download PDF
Similar pages