HPE ProLiant DL80 Generation9 (Gen9)

QuickSpecs
HPE ProLiant DL80 Generation9 (Gen9)
Overview
HPE ProLiant DL80 Generation9 (Gen9)
The HPE ProLiant DL80 Gen9 Server is designed with affordable storage, networking and processor scalability, and
manageability in a 2U server for cost conscious service provider and SMBs. Apart from basic IT infrastructure workloads this
server is ideal for running storage capacity intensive applications like cold storage, back-up due to compelling cost/GB that it
offers.
Front View
1
3
5
7
Access Panel (Top Cover)
UID button/LED
NIC status LED
Serial label pull tab
2
4
6
8
USB 2.0 connector
Health LED
Power On/Standby button and system power LED
8-bay LFF drive cage bay
Rear view
1
3
5
7
9
Slot 7 PCIe3 x16 low-profile, standup
Slot 4 PCIe3 x8 low-profile, riser (optional)
Slot 4 PCIe3 x16 low-profile, standup
Slot 1 PCIe3 x16 low-profile, standup
Slot 2 PCIe3 x8 full-height half-length riser
(optional)
2
4
6
8
Slot 6 PCIe3 x8 low-profile, standup
Slot 5 PCIe3 x8 FlexibleLOM riser (optional)
Slot 3 PCIe3 x8 low-profile, standup
Slot 1 PCIe3 x16 full-height, full-length GPU riser
(optional) or Slot 1 PCIe3 x8 (8, 4, 1) full-height,
half-length riser (optional)
10 Power supply power connection
Page 1
QuickSpecs
HPE ProLiant DL80 Generation9 (Gen9)
Overview
11 Power supply status LED
13 Embedded 2x1GbE network adapter
15 Video connector
12 Non-hot-plug power supply
14 UID LED
16 USB 3.0 connectors
Internal View
1
3
5
7
9
Fans shown with 6 Hot-swap fans
Internal USB 3.0 connector
PCIe riser kits
PCIe 3.0 slots
2 Processors, heatsink showing, with HPE Smart
Socket Guide
What's New
• HPE Smart Memory 2400 MHz memory
• Intel Xeon E5-2600v4 processor support
• HPE Trusted Platform Module (TPM) 2.0
• New 900W AC/ 240VDC power supply
• New 10TB SATA Hot Plug LFF drives
2
4
6
8
10
HPE Smart Storage Battery connector (optional)
Embedded HPE Smart Array B140i Controller
(Under) Non-Hot Plug HPE Power supply
MicroSD card slot
HPE DDR4 SmartMemory DIMM slots. Shown fully
populated in 8 slots (4 per processor)
Page 2
QuickSpecs
HPE ProLiant DL80 Generation9 (Gen9)
Standard Features
NOTE: For more information regarding Intel Xeon processors, please see the following http://www.intel.com/xeon.
Processor
One of the following
depending on model
Chipset
One of the following
depending on
model
Model
E5-2660v3
E5-2650v3
E5-2650Lv3
E5-2640v3
E5-2630v3
E5-2630Lv3
E5-2623v3
E5-2620v3
E5-2609v3
E5-2603v3
E5-2660v4
E5-2650v4
E5-2650Lv4
E5-2640v4
E5-2630v4
E5-2630Lv4
E5-2623v4
E5-2620v4
E5-2609v4
E5-2603v4
CPU
frequency
2.6GHz
2.3GHz
1.8GHz
2.6GHz
2.4GHz
1.8GHz
3.0GHz
2.4GHz
1.9GHz
1.6GHz
2.0GHz
2.2GHz
1.7GHz
2.4GHz
2.2GHz
1.8GHz
2.6GHz
2.1GHz
1.7GHz
1.7GHz
Cores
L3 Cache
Power
QPI
DDR4 Hz
10
10
12
8
8
8
4
6
6
6
14
12
14
10
10
10
4
8
8
6
25MB
25MB
30MB
20MB
20MB
20MB
10MB
15MB
15MB
15MB
35MB
30MB
35MB
25MB
25MB
25MB
10MB
20MB
20MB
15MB
105W
105W
65W
90W
85W
55W
105W
85W
85W
85W
105W
105W
65W
90W
85W
55W
85W
85W
85W
85W
9.6GT/s
9.6GT/s
9.6GT/s
8.0GT/s
8.0GT/s
8.0GT/s
8.0GT/s
8.0GT/s
6.4GT/s
6.4GT/s
9.6GT/s
9.6GT/s
9.6GT/s
8.0GT/s
8.0GT/s
8.0GT/s
8.0GT/s
8.0GT/s
6.4GT/s
6.4GT/s
2133
2133
2133
1866
1866
1866
1866
1866
1600
1600
2400
2400
2400
2133
2133
2133
2133
2133
1866
1866
Intel® C610 Series Chipset
Intel® E5-2600v3 Processor Family
Intel® E5-2600v4 Processor Family
NOTE: For more information regarding Intel chipsets, please see the following
URL: http://www.intel.com/products/server/chipsets/
On System
HPE iLO (Firmware HPE iLO4 2.0 or later) 2GB NAND
Management
NOTE: Read and learn more in the iLO QuickSpecs.
Chipset
One of the following
depending on
model
Type:
Memory
One of the following HPE SmartMemory and Standard Memory
depending on
DDR4 Registered (RDIMM) or Load Reduced (LRDIMM)
model
DIMM Slots Available
8
(4 DIMM slots per processor, 4 channels per processor, 1 DIMMs
per channel)
Maximum Capacity
256GB (8 x 32GB LRDIMM @2400MHz)
(LRDIMM)
Maximum Capacity
256GB (8 x 32GB LRDIMM @2400MHz)
(RDIMM)
Page 3
QuickSpecs
HPE ProLiant DL80 Generation9 (Gen9)
Standard Features
Memory Protection Advanced ECC
One of the following
depending on
Online spare
model
Mirroring mode
Advanced ECC uses single device data correction to detect and correct
single and all multibit error that occurs within a single DRAM chip.
Memory online spare mode detects a rank that is degrading and switches
operation to the spare rank.
Memory mirroring inter-socket stores a copy of memory with dynamic
failover in case of failure. Once a DIMM in a mirrored set is detected as
failed, the mirror failover uses its mirrored DIMM.
Expansion Slots
Motherboard slots
(Standard)
Expansio Technology
Bus
Connector
Bus
Form Factor
Notes
n Slots #
Width
Width
Number
1
PCIe 3.0
x16
x16
Low profile
CPU 1 slots
3
PCIe 3.0
x8
x8
Low profile
CPU 1 slots
4
PCIe 3.0
x16
x16
Low profile
CPU 1 slots
6
PCIe 3.0
x8
x8
Low profile
CPU 2 slots
7
PCIe 3.0
x16
x16
Low profile
CPU 2 slots
NOTE: Bus Width data indicates the number of physical electrical lanes running to the connector.
Primary Riser
Expansio Technology
Bus
Connector
Bus
Form Factor
Notes
(Optional)
n Slots #
Width
Width
Number
1
PCIe 3.0
x8
x8
Full-height, halfCPU 1 slots
length slot
2
PCIe 3.0
x8
x8
Full-height, halfCPU 1 slots
length slot
Flexible LOM Riser Expansio Technology
Bus
Connector
Bus
Form Factor
Notes
(Optional)
n Slots #
Width
Width
Number
4
PCIe 3.0
x8
x8
Low profile
CPU 1 slots
5
PCIe 3.0
x8
x8
Flexible LOM
CPU 1 slots
NOTE: This riser is mandatory for installing FlexibleLOMs.
GPU riser
Expansion Technolog Bus
Connector
Bus
Device
Form Factor
Notes
(Optional)
Slots #
y
Width
Width
Number Number
1
PCIe 3.0
x16
x16
Full-height, full- CPU 1 slots
length slot
NOTE: When populating slots on second riser, a second processor must be installed.
Storage Controller Entry Models
HPE Dynamic Smart Array B140i Controller
One of the following NOTE: Provides support for up to 10 SATA drives and data transmission speeds up to
depending on
6Gb/s and supports RAID 0, 1 & 5.
model
Base Models
HPE H240 FIO Smart Host Bus Adapter
NOTE: H240 Provides support for up to 8 SAS/SATA drives, data transmission speeds up to
12Gb/s and supports RAID 0, 1 & 5.
Internal Storage Optical Drives
Devices
Hard Drives
One of the following Hard Drive Bays
depending on
model
Maximum Internal
Storage
Hot Plug LFF SAS
Via USB only
None ship standard
12 LFF drive bays total without Optical Bay
8 LFF drive bays total without Optical Bay
CAPACITY
96.0TB
CONFIGURATION
12 x 8TB (with 12LFF drive cage)
Page 4
QuickSpecs
HPE ProLiant DL80 Generation9 (Gen9)
Standard Features
One of the following Hot Plug LFF SATA
depending on
Hot Plug LFF SATA SSD
model
Non Hot Plug LFF SATA
Power Supply
One of the following
depending on
model
96.0TB
46.08TB
32TB
12 x 8TB (with 12LFF drive cage)
12 x 3.84TB (with 12LFF drive cage)
8 x 4TB (with 8LFF drive cage)
HPE 550W FIO Power Supply
HPE 900W AC 240V DC Redundant Power Supply
Looking for high-efficiency power solutions at an entry-level price for your ProLiant Gen9 Essential
Server? HPE Entry-Level Power Supplies offer an optimized set of features with options for both
redundant and non-redundant power configurations.
The HPE 550W FIO Power Supply offers Silver-certified 80 Plus power efficiency (up to 89%) with an
optimized set of features for non-redundant power configurations.
The HPE 900W AC 240VDC Power Input Module with Power Backplane can be configured to support
power redundancy in ProLiant servers that offer only a single power supply bay, providing additional
protection against power loss. With an 80 Plus Gold power efficiency rating (up to 92%), this power
option helps to reduce operating expenses while protecting against trapped power capacity in the data
center. Hot-plug AC power input modules allow for better serviceability with fast and easy deployment
and replacement.
System Fans
Non-redundant
Redundant
One of the following 1P model
2 fans
4 fans
depending on
NOTE: Redundant and non-redundant fan counts vary with riser selection.
model
1P configurations either one of primary and secondary risers need 3 fans in non-redundant
configuration.
Non-redundant
Redundant
2P model
4 fans
5 fans
NOTE: Customers may separately purchase redundant fans with the 765516-B21 option kit.
Additional fans (two) are also included in -B21 processor option kits when upgrading from one
processor to two processors.
NOTE: All the riser option kits ship with necessary fan option kits.
Interfaces
Video
1 (Vaux Support)
LOM Network Ports
2 x 1GbE ports
SD Slot
1 Micro SD
NOTE: The SD slot is not a hot-pluggable device. Customers should not attempt to plug an SD
card into the SD slot while the server is powered.
USB
Up to 4 USB ports (standard);
Front: 1xUSB 2.0 std; (1xUSB2.0 optional upgrade with quick
release ears)
Rear: 2xUSB 3.0
Internal: 1x USB 3.0
NOTE: 12LFF drive cage models with Quick release latch rack ears supports front USB 2.0.
Operating Systems
and Virtualization
Software Support
for ProLiant
Servers
Microsoft Windows Server
Red Hat Enterprise Linux (RHEL)
SUSE Linux Enterprise Server (SLES)
Oracle Solaris
VMware
NOTE: For more information on Hewlett Packard Enterprise Certified and Supported ProLiant Servers
for OS and Virtualization Software and latest listing of software drivers available for your server,
Page 5
QuickSpecs
HPE ProLiant DL80 Generation9 (Gen9)
Standard Features
please visit our Support Matrix at: http://www.hp.com/go/ossupport and our driver download
page http://h20566.www2.hpe.com/hpsc/swd/public/readIndex?sp4ts.oid=7500990.
Upgradeability
One of the following
depending on
model
Upgradeable to 2 processors (28 cores)
NOTE: Processor upgrade from E5-2600v3 to E5-2600v4 is supported. Please refer to DL80
Gen9 User Guide for more details.
Up to 8 DIMM slots
NOTE: To take advantage of DIMMs 5-8, a second processor must be installed.
FlexibleLOM slot for 1GbE or 10GbE or QDR/FDR InfiniBand Networking Options
NOTE: To take advantage of the additional 2 PCI slot upgrade, a second processor must be
installed.
Redundant Power Supply
Redundant Fan
Industry Standard ACPI 2.0b Compliant
Compliance
PCIe 3.0 Compliant
PXE Support
WOL Support
Microsoft® Logo certifications
USB 3.0 Support
ASHRAE A3
NOTE: Supports A3 extended ambience.
NOTE: Refer to technical specifications section for more details.
Graphics
Integrated Matrox G200eH2 video standard
• 1280 x 1024 (32 bpp)
• 1920 x 1200 (16 bpp)
HPE Server
Unified Extensible Firmware Interface (UEFI) is an industry standard that provides better manageability
UEFI/Legacy ROM and more secured configuration than the legacy ROM while interacting with your server at boot time.
HPE ProLiant Gen9 platform defaults to UEFI and can be factory or field configured for Legacy BIOS
Boot Mode.
NOTE: The UEFI System Utilities function is analogous to the HPE ROM-Based Setup Utility (RBSU)
of legacy BIOS. For more information, please visit http://www.hpe.com/servers/uefi.
UEFI enables numerous new capabilities specific to HPE ProLiant servers such as:
• Secure Boot
•
Operating system specific functionality
•
Support for > 2.2 TB (using GPT) boot drives
•
USB 3.0 Stack
•
Embedded UEFI Shell
•
Mass Configuration Deployment Tool using RESTful API for iLO 4
•
PXE boot support for IPv6 networks
•
Boot support for option cards that only support a UEFI option ROM
•
Network Stack configurations
Page 6
QuickSpecs
HPE ProLiant DL80 Generation9 (Gen9)
Standard Features
NOTE: For UEFI Boot Mode, boot environment and OS image installations should be configured
properly to support UEFI.
NOTE: UEFI FIO Setting (758959-B22) can be selected to configure the system in Legacy mode in
the factory for your HPE ProLiant Gen9 Server.
Form Factor
One of the following
depending on
model
2U Rack form factor
All models ship with Easy Install rails (Cable management arm optional).
8 LFF Drive Bay Version:
3.44 (8.75cm) Height x 17.54" (44.55 cm) Width x 23.9" (60.70 cm) Length
12 LFF Drive Bay Version:
3.44 (8.75cm) Height x 17.54" (44.55 cm) Width x 23.9" (60.70 cm) Length
Embedded
Management
HPE Integrated
Lights-Out (HPE
iLO)
Monitor your servers for ongoing management, service alerting, reporting and
remote management with HPE iLO. Not available on ML10 Gen9. Learn more
at http://www.hpe.com/info/ilo.
UEFI
Configure and boot your servers securely with industry standard Unified
Extensible Firmware Interface (UEFI). Learn more
at http://www.hpe.com/servers/uefi.
RESTful API
RESTful API for iLO 4 is Redfish 1.0 conformance for simplified server
management such as configuration and maintenance tasks based on modern
industry standards. Learn more at http://www.hpe.com/info/restfulapi.
Intelligent
Provisioning
Hassle free server and OS provisioning for 1 or few servers with Intelligent
Provisioning. Learn more
at http://www.hpe.com/servers/intelligentprovisioning.
Embedded Remote Hewlett Packard Enterprise embedded remote support, when used with Insight
Support
Online direct connect or HPE Insight Remote Support, allows HPE ProLiant
servers to transmit hardware events directly to Hewlett Packard Enterprise or a
Hewlett Packard Enterprise Authorized Partner for automated phone home
support. Learn more at http://www.hpe.com/info/insightonline/explore.
Server utilities
Smart Update
Optimize firmware and driver updates with Smart Update solutions including
Smart Update Manager (SUM) and Service Pack for ProLiant (SPP) and smart
components. Learn more
at http://www.hpe.com/servers/smartupdatemanager.
HPE Systems
Insight Manager
(HPE SIM)
HPE SIM allows you to monitor the health of your HPE ProLiant Servers and
HPE Integrity Servers, and also provides you with basic support for non-HPE
servers.
HPE SIM also integrates with Smart Update Manager to provide quick and
seamless firmware updates. Learn more
at http://www.hpe.com/servers/hpsim.
Scripting Tool Kit Provision 1 to many servers using your own scripts to discover and deploy them
with Scripting Tool Kit (STK) for Windows and Linux or Scripting Tools for
and Windows
PowerShell
Windows PowerShell. Learn more
at http://www.hpe.com/servers/proliant/stk or http://www.hpe.com/server
s/powershell.
Page 7
QuickSpecs
HPE ProLiant DL80 Generation9 (Gen9)
Standard Features
RESTful Interface RESTful Interface tool is a scripting tool to provision using RESTful API for iLO 4
Tool
to discover and deploy servers at scale. Learn more
at http://www.hpe.com/info/resttool.
HPE iLO Mobile
Application
Enables the ability to access, deploy, and manage your server anytime from
anywhere from select smartphones and mobile devices. For additional
information please visit: http://www.hpe.com/info/ilo/mobileapp.
HPE Insight Online HPE Insight Online, available at no additional cost as part of your Hewlett
Packard Enterprise warranty, Care Pack or contractual support agreement with
Hewlett Packard Enterprise, is a personalized dashboard for simplified tracking of
IT operations and support information from anywhere, anytime. Learn more
at http://www.hpe.com/info/insightonline/explore.
Security
Power-on password
Serial interface control
Administrator's password
TPM 1.2
TPM 2.0
NOTE: TPM 2.0 works only in UEFI Mode.
UEFI
Warranty
This product is covered by a global limited warranty and supported by HPE Services and a worldwide
network of HPE Authorized Channel Partners resellers. Hardware diagnostic support and repair is
available for three years from date of purchase. Support for software and initial setup is available for 90
days from date of purchase. Enhancements to warranty services are available through HPE Care Pack
services or customized service agreements. Hard drives have either a one year or three year warranty;
refer to the specific hard drive QuickSpecs for details.
NOTE: Server Warranty includes 1-Year Parts, 1-Year Labor, 1-Year Onsite support with next
business day response. Warranty repairs may be accomplished through the use of Customer Self
Repair (CSR) parts. These parts fall into two categories: 1) Mandatory CSR parts are designed for
easy replacement. A travel and labor charge will result when customers decline to replace a
Mandatory CSR part; 2) Optional CSR parts are also designed for easy replacement but may involve
added complexity. Customers may choose to have Hewlett Packard Enterprise replace Optional CSR
parts at no charge. Additional information regarding worldwide limited warranty and technical
support is available at: http://h17007.www1.hpe.com/us/en/enterprise/servers/warranty/.
Page 8
QuickSpecs
HPE ProLiant DL80 Generation9 (Gen9)
Optional Features
Embedded
Management
iLO Essentials
HPE iLO Essentials is the preferred license for small and medium business that
offers full remote server management capabilities for small and medium
business via the Integrated Remote Console (IRC), virtual media, and e-mail
based alerts. Learn more about HPE iLO Essentials
at http://www.hpe.com/servers/iLO/essentials.
iLO Scale-Out
HPE iLO Scale-Out is the preferred license built for web hosting, cloud service
providers, and high performance computing data centers, managing massive
scale out environments for the DL 100 and 10 series servers, not available for
ML servers. This license offers sophisticated scripting tools that provides remote
access through Text Console via SSH, Dynamic power capping, Email-based
Alerting and proactive notifications. For more information,
visit http://www.hpe.com/servers/iLO/scale-out.
iLO Advanced
HPE iLO Advanced licenses offer smart remote functionality without
compromise, for all HPE ProLiant servers. The license includes the full
integrated remote console, virtual keyboard, video, and mouse (KVM), multiuser collaboration, console record and replay, and GUI-based and scripted
virtual media and virtual folders. You can also activate the enhanced security
and power management functionality. Learn more about HPE iLO Advanced
at http://www.hpe.com/servers/iloadvanced.
Server
Management
HPE Insight
Control
HPE Insight Control, lets you deploy, migrate, monitor, remote control, and
optimize your IT infrastructure through a single, simple management console.
For more information, see http://www.hpe.com/info/insightcontrol.
Rack and Power
Infrastructure
HPE Rack and Power Infrastructure products and services create highly efficient and intelligent solutions
for existing or new IT data centers. HPE Rack and Power infrastructure solutions – rack infrastructure,
power protection and management, performance optimized data centers (PODs) – are the foundation
you are looking for to help secure your long-term IT success. These products are designed to help you
react to changes in the industry. They deliver efficient, easy-to-use capabilities to manage, monitor,
deploy and provision infrastructure from entry to enterprise. As an industry leader, Hewlett Packard
Enterprise is uniquely positioned to address the key concerns of power, cooling, cable management and
system access.
Learn more at HPE Rack and Power Infrastructure.
High Performance HPE Cluster Platforms are specifically engineered, factory-integrated large-scale ProLiant clusters
Clusters
optimized for High Performance Computing, with a choice of servers, networks and software. Operating
system options include specially priced offerings for Red Hat Enterprise Linux and SUSE Linux
Enterprise Server, as well as Microsoft Windows HPEC Server. A Cluster Platform Configurator simplifies
ordering. http://www.hp.com/go/clusters.
HPC Interconnects NOTE: High Performance Computing (HPC) interconnect technologies are available for this server
under the HPE Cluster Platform product portfolio. These high-speed interconnects are fully supported
by Hewlett Packard Enterprise when they are part of these configure to order clusters. Solutions can
be defined with a lot of flexibility with the help of configuration tools. Please visit the following URL to
configure HPEC Clusters with InfiniBand
Interconnects: http://www.hp.com/techservers/clusters/ucp/index.html.
Storage Software
Whether you need to solve a specific data protection, archiving, or storage command and control
challenge, or deliver on strategic consolidation, compliance, or continuity initiatives, look no further
Page 9
QuickSpecs
HPE ProLiant DL80 Generation9 (Gen9)
Optional Features
than Hewlett Packard Enterprise storage software. Our storage software helps you reduce costs, simplify
storage infrastructure, protect vital assets and respond faster to business opportunities.
Storage software that gets the job done:
•
•
•
•
•
•
Data Protection and Recovery Software
Whether you're a large enterprise or a smaller business, Hewlett Packard Enterprise data
protection and recovery software will cost-effectively protect you against disaster and ensure
business continuity.
Data Archive and Migration Software
Hewlett Packard Enterprise storage software enables you to comply with data retention and
retrieval requirements, improve application performance, and reduce costs by efficiently
migrating infrequently accessed or less valuable data to lower cost storage.
Storage Resource Management Software (SRM)
Hewlett Packard Enterprise storage resource management software reduces operational costs
and provides the command and control foundation you need to efficiently manage and visualize
your physical and virtual environments.
Data Replication Software
Hewlett Packard Enterprise offers array-based and host-based replication software for use in
disaster recovery, testing, application development and reporting.
Storage Device Management Software
Maximize your investment in Hewlett Packard Enterprise storage and networking with software
that enables hardware-specific configuration, performance tuning and connectivity
management.
HPE StoreVirtual VSA
With HPE StoreVirtual VSA you can use the power of virtualization to create a virtual array
within your host server. Manage it as a single pool of shared storage capacity, and scale it to
match your evolving needs. HPE ProLiant Gen9 servers include a 3-year limited license for HPE
StoreVirtual VSA software with 1TB of capacity at no extra cost. Simply select to install HPE
StoreVirtual VSA software during server setup within Intelligent Provisioning. More information,
instructional videos, and free console management software are available
at http://www.hp.com/go/vsa1TB.
NOTE: For more information about Storage Software including QuickSpecs, please
see: http://www.hp.com/go/storage/software.
One Config Simple SCE is a guided self-service tool to help sales and non-technical people provide customers with initial
(SCE)
configurations in 3 to 5 minutes. You may then send the configuration on for configuration help, or use in
your existing ordering processes. If you require "custom" rack configuration or configuration for products
not available in SCE, please contact Hewlett Packard Enterprise Customer Business Center or an
Authorized Partner for assistance. https://h22174.www2.hp.com/SimplifiedConfig/Index.
Page 10
QuickSpecs
HPE ProLiant DL80 Generation9 (Gen9)
Service and Support
HPE Support
Services
HPE Technology Services delivers confidence, reduces risk and helps customers realize agility and stability.
Connect to Hewlett Packard Enterprise to help prevent problems and solve issues faster. HPE Support
Services enable you to choose the right service level, length of coverage and response time as you
purchase your new server, giving you full entitlement to the support for need for your IT and business.
Connect your
devices
Unlock all of the benefits of your technology investment by connecting your products to Hewlett Packard
Enterprise. Achieve up to 77%1 reduction in down time, near 100%2 diagnostic accuracy and a single
consolidated view of your environment. By connecting, you will receive 24x7monitoring, pre-failure alerts,
automatic call logging, and automatic parts dispatch. HPE Proactive Care Service and HPE Datacenter Care
Service customers will also benefit from proactive activities to help prevent issues and increase
optimization. All of these benefits are already available to you with your server storage and networking
products, securely connected to Hewlett Packard Enterprise support.
1- IDC 2 – HP CSC reports 2014 - 2015
Recommended
Support
Basic: HPE Foundation Care NBD, three-year Support Service
HPE Foundation Care Next Business Day connects you to Hewlett Packard Enterprise during business
hours for assistance on resolving issues – This service features need based next business day hardware
onsite response and software call back within two hours. In addition, Collaborative software support and
provides troubleshooting assistance on industry leading software running on your HPE server. Simplify your
support experience and make Hewlett Packard Enterprise your first call to help resolve hardware or
software problems.
https://www.hpe.com/h20195/V2/GetDocument.aspx?docname=4AA4-8876ENW&cc=us&lc=en
Standard: HPE Foundation Care 24x7, three-year Support Service
HPE Foundation Care 24x7 gives you access to Hewlett Packard Enterprise 24 hours a day, seven days a
week for assistance on resolving issues. This service includes need based Hardware onsite response within
four hours. In addition, collaborative software support is included in this service that provides
troubleshooting assistance on industry leading software running on your HPE server. Simplify your support
experience and make Hewlett Packard Enterprise your first call to help resolve hardware or software
problems.
https://www.hpe.com/h20195/V2/GetDocument.aspx?docname=4AA4-8876ENW&cc=us&lc=en
Optimized: HPE Proactive Care* with 24x7 coverage, three year Support Service
HPE Proactive Care gives customers an enhanced call experience. When your products are connected to
Hewlett Packard Enterprise, Proactive Care helps prevent problems and maintains IT stability by utilizing
personalized proactive reports with recommendations and advice. This service combines three years
proactive reporting and advice with our 24x7 coverage, four hour hardware response time when there is a
problem. This service also includes collaborative software support for Independent Software Vendors
(ISVs), (Red Hat, VMWare, Microsoft, etc.) running on your HPE servers.
Parts and
Materials
Hewlett Packard Enterprise will provide Hewlett Packard Enterprise-supported replacement parts and
materials necessary to maintain the covered hardware product in operating condition, including parts and
materials for available and recommended engineering improvements.
Parts and components that have reached their maximum supported lifetime and/or the maximum usage
limitations as set forth in the manufacturer's operating manual, product QuickSpecs, or the technical
product data sheet will not be provided, repaired, or replaced as part of these services.
The defective media retention service feature option applies only to Disk or eligible SSD/Flash Drives
replaced by Hewlett Packard Enterprise due to malfunction.
Related Services
HPE Server Hardware Installation
Provides for the basic hardware installation of Hewlett Packard Enterprise branded servers, storage devices
and networking options to assist you in bringing your new hardware into operation in a timely and
professional manner.
Page 11
QuickSpecs
HPE ProLiant DL80 Generation9 (Gen9)
Service and Support
https://www.hpe.com/h20195/V2/GetPDF.aspx/5981-9356EN.pdf
HPE Installation and Startup Service
Provides for the installation and startup of Hewlett Packard Enterprise technology including BladeSystems,
C-Class enclosure, HPE ProLiant c-Class and Integrity server blades, storage blades, SAN switch blades,
HPE Virtual Connect modules (Ethernet and Fibre Channel), Ethernet network interconnects, and
InfiniBand, as well as the installation of one supported operating system type (Windows® or Linux).
HPE Technology Services Support Credits
Offer flexible services and technical skills to meet your changing IT demands. With a menu of service that is
tailored to suit your needs, you get additional resources and specialist skills to help you maintain peak
performance of your IT. Offered as annual credits, you can plan your budgets while proactively responding
to your dynamic business.
HPE Education
Services
Keep your IT staff trained making sure they have the right skills to deliver on your business outcomes. Book
on a class today and learn how to get the most from your technology
investment. http://www.hpe.com/ww/learn
HPE Support
Center
The HPE Support Center is a personalized online support portal with access to information, tools and
experts to support Hewlett Packard Enterprise business products. Submit support cases online, chat with
Hewlett Packard Enterprise experts, access support resources or collaborate with peers.
Learn more http://www.hpe.com/support/hpesc
The Hewlett Packard Enterprise Support Center Mobile App* allows you to resolve issues yourself or
quickly connect to an agent for live support. Now, you can get access to personalized IT support anywhere,
anytime.
HPE Insight Remote Support and HPE Support Center are available at no additional cost with a Hewlett
Packard Enterprise warranty, HPE Support Service or Hewlett Packard Enterprise contractual support
agreement.
*HPE Support Center Mobile App is subject to local availability.
For more information: http://www.hpe.com/services
Page 12
QuickSpecs
HPE ProLiant DL80 Generation9 (Gen9)
Pre-configured Models
[SKU Number]
Model Name
Processor
Number of Processors
Memory
Network Controller
Storage Controller
Hard Drive
Internal Storage
Optical Drive Bay
Optical Drive
PCI-Express Slots
Power Supply
Fans
Management
Form Factor
Warranty
Entry Models
830013-B21
778640-B21
HPE ProLiant DL80
HP ProLiant DL80
Gen9 E5-2603v4 4GB- Gen9 E5-2603v3 4GBR B140i 4LFF Non-hot R B140i 4LFF 550W
PS Entry Server
Plug 550W PS Entry
Server
Intel® Xeon® E5Intel® Xeon® E52603v4
2603v3
Base Models
833869-B21
778641-B21
HPE ProLiant DL80
HP ProLiant DL80
Gen9 E5-2609v4 8GB- Gen9 E5-2609v3 8GBR H240 8LFF 550W
R H240 8LFF 550W
PS Base Server
PS Entry Server
Intel® Xeon® E52609v4
Intel® Xeon® E52609v3
One
8GB (1x8GB
4GB (1x4GB
8GB (1x8GB
8GB (1x8GB
Registered DIMMs
Registered DIMMs,
Registered DIMMs,
Registered DIMMs,
STND, 2400 MHz)
2133 MHz)
2400 MHz)
2133 MHz)
NOTE: Due to
NOTE: Due to
NOTE: Due to
NOTE: Due to
processor limitation,
processor limitation,
processor limitation,
processor limitation,
these DDR4 DIMMs
these DDR4 DIMMs
these DDR4 DIMMs
these DDR4 DIMMs
will operate at 1833
will operate at 1600
will operate at 1833
will operate at 1600
MHz in this model.
MHz in this model.
MHz in this model.
MHz in this model.
HPE Embedded Dual Port 361i Adapter Network Interface
HPE Dynamic Smart Array B140i
HPE H240 Smart Host
HPE H240 FIO Smart
Bus Adapter
Host Bus Adapter
None ship standard
4 LFF HDD Bays (Non Hot Plug)
8 LFF HDD Bays
Not Available
Optional via HPE Mobile USB DVDRW Drive (701498-B21)
3 PCIe 3.0 slots (Without risers)
(1) HPE 550W FIO Power Supply
2 hot swap fans, non-redundant
4 hot plug fans,
4 hot swap fans,
redundant
redundant
iLO Management (standard), Intelligent Provisioning (standard), iLO Essentials (optional), iLO Scaleout (optional only for DL), iLO Advanced (optional)
Rack (2U), HPE Easy Install Rails
Server Warranty includes 1-Year Parts, 1-Year Labor, 1-Year Onsite support with next business day
response
Country Code Key xx1 = B21
Worldwide
NOTE: The -B21 WW SKU is to be ordered in all countries other than Japan or PRC.
xx1 = 291
Japan
xx1 = AA1
PRC
Page 13
QuickSpecs
HPE ProLiant DL80 Generation9 (Gen9)
Configuration Information - Factory Integrated Models
This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid configurations are
ordered, Hewlett Packard Enterprise recommends the use of an HPE approved configurator. Contact your local sales
representative for information on configurable product offerings and requirements.
1. Factory Integrated Models must start with a CTO Server.
2. FIO indicates that this option is only available as a factory installable option.
3. All Factory Integrated Models will be populated with sufficient hard drive blanks based on the number of initial hard drives
ordered with the server.
4. Some options may not be integrated at the factory. Contact your local sales representative for additional information.
Step 1: Base Configuration (choose one of the following configurable models)
[Chassis]
HP ProLiant DL80 Gen9 NonHP ProLiant DL80 Gen9
HP ProLiant DL80 Gen9
hot Plug 4LFF Configure-to8LFF Configure-to-order
12LFF Configure-to-order
order Server
Server
Server
778686-B21
778685-B21
787217-B21
2 (optional) x HPE Smart Socket Guide
8 DIMM slots for RDIMM, LRDIMM DDR4 Memory
HPE Dynamic Smart Array B140i
5 Low Profile PCIe 3.0 slots
4LFF Non Hot Plug
8LFF Hot Plug
12LFF Hot Plug
HPE Embedded Dual Port 361i Adapter Network Interface
2 hot swap fans, non-redundant
iLO Management (standard), Intelligent Provisioning (standard)
1 front, 1 internal, 2 rear
SKU Number
Processor
DIMM Slots
Storage Controller
PCIe
Drive Cage
Network Controller
Fans
Management
USB
Step 2: Choose Required Options (only one of the following from each list unless otherwise
noted)
HPE
Processors
Select one or two processors from Core Options-Processor section below,
• If one processor is desired, select one xxxxxx-L21
• If two processors are desired, select one xxxxxx-L21 and one xxxxxx-B21.
• Up to 2 processors supported. Mixing different processor models is not
supported.
• DDR4 speed is the maximum memory speed of the processor. Actual memory
speed may depend on the quantity and type of DIMMs installed.
For the Intel® C600 Chipset E5-2600 Series, the letter preceding the model number
indicates the Product Line (E3, E5, E7); 2600x v#, 2 = number of CPUs in a Node, 6 is
socket/segment designation, 00 = Processor SKU, x = L for low power SKUs and v#
(not yet designated) = version number.
HPE Memory
Select one or more memory from Core Options-Memory section below,
•
•
UDIMM, RDIMM, and LRDIMM are all distinct memory technologies and cannot
be mixed within a server.
HPE memory options from previous generation servers are not qualified or
warranted with Hewlett Packard Enterprise Gen9 systems. HPE SmartMemory
is required to realize the memory performance improvements and enhanced
functionality listed in this document for Gen9.
Page 14
QuickSpecs
HPE ProLiant DL80 Generation9 (Gen9)
Configuration Information - Factory Integrated Models
HPE Power
Supplies
•
If only one processor is installed, only half of the total DIMM slots are available.
When populating with two processors all DIMM slots are available.
•
Depending on the memory configuration and processor model, the memory
speed may run at 2400MHz, 2133MHz, 1866MHz or 1600MHz. Please see
Memory Population Table or the Online Memory Configuration Tool
at: http://www.hpe.com/go/ddr4config.
Select one or more power supplies from Core Options-Power Supplies section below:
• Prior to selecting a power supply option, it is highly recommended that you
review your server configuration in the HPE Power Advisor tool to determine
the right size power supply for your server configuration. The HPE Power
Advisor is located at: http://www.hpe.com/go/hppoweradvisor.
• By RPS Enablement Kit power options, mixing of power supplies in the same
RPS enablement kit is not supported. All power supplies must be of the same
input voltage, output rating, and efficiency rating. If non-matching power
supplies are installed, you may receive an error message and/or experience
operational issues with your server.
Step 3: Choose Additional Factory Integratable Options
HPE Unique
Options
Select one or more Unique options from Core Options section below.
•
•
HPE Drives
Select one or more drives from Core Options-HPE Drives section below:
•
•
•
HPE
FlexibleLOM
This section may contain FIO options, please see the Unique options section
below.
FIO indicates that this option is only available as a factory installable option.
The components of a storage subsystem (e.g. the drive, the HBA/controller,
firmware, and the server backplane) should operate at the same data transfer
rate or the system bandwidth will be negotiated down to an acceptable level
for all components.
Hard drives have either a one year or three year warranty; refer to the specific
hard drive QuickSpecs for details.
The HPE ProLiant Gen9 Smart Storage solutions are equipped with redesigned Small Form Factor (SFF 2.5 in) and Large Form Factor (LFF 3.5 in)
hot plug carriers for HPE Qualified Hard Drives and Solid State Drives. These
new carriers provide status and activity indicators as well as caution indicators
for "Do Not Remove."
Select a FlexibleLOM from Core Options-Networking section below,
•
•
•
Only one FlexibleLOM can be added to the server. These options are
upgradeable and can be changed from the original configuration after the
server is shipped.
For 10Gb adapters, a minimum of two Gigabytes (2 GB) of server memory is
required per each adapter.
Please see the QuickSpecs for Technical Specifications and additional
information: http://www.hpe.com/go/ProLiantNICs.
Page 15
QuickSpecs
HPE ProLiant DL80 Generation9 (Gen9)
Configuration Information - Factory Integrated Models
HPE
Networking
Select a standup NIC adapter from Core Options-Networking section below,
•
•
•
Please see the QuickSpecs for Technical Specifications and additional
information: http://www.hpe.com/go/ProLiantNICs.
These options are upgradeable and can be changed from the original
configuration after the server is shipped.
For 10Gb adapters, a minimum of two Gigabytes (2 GB) of server memory is
required per each adapter.
HPE Graphics Select one or more graphics adapter from Additional Options section below.
Options
• Please see the HPE Power Advisor for estimated power consumption of your
individual system configuration prior to installing GPUs. The HPE Power
Advisor is located at: http://www.hpe.com/go/hpepoweradvisor.
•
HPE Cooling
Options
Select one or more Fan Kits from Core Options section below.
•
•
HPE Storage
Controllers
This section may contain FIO options, please see HPE Cooling Options section
below.
FIO indicates that this option is only available as a factory installable option.
Select one or more Storage options from Additional Options section below.
•
•
•
HPE I/O
Expansion
Options
This section may contain FIO options, please see HPE Computation & Graphics
Accelerators section below.
The embedded B140i controller will operate in UEFI only mode. For legacy
support an additional controller will be needed, and for CTO orders please also
select the Legacy mode settings part, 758959-B22.
This section may contain FIO options, please see HPE Storage
Controllers section below.
FIO indicates that this option is only available as a factory installable option.
Select one or more Riser Kit options from Core Options section below.
•
•
•
To take advantage of the additional PCI slot upgrade, the second processor
must be installed.
This section may contain FIO options, please see HPE I/O Expansion Options
section below.
FIO indicates that this option is only available as a factory installable option.
HPE Rail Kits Select one type of rail kit from Additional Options section below.
•
•
•
Please take a moment to review the installation documentation that comes
with the server to help you with the installation of your Gen9 server.
To assist in the installation of the server into the rack, an optional installation
tool is available by contacting your local services representative (p/n 695539001).
See Hewlett Packard Enterprise Rack Options in Additional Options section of
this QuickSpecs for more rack kit choices.
Page 16
QuickSpecs
HPE ProLiant DL80 Generation9 (Gen9)
Configuration Information - Factory Integrated Models
CAUTION: Hewlett Packard Enterprise recommends that a minimum of two people are
required for all Rack Server installations. Please refer to your installation instructions for
proper tools and number of people to use for any installation.
Page 17
QuickSpecs
HPE ProLiant DL80 Generation9 (Gen9)
Core Options
NOTE: Some options may not be integrated at the factory. To ensure only valid configurations are ordered, Hewlett Packard
Enterprise recommends the use of an HPE approved configurator. Contact your local sales representative for additional
information.
HPE Unique
HP DL80 Gen9 8LFF Non-hot Plug Enablement Kit
788355-B21
Options
NOTE: Required to upgrade from 4LFF NHP to 8LFF NHP models.
HP DL80 Gen9 Full Height Half Length Riser Kit
765515-B21
NOTE: Includes two FHHL PCIe 3.0 slots and one fan.
HP DL80 Gen9 GPU Enablement Kit
765518-B21
NOTE: Includes 1 FHFL slot, one fan and power cable required to enable GPU
support. Either one of FHHL or FlexibleLOM riser or GPU riser can be selected.
HP DL80 Gen9 FlexibleLOM Riser Kit
765514-B21
NOTE: Includes one FlexibleLOM slot, one Low Profile slot and one fan.
HP AHCI-Enable FIO Setting
801845-B21
NOTE: This needs to be selected when Advanced Host Controller Interface
mode is required on B140i controller.
HPE Processors
E5-2600v4 series Processors
HPE DL80 Gen9 Intel® Xeon® E5-2609v4 (1.7GHz/8-core/20MB/85W)
Processor Kit
HPE DL80 Gen9 Intel® Xeon® E5-2609v4 (1.7GHz/8-core/20MB/85W) FIO
Processor Kit
HPE DL80 Gen9 Intel® Xeon® E5-2603v4 (1.7GHz/6-core/15MB/85W)
Processor Kit
HPE DL80 Gen9 Intel® Xeon® E5-2603v4 (1.7GHz/6-core/15MB/85W) FIO
Processor Kit
HPE DL80 Gen9 Intel® Xeon® E5-2650Lv4 (1.7GHz/14-core/35MB/65W)
Processor Kit
HPE DL80 Gen9 Intel® Xeon® E5-2650Lv4 (1.7GHz/14-core/35MB/65W) FIO
Processor Kit
HPE DL80 Gen9 Intel® Xeon® E5-2630Lv4 (1.8GHz/10-core/25MB/55W)
Processor Kit
HPE DL80 Gen9 Intel® Xeon® E5-2630Lv4 (1.8GHz/10-core/25MB/55W) FIO
Processor Kit
HPE DL80 Gen9 Intel® Xeon® E5-2620v4 (2.1GHz/8-core/20MB/85W)
Processor Kit
HPE DL80 Gen9 Intel® Xeon® E5-2620v4 (2.1GHz/8-core/20MB/85W) FIO
Processor Kit
HPE DL80 Gen9 Intel® Xeon® E5-2623v4 (2.6GHz/4-core/10MB/85W)
Processor Kit
HPE DL80 Gen9 Intel® Xeon® E5-2623v4 (2.6GHz/4-core/10MB/85W) FIO
Processor Kit
HPE DL80 Gen9 Intel® Xeon® E5-2660v4 (2.0GHz/14-core/35MB/105W)
Processor Kit
HPE DL80 Gen9 Intel® Xeon® E5-2660v4 (2.0GHz/14-core/35MB/105W) FIO
Processor Kit
HPE DL80 Gen9 Intel® Xeon® E5-2650v4 (2.2GHz/12-core/30MB/105W)
Processor Kit
HPE DL80 Gen9 Intel® Xeon® E5-2650v4 (2.2GHz/12-core/30MB/105W) FIO
Processor Kit
803091-B21
803091-L21
803093-B21
803093-L21
803095-B21
803095-L21
803097-B21
803097-L21
803087-B21
803087-L21
803089-B21
803089-L21
803079-B21
803079-L21
803081-B21
803081-L21
Page 18
QuickSpecs
HPE ProLiant DL80 Generation9 (Gen9)
Core Options
HPE DL80 Gen9 Intel® Xeon® E5-2640v4 (2.4GHz/10-core/25MB/90W)
Processor Kit
HPE DL80 Gen9 Intel® Xeon® E5-2640v4 (2.4GHz/10-core/25MB/90W) FIO
Processor Kit
HPE DL80 Gen9 Intel® Xeon® E5-2630v4 (2.2GHz/10-core/25MB/85W)
Processor Kit
HPE DL80 Gen9 Intel® Xeon® E5-2630v4 (2.2GHz/10-core/25MB/85W) FIO
Processor Kit
E5-2600v3 series Processors
HP DL80 Gen9 Intel® Xeon® E5-2603v3 (1.6GHz/6-core/15MB/85W) Processor
Kit
HP DL80 Gen9 Intel® Xeon® E5-2603v3 (1.6GHz/6-core/15MB/85W) FIO
Processor Kit
HP DL80 Gen9 Intel® Xeon® E5-2609v3 (1.9GHz/6-core/15MB/85W) Processor
Kit
HP DL80 Gen9 Intel® Xeon® E5-2609v3 (1.9GHz/6-core/15MB/85W) FIO
Processor Kit
HP DL80 Gen9 Intel® Xeon® E5-2620v3 (2.4GHz/6-core/15MB/85W) Processor
Kit
HP DL80 Gen9 Intel® Xeon® E5-2620v3 (2.4GHz/6-core/15MB/85W) FIO
Processor Kit
HP DL80 Gen9 Intel® Xeon® E5-2630v3 (2.4GHz/8-core/20MB/85W) Processor
Kit
HP DL80 Gen9 Intel® Xeon® E5-2630v3 (2.4GHz/8-core/20MB/85W) FIO
Processor Kit
HP DL80 Gen9 Intel® Xeon® E5-2630Lv3 (1.8GHz/8-core/20MB/55W)
Processor Kit
HP DL80 Gen9 Intel® Xeon® E5-2630Lv3 (1.8GHz/8-core/20MB/55W) FIO
Processor Kit
HP DL80 Gen9 Intel® Xeon® E5-2640v3 (2.6GHz/8-core/20MB/90W) Processor
Kit
HP DL80 Gen9 Intel® Xeon® E5-2640v3 (2.6GHz/8-core/20MB/90W) FIO
Processor Kit
HP DL80 Gen9 Intel® Xeon® E5-2623v3 (3GHz/4-core/10MB/105W) Processor
Kit
HP DL80 Gen9 Intel® Xeon® E5-2623v3 (3GHz/4-core/10MB/105W) FIO
Processor Kit
HP DL80 Gen9 Intel® Xeon® E5-2650v3 (2.3GHz/10-core/25MB/105W)
Processor Kit
HP DL80 Gen9 Intel® Xeon® E5-2650v3 (2.3GHz/10-core/25MB/105W) FIO
Processor Kit
HP DL80 Gen9 Intel® Xeon® E5-2660v3 (2.6GHz/10-core/25MB/105W)
Processor Kit
HP DL80 Gen9 Intel® Xeon® E5-2660v3 (2.6GHz/10-core/25MB/105W) FIO
Processor Kit
HP DL80 Gen9 Intel® Xeon® E5-2650Lv3 (1.8GHz/12-core/30MB/65W)
Processor Kit
HP DL80 Gen9 Intel® Xeon® E5-2650Lv3 (1.8GHz/12-core/30MB/65W) FIO
Processor Kit
803083-B21
803083-L21
803085-B21
803085-L21
765521-B21
765521-L21
765523-B21
765523-L21
765525-B21
765525-L21
765526-B21
765526-L21
765530-B21
765530-L21
765531-B21
765531-L21
780100-B21
780100-L21
765528-B21
765528-L21
765529-B21
765529-L21
765532-B21
765532-L21
Page 19
QuickSpecs
HPE ProLiant DL80 Generation9 (Gen9)
Core Options
NOTE: Processor upgrade from E5-2600v3 to E5-2600v4 is supported. Please refer to DL80 Gen9 User
Guide for more details.
HPE Memory
Registered DIMMs (RDIMMs) for E5-2600v4 Series
HP 8GB (1x8GB) Single Rank x8 DDR4-2400 CAS-17-17-17 Registered Memory
805347-B21
Kit
HP 16GB (1x16GB) Single Rank x4 DDR4-2400 CAS-17-17-17 Registered
805349-B21
Memory Kit
HPE 16GB (1x16GB) Dual Rank x4 DDR4-2400 CAS-17-17-17 Registered
836220-B21
Memory Kit
HP 32GB (1x32GB) Dual Rank x4 DDR4-2400 CAS-17-17-17 Registered
805351-B21
Memory Kit
NOTE: These DIMMs are supported only with E5-2600v4 processors.
Registered DIMMs (RDIMMs) for E5-2600v3 Series
HP 4GB (1x4GB) Single Rank x8 DDR4-2133 CAS-15-15-15 Registered Memory
726717-B21
Kit
HP 8GB (1x8GB) Single Rank x4 DDR4-2133 CAS-15-15-15 Registered Memory
726718-B21
Kit
HP 8GB (1x8GB) Dual Rank x8 DDR4-2133 CAS-15-15-15 Registered Memory
759934-B21
Kit
HP 16GB (1x16GB) Dual Rank x4 DDR4-2133 CAS-15-15-15 Registered
726719-B21
Memory Kit
HP 32GB (1x32GB) Dual Rank x4 DDR4-2133 CAS-15-15-15 Registered
728629-B21
Memory Kit
NOTE: These DIMMs are supported only with E5-2600v3 processors.
Load Reduced DIMMs (LRDIMMs) for E5-2600v4 Series
HPE 32GB (1x32GB) Dual Rank x4 DDR4-2400 CAS-17-17-17 Load Reduced
805353-B21
Memory Kit
NOTE: These DIMMs are supported only with E5-2600v4 processors.
Load Reduced DIMMs (LRDIMMs) for E5-2600v3 Series
HP 16GB (1x16GB) Dual Rank x4 DDR4-2133 CAS-15-15-15 Load Reduced
726720-B21
Memory Kit
HP 32GB (1x32GB) Quad Rank x4 DDR4-2133 CAS-15-15-15 Load Reduced
726722-B21
Memory Kit
NOTE: These DIMMs are supported only with E5-2600v3 processors.
HPE Standard Memory for E5-2600v4 Series
HPE 8GB (1x8GB) Single Rank x8 DDR4-2400 CAS-17-17-17 Registered
851353-B21
Standard Memory Kit
NOTE: These memory options are available as standalone only and cannot be configured in the factory.
These are standard memory DIMMs with no Smart Memory features.
NOTE: These DIMMs are supported only with E5-2600v4 processors.
HPE Standard Memory for E5-2600v3 Series
HP 4GB (1x4GB) Single Rank x8 DDR4-2133 CAS-15-15-15 Registered
803026-B21
Standard Memory Kit
HP 8GB (1x8GB) Single Rank x4 DDR4-2133 CAS-15-15-15 Registered
803028-B21
Standard Memory Kit
NOTE: These memory options are available as standalone only and cannot be configured in the factory.
These are standard memory DIMMs with no Smart Memory features.
NOTE: These DIMMs are supported only with E5-2600v3 processors.
Page 20
QuickSpecs
HPE ProLiant DL80 Generation9 (Gen9)
Core Options
HPE Optical Drives HP Mobile USB Non Leaded System DVD RW Drive
HPE Drives
SATA Non-Hot Plug LFF (3.5-inch) Midline (MDL) Drives
HP 4TB 6G SATA 7.2K rpm LFF (3.5in) Non-hot Plug Standard 1yr Warranty
Hard Drive
HP 3TB 6G SATA 7.2K rpm LFF (3.5-inch) Non-hot plug Midline 1yr Warranty
Hard Drive
HP 3TB 6G SATA 7.2K rpm LFF (3.5in) Non-hot Plug Standard 1yr Warranty
Hard Drive
HP 2TB 6G SATA 7.2K rpm LFF (3.5-inch) Non-hot plug Midline 1yr Warranty
Hard Drive
HP 2TB 6G SATA 7.2K rpm LFF (3.5in) Non-hot Plug Standard 1yr Warranty
Hard Drive
HP 1TB 6G SATA 7.2K rpm LFF (3.5-inch) Non-hot plug Midline 1yr Warranty
Hard Drive
HP 1TB 6G SATA 7.2K rpm LFF (3.5in) Non-hot Plug Standard 1yr Warranty
Hard Drive
HP 500GB 6G SATA 7.2K rpm LFF (3.5-inch) Non-hot plug Midline 1yr Warranty
Hard Drive
SATA Hot Plug LFF (3.5-inch) Midline (MDL) Drives
HPE 8TB 6G SATA 7.2K rpm LFF (3.5in) 512e SC Midline 1yr Warranty Hard
Drive
HP 6TB 6G SATA 7.2K rpm LFF (3.5-inch) SC Midline 512e 1yr Warranty Hard
Drive
HP 4TB 6G SATA 7.2K rpm LFF (3.5-inch) SC Midline 512e 1yr Warranty Hard
Drive
HP 6TB 6G SATA 7.2K rpm LFF (3.5-inch) SC Midline 1yr Warranty Hard Drive
HP 4TB 6G SATA 7.2k rpm LFF (3.5-inch) SC Midline 1yr Warranty Hard Drive
HPE 4TB 6G SATA 7.2K rpm LFF (3.5in) SC Midline 1yr Warranty Hard Drive
HP 3TB 6G SATA 7.2K rpm LFF (3.5-inch) SC Midline 1yr Warranty Hard Drive
HP 2TB 6G SATA 7.2K rpm LFF (3.5-inch) SC Midline 1yr Warranty Hard Drive
HPE 2TB 6G SATA 7.2K rpm LFF (3.5in) SC Midline 1yr Warranty Hard Drive
HP 1TB 6G SATA 7.2K rpm LFF (3.5-inch) SC Midline 1yr Warranty Hard Drive
HP 500GB 6G SATA 7.2K rpm LFF (3.5-inch) SC Midline 1yr Warranty Hard Drive
HPE 10TB 6G SATA 7.2K rpm LFF (3.5in) 512e SC Midline 1yr Warranty Hard
Drive
HPE 8TB 6G SATA 7.2K rpm LFF (3.5in) 512e SC Midline 1yr Warranty Hard
Drive
HPE 1TB 6G SATA 7.2K rpm LFF (3.5in) SC Midline 1yr Warranty Hard Drive
HPE 3TB 6G SATA 7.2K rpm LFF (3.5in) SC Midline 1yr Warranty Hard Drive
6G SATA SC Hot Plug LFF 7.2K (3.5-inch) Standard Drives
HPE 1TB 6G SATA 7.2K rpm LFF (3.5in) SC Standard 1yr Warranty Hard Drive
HPE 2TB 6G SATA 7.2K rpm LFF (3.5in) SC Standard 1yr Warranty Hard Drive
6G SATA Hot Plug LFF (3.5-inch) SC 512e Performance Drives
HP 4TB 6G SATA 7.2K rpm LFF (3.5-inch) SC 512e Performance 1yr Warranty
Hard Drives
HP 6TB 6G SATA 7.2K rpm LFF (3.5-inch) SC 512e Performance 1yr Warranty
Hard Drive
701498-B21
801888-B21
628065-B21
801886-B21
659339-B21
801884-B21
659337-B21
801882-B21
659341-B21
819203-B21
765255-B21
765253-B21
753874-B21
693687-B21
861678-B21
628061-B21
658079-B21
861676-B21
657750-B21
658071-B21
857648-B21
861594-B21
861691-B21
861693-B21
858594-B21
858596-B21
793665-B21
793667-B21
Page 21
QuickSpecs
HPE ProLiant DL80 Generation9 (Gen9)
Core Options
6G SATA Hot Plug with SmartDrive LFF (3.5-inch) Midline 512e Helium Drives
HP 8TB 6G SATA 7.2K rpm LFF (3.5-inch) SC 512e Helium 1yr Warranty Hard
Drive
HP 6TB 6G SATA 7.2K rpm LFF (3.5-inch) SC 512e Helium 1yr Warranty Hard
Drive
SAS Hot Plug LFF (3.5-inch) Midline (MDL) Drives
HPE 8TB 12G SAS 7.2K rpm LFF (3.5in) 512e SC Midline 1yr Warranty Hard
Drive
HP 6TB 12G SAS 7.2K rpm LFF (3.5-inch) SC Midline 512e 1yr Warranty Hard
Drive
HP 6TB 6G SAS 7.2K rpm LFF (3.5-inch) SC Midline 1yr Warranty Hard Drive
HP 4TB 6G SAS 7.2K rpm LFF (3.5-inch) SC Midline 1yr Warranty Hard Drive
HP 4TB 12G SAS 7.2K rpm LFF (3.5-inch) SC Midline 512e 1yr Warranty Hard
Drive
HPE 4TB 12G SAS 7.2K rpm LFF (3.5-inch) SC Midline 1yr Warranty Hard Drive
HP 3TB 6G SAS 7.2K rpm LFF (3.5-inch) SC Midline 1yr Warranty Hard Drive
HP 2TB 6G SAS 7.2K rpm LFF (3.5-inch) SC Midline 1yr Warranty Hard Drive
HP 1TB 6G SAS 7.2K rpm LFF (3.5-inch) SC Midline 1yr Warranty Hard Drive
HPE 2TB 12G SAS 7.2K rpm LFF (3.5-inch) SC Midline 1yr Warranty Hard Drive
HPE 1TB 12G SAS 7.2K rpm LFF (3.5in) SC Midline 1yr Warranty Hard Drive
HPE 3TB 12G SAS 7.2K rpm LFF (3.5in) SC Midline 1yr Warranty Hard Drive
SAS Hot Plug LFF (3.5-inch) Enterprise (ENT) Drives
HP 600GB 12G SAS 15K rpm LFF (3.5-inch) SC Converter Enterprise 3yr
Warranty Hard Drive
HP 450GB 12G SAS 15K rpm LFF (3.5-inch) SC Converter Enterprise 3yr
Warranty Hard Drive
HP 300GB 12G SAS 15K rpm LFF (3.5-inch) SC Converter Enterprise 3yr
Warranty Hard Drive
12G SAS Hot Plug LFF (3.5-inch) SC 512e Performance Drives
HP 4TB 12G SAS 7.2K rpm LFF (3.5-inch) SC 512e Performance 1yr Warranty
Hard Drive
HP 6TB 12G SAS 7.2K rpm LFF (3.5-inch) SC 512e Performance 1yr Warranty
Hard Drive
12G SAS Hot Plug SmartDrive LFF (3.5-inch) Midline 512e Helium Drives
HP 8TB 12G SAS 7.2K rpm LFF (3.5-inch) SC 512e Helium 1yr Warranty Hard
Drive
HP 6TB 12G SAS 7.2K rpm LFF (3.5-inch) SC 512e Helium 1yr Warranty Hard
Drive
12G SAS Hot Plug LFF (3.5-inch) Enterprise Value Solid State Drives
HP 1.6TB 12G SAS Value Endurance LFF 3.5-in SC Enterprise Value 3yr Wty
Solid State Drive
HP 800GB 12G SAS Value Endurance LFF 3.5-in SC Enterprise Value 3yr Wty
Solid State Drive
6G SATA Hot Plug LFF (3.5-inch) Enterprise Mainstream Solid State Drives
HP 200GB 6G SATA Write Intensive-2 LFF 3.5-in SCC 3yr Wty Solid State Drive
HP 400GB 6G SATA Write Intensive-2 LFF 3.5-in SCC 3yr Wty Solid State Drive
HP 800GB 6G SATA Write Intensive-2 LFF 3.5-in SCC 3yr Wty Solid State Drive
HP 1.2TB 6G SATA Write Intensive-2 LFF 3.5-in SCC 3yr Wty Solid State Drive
793695-B21
793683-B21
819201-B21
765259-B21
761477-B21
695510-B21
765257-B21
818367-B21
652766-B21
652757-B21
652753-B21
818365-B21
846524-B21
846528-B21
765424-B21
737394-B21
737261-B21
793669-B21
793671-B21
793703-B21
793699-B21
762272-B21
762270-B21
804642-B21
804668-B21
804674-B21
804680-B21
Page 22
QuickSpecs
HPE ProLiant DL80 Generation9 (Gen9)
Core Options
6G SATA Hot Plug LFF Value Endurance (3.5-inch) Converter Enterprise
Value M1 Solid State Drives
HP 200GB 6G SATA Mixed Use-2 LFF 3.5-in SCC 3yr Wty Solid State Drive
HP 800GB 6G SATA Mixed Use-2 LFF 3.5-in SCC 3yr Wty Solid State Drive
HP 1.6TB 6G SATA Mixed Use-2 LFF 3.5-in SCC 3yr Wty Solid State Drive
HP 480GB 6G SATA Mixed Use-2 LFF 3.5-in SCC 3yr Wty Solid State Drive
6G SATA Hot Plug LFF (3.5-inch) Enterprise Value Solid State Drives
HP 80GB 6G SATA Read Intensive-2 LFF 3.5-in SCC 3yr Wty Solid State Drive
HP 120GB 6G SATA Read Intensive-2 LFF 3.5-in SCC 3yr Wty Solid State Drive
HP 240GB 6G SATA Read Intensive-2 LFF 3.5-in SCC 3yr Wty Solid State Drive
HP 480GB 6G SATA Read Intensive-2 LFF 3.5-in SCC 3yr Wty Solid State Drive
HP 800GB 6G SATA Read Intensive-2 LFF 3.5-in SCC 3yr Wty Solid State Drive
HP 1.6TB 6G SATA Read Intensive-2 LFF 3.5-in SCC 3yr Wty Solid State Drive
6G SATA Hot Plug LFF (3.5-inch) RI-3 SCC SSD
HP 3.84TB 6G SATA Read Intensive-3 LFF 3.5-in SC Converter 3yr Wty Solid
State Drive
6G SATA Hot Plug LFF (3.5-inch) MU-3 SCC SSD
HP 960GB 6G SATA Mixed Use-3 LFF 3.5-in SC Converter 3yr Wty Solid State
Drive
HP 480GB 6G SATA Mixed Use-3 LFF 3.5-in SC Converter 3yr Wty Solid State
Drive
M.2 SSD
HP Dual 120GB Value Endurance Solid State M.2 Enablement Kit for ProLiant
ML/DL Servers
HP 120GB Value Endurance Solid State M.2 Enablement Kit for ProLiant ML/DL
Servers
NOTE: M.2 drives go in PCIe slot and use B140i SATA controller only.
Hard Drive Blank Kits
HP Large Form Factor Hard Drive Blank Kit
Hard Drive Kits
HP DL80 Gen9 8LFF Non-hot Plug Enablement Kit
NOTE: Required to move from 4LFF NHPE model to 8 LFF NHPE model.
HPE Networking
1 Gigabit Ethernet adapters
HP Ethernet 1Gb 4-port 331T Adapter
HP Ethernet 1Gb 4-port 366T Adapter
HP Ethernet 1Gb 2-port 332T Adapter
HP Ethernet 1Gb 2-port 361T Adapter
10 Gigabit Ethernet adapters
HP Ethernet 10Gb 2-port 530SFP Adapter
HP Ethernet 10Gb 2-port 530T Adapter
HP Ethernet 10Gb 2-port 561T Adapter
HP Ethernet 10Gb 2-port 560SFP+ Adapter
HP Ethernet 10Gb 2-port 546SFP+ Adapter
HPE Ethernet 10Gb 2-port 562SFP+ Adapter
HPE FlexFabric 10Gb 4-port 536FLR-T Adapter
25 Gigabit Ethernet adapters
804616-B21
804628-B21
804634-B21
832417-B21
804578-B21
804584-B21
804590-B21
804596-B21
804602-B21
804608-B21
816933-B21
816999-B21
816989-B21
777894-B21
788028-B21
666986-B21
788355-B21
647594-B21
811546-B21
615732-B21
652497-B21
652503-B21
656596-B21
716591-B21
665249-B21
779793-B21
727055-B21
764302-B21
Page 23
QuickSpecs
HPE ProLiant DL80 Generation9 (Gen9)
Core Options
HPE InfiniBand
HPE Ethernet 4x25Gb 1-port 620QSFP28 Adapter
FlexibleLOM Adapters
HP Ethernet 1Gb 4-port 366FLR Adapter
HP Ethernet 10Gb 2-port 561FLR-T Adapter
HP FlexFabric 10Gb 2-port 534FLR-SFP+ Adapter
HP FlexFabric 10Gb 2-port 533FLR-T Adapter
HP Ethernet 10Gb 2-port 546FLR-SFP+ Adapter
HP Ethernet 10Gb 2-port 560FLR-SFP+ Adapter
HPE Ethernet 10Gb 2-port 562FLR-SFP+ Adapter
817762-B21
HP InfiniBand FDR 2-port 545QSFP Adapter
HP InfiniBand FDR/Ethernet 10Gb/40Gb 2-port 544+QSFP Adapter
702211-B21
764284-B21
HPE I/O Expansion HP DL80 Gen9 FlexibleLOM Riser Kit
Options
NOTE: Includes one FlexibleLOM slot, one Low Profile slot and one fan.
HP DL80 Gen9 Full Height Half Length Riser Kit
NOTE: Includes two FLFH PCIe 3.0 slots and one fan.
HP DL80 Gen9 GPU Enablement Kit
NOTE: Includes 1 FHFL slot, one fan and power cable required to enable GPU
support. Either one of FHHL or FlexibleLOM riser or GPU riser can be selected.
HPE Power
Supplies
HPE Entry-Level Power Supplies
HPE 550W Standard FIO Power Supply Kit
NOTE: This is a Factory Installed Option (FIO) only.
NOTE: Supports Silver-level efficiency (89%) with a standard C14 inlet
connector. No support for HPE Power Discovery Services. Only compatible with
select HPE ProLiant Gen9 Essential servers.
HPE 900W Standard AC 240VDC Power Input Module FIO Kit
NOTE: This is a Factory Installed Option (FIO) only.
NOTE: RPS Backplane is mandatory to be chosen with this power input module.
HPE 900W Standard AC 240VDC RPS Power Backplane FIO Kit
NOTE: This is a Factory Installed Option (FIO) only.
NOTE: This RPS backplane is mandatory to be chosen along with 900W RPS
input module.
HPE 900W Standard AC 240VDC Power Input Module
NOTE: This part number can only be bought standalone and is for field
integration only.
NOTE: RPS Backplane is mandatorily needed with this power input module.
HPE 900W Standard AC 240VDC RPS Power Backplane
NOTE: This part number can only be bought standalone and is for field
integration only.
NOTE: This RPS backplane is mandatorily needed with 900W RPS input
module.
HPE 900W Standard AC 240VDC Redundant Power Supply Kit
NOTE: This Redundant Power supply kit includes 2 power supply input module
and 1 backplane kit.
NOTE: This part number is both factory installed option and field integrable
option.
665240-B21
700699-B21
700751-B21
700759-B21
779799-B21
665243-B21
727054-B21
765514-B21
765515-B21
765518-B21
730941-B21
828734-B21
828735-B21
775595-B21
814835-B21
820792-B21
Page 24
QuickSpecs
HPE ProLiant DL80 Generation9 (Gen9)
Core Options
NOTE: This Power supply supports both 100-240V AC and 240V DC.
NOTE: Supports Gold-level efficiency (92%) with a standard C14 inlet
connector. No support for HPE
Power Discovery Services. Only compatible with select HPE ProLiant Gen9
Essential servers.
NOTE: HPE 900W Gold (Redundant) AC 240VDC Power Input Module
(775595-B21/ 828734-B21) must be used with Power Backplane (814835B21).
NOTE: Each Redundant Power Supply Backplane can support up to two (2)
power input modules.
NOTE: Redundant AC Power Input Modules do not share power. Redundant AC
Power Input Module #1 is the primary AC Power Input Module. Redundant AC
Power Input Module #2 is the backup AC
Power Input Module.
NOTE: Mixing of power supplies in the same server is not supported. All power supplies must be of the
same input voltage, output rating, and efficiency rating. If non-matching power supplies are installed, you
may receive an error message and/or experience operational issues with your server.
NOTE: Prior to selecting a power supply option, it is highly recommended that you review your server
configuration in the HPE Power Advisor tool to determine the right size power supply for your server
configuration. The HPE Power Advisor is located at: http://www.hp.com/go/hppoweradvisor.
HPE Computation HP NVIDIA Quadro K2200 Graphics Accelerator
J0G89A
and Graphics
NOTE: GPU enablement kit (P/N: 765518-B21) is required with this option.
Accelerators
NOTE: 1 GPU supported per Server, attached to the Primary CPU.
NOTE: Only the above listed Graphics cards are HPE standard supported options in this server.
NOTE: The NVIDIA Quadro modules are supported only on 64-bit versions of Linux and Windows
operating systems as well as on Virtual Machine client operating systems. The supported bare metal
operating systems are RHEL6, SLES 11 and Windows Server 2012 R2.
NOTE: Please see the HPE Power Advisor for estimated power consumption of your individual system
configuration prior to installing GPUs. The HPE Power Advisor is located
at: http://www.hp.com/go/hppoweradvisor.
HPE Cooling
Options
HP DL80 Gen9 Redundant Fan Kit
NOTE: Includes two fans and is required to move from non-redundant to
redundant fan configurations. Since each riser includes a fan as well, please refer
to user-guide for exact fan requirements to enable fan redundancy.
765516-B21
Page 25
QuickSpecs
HPE ProLiant DL80 Generation9 (Gen9)
Additional Options
NOTE: Some options may not be integrated at the factory. To ensure only valid configurations are ordered, Hewlett Packard
Enterprise recommends the use of an HPE approved configurator. Contact your local sales representative for additional
information.
HPE Insight
HPE Insight Control
Software
HPE Insight Control including 1yr 24x7 Technical Support and Updates 1-server
C6N27A
LTU
HPE Insight Control including 1yr 24x7 TSU E-LTU
C6N28ABE
HPE Insight Control including 1yr 24x7 Support ProLiant ML/DL/BL-bundle
C6N36A
Single Server FIO LTU
HPE Insight Control including 1yr 24x7 Support ProLiant ML/DL/BL-bundle FIO
C6N36ABE
E-LTU
HPE Insight Management Media Kit
C6N31A
NOTE: Electronic and Flexible-Quantity licenses can be used to purchase multiple licenses with a single
activation key.
NOTE: Customer will receive a license entitlement certificate. The license entitlement certificate must be
redeemed online or via fax in order to obtain the license activation key(s). Includes one year of 24x7 HPE
Software Technical Support and Update Service.
NOTE: Licenses ship without media. The HPE Insight Control Media Kit can be ordered separately, or can
be downloaded at: http://www.hp.com/go/insightupdates.
NOTE: For additional license options please see the QuickSpecs
at: https://www.hpe.com/h20195/v2/gethtml.aspx?docname=c04123391.
Embedded
Management
HPE Converged
Infrastructure
Management
Software
HPE iLO Advanced
HPE iLO Advanced including 1yr 24x7 Technical Support and Updates 1-server
LTU
HPE iLO Advanced including 3yr 24x7 Tech Support and Updates 1-server LTU
HPE iLO Advanced including 1yr 24x7 Technical Support and Updates E-LTU
HPE iLO Advanced including 3yr 24x7 Technical Support and Updates E-LTU
HPE iLO Essentials
HPE iLO Essentials including 3yr 24x7 Tech Support and Updates 1-server LTU
HPE iLO Essentials including 1yr 24x7 Tech Support and Updates 1-server LTU
HPE iLO Essentials including 3yr 24x7 Technical Support and Updates E-LTU
HPE iLO Essentials including 1yr 24x7 Technical Support and Updates E-LTU
HPE iLO Scale-out
HPE iLO Scale-Out 3yr 24x7 Tech Support and Updates Flexible Quantity LTU
HPE iLO Scale-Out including 3yr 24x7 Tech Support and Updates Flex Qty ELTU
HPE iLO Scale-Out including 3yr 24x7 Tech Support and Updates Tracking LTU
HPE iLO Scale-Out 1yr 24x7 Tech Support and Updates Flexible Quantity LTU
HPE iLO Scale-Out including 1yr 24x7 Tech Support and Updates Flex Qty ELTU
HPE iLO Scale-Out including 1yr 24x7 Tech Support and Updates Tracking LTU
HPE OneView
HPE OneView including 3yr 24x7 Support Physical 1-server LTU
HPE OneView including 3yr 24x7 Support Flexible Quantity E-LTU
HPE OneView Physical Media Kit LTU
HPE OneView for ProLiant DL Server including 3yr 24x7 Support FIO Bundle
Physical 1-server LTU
HPE OneView without iLO Advanced
512485-B21
BD505A
E6U59ABE
E6U64ABE
BD774A
BD775A
E6U61ABE
E6U62ABE
BD776A
BD776AAE
BD777A
BD778A
BD778AAE
BD779A
E5Y34A
E5Y35AAE
E5Y37A
E5Y43A
Page 26
QuickSpecs
HPE ProLiant DL80 Generation9 (Gen9)
Additional Options
HPE OneView w/o iLO including 3yr 24x7 Support 1-server LTU
HPE OneView w/o iLO including 3yr 24x7 Support Track 1-server LTU
HPE OneView w/o iLO including 3yr 24x7 Support Flexible Quantity E-LTU
HPE OneView w/o iLO including 3yr 24x7 Support 1-server FIO LTU
HPE Operations Analytics for HPE OneView LTU
HPE Operations Analytics for HPE OneView E-LTU
NOTE: Full licenses of HPE OneView Advanced also provide the right-to-use
HPE Insight Control without additional charge.
NOTE: Server provisioning (via 'HPE Insight Control server provisioning') is
licensed as part of HPE OneView Advanced and provides multi-server OS and
driver provisioning. Media kit #BD883A can be ordered for a physical copy of
this software (USB flash drive).
NOTE: Licenses ship without media. The HPE OneView Media Kit can be
ordered separately, or can be downloaded at: http://www.hp.com/go/oneview.
NOTE: Electronic and Flexible-Quantity licenses can be used to purchase
multiple licenses with a single activation key.
HPE Security
HPE Storage
Controllers
HP Trusted Platform Module 2.0 Kit
HP Trusted Platform Module Option
HP 2U Security Bezel Kit
NOTE: Quick Release Ear FIO kit (P/N: 778109-B21) is required for installing
security bezel.
HP DL80 Gen9 Quick Release Ear FIO Kit
NOTE: Quick Release Ears are mandatory for 12LFF models.
HP DL80 Gen9 Thumbscrew Ear FIO Kit
SAS Controllers
HPE Smart Array Controllers
HP Smart Array P440/4GB FBWC 12Gb 1-port Int SAS Controller
HP Smart Array P440/2GB FBWC 12Gb 1-port Int SAS Controller
NOTE: Includes the HPE Smart Storage Battery.
HP Smart Array P840/4GB FBWC 12Gb 2-ports Int SAS Controller
HP Smart Array P441/4GB FBWC 12Gb 2-ports Ext SAS Controller
HP Smart Array P440/4GB FBWC 12Gb 1-port Int FIO SAS Controller
NOTE: Includes the HPE Smart Storage Battery.
HP Smart Array P840/4GB FBWC 12Gb 2-ports Int FIO SAS Controller
NOTE: Includes the HPE Smart Storage Battery.
HP Smart Array P841/4GB FBWC 12Gb 4-ports Ext SAS Controller
HPE Smart Host Bus Adapters
HP H240 12Gb 2-ports Int Smart Host Bus Adapter
HP H240 12Gb 2-ports Int FIO Smart Host Bus Adapter
HP H241 12Gb 2-ports Ext Smart Host Bus Adapter
HPE Cable Options
HP DL60/80/120 Gen9 4LFF Cable FIO Kit
HP DL80 Gen9 LFF Smart Array P440/P840 SAS Cable Kit
NOTE: One cable kit must be selected with P440 controller.
NOTE: Two of these cable kits must be selected with P840 controller.
HP DL80 Gen9 LFF Smart HBA H240 SAS Cable Kit
NOTE: Two cable Kits must be selected with H240.
P8B24A
P8B25A
P8B26AAE
P8B31A
K8G29A
K8G29AAE
745823-B21
488069-B21
666988-B21
778109-B21
787211-B21
726821-B21
820834-B21
726897-B21
726825-B21
761872-B21
761874-B21
726903-B21
726907-B21
761873-B21
726911-B21
777331-B21
779619-B21
779622-B21
Page 27
QuickSpecs
HPE ProLiant DL80 Generation9 (Gen9)
Additional Options
NOTE: One of the above cables is required to be selected depending on the combination of chassis
and storage controller. Cable option kit descriptions include the right chassis and storage
controllers names.
NOTE: FIO indicates that this option is only available as a factory installable option. Please select
FIO option if you want the option to be factory installed.
NOTE: NHPE server chassis (Mod-x) includes SATA cables required to connect drives to embedded
B140i SATA controller.
Optional Software
HPE SmartCache No Media 24x7 Technical Support 1-server LTU
D7S26A
HPE SmartCache No Media 24x7 Technical Support Flexible LTU
D7S27A
HPE SmartCache No Media 24x7 Technical Support E-LTU
D7S27AAE
NOTE: HPE SmartCache is supported when one of the supported Smart Array
Controllers is installed in the server.
NOTE: HPE SmartCache comes standard (no licensing is required) if the HPE
Smart Array P840 Controller is installed in the server.
Optional Upgrades
HP 96W Smart Storage Battery with 145mm Cable for DL/ML/SL Servers
727258-B21
NOTE: This option is mandatorily required with HPE Smart Array controllers.
One server can accommodate only 1 Smart Storage Battery that would suffice
the requirement of all HPE Smart Array controllers.
HPE Tape Backup NOTE: For the complete range of tape drives, autoloaders, libraries and media
see: http://www.hp.com/go/tape. For hardware and software compatibility of HPE tape backup
products http://www.hpe.com/storage/BURAcompatibility.
NOTE: For Internal drives to be connected to DL servers please make sure that you order rack mount kit as
well.
Tape Drives
HPE StoreEver LTO-7 Ultrium 15000 External Tape Drive
BB874A
HPE StoreEver LTO-6 Ultrium 6650 SAS External Tape Drive
EH964A
HPE StoreEver LTO-6 Ultrium 6250 External Tape Drive
EH970A
HPE StoreEver LTO-5 Ultrium 3000 SAS External Tape Drive
EH958B
HPE StoreEver LTO-5 Ultrium 3280 SAS External Tape Drive
EH900B
HPE StoreEver LTO-4 Ultrium 1760 SAS External Tape Drive
EH920B
HPE StoreEver LTO-3 Ultrium 920 SAS External Tape Drive
EH848B
HPE StoreEver Mini-SAS High Density to 4-lane Mini-SAS External Fanout 2m
K2R09A
Cable
HPE StoreEver Mini-SAS High Density to 4-lane Mini-SAS External Fanout 4m
K2R10A
Cable
Tape Libraries
HPE StoreEver MSL2024 0-drive Tape Library
AK379A
HPE StoreEver MSL4048 0-drive Tape Library
AK381A
HPE Tape Storage Systems
HPE StoreEver 1U SAS Rack Mount Kit
AE459B
HPE StoreEver LTO-4 Ultrium 1760 SAS (1) in a 1U Rack Mount Kit
EH946C
HPE StoreEver LTO-5 Ultrium 3000 SAS Tape Drive in a 1U Rack Mount Kit
EJ014B
HPE StoreEver LTO-6 Ultrium 6250 Tape Drive in a 1U Rack Mount Kit
C0L99A
HPE StoreEver 1/8 G2 LTO-6 Ultrium 6250 Fibre Channel Tape Autoloader
C0H19A
HPE StoreEver MSL6480
HPE StoreEver MSL6480 Scalable Base Module
QU625A
HPE StoreEver MSL6480 Scaleable Expansion Module
QU626A
Page 28
QuickSpecs
HPE ProLiant DL80 Generation9 (Gen9)
Additional Options
HPE Disk Backup
HPE Storage
Options
HPE RDX Removable Disk Backup System
HPE RDX+ 3TB USB 3.0 External Disk Backup System
HP RDX 2TB USB3.0 External Disk Backup System
HP RDX+ 500GB External Backup System
HP RDX+ 1TB External Backup System
HPE RDX 3TB USB 3.0 Internal Disk Backup System
HPE RDX+ External Docking System
HPE D3700 Enclosure
HPE D3600 Enclosure
HPE StoreOnce Backup systems
HPE StoreOnce 3100 8TB System
HPE StoreOnce 3520 12TB System
HPE StoreOnce 3540 24TB System
HPE StoreOnce 5100 48TB System
Emulex Fibre Channel HBAs
HPE 81E 8Gb 1-port PCIe Fibre Channel Host Bus Adapter
HPE 82E 8Gb 2-port PCIe Fibre Channel Host Bus Adapter
HPE StoreFabric SN1100E 16Gb Single Port Fibre Channel Host Bus Adapter
HPE StoreFabric SN1100E 16Gb Dual Port Fibre Channel Host Bus Adapter
QLogic Fibre Channel HBAs
HPE 82Q 8Gb 2-port PCIe Fibre Channel Host Bus Adapter
HPE 81Q 8Gb 1-port PCIe Fibre Channel Host Bus Adapter
HPE StoreFabric SN1000Q 16GB 1-port PCIe Fibre Channel Host Bus Adapter
HPE StoreFabric SN1000Q 16GB 2-port PCIe Fibre Channel Host Bus Adapter
Converged Network Adapter
HPE StoreFabric CN1200E 10Gb Converged Network Adapter
HPE StoreFabric CN1100R Dual Port Converged Network Adapter
HPE StoreFabric CN1200E 10GBASE-T Dual Port Converged Network Adapter
HPE StoreFabric CN1100R 10GBASE-T Dual Port Converged Network Adapter
HPE Disk Storage Disk Enclosures
Systems
HP D6000 Dual I/O Module Disk Enclosure
HP D6000 w/35 4TB 6G SAS 7.2K LFF Dual Port MDL HDD 140TB Bundle
HP D6000 w/70 4TB 6G SAS 7.2K LFF Dual Port MDL HDD 280TB Bundle
HP D6000 w/70 3TB 6G SAS 7.2K LFF Dual port MDL HDD 210TB Bundle
HP D6000 w/70 2TB 6G SAS 7.2K LFF Dual port MDL HDD 140TB Bundle
HP D6000 w/35 2TB 6G SAS 7.2K LFF Dual port MDL HDD 70TB Bundle
HP D6000 w/35 3TB 6G SAS 7.2K LFF Dual port MDL HDD 105TB Bundle
HPE D6000 w/35 8TB 12G SAS 7.2K LFF (3.5in) Dual Port MDL HDD 280TB
Bundle
HPE D6000 w/70 8TB 12G SAS 7.2K LFF (3.5in) Dual Port MDL HDD 560TB
Bundle
HPE Data Center
Racks
HPE Advanced Series Racks
HPE 11648 1075mm Pallet Universal Rack
HPE 11648 1075mm Shock Universal Rack
HPE 11642 1075mm Pallet Universal Rack
P9L72A
E7X53B
B7B66B
B7B69B
P9L71A
C8S07B
QW967A
QW968A
BB913A
BB922A
BB914A
BB915A
AJ762B
AJ763B
C8R38A
C8R39A
AJ764A
AK344A
QW971A
QW972A
E7Y06A
QW990A
N3U51A
N3U52A
QQ695A
E7W30A
E7W31A
QQ700A
QQ698A
QQ697A
QQ699A
M0T58A
M0T59A
H6J87A
H6J88A
H6J65A
Page 29
QuickSpecs
HPE ProLiant DL80 Generation9 (Gen9)
Additional Options
HPE 11642 1075mm Shock Universal Rack
HPE 11642 1200mm Pallet Universal Rack
HPE 11642 1200mm Shock Universal Rack
HPE 11636 1075mm Pallet Universal Rack
HPE 11636 1075mm Shock Universal Rack
HPE 11622 G2 1075mm Pallet Universal Rack
HPE 11622 G2 1075mm Shock Universal Rack
HPE 11614 1075mm Shock Universal Rack
NOTE: Please see the HPE Advanced Series Racks QuickSpecs for information
on additional racks options and rack specifications.
HPE Enterprise Series Racks
HPE 647 1075mm Pallet Intelligent Series Rack
HPE 647 1075mm Shock Intelligent Series Rack
HPE 647 1200mm Pallet Intelligent Series Rack
HPE 647 1200mm Shock Intelligent Series Rack
HPE 642 1075mm Pallet Intelligent Series Rack
HPE 642 1075mm Shock Intelligent Series Rack
HPE 642 1200mm Pallet Intelligent Series Rack
HPE 642 1200mm Shock Intelligent Series Rack
HPE 636 1075mm Pallet Intelligent Series Rack
HPE 636 1075mm Shock Intelligent Series Rack
HPE 842 1075mm Pallet Intelligent Series Rack
HPE 842 1075mm Shock Intelligent Series Rack
NOTE: Please see the HPE Enterprise Series Racks QuickSpecs for information
on additional racks options and rack specifications.
HPE Standard Series Rack
HPE V142 1075mm deep Pallet 100 series Rack
NOTE: Please see the HPE Standard Series Racks QuickSpecs for information
on additional racks options and rack specifications.
HPE Power
HPE Basic Power Distribution Units (PDU)
Distribution Units HPE Basic 1.9kVA/L5-20P 16A/120V Outlets (12) 5-20R/Horizontal NA/JP PDU
(PDUs)
HPE Basic 3.6kVA/60320 C20 Detachable 16A/230V Outlets (12)
C13/Horizontal WW PDU
HPE Basic 2.8kVA/L5-30P 24A/120V Outlets (18) 5-20R/Vertical NA/JP PDU
HPE Basic 4.9kVA/60320 C20 Detachable 16A/230V Outlets (20) C13/Vertical
WW PDU
HPE Basic 4.9kVA/L6-30P 24A/208V Outlets (20) C13/Vertical NA/JP PDU
HPE Basic 7.3kVA/60309 5-wire 32A/230V Outlets (20) C13/Vertical INTL PDU
HPE Basic 3Ph 8.6kVA/L15-30P 24A/208V Outlets (18) C13/Vertical NA/JP
PDU
HPE Basic 4.9kVA/L6-30P 24A/208V Outlets (24) C13 (6) C19/Vertical NA/JP
PDU
HPE Basic 7.3kVA/60309 3-wire 32A/230V Outlets (24) C13 (6) C19/Vertical
INTL PDU
HPE Basic 8.3kVA/CS8265C 40A/208V Outlets (30) C13 (6) C19/Vertical NA
PDU
HPE Basic 11kVA/60309 63A 3-wire 48A/230V Outlets (30) C13 (6)
C19/Vertical INTL PDU
HPE Basic 9.2kVA/50A Terminal Block 40A/230V Outlets (30) C13 (6)
C19/Vertical WW PDU
H6J66A
H6J67A
H6J68A
H6J77A
H6J78A
H6J83A
H6J84A
H6J82A
BW911A
BW912A
BW913A
BW914A
BW903A
BW904A
BW907A
BW908A
BW895A
BW896A
BW917A
BW918A
AF046A
H5M54A
H5M56A
H5M55A
H5M57A
H5M58A
H5M68A
H5M61A
H5M59A
H5M70A
H5M60A
H5M71A
H5M75A
Page 30
QuickSpecs
HPE ProLiant DL80 Generation9 (Gen9)
Additional Options
HPE Basic 3Ph 5.7kVA/ L21-20P 16A/120-208V Outlets (24) C13 (3) 520R/Vertical NA/JP PDU
HPE Basic 3Ph 8.6kVA/L21-30P 24A/120-208V Outlets (24) C13 (3) C19 (3)
5-20R/Vertical NA/JP PDU
HPE Basic 3Ph 8.6kVA/L15-30P 24A/208V Outlets (24) C13 (6) C19/Vertical
NA/JP PDU
HPE Basic 3Ph 11kVA/60309 5-wire 16A/230V Outlets (24) C13 (6)
C19/Vertical INTL PDU
HPE Basic 3Ph 11kVA/60309 16A/240V Outlets (36) C13 (6) C19/Vertical NA
PDU
HPE Basic Modular 2.8kVA/L5-30P 24A/120V Outlets (4) C19/Horizontal NA/JP
PDU
HPE Basic Modular 4.9kVA/L6-30P 24A/208V Outlets (4) C19/Horizontal NA/JP
Core Only PDU
HPE Basic Modular 8.3kVA/CS8265C 40A/208V Outlets (4) C19/Horizontal
NA/JP PDU
HPE Basic Modular 7.3kVA/60309 3-wire 32A/230V Outlets (4) C19/Horizontal
INTL Core Only PDU
HPE Basic Modular 9.2kVA/60309 63A 3-wire 40A/230V Outlets (4)
C19/Horizontal INTL PDU
HPE Basic Modular 3Ph 8.6kVA/L15-30P 24A/208V Outlets (6) C19/Horizontal
NA/JP PDU
HPE Basic Modular 3Ph 11kVA/60309 5-wire 16A/230V Outlets (6)
C19/Horizontal INTL PDU
HPE Basic Modular 3Ph 14.4kVA/CS8365C 40A/208V Outlets (6)
C19/Horizontal NA/JP PDU
HPE Basic Modular 3Ph 17.3kVA/60309 60A 4-wire 48A/208V Outlets (6)
C19/Horizontal NA/JP PDU
HPE Basic Modular 3Ph 22kVA/60309 5-wire 32A/230V Outlets (6)
C19/Horizontal INTL PDU
HPE Basic 3Ph 11kVA/60309 5-wire 16A/230V Outlets (36) C13 (6)
C19/Vertical INTL PDU
HP 800VA - 277V Input / 230V Output NA Rack Mount Transformer
NOTE: Please see the HPE Basic Power Distribution Units (PDU) QuickSpecs
for information on additional options and product specifications.
HPE Metered Power Distribution Units (PDU)
HPE Metered 2.8kVA/L5-30P 24A/120V Outlets (12) 5-20R/Horizontal NA/JP
PDU
HPE Metered 3.6kVA/60320 C20 Detachable 16A/230V Outlets (12)
C13/Horizontal WW PDU
HPE Metered 4.9kVA/L6-30P 24A/208V Outlets (12) C13/Horizontal NA/JP
PDU
HPE Metered 3.6kVA/60320 C20 Detachable 16A/230V Outlets (16)
C13/Vertical WW PDU
HPE Metered 4.9kVA/L6-30P 24A/208V Outlets (12) C13/Vertical NA/JP PDU
HPE Metered 7.3kVA/60309 3-wire 32A/230V Outlets (12) C13/Vertical INTL
PDU
HPE Metered 4.9kVA/L6-30P 24A/208V Outlets (20) C13 (4) C19/Vertical
NA/JP PDU
HPE Metered 7.3kVA/60309 32A 3-wire/230V Outlets (20) C13 (4)
C19/Vertical INTL PDU
H5M63A
H5M64A
H5M62A
H5M72A
H5M67A
252663-D71
252663-D74
252663-D75
252663-B33
252663-B34
AF512A
AF513A
AF519A
AF511A
AF518A
H5M73A
H3X09A
D9N43A
D9N46A
D9N44A
D9N45A
G9Z05A
G9Z06A
D9N47A
D9N48A
Page 31
QuickSpecs
HPE ProLiant DL80 Generation9 (Gen9)
Additional Options
HPE Metered 3Ph 8.6kVA/L15-30P 24A/208V Outlets (18) C13 (3)
C19/Vertical NA/JP PDU
HPE Metered 3Ph 8.6kVA/L21-30P 24A/120-208V Outlets (18) C13 (3) C19
(3) 5-20R/Vertical NA/JP PDU
HPE Metered 3Ph 11kVA/60309 5-wire 16A/230V Outlets (18) C13 (3)
C19/Vertical INTL PDU
HPE Metered 8.3kVA/CS8265C 40A/208V Outlets (30) C13 (3) C19/Vertical NA
PDU
HPE Metered 7.3kVA/60309 32A 3-wire/230V Outlets (32) C13 (4)
C19/Vertical INTL PDU
HPE Metered 3Ph 11kVA/60309 5-wire 16A/230V Outlets (30) C13 (3)
C19/Vertical INTL PDU
HPE Metered 3Ph 14.4kVA/CS8365C 40A/208V Outlets (12) C13 (12)
C19/Vertical NA/JP PDU
HPE Metered 3Ph 16.6kVA/60309 32A-30A 5-wire 24A/230V Outlets (30) C13
(3) C19/Vertical NA/JP PDU
HPE Metered 3Ph 16.6kVA/60309 32A-30A 5-wire 24A/230V Outlets (12) C13
(12) C19/Vertical NA/JP PDU
HPE Metered 3Ph 17.3kVA/60309 60A 4-wire 48A/208V Outlets (24) C13 (3)
C19/Vertical NA/JP PDU
HPE Metered 3Ph 17.3kVA/60309 60A 4-wire 48A/208V Outlets (12) C13 (12)
C19/Vertical NA/JP PDU
HPE Metered 3Ph 17.3kVA/60309 60A 4-wire 48A/208V Outlets (12) C13 (12)
C19/Vertical NA/JP PDU
HPE Metered 3Ph 19.9kVA/L22-30P 24A/277V Outlets (30) RF-203PHP/Vertical NA PDU
HPE Metered 3Ph 22kVA/60309 5-wire 32A/230V Outlets (30) C13 (3)
C19/Vertical INTL PDU
HPE Metered 3Ph 22kVA/60309 5-wire 32A/230V Outlets (12) C13 (12)
C19/Vertical INTL PDU
HPE Metered 3Ph 22kVA/60309 5-wire WT 32A/230V Outlets (12) C13 (12)
C19/Vertical INTL PDU
HP Environmental Sensor for Remote Monitored and Managed PDUs
NOTE: Please see the HPE Metered Power Distribution Units (PDU) QuickSpecs
for information on additional options and product specifications.
HPE Intelligent Power Distribution Unit (PDU)
HPE Intelligent Modular 4.9kVA/L6-30P 24A/208V Outlets (6) C19/Horizontal
NA/JP PDU
HPE Intelligent Modular 8.3kVA/CS8265C 40A/208V Outlets (6) C19/Horizontal
NA/JP PDU
HPE Intelligent Modular 3Ph 8.6kVA/L15-30P 24A/208V Outlets (6)
C19/Horizontal NA/JP PDU
HPE Intelligent Modular 3Ph 17.3kVA/60309 60A 4-wire 48A/208V (6)
C19/Horizontal NA/JP PDU
HPE Intelligent Modular 3Ph 17.3kVA/60309 30A 5-wire 24A/240V (6)
C19/Horizontal NA/JP PDU
HPE Intelligent Modular 7.3kVA/60309 3-wire 32A/230V Outlets (6)
C19/Horizontal INTL PDU
HPE Intelligent Modular 3Ph 11kVA/60309 5-wire 16A/230V Outlets (6)
C19/Horizontal INTL PDU
HPE Intelligent Modular 3Ph 22kVA/60309 5-wire 32A/230V Outlets (6)
C19/Horizontal INTL PDU
D9N51A
D9N53A
D9N55A
D9N49A
D9N50A
D9N57A
D9N58A
D9N61A
D9N62A
D9N54A
D9N59A
G9Z07A
D9N63A
D9N56A
D9N60A
G9Z08A
E2D53A
AF520A
AF521A
AF522A
AF523A
AF901A
AF525A
AF526A
AF527A
Page 32
QuickSpecs
HPE ProLiant DL80 Generation9 (Gen9)
Additional Options
HPE Intelligent Modular 3Ph 17.3kVA/IEC 60309 60A 4-wire 48A/208V (12)
AF535A
C19/Horizontal NA/JP PDU
HPE Intelligent Modular 3Ph 22kVA/60309 5-wire 32A/230V Outlets (12)
AF538A
C19/Horizontal INTL PDU
HPE Intelligent Modular 4.9kVA/L6-30P 24A/208V Outlets (20) C13 (6)
AF531A
C19/Horizontal NA/JP PDU
HPE Intelligent Modular 3Ph 8.6kVA/L15-30P 24A/208V Outlets (20) C13 (6)
AF532A
C19/Horizontal NA/JP PDU
HPE Intelligent Modular 3Ph 14.4kVA/CS8365C 40A/208V Outlets (6)
AF533A
C19/Horizontal NA/JP PDU
HPE Intelligent Modular 7.3kVA/60309 3-wire 32A/230V Outlets (6)
AF534A
C19/Horizontal INTL PDU Kit
HP 5xC13 Intelligent PDU Extension Bar G2 Kit
AF547A
HP 5xC13 Outlets Power and UID LEDs Pair Standard Extension Bar
AF528A
NOTE: Please see the HPE Intelligent Power Distribution Unit (PDU) QuickSpecs
for information on additional options and product specifications.
HPE Metered and Switched Power Distribution Units (PDU)
HPE Metered Switched 2.8kVA/L5-30P 24A/120V Outlets (24) 5-20R /Vertical
H8B48A
NA/JP PDU
HPE Metered Switched 3.6kVA/60320 C20 Detachable 16A/230V Outlets (7)
H8B49A
C13 (1) C19/Vertical WW PDU
HPE Metered Switched 4.9kVA/L6-30P 24A/208V Outlets (20) C13 (4)
H8B50A
C19/Vertical NA/JP PDU
HPE Metered Switched 7.3kVA/60309 3-wire 32A/230V Outlets (20) C13 (4)
H8B51A
C19/Vertical INTL PDU
HPE Metered Switched 3Ph 8.6kVA/L15-30P 24A/208V Outlets (18) C13 (6)
H8B52A
C19/Vertical NA/JP PDU
HPE Metered Switched 3Ph 8.6kVA/L21-30P 24A/208V Outlets (20)C13
H8B53A
(3)C19 (1)5-20R/Vertical NA/JP PDU
HPE Metered Switched 3Ph 11kVA/60309 5-wire 16A/230V Outlets (21) C13
H8B54A
(3) C19/Vertical INTL PDU
HPE Metered Switched 3Ph 14.4kVA/CS8365C 40A/208V Outlets (12) C13 (12)
H8B55A
C19/Vertical NA/JP PDU
HPE Metered Switched 3Ph 17.3kVA/60309 4-wire 48A/208V Outlets (12) C13
H8B56A
(12) C19/Vertical NA/JP PDU
NOTE: Please see the HPE Metered and Switched Power Distribution Units (PDU) QuickSpecs
for information on additional options and product specifications.
NOTE: To learn more, please visit the HPE Uninterruptible Power Systems (UPS) web page.
HPE Rack Mount
Consoles, KVM
Switches, and
Keyboards
HPE Location Discovery Services
HP Location Discovery Services LCD8500 Kit
NOTE: Please see the HPE Location Discovery Services QuickSpecs for
Technical Specifications and additional information.
HPE Rack Mount Consoles
HP LCD8500 1U US Rackmount Console Kit
HP LCD8500 1U UK Rackmount Console Kit
HP LCD8500 1U DE Rackmount Console Kit
HP LCD8500 1U FR Rackmount Console Kit
HP LCD8500 1U JP Rackmount Console Kit
HP LCD8500 1U RU Rackmount Console Kit
HP LCD8500 1U INTL Rackmount Console Kit
TL052A
AF630A
AF631A
AF632A
AF633A
AF642A
AF643A
AF644A
Page 33
QuickSpecs
HPE ProLiant DL80 Generation9 (Gen9)
Additional Options
HP LCD8500 1U US TAA Rackmount Console Kit
HPE KVM Switches
HP 0x1x8 G3 KVM Console Switch
HP 0x2x16 G3 KVM Console Switch
HP TAA 0x2x16 G3 KVM Console Switch
HP USB Remote Access Key for G3 KVM Console Switches
HP KVM Console USB Interface Adapter
HP 0x2x16 KVM Server Console Switch G2 with Virtual Media CAC Software
HP 0x2x32 KVM Server Console Switch G2 with Virtual Media CAC Software
HP KVM Console USB 2.0 Virtual Media CAC Interface Adapter
HPE KVM Console USB/Display Port Interface Adapter
HPE KVM Console USB 8-pack Interface Adapter
HP 1x4 USB/PS2 KVM Console Switch
HP 1x1Ex8 KVM IP Console Switch G2 with Virtual Media CAC Software
HP 2x1Ex16 KVM IP Console Switch G2 with Virtual Media CAC Software
HP 4x1Ex32 KVM IP Console Switch G2 with Virtual Media CAC Software
NOTE: To learn more, please visit the HPE KVM Switches web page.
HPE USB Keyboard and Mouse
HP USB BFR with PVC Free US Keyboard/Mouse Kit
HP USB BFR with PVC Free UK Keyboard/Mouse Kit
HP USB BFR with PVC Free FR Keyboard/Mouse Kit
HP USB BFR with PVC Free ES Keyboard/Mouse Kit
HP USB BFR with PVC Free DE Keyboard/Mouse Kit
HP USB BFR with PVC Free JP Keyboard/Mouse Kit
HP USB BFR with PVC Free IT Keyboard/Mouse Kit
HP USB BFR with PVC Free CN Keyboard/Mouse Kit
HP USB BFR with PVC Free AE Keyboard/Mouse Kit
HP USB BFR with PVC Free RU Keyboard/Mouse Kit
HP USB BFR with PVC Free IN Keyboard/Mouse Kit
HP USB BFR with PVC Free AP-Intl Keyboard/Mouse Kit
HP USB BFR with PVC Free Intl Keyboard/Mouse Kit
HP USB BFR with PVC Free PT Keyboard/Mouse Kit
HP USB BFR with PVC Free TR Keyboard/Mouse Kit
HP USB BFR with PVC Free CZ Keyboard/Mouse Kit
HP USB BFR with PVC Free FI Keyboard/Mouse Kit
HP USB BFR with PVC Free SE Keyboard/Mouse Kit
HP USB BFR with PVC Free CH Keyboard/Mouse Kit
HP USB BFR with PVC Free KR Keyboard/Mouse Kit
NOTE: Please see the HPE USB Keyboard and Mouse QuickSpecs for
information on additional options and product specifications.
Rail Kits
HP 2U Small Form Factor Easy Install Rail Kit
HP 2U Cable Management Arm for Easy Install Rail Kit
HPE Other Options
HP Rack LED Light Kit
HP Kit LCD 1.83m Latch Display Port Cable
HP Advanced Power Manager Kit
AF645A
AF651A
AF652A
AF653A
AF650A
AF628A
AF618A
AF619A
AF629A
AF654A
AF655A
AF611A
AF620A
AF621A
AF622A
631341-B21
631344-B21
631346-B21
631348-B21
631358-B21
631360-B21
631362-B21
631364-B21
638212-B21
638214-B21
672097-D63
672097-373
672097-B33
672097-133
672097-143
672097-223
672097-353
672097-103
672097-113
672097-KD3
733660-B21
733664-B21
BW939A
G7T29A
741192-B21
Page 34
QuickSpecs
HPE ProLiant DL80 Generation9 (Gen9)
Additional Options
HPE Uninterruptible HPE DirectFlow Three Phase UPS
Power Systems
Power Unit (1U UPS)
(UPS)
HPE R12000 DirectFlow - 1U Rackmount Uninterruptible Power System
G9Y75A
HPE R12000 DirectFlow - POD 1U Rackmount Uninterruptible Power System
AF478A
HPE RP12000/3 12000VA Three Phase INTL 6U Rackmount Uninterruptible
AF437A
Power System
Input/Output Module Options for 1U UPS
HPE 32A 400-415 Volt Three Phase INTL R12000 DirectFlow UPS IEC309
AF488A
Input/Output Module
HPE 30A 400-415 Volt Three Phase NA R10000 DirectFlow UPS IEC309
AF489A
Input/Output Module
HPE 32A 380 Volt Three Phase China R12000 DirectFlow UPS Unterminated
AF490A
Input/Output Module
HPE 30A 480 Volt Three Phase NA R12000 DirectFlow UPS L22-30
AF491A
Input/Output Module
HPE 30A 480 Volt Three Phase NA R12000 DirectFlow UPS IEC309
AF492A
Input/Output Module
HPE 30A 400-415 Volt Three Phase NA R12000 DirectFlow UPS IEC309
G9Y76A
Input/Output Module
Power Unit (2U UPS)
HPE R18000 DirectFlow - 2U Rackmount Uninterruptible Power System
AF479A
Input/Output Module Options for 2U UPS
HPE 32A 400-415 Volt Three Phase INTL R18000 DirectFlow UPS IEC309
AF483A
Input/Output Module
HPE 30A 380 Volt Three Phase China R18000 DirectFlow UPS Unterminated
AF485A
Input/Output Module
HPE 30A 480 Volt Three Phase NA R18000 DirectFlow UPS IEC309
AF486A
Input/Output Module
HPE 30A 480 Volt Three Phase NA R18000 DirectFlow UPS IEC309
AF487A
Input/Output Module
HPE 30A 400 Volt Three Phase NA R18000 DirectFlow UPS IEC309
D9Q02A
Input/Output Module
HPE 30A 400-415V Three Phase NA R18000 DirectFlow UPS 1:1 IEC309
AF484A
Input/Output Module
NOTE: All Input/Output Modules support dual output outlets except the AF484A.
Battery Pack Options
HPE DirectFlow UPS - 1U Rackmount Lithium-ion Battery Pack
AF480A
HPE DirectFlow UPS - 3U Rackmount VRLA Battery Pack
AF482A
HPE WW DirectFlow Secondary Battery Cable
AF497A
NOTE: Please see the HPE DirectFlow Three Phase Uninterruptible Power System QuickSpecs
for information on additional options and product specifications.
HPE Tower UPS
HPE T750 G4 UPS Models
HPE T750 G4 NA/JP Uninterruptible Power System
J2P85A
HPE T750 G4 INTL Uninterruptible Power System
J2P88A
HPE T1000 G4 UPS Models
HPE T1000 G4 NA/JP Uninterruptible Power System
J2P86A
HPE T1000 G4 INTL Uninterruptible Power System
J2P89A
HPE T1500 G4 UPS Models
HPE T1500 G4 NA/JP Uninterruptible Power System
J2P87A
HPE T1500 G4 INTL Uninterruptible Power System
J2P90A
Page 35
QuickSpecs
HPE ProLiant DL80 Generation9 (Gen9)
Additional Options
HPE Rack/Tower UPS
HPE R/T2200 G4 UPS Models
HPE R/T2200 G4 NA/JP Uninterruptible Power System
J2R00A
HPE R/T3000 G4 UPS Models
HPE R/T3000 G4 Low Voltage NA/JP Uninterruptible Power System
J2R01A
HPE R/T3000 G4 High Voltage NA/JP Uninterruptible Power System
J2R02A
HPE R/T3000 G4 High Voltage INTL Uninterruptible Power System
J2R04A
R1500 G4 Models
HPE R1500 G4 NA Uninterruptible Power System
J2Q99A
HPE R1500 G4 JP/TWN Uninterruptible Power System
J2R05A
HPE R1500 G4 INTL Uninterruptible Power System
J2R03A
R7000 Uninterruptible Power System (UPS)
HPE R7000 4U 50A High Voltage NA/JP Uninterruptible Power System
AF462A
HPE R7000 4U IEC-32A High Voltage INTL Uninterruptible Power System
AF463A
R5000 Uninterruptible Power System (UPS)
HPE R5000 3U L630 High Voltage NA/JP Uninterruptible Power System
AF460A
HPE R5000 3U IEC309-32A High Voltage INTL Uninterruptible Power System
AF461A
NOTE: Please see the HPE Line Interactive Single Phase UPS QuickSpecs
for information on additional options and product specifications.
HPE UPS Options
HPE R/T2200 G4 Extended Runtime Module
J2R09A
HPE R/T3000 G4 Extended Runtime Module
J2R10A
HPE 2U Rack/Tower UPS Shipping Kit
L4Q11A
HPE DirectFlow UPS Management Card
AF493A
NOTE: To learn more, please visit the HPE Uninterruptible Power Systems (UPS) web page.
HPE USB and SD
Options
HPE Enterprise Mainstream Flash Media Kits for Memory Cards
HP 32GB microSD Enterprise Mainstream Flash Media Kit
HP 8GB microSD Enterprise Mainstream Flash Media Kit
HP 8GB USB Enterprise Mainstream Flash Media Drive Key Kit
HP Dual 8GB microSD Enterprise Midline USB Kit
HPE Support
Services
Installation & Start-up Services
HPE Installation ML/DL Series 10 Service
HPE Startup ML/DL Series 10 Service
Foundation Care
HPE 3 year Foundation Care Next business day DL80 Gen9 Service
HPE 3 year Foundation Care Next business day with DMR DL80 Gen9 Service
HPE 3 year Foundation Care Next business day with CDMR DL80 Gen9 Service
HPE 3 year Foundation Care 24x7 DL80 Gen9 Service
HPE 3 year Foundation Care 24x7 wDMR DL80 Gen9 Service
HPE 3 year Foundation Care 24x7 wCDMR DL80 Gen9 Service
Proactive Care
HPE 3 year Proactive Care 24x7 DL80 Gen9 Service
HPE 3 year Proactive Care 24x7 with DMR DL80 Gen9 Service
HPE 3 year Proactive Care 24x7 with CDMR DL80 Gen9 Service
700139-B21
726116-B21
737953-B21
741279-B21
U7WZ5E
U7WZ7E
U7WG1E
U7WG2E
U7WG3E
U7WG4E
U7WG5E
U7WG6E
U7WK1E
U7WK2E
U7WK3E
Page 36
QuickSpecs
HPE ProLiant DL80 Generation9 (Gen9)
Memory
Memory
Population
guidelines
General Memory Population Rules and Guidelines:
. Install DIMMs only if the corresponding processor is installed.
. If only one processor is installed in a two processor system, only half of the DIMM slots are available.
. To maximize performance, it is recommended to balance the total memory capacity between all
installed processors and load the channels similarly whenever possible.
. When two processors are installed, balance the DIMMs across the two processors.
. White DIMM slots denote the first slot to be populated in a channel.
. Do not mix RDIMMs or LRDIMMs.
. Quad rank RDIMMs are not supported in HPE ProLiant DL80 Gen9 servers.
. DIMMs of different speeds may be mixed in any order; the server will select a common optimal speed.
. The maximum memory speed is a function of the memory type, memory configuration, and processor
model.
. The maximum memory capacity is a function of the memory type and number of installed processors.
. To realize the performance memory capabilities listed in this document, HPE SmartMemory is required.
Intel Gen9 Supported Memory Bandwidth for HPE ProLiant Gen9 Intel® Xeon® E5-2600v4 Series Processor Family
Memory Bandwidth and Capacity
[DIMM Type]
Registered DIMMs (RDIMMs)
HPE SKU P/N
DIMM Rank
805347-B21
Single Rank
805349-B21
Single Rank
836220-B21
Dual Rank
805351-B21
Dual Rank
Load Reduced
(LRDIMMs)
805353-B21
Dual Rank
DIMM Capacity
8GB
16GB
16GB
32GB
32GB
Page 37
QuickSpecs
HPE ProLiant DL80 Generation9 (Gen9)
Memory
Std Voltage 1.2V Std Voltage 1.2V Std Voltage 1.2V Std Voltage 1.2V Std Voltage 1.2V
Voltage
1G
1G
2G
2G
2G
DRAM Depth [bit]
x8
x4
x4
x4
x4
DRAM Width [bit]
8Gb
8Gb
4Gb
8Gb
8Gb
DRAM Density
17-17-17
17-17-17
17-17-17
17-17-17
17-17-17
CAS Latency
2400
2400
2400
2400
2400
DIMM Native Speed (MT/s)
SLOTS THAT CAN BE POPULATED
8 slot servers
8
8
8
8
8
MAXIMUM CAPACITY (GB)
64
128
128
256
256
2400
2400
2400
2400
2400
2 DIMM Per Channel
n/a
n/a
n/a
n/a
n/a
3 DIMM Per Channel
n/a
n/a
n/a
n/a
n/a
POPULATED DIMM SPEED (MT/s)
1 DIMM Per Channel
NOTE: DL80 has 1 DIMM per channel and hence 2 DIMMs and 3 DIMMs per channel memory speeds are not applicable on DL80.
Intel Gen9 Supported Memory Bandwidth for HPE ProLiant Gen9 Intel® Xeon® E5-2600v3 Series Processor Family
Memory Bandwidth and Capacity
[DIMM Type]
HPE SKU P/N
DIMM Rank
Registered DIMMs (RDIMMs)
Load Reduced (LRDIMMs)
726717-B21 726718-B21 759934-B21 726719-B21 728629-B21 726720-B21 726722-B21
Single Rank Single Rank Dual Rank Dual Rank Dual Rank Dual Rank Quad Rank
DIMM Capacity
Voltage
4GB
8GB
Std Voltage Std Voltage
1.2V
1.2V
512M
1G
x8
x4
4Gb
4Gb
15-15-15
15-15-15
2133
2133
DRAM Depth [bit]
DRAM Width [bit]
DRAM Density
CAS Latency
DIMM Native Speed
(MT/s)
SLOTS THAT CAN BE POPULATED
8 slot servers
8
8GB
16GB
32GB
16GB
32GB
Std Voltage Std Voltage Std Voltage Std Voltage Std Voltage
1.2V
1.2V
1.2V
1.2V
1.2V
512M
1G
1G
2G
2G
x8
x4
x4
x4
x4
4Gb
4Gb
4Gb
8Gb
8Gb
15-15-15
15-15-15
15-15-15
15-15-15
15-15-15
2133
2133
2133
2133
2133
8
8
8
8
8
8
64
64
128
256
128
256
2133
2133
2133
2133
2133
2133
MAXIMUM CAPACITY (GB)
32
POPULATED DIMM SPEED (MT/s)
2133
1 DIMM Per Channel
Page 38
QuickSpecs
HPE ProLiant DL80 Generation9 (Gen9)
Memory
2 DIMM Per Channel
n/a
n/a
n/a
n/a
n/a
n/a
n/a
3 DIMM Per Channel
n/a
n/a
n/a
n/a
n/a
n/a
n/a
NOTE: DL80 has 1 DIMM per channel and hence 2 DIMMs and 3 DIMMs per channel memory speeds are not applicable on DL80.
DIMM slot and
configuration
diagram
DIMM slot and configuration diagrams
Basic memory slot & population diagram
• Population order; start with "A" first, "B" second, "C" third, etc.
• When one processor is installed, install DIMMs in sequential alphabetic order: A, B, C, D, E, F.
• When two processors are installed, install DIMMs in sequential alphabetic order: CPU1-A, CPU2A,CPU1-B,CPU2-B,CPU1-C, CP2-C
CPU #1 IS PROCESSOR ON LEFT - LOOKING FROM FRONT OF SERVER
Chnl 1
Chnl 2
Chnl 4
Chnl 3
CPU 1
Slot # population order
Slot # population order
1
1
A1
CPU 2
A1
CPU 1
Slot # population order
Slot # population order
2
2
B2
CPU 2
B2
CPU 1
Slot # population order
Slot # population order
3
3
D3
CPU 2
D3
CPU 1
Slot # population order
Slot # population order
4
4
C4
CPU 2
C4
Memory Speed by Processor Models
Supported Memory Speeds
Processor Model E5-2603v3, E5-2609v3
1600MT/s
E5-2620v3, E5-2630v3, E5-2630Lv3, E5-2640v3, 1866MT/s
E5-2623v3
E5-2650v3, E5-2660v3, E5-2650Lv3
2133MT/s
E5-2609v4, E5-2603v4
1866MT/s
E5-2630Lv4, E5-2620v4, E5-2623v4, E5-2640v4, 2133MT/s
E5-2630v4
E5-2650Lv4, E5-2660v4, E5-2650v4
2400MT/s
Standard and
Pre Configured Models Standard Memory
Maximum Memory
Capacity (Preconfigured Models) E5-2609v4, E5-2609v3, 8GB (1x8GB)
E5-2603v4
E5-2603v3
4GB (1x4GB)
Maximum Memory Plus Standard Memory
Optional Memory
Replaced with Optional
Memory
232GB (7x32GB, 1x8GB) 256GB (8x32GB)
228GB (7x32GB, 1x4GB) 256GB (8x32GB)
Page 39
QuickSpecs
HPE ProLiant DL80 Generation9 (Gen9)
Memory
DDR4 memory options part number decoder
NOTE: Capacity references are rounded to the common gigabyte (GB) values.
•
•
•
•
•
•
2GB = 2,048MB
4GB = 4,096MB
8GB = 8,192MB
16GB = 16,384MB
32GB = 32,768MB
64GB = 65,536MB
Page 40
QuickSpecs
HPE ProLiant DL80 Generation9 (Gen9)
Storage
4-bay LFF non-hot-plug drive model
1-4
4 x LFF SATA Non-Hot Pluggable Hard Drive
Bays
8-bay LFF non-hot plug drive model
1-8
8 x LFF SATA Non- Hot Pluggable Hard Drive
Bays
8-bay LFF hot-plug drive model
1-8
8 x LFF SATA/SAS/SDD Hot Pluggable Hard
Drive Bays
12-bay LFF hot-plug drive model
1-12
12 x LFF SATA/SAS/SDD Hot Pluggable Hard
drive bays
Page 41
QuickSpecs
HPE ProLiant DL80 Generation9 (Gen9)
Technical Specifications
System Unit
Dimensions
(with bezel)
Weight
(approximate)
Input
Requirements
3.45 x 18.98 x 24.97 in (8.75 x 44.55 x 60.7 cm)
Maximum:
Minimum:
Rated Line
Voltage
Rated Input
Current
Rated Input
Frequency
Rated Input
Power
BTU Rating
Power
Specifications
Power Supply
Output
System Inlet
Temperature
47/6 lb (21.59 kg)
36.58 lb (16.59 kg)
100 to 240 VAC
For 550W Power Supply:
6.7 A (at 100 VAC)
3.3 A (at 200 VAC)
47 to 63 Hz
For 550 W Power Supply:
< 670 W (at 100 VAC),
< 660 W (at 200 VAC),
Maximum
For 550 W Power Supply:
2201 BTU/hr (at 100 VAC),
2153 BTU/hr (at 200 VAC)
To review typical system power ratings use the Power Advisor which is available via
the online tool located at URL: http:/www.hp.com/go/proliant-energy-efficient
or http://www.hp.com/go/hppoweradvisor - Click on the system of interest.
Example: DL80 Gen9- Follow the instructions of the next screens.
Rated SteadyFor 550 W Power Supply:
State Power
550 W (at 100 VAC),
550 W (at 200 VAC),
Maximum Peak
For 550 W Power Supply:
Power
550 W (at 100 VAC),
550 W (at 200 VAC),
Standard
10° to 35°C (50° to 95°F) at sea level with an altitude derating
Operating Support of 1.0°C per every 305 m (1.8°F per every 1000 ft) above sea
level to a maximum of 3050 m (10,000 ft), no direct sustained
sunlight. Maximum rate of change is 20°C/hr (36°F/hr). The
upper limit and rate of change may be limited by the type and
number of options installed. System performance during
standard operating support may be reduced if operating with a
fan fault or above 30°C (86°F).
Extended Ambient For approved hardware configurations, the supported system
Operating Support inlet range is extended to be: 5° to 10°C (41° to 50°F) and
35° to 40°C (95° to 104°F) at sea level with an altitude
derating of 1.0°C per every 175 m (1.8°F per every 574 ft)
above 900 m (2953 ft) to a maximum of 3050 m (10,000 ft).
The approved hardware configurations for this system are
listed at the URL:
http://www.hp.com/servers/ashrae
System performance may be reduced if operating in the
extended ambient operating range or with a fan fault.
Non-operating
NOTE: Supports A3 extended ambient.
-30° to 60°C (-22° to 140°F). Maximum rate of change is
20°C/hr (36°F/hr).
Page 42
QuickSpecs
HPE ProLiant DL80 Generation9 (Gen9)
Technical Specifications
Relative
Humidity
Minimum to be the higher (more moisture) of -12°C (10.4°F)
dew point or 8% relative humidity. Maximum to be the lower
(less moisture) of 24°C (75.2°F) dew point or 90% relative
humidity.
(non-condensing) Non-operating
5% to 95% relative humidity (Rh), 38.7°C (101.7°F) maximum
wet bulb temperature, non-condensing.
Operating
3048 m (10,000 ft). This value may be limited by the type and
Altitude
number of options installed. Maximum allowable altitude change
rate is 457 m/min (1500 ft/min).
Non-operating
9144 m (30,000 ft). Maximum allowable altitude change rate is
457 m/min (1500 ft/min).
Acoustic Noise Listed are the declared A-Weighted sound power levels (LWAd) and declared
average bystander position A-Weighted sound pressure levels (LpAm) when the
product is operating in a 23°C ambient environment. Noise emissions were
measured in accordance with ISO 7779 (ECMA 74) and declared in accordance
with ISO 9296 (ECMA 109).
Idle
L WAd
Entry: 4.8 B
Base: 4.7 B
L pAm
Entry: 34 dBA
Base: 33 dBA
Operating
L WAd
Entry: 4.9 B
Base: 4.9 B
L pAm
Entry: 34 dBA
Base: 36 dBA
NOTE: The listed sound levels apply to standard shipping configurations.
Additional options may result in increased sound levels.
FCC Rating
Class A
Emissions
Classification
Normative
CISPR 22; EN55022; EN55024; FCC CFR 47, Pt 15; ICES-003;
(EMC)
Standards
CNS14336-1; CNS13438; GB4943; GB9254; EN 61000-3-2;
EN 61000-3-3; EN 60950-1; IEC 60950-1
NOTE: Product conformance to cited product specifications is based on sample
(type) testing, evaluation, or assessment. This product or family of products is
eligible to bear the appropriate compliance logos and statements.
NOTE: The listed sound levels apply to standard shipping configurations.
Additional options may result in increased sound levels.
HPE Dynamic
Number of PCI
Smart Array
links
B140i Controller PCI link rate
Storage protocol
support
SAS/SATA peak
data transfer
rate
Number of
SAS/SATA links
SAS/SATA
connectivity
Operating
Four
4 Gb/s
SATA
6 Gb/s
10 links
2x4 connectors; 2x1 connectors
Page 43
QuickSpecs
HPE ProLiant DL80 Generation9 (Gen9)
Technical Specifications
No
Expander
support
Drives supported Up to 10 Internal Drives
(max)
0, 1, 10, 5 SATA
RAID support
HPE SSA, SMH, SIM
Software
management
Server warranty
Warranty
Not Supported
HPE Secure
Encryption
license
HPE SmartCache Not Supported
License
Supported
HPE Smart
Storage
Administrator
HPE Embedded
Dual Port 361i
Adapter
Network
Interface
Compatibility
Data Transfer
Method
Controller
Network
Transfer Rate
Connector
Cable Support
Environmentfriendly Products
and Approach
End-of-life
Management and
Recycling
10Base-T/100Base-TX/1000Base-TX
IEEE 802.3 10Base-T
IEEE 802.3ab 1000Base-T
IEEE 802.3u 100Base-TX
IEEE 1588, IEEE 802.1AS
IEEE 802.3az - Energy Efficient Ethernet (EEE)
PCI Express v 2.0, 5.0 GT/s, two lanes (x2)
Intel I350 Powerville
10Base-T (HalfDuplex)
10 Mb/s per port, 40 Mb/s combined
10Base-T (FullDuplex)
20 Mb/s per port, 80 Mb/s combined
100Base-TX (HalfDuplex)
100 Mb/s per port, 400 Mb/s combined
100Base-TX (FullDuplex)
200 Mb/s per port, 800 Mb/s combined
1000Base-TX
(Half and FullDuplex)
1000 Mb/s per port, 4000 Mb/s combined
Two RJ-45
10 Base-T
Categories 3, 4 or 5 UTP; up to 328 ft (100 m)
10/100/1000 Base-TX Category 5 or higher UTP; up to 328 ft (100 m)
Hewlett-Packard offers end-of-life Hewlett Packard Enterprise product return,
trade-in, and recycling programs in many geographic areas. For trade-in
information, please go to: http://www.hp.com/go/green. To recycle your product,
please go to: http://www.hp.com/go/green or contact your nearest Hewlett
Packard Enterprise sales office. Products returned to Hewlett Packard Enterprise
will be recycled, recovered or disposed of in a responsible manner.
Page 44
QuickSpecs
HPE ProLiant DL80 Generation9 (Gen9)
Technical Specifications
The EU WEEE directive (2002/95/EC) requires manufacturers to provide
treatment information for each product type for use by treatment facilities. This
information (product disassembly instructions) is posted on the Hewlett Packard
Enterprise web site at: http://www.hp.com/go/green. These instructions may be
used by recyclers and other WEEE treatment facilities as well as HPE OEM
customers who integrate and re-sell Hewlett Packard Enterprise equipment.
Page 45
QuickSpecs
HPE ProLiant DL80 Generation9 (Gen9)
Summary of Changes
Date
28-Oct-2016
Version History
From Version 16 to 17
Action
Removed
26-Sep-2016
From Version 15 to 16
Added
17-Jun-2016
From Version 14 to 15
Changed
Removed
Added
6-Jun-2016
From Version 13 to 14
Added
Changed
8-Apr-2016
31-Mar-2016
From Version 12 to 13
From Version 11 to 12
Changed
Added
Changed
16-Feb-2016
17-Dec-2015
1-Dec-2015
From Version 10 to 11
From Version 9 to 10
From Version 8 to 9
Removed
Added
Changed
Removed
Added
Added
Changed
28-Sep-2015
17-Aug-2015
10-Jun-2015
From Version 7 to 8
Removed
Added
From Version 6 to 7
Removed
Added
From Version 5 to 6
Changed
Removed
Added
Description of Change
Obsolete Hard Drives were removed from the
QuickSpecs.
Added new 10TB SATA Hot Plug LFF drives
offering and new 900W AC/ 240VDC power
supply.
HPE Power Supplies section was revised.
Obsolete SKUs were removed from the QuickSpecs.
Power supply information was added to the
Configuration Information - Factory Integrated
Models section.
Added new HDD offering to the HPE Drives
section.
New options added to the HPE Disk Backup and
HPE Storage Options.
HPE Processors section was revised.
Added new HPE Smart Memory 2400 MHz
memory, Intel Xeon E5-2600v4 processor support,
new HPE Trusted Platform Module (TPM) 2.0, new
900W AC/ 240VDC power supply, new SATA Hot
Plug Standard drives.
Power Supply, Upgradeability, Embedded
Management, Service and Support, Pre-configured
Models, HPE Security, and Memory sections were
revised.
Obsolete SKUs were removed from the QuickSpecs.
New HDD offering was added to HPE Drives.
HPE Power Supplies, HPE Computation and
Graphics Accelerators, HPE Data Center Racks, and
HPE Power Distribution Units (PDUs) were revised.
Obsolete SKUs were removed from the QuickSpecs.
Smart Buy models were added to the NA version.
New options added to HPE Disk Backup, HPE Disk
Storage Systems, and HPE Power Distribution Units
(PDUs).
On System Management Chipset, Maximum
Internal Storage, Embedded Management, and
Server utilities were revised.
Product images were updated.
Obsolete SKUs were removed from QuickSpecs.
Added new 6Gb SATA Solid State Drives.
Added new HPE OneView management software.
Obsolete SKUs were removed from the QuickSpecs.
New Solid State Drives offering was added to Core
Options.
Maximum Internal Storage was revised.
Obsolete SKUs were removed from QuickSpecs.
Added new HPE Drives:
HPE 8TB 12G SAS 7.2K rpm LFF (3.5-inch) SC
512e Helium 1yr Warranty Hard Drive
Page 46
QuickSpecs
HPE ProLiant DL80 Generation9 (Gen9)
Summary of Changes
HPE 6TB 12G SAS 7.2K rpm LFF (3.5-inch) SC
512e Helium 1yr Warranty Hard Drive
HPE 8TB 6G SATA 7.2K rpm LFF (3.5-inch) SC
512e Helium 1yr Warranty Hard Drive
1-Jun-2015
From Version 4 to 5
Added
HPE 6TB 6G SATA 7.2K rpm LFF (3.5-inch) SC
512e Helium 1yr Warranty Hard Drive
New Hard Drives were added to Core Options.
Added new HPE Power Supplies options.
Added new HPE OneView LTUs to HPE Converged
Infrastructure Management Software.
24-Apr-2015
From Version 3 to 4
Changed
Removed
Added
30-Mar-2015
From Version 2 to 3
Added
Changed
9-Feb-2015
From Version 1 to 2
Added
Changed
New RDX+ backup external backup options added
to HPE Disk Backup.
Core Options and Additional Options were revised.
Obsolete SKUs were removed from QuickSpecs.
Added 813534-B21 and 813535-B21 to HPE
Power Supplies.
New Hard Drives offering.
Optional Software added to HPE Storage
Controllers.
HPE Memory, HPE Disk Storage Systems, HPE USB
and SD Options, HPE Storage Controllers, and HPE
Disk Storage Systems were updated.
Added HP Insight Software.
Added new G4 UPS models.
HPE Memory, HPE Tape Backup, HPE Disk Backup,
HPE Rack Mount Consoles, KVM Switches, and
Keyboards, and HPE Uninterruptible Power
Systems (UPS) sections were revised.
Page 47
QuickSpecs
HPE ProLiant DL80 Generation9 (Gen9)
Summary of Changes
Sign up for updates
© Copyright 2016 Hewlett Packard Enterprise Development LP. The information contained herein is subject
to change without notice. The only warranties for Hewlett Packard Enterprise products and services are set
forth in the express warranty statements accompanying such products and services. Nothing herein should
be construed as constituting an additional warranty. Hewlett Packard Enterprise shall not be liable for
technical or editorial errors or omissions contained herein.
Intel® and Xeon® are registered trademarks of Intel Corporation in the U.S. and other countries.
Microsoft®, Windows®, and Windows Server® are U.S. registered trademarks of the Microsoft group of
companies.
For hard drives, 1GB = 1 billion bytes. Actual formatted capacity is less
c04447832 - 15089 - Worldwide - V17 - 28-October-2016
Page 48
Download PDF
Similar pages