UNIVERSAL
CONNECTIVITY
PLATFORM
A Modular Approach to
Infrastructure Design
TE Connectivity’s Universal Connectivity Platform (UCP) provides a fully
modular approach to designing data centers and telecommunications
rooms. This patch panel is ideal for rapidly evolving environments because
it supports both TE’s plug-and-play copper and fiber solutions.
TE’s UCP enables business transformation by virtue of its modularity. It
is designed to accommodate all of TE’s cabling media, whether copper
or fiber, to support the 10, 40 and 100 Gigabit network connections in a
single patch panel. By simply selecting the media, network equipment
can be changed in a controlled fashion as the network demands.
Rack space is always a premium in the data center or telecommunications
room, especially in existing infrastructure. The UCP is designed with
this in mind, incorporating maximum flexibility for different needs and
architecture. The panels can be installed in a 19 inch cabinet/rack, or
installed overhead or under raised floors. By moving the panels overhead
or under the floor, they can be easily shared between cabinets/racks.
Data Centers and co-location sites have undergone radical changes over the past
few years and will again in the future. TE’s Universal Connectivity Platform helps
network managers address this change by delivering added flexibility and scalability.
FEATURES
• Multi-media Quick-Fit configurations accommodate both copper and fiber
• Compatible with MPOptimate multimode (OM3/
OM4) and singlemode (OS1/OS2) fiber media
• Compatible with U/UTP, F/UTP and S/FTP copper media
• Can be installed inside a cabinet/rack, to a wire basket or under a raised floor
• Scalable to meet all applications from 100 Mbps to
100 Gbps including high-density 10 Gbps deployments
BROADBAND NETWORK SOLUTIONS /// UNIVERSAL CONNECTIVITY PLATFORM
Universal Connectivity Platform
Patch Panels
Universal Connectivity Platform
Patch Panels
UCP Patch Panel
UCP
Patch Panel
FEATURES
• 19” unloaded modular patch panel with 4 Quick-Fit cutouts
FEATURES
Description
• 19” unloaded modular patch panel with 4 Quick-Fit cutouts
Part Number
UCP Patch Panel 1RU Flush;
Description
includes grounding bolt and rear cable support bar
1-1671594-2
Part Number
UCP
UCP Patch
Patch Panel
Panel 1RU
1RU Flush;
Flush; without cable support bar
includes grounding bolt and rear cable support bar
UCP Patch Panel 2RU Flush; without cable support bar
UCP Patch Panel 1RU Flush; without cable support bar
UCP Patch Panel 1RU Recessed Angled; without cable support bar
UCP Patch Panel 2RU Flush; without cable support bar
UCP Patch Panel 2U Recessed Angled; without cable support bar
UCP Patch Panel 1RU Recessed Angled; without cable support bar
UCP Patch Panel 2U Recessed Angled; without cable support bar
2111761-1
1-1671594-2
2111762-1
2111761-1
1671590-5
2111762-1
1671590-6
1671590-5
1671590-6
UCP Drawer Style Enclosure
UCP
Drawer Style Enclosure
FEATURES
• 19” 1RU enclosure with 4 Quick-Fit cutouts
FEATURES
• Mounting bracket for flush or recessed mounting
• 19” 1RU enclosure with 4 Quick-Fit cutouts
Description
• Mounting bracket for flush or recessed mounting
Part Number
1RU Drawer style Enclosure
Description
1933443-1
Part Number
1RU Drawer style Enclosure
1933443-1
Zero RU Quick-Fit Bracket
Zero
RU Quick-Fit Bracket
FEATURES
• Bracket designed for copper and fiber Quick-Fit cassettes and modules
FEATURES
• 5” horizontal clearance required
• Bracket designed for copper and fiber Quick-Fit cassettes and modules
Description
• 5” horizontal clearance required
Part Number
Zero RU Quick-Fit Bracket; includes grounding bolt
Description
1-1671548-1
Part Number
Zero RU Quick-Fit Bracket; includes grounding bolt
1-1671548-1
BROADBAND NETWORK SOLUTIONS /// UNIVERSAL CONNECTIVITY PLATFORM
BROADBAND NETWORK SOLUTIONS /// UNIVERSAL CONNECTIVITY PLATFORM
PAGE 2
Universal Connectivity Platform
Copper Cassettes and Modules
MRJ21 Quick-Fit Cassettes
Compatible with MRJ21 cable assemblies for superior performance.
FEATURES
• Factory terminated and tested
10 GbE
• Available in 1GbE and 10GbE
• High-density
– 48 ports 1RU 1000 BASE-T
– 32 Ports 1RU 10 GBASE-T
• Integrated bonding
Description
Part Number
MRJ21 XG Quick-Fit cassette for 10GBase-T
2153115-1
MRJ21 Quick-Fit cassette for 1000BaseT
1711970-1
1 GbE
STP and UTP Quick-Fit Modules
FEATURES
• Accommodates Cat 5e, 6, 6A SL jacks
• STP version has integrated bonding
Quick-Fit Module
• Labels included
Description
Part Number
STP Quick-Fit module
2111093-1
UTP Quick-Fit module
2111117-1
Blank Module; used to close unused cut-outs in panels
1479698-1
Blank Module
PAGE 3
Universal Connectivity Platform
Fiber Optic Cassettes
MPOptimate to LC 10 Gigabit Quick-Fit Cassettes
12-Fiber Trunking Solutions
FEATURES
• Factory terminated and tested
• Front: 6 x LC Duplex or 6 x LC Quad
LC Duplex
Back: one or two 12 fiber MPO or MPOptimate connector(s)
• Available in OS2, OM3 or OM4 MPOptimate
• Port number labeling and additional label strip included
• Part numbers noted are Straight Polarity. Other polarities are available upon request
Description
LC duplex
LC quad
Fiber Type
Fiber Count
Part Number
50 µm, MM, OM3
12
1671205-3
9 µm, SM, OS2
12
1671205-4
50 µm, MM, OM4 MPOptimate
12
1671226-5
50 µm, MM, OM3
24
1671206-3
9 µm, SM, OS2
24
1671206-4
50 µm, MM, OM4 MPOptimate
24
1671227-5
MPOptimate to LC 10 Gigabit Quick-Fit Cassettes
24-Fiber Trunking Solutions
FEATURES
• Factory terminated and tested
• Front: 12 x LC Duplex
Back: 1 x 24 fiber MPO connector
LC Quad
• Available in OM4 MPOptimate
• Port number labeling and additional label strip included
Description
Cassette OM3 Straight A-A/B-B
Cassette OM3 Polarity Flipped A-B/B-A
Cassette OM4 Straight A-A/B-B
Cassette OM4 Polarity Flipped A-B/B-A
BROADBAND NETWORK SOLUTIONS /// UNIVERSAL CONNECTIVITY PLATFORM
Part Number
2160266-3
1-2160266-3
2160266-5
1-2160266-5
PAGE 4
Universal Connectivity Platform
Fiber Optic Cassettes and Modules
MPOptimate 40 Gigabit Quick-Fit Cassettes
FEATURES
• Factory terminated and tested
• Front: 6 x 8-fiber MPO connectors
Back: 2 x 24 fiber MPO connector
• MPOptimate
6x 40G Cassette
• Port number labeling and additional label strip included
• Fiber path for part numbers noted is Polarity “A” or Polarity “B”
Description
Part Number
Cassette OM4 Straight A-A/B-B
2160530-5
Cassette OM4 Polarity Flipped A-B/B-A
1-2160530-5
MPO/MPOptimate Quick-Fit Module
FEATURES
• Quick-Fit modules with 6 or 12 MPO couplers
• Compatible with 10/40/100 Gbps MPO trunks and arrays
• Port number labeling and additional label strip included
6x MPO Coupler Module
• MPO coupler joins MPO pinned to non-pinned connectors
Part Number
Description
6x MPO coupler module; black
1671200-1
12x MPO coupler module
1711987-1
Quick-Fit Fiber Modules
FEATURES
• Available in LC and SC configurations
12 Fiber LC
• Available in singlemode and multimode
Description
Fiber Type
Ferrule
Color
Part Number
12 Fiber LC
OM3/OM4
Ceramic
aqua
0-1671196-3
12 Fiber LC
SM
Ceramic
blue
0-1671196-1
24 Fiber LC
OM3/OM4
Ceramic
aqua
0-1671202-3
24 Fiber LC
SM
Ceramic
blue
0-1671202-1
12 Fiber SC
OM3/OM4
Ceramic
aqua
1671201-3
12 Fiber SC
SM
Ceramic
blue
1671201-1
24 Fiber LC
PAGE 5
Universal Connectivity Platform
Mounting Accessories
Vertical Panel Mounting Brackets
FEATURES
• Fully flexible system for installing 19” panels vertically outside of the 19” area
• Available in 1RU
Description
Part Number
1RU Vertical Panel Mounting Brackets
1-1671549-1
Subfloor Panel Holder Kit
FEATURES
• Fully flexible system for installing 19” panels underneath
cabinets/racks in raised floor environments
• Pedestal distance maximum 24”
• The clamping range varies from 0.6” up to 1.2”
• Pedestal can be round or square
• Available in 2RU
Description
Subfloor Panel Holder Kit 2RU
Part Number
1671189-2
Aerial Panel Holder Kit for Wire Mesh Cable Trays
FEATURES
• Fully flexible system for installing 19” panels above cabinets/racks
attached to wire mesh cable trays
• Available in 2RU
Description
Part Number
Aerial Panel Holder Kit (2RU)
1-1671603-1
Note: For information on Copper and Fiber cable assemblies visit www.te.com/EnterpriseNetworks to view the below documents.
Copper trunk assemblies and patch cords, see document number 313948AE.
Fiber trunk assemblies and patch cords, see document numbers 402-1007 and 402-1008.
for more information or to order,
contact your p&t representative today
800-238-7514
marketing@ptsupply.com
BROADBAND NETWORK SOLUTIONS /// UNIVERSAL CONNECTIVITY PLATFORM
PAGE 6
Download PDF
Similar pages