PRE1346
Coordinate Measuring Machines
NEW PRODUCT INFORMATION
UMAP-CMM
The micro measuring head for highly
accurate, detailed 3-D coordinate
measurement.
F
eatures
† Extremely large length: diameter ratio
† Very low contact forces
† Can be used in all directions on a PH10M
PRE1346_NPI_UMAP_CMM.indd 1
31.08.11 15:10
UMAP: Ultrasonic Micro and Accurate Probe
a) Normal amplitude
b) Vibration damped
t
a) Without workpiece
contact
b) With workpiece contact
The UMAP measuring head offers the following advantages compared with image processing measuring
systems for the following examples of measuring tasks:
Chamfered bore
Radius
Upset edge
a) Normala)amplitude
Normal amplitude
a) Normal amplitude
a) Normal amplitude a) Normal amplitude a) Normal amplitude
b) Vibration
b) Vibration
damped damped
b) Vibration damped
b) Vibration damped b) Vibration damped b) Vibration damped
t
t
t
Tilt mechanism
t
CCD camera
t
t
Coordinate Measuring Machines
Vision Measuring Systems
Probe unit
White LED lighting
Objective lens
Probe
Version 1:
Standard
Incl. observation system with on-board camera system with
LED lighting (factory option)
UMAP 110
UMAP 130
Diameter
100 μm
300 µm
Shaft diameter
80 µm
200 µm
Effective length
10 mm
16 mm
Contact force
Ambient temperature
1 - 50 µm/s
Humidity
1 µN
Form Measurement
Optical Measuring
Sensor Systems
Version 2:
Measuring speed
© MITUTOYO/D 0911 PRE1346
Auto joint
connection
Tapered component
10 µN
20°C +/-1°; gradient < 1K/8h
55% +/-5%; gradient < 2%/8h
Test Equipment and
Seismometers
Digital Scale and DRO Systems
Small Tool Instruments and
Data Management
Mitutoyo Europe GmbH
Borsigstr. 8-10
41469 Neuss
T +49 (0)2137-102-0
F +49 (0)2137-102-351
info@mitutoyo.eu
www.mitutoyo.eu
Note: All information about our products in this printed material, particularly the illustrations, drawings, measurement and performance specifications,
as well as other technical specifications are to be interpreted as approximate average values. In this respect, changes in construction, technical
specification, measures and weights remain reserved. Our specified standards, similar technical regulations as well as the technical specifications,
descriptions and illustrations of products are accurate on the date of printing. Furthermore, our general terms of business in the currently applicable
revision are binding. Only the offers we make are definitive.
PRE1346_NPI_UMAP_CMM.indd 2
31.08.11 15:10
Download PDF
Similar pages