SEE THROUGH SMOKE
FROM EVERY ANGLE
FLIR Handheld, Mounted, and Aerial
Thermal Imaging Cameras for Firefighting
IMAGE MODES
TI BASIC
FLIR THERMAL IMAGING CAMERAS
FOR FIREFIGHTING
FULL FORCE COVERAGE FROM THE GROUND UP
FLIR’s expanded lineup of TICs gives you the most
comprehensive view of the scene – from inside,
outside, and above the fire.
Visibility is a chief concern for maintaining firefighter safety, whether you’re in
the thick of fighting a fire or coordinating resources as the incident commander.
Thanks to FLIR’s lineup of cost-effective handhelds, feature-rich advanced
cameras, and mounted and UAS aerial options, fire departments can now afford
to outfit more firefighters with TICs and monitor all angles of the scene.
For initial fire attack and life
rescuing operations.
WITHOUT FSX ™
This is about more than seeing through a smoke-filled room: by viewing the
entire scene from multiple viewpoints, incident commanders can make better
decisions when directing resources. And, since FLIR TICs clearly visualize heat
sources, they’re an important tool for hazmat and search and rescue operations.
WITH A FLIR TIC, YOU GET :
A Clear View Inside
Rugged, Reliable Tools
All of that plastic in our homes and buildings
generates billows of black smoke as it burns, making
it too easy for firefighters to lose their way, or each
other. FLIR’s handheld TICs help clear the way and
can even enhance the view with ultra-sharp detail for
easier orientation.
Fire scenes aren’t pretty, they aren’t safe, and they
aren’t easy on equipment. FLIR designed its line of
TICs to withstand the toughest firefighting conditions,
whether it’s a two-meter drop, heavy water spray, or
blazing-hot temperatures.
BLACK & WHITE FIREFIGHTING
FIRE
SEARCH & RESCUE
H E AT D E T E C T I O N
Same as the TI Basic mode but a
grey scale image.
For use in context with higher
background temperatures where
a lot of open flames are present,
particularly in structural fires.
For use with lower temperature
situations, such as initial rescue
efforts after traffic accidents,
searches in wooded areas, etc.
Used for finding hotspots. The
hottest 20% of the scene is
colored red.
WITH FSX ™
FSX™ - FLEXIBLE SCENE ENHANCEMENT*
Digital image processing enhances the thermal image in the camera,
producing an ultra-sharp view with more scene detail. FSX makes it
easier for firefighters to find their way in smoke-filled rooms, even in
scenes with extreme temperature dynamics.
*KF6 and all K-Series models except K2
An Early Warning
A New Vantage Point
Whether there’s a surge of high heat or the potential
for hazardous materials, it helps to know what you’re
dealing with. Truck- and ladder-mounted cameras
allow you to detect fire intensity from a safe distance,
spot temperature differences that point to hazardous
agents, and even check liquid levels in tanker trucks.
The view of the fire on the ground is only half of the
story. A FLIR TIC mounted on a small drone provides
a view of rooftops, upper stories, and tall structures.
Drone-mounted cameras are also vital to search and
rescue efforts.
FLIR K-SERIES
AFFORDABLE, DEPENDABLE, ESSENTIAL
Just like your air pack, radio, and
protective gear, a FLIR thermal imaging
camera (TIC) is an essential tool for
firefighting. With a TIC in hand, you
can attack fires more strategically,
maneuver through smoke more easily,
and save lives. And with a range of
technologies and prices, from the
introductory K2 model through the
NFPA-compliant FLIR K65, it’s easier
than ever for departments to afford to
issue a TIC to every firefighter.
K2
K33/53
FLIR K-SERIES FEATURES
Enhanced for Crisper Detail
Uncompromisingly Tough
Affordably Priced
FLIR K-Series TICs display enhanced
thermal images on a bright LCD, helping
you navigate better and expedite critical
decisions. Whether you’re working with
an advanced 320 x 240 pixel model
or an affordable 240 x 180 pixel TIC,
the uncooled IR sensor provides crisp,
detail-rich imagery at a 60 Hz frame rate
that keeps up with the action.
FLIR designed its K-Series TICs to
withstand the toughest firefighting
conditions – from two-meter drops
onto concrete to blasts from the hose.
They remain fully operational in 260ºC
(500°F) heat for up to 5 minutes.
What’s more, the K65 complies fully
with the NFPA® 1801-2013 standard for
firefighting thermal imaging cameras.
FLIR develops and manufactures more
thermal imaging cameras than any other
company. This integrated capability
allows us to offer the K-Series at an
extremely affordable price to help you
stretch your department’s budget.
K45/55
K65
NFPA® Compliant
ZOOM
MODE SELECT
POWER BUTTON
Ready for Recaps and Reports
Easy to Handle
Full Protection for Your TIC:
Save up to 200 thermal images (K45)
or record up to 200 5-minute thermal
video clips (K53, K55, K65) to replay on
the camera LCD (K55, K65) or export
for future reference. These options are
ideal for on-site review and for creating
recap reports once the fire is out.
The large buttons on K-Series TICs
provide quick access to the simplified
user interface, so you can stay focused
on the challenging and fast-changing job
at hand.
FLIR’S 2-5-10 Warranty
•2 Years Battery
•5 Years Full Product/Parts and Labor
•10 Years Detector
B AT T E R Y
WA R R A N T Y *
5
FULL PRODUCT
WA R R A N T Y *
DETECTOR
WA R R A N T Y *
FLIR K-SERIES
AFFORDABLE, DEPENDABLE, ESSENTIAL
FLIR K2
FLIR K65
Put A TIC in Every
Firefighter’s Hand
NFPA® Compliant
The K2 offers extreme
affordability without
sacrificing quality,
capability, or reliability.
This TIC is light and easy
to attach to turnouts, but
it’s engineered just as tough
as its K-Series big brothers.
Plus, the K2 uses FLIR’s
patented MSX® technology to
emboss key visual details
onto thermal images,
helping you stay oriented to
your surroundings while
saving others.
The K65 is the advanced, feature-rich thermal imaging
camera you need when NFPA compliance is a must.
With fully sealed connectors and a secured battery,
the K65 is designed to be fully compliant with the
NFPA 1801-2013 Standard for
Thermal Imagers covering
usability, image quality,
and durability for
firefighting.
Certified according
to NFPA 1801-2013
specifications for:
• Vibration
• Impact acceleration resistance
• Corrosion
• Viewing surface abrasion
• Heat resistance
• Heat and flame
• Product label durability
FLIR TOOLS
OPTIONAL ACCESSORIES
FLIR Tools is software that comes with every
FLIR K-Series thermal imaging camera.
• Extra battery
• Battery charger
• Hard case
• Retractable
lanyard
• Strap lanyard
• Neck strap
• USB cable
• Tripod adapter
• In-truck charger
Key features:
• Update software of K- Series TICs
• Change Camera settings
• Upload customized start up image
• Import and organize images and videos
• Connect K-Series TIC to live stream
• Write and export reports
National Fire Protection Association and
NFPA are registered trademarks of the
National Fire Protection Association. The
NFPA does not test, certify or approve
any products.
FLIR K-Series Handheld TICs Specifications
Model
K2
Imaging and optical data
IR resolution
160 x 120 pixels
Thermal sensitivity
< 100 mK @ 30°C (86°F)
Image or contrast
Digital image enhancement with
optimization
MSX®
Field of view (FOV)
47° × 35°
Image storage
No
K33
K45
K53
240 x 180 pixels
< 40 mK @ 30°C (86°F)
K55
K65
320 × 240 pixels
< 30 mK @ 30°C (86°F)
Digital image enhancement with FSX ™
No
51° × 38°
Up to 200 JPEG images on internal flash memory
(co-dependent on the number of saved video clips)
200 files in total, with a maximum duration of 5 min per video clip
Video storage
No
No
In-camera video
No
No
MPEG-4 to internal flash memory
recording format
Image presentation
Display
Backlit 3 in, 320 x 240 pixel LCD
Backlit 4 in, 320 x 240 pixel LCD
Image modes
IR Image:
IR Image:
IR Image:
IR Image:
IR Image:
IR Image:
Basic firefighting mode,
TI Basic
TI Basic firefighting
TI Basic
TI Basic firefighting
TI Basic NFPA
firefighting mode
mode, Black-andfirefighting mode mode, Black-and-white
firefighting mode,
Cold detection mode, Building
white firefighting
firefighting mode, Fire
Black-and-white
analysis mode,
mode, Fire mode,
mode, Search and
firefighting mode,
Black-and-white firefighting mode,
Search and rescue
rescue mode, Heat
Fire mode, Search
Fire mode, Search and rescue
mode, Heat detection
detection mode
and rescue mode,
mode, Heat detection mode
mode
Heat detection mode
Thumbnail gallery
Thumbnail gallery
Thumbnail gallery
Auto range
Yes, selectable on/off using FLIR Tools
Measurement
Object
High-gain range:
High-gain range:
temperature range
–20°C to 150°C (–4°F to 302°F)
–20°C to 150°C (-4°F to 302°F)
Low-gain range:
Low-gain range:
0°C to 650°C (32°F to 1,202°F)
0°C to 500°C (32°F to 932°F)
Accuracy
±4°C (±7.2°F)or ±4% of reading for ambient temperature, 10°C to 35°C (50°F to 95°F)
Spotmeter
1 spotmeter
Certifications
NFPA® 1801-2013
Yes
Certification
Power system
Battery type
Li Ion, > 4 hours operating time
Charging time
2.5 h to 90% capacity
2 hours to 85% capacity, status indicated by LEDs
Environmental data
Operating
–10°C to 55°C
temperature range
(14°F to 131°F)
–20°C to 85°C (–4°F to 185°F)
85°C (185°F): 15 min
150°C (302°F): 15 min
150°C (302°F): 10 min
260°C (500°F): 5 min
260°C (500°F): 3 min
Storage
–40°C to 70°C
–40°C to 85°C (-40°F to 185°F)
temperature range
(–40°F to 158°F)
Humidity (operating
IEC 60068-2-30/24 h 95% relative humidity 25°C to 40°C (77°F to 104°F) / 2 cycles
and storage/
95% relative humidity 25°C to 40°C (77°F to 104°F) non-condensing
relative)
Encapsulation,
shock, vibration,
and drop
Physical data
Camera weight,
incl. battery
Camera size
(L × W × H)
Packaging
Packaging,
contents
IP 67 (IEC 60529), 25 g (IEC 60068-2-27), 2 g (IEC 60068-2-6), 2.0 m / 6.6 ft, on concrete floor (IEC 60068-2-31)
0.7 kg (1.54 lb)
1.1 kg (2.4 lb)
250 x 105 x 90 mm
(9.8 x 4.1 x 3.5 in)
120 × 125 × 280 mm (4.7 x 4.9 x 11 in)
Infrared camera, Battery (×2),
Battery charger,
Lanyard strap,
Power supply,
USB cable,
Quick reference guide
Infrared camera, Battery (×2), Battery charger, Hard transport case, Lanyard
strap, Neck strap, Retractable lanyard, Power supply, USB cable,
Quick reference guide
Software
FLIR Tools
Change Camera settings, write Reports, download pictures or videos, connect to live stream,
upload personalized start up image, restore TIC, update TIC software
Infrared camera, Battery
(x2), Battery charger,
Hard transport case,
Power supply,
USB cable, Torx
screwdriver (T20),
Quick reference guide
FLIR KF6
GET A STRATEGIC VIEW OF THE SCENE
FLIR’s specially designed KF6 cameras can feed thermal video from aerial baskets
or ladders, for a strategic angle of rooftops, upper stories, and tall structures.
KF6
FLIR KF6 FEATURES
High Resolution for Critical Detail
Simple to View and Control
Tough in Any Conditions
The KF6’s high resolution 640 x 480
thermal imagery allows firefighters
to evaluate fires from a safe distance,
check liquid levels in tanker trucks,
scan crash scenes for skid marks, and
spot victims ejected from vehicles.
The KF6 also offers FSX® digital
enhancement for easy identification of
buildings and locations.
View thermal video and control your
TIC from inside the truck, at ground
level, or atop the aerial platform. The
KF6 connects with just one cable
to your in-truck LCD or to a monitor
positioned outside – or connects over
WiFi to wireless-enabled systems.
FLIR knew these cameras would
be front-and-center at all times, so it
designed the KF6 TICs to withstand
the high heat, harsh conditions,
and powerful water sprays at fire
scenes. The KF6’s rugged housing
meet military environmental stress
standards, and passed extensive
IEC performance and water ingress
testing.
EASY TO INSTALL
First responders don’t have time to fiddle with electronics. The KF6
camera is easy to mount and connect to existing systems.
The KF6 mounts quickly and
easily with four bolts.
Attach the KF6:
•Atop platforms
•Under platforms
•To ladders
•On vehicle roofs
KF6 Certifications:
Full Protection for Your KF6:
•MIL-STD-810G
•IP67
•IEC 600 68-2-27
•IEC 600 68-2-6
•5 Years Full Product/Parts
and Labor
•10 Years Detector
B AT T E R Y
WA R R A N T Y *
5
FULL PRODUCT
WA R R A N T Y *
DETECTOR
WA R R A N T Y *
FLIR KF6 Specifications
Model
KF6
Imaging and optical data
IR resolution
640 x 480 pixels
Thermal sensitivity
< 100 mK @ f/1.4
Contrast optimization
Field of view (FOV)
Digital image enhancement with FSX ™
69° × 56°
Image presentation
Image mode
Auto range
TI Basic firefighting mode
Yes
Measurement
Object temperature range
Accuracy
Spotmeter
High-gain range: –25°C to 150°C (–13°F to 302°F)
Low-gain range: 0°C to 550°C (32°F to 1022°F)
±10°C (±18°F) or ±10% in high gain range
1
Video
Video out
Composite video output, NTSC compatible
Power system
Power input
Start-up time
Power consumption
10.5 – 32 VDC (ISO 7637-2)
< 25 sec.
< 5 W average when supplied with 28 VDC
Environmental data
Operating temperature range
-32°C to 65°C (-26°F to 149°F)
Storage temperature range
-40°C to 70°C (-40°F to 158°F)
Humidity (operating and storage)
Encapsulation, shock, vibration
IEC 600 68-2-30, 24 hours, 95% relative humidity, 25°C–40°C (77°F–104°F) , two cycles
IP 67 (IEC 605 29)
IEC 600 68-2-27, 25 g peak half sine wave
IEC 600 68-2-6, 0.15 mm 10 Hz to 58 Hz and 2 g 58 to 500 Hz sinusoidal
Physical data and packaging
Camera weight
Camera size (L x W x H)
Packaging, contents
1.2 kg (2.6 lb)
158 mm × 112 mm × 89 mm (6.2 in × 4.4 in × 3.5 in)
Infrared camera, printed documentation
FLIR AERIAL THERMAL IMAGING KITS
QUICK TO MOUNT, EASY TO FLY
FLIR’s Aerial Thermal Imaging kits combine the easy-to-fly Inspire 1 drone from DJI with the Zenmuse XT thermal imaging
camera. These drone-mounted cameras have the resolution and optics you need to gain a better understanding of a fire
scene, assess a hazardous spill, or aid in a search and rescue operation. By combining the flight stability and powerful video
transmission system of a DJI drone with FLIR thermal technology, these kits provide the ultimate solution for reliable, rapiddeployable aerial thermal imaging.
FLIR AERIAL THERMAL IMAGING KITS FEATURES
Clear, Comprehensive View
Mission-Ready
Vital for Day or Night
FLIR’s Aerial Thermal Imaging Kits offer
cameras with optimized resolution and
wide-angle optics, ensuring you’ll have
the right combination of situational
awareness, magnification, and area
coverage needed to monitor any scene.
This kit provides everything needed
to mount the camera and be ready
to launch in minutes. This DJI drone
comes with the powerful Lightbridge
system for video transmission, camera
control, and digital recording.
FLIR’s Zenmuse XT thermal camera
has the ability to see through smoke,
so incident commanders can keep track
of personnel at large scenes or monitor
roof conditions while firefighters are
inside. Because it visualizes heat, this
thermal imager is also a must-have for
search and rescue operations at any
time of day.
DJI ZENMUSE XT INSPIRE 1
Fast and efficient, with stable airframes, the Inspire 1 will keep
the Zenmuse XT aloft for 22 min*, making it ideal for large scale
inspections and surveys of active fire scenes. It can also be a
critical tool for search and rescue scenarios.
* Flight times vary based on flight conditions, with a maximum
22-minute flight time being recorded when hovering with a TB48
battery using the Zenmuse XT gimbal camera.
FLIR Aerial First Responder Kits
Model
Camera and aircraft data
Thermal camera
Optics
IR resolution
Aircraft
Controllers
Batteries included
Color video camera
Display, Connectivity & Control
FLIR Tools+ image analysis software
Apple iPad Mini 4 (64GB, WiFi)
Monitor hood(s)
Rugged carrying case
FLIR landing pad
Basic Kit
Advanced Kit
DJI Zenmuse XT thermal camera & stabilized gimbal
6.8 mm (45° x 35°)
13 mm (45° x 37°)
336 x 256 pixels
640 x 512 pixels
DJI Inspire 1 (V 2.0)
1
2
3
3
DJI Zenmuse X3 4k video camera & stabilized gimbal
Yes
1
1
2
2
Yes
Yes
Full Protection for Your
Aerial Thermal Imaging Kit:
•DJI Inspire Airframe Gimbal Camera: 1 year
•Battery: 6 months and <200 charge cycles
•Whole Unit*: 1 year and <200 flight hrs.
•Battery Charging Hub: 6 months
•Remote Control: 1 year
•Zenmuse Gimbals: 1 year
•Gimbal Motors: 6 months
*Except for gimbal camera and battery
To speak to a t h e r ma l i ma g i n g ca me ra exp e r t ,
please co nta ct u s.
EUROPE
FLIR Commercial Systems
Luxemburgstraat 2
2321 Meer
Belgium
PH: +32 (0) 3665 5100
HONG KONG
FLIR Systems Co. Ltd.
Room 1613 – 16, Tower 2,
Grand Central Plaza,
No. 138 Shatin Rural Committee
Road, Shatin, New Territories,
Hong Kong
PH : +852 2792 8955
U SA
Corporate Headquarters
FLIR Systems, Inc.
27700 SW Parkway Ave.
Wilsonville, OR 97070
USA
PH: +1 866.477.3687
BRAZIL
FLIR Systems Brasil
Av. Antonio Bardella, 320
Sorocaba, SP 18052-852
Brasil
PH: +55 15 3238 7080
www.flir.com/fire
www.flir.com
NASDAQ: FLIR
Names and marks appearing herein are either registered trademarks or trademarks of FLIR Systems and/or its subsidiaries. All
other trademarks, trade names, or company names referenced herein are used for identification only and are the properties of their
respective owners. Specifications are subject to change without notice. Visit www.flir.com for the latest specifications. Camera
models and accessories subject to regional market considerations. License procedures may apply. Products described herein may
be subject to US Export regulations. Please refer to exportquestions@flir.com for more information. ©2017 FLIR Systems, Inc. All
rights reserved. 17-1555-EMEA [Created 200617]
Download PDF
Similar pages