SuperAP® 550g V2 Rugged AP/Bridge

SuperAP® 550g V2
Rugged AP/Bridge
High Power Wi-Fi with Tamper and Weather Resistant Case
ValuePoint Networks 802.11b/g compliant SuperAP 550g is designed for
distributed Wi-Fi deployment in hotels, apartment buildings, outdoor, or
industrial applications. It is an extremely powerful Rugged Access Point,
with up to 500 mWatt transmit output and industry standard Power over
Ethernet. Ideal for indoor or outdoor applications where industrial hardened
equipment is required, we use a NEMA style enclosure, lockable to the wall or
ceiling, UL2043 rated for use in plenums, and vibration certified for high
vibration environments like vehicular mounting. The SuperAP 550g can act as
an Access Point, Bridge repeater, AP Client, or combination Access Point and
Bridge repeater. Pricing for the 550g is more cost effective than ever before,
dramatically lowering your infrastructure costs, and increasing your Return on
Investment.
Hardware Features
The SuperAP 550g comes with an industry standard N-bulkhead connector so
you can use a wide assortment of the best antennas available.
Your
backbone Ethernet cable connects to the AP through a moisture-proof gland
and the entire unit is sealed with a heavy-duty gasket. Thus the unit is
entirely sealed from the harshest elements and is suitable for indoor or
outdoor applications. In addition, the 550g has a special vibration certification
for high vibration environments.
The 550g supports Power over Ethernet.
It uses external replaceable
antennas as well as Transmit Power control, enabling it to be used in a wide
variety of special applications where the wireless output needs to be controlled
for the environment. Special high-gain, omni-directional, directional, or Yagi
antennas can be attached to the unit using standard N-type cabling.
User Authentication
Secure authentication based on industry standards
The 550g incorporates 802.1x/Radius–based authentication features that
interoperate with a back-office Radius server to provide authentication of each
2002-2011 VP Networks, Inc. All Rights Reserved
www.valuepointnet.com
user. 802.1x-based authentication means a 550g is compatible with a wide
variety of shared usage and public access applications.
In addition, the AP can authenticate users based on their MAC address if
desired.
Security and Management
Highly secure and manageable
In addition to Radius-based and MAC-based authentication in the Advanced
Version, the 550g supports the 64-bit and 128-bit Wireless Encryption
Protocol, WPA/WPA2, and disabling of SSIDs.
The 550g is easy for administrators to setup through Web-based management,
or our Windows-based network manager. Additionally, management can be
done via SNMP V 1, V 2, 802.1x and 802.1d MIBs. It is UPnP-enabled and
supports remote firmware upgrades.
The 550g keeps tracks of all clients connected and their signal strengths. For
preventative maintenance, the 550g can be set to re-boot automatically at
regular off peak intervals.
Extended Network Range
Repeater functionality
The 550g is able to operate as a repeater in addition to an access point,
allowing it to communicate with other compatible AP/routers to form a
Wireless Distribution System. This greatly extends the reach of the wireless
network. Using directional antenna and the unit’s powerful 500 mW radio, a
range of up to 15 miles is possible. Aligning directional antennas is easy using
built-in antenna alignment assistance. Up to six WDS links can be established
from a single unit.
AP client mode
Operators can extend the network even further by configuring the SuperAP
550g as a client device, compatible with any 802.11b/g compliant Access
Point. AP client mode includes RSSI for link and antenna position monitoring
as well as built-in site survey capability.
Compatibility
Wi-Fi
2002-2011 VP Networks, Inc. All Rights Reserved
www.valuepointnet.com
The 550g is fully compatible with the Wi-Fi standard, ensures the usability with
any Wi-Fi compatible wireless equipped device. Wi-Fi is the fastest growing
standard for Internet access and is supported on a vast number of PCs today.
About ValuePoint Networks
ValuePoint Networks is the foremost manufacturer of price leading Gateway
Controllers, Rugged Access Points, and outdoor Mesh gear.
ValuePoint products are used in Hospitality, MTU/MDU, industrial, WISP,
outdoor, hotspot, municipal, and enterprise applications.
Using ValuePoint gear, you can light up more for less, reduce your capital
expenditures, and improve your Return on Investment.
www.valuepointnet.com
Technical Specifications
•
•
•
•
•
•
•
•
•
•
•
•
Wireless
IEEE 802.11b/g
Atheros
500 mWatt transmit power at N-connector
Transmit power control
Frequency band: 2.4-2.4835GHz
Media Access Protocol: CSMA/CA with ACK
Data Rates: OFDM@54Mbps, CCK@11/5.5Mbps, QPSK@2Mbps and DBSK@1Mbps
AP Range: 2000 meters line of sight (client dependent)
WDS Range: 20,000 meters line of sight (antenna dependent)
Mesh OLSR protocol
87 dBm - 81 dBm receive sensitivity b mode
86 dBm – 68 dBm receive sensitivity g mode
•
•
•
•
•
•
DHCP Client and Server
6 WDS repeater links
AP client mode
802.1d Bridging functionality
UPnP
MAC cloning
•
•
•
MAC based access control
64/128 bit RC4 WEP
Wireless Protected Access (WPA-PSK, TKIP and AES)(WPA2-PSK, TKIP and AES)
•
•
•
•
Management
Web-based management
Antenna alignment and RSSI monitoring
Web-based or TFTP firmware upgrade
System logging (local or remote)
Networking
Security
2002-2011 VP Networks, Inc. All Rights Reserved
www.valuepointnet.com
•
•
•
SNMP v1/v2, MIB II with traps, 802.1x, 802.1d MIBs
Telnet
Auto discovery Tool
•
Interfaces
1 10/100M Ethernet LAN port
•
•
•
•
•
•
•
Operating Environment
UL 2043 Plenum rated
NEMA and IP 68 rated for outdoor operation
High vibration certification
Operating Temperature: -20 to 70 C
Storage Temperature: -20 to 70 C
Humidity: Max. 95% non-condensing
10 x 6 x 2.3 In. / 3 Lbs.
•
Electrical
48V Power Over Ethernet (POE)
•
Regulatory Approvals
FCC part 15 Class B, VCCI Class B, CE Mark, UL
•
•
Advanced Firmware Features included
802.1x Port-based Network Access Control (EAP-MD5, EAP-TLS)
Wireless Client Isolation
•
•
Warranty
One year parts and labor
30 day satisfaction guaranteed
2002-2011 VP Networks, Inc. All Rights Reserved
www.valuepointnet.com
Download PDF
Similar pages