HPE Synergy 660 Gen9 Compute Module

QuickSpecs
HPE Synergy 660 Gen9 Compute Module
Overview
HPE Synergy 660 Gen9 Compute Module
1.
2.
3.
4.
HPE Synergy 660 Gen9 Compute Module – Internal View
Micro SD slot
5. iLO Management engine
USB 3.0 connector
6. Up to four (4) Intel Xeon processors
Hot Plug Drive bays ( 4 SFF Drives or 8 M.2 uFF Drives)
7. Forty Eight (48) DIMM slots ( 12 slots per processor)
TPM Connector (under drive cage)
8. Mezzanine Connectors (x16 PCIe 3.0)
HPE Synergy, the first platform built from the ground up for Composable Infrastructure, offers an experience that empowers IT to
create and deliver new value instantly and continuously. It is a single infrastructure that reduces operational complexity for
traditional workloads and increases operational velocity for the new breed of applications and services. Through a single interface,
HPE Synergy composes physical and virtual compute, storage, and fabric pools into any configuration for any application. As an
extensible platform, it easily enables a broad range of applications and operational models such as virtualization, hybrid cloud, and
DevOps. With HPE Synergy, IT can become not just the internal service provider but the business partner to rapidly launch new
applications that become the business.
HPE Synergy supports both two-socket and four-socket compute modules which provide the performance, scalability, density
optimization, storage simplicity, and configuration flexibility to power a variety of workloads, including business processing, IT
infrastructure, web infrastructure, collaborative, and high-performance computing.
The HPE Synergy 660 Gen9 Compute Module delivers higher performance and scalability for your demanding, enterprise dataintensive workloads. The powerful processors and broader memory footprint in a full-height form factor give your applications like
structured databases and business processing the resources they demand.
HPE Synergy offers additional compute module options (that have individual QuickSpecs) including:
• HPE Synergy 480 Gen9 (2-socket, general purpose)
• HPE Synergy 620 Gen9 (2-socket, mission critical)
• HPE Synergy 680 Gen9 (4-socket, mission critical)
Page 1
QuickSpecs
HPE Synergy 660 Gen9 Compute Module
Overview
This QuickSpecs document focuses on the HPE Synergy 660 Gen9 Compute Module.
Page 2
QuickSpecs
HPE Synergy 660 Gen9 Compute Module
Standard Features
NOTE: This document covers the HPE Synergy 660 Gen9 compute module only. For information on HPE Frame 12000 Frame,
interconnect, and mezzanine components, please see the HPE Synergy 12000 Frame Specifications.
NOTE: For the Standard Features shipped in the "Factory Integrated Models", please see the "Configuration Information - Factory
Integrated Models" section.
HPE Synergy 660 Gen9 Intel Xeon E5-4650 v4 (2.2GHz/14-core/35MB/105W)
Processor
Two or four of the HPE Synergy 660 Gen9 Intel Xeon E5-4640 v4 (2.1GHz/12-core/30MB/105W)
following
HPE Synergy 660 Gen9 Intel Xeon E5-4660 v4 (2.2GHz/16-core/40MB/120W)
HPE Synergy 660 Gen9 Intel Xeon E5-4610 v4 (1.8GHz/10-core/25MB/105W)
HPE Synergy 660 Gen9 Intel Xeon E5-4667 v4 (2.2GHz/18-core/45MB/135W)
HPE Synergy 660 Gen9 Intel Xeon E5-4669 v4 (2.2GHz/22-core/55MB/135W)
HPE Synergy 660 Gen9 Intel Xeon E5-4655 v4 (2.5GHz/8-core/30MB/135W)
HPE Synergy 660 Gen9 Intel Xeon E5-4620 v4 (2.1GHz/10-core/25MB/105W)
HPE Synergy 660 Gen9 Intel Xeon E5-4627 v4 (2.6GHz/10-core/25MB/135W)
NOTE: Supports 2 or 4 processors. All processors within the compute module must be identical.
NOTE: DDR4 speed is the maximum memory speed of the processor. Actual memory speed may depend
on the quantity and type of DIMMs installed. Please see the see the "Memory" section later in this
document.
Chipset
Intel® C610 Series Chipset
Intel® E5-4600v4 Processor Family
NOTE: For more information regarding Intel chipsets, please see the following:
http://www.intel.com/products/server/chipsets/
On System
Management
Chipset
HPE iLO (Firmware HPE iLO4 2.0), 4GB NAND with 1GB USB user space configurable via UEFI and accessible
via iLO. Read and learn more in the iLO QuickSpecs.
NOTE: For more information, visit: http://www8.hp.com/us/en/products/servers/ilo/index.html
Memory Protection Advanced ECC
Memory Mirroring
Memory Online Spare Mode (Rank Spare Mode)
Type
Memory
One of the following
depending on Model
HPE SmartMemory
DDR4 Load Reduced (LRDIMM), or Registered (RDIMM)
DIMM Slots Available
48 (12 DIMM slots per processor, 4 channels per processor, 3 DIMMs per
channel)
Maximum (LRDIMM)
6.0TB (48 x 128GB)
Maximum (RDIMM)
1.5TB (48 x 32GB)
NOTE: HPE memory from previous generation servers (DDR3) is not compatible with this compute module.
HPE SmartMemory is required to realize the memory performance improvements and enhanced
functionality listed in this document for Gen9. For additional information, please see the HPE Server
Page 3
QuickSpecs
HPE Synergy 660 Gen9 Compute Module
Standard Features
memory: https://www.hpe.com/us/en/servers/memory.html
NOTE: LRDIMM and RDIMM are distinct memory technologies and cannot be mixed within a compute
module. Please see HPE SmartMemory QuickSpecs at: https://www.hpe.com/us/en/productcatalog/servers/server-memory/pip.models.server-memory.7281077.html
NOTE: Depending on the memory configuration and processor model, the memory speed may run at
2133MHz, 1866MHz, or 1600MHz.
Memory Speed Table
Synergy 3DPC EP Platform
DIMM Type
HPE SKU P/N
805347-B21
HPE 8GB 1Rx8 PC42400T-R Kit
Single Rank (1R)
8GB
1.2V
1G
x8
8Gb
17-17-17
SKU Description
DIMM Rank
DIMM Capacity
Voltage
DRAM depth [bit]
DRAM Width [bit]
DRAM Density
CAS Latency
DIMM Native Speed
2400
(MT/s)
HPE Server Memory Speed (MT/s)
1 DIMM Per Channel
2400
2 DIMM Per Channel
2133
3 DIMM Per Channel
1866
DIMM Type
HPE SKU P/N
Register DIMM (RDIMM)
805349-B21
836220-B21
HPE 16GB 1Rx4 PC4HPE 16GB 2Rx4 PC42400T-R Kit
2400T-R Kit
Single Rank (1R)
Dual Rank (2R)
16GB
16GB
1.2V
1.2V
2G
1G
x4
x4
8Gb
4Gb
17-17-17
17-17-17
805351-B21
HPE 32GB 2Rx4
PC4-2400T-R Kit
Dual Rank (2R)
32GB
1.2V
2G
x4
8Gb
17-17-17
2400
2400
2400
2400
2133
1866
2400
2133
1866
2400
2133
1866
805353-B21
HPE 32GB 2Rx4 PC42400T-L Kit
Dual Rank (2R)
32GB
1.2V
2G
x4
8Gb
17-17-17
Load Reduced (LRDIMM)
805358-B21
HPE 64GB 4Rx4 PC4-2400T-L
Kit
Quad Rank (4R)
64GB
1.2V
2G
x4
8Gb
17-17-17
809208-B21
HPE 128GB 8Rx4 PC42400U-L Kit
Octal Rank (8R)
128GB
1.2V
2G
x4
8Gb
20-18-18
2400
2400
2400
2400
2400
2133
2400
2400
2133
2400
2400
2133
SKU Description
DIMM Rank
DIMM Capacity
Voltage
DRAM depth [bit]
DRAM Width [bit]
DRAM Density
CAS Latency
DIMM Native Speed
(MT/s)
HPE Server Memory Speed (MT/s)
1 DIMM Per Channel
2 DIMM Per Channel
3 DIMM Per Channel
Page 4
QuickSpecs
HPE Synergy 660 Gen9 Compute Module
Standard Features
Network Controller HPE Synergy 3820C 10/20Gb Converged Network Adapter
NOTE: Supports full hardware offload of FCoE storage protocol processing for highest performance
converged Ethernet data and storage networks.
HPE Synergy 2820C 10Gb Converged Network Adapter
NOTE: Delivers flexibility to compose multiple network flows including Ethernet and FCoE or iSCSI within
each connection.
Standard iLO Network Controller:
One (1) 1Gbps port for the HPE iLO 4 to HPE Synergy Composer link.
Mezzanine
connectors
Six (6) I/O expansion mezzanine connectors:
• Mezzanine connector 1 is x16 PCIe 3.0 Type D (supports Type C and Type D mezzanine cards) for
fabric 1.
NOTE: This mezzanine connector supports dual-port mezzanine cards: one port is routed to
interconnect module bay 1 and the other to bay 4.
• Mezzanine connector 2 is x16 PCIe 3.0 Type D (supports Type C and Type D mezzanine cards) for
fabric 2.
NOTE: This mezzanine connector supports dual-port mezzanine cards:. one port is routed to
interconnect module bay 2 and the other to bay 5.
• NOTE: The HPE Synergy 660 Gen9 supports 2 or 4 processors. Mezzanine 2 and 5 are only
supported when 4 processors are installed.
• Mezzanine connector 3 is x16 PCIe 3.0 Type C (supports Type C mezzanine cards) for fabric 3.
NOTE: This mezzanine connector supports dual-port mezzanine cards: one port is routed to
interconnect module bay 3 and the other to bay 6.
• Mezzanine connector 4 is x16 PCIe 3.0 Type D (supports Type C and Type D mezzanine cards) for
fabric 1.
NOTE: This mezzanine connector supports dual-port mezzanine cards: one port is routed to
interconnect module bay 1 and the other to bay 4,
• Mezzanine connector 5 is x16 PCIe 3.0 Type D (supports Type C and Type D mezzanine cards for
fabric 2.
NOTE: This mezzanine connector supports dual-port mezzanine cards:. one port is routed to
interconnect module bay 2 and the other to bay 5.
• NOTE: The HPE Synergy 660 Gen9 supports 2 or 4 processors. Mezzanine 2 and 5 are only
supported when 4 processors are installed.
• Mezzanine connector 6 is x16 PCIe 3.0 Type C (supports Type C mezzanine cards) for fabric 3.
NOTE: This mezzanine connector supports dual-port mezzanine cards: one port is routed to
interconnect module bay 3 and the other to bay 6.
Mezzanine options include:
• Dual-port 10/20Gb compute module mezzanine adapter options for additional network ports
• Dual-port 16Gb Fibre Channel HBA for SAN connectivity
• 2GB FBWC storage adapter for direct-attached storage
HPE Compute
Module ROM
HPE ROM (read only memory) is now digitally signed using HPE's Corporate Signing Service. This signature is
verified before the flash process starts, reducing accidental programming and preventing malicious efforts to
corrupt system ROM.
HPE ROM provides for essential initialization and validation of hardware components before control is passed
to the customer-installed operating system. The ROM also provides the capability of booting from various
fixed media (HDD, CD-ROM) and removable media (USB), to continue operation to the operating system.
HPE ROM performs very early configuration of the video controller, to allow monitoring of initialization
Page 5
QuickSpecs
HPE Synergy 660 Gen9 Compute Module
Standard Features
progress via an attached monitor. If configuration or hardware errors are discovered during this early phase of
hardware initialization, suitable messages are now displayed on the connected monitor. Additionally, these
configuration or hardware errors are logged to the Integrated Management Log (IML) to assist in diagnosis.
HPE's ROM is used to configure the following:
• Processor and chipset status registers
• System memory, memory map, and memory initialization
• System hardware configuration (integrated PCI devices and optional PCIe cards).
• Customer-specific BIOS configuration using the HPE ROM-Based Setup Utility (RBSU).
NOTE: For further information, please refer to HPE's RBSU (ROM based setup utility) user guide:
http://www.hp.com/support/RBSU_UG_en
HPE Server Unified
Extensible
Firmware Interface
(UEFI) or Legacy
Mode
HPE's System BIOS is an EDK2 UEFI solution, and adheres to the latest revisions of UEFI Class 2
specifications which supports both legacy boot and UEFI boot operation. The HPE Synergy 660 Gen9
defaults to UEFI boot operation and can be factory or field configured for Legacy boot operation.
NOTE: For UEFI boot operation, boot environment and OS image installations should be configured
properly to support UEFI.
NOTE: For more information on HPE's System BIOS and UEFI, see the UEFI Information Library:
http://www.hp.com/go/uefi/docs.
NOTE: HPE Legacy FIO Mode Setting (758959-B22) can be selected to configure the system in UEFI mode
in the factory.
To modify the compute module configuration ROM default settings, press F9 in the HPE POST screen to
enter the UEFI System Utilities screen. By default, the System Utilities menus are in the English language.
UEFI enables numerous new capabilities, including both industry standard functionality and features specific
to HPE servers. Following are some of the features that UEFI enables and that the HPE Synergy 660 Gen9
can support when configured for UEFI boot operation:
• Secure Boot - A new feature in which the system firmware, option card firmware, operating systems,
and software collaborate to greatly enhance platform security.
• Operating system specific functionality - Microsoft Windows 2012 supports several features only
when installed in UEFI mode.
• Support for > 2.2 TB (using GPT) boot drives - Such drives could previously only be used for boot
drives when using RAID solutions such as HPE Smart Array.
• UEFI Shell - Provides a pre-boot environment for running scripts and tools. The HPE UEFI Shell
provides both standard capabilities as well as numerous enhancements.
• PXE boot support for IPv6 networks.
• PXE Multicast Boot allowing for faster PXE deployments for large numbers of servers.
• Boot support for option cards that only support a UEFI option ROM.
NOTE: When the server is configured for UEFI Boot Mode, PXE servers must be configured with a UEFI
boot image.
NOTE: When the server boots in UEFI mode, it does not boot media with a legacy OS installation. This
includes DOS targets and Windows or Linux systems installed in Legacy mode. The reverse is also true for
servers that boot in Legacy mode.
Storage Controller
Choice of:
• HPE Smart Array P240nr Controller with 1GB Flash-Backed Write Cache (FBWC) supporting RAID 0,
1, 10, 5, 6, and 1 ADM
• HPE Smart Array P542D Controller with 2GB Flash-Backed Write Cache (FBWC) supporting RAID 0,
1, 10, 5, 50, 6, 60, 1 ADM, and 10 ADM
• HPE H240nr Smart HBA supporting RAID 0, 1, 10, 5
Page 6
QuickSpecs
HPE Synergy 660 Gen9 Compute Module
Standard Features
•
HPE B140i (chipset SATA)
8.0TB
4 x 2.0TB
Maximum Internal Hot Plug SFF SAS
Storage
Hot Plug SFF SATA
8.0TB
4 x 2.0TB
One of the following
15.36TB
4 x 3.84TB
depending on Model Hot Plug SFF SAS SSD
Hot Plug SFF SATA SSD 6.4TB
4 x 1.6TB
Hot Plug SFF NVMe SSD 8.0TB NVMe
4 x 2.0TB NVMe
Hot Plug uFF SATA SSD 2.72TB
8 x 340GB
NOTE: The Synergy 660 Gen9 compute module includes the HPE hot plug small form factor (SFF)
SmartDrive carrier for enhanced management and reduced maintenance errors. HPE drives from previous
generation servers (prior to Gen8) are not compatible with the Synergy 660 Gen9 drive bays.
Interfaces
Micro SDHC Slot
One (1) internal Micro Secure Digital High Capacity (Micro SDHC) card slot
USB 3.0 Port
One (1) internal USB 3.0 connector for USB flash media drive keys
USB 3.0 Port
One (1) external USB 3.0 connector for USB flash media drive keys
NOTE: The above internal options are intended for integrated hypervisor virtualization environments.
Industry Standard
Compliance
ACPI 2.0
Microsoft® Logo certifications
USB 3.0 Support
IPMI 2.0
Secure Digital 2.0
TPM 1.2 and 2.0 Support
IEEE (specific IEEE standards depending on Ethernet adapter card(s) installed)
Advanced Encryption Standard (AES)
Triple Data Encryption Standard (3DES)
SNMP
SSL 2.0
DMTF Systems Management Architecture for Server Hardware Command Line Protocol (SMASH CLP)
Active Directory v1.0
PCIe 3.0
ASHRAE A3
Operating Systems
and Virtualization
Software Support
for Compute
modules
• Microsoft Windows Server 2012 Datacenter and 2012 R2 Datacenter
• Microsoft Windows Server 2012 Standard and 2012 R2 Standard
• Microsoft Hyper-V Server 2012 and 2012 R2
• Microsoft Windows Server 2016 Standard Edition (includes Nano Server)
• Microsoft Windows Server 2016 Datacenter Edition (includes Nano Server)
• Microsoft Hyper-V 2016
• Red Hat Enterprise Linux 6.7, 6.8, 7.2, and 7.3 GA (64-bit) (includes KVM & RHEVH)
• SUSE Linux Enterprise Server 11 SP4, 12 SP1, 12 SP2, and 12 SP3 (64-bit) (includes XEN & KVM)
• VMware vSphere 5.5 U3, 6.0 U3 and 6.5
NOTE: In addition, CentOS 6.7, 6.8, 7.2, and 7.3 is qualified as a community/regional enabled operating
system.
NOTE: Operating System support may change. To get the most updated information, please go to the HPE
OS Support Matrix at http://www.hpe.com/info/ossupport
Page 7
QuickSpecs
HPE Synergy 660 Gen9 Compute Module
Standard Features
Frames
HPE Synergy 12000 Frame, is the base for all Synergy products and supports:
• Up to 12 half-height, 6 full-height single-wide, or 3 full-height double-wide Compute Modules (mixing
allowed)
• Up to 5 half-height double-wide HPE Synergy D3940 Storage Modules (mixing with compute
modules in any to any ratio allowed)
• One HPE Synergy 12000 Frame will support up to six (6) HPE Synergy 660 Gen9 Compute Modules
Graphics
Integrated Matrox G200eh video controller
• 1600 x 1200 (32 bpp)
• 1920 x 1200 (16 bpp)
HPE iLO Management On System Management Memory
• 16 MB Flash Video Memory
• 256 MB DDR 3 with ECC (112 MB after ECC and video)
Form Factor
HPE Synergy 660 Gen9 is a full-height, single-wide, compute module that plugs into the HPE Synergy Frame
12000.
HPE management
solution
HPE Synergy Composer
with HPE OneView
HPE Integrated Lights
Out
UEFI
HPE RESTful API
Intelligent Provisioning
Server Utilities
HPE Smart Update
Scripting Tool Kit and
Windows PowerShell
HPE RESTful Interface
Tool
HPE iLO Mobile
Application
Security
•
•
•
•
HPE Synergy integrates HPE OneView to deliver ‘composable infrastructure’ with
a view of resources. This flexible and scalable solution provides IT managers with
the architecture to implement their software-defined data center (SDDC) -- and to
address the changing business needs and the challenges of today's enterprise
data centers.
Monitor your servers for ongoing management, service alerting, reporting and
remote management with iLO. Learn more at http://www.hp.com/go/ilo
Configure and boot your servers securely with industry standard Unified
Extensible Firmware Interface (UEFI). Learn more at http://www.hp.com/go/uefi
RESTful API is an application programming interface. RESTful Web Service API
served by iLO’s web server.
http://www.hp.com/go/restfulapi
Provision servers by discovering and deploying 1 to few servers with Intelligent
Provisioning. Learn more at http://www.hp.com/go/intelligentprovisioning
Optimize firmware and driver updates with HPE Smart Update solutions. Learn
more at http://www.hp.com/go/smartupdate.
Provision 1 to many servers using your own scripts to discover and deploy them
with HPE Scripting Tool Kit for Windows and Linux or HPE Scripting Tools for
Windows PowerShell.
HPE RESTful API tool is a scripting tool to provision servers using RESTful API
Interface to discover and deploy servers at scale. Learn more at
http://www.hp.com/go/restfulapi
Enables the ability to access, deploy, and manage your server anytime from
anywhere from select smartphones and mobile devices. For additional information
please visit: http://www.hp.com/go/ilo/mobileapp
Power-on password
Administrator's password
Keyboard password (QuickLock)
HPE iLO Management On System Management Chipset with:
Page 8
QuickSpecs
HPE Synergy 660 Gen9 Compute Module
Standard Features
SSL encryption
Secure Shell version 2
Advanced Encryption Standard (AES) and Triple Data Encryption Standard (3DES) on browser,
CLP and XML scripting interface
– AES and RC4 encryption of video
External USB port enable/disable
Network server mode
Serial interface control
TPM (Trusted Platform Module) 1.2 option
Advanced Encryption Standard (AES)
Intel® Advanced Encryption Standard-New Instructions (AES-NI)
–
–
–
•
•
•
•
•
•
Availability
Memory
• Advanced ECC uses single device data correction (SDDC) to detect and correct single and all multi-bit
error that occurs within a single DRAM chip. Both x4 and x8 SDDC are supported (x8 requires
lockstep mode).
• Memory online spare mode (also known as rank spare mode) detects a rank that is degrading and
switches operation to the spare rank.
• Memory demand and patrol scrubbing to prevent accumulation of correctable errors and reducing the
likelihood of unplanned downtime.
• Failed DIMM isolation improves the service time thus improving the overall system availability.
• Address parity protection available on RDIMMs and LRDIMMs detects address bit errors to improve
service time and overall system availability.
Mezzanine options and I/O
• Multiple I/O mezzanine connectors that support a wide variety of mezzanine cards each supporting
multiple data paths routed to redundant interconnect modules.
• Network Adapter Teaming (bonding) provides network fault tolerance, transmit load balancing, and
switch-assisted load balancing.
Storage
• Four (4) Small Form Factor hot-plug SmartDrive drive bays. Each can hold 2 uFF m.2 drives, for a
total capacity of 8 uFF drives.
• Choice of the HPE Smart Array P240nr Controller with 1GB FBWC, HPE Synergy Smart Array P542D
Controller with 2GB FBWC, HPE H240nr Smart HBA, or the HPE B140i (Chipset SATA).
• RAID 0,1, and 5 support for all storage controller offerings.
• Optional dual-port Fibre Channel mezzanine card(s) for redundant SAN connections.
Processor/Chipset
• Processor internal sensors & thermal control protection against over-temperature conditions.
• Cache parity/ECC protects cache data from accidental data corruption.
• Machine Check Architecture (MCA) detects and captures hardware errors such as system bus,
memory ECC, parity, and cache, and improves service time.
• Intel® QPI Protocol Protection allows detection of data errors using a checksum of 8-bits.
• Core Disable for FRB (fault resilient boot) allows a system to power-on despite a failing core-pair. It
uses BIST (built-in self test) results to detect a failure and disables the target core-pair upon
subsequent boot.
HPE Synergy 12000 Frame
• Up to 12 half-height, 6 full-height single-wide, or 3 full-height double-wide Compute Modules
(mixing allowed)
• Up to 5 half-height double-wide HPE Synergy D3940 Storage Modules (mixing with compute
modules in any to any ratio allowed)
• Ten fans and single Frame Link Module included with every system
Page 9
QuickSpecs
HPE Synergy 660 Gen9 Compute Module
Standard Features
• Two appliance bays for redundant management appliances, embedded OneView and other solutions
to come via REST
• Up to six 2650 Watt Power Supplies of Titanium class efficiency providing 7950 Watts of redundant
power
• Up to 6 ICM module/switch bays for full redundancy of 3 fabrics.
• 2 slots for Frame Link Modules, offers links to multiple frames through a private air-gapped
management network
• HPE Thermal Logic technology to maximize power and cooling efficiency
• HPE Intelligent Resources technology built-in to every option for OneView Auto-Discovery of
resources.
Warranty
This product is covered by a global limited warranty and supported by Hewlett Packard Enterprise Services
and a worldwide network of Hewlett Packard Enterprise Authorized Channel Partners. Hardware diagnostic
support and repair is available for three years from date of purchase. Support for software and initial setup is
available for 90 days from date of purchase. Enhancements to warranty services are available through HPE
Support services or customized service agreements. Certain restrictions and exclusions apply. Drives have
either a one year or three year warranty; refer to specific drive QuickSpecs for details.
NOTE: Compute module warranty includes 3-year Parts, 3-year Labor, 3-year on-site support. Warranty
repairs may be accomplished through the use of Customer Self Repair (CSR) parts. These parts fall into two
categories: 1) Mandatory CSR parts are designed for easy replacement. A travel and labor charge will result
when customers decline to replace a Mandatory CSR part; 2) Optional CSR parts are also designed for easy
replacement but may involve added complexity. Customers may choose to have HPE replace Optional CSR
parts at no charge. Additional information regarding worldwide limited warranty and technical support is
available at http://h18004.www1.hp.com/products/servers/platforms/warranty/index.html.
Page 10
QuickSpecs
HPE Synergy 660 Gen9 Compute Module
Optional Features
Fibre Channel
Support
Up to two (2) optional Fibre Channel mezzanine HBAs are supported on the HPE Synergy 660 Gen9.
Compatible SAN
HPE Synergy 660 Gen9 Compute Modules are optimized for HPE MSA, EVA, 3PAR, XP, and LeftHand
HPE Virtual
Connect
HPE Synergy composable fabric delivers high performance and composability for the delivery of applications
and services. The composable fabric is based on master/satellite architecture
The HPE Virtual Connect SE 40Gb F8 Module, master module, based on composable fabric is designed for
Composable Infrastructure. Its disaggregated, rack-scale design uses a master/satellite architecture to
consolidate data center network connections, reduce hardware and scales network bandwidth across multiple
HPE Synergy Frames.
The master module contains intelligent networking capabilities that extend connectivity to satellite frames
through Interconnect Link Modules. This eliminates top of rack switch need and substantially reduces cost.
The reduction in components also simplifies fabric management at scale while consuming fewer ports at the
data center aggregation layer.
The HPE VC SE 40Gb F8 modules eliminate up to 95% of network sprawl at the compute module edge with
one device that converges traffic inside frames and directly connects to external LANs. Each redundant pair
of Virtual Connect modules provide eight adjustable downlink connections (six Ethernet and two Fibre
Channel, or eight Ethernet ) to dual-port 10Gb and in case of 20Gb Converged Network Adapters 16
adjustable downlinks connections 14 Ethernet and two Fibre Channel) on each compute module. Up to six
uplinks using QSFP+ interfaces are available for connection to upstream Ethernet switches. Including splitter
cables up to 24 uplinks are available for connection to upstream Ethernet and Fibre Channel. The HPE VC SE
40Gb F8 modules avoid the confusion of traditional and other converged network solutions by eliminating
the need for multiple Ethernet and Fibre Channel switches, extension modules, cables and software licenses.
Also, Virtual Connect wire-once connection management is built-in enabling compute modules adds, moves
and replacement in minutes instead of days or weeks. The Master/Satellite disaggregated architecture
removes fixed of ratios of interconnects in every frame and allows extending networking resources pool for
Virtual Connect to satellite frames.
For more information on Virtual Connect and converged network options, see
http://www8.hp.com/us/en/products/servers/bladesystem/virtual-connect.html
Storage Software
Whether you need to solve a specific data protection, archiving, or storage command and control challenge, or
deliver on strategic consolidation, compliance, or continuity initiatives, look no further than HPE storage
software. Our storage software helps you reduce costs, simplify storage infrastructure, protect vital assets and
respond faster to business opportunities.
Storage software that gets the job done:
• Data Protection and Recovery Software
Whether you're a large enterprise or a smaller business, HPE data protection and recovery software
will cost-effectively protect you against disaster and ensure business continuity.
• Data Archive and Migration Software
HPE's storage software enables you to comply with data retention and retrieval requirements,
improve application performance, and reduce costs by efficiently migrating infrequently accessed or
less valuable data to lower cost storage.
• Storage Resource Management Software (SRM)
HPE's storage resource management software reduces operational costs and provides the command
and control foundation you need to efficiently manage and visualize your physical and virtual
Page 11
QuickSpecs
HPE Synergy 660 Gen9 Compute Module
Optional Features
•
•
•
environments.
Data Replication Software
Hewlett Packard Enterprise offers array-based and host-based replication software for use in disaster
recovery, testing, application development and reporting.
Storage Device Management Software
Maximize your investment in HPE storage and networking with software that enables hardwarespecific configuration, performance tuning and connectivity management.
HPE StoreVirtual VSA
HPE StoreVirtual VSA allows you to create fully featured shared storage on a VMware vSphere or
Microsoft Hyper-V virtualized server. To download the license key and StoreVirtual VSA software,
visit: http://www.hp.com/go/unlockVSA
NOTE: You will need your server serial number in order to complete the registration form. Fully
functional, capacity-based licenses are available in 4TB, 10T and 50TB sizes. For more information
and access to the 60-day free trial, visit: http://www.hp.com/go/tryVSA
NOTE: For more information regarding available Storage Software including QuickSpecs, please see:
http://www.hp.com/go/storage/software
Service and
Support
HPE Technology Services offers you a rich portfolio of consulting and support services designed to add value
to our core products and solutions. We have the know-how and experience to put technology to work for you.
We work closely with you, as your strategic partner, leveraging our full services portfolio to make sure that
everything works to help optimize your enterprise.
Choose from services aligned to our product offerings and lifecycle. From proactive onsite services to
innovative support when your products are connected to Hewlett Packard Enterprise, you choose the precise
level of attention and support your business demands.
HPE Technology Services for HPE Synergy
HPE Technology Services delivers confidence, reduces risk and helps customers realize agility and stability.
Connect to Hewlett Packard Enterprise to help prevent problems and solve issues faster. Our support
technology lets you to tap into the knowledge of millions of devices and thousands of experts to stay
informed and in control, anywhere, any time.
Protect your business beyond warranty with HPE Support Services
HPE support services offer complete care and support expertise with committed response choices that are
designed to meet your IT and business needs.
• HPE Foundation Care services offer scalable reactive support-packages for HPE Synergy and
software. You choose the type and level of service that is most suitable for your IT and business
needs.
• HPE Proactive Care keeps your system stable and reliable helping to prevent problems and reduce
outages through proactive service management and enhanced technical response.
Advise, transform, HPE Technology Services helps you get the most out of what you have today and transition to HPE
integrate, support, Synergy, a composable infrastructure, at your pace and from wherever you are on the journey.
automate, and flex
Start with the HPE Transformation Workshop to ensure that your business and IT organizations
collaborate, define the topline strategy for composable, software-defined, cloud-ready infrastructure and
kick-start your projects confidently. This workshop clarifies your business requirements and the issues that IT
and operations teams must resolve in order to meet these requirements. A detailed executive briefing or
high-level report summarizes the strategies, high-level plan and functional requirements.
HPE Modernization and Migration Services helps you choose the right platform for the right workload at
the right cost and evolve your IT infrastructure, processes and organization taking advantage of “on-hybrid
Page 12
QuickSpecs
HPE Synergy 660 Gen9 Compute Module
Optional Features
infrastructure” innovations such as composable, converged, software-defined, technologies. Hewlett Packard
Enterprise experts advise, transform, integrate and implement for platform refresh, datacenter consolidation
virtualization, migration and automation projects.
HPE Flexible Capacity is a pay per use model for on premise infrastructure. This offers needed HPE
Synergy capacity in the datacenter, plus a buffer of additional capacity. As HPE Synergy will be a dynamic
environment, this provides enough room to grow your environment, but only pay for actual metered use.
Technology transitions and refresh can be built in, infrastructure and services are billed monthly, enabling you
to align costs to business use.
HPE Datacenter Care Infrastructure Automation: HPE Synergy with OneView embedded helps enable
infrastructure automation and is integrated with tools such as those from Chef, Puppet, and Docker, to enable
rapid bare metal provisioning. With DC-IA, HPE service experts provide advice, support, best practices, for
these tools that work with OneView to help create a fast, agile, and reliable automated IT environment. With
this approach, customers can deploy faster. DC-IA delivers support to customers to enable infrastructure as
code and agile processes as part of the service. Customers schedule quarterly reviews and reports with HPE
Center of Expertise, as well as having access to these experts when needed, for automation development and
code coaching.
Choose the right support to maximize uptime, free up your resources, and achieve improved value—as you
get the most out of the existing IT assets while accelerating time-to-revenue.
Optimized Support HPE Proactive Care Advanced - 24x7 coverage, three year Support Service
Builds and incorporates on Proactive Care and also gives customers personalized technical and operational
advice from an assigned, local Account Support Manager for personalized technical collaboration, flexible
access to specialist skills to help optimize business critical IT, and Critical Incident Management to help so the
business is not affected if there is a system or device outage. This recommendation provides 24x7 coverage
with four-hour response for hardware and Basic Software Support and Collaborative Call Management for
selected non-HPE software that offers two-hour callback for supported software issues.
https://www.hpe.com/h20195/v2/GetPDF.aspx/4AA5-3259ENW.pdf
Standard Support
HPE Proactive Care with 24x7 coverage, three year Support Service
Hardware and software support services designed specifically for your technology with rapid access to
Advanced Solution Center specialists for start to finish case management plus proactive reports and
recommendations for firmware and software management and best practice advice. This recommendation
provides 24x7 coverage with four-hour response for hardware and Basic Software Support and Collaborative
Call Management for selected non-HPE software that offers two-hour callback for supported software issues.
https://www.hpe.com/h20195/v2/GetPDF.aspx/4AA3-8855ENW.pdf
Deploy and
integrate
HPE Synergy First Frame Installation and Startup - Provides for hardware installation (HPE Synergy
compute modules, Storage Modules, Virtual Connect modules, Interconnect Link Modules, Frame Link
Modules, and HPE Synergy D3940 Storage Modules) and software startup for the first frame of your HPE
Synergy deployment. Additional frames can be added using the HPE Synergy Additional Frame Installation
and Startup Service.
HPE Synergy Additional Frame Installation and Startup Service - Add additional frames to your HPE
Synergy First Frame Startup service or expand your existing HPE Synergy Infrastructure.
HPE Education
Services
Training your IT staff is critical to help drive the value of HPE Synergy with increased efficiencies and better
business outcomes. Training is key to the transformation and management of HPE Synergy.
Parts and Materials Hewlett Packard Enterprise will provide HPE-supported replacement parts and materials necessary to
Page 13
QuickSpecs
HPE Synergy 660 Gen9 Compute Module
Optional Features
maintain the covered hardware product in operating condition, including parts and materials for available and
recommended engineering improvements.
Parts and components that have reached their maximum supported lifetime and/or the maximum usage
limitations as set forth in the manufacturer's operating manual, product quick-specs, or the technical product
data sheet will not be provided, repaired, or replaced as part of these services.
The defective media retention service feature option applies only to Disk or eligible SSD/Flash Drives replaced
by Hewlett Packard Enterprise due to malfunction.
For more
information
Additional Support Services can be found at HPE Support Services Central
http://ssc.hpe.com
Page 14
QuickSpecs
HPE Synergy 660 Gen9 Compute Module
Pre-Configured Models
NOTE: For the Standard Features shipped in the "Factory Integrated Models", please see the "Configuration Information Factory Integrated Models" section.
NOTE: Pre-configured models ship with the configurations below. Options can be selected from the Core or Additional options
section of this QuickSpecs.
NOTE: Hewlett Packard Enterprise does not allow factory integration of options into pre-configured models. Any additional
options purchased will be shipped separately.
NOTE: If you desire a custom configuration please see "Configuration Information - Factory Integrated Models" section of this
QuickSpecs.
NOTE: All Pre-configured Models come populated with some hard drive blanks installed.
Models
SKU Number
Processors
Memory
Storage Controllers
Network Mezzanine
Adapters
Local Drives
Security
USB and MicroSD
Management
HPE Synergy 660 Gen9 E5-4610v4 2P Compute
Module
Entry
HPE Synergy 660 Gen9 E5-4650v4 4P Compute
Module
Performance
826958-B21
Two (2) Intel® Xeon® E5-4610v4
64GB (4 x 16GB PC402400T-R)
One (1) HPE H240nr Smart Host Bus Adapter
826956-B21
Four (4) Intel® Xeon® E5-4650v4
256GB (16 x 16GB PC402400T-R)
One (1) HPE Smart Array P240nr/1GB FBWC
HPE Synergy 3820C 10/20Gb CNA
HPE Synergy 2820C 10Gb CNA
0 to 4 small form factor (SFF) HPE Smart Drives or up to 8 micro form factor (uFF) drives
TPM module 1.2 or 2.0
One (1) front USB 3.0 port, One (1) internal USB 3.0 port, One (1) MicroSD
HPE OneView, HPE iLO, HPE RESTful Interface Tool
Page 15
QuickSpecs
HPE Synergy 660 Gen9 Compute Module
Configuration Information- Factory Integrated Models
NOTE: This section lists some of the steps required to configure a Factory Integrated Model (configure-to-order or CTO
compute module). To ensure only valid configurations are ordered, Hewlett Packard Enterprise recommends the use of an
Hewlett Packard Enterprise approved configurator. Contact your local sales representative for information on CTO product
offerings and requirements.
NOTE: Configure-to-order compute modules must start with a CTO Compute Module.
NOTE: FIO indicates that this option is only available as a factory installable option.
NOTE: All Factory Integrated Models will be populated with sufficient drive blanks based on the number of initial drives ordered
with the server.
NOTE: The Factory integrated diskless model ships with a grill blank in place of the drive cage and drive backplane.
Step 1: Select a Configurable Compute Module below
Models
HPE Synergy 660 Gen9 HPE Synergy 660 Gen9 Configure- HPE Synergy 660 Gen9 ConfigureConfigure-to-Order SAS
to-Order SATA Compute Module
to-Order Expanded Storage
Compute Module
Compute Module
732360-B21
732361-B21
732365-B21
SKU Number
Processors
Two (2) or four (4) Intel® Xeon® E5-4600v4 series processors
Two (2) to forty-eight (48) DIMM slots for DDR4 RDIMM or LRDIMM Memory (minimum one per
Memory
processor)
HPE B140i (chipset SATA)
HPE Smart Array P542D/2GB FBWC
Storage Controllers Choices of HPE H240nr Smart
Host Bus Adapter or HPE
12Gb Mezzanine SAS Controller
Smart Array P240nr/1GB
FBWC
Choice of:
Network Mezzanine
• HPE Synergy 3820C 10/20Gb CNA
Adapters
• HPE Synergy 2820C 10Gb CNA
Local Drives
0 to 4 small form factor (SFF) HPE Smart Drives or up to 8 micro form factor (uFF) drives
Security
TPM module 1.2 or 2.0
USB and MicroSD
One (1) front USB 3.0 port, One (1) internal USB 3.0 port, One (1) MicroSD
Management
HPE OneView, HPE iLO, HPE RESTful Interface Tool
Step 2: Choose Required Options (one of the following from each list unless otherwise noted)
HPE Processors
NOTE: If four processors are desired, select one xxxxxx-L21 here in Step 2 and one
corresponding xxxxxx-B21 in Step 4.
HPE Synergy 660 Gen9 Intel® Xeon® E5-4660v4 (2.2GHz/16-core/40MB/120W) FIO
Processor Kit
HPE Synergy 660 Gen9 Intel® Xeon® E5-4650v4 (2.2GHz/14-core/35MB/105W) FIO
Processor Kit
HPE Synergy 660 Gen9 Intel® Xeon® E5-4640v4 (2.1GHz/12-core/30MB/105W) FIO
Processor Kit
HPE Synergy 660 Gen9 Intel® Xeon® E5-4620v4 (2.1GHz/10-core/25MB/105W) FIO
Processor Kit
HPE Synergy 660 Gen9 Intel® Xeon® E5-4610v4 (1.8GHz/10-core/25MB/105W) FIO
Processor Kit
HPE Synergy 660 Gen9 Intel® Xeon® E5-4669v4 (2.2GHz/22-core/55MB/135W) FIO
Processor Kit
HPE Synergy 660 Gen9 Intel® Xeon® E5-4667v4 (2.2GHz/18-core/45MB/135W) FIO
Processor Kit
827208-L21
827209-L21
827210-L21
827211-L21
827212-L21
827213-L21
827214-L21
Page 16
QuickSpecs
HPE Synergy 660 Gen9 Compute Module
Configuration Information- Factory Integrated Models
HPE Synergy 660 Gen9 Intel® Xeon® E5-4655v4 (2.5GHz/8-core/30MB/135W) FIO
Processor Kit
HPE Synergy 660 Gen9 Intel® Xeon® E5-4627v4 (2.6GHz/10-core/25MB/135W) FIO
Processor Kit
NOTE: Supports 2 or 4 processors. All processors within the compute module must be
identical. All processor kits contain two processors.
NOTE: DDR4 speed is the maximum memory speed of the processor. Actual memory
speed may depend on the quantity and type of DIMMs installed. Please see the see the
"Memory" section later in this document.
HPE Memory
Load Reduced (LRDIMMs) – E5-4600 v4 Series Processors
HPE 32GB (1x32GB) Dual Rank x4 DDR4-2400 CAS-17-17-17 Load Reduced Memory Kit
HPE 64GB (1x64GB) Quad Rank x4 DDR4-2400 CAS-17-17-17 Load Reduced Memory
Kit
NOTE: HPE memory from previous generation servers (DDR3) is not compatible with this
compute module. HPE SmartMemory is required to realize the memory performance
improvements and enhanced functionality listed in this document for Gen9. For additional
information, please see the HPE SmartMemory QuickSpecs at:
https://www.hpe.com/h20195/v2/GetHTML.aspx?docname=c04111535
NOTE: LRDIMM and RDIMM are distinct memory technologies and cannot be mixed
within a compute module.
HPE Storage
Controllers
827216-L21
NOTE: A minimum of two (2) memory kits must be selected for 2P configurations or four
(4) memory kits if configuring a 4P Model.
HPE SmartMemory
Registered DIMMs (RDIMMs) – E5-4600 v4 Series Processors
HP 8GB (1x8GB) Single Rank x8 DDR4-2400 CAS-17-17-17 Registered Memory Kit
HP 16GB (1x16GB) Single Rank x4 DDR4-2400 CAS-17-17-17 Registered Memory Kit
HPE 16GB (1x16GB) Dual Rank x4 DDR4-2400 CAS-17-17-17 Registered Memory Kit
HP 32GB (1x32GB) Dual Rank x4 DDR4-2400 CAS-17-17-17 Registered Memory Kit
HPE Networking
827215-L21
10/20Gb Mezzanine Adapters
NOTE: The compute module requires a minimum of one (1) mezzanine network adapter.
NOTE: Mezzanine network adapters can be installed in any mezzanine connector.
Hewlett Packard Enterprise best practice is to install the first network adapter in
mezzanine connector 3 to facilitate installation of Type C and D mezzanines in
mezzanine connectors 1 or 2
HPE Synergy 6810C 25/50Gb Ethernet Adptr
HPE Synergy 2820C 10Gb Converged Network Adapter
NOTE: Please see QuickSpecs for technical specifications and additional information at
https://www.hpe.com/h20195/v2/GetPDF.aspx/c04815120.pdf
HPE Synergy 3820C 10/20Gb Converged Network Adapter
NOTE: Please see QuickSpecs for technical specifications and additional information at
https://www.hpe.com/h20195/v2/getpdf.aspx/c04815124.pdf
HPE Smart Array P240nr/1GB FBWC 12Gb 1-port Internal SAS Controller
NOTE: Either 758801-B21 or 814069-B21 MUST be selected with HPE Synergy 660
Gen9 CTO SAS Compute Module (732360-B21)
HPE H240nr 12Gb 1-port Int FIO Smart Host Bus Adapter
805347-B21
805349-B21
836220-B21
805351-B21
805353-B21
805358-B21
867322-B21
794538-B21
777430-B21
758801-B21
814069-B21
Page 17
QuickSpecs
HPE Synergy 660 Gen9 Compute Module
Configuration Information- Factory Integrated Models
NOTE: Either 758801-B21 or 814069-B21 MUST be selected with HPE Synergy 660
Gen9 CTO SAS Compute Module (732360-B21)
HPE Smart Array P542D/2GB FBWC 12Gb Mezzanine SAS Controller
NOTE: MUST be selected with HPE Synergy 660 Gen9 CTO Exp Storage Compute
Module (732365-B21)
NOTE: An HPE Smart Storage Battery with 260mm Cable (782958-B21) is also required
with this controller.
HPE Synergy FIO Internal Chipset SATA Board Kit
NOTE: Must be selected with HPE Synergy 660 Gen9 CTO SATA Compute Module
(732361-B21) along with the Enable B140i setting option (784308-B21).
HPE SAS Cable
HPE Compute Module Smart Array P542D SAS Cable
NOTE: If a P542D controller is connected to both the Internal (Local Drives) and the
External storage (D3940) Module then this SAS cable must be selected.
If only NVMe drive is selected then two (2) SAS cables are required.
759557-B21
812784-B21
815173-B21
Step 3: Choose Additional Factory Integration Options
BIOS Mode
HP Legacy FIO Mode Setting
NOTE: CANNOT be selected with HP FIO Enable B140i Setting (784308-B21) or HP
Dual 8GB microSD EM USB Kit (741279-B21)
758959-B22
Controller State
HP FIO Enable Smart Array B140i Setting
NOTE: CANNOT be selected with HP Legacy FIO Mode Setting (758959-B21) or if
P542D (759557-B21) / P240nr (814068-B21) or H240nr (814069-B21) Controller is
selected.
HP Manufacturing FIO Enable HBA Mode Setting
784308-B21
792962-B21
Step 4: Choose Additional Options for Factory Integration from Additional Options section below.
NOTE: For more related options please see the following:
• HPE Synergy 12000 Frame QuickSpecs:
https://www.hpe.com/h20195/v2/GetHtml.aspx?docname=c04815113
• HPE Synergy Interconnect and Mezzanine Components
https://www.hpe.com/h20195/v2/GetHtml.aspx?docname=c04815110
• HPE Synergy D3940 Storage Module QuickSpecs
https://www.hpe.com/h20195/v2/GetHtml.aspx?docname=c04815141
Page 18
QuickSpecs
HPE Synergy 660 Gen9 Compute Module
Additional Options
HPE Networking
10/20Gb Mezzanine Adapters
HPE Synergy 6810C 25/50Gb Ethernet Adptr
HPE Synergy 3820C 10/20Gb Converged Network Adapter
HPE Synergy 2820C 10Gb Converged Network Adapter
867322-B21
777430-B21
794538-B21
HPE Fibre Channel HPE Synergy 3830C 16Gb Fibre Channel Host Bus Adapter
HPE Synergy 3530C 16Gb Fibre Channel Host Bus Adapter
777452-B21
777454-B21
HPE Processors
827208-B21
HPE Memory
HPE Synergy 660 Gen9 Intel® Xeon® E5-4660v4 (2.2GHz/16-core/40MB/120W) Processor
Kit
HPE Synergy 660 Gen9 Intel® Xeon® E5-4650v4 (2.2GHz/14-core/35MB/105W) Processor
Kit
HPE Synergy 660 Gen9 Intel® Xeon® E5-4640v4 (2.1GHz/12-core/30MB/105W) Processor
Kit
HPE Synergy 660 Gen9 Intel® Xeon® E5-4620v4 (2.1GHz/10-core/25MB/105W) Processor
Kit
HPE Synergy 660 Gen9 Intel® Xeon® E5-4610v4 (1.8GHz/10-core/25MB/105W) Processor
Kit
HPE Synergy 660 Gen9 Intel® Xeon® E5-4669v4 (2.2GHz/22-core/55MB/135W) Processor
Kit
HPE Synergy 660 Gen9 Intel® Xeon® E5-4667v4 (2.2GHz/18-core/45MB/135W) Processor
Kit
HPE Synergy 660 Gen9 Intel® Xeon® E5-4655v4 (2.5GHz/8-core/30MB/135W) Processor
Kit
HPE Synergy 660 Gen9 Intel® Xeon® E5-4627v4 (2.6GHz/10-core/25MB/135W) Processor
Kit
NOTE: Each processor kit contains 2 processors. All processors within the compute
module must be identical.
NOTE: DDR4 speed is the maximum memory speed of the processor. Actual memory
speed may depend on the quantity and type of DIMMs installed. Please see the see the
"Memory" section later in this document.
HPE Smart Memory
HP 8GB (1x8GB) Single Rank x8 DDR4-2400 CAS-17-17-17 Registered Memory Kit
HP 16GB (1x16GB) Single Rank x4 DDR4-2400 CAS-17-17-17 Registered Memory Kit
HPE 16GB (1x16GB) Dual Rank x4 DDR4-2400 CAS-17-17-17 Registered Memory Kit
HP 32GB (1x32GB) Dual Rank x4 DDR4-2400 CAS-17-17-17 Registered Memory Kit
HPE 32GB (1x32GB) Dual Rank x4 DDR4-2400 CAS-17-17-17 Load Reduced Memory Kit
HPE 64GB (1x64GB) Quad Rank x4 DDR4-2400 CAS-17-17-17 Load Reduced Memory Kit
HPE 128GB (1x128GB) Octal Rank x4 DDR4-2400 CAS-20-18-18 Load Reduced Memory
Kit
NOTE: HPE memory from previous generation servers (DDR3) is not compatible with this
compute module. HPE SmartMemory is required to realize the memory performance
improvements and enhanced functionality listed in this document for Gen9. For additional
information, please see the HPE SmartMemory QuickSpecs at:
https://www.hpe.com/us/en/product-catalog/servers/servermemory/pip.models.server-memory.7281077.html
NOTE: LRDIMM and RDIMM are distinct memory technologies and cannot be mixed within
827209-B21
827210-B21
827211-B21
827212-B21
827213-B21
827214-B21
827215-B21
827216-B21
805347-B21
805349-B21
836220-B21
805351-B21
805353-B21
805358-B21
809208-B21
Page 19
QuickSpecs
HPE Synergy 660 Gen9 Compute Module
Configuration Information- Factory Integrated Models
a compute module.
HPE Drives
NOTE: The HPE Synergy 660 Gen9 compute module supports the HPE hot-plug small
form factor (SFF) SmartDrive carrier for enhanced management and reduced maintenance
errors. HPE drives from generation G7 servers and before are not compatible with the
HPE Synergy 660 Gen9 drive bays.
NOTE: The mixing of standard SAS drives with SAS SSD is supported within the compute
module, but limits the RAID configuration to two separate RAID 0 volumes. Mixing of other
drives types is not supported.
NOTE: HPE drives have either a one year or three year warranty; refer to the specific
drive QuickSpecs for details.
NOTE: For SAS Hard Drives, please see technical specifications at:
https://www.hpe.com/h20195/v2/GetHTML.aspx?docname=c04111744
NOTE: For SATA Hard Drives, please see QuickSpecs at:
https://www.hpe.com/h20195/v2/GetDocument.aspx?docname=c04111725.
NOTE: For Solid State Drives (SSDs), please see Datasheet at:
https://www.hpe.com/h20195/v2/GetPDF.aspx%2F4AA4-7186ENW.pdf
•
•
•
•
HPE Synergy 660 Gen9 Compute Module supports all small form factor (SFF)
SAS and SATA HDDs and SSDs currently certified in HPE Smart Carriers.
For each SFF bay, two uFF drives can be selected.
Any exceptions to this qualification will be listed on this page by drive
description and part number
Drive Qualification Exceptions:
At this time there are no exceptions to list.
HPE Security
HPE Trusted Platform Module Option
HPE Trusted Platform Module 2.0 Kit
NOTE: The TPM (Trusted Platform Module) is a microcontroller chip that can securely
store artifacts used to authenticate the server platform. These artifacts can include
passwords, certificates and encryption keys. Windows® BitLocker™ Drive Encryption
(BitLocker) is a data protection feature available in Windows Server® 2008 R2 and 2012.
BitLocker leverages the enhanced security capabilities of a Trusted Platform Module
(TPM) version 1.2 or 2.0. The TPM works with BitLocker to help protect user data and to
ensure that a server running Windows Server 2008 R2 and 2012 has not been tampered
with while the system was offline.
NOTE: For more information about TPM, including a white paper, go to
http://www8.hp.com/h20195/v2/GetPDF.aspx/c04939549.pdf
NOTE: OS pre-installed units will come with the partition required for TPM deployment.
NOTE: The TPM key is unique to every TPM deployed server and must be retained.
Misplacing or losing the key could result in data loss.
488069-B21
745823-B21
HPE Storage
Controllers
HPE Smart Array P240nr/1GB FBWC 12Gb 1-port Internal SAS Controller
HPE H240nr 12Gb 1-port Internal Smart Host Bus Adapter
HPE Smart Array P542D/2GB FBWC 12Gb Mezzanine SAS Controller
NOTE: Requires one HPE Smart Storage Battery 260mm cable kit (782958-B21).
758801-B21
759553-B21
759557-B21
Upgrade
HPE Smart Storage Battery with 260mm Cable Kit
782958-B21
Page 20
QuickSpecs
HPE Synergy 660 Gen9 Compute Module
Configuration Information- Factory Integrated Models
NOTE: This cable kit is included in P240nr and may be shared with the HPE Smart Array
P542D/2GB controller.
HPE USB and SD
Options
HPE Enterprise Mainstream Flash Media Kits for Memory Cards
HP 8GB USB Enterprise Mainstream Flash Media Drive Key Kit
HPE 8GB microSD Enterprise Mainstream Flash Media Kit
HPE 32GB microSD Mainstream Flash Media Kit
HP Dual 8GB microSD Enterprise Midline USB Kit
NOTE: Please see the QuickSpecs for Technical Specifications and additional information:
https://www.hpe.com/h20195/v2/GetHTML.aspx?docname=c04123175
737953-B21
726116-B21
700139-B21
741279-B21
Page 21
QuickSpecs
HPE Synergy 660 Gen9 Compute Module
Technical Specifications
Memory Subsystem Architecture
Each processor socket contains four memory channels that support three DIMMs each for a total of twelve (12) DIMM per installed
processor or a grand total of forty eight (48) DIMMs for the compute module.
Memory Population Rules and Guidelines:
• A minimum of one DIMM is required per processor.
• Install DIMMs only if the corresponding processor is installed.
• If only one processor is installed in a two processor system, only half of the DIMM slots are available.
• DIMM sizes can be mixed in channel. To maximize performance, it is recommended to balance the total memory capacity
between all installed processors and to load the channels similarly whenever possible.
• LRDIMM and RDIMMs are all distinct memory technologies and cannot be mixed within a compute module.
• DIMMs of different speeds may be mixed in any order; the compute module will select a common optimal speed.
• The maximum memory speed is a function of the memory type, memory configuration, and processor model.
• The maximum memory capacity is a function of the memory type and number of installed processors.
• HPE memory from previous generation servers is not compatible with the HPE Synergy 660 Gen9 Compute Module.
• To realize the performance memory capabilities listed in this document, HPE SmartMemory is required. For additional
information, please see the HPE SmartMemory QuickSpecs at:
https://www.hpe.com/h20195/v2/GetHTML.aspx?docname=c04111535
System Unit
Dimensions
(H x W x D)
(with bezel)
Weight
(approximate)
63.5mm x 430.3mm x 600mm
Maximum: all processors, 48
DIMMs, drives, mezzanine
cards, and one flash cache
battery installed)
Minimum: two processor and
1 DIMM / processor installed
36.0 Lbs
27.8 Lbs
Power Specifications For power specifications including input requirements, BTU rating, and power supply
output, please see the HPE Synergy Frame TechSpecs.
To review typical system power ratings use the HPE Power Advisor which is available
via the online tool located at http://www.hp.com/go/hppoweradvisor
System Inlet
Temperature
Operating
Non-operating
10° to 35°C (50° to 95°F) at sea level with an altitude
derating of 1.0°C per every 305 m (1.8°F per every
1000 ft) above sea level to a maximum of 3050 m
(10,000 ft), no direct sustained sunlight.
Maximum rate of change is 20°C/hr (36°F/hr). The
upper limit and rate of change may be limited by the
type and number of options installed.
System performance during standard operating
support may be reduced if operating with a fan fault
or above 30°C (86°F).
-30° to 60°C (-22° to 140°F). Maximum rate of
change is 20°C/hr (36°F/hr).
Page 22
QuickSpecs
HPE Synergy 660 Gen9 Compute Module
Technical Specifications
Extended Ambient
Operating Support
For approved hardware configurations, the supported system inlet range is extended
to be: 5° to 10°C (41° to 50°F) and 35° to 40°C (95° to 104°F) at sea level with an
altitude derating of 1.0°C per every 175 m (1.8°F per every 574 ft) above 900 m
(2953 ft) to a maximum of 3050 m (10,000 ft).
The approved hardware configurations for this system are listed at the URL:
NOTE: Qualifications for extended ambient configurations are detailed at:
https://www.hpe.com/servers/ASHRAE
Relative Humidity
(non-condensing)
Operating
Non-operating
Altitude
Operating
Non-operating
HPE Smart Array
P240nr Controller
Minimum to be the higher (more moisture) of -12°C
(10.4°F) dew point or 8% relative humidity. Maximum
to be the lower (less moisture) of 24°C (75.2°F) dew
point or 90% relative humidity.
5 to 95% relative humidity (Rh), 38.7°C (101.7°F)
maximum wet bulb temperature, non-condensing.
3050 m (10,000 ft). This value may be limited by the
type and number of options installed. Maximum
allowable altitude change rate is 457 m/min (1500
ft/min).
9144 m (30,000 ft). Maximum allowable altitude
change rate is 457 m/min (1500 ft/min).
Acoustic Noise
For acoustic noise specifications, please see the HPE Synergy 12000 Frame
Specifications.
Disk Drive Interface
12Gb/s SAS (Serial Attached SCSI)
6Gb/s SATA (Serial Advanced Technology Attachment)
x8 5G PCIe 3.0 provides 8GB/s maximum bandwidth
1GB flash backed write cache (FBWC) cache standard
64 (with included 1GB cache)
Server Interface
Cache Memory
Logical Drives
Supported
Host Memory
Addressing
RAID Support
Other
HPE Dynamic
Disk Drive Interface
Smart Array B140i Compute module
Controller
Interface
SAS Connectors
Cache Memory
SAS Speed
Logical Drives
Supported
Host Memory
Addressing
64-bit, supporting servers memory space greater than 4GB
RAID 1 (mirroring), RAID 0 (striping), RAID 5, RAID 10
Upgradeable firmware with recovery ROM
Online drive flash (with SAS drives)
6Gb/s SATA (Serial ATA)
Embedded x4 PCIe 2.0
2 internal SATA ports
None
6Gb/s SATA links
Up to 10 logical volumes (4 physical drives)
64-bit, supporting greater than 4GB compute module memory space
Page 23
QuickSpecs
HPE Synergy 660 Gen9 Compute Module
Technical Specifications
HPE Smart Array
P542D Controller
Hot Plug Support
RAID Support
Other
Yes
RAID 1 (Mirroring), RAID 0 (Striping), RAID 5
Upgradeable firmware with recovery ROM
Storage Interface
12 Gb/s SAS (Serial Attached SCSI)
6 Gb/s SATA (Serial Advanced Technology Attachment)
Two (2) external ports supporting x4 SAS links each and two (2) internal ports
supporting x4 SAS links each
x16 12 Gb/s per physical link
PCIe 3.0 x8 links
DDR3-1866 MHz, 72-bit wide bus at 14.92 GB/s (2 GB cache module)
64 logical drives
SAS Connectors
SAS Speed
PCIe Link Rate
Memory Bus Speed
Logical Drives
Supported
Max Drives
Supported
RAID Support
Upgradeable
Firmware
HPE Smart HBA
Disk Drive Interface
H240nr Controller
Compute module
Interface
Cache Memory
Logical Drives
Supported
Host Memory
Addressing
RAID Support
Other
HPE Synergy
2820C 10Gb
Converged
Network Adapter
Type
Network Processor
Data Transfer
Method
Network Transfer
Rate
IEEE Compliance
Up to 256 drives (Up to 128 drives per logical drive)
RAID 6, 60 (Advanced Data Guarding)
RAID 5, 50 (Distributed Data Guarding)
RAID 1, 10 (Drive Mirroring)
RAID 1 ADM, 10 ADM (Advanced Data Mirroring)
RAID 0 (Striping)
Flashable ROM with redundant firmware images
12Gb/s SAS (Serial Attached SCSI)
6Gb/s SATA (Serial ATA)
x8 5G PCIe 3.0 provides 8GB/s maximum bandwidth
None
64
64-bit, supporting compute modules memory space greater than 4GB
RAID 1 (mirroring) and RAID 0 (striping)
Upgradeable firmware with recovery ROM
Online drive flash (with SAS drives)
Dual-port 10Gb mezzanine
QLogic 57840S with integrated MAC/PHY
x8 PCI Express 3.0
Two ports, each at 20Gbps full duplex; 40Gbps aggregate full duplex theoretical
bandwidth
802.3, 802.3ab, 802.3u, 802.3x, 802.3ad, 802.3p, 802.1q, 802.3ae, 802.3ap
Page 24
QuickSpecs
HPE Synergy 660 Gen9 Compute Module
Technical Specifications
Standard Features
Delivers flexibility to compose multiple network flows including Ethernet and FCoE or
iSCSI within each connection.
Full hardware offload of FCoE and iSCSI storage protocol processing for highest
performance converged Ethernet data and storage networks.
Flex-10 Technology allows you to fine tune bandwidth for up to four partitioned
FlexNIC’s and FlexHBA’s to optimize connectivity for different application needs.
From 100Mb/s to 10Gb/s on up to four "Physical Function" NICs per port, in
increments of 100Mb/s for NIC. The combined bandwidth of NICs cannot exceed
port bandwidth i.e. 10 Gb.
A single Type C mezzanine form factor provides flexible network and storage I/O for
any HPE Synergy Compute Module.
Provides up to 40 Gb/s of converged bi-directional Ethernet bandwidth. Industryleading throughput and latency performance.
Supports Tunnel Offload with NVGRE and VXLAN.
Hardware acceleration and offloads for stateless TCP/IP, TCP Offload Engine (TOE).
Orchestrates reliable adapter firmware updates with an entire HPE Synergy
infrastructure from a single tool, HPE Synergy Composer.
Integrated PHY and MAC.
Support for Preboot eXecution Environment (PXE).
Support for SR-IOV (Windows, Linux, VMware).
Support for Network Partitioning (NPAR) when using Pass-thru modules.
HPE
Synergy 3820C
10/20Gb
Converged
Network Adapter
Type
Network Processor
Data Transfer
Method
Network Transfer
Rate
IEEE Compliance
Standard Features
Dual-port 10/20Gb mezzanine
QLogic 57840S with integrated MAC/PHY
x8 PCI Express 3.0
HPE
Type
Dual-port 16Gb mezzanine
Two ports, each at 40Gbps full duplex; 80Gbps aggregate full duplex theoretical
bandwidth
802.3, 802.3ab, 802.3u, 802.3x, 802.3ad, 802.3p, 802.1q, 802.3ae, 802.3ap
Delivers flexibility to compose multiple network flows including Ethernet and FCoE or
iSCSI within each connection.
Full hardware offload of FCoE and iSCSI storage protocol processing for highest
performance converged Ethernet data and storage networks.
Flex-20 Technology allows you to fine tune bandwidth for up to four partitioned
FlexNIC’s and FlexHBA’s to optimize connectivity for different application needs.
From 100Mb/s to 20Gb/s on up to four "Physical Function" NICs per port, in
increments of 100Mb/s for NIC. The combined bandwidth of NICs cannot exceed
port bandwidth i.e. 20 Gb.
A single Type C mezzanine form factor provides flexible network and storage I/O for
any HPE Synergy Compute Module.
Provides up to 80 Gb/s of converged bi-directional Ethernet bandwidth.
Industry-leading throughput and latency performance.
Supports Tunnel Offload with NVGRE and VXLAN.
Hardware acceleration and offloads for stateless TCP/IP, TCP Offload Engine (TOE).
Orchestrates reliable adapter firmware updates with an entire HPE Synergy
infrastructure from a single tool, HPE Synergy Composer.
Integrated PHY and MAC.
Support for Preboot eXecution Environment (PXE).
Support for SR-IOV (Windows, Linux, VMware).
Support for Network Partitioning (NPAR) when using Pass-thru modules.
Page 25
QuickSpecs
HPE Synergy 660 Gen9 Compute Module
Technical Specifications
Network Processor
Synergy 3830C
16Gb Fibre Channel Data Transfer
Host Bus Adapter Method
Network Transfer
Rate
IEEE Compliance
Standard Features
QLogic 8324
x8 PCI Express 3.0
Two ports, each at 16 Gbps, each direction;
64 Gbps aggregate full duplex theoretical bandwidth
802.3ae, 802.1Q, 802.3x, 802.1p, 802.3ad/LACP, 802.1AB(LLDP), 802.1Qbg,
802.1Qbb, 802.1Qaz, 802.3ap
Flexible Configuration and Connection of Pools of Compute Resources.
• Provides flexible connectivity to HPE Synergy Virtual Connect FC Modules
and Brocade FC Switch Modules.
Performance Optimized:
• Capable of delivering twice the data throughput (MB/s) compared to 8Gb FC
HBAs.
• High link speed combined with larger data block sizes results in improved
application performance.
• Dynamic Port Utilization architecture delivers up to 600K Input Output
Operations per second (IOPS) on each port or up to 1.2 million IOPS with
single port operation.
Virtualization Optimized:
• Ideal for high density server virtualization environments.
• Enables more applications and Virtual Machines to run on a single HPE
Synergy Compute Module and Fibre Channel port, resulting in reduced
cabling and a higher return on IT investment.
Supports QLogic StorFusion(TM) technology designed to enhance diagnostic and
troubleshooting capabilities, quicken SAN deployment, and improve QoS when
connected to Brocade 16Gb FC fabrics.
• Accelerate SAN deployment (FA-PWWN, F-BLD).
• Improve network resiliency and Quality of Service (FEC, CS_CTL).
• Eenhance diagnostics and troubleshooting (Clearlink®, LCB, RDP, FDMI, FC
Ping, FC Traceroute).
Power Optimized:
• Latest generation technology saves power.
• Reduced number of components on each FC HBA reduces overall power
consumption.
RAS Optimized:
• Highest Data Integrity; Overlapping Protection Domains (OPD) extended for
control and data paths.
Security Optimized:
• SAN-level authentication (FC-SP), fabric-level isolation (NPIV and end-toend data integrity (T10).
Management Optimized:
• Provisions and updates all adapters quickly and consistently using the HPE
Synergy template-driven server profiles.
• Orchestrates reliable adapter firmware updates with an entire HPE Synergy
infrastructure from a single too, HPE Synergy Composer.
Fault tolerant HBA Architecture.
Page 26
QuickSpecs
HPE Synergy 660 Gen9 Compute Module
Technical Specifications
Two 16Gb/s Fibre Channel ports.
Multi-Path support for redundant HBAs and paths including Linux driver failover.
RoHS compliance.
QLogic Converge Console management utility for centralized. management and
remote control of distributed HBAs.
Environmentfriendly Products
and Approach
End-of-life
Management and
Recycling
Hewlett Packard Enterprise offers end-of-life HPE product return, trade-in, and
recycling programs in many geographic areas. For trade-in information, please go to:
http://www.hpe.com/info/recycle. To recycle your product, please go to:
http://www.hpe.com/info/recycle or contact your nearest Hewlett Packard
Enterprise sales office. Products returned to Hewlett Packard Enterprise will be
recycled, recovered or disposed of in a responsible manner.
The EU WEEE directive (2002/95/EC) requires manufacturers to provide treatment
information for each product type for use by treatment facilities. This information
(product disassembly instructions) is posted on the Hewlett Packard Enterprise web
site at: http://www.hpe.com/info/recycle. These instructions may be used by
recyclers and other WEEE treatment facilities as well as Hewlett Packard Enterprise
OEM customers who integrate and re-sell Hewlett Packard Enterprise equipment.
Page 27
QuickSpecs
HPE Synergy 660 Gen9 Compute Module
Summary of Changes
Date
Version History
17-Jul-2017 From Version 6 to 7
27-Mar-2017 From Version 5 to 6
28-Nov-2016 From Version 4 to 5
29-Jul-2016 From Version 3 to 4
08-Jul-2016 From Version 2 to 3
20-Jun-2016 From Version 1 to 2
1-Dec-2015
Version 1
Action
Added
Description of Change
SKU added in Configuration Information-Factory Integrated Models and Related
Options sections:
867322-B21
Changed Overview, Standard Features, Configuration Information - Factory Integrated
Models, and Additional Options sections.
Added
New SKUs added in Configuration Information - Factory Integrated Models, and
Additional Options sections:
836220-B21, 809208-B21.
Changed Service and Support section was updated.
Changed QuickSpecs updated.
Removed SKU deleted:
777434-B21
Changed Standard Features, Optional Features, Configuration Information - Factory
Integrated Models, Additional Options, and Technical Specifications were
updated.
Changed Sections in document were updated.
SKUs added to QuickSpecs:
827208-L21, 827209-L21, 827210-L21, 827211-L21, 827212-L21,
827213-L21, 827214-L21, 827215-L21, 827216-L21, 805347-B21,
805349-B21, 805351-B21, 805353-B21, 805358-B21, 794538-B21,
777430-B21, 777434-B21, 758801-B21, 759557-B21, 815173-B21,
Added
782958-B21, 814069-B21, 777452-B21, 827208-B21, 827209-B21,
827210-B21, 827211-B21, 827212-B21, 827213-B21, 827214-B21,
827215-B21, 827216-B21, 488069-B21, 745823-B21, 737953-B21,
726116-B21, 700139-B21, 741279-B21, 836220-B21, 812784-B21,
758959-B22, 784308-B21, 792962-B21, 777454-B21, 759553-B21.
Created
New QuickSpecs
Sign up for updates
© Copyright 2017 Hewlett Packard Enterprise Development LP. The information contained herein is
subject to change without notice. The only warranties for Hewlett Packard Enterprise products and
services are set forth in the express warranty statements accompanying such products and services.
Nothing herein should be construed as constituting an additional warranty. Hewlett Packard Enterprise
shall not be liable for technical or editorial errors or omissions contained herein.
Microsoft and Windows NT are US registered trademarks of Microsoft Corporation.
Intel, the Intel logo, Xeon and Xeon Inside are trademarks of Intel Corporation in the U.S. and other
countries.
For drives, 1GB = 1 billion bytes. Actual formatted capacity is less.
c05172873 - 15419 - North America - V7 - 17-July-2017
Page 28
Download PDF
Similar pages