Simply Connected XAP-1050 WHAT THIS PRODUCT DOES The Luxul Xen™ High Performance Outdoor 802.11n Wireless Bridge with PoE Pass Through (XAP-1050) offers a simple, efficient and affordable method for adding an IP camera or other PoE device to a remote location. In addition to acting as a bridge link, it provides 30W of PoE power to any external PoE-enabled device. When used together with an XAP-1040, it creates a high performance bridge of up to 10km for remote security and other applications. The XAP-1050 is weather resistant to IP-66 standards. It implements Luxul’s exclusive and patented Xen3D™ technology to deliver 4 times the distance covered by traditional Wi-Fi equipment. USE THE XAP-1050 TO: Setup a Superior Pointto-Point Bridge Link Provide 30W of Power to any IP Camera or other PoE Enabled Device Simplify Installation While Minimizing Setup Time and Expense FEATURES Patented Xen3D™ Technology Highest FCC Approved Performance (Effective EIRP 36dBm) 18dB of Receive Gain Optimizes Bridge Link Performance 2.4 GHz IEEE 802.11n Compliant Enhanced Multi-Level Security Single Cable Installation with PoE 30W of PoE Power Available for External PoE Enabled Device Easy Setup through Web-based XenSmart™ User Interface Weather Resistant IP-66 Compliant Enclosure luxul.com LUX-SPEC-XAP-1050 071712400 Luxul Xen™ High Performance Outdoor 802.11n Wireless Bridge Client with 30W PoE Pass Through The Luxul Xen™ High Performance Outdoor 802.11n Wireless Bridge Client with PoE Pass Through (XAP-1050) provides a simple and cost-effective solution for installing an IP camera or other device in a remote location. Designed specifically as a bridge client, it delivers an efficient high data rate link between 2 locations, while also providing 30W of pass through PoE power to any external PoEenabled device. This simplifies the installation of remote IP cameras and other devices, allowing for both data and power to be transferred via a single Ethernet cable. Ideal for use in both residential and commercial outdoor networking and security applications, when used together with an XAP-1040, it creates a high performance bridge of up to 10km. The ruggedly elegant XAP-1050 complies with IP-66 weather resistance standards and can be easily mounted directly on a wall or on a pole with the included mounting bracket. Powered by Luxul’s Xen3D™ Technology, the XAP-1040 enhances data throughput and coverage by as much as 400% over traditional Wi-Fi gear. EXPERIENCE SUPERIOR WI-FI PERFORMANCE WITH XEN3D™ TECHNOLOGY The XAP-1050 represents the most advanced and powerful wireless technology on the market. It combines the benefits of industry standard 802.11n wireless networking with Luxul’s exclusive and patented Xen3D technology. Xen3D enhances the performance of the overall wireless network by increasing the access point coverage area while also enhancing the receive sensitivity between bridge nodes or wireless client devices. This combination ensures a superior Wi-Fi experience that is unmatched by traditional wireless technologies. IMPROVE NETWORK INTEGRITY WHILE SIMPLIFYING INSTALLATION Designed for installation simplicity, the XAP-1050 requires only a single Ethernet cable to deliver both power and data from any 802.3af or legacy POE injector or switch— significantly reducing installation time and complexity. This reduces complexity, costs and time associated with network deployment. HASSLE-FREE SETUP Luxul has designed the XAP-1050 to require only minimal configuration—making setup simple and hassle-free. The XenSmart™ web based interface provides for an easy 3-step setup, with more advanced options available when needed. POE support further simplifies the installation process. For maximum benefit, the XAP-1050 is part of the XenConnect™ product suite and is designed to seamlessly integrate with other Luxul Xen switch and router products.Xen switch and router products. 357 South 670 West | Suite 160 | Lindon, UT 84042 p: 801-822-5450 | f: 801-822-5460 © Copyright 2011 Luxul. All rights reserved. All trademarks and registered trademarks are property of respective holders. Simply Connected XAP-1050 TECHNICAL SPECIFICATIONS Standards Hardware RF Information Available Transmit Power Available Receive Gain Certifications Power 30dBm @ 6~9Mbps / MCS0 29dBm @ 12~18Mbps / MCS1-2 27dBm @ 24~36Mbps / MCS3-4 26dBm @ 48~54Mbps / MCS5-7 2.401 – 2.473GHz (IEEE802.11b): Up to 36dBm EIRP 30dBm @ 1~11Mbps 2.401 – 2.473GHz (IEEE802.11g/n): Up to 18dBm 2.401 – 2.473GHz (IEEE802.11b): Up to 18dBm Temperature Range Operating Humidity Mechanical Weight Warranty: Receive Sensitivity (Typical) Wireless Operation Modes Management and Security IEEE 802.11n IEEE 802.11b/g IEEE 802.3af IP-66 LAN Port: 1 RJ45 10/100 Mbps data and power input 7dBi Circular Polarized Directional Antenna LEDs: All LEDs are internal and not visible with cover in place (Power, WLAN active, LAN link/activity, Bridge mode active). Circular Connector for 48VDC external Power Supply Frequency Band: 2.401 – 2.473GHz Operating Channels: 11 2.401 – 2.473GHz (IEEE802.11g/n): Up to 36dBm EIRP 1 year 2.401 – 2.473GHz (IEEE802.11n): Up to -91dBm 2.401 – 2.473GHz (IEEE802.11g): Up to -92dBm 2.401 – 2.473GHz (IEEE802.11b): Up to -93dBm Point-to Point Wireless Bridge Client XenSmart™ Remote Web-based Management WEP (128 bit) WPA-PSK (TKIP, AES, TKIP&AES) WPA2-PSK (AES) WPA-PSK/WPA2-PSK Auto (TKIP&AES) Web Based Firmware Upgrade QoS: Wireless Multi-Media (WMM) Extensions FCC Part 15, Class B Ethernet POE out: 48VDC/up tp 40W AP Power Consumption: 5W Nominal, 13W Max Operating: -4°F to 131°F (-20°C to 55°C) Storage: -40°F to 158°F (-40°C to 70°C) 5% to 95% (Non-condensing) Dimensions WxHxD: 7.9” (200mm) x 7.5” (190mm) x 3.15” (80mm) Item: 1.2 lbs With Packaging: 2 lbs Package Contents XAP-1050 Wireless Access Point Weather Resistant RJ45 Connector Gland Dual Purpose Mounting Bracket for Wall or Pole IP64 48VDC Power Supply 25’ (7.62m) Power Cable Quick Install Guide Minimum System Requirements Devices Supporting 802.11b, 802.11g or 802.11n Web Browser (Microsoft IE 7.0 and up, Mozilla Firefox 1.0 and up, Safari 1.0 and up, Google Chrome 5.0 and up) CAT5 Ethernet Cable Internet Connection to View Documentation Online All references to speed are for comparison purposes only. Product specifications, size and shape are subject to change without notice, and actual product appearance may differ from that depicted herein. luxul.com LUX-SPEC-XAP-1050 071712400 357 South 670 West | Suite 160 | Lindon, UT 84042 p: 801-822-5450 | f: 801-822-5460 © Copyright 2011 Luxul. All rights reserved. All trademarks and registered trademarks are property of respective holders.