QUICK USER MANUAL
SPK-WFQ10
INDEX
Import Safety Instructions and Precautions
_____________________
Button Description
Connecting to power
Standby Mode
LED Display
Setup – Download the App__________________________________________
Setup – Android Users __________________________________________
Setup – Apple Users ________________________
__________________
Music playback
___________________________________________
Grouping Speakers
_____________________________________
Featured Apps
_________________________________________
Restoring Factory Settings
_________________________________
FAQ
_____________________________________________________
Specifications
_____________________________________________
IMPORTANT SAFETY INSTRUCTIONS AND PRECAUTIONS
- Read all instructions carefully before use.
- Retain manuals for future reference.
- Use this product only in the manner described.
- Only use a water-dampened soft-cloth to clean the surface of this product.
- The following will damage this product: any liquid such as water or moisture, extreme heat; cold;
humidity, dusty or sandy environments.
- Only place this device on stable surfaces and ensure that any attached cables are secure and will not
cause the device to fall.
- If charging is required, it is recommended to thoroughly charge electronic devices for the first time
overnight. Subsequent charges can be as needed. During charging, or extended use, the product may
become warm.
- There are no user serviceable parts in this product.
- Un-authorized attempts to dismantle or repair this product will void product warranty
- Using this device near other electronic devices may cause interference.
1
1
2
2
2
2
3
3
6
8
9
10
11
12
12
QUICK USER MANUAL
SPK-WFQ10
BUTTON DESCRIPTION
TOP
-
Decrease
Mute
volume
BACK
+
Increase DC IN : Socket for
mains power
volume
adapter. Connect
the power
adapter to power
on the system
automatically.
CONNECTING TO POWER
SET ( RESET/ WPS
Mode): Press
briefly to activate
WPS mode; press
and hold for about
5 seconds to
restore the speaker
to factory settings.
LINE-IN: Audio
input, 3.5mm
socket.
PLEASE USE
THE CABLE
SUPPLIED FOR
BEST SOUND
Connect your Wi-Fi speaker to a mains power outlet using the supplied external power supply. This
speaker has no ON OFF switch so it will turn on automatically. Note: Disconnect the power, to turn the
speaker OFF.
STANDBY MODE
The system will enter Standby mode after 15 minutes without any audio signal input.
To exit out of Standby mode, begin playing music from your Phone App or, press the volume UP or DOWN
buttons.
LED DISPLAY
Status
Display
Status
STANDBY
Fade in and Out RED
Standby mode after 15 minutes without any audio signal inputs.
VOL- / +
Flashes
Volume increase/ decrease
LINE-IN
Lights up Orange
Connected via LINE IN (Auxiliary input)
Flashes White
Booting process / Establishing Wi-Fi connection (via WPS mode)
Lights up White
System ready for Wi-Fi connection (AP Mode)
SET
Flashes Green
Reset to Factory default / Firmware updated
MUTE
Flashes Slowly
Mute audio
WI-FI
2
QUICK USER MANUAL
SPK-WFQ10
SETUP
Download the App
Visit the Play Store and download and install the QUALCOMM® ALLPLAY™ JUKEBOX APP and follow the
prompts to connect your speaker.
Android Users
1) Connecting your Device to the Speaker
Turn on the speaker and make sure it is in pairing mode. Using your mobile phone or tablet turn on your
Wi-Fi and view the available Wi-Fi networks. You will then see the speaker (LASER_WFQ10) in the list.
Please select it and press CONNECT. Please note: You will need to wait about 1 minute before the Wi-Fi
speaker appears. The speaker will have 6 characters after the model number. This is the speakers’ unique
MAC (hardware) address
Please note: If you are unsure you are in pairing mode, press and hold the SET button on the back of the
speaker for 5 seconds. This will reset the unit back to factory settings.
3
Qualcomm® AllPlay™ and Qualcomm AllPlay Radio powered by TuneIn are products of Qualcomm Connected Experiences, Inc.
QUICK USER MANUAL
SPK-WFQ10
2) Connecting your speaker to a Wi-Fi network
There are two ways to do this. Either use the SET/WPS Button (Wi-Fi Protected Setup) at the back of the
speaker and your Wi-Fi Router (only suits Routers with this button), or, manually make the connection
using a web browser.
a) WPS Button Method
Place the speaker next to or close by your router and Press the SET (WPS) button on the back of the
speaker and on your Wi-Fi Router. Connection should be automatic but you can refer to the LED
indication chart above is you are unsure, for further setup indicators.
b) Web Browser Method
First, you will then need to manually log onto your speaker. Open a web browser on your device and in the
search bar, enter the following (IP Address) number then press enter:
You will then be prompted to give your
speaker a nick-name Eg Kitchen or
Bedroom. When done, press next.
172.19.42.1
Now select your network via the network
name list and enter your password. Select
connect when finished.
The speaker is now connected to your network. The device will automatically disconnect you from the
speaker and reconnect you with your previous network connection (if you were connected).
4
QUICK USER MANUAL
SPK-WFQ10
Please Note: If your network router does not assign an IP address automatically, switch the DHCP function
to OFF and then enter the IP address manually. Then enter the network key again if required, and click
“CONNECT”.
Please Note: The speaker saves the connection, so you do not need to setup the connection next time it is
switched on. It will connect automatically.
5
QUICK USER MANUAL
SPK-WFQ10
Apple Users
1) Connecting your Device to the Speaker
Turn on the speaker and make sure it is in pairing mode. Using your mobile phone or tablet turn on your
Wi-Fi and view the available Wi-Fi networks. You will then see the speaker (LASER-WFQ10) in the list.
Please select it and press CONNECT.
Please note: You will need to wait about 1 minute before the Wi-Fi speaker appears. The speaker will have
6 characters after the model number. This is the speakers’ unique MAC (hardware) address
Please note: If you are unsure you are in pairing mode, press and hold the SET button on the back of the
speaker for 5 seconds. This will reset the unit back to factory settings.
6
QUICK USER MANUAL
SPK-WFQ10
2) Connecting your speaker to a Wi-Fi network
After pressing connect in the previous screen you will then be automatically redirected to the following
log in page where you will be prompted to give your speaker a nick name. You will also need to select your
Wi-Fi network name from the drop down list and to enter your Wi-Fi password.
The speaker is now connected to your network. The device will automatically disconnect you from the
speaker and reconnect you with your previous network connection (if you were connected).
Please Note: If your network router does not assign an IP address automatically, switch the DHCP function
to OFF and then enter the IP address manually. Then enter the network key again if required, and click
“CONNECT”.
Please Note: The speaker saves the connection, so you do not need to setup the connection next time it is
switched on. It will connect automatically.
7
QUICK USER MANUAL
SPK-WFQ10
MUSIC PLAYBACK
Select the Speaker or Speaker Group
you wish to use for playback
Select the Music you wish to use for playback
To go back to
the ‘Select a
player’ screen,
press this button
Please note: If you are not getting any audio, once the speaker/s are connected to the network, please
allow one 1 minute or so before playback begins.
Music On This Device
Play music that is loaded on your device.
Music On The Network
With your speaker and smart phone (or Wi-Fi enabled playback device) connected to the same network,
select a media server (DLNA server) from which you want to play music and then select the speaker as the
medium (DLNA player) on which the music is to be played.
Note: You can select more than one speaker for the playback. Please refer to the app for details.
Music Services
Play Music via an alternative app. Some apps allow for streaming services for music or radio.
See Featured apps for more information
MULTI CONNECT (via network)
You can connect multiple smart devices (such as smart phones) to the network. By doing this, you can use
and control the playback and volume on any connected device. Each device can choose which music to
play or which music to add on the playlist.
Please note: Each device will need to download the AllPlay Jukebox app and be connected to the network.
8
QUICK USER MANUAL
SPK-WFQ10
DIRECT MODE
Power on the speaker and the speaker will enter Searching Mode.
Or Press the SET (RESET/ WPS MODE) button for 5 seconds in order to switch the speaker to Searching
mode.
Wait about 1-2 minutes and then connect the smart device (phone or tablet) directly to the speaker by
going to available Wi-Fi connection and connecting to “LASER_WFQ10”.
Note: When using direct mode, please remember to switch off the ‘Auto-Login’ and ‘Auto-Join” function on
smartphone, to avoid smartphone trying to connect with a valid network.
AUXILIARY INPUT
Connect an audio device via the AUX port (Auxiliary) on the back of the speaker using a 3.5mm jack cable.
The LED indictor will change to orange.
Note: For best sound reproduction use the audio cable supplied.
Note: The speaker will revert back to the previous Wi-Fi mode when there has been no audio signal after 1
second.
GROUPING SPEAKERS
If you wish to connect speakers together to play the same audio, you can group speakers together.
1 Press the Group button
2 Select the speaker you wish to Group together.
3 Select done when finished.
9
QUICK USER MANUAL
SPK-WFQ10
FEATURED APPS
Spotify
AllPlay Radio
Spotify is the best way to listen to
music on mobile or tablet.
(premium version required for use
with Wi-Fi speaker)
Over 100,000 real radio
stations and more than four
million podcasts from all
over the world
Spotify (Premium accounts only)
From the All Play Jukebox App select Music Services followed by Spotify.
Note: You will need to install the Spotify App to access this feature.
10
QUICK USER MANUAL
The Spotify App will then open to the
CONNECT screen. Then select your
Wi-Fi Speaker for music playback.
SPK-WFQ10
The Spotify music playback screen will
then open where you can playback
your music.
Premium
account
holders only
Please note: The speaker icon at the bottom right of the screen will be coloured
GREEN (premium accounts only) to indicate your speaker is connected to the
Spotify App for Wi-Fi music playback.
Please note: To reconnect and disconnect playback from the Wi-Fi speaker,
simply press this speaker icon.
RESTORING FACTORY SETTINGS
To reset the device back to default factory settings, press and hold the SET button for 5 seconds. The LED
indicator will then change to GREEN, then to solid WHITE to indicate that the speaker is now ready to
connect to a network.
Note: This process may take up to 1-2 minutes to fully reset.
11
QUICK USER MANUAL
SPK-WFQ10
FAQ
I’m not getting any audio. How do I fix this?
Please reset the speaker/s by: press and hold the SET
button on the back on the speaker for 5 seconds.
I can’t see the speaker under my Wi-Fi. Why?
Please make sure the speaker is in “Searching” mode. It
may take 1 to 2 minutes before you can see the speaker
in the Wi-Fi list.
Using Auxiliary, I don’t get any audio.
Please reset the speaker first by: press and hold the SET
button on the back on the speaker for 5 seconds.
My speaker has a flashing red light. What is
this?
The speaker is the “Standby” mode. Press the volume +
or – to “wake up” the speaker.
Do you have any further product videos on this
product to help me better understand some of
the features?
Yes. Search for Laser Product Support on YouTube or
click the link below:
www.youtube.com/channel/UCB_-v8XFr_Pre_3HJLgj_lw
SPECIFICATIONS
Dimensions
250 x 140 x 130 mm
Channels
2.0
Power Rating
20 Watts
Speakers
2 x Full Range Drivers
Multi Speaker (Capability)
Up to ten speakers
Wi-Fi Frequency
5Ghz / 2.4Ghz
Hub/Bridge
Not Required
Weight
1.55kg
App Support
iOS / Android
Wi-Fi Connect via App
WPS / Webpage
12
QUICK USER MANUAL
SPK-WFQ10
LASER CORPORATION HOLDINGS PTY LTD
LICENSE AGREEMENT (EULA)
READ THE TERMS OF THIS LICENSE AGREEMENT AND LIMITED WARRANTY ("AGREEMENT") GOVERNING THE USE OF THE
SOFTWARE AND RELATED FIRMWARE AND DOCUMENTATION (COLLECTIVELY, THE "SOFTWARE"} PROVIDED TO YOU BY LASER
CORPORATION HOLDINGS PTY LTD ("LASER") CAREFULLY BEFORE BUYING THE APPLICABLE LASER CORPORATION HOLDINGS PTY
LTD PRODUCT (SUCH HARDWARE, TOGETHER WITH THE SOFTWARE, REFERRED TO AS THE "PRODUCT").
BY PURCHASING THE PRODUCT, YOU ARE (1) REPRESENTING THAT YOU ARE OVER THE AGE OF 18, (2) REPRESENTING THAT YOU
HAVE THE RIGHT AND AUTHORITY TO LEGALLY BIND YOURSELF OR YOUR COMPANY, AS APPLICABLE, AND (3} CONSENTING TO BE
LEGALLY BOUND BY ALL OF THE TERMS OF THIS AGREEMENT. IF YOU DO NOT AGREE TO ALL THESE TERMS OR CANNOT
MAKE SUCH REPRESENTATIONS, DO NOT PURCHASE THE PRODUCT.
1.
GRANT OF LICENSE
(a) Subject to the terms and conditions of this Agreement, LASER CORPORATION HOLDINGS PTY LTD grants to You a
worldwide , non- exclusive, non­ transferable, personal license (without the right to sub-license) to (i} use the Software as
embedded in the Product for the purpose of operating the Product, and (ii) use the desktop application portion(s} of the
Software on any personal computer owned or controlled by You during the Term. You may not transfer the Software to any other
computing device or otherwise remove the Software from the Product. Notwithstanding any license granted herein by LASER
CORPORATION HOLDINGS PTY LTD, You acknowledge and agree that it is Your sole responsibility to comply with U.S. and
international copyright laws with respect to Your use of the Software.
(b) You agree not to copy, modify, reverse engineer, decompile or disassemble the Product to the extent that such restriction is
not prohibited by law. Except for the limited license granted herein, LASER CORPORATION HOLDINGS PTY LTD and its suppliers
hereby retain all right, title and interest in and to all worldwide intellectual property rights embodied in the Software. All other
rights are reserved by LASER CORPORATION HOLDINGS PTY LTD. You acknowledge and agree that the technology embedded in
and used to create the Product constitute the valuable trade secrets and know-how of LASER CORPORATION HOLDINGS PTY LTD,
and to the extent you discover any such trade secrets, You will not disclose them to any third party.
(c) LASER CORPORATION HOLDINGS PTY LTD shall have no obligation to provide any updates or upgrades to the Product, but in
the event that it does, such updates, upgrades and any documentation shall be deemed the "Product", and shall be subject to the
terms and conditions of this Agreement.
2.
TERM OF AGREEMENT
(a) You may terminate this Agreement at any time by notifying LASER CORPORATION HOLDINGS PTY LTD, discontinuing use of
the Product and purging the Software from Your computing device.
(b) This Agreement will automatically terminate if You violate any of its terms.
(c) Sections 1(b), 3, 4, 6(c), 7 and 9 shall survive termination or expiration for any reason.
3.
COMPLIANCE WITH COPYRIGHT LAWS
LASER CORPORATION HOLDINGS PTY LTD complies with U.S. and international copyright laws and in consideration of the licenses
granted herein, You agree to do the same. You acknowledge that unauthorized copying or distribution of music or other content
accessed using the Product ("Content") is prohibited by such copyright laws, and You agree that You will not, directly or indirectly,
copy or distribute any Content without the express written authorization of the copyright holder. You agree to indemnify and
hold harmless LASER CORPORATION HOLDINGS PTY LTD and its licensors from and against any and all claims, suits, losses,
damages, liabilities, costs and expenses incurred by LASER CORPORATION HOLDINGS PTY LTD or its licensors arising out of or
related to Your failure to comply with the terms of this Section 3.
4.
THIRD PARTY CONTENT AND TECHNOLOGIES SUPPORT
From time to time, LASER CORPORATION HOLDINGS PTY LTD may provide access to third party content providers via the Product.
In addition, LASER CORPORATION HOLDINGS PTY LTD may support certain third party technologies, such as specific file formats
or codecs. LASER CORPORATION HOLDINGS PTY LTD reserves the right to discontinue access to and/or support for such third
party content or technologies at any time, and for any reason. LASER CORPORATION HOLDINGS PTY LTD makes no
representations or warranties whatsoever regarding the selection of, or continuing support for, any such third party content or
technologies.
6.
INFRINGEMENT INDEMNITY
(a) Indemnity. LASER CORPORATION HOLDINGS PTY LTD shall defend or settle any claim, demand, suit, proceeding or action
("Claim") against You to the extent that such Claim is based on an allegation that any portion of the Product, as furnished to You
under this Agreement and used as authorized in this Agreement , infringes any third party's copyright or misappropriates such
third party's trade secrets, provided that You: (i) give prompt written notice of the Claim to LASER CORPORATION HOLDINGS PTY
LTD; (ii) give LASER CORPORATION HOLDINGS PTY LTD the exclusive authority to control and direct the defense or settlement of
such Claim; and (iii) give LASER CORPORATION HOLDINGS PTY LTD, at LASER CORPORATION HOLDINGS PTY LTD' expense (except
for the value
of Your time), all necessary information and assistance with respect to the Claim. LASER CORPORATION HOLDINGS PTY LTD shall
pay all settlement amounts, damages and costs finally awarded to the extent attributable to such Claim. You may participate in
13
QUICK USER MANUAL
SPK-WFQ10
the defense of Claim at Your expense. LASER CORPORATION HOLDINGS PTY LTD will not be liable for any costs or expenses
incurred without its prior written authorization.
(b) Limit on Indemnity. The foregoing notwithstanding, LASER CORPORATION HOLDINGS PTY LTD shall have no liability for a
Claim to the extent based on: (i) the use by You of any Product more than thirty (30) days after LASER CORPORATION HOLDINGS
PTY LTD notifies You in writing that continued use of the Product may give rise to such Action and offers , in return for You ceasing
all further use of the Product, to refund the price paid by You for the Product less amounts attributable to Your prior use; (ii)
the combination of the Product, or any part thereof, with other hardware or products not provided by LASER CORPORATION
HOLDINGS PTY LTD, which Claim would have been avoided if the Products had not been so combined; or (iii) use of the Products
other than as authorized under this Agreement.
(c) Entire Liability. THE FOREGOING PROVISIONS OF THIS SECTION 6 STATE THE ENTIRE LIABILITY AND OBLIGATIONS OF LASER
CORPORATION HOLDINGS PTY LTD,AND YOUR EXCLUSIVE REMEDY, WITH RESPECT TO ANY ACTUAL OR ALLEGED INFRINGEMENT
OF OR MISAPPROPRIATION OF ANY INTELLECTUAL PROPERTY RIGHT BY THE PRODUCT.
Warranty Against Defects
Laser Corporation Pty Ltd (“Laser”) warrants your new product to be free from defects in materials and
workmanship for 12 months, from the date of purchase, provided that the product is used in accordance with
accompanying recommendations or instructions where provided. The benefit of this warranty is in addition to your
rights under the Australian Consumer Law and to other rights and remedies of the consumer under a law in relation
to the goods or services to which the warranty relates.
Through a network of retailers and resellers, Laser will provide you with your choice of a repair, exchange (where
possible) or refund (within Dead on Arrival period) for this product if it becomes defective within the warranty
period.
This warranty will no longer apply where the defect is a result of alteration, accident, misuse, abuse, normal wear
and tear, neglect or improper storage. Please retain your receipt as proof of purchase
How to make a product warranty claim:
Step 1:
Find your receipt which proves the date of purchase. Where the date of purchase cannot be verified,
your place of purchase or Laser will make an assessment based on the date of manufacture, the condition of the
Laser Product and the type of defect.
Step 2a): Contact your place of purchase. They will assess the nature of the fault and repair, replace or fund the
product as per their store refund or warranty policy.
Step 2b): If your place of purchase cannot be contacted, then you can contact Laser. Customer Service with
details of your defective Laser Product: Phone: (02) 9870 3388; or Email: support@laserco.com.au or online
www.laserco.com.au/warranty (click on “Consumers (End Users)”). Our business address is at 1/6-8 Byfield Street,
North Ryde, NSW 2113
Step 3:
Laser will issue you with a Return Authorisation (RA) number within 48 hours. When requested, send us
the defective Product and a copy of your receipt. Laser will cover the cost of the return delivery.
Step 4:
Wait for us to contact you. Once we have received your defective Laser Product for inspection, we will
inform you of our assessment of your claim within 7 days. When we contact you, we will firstly let you know
whether you have a valid claim under this Warranty, and if so, we will inform you whether your defective Laser
Product will be replaced or repaired, together with the number of days you can expect to wait to receive your
replaced or repaired Laser Product.
Step 5: For further details on warranty cover and returns, please check Terms and Conditions for Warranty Returns
section on http://www.laserco.com.au/warranty
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to
a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage.
You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure.
Qualcomm is a trademark of Qualcomm Incorporated, registered in the United States, and other countries and used with permission. AllPlay is a
trademark of Qualcomm Connected Experiences, Inc., registered in the United States and used with permission. TuneIn is a trademark of TuneIn
Inc., registered in the United States and other countries and used with permission.
14
Download PDF
Similar pages