USER MANUAL
Emerald Series LED HDTV
EM40NF5 40” Class
EM43NF5 43” Class
EM50NF5 50” Class
EM55NF5 55” Class
EM40RF5 40” Class
EM43RF5 43” Class
EM50RF5 50” Class
EM55RF5 55” Class
Before operating your LED TV, please read this manual thoroughly.
(*Images shown in this user manual are for illustration purpose only.)
Rev. 1/15
1
2
Contents
Congratulations on purchasing your new JVC TV. To get the most out of your JVC LED TV, read these
instructions before making any adjustments, and retain them for future reference.
For assistance, call the JVC Customer Support and Service Center 1-855-868-1928 or visit our website:
http://jvc-tv.com/support
We recommend that you register your JVC LED TV either at our website: http://jvc-tv.com/support or fill
out and mail the Product Registration Card on the back of the manual.
Retain your purchase receipt and write down the model and serial number located at the back of your
LED TV for easy reference when obtaining service support.
Serial Number:
Model Number:
MHL, Mobile High-Definition Link and the MHL Logo are
trademarks or registered trademarks of the MHL, LLC.
This product qualifies for ENERGY STAR in the “factory default” setting
and this is the setting in which power savings will be achieved.
Changing the factory default picture setting or enabling other
features will increase power consumption that could exceed the
limits necessary to qualify for Energy Star rating.
The terms HDMI and HDMI High-Definition Multimedia Interface,
and the HDMI Logo are trademarks or registered trademarks of
HDMI Licensing LLC in the United States and other countries.
Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of
Dolby Laboratories.
THE TRADEMARKS SHOWN HEREIN ARE THE PROPERTY OF THEIR RESPECTIVE OWNERS;
IMAGES USED ARE FOR ILLUSTRATION PURPOSES ONLY. JVC, THE JVC LOGO, AND OTHER
JVC TRADEMARKS ARE THE INTELLECTUAL PROPERTY OF JVC KENWOOD Corporation.
PRODUCT SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.
Copyrights © 2015 AmTRAN Video Corporation. ALL RIGHTS RESERVED.
3
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: To Reduce The Risk Of Electric Shock, Do Not Remove Cover (Or Back). No User-Serviceable Parts
Inside. Refer Servicing To Qualified Service Personnel.
The lightning flash with arrowhead symbol, within
an equilateral triangle is intended to alert the user
to the presence of uninsulated dangerous voltage
within the product’s enclosure that may be of
sufficient magnitude to constitute a risk of electric
shock.
The exclamation point within an equilateral
triangle is intended to alert the user to
the presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
WARNING: T O PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO
RAIN OR MOISTURE. TO PREVENT THE SPREAD OF FIRE, KEEP CANDLES OR OPEN FLAMES AWAY
FROM THIS PRODUCT AT TIMES.
CAUTION: TO PREVENT ELECTRIC SHOCK. DO NOT USE THIS POLARIZED PLUG WITH AN
EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY
INSERTED TO PREVENT BLADE EXPOSURE.
WARNING: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
this device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Note: This equipment has been tested and
found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one of the following measures: - Reorient
or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect
the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult
the dealer or an experienced radio/TV technician for help. FCC Caution: To assure continued compliance,
(example – use only shielded interface cables when connecting to computer or peripheral devices). Any
changes or modifications not expressly approved by the party responsible for compliance could void the
user’s authority to operate this equipment.
Responsible Party: AmTRAN Video Corporation
Address: 9 Goddard, Irvine, CA 92618 USA
Telephone No: 1-855-868-1926
CAUTION: Changes or modifications not expressly approved by the party responsible for compliance with the FCC Rules
could void the user’s authority to operate this equipment.
Location of the required Marking
The rating sheet and the safety caution are on the rear of the unit.
4
Important Safety Instructions
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in accordance with manufacturer’s instructions.
8)Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
9)Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two
blades with one wider than the other. A grounding-type plug has two blades and a third grounding
prong. The wide blade or the third prong are provided for your safety. If the provided plug does not
fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10)Protect the power cord from being walked on or pinched, particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.
11) Only use attachments/accessories specified by the manufacturer.
12)Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer,
or sold with the apparatus. When a cart is used, use caution when moving the cart/
apparatus combination to avoid injury from tip-over.
13)Unplug this apparatus during lightning storms or when unused for long periods of time.
14)Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or
objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
15)Apparatus should not be exposed to dripping or splashing, and objects filled with liquids, such as
vases, should not be placed on the apparatus.
16)An outside antenna system should not be located in the vicinity of overhead power lines or other
electric light or power circuits, or where it can fall into such power lines or circuits. When installing
an outside antenna system, extreme care should be taken to keep from touching such power lines
or circuits, as contact with them might be fatal.
17)Do not overload wall outlets and extension cords, as this can result in a risk of fire or electric shock.
18)Do not push objects through any openings in this unit, as they may touch dangerous voltage points
or short out parts that could result in fire or electric shock. Never spill or spray any type of liquid into
the unit.
19)If an outside antenna or cable system is connected to the unit, be sure the antenna or cable system
is grounded to provide some protection against voltage surges and built-up static charges, Section
810 of the National Electrical Code, ANSI/NFPA 70, provides information with respect to proper
grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna
discharge unit, size of grounding conductors, location of antenna discharge unit, connection to
grounding electrodes, and requirements for the grounding electrode.
20)When replacement parts are required, be sure the service technician uses replacement parts
specified by the manufacturer or those that have the same characteristics as the original part.
Unauthorized substitutions may result in fire, electric shock or other hazards.
21)Upon completion of any service or repairs to this unit, ask the service technician to perform safety
checks to determine that the unit is in proper operating condition.
5
Important Safety Instructions
22)When you connect the product to other equipment, turn off the power and unplug all of the
equipment from the wall outlet. Failure to do so may cause an electric shock and serious personal
injury. Read the owner’s manual of the other equipment carefully and follow the instructions when
making any connections.
23)Sudden high volume sound may cause hearing or speaker damage. When you use headphones,
(if the unit is equipped with a headphone jack) keep the volume at a moderate level. If you use
headphones continuously with high volume sound, it may cause hearing damage.
24)Do not allow the product to output distorted sound for an extended period of time. It may cause
speaker overheating and fire.
25)This reminder is provided to call the cable TV system installer’s attention to Article 820-40 of the
NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground
shall be connected to the grounding system of the building, as close to the point of cable entry as
practical.
26)The socket-outlet must be installed near the unit and easily accessible.
CHILD SAFETY:
It Makes A Difference How and Where You Use TV
Congratulations on your purchase! As you enjoy your new product, please keep these safety tips in mind:
THE ISSUE
The home theater entertainment experience is a growing trend and larger TVs are popular purchases. However, TVs are not
always supported on the proper stands or installed according to the manufacturer’s recommendations.
TVs that are inappropriately situated on dressers, bookcases, shelves, desks, speakers, chests or carts may fall over and
cause injury.
THIS MANUFACTURER CARES!
The consumer electronics industry is committed to making home entertainment enjoyable and safe.
TUNE INTO SAFETY
One size does NOT fit all. Follow the manufacturer’s recommendations for the safe installation and use of your TV.
Carefully read and understand all enclosed instructions for proper use of this product.
Don’t allow children to climb on or play with furniture and television sets.
Don’t place TVs on furniture that can easily be used as steps, such as a chest of drawers.
Remember that children can become excited while watching a program, especially on a “larger than life” TV. Care should be
taken to place or install the display where it cannot be pushed, pulled over, or knocked down.
Care should be taken to route all cords and cables connected to the TV so that they cannot be pulled or grabbed by curious
children.
6
Important Safety Instructions
CONDENSATION
Moisture will form in the operating section of the unit if the unit is brought from cool surroundings into
a warm room or if the temperature of the room rises suddenly. When this happens, unit’s performance
will be impaired. To prevent this, let the unit stand in its new surroundings for about an hour before
switching it on, or make sure that the room temperature rises gradually. Condensation may also form
during the summer if the unit is exposed to the breeze from an air conditioner. In such cases, change the
location of the unit.
HOW TO HANDLE THE LED PANEL
• Do not press hard or jolt the LED panel. It may cause the LED panel glass to break and injury may
occur.
• If the LED panel is broken, make absolutely sure that you do not touch the liquid in the panel. This
may cause skin inflammation.
• If the liquid gets in your mouth, immediately gargle and consult with your doctor. Also if the liquid
gets in your eyes or touches your skin, consult with your doctor after rinsing for at least 15 minutes or
longer in clean water.
Possible Adverse Effects on LED Panel:
If a fixed (non-moving) pattern remains on the LED Panel for long periods of time, the image can become
permanently ingrained in the LED Panel and cause subtle but permanent ghost images. This type of
damage is NOT COVERED BY YOUR WARRANTY. Never leave your TV on for long periods of time while it is
displaying the following formats or images:
• Fixed Images, such as stock tickers, video game patterns, TV station logos, and website.
• Special Formats that do not use the entire screen. For example, viewing letterbox style (16:9) media on
a normal (4:3) display (black bars at top and bottom of screen); or viewing normal style (4:3) media on
a widescreen (16:9) display (black bars on left and right sides of screen).
The following symptoms are not signs of malfunction but technical limitation.
• L ED Panels are manufactured using an extremely high level of precision technology, however
sometimes parts of the screen may be missing picture elements or have luminous spots. This is not a
sign of a malfunction.
•D
o not install the TV near electronic equipment that produces electromagnetic waves. Some
equipment placed too near this unit may cause interference.
• E ffect on infrared devices – There may be interference while using infrared devices such as infrared
cordless headphones.
7
Important Safety Instructions
Television Antenna Connection Protection
External Television Antenna Grounding
If an outside antenna/satellite dish or cable system is to be connected to the TV, make sure that the
antenna or cable system is electrically grounded to provide some protection against voltage surges and
static charges.
Article 810 of the National Electrical Code, ANSI/NFPSA 70, provides information with regard to proper
grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge
unit, size of the grounding conductors, location of antenna discharge unit, connection to grounding
electrodes, and requirements of the grounding electrode.
ANTENNA LEAD IN WIRE
GROUND CLAMP
ANTENNA DISCHARGE UNIT
(NEC SECTION 810-20)
ELECTRIC SERVICE
EQUIPMENT
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
Lightning Protection
For added protection of the TV during a lightning storm or when it is left unattended or unused for long
periods of time, unplug the TV from the wall outlet and disconnect the antenna or cable system.
Power Lines
Do not mount the antenna near overhead light or power circuits, or where it could fall into such power
lines or circuits.
8
Important Safety Instructions
DTV Transition Advisory
As of June 12, 2009, all U.S. television stations have switched to digital broadcasting. As a result, owners
of analog television sets must connect a digital-to-analog converter box to the television set or subscribe
to cable or satellite TV to receive over-the-air TV. Analog-only TVs continue to work as before to receive
low power, Class A or translator television stations and with cable and satellite TV services, gaming
consoles, VCRs, DVD players, and similar products.
For more information about the DTV transition, visit www.dtv.gov.
FCC’s Consumer Center
Email: dtvinfo@fcc.gov
Phone: 1-888-CALL-FCC (1-888-225-5322)
Fax: 1-866-418-0232; or writing to:
Mail: Federal Communications Commission
Consumer and Governmental Affairs Bureau
Consumer Inquiries and Complaints Division
445 12th Street, SW
Washington, DC 20554
9
Attaching the Stand
The stand installation varies depending on
model. Perform the installation according to the
instructions of your TV model.
Unpacking the TV
1 R emove TV accessories and protective foam.
2 R emove TV from the box and place it on a flat
and clean surface with TV screen facing down.
3 A ttach the stand to TV using the provided screw.
EM40NF5
EM40RF5
EM43NF5
EM43RF5
EM50NF5
EM50RF5
EM55NF5
EM55RF5
10
Removing the Stand
When the TV needs to be transported, remove the
stand and pack the TV back in the carton.
To remove the stand, perform the assemble steps
in reverse order according to your TV model.
Package Contents
Check if the following items are included in your package.
Remote Control
LED TV
Quick Start Guide
Batteries
Power Cord
Quick
GuideStart
DOWNLOAD FULL VERSION USER MANUAL
http://jvc-tv.com/support
Remote Control Batteries
1 Push the tab, then lift to open the cover.
3 Close the battery cover.
2 Insert the batteries, making sure the [+] and [-]
polarities are correct.
Battery Precautions:
Be sure to follow the correct polarity. Incorrect installation
may cause battery leakage or damage the remote control.
Always replace batteries in pair. Do not combine a used
battery with a new one.
Do not use different battery types together
(e.g. “Alkaline” and “Carbon-zinc”).
If the remote control is not to be used for a long period of
time, remove the batteries to prevent battery leakage.
11
Parts and Functions
EM40NF5
EM40RF5
Front View
Power indicator
Remote control IR receiver
EM40NF5
EM40RF5
Rear View
USB
HDMI/MHL
Digital Optical
Output
Audio Out
Power Button
AC Power
12
HDMI-1/
ARC
Component/
Video Input
Audio Input/
Music Port
Antenna
Input
Parts and Functions
EM43NF5
EM43RF5
Front View
Power indicator
Remote control IR receiver
EM43NF5
EM43RF5
Rear View
USB
HDMI/MHL
Digital Optical
Output
Audio Out
Power and
Function Buttons
AC Power
13
HDMI-1/
ARC
HDMI-2
Component/
Video Input
Audio Input/
Music Port
Antenna
Input
Parts and Functions
Front View
EM50NF5
EM50RF5
Power indicator
Remote control IR receiver
Rear View
EM50NF5
EM50RF5
USB
HDMI/MHL
Digital Optical
Output
Audio Out
Power and
Function Buttons
AC Power
14
HDMI-1/
ARC
HDMI-1
HDMI-2
Component/
Video Input
Audio Input/
Music Port
Antenna
Input
Parts and Functions
Front View
EM55NF5
EM55RF5
Power indicator
Remote control IR receiver
Rear View
EM55NF5
EM55RF5
USB
HDMI/MHL
Digital Optical
Output
Audio Out
Power and
Function Buttons
AC Power
15
HDMI-1/
ARC
HDMI-1
HDMI-2
Component/
Video Input
Audio Input/
Music Port
Antenna
Input
Parts and Functions
Remote Control (EMxxNF5 Models)
1 I R Transmitter: Sends remote control signal to
the TV.
2 Remote Control LED: Lights red when a button
is pressed.
3P
layback controls: The buttons are used for
Photo, Music, Video, HDMI CEC function.
1
9
2
3
4 BACK: Go back to previous selection.
4
5 INPUT button: Changes the input source.
6 MUTE button: Turns the TV audio off or on.
10
5
7V
OL (Volume) buttons: Press VOL [+] to
increase volume or VOL [-] to decrease volume.
11
12
13
14
8N
umber pad (0~9, –): Use the number keys to
directly change channel.
15
9 POWER button: Turns the TV on or off.
10 MEDIA button: Enters USB media mode.
6
11 I NFO button: Displays program information
(if available).
7
16
12 MENU button: Displays the MENU screen.
13 A
UDIO button: Enters Audio Only mode and
turns the screen off.
14 D
irectional buttons / / / : Navigates
the menu, selects options, or adjusts setting values.
8
15 OK button: Enters a menu or confirms an option.
16 C
H (Channel) buttons: Use CH
to
increase the channel number or CH
to decrease
the channel number.
17
17 LAST button: Return to previous channel.
Notes: To obtain best results, use the remote control with
a proper distance from the TV and ensure that there are no
obstacles between them.
Aim the remote control transmitter to the remote control
sensor on the TV.
Do not expose the remote control to direct sunlight. This
may affect the performance of the remote control.
16
Parts and Functions
Remote Control (EMxxRF5 Models)
1 I R Transmitter: Sends remote control signal to
the TV.
2 Remote Control LED: Lights red when a button
is pressed.
3*
*Playback controls: The buttons are used for
Photo, Music, Video, HDMI CEC function.
4 **
1
9
2
3
: Go back to previous selection.
4
5 I NPUT button: Changes the input source.
6M
UTE button: Turns the TV audio off or on.
10
5
7V
OL (Volume) buttons: Press VOL [+] to
increase volume or VOL [-] to decrease volume.
11
12
13
14
8N
umber pad (0~9, –): Use the number keys to
directly change channel.
15
9P
OWER button: Turns the TV on or off.
10 *
*ROKU home button: Enter Roku home
page.
6
11 *
*INFO* button: Enter Roku special options.
7
16
12 M
ENU button: Displays the MENU screen.
13 A
UDIO button: Enters Audio Only mode and
turns the screen off.
14 D
irectional buttons / / / : Navigates
the menu, selects options, or adjusts setting values.
8
15 O
K button: Enters a menu or confirms an option.
16 C
H (Channel) buttons: Use CH
to
increase the channel number or CH
to decrease
the channel number.
17 **
17
button: Return to previous channel.
**Compatible with Roku® Streaming Stick™
Notes: To obtain best results, use the remote control with
a proper distance from the TV and ensure that there are no
obstacles between them.
Aim the remote control transmitter to the remote control
sensor on the TV.
Do not expose the remote control to direct sunlight. This
may affect the performance of the remote control.
17
Making Connections
Connecting Antenna / Cable
Connect the 75 ohm coaxial cable directly to the DTV/TV Cable/Antenna jack of the TV.
DTV / TV
CABLE / ANTENNA
75 ohm coaxial cable
Connecting HD Devices
You can connect different devices to the TV using HDMI, Composite, or Component connections.
Check the type of connection available on your device.
18
Making Connections
Connecting External Speakers / Soundbar / AV Receivers
Digital Connection
Connect the SPDIF/Optical audio cable to the Audio OUT optical port of the TV and the optical port of
the soundbar, AV receiver, or audio system.
Digital Audio System
TV
AUDIO OUT
Audio OUT
Audio IN
OPTICAL
OPTICAL
Optical audio cable
Note: The optical audio cable is not included with the TV.
Analog Audio Connection
The TV supports music playback from portable music players, such as an MP3 player or iPod™.
19
Basic Operations
Setup Wizard
3 Select Time Zone, then press OK.
The Setup Wizard will assist you with setting
up your TV for the first time. Please follow the
instructions carefully.
Time Zone
Select the Time Zone
Note: If you would like to setup over-the-air or cable
programming, make sure the antenna or cable TV system
is connected.
Alaska
Time Zone:
1 When you turn on the TV for the first time, the
Setup Wizard screen will appear.
Select the menu language, then press OK.
Change
OK Select
RETURN Previous Step
INFO Exit
4 Set Daylight Saving Time “ON” or “OFF”, then
press OK.
Menu Language
Language Selection
Language:
Daylight Saving
English
Daylight Saving Selection
Daylight Saving:
Change
OK Select
On
INFO Exit
2Select the TV Mode, then press OK.
Change
TV Mode options:
Retail Mode: Select this mode for in store
demo.
Home Mode: Select this mode for in
home mode.
OK Select
RETURN Previous Step
INFO Exit
5 Select the TV service, then press OK.
Auto Scan
Select the Signal Type of your TV input
and start auto scan.
TV Mode
Signal Type:
Cable
Mode Selection
Start Scan
Retail Mode
Mode:
Move
Change
OK Select
RETURN Previous Step
Note: Retail Mode is for retailers only.
To exit Retail Mode, see page 18.
20
INFO Exit
Change
OK Select
RETURN Previous Step
INFO Exit
Basic Operations
Exit Retail Mode
6 Press OK to start channel scan.
1 Press BACK OR
Scanning
.
2 Select OK then press OK to confirm.
Channel scan in progress, if you want to stop
scanning, please press “Stop Scan”.
Scan Status:
2%
Do you wish to exit Retail Mode?
Analog Channel:
0
Digital Channel:
0
OK
Stop Scan
Cancel
OK Select
Note: Scanning may take some time to complete.
Select Stop Scan to cancel the auto scan at any time.
7 When auto scan is complete, press OK to
continue.
Basic TV Operation
One button operation (only for EM40NF5 & EM40RF5)
The TV power button also serves as multi-function
button for input select, TV channel and volume
control.
Scan Finish
• Press the button to show Quick Control Menu and
switch between options
• Press and hold the button to select highlighted
option
• To power off TV, press and hold the button while
Quick Control Menu is not on screen
Channel scan completed.
Analog Channels:
12
Digital Channels:
26
OK
OK Select
RETURN Previous Step
INFO Exit
8 Press OK to complete setup.
Finish
TV
Video
Initial Setup has finished, please press “OK” to
exit Setup Wizard.
component
HDMI-1
OK
HDMI / MHL
OK Select
RETURN Previous Step
INFO Exit
Music
Channel
Volume
21
8
Basic Operations
Changing Channel
Mute Volume
Press the number buttons to directly select
channels.
Press MUTE to turn the sound off. To turn the
sound back on, press MUTE again or any of the
VOL buttons.
Note: After pressing the number buttons, there will be
a few seconds delay before the TV changes channel. To
change to the channel right away, press OK after pressing
the number buttons.
To Browse Channel
Press the Channel
/
control.
CH
buttons on the remote
Set Sleep Timer
Sleep timer sets the TV to automatically turn off
after a preset amount of time. After setting a preset
amount of time, the TV will automatically turn off
after the timer has expired.
1 P ress MENU and select sleep to display the
Press to scroll through the
channels manually.
sleep screen.
2 P ress
or
press OK.
to scroll through the options, then
To cancel sleep, set the timer Off.
To Select Analog Channels
1~9Press 1~9 as needed.
Example, to select channel 2,
press 2, then press OK.
10~99Press the 2 digits in order.
Example, to select channel 15,
press 1, 5, then OK.
100~135:Press the 3 digits in order,
Example, to select channel 130,
press 1, 3, 0, then press OK.
To Select Digital Channels
Press the first 3 digits, then press - , followed by the
remaining number.
Example, to select channel 15-1, press 1, 5, - ,1,
then press OK.
To Select by Channel List
All channels found from channel scan are listed on
the Channel List screen. You can select channels
from this screen.
1 P ress OK to display the Channel List screen.
2 P ress or to select a channel number, then
press OK.
3 P ress BACK OR
22
to close the Channel List
Display Info
Press INFO to display the channel or input
information on the screen.
Press INFO again to hide the Info screen.
Set Aspect Ratio
1 P ress Menu to display the Wide menu.
2 G o to Wide repeatedly or press
or
through the options, then press OK.
Normal
When watching a 4:3 content,
the TV displays a standard
picture with black side bars.
When viewing a 16:9 content,
it displays a full picture.
Wide
When displaying a 4:3 content,
the picture is stretched
horizontally to fill the width
of the screen. When watching
a 16:9 content, the image is
slightly overscan.
to scroll
Basic Operations
The entire picture is uniformly
enlarged to retain its original
proportion. However, some
parts of the picture may be
hidden.
Panoramic
The picture is stretched
horizontally on the left and
right sides to fill the width of
the screen. The center of the
picture is not stretched.
Stretch
The picture is stretched
horizontally on the left and
right sides.
Picture Mode
The TV Allows you to play image slide shows from a
USB memory stick.
Note: Due to the wide variety of picture file formats some
formats may not be supported.
Playing Picture Files
1 Insert the USB memory stick into the USB slot of
the TV.
Take note of the correct direction. Do
not force the device into the slot.
TV
(side panel)
USB
Zoom
2 A message box will appear on the screen.
Note: Panoramic mode is only available on 4:3 contents.
Stretch is only available on 16:9 contents.
Press or to select OK.
USB media detected. Enter multimedia menu?
Selecting Input Source
OK
YES
Cancel
NO
The TV provides various ways to select the input
source:
On the Remote Control
Press INPUT repeatedly to scroll through the
input source options, then press OK to select
the input.
23
3 Press OK to select USB.
Basic Operations
4 The displayed screen varies depending on the media type you selected. Press
file or function, then press OK.
,
, or to select a
Picture Viewer: Photo
PATH:/MMP/Photo/
File Name: P1130130
Resolution: 768x1024
Size:
113KB
..
P1130130
P1130131
P1130132
P1130133
P1130134
P1130136
P1130137
1
2
3
Start Slideshow
Sort:
Newest First
View:
Thumbnails
Setting
4
P1130135
Page 1 of 7
1 S tart Slideshow button: Play slide show.
2 S ort button: Change sorting order. The label on this button varies depending on the
current sorting order. (Name A-Z, Name Z-A, Newest First, Oldest First)
3 V iew button: Change view mode. The button label varies depending on the current view.
(Folders, Thumbnails)
4 S etting button: Change slide show settings.
Audio Only Mode
While watching TV or playing music, you can set the TV to Audio Only mode to turn off the TV display
and save power.
1 Press AUDIO to activate Audio Only mode. A message appears on the screen, then after a few
seconds, the TV display turns off.
2 Press any button to turn on the display again and exit Audio Only mode.
24
Basic Operations
Wall Mount
Installing Wall Mount
The wall mount kit allows you to mount the TV on the wall. For detailed information on installing the wall
mount, see the instructions provided with the wall mount kit.
Note: The wall mount kit is not included with the product.
For product protection and safety reasons, JVC strongly recommends contacting a
technician or professional for assistance installing the wall mount and setting up the
TV. If you decide to install the wall mount and TV without the assistance of a technician
or professional, JVC will not be responsible for any damage to the product or injury to
yourself or others.
Do not install your wall mount while your TV is turned on. It can result in personal injury
due to electric shock
1 Disconnect all cables connected to the TV.
2 Carefully place the TV on a flat and clean surface with screen facing down. It is recommended to place
the TV cover or protection sheet between the TV and flat surface.
3 Remove the screw attaching the stand and TV.
4 Remove and store the stand for future use.
Wall Mount
Product Model #
VESA hole pattern (mm)
Standard Screw
EM40NF5/EM40RF5 (40”)
100 x 100
M4
EM43NF5/EM43RF5 (43”)
200 x 200
M6
EM50NF5/EM50RF5 (50”)
200 x 200
M6
EM55NF5/EM55RF5 (55”)
400 x 400
M6
Note: The mounting should be strong enough to bear the weight of the display.
The wall mounting bracket should have UL or related approval.
25
Adjusting the Menu Settings
Menu Operation
Input
TV
Picture
Video
component
Audio
Options or submenu
HDMI-1
HDMI / MHL
Setup
Main Menu
Music
Closed Caption
Wide
Channel
Sleep Timer
Remote Control
1 Display the menu.
Press MENU.
2 Select a menu option.
1. Press
or
to select a menu or option.
2. Press OK or to enter a menu or confirm
an option.
3 Adjust or select the setting.
or
to select an option. Or, press or
1. Press
to adjust a setting, such as Brightness.
2. Press OK to apply the settings.
4 Exit the menu.
26
To exit the menu, press BACK OR
. Or, to return
to a previous screen one at a time, press MENU or .
Adjusting the Menu Settings
Input Menu
Select the input source signal.
TV
To watch analog or digital TV channels.
Video
To use VCRs, camcorders, or game consoles connected via composite connection.
TV
Video
component
Component
To use VCRs, camcorders, or game consoles connected via component connection.
HDMI-1
HDMI-1
HDMI / MHL
Music
To connect HD devices via HDMI Connection.
Channel
8
Volume
HDMI/MHL
To connect MHL devices via HDMI/MHL Connection.
Music
To play music from a music player connected via music port.
Picture Menu
Select the picture mode.
Picture
Select the picture mode.
Custom
Standard
Movie
Game
Vivid
Sport
For custom picture settings.
For standard picture settings.
For moving pictures such as movies.
For fast and dynamic pictures suitable with playing games.
For bright and vivid picture settings.
Suggested settings for sporting events.
Backlight
Adjusts the backlight that affects the overall brilliance of the picture. (0 ~100)
Contrast
Adjusts the white level in the picture. Low contrast makes pictures look dark,
high contrast makes pictures washed out. (0 ~100)
Brightness
Adjusts the brightness setting. (0 ~100)
Color
Adjusts the amount of color level in the picture. (0 ~100)
27
Picture Mode
Standard
Backlight
85
Contrast
90
Brightness
50
Color
60
Tint
0
Sharpness
8
Size & Position
Color Temperature
Advanced Picture
Professional
Picture
Reset Picture Mode
Reset Picture Mode
Adjusting the Menu Settings
Tint
Adjusts the sharpness of the edges of elements in the picture.
Sharpness
Selects WIDE to change TV viewing aspect ratio (Normal, Wide, Zoom and Stretch).
Size & Position
Horiz. Position/Vertical Position
Horiz. Size/Vertical Size
Adjusts the horizontal/vertical position of the picture.
Adjusts the horizontal/vertical side of the picture.
Color Temperature
Color Temperature
Red/Green/Blue Gain
Red/Green/Blue Offset
Reset Color Temperature
Apply preset color temperature setting.
(Custom/Cool/Natural/Warm)
Adjusts the red/green/blue gain settings according to your
preference.
Adjusts the red/green/blue offset settings according to your
preference.
Resets the color temperature to default settings.
Advanced Picture
CrystalColor
Dynamic Contrast
Adaptive Backlight
Noise Reduction
Digital NR
Film Mode
Super White
Black Enhancement
Produces more vivid and crisp color
picture.
(Off/Normal/Rich)
Automatically enhances the image for
greater picture details.
Enables or disable adaptive backlight.
(Off/On)
Resets the color temperature to
default settings.
Reduces noise level of digital signals.
(Off/Low/Medium/High)
Produces smoother motion picture
when viewing movies.
Brightens the white color to produce
more vibrant images.
Enhances black colors to a darker level.
Professional Picture
Adjust various professional picture settings.
Reset Picture Settings
Reset the picture mode settings to default.
28
Crystal Color
Off
Dynamic Contrast
Off
Adaptive Backlight
Off
Noise Reduction
Off
Digital NR
Off
Film Mode
Off
Super White
Off
Black Enhancement
Off
Adjusting the Menu Settings
Audio Menu
XinemaSound 3D*
Thrilling surround sound effects with XinemaSound 3D, which delivers
deep bass and crystal clear diaglogue.. (Off, Movie, News)
XinemaSound
XinemaSound delivers a natural audio balance, with deep bass,
clear dialogue and detailed treble. (Off, Movie, News)
Bass
Adjusts the bass level to your preference. (-12 ~ 12)
Treble
Adjusts the treble level to your preference. (-12 ~ 12)
Balance
Adjusts the audio level of the L/R channels of the speakers to your preference.
(-10 ~ 10)
Lip Sync
Adjusts to match the movements and the lips of the person talking on the
screen. (0 ~ 5)
TV Speakers
Turn the internal speakers on or off.
Audio Only
Outputs audio from the TV speakers but turns off the TV display.
Digital Audio Out
Selects the type of digital audio output. (Off / Dolby Digital / PCM)
Analog Audio Out
Select the type of analog audio output. (Fixed / Variable)
Reset Audio Mode
Resets the audio mode settings to default settings.
Equalizer Settings
Adjusts the equalizer settings. (120Hz / 500Hz / 1.5KHz / 5KHz / 10KHz)
*Available on EM55NF5 & EM55RF5 only.
29
XinemaSound
Movie
Bass
8
Treble
7
Balance
2
Lip Sync
2
TV Speakers
Off
Audio Only
Digital Audio Out
Equalizer
Settings
Analog Audio
Out
Reset Audio
AudioMode
Mode
Analog
Audio
Out
Equalizer
Settings
Off
Adjusting the Menu Settings
Setup Menu
Name Input
The Name Input feature of the TV allows you to add a label name on an input source.
To label an input source , perform the following steps:
1 Press MENU.
2 Press
or
to select “Setup”, then press or OK.
3 Press
or
to select “Name Input”, then press or OK.
4 Press
or
to select “Input Source”, then press or OK.
5 Press
or
to select the input source that you want to add a label
name to, then press OK.
6 To select a custom label:
or
or
to select “Input Labels”, then press or OK.
to select “Custom” and press OK.
1. Press
2. Press
To enter desired label:
1. Press
2. Press
3. Press
,
,
or
Press BACK OR
to select the text box, then press OK.
, or to select a character, then press OK.
, or to select “OK”, then press OK.
Input Source
TV
Input Labels
TV
TV
to close the menu screen.
CEC Settings
CEC allows you to control devices using your TV remote control when the CEC devices are connected
via HDMI.
CEC Function
Device Search
Enable or disable CEC function.
If CEC Function is enabled, select to search for CEC devices.
Connect to your device though Audio Return Channel-enabled HDMI Port
System Audio Control
(HDMI 1)
Menu Language
Selects the on-screen menu language.
Time Zone
Daylight Saving
30
Selects a location to apply the time zone.
Enables or disables daylight savings time.
Adjusting the Menu Settings
Parental Control
The Parental Control feature allows you to control and restrict TV programs by Channel Lock , TV Rating,
or Movie Rating.
Access Parental Control Menu
The Parental Control menu requires you to enter the password to access its submenu.
1 Press MENU.
2 Press
or
to select “Setup”, then press or OK.
3 Press
or
to select “Parental Control”, then press or OK.
4 Enter the 4-digit password, press
options.
, or to select “OK”, then press OK to access the submenu
Please enter password.
OK
Cancel
Note: The default password is “0000”.
5 Press
or
to select the submenu options, then press or OK to enter the submenu.
Restrict By Channel
Use the Channel Lock feature to restrict viewing a specified channel. Once locked channel is selected, the
TV displays a blank screen.
1 In the “Parental Control” menu, press
2 Press
or
or
to select “Channel Lock”, then press or OK.
to highlight a channel that you want to lock.
3 Press OK to mark and lock the channel.
4 Press
31
to return to the previous screen or press BACK OR
to close the menu screen.
Adjusting the Menu Settings
Restrict By TV/Movie Rating
You can select which TV/Movie rating to lock for viewing.
1 In the “Parental Control” menu, press
then press or OK.
or
to select a rating submenu,
3 Press
or
USA-TV
USA-Movie
CAN-English
CAN-FRENCH
Alt. Region Rating
Block Unrated Shows
New Password
Reset Parental Settings
, then press OK to select the rating.
to return to the previous screen or press RETURN to close the menu screen.
Change Password
1 In the “Parental Control” menu, press
or
to select “Change Password”, then press or OK.
2 Enter a new password, then press OK.
3 Re-enter the new password, then press OK to complete.
Power Indicator
To turn on/off the LED power indicator while TV is on.
Setup Wizard
Run the guided setup.
System Information
Display the system information of the TV.
Reset All Settings
Reset all TV settings to default settings.
32
Off
Channel Lock
•E
nable Rating
Select “On” to enable rating.
•U
SA-TV
Set the rating by age level and genre.
•C
AN-English
Set by Canadian English movie rating standards.
•C
AN-French
Set by Canadian French movie rating standards.
•B
lock Unrated Shows
Select “On” to block unrated shows.
2 Press
Enable Rating
Off
Closed Caption
Closed Caption decodes and displays closed caption data of television programs as subtitle. This feature
displays text on the screen or it translates and displays text in another language.
1 Press MENU.
2 Press or to select “Closed Caption”, then press or OK.
3 P ress or to select “Analog Closed Caption” or “Digital Closed
Analog Closed Caption
Off
Digital Closed Caption
Digital CC Options
Caption”, then press or OK.
Note: Either “Analog Closed Caption” or “Digital Closed Caption” is available depending on your TV service.
4 Press
or to select a closed caption type or select “Off” to disable this feature, then press OK.
For digital closed caption, you can select closed caption options, such as text size and text color.
Press
or to select closed caption options, such as text size and text color. Press
or to select
“Digital CC Options”, then press OK. Select the desired options.
5 Press BACK OR
to close the menu screen.
Wide
Press MENU and select wide to change TV viewing aspect ratio.
1 Press
2 P ress
or
to select “Wide”, then press or OK.
or
to select “Normal” or “Wide”, “Zoom”, “Panoramic”.
Wide
Normal
Note: Refer to Basic Operation section for details.
Zoom
Panoramic
33
Adjusting the Menu Settings
Channel Menu
Select Antenna/Cable
Select Antenna or Cable for the service connected to your TV.
TV Mode
1 Press MENU.
2 Press or to select “Channel”, then press or OK.
3 P ress or to select “TV Mode”, then press OK.
4 P ress or to select “Antenna”, or “Cable”, then press OK.
Cable
Auto Channel Scan
Partial Channel Scan
Find Channel
Channel Management
Digital MTS
English
Scan Channels
Auto Scan Channels
When you run auto scan, the TV scans for all available channels. Make sure the antenna/cable is
connected properly.
1 Press MENU.
2 Press or to select “Auto Channel Scan”, then press
3 P ress or to select “Start Scan”, then press OK.
or OK.
Scanning progress is displayed on the menu screen. To stop scanning, select “Stop Scan” and press OK.
Note: Auto scan may take 15 to 30 minutes to find available channels.
Partial Scan Channels
You can partially scan for network signal within a specified range of channels.
1 Press MENU.
2 Press or to select “Partial Channel Scan”, then press
3 P ress or to select “Scan Mode”, then press or OK.
4 P ress or to select an option, then press OK.
or OK.
• “Analog/Digital”: Scans for both analog and digital channels.
• “Analog”: Scans for analog channels.
• “Digital”: Scans for digital channels.
5 P ress
6 P ress
7 P ress
or
to select “From Channel”, then enter a starting channel range.
or
to select “To Channel”, then enter an ending channel range.
or
to select “Start Scan”, then press OK.
Scanning progress is displayed on the menu screen. To stop scan, select “Stop Scan” and press OK.
34
Adjusting the Menu Settings
Add Channel
New channels may be added to your area periodically. Use the Add Channel function to add new
channels.
1 Press MENU.
2 Press or to select “Channel”, then press or OK.
3 P ress or to select “Find Channel”, then press or OK.
4 P ress or to select “Enter Channel”, then enter a channel.
5 P ress to select “Add Channel”, then press OK.
Added channels are listed on the Channel List screen.
Delete Channel
To remove a channel from the Channel List screen.
1 Press MENU.
2 Press or to select “Channel”, then press or OK.
3 P ress or to select “Channel Management”, then press or OK.
4 P ress or , then press OK to mark the channels that you want to remove from the Channel List.
5 P ress BACK OR
to close the menu screen.
Sleep Timer
Sleep timer sets the TV to automatically turn off after a preset amount of time.
35
Appendix
Supported Resolution
Model Name
EMxxNF5 & EMxxRF5
640 x 480 @ 60, 75Hz
Supported HDMI Timing
800 x 600 @ 60, 75Hz
1024 x 768 @ 60, 75Hz
1920 x 1080 @ 60Hz
Supported Video Timing
(NTSC, Composite)
480i
Supported Video Timing
(ATSC, Composite, HDMI)
480i, 480p, 720p, 1080i, 1080p
36
Troubleshooting
If your TV fails to work properly, check the following guidelines for possible causes and solutions.
Consult your local dealer or service outlet if problems persists.
Problem
No power.
Solution
• Make sure the power cord is plugged in.
• The power is off, press the Power button to turn on the TV.
• Try another outlet.
Poor sound or no sound.
• Unplug the unit for an hour, then plug it back in.
• Press the VOL button on the remote control or the Power/Multi
Function button on the TV to adjust volume .
• Press MUTE on the remote control to ensure that mute is not on.
• The channel or cable TV is experiencing problems, tune to another
channel.
• Check the TV audio settings.
Poor picture or no picture.
• Check for possible sources of interference.
• The channel or cable TV is experiencing problems, tune to another
channel.
• Make sure that channels are set into memory.
• Check the antenna or cable TV connections.
Poor reception on some
channels.
• Check for possible sources of interference.
• The channel or cable TV is experiencing problems, tune to another
channel.
• Make sure that channels are set into memory.
• The network signal is weak, adjust the antenna to receive better
reception.
• Check for possible sources of interference.
The remote control does
not work.
• Batteries may be weak, dead, or inserted incorrectly.
• Point the remote control directly at the remote sensor on the TV with
an angle of 35°.
• Remove any obstacles between the remote control and the TV.
• Remote control is out of range, move closer to the TV.
TV shuts off.
• Make sure LED Indicator is lit up when any button is pressed.
• Sleep timer is on.
No CATV reception.
• Power is interrupted.
• Check all cable TV connections.
Closed caption is not
activated.
37
• Set the TV Mode in Channel menu.
• The program tuned is not closed captioned. Try another channel.
• Enable Closed Caption in the menu.
Specifications
Specifications are subject to change without prior notice.
38
Specifications
Specifications are subject to change without prior notice.
39
Specifications
Specifications are subject to change without prior notice.
40
Specifications
Specifications are subject to change without prior notice.
3500:1
41
Limited Warranty
ON PARTS AND LABOR
This Limited Warranty covers units that are purchased as new and in the United States Only. This Product is
manufactured, distributed, and warranted by AmTRAN Video Corporation (hereinafter known as “Warrantor”)
under brand license by JVC KENWOOD Corporation. The Warrantor provides a warranty to the original purchaser
of a new Product against defects in materials and workmanship for a period of one (1) year of non-commercial
usage and ninety (90) days of commercial use. If a Product covered by this warranty is determined to be
defective within the warranty period, the Warrantor will either repair or replace the Product at its sole option
and discretion.
To obtain warranty service, contact our Technical Support:
Visit the Web Site: http://jvc-tv.com/support
Or call our Customer Support and Service Center
1-855-868-1928
PRE-AUTHORIZATION MUST BE OBTAINED BEFORE SENDING ANY PRODUCT TO A DESIGNATED SERVICE CENTER.
Proof of purchase in the form of a purchase receipt or copy thereof is required to show that a Product is within
the warranty period.
Parts and Labor
There will be no charge for parts or labor during the warranty period. Replacement parts and Products may be
new or recertified at the Warrantor’s option and sole discretion. Replacement parts and Products are warranted
for the remaining portion of the original warranty or for ninety (90) days from warranty service or replacement,
whichever is longer.
Type of Service
Defective Products must be sent to the designated service center to obtain warranty service. The Warrantor is
not responsible for the transportation costs to the service center, but will cover the costs for return shipping to
the customer. PRE-AUTHORIZATION IS REQUIRED BEFORE SENDING ANY PRODUCT TO A DESIGNATED SERVICE
CENTER FOR WARRANTY SERVICE.
Product returned to designated service centers must utilize either the original carton box and shipping material
or packaging that affords an equal degree of protection. Technical Support will provide instructions for packing
and shipping the covered Product to the designated service center.
Limitations and Exclusions
The Warrantor’s one-year limited warranty only covers defects in materials and workmanship. This warranty
does not cover product issues caused by any other reason, including but not limited to cosmetic damage,
normal wear and tear, improper operation, improper voltage supply or power surges, signal issues, damages
from shipping, acts of God, any type of customer misuse, modifications or adjustments, as well as installation
and set-up issues or any repairs attempted by anyone other than by an authorized service center. Products
with unreadable or removed serial numbers, or requiring routine maintenance are not covered. This one year
limited warranty does not cover Products that are sold “AS IS”, “Open Box”, “FACTORY RECERTIFIED”, or by a nonauthorized reseller.
THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE LISTED OR DESCRIBED ABOVE. ANY IMPLIED
WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY. AND FITNESS FOR A PARTICULAR
PURPOSE, SHALL BE LIMITED IN DURATION TO THE PERIOD OF TIME SET FORTH ABOVE. THE WARRANTOR’S
TOTAL LIABILITY FOR ANY AND ALL LOSSES AND DAMAGES RESULTING FROM ANY CAUSE WHATSOEVER
INCLUDING WARRANTOR’S NEGLIGENCE, ALLEGED DAMAGE, OR DEFECTIVE GOODS, WHETHER SUCH DEFECTS
ARE DISCOVERABLE OR LATENT, SHALL IN NO EVENT EXCEED THE PURCHASE PRICE OF THE PRODUCT. THE
WARRANTOR SHALL NOT BE RESPONSIBLE FOR LOSS OF USE, LOSS OF INFORMATION OR DATA, COMMERCIAL
LOSS, LOST REVENUE OR LOST PROFITS, OR OTHER INCIDENTAL OR CONSEQUENTIAL DAMAGES. SOME STATES
DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS OR THE EXCLUSION OF INCIDENTAL
OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU. THIS
WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY FROM
STATE TO STATE. THIS WARRANTY IS SUBJECT TO CHANGE WITHOUT NOTICE. CHECK TV.JVC.COM FOR THE MOST
CURRENT VERSION.
42
Personal Data
If your Product is capable of storing personal data and other information, all contents and information will
be deleted in the course of some in-home and all ship-in warranty service. If this occurs, your product will be
restored to you configured as originally purchased. You will be responsible for restoring all applicable data
and passwords. Recovery and reinstallation of user data is not covered under this Limited Warranty. In order to
protect your personal information, we recommends that you always clear all personal information from the unit
before it is serviced, regardless of the servicer.
Important Open Source Software Notice
Some JVC device may contain free software which is based on the license granted under the GNU General
Public License and Lesser General Public License (hereinafter “GPL/LPGL”) that are subject to the GPL2.0/LGPL2.1
You may use, modify, or distribute only if you agree to all of the terms and conditions of the GPL/LGPL. For more
details on the list of JVC devices with open source software, please visit : http://jvc-tv.com/support
Please note that any software component developed or created independently by AmTRAN Video Corporation
shall not be subject to “GPL/LGPL” requirement for provision of the source code. Users are urged to read the
details for the relevant license carefully before using the software component covered by “GPL/LGPL.”
You can obtain a copy of the GPL/LGPL license from http://www.gnu.org/licenses/gpl and
http://www.gnu.org/licenses/lgpl.
For details of any open source software on your JVC device, please visit the following web site:
http://jvc-tv.com/support
Please note that we are unable to answer any inquiry relating to the contents, etc of the source code.
Permission is hereby granted, free of charge, to any person obtaining a copy of any such software and
associated documentation files (the “Open Source Software”), to deal in the Open Source Software without
restriction including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense,
and/or sell copies of the Open Source Software, and to permit persons to whom the Open Source Software is
furnished to do so, subject to the following conditions:
THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING
BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTIBILITY, FITNESS FOR A PARTICULAR PURPOSE AND
NON-INFRINGEMENT, IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
Third Party Application Notice
You may encounter third-party applications (including links to websites, widgets, software or other software
utilities (“Applications”) that interact with the Product. Such Applications are owned and operated by third
parties that are not related to or sponsored by us. Use of an Application through the Product is at your own
option and risk. We do not endorse any included third-party Applications or third-party products or services.
Your use of included Applications is subject to the terms of use and privacy policy of the Application provider.
43
Do not send product or other
correspondence to this address
Attn: Product Registration
P.O. BOX 50427
IRVINE, CA 92619
44
Place
Stamp
Here
Register Online: http://jvc-tv.com/support
First Name
Last Name
Address
Apt. #
City
State
Zip Code
Phone Number
E-mail Address
Model Number
Serial Number
Dealer Name
Purchase Price
Date of Purchase
Comments
I would like to receive the JVC Community e-mail newsletter
45