PREMISE CONNECTIVITY SYSTEMS
TM
Patch Panel and Cross Connect Systems
Category 6+ Patch Panels
Category 5e+ Patch Panels
Designation Labeling System
Category 5e+ Wall Mount Jack Panels
Category 3 Modular-110 Patch Panels
C
Category 5 10/100
Modular-Telco Patch Panels
Category 3 Modular-Telco Patch Panels
Category 5e High Density
Feed-Thru Patch Panels
Unloaded High Density
Multimedia Patch Panels
48-Port Angled High Density
Multimedia Patch Panel
Category 5e Standard Density
Feed-Thru Patch Panels
Standard Density Unloaded
Multimedia Patch Panels
Multimedia F-Type and
BNC Feed-Thru Patch Panels
12-Port Multimedia
Wall Mount Patch Panels
C
PATCH
PANELS
Category 6+ Component
Level Patch Panels
Category 6+ patch panels are designed to exceed TIA/EIA-568-B.2-1 component,
permanent link and channel level performance specifications providing usable
bandwidth beyond 250MHz and are backward compatible with lower level cabling
systems. These high-density panels are available in 12 through 96 port versions and
feature enhanced front and rear labeling features for easy circuit identification.
Category 6+ panels support both T568A and T568B wiring configurations using an
easy to read color-coded wiring label.
Panels are constructed for maximum strength and durability and feature a fully
enclosed, 6-port modular design, which provides flexibility and protection of printed
circuitry during termination. A newly designed RJ-45 contact configuration provides
enhanced plug to jack connection integrity for superior reliability. Rear termination
is made quick and easy using a 4-pair inline 110 type connector compatible with
our Category 6 multi-pair impact tool to reduce installation time or an industry
standard single position 110 or Krone termination tool.
Panels include an integrated cable management feature for cable routing and strain
relief requirements. An optional cable management bar, which mounts easily to the
back of the panel, is available for improved cable routing and strain relief.
24458MD-C6C
48458MD-C6C
SMB-350
Category 6+ Component Level Patch Panels
C1
PART NO.
DESCRIPTION
12458MD-C6C
12-Port Category 6+ Patch Panel, T568A/B Wiring, 1.75” High
24458MD-C6C
24-Port Category 6+ Patch Panel, T568A/B Wiring, 1.75” High
48458MD-C6C
48-Port Category 6+ Patch Panel, T568A/B Wiring, 3.50” High
96458MD-C6C
96-Port Category 6+ Patch Panel, T568A/B Wiring, 7.00” High
SMB-350
Panel Mount Cable Management Bar, 3.5” Deep
PREMISE CONNECTIVITY SYSTEMS
800 446-2377 or visit our Web Site at www.signamax.com.
C
PATCH
PANELS
Category 6+ Component
Level Angled Patch Panel
Category 6+ 48-port angled patch panels are designed to the same high level performance
requirements as our standard Category 6+ panel panels. This 48-port panel has the added
feature of an angled design to help route patch cords to vertical rack or cabinet mounted
cable management. This unique feature eliminates the need for horizontal cable
management panels, which provides additional rack space in high density applications.
The panels support both T568Aand T568B wiring for maximum flexibility using easy to
read color-code wiring labels and can be terminated using standard single position 110 or
Krone termination tools. Panels include an integrated cable management feature for cable
routing and strain relief requirements.
48458MD-C6C-A
Category 6+ Component Level Angled Patch Panel
PART NO.
DESCRIPTION
48458MD-C6C-A 48-Port Category 6+ Angled Patch Panel, T568A/B Wiring, 3.5” High
TM
800 446-2377 or visit our Web Site at www.signamax.com.
C2
C
PATCH
PANELS
Category 6+ Component
Level Mini Patch Panels
Category 6+ Mini Patch Panels are available in 12-port size and are ideal
for installations where space is at a premium and open bay racks cannot
be used. Panels are provided mounted to either an 89D bracket or in a
hinged version, both of which allow for easy access to the back of the
panel for termination to 110 connectors. Both panels exceed
TIA/EIA-568-B.2-1 component, permanent link and channel level
performance specifications.
12458M-C6C
Category 6+ Component Level Mini Patch Panels
PART NO.
DESCRIPTION
12458M-C6C
12-Port Category 6+ Mini Panel w/89D Bracket, T568A/B Wiring
12458MH-C6C
12-Port Category 6+ Mini Hinged Panel, T568A/B Wiring
12458MH-C6C
Category 6+ Component
Level Shielded Patch Panel
The Category 6+ Shielded Panel is available in a 24-port version and
provides the ability to terminate fully shielded Category 6 cable. Panels
are designed to exceed TIA/EIA-568-B.2-1 component level specifications
for superior performance. The panel features front labeling areas and
comes with a rear cable management bar that mounts easily to the back
of the panel.
24458S-C6C
Category 6+ Component Level Shielded Patch Panel
C3
PART NO.
DESCRIPTION
24458S-C6C
24-Port Category 6+ Shielded Patch Panel,
T568A/B Wiring, 1.75” High
PREMISE CONNECTIVITY SYSTEMS
800 446-2377 or visit our Web Site at www.signamax.com.
C
PATCH
PANELS
Category 5e+ Component
Level Patch Panels
Category 5e+ patch panels are designed to exceed TIA/EIA-568-B.2 component, permanent link
and channel level performance specifications providing usable bandwidth beyond 155 MHz.
These high-density panels are available in 12 through 96 port versions and feature enhanced
front and rear labeling features for easy circuit identification. Category 5e+ panels support
both T568A and T568B wiring configurations using an easy to read color-coded wiring label.
Panels are constructed for maximum strength and durability and feature a fully enclosed,
6-port modular design, which provides flexibility and protection of printed circuitry during
termination. Rear termination is made quick and easy using a 4-pair inline 110 type connector
compatible with standard multi-pair impact tool to reduce installation time or single position
110 or Krone termination tool.
Panels include an integrated cable management feature for cable routing and strain relief
requirements. An optional cable management bar, which mounts easily to the back of the
panel, is available for improved cable routing and strain relief.
24458MD-C5E
48458MD-C5E
Category 5e+ Component Level Patch Panels
PART NO.
DESCRIPTION
12458MD-C5E
12-Port Category 5e+ Patch Panel, T568A/B Wiring, 1.75” High
24458MD-C5E
24-Port Category 5e+ Patch Panel, T568A/B Wiring, 1.75” High
48458MD-C5E
48-Port Category 5e+ Patch Panel, T568A/B Wiring, 3.50” High
96458MD-C5E
96-Port Category 5e+ Patch Panel, T568A/B Wiring, 7.00” High
SMB-350
Panel Mount Cable Management Bar, 3.5” Deep
TM
800 446-2377 or visit our Web Site at www.signamax.com.
C4
C
PATCH
PANELS
Category 5e+ Component
Level Angled Patch Panel
Category 5e+ 48-port angled patch panels are designed to the same high level
performance requirements as our standard Category 5e+ panel panels. This
48-port panel has the added feature of angled design to help route patch cords
to vertical rack or cabinet mounted cable management. This unique feature
eliminates the need for horizontal cable management panels, which provides
additional rack space in high density applications.
The panels support T568A and T568B wiring configurations using an easy to read
color-coded wiring label and are constructed for maximum strength, which allows
for termination a multi-pair impact tool to reduce installation time. Panels include
an integrated cable management feature for cable routing and strain relief
requirements.
48458MD-C5E-A
Category 5e+ Component Level Angled Patch Panel
PART NO.
DESCRIPTION
48458MD-C5E-A 48-Port Category 5e+ Angled Patch Panel, T568A/B Wiring, 3.5” High
C5
PREMISE CONNECTIVITY SYSTEMS
800 446-2377 or visit our Web Site at www.signamax.com.
C
PATCH
PANELS
Category 5e+ Component
Level Mini Patch Panels
Mini Patch Panels are available in 12-port size and are ideal for installations where space
is at a premium and open bay racks cannot be used. Panels are designed to exceed
TIA/EIA-568-B.2 component level specifications and include port numbering, write-on
labeling areas and are compatible with both T568A and T568B wiring configurations.
Panels are provided mounted to either an 89D bracket or in a hinged version, both of
which allow for easy access to the back of the panel for termination to 110 connectors.
12458M-C5E
12458M-C5E-A
12458MH-C5E
Category 5e+ Component Level Mini Patch Panels
PART NO.
DESCRIPTION
12458M-C5E
12-Port Category 5e+ Mini Panel w/89D Bracket, T568A/B Wiring
12458M-C5E-A
12-Port Category 5e+ Angled Mini Panel w/89D Bracket, T568A/B Wiring
12458MH-C5E
12-Port Category 5e+ Mini Hinged Panel, T568A/B Wiring
Category 5e+ Component
Level Shielded Patch Panel
24458S-C5E
Category 5e+ Shielded Modular Patch Panels provide a fully shielded
design for cabling applications using 4-pair screened twisted-pair
cables. Signamax shielded 110 patch panels are high-density
panels, with a removable cover for EMI and RFI protection and
allows for easy access to 110 terminations. Shielded panels
are engineered to exceed TIA/EIA-568-B.2 component level
specifications.
Category 5e+ Component Level Shielded Patch Panel
PART NO.
DESCRIPTION
24458S-C5E
24-Port Category 5e+ Shielded Patch Panel, T568A/B Wiring, 1.75” High
TM
800 446-2377 or visit our Web Site at www.signamax.com.
C6
C
PATCH
PANELS
Designation Labeling Sheets
Category 6+ and Category 5e+ patch panel jacks & 110 wiring
connections can be labeled using specific color-coded labels that can
be either hand-printed on-site or custom-printed using ink-jet or laser
printers. Templates can be downloaded from the Signamax web site, to
help installers lay out label sheets for custom printing. Front-panel
labels are available in TIA/EIA 606 colors, and rear-panel labels are
available in white. Labels can be pre-printed prior to installation, and
applied to the panels at time of installation. Labels are supplied on 8.5” x
11” sheets suitable for printing using most ink jet and laser printers.
DLF6-XX
Designation Labeling Sheets
PART NO.
DESCRIPTION
DLF6-XX
Front Panel Designation Label Sheet
DLR6-WH
Rear Panel Designation Label Sheets, White Only
For standard color Substitute XX for Color in P/N. For use with Cat 5e panels only.
BU=Blue
GN=Green
OR=Orange
RD=Red
WH=White YE=Yellow
Category 5e+ Wall Mount
Jack Panels
DLR6-WH
Category 5e+ Wall Mount Jack Panels are available in 12, 24, and 36 port
sizes with connections enclosed in a protective housing featuring a
removable front cover for easy access to the front facing RJ-45 and
110 connectors. Panels are provided with standoff legs for routing cables
behind the panel and a cable tie-down feature at the panel entry point. The
12 and 36 port panels have the same footprint as 100 and 300 pair 110
blocks. The jack panels accommodate both T568A and T568B wiring using
an easy to follow color-coded wiring label.
12458JPL-C5E
24458JPL-C5E
Category 5e+ Wall Mount
Jack Panels
C7
PART NO.
DESCRIPTION
12458JPL-C5E
12-Port Category 5e+ Jack Panel w/Standoff Legs, T568A/B Wiring
24458JPL-C5E
24-Port Category 5e+ Jack Panel w/Standoff Legs, T568A/B Wiring
36458JPL-C5E
36-Port Category 5e+ Jack Panel w/Standoff Legs, T568A/B Wiring
PREMISE CONNECTIVITY SYSTEMS
800 446-2377 or visit our Web Site at www.signamax.com.
36458JPL-C5E
C
PATCH
PANELS
Category 3 Modular-110 Patch Panels
Category 3 Modular-110 Patch Panels are available in 12, 24, 48 and 96 port sizes and
support RJ-12 6-wire and RJ-45 8-wire USOC wiring systems. Panels are constructed for
maximum strength and durability and can be terminated with either multi-pair or single
position 110 or Krone termination tools. Panels feature a write-on surface to provide port
identification on both the front and rear termination areas. Panels include an integrated
cable management/strain relief system for improved cable routing and strain relief.
48116-C4U
Category 3 Modular-110 Patch Panels
PART NO.
DESCRIPTION
RJ-12 6 Wire (Active Pins 1-6)
12116-C4U
12-Port Category 3 RJ-12 6 Wire 110 Patch Panel, USOC Wiring, 1.75” High
24116-C4U
24-Port Category 3 RJ-12 6 Wire 110 Patch Panel, USOC Wiring, 1.75” High
48116-C4U
48-Port Category 3 RJ-12 6 Wire 110 Patch Panel, USOC Wiring, 3.50” High
96116-C4U
96-Port Category 3 RJ-12 6 Wire 110 Patch Panel, USOC Wiring, 7.00” High
RJ-45 8 Wire (Active Pins 1-8)
12458-C4U
12-Port Category 3 RJ-45 8 Wire 110 Patch Panel, USOC Wiring, 1.75” High
24458-C4U
24-Port Category 3 RJ-45 8 Wire 110 Patch Panel, USOC Wiring, 1.75” High
48458-C4U
48-Port Category 3 RJ-45 8 Wire 110 Patch Panel, USOC Wiring, 3.50” High
96458-C4U
96-Port Category 3 RJ-45 8 Wire 110 Patch Panel, USOC Wiring, 7.00” High
Category 5 10/100BaseT/TX Telco Patch Panel
Category 5 10/00BaseTX Modular-Telco Panels provide the ability to connect to 10/100BaseTX
switches with Telco style or RJ-45 interface connectors, while maintaining Category 5/5e
performance throughout the cabling system. The panels are available in 24- and 48-port sizes
with RJ-45 connectors wired to 50 position (25 pair) Telco style connectors using standard pin
configuration. Category 5e/25-Pair Powersum Telco Assemblies and 12-Leg Category 5e
Adapter Cables can be ordered for cabling between panels and network equipment.
48454-C5FT
Category 5 10/100BaseT/TX Telco Patch Panels
PART NO.
DESCRIPTION
24454-C5MT
24-Port Category 5 Telco Patch Panel, 10/100TX Wiring, Male, 1.75” High
24454-C5FT
24-Port Category 5 Telco Patch Panel, 10/100TX Wiring, Female, 3.50” High
48454-C5MT
48-Port Category 5 Telco Patch Panel, 10/100TX Wiring, Male, 1.75” High
48454-C5FT
48-Port Category 5 Telco Patch Panel, 10/100TX Wiring, Female, 3.50” High
TM
800 446-2377 or visit our Web Site at www.signamax.com.
C8
C
PATCH
PANELS
Category 3 Modular-Telco Patch Panels
Category 3 Modular-Telco Patch Panels are available in 24, 48 and 96-port sizes and support
RJ-11 2-wire, RJ-11 4-wire, RJ-45 2 wire and RJ-45 4 wire USOC wiring systems. Each 50
position Telco connector is provided with both Velcro strain relief brackets and hex sockets
to secure 25 pair cables with either 90 degree or 180 degree cable exit. Panels front features
a write-on surface to provide port identification. Panels include an integrated cable
management/strain relief system for improved cable routing and strain relief.
48454-C3MU
Category 3 Modular-Telco Patch Panels
PART NO.
DESCRIPTION
RJ-11 2 Wire (Active Pins 3-4)
24112-C3MU
24-Port Category 3 RJ-11 2W Telco Patch Panel, USOC, Male, 1.75” High
48112-C3MU
48-Port Category 3 RJ-11 2W Telco Patch Panel, USOC, Male, 3.50” High
96112-C3MU
96-Port Category 3 RJ-11 2W Telco Patch Panel, USOC, Male, 7.00” High
RJ-11 4 Wire (Active Pins 2-5)
24114-C3MU
24-Port Category 3 RJ-11 4W Telco Patch Panel, USOC, Male,1.75” High
48114-C3MU
48-Port Category 3 RJ-11 4W Telco Patch Panel, USOC, Male, 3.50” High
96114-C3MU
96-Port Category 3 RJ-11 4W Telco Patch Panel, USOC, Male, 7.00” High
RJ-45 2 Wire (Active Pins 4-5)
24452-C3MU
24-Port Category 3 RJ-45 2W Telco Patch Panel, USOC, Male, 1.75” High
48452-C3MU
48-Port Category 3 RJ-45 2W Telco Patch Panel, USOC, Male, 3.50” High
96452-C3MU
96-Port Category 3 RJ-45 2W Telco Patch Panel, USOC, Male, 7.00” High
RJ-45 4 Wire (Active Pins 3-6)
24454-C3MU
24-Port Category 3 RJ-45 4W Telco Patch Panel, USOC, Male, 1.75” High
48454-C3MU
48-Port Category 3 RJ-45 4W Telco Patch Panel, USOC, Male, 3.50” High
96454-C3MU
96-Port Category 3 RJ-45 4W Telco Patch Panel, USOC, Male, 7.00” High
For female 25-pair connector substitute F for M in P/N.
C9
PREMISE CONNECTIVITY SYSTEMS
800 446-2377 or visit our Web Site at www.signamax.com.
C
PATCH
PANELS
Category 5e High Density
Feed-Thru Patch Panels
When connecting equipment in a wiring room, it is often necessary to cross connect using patch
cables, in order to interface to the distribution cabling system. Signamax High Density FeedThrough Patch Panels provide 12, 24, 48 and 96 modular coupling ports, while maintaining
Category 5e performance. These panels are available in a high-density version for use where
rack space is at a premium. Color-coded icon tabs can be ordered for port identification.
48458FTHD-C5E
Category 5e High Density Feed-Thru Patch Panels
PART NO.
DESCRIPTION
12458FTHD-C5E 12-Port Category 5e High Density Feed-Thru Patch Panel, 1.75” High
24458FTHD-C5E 24-Port Category 5e High Density Feed-Thru Patch Panel, 1.75” High
48458FTHD-C5E 48-Port Category 5e High Density Feed-Thru Patch Panel, 3.50” High
96458FTHD-C5E 96-Port Category 5e High Density Feed-Thru Patch Panel, 7.00” High
Unloaded High Density
Multimedia Panels
Unloaded High Density Multimedia Panels are available in 12-, 24-, 48- and 96-port sizes.
Unloaded panels provide the ability to field configure panels using a variety of connector
modules including Category 6+ jacks as well as a wide range of multimedia modules.
48U-HDMMP
Unloaded High Density Multimedia Panels
PART NO.
DESCRIPTION
12U-HDMMP
12-Port Unloaded High Density Multimedia Panel, 1.75” High
24U-HDMMP
24-Port Unloaded High Density Multimedia Panel, 1.75” High
48U-HDMMP
48-Port Unloaded High Density Multimedia Panel, 3.50” High
96U-HDMMP
96-Port Unloaded High Density Multimedia Panel, 7.00” High
TM
800 446-2377 or visit our Web Site at www.signamax.com.
C10
C
PATCH
PANELS
48-Port Angled High Density
Unloaded Multimedia Panels
This 48-port multimedia panel has the added feature of angled design to help route patch
cords to vertical rack or cabinet mounted cable management. This unique feature
eliminates the need for horizontal cable management panels, which provides additional
rack space in high density applications. The panel provides the flexibility to field configure
panels using a variety of connector modules including Category 6+ jacks as well as a wide
range of copper, fiber and audio/video multimedia modules.
48U-HDMMP-A
48-Port Angled High Density Unloaded Multimedia Panels
PART NO.
DESCRIPTION
48U-HDMMP-A
48-Port Angled High Density Unloaded Multimedia Panel, 3.50” High
Category 5e Standard Density
Feed-Thru Patch Panels
When connecting equipment in a wiring room, it is often necessary to cross connect using
patch cables, in order to interface to the distribution cabling system. Signamax feed-through
patch panels provide from 12 to 48 modular coupling ports, while maintaining Category 5e
performance. These panels are available in a high-density version where rack space is at a
premium. Color-coded icon tabs can be ordered for port identification.
24458FT-C5E
Category 5e Standard Density Feed-Thru Patch Panels
C11
PART NO.
DESCRIPTION
12458FT-C5E
12-Port Category 5e Feed-Thru Patch Panel, 1.75” High
16458FT-C5E
16-Port Category 5e Feed-Thru Patch Panel, 1.75” High
24458FT-C5E
24-Port Category 5e Feed-Thru Patch Panel, 3.50” High
32458FT-C5E
32-Port Category 5e Feed-Thru Patch Panel, 3.50” High
48458FT-C5E
48-Port Category 5e Feed-Thru Patch Panel, 5.25” High
PREMISE CONNECTIVITY SYSTEMS
800 446-2377 or visit our Web Site at www.signamax.com.
C
PATCH
PANELS
Standard Density Unloaded
Multimedia Panels
Unloaded panels provide the ability to field configure panels using a
verity of connector modules including Category 6+ and Category 5e+
jacks as well as a wide range of multimedia modules.
PART NO.
DESCRIPTION
12U-MMP
12-Port Unloaded Standard Density Multimedia Panel, 1.75” High
16U-MMP
16-Port Unloaded Standard Density Multimedia Panel, 1.75” High
24U-MMP
24-Port Unloaded Standard Density Multimedia Panel, 3.50” High
32U-MMP
32-Port Unloaded Standard Density Multimedia Panel, 3.50” High
48U-MMP
48-Port Unloaded Standard Density Multimedia Panel, 5.75” High
24U-MMP
Multimedia Patch Panels
Multimedia panels are available preconfigured with F-Type or BNC
feed-thru connectors. The female/female F-Type 75 ohm connectors
are rated for 1 GHz performance. The BNC panels are provided
female/female BNC feed-thru connectors.
PART NO.
DESCRIPTION
12CT-FT
12-Port Unloaded Multimedia Patch Panel, 1.75” High
16CT-FT
16-Port Unloaded Multimedia Patch Panel, 1.75” High
24CT-FT
24-Port Unloaded Multimedia Patch Panel, 3.50” High
32CT-FT
32-Port Unloaded Multimedia Patch Panel, 3.50” High
48CT-FT
48-Port Unloaded Multimedia Patch Panel, 5.75” High
24F-FT
24BNC-FT
For connector type substitute CT for the following: F=F Type BNC-BNC Tye
Other connector types are available
12-Port Multimedia
Mini Wall Mount Panels
12MHF-FT
12-Port Multimedia Mini Wall Mount Panels are available pre-configured
with Category 5e feed-thru, F-Type feed-thru or BNC feed-thru connectors.
Panels can be provided with an 89D bracket for mounting or in a hinged
version for easy access to the back of the panels.
PART NO.
DESCRIPTION
12MCT-FT
12-Port Multimedia Panel w/89D Bracket
12MHCT-FT
12-Port Mutimedia Hinged Panel
12U-M89
12-Port Unloaded Multimedia Panel w/89D Bracket
12U-MH
12-Port Unloaded Multimedia Hinged Panel
For connector type substitute CT for the following: F=F Type BNC-BNC Tye
C5E=Cat 5e Feed-Thur Adapter. Other connector types are available.
12MBNC-FT
TM
800 446-2377 or visit our Web Site at www.signamax.com.
C12
Download PDF
Similar pages