DP392-N_AUSALLK_ENG
6/2/08
12:00 PM
Page 1
ENGLISH
DP889
For service/
support Call:
Toll Free Number
1-800-243-0000
(http://us.lgservice.com)
© Copyright 2008, LG Electronics U.S.A., Inc.
P/NO : MFL48000502
DP392-N_AUSALLK_ENG
6/2/08
12:00 PM
Page 2
Safety Precaution
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK. DO NOT REMOVE
COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
This lightning flash with arrowhead symbol within an equilateral triangle is
intended to alert the user to the presence of uninsulated dangerous voltage
within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the
user to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the product.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT
EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
WARNING: Do not install this equipment in a confined space such as a book case or
similar unit.
CAUTION: Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. Slots and openings in the cabinet are provided for ventilation
and to ensure reliable operation of the product and to protect it from over heating.
The openings should be never be blocked by placing the product on a bed, sofa, rug
or other similar surface. This product should not be placed in a built-in installation
such as a bookcase or rack unless proper ventilation is provided or the manufacturer's instruction has been adhered to.
CAUTION: This product employs a Laser System.
To ensure proper use of this product, please read this owner’s
manual carefully and retain it for future reference. Should the
unit require maintenance, contact an authorized service center.
Use of controls, adjustments or the performance of procedures other than those
specified herein may result in hazardous radiation exposure.
To prevent direct exposure to laser beam, do not try to open the enclosure. Visible
laser radiation when open. DO NOT STARE INTO BEAM.
CAUTION: The apparatus should not be exposed to water (dripping or splashing) and
no objects filled with liquids, such as vases, should be placed on the apparatus.
2
CAUTION
• The ventilation should not be impeded by covering the ventilation openings
with items, such as newspapers, table-cloth, curtains etc.
• No naked flame sources, such as lighted candles, should be placed on the
apparatus.
• Used batteries should be disposed of safely and not incinerated. Attention
should be shown to the environment aspects of battery disposal.
• Use the apparatus in tropical and moderate climates only.
• The excessive sound pressure from earphones and headphones can cause
hearing loss.
• The battery shall not be exposed to excessive heat such as sunshine, fire or
the like.
CAUTION concerning the Power Cord
Most appliances recommend they be placed upon a dedicated circuit;
That is, a single outlet circuit which powers only that appliance and has no additional
outlets or branch circuits. Check the specification page of this owner's manual to be
certain.Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall
outlets, extension cords, frayed power cords, or damaged or cracked wire insulation
are dangerous. Any of these conditions could result in electric shock or fire.
Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord
replaced with an exact replacement part by an authorized service center.
Protect the power cord from physical or mechanical abuse, such as being twisted,
kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs,
wall outlets, and the point where the cord exits the appliance.
To disconnect power from the mains, pull out the mains cord plug. When installing the
product, ensure that the plug is easily accessible.
DP392-N_AUSALLK_ENG
6/2/08
12:00 PM
Page 3
FCC WARNING: This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made.
Important Safety Instructions
REGULATORY INFORMATION: FCC Part 15
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of
the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV
technician for help.
3. Heed all warnings.
FCC COMPLIANCE: The responsible party for this product’s compliance is:
12. Use only with the cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tipover.
Marketed and Distributed by LG Electronics U.S.A., Inc.,
1000 Sylvan Avenue, Englewood Cliffs, NJ.
Phone: 1-201-816-2000.
1. Read these instructions.
2. Keep these instructions.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A
polarized plug has two blades with one wider than the other. A grounding
type plug has two blades and a third grounding prong. The wide blade or
the third prong are provided for your safety. If the provided plug does not fit
into your outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at
plugs, convenience receptacles, and the point where they exit from the
apparatus.
11. Only use attachments/accessories specified by the manufacturer.
13. Unplug this apparatus during lightning storms or when unused for long
periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when
the apparatus has been damaged in any way, such as power-supply cord
or plug is damaged, liquid has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
3
Contents
DP392-N_AUSALLK_ENG
6/2/08
12:00 PM
Page 4
Safety Precaution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Types of Playable Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Main Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Power connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Hooking up the unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Selecting the operation mode . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Rechargeable battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Adjust the settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10-11
Displaying Disc Information . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Playing a Disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12-13
Listening to Music Disc or files . . . . . . . . . . . . . . . . . . . . . . . . .14
Viewing photo files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Watching an AV input . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Using a USB Flash Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Using an External Memory Card . . . . . . . . . . . . . . . . . . . . . . . .15
Using an Internal Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Copying a file . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Editing a file . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Language Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
Area Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Copyrights
It is forbidden by law to copy, broadcast, show, broadcast via cable, play in
public, or rent copyrighted material without permission. This product features
the copy protection function developed by Macrovision. Copy protection signals are recorded on some discs. When recording and playing the pictures of
these discs picture noise will appear. This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents
and other intellectual property rights owned by Macrovision Corporation and
other rights owners. Use of this copyright protection technology must be
authorized by Macrovision Corporation, and is intended for home and other
limited viewing uses only unless otherwise authorized by Macrovision
Corporation. Reverse engineering or disassembly is prohibited.
Types of Playable Discs
Type
Logo
DVD-VIDEO: Discs such as movies that can be
purchased or rented.
DVD-R: Video mode and finalized only
DVD-RW: Video mode and finalized only
About the
Symbol Display
“
” may appear on your TV display during operation and indicates that the
function explained in this owner’s manual is not available on that disc.
DVD+R: Video mode only
DVD+RW: Video mode only
Regional Codes
This unit has a regional code printed on the rear of the unit. This unit can play
only DVD discs labeled same as the rear of the unit or “ALL”.
• Most DVD discs have a globe with one or more numbers in it clearly visible
on the cover. This number must match your unit’s regional code or the disc
cannot play.
• If you try to play a DVD with a different regional code from your player, the
message “Check Regional Code” appears on the TV screen.
4
Audio CD: Music CDs or CD-R/CD-RW in music CD
format that can be purchased.
This unit plays DVD±R/RW and CD-R/RW that contains audio titles, MP3, WMA
and/or JPEG files. Some DVD±RW/DVD±R or CD-RW/CD-R cannot be played
on this unit due to the recording quality or physical condition of the disc, or the
characteristics of the recording device and authoring software.
DP392-N_AUSALLK_ENG
6/2/08
12:00 PM
Page 5
Main Unit
a POWER (1): Turn the unit ON or OFF.
b MENU: Accesses the DVD menu.
c SETUP: Accesses or exits the setup menu.
d DISPLAY: Accesses On-Screen Display.
e LCD MODE: Selects the LCD mode. (16:9,
4:3 or Off)
f MODE: Selects an operation mode.
g COLOR/BRIGHT: Displays the Brightness or
Color menu for LCD display.
To adjust the color or brightness of the LCD
display, press COLOR/BRIGHT repeatedly to
display the Brightness or Color menu then use
b / B to adjust the value. Press ENTER to confirm the adjustment.
h VOL (+/-): Adjusts the volume level of the builtin speaker and earphones.
i Battery charge and power indicator
• The indicator turns red while charging and
changes to green color when the charging is
complete. (Refer to page 9 for details.)
• The indicator turns green for a few seconds
when the unit is turned on.
j Joystick: Use the joystick to select an item in
the menu. Press the joystick to confirm the
menu selection.
k Remote sensor: Point the remote control here.
l x (Stop): Stops playback.
m Memory card slot
Insert a memory card (SD, MMC or MS).
n N / X (PLAY / PAUSE): Starts playback.
Pause playback temporarily, press again to exit
pause mode.
o . (Skip): Search backward* or returns to
the beginning of current chapter or track or go
to the previous chapter or track.
* Press and hold button for about two seconds.
p > (Skip): Search forward* or Go to next
chapter or track.
* Press and hold button for about two seconds.
q USB adapter connector: Connect the supplied USB adapter cable then connect a USB
device.
r AV IN/OUT jack: Connect a TV or an external
device.
s Earphones jacks: Connect earphones here.
t DC IN connector: Connect the AC adapter or
automotive adapter.
5
DP392-N_AUSALLK_ENG
6/2/08
12:00 PM
Page 6
Remote Control
SKIP/SEARCH (. / >): Search* backward /
forward. Go to next or previous chapter/track.
* Press and hold button for about two seconds.
SLOW (t / T): Reverse/ Forward slow playback.
a
b
SETUP: Accesses or exits the setup menu.
MENU: Accesses the DVD menu.
vV b B: Navigates the menus.
ENTER ( ): Confirms menu selection.
RETURN (O): Press to move backwards in the
menu or exit the menu.
DISPLAY: Accesses On-Screen Display.
b
d
a
POWER (1): Switches the unit ON or OFF.
AUDIO (
): Selects an audio language or audio
channel.
SUBTITLE (
ANGLE (
available.
6
c
): Selects a subtitle language.
): Selects a DVD camera angle, if
d
TITLE: Access the disc’s title menu.
REPEAT: Repeats a chapter, track, title or all.
A-B: Repeats a section.
ZOOM: Enlarges video image.
MARKER : Marks any point during playback.
SEARCH : Displays [Marker Search] menu.
RANDOM: Plays tracks in random order.
MODE: Selects an operation mode.
Pinch the battery holder clip together then pull the
tab to remove the battery holder. Insert the battery
with the + facing in the same direction as the + on
the battery holder. Replace the battery holder with
battery into the Remote Control unit making sure
that it is fully inserted.
• Replace Remote Control unit battery with 3V
micro lithium cells such as CR. 2025 or its equivalent.
• Dispose of battery safety in accordance with
local laws. Do not dispose of in fire.
PAUSE/STEP (X): Pauses playback temporarily/
press repeatedly for frame-by-frame playback.
PLAY (N): Starts playback.
STOP (x): Stops playback.
Numerical buttons: Selects numbered options in a
menu.
Character buttons: Selects a desired character
by pressing a button repeatedly.
PROG.: Enters the program edit mode.
CLEAR: Removes a track number on the Program
List.
c
Put the battery into the Remote Control
Warning for replaceable lithium battery
• danger of explosion if battery incorrectly replaced.
• replace only with the same type battery.
• additional warning marking close to the battery if
intended to be replaced by users.
Warning : The battery used in this device may
present a fire or chemical burn hazard if mistreated. Do not recharge, disassemble, incinerate, or heat above 100 °C (212 °F).
Replace the battery with Matsushita Elec. Ind.
Co., Ltd. (Panasonic), part no. CR. 2025 only.
Use of another battery may present a risk of fire
or explosion. Dispose of used batteries. Keep
batteries away from children. Do not disassemble or dispose of in fire.
DP392-N_AUSALLK_ENG
6/2/08
12:00 PM
Page 7
Connecting a USB Flash Drive
Getting Started
Inserting or removing a memory card
Insert a memory card to the memory card slot on the unit.
To withdraw the memory card from the slot, press on the center of the memory
card then withdraw it carefully.
Card useable on this unit
• Secure Digital Card (SD)
• Multi Media Card (MMC)
• Memory Stick (MS)
• This unit supports only memory card with FAT12, FAT16 or FAT32 format.
• Only use the memory cards recommended above.
• The card will only fit in one direction; do not force it.
The card should fit snugly when properly inserted.
• Any memory card may not be available on the unit.
• Do not extract the memory card while operating (play, copy, etc.).
Connect the small end of the USB adapter cable to the USB port on the unit.
Connect a USB Flash Drive to the other end of the USB adapter.
• Music files (MP3/WMA) and photo files (JPEG) files can be played.
For details of operation on each file type, refer to relevant pages.
• Maximum Files/USB Flash Drive: Less than 650 (total number of files and
folders)
• This unit supports only USB Device with FAT16 or FAT32 format.
• USB Flash Drive with version 1.1 only.
• A USB Flash Drive which requires additional program installation when you
have connected it to a PC, is not supported.
• Do not extract the USB device while in operation.
• We recommend that you back up your important files in the USB Flash Drive
to protect against accidental loss.
• If you use a USB extension cable or USB HUB, the USB device might not be
recognized.
• The USB function of this unit does not support all kinds of USB devices.
• Digital camera and mobile phone are not supported.
SD
or
MMC
or
MS
To USB port
USB Flash Drive
USB Adapter Cable
7
DP392-N_AUSALLK_ENG
6/2/08
12:00 PM
Page 8
Power connections
Plug into the
“DC 12V IN” jack.
Connecting the Power Cable
Connect the supplied power cable from the unit to a power socket.
Attach the power plug to the body of the AC adapter.
(The actual set may differ from the drawing.)
Plug into the car’s
cigarette lighter
socket.
Plug into the
“DC 12V IN”
jack.
Plug into
a power
source.
Automotive adapter
• This automotive adapter operates on DC 8.5-16V.
• Contact an electrical parts distributor for assistance in selecting a suitable
automotive adapter.
• Manufactured by NANJING WANLIDA TECHNOLOGY CO., LTD.
Power cord
release knob
AC adapter
• This AC adapter operates on 100-120V~ 1A 50/60Hz.
• Contact an electrical parts distributor for assistance in selecting a suitable
AC plug adapter or AC cord set.
• Manufactured by NANJING WANLIDA TECHNOLOGY CO., LTD
Connect the Automotive adapter
This unit and its automotive adapter are designed for use in vehicles that have
8.5-16 volt, negative ground electrical systems. This is standard for most vehicles. If your vehicle has a different type of electrical system, the DC power system cannot be used.
8
Caution
• To prevent electrical shock and possible damage to your unit or vehicle,
always unplug the automotive adapter from the cigarette lighter socket
before you remove the plug from your unit.
• A 3 amp. 250V fuse for protection is installed in the automotive adapter.
• While the engine is being started, disconnect the automotive adapter from
the car’s cigarette lighter socket.
• Do not operate your unit when the car battery is discharged.
Peak current from the car generator may cause the DC fuse to blow.
• If the vehicle’s supply voltage drops below approximately 10 volts, your unit
may not work properly.
• Do not leave your unit in a place where the temperature exceeds 70°C
(158°F), or the pick-up device may be damaged.
Examples include:
- Inside a car with the windows closed and in direct sunshine.
- Near a heating appliance.
DP392-N_AUSALLK_ENG
6/2/08
12:00 PM
Page 9
Hooking up the unit
Selecting the operation mode
Audio and Video Connection for AV IN or AV OUT
Connect the AV IN/OUT jack on the unit to the corresponding input or output
jacks on your TV or an external device using the supplied AV cable as shown
below.
Plug into the
“AV IN/OUT” jack.
You need to select an operation mode before using this unit. Press MODE on
the unit and the operation mode selection menu appears. Use b / B to select a
mode then press ENTER.
• [DISC]: To playback the inserted disc.
• [EXTERNAL]: To playback the file(s) in the connected USB Flash Drive or
external memory card. After selecting [EXTERNAL], select [USB] for USB
Flash Drive or [Memory Card] for the external memory card.
• [INTERNAL]: To playback the file(s) in the internal memory.
• [AV IN]: To watch a video/audio signal from the external device using this
unit.
Mixed media – MP3/WMA and JPEG
When playing media containing with MP3/WMA and JPEG files together, you
can select which menu of files you would like to play by pressing TITLE.
Rechargeable battery
TV or the external device
Manufactured under license from Dolby Laboratories. “Dolby” and the
double-D symbol are trademarks of Dolby Laboratories.
• Its internal rechargeable battery provides you with the freedom to pass it
around and play the files without the power cord.
• The internal rechargeable battery will start charging only when the unit is
turned off and the AC adapter is connected to a power outlet.
• The charging stops if you turn on the unit.
• The charging will take approximately 3 hour 30 minutes.
• Operating time on battery: approximately 3 hour 30 minutes
The operating time on battery may vary depending on the battery status,
operational status and environment conditions.
• The battery indicator will turn red while charging. Once the charging is complete, the indicator light changes to green.
• When the remaining time of the battery power is under a few minutes,
“Check Battery” will appear on the screen.
9
DP392-N_AUSALLK_ENG
6/2/08
12:00 PM
Page 10
Adjust the display settings
Adjust the settings
BUTTON
1 Display setup menu:
SETUP
2 Select a desired option on the first level:
vV
3 Move to second level:
B
4 Select a desired option on the second level:
vV
5 Move to third level:
B
6 Change the setting:
v V / ENTER
Adjust the settings - more you can do
When you turn on for the first time
The menu for language selection will appear when you turn on the unit for the
first time. You must select a language to use the unit. Use vV b B to select a
language then press ENTER and the confirm menu will appear. Use b B to
select [Enter] then press ENTER.
Adjust the language settings
Menu Language – Select a language for the Setup menu and on-screen display.
Disc Audio/Subtitle/Menu – Select a language for the Disc Audio/Subtitle/
Menu.
[Original]: Refers to the original language in which the disc was recorded.
[Other]: To select another language, press number buttons then ENTER to
enter the corresponding 4-digit number according to the language code list.
(see page 17) If you make a mistake while entering number, press CLEAR to
delete numbers then correct it.
[Off] (for Disc Subtitle): Turn off Subtitle.
TV Aspect – Select which screen aspect to use based on the shape of your TV
screen.
[4:3]: Select when a standard 4:3 TV is connected.
[16:9]: Select when a 16:9 wide TV is connected.
Display Mode – If you selected 4:3, you’ll need to define how you would like
widescreen programs and films to be displayed on your TV screen.
[LetterBox]: This displays a widescreen picture with black bands at the top
and bottom of the screen.
[Panscan]: This fills the entire 4:3 screen, cropping the picture as necessary.
JPEG Effect– Specify the transition style between pictures in a slideshow.
Adjust the audio settings
DRC (Dynamic Range Control) – Make the sound clear when the volume is
turned down (Dolby Digital only). Set to [On] for this effect.
Vocal – Set to [On] only when a multi-channel karaoke DVD is playing. The
karaoke channels on the disc, mix into normal stereo sound.
Adjust the lock settings
You must set the [Area Code] option to use the lock options. Select [Area Code]
option then press B. Enter a 4-digit password then press ENTER. Enter it again
then press ENTER to verify. If you make a mistake while entering number,
press CLEAR then correct it.
If you forget your password you can reset it. Display setup menu then input the
6-digit number “210499” and the password will be cleared.
Rating – Select a rating level. The lower the level, the stricter the rating. Select
[Unlock] to deactivate the rating.
Password – Sets or changes the password for lock settings.
[New]: Enter a new 4-digit password using the numerical buttons then press
ENTER. Enter the password again to confirm.
[Change]: Enter the new password twice after entering the current password.
Area Code – Select a code for a geographic area as the playback rating level.
This determines which area’s standards are used to rate DVDs controlled by the
parental lock. (See page 17)
10
DP392-N_AUSALLK_ENG
6/2/08
12:00 PM
Page 11
Adjust the others settings
B.L.E. (Black Level Expansion) – To select the black level of playback pictures. Set your preference and monitor’s ability.
FORMAT – Initializes the internal memory: everything recorded on the the internal memory will be erased.
Press ENTER when [Select] icon is highlighted then select [Yes] and press
ENTER.
Displaying Disc Information
BUTTON
1 Press DISPLAY during playback:
DISPLAY
2 Select an item:
vV
3 Adjust the Display menu settings:
b B / ENTER
4 To return the exit:
DISPLAY
Displaying Disc Information - more you can do
You can select an item by pressing vV and change or select the setting by
pressing b B.
Current title number/total number of titles
Current chapter number/total number of chapters
Elapsed playing time
Selected audio language or channel
Selected subtitle
Selected angle/total number of angles
You can check the battery charge status by pressing DISPLAY during playback
when the DC IN jack is not connected.
Full
Low
Recharge
Symbol Used in this Manual
A section whose title has one of the following symbols are applicable only to the
disc or file represented by the symbol.
ALL
All discs and files
ACD
Audio CDs
DVD
DVD and finalized DVD±R/RW
MP3
MP3 files
WMA
WMA files
11
DP392-N_AUSALLK_ENG
6/2/08
12:00 PM
Page 12
Playing a DVD that has a menu
Playing a Disc
BUTTON
1 Insert a Disc:
-
2 Select an operation mode (page 9):
MODE
3 Start playback:
N
4 Adjust the volume:
VOLUME
5 To stop playback:
x
PLAY
STOP
Playing a Disc - more you can do
Insert a disc
Open the LCD panel as shown below then insert a disc. Close the LCD panel.
DVD
Most DVD’s now have menus which load first before the film begins to play. You
can navigate these menus using vV b B or number button to highlight an
option. Press ENTER to select.
Skip to the next/previous chapter/track/file
ALL
Press SKIP (>) to move to the next chapter/track/file.
Press SKIP (.) to return to the beginning of the current chapter/track/file.
Press SKIP (.) twice briefly to step back to the previous chapter/track/file.
Pause a playback
ALL
Press PAUSE/STEP (X) to pause playback. Press PLAY ( N) to continue
playback.
Frame-by-Frame playback
DVD
Press PAUSE/STEP (X) repeatedly to play Frame-by-Frame playback.
Playing repeatedly
ALL
Press REPEAT repeatedly to select an item to be repeated. The current title,
chapter or track will be played back repeatedly. To return to normal playback,
press REPEAT repeatedly to select [Off].
Fast forward or fast reverse
DVD
Stop playback
Press STOP (x) to stop playback, the unit records the stopped point
depending on the disc. “ Xx ” appears on the screen briefly.
Press PLAY ( N) to resume playback (from the scene point). If you press
STOP (x) again or unload the disc (“ x ” appears on the screen), the unit will
clear the stopped point. (Xx =Resume Stop, x =Complete Stop)
The resume point may be cleared when a button is pressed.
(for example: POWER, OPEN, etc)
12
ACD
WMA
MP3
Press and hold SKIP (. or >) to play fast forward or fast reverse during
playback. You can change the various playback speed by pressing and holding
SKIP (. or >) repeatedly. Press PLAY ( N) to continue playing at normal
speed.
DP392-N_AUSALLK_ENG
6/2/08
12:00 PM
Repeating a specific portion (A-B)
DVD
Page 13
ACD
Press A-B at the beginning of the portion you wish to repeat and again at the
end of the portion. Your selected portion will be repeated continually.
To return to normal playback, press A-B to select [Off].
Selecting a subtitle language
) repeatedly to select a desired subtitle
Watching from a different angle
DVD
If the angle indicator appears on the screen for a moment, you can select a different camera angle by pressing ANGLE ( ) repeatedly.
During playback, press AUDIO ( ) repeatedly to switch between the available
audio languages, channels or encoding methods.
Slow down the playing speed
DVD
During playback, press SLOW (t or T) to slow down reverse or forward playback. You can change the various playback speed by pressing SLOW (t or T)
repeatedly. Press PLAY ( N) to continue playing at normal speed.
Watching an enlarged video image
DVD
WMA
MP3
DVD
You can mark a position on a disc to return to at the place. Simply press
MARKER at the desired position. The marker icon will appear on-screen briefly.
Repeat to place up to nine markers.
Also you can recall or clear the positions. Press SEARCH and [Marker Search]
menu. Use b or B to select a desired marker on the menu, then press ENTER
to recall it or CLEAR to clear it.
Last Scene Memory
DVD
ACD
During playback or in stop mode, press RANDOM for playback in random order.
Press RANDOM again to return to normal playback.
Mark a scene on a disc
DVD
During playback, press SUBTITLE (
language.
Hearing different audio
Playing in random order
DVD
ACD
This unit memorizes the last scene from the last disc that is viewed. The last
scene remains in memory even if you remove the disc from the player or switch
off the unit. If you load a disc that has the scene memorized, the scene is automatically recalled.
Screen Saver
The screen saver appears when you leave the unit in Stop mode for about five
minutes. If the Screen Saver is displayed for five minutes, the unit automatically
turns itself off.
During playback or pause mode, press ZOOM repeatedly to select zoom mode.
You can move through the zoomed picture using vVb B buttons. Press
CLEAR to exit.
Viewing the title menu
DVD
Press TITLE to display the disc's title menu, if available.
Viewing the DVD menu
DVD
Press MENU to display the disc menu, if available.
Starting play from selected time
DVD
Searches for the starting point of entered time code. Press DISPLAY then select
clock icon. Enter a time then press ENTER. For example, to find a scene at 1
hours, 10 minutes, and 20 seconds, enter "11020" and press ENTER. If you
enter the wrong number, press CLEAR to enter again.
13
DP392-N_AUSALLK_ENG
6/2/08
12:00 PM
Page 14
Viewing photo files
Listening to Music Disc or files
BUTTON
1 Select an operation mode (page 9):
MODE
MODE
2 Select music from the menu:
v V, MENU
2 Select a photo file on the menu:
v V, MENU
3 Start playback:
N PLAY
3 Display the selected file in full screen:
N PLAY
4 To stop playback:
x
4 To return to the menu:
x
STOP
Listening to Music Disc or files - more you
can do
Creating your own program
You can play the contents of a disc in the order you want by arranging the
playback order of the music on the disc. To add music on the program list,
press PROG. in stop mode to enter the program edit mode ( E mark appears
on the menu).
Select desired music on the [List] then press ENTER to add the music to the
program list. Select music from the program list then press ENTER to start programmed playback. To clear music from the program list, select the music you
want to clear then press CLEAR in program edit mode. To clear all music from
the program list, select [Clear All] then press ENTER in program edit mode.
The program is cleared when the disc is removed or the unit is turned off.
Displaying file information (ID3 TAG)
While playing an MP3 file containing file information, you can display the information by pressing DISPLAY repeatedly.
MP3/WMA music file requirements
MP3/WMA compatibility with this unit is limited as follows:
• File extensions: “.mp3”, “.wma”
•
•
•
•
BUTTON
1 Select an operation mode (page 9):
Sampling frequency: within 8 - 48 kHz (MP3), within 32 - 48kHz (WMA)
Bit rate: within 8 - 320kbps (MP3), within 48 - 384kbps (WMA)
CD-R/RW, DVD±R/RW Format: ISO 9660
Maximum Files/Disc: Less than 650 (total number of files and folders)
14
STOP
Viewing photo files - more you can do
Viewing photo files as a slide show
Use vV b B to highlight (
) icon then press ENTER to start slide show.
You can change slide show speed using b B when (
) icon is highlighted.
Skip to the next/previous photo
Press SKIP (. or >) to view the previous/next photo.
Rotate a photo
Use vV to rotate the photo in full screen counterclockwise or clockwise while
viewing a photo in full screen.
Pause a slide show
Press PAUSE/STEP (X) to pause a slide show. Press PLAY ( N) to continue
the slide show.
Listening to MP3 music during slide show
You can listen to MP3 music during slide show, if the disc contains music and
photo files together. Use vV b B to highlight (
) icon then press ENTER to
start slide show.
Watching an enlarged photo image
While viewing a photo in full screen, press ZOOM repeatedly to select zoom
mode. You can move through the zoomed photo using vVb B buttons. Press
CLEAR to exit.
Photo file requirement
JPEG file compatibility with this unit is limited as follows:
• File extensions: “.jpg”
• Photo size: Less than 4800 x 4800 pixels
• CD-R/RW, DVD±R/RW Format: ISO 9660
• Maximum Files/Disc: Less than 650 (total number of files and folders)
• Progressive and lossless compression JPEG image files are not supported.
DP392-N_AUSALLK_ENG
6/2/08
12:00 PM
Page 15
Watching an AV input
Using an External Memory Card
You can watch video/audio signals from an external device using this unit.
Music files (MP3/WMA) and photo files (JPEG) files can be played.
For details of operation on each file type, refer to relevant pages.
BUTTON
BUTTON
1 Connect the external device to this unit
using the supplied AV cable. (Page 9)
-
1 Insert a external memory card
in the unit (page 7):
2 Display the menu to select
the operation mode:
MODE
2 Display the menu to select
the operation mode:
MODE
3 Select [AV IN]:
b B, ENTER
3 Select [EXTERNAL]:
b B, ENTER
4 Watch a video from the external device.
-
4 Select [Memory Card]:
v V, ENTER
5 To exit [AV IN] mode, select [INTERNAL],
[DISC] or [EXTERNAL].
MODE, b B, ENTER
5 Select a file:
v V, MENU
6 Play the file:
N
-
PLAY
Using an Internal Memory
Using a USB Flash Drive
Music files (MP3/WMA) and photo files (JPEG) files can be played.
For details of operation on each file type, refer to relevant pages.
Music files (MP3/WMA) and photo files (JPEG) files can be played.
For details of operation on each file type, refer to relevant pages.
BUTTON
BUTTON
1 Connect a USB Flash Drive (page 7):
-
2 Display the menu to select
the operation mode:
MODE
1 Display the menu to select
the operation mode:
MODE
2 Select [INTERNAL]:
b B, ENTER
v V, MENU
N PLAY
3 Select [EXTERNAL]:
b B, ENTER
3 Select a file:
4 Select [USB]:
v V, ENTER
4 Play the file:
5 Select a file:
v V, MENU
6 Play the file:
N
PLAY
15
DP392-N_AUSALLK_ENG
6/2/08
12:00 PM
Page 16
Deleting a file or folder from the internal memory
Copying a file
You can delete a file or folder from the internal memory.
You can copy a JPEG or MP3/WMA file/folder from the current media to the
internal memory. You cannot copy a file/folder on the disc.
BUTTON
1 Select a file or folder:
v V, MENU
2 Display the File Manager menu:
DISPLAY
3 Select [COPY] option if you need:
bB
4 Start the copying:
ENTER
Editing a file
You can edit a JPEG or MP3/WMA file/folder in the internal memory. You
cannot copy a file/folder on the disc.
BUTTON
1 Select a file or folder in the internal
memory:
v V, MENU
2 Display the File Manager menu:
DISPLAY
Renaming a file or folder on the internal memory
You can rename a file or folder on the internal memory. The length of the name
can be up to 17 characters long.
Select a file or folder you would like to rename then press DISPLAY to show
File Manager options. Select [RENAME] option then press ENTER. Rename the
selected file or folder using the remote control buttons enter a name.
Press ENTER to save the name.
• v / V: Changes the character set by pressing the v / V button
repeatedly. (Number, Alphabet Capital or Alphabet Small).
• Numbers (0-9): Enters the corresponding character by pressing a button
repeatedly at the cursor position.
• CLEAR: Deletes the character at the cursor position.
• b / B: Moves cursor to left or right.
Create a new folder on the internal memory
3 Select an option:
bB
4 Execute the selected option:
ENTER
Editing a File menu - more you can do
Copying a file or folder to the internal memory
You can copy a file or folder to the internal memory.
Select a file or folder you would like to copy then press DISPLAY to show File
Manager options. Select [COPY] option then press ENTER. Select a directory
that you would like to copy to. Press ENTER to begin copying.
• If you try to copy a folder to the internal memory, the sub folder and files in
the sub folder are not copied.
16
Select a file or folder you would like to delete then press DISPLAY to show File
Manager options. Select [DELETE] option then press ENTER. Select [Yes] then
press ENTER.
You can create a new folder on the internal memory. Press DISPLAY to show
File Manager options. Select [MAKE] option then press ENTER and the new
folder will be created. Rename the folder as shown in [Renaming a file or folder
on the internal memory] above. Press ENTER to save the name.
• You can create a folder only in the ROOT directory.
DP392-N_AUSALLK_ENG
6/2/08
12:00 PM
Page 17
Language Codes
Use this list to input your desired language for the following initial settings: Disc Audio, Disc Subtitle, Disc Menu.
Language
Afar
Afrikaans
Albanian
Ameharic
Arabic
Armenian
Assamese
Aymara
Azerbaijani
Bashkir
Basque
Bengali, Bangla
Bhutani
Bihari
Breton
Bulgarian
Burmese
Byelorussian
Chinese
Code
6565
6570
8381
6577
6582
7289
6583
6588
6590
6665
6985
6678
6890
6672
6682
6671
7789
6669
9072
Language
Croatian
Czech
Danish
Dutch
English
Esperanto
Estonian
Faroese
Fiji
Finnish
French
Frisian
Galician
Georgian
German
Greek
Greenlandic
Guarani
Gujarati
Code
7282
6783
6865
7876
6978
6979
6984
7079
7074
7073
7082
7089
7176
7565
6869
6976
7576
7178
7185
Language
Hausa
Hebrew
Hindi
Hungarian
Icelandic
Indonesian
Interlingua
Irish
Italian
Javanese
Kannada
Kashmiri
Kazakh
Kirghiz
Korean
Kurdish
Laothian
Latin
Latvian, Lettish
Code
7265
7387
7273
7285
7383
7378
7365
7165
7384
7487
7578
7583
7575
7589
7579
7585
7679
7665
7686
Language
Lingala
Lithuanian
Macedonian
Malagasy
Malay
Malayalam
Maori
Marathi
Moldavian
Mongolian
Nauru
Nepali
Norwegian
Oriya
Panjabi
Pashto, Pushto
Persian
Polish
Portuguese
Code
7678
7684
7775
7771
7783
7776
7773
7782
7779
7778
7865
7869
7879
7982
8065
8083
7065
8076
8084
Language
Quechua
Rhaeto-Romance
Rumanian
Russian
Samoan
Sanskrit
Scots Gaelic
Serbian
Serbo-Croatian
Shona
Sindhi
Singhalese
Slovak
Slovenian
Spanish
Sudanese
Swahili
Swedish
Tagalog
Code
8185
8277
8279
8285
8377
8365
7168
8382
8372
8378
8368
8373
8375
8376
6983
8385
8387
8386
8476
Language
Tajik
Tamil
Telugu
Thai
Tonga
Turkish
Turkmen
Twi
Ukrainian
Urdu
Uzbek
Vietnamese
Volapük
Welsh
Wolof
Xhosa
Yiddish
Yoruba
Zulu
Code
8471
8465
8469
8472
8479
8482
8475
8487
8575
8582
8590
8673
8679
6789
8779
8872
7473
8979
9085
Area Codes
Choose a area code from this list.
Area
Afghanistan
Argentina
Australia
Austria
Belgium
Bhutan
Bolivia
Brazil
Cambodia
Canada
Chile
China
Colombia
Congo
Code
AF
AR
AU
AT
BE
BT
BO
BR
KH
CA
CL
CN
CO
CG
Area
Costa Rica
Croatia
Czech Republic
Denmark
Ecuador
Egypt
El Salvador
Ethiopia
Fiji
Finland
France
Germany
Great Britain
Greece
Code
CR
HR
CZ
DK
EC
EG
SV
ET
FJ
FI
FR
DE
GB
GR
Area
Greenland
Hong Kong
Hungary
India
Indonesia
Israel
Italy
Jamaica
Japan
Kenya
Kuwait
Libya
Luxembourg
Malaysia
Code
GL
HK
HU
IN
ID
IL
IT
JM
JP
KE
KW
LY
LU
MY
Area
Maldives
Mexico
Monaco
Mongolia
Morocco
Nepal
Netherlands
Netherlands Antilles
New Zealand
Nigeria
Norway
Oman
Pakistan
Panama
Code
MV
MX
MC
MN
MA
NP
NL
AN
NZ
NG
NO
OM
PK
PA
Area
Paraguay
Philippines
Poland
Portugal
Romania
Russian Federation
Saudi Arabia
Senegal
Singapore
Slovak Republic
Slovenia
South Africa
South Korea
Spain
Code
PY
PH
PL
PT
RO
RU
SA
SN
SG
SK
SI
ZA
KR
ES
Area
Sri Lanka
Sweden
Switzerland
Taiwan
Thailand
Turkey
Uganda
Ukraine
United States
Uruguay
Uzbekistan
Vietnam
Zimbabwe
Code
LK
SE
CH
TW
TH
TR
UG
UA
US
UY
UZ
VN
ZW
17
DP392-N_AUSALLK_ENG
6/2/08
12:00 PM
Page 18
Specifications
Troubleshooting
Symptom
No power.
Cause
Correction
The power cord is disconnected.
Plug the power cord into the wall
outlet securely.
The battery is discharged.
Recharge the battery.
The power is on,
but the unit does
not work.
No disc is inserted.
Insert a disc.
The operation mode is not selected correctly.
Use MODE button to select the
operation mode. (page 9)
No picture.
The TV is not set to receive the
signal from the unit.
Select the appropriate video input
mode on the TV.
The video cable is not connected
securely.
Connect the video cable securely.
The LCD mode is set to [Off].
Select an LCD mode other than
[Off].
No sound.
The equipment connected with the Select the correct input mode of
the audio amplifier.
audio cable is not set to receive
the signal from the unit.
The volume is set to minimum.
Use the volume controller to adjust
the volume.
The AUDIO options are set to the
wrong position.
Set the AUDIO settings to the correct position.
The unit does not An unplayable disc is inserted.
start playback.
The remote
control does not
work properly.
Insert a playable disc. (Check the
disc type and regional code.)
The rating level is set.
Change the rating level.
The remote control is not pointed
at the remote sensor on the unit.
Point the remote control at the
remote sensor of the unit.
The remote control is too far from
the unit.
Operate the remote control closer
to the unit.
General
Power requirements
Power consumption
External Dimensions
Net Weight (Approx.)
Operating temperature:
Operating humidity
Laser
Signal system
Internal Memory
DC 12 V
12W
231 x 40.2 x 145 mm (W x H x D)
1.06 kg
5 °C to 40 °C
5 % to 90 %
Semiconductor laser
NTSC
Flash Memory (256MB)
Connectors
Audio/Video Output/Input
ø3.5mm mini jack x 1
- Video: 1.0 V (p-p), 75 Ω, sync negative
- Audio (Analog): 2 Vrms (1 KHz, 0 dB)
Earphone terminal
ø3.5mm stereo mini jack x 2
Liquid Crystal Display
Panel size
Projection system
Driving system
Resolution
8 inches wide (diagonal)
R.G.B. stripe
TFT active matrix
800 x 480 (WVGA)
Accessories
•
•
•
•
•
RCA Video/Audio cable
AC Adapter (MPA-630A)
Automotive Adapter (DPDC1)
Remote Control
Battery for Remote Control (Lithium Battery)
Designs and specifications are subject to change without
prior notice.
18
DP392-N_AUSALLK_ENG
6/2/08
12:00 PM
Page 19
LG Electronics, Inc. Limited Warranty - USA
This LG Electronics product, will be repaired or replaced, at LG’s option, if it proves to be defective in material or workmanship, under normal use, during the warranty period (“Warranty Period”) listed below, effective from the date (“Date of Purchase”) of original consumer purchase of the product. This warranty is good only
to the original purchaser of the product and effective only when used in the United States, excluding U.S. Territories.
WARRANTY PERIOD:
LABOR: 90 days from the Date of Purchase.
PARTS: One Year from the Date of Purchase.
* Parts replaced are warranted for the remaining portion of the original warranty
period.
HOW SERVICE IS HANDLED:
Call 1-800-243-0000 for instructions on getting the defective unit repaired or
replaced.
Please retain dated sales receipt and your box to return the unit to LG for repair
or replacement.
Shipping both ways will be paid by LG during the Warranty Period. After the
Warranty Period, you pay inbound shipping charges and LG pays return shipping
charges.
Visit our website at: http://us.lgservice.com
THIS WARRANTY IS IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. TO THE EXTENT ANY IMPLIED WARRANTY IS REQUIRED BY LAW, IT IS LIMITED IN
DURATION TO THE EXPRESS WARRANTY PERIOD ABOVE. LG ELECTRONICS WILL NOT BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL OR PUNITIVE DAMAGES OF ANY NATURE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR PROFITS, LOST OR CORRUPTED PROGRAMMING OR DATA, OR ANY OTHER DAMAGE WHETHER BASED IN CONTRACT, TORT OR OTHERWISE. Some states do not allow the exclusion or limitation of incidental or consequential damages or limitation on how long an implied
warranty lasts, so the above exclusion or limitation may not apply to you. This warranty gives you specific legal rights and you may also have other rights that may
vary from state to state.
THIS LIMITED WARRANTY DOES NOT APPLY TO:
• Damages or operating problems that result from shipping, installation, adjustment of user controls, calibration, maintenance or failure to maintain, or separate
system components; and
• Damages or operating problems that result from normal wear and tear, misuse, abuse, operation outside environmental specifications or contrary to the
requirements or precautions in the Operating Guide, accident, lightning strikes or other natural causes, unauthorized modification or alteration, incorrect electrical current or voltage, reception problem caused by inadequate home antenna or faulty antenna connections, computer software, institutional or commercial
use, or other causes not arising out of defect in material or workmanship.
Therefore, the cost of repair or replacement of such defective product shall be borne by the consumer.
CUSTOMER INTER-ACTIVE CENTER NUMBERS:
For nearest Authorized Service Center, Where to buy, Product Assistance, or
Customer Assistance
Call 1-800-243-0000 (24 hours a day, 365 days per year) and select appropriate
options from the menu.
Or visit our website at http://us.lgservice.com
LG ELECTRONICS U.S.A., INC.
1000 SYLVAN AVENUE
ENGLEWOOD CLIFFS, NJ
Issue O
Printed in China
Download PDF
Similar pages