oxygen monitoring
PM5900
Oxygen Monitor
State-of-the-art accurate and durable oxygen monitor






High/Low Alarms from 15 - 100%
Three different alarms sounds; low/high,
check sensor and low battery
High impact housing
Easy mounting bracket, soft grip sides and
non-slip support feet
High accuracy ±3%
Warranty: 12 months
3.5 digit display
0473
Measurement range:
0.0 - 100% oxygen
Accuracy & Linearity
± 1% of full scale at constant temperature, relative humidity and pressure when calibrated at full scale
Total Accuracy
±3% actual oxygen level over full operating temperature range
Response Time
90% of final value is less than 12 seconds at 25ºC (77ºF)
Low Battery Indicator
Low battery icon displayed on graphics screen and audible alarm
Low Alarm Range
15 - 99% Oxygen (requires extra action to set below 18%)
High Alarm Range
18 - 100% Oxygen
High Alarm Deactivation Setting
Above 100% (“---” will appear)
Sensor Type
Galvanic Oxygen Sensor (fuel cell)
Dimensions (Monitor without cable and sensor attached)
4.4 cm (L) x 9.0 cm (W) x 13.8 cm (H)
Operating Temperature
10ºC - 45ºC
Operating Altitude
Sea level to 2,438m/8,000ft
Power Requirements
4 x AA batteries
Battery Life
Approximately 2,000 hours continuous use non-alarm conditions
Cable Length (Fully Extended)
3.1m (10ft)
Weight
Oxygen Monitor, Sensor, Batteries and Cable Weight included 500g
Standards Applied
EN 1041:2008, ISO 80601-2-55:2011, ISO 15001:2010, ISO 15223-1:2012, EN ISO 14971:2012
IEC/TR 60878 Ed. 3.0 b: 2015, IEC 62366-1:2015, IEC 60601-1: Ed. 3.0:2005, IEC 60601-1-2 Ed. 4.0:2014,
IEC 60601-1-6 Ed. 3.1b:2013, IEC 60601-1-8 Ed.2.0 b:2007
IEC 60068-2-6 Ed. 7.0 b: 2007, IEC 60068-2-27 Ed. 4.0 b: 2008
IEC 60068-2-64 Ed. 2.0 b: 2008
Regulatory Approvals
CE, CSA and FDA
Part Number: PM5900 Oxygen Monitor
5610000
Includes the following standard accessories*:
5620002
5620001
0120100
2
Sensor Cable*
(Coiled 1.0m, extendable)
Right angled connectors
504877 Precision
Medical Oxygen Sensor*
0120120
‘T’ Adapter*
‘V’ Mount Bracket
and Screw* (supplied fitted)
22mm I.D. - 22mm O.D.,
T = 15mm I.D.
0121205
0120110
0120101
5620003
5620004
Sensor Adapter Cap
Sensor Adapter Cap
22mm I.D.
22mm O.D.
0120103
0120106
2
Oxygen Concentrator
Adapter Cap
Callibration Assembly
0120109
‘T’ Adapter 15mm O.D. /
22mm O.D. - 22mm O.D.,
T = 15mm I.D./22mm O.D.
Non re-breathing
0120104
‘T’ Adapter
22mm I.D. - 22mm O.D.,
T = 15mm I.D./22mm O.D.
0120133
0120164
‘T’ Adapter 15mm I.D. -
Perfusion Circuit
‘T’ Adapter Set
15mm O.D., T = 15mm I.D.
for paediatric circuits
0120108
‘T’ Adapter
22mm O.D. - 22mm O.D.,
T = 15mm I.D./22mm O.D.
0120165
22mm I.D. - 22mm O.D.,
T = 15mm I.D.
0120107
2
‘T’ Adapter
22mm I.D. - 22mm O.D.,
T = 15mm I.D./22mm O.D.
Extended ‘T’
0120105
‘T’ Adapter - Metal
0120102
0120130
Connector
15mm O.D. - tapered barb
0120166
0121180
2
‘T’ Adapter
22mm I.D. - 22mm O.D.,
T = 15mm I.D./22mm O.D.
Non re-breathing
0120131
Connector 15 mm I.D./
22mm O.D. - tapered barb
0121181
2
Connector 22mm I.D./
30mm O.D. - tapered barb
FiO2 Sampling System
22mm I.D. - 22mm O.D.
0121182
Viamed ‘V’ Mount Pole
Clamp Large:
16 - 40mm clamping width
0121197
Viamed ‘V’ Mount Pole
Clamp Horizontal
10 - 40mm clamping width
Replacement ‘T’ Adapter
for 0120164
0121184
Viamed ‘V’ Mount
Rail Clamp
Attaches to most types of
medirail - 30mm (H) x 10mm (D)
Replacement Activator
for 0120164
Viamed ‘V’ Wall Mount
5620005
Precision Medical Wall
Mount & Screws
5620006
Precision Medical
Vertical Pole Mount
Clamp
Viamed ‘V’ Mount Pole
Clamp Small:
14 - 25mm clamping width
5620007
Precision Medical
Horizontal Pole Mount
Clamp
Distributed by:
Viamed Limited � 15 Station Road � Cross Hills
Keighley � West Yorkshire � BD20 7DT � United Kingdom
Tel: +44 (0)1535 634 542
Fax: +44 (0)1535 635 582
Email: info@viamed.co.uk Website: www.viamed.co.uk
Specifications Subject to Change
*MID477*
Part Number: 5690010
Date: 01/17
Download PDF
Similar pages