UNOPS eSourcing v2016.1
Section II: Schedule of Requirements
eSourcing reference: ITB/2016/293
A. Summary of Requirements
UNOPS requirements are comprised of the following lots:
• Lot 1: Furniture
• Lot 2: Projectors & Supplies
• Lot 3: Household equipment
Item
No.
Item Description
Indication Model
Qty
Is bid
compliant?
Bidder to
complete
1
☐ Yes ☐ No
Bidder to complete
(Insert details of goods
offered, including
specifications and
brand/model offered if
applicable)
Lot No 1: Furniture
1
Meeting Table Size 650×240×80 cm in Educational Building
Supply and install oval shape wooden meeting table of ply wood
or latte wood of thickness 28mm .Table top shall be easily to
clean laminate of a minimum 0.8mm thickness and is to be of
oval shape with oval opening size 470x60cm. Legs and
supporting wooden frame shall be solid beech, ply wood, latte
wood panels covered with Formica laminate with protective
coating . All edges shall be of solid Beech wood frame all
around. Table to be assembled at site with touch up paint as
needed. Table laminate, beech wood finish, color and coating
and assembly details shall be as per UNOPS Engineer
selection and approval.
2
Coffee Table
Supply and install a four legged wooden coffee table with
magazine rack. Table top shall be made of 18 mm thick latte
wood with Formica veneer. The coffee table size shall be as
described below. Top assembly shall be supported by 5.5 cm x
5.5 cm. All edges shall be of solid Beech wood frame all around.
Finish & colour shall be as per UNOPS selection. Attached
photo is indicative only.
3
(2-A) Coffee Table Size 60x60x50cm
4
☐ Yes ☐ No
(2-B) Coffee Table Size 50x50x50cm
27
☐ Yes ☐ No
Files/Books Cabinet for Manager Office
Supply and install wooden filling cabinet to match the manager
office furniture design, with high quality and unique design. The
size of the cabinet is 200 cm high, 180 cm wide and 40 cm
deep. The cabinet shall be latte wood 18 mm thick with painted
oak veneer finish. The cabinet shall be divided into: upper part –
110 cm high with three movable/adjustable shelves and 4 glass
doors with wooden frame in addition to high quality knobs and
locks. The lower part shall be 80 cm high with two
movable/adjustable shelves and high quality knobs and locks.
The lower base shall be 10 cm high and 2 cm thick. The back
shall be of 5 mm thick MDF with laminate matching other
wooden panels color, and the bottom shall be provided with
plastic cap nails according to the size of the cabinet. The
attached photo is indicative only.
4
38
☐ Yes ☐ No
100
☐ Yes ☐ No
Waiting & Library Chair
Supply and install chairs, metal part of the seat to be of powder
coated 1.5 mm thick pipes 22 mm diameter, and the chair back
is of 1.5 mm thick powder coated metal pipes of 19mm
diameter. All parts are to be properly welded together using
CO2, chamfered and sanded for a smooth finish. All metal ends
are to be closed using plastic caps. Plastic caps are to be
placed at the bottom of each leg. All seen metal parts to be
powder coated. Chair seat and back to be approved orthopedic
design with high quality foam covered with class A fabric. (Color
& texture shall be according to UNOPS selection).
The chair back is to be fixed inside pipes of 19mm diameter,
with anodized steel screws.
The chair base is to be fixed to the metal part using 4 screws.
Chair must support a weight of at least 200 Kg.
MCEC, Al-Ghabawi, Zarqa
☐ Yes ☐ No
Office Chair
Supply and install office chairs with high back and arm rests
and synchronized feature, with additional individual adjustment
and levelling mechanism of the entire upper part of the chair
towards the front (seat till up to -12 degrees) and towards the
rear backrest tilt up to 128 degrees. Chair seat and back to be
approved orthopedic design. The finishing is to be 100%
worsted wool fabric 530g/m2, colour shall be as per UNOPS
selection. All wheels are to be for hard floors. Chair must
support a weight of at least 200 Kg.
Seat base and parts to be all good quality metal, powder coated,
charcoal colour.
All as shown on the indicative drawing/photo.
5
2
1 of 10
MCEC
Furniture BOQ
UNOPS eSourcing v2016.1
Section II: Schedule of Requirements
eSourcing reference: ITB/2016/293
A. Summary of Requirements
UNOPS requirements are comprised of the following lots:
• Lot 1: Furniture
• Lot 2: Projectors & Supplies
• Lot 3: Household equipment
Item
No.
6
Item Description
Indication Model
36
☐ Yes ☐ No
2
☐ Yes ☐ No
30
☐ Yes ☐ No
Office Desk Size 160×80×75 cm
Supply and install wooden office desks, made from compressed
wood (MDF) 18mm thick. Table top should be easy to clean
laminate of a minimum 0.8mm thickness. All table parts (sides,
front and back) are to be MDF laminate with Formica veneer
and modesty panel in front as shown on drawings. Colors to be
as per UNOPS selection.
9-B
Ditto but for wooden side extension table on one side size 100
cm long x 45cm wide x 70cm high
30
9-C
Ditto but for wooden 3-drawers unit size 50cm long x 40cm wide
x 55cm high with multi lock key
30
10
Lecturer Desk Size 120×70×75 cm
Supply and install wooden lecturer desk made from compressed
wood (MDF) 18mm thick. Table top should be easy to clean
laminate of a minimum 0.8mm thickness. All desk parts (sides,
front and back) are to be MDF laminate with Formica veneer.
Price includes 2 wooden drawers with multi lock key as shown
on drawings and modesty panel in front. Color to be determined
by UNOPS Engineer.
MCEC, Al-Ghabawi, Zarqa
☐ Yes ☐ No
Manager Chair
Supply and install manager chair with resting arms and wheeled
base as shown on the photo. Chair seat and back to be
approved orthopedic design. The seat base and back should be
class A upholstery covered with genuine leather (Color
according to UNOPS Engineer's selection). The chair should be
with high back and arm rests and synchronized feature, with
additional individual adjustment and levelling mechanism of the
entire upper part of the chair towards the front (seat till up to -12
degrees) and towards the rear backrest tilt up to 128 degrees.
All wheels are to be for hard floors. Chair must support a weight
of at least 200 Kg.
9-A
11
Bidder to complete
(Insert details of goods
offered, including
specifications and
brand/model offered if
applicable)
Meeting Table Chair
Supply complete and install meeting table chair with resting
arms & wheeled base as shown on the photo. Chair seat and
back to be approved orthopedic design. The seat base and back
should be class A upholstery covered with leather (Color
according to UNOPS Engineer's selection). the chair should be
with high back and arm rests and synchronized feature, with
additional individual adjustment and levelling mechanism of the
entire upper part of the chair towards the front (seat till up to -12
degrees) and towards the rear backrest tilt up to 128 degrees.
Chair seat and back to be approved orthopedic design. All
wheels are to be for hard floors. Chair must support a weight of
at least 200 Kg.
8
Is bid
compliant?
Bidder to
complete
Guest Chair Type-2 (for Manager Room)
Supply and install chairs with resting arms as shown on photo.
Metal part of the seat to be of chromed 2 mm thick pipes 30 mm
diameter, and the chair back is of 1.5 mm thick chromed metal
pipes of 20mm diameter. All parts are to be properly welded
together using CO2, chamfered and sanded for a smooth finish.
All metal ends are to be closed using plastic caps. Anti-slip
plastic caps are to be provided at the bottom of leg frame. All
seen metal parts to be chrome plated. Chair must support a
weight of at least 200 Kg.
The seat is to be high quality foam covered with high quality
leather. (Color according to UNOPS selection).
The chair back is to be fixed inside pipes of 19mm diameter,
with chromed steel screws.
The chair base is to be fixed to the metal part using screws, and
using metal U Shaped stall.
All as indicated on photo.
7
Qty
6
2 of 10
☐ Yes ☐ No
MCEC
Furniture BOQ
UNOPS eSourcing v2016.1
Section II: Schedule of Requirements
eSourcing reference: ITB/2016/293
A. Summary of Requirements
UNOPS requirements are comprised of the following lots:
• Lot 1: Furniture
• Lot 2: Projectors & Supplies
• Lot 3: Household equipment
Item
No.
11
Item Description
Indication Model
170
☐ Yes ☐ No
15
☐ Yes ☐ No
2
☐ Yes ☐ No
Manager Office Desk Size 200×100×75 cm
Supply and install wooden office desks, made from compressed
wood (MDF) or latte wood 28mm thick. Table top should be
easy to clean laminate of a minimum 0.8mm thickness. All table
parts (sides, front and back) are to be MDF laminate with
Formica veneer at all exposed sides and modesty panel in front
as shown on drawings. Colors to be UNOPS selection.
MCEC, Al-Ghabawi, Zarqa
☐ Yes ☐ No
Guest Chair Type-1 / Leather Single Sofa
Supply and install single seat sofa made of leather. The seat
base, back and arms should be class A upholstery covered with
leather (Color according to UNOPS engineer's selection). the
sofa should be with low back and arm rests and synchronized
feature, with high quality frame and legs support. Sofa must
support a weight of at least 200 Kg.
14
150
Bidder to complete
(Insert details of goods
offered, including
specifications and
brand/model offered if
applicable)
Student Class Room Chair
Supply and install chairs with resting arms. Metal part of the
seat and resting arms to be of powder coated 1.25 mm thick
pipes 22 mm diameter, and the chair back is of 1.5 mm thick
powder coated metal pipes of 19mm diameter. All parts are to
be properly welded together using CO2, chamfered and sanded
for a smooth finish. All metal ends are to be closed using plastic
caps. Plastic caps are to be placed at the bottom of each leg. All
seen metal parts to be powder coated with black color.
The seat back, base and arms are to be high quality foam
covered with class A fabric. (Color and texture shall be
according to UNOPS selection).
The chair back is to be fixed inside pipes of 19mm diameter,
with anodized steel screws.
The chair base is to be fixed to the metal part using 4 screws,
and using metal U Shaped stall.
All as indicated on drawings. Chair must support a weight of at
least 200 Kg.
13
Is bid
compliant?
Bidder to
complete
Auditorium Fixed Seats
Supply and install fixed seats at Auditorium with foldable seat base,
high quality arm rests and foldable right hand writing pad and
synchronized feature as per attached specifications and drawings.
Chair seat and back to be approved orthopedic design. The finishing
is to be 100% worsted wool class A fabric , colour & pattern of
fabric shall be as per UNOPS Engineer's selection. Price shall
include seat support legs fixation to tiled floor with suitable
expansion bolts and all other accessories and requirements to
UNOPS Engineer satisfaction. Chair must support a weight of at
least 200 Kg.
Seat base and parts to be all metal, high quality powder coated,
colour and finish of UNOPS Engineer selection. Technical
Specifications for Auditorium Seats / Chairs
The Auditorium seats/chairs shall contain the following components:
1. Folding seat (Auto tip-up mechanism when not in use)
2. Push Back rest
3. Arm rest
4. Writing pad (right hand side of the chair)
Seat and back shall be made of foam with hot pressed plywood with
minimum thickness 12mm covered
with ABS.
Covering cloth is to be fabric.
Foldable writing pad of standard dimensions is to be provided in the
arm rest at right hand side.
Armrest is to be made of polyurethane or plastic injection moulded.
Legs are to be provided with bottom steel plates (bases) suitable for
fixing on tiled floor (porcelain tile)
with anchor bolts penetrating concrete slab and nuts.
Size Specifications (refer to attached drawing)
Seat foam thickness Minimum 50mm.
Back foam thickness Minimum 50mm.
Foam density 40 to 50Kg/m3
Base leg As per manufactures design / standard
Arms to Arms – inner 480 to 550mm (510mm preferable)
Seat 450 to 550mm x 450 to 550mm (Depth x Width)
Back 450mm minimum x 450 to 550mm (Height x Width)
Seat to Floor Height minimum 450mm
Back to Floor Height minimum 900mm (950mm preferable)
Arms to Floor Height minimum 630mm
12
Qty
14-B
Ditto but for wooden side extension table on one side size 120
cm long x 60cm wide x 70cm high
2
☐ Yes ☐ No
14-C
Ditto but for wooden 3-drawers unit size 60cm long x 50cm wide
x 55cm high with multi lock key
2
☐ Yes ☐ No
3 of 10
MCEC
Furniture BOQ
UNOPS eSourcing v2016.1
Section II: Schedule of Requirements
eSourcing reference: ITB/2016/293
A. Summary of Requirements
UNOPS requirements are comprised of the following lots:
• Lot 1: Furniture
• Lot 2: Projectors & Supplies
• Lot 3: Household equipment
Item
No.
15
16
Item Description
Indication Model
Manager Office Coffee Table Size 120cm long x 80cm wide
x 40cm high
Supply and install a four legged wooden coffee table with
magazine rack. Table top shall be made of 18 mm latte wood
with Formica veneer. The coffee table size shall be as described
above. All edges shall be of solid Beech wood frame 1 x 1 cm all
around. Top assembly shall be supported by 5.5 cm x 5.5 cm.
Finish & colour shall be as per UNOPS selection. Attached
photo is indicative only.
☐ Yes ☐ No
23
☐ Yes ☐ No
10
☐ Yes ☐ No
6
☐ Yes ☐ No
18
☐ Yes ☐ No
Books Cupboard with Shelves Size 100 x 40 x 200cm
Supply and install wooden books cupboard with (6) six shelves
of adjustable height made of 20 mm thick latte wood with a
minimum of 0.8mm thick Formica veneer at both sides. The
cupboard size shall be as described above. All edges of vertical
sides, top cover, bottom base boards and shelves shall be of
solid Beech wood frame 1 x 2 cm all around with sealer &
lacquer paint. Bottom base shall be raised by 6cm above floor
level with front cover of same wood panels. Back side shall be
6mm thick MDF panel with PVC veneer/laminate of matching
colour to the sides. Color and pattern of Formica veneer shall be
as per UNOPS selection. Attached photo is indicative only.
MCEC, Al-Ghabawi, Zarqa
23
Speech Stand Size 45D x 60W x 110-115H cm
Supply and install wooden stand made of 18 mm thick latte
wood with Formica veneer or painted oak veneer at both sides.
The stand size shall be as described above, and its shape
including intermediate fixed shelf of same latte wood as shown
in photo. All edges shall be of solid Beech wood frame 1 x 2 cm
all around coated with sealer and lacquer paint. Top base shall
be lower than the surrounding walls by 6 cm and provided with
solid Beech wood edge strip 2 x 2 cm at lower side coated with
sealer and lacquer paint. Finish & colour shall be as per UNOPS
selection. Attached photo is indicative only.
20
☐ Yes ☐ No
Guest Chair Type-3
Supply and install chairs with resting arms, metal part of the
seat and base to be of powder coated 2 mm thick pipes 30 mm
diameter, and the chair back is of 1.5 mm thick powder coated
metal pipes of 20mm diameter. All parts are to be properly
welded together using CO2, chamfered and sanded for a
smooth finish. All metal ends are to be closed using plastic
caps. Plastic caps are to be placed at the bottom of legs frame.
All seen metal parts to be powder coated with black color.
The seat is to be high quality foam covered with class A fabric.
(Color & texture shall be according to UNOPS selection).
The chair back is to be fixed inside pipes of 20mm diameter,
with anodized steel screws.
The chair base is to be fixed to the metal part using 4 screws.
Chair must support a weight of at least 200 Kg.
19
3
Bidder to complete
(Insert details of goods
offered, including
specifications and
brand/model offered if
applicable)
Office Filing Metal Cabinet
Supply and install Metal filling cabinet high quality as shown on
photo, size 100x45x180cm , with five shelves. Both doors to
have one latch and key lock. Closets to sit on 4, 10cm high tube
metal supports of matching colour of high quality powder
coating, colour to be chosen by UNOPS Engineer.
18
Is bid
compliant?
Bidder to
complete
Filing Drawers Metal Cabinet
Supply and install metal filing four drawers cabinets (colour as
selected by UNOPS) size D60xW47xH132cm with inside files
hangars, handle with label holder and multi locks as shown on
photo.
17
Qty
4 of 10
MCEC
Furniture BOQ
UNOPS eSourcing v2016.1
Section II: Schedule of Requirements
eSourcing reference: ITB/2016/293
A. Summary of Requirements
UNOPS requirements are comprised of the following lots:
• Lot 1: Furniture
• Lot 2: Projectors & Supplies
• Lot 3: Household equipment
Item
No.
21
Item Description
Indication Model
☐ Yes ☐ No
4
☐ Yes ☐ No
24
☐ Yes ☐ No
132
☐ Yes ☐ No
Dining Chair
Supply and install chairs, metal part of the seat to be of
chromed 1.5 mm thick pipes 22 mm diameter, and the chair
back is of 1.5 mm thick chromed metal pipes of 19mm
diameter. All parts are to be properly welded together using
CO2, chamfered and sanded for a smooth finish. All metal ends
are to be closed using plastic caps. Plastic caps are to be
placed at the bottom of each leg. All seen metal parts to be
chrome plated.
The seat base & back has to be class A high quality hygiene
plastic material of thickness 3-5 mm . (Color & shape shall be
according to UNOPS selection).
Chair must support a weight of 200 Kg.
MCEC, Al-Ghabawi, Zarqa
1
Dining Table Size 145×105×80 cm
Supply and install reading tables at the Library hall composed of
20mm thick latte wood top panel & metal frame for legs. Table top
shall be easy to clean laminate (Formica veneer) of a minimum
0.8mm thickness and to be of rectangular shape. All edges of
wooden panel shall be of solid Beech wood frame 1 x 2 cm all
around with sealer & lacquer paint. Legs and perimeter stiffeners
should be strong metal work design of steel square tubes size
40x40x2mm thick raised 15cm above floor level as shown on photo.
Metal works shall be painted with scratch resistant powder coating
with colour as per UNOPS selection. Legs shall have hard wearing
cap. All metal parts are to be properly welded with smooth finish.
Table to be arranged at site as per the layout shown in the attached
drawings.
25
☐ Yes ☐ No
Reading Table Size 200×100×75 cm
Supply and install reading tables at the Library hall composed of
20mm thick latte wood top panel & metal frame for legs. Table top
shall be easy to clean laminate (Formica veneer) of a minimum
0.8mm thickness and to be of rectangular shape. All edges of
wooden panel shall be of solid Beech wood frame 1 x 2 cm all
around with sealer & lacquer paint. Legs and perimeter stiffeners
should be strong metal work design of steel square tubes size
40x40x2mm thick raised 15cm above floor level as shown on photo.
Metal works shall be painted with scratch resistant powder coating
with colour as per UNOPS selection. Legs shall have hard wearing
cap. All metal parts are to be properly welded with smooth finish.
24
3
Bidder to complete
(Insert details of goods
offered, including
specifications and
brand/model offered if
applicable)
Metal Wardrobe
Supply and install Metal Wardrobe as shown on photo, size
130x60x200 cm with a 2mm thick metal divider panel in the
middle and two doors, four shelves for one side of the closet,
and clothes hanging section on the other part, with one top
shelf. Price to include 2cm dia pipe chrome coated for clothes
hangers. Both doors to have one latch and key lock. Front doors
to have ventilation holes. Closets to sit on 4, 10cm high tube
metal supports of matching color. Color will be powder coated
as per UNOPS selection.
23
Is bid
compliant?
Bidder to
complete
Single Metal Bed
Supply and install single metal bed size 90×190cm. Each bed
piece assembly shall be comprised of 9 metal parts and one
18mm thick perforated MDF wooden bed base covered with
PVC laminate at both sides. Metal for the beds to be made of
2.5mm thick tubes 25x60mm Each part shall be made from all
welded metal tubes, all other needed parts and assembly
fittings, welded together and are prepared for final assembly on
site. Welded parts shall be chamfered, smoothed and sanded
for a soft clean finish. All metal parts to be painted with high
quality powder coating of color selected by UNOPS. Final
assembly shall be carried out on site. No welding at site is
allowed in final assembly. work to include durable plastic caps
to cover all open sides of metal tubes and both ends of bed
posts. Price includes one 190x90cm mattress 20cm thick for
each bed, made from high density foam and internal springs
and heavy duty durable fabric cover as per UNOPS selection.
22
Qty
5 of 10
MCEC
Furniture BOQ
UNOPS eSourcing v2016.1
Section II: Schedule of Requirements
eSourcing reference: ITB/2016/293
A. Summary of Requirements
UNOPS requirements are comprised of the following lots:
• Lot 1: Furniture
• Lot 2: Projectors & Supplies
• Lot 3: Household equipment
Item
No.
26
Item Description
Indication Model
1
☐ Yes ☐ No
1
☐ Yes ☐ No
8
☐ Yes ☐ No
3
☐ Yes ☐ No
Heavy Duty Wheeled Mobile Trash Container 200 Gallons
Capacity With Hinged Lid / Cover
Supply & install wheeled Trashcan. This durable container shall
be made with shatterproof material that is capable of
withstanding severe weather conditions. These trash cans are
made with durable, shatterproof material long lasting
polyethylene resin. Leak-proof seamless plastic allows easy
cleaning and waste disposal. It shall be with a matching hinged
lid that has a special snap-fit design to help keep it secure. The
bottom of this industrial-strength trash is equipped with four
large heavy-duty wheels. A molded-in handle is located near the
top for pushing and pulling.
MCEC, Al-Ghabawi, Zarqa
☐ Yes ☐ No
Heavy Duty Wheeled Mobile Trash Container 50 Gallons
Capacity With Hinged Lid / Cover
Supply & install wheeled Trashcan. This durable container shall
be made with shatterproof material that is capable of
withstanding severe weather conditions. These trash cans are
made with durable, shatterproof material long lasting
polyethylene resin. Leak-proof seamless plastic allows easy
cleaning and waste disposal. It shall be with a matching hinged
lid that has a special snap-fit design to help keep it secure. The
bottom of this industrial-strength trash is equipped with a pair of
large heavy-duty wheels. A molded-in handle is located near the
top for pushing and pulling.
31
1
Metal Wardrobe
Supply and install Metal Wardrobe as shown on photo, size
60x45x180cm with a 2mm thick metal divider panel in the
middle and two doors, and clothes hanging section on the two
parts, with one top shelf. Price to include 2cm dia pipes chrome
coated for clothes hangers. Both doors to have one latch and
key lock. Front doors to have ventilation holes. Closets to sit on
4, 10cm high tube metal supports of matching color. Color will
be powder coated as per UNOPS selection.
30
☐ Yes ☐ No
Meeting Table Size 285×120×80 cm in Command Building
Supply and install oval shape wooden meeting table made of ply
wood or latte wood of thickness 28mm .Table top shall be easily
to clean laminate of a minimum 0.8mm thickness and is to be of
oval shape . Legs and supporting wooden frame shall be solid
beech wood, ply wood, latte wood panels covered with Formica
laminate with protective coating . All edges shall be of solid
Beech wood frame all around. Table to be assembled at site
with touch up paint as needed. Table laminate & beech wood
finish, color and coating and assembly details shall be as per
UNOPS Engineer selection and approval.
29
2
Bidder to complete
(Insert details of goods
offered, including
specifications and
brand/model offered if
applicable)
Dining Service Counter Size 350×50×80 cm
Supply and install wooden service counter made of latte wood of
thickness 18mm .Counter sides, top, base and partitions shall
be covered with easily to clean laminate of a minimum 0.8mm
thickness at both sides. Legs and supporting wooden frame
shall be latte wood panels covered with Formica laminate with
plastic headed nail for moisture protection. All edges shall be of
solid Beech wood frame 1x2cm all around with sealer & lacquer
paint. Counter to be assembled at site. Counter shall be
composed of 6 drawers with locks & knobs at top and 12 open
compartments (shelves & partitions) at the bottom as shown on
the indicative photo. Counter laminate & beech wood finish,
color and coating and assembly details shall be as per UNOPS
Engineer selection and approval.
Photo is indicative only.
28
Is bid
compliant?
Bidder to
complete
Dexion Shelving ( Metal Frame )
Over all Size 300Lx50Wx250H cm
Supply and install heavy duty metal shelving to form overall size
described above. Shelving frames shall be made of heavy duty
steel profiles spaced at 100cm. The frames shall be thermally
powder coated (blue color). The supplier shall provide sample
for the Engineer's approval. The works shall include the main
supporting frame made of heavy duty steel tubes 2 mm thick,
can support at least 100 kg/lm in weight per shelf (500Kg for 5
shelves). The main frame shall be braced with steel profile of
suitable size at all ends. The price shall include the supply and
installation of heavy duty steel shelves size 100x50 cm and 0.9
mm thickness at 5 levels. The shelves shall be thermally painted
with grey color powder coating paint. All works shall be
according to approved sample and the instructions of the
UNOPS Engineer.
27
Qty
6 of 10
MCEC
Furniture BOQ
UNOPS eSourcing v2016.1
Section II: Schedule of Requirements
eSourcing reference: ITB/2016/293
A. Summary of Requirements
UNOPS requirements are comprised of the following lots:
• Lot 1: Furniture
• Lot 2: Projectors & Supplies
• Lot 3: Household equipment
Item
No.
32-A
32-B
Item Description
Indication Model
Is bid
compliant?
Bidder to
complete
Bidder to complete
(Insert details of goods
offered, including
specifications and
brand/model offered if
applicable)
Polypropylene Carpet Flooring for Auditorium Area (Option1)
supply and install Polypropylene carpet flooring as per the attached
specifications for the Auditorium area including steps below seats
and stage area on top of existing porcelain floor tile as shown on the
attached drawings. The price shall include the adhesive, Aluminum
edge strips where needed and all other accessories to complete the
works to UNOPS Engineer satisfaction. The colour, pattern and
texture will be selected by UNOPS.
Shop drawing shall be submitted for UNOPS Engineer approval
prior to fixing carpet at site. C-2 Polypropylene Carpet
Specifications for Auditorium Flooring
• Material: 100% Polypropylene
• Style: Rib
• Pattern: Loop Pile
• Design: high low loop
• Technics: Machine tufted
• Use: Auditoriums
• Pile height: 6mm
• Pile weight: 700g/sqm
Packaging & Delivery
Packaging Details: Packed in rolls with PVC bag wrapped
Specifications
1. Polypropylene carpet
2. Auditorium carpet
3. Flooring carpet
4. OEM accepted
Advantage
1. Fireproof: Astm D 2859 and Bs 4790,
2. Static Control: Aatcc-134 Under 3.0 Kv
3. Stain resistant
4.Sound proof
5. High level abrasion proof
6. Stability: B S En 986 < 0,2%
7.Structure: loop pile
8. Technology : Tufted carpet.
Specification
1.Yarn : 100% PP wall to wall floor carpet
2.Color: UNOPS Selection .
3.Size: Manufacturer standard
4.Pile height: 3.5-6mm
5.Back PP
6.Gule BSF
7.OEM Accepted Yes
8.Certification required: Yes
PVC Vinyl Flooring for Auditorium Area
(Option-2)
☐ Yes ☐ No
250
supply and install PVC Vinyl flooring as per the attached
specifications for the Auditorium area including steps below seats
and stage area on top of existing porcelain floor tile as shown on the
attached drawings. The price shall include the adhesive, waxing,
Aluminum/PVC edge strips where needed and all other accessories
needed to complete the works to UNOPS Engineer satisfaction. The
colour, pattern and texture will be selected by UNOPS. Type: Plastic
Flooring, Auditorium Flooring
Material: PVC, 100% pure polyethylene
Usage: Indoor, indoor sports
Surface Treatment: Simple Color
Color: UNOPS Selection
Overall thickness: 4.5mm
Surface Patterns: UNOPS Selection
Advantage: Anti-bacterial
extreme long life of usage: at least 10 years
Function: Comfort foot feeling
Packaging
Packaging Details:
Paper tube inside and waterproof kraft paper covered for PVC
Sports Flooring In Roll
Specifications
Different Pattern PVC Auditorium Flooring
1. UV Protection
2. Waterproof
3. Wear resisting
4. Excellent stability
Auditorium Flooring
Different Pattern PVC Auditorium Flooring
Materials:
The materials of Vinyl flooring are to be virgin materials (not
recycled materials) to make sure the high
quality of floors.
Test Reports:
PVC floor has to passed the test by International Centres for Quality
Supervision and Test of
Environment Protection Products
Advantages to be considered
1) Mobile installation, easy cleaning and comfortable feeling.
2) Color shall be as per UNOPS Engineer requirement
3) PVC floor is 100% pure pvc material instead of recycled
materials
The impulse effect posed by exercising produces vibration on the
PVC plastic rubber floor.
The floor configuration must be provided with the function of
absorbing vibration. That is to say, the
floor should possess the capacity of absorbing the bumping energy.
Package:
Supplier standard
Shop drawing shall be submitted for UNOPS Engineer approval
prior to fixing carpet at site.
MCEC, Al-Ghabawi, Zarqa
Qty
250
7 of 10
☐ Yes ☐ No
MCEC
Furniture BOQ
UNOPS eSourcing v2016.1
Section II: Schedule of Requirements
eSourcing reference: ITB/2016/293
A. Summary of Requirements
UNOPS requirements are comprised of the following lots:
• Lot 1: Furniture
• Lot 2: Projectors & Supplies
• Lot 3: Household equipment
Item
No.
Item Description
Indication Model
Qty
Is bid
compliant?
Bidder to
complete
6
☐ Yes ☐ No
Bidder to complete
(Insert details of goods
offered, including
specifications and
brand/model offered if
applicable)
Lot No 2: Projectors & Supplies
33
Data Show / Projectors
Supply, install at the specified locations , testing and
commissioning of Data Shows including all necessary
accessories to the satisfaction of UNOPS Engineer as per the
attached specifications
(20-A) Type-1 for Class Rooms as per below specifications
including suspension bracket below false ceiling.
C-1 :Data Show smart LED projector Specifications
1) Data Show Type-1 (For Class Rooms)
Technology
Display technology DLP Smart Engine
Light Source RGB LED
LED light sources last over 30,000 hours
Brightness up to 350 Lumen
Contrast ratio 100.000:1
Resolution 1280 x 720 pixel
Throw ratio 1,47
Screen size (diagonal) 38 – 381 cm (15” – 150”)
Screen distance 50 cm – 500 cm (19" – 197")
Aspect ratio 16:9
Projection modes front; rear; front ceiling; rear ceiling
Wall colour correction white; yellow; pink; green; blue
Keystone correction manual
Focus adjustment manual
Internal memory 1 GB
Noise level < 28 dB
Operating system Android 4.4
Touchpad for easy navigation without remote control
Sound
Built-in speakers 3 Watt
Supported music formats MP3, WAV
Connection
Wi-Fi Wi-Fi IEEE 802.11 b/g/n
DLNA support
Bluetooth® audio aptX® audio codec for pure wireless sound
Connectivity micro-USB: USB OTG support access internal memory
HDMI: mini HDMI with HDCP
External Memory: micro SD / SDHC / SDXC /USB
Output audio: 3.5 mm audio out jack for headphones
Internal media player
Supported video formats .vob, .dat: MPEG-1, MPEG-2 .avi, .mkv:
MJPEG, MPEG-1,
MPEG-2, H.264, Divx, Xvid, H.265/HEVC .mov, .mp4: MJPEG,
MPEG-4,
H.264, H.265/HEVC .flv H.263 .3gp H.264 .mts AVCHD
Supported photo formats JPG, BMP
Supported document formats pdf , ppt/pptx , xls/xlsx , doc/docx
Power Source
Battery Internal battery: 2000 mAh / 7.4 V
Battery life
Optimal mode 1,5 hours
Eco mode: 2 hours
2
Logistic data
Temperature range
Operation: 5 – 35° C
Relative humidity Operation: 15 – 85 % RH
Standard package includes Quick start guide, Warranty card, mini
HDMI to HDMI cable
Power supply, Carrying Case, Remote control
MCEC, Al-Ghabawi, Zarqa
8 of 10
MCEC
Furniture BOQ
UNOPS eSourcing v2016.1
Section II: Schedule of Requirements
eSourcing reference: ITB/2016/293
A. Summary of Requirements
UNOPS requirements are comprised of the following lots:
• Lot 1: Furniture
• Lot 2: Projectors & Supplies
• Lot 3: Household equipment
Item
No.
Item Description
Indication Model
(20-B) Type-2 for Meeting Room & Auditorium as per below
specifications
2) Data Show Type-2 (For Auditorium & Meeting Room)
smart LED projector
Technology
Display technology DLP
Light Source RGB LED
LED light sources last over 30,000 hours
Contrast ratio 100,000:1
Resolution 1280 x 800 pixel
Throw ratio 0,321
Screen size 50”–100”
Screen distance from device backside 10–44 cm
Keystone correction Yes
Aspect ratio 4:3 and 16:9
Projection modes front, rear, front ceiling, rear ceiling
Wall colour correction yes
Focus adjustment manual
3D Technology converts 2D in 3D, supports all 3D modes
MP4 player
Operating system Android 4.2
Internal memory 4 GB
Noise level < 25 dB(A)
Supported formats/ resolutions PAL (50Hz)/SECAM (50Hz)/
NTSC (60Hz)/480i/p/576i/p/720p/1080p
Sound
Built-in speakers 2 + subwoofer
Output power 26 W
Sound System Dolby Digital 2.1
Connection
Wi-Fi
WLAN IEEE 802.11 b/g/n
Dual band 2.4GHz and 5GHz
Wireless media player to connect to other devices
DLNA
Miracast
Bluetooth Stream music from smartphone or tablet to Screeneo via
Bluetooth
Connect to external Bluetooth speakers
Connectivity 2x back HDMI, 1 front HDMI, VGA,
Composite, 2x back Standard
USB, 1x front Standard USB,
Headphone out front, Standard SD card, Audio out (analogue,
digital), Ethernet (LAN)
Internal media player
Supported video formats .avi/. mov/.mp4/.mkv/.flv/.ts/.m2ts/.3gp
Supported music formats mp3, wav
Power consumption Operation: 150 W max.
Eco-Mode: ˜1 W
4
Power off: <0.5 W
Power supply Power adapter 90V–264V, 47–63HZ for EU and UK
Temperature range Operation: 5–35° C
Relative humidity Operation: 15–85% RH
Standard package includes User guide: stored on internal memory,
internet Quick start guide
Power cable HDMI cable, Air Mouse remote control, 2x AAA battery,
DLP Link 3D glasses,
Carrying bag, Warranty card
34
Qty
Is bid
compliant?
Bidder to
complete
2
☐ Yes ☐ No
7
☐ Yes ☐ No
1
☐ Yes ☐ No
100
☐ Yes ☐ No
Bidder to complete
(Insert details of goods
offered, including
specifications and
brand/model offered if
applicable)
Scroll Screens for Data Show / Projectors
Supply and install at the specified locations white colour drop
down scroll screens including all necessary fixing accessories to
have the work complete to the satisfaction of UNOPS Engineer
as per the locations shown on the attached drawings
(21-A) for Class Rooms & Meeting Rooms
Size 240x150cm
(21-B) for Auditorium
Size 500x300cm
35
Pedal Trash Bin
Supply and install plastic pedal trash bin 10 Litre capacity for
offices, class rooms, meeting rooms, dining halls,
accommodation, kitchens and toilets. Trash Bin to have a cover
with a hinge, and open step as per photo
MCEC, Al-Ghabawi, Zarqa
9 of 10
MCEC
Furniture BOQ
UNOPS eSourcing v2016.1
Section II: Schedule of Requirements
eSourcing reference: ITB/2016/293
A. Summary of Requirements
UNOPS requirements are comprised of the following lots:
• Lot 1: Furniture
• Lot 2: Projectors & Supplies
• Lot 3: Household equipment
Item
No.
Item Description
Indication Model
Qty
Is bid
compliant?
Bidder to
complete
1
☐ Yes ☐ No
1
☐ Yes ☐ No
Bidder to complete
(Insert details of goods
offered, including
specifications and
brand/model offered if
applicable)
Lot No 3: Household equipments
36
Heavy Duty Refrigerator
supply and install heavy duty refrigerator of 1330 Liter chilling
capacity as per below specifications. Photo is indicative only.
C-5 Specification of Refrigerator Vertical Double Doors
• AISI-304 18/10 stainless steel exterior, except the rear side
• AISI-304 18/10 stainless steel interior, stamped bottom and
rounded corners
• Doors with self-closing system, blocked opening, magnetic gasket
and possibility of changing the
opening sense
• Key lock as standard
• Rear-door by stamped steel
• Interior lighting
• Shelves: 6 shelves and 6 sets of slides
• GN 2/1 shelves made of plasticized steel wire, height adjustable
• AISI -304 18/10 adjustable legs, 125 to 200 mm
• Control panel and engine ventilation grill, removable
• COMPACT refrigeration system: condenser unit + evaporator
• Fan assisted condenser unit
• Fan assisted evaporator, with anticorrosion coating
• Evaporator fan stops when door is opened
• Automatic evaporation of defrost water
• 40 Kg/m³ density polyurethane insulation, low GWP and zero ODP
effect
• Energy efficient digital controller of temperature and defrosts
• Operating temperature 32°C ambient
• Chilling Capacity: 1330 Litres
• Model: CGR-1002-S
• Dim : 139*80*212 cm minimum
• Brand : Well-known International brand of high quality
37
Heavy Duty Gas Cooker with Oven
supply and install heavy duty Gas Cooker with Oven Size
120x90x90 cm as per the attached specifications. Price shall
include the supply and installation of hose, regulator gauge and two
filled Gas Cylinders of 16Kg capacity each at specified location on
the attached drawing. Photo is indicative only.
Worktop, front and side panels made of AISI 304 stainless steel.
• Inside AISI 430Cast iron burners with thermocouple safety valve
and protected pilot flame with
regulation up to 3.5 kW on the 80 mm version, regulation up to 7
kW on the 108 mm version and
regulation up to12 kW on the 130 mm version.
• Gas oven with self-stabilized flame burner positioned under the
steel ribbed base and adjustable
thermostat from 160° to 280°.
• Oven chamber from AISI 430 with 4-level supports. Internal
chimney from AISI 304 stainless steel
and burners support from AISI 430 stainless steel.
• High resistance and double-pressed handles from AISI 304
stainless steel of 20/10 thickness.
• Full Safety
• Model G9F6+T
• Dim : 120x90x90 cm
• Brand : Well-known International brand of high quality
MCEC, Al-Ghabawi, Zarqa
10 of 10
MCEC
Furniture BOQ
Download PDF
Similar pages