Version Control with Subversion

Version Control with Subversion
For Subversion 1.3
(book compiled from Revision 2494)
Ben Collins-Sussman
Brian W. Fitzpatrick
C. Michael Pilato
Version Control with Subversion: For Subversion 1.3: (book
compiled from Revision 2494)
by Ben Collins-Sussman, Brian W. Fitzpatrick, and C. Michael Pilato
Published (TBA)
Copyright © 2002, 2003, 2004, 2005, 2006 Ben Collins-SussmanBrian W. FitzpatrickC. Michael Pilato
This work is licensed under the Creative Commons Attribution License. To view a copy of this license, visit http://creativecommons.org/licenses/by/2.0/ or send a letter to Creative Commons, 559 Nathan Abbott Way, Stanford, California
94305, USA.
Table of Contents
Foreword .................................................................................................................. xi
Preface ................................................................................................................... xiii
Audience ........................................................................................................ xiii
How to Read this Book ..................................................................................... xiii
Conventions Used in This Book .......................................................................... xiv
Typographic Conventions .......................................................................... xiv
Icons ..................................................................................................... xiv
Organization of This Book .................................................................................. xv
This Book is Free ............................................................................................. xvi
Acknowledgments ............................................................................................ xvi
From Ben Collins-Sussman ....................................................................... xvii
From Brian W. Fitzpatrick ........................................................................ xvii
From C. Michael Pilato ............................................................................ xvii
1. Introduction ............................................................................................................ 1
What is Subversion? ............................................................................................ 1
Subversion's History ............................................................................................ 1
Subversion's Features ........................................................................................... 2
Subversion's Architecture ..................................................................................... 3
Installing Subversion ........................................................................................... 4
Subversion's Components ..................................................................................... 5
A Quick Start ..................................................................................................... 5
2. Basic Concepts ........................................................................................................ 8
The Repository ................................................................................................... 8
Versioning Models .............................................................................................. 8
The Problem of File-Sharing ......................................................................... 9
The Lock-Modify-Unlock Solution ................................................................. 9
The Copy-Modify-Merge Solution ............................................................... 11
Subversion in Action ......................................................................................... 13
Working Copies ........................................................................................ 13
Revisions ................................................................................................. 16
How Working Copies Track the Repository ................................................... 17
Mixed Revision Working Copies .................................................................. 18
Summary ......................................................................................................... 19
3. Guided Tour ......................................................................................................... 20
Help! .............................................................................................................. 20
Import ............................................................................................................. 20
Revisions: Numbers, Keywords, and Dates, Oh My! ................................................ 20
Revision Numbers ..................................................................................... 20
Revision Keywords ................................................................................... 21
Revision Dates ......................................................................................... 22
Initial Checkout ................................................................................................ 23
Basic Work Cycle ............................................................................................. 25
Update Your Working Copy ........................................................................ 25
Make Changes to Your Working Copy .......................................................... 26
Examine Your Changes .............................................................................. 27
Resolve Conflicts (Merging Others' Changes) ................................................. 33
Commit Your Changes ............................................................................... 36
Examining History ............................................................................................ 37
svn log .................................................................................................... 38
svn diff ................................................................................................... 39
svn cat .................................................................................................... 41
svn list .................................................................................................... 41
A Final Word on History ............................................................................ 42
iv
Version Control with Subversion
Other Useful Commands .................................................................................... 42
svn cleanup ............................................................................................. 42
svn import .............................................................................................. 43
Summary ......................................................................................................... 43
4. Branching and Merging .......................................................................................... 44
What's a Branch? .............................................................................................. 44
Using Branches ................................................................................................ 44
Creating a Branch ..................................................................................... 46
Working with Your Branch ......................................................................... 48
The Key Concepts Behind Branches ............................................................. 50
Copying Changes Between Branches .................................................................... 50
Copying Specific Changes .......................................................................... 51
The Key Concept Behind Merging ............................................................... 53
Best Practices for Merging .......................................................................... 54
Common Use-Cases .......................................................................................... 57
Merging a Whole Branch to Another ............................................................. 57
Undoing Changes ...................................................................................... 59
Resurrecting Deleted Items ......................................................................... 60
Common Branching Patterns ....................................................................... 61
Switching a Working Copy ................................................................................. 63
Tags ............................................................................................................... 65
Creating a Simple Tag ................................................................................ 65
Creating a Complex Tag ............................................................................. 65
Branch Maintenance .......................................................................................... 66
Repository Layout ..................................................................................... 66
Data Lifetimes .......................................................................................... 67
Summary ......................................................................................................... 68
5. Repository Administration ....................................................................................... 69
Repository Basics .............................................................................................. 69
Understanding Transactions and Revisions ..................................................... 69
Unversioned Properties .............................................................................. 70
Repository Data Stores ............................................................................... 70
Repository Creation and Configuration .................................................................. 72
Hook Scripts ............................................................................................ 74
Berkeley DB Configuration ......................................................................... 77
Repository Maintenance ..................................................................................... 77
An Administrator's Toolkit .......................................................................... 77
Repository Cleanup ................................................................................... 85
Managing Disk Space ................................................................................ 87
Repository Recovery ................................................................................. 89
Migrating a Repository ............................................................................... 90
Repository Backup .................................................................................... 93
Adding Projects ................................................................................................ 95
Choosing a Repository Layout ..................................................................... 95
Creating the Layout, and Importing Initial Data .............................................. 96
Summary ......................................................................................................... 97
6. Server Configuration .............................................................................................. 98
Overview ......................................................................................................... 98
Network Model ................................................................................................ 99
Requests and Responses ............................................................................. 99
Client Credentials Caching .......................................................................... 99
svnserve, a custom server ................................................................................. 101
Invoking the Server ................................................................................. 101
Built-in authentication and authorization ...................................................... 103
SSH authentication and authorization .......................................................... 105
SSH configuration tricks ........................................................................... 106
httpd, the Apache HTTP server .......................................................................... 108
Prerequisites .......................................................................................... 108
v
Version Control with Subversion
Basic Apache Configuration ......................................................................
Authentication Options ............................................................................
Authorization Options ..............................................................................
Extra Goodies .........................................................................................
Supporting Multiple Repository Access Methods ..................................................
7. Advanced Topics .................................................................................................
Runtime Configuration Area .............................................................................
Configuration Area Layout .......................................................................
Configuration and the Windows Registry .....................................................
Configuration Options ..............................................................................
Properties ......................................................................................................
Why Properties? .....................................................................................
Manipulating Properties ...........................................................................
Special Properties ....................................................................................
Automatic Property Setting .......................................................................
Locking .........................................................................................................
Creating locks ........................................................................................
Discovering locks ....................................................................................
Breaking and stealing locks .......................................................................
Lock Communication ...............................................................................
Peg and Operative Revisions .............................................................................
Externals Definitions .......................................................................................
Vendor branches .............................................................................................
General Vendor Branch Management Procedure ...........................................
svn_load_dirs.pl ....................................................................................
Localization ...................................................................................................
Understanding locales ..............................................................................
Subversion's use of locales ........................................................................
Using External Differencing Tools .....................................................................
External diff ...........................................................................................
External diff3 .........................................................................................
Subversion Repository URLs ............................................................................
8. Developer Information ..........................................................................................
Layered Library Design ....................................................................................
Repository Layer ....................................................................................
Repository Access Layer ..........................................................................
Client Layer ...........................................................................................
Using the APIs ...............................................................................................
The Apache Portable Runtime Library ........................................................
URL and Path Requirements .....................................................................
Using Languages Other than C and C++ ......................................................
Inside the Working Copy Administration Area ......................................................
The Entries File ......................................................................................
Pristine Copies and Property Files ..............................................................
WebDAV ......................................................................................................
Programming with Memory Pools ......................................................................
Contributing to Subversion ...............................................................................
Join the Community ................................................................................
Get the Source Code ................................................................................
Become Familiar with Community Policies ..................................................
Make and Test Your Changes ....................................................................
Donate Your Changes ..............................................................................
9. Subversion Complete Reference .............................................................................
The Subversion Command Line Client: svn .........................................................
svn Switches ..........................................................................................
svn Subcommands ..................................................................................
svnadmin ......................................................................................................
svnadmin Switches .................................................................................
vi
109
111
114
119
121
123
123
123
124
125
129
130
130
134
141
142
143
145
146
148
149
152
154
155
156
158
158
158
159
160
161
162
164
164
165
169
172
173
173
173
174
177
178
179
179
180
182
182
183
183
184
184
185
185
185
188
250
250
Version Control with Subversion
svnadmin Subcommands .........................................................................
svnlook .........................................................................................................
svnlook Switches ....................................................................................
svnlook .................................................................................................
svnserve .......................................................................................................
svnserve Switches ...................................................................................
svnversion ....................................................................................................
mod_dav_svn ................................................................................................
Subversion properties .......................................................................................
A. Subversion for CVS Users ....................................................................................
Revision Numbers Are Different Now .................................................................
Directory Versions ..........................................................................................
More Disconnected Operations ..........................................................................
Distinction Between Status and Update ...............................................................
Status ....................................................................................................
Update ..................................................................................................
Branches and Tags ..........................................................................................
Metadata Properties .........................................................................................
Conflict Resolution .........................................................................................
Binary Files and Translation ..............................................................................
Versioned Modules .........................................................................................
Authentication ................................................................................................
Converting a Repository from CVS to Subversion .................................................
B. WebDAV and Autoversioning ...............................................................................
Basic WebDAV Concepts .................................................................................
Original WebDAV ..................................................................................
DeltaV Extensions ...................................................................................
Subversion and DeltaV .....................................................................................
Autoversioning ...............................................................................................
Client Interoperability ......................................................................................
Standalone WebDAV applications ..............................................................
File-explorer WebDAV extensions .............................................................
WebDAV filesystem implementation ..........................................................
C. Third Party Tools ................................................................................................
D. Copyright ..........................................................................................................
vii
251
268
268
269
285
285
286
288
289
292
292
292
293
293
293
294
295
295
295
295
296
296
296
298
298
298
299
299
300
301
302
303
305
306
307
List of Figures
1.1. Subversion's Architecture ....................................................................................... 3
2.1. A typical client/server system .................................................................................. 8
2.2. The problem to avoid ............................................................................................. 9
2.3. The lock-modify-unlock solution ............................................................................ 10
2.4. The copy-modify-merge solution ............................................................................ 11
2.5. The copy-modify-merge solution (continued) ........................................................... 12
2.6. The repository's filesystem .................................................................................... 13
2.7. The repository .................................................................................................... 16
4.1. Branches of development ...................................................................................... 44
4.2. Starting repository layout ...................................................................................... 45
4.3. Repository with new copy ..................................................................................... 47
4.4. The branching of one file's history .......................................................................... 48
8.1. Files and directories in two dimensions .................................................................. 166
8.2. Versioning time—the third dimension! .................................................................. 167
viii
List of Tables
2.1. Repository Access URLs ...................................................................................... 15
5.1. Repository Data Store Comparison ......................................................................... 70
6.1. Network Server Comparison .................................................................................. 98
8.1. A Brief Inventory of the Subversion Libraries ......................................................... 164
B.1. Common WebDAV Clients ................................................................................ 302
ix
List of Examples
5.1. txn-info.sh (Reporting Outstanding Transactions) ...................................................... 87
6.1. A sample configuration for anonymous access. ....................................................... 115
6.2. A sample configuration for authenticated access. ..................................................... 116
6.3. A sample configuration for mixed authenticated/anonymous access. ........................... 116
6.4. Disabling path checks altogether .......................................................................... 119
7.1. Sample Registration Entries (.reg) File. ................................................................. 124
7.2. diffwrap.sh ....................................................................................................... 161
7.3. diffwrap.bat ..................................................................................................... 161
7.4. diff3wrap.sh ..................................................................................................... 162
7.5. diff3wrap.bat .................................................................................................... 162
8.1. Using the Repository Layer ................................................................................. 168
8.2. Using the Repository Layer with Python ................................................................ 174
8.3. A Python Status Crawler ..................................................................................... 176
8.4. Contents of a Typical .svn/entries File .......................................................... 178
8.5. Effective Pool Usage .......................................................................................... 181
x
Foreword
A bad Frequently Asked Questions (FAQ) sheet is one that is composed not of the questions people actually asked, but of the questions the FAQ's author wished people had asked. Perhaps you've seen the
type before:
Q: How can I use Glorbosoft XYZ to maximize team productivity?
A: Many of our customers want to know how they can maximize productivity through
our patented office groupware innovations. The answer is simple: first, click on the
“File” menu, scroll down to “Increase Productivity”, then…
The problem with such FAQs is that they are not, in a literal sense, FAQs at all. No one ever called the
tech support line and asked, “How can we maximize productivity?”. Rather, people asked highly specific questions, like, “How can we change the calendaring system to send reminders two days in advance
instead of one?” and so on. But it's a lot easier to make up imaginary Frequently Asked Questions than it
is to discover the real ones. Compiling a true FAQ sheet requires a sustained, organized effort: over the
lifetime of the software, incoming questions must be tracked, responses monitored, and all gathered into
a coherent, searchable whole that reflects the collective experience of users in the wild. It calls for the
patient, observant attitude of a field naturalist. No grand hypothesizing, no visionary pronouncements
here—open eyes and accurate note-taking are what's needed most.
What I love about this book is that it grew out of just such a process, and shows it on every page. It is
the direct result of the authors' encounters with users. It began with Ben Collins-Sussman's observation
that people were asking the same basic questions over and over on the Subversion mailing lists: What
are the standard workflows to use with Subversion? Do branches and tags work the same way as in other
version control systems? How can I find out who made a particular change?
Frustrated at seeing the same questions day after day, Ben worked intensely over a month in the summer
of 2002 to write The Subversion Handbook, a sixty page manual that covered all the basics of using Subversion. The manual made no pretense of being complete, but it was distributed with Subversion and got
users over that initial hump in the learning curve. When O'Reilly and Associates decided to publish a
full-length Subversion book, the path of least resistance was obvious: just expand the Subversion handbook.
The three co-authors of the new book were thus presented with an unusual opportunity. Officially, their
task was to write a book top-down, starting from a table of contents and an initial draft. But they also
had access to a steady stream—indeed, an uncontrollable geyser—of bottom-up source material. Subversion was already in the hands of thousands of early adopters, and those users were giving tons of feedback, not only about Subversion, but about its existing documentation.
During the entire time they wrote this book, Ben, Mike, and Brian haunted the Subversion mailing lists
and chat rooms incessantly, carefully noting the problems users were having in real-life situations. Monitoring such feedback is part of their job descriptions at CollabNet anyway, and it gave them a huge advantage when they set out to document Subversion. The book they produced is grounded firmly in the
bedrock of experience, not in the shifting sands of wishful thinking; it combines the best aspects of user
manual and FAQ sheet. This duality might not be noticeable on a first reading. Taken in order, front to
back, the book is simply a straightforward description of a piece of software. There's the overview, the
obligatory guided tour, the chapter on administrative configuration, some advanced topics, and of course
a command reference and troubleshooting guide. Only when you come back to it later, seeking the solution to some specific problem, does its authenticity shine out: the telling details that can only result from
encounters with the unexpected, the examples honed from genuine use cases, and most of all the sensitivity to the user's needs and the user's point of view.
Of course, no one can promise that this book will answer every question you have about Subversion.
xi
Foreword
Sometimes, the precision with which it anticipates your questions will seem eerily telepathic; yet occasionally, you will stumble into a hole in the community's knowledge, and come away empty-handed.
When this happens, the best thing you can do is email <users@subversion.tigris.org> and
present your problem. The authors are still there, still watching, and they include not just the three listed
on the cover, but many others who contributed corrections and original material. From the community's
point of view, solving your problem is merely a pleasant side effect of a much larger project—namely,
slowly adjusting this book, and ultimately Subversion itself, to more closely match the way people actually use it. They are eager to hear from you not merely because they can help you, but because you can
help them. With Subversion as with all active free software projects, you are not alone.
Let this book be your first companion.
— Karl Fogel, Chicago, 14 March, 2004
xii
Preface
“If C gives you enough rope to hang yourself, think of Subversion as a sort of rope
storage facility.”
—Brian W. Fitzpatrick
In the world of open-source software, the Concurrent Versions System (CVS) has long been the tool of
choice for version control. And rightly so. CVS itself is free software, and its non-restrictive modus operandi and support for networked operation—which allow dozens of geographically dispersed programmers to share their work—fits the collaborative nature of the open-source world very well. CVS and its
semi-chaotic development model have become cornerstones of open-source culture.
But like many tools, CVS is starting to show its age. Subversion is a relatively new version control system designed to be the successor to CVS. The designers set out to win the hearts of CVS users in two
ways: by creating an open-source system with a design (and “look and feel”) similar to CVS, and by attempting to fix most of CVS's noticeable flaws. While the result isn't necessarily the next great evolution
in version control design, Subversion is very powerful, very usable, and very flexible.
This book is written to document the 1.3 series of the Subversion version control system. We have made
every attempt to be thorough in our coverage. However, Subversion has a thriving and energetic development community, so there are already a number of features and improvements planned for future versions of Subversion that may change some of the commands and specific notes in this book.
Audience
This book is written for computer-literate folk who want to use Subversion to manage their data. While
Subversion runs on a number of different operating systems, its primary user interface is command-line
based. It is that command-line tool (svn) which is discussed and used in this book. For consistency, the
examples in this book assume the reader is using a Unix-like operating system, and is relatively comfortable with Unix and command-line interfaces.
That said, the svn program also runs on non-Unix platforms like Microsoft Windows. With a few minor
exceptions, such as the use of backward slashes (\) instead of forward slashes (/) for path separators,
the input to and output from this tool when run on Windows are identical to its Unix counterpart.
However, Windows users may find more success by running the examples inside the Cygwin Unix emulation environment.
Most readers are probably programmers or system administrators who need to track changes to source
code. This is the most common use for Subversion, and therefore it is the scenario underlying all of the
book's examples. But Subversion can be used to manage changes to any sort of information: images,
music, databases, documentation, and so on. To Subversion, all data is just data.
While this book is written with the assumption that the reader has never used version control, we've also
tried to make it easy for users of CVS to make a painless leap into Subversion. Special sidebars may discuss CVS from time to time, and a special appendix summarizes most of the differences between CVS
and Subversion.
How to Read this Book
This book aims to be useful to people of widely different backgrounds—from people with no previous
experience in version control to experienced system administrators. Depending on your own background, certain chapters may be more or less important to you. The following can be considered a
“recommended reading list” for various types of readers:
xiii
Preface
Experienced System Administrators
The assumption here is that you've probably used CVS before, and are dying to get a Subversion
server up and running ASAP. Chapter 5, Repository Administration and Chapter 6, Server Configuration will show you how to create your first repository and make it available over the network.
After that's done, Chapter 3, Guided Tour and Appendix A, Subversion for CVS Users are the fastest routes to learning the Subversion client while drawing on your CVS experience.
New users
Your administrator has probably set up Subversion already, and you need to learn how to use the
client. If you've never used a version control system (like CVS), then Chapter 2, Basic Concepts
and Chapter 3, Guided Tour are a vital introduction. If you're already an old hand at CVS, chapter 3
and appendix A are the best place to start.
Advanced users
Whether you're a user or administrator, eventually your project will grow larger. You're going to
want to learn how to do more advanced things with Subversion, such as how to use branches and
perform merges (Chapter 4, Branching and Merging), how to use Subversion's property support,
how to configure runtime options (Chapter 7, Advanced Topics), and other things. These two
chapters aren't vital at first, but be sure to read them once you're comfortable with the basics.
Developers
Presumably, you're already familiar with Subversion, and now want to either extend it or build new
software on top of its many APIs. Chapter 8, Developer Information is just for you.
The book ends with reference material—Chapter 9, Subversion Complete Reference is a reference guide
for all Subversion commands, and the appendices cover a number of useful topics. These are the
chapters you're mostly likely to come back to after you've finished the book.
Conventions Used in This Book
This section covers the various conventions used in this book.
Typographic Conventions
Constant width
Used for commands, command output, and switches
Constant width italic
Used for replaceable items in code and text
Italic
Used for file and directory names
Icons
Note
This icon designates a note relating to the surrounding text.
xiv
Preface
Tip
This icon designates a helpful tip relating to the surrounding text.
Warning
This icon designates a warning relating to the surrounding text.
Note that the source code examples are just that—examples. While they will compile with the proper
compiler incantations, they are intended to illustrate the problem at hand, not necessarily serve as examples of good programming style.
Organization of This Book
The chapters that follow and their contents are listed here:
Chapter 1, Introduction
Covers the history of Subversion as well as its features, architecture, components, and install methods. Also includes a quick-start guide.
Chapter 2, Basic Concepts
Explains the basics of version control and different versioning models, along with Subversion's repository, working copies, and revisions.
Chapter 3, Guided Tour
Walks you through a day in the life of a Subversion user. It demonstrates how to use Subversion to
obtain, modify, and commit data.
Chapter 4, Branching and Merging
Discusses branches, merges, and tagging, including best practices for branching and merging, common use cases, how to undo changes, and how to easily swing from one branch to the next.
Chapter 5, Repository Administration
Describes the basics of the Subversion repository, how to create, configure, and maintain a repository, and the tools you can use to do all of this.
Chapter 6, Server Configuration
Explains how to configure your Subversion server and the three ways to access your repository:
HTTP, the svn protocol, and local access. It also covers the details of authentication, authorization
and anonymous access.
Chapter 7, Advanced Topics
Explores the Subversion client configuration files, file and directory properties, how to ignore
files in your working copy, how to include external trees in your working copy, and lastly, how to
handle vendor branches.
Chapter 8, Developer Information
Describes the internals of Subversion, the Subversion filesystem, and the working copy administrative areas from a programmer's point of view. Demonstrates how to use the public APIs to write a
program that uses Subversion, and most importantly, how to contribute to the development of Subversion.
Chapter 9, Subversion Complete Reference
Explains in great detail every subcommand of svn, svnadmin, and svnlook with plenty of examples
xv
Preface
for the whole family!
Appendix A, Subversion for CVS Users
Covers the similarities and differences between Subversion and CVS, with numerous suggestions
on how to break all the bad habits you picked up from years of using CVS. Included are descriptions of Subversion revision numbers, versioned directories, offline operations, update vs. status,
branches, tags, metadata, conflict resolution, and authentication.
Appendix B, WebDAV and Autoversioning
Describes the details of WebDAV and DeltaV, and how you can configure your Subversion repository to be mounted read/write as a DAV share.
Appendix C, Third Party Tools
Discusses tools that support or use Subversion, including alternative client programs, repository
browser tools, and so on.
This Book is Free
This book started out as bits of documentation written by Subversion project developers, which were
then coalesced into a single work and rewritten. As such, it has always been under a free license. (See
Appendix D, Copyright.) In fact, the book was written in the public eye, as a part of Subversion. This
means two things:
• You will always find the latest version of this book in the book's own Subversion repository.
• You can distribute and make changes to this book however you wish—it's under a free license. Of
course, rather than distribute your own private version of this book, we'd much rather you send feedback and patches to the Subversion developer community. See the section called “Contributing to
Subversion” to learn about joining this community.
A relatively recent online version of this book can be found at http://svnbook.red-bean.com.
Acknowledgments
This book would not be possible (nor very useful) if Subversion did not exist. For that, the authors
would like to thank Brian Behlendorf and CollabNet for the vision to fund such a risky and ambitious
new Open Source project; Jim Blandy for the original Subversion name and design—we love you, Jim;
Karl Fogel for being such a good friend and a great community leader, in that order.1
Thanks to O'Reilly and our editors, Linda Mui and Tatiana Diaz for their patience and support.
Finally, we thank the countless people who contributed to this book with informal reviews, suggestions,
and fixes: While this is undoubtedly not a complete list, this book would be incomplete and incorrect
without the help of: Jani Averbach, Ryan Barrett, Francois Beausoleil, Jennifer Bevan, Matt Blais, Zack
Brown, Martin Buchholz, Brane Cibej, John R. Daily, Peter Davis, Olivier Davy, Robert P. J. Day, Mo
DeJong, Brian Denny, Joe Drew, Nick Duffek, Ben Elliston, Justin Erenkrantz, Shlomi Fish, Julian
Foad, Chris Foote, Martin Furter, Dave Gilbert, Eric Gillespie, Matthew Gregan, Art Haas, Greg Hudson, Alexis Huxley, Jens B. Jorgensen, Tez Kamihira, David Kimdon, Mark Benedetto King, Andreas J.
Koenig, Nuutti Kotivuori, Matt Kraai, Scott Lamb, Vincent Lefevre, Morten Ludvigsen, Paul Lussier,
Bruce A. Mah, Philip Martin, Feliciano Matias, Patrick Mayweg, Gareth McCaughan, Jon Middleton,
Tim Moloney, Mats Nilsson, Joe Orton, Amy Lyn Pilato, Kevin Pilch-Bisson, Dmitriy Popkov, Michael
Price, Mark Proctor, Steffen Prohaska, Daniel Rall, Tobias Ringstrom, Garrett Rooney, Joel Rosdahl,
Christian Sauer, Larry Shatzer, Russell Steicke, Sander Striker, Erik Sjoelund, Johan Sundstroem, John
1
Oh, and thanks, Karl, for being too overworked to write this book yourself.
xvi
Preface
Szakmeister, Mason Thomas, Eric Wadsworth, Colin Watson, Alex Waugh, Chad Whitacre, Josef Wolf,
Blair Zajac, and the entire Subversion community.
From Ben Collins-Sussman
Thanks to my wife Frances, who, for many months, got to hear, “But honey, I'm still working on the
book”, rather than the usual, “But honey, I'm still doing email.” I don't know where she gets all that patience! She's my perfect counterbalance.
Thanks to my extended family for their sincere encouragement, despite having no actual interest in the
subject. (You know, the ones who say, “Ooh, you're writing a book?”, and then when you tell them it's a
computer book, sort of glaze over.)
Thanks to all my close friends, who make me a rich, rich man. Don't look at me that way—you know
who you are.
From Brian W. Fitzpatrick
Huge thanks to my wife Marie for being incredibly understanding, supportive, and most of all, patient.
Thank you to my brother Eric who first introduced me to UNIX programming way back when. Thanks
to my Mom and Grandmother for all their support, not to mention enduring a Christmas holiday where I
came home and promptly buried my head in my laptop to work on the book.
To Mike and Ben: It was a pleasure working with you on the book. Heck, it's a pleasure working with
you at work!
To everyone in the Subversion community and the Apache Software Foundation, thanks for having me.
Not a day goes by where I don't learn something from at least one of you.
Lastly, thanks to my Grandfather who always told me that “freedom equals responsibility.” I couldn't
agree more.
From C. Michael Pilato
Special thanks to my wife, Amy, for her love and patient support, for putting up with late nights, and for
even reviewing entire sections of this book—you always go the extra mile, and do so with incredible
grace. Gavin, when you're old enough to read, I hope you're as proud of your Daddy as he is of you.
Mom and Dad (and the rest of the family), thanks for your constant support and enthusiasm.
Hats off to Shep Kendall, through whom the world of computers was first opened to me; Ben CollinsSussman, my tour-guide through the open-source world; Karl Fogel—you are my .emacs; Greg Stein,
for oozing practical programming know-how; Brian Fitzpatrick—for sharing this writing experience
with me. To the many folks from whom I am constantly picking up new knowledge—keep dropping it!
Finally, to the One who perfectly demonstrates creative excellence—thank you.
xvii
Chapter 1. Introduction
Version control is the art of managing changes to information. It has long been a critical tool for programmers, who typically spend their time making small changes to software and then undoing those
changes the next day. But the usefulness of version control software extends far beyond the bounds of
the software development world. Anywhere you can find people using computers to manage information
that changes often, there is room for version control. And that's where Subversion comes into play.
This chapter contains a high-level introduction to Subversion—what it is; what it does; how to get it.
What is Subversion?
Subversion is a free/open-source version control system. That is, Subversion manages files and directories over time. A tree of files is placed into a central repository. The repository is much like an ordinary
file server, except that it remembers every change ever made to your files and directories. This allows
you to recover older versions of your data, or examine the history of how your data changed. In this regard, many people think of a version control system as a sort of “time machine”.
Subversion can access its repository across networks, which allows it to be used by people on different
computers. At some level, the ability for various people to modify and manage the same set of data from
their respective locations fosters collaboration. Progress can occur more quickly without a single conduit
through which all modifications must occur. And because the work is versioned, you need not fear that
quality is the trade-off for losing that conduit—if some incorrect change is made to the data, just undo
that change.
Some version control systems are also software configuration management (SCM) systems. These systems are specifically tailored to manage trees of source code, and have many features that are specific to
software development—such as natively understanding programming languages, or supplying tools for
building software. Subversion, however, is not one of these systems. It is a general system that can be
used to manage any collection of files. For you, those files might be source code—for others, anything
from grocery shopping lists to digital video mixdowns and beyond.
Subversion's History
In early 2000, CollabNet, Inc. (http://www.collab.net) began seeking developers to write a replacement
for CVS. CollabNet offers a collaboration software suite called CollabNet Enterprise Edition (CEE) 1 of
which one component is version control. Although CEE used CVS as its initial version control system,
CVS's limitations were obvious from the beginning, and CollabNet knew it would eventually have to
find something better. Unfortunately, CVS had become the de facto standard in the open source world
largely because there wasn't anything better, at least not under a free license. So CollabNet determined
to write a new version control system from scratch, retaining the basic ideas of CVS, but without the
bugs and misfeatures.
In February 2000, they contacted Karl Fogel, the author of Open Source Development with CVS
(Coriolis, 1999), and asked if he'd like to work on this new project. Coincidentally, at the time Karl was
already discussing a design for a new version control system with his friend Jim Blandy. In 1995, the
two had started Cyclic Software, a company providing CVS support contracts, and although they later
sold the business, they still used CVS every day at their jobs. Their frustration with CVS had led Jim to
think carefully about better ways to manage versioned data, and he'd already come up with not only the
name “Subversion”, but also with the basic design of the Subversion repository. When CollabNet called,
Karl immediately agreed to work on the project, and Jim got his employer, Red Hat Software, to essentially donate him to the project for an indefinite period of time. CollabNet hired Karl and Ben CollinsSussman, and detailed design work began in May. With the help of some well-placed prods from Brian
1
There's also a CollabNet Team Edition (CTE) offering aimed at smaller groups.
1
Introduction
Behlendorf and Jason Robbins of CollabNet, and Greg Stein (at the time an independent developer active in the WebDAV/DeltaV specification process), Subversion quickly attracted a community of active
developers. It turned out that many people had had the same frustrating experiences with CVS, and welcomed the chance to finally do something about it.
The original design team settled on some simple goals. They didn't want to break new ground in version
control methodology, they just wanted to fix CVS. They decided that Subversion would match CVS's
features, and preserve the same development model, but not duplicate CVS's most obvious flaws. And
although it did not need to be a drop-in replacement for CVS, it should be similar enough that any CVS
user could make the switch with little effort.
After fourteen months of coding, Subversion became “self-hosting” on August 31, 2001. That is, Subversion developers stopped using CVS to manage Subversion's own source code, and started using Subversion instead.
While CollabNet started the project, and still funds a large chunk of the work (it pays the salaries of a
few full-time Subversion developers), Subversion is run like most open-source projects, governed by a
loose, transparent set of rules that encourage meritocracy. CollabNet's copyright license is fully compliant with the Debian Free Software Guidelines. In other words, anyone is free to download, modify, and
redistribute Subversion as he pleases; no permission from CollabNet or anyone else is required.
Subversion's Features
When discussing the features that Subversion brings to the version control table, it is often helpful to
speak of them in terms of how they improve upon CVS's design. If you're not familiar with CVS, you
may not understand all of these features. And if you're not familiar with version control at all, your eyes
may glaze over unless you first read Chapter 2, Basic Concepts, in which we provide a gentle introduction to version control in general.
Subversion provides:
Directory versioning
CVS only tracks the history of individual files, but Subversion implements a “virtual” versioned
filesystem that tracks changes to whole directory trees over time. Files and directories are versioned.
True version history
Since CVS is limited to file versioning, operations such as copies and renames—which might happen to files, but which are really changes to the contents of some containing directory—aren't supported in CVS. Additionally, in CVS you cannot replace a versioned file with some new thing of the
same name without the new item inheriting the history of the old—perhaps completely unrelated—file. With Subversion, you can add, delete, copy, and rename both files and directories. And
every newly added file begins with a fresh, clean history all its own.
Atomic commits
A collection of modifications either goes into the repository completely, or not at all. This allows
developers to construct and commit changes as logical chunks, and prevents problems that can occur when only a portion of a set of changes is successfully sent to the repository.
Versioned metadata
Each file and directory has a set of properties—keys and their values—associated with it. You can
create and store any arbitrary key/value pairs you wish. Properties are versioned over time, just like
file contents.
Choice of network layers
Subversion has an abstracted notion of repository access, making it easy for people to implement
new network mechanisms. Subversion can plug into the Apache HTTP Server as an extension mod2
Introduction
ule. This gives Subversion a big advantage in stability and interoperability, and instant access to existing features provided by that server—authentication, authorization, wire compression, and so on.
A more lightweight, standalone Subversion server process is also available. This server speaks a
custom protocol which can be easily tunneled over SSH.
Consistent data handling
Subversion expresses file differences using a binary differencing algorithm, which works identically
on both text (human-readable) and binary (human-unreadable) files. Both types of files are stored
equally compressed in the repository, and differences are transmitted in both directions across the
network.
Efficient branching and tagging
The cost of branching and tagging need not be proportional to the project size. Subversion creates
branches and tags by simply copying the project, using a mechanism similar to a hard-link. Thus
these operations take only a very small, constant amount of time.
Hackability
Subversion has no historical baggage; it is implemented as a collection of shared C libraries with
well-defined APIs. This makes Subversion extremely maintainable and usable by other applications
and languages.
Subversion's Architecture
Figure 1.1, “Subversion's Architecture” illustrates what one might call a “mile-high” view of Subversion's design.
Figure 1.1. Subversion's Architecture
3
Introduction
On one end is a Subversion repository that holds all of your versioned data. On the other end is your
Subversion client program, which manages local reflections of portions of that versioned data (called
“working copies”). Between these extremes are multiple routes through various Repository Access (RA)
layers. Some of these routes go across computer networks and through network servers which then access the repository. Others bypass the network altogether and access the repository directly.
Installing Subversion
Subversion is built on a portability layer called APR—the Apache Portable Runtime library. The APR
library provides all the interfaces that Subversion needs to function on different operating systems: disk
access, network access, memory management, and so on. While Subversion is able to use Apache as one
of its network server programs, its dependence on APR does not mean that Apache is a required com4
Introduction
ponent. APR is a standalone library useable by any application. It does mean, however, that like Apache,
Subversion clients and servers run on any operating system that the Apache httpd server runs on: Windows, Linux, all flavors of BSD, Mac OS X, Netware, and others.
The easiest way to get Subversion is to download a binary package built for your operating system. Subversion's website (http://subversion.tigris.org) often has these packages available for download, posted
by volunteers. The site usually contains graphical installer packages for users of Microsoft operating
systems. If you run a Unix-like operating system, you can use your system's native package distribution
system (RPMs, DEBs, the ports tree, etc.) to get Subversion.
Alternately, you can build Subversion directly from source code. From the Subversion website, download the latest source-code release. After unpacking it, follow the instructions in the INSTALL file to
build it. Note that a released source package contains everything you need to build a command-line client capable of talking to a remote repository (in particular, the apr, apr-util, and neon libraries). But optional portions of Subversion have many other dependencies, such as Berkeley DB and possibly Apache
httpd. If you want to do a complete build, make sure you have all of the packages documented in the
INSTALL file. If you plan to work on Subversion itself, you can use your client program to grab the
latest, bleeding-edge source code. This is documented in the section called “Get the Source Code”.
Subversion's Components
Subversion, once installed, has a number of different pieces. The following is a quick overview of what
you get. Don't be alarmed if the brief descriptions leave you scratching your head—there are plenty
more pages in this book devoted to alleviating that confusion.
svn
The command-line client program.
svnversion
A program for reporting the state (in terms of revisions of the items present) of a working copy.
svnlook
A tool for inspecting a Subversion repository.
svnadmin
A tool for creating, tweaking or repairing a Subversion repository.
svndumpfilter
A program for filtering Subversion repository dump streams.
mod_dav_svn
A plug-in module for the Apache HTTP Server, used to make your repository available to others
over a network.
svnserve
A custom standalone server program, runnable as a daemon process or invokable by SSH; another
way to make your repository available to others over a network.
Assuming you have Subversion installed correctly, you should be ready to start. The next two chapters
will walk you through the use of svn, Subversion's command-line client program.
A Quick Start
Some people have trouble absorbing a new technology by reading the sort of “top down” approach
provided by this book. This section is a very short introduction to Subversion, and is designed to give
“bottom up” learners a fighting chance. If you prefer to learn by experimentation, the following demon5
Introduction
stration will get you up and running. Along the way, we give links to the relevant chapters of this book.
If you're new to the entire concept of version control or to the “copy-modify-merge” model used by both
CVS and Subversion, then you should read Chapter 2, Basic Concepts before going any further.
Note
The following example assumes that you have svn, the Subversion command-line client,
and svnadmin, the administrative tool, ready to go. It also assumes you are using Subversion 1.2 or later (run svn --version to check.)
Subversion stores all versioned data in a central repository. To begin, create a new repository:
$ svnadmin create /path/to/repos
$ ls /path/to/repos
conf/ dav/ db/ format hooks/
locks/
README.txt
This command creates a new directory /path/to/repos which contains a Subversion repository.
This new directory contains (among other things) a collection of database files. You won't see your versioned files if you peek inside. For more information about repository creation and maintenance, see
Chapter 5, Repository Administration.
Subversion has no concept of a “project”. The repository is just a virtual versioned filesystem, a large
tree that can hold anything you wish. Some administrators prefer to store only one project in a repository, and others prefer to store multiple projects in a repository by placing them into separate directories.
The merits of each approach are discussed in the section called “Choosing a Repository Layout”. Either
way, the repository only manages files and directories, so it's up to humans to interpret particular directories as “projects”. So while you might see references to projects throughout this book, keep in mind
that we're only ever talking about some directory (or collection of directories) in the repository.
In this example, we assume that you already have some sort of project (a collection of files and directories) that you wish to import into your newly created Subversion repository. Begin by organizing them
into a single directory called myproject (or whatever you wish). For reasons that will be clear later
(see Chapter 4, Branching and Merging), your project's tree structure should contain three top-level directories named branches, tags, and trunk. The trunk directory should contain all of your data,
while branches and tags directories are empty:
/tmp/myproject/branches/
/tmp/myproject/tags/
/tmp/myproject/trunk/
foo.c
bar.c
Makefile
…
The branches, tags, and trunk subdirectories aren't actually required by Subversion. They're
merely a popular convention that you'll most likely want to use later on.
Once you have your tree of data ready to go, import it into the repository with the svn import command
(see the section called “svn import”):
$ svn import /tmp/myproject file:///path/to/repos/myproject -m "initial import"
Adding
/tmp/myproject/branches
Adding
/tmp/myproject/tags
6
Introduction
Adding
/tmp/myproject/trunk
Adding
/tmp/myproject/trunk/foo.c
Adding
/tmp/myproject/trunk/bar.c
Adding
/tmp/myproject/trunk/Makefile
…
Committed revision 1.
$
Now the repository contains this tree of data. As mentioned earlier, you won't see your files by directly
peeking into the repository; they're all stored within a database. But the repository's imaginary filesystem now contains a top-level directory named myproject, which in turn contains your data.
Note that the original /tmp/myproject directory is unchanged; Subversion is unaware of it. (In fact,
you can even delete that directory if you wish.) In order to start manipulating repository data, you need
to create a new “working copy” of the data, a sort of private workspace. Ask Subversion to “check out”
a working copy of the myproject/trunk directory in the repository:
$ svn checkout file:///path/to/repos/myproject/trunk myproject
A myproject/foo.c
A myproject/bar.c
A myproject/Makefile
…
Checked out revision 1.
Now you have a personal copy of part of the repository in a new directory named myproject. You
can edit the files in your working copy and then commit those changes back into the repository.
• Enter your working copy and edit a file's contents.
• Run svn diff to see unified diff output of your changes.
• Run svn commit to commit the new version of your file to the repository.
• Run svn update to bring your working copy “up-to-date” with the repository.
For a full tour of all the things you can do with your working copy, read Chapter 3, Guided Tour.
At this point, you have the option of making your repository available to others over a network. See
Chapter 6, Server Configuration to learn about the different sorts of server processes available and how
to configure them.
7
Chapter 2. Basic Concepts
This chapter is a short, casual introduction to Subversion. If you're new to version control, this chapter is
definitely for you. We begin with a discussion of general version control concepts, work our way into
the specific ideas behind Subversion, and show some simple examples of Subversion in use.
Even though the examples in this chapter show people sharing collections of program source code, keep
in mind that Subversion can manage any sort of file collection—it's not limited to helping computer programmers.
The Repository
Subversion is a centralized system for sharing information. At its core is a repository, which is a central
store of data. The repository stores information in the form of a filesystem tree—a typical hierarchy of
files and directories. Any number of clients connect to the repository, and then read or write to these
files. By writing data, a client makes the information available to others; by reading data, the client receives information from others. Figure 2.1, “A typical client/server system” illustrates this.
Figure 2.1. A typical client/server system
So why is this interesting? So far, this sounds like the definition of a typical file server. And indeed, the
repository is a kind of file server, but it's not your usual breed. What makes the Subversion repository
special is that it remembers every change ever written to it: every change to every file, and even changes
to the directory tree itself, such as the addition, deletion, and rearrangement of files and directories.
When a client reads data from the repository, it normally sees only the latest version of the filesystem
tree. But the client also has the ability to view previous states of the filesystem. For example, a client can
ask historical questions like, “What did this directory contain last Wednesday?” or “Who was the last
person to change this file, and what changes did he make?” These are the sorts of questions that are at
the heart of any version control system: systems that are designed to record and track changes to data
over time.
Versioning Models
The core mission of a version control system is to enable collaborative editing and sharing of data. But
different systems use different strategies to achieve this.
8
Basic Concepts
The Problem of File-Sharing
All version control systems have to solve the same fundamental problem: how will the system allow
users to share information, but prevent them from accidentally stepping on each other's feet? It's all too
easy for users to accidentally overwrite each other's changes in the repository.
Consider the scenario shown in Figure 2.2, “The problem to avoid”. Suppose we have two co-workers,
Harry and Sally. They each decide to edit the same repository file at the same time. If Harry saves his
changes to the repository first, then it's possible that (a few moments later) Sally could accidentally
overwrite them with her own new version of the file. While Harry's version of the file won't be lost
forever (because the system remembers every change), any changes Harry made won't be present in
Sally's newer version of the file, because she never saw Harry's changes to begin with. Harry's work is
still effectively lost—or at least missing from the latest version of the file—and probably by accident.
This is definitely a situation we want to avoid!
Figure 2.2. The problem to avoid
The Lock-Modify-Unlock Solution
Many version control systems use a lock-modify-unlock model to address the problem of many authors
clobbering each other's work. In this model, the repository allows only one person to change a file at a
time. This exclusivity policy is managed using locks. Harry must “lock” a file before he can begin making changes to it. If Harry has locked a file, then Sally cannot also lock it, and therefore cannot make
any changes to that file. All she can do is read the file, and wait for Harry to finish his changes and re9
Basic Concepts
lease his lock. After Harry unlocks the file, Sally can take her turn by locking and editing the file. Figure 2.3, “The lock-modify-unlock solution” demonstrates this simple solution.
Figure 2.3. The lock-modify-unlock solution
The problem with the lock-modify-unlock model is that it's a bit restrictive, and often becomes a roadblock for users:
• Locking may cause administrative problems. Sometimes Harry will lock a file and then forget about
it. Meanwhile, because Sally is still waiting to edit the file, her hands are tied. And then Harry goes on
vacation. Now Sally has to get an administrator to release Harry's lock. The situation ends up causing
a lot of unnecessary delay and wasted time.
• Locking may cause unnecessary serialization. What if Harry is editing the beginning of a text file, and
Sally simply wants to edit the end of the same file? These changes don't overlap at all. They could
easily edit the file simultaneously, and no great harm would come, assuming the changes were properly merged together. There's no need for them to take turns in this situation.
• Locking may create a false sense of security. Pretend that Harry locks and edits file A, while Sally
simultaneously locks and edits file B. But suppose that A and B depend on one another, and the
changes made to each are semantically incompatible. Suddenly A and B don't work together anymore.
10
Basic Concepts
The locking system was powerless to prevent the problem—yet it somehow provided a false sense of
security. It's easy for Harry and Sally to imagine that by locking files, each is beginning a safe, insulated task, and thus not bother discussing their incompatible changes early on.
The Copy-Modify-Merge Solution
Subversion, CVS, and other version control systems use a copy-modify-merge model as an alternative to
locking. In this model, each user's client contacts the project repository and creates a personal working
copy—a local reflection of the repository's files and directories. Users then work in parallel, modifying
their private copies. Finally, the private copies are merged together into a new, final version. The version
control system often assists with the merging, but ultimately a human being is responsible for making it
happen correctly.
Here's an example. Say that Harry and Sally each create working copies of the same project, copied
from the repository. They work concurrently, and make changes to the same file A within their copies.
Sally saves her changes to the repository first. When Harry attempts to save his changes later, the repository informs him that his file A is out-of-date. In other words, that file A in the repository has somehow
changed since he last copied it. So Harry asks his client to merge any new changes from the repository
into his working copy of file A. Chances are that Sally's changes don't overlap with his own; so once he
has both sets of changes integrated, he saves his working copy back to the repository. Figure 2.4, “The
copy-modify-merge solution” and Figure 2.5, “The copy-modify-merge solution (continued)” show this
process.
Figure 2.4. The copy-modify-merge solution
11
Basic Concepts
Figure 2.5. The copy-modify-merge solution (continued)
But what if Sally's changes do overlap with Harry's changes? What then? This situation is called a conflict, and it's usually not much of a problem. When Harry asks his client to merge the latest repository
changes into his working copy, his copy of file A is somehow flagged as being in a state of conflict: he'll
be able to see both sets of conflicting changes, and manually choose between them. Note that software
can't automatically resolve conflicts; only humans are capable of understanding and making the necessary intelligent choices. Once Harry has manually resolved the overlapping changes—perhaps after a
discussion with Sally—he can safely save the merged file back to the repository.
The copy-modify-merge model may sound a bit chaotic, but in practice, it runs extremely smoothly.
Users can work in parallel, never waiting for one another. When they work on the same files, it turns out
that most of their concurrent changes don't overlap at all; conflicts are infrequent. And the amount of
time it takes to resolve conflicts is far less than the time lost by a locking system.
In the end, it all comes down to one critical factor: user communication. When users communicate
poorly, both syntactic and semantic conflicts increase. No system can force users to communicate perfectly, and no system can detect semantic conflicts. So there's no point in being lulled into a false promise that a locking system will somehow prevent conflicts; in practice, locking seems to inhibit productivity more than anything else.
12
Basic Concepts
When Locking is Necessary
While the lock-modify-unlock model is considered generally harmful to collaboration, there are
still times when locking is appropriate.
The copy-modify-merge model is based on the assumption that files are contextually mergeable:
that is, that the majority of the files in the repository are line-based text files (such as program
source code). But for files with binary formats, such as artwork or sound, it's often impossible to
merge conflicting changes. In these situations, it really is necessary to users to take strict turns
when changing the file. Without serialized access, somebody ends up wasting time on changes
that are ultimately discarded.
While CVS and Subversion are still primarily copy-modify-merge systems, they both recognize
the need to lock an occasional file and provide mechanisms for this. See the section called
“Locking”.
Subversion in Action
It's time to move from the abstract to the concrete. In this section, we'll show real examples of Subversion being used.
Working Copies
You've already read about working copies; now we'll demonstrate how the Subversion client creates and
uses them.
A Subversion working copy is an ordinary directory tree on your local system, containing a collection of
files. You can edit these files however you wish, and if they're source code files, you can compile your
program from them in the usual way. Your working copy is your own private work area: Subversion will
never incorporate other people's changes, nor make your own changes available to others, until you explicitly tell it to do so. You can even have multiple working copies of the same project.
After you've made some changes to the files in your working copy and verified that they work properly,
Subversion provides you with commands to “publish” your changes to the other people working with
you on your project (by writing to the repository). If other people publish their own changes, Subversion
provides you with commands to merge those changes into your working directory (by reading from the
repository).
A working copy also contains some extra files, created and maintained by Subversion, to help it carry
out these commands. In particular, each directory in your working copy contains a subdirectory named
.svn, also known as the working copy administrative directory. The files in each administrative directory help Subversion recognize which files contain unpublished changes, and which files are out-of-date
with respect to others' work.
A typical Subversion repository often holds the files (or source code) for several projects; usually, each
project is a subdirectory in the repository's filesystem tree. In this arrangement, a user's working copy
will usually correspond to a particular subtree of the repository.
For example, suppose you have a repository that contains two software projects, paint and calc.
Each project lives in its own top-level subdirectory, as shown in Figure 2.6, “The repository's filesystem”.
Figure 2.6. The repository's filesystem
13
Basic Concepts
To get a working copy, you must check out some subtree of the repository. (The term “check out” may
sound like it has something to do with locking or reserving resources, but it doesn't; it simply creates a
private copy of the project for you.) For example, if you check out /calc, you will get a working copy
like this:
$ svn checkout http://svn.example.com/repos/calc
A
calc/Makefile
A
calc/integer.c
A
calc/button.c
Checked out revision 56.
$ ls -A calc
Makefile integer.c
button.c
.svn/
The list of letter A's indicates that Subversion is adding a number of items to your working copy. You
now have a personal copy of the repository's /calc directory, with one additional
entry—.svn—which holds the extra information needed by Subversion, as mentioned earlier.
Repository URLs
Subversion repositories can be accessed through many different methods—on local disk, or
through various network protocols. A repository location, however, is always a URL. Table 2.1,
“Repository Access URLs” describes how different URL schemas map to the available access
14
Basic Concepts
methods.
Table 2.1. Repository Access URLs
Schema
Access Method
file:///
direct repository access (on local disk)
http://
access via WebDAV protocol to Subversion-aware
Apache server
https://
same as http://, but with SSL encryption.
svn://
access via custom protocol to an svnserve server
svn+ssh://
same as svn://, but through an SSH tunnel.
For more information on how Subversion parses URLs, see the section called “Subversion Repository URLs”.
Suppose you make changes to button.c. Since the .svn directory remembers the file's modification
date and original contents, Subversion can tell that you've changed the file. However, Subversion does
not make your changes public until you explicitly tell it to. The act of publishing your changes is more
commonly known as committing (or checking in) changes to the repository.
To publish your changes to others, you can use Subversion's commit command:
$ svn commit button.c
Sending
button.c
Transmitting file data .
Committed revision 57.
Now your changes to button.c have been committed to the repository; if another user checks out a
working copy of /calc, they will see your changes in the latest version of the file.
Suppose you have a collaborator, Sally, who checked out a working copy of /calc at the same time
you did. When you commit your change to button.c, Sally's working copy is left unchanged; Subversion only modifies working copies at the user's request.
To bring her project up to date, Sally can ask Subversion to update her working copy, by using the Subversion update command. This will incorporate your changes into her working copy, as well as any others that have been committed since she checked it out.
$ pwd
/home/sally/calc
$ ls -A
.svn/ Makefile integer.c button.c
$ svn update
U
button.c
Updated to revision 57.
The output from the svn update command indicates that Subversion updated the contents of button.c. Note that Sally didn't need to specify which files to update; Subversion uses the information in
15
Basic Concepts
the .svn directory, and further information in the repository, to decide which files need to be brought
up to date.
Revisions
An svn commit operation can publish changes to any number of files and directories as a single atomic
transaction. In your working copy, you can change files' contents, create, delete, rename and copy files
and directories, and then commit the complete set of changes as a unit.
In the repository, each commit is treated as an atomic transaction: either all the commit's changes take
place, or none of them take place. Subversion tries to retain this atomicity in the face of program
crashes, system crashes, network problems, and other users' actions.
Each time the repository accepts a commit, this creates a new state of the filesystem tree, called a revision. Each revision is assigned a unique natural number, one greater than the number of the previous revision. The initial revision of a freshly created repository is numbered zero, and consists of nothing but
an empty root directory.
Figure 2.7, “The repository” illustrates a nice way to visualize the repository. Imagine an array of revision numbers, starting at 0, stretching from left to right. Each revision number has a filesystem tree
hanging below it, and each tree is a “snapshot” of the way the repository looked after a commit.
Figure 2.7. The repository
Global Revision Numbers
Unlike those of many other version control systems, Subversion's revision numbers apply to entire trees, not individual files. Each revision number selects an entire tree, a particular state of the
repository after some committed change. Another way to think about it is that revision N represents the state of the repository filesystem after the Nth commit. When Subversion users talk about
16
Basic Concepts
“revision 5 of foo.c”, they really mean “foo.c as it appears in revision 5.” Notice that in general, revisions N and M of a file do not necessarily differ! Because CVS uses per-file revision
numbers, CVS users might want to see Appendix A, Subversion for CVS Users for more details.
It's important to note that working copies do not always correspond to any single revision in the repository; they may contain files from several different revisions. For example, suppose you check out a working copy from a repository whose most recent revision is 4:
calc/Makefile:4
integer.c:4
button.c:4
At the moment, this working directory corresponds exactly to revision 4 in the repository. However,
suppose you make a change to button.c, and commit that change. Assuming no other commits have
taken place, your commit will create revision 5 of the repository, and your working copy will now look
like this:
calc/Makefile:4
integer.c:4
button.c:5
Suppose that, at this point, Sally commits a change to integer.c, creating revision 6. If you use svn
update to bring your working copy up to date, then it will look like this:
calc/Makefile:6
integer.c:6
button.c:6
Sally's change to integer.c will appear in your working copy, and your change will still be present
in button.c. In this example, the text of Makefile is identical in revisions 4, 5, and 6, but Subversion will mark your working copy of Makefile with revision 6 to indicate that it is still current. So,
after you do a clean update at the top of your working copy, it will generally correspond to exactly one
revision in the repository.
How Working Copies Track the Repository
For each file in a working directory, Subversion records two essential pieces of information in the
.svn/ administrative area:
• what revision your working file is based on (this is called the file's working revision), and
• a timestamp recording when the local copy was last updated by the repository.
Given this information, by talking to the repository, Subversion can tell which of the following four
states a working file is in:
Unchanged, and current
The file is unchanged in the working directory, and no changes to that file have been committed to
the repository since its working revision. An svn commit of the file will do nothing, and an svn up17
Basic Concepts
date of the file will do nothing.
Locally changed, and current
The file has been changed in the working directory, and no changes to that file have been committed to the repository since its base revision. There are local changes that have not been committed to
the repository, thus an svn commit of the file will succeed in publishing your changes, and an svn
update of the file will do nothing.
Unchanged, and out-of-date
The file has not been changed in the working directory, but it has been changed in the repository.
The file should eventually be updated, to make it current with the public revision. An svn commit
of the file will do nothing, and an svn update of the file will fold the latest changes into your working copy.
Locally changed, and out-of-date
The file has been changed both in the working directory, and in the repository. An svn commit of
the file will fail with an “out-of-date” error. The file should be updated first; an svn update command will attempt to merge the public changes with the local changes. If Subversion can't complete
the merge in a plausible way automatically, it leaves it to the user to resolve the conflict.
This may sound like a lot to keep track of, but the svn status command will show you the state of any
item in your working copy. For more information on that command, see the section called “svn status”.
Mixed Revision Working Copies
As a general principle, Subversion tries to be as flexible as possible. One special kind of flexibility is the
ability to have a working copy containing files and directories with a mix of different working revision
numbers. Unfortunately, this flexibility tends to confuse a number of new users. If the earlier example
showing mixed revisions perplexed you, here's a primer on both why the feature exists and how to make
use of it.
Updates and Commits are Separate
One of the fundamental rules of Subversion is that a “push” action does not cause a “pull”, nor the other
way around. Just because you're ready to submit new changes to the repository doesn't mean you're
ready to receive changes from other people. And if you have new changes still in progress, then svn update should gracefully merge repository changes into your own, rather than forcing you to publish them.
The main side-effect of this rule is that it means a working copy has to do extra bookkeeping to track
mixed revisions, and be tolerant of the mixture as well. It's made more complicated by the fact that directories themselves are versioned.
For example, suppose you have a working copy entirely at revision 10. You edit the file foo.html and
then perform an svn commit, which creates revision 15 in the repository. After the commit succeeds,
many new users would expect the working copy to be entirely at revision 15, but that's not the case! Any
number of changes might have happened in the repository between revisions 10 and 15. The client
knows nothing of those changes in the repository, since you haven't yet run svn update, and svn commit doesn't pull down new changes. If, on the other hand, svn commit were to automatically download
the newest changes, then it would be possible to set the entire working copy to revision 15—but then
we'd be breaking the fundamental rule of “push” and “pull” remaining separate actions. Therefore the
only safe thing the Subversion client can do is mark the one file—foo.html—as being at revision 15.
The rest of the working copy remains at revision 10. Only by running svn update can the latest changes
be downloaded, and the whole working copy be marked as revision 15.
Mixed revisions are normal
The fact is, every time you run svn commit, your working copy ends up with some mixture of revisions.
18
Basic Concepts
The things you just committed are marked as having larger working revisions than everything else. After
several commits (with no updates in-between) your working copy will contain a whole mixture of revisions. Even if you're the only person using the repository, you will still see this phenomenon. To examine your mixture of working revisions, use the svn status --verbose command (see the section called
“svn status” for more information.)
Often, new users are completely unaware that their working copy contains mixed revisions. This can be
confusing, because many client commands are sensitive to the working revision of the item they're examining. For example, the svn log command is used to display the history of changes to a file or directory (see the section called “svn log”). When the user invokes this command on a working copy object,
they expect to see the entire history of the object. But if the object's working revision is quite old (often
because svn update hasn't been run in a long time), then the history of the older version of the object is
shown.
Mixed revisions are useful
If your project is sufficiently complex, you'll discover that it's sometimes nice to forcibly “backdate”
portions of your working copy to an earlier revision; you'll learn how to do that in Chapter 3, Guided
Tour. Perhaps you'd like to test an earlier version of a sub-module contained in a subdirectory, or perhaps you'd like to figure out when a bug first came into existence in a specific file. This is the “time machine” aspect of a version control system — the feature which allows you to move any portion of your
working copy forward and backward in history.
Mixed revisions have limitations
However you make use of mixed revisions in your working copy, there are limitations to this flexibility.
First, you cannot commit the deletion of a file or directory which isn't fully up-to-date. If a newer version of the item exists in the repository, your attempt to delete will be rejected, to prevent you from accidentally destroying changes you've not yet seen.
Second, you cannot commit a metadata change to a directory unless it's fully up-to-date. You'll learn
about attaching “properties” to items in Chapter 6, Server Configuration. A directory's working revision
defines a specific set of entries and properties, and thus committing a property change to an out-of-date
directory may destroy properties you've not yet seen.
Summary
We've covered a number of fundamental Subversion concepts in this chapter:
• We've introduced the notions of the central repository, the client working copy, and the array of repository revision trees.
• We've seen some simple examples of how two collaborators can use Subversion to publish and receive changes from one another, using the “copy-modify-merge” model.
• We've talked a bit about the way Subversion tracks and manages information in a working copy.
At this point, you should have a good idea of how Subversion works in the most general sense. Armed
with this knowledge, you should now be ready to jump into the next chapter, which is a detailed tour of
Subversion's commands and features.
19
Chapter 3. Guided Tour
Now we will go into the details of using Subversion. By the time you reach the end of this chapter, you
will be able to perform almost all the tasks you need to use Subversion in a normal day's work. You'll
start with an initial checkout of your code, and walk through making changes and examining those
changes. You'll also see how to bring changes made by others into your working copy, examine them,
and work through any conflicts that might arise.
Note that this chapter is not meant to be an exhaustive list of all Subversion's commands—rather, it's a
conversational introduction to the most common Subversion tasks you'll encounter. This chapter assumes that you've read and understood Chapter 2, Basic Concepts and are familiar with the general model of Subversion. For a complete reference of all commands, see Chapter 9, Subversion Complete Reference.
Help!
Before reading on, here is the most important command you'll ever need when using Subversion: svn
help. The Subversion command-line client is self-documenting—at any time, a quick svn help
<subcommand> will describe the syntax, switches, and behavior of the subcommand.
Import
You use svn import to import a new project into a Subversion repository. While this is most likely the
very first thing you will do when you set up your Subversion server, it's not something that happens very
often. For a detailed description of import, see the section called “svn import” later in this chapter.
Revisions: Numbers, Keywords, and Dates, Oh
My!
Before we go on, you should know a bit about how to identify a particular revision in your repository.
As you learned in the section called “Revisions”, a revision is a “snapshot” of the repository at a particular moment in time. As you continue to commit and grow your repository, you need a mechanism for
identifying these snapshots.
You specify these revisions by using the --revision (-r) switch plus the revision you want (svn -revision REV) or you can specify a range by separating two revisions with a colon (svn --revision
REV1:REV2). And Subversion lets you refer to these revisions by number, keyword, or date.
Revision Numbers
When you create a new Subversion repository, it begins its life at revision zero and each successive
commit increases the revision number by one. After your commit completes, the Subversion client informs you of the new revision number:
$ svn commit --message "Corrected number of cheese slices."
Sending
sandwich.txt
Transmitting file data .
Committed revision 3.
If at any point in the future you want to refer to that revision (we'll see how and why we might want to
20
Guided Tour
do that later in this chapter), you can refer to it as “3”.
Revision Keywords
The Subversion client understands a number of revision keywords. These keywords can be used instead
of integer arguments to the --revision switch, and are resolved into specific revision numbers by
Subversion:
Note
Each directory in your working copy contains an administrative subdirectory called .svn.
For every file in a directory, Subversion keeps a copy of each file in the administrative
area. This copy is an unmodified (no keyword expansion, no end-of-line translation, no
nothing) copy of the file as it existed in the last revision (called the “BASE” revision) that
you updated it to in your working copy. We refer to this file as the pristine copy or textbase version of your file, and it's always an exact byte-for-byte copy of the file as it exists
in the repository.
HEAD
The latest (or “youngest”) revision in the repository.
BASE
The revision number of an item in a working copy. If the item has been locally modified, the
“BASE version” refers to the way the item appears without those local modifications.
COMMITTED
The most recent revision prior to, or equal to, BASE, in which an item changed.
PREV
The revision immediately before the last revision in which an item changed. (Technically, COMMITTED - 1.)
Note
PREV, BASE, and COMMITTED can be used to refer to local paths, but not to URLs.
Here are some examples of revision keywords in action. Don't worry if the commands don't make sense
yet; we'll be explaining these commands as we go through the chapter:
$ svn diff --revision PREV:COMMITTED foo.c
# shows the last change committed to foo.c
$ svn log --revision HEAD
# shows log message for the latest repository commit
$ svn diff --revision HEAD
# compares your working file (with local changes) to the latest version
# in the repository
$ svn diff --revision BASE:HEAD foo.c
# compares your “pristine” foo.c (no local changes) with the
# latest version in the repository
$ svn log --revision BASE:HEAD
21
Guided Tour
# shows all commit logs since you last updated
$ svn update --revision PREV foo.c
# rewinds the last change on foo.c
# (foo.c's working revision is decreased)
These keywords allow you to perform many common (and helpful) operations without having to look up
specific revision numbers or remember the exact revision of your working copy.
Revision Dates
Anywhere that you specify a revision number or revision keyword, you can also specify a date inside
curly braces “{}”. You can even access a range of changes in the repository using both dates and revisions together!
Here are examples of the date formats that Subversion accepts. Remember to use quotes around any date
that contains spaces.
$
$
$
$
$
$
$
$
$
$
$
…
svn
svn
svn
svn
svn
svn
svn
svn
svn
svn
svn
checkout
checkout
checkout
checkout
checkout
checkout
checkout
checkout
checkout
checkout
checkout
--revision
--revision
--revision
--revision
--revision
--revision
--revision
--revision
--revision
--revision
--revision
{2002-02-17}
{15:30}
{15:30:00.200000}
{"2002-02-17 15:30"}
{"2002-02-17 15:30 +0230"}
{2002-02-17T15:30}
{2002-02-17T15:30Z}
{2002-02-17T15:30-04:00}
{20020217T1530}
{20020217T1530Z}
{20020217T1530-0500}
When you specify a date as a revision, Subversion finds the most recent revision of the repository as of
that date:
$ svn log --revision {2002-11-28}
-----------------------------------------------------------------------r12 | ira | 2002-11-27 12:31:51 -0600 (Wed, 27 Nov 2002) | 6 lines
…
Is Subversion a Day Early?
If you specify a single date as a revision without specifying a time of day (for example
2002-11-27), you may think that Subversion should give you the last revision that took place
on the 27th of November. Instead, you'll get back a revision from the 26th, or even earlier. Remember that Subversion will find the most recent revision of the repository as of the date you
give. If you give a date without a timestamp, like 2002-11-27, Subversion assumes a time of
00:00:00, so looking for the most recent revision won't return anything on the day of the 27th.
If you want to include the 27th in your search, you can either specify the 27th with the time
({"2002-11-27 23:59"}), or just specify the next day ({2002-11-28}).
You can also use a range of dates. Subversion will find all revisions between both dates, inclusive:
22
Guided Tour
$ svn log --revision {2002-11-20}:{2002-11-29}
…
As we pointed out, you can also mix dates and revisions:
$ svn log --revision {2002-11-20}:4040
Users should be aware of a subtlety that can become quite a stumbling-block when dealing with dates in
Subversion. Since the timestamp of a revision is stored as a property of the revision—an unversioned,
modifiable property—revision timestamps can be changed to represent complete falsifications of true
chronology, or even removed altogether. This will wreak havoc on the internal date-to-revision conversion that Subversion performs.
Initial Checkout
Most of the time, you will start using a Subversion repository by doing a checkout of your project.
Checking out a repository creates a copy of it on your local machine. This copy contains the HEAD
(latest revision) of the Subversion repository that you specify on the command line:
$ svn checkout http://svn.collab.net/repos/svn/trunk
A trunk/subversion.dsw
A trunk/svn_check.dsp
A trunk/COMMITTERS
A trunk/configure.in
A trunk/IDEAS
…
Checked out revision 2499.
What's in a Name?
Subversion tries hard not to limit the type of data you can place under version control. The contents of files and property values are stored and transmitted as binary data, and the section called
“svn:mime-type” tells you how to give Subversion a hint that “textual” operations don't make
sense for a particular file. There are a few places, however, where Subversion places restrictions
on information it stores.
Subversion internally handles certain bits of data—for example, property names, path names, and
log messages—as UTF-8 encoded Unicode. This is not to say that all your interactions with Subversion must involve UTF-8, though. As a general rule, Subversion clients will gracefully and
transparently handle conversions between UTF-8 and the encoding system in use on your computer, if such a conversion can meaningfully be done (which is the case for most common encodings in use today).
In addition, path names are used as XML attribute values in WebDAV exchanges, as well in as
some of Subversion's housekeeping files. This means that path names can only contain legal XML
(1.0) characters. Subversion also prohibits TAB, CR, and LF characters in path names, so they
aren't broken up in diffs, or in the output of commands like svn log or svn status.
While it may seem like a lot to remember, in practice these limitations are rarely a problem. As
long as your locale settings are compatible with UTF-8, and you don't use control characters in
path names, you should have no trouble communicating with Subversion. The command-line client adds an extra bit of help—it will automatically escape legal path characters as needed in URLs
23
Guided Tour
you type to create “legally correct” versions for internal use.
Experienced users of Subversion have also developed a set of best-practice conventions for laying
out paths in the repository. While these aren't strict requirements like the syntax described above,
they help to organize frequently performed tasks. The /trunk part of URLs you'll find
throughout this book is one of these conventions; we'll talk a lot more about it and related recommendations in Chapter 4, Branching and Merging.
Although the above example checks out the trunk directory, you can just as easily check out any deep
subdirectory of a repository by specifying the subdirectory in the checkout URL:
$ svn checkout http://svn.collab.net/repos/svn/trunk/doc/book/tools
A tools/readme-dblite.html
A tools/fo-stylesheet.xsl
A tools/svnbook.el
A tools/dtd
A tools/dtd/dblite.dtd
…
Checked out revision 2499.
Since Subversion uses a “copy-modify-merge” model instead of “lock-modify-unlock” (see Chapter 2,
Basic Concepts), you're already able to start making changes to the files and directories in your working
copy. Your working copy is just like any other collection of files and directories on your system. You
can edit and change them, move them around, you can even delete the entire working copy and forget
about it.
Note
While your working copy is “just like any other collection of files and directories on your
system”, you need to let Subversion know if you're going to be rearranging anything inside
of your working copy. If you want to copy or move an item in a working copy, you should
use svn copy or svn move instead of the copy and move commands provided by your operating system. We'll talk more about them later in this chapter.
Unless you're ready to commit a new file or directory, or changes to existing ones, there's no need to further notify the Subversion server that you've done anything.
What's with the .svn directory?
Every directory in a working copy contains an administrative area, a subdirectory named .svn.
Usually, directory listing commands won't show this subdirectory, but it is nevertheless an important directory. Whatever you do, don't delete or change anything in the administrative area!
Subversion depends on it to manage your working copy.
While you can certainly check out a working copy with the URL of the repository as the only argument,
you can also specify a directory after your repository URL. This places your working copy in the new
directory that you name. For example:
$ svn checkout http://svn.collab.net/repos/svn/trunk subv
A subv/subversion.dsw
A subv/svn_check.dsp
24
Guided Tour
A subv/COMMITTERS
A subv/configure.in
A subv/IDEAS
…
Checked out revision 2499.
That will place your working copy in a directory named subv instead of a directory named trunk as
we did previously.
Basic Work Cycle
Subversion has numerous features, options, bells and whistles, but on a day-to-day basis, odds are that
you will only use a few of them. In this section we'll run through the most common things that you
might find yourself doing with Subversion in the course of a day's work.
The typical work cycle looks like this:
• Update your working copy
• svn update
• Make changes
• svn add
• svn delete
• svn copy
• svn move
• Examine your changes
• svn status
• svn diff
• svn revert
• Merge others' changes into your working copy
• svn update
• svn resolved
• Commit your changes
• svn commit
Update Your Working Copy
When working on a project with a team, you'll want to update your working copy to receive any changes
made since your last update by other developers on the project. Use svn update to bring your working
copy into sync with the latest revision in the repository.
25
Guided Tour
$ svn update
U foo.c
U bar.c
Updated to revision 2.
In this case, someone else checked in modifications to both foo.c and bar.c since the last time you
updated, and Subversion has updated your working copy to include those changes.
Let's examine the output of svn update a bit more. When the server sends changes to your working
copy, a letter code is displayed next to each item to let you know what actions Subversion performed to
bring your working copy up-to-date:
U foo
File foo was Updated (received changes from the server).
A foo
File or directory foo was Added to your working copy.
D foo
File or directory foo was Deleted from your working copy.
R foo
File or directory foo was Replaced in your working copy; that is, foo was deleted, and a new item
with the same name was added. While they may have the same name, the repository considers them
to be distinct objects with distinct histories.
G foo
File foo received new changes from the repository, but your local copy of the file had your modifications. Either the changes did not intersect, or the changes were exactly the same as your local
modifications, so Subversion has successfully merGed the repository's changes into the file without
a problem.
C foo
File foo received Conflicting changes from the server. The changes from the server directly overlap your own changes to the file. No need to panic, though. This overlap needs to be resolved by a
human (you); we discuss this situation later in this chapter.
Make Changes to Your Working Copy
Now you can get to work and make changes in your working copy. It's usually most convenient to decide on a particular change (or set of changes) to make, such as writing a new feature, fixing a bug, etc.
The Subversion commands that you will use here are svn add, svn delete, svn copy, and svn move.
However, if you are merely editing files that are already in Subversion, you may not need to use any of
these commands until you commit. Changes you can make to your working copy:
File changes
This is the simplest sort of change. You don't need to tell Subversion that you intend to change a
file; just make your changes. Subversion will be able to automatically detect which files have been
changed.
Tree changes
You can ask Subversion to “mark” files and directories for scheduled removal, addition, copying, or
moving. While these changes may take place immediately in your working copy, no additions or removals will happen in the repository until you commit them.
26
Guided Tour
To make file changes, use your text editor, word processor, graphics program, or whatever tool you
would normally use. Subversion handles binary files just as easily as it handles text files—and just as efficiently too.
Here is an overview of the four Subversion subcommands that you'll use most often to make tree
changes (we'll cover svn import and svn mkdir later).
Warning
While you can edit your files with whatever tool you like, you shouldn't change the structure of your working copy without letting Subversion know what you're doing. Use the svn
copy, svn delete, and svn move commands to change the structure of your working copy,
and use the svn add command to place new files and directories under version control.
svn add foo
Schedule file, directory, or symbolic link foo to be added to the repository. When you next commit, foo will become a child of its parent directory. Note that if foo is a directory, everything underneath foo will be scheduled for addition. If you only want to add foo itself, pass the -non-recursive (-N) switch.
svn delete foo
Schedule file, directory, or symbolic link foo to be deleted from the repository. If foo is a file or
link, it is immediately deleted from your working copy. If foo is a directory, it is not deleted, but
Subversion schedules it for deletion. When you commit your changes, foo will be removed from
your working copy and the repository. 1
svn copy foo bar
Create a new item bar as a duplicate of foo. bar is automatically scheduled for addition. When
bar is added to the repository on the next commit, its copy history is recorded (as having originally
come from foo). svn copy does not create intermediate directories.
svn move foo bar
This command is exactly the same as running svn copy foo bar; svn delete foo. That is, bar is
scheduled for addition as a copy of foo, and foo is scheduled for removal. svn move does not create intermediate directories.
Changing the Repository Without a Working Copy
Earlier in this chapter, we said that you have to commit any changes that you make in order for
the repository to reflect these changes. That's not entirely true—there are some use cases that immediately commit tree changes to the repository. This only happens when a subcommand is operating directly on a URL, rather than on a working-copy path. In particular, specific uses of svn
mkdir, svn copy, svn move, and svn delete can work with URLs.
URL operations behave in this manner because commands that operate on a working copy can use
the working copy as a sort of “staging area” to set up your changes before committing them to the
repository. Commands that operate on URLs don't have this luxury, so when you operate directly
on a URL, any of the above actions represent an immediate commit.
Examine Your Changes
1
Of course, nothing is ever totally deleted from the repository—just from the HEAD of the repository. You can get back anything
you delete by checking out (or updating your working copy) a revision earlier than the one in which you deleted it.
27
Guided Tour
Once you've finished making changes, you need to commit them to the repository, but before you do so,
it's usually a good idea to take a look at exactly what you've changed. By examining your changes before you commit, you can make a more accurate log message. You may also discover that you've inadvertently changed a file, and this gives you a chance to revert those changes before committing. Additionally, this is a good opportunity to review and scrutinize changes before publishing them. You can see
exactly what changes you've made by using svn status, svn diff, and svn revert. You will usually use
the first two commands to find out what files have changed in your working copy, and then perhaps the
third to revert some (or all) of those changes.
Subversion has been optimized to help you with this task, and is able to do many things without communicating with the repository. In particular, your working copy contains a secret cached “pristine” copy of
each version controlled file within the .svn area. Because of this, Subversion can quickly show you
how your working files have changed, or even allow you to undo your changes without contacting the
repository.
svn status
You'll probably use the svn status command more than any other Subversion command.
CVS Users: Hold That Update!
You're probably used to using cvs update to see what changes you've made to your working
copy. svn status will give you all the information you need regarding what has changed in your
working copy—without accessing the repository or potentially incorporating new changes published by other users.
In Subversion, update does just that—it updates your working copy with any changes committed
to the repository since the last time you've updated your working copy. You'll have to break the
habit of using the update command to see what local modifications you've made.
If you run svn status at the top of your working copy with no arguments, it will detect all file and tree
changes you've made. Below are examples of the different status codes that svn status can return. (Note
that the text following # is not actually printed by svn status.)
L
M
M
X
?
!
~
I
A
M
D
A
C
+
+
C
R
S
K
O
B
T
some_dir
bar.c
baz.c
3rd_party
foo.o
some_dir
qux
.screenrc
moved_dir
moved_dir/README
stuff/fish.c
stuff/loot/bloo.h
stuff/loot/lump.c
stuff/loot/glub.c
xyz.c
stuff/squawk
dog.jpg
cat.jpg
bird.jpg
fish.jpg
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
svn left a lock in the .svn area of some_dir
the content in bar.c has local modifications
baz.c has property but no content modifications
dir is part of an externals definition
svn doesn't manage foo.o
svn manages this, but it's missing or incomplete
versioned as file/dir/link, but type has changed
svn doesn't manage this, and is set to ignore it
added with history of where it came from
added with history and has local modifications
file is scheduled for deletion
file is scheduled for addition
file has textual conflicts from an update
file has property conflicts from an update
file is scheduled for replacement
file or dir has been switched to a branch
file is locked locally; lock-token present
file is locked in the repository by other user
file is locked locally, but lock has been broken
file is locked locally, but lock has been stolen
28
Guided Tour
In this output format svn status prints five columns of characters, followed by several whitespace characters, followed by a file or directory name. The first column tells the status of a file or directory and/or
its contents. The codes printed here are:
A item
The file, directory, or symbolic link item has been scheduled for addition into the repository.
C item
The file item is in a state of conflict. That is, changes received from the server during an update
overlap with local changes that you have in your working copy. You must resolve this conflict before committing your changes to the repository.
D item
The file, directory, or symbolic link item has been scheduled for deletion from the repository.
M item
The contents of the file item have been modified.
R item
The file, directory, or symbolic link item has been scheduled to replace item in the repository.
This means that the object is first deleted, then another object of the same name is added, all within
a single revision.
X item
The directory item is unversioned, but is related to a Subversion externals definition. To find out
more about externals definitions, see the section called “Externals Definitions”.
? item
The file, directory, or symbolic link item is not under version control. You can silence the question marks by either passing the --quiet (-q) switch to svn status, or by setting the
svn:ignore property on the parent directory. For more information on ignored files, see the section called “svn:ignore”.
! item
The file, directory, or symbolic link item is under version control but is missing or somehow incomplete. The item can be missing if it's removed using a non-Subversion command. In the case of
a directory, it can be incomplete if you happened to interrupt a checkout or update. A quick svn update will refetch the file or directory from the repository, or svn revert file will restore a missing
file.
~ item
The file, directory, or symbolic link item is in the repository as one kind of object, but what's actually in your working copy is some other kind. For example, Subversion might have a file in the repository, but you removed the file and created a directory in its place, without using the svn delete
or svn add command.
I item
The file, directory, or symbolic link item is not under version control, and Subversion is configured to ignore it during svn add, svn import and svn status operations. For more information on
ignored files, see the section called “svn:ignore”. Note that this symbol only shows up if you
pass the --no-ignore option to svn status—otherwise the file would be ignored and not listed at
all!
The second column tells the status of a file or directory's properties (see the section called “Properties”
for more information on properties). If an M appears in the second column, then the properties have been
modified, otherwise a whitespace will be printed.
29
Guided Tour
The third column will only show whitespace or an L which means that Subversion has locked the directory's .svn working area. You will see an L if you run svn status in a directory where an svn commit is
in progress—perhaps when you are editing the log message. If Subversion is not running, then presumably Subversion was interrupted and the lock needs to be cleaned up by running svn cleanup (more
about that later in this chapter).
The fourth column will only show whitespace or a + which means that the file or directory is scheduled
to be added or modified with additional attached history. This typically happens when you svn move or
svn copy a file or directory. If you see A +, this means the item is scheduled for addition-with-history.
It could be a file, or the root of a copied directory. + means the item is part of a subtree scheduled for
addition-with-history, i.e. some parent got copied, and it's just coming along for the ride. M + means
the item is part of a subtree scheduled for addition-with-history, and it has local modifications. When
you commit, first the parent will be added-with-history (copied), which means this file will automatically exist in the copy. Then the local modifications will be uploaded into the copy.
The fifth column will only show whitespace or an S. This signifies that the file or directory has been
switched from the path of the rest of the working copy (using svn switch) to a branch.
The sixth column shows information about locks, which is further explained in the section called
“Locking”. (These are not the same locks as the ones indicated by an L in the third column; see Three
meanings of “lock”.)
If you pass a specific path to svn status, it gives you information about that item alone:
$ svn status stuff/fish.c
D
stuff/fish.c
svn status also has a --verbose (-v) switch, which will show you the status of every item in your
working copy, even if it has not been changed:
$ svn status --verbose
M
44
44
M
44
44
44
D
44
44
A
0
44
23
30
20
18
35
19
21
?
36
sally
sally
harry
ira
harry
ira
sally
?
harry
README
INSTALL
bar.c
stuff
stuff/trout.c
stuff/fish.c
stuff/things
stuff/things/bloo.h
stuff/things/gloo.c
This is the “long form” output of svn status. The first column remains the same, but the second column
shows the working-revision of the item. The third and fourth columns show the revision in which the
item last changed, and who changed it.
None of the above invocations to svn status contact the repository, they work only locally by comparing
the metadata in the .svn directory with the working copy. Finally, there is the --show-updates (u) switch, which contacts the repository and adds information about things that are out-of-date:
$ svn status --show-updates --verbose
M
*
44
23
sally
M
44
20
harry
*
44
35
harry
D
44
19
ira
A
0
?
?
Status against revision:
46
30
README
bar.c
stuff/trout.c
stuff/fish.c
stuff/things/bloo.h
Guided Tour
Notice the two asterisks: if you were to run svn update at this point, you would receive changes to
README and trout.c. This tells you some very useful information—you'll need to update and get the
server changes on README before you commit, or the repository will reject your commit for being outof-date. (More on this subject later.)
svn diff
Another way to examine your changes is with the svn diff command. You can find out exactly how
you've modified things by running svn diff with no arguments, which prints out file changes in unified
diff format:2
$ svn diff
Index: bar.c
===================================================================
--- bar.c (revision 3)
+++ bar.c (working copy)
@@ -1,7 +1,12 @@
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <unistd.h>
+
+#include <stdio.h>
int main(void) {
printf("Sixty-four slices of American Cheese...\n");
printf("Sixty-five slices of American Cheese...\n");
return 0;
}
+
Index: README
===================================================================
--- README (revision 3)
+++ README (working copy)
@@ -193,3 +193,4 @@
+Note to self: pick up laundry.
Index: stuff/fish.c
===================================================================
--- stuff/fish.c (revision 1)
+++ stuff/fish.c (working copy)
-Welcome to the file known as 'fish'.
-Information on fish will be here soon.
Index: stuff/things/bloo.h
===================================================================
--- stuff/things/bloo.h (revision 8)
+++ stuff/things/bloo.h (working copy)
+Here is a new file to describe
+things about bloo.
The svn diff command produces this output by comparing your working files against the cached
“pristine” copies within the .svn area. Files scheduled for addition are displayed as all added-text, and
files scheduled for deletion are displayed as all deleted text.
2
Subversion uses its internal diff engine, which produces unified diff format, by default. If you want diff output in a different
format, specify an external diff program using --diff-cmd and pass any flags you'd like to it using the --extensions
switch. For example, to see local differences in file foo.c in context output format while ignoring whitespace changes, you might
run svn diff --diff-cmd /usr/bin/diff --extensions '-bc' foo.c.
31
Guided Tour
Output is displayed in unified diff format. That is, removed lines are prefaced with a - and added lines
are prefaced with a +. svn diff also prints filename and offset information useful to the patch program,
so you can generate “patches” by redirecting the diff output to a file:
$ svn diff > patchfile
You could, for example, email the patch file to another developer for review or testing prior to commit.
svn revert
Now suppose you see the above diff output, and realize that your changes to README are a mistake;
perhaps you accidentally typed that text into the wrong file in your editor.
This is a perfect opportunity to use svn revert.
$ svn revert README
Reverted 'README'
Subversion reverts the file to its pre-modified state by overwriting it with the cached “pristine” copy
from the .svn area. But also note that svn revert can undo any scheduled operations—for example,
you might decide that you don't want to add a new file after all:
$ svn status foo
?
foo
$ svn add foo
A
foo
$ svn revert foo
Reverted 'foo'
$ svn status foo
?
foo
Note
svn revert ITEM has exactly the same effect as deleting ITEM from your working copy
and then running svn update -r BASE ITEM. However, if you're reverting a file, svn revert has one very noticeable difference—it doesn't have to communicate with the repository to restore your file.
Or perhaps you mistakenly removed a file from version control:
$ svn status README
README
$ svn delete README
D
README
$ svn revert README
Reverted 'README'
$ svn status README
32
Guided Tour
README
Look Ma! No Network!
All three of these commands (svn status, svn diff, and svn revert) can be used without any network access. This makes it easy to manage your changes-in-progress when you are somewhere
without a network connection, such as travelling on an airplane, riding a commuter train or hacking on the beach.
Subversion does this by keeping private caches of pristine versions of each versioned file inside
of the .svn administrative areas. This allows Subversion to report—and revert—local modifications to those files without network access. This cache (called the “text-base”) also allows Subversion to send the user's local modifications during a commit to the server as a compressed delta (or
“difference”) against the pristine version. Having this cache is a tremendous benefit—even if you
have a fast net connection, it's much faster to send only a file's changes rather than the whole file
to the server. At first glance, this might not seem that important, but imagine the repercussions if
you try to commit a one line change to a 400MB file and have to send the whole file to the server!
Resolve Conflicts (Merging Others' Changes)
We've already seen how svn status -u can predict conflicts. Suppose you run svn update and some interesting things occur:
$ svn update
U INSTALL
G README
C bar.c
Updated to revision 46.
The U and G codes are no cause for concern; those files cleanly absorbed changes from the repository.
The files marked with U contained no local changes but were Updated with changes from the repository.
The G stands for merGed, which means that the file had local changes to begin with, but the changes
coming from the repository didn't overlap with the local changes.
But the C stands for conflict. This means that the changes from the server overlapped with your own,
and now you have to manually choose between them.
Whenever a conflict occurs, three things typically occur to assist you in noticing and resolving that conflict:
• Subversion prints a C during the update, and remembers that the file is in a state of conflict.
• If Subversion considers the file to be of a mergeable type, it places conflict markers—special strings
of text which delimit the “sides” of the conflict—into the file to visibly demonstrate the overlapping
areas. (Subversion uses the svn:mime-type property to decide if a file is capable of contextual,
line-based merging. See the section called “svn:mime-type” to learn more.)
• For every conflicted file, Subversion places up to three extra unversioned files in your working copy:
filename.mine
This is your file as it existed in your working copy before you updated your working copy—that is,
without conflict markers. This file has your latest changes in it and nothing else. (If Subversion considers the file to be unmergeable, then the .mine file isn't created, since it would be identical to the
33
Guided Tour
working file.)
filename.rOLDREV
This is the file that was the BASE revision before you updated your working copy. That is, the file
that you checked out before you made your latest edits.
filename.rNEWREV
This is the file that your Subversion client just received from the server when you updated your
working copy. This file corresponds to the HEAD revision of the repository.
Here OLDREV is the revision number of the file in your .svn directory and NEWREV is the revision
number of the repository HEAD.
For example, Sally makes changes to the file sandwich.txt in the repository. Harry has just changed
the file in his working copy and checked it in. Sally updates her working copy before checking in and
she gets a conflict:
$ svn update
C sandwich.txt
Updated to revision 2.
$ ls -1
sandwich.txt
sandwich.txt.mine
sandwich.txt.r1
sandwich.txt.r2
At this point, Subversion will not allow you to commit the file sandwich.txt until the three temporary files are removed.
$ svn commit --message "Add a few more things"
svn: Commit failed (details follow):
svn: Aborting commit: '/home/sally/svn-work/sandwich.txt' remains in conflict
If you get a conflict, you need to do one of three things:
• Merge the conflicted text “by hand” (by examining and editing the conflict markers within the file).
• Copy one of the temporary files on top of your working file.
• Run svn revert <filename> to throw away all of your local changes.
Once you've resolved the conflict, you need to let Subversion know by running svn resolved. This removes the three temporary files and Subversion no longer considers the file to be in a state of conflict.3
$ svn resolved sandwich.txt
Resolved conflicted state of 'sandwich.txt'
Merging Conflicts by Hand
3
You can always remove the temporary files yourself, but would you really want to do that when Subversion can do it for you? We
didn't think so.
34
Guided Tour
Merging conflicts by hand can be quite intimidating the first time you attempt it, but with a little practice, it can become as easy as falling off a bike.
Here's an example. Due to a miscommunication, you and Sally, your collaborator, both edit the file
sandwich.txt at the same time. Sally commits her changes, and when you go to update your working copy, you get a conflict and we're going to have to edit sandwich.txt to resolve the conflicts.
First, let's take a look at the file:
$ cat sandwich.txt
Top piece of bread
Mayonnaise
Lettuce
Tomato
Provolone
<<<<<<< .mine
Salami
Mortadella
Prosciutto
=======
Sauerkraut
Grilled Chicken
>>>>>>> .r2
Creole Mustard
Bottom piece of bread
The strings of less-than signs, equal signs, and greater-than signs are conflict markers, and are not part
of the actual data in conflict. You generally want to ensure that those are removed from the file before
your next commit. The text between the first two sets of markers is composed of the changes you made
in the conflicting area:
<<<<<<< .mine
Salami
Mortadella
Prosciutto
=======
The text between the second and third sets of conflict markers is the text from Sally's commit:
=======
Sauerkraut
Grilled Chicken
>>>>>>> .r2
Usually you won't want to just delete the conflict markers and Sally's changes—she's going to be awfully surprised when the sandwich arrives and it's not what she wanted. So this is where you pick up the
phone or walk across the office and explain to Sally that you can't get sauerkraut from an Italian deli.4
Once you've agreed on the changes you will check in, edit your file and remove the conflict markers.
Top piece of bread
Mayonnaise
Lettuce
Tomato
Provolone
4
And if you ask them for it, they may very well ride you out of town on a rail.
35
Guided Tour
Salami
Mortadella
Prosciutto
Creole Mustard
Bottom piece of bread
Now run svn resolved, and you're ready to commit your changes:
$ svn resolved sandwich.txt
$ svn commit -m "Go ahead and use my sandwich, discarding Sally's edits."
Remember, if you ever get confused while editing the conflicted file, you can always consult the three
files that Subversion creates for you in your working copy—including your file as it was before you updated. You can even use a third-party interactive merging tool to examine those three files.
Copying a File Onto Your Working File
If you get a conflict and decide that you want to throw out your changes, you can merely copy one of the
temporary files created by Subversion over the file in your working copy:
$ svn update
C sandwich.txt
Updated to revision 2.
$ ls sandwich.*
sandwich.txt sandwich.txt.mine sandwich.txt.r2
$ cp sandwich.txt.r2 sandwich.txt
$ svn resolved sandwich.txt
sandwich.txt.r1
Punting: Using svn revert
If you get a conflict, and upon examination decide that you want to throw out your changes and start
your edits again, just revert your changes:
$ svn revert sandwich.txt
Reverted 'sandwich.txt'
$ ls sandwich.*
sandwich.txt
Note that when you revert a conflicted file, you don't have to run svn resolved.
Now you're ready to check in your changes. Note that svn resolved, unlike most of the other commands
we've dealt with in this chapter, requires an argument. In any case, you want to be careful and only run
svn resolved when you're certain that you've fixed the conflict in your file—once the temporary files are
removed, Subversion will let you commit the file even if it still contains conflict markers.
Commit Your Changes
Finally! Your edits are finished, you've merged all changes from the server, and you're ready to commit
your changes to the repository.
The svn commit command sends all of your changes to the repository. When you commit a change, you
need to supply a log message, describing your change. Your log message will be attached to the new revision you create. If your log message is brief, you may wish to supply it on the command line using the
36
Guided Tour
--message (or -m) option:
$ svn commit --message "Corrected number of cheese slices."
Sending
sandwich.txt
Transmitting file data .
Committed revision 3.
However, if you've been composing your log message as you work, you may want to tell Subversion to
get the message from a file by passing the filename with the --file switch:
$ svn commit --file logmsg
Sending
sandwich.txt
Transmitting file data .
Committed revision 4.
If you fail to specify either the --message or --file switch, then Subversion will automatically
launch your favorite editor (see the editor-cmd section in the section called “Config”) for composing
a log message.
Tip
If you're in your editor writing a commit message and decide that you want to cancel your
commit, you can just quit your editor without saving changes. If you've already saved your
commit message, simply delete the text and save again.
$ svn commit
Waiting for Emacs...Done
Log message unchanged or not specified
a)bort, c)ontinue, e)dit
a
$
The repository doesn't know or care if your changes make any sense as a whole; it only checks to make
sure that nobody else has changed any of the same files that you did when you weren't looking. If somebody has done that, the entire commit will fail with a message informing you that one or more of your
files is out-of-date:
$ svn commit --message "Add another rule"
Sending
rules.txt
svn: Commit failed (details follow):
svn: Out of date: 'rules.txt' in transaction 'g'
At this point, you need to run svn update, deal with any merges or conflicts that result, and attempt your
commit again.
That covers the basic work cycle for using Subversion. There are many other features in Subversion that
you can use to manage your repository and working copy, but you can get by quite easily using only the
commands that we've discussed so far in this chapter.
Examining History
37
Guided Tour
As we mentioned earlier, the repository is like a time machine. It keeps a record of every change ever
committed, and allows you to explore this history by examining previous versions of files and directories as well as the metadata that accompanies them. With a single Subversion command, you can check
out the repository (or restore an existing working copy) exactly as it was at any date or revision number
in the past. However, sometimes you just want to peer into the past instead of going into the past.
There are several commands that can provide you with historical data from the repository:
svn log
Shows you broad information: log messages with date and author information attached to revisions,
and which paths changed in each revision.
svn diff
Shows you the specific details of how a file changed over time.
svn cat
This is used to retrieve any file as it existed in a particular revision number and display it on your
screen.
svn list
Displays the files in a directory for any given revision.
svn log
To find information about the history of a file or directory, use the svn log command. svn log will
provide you with a record of who made changes to a file or directory, at what revision it changed, the
time and date of that revision, and, if it was provided, the log message that accompanied the commit.
$ svn log
-----------------------------------------------------------------------r3 | sally | Mon, 15 Jul 2002 18:03:46 -0500 | 1 line
Added include lines and corrected # of cheese slices.
-----------------------------------------------------------------------r2 | harry | Mon, 15 Jul 2002 17:47:57 -0500 | 1 line
Added main() methods.
-----------------------------------------------------------------------r1 | sally | Mon, 15 Jul 2002 17:40:08 -0500 | 1 line
Initial import
-----------------------------------------------------------------------Note that the log messages are printed in reverse chronological order by default. If you wish to see a
different range of revisions in a particular order, or just a single revision, pass the --revision (-r)
switch:
$ svn log --revision 5:19
# shows logs 5 through 19 in chronological order
$ svn log -r 19:5
# shows logs 5 through 19 in reverse order
$ svn log -r 8
# shows log for revision 8
You can also examine the log history of a single file or directory. For example:
38
Guided Tour
$ svn log foo.c
…
$ svn log http://foo.com/svn/trunk/code/foo.c
…
These will display log messages only for those revisions in which the working file (or URL) changed.
If you want even more information about a file or directory, svn log also takes a --verbose (-v)
switch. Because Subversion allows you to move and copy files and directories, it is important to be able
to track path changes in the filesystem, so in verbose mode, svn log will include a list of changed paths
in a revision in its output:
$ svn log -r 8 -v
-----------------------------------------------------------------------r8 | sally | 2002-07-14 08:15:29 -0500 | 1 line
Changed paths:
M /trunk/code/foo.c
M /trunk/code/bar.h
A /trunk/code/doc/README
Frozzled the sub-space winch.
-----------------------------------------------------------------------svn log also takes a --quiet (-q) switch, which suppresses the body of the log message. When combined with --verbose, it gives just the names of the changed files.
Why Does svn log Give Me an Empty Response?
After working with Subversion for a bit, most users will come across something like this:
$ svn log -r 2
-----------------------------------------------------------------------$
At first glance, this seems like an error. But recall that while revisions are repository-wide, svn
log operates on a path in the repository. If you supply no path, Subversion uses the current working directory as the default target. As a result, if you're operating in a subdirectory of your working copy and attempt to see the log of a revision in which neither that directory nor any of its children was changed, Subversion will show you an empty log. If you want to see what changed in
that revision, try pointing svn log directly at the top-most URL of your repository, as in svn log -r
2 http://svn.collab.net/repos/svn.
svn diff
We've already seen svn diff before—it displays file differences in unified diff format; it was used to
show the local modifications made to our working copy before committing to the repository.
In fact, it turns out that there are three distinct uses of svn diff:
• Examine local changes
39
Guided Tour
• Compare your working copy to the repository
• Compare repository to repository
Examining Local Changes
As we've seen, invoking svn diff with no switches will compare your working files to the cached
“pristine” copies in the .svn area:
$ svn diff
Index: rules.txt
===================================================================
--- rules.txt (revision 3)
+++ rules.txt (working copy)
@@ -1,4 +1,5 @@
Be kind to others
Freedom = Responsibility
Everything in moderation
-Chew with your mouth open
+Chew with your mouth closed
+Listen when others are speaking
$
Comparing Working Copy to Repository
If a single --revision (-r) number is passed, then your working copy is compared to the specified
revision in the repository.
$ svn diff --revision 3 rules.txt
Index: rules.txt
===================================================================
--- rules.txt (revision 3)
+++ rules.txt (working copy)
@@ -1,4 +1,5 @@
Be kind to others
Freedom = Responsibility
Everything in moderation
-Chew with your mouth open
+Chew with your mouth closed
+Listen when others are speaking
$
Comparing Repository to Repository
If two revision numbers, separated by a colon, are passed via --revision (-r), then the two revisions are directly compared.
$ svn diff --revision 2:3 rules.txt
Index: rules.txt
===================================================================
--- rules.txt (revision 2)
+++ rules.txt (revision 3)
@@ -1,4 +1,4 @@
Be kind to others
-Freedom = Chocolate Ice Cream
40
Guided Tour
+Freedom = Responsibility
Everything in moderation
Chew with your mouth open
$
Not only can you use svn diff to compare files in your working copy to the repository, but if you supply
a URL argument, you can examine the differences between items in the repository without even having
a working copy. This is especially useful if you wish to inspect changes in a file when you don't have a
working copy on your local machine:
$ svn diff --revision 4:5 http://svn.red-bean.com/repos/example/trunk/text/rules.tx
…
$
svn cat
If you want to examine an earlier version of a file and not necessarily the differences between two files,
you can use svn cat:
$ svn cat --revision 2 rules.txt
Be kind to others
Freedom = Chocolate Ice Cream
Everything in moderation
Chew with your mouth open
$
You can also redirect the output directly into a file:
$ svn cat --revision 2 rules.txt > rules.txt.v2
$
You're probably wondering why we don't just use svn update --revision to update the file to the older
revision. There are a few reasons why we might prefer to use svn cat.
First, you may want to see the differences between two revisions of a file using an external diff program
(perhaps a graphical one, or perhaps your file is in such a format that the output of unified diff is nonsensical). In this case, you'll need to grab a copy of the old revision, redirect it to a file, and pass both
that and the file in your working copy to your external diff program.
Sometimes it's easier to look at an older version of a file in its entirety as opposed to just the differences
between it and another revision.
svn list
The svn list command shows you what files are in a repository directory without actually downloading
the files to your local machine:
$ svn list http://svn.collab.net/repos/svn
README
branches/
clients/
tags/
41
Guided Tour
trunk/
If you want a more detailed listing, pass the --verbose (-v) flag to get output like this:
$ svn list --verbose http://svn.collab.net/repos/svn
2755 harry
1331 Jul 28 02:07 README
2773 sally
Jul 29 15:07 branches/
2769 sally
Jul 29 12:07 clients/
2698 harry
Jul 24 18:07 tags/
2785 sally
Jul 29 19:07 trunk/
The columns tell you the revision at which the file or directory was last modified, the user who modified
it, the size if it is a file, the date it was last modified, and the item's name.
A Final Word on History
In addition to all of the above commands, you can use svn update and svn checkout with the -revision switch to take an entire working copy “back in time” 5:
$ svn checkout --revision 1729 # Checks out a new working copy at r1729
…
$ svn update --revision 1729 # Updates an existing working copy to r1729
…
Other Useful Commands
While not as frequently used as the commands previously discussed in this chapter, you will occasionally need these commands.
svn cleanup
When Subversion modifies your working copy (or any information within .svn), it tries to do so as
safely as possible. Before changing the working copy, Subversion writes its intentions to a log file. Next
it executes the commands in the log file to apply the requested change, holding a lock on the relevant
part of the working copy while it works — to prevent other Subversion clients from accessing the working copy in mid-change. Finally, Subversion removes the log file. Architecturally, this is similar to a
journaled filesystem. If a Subversion operation is interrupted (if the process is killed, or if the machine
crashes, for example), the log files remain on disk. By re-executing the log files, Subversion can complete the previously started operation, and your working copy can get itself back into a consistent state.
And this is exactly what svn cleanup does: it searches your working copy and runs any leftover logs, removing working copy locks in the process. If Subversion ever tells you that some part of your working
copy is “locked”, then this is the command that you should run. Also, svn status will display an L next
to locked items:
$ svn status
L
somedir
M
somedir/foo.c
5
See? We told you that Subversion was a time machine.
42
Guided Tour
$ svn cleanup
$ svn status
M
somedir/foo.c
Don't confuse these working copy locks with the ordinary locks that Subversion users create when using
the “lock-modify-unlock” model of concurrent version control; see Three meanings of “lock” for clarification.
svn import
The svn import command is a quick way to copy an unversioned tree of files into a repository, creating
intermediate directories as necessary.
$ svnadmin create /usr/local/svn/newrepos
$ svn import mytree file:///usr/local/svn/newrepos/some/project \
-m "Initial import"
Adding
mytree/foo.c
Adding
mytree/bar.c
Adding
mytree/subdir
Adding
mytree/subdir/quux.h
Committed revision 1.
The previous example copied the contents of directory mytree under the directory some/project in
the repository:
$ svn list file:///usr/local/svn/newrepos/some/project
bar.c
foo.c
subdir/
Note that after the import is finished, the original tree is not converted into a working copy. To start
working, you still need to svn checkout a fresh working copy of the tree.
Summary
Now we've covered most of the Subversion client commands. Notable exceptions are those dealing with
branching and merging (see Chapter 4, Branching and Merging) and properties (see the section called
“Properties”). However, you may want to take a moment to skim through Chapter 9, Subversion Complete Reference to get an idea of all the many different commands that Subversion has—and how you
can use them to make your work easier.
43
Chapter 4. Branching and Merging
Branching, tagging, and merging are concepts common to almost all version control systems. If you're
not familiar with these ideas, we provide a good introduction in this chapter. If you are familiar, then
hopefully you'll find it interesting to see how Subversion implements these ideas.
Branching is a fundamental part of version control. If you're going to allow Subversion to manage your
data, then this is a feature you'll eventually come to depend on. This chapter assumes that you're already
familiar with Subversion's basic concepts (Chapter 2, Basic Concepts).
What's a Branch?
Suppose it's your job to maintain a document for a division in your company, a handbook of some sort.
One day a different division asks you for the same handbook, but with a few parts “tweaked” for them,
since they do things slightly differently.
What do you do in this situation? You do the obvious thing: you make a second copy of your document,
and begin maintaining the two copies separately. As each department asks you to make small changes,
you incorporate them into one copy or the other.
You often want to make the same change to both copies. For example, if you discover a typo in the first
copy, it's very likely that the same typo exists in the second copy. The two documents are almost the
same, after all; they only differ in small, specific ways.
This is the basic concept of a branch—namely, a line of development that exists independently of another line, yet still shares a common history if you look far enough back in time. A branch always begins
life as a copy of something, and moves on from there, generating its own history (see Figure 4.1,
“Branches of development”).
Figure 4.1. Branches of development
Subversion has commands to help you maintain parallel branches of your files and directories. It allows
you to create branches by copying your data, and remembers that the copies are related to one another. It
also helps you duplicate changes from one branch to another. Finally, it can make portions of your
working copy reflect different branches, so that you can “mix and match” different lines of development
in your daily work.
Using Branches
44
Branching and Merging
At this point, you should understand how each commit creates an entire new filesystem tree (called a
“revision”) in the repository. If not, go back and read about revisions in the section called “Revisions”.
For this chapter, we'll go back to the same example from Chapter 2, Basic Concepts. Remember that you
and your collaborator, Sally, are sharing a repository that contains two projects, paint and calc. Notice that in Figure 4.2, “Starting repository layout”, however, each project directory now contains subdirectories named trunk and branches. The reason for this will soon become clear.
Figure 4.2. Starting repository layout
As before, assume that Sally and you both have working copies of the “calc” project. Specifically, you
each have a working copy of /calc/trunk. All the files for the project are in this subdirectory rather
than in /calc itself, because your team has decided that /calc/trunk is where the “main line” of
development is going to take place.
Let's say that you've been given the task of performing a radical reorganization of the project. It will take
a long time to write, and will affect all the files in the project. The problem here is that you don't want to
interfere with Sally, who is in the process of fixing small bugs here and there. She's depending on the
fact that the latest version of the project (in /calc/trunk) is always usable. If you start committing
your changes bit-by-bit, you'll surely break things for Sally.
One strategy is to crawl into a hole: you and Sally can stop sharing information for a week or two. That
is, start gutting and reorganizing all the files in your working copy, but don't commit or update until
you're completely finished with the task. There are a number of problems with this, though. First, it's not
very safe. Most people like to save their work to the repository frequently, should something bad accidentally happen to their working copy. Second, it's not very flexible. If you do your work on different
computers (perhaps you have a working copy of /calc/trunk on two different machines), you'll
need to manually copy your changes back and forth, or just do all the work on a single computer. By that
45
Branching and Merging
same token, it's difficult to share your changes-in-progress with anyone else. A common software development “best practice” is to allow your peers to review your work as you go. If nobody sees your intermediate commits, you lose potential feedback. Finally, when you're finished with all your changes, you
might find it very difficult to re-merge your final work with the rest of the company's main body of
code. Sally (or others) may have made many other changes in the repository that are difficult to incorporate into your working copy—especially if you run svn update after weeks of isolation.
The better solution is to create your own branch, or line of development, in the repository. This allows
you to save your half-broken work frequently without interfering with others, yet you can still selectively share information with your collaborators. You'll see exactly how this works later on.
Creating a Branch
Creating a branch is very simple—you make a copy of the project in the repository using the svn copy
command. Subversion is not only able to copy single files, but whole directories as well. In this case,
you want to make a copy of the /calc/trunk directory. Where should the new copy live? Wherever
you wish—it's a matter of project policy. Let's say that your team has a policy of creating branches in
the /calc/branches area of the repository, and you want to name your branch my-calc-branch.
You'll want to create a new directory, /calc/branches/my-calc-branch, which begins its life
as a copy of /calc/trunk.
There are two different ways to make a copy. We'll demonstrate the messy way first, just to make the
concept clear. To begin, check out a working copy of the project's root directory, /calc:
$ svn checkout http://svn.example.com/repos/calc bigwc
A bigwc/trunk/
A bigwc/trunk/Makefile
A bigwc/trunk/integer.c
A bigwc/trunk/button.c
A bigwc/branches/
Checked out revision 340.
Making a copy is now simply a matter of passing two working-copy paths to the svn copy command:
$ cd bigwc
$ svn copy trunk branches/my-calc-branch
$ svn status
A +
branches/my-calc-branch
In this case, the svn copy command recursively copies the trunk working directory to a new working
directory, branches/my-calc-branch. As you can see from the svn status command, the new
directory is now scheduled for addition to the repository. But also notice the “+” sign next to the letter
A. This indicates that the scheduled addition is a copy of something, not something new. When you
commit your changes, Subversion will create /calc/branches/my-calc-branch in the repository by copying /calc/trunk, rather than resending all of the working copy data over the network:
$ svn commit -m "Creating a private branch of /calc/trunk."
Adding
branches/my-calc-branch
Committed revision 341.
And now the easier method of creating a branch, which we should have told you about in the first place:
svn copy is able to operate directly on two URLs.
$ svn copy http://svn.example.com/repos/calc/trunk \
46
Branching and Merging
http://svn.example.com/repos/calc/branches/my-calc-branch \
-m "Creating a private branch of /calc/trunk."
Committed revision 341.
There's really no difference between these two methods. Both procedures create a new directory in revision 341, and the new directory is a copy of /calc/trunk. This is shown in Figure 4.3, “Repository
with new copy”. Notice that the second method, however, performs an immediate commit. 1 It's an easier procedure, because it doesn't require you to check out a large mirror of the repository. In fact, this
technique doesn't even require you to have a working copy at all.
Figure 4.3. Repository with new copy
Cheap Copies
Subversion's repository has a special design. When you copy a directory, you don't need to worry
about the repository growing huge—Subversion doesn't actually duplicate any data. Instead, it
creates a new directory entry that points to an existing tree. If you're a Unix user, this is the same
concept as a hard-link. From there, the copy is said to be “lazy”. That is, if you commit a change
to one file within the copied directory, then only that file changes—the rest of the files continue to
1
Subversion does not support cross-repository copying. When using URLs with svn copy or svn move, you can only copy items
within the same repository.
47
Branching and Merging
exist as links to the original files in the original directory.
This is why you'll often hear Subversion users talk about “cheap copies”. It doesn't matter how
large the directory is—it takes a very tiny, constant amount of time to make a copy of it. In fact,
this feature is the basis of how commits work in Subversion: each revision is a “cheap copy” of
the previous revision, with a few items lazily changed within. (To read more about this, visit Subversion's website and read about the “bubble up” method in Subversion's design documents.)
Of course, these internal mechanics of copying and sharing data are hidden from the user, who
simply sees copies of trees. The main point here is that copies are cheap, both in time and space.
Make branches as often as you want.
Working with Your Branch
Now that you've created a branch of the project, you can check out a new working copy to start using it:
$ svn checkout http://svn.example.com/repos/calc/branches/my-calc-branch
A my-calc-branch/Makefile
A my-calc-branch/integer.c
A my-calc-branch/button.c
Checked out revision 341.
There's nothing special about this working copy; it simply mirrors a different directory in the repository.
When you commit changes, however, Sally won't ever see them when she updates. Her working copy is
of /calc/trunk. (Be sure to read the section called “Switching a Working Copy” later in this
chapter: the svn switch command is an alternate way of creating a working copy of a branch.)
Let's pretend that a week goes by, and the following commits happen:
• You make a change to /calc/branches/my-calc-branch/button.c, which creates revision 342.
• You make a change to /calc/branches/my-calc-branch/integer.c, which creates revision 343.
• Sally makes a change to /calc/trunk/integer.c, which creates revision 344.
There are now two independent lines of development, shown in Figure 4.4, “The branching of one file's
history”, happening on integer.c.
Figure 4.4. The branching of one file's history
48
Branching and Merging
Things get interesting when you look at the history of changes made to your copy of integer.c:
$ pwd
/home/user/my-calc-branch
$ svn log --verbose integer.c
-----------------------------------------------------------------------r343 | user | 2002-11-07 15:27:56 -0600 (Thu, 07 Nov 2002) | 2 lines
Changed paths:
M /calc/branches/my-calc-branch/integer.c
* integer.c:
frozzled the wazjub.
-----------------------------------------------------------------------r341 | user | 2002-11-03 15:27:56 -0600 (Thu, 07 Nov 2002) | 2 lines
Changed paths:
A /calc/branches/my-calc-branch (from /calc/trunk:340)
Creating a private branch of /calc/trunk.
-----------------------------------------------------------------------r303 | sally | 2002-10-29 21:14:35 -0600 (Tue, 29 Oct 2002) | 2 lines
Changed paths:
M /calc/trunk/integer.c
* integer.c:
changed a docstring.
-----------------------------------------------------------------------r98 | sally | 2002-02-22 15:35:29 -0600 (Fri, 22 Feb 2002) | 2 lines
Changed paths:
M /calc/trunk/integer.c
* integer.c:
adding this file to the project.
-----------------------------------------------------------------------Notice that Subversion is tracing the history of your branch's integer.c all the way back through
time, even traversing the point where it was copied. It shows the creation of the branch as an event in the
history, because integer.c was implicitly copied when all of /calc/trunk/ was copied. Now
look what happens when Sally runs the same command on her copy of the file:
$ pwd
/home/sally/calc
49
Branching and Merging
$ svn log --verbose integer.c
-----------------------------------------------------------------------r344 | sally | 2002-11-07 15:27:56 -0600 (Thu, 07 Nov 2002) | 2 lines
Changed paths:
M /calc/trunk/integer.c
* integer.c:
fix a bunch of spelling errors.
-----------------------------------------------------------------------r303 | sally | 2002-10-29 21:14:35 -0600 (Tue, 29 Oct 2002) | 2 lines
Changed paths:
M /calc/trunk/integer.c
* integer.c:
changed a docstring.
-----------------------------------------------------------------------r98 | sally | 2002-02-22 15:35:29 -0600 (Fri, 22 Feb 2002) | 2 lines
Changed paths:
M /calc/trunk/integer.c
* integer.c:
adding this file to the project.
-----------------------------------------------------------------------Sally sees her own revision 344 change, but not the change you made in revision 343. As far as Subversion is concerned, these two commits affected different files in different repository locations. However,
Subversion does show that the two files share a common history. Before the branch-copy was made in
revision 341, they used to be the same file. That's why you and Sally both see the changes made in revisions 303 and 98.
The Key Concepts Behind Branches
There are two important lessons that you should remember from this section.
1. Unlike many other version control systems, Subversion's branches exist as normal filesystem directories in the repository, not in an extra dimension. These directories just happen to carry some extra
historical information.
2. Subversion has no internal concept of a branch—only copies. When you copy a directory, the resulting directory is only a “branch” because you attach that meaning to it. You may think of the directory
differently, or treat it differently, but to Subversion it's just an ordinary directory that happens to have
been created by copying.
Copying Changes Between Branches
Now you and Sally are working on parallel branches of the project: you're working on a private branch,
and Sally is working on the trunk, or main line of development.
For projects that have a large number of contributors, it's common for most people to have working copies of the trunk. Whenever someone needs to make a long-running change that is likely to disrupt the
trunk, a standard procedure is to create a private branch and commit changes there until all the work is
complete.
So, the good news is that you and Sally aren't interfering with each other. The bad news is that it's very
easy to drift too far apart. Remember that one of the problems with the “crawl in a hole” strategy is that
by the time you're finished with your branch, it may be near-impossible to merge your changes back into
50
Branching and Merging
the trunk without a huge number of conflicts.
Instead, you and Sally might continue to share changes as you work. It's up to you to decide which
changes are worth sharing; Subversion gives you the ability to selectively “copy” changes between
branches. And when you're completely finished with your branch, your entire set of branch changes can
be copied back into the trunk.
Copying Specific Changes
In the previous section, we mentioned that both you and Sally made changes to integer.c on different branches. If you look at Sally's log message for revision 344, you can see that she fixed some
spelling errors. No doubt, your copy of the same file still has the same spelling errors. It's likely that
your future changes to this file will be affecting the same areas that have the spelling errors, so you're in
for some potential conflicts when you merge your branch someday. It's better, then, to receive Sally's
change now, before you start working too heavily in the same places.
It's time to use the svn merge command. This command, it turns out, is a very close cousin to the svn
diff command (which you read about in Chapter 3, Guided Tour). Both commands are able to compare
any two objects in the repository and describe the differences. For example, you can ask svn diff to
show you the exact change made by Sally in revision 344:
$ svn diff -r 343:344 http://svn.example.com/repos/calc/trunk
Index: integer.c
===================================================================
--- integer.c (revision 343)
+++ integer.c (revision 344)
@@ -147,7 +147,7 @@
case 6: sprintf(info->operating_system, "HPFS (OS/2 or NT)"); break;
case 7: sprintf(info->operating_system, "Macintosh"); break;
case 8: sprintf(info->operating_system, "Z-System"); break;
case 9: sprintf(info->operating_system, "CPM"); break;
+
case 9: sprintf(info->operating_system, "CP/M"); break;
case 10: sprintf(info->operating_system, "TOPS-20"); break;
case 11: sprintf(info->operating_system, "NTFS (Windows NT)"); break;
case 12: sprintf(info->operating_system, "QDOS"); break;
@@ -164,7 +164,7 @@
low = (unsigned short) read_byte(gzfile); /* read LSB */
high = (unsigned short) read_byte(gzfile); /* read MSB */
high = high << 8; /* interpret MSB correctly */
total = low + high; /* add them togethe for correct total */
+
total = low + high; /* add them together for correct total */
info->extra_header = (unsigned char *) my_malloc(total);
fread(info->extra_header, total, 1, gzfile);
@@ -241,7 +241,7 @@
Store the offset with ftell() ! */
+
if ((info->data_offset = ftell(gzfile))== -1) {
printf("error: ftell() retturned -1.\n");
printf("error: ftell() returned -1.\n");
exit(1);
}
@@ -249,7 +249,7 @@
printf("I believe start of compressed data is %u\n", info->data_offset);
#endif
+
/* Set postion eight bytes from the end of the file. */
/* Set position eight bytes from the end of the file. */
51
Branching and Merging
if (fseek(gzfile, -8, SEEK_END)) {
printf("error: fseek() returned non-zero\n");
The svn merge command is almost exactly the same. Instead of printing the differences to your terminal, however, it applies them directly to your working copy as local modifications:
$ svn merge -r 343:344 http://svn.example.com/repos/calc/trunk
U integer.c
$ svn status
M integer.c
The output of svn merge shows that your copy of integer.c was patched. It now contains Sally's
change—the change has been “copied” from the trunk to your working copy of your private branch, and
now exists as a local modification. At this point, it's up to you to review the local modification and make
sure it works correctly.
In another scenario, it's possible that things may not have gone so well, and that integer.c may have
entered a conflicted state. You might need to resolve the conflict using standard procedures (see
Chapter 3, Guided Tour), or if you decide that the merge was a bad idea altogether, simply give up and
svn revert the local change.
But assuming that you've reviewed the merged change, you can svn commit the change as usual. At that
point, the change has been merged into your repository branch. In version control terminology, this act
of copying changes between branches is commonly called porting changes.
When you commit the local modification, make sure your log message mentions that you're porting a
specific change from one branch to another. For example:
$ svn commit -m "integer.c: ported r344 (spelling fixes) from trunk."
Sending
integer.c
Transmitting file data .
Committed revision 360.
As you'll see in the next sections, this is a very important “best practice” to follow.
Why Not Use Patches Instead?
A question may be on your mind, especially if you're a Unix user: why bother to use svn merge at
all? Why not simply use the operating system's patch command to accomplish the same job? For
example:
$ svn diff -r 343:344 http://svn.example.com/repos/calc/trunk > patchfile
$ patch -p0 < patchfile
Patching file integer.c using Plan A...
Hunk #1 succeeded at 147.
Hunk #2 succeeded at 164.
Hunk #3 succeeded at 241.
Hunk #4 succeeded at 249.
done
In this particular case, yes, there really is no difference. But svn merge has special abilities that
surpass the patch program. The file format used by patch is quite limited; it's only able to tweak
52
Branching and Merging
file contents. There's no way to represent changes to trees, such as the addition, removal, or renaming of files and directories. If Sally's change had, say, added a new directory, the output of
svn diff wouldn't have mentioned it at all. svn diff only outputs the limited patch-format, so there
are some ideas it simply can't express. 2 The svn merge command, however, can express changes
in tree structure and properties by directly applying them to your working copy.
A word of warning: while svn diff and svn merge are very similar in concept, they do have different
syntax in many cases. Be sure to read about them in Chapter 9, Subversion Complete Reference for details, or ask svn help. For example, svn merge requires a working-copy path as a target, i.e. a place
where it should apply the tree-changes. If the target isn't specified, it assumes you are trying to perform
one of the following common operations:
1. You want to merge directory changes into your current working directory.
2. You want to merge the changes in a specific file into a file by the same name which exists in your
current working directory.
If you are merging a directory and haven't specified a target path, svn merge assumes the first case
above and tries to apply the changes into your current directory. If you are merging a file, and that file
(or a file by the same name) exists in your current working directory, svn merge assumes the second
case and tries to apply the changes to a local file with the same name.
If you want changes applied somewhere else, you'll need to say so. For example, if you're sitting in the
parent directory of your working copy, you'll have to specify the target directory to receive the changes:
$ svn merge -r 343:344 http://svn.example.com/repos/calc/trunk my-calc-branch
U
my-calc-branch/integer.c
The Key Concept Behind Merging
You've now seen an example of the svn merge command, and you're about to see several more. If you're
feeling confused about exactly how merging works, you're not alone. Many users (especially those new
to version control) are initially perplexed about the proper syntax of the command, and about how and
when the feature should be used. But fear not, this command is actually much simpler than you think!
There's a very easy technique for understanding exactly how svn merge behaves.
The main source of confusion is the name of the command. The term “merge” somehow denotes that
branches are combined together, or that there's some sort of mysterious blending of data going on. That's
not the case. A better name for the command might have been svn diff-and-apply, because that's all that
happens: two repository trees are compared, and the differences are applied to a working copy.
The command takes three arguments:
1. An initial repository tree (often called the left side of the comparison),
2. A final repository tree (often called the right side of the comparison),
3. A working copy to accept the differences as local changes (often called the target of the merge).
2
In the future, the Subversion project plans to use (or invent) an expanded patch format that describes changes in tree structure
and properties.
53
Branching and Merging
Once these three arguments are specified, the two trees are compared, and the resulting differences are
applied to the target working copy as local modifications. When the command is done, the results are no
different than if you had hand-edited the files, or run various svn add or svn delete commands yourself.
If you like the results, you can commit them. If you don't like the results, you can simply svn revert all
of the changes.
The syntax of svn merge allows you to specify the three necessary arguments rather flexibly. Here are
some examples:
$ svn merge http://svn.example.com/repos/branch1@150 \
http://svn.example.com/repos/branch2@212 \
my-working-copy
$ svn merge -r 100:200 http://svn.example.com/repos/trunk my-working-copy
$ svn merge -r 100:200 http://svn.example.com/repos/trunk
The first syntax lays out all three arguments explicitly, naming each tree in the form URL@REV and
naming the working copy target. The second syntax can be used as a shorthand for situations when
you're comparing two different revisions of the same URL. The last syntax shows how the workingcopy argument is optional; if omitted, it defaults to the current directory.
Best Practices for Merging
Tracking Merges Manually
Merging changes sounds simple enough, but in practice it can become a headache. The problem is that if
you repeatedly merge changes from one branch to another, you might accidentally merge the same
change twice. When this happens, sometimes things will work fine. When patching a file, Subversion
typically notices if the file already has the change, and does nothing. But if the already-existing change
has been modified in any way, you'll get a conflict.
Ideally, your version control system should prevent the double-application of changes to a branch. It
should automatically remember which changes a branch has already received, and be able to list them
for you. It should use this information to help automate merges as much as possible.
Unfortunately, Subversion is not such a system. Like CVS, Subversion does not yet record any information about merge operations. When you commit local modifications, the repository has no idea whether
those changes came from running svn merge, or from just hand-editing the files.
What does this mean to you, the user? It means that until the day Subversion grows this feature, you'll
have to track merge information yourself. The best place to do this is in the commit log-message. As
demonstrated in the earlier example, it's recommended that your log-message mention a specific revision number (or range of revisions) that are being merged into your branch. Later on, you can run svn
log to review which changes your branch already contains. This will allow you to carefully construct a
subsequent svn merge command that won't be redundant with previously ported changes.
In the next section, we'll show some examples of this technique in action.
Previewing Merges
Because merging only results in local modifications, it's not usually a high-risk operation. If you get the
merge wrong the first time, simply svn revert the changes and try again.
It's possible, however, that your working copy might already have local modifications. The changes applied by a merge will be mixed with your pre-existing ones, and running svn revert is no longer an op54
Branching and Merging
tion. The two sets of changes may be impossible to separate.
In cases like this, people take comfort in being able to predict or examine merges before they happen.
One simple way to do that is to run svn diff with the same arguments you plan to pass to svn merge, as
we already showed in our first example of merging. Another method of previewing is to pass the -dry-run option to the merge command:
$ svn merge --dry-run -r 343:344 http://svn.example.com/repos/calc/trunk
U integer.c
$ svn status
# nothing printed, working copy is still unchanged.
The --dry-run option doesn't actually apply any local changes to the working copy. It only shows
status codes that would be printed in a real merge. It's useful for getting a “high level” preview of the potential merge, for those times when running svn diff gives too much detail.
Subversion and Changesets
Everyone seems to have a slightly different definition of “changeset”, or at least a different expectation of what it means for a version control system to have “changeset features”. For our purpose, let's say that a changeset is just a collection of changes with a unique name. The changes
might include textual edits to file contents, modifications to tree structure, or tweaks to metadata.
In more common speak, a changeset is just a patch with a name you can refer to.
In Subversion, a global revision number N names a tree in the repository: it's the way the repository looked after the Nth commit. It's also the name of an implicit changeset: if you compare tree
N with tree N-1, you can derive the exact patch that was committed. For this reason, it's easy to
think of “revision N” as not just a tree, but a changeset as well. If you use an issue tracker to manage bugs, you can use the revision numbers to refer to particular patches that fix bugs—for example, “this issue was fixed by revision 9238.”. Somebody can then run svn log -r9238 to read
about the exact changeset which fixed the bug, and run svn diff -r9237:9238 to see the patch itself. And Subversion's merge command also uses revision numbers. You can merge specific
changesets from one branch to another by naming them in the merge arguments: svn merge r9237:9238 would merge changeset #9238 into your working copy.
Merge Conflicts
Just like the svn update command, svn merge applies changes to your working copy. And therefore it's
also capable of creating conflicts. The conflicts produced by svn merge, however, are sometimes different, and this section explains those differences.
To begin with, assume that your working copy has no local edits. When you svn update to a particular
revision, the changes sent by the server will always apply “cleanly” to your working copy. The server
produces the delta by comparing two trees: a virtual snapshot of your working copy, and the revision
tree you're interested in. Because the left-hand side of the comparison is exactly equal to what you
already have, the delta is guaranteed to correctly convert your working copy into the right-hand tree.
But svn merge has no such guarantees and can be much more chaotic: the user can ask the server to
compare any two trees at all, even ones that are unrelated to the working copy! This means there's large
potential for human error. Users will sometimes compare the wrong two trees, creating a delta that
doesn't apply cleanly. svn merge will do its best to apply as much of the delta as possible, but some
parts may be impossible. Just like the Unix patch command sometimes complains about “failed hunks”,
svn merge will complain about “skipped targets”:
55
Branching and Merging
$ svn merge -r 1288:1351 http://svn.example.com/repos/branch
U foo.c
U bar.c
Skipped missing target: 'baz.c'
U glub.c
C glorb.h
$
In the previous example it might be the case that baz.c exists in both snapshots of the branch being
compared, and the resulting delta wants to change the file's contents, but the file doesn't exist in the
working copy. Whatever the case, the “skipped” message means that the user is most likely comparing
the wrong two trees; they're the classic sign of driver error. When this happens, it's easy to recursively
revert all the changes created by the merge (svn revert --recursive), delete any unversioned files or directories left behind after the revert, and re-run svn merge with different arguments.
Also notice that the previous example shows a conflict happening on glorb.h. We already stated that
the working copy has no local edits: how can a conflict possibly happen? Again, because the user can
use svn merge to define and apply any old delta to the working copy, that delta may contain textual
changes that don't cleanly apply to a working file, even if the file has no local modifications.
Another small difference between svn update and svn merge are the names of the full-text files created
when a conflict happens. In the section called “Resolve Conflicts (Merging Others' Changes)”, we saw
that an update produces files named filename.mine, filename.rOLDREV, and filename.rNEWREV. When svn merge produces a conflict, though, it creates three files named filename.working, filename.left, and filename.right. In this case, the terms “left” and
“right” are describing which side of the double-tree comparison the file came from. In any case, these
differing names will help you distinguish between conflicts that happened as a result of an update versus
ones that happened as a result of a merge.
Noticing or Ignoring Ancestry
When conversing with a Subversion developer, you might very likely hear reference to the term
ancestry. This word is used to describe the relationship between two objects in a repository: if they're related to each other, then one object is said to be an ancestor of the other.
For example, suppose you commit revision 100, which includes a change to a file foo.c. Then
foo.c@99 is an “ancestor” of foo.c@100. On the other hand, suppose you commit the deletion of
foo.c in revision 101, and then add a new file by the same name in revision 102. In this case,
foo.c@99 and foo.c@102 may appear to be related (they have the same path), but in fact are completely different objects in the repository. They share no history or “ancestry”.
The reason for bringing this up is to point out an important difference between svn diff and svn merge.
The former command ignores ancestry, while the latter command is quite sensitive to it. For example, if
you asked svn diff to compare revisions 99 and 102 of foo.c, you would see line-based diffs; the
diff command is blindly comparing two paths. But if you asked svn merge to compare the same two
objects, it would notice that they're unrelated and first attempt to delete the old file, then add the new
file; the output would indicate a deletion followed by an add:
D
A
foo.c
foo.c
Most merges involve comparing trees that are ancestrally related to one another, and therefore svn
merge defaults to this behavior. Occasionally, however, you may want the merge command to compare two unrelated trees. For example, you may have imported two source-code trees representing dif56
Branching and Merging
ferent vendor releases of a software project (see the section called “Vendor branches”). If you asked svn
merge to compare the two trees, you'd see the entire first tree being deleted, followed by an add of the
entire second tree!
In these situations, you'll want svn merge to do a path-based comparison only, ignoring any relations
between files and directories. Add the --ignore-ancestry option to your merge command, and it
will behave just like svn diff. (And conversely, the --notice-ancestry option will cause svn diff
to behave like the merge command.)
Common Use-Cases
There are many different uses for branching and svn merge, and this section describes the most common ones you're likely to run into.
Merging a Whole Branch to Another
To complete our running example, we'll move forward in time. Suppose several days have passed, and
many changes have happened on both the trunk and your private branch. Suppose that you've finished
working on your private branch; the feature or bug fix is finally complete, and now you want to merge
all of your branch changes back into the trunk for others to enjoy.
So how do we use svn merge in this scenario? Remember that this command compares two trees, and
applies the differences to a working copy. So to receive the changes, you need to have a working copy
of the trunk. We'll assume that either you still have your original one lying around (fully updated), or
that you recently checked out a fresh working copy of /calc/trunk.
But which two trees should be compared? At first glance, the answer may seem obvious: just compare
the latest trunk tree with your latest branch tree. But beware—this assumption is wrong, and has burned
many a new user! Since svn merge operates like svn diff, comparing the latest trunk and branch trees
will not merely describe the set of changes you made to your branch. Such a comparison shows too
many changes: it would not only show the addition of your branch changes, but also the removal of
trunk changes that never happened on your branch.
To express only the changes that happened on your branch, you need to compare the initial state of your
branch to its final state. Using svn log on your branch, you can see that your branch was created in revision 341. And the final state of your branch is simply a matter of using the HEAD revision. That means
you want to compare revisions 341 and HEAD of your branch directory, and apply those differences to a
working copy of the trunk.
Tip
A nice way of finding the revision in which a branch was created (the “base” of the
branch) is to use the --stop-on-copy option to svn log. The log subcommand will
normally show every change ever made to the branch, including tracing back through the
copy which created the branch. So normally, you'll see history from the trunk as well. The
--stop-on-copy will halt log output as soon as svn log detects that its target was
copied or renamed.
So in our continuing example,
$ svn log --verbose --stop-on-copy \
http://svn.example.com/repos/calc/branches/my-calc-branch
…
-----------------------------------------------------------------------r341 | user | 2002-11-03 15:27:56 -0600 (Thu, 07 Nov 2002) | 2 lines
Changed paths:
A /calc/branches/my-calc-branch (from /calc/trunk:340)
57
Branching and Merging
$
As expected, the final revision printed by this command is the revision in which mycalc-branch was created by copying.
Here's the final merging procedure, then:
$ cd calc/trunk
$ svn update
At revision 405.
$ svn merge -r 341:405 http://svn.example.com/repos/calc/branches/my-calc-branch
U
integer.c
U
button.c
U
Makefile
$ svn status
M
integer.c
M
button.c
M
Makefile
# ...examine the diffs, compile, test, etc...
$ svn commit -m "Merged my-calc-branch changes r341:405 into the trunk."
Sending
integer.c
Sending
button.c
Sending
Makefile
Transmitting file data ...
Committed revision 406.
Again, notice that the commit log message very specifically mentions the range of changes that was
merged into the trunk. Always remember to do this, because it's critical information you'll need later on.
For example, suppose you decide to keep working on your branch for another week, in order to complete an enhancement to your original feature or bug fix. The repository's HEAD revision is now 480, and
you're ready to do another merge from your private branch to the trunk. But as discussed in the section
called “Best Practices for Merging”, you don't want to merge the changes you've already merged before;
you only want to merge everything “new” on your branch since the last time you merged. The trick is to
figure out what's new.
The first step is to run svn log on the trunk, and look for a log message about the last time you merged
from the branch:
$ cd calc/trunk
$ svn log
…
-----------------------------------------------------------------------r406 | user | 2004-02-08 11:17:26 -0600 (Sun, 08 Feb 2004) | 1 line
Merged my-calc-branch changes r341:405 into the trunk.
-----------------------------------------------------------------------…
Aha! Since all branch-changes that happened between revisions 341 and 405 were previously merged to
58
Branching and Merging
the trunk as revision 406, you now know that you want to merge only the branch changes after that—by
comparing revisions 406 and HEAD.
$ cd calc/trunk
$ svn update
At revision 480.
# We notice that HEAD is currently 480, so we use it to do the merge:
$ svn merge -r 406:480 http://svn.example.com/repos/calc/branches/my-calc-branch
U
integer.c
U
button.c
U
Makefile
$ svn commit -m "Merged my-calc-branch changes r406:480 into the trunk."
Sending
integer.c
Sending
button.c
Sending
Makefile
Transmitting file data ...
Committed revision 481.
Now the trunk contains the complete second wave of changes made to the branch. At this point, you can
either delete your branch (we'll discuss this later on), or continue working on your branch and repeat this
procedure for subsequent merges.
Undoing Changes
Another common use for svn merge is to roll back a change that has already been committed. Suppose
you're working away happily on a working copy of /calc/trunk, and you discover that the change
made way back in revision 303, which changed integer.c, is completely wrong. It never should have
been committed. You can use svn merge to “undo” the change in your working copy, and then commit
the local modification to the repository. All you need to do is to specify a reverse difference:
$ svn merge -r 303:302 http://svn.example.com/repos/calc/trunk
U integer.c
$ svn status
M integer.c
$ svn diff
…
# verify that the change is removed
…
$ svn commit -m "Undoing change committed in r303."
Sending
integer.c
Transmitting file data .
Committed revision 350.
One way to think about a repository revision is as a specific group of changes (some version control systems call these changesets). By using the -r switch, you can ask svn merge to apply a changeset, or
whole range of changesets, to your working copy. In our case of undoing a change, we're asking svn
merge to apply changeset #303 to our working copy backwards.
Keep in mind that rolling back a change like this is just like any other svn merge operation, so you
should use svn status and svn diff to confirm that your work is in the state you want it to be in, and then
use svn commit to send the final version to the repository. After committing, this particular changeset is
59
Branching and Merging
no longer reflected in the HEAD revision.
Again, you may be thinking: well, that really didn't undo the commit, did it? The change still exists in
revision 303. If somebody checks out a version of the calc project between revisions 303 and 349,
they'll still see the bad change, right?
Yes, that's true. When we talk about “removing” a change, we're really talking about removing it from
HEAD. The original change still exists in the repository's history. For most situations, this is good
enough. Most people are only interested in tracking the HEAD of a project anyway. There are special
cases, however, where you really might want to destroy all evidence of the commit. (Perhaps somebody
accidentally committed a confidential document.) This isn't so easy, it turns out, because Subversion was
deliberately designed to never lose information. Revisions are immutable trees which build upon one another. Removing a revision from history would cause a domino effect, creating chaos in all subsequent
revisions and possibly invalidating all working copies. 3
Resurrecting Deleted Items
The great thing about version control systems is that information is never lost. Even when you delete a
file or directory, it may be gone from the HEAD revision, but the object still exists in earlier revisions.
One of the most common questions new users ask is, “How do I get my old file or directory back?”.
The first step is to define exactly which item you're trying to resurrect. Here's a useful metaphor: you
can think of every object in the repository as existing in a sort of two-dimensional coordinate system.
The first coordinate is a particular revision tree, and the second coordinate is a path within that tree. So
every version of your file or directory can be defined by a specific coordinate pair.
Subversion has no Attic directory like CVS does, 4 so you need to use svn log to discover the exact
coordinate pair you wish to resurrect. A good strategy is to run svn log --verbose in a directory which
used to contain your deleted item. The --verbose option shows a list of all changed items in each revision; all you need to do is find the revision in which you deleted the file or directory. You can do this
visually, or by using another tool to examine the log output (via grep, or perhaps via an incremental
search in an editor).
$ cd parent-dir
$ svn log --verbose
…
-----------------------------------------------------------------------r808 | joe | 2003-12-26 14:29:40 -0600 (Fri, 26 Dec 2003) | 3 lines
Changed paths:
D /calc/trunk/real.c
M /calc/trunk/integer.c
Added fast fourier transform functions to integer.c.
Removed real.c because code now in double.c.
…
In the example, we're assuming that you're looking for a deleted file real.c. By looking through the
logs of a parent directory, you've spotted that this file was deleted in revision 808. Therefore, the last
version of the file to exist was in the revision right before that. Conclusion: you want to resurrect the
path /calc/trunk/real.c from revision 807.
That was the hard part—the research. Now that you know what you want to restore, you have two different choices.
3
The Subversion project has plans, however, to someday implement an svnadmin obliterate command that would accomplish the
task of permanently deleting information. In the meantime, see the section called “svndumpfilter” for a possible workaround.
4
Because CVS doesn't version trees, it creates an Attic area within each repository directory as a way of remembering deleted
files.
60
Branching and Merging
One option is to use svn merge to apply revision 808 “in reverse”. (We've already discussed how to
undo changes, see the section called “Undoing Changes”.) This would have the effect of re-adding
real.c as a local modification. The file would be scheduled for addition, and after a commit, the file
would again exist in HEAD.
In this particular example, however, this is probably not the best strategy. Reverse-applying revision 808
would not only schedule real.c for addition, but the log message indicates that it would also undo
certain changes to integer.c, which you don't want. Certainly, you could reverse-merge revision 808
and then svn revert the local modifications to integer.c, but this technique doesn't scale well. What
if there were 90 files changed in revision 808?
A second, more targeted strategy is not to use svn merge at all, but rather the svn copy command.
Simply copy the exact revision and path “coordinate pair” from the repository to your working copy:
$ svn copy --revision 807 \
http://svn.example.com/repos/calc/trunk/real.c ./real.c
$ svn status
A +
real.c
$ svn commit -m "Resurrected real.c from revision 807, /calc/trunk/real.c."
Adding
real.c
Transmitting file data .
Committed revision 1390.
The plus sign in the status output indicates that the item isn't merely scheduled for addition, but scheduled for addition “with history”. Subversion remembers where it was copied from. In the future, running
svn log on this file will traverse back through the file's resurrection and through all the history it had prior to revision 807. In other words, this new real.c isn't really new; it's a direct descendant of the original, deleted file.
Although our example shows us resurrecting a file, note that these same techniques work just as well for
resurrecting deleted directories.
Common Branching Patterns
Version control is most often used for software development, so here's a quick peek at two of the most
common branching/merging patterns used by teams of programmers. If you're not using Subversion for
software development, feel free to skip this section. If you're a software developer using version control
for the first time, pay close attention, as these patterns are often considered best practices by experienced
folk. These processes aren't specific to Subversion; they're applicable to any version control system.
Still, it may help to see them described in Subversion terms.
Release Branches
Most software has a typical lifecycle: code, test, release, repeat. There are two problems with this process. First, developers need to keep writing new features while quality-assurance teams take time to test
supposedly-stable versions of the software. New work cannot halt while the software is tested. Second,
the team almost always needs to support older, released versions of software; if a bug is discovered in
the latest code, it most likely exists in released versions as well, and customers will want to get that bugfix without having to wait for a major new release.
Here's where version control can help. The typical procedure looks like this:
• Developers commit all new work to the trunk. Day-to-day changes are committed to /trunk: new
61
Branching and Merging
features, bugfixes, and so on.
• The trunk is copied to a “release” branch. When the team thinks the software is ready for release
(say, a 1.0 release), then /trunk might be copied to /branches/1.0.
• Teams continue to work in parallel. One team begins rigorous testing of the release branch, while another team continues new work (say, for version 2.0) on /trunk. If bugs are discovered in either location, fixes are ported back and forth as necessary. At some point, however, even that process stops.
The branch is “frozen” for final testing right before a release.
• The branch is tagged and released. When testing is complete, /branches/1.0 is copied to /
tags/1.0.0 as a reference snapshot. The tag is packaged and released to customers.
• The branch is maintained over time. While work continues on /trunk for version 2.0, bugfixes continue to be ported from /trunk to /branches/1.0. When enough bugfixes have accumulated,
management may decide to do a 1.0.1 release: /branches/1.0 is copied to /tags/1.0.1, and
the tag is packaged and released.
This entire process repeats as the software matures: when the 2.0 work is complete, a new 2.0 release
branch is created, tested, tagged, and eventually released. After some years, the repository ends up with
a number of release branches in “maintenance” mode, and a number of tags representing final shipped
versions.
Feature Branches
A feature branch is the sort of branch that's been the dominant example in this chapter, the one you've
been working on while Sally continues to work on /trunk. It's a temporary branch created to work on
a complex change without interfering with the stability of /trunk. Unlike release branches (which may
need to be supported forever), feature branches are born, used for a while, merged back to the trunk,
then ultimately deleted. They have a finite span of usefulness.
Again, project policies vary widely concerning exactly when it's appropriate to create a feature branch.
Some projects never use feature branches at all: commits to /trunk are a free-for-all. The advantage to
this system is that it's simple—nobody needs to learn about branching or merging. The disadvantage is
that the trunk code is often unstable or unusable. Other projects use branches to an extreme: no change is
ever committed to the trunk directly. Even the most trivial changes are created on a short-lived branch,
carefully reviewed and merged to the trunk. Then the branch is deleted. This system guarantees an exceptionally stable and usable trunk at all times, but at the cost of tremendous process overhead.
Most projects take a middle-of-the-road approach. They commonly insist that /trunk compile and
pass regression tests at all times. A feature branch is only required when a change requires a large number of destabilizing commits. A good rule of thumb is to ask this question: if the developer worked for
days in isolation and then committed the large change all at once (so that /trunk were never destabilized), would it be too large a change to review? If the answer to that question is “yes”, then the change
should be developed on a feature branch. As the developer commits incremental changes to the branch,
they can be easily reviewed by peers.
Finally, there's the issue of how to best keep a feature branch in “sync” with the trunk as work progresses. As we mentioned earlier, there's a great risk to working on a branch for weeks or months; trunk
changes may continue to pour in, to the point where the two lines of development differ so greatly that it
may become a nightmare trying to merge the branch back to the trunk.
This situation is best avoided by regularly merging trunk changes to the branch. Make up a policy: once
a week, merge the last week's worth of trunk changes to the branch. Take care when doing this; the merging needs to be hand-tracked to avoid the problem of repeated merges (as described in the section
called “Tracking Merges Manually”). You'll need to write careful log messages detailing exactly which
revision ranges have been merged already (as demonstrated in the section called “Merging a Whole
62
Branching and Merging
Branch to Another”). It may sound intimidating, but it's actually pretty easy to do.
At some point, you'll be ready to merge the “synchronized” feature branch back to the trunk. To do this,
begin by doing a final merge of the latest trunk changes to the branch. When that's done, the latest versions of branch and trunk will be absolutely identical except for your branch changes. So in this special
case, you would merge by comparing the branch with the trunk:
$ cd trunk-working-copy
$ svn update
At revision 1910.
$ svn merge http://svn.example.com/repos/calc/trunk@1910 \
http://svn.example.com/repos/calc/branches/mybranch@1910
U real.c
U integer.c
A newdirectory
A newdirectory/newfile
…
By comparing the HEAD revision of the trunk with the HEAD revision of the branch, you're defining a
delta that describes only the changes you made to the branch; both lines of development already have all
of the trunk changes.
Another way of thinking about this pattern is that your weekly sync of trunk to branch is analogous to
running svn update in a working copy, while the final merge step is analogous to running svn commit
from a working copy. After all, what else is a working copy but a very shallow private branch? It's a
branch that's only capable of storing one change at a time.
Switching a Working Copy
The svn switch command transforms an existing working copy into a different branch. While this command isn't strictly necessary for working with branches, it provides a nice shortcut to users. In our earlier
example, after creating your private branch, you checked out a fresh working copy of the new repository
directory. Instead, you can simply ask Subversion to change your working copy of /calc/trunk to
mirror the new branch location:
$ cd calc
$ svn info | grep URL
URL: http://svn.example.com/repos/calc/trunk
$ svn switch http://svn.example.com/repos/calc/branches/my-calc-branch
U
integer.c
U
button.c
U
Makefile
Updated to revision 341.
$ svn info | grep URL
URL: http://svn.example.com/repos/calc/branches/my-calc-branch
After “switching” to the branch, your working copy is no different than what you would get from doing
a fresh checkout of the directory. And it's usually more efficient to use this command, because often
branches only differ by a small degree. The server sends only the minimal set of changes necessary to
make your working copy reflect the branch directory.
The svn switch command also takes a --revision (-r) option, so you need not always move your
63
Branching and Merging
working copy to the “tip” of the branch.
Of course, most projects are more complicated than our calc example, containing multiple subdirectories. Subversion users often follow a specific algorithm when using branches:
1. Copy the project's entire “trunk” to a new branch directory.
2. Switch only part of the trunk working copy to mirror the branch.
In other words, if a user knows that the branch-work only needs to happen on a specific subdirectory,
they use svn switch to move only that subdirectory to the branch. (Or sometimes users will switch just a
single working file to the branch!) That way, they can continue to receive normal “trunk” updates to
most of their working copy, but the switched portions will remain immune (unless someone commits a
change to their branch). This feature adds a whole new dimension to the concept of a “mixed working
copy”—not only can working copies contain a mixture of working revisions, but a mixture of repository
locations as well.
If your working copy contains a number of switched subtrees from different repository locations, it continues to function as normal. When you update, you'll receive patches to each subtree as appropriate.
When you commit, your local changes will still be applied as a single, atomic change to the repository.
Note that while it's okay for your working copy to reflect a mixture of repository locations, these locations must all be within the same repository. Subversion repositories aren't yet able to communicate with
one another; that's a feature planned beyond Subversion 1.0.5
Switches and Updates
Have you noticed that the output of svn switch and svn update look the same? The switch
command is actually a superset of the update command.
When you run svn update, you're asking the repository to compare two trees. The repository does
so, and then sends a description of the differences back to the client. The only difference between
svn switch and svn update is that the update command always compares two identical paths.
That is, if your working copy is a mirror of /calc/trunk, then svn update will automatically
compare your working copy of /calc/trunk to /calc/trunk in the HEAD revision. If
you're switching your working copy to a branch, then svn switch will compare your working copy
of /calc/trunk to some other branch-directory in the HEAD revision.
In other words, an update moves your working copy through time. A switch moves your working
copy through time and space.
Because svn switch is essentially a variant of svn update, it shares the same behaviors; any local modifications in your working copy are preserved when new data arrives from the repository. This allows
you to perform all sorts of clever tricks.
For example, suppose you have a working copy of /calc/trunk and make a number of changes to it.
Then you suddenly realize that you meant to make the changes to a branch instead. No problem! When
you svn switch your working copy to the branch, the local changes will remain. You can then test and
commit them to the branch.
5
You can, however, use svn switch with the --relocate switch if the URL of your server changes and you don't want to abandon an existing working copy. See the svn switch section in Chapter 9, Subversion Complete Reference for more information and
an example.
64
Branching and Merging
Tags
Another common version control concept is a tag. A tag is just a “snapshot” of a project in time. In Subversion, this idea already seems to be everywhere. Each repository revision is exactly that—a snapshot
of the filesystem after each commit.
However, people often want to give more human-friendly names to tags, like release-1.0. And they
want to make snapshots of smaller subdirectories of the filesystem. After all, it's not so easy to remember that release-1.0 of a piece of software is a particular subdirectory of revision 4822.
Creating a Simple Tag
Once again, svn copy comes to the rescue. If you want to create a snapshot of /calc/trunk exactly
as it looks in the HEAD revision, then make a copy of it:
$ svn copy http://svn.example.com/repos/calc/trunk \
http://svn.example.com/repos/calc/tags/release-1.0 \
-m "Tagging the 1.0 release of the 'calc' project."
Committed revision 351.
This example assumes that a /calc/tags directory already exists. (If it doesn't, see svn mkdir). After
the copy completes, the new release-1.0 directory is forever a snapshot of how the project looked
in the HEAD revision at the time you made the copy. Of course you might want to be more precise about
exactly which revision you copy, in case somebody else may have committed changes to the project
when you weren't looking. So if you know that revision 350 of /calc/trunk is exactly the snapshot
you want, you can specify it by passing -r 350 to the svn copy command.
But wait a moment: isn't this tag-creation procedure the same procedure we used to create a branch?
Yes, in fact, it is. In Subversion, there's no difference between a tag and a branch. Both are just ordinary
directories that are created by copying. Just as with branches, the only reason a copied directory is a
“tag” is because humans have decided to treat it that way: as long as nobody ever commits to the directory, it forever remains a snapshot. If people start committing to it, it becomes a branch.
If you are administering a repository, there are two approaches you can take to managing tags. The first
approach is “hands off”: as a matter of project policy, decide where your tags will live, and make sure
all users know how to treat the directories they copy in there. (That is, make sure they know not to commit to them.) The second approach is more paranoid: you can use one of the access-control scripts
provided with Subversion to prevent anyone from doing anything but creating new copies in the tagsarea (See Chapter 6, Server Configuration.) The paranoid approach, however, isn't usually necessary. If
a user accidentally commits a change to a tag-directory, you can simply undo the change as discussed in
the previous section. This is version control, after all.
Creating a Complex Tag
Sometimes you may want your “snapshot” to be more complicated than a single directory at a single revision.
For example, pretend your project is much larger than our calc example: suppose it contains a number
of subdirectories and many more files. In the course of your work, you may decide that you need to create a working copy that is designed to have specific features and bug fixes. You can accomplish this by
selectively backdating files or directories to particular revisions (using svn update -r liberally), or by
switching files and directories to particular branches (making use of svn switch). When you're done,
your working copy is a hodgepodge of repository locations from different revisions. But after testing,
you know it's the precise combination of data you need.
65
Branching and Merging
Time to make a snapshot. Copying one URL to another won't work here. In this case, you want to make
a snapshot of your exact working copy arrangement and store it in the repository. Luckily, svn copy actually has four different uses (which you can read about in Chapter 9, Subversion Complete Reference),
including the ability to copy a working-copy tree to the repository:
$ ls
my-working-copy/
$ svn copy my-working-copy http://svn.example.com/repos/calc/tags/mytag
Committed revision 352.
Now there is a new directory in the repository, /calc/tags/mytag, which is an exact snapshot of
your working copy—mixed revisions, URLs, and all.
Other users have found interesting uses for this feature. Sometimes there are situations where you have a
bunch of local changes made to your working copy, and you'd like a collaborator to see them. Instead of
running svn diff and sending a patch file (which won't capture tree changes, symlink changes or changes
in properties), you can instead use svn copy to “upload” your working copy to a private area of the repository. Your collaborator can then either checkout a verbatim copy of your working copy, or use svn
merge to receive your exact changes.
Branch Maintenance
You may have noticed by now that Subversion is extremely flexible. Because it implements branches
and tags with the same underlying mechanism (directory copies), and because branches and tags appear
in normal filesystem space, many people find Subversion intimidating. It's almost too flexible. In this
section, we'll offer some suggestions for arranging and managing your data over time.
Repository Layout
There are some standard, recommended ways to organize a repository. Most people create a trunk directory to hold the “main line” of development, a branches directory to contain branch copies, and a
tags directory to contain tag copies. If a repository holds only one project, then often people create
these top-level directories:
/trunk
/branches
/tags
If a repository contains multiple projects, admins typically index their layout by project (see the section
called “Choosing a Repository Layout” to read more about “project roots”):
/paint/trunk
/paint/branches
/paint/tags
/calc/trunk
/calc/branches
/calc/tags
Of course, you're free to ignore these common layouts. You can create any sort of variation, whatever
works best for you or your team. Remember that whatever you choose, it's not a permanent commitment. You can reorganize your repository at any time. Because branches and tags are ordinary director66
Branching and Merging
ies, the svn move command can move or rename them however you wish. Switching from one layout to
another is just a matter of issuing a series of server-side moves; if you don't like the way things are organized in the repository, just juggle the directories around.
Remember, though, that while moving directories may be easy to do, you need to be considerate of your
users as well. Your juggling can be disorienting to users with existing working copies. If a user has a
working copy of a particular repository directory, your svn move operation might remove the path from
the latest revision. When the user next runs svn update, she will be told that her working copy represents a path that no longer exists, and the user will be forced to svn switch to the new location.
Data Lifetimes
Another nice feature of Subversion's model is that branches and tags can have finite lifetimes, just like
any other versioned item. For example, suppose you eventually finish all your work on your personal
branch of the calc project. After merging all of your changes back into /calc/trunk, there's no
need for your private branch directory to stick around anymore:
$ svn delete http://svn.example.com/repos/calc/branches/my-calc-branch \
-m "Removing obsolete branch of calc project."
Committed revision 375.
And now your branch is gone. Of course it's not really gone: the directory is simply missing from the
HEAD revision, no longer distracting anyone. If you use svn checkout, svn switch, or svn list to examine an earlier revision, you'll still be able to see your old branch.
If browsing your deleted directory isn't enough, you can always bring it back. Resurrecting data is very
easy in Subversion. If there's a deleted directory (or file) that you'd like to bring back into HEAD, simply
use svn copy -r to copy it from the old revision:
$ svn copy -r 374 http://svn.example.com/repos/calc/branches/my-calc-branch \
http://svn.example.com/repos/calc/branches/my-calc-branch
Committed revision 376.
In our example, your personal branch had a relatively short lifetime: you may have created it to fix a bug
or implement a new feature. When your task is done, so is the branch. In software development, though,
it's also common to have two “main” branches running side-by-side for very long periods. For example,
suppose it's time to release a stable version of the calc project to the public, and you know it's going to
take a couple of months to shake bugs out of the software. You don't want people to add new features to
the project, but you don't want to tell all developers to stop programming either. So instead, you create a
“stable” branch of the software that won't change much:
$ svn copy http://svn.example.com/repos/calc/trunk \
http://svn.example.com/repos/calc/branches/stable-1.0 \
-m "Creating stable branch of calc project."
Committed revision 377.
And now developers are free to continue adding cutting-edge (or experimental) features to /
calc/trunk, and you can declare a project policy that only bug fixes are to be committed to /
calc/branches/stable-1.0. That is, as people continue to work on the trunk, a human selectively ports bug fixes over to the stable branch. Even after the stable branch has shipped, you'll probably
67
Branching and Merging
continue to maintain the branch for a long time—that is, as long as you continue to support that release
for customers.
Summary
We've covered a lot of ground in this chapter. We've discussed the concepts of tags and branches, and
demonstrated how Subversion implements these concepts by copying directories with the svn copy
command. We've shown how to use svn merge to copy changes from one branch to another, or roll back
bad changes. We've gone over the use of svn switch to create mixed-location working copies. And
we've talked about how one might manage the organization and lifetimes of branches in a repository.
Remember the Subversion mantra: branches and tags are cheap. So use them liberally!
68
Chapter 5. Repository Administration
The Subversion repository is the central storehouse of versioned data for any number of projects. As
such, it becomes an obvious candidate for all the love and attention an administrator can offer. While the
repository is generally a low-maintenance item, it is important to understand how to properly configure
and care for it so that potential problems are avoided, and actual problems are safely resolved.
In this chapter, we'll discuss how to create and configure a Subversion repository. We'll also talk about
repository maintenance, including the use of the svnlook and svnadmin tools (which are provided with
Subversion). We'll address some common questions and mistakes, and give some suggestions on how to
arrange the data in the repository.
If you plan to access a Subversion repository only in the role of a user whose data is under version control (that is, via a Subversion client), you can skip this chapter altogether. However, if you are, or wish
to become, a Subversion repository administrator, 1 you should definitely pay attention to this chapter.
Repository Basics
Before jumping into the broader topic of repository administration, let's further define what a repository
is. How does it look? How does it feel? Does it take its tea hot or iced, sweetened, and with lemon? As
an administrator, you'll be expected to understand the composition of a repository both from a logical
perspective—dealing with how data is represented inside the repository—and from a physical nutsand-bolts perspective—how a repository looks and acts with respect to non-Subversion tools. The following section covers some of these basic concepts at a very high level.
Understanding Transactions and Revisions
Conceptually speaking, a Subversion repository is a sequence of directory trees. Each tree is a snapshot
of how the files and directories versioned in your repository looked at some point in time. These snapshots are created as a result of client operations, and are called revisions.
Every revision begins life as a transaction tree. When doing a commit, a client builds a Subversion transaction that mirrors their local changes (plus any additional changes that might have been made to the repository since the beginning of the client's commit process), and then instructs the repository to store
that tree as the next snapshot in the sequence. If the commit succeeds, the transaction is effectively promoted into a new revision tree, and is assigned a new revision number. If the commit fails for some reason, the transaction is destroyed and the client is informed of the failure.
Updates work in a similar way. The client builds a temporary transaction tree that mirrors the state of the
working copy. The repository then compares that transaction tree with the revision tree at the requested
revision (usually the most recent, or “youngest” tree), and sends back information that informs the client
about what changes are needed to transform their working copy into a replica of that revision tree. After
the update completes, the temporary transaction is deleted.
The use of transaction trees is the only way to make permanent changes to a repository's versioned
filesystem. However, it's important to understand that the lifetime of a transaction is completely flexible.
In the case of updates, transactions are temporary trees that are immediately destroyed. In the case of
commits, transactions are transformed into permanent revisions (or removed if the commit fails). In the
case of an error or bug, it's possible that a transaction can be accidentally left lying around in the repository (not really affecting anything, but still taking up space).
1
This may sound really prestigious and lofty, but we're just talking about anyone who is interested in that mysterious realm beyond
the working copy where everyone's data hangs out.
69
Repository Administration
In theory, someday whole workflow applications might revolve around more fine-grained control of
transaction lifetime. It is feasible to imagine a system whereby each transaction slated to become a revision is left in stasis well after the client finishes describing its changes to repository. This would enable
each new commit to be reviewed by someone else, perhaps a manager or engineering QA team, who can
choose to promote the transaction into a revision, or abort it.
Unversioned Properties
Transactions and revisions in the Subversion repository can have properties attached to them. These
properties are generic key-to-value mappings, and are generally used to store information about the tree
to which they are attached. The names and values of these properties are stored in the repository's
filesystem, along with the rest of your tree data.
Revision and transaction properties are useful for associating information with a tree that is not strictly
related to the files and directories in that tree—the kind of information that isn't managed by client
working copies. For example, when a new commit transaction is created in the repository, Subversion
adds a property to that transaction named svn:date—a datestamp representing the time that the transaction was created. By the time the commit process is finished, and the transaction is promoted to a permanent revision, the tree has also been given a property to store the username of the revision's author
(svn:author) and a property to store the log message attached to that revision (svn:log).
Revision and transaction properties are unversioned properties—as they are modified, their previous
values are permanently discarded. Also, while revision trees themselves are immutable, the properties
attached to those trees are not. You can add, remove, and modify revision properties at any time in the
future. If you commit a new revision and later realize that you had some misinformation or spelling error
in your log message, you can simply replace the value of the svn:log property with a new, corrected
log message.
Repository Data Stores
As of Subversion 1.1, there are two options for storing data in a Subversion repository. One type of repository stores everything in a Berkeley DB database; the other kind stores data in ordinary flat files, using a custom format. Because Subversion developers often refer to a repository as “the (versioned)
filesystem”, they have adopted the habit of referring to the latter type of repository as FSFS 2 —a versioned filesystem implementation that uses the native OS filesystem to store data.
When a repository is created, an administrator must decide whether it will use Berkeley DB or FSFS.
There are advantages and disadvantages to each, which we'll describe in a bit. Neither back-end is more
“official” than another, and programs which access the repository are insulated from this implementation
detail. Programs have no idea how a repository is storing data; they only see revision and transaction
trees through the repository API.
Table 5.1, “Repository Data Store Comparison” gives a comparative overview of Berkeley DB and
FSFS repositories. The next sections go into detail.
Table 5.1. Repository Data Store Comparison
Feature
Berkeley DB
FSFS
Sensitivity to interruptions
very; crashes and permission quite insensitive.
problems can leave the database
“wedged”, requiring journaled recovery procedures.
Usable from a read-only mount
no
yes
2
Pronounced “fuzz-fuzz”, if Jack Repenning has anything to say about it.
70
Repository Administration
Feature
Berkeley DB
FSFS
Platform-independent storage
no
yes
Usable over network filesystems no
yes
Repository size
slightly smaller
slightly larger
Scalability: number of revision database; no problems
trees
some older native filesystems
don't scale well with thousands of
entries in a single directory.
Scalability: directories with many slower
files
faster
Speed: checking out latest code
faster
slower
Speed: large commits
slower, but work
throughout commit
Group permissions handling
sensitive to user umask problems; works around umask problems
best if accessed by only one user.
Code maturity
in use since 2001
is
spread faster, but finalization delay may
cause client timeouts
in use since 2004
Berkeley DB
When the initial design phase of Subversion was in progress, the developers decided to use Berkeley DB
for a variety of reasons, including its open-source license, transaction support, reliability, performance,
API simplicity, thread-safety, support for cursors, and so on.
Berkeley DB provides real transaction support—perhaps its most powerful feature. Multiple processes
accessing your Subversion repositories don't have to worry about accidentally clobbering each other's
data. The isolation provided by the transaction system is such that for any given operation, the Subversion repository code sees a static view of the database—not a database that is constantly changing at the
hand of some other process—and can make decisions based on that view. If the decision made happens
to conflict with what another process is doing, the entire operation is rolled back as if it never happened,
and Subversion gracefully retries the operation against a new, updated (and yet still static) view of the
database.
Another great feature of Berkeley DB is hot backups—the ability to backup the database environment
without taking it “offline”. We'll discuss how to backup your repository in the section called
“Repository Backup”, but the benefits of being able to make fully functional copies of your repositories
without any downtime should be obvious.
Berkeley DB is also a very reliable database system. Subversion uses Berkeley DB's logging facilities,
which means that the database first writes to on-disk log files a description of any modifications it is
about to make, and then makes the modification itself. This is to ensure that if anything goes wrong, the
database system can back up to a previous checkpoint—a location in the log files known not to be corrupt—and replay transactions until the data is restored to a usable state. See the section called
“Managing Disk Space” for more about Berkeley DB log files.
But every rose has its thorn, and so we must note some known limitations of Berkeley DB. First, Berkeley DB environments are not portable. You cannot simply copy a Subversion repository that was created
on a Unix system onto a Windows system and expect it to work. While much of the Berkeley DB database format is architecture independent, there are other aspects of the environment that are not.
Secondly, Subversion uses Berkeley DB in a way that will not operate on Windows 95/98 systems—if
you need to house a repository on a Windows machine, stick with Windows 2000 or Windows XP. Also,
you should never keep a Berkeley DB repository on a network share. While Berkeley DB promises to
behave correctly on network shares that meet a particular set of specifications, almost no known shares
actually meet all those specifications.
Finally, because Berkeley DB is a library linked directly into Subversion, it's more sensitive to interrup71
Repository Administration
tions than a typical relational database system. Most SQL systems, for example, have a dedicated server
process that mediates all access to tables. If a program accessing the database crashes for some reason,
the database daemon notices the lost connection and cleans up any mess left behind. And because the
database daemon is the only process accessing the tables, applications don't need to worry about permission conflicts. These things are not the case with Berkeley DB, however. Subversion (and programs using Subversion libraries) access the database tables directly, which means that a program crash can leave
the database in a temporarily inconsistent, inaccessible state. When this happens, an administrator needs
to ask Berkeley DB to restore to a checkpoint, which is a bit of an annoyance. Other things can cause a
repository to “wedge” besides crashed processes, such as programs conflicting over ownership and permissions on the database files. So while a Berkeley DB repository is quite fast and scalable, it's best
used by a single server process running as one user—such as Apache's httpd or svnserve (see
Chapter 6, Server Configuration)—rather than accessing it as many different users via file:/// or
svn+ssh:// URLs. If using a Berkeley DB repository directly as multiple users, be sure to read the
section called “Supporting Multiple Repository Access Methods”.
FSFS
In mid-2004, a second type of repository storage system came into being: one which doesn't use a database at all. An FSFS repository stores a revision tree in a single file, and so all of a repository's revisions
can be found in a single subdirectory full of numbered files. Transactions are created in separate subdirectories. When complete, a single transaction file is created and moved to the revisions directory, thus
guaranteeing that commits are atomic. And because a revision file is permanent and unchanging, the repository also can be backed up while “hot”, just like a Berkeley DB repository.
The revision-file format represents a revision's directory structure, file contents, and deltas against files
in other revision trees. Unlike a Berkeley DB database, this storage format is portable across different
operating systems and isn't sensitive to CPU architecture. Because there's no journaling or sharedmemory files being used, the repository can be safely accessed over a network filesystem and examined
in a read-only environment. The lack of database overhead also means that the overall repository size is
a bit smaller.
FSFS has different performance characteristics too. When committing a directory with a huge number of
files, FSFS uses an O(N) algorithm to append entries, while Berkeley DB uses an O(N^2) algorithm to
rewrite the whole directory. On the other hand, FSFS writes the latest version of a file as a delta against
an earlier version, which means that checking out the latest tree is a bit slower than fetching the fulltexts
stored in a Berkeley DB HEAD revision. FSFS also has a longer delay when finalizing a commit, which
could in extreme cases cause clients to time out when waiting for a response.
The most important distinction, however, is FSFS's inability to be “wedged” when something goes
wrong. If a process using a Berkeley DB database runs into a permissions problem or suddenly crashes,
the database is left unusable until an administrator recovers it. If the same scenarios happen to a process
using an FSFS repository, the repository isn't affected at all. At worst, some transaction data is left behind.
The only real argument against FSFS is its relative immaturity compared to Berkeley DB. It hasn't been
used or stress-tested nearly as much, and so a lot of these assertions about speed and scalability are just
that: assertions, based on good guesses. In theory, it promises a lower barrier to entry for new administrators and is less susceptible to problems. In practice, only time will tell.
Repository Creation and Configuration
Creating a Subversion repository is an incredibly simple task. The svnadmin utility, provided with Subversion, has a subcommand for doing just that. To create a new repository, just run:
$ svnadmin create /path/to/repos
72
Repository Administration
This creates a new repository in the directory /path/to/repos. This new repository begins life at
revision 0, which is defined to consist of nothing but the top-level root (/) filesystem directory. Initially,
revision 0 also has a single revision property, svn:date, set to the time at which the repository was
created.
In Subversion 1.2, a repository is created with an FSFS back-end by default (see the section called
“Repository Data Stores”). The back-end can be explicitly chosen with the --fs-type argument:
$ svnadmin create --fs-type fsfs /path/to/repos
$ svnadmin create --fs-type bdb /path/to/other/repos
Warning
Do not create a Berkeley DB repository on a network share—it cannot exist on a remote
filesystem such as NFS, AFS, or Windows SMB. Berkeley DB requires that the underlying
filesystem implement strict POSIX locking semantics, and more importantly, the ability to
map files directly into process memory. Almost no network filesystems provide these features. If you attempt to use Berkeley DB on a network share, the results are unpredictable—you may see mysterious errors right away, or it may be months before you discover
that your repository database is subtly corrupted.
If you need multiple computers to access the repository, you create an FSFS repository on
the network share, not a Berkeley DB repository. Or better yet, set up a real server process
(such as Apache or svnserve), store the repository on a local filesystem which the server
can access, and make the repository available over a network. Chapter 6, Server Configuration covers this process in detail.
You may have noticed that the path argument to svnadmin was just a regular filesystem path and not a
URL like the svn client program uses when referring to repositories. Both svnadmin and svnlook are
considered server-side utilities—they are used on the machine where the repository resides to examine
or modify aspects of the repository, and are in fact unable to perform tasks across a network. A common
mistake made by Subversion newcomers is trying to pass URLs (even “local” file: ones) to these two
programs.
So, after you've run the svnadmin create command, you have a shiny new Subversion repository in its
own directory. Let's take a peek at what is actually created inside that subdirectory.
$ ls repos
conf/ dav/
db/
format
hooks/
locks/
README.txt
With the exception of the README.txt and format files, the repository directory is a collection of
subdirectories. As in other areas of the Subversion design, modularity is given high regard, and hierarchical organization is preferred to cluttered chaos. Here is a brief description of all of the items you see in
your new repository directory:
conf
A directory containing repository configuration files.
dav
A directory provided to Apache and mod_dav_svn for their private housekeeping data.
db
Where all of your versioned data resides. This directory is either a Berkeley DB environment (full
73
Repository Administration
of DB tables and other things), or is an FSFS environment containing revision files.
format
A file whose contents are a single integer value that dictates the version number of the repository
layout.
hooks
A directory full of hook script templates (and hook scripts themselves, once you've installed some).
locks
A directory for Subversion's repository locking data, used for tracking accessors to the repository.
README.txt
A file which merely informs its readers that they are looking at a Subversion repository.
In general, you shouldn't tamper with your repository “by hand”. The svnadmin tool should be sufficient for any changes necessary to your repository, or you can look to third-party tools (such as Berkeley
DB's tool suite) for tweaking relevant subsections of the repository. Some exceptions exist, though, and
we'll cover those here.
Hook Scripts
A hook is a program triggered by some repository event, such as the creation of a new revision or the
modification of an unversioned property. Each hook is handed enough information to tell what that
event is, what target(s) it's operating on, and the username of the person who triggered the event. Depending on the hook's output or return status, the hook program may continue the action, stop it, or suspend it in some way.
The hooks subdirectory is, by default, filled with templates for various repository hooks.
$ ls repos/hooks/
post-commit.tmpl
post-lock.tmpl
post-revprop-change.tmpl
post-unlock.tmpl
pre-commit.tmpl
pre-lock.tmpl
pre-revprop-change.tmpl
pre-unlock.tmpl
start-commit.tmpl
There is one template for each hook that the Subversion repository implements, and by examining the
contents of those template scripts, you can see what triggers each such script to run and what data is
passed to that script. Also present in many of these templates are examples of how one might use that
script, in conjunction with other Subversion-supplied programs, to perform common useful tasks. To actually install a working hook, you need only place some executable program or script into the repos/
hooks directory which can be executed as the name (like start-commit or post-commit) of the hook.
On Unix platforms, this means supplying a script or program (which could be a shell script, a Python
program, a compiled C binary, or any number of other things) named exactly like the name of the hook.
Of course, the template files are present for more than just informational purposes—the easiest way to
install a hook on Unix platforms is to simply copy the appropriate template file to a new file that lacks
the .tmpl extension, customize the hook's contents, and ensure that the script is executable. Windows,
however, uses file extensions to determine whether or not a program is executable, so you would need to
supply a program whose basename is the name of the hook, and whose extension is one of the special
extensions recognized by Windows for executable programs, such as .exe or .com for programs, and
.bat for batch files.
Tip
For security reasons, the Subversion repository executes hook scripts with an empty environment—that is, no environment variables are set at all, not even $PATH or %PATH%. Be74
Repository Administration
cause of this, a lot of administrators are baffled when their hook script runs fine by hand,
but doesn't work when run by Subversion. Be sure to explicitly set environment variables
in your hook and/or use absolute paths to programs.
There are nine hooks implemented by the Subversion repository:
start-commit
This is run before the commit transaction is even created. It is typically used to decide if the user
has commit privileges at all. The repository passes two arguments to this program: the path to the
repository, and username which is attempting the commit. If the program returns a non-zero exit
value, the commit is stopped before the transaction is even created. If the hook program writes data
to stderr, it will be marshalled back to the client.
pre-commit
This is run when the transaction is complete, but before it is committed. Typically, this hook is used
to protect against commits that are disallowed due to content or location (for example, your site
might require that all commits to a certain branch include a ticket number from the bug tracker, or
that the incoming log message is non-empty). The repository passes two arguments to this program:
the path to the repository, and the name of the transaction being committed. If the program returns a
non-zero exit value, the commit is aborted and the transaction is removed. If the hook program
writes data to stderr, it will be marshalled back to the client.
The Subversion distribution includes some access control scripts (located in the tools/
hook-scripts directory of the Subversion source tree) that can be called from pre-commit to
implement fine-grained write-access control. Another option is to use the mod_authz_svn Apache
httpd module, which provides both read and write access control on individual directories (see the
section called “Per-Directory Access Control”). In a future version of Subversion, we plan to implement access control lists (ACLs) directly in the filesystem.
post-commit
This is run after the transaction is committed, and a new revision is created. Most people use this
hook to send out descriptive emails about the commit or to make a backup of the repository. The repository passes two arguments to this program: the path to the repository, and the new revision
number that was created. The exit code of the program is ignored.
The Subversion distribution includes mailer.py and commit-email.pl scripts (located in the
tools/hook-scripts/ directory of the Subversion source tree) that can be used to send email
with (and/or append to a log file) a description of a given commit. This mail contains a list of the
paths that were changed, the log message attached to the commit, the author and date of the commit,
as well as a GNU diff-style display of the changes made to the various versioned files as part of the
commit.
Another useful tool provided by Subversion is the hot-backup.py script (located in the tools/
backup/ directory of the Subversion source tree). This script performs hot backups of your Subversion repository (a feature supported by the Berkeley DB database back-end), and can be used to
make a per-commit snapshot of your repository for archival or emergency recovery purposes.
pre-revprop-change
Because Subversion's revision properties are not versioned, making modifications to such a property (for example, the svn:log commit message property) will overwrite the previous value of
that property forever. Since data can be potentially lost here, Subversion supplies this hook (and its
counterpart, post-revprop-change) so that repository administrators can keep records of
changes to these items using some external means if they so desire. As a precaution against losing
unversioned property data, Subversion clients will not be allowed to remotely modify revision properties at all unless this hook is implemented for your repository.
75
Repository Administration
This hook runs just before such a modification is made to the repository. The repository passes four
arguments to this hook: the path to the repository, the revision on which the to-be-modified property
exists, the authenticated username of the person making the change, and the name of the property itself.
post-revprop-change
As mentioned earlier, this hook is the counterpart of the pre-revprop-change hook. In fact,
for the sake of paranoia this script will not run unless the pre-revprop-change hook exists.
When both of these hooks are present, the post-revprop-change hook runs just after a revision property has been changed, and is typically used to send an email containing the new value of
the changed property. The repository passes four arguments to this hook: the path to the repository,
the revision on which the property exists, the authenticated username of the person making the
change, and the name of the property itself.
The Subversion distribution includes a propchange-email.pl script (located in the tools/
hook-scripts/ directory of the Subversion source tree) that can be used to send email with
(and/or append to a log file) the details of a revision property change. This mail contains the revision and name of the changed property, the user who made the change, and the new property value.
pre-lock
This hook runs whenever someone attempts to lock a file. It can be used to prevent locks altogether,
or to create a more complex policy specifying exactly which users are allowed to lock particular
paths. If the hook notices a pre-existing lock, then it can also decide whether a user is allowed to
“steal” the existing lock. The repository passes three arguments to the hook: the path to the repository, the path being locked, and the user attempting to perform the lock. If the program returns a
non-zero exit value, the lock action is aborted and anything printed to stderr is marshalled back to
the client.
post-lock
This hook runs after a path is locked. The locked path is passed to the hook's stdin, and the hook
also receives two arguments: the path to the repository, and the user who performed the lock. The
hook is then free to send email notification or record the event in any way it chooses. Because the
lock already happened, the output of the hook is ignored.
pre-unlock
This hook runs whenever someone attempts to remove a lock on a file. It can be used to create
policies that specify which users are allowed to unlock particular paths. It's particularly important
for determining policies about lock breakage. If user A locks a file, is user B allowed to break the
lock? What if the lock is more than a week old? These sorts of things can be decided and enforced
by the hook. The repository passes three arguments to the hook: the path to the repository, the path
being unlocked, and the user attempting to remove the lock. If the program returns a non-zero exit
value, the unlock action is aborted and anything printed to stderr is marshalled back to the client.
post-unlock
This hook runs after a path is unlocked. The unlocked path is passed to the hook's stdin, and the
hook also receives two arguments: the path to the repository, and the user who removed the lock.
The hook is then free to send email notification or record the event in any way it chooses. Because
the lock removal already happened, the output of the hook is ignored.
Warning
Do not attempt to modify the transaction using hook scripts. A common example of this
would be to automatically set properties such as svn:eol-style or svn:mime-type
during the commit. While this might seem like a good idea, it causes problems. The main
problem is that the client does not know about the change made by the hook script, and
there is no way to inform the client that it is out-of-date. This inconsistency can lead to surprising and unexpected behavior.
76
Repository Administration
Instead of attempting to modify the transaction, it is much better to check the transaction in
the pre-commit hook and reject the commit if it does not meet the desired requirements.
Subversion will attempt to execute hooks as the same user who owns the process which is accessing the
Subversion repository. In most cases, the repository is being accessed via Apache HTTP server and
mod_dav_svn, so this user is the same user that Apache runs as. The hooks themselves will need to be
configured with OS-level permissions that allow that user to execute them. Also, this means that any file
or programs (including the Subversion repository itself) accessed directly or indirectly by the hook will
be accessed as the same user. In other words, be alert to potential permission-related problems that could
prevent the hook from performing the tasks you've written it to perform.
Berkeley DB Configuration
A Berkeley DB environment is an encapsulation of one or more databases, log files, region files and
configuration files. The Berkeley DB environment has its own set of default configuration values for
things like the number of database locks allowed to be taken out at any given time, or the maximum size
of the journaling log files, etc. Subversion's filesystem code additionally chooses default values for some
of the Berkeley DB configuration options. However, sometimes your particular repository, with its
unique collection of data and access patterns, might require a different set of configuration option values.
The folks at Sleepycat (the producers of Berkeley DB) understand that different databases have different
requirements, and so they have provided a mechanism for overriding at runtime many of the configuration values for the Berkeley DB environment. Berkeley checks for the presence of a file named
DB_CONFIG in each environment directory, and parses the options found in that file for use with that
particular Berkeley environment.
The Berkeley configuration file for your repository is located in the db environment directory, at repos/db/DB_CONFIG. Subversion itself creates this file when it creates the rest of the repository. The
file initially contains some default options, as well as pointers to the Berkeley DB online documentation
so you can read about what those options do. Of course, you are free to add any of the supported Berkeley DB options to your DB_CONFIG file. Just be aware that while Subversion never attempts to read or
interpret the contents of the file, and makes no use of the option settings in it, you'll want to avoid any
configuration changes that may cause Berkeley DB to behave in a fashion that is unexpected by the rest
of the Subversion code. Also, changes made to DB_CONFIG won't take effect until you recover the
database environment (using svnadmin recover).
Repository Maintenance
Maintaining a Subversion repository can be a daunting task, mostly due to the complexities inherent in
systems which have a database backend. Doing the task well is all about knowing the tools—what they
are, when to use them, and how to use them. This section will introduce you to the repository administration tools provided by Subversion, and how to wield them to accomplish tasks such as repository migrations, upgrades, backups and cleanups.
An Administrator's Toolkit
Subversion provides a handful of utilities useful for creating, inspecting, modifying and repairing your
repository. Let's look more closely at each of those tools. Afterward, we'll briefly examine some of the
utilities included in the Berkeley DB distribution that provide functionality specific to your repository's
database backend not otherwise provided by Subversion's own tools.
svnlook
77
Repository Administration
svnlook is a tool provided by Subversion for examining the various revisions and transactions in a repository. No part of this program attempts to change the repository—it's a “read-only” tool. svnlook is
typically used by the repository hooks for reporting the changes that are about to be committed (in the
case of the pre-commit hook) or that were just committed (in the case of the post-commit hook) to the
repository. A repository administrator may use this tool for diagnostic purposes.
svnlook has a straightforward syntax:
$ svnlook help
general usage: svnlook SUBCOMMAND REPOS_PATH [ARGS & OPTIONS ...]
Note: any subcommand which takes the '--revision' and '--transaction'
options will, if invoked without one of those options, act on
the repository's youngest revision.
Type "svnlook help <subcommand>" for help on a specific subcommand.
…
Nearly every one of svnlook's subcommands can operate on either a revision or a transaction tree, printing information about the tree itself, or how it differs from the previous revision of the repository. You
use the --revision and --transaction options to specify which revision or transaction, respectively, to examine. Note that while revision numbers appear as natural numbers, transaction names are alphanumeric strings. Keep in mind that the filesystem only allows browsing of uncommitted transactions
(transactions that have not resulted in a new revision). Most repositories will have no such transactions,
because transactions are usually either committed (which disqualifies them from viewing) or aborted
and removed.
In the absence of both the --revision and --transaction options, svnlook will examine the
youngest (or “HEAD”) revision in the repository. So the following two commands do exactly the same
thing when 19 is the youngest revision in the repository located at /path/to/repos:
$ svnlook info /path/to/repos
$ svnlook info /path/to/repos --revision 19
The only exception to these rules about subcommands is the svnlook youngest subcommand, which
takes no options, and simply prints out the HEAD revision number.
$ svnlook youngest /path/to/repos
19
Output from svnlook is designed to be both human- and machine-parsable. Take as an example the output of the info subcommand:
$ svnlook info /path/to/repos
sally
2002-11-04 09:29:13 -0600 (Mon, 04 Nov 2002)
27
Added the usual
Greek tree.
The output of the info subcommand is defined as:
1. The author, followed by a newline.
78
Repository Administration
2. The date, followed by a newline.
3. The number of characters in the log message, followed by a newline.
4. The log message itself, followed by a newline.
This output is human-readable, meaning items like the datestamp are displayed using a textual representation instead of something more obscure (such as the number of nanoseconds since the Tasty Freeze guy
drove by). But this output is also machine-parsable—because the log message can contain multiple lines
and be unbounded in length, svnlook provides the length of that message before the message itself. This
allows scripts and other wrappers around this command to make intelligent decisions about the log message, such as how much memory to allocate for the message, or at least how many bytes to skip in the
event that this output is not the last bit of data in the stream.
Another common use of svnlook is to actually view the contents of a revision or transaction tree. The
svnlook tree command displays the directories and files in the requested tree. If you supply the -show-ids option, it will also show the filesystem node revision IDs for each of those paths (which is
generally of more use to developers than to users).
$ svnlook tree /path/to/repos --show-ids
/ <0.0.1>
A/ <2.0.1>
B/ <4.0.1>
lambda <5.0.1>
E/ <6.0.1>
alpha <7.0.1>
beta <8.0.1>
F/ <9.0.1>
mu <3.0.1>
C/ <a.0.1>
D/ <b.0.1>
gamma <c.0.1>
G/ <d.0.1>
pi <e.0.1>
rho <f.0.1>
tau <g.0.1>
H/ <h.0.1>
chi <i.0.1>
omega <k.0.1>
psi <j.0.1>
iota <1.0.1>
Once you've seen the layout of directories and files in your tree, you can use commands like svnlook
cat, svnlook propget, and svnlook proplist to dig into the details of those files and directories.
svnlook can perform a variety of other queries, displaying subsets of bits of information we've mentioned previously, reporting which paths were modified in a given revision or transaction, showing textual and property differences made to files and directories, and so on. The following is a brief description of the current list of subcommands accepted by svnlook, and the output of those subcommands:
author
Print the tree's author.
cat
Print the contents of a file in the tree.
changed
79
Repository Administration
List all files and directories that changed in the tree.
date
Print the tree's datestamp.
diff
Print unified diffs of changed files.
dirs-changed
List the directories in the tree that were themselves changed, or whose file children were changed.
history
Display interesting points in the history of a versioned path (places where modifications or copies
occurred).
info
Print the tree's author, datestamp, log message character count, and log message.
lock
If a path is locked, describe the lock attributes.
log
Print the tree's log message.
propget
Print the value of a property on a path in the tree.
proplist
Print the names and values of properties set on paths in the tree.
tree
Print the tree listing, optionally revealing the filesystem node revision IDs associated with each
path.
uuid
Print the repository's UUID— Universal Unique IDentifier.
youngest
Print the youngest revision number.
svnadmin
The svnadmin program is the repository administrator's best friend. Besides providing the ability to create Subversion repositories, this program allows you to perform several maintenance operations on those
repositories. The syntax of svnadmin is similar to that of svnlook:
$ svnadmin help
general usage: svnadmin SUBCOMMAND REPOS_PATH [ARGS & OPTIONS ...]
Type "svnadmin help <subcommand>" for help on a specific subcommand.
Available subcommands:
create
deltify
dump
help (?, h)
…
We've already mentioned svnadmin's create subcommand (see the section called “Repository Cre80
Repository Administration
ation and Configuration”). Most of the others we will cover in more detail later in this chapter. For now,
let's just take a quick glance at what each of the available subcommands offers.
create
Create a new Subversion repository.
deltify
Run over a specified revision range, performing predecessor deltification on the paths changed in
those revisions. If no revisions are specified, this command will simply deltify the HEAD revision.
dump
Dump the contents of the repository, bounded by a given set of revisions, using a portable dump
format.
hotcopy
Make a hot copy of a repository. You can run this command at any time and make a safe copy of
the repository, regardless if other processes are using the repository.
list-dblogs
(Berkeley DB repositories only.) List the paths of Berkeley DB log files associated with the repository. This list includes all log files—those still in use by Subversion, as well as those no longer in
use.
list-unused-dblogs
(Berkeley DB repositories only.) List the paths of Berkeley DB log files associated with, but no
longer used by, the repository. You may safely remove these log files from the repository layout,
possibly archiving them for use in the event that you ever need to perform a catastrophic recovery
of the repository.
load
Load a set of revisions into a repository from a stream of data that uses the same portable dump
format generated by the dump subcommand.
lslocks
List and describe any locks that exist in the repository.
lstxns
List the names of uncommitted Subversion transactions that currently exist in the repository.
recover
Perform recovery steps on a repository that is in need of such, generally after a fatal error has occurred that prevented a process from cleanly shutting down its communication with the repository.
rmlocks
Unconditionally remove locks from listed paths.
rmtxns
Cleanly remove Subversion transactions from the repository (conveniently fed by output from the
lstxns subcommand).
setlog
Replace the current value of the svn:log (commit log message) property on a given revision in
the repository with a new value.
verify
Verify the contents of the repository. This includes, among other things, checksum comparisons of
the versioned data stored in the repository.
81
Repository Administration
svndumpfilter
Since Subversion stores everything in an opaque database system, attempting manual tweaks is unwise,
if not quite difficult. And once data has been stored in your repository, Subversion generally doesn't
provide an easy way to remove that data. 3 But inevitably, there will be times when you would like to
manipulate the history of your repository. You might need to strip out all instances of a file that was accidentally added to the repository (and shouldn't be there for whatever reason). Or, perhaps you have
multiple projects sharing a single repository, and you decide to split them up into their own repositories.
To accomplish tasks like this, administrators need a more manageable and malleable representation of
the data in their repositories—the Subversion repository dump format.
The Subversion repository dump format is a human-readable representation of the changes that you've
made to your versioned data over time. You use the svnadmin dump command to generate the dump
data, and svnadmin load to populate a new repository with it (see the section called “Migrating a Repository”). The great thing about the human-readability aspect of the dump format is that, if you aren't
careless about it, you can manually inspect and modify it. Of course, the downside is that if you have
two years' worth of repository activity encapsulated in what is likely to be a very large dump file, it
could take you a long, long time to manually inspect and modify it.
While it won't be the most commonly used tool at the administrator's disposal, svndumpfilter provides
a very particular brand of useful functionality—the ability to quickly and easily modify that dump data
by acting as a path-based filter. Simply give it either a list of paths you wish to keep, or a list of paths
you wish to not keep, then pipe your repository dump data through this filter. The result will be a modified stream of dump data that contains only the versioned paths you (explicitly or implicitly) requested.
The syntax of svndumpfilter is as follows:
$ svndumpfilter help
general usage: svndumpfilter SUBCOMMAND [ARGS & OPTIONS ...]
Type "svndumpfilter help <subcommand>" for help on a specific subcommand.
Available subcommands:
exclude
include
help (?, h)
There are only two interesting subcommands. They allow you to make the choice between explicit or
implicit inclusion of paths in the stream:
exclude
Filter out a set of paths from the dump data stream.
include
Allow only the requested set of paths to pass through the dump data stream.
Let's look a realistic example of how you might use this program. We discuss elsewhere (see the section
called “Choosing a Repository Layout”) the process of deciding how to choose a layout for the data in
your repositories—using one repository per project or combining them, arranging stuff within your repository, and so on. But sometimes after new revisions start flying in, you rethink your layout and would
like to make some changes. A common change is the decision to move multiple projects which are sharing a single repository into separate repositories for each project.
Our imaginary repository contains three projects: calc, calendar, and spreadsheet. They have
3
That, by the way, is a feature, not a bug.
82
Repository Administration
been living side-by-side in a layout like this:
/
calc/
trunk/
branches/
tags/
calendar/
trunk/
branches/
tags/
spreadsheet/
trunk/
branches/
tags/
To get these three projects into their own repositories, we first dump the whole repository:
$
*
*
*
*
…
$
svnadmin dump /path/to/repos > repos-dumpfile
Dumped revision 0.
Dumped revision 1.
Dumped revision 2.
Dumped revision 3.
Next, run that dump file through the filter, each time including only one of our top-level directories, and
resulting in three new dump files:
$ cat repos-dumpfile | svndumpfilter include calc > calc-dumpfile
…
$ cat repos-dumpfile | svndumpfilter include calendar > cal-dumpfile
…
$ cat repos-dumpfile | svndumpfilter include spreadsheet > ss-dumpfile
…
$
At this point, you have to make a decision. Each of your dump files will create a valid repository, but
will preserve the paths exactly as they were in the original repository. This means that even though you
would have a repository solely for your calc project, that repository would still have a top-level directory named calc. If you want your trunk, tags, and branches directories to live in the root of
your repository, you might wish to edit your dump files, tweaking the Node-path and Nodecopyfrom-path headers to no longer have that first calc/ path component. Also, you'll want to remove the section of dump data that creates the calc directory. It will look something like:
Node-path: calc
Node-action: add
Node-kind: dir
Content-length: 0
Warning
If you do plan on manually editing the dump file to remove a top-level directory, make
sure that your editor is not set to automatically convert end-lines to the native format (e.g.
83
Repository Administration
\r\n to \n) as the content will then not agree with the metadata and this will render the
dump file useless.
All that remains now is to create your three new repositories, and load each dump file into the right repository:
$ svnadmin create calc; svnadmin load calc < calc-dumpfile
<<< Started new transaction, based on original revision 1
* adding path : Makefile ... done.
* adding path : button.c ... done.
…
$ svnadmin create calendar; svnadmin load calendar < cal-dumpfile
<<< Started new transaction, based on original revision 1
* adding path : Makefile ... done.
* adding path : cal.c ... done.
…
$ svnadmin create spreadsheet; svnadmin load spreadsheet < ss-dumpfile
<<< Started new transaction, based on original revision 1
* adding path : Makefile ... done.
* adding path : ss.c ... done.
…
$
Both of svndumpfilter's subcommands accept options for deciding how to deal with “empty” revisions.
If a given revision contained only changes to paths that were filtered out, that now-empty revision could
be considered uninteresting or even unwanted. So to give the user control over what to do with those revisions, svndumpfilter provides the following command-line options:
--drop-empty-revs
Do not generate empty revisions at all—just omit them.
--renumber-revs
If empty revisions are dropped (using the --drop-empty-revs option), change the revision
numbers of the remaining revisions so that there are no gaps in the numeric sequence.
--preserve-revprops
If empty revisions are not dropped, preserve the revision properties (log message, author, date, custom properties, etc.) for those empty revisions. Otherwise, empty revisions will only contain the original datestamp, and a generated log message that indicates that this revision was emptied by svndumpfilter.
While svndumpfilter can be very useful, and a huge timesaver, there are unfortunately a couple of
gotchas. First, this utility is overly sensitive to path semantics. Pay attention to whether paths in your
dump file are specified with or without leading slashes. You'll want to look at the Node-path and
Node-copyfrom-path headers.
…
Node-path: spreadsheet/Makefile
…
If the paths have leading slashes, you should include leading slashes in the paths you pass to svndumpfilter include and svndumpfilter exclude (and if they don't, you shouldn't). Further, if your dump file
has an inconsistent usage of leading slashes for some reason, 4 you should probably normalize those
84
Repository Administration
paths so they all have, or lack, leading slashes.
Also, copied paths can give you some trouble. Subversion supports copy operations in the repository,
where a new path is created by copying some already existing path. It is possible that at some point in
the lifetime of your repository, you might have copied a file or directory from some location that svndumpfilter is excluding, to a location that it is including. In order to make the dump data self-sufficient,
svndumpfilter needs to still show the addition of the new path—including the contents of any files created by the copy—and not represent that addition as a copy from a source that won't exist in your
filtered dump data stream. But because the Subversion repository dump format only shows what was
changed in each revision, the contents of the copy source might not be readily available. If you suspect
that you have any copies of this sort in your repository, you might want to rethink your set of included/
excluded paths.
Berkeley DB Utilities
If you're using a Berkeley DB repository, then all of your versioned filesystem's structure and data live
in a set of database tables within the db subdirectory of your repository. This subdirectory is a regular
Berkeley DB environment directory, and can therefore be used in conjunction with any of the Berkeley
database tools (you can see the documentation for these tools at Sleepycat's website, http://www.sleepycat.com/).
For day-to-day Subversion use, these tools are unnecessary. Most of the functionality typically needed
for Subversion repositories has been duplicated in the svnadmin tool. For example, svnadmin listunused-dblogs and svnadmin list-dblogs perform a subset of what is provided by the Berkeley
db_archive command, and svnadmin recover reflects the common use cases of the db_recover utility.
There are still a few Berkeley DB utilities that you might find useful. The db_dump and db_load programs write and read, respectively, a custom file format which describes the keys and values in a Berkeley DB database. Since Berkeley databases are not portable across machine architectures, this format is a
useful way to transfer those databases from machine to machine, irrespective of architecture or operating
system. Also, the db_stat utility can provide useful information about the status of your Berkeley DB
environment, including detailed statistics about the locking and storage subsystems.
Repository Cleanup
Your Subversion repository will generally require very little attention once it is configured to your liking. However, there are times when some manual assistance from an administrator might be in order.
The svnadmin utility provides some helpful functionality to assist you in performing such tasks as:
• modifying commit log messages,
• removing dead transactions,
• recovering “wedged” repositories, and
• migrating repository contents to a different repository.
Perhaps the most commonly used of svnadmin's subcommands is setlog. When a transaction is committed to the repository and promoted to a revision, the descriptive log message associated with that new
revision (and provided by the user) is stored as an unversioned property attached to the revision itself. In
other words, the repository remembers only the latest value of the property, and discards previous ones.
Sometimes a user will have an error in her log message (a misspelling or some misinformation, perhaps). If the repository is configured (using the pre-revprop-change and post-rev4
While svnadmin dump has a consistent leading slash policy—to not include them—other programs which generate dump data
might not be so consistent.
85
Repository Administration
prop-change hooks; see the section called “Hook Scripts”) to accept changes to this log message
after the commit is finished, then the user can “fix” her log message remotely using the svn program's
propset command (see Chapter 9, Subversion Complete Reference). However, because of the potential to lose information forever, Subversion repositories are not, by default, configured to allow changes
to unversioned properties—except by an administrator.
If a log message needs to be changed by an administrator, this can be done using svnadmin setlog. This
command changes the log message (the svn:log property) on a given revision of a repository, reading
the new value from a provided file.
$ echo "Here is the new, correct log message" > newlog.txt
$ svnadmin setlog myrepos newlog.txt -r 388
The svnadmin setlog command alone is still bound by the same protections against modifying unversioned properties as a remote client is—the pre- and post-revprop-change hooks are still
triggered, and therefore must be setup to accept changes of this nature. But an administrator can get
around these protections by passing the --bypass-hooks option to the svnadmin setlog command.
Warning
Remember, though, that by bypassing the hooks, you are likely avoiding such things as
email notifications of property changes, backup systems which track unversioned property
changes, and so on. In other words, be very careful about what you are changing, and how
you change it.
Another common use of svnadmin is to query the repository for outstanding—possibly
dead—Subversion transactions. In the event that a commit should fail, the transaction is usually cleaned
up. That is, the transaction itself is removed from the repository, and any data associated with (and only
with) that transaction is removed as well. Occasionally, though, a failure occurs in such a way that the
cleanup of the transaction never happens. This could happen for several reasons: perhaps the client operation was inelegantly terminated by the user, or a network failure might have occurred in the middle of
an operation, etc. Regardless of the reason, dead transactions can happen. They don't do any real harm,
other than consuming a small bit of disk space. A fastidious administrator may nonetheless want to remove them.
You can use svnadmin's lstxns command to list the names of the currently outstanding transactions.
$ svnadmin lstxns myrepos
19
3a1
a45
$
Each item in the resultant output can then be used with svnlook (and its --transaction option) to
determine who created the transaction, when it was created, what types of changes were made in the
transaction—in other words, whether or not the transaction is a safe candidate for removal! If so, the
transaction's name can be passed to svnadmin rmtxns, which will perform the cleanup of the transaction. In fact, the rmtxns subcommand can take its input directly from the output of lstxns!
$ svnadmin rmtxns myrepos `svnadmin lstxns myrepos`
$
If you use these two subcommands like this, you should consider making your repository temporarily inaccessible to clients. That way, no one can begin a legitimate transaction before you start your cleanup.
86
Repository Administration
The following is a little bit of shell-scripting that can quickly generate information about each outstanding transaction in your repository:
Example 5.1. txn-info.sh (Reporting Outstanding Transactions)
#!/bin/sh
### Generate informational output for all outstanding transactions in
### a Subversion repository.
REPOS="${1}"
if [ "x$REPOS" = x ] ; then
echo "usage: $0 REPOS_PATH"
exit
fi
for TXN in `svnadmin lstxns ${REPOS}`; do
echo "---[ Transaction ${TXN} ]-------------------------------------------"
svnlook info "${REPOS}" --transaction "${TXN}"
done
You can run the previous script using /path/to/txn-info.sh /path/to/repos. The output is basically a concatenation of several chunks of svnlook info output (see the section called “svnlook”), and will look
something like:
$ txn-info.sh myrepos
---[ Transaction 19 ]------------------------------------------sally
2001-09-04 11:57:19 -0500 (Tue, 04 Sep 2001)
0
---[ Transaction 3a1 ]------------------------------------------harry
2001-09-10 16:50:30 -0500 (Mon, 10 Sep 2001)
39
Trying to commit over a faulty network.
---[ Transaction a45 ]------------------------------------------sally
2001-09-12 11:09:28 -0500 (Wed, 12 Sep 2001)
0
$
A long-abandoned transaction usually represents some sort of failed or interrupted commit. A transaction's datestamp can provide interesting information—for example, how likely is it that an operation begun nine months ago is still active?
In short, transaction cleanup decisions need not be made unwisely. Various sources of information—including Apache's error and access logs, the logs of successful Subversion commits, and so
on—can be employed in the decision-making process. Finally, an administrator can often simply communicate with a seemingly dead transaction's owner (via email, for example) to verify that the transaction is, in fact, in a zombie state.
Managing Disk Space
While the cost of storage has dropped incredibly in the past few years, disk usage is still a valid concern
87
Repository Administration
for administrators seeking to version large amounts of data. Every additional byte consumed by the live
repository is a byte that needs to be backed up offsite, perhaps multiple times as part of rotating backup
schedules. If using a Berkeley DB repository, the primary storage mechanism is a complex database system, it is useful to know what pieces of data need to remain on the live site, which need to be backed up,
and which can be safely removed. This section is specific to Berkeley DB; FSFS repositories have no
extra data to be cleaned up or reclaimed.
Until recently, the largest offender of disk space usage with respect to Subversion repositories was the
log files to which Berkeley DB performs its pre-writes before modifying the actual database files. These
files capture all the actions taken along the route of changing the database from one state to another—while the database files reflect at any given time some state, the log files contain all the many
changes along the way between states. As such, they can start to accumulate quite rapidly.
Fortunately, beginning with the 4.2 release of Berkeley DB, the database environment has the ability to
remove its own unused log files without any external procedures. Any repositories created using an svnadmin which is compiled against Berkeley DB version 4.2 or greater will be configured for this automatic log file removal. If you don't want this feature enabled, simply pass the --bdb-log-keep option to the svnadmin create command. If you forget to do this, or change your mind at a later time,
simple edit the DB_CONFIG file found in your repository's db directory, comment out the line which
contains the set_flags DB_LOG_AUTOREMOVE directive, and then run svnadmin recover on your
repository to force the configuration changes to take effect. See the section called “Berkeley DB Configuration” for more information about database configuration.
Without some sort of automatic log file removal in place, log files will accumulate as you use your repository. This is actually somewhat of a feature of the database system—you should be able to recreate
your entire database using nothing but the log files, so these files can be useful for catastrophic database
recovery. But typically, you'll want to archive the log files that are no longer in use by Berkeley DB, and
then remove them from disk to conserve space. Use the svnadmin list-unused-dblogs command to list
the unused log files:
$ svnadmin list-unused-dblogs /path/to/repos
/path/to/repos/log.0000000031
/path/to/repos/log.0000000032
/path/to/repos/log.0000000033
$ svnadmin list-unused-dblogs /path/to/repos | xargs rm
## disk space reclaimed!
To keep the size of the repository as small as possible, Subversion uses deltification (or, “deltified storage”) within the repository itself. Deltification involves encoding the representation of a chunk of data
as a collection of differences against some other chunk of data. If the two pieces of data are very similar,
this deltification results in storage savings for the deltified chunk—rather than taking up space equal to
the size of the original data, it only takes up enough space to say, “I look just like this other piece of data
over here, except for the following couple of changes”. Specifically, each time a new version of a file is
committed to the repository, Subversion encodes the previous version (actually, several previous versions) as a delta against the new version. The result is that most of the repository data that tends to be
sizable—namely, the contents of versioned files—is stored at a much smaller size than the original
“fulltext” representation of that data.
Note
Because all of the Subversion repository data that is subject to deltification is stored in a
single Berkeley DB database file, reducing the size of the stored values will not necessarily
reduce the size of the database file itself. Berkeley DB will, however, keep internal records
of unused areas of the database file, and use those areas first before growing the size of the
database file. So while deltification doesn't produce immediate space savings, it can
drastically slow future growth of the database.
88
Repository Administration
Repository Recovery
As mentioned in the section called “Berkeley DB”, a Berkeley DB repository can sometimes be left in
frozen state if not closed properly. When this happens, an administrator needs to rewind the database
back into a consistent state.
In order to protect the data in your repository, Berkeley DB uses a locking mechanism. This mechanism
ensures that portions of the database are not simultaneously modified by multiple database accessors,
and that each process sees the data in the correct state when that data is being read from the database.
When a process needs to change something in the database, it first checks for the existence of a lock on
the target data. If the data is not locked, the process locks the data, makes the change it wants to make,
and then unlocks the data. Other processes are forced to wait until that lock is removed before they are
permitted to continue accessing that section of the database. (This has nothing to do with the locks that
you, as a user, can apply to versioned files within the repository; see Three meanings of “lock” for more
information.)
In the course of using your Subversion repository, fatal errors (such as running out of disk space or
available memory) or interruptions can prevent a process from having the chance to remove the locks it
has placed in the database. The result is that the back-end database system gets “wedged”. When this
happens, any attempts to access the repository hang indefinitely (since each new accessor is waiting for
a lock to go away—which isn't going to happen).
First, if this happens to your repository, don't panic. The Berkeley DB filesystem takes advantage of
database transactions and checkpoints and pre-write journaling to ensure that only the most catastrophic
of events 5 can permanently destroy a database environment. A sufficiently paranoid repository administrator will be making off-site backups of the repository data in some fashion, but don't call your system
administrator to restore a backup tape just yet.
Secondly, use the following recipe to attempt to “unwedge” your repository:
1. Make sure that there are no processes accessing (or attempting to access) the repository. For networked repositories, this means shutting down the Apache HTTP Server, too.
2. Become the user who owns and manages the repository. This is important, as recovering a repository
while running as the wrong user can tweak the permissions of the repository's files in such a way that
your repository will still be inaccessible even after it is “unwedged”.
3. Run the command svnadmin recover /path/to/repos. You should see output like this:
Repository lock acquired.
Please wait; recovering the repository may take some time...
Recovery completed.
The latest repos revision is 19.
This command may take many minutes to complete.
4. Restart the Subversion server.
This procedure fixes almost every case of repository lock-up. Make sure that you run this command as
the user that owns and manages the database, not just as root. Part of the recovery process might involve recreating from scratch various database files (shared memory regions, for example). Recovering
as root will create those files such that they are owned by root, which means that even after you restore connectivity to your repository, regular users will be unable to access it.
5
E.g.: hard drive + huge electromagnet = disaster.
89
Repository Administration
If the previous procedure, for some reason, does not successfully unwedge your repository, you should
do two things. First, move your broken repository out of the way and restore your latest backup of it.
Then, send an email to the Subversion user list (at <users@subversion.tigris.org>) describing your problem in detail. Data integrity is an extremely high priority to the Subversion developers.
Migrating a Repository
A Subversion filesystem has its data spread throughout various database tables in a fashion generally understood by (and of interest to) only the Subversion developers themselves. However, circumstances
may arise that call for all, or some subset, of that data to be collected into a single, portable, flat file
format. Subversion provides such a mechanism, implemented in a pair of svnadmin subcommands:
dump and load.
The most common reason to dump and load a Subversion repository is due to changes in Subversion itself. As Subversion matures, there are times when certain changes made to the back-end database
schema cause Subversion to be incompatible with previous versions of the repository. Other reasons for
dumping and loading might be to migrate a Berkeley DB repository to a new OS or CPU architecture, or
to switch between Berkeley DB and FSFS back-ends. The recommended course of action is relatively
simple:
1. Using your current version of svnadmin, dump your repositories to dump files.
2. Upgrade to the new version of Subversion.
3. Move your old repositories out of the way, and create new empty ones in their place using your new
svnadmin.
4. Again using your new svnadmin, load your dump files into their respective, just-created repositories.
5. Be sure to copy any customizations from your old repositories to the new ones, including
DB_CONFIG files and hook scripts. You'll want to pay attention to the release notes for the new release of Subversion to see if any changes since your last upgrade affect those hooks or configuration
options.
6. If the migration process made your repository accessible at a different URL (e.g. moved to a different
computer, or is being accessed via a different schema), then you'll probably want to tell your users to
run svn switch --relocate on their existing working copies. See svn switch.
svnadmin dump will output a range of repository revisions that are formatted using Subversion's custom filesystem dump format. The dump format is printed to the standard output stream, while informative messages are printed to the standard error stream. This allows you to redirect the output stream to a
file while watching the status output in your terminal window. For example:
$ svnlook youngest myrepos
26
$ svnadmin dump myrepos > dumpfile
* Dumped revision 0.
* Dumped revision 1.
* Dumped revision 2.
…
* Dumped revision 25.
* Dumped revision 26.
At the end of the process, you will have a single file (dumpfile in the previous example) that contains
all the data stored in your repository in the requested range of revisions. Note that svnadmin dump is
90
Repository Administration
reading revision trees from the repository just like any other “reader” process would (svn checkout, for
example). So it's safe to run this command at any time.
The other subcommand in the pair, svnadmin load, parses the standard input stream as a Subversion repository dump file, and effectively replays those dumped revisions into the target repository for that operation. It also gives informative feedback, this time using the standard output stream:
$ svnadmin load newrepos < dumpfile
<<< Started new txn, based on original revision 1
* adding path : A ... done.
* adding path : A/B ... done.
…
------- Committed new rev 1 (loaded from original rev 1) >>>
<<< Started new txn, based on original revision 2
* editing path : A/mu ... done.
* editing path : A/D/G/rho ... done.
------- Committed new rev 2 (loaded from original rev 2) >>>
…
<<< Started new txn, based on original revision 25
* editing path : A/D/gamma ... done.
------- Committed new rev 25 (loaded from original rev 25) >>>
<<< Started new txn, based on original revision 26
* adding path : A/Z/zeta ... done.
* editing path : A/mu ... done.
------- Committed new rev 26 (loaded from original rev 26) >>>
The result of a load is new revisions added to a repository—the same thing you get by making commits
against that repository from a regular Subversion client. And just as in a commit, you can use hook
scripts to perform actions before and after each of the commits made during a load process. By passing
the --use-pre-commit-hook and --use-post-commit-hook options to svnadmin load, you
can instruct Subversion to execute the pre-commit and post-commit hook scripts, respectively, for each
loaded revision. You might use these, for example, to ensure that loaded revisions pass through the same
validation steps that regular commits pass through. Of course, you should use these options with
care—if your post-commit hook sends emails to a mailing list for each new commit, you might not want
to spew hundreds or thousands of commit emails in rapid succession at that list for each of the loaded revisions! You can read more about the use of hook scripts in the section called “Hook Scripts”.
Note that because svnadmin uses standard input and output streams for the repository dump and load
process, people who are feeling especially saucy can try things like this (perhaps even using different
versions of svnadmin on each side of the pipe):
$ svnadmin create newrepos
$ svnadmin dump myrepos | svnadmin load newrepos
By default, the dump file will be quite large—much larger than the repository itself. That's because
every version of every file is expressed as a full text in the dump file. This is the fastest and simplest behavior, and nice if you're piping the dump data directly into some other process (such as a compression
program, filtering program, or into a loading process). But if you're creating a dump file for longer-term
storage, you'll likely want to save disk space by using the --deltas switch. With this option, successive revisions of files will be output as compressed, binary differences—just as file revisions are stored in
91
Repository Administration
a repository. This option is slower, but results in a dump file much closer in size to the original repository.
We mentioned previously that svnadmin dump outputs a range of revisions. Use the --revision option to specify a single revision to dump, or a range of revisions. If you omit this option, all the existing
repository revisions will be dumped.
$ svnadmin dump myrepos --revision 23 > rev-23.dumpfile
$ svnadmin dump myrepos --revision 100:200 > revs-100-200.dumpfile
As Subversion dumps each new revision, it outputs only enough information to allow a future loader to
re-create that revision based on the previous one. In other words, for any given revision in the dump file,
only the items that were changed in that revision will appear in the dump. The only exception to this rule
is the first revision that is dumped with the current svnadmin dump command.
By default, Subversion will not express the first dumped revision as merely differences to be applied to
the previous revision. For one thing, there is no previous revision in the dump file! And secondly, Subversion cannot know the state of the repository into which the dump data will be loaded (if it ever, in
fact, occurs). To ensure that the output of each execution of svnadmin dump is self-sufficient, the first
dumped revision is by default a full representation of every directory, file, and property in that revision
of the repository.
However, you can change this default behavior. If you add the --incremental option when you
dump your repository, svnadmin will compare the first dumped revision against the previous revision in
the repository, the same way it treats every other revision that gets dumped. It will then output the first
revision exactly as it does the rest of the revisions in the dump range—mentioning only the changes that
occurred in that revision. The benefit of this is that you can create several small dump files that can be
loaded in succession, instead of one large one, like so:
$ svnadmin dump myrepos --revision 0:1000 > dumpfile1
$ svnadmin dump myrepos --revision 1001:2000 --incremental > dumpfile2
$ svnadmin dump myrepos --revision 2001:3000 --incremental > dumpfile3
These dump files could be loaded into a new repository with the following command sequence:
$ svnadmin load newrepos < dumpfile1
$ svnadmin load newrepos < dumpfile2
$ svnadmin load newrepos < dumpfile3
Another neat trick you can perform with this --incremental option involves appending to an existing dump file a new range of dumped revisions. For example, you might have a post-commit hook
that simply appends the repository dump of the single revision that triggered the hook. Or you might
have a script that runs nightly to append dump file data for all the revisions that were added to the repository since the last time the script ran. Used like this, svnadmin's dump and load commands can be a
valuable means by which to backup changes to your repository over time in case of a system crash or
some other catastrophic event.
The dump format can also be used to merge the contents of several different repositories into a single repository. By using the --parent-dir option of svnadmin load, you can specify a new virtual root
directory for the load process. That means if you have dump files for three repositories, say calcdumpfile, cal-dumpfile, and ss-dumpfile, you can first create a new repository to hold them
all:
$ svnadmin create /path/to/projects
92
Repository Administration
$
Then, make new directories in the repository which will encapsulate the contents of each of the three
previous repositories:
$ svn mkdir -m "Initial project roots" \
file:///path/to/projects/calc \
file:///path/to/projects/calendar \
file:///path/to/projects/spreadsheet
Committed revision 1.
$
Lastly, load the individual dump files into their respective locations in the new repository:
$ svnadmin load /path/to/projects --parent-dir calc < calc-dumpfile
…
$ svnadmin load /path/to/projects --parent-dir calendar < cal-dumpfile
…
$ svnadmin load /path/to/projects --parent-dir spreadsheet < ss-dumpfile
…
$
We'll mention one final way to use the Subversion repository dump format—conversion from a different
storage mechanism or version control system altogether. Because the dump file format is, for the most
part, human-readable, 6 it should be relatively easy to describe generic sets of changes—each of which
should be treated as a new revision—using this file format. In fact, the cvs2svn utility (see the section
called “Converting a Repository from CVS to Subversion”) uses the dump format to represent the contents of a CVS repository so that those contents can be copied into a Subversion repository.
Repository Backup
Despite numerous advances in technology since the birth of the modern computer, one thing unfortunately rings true with crystalline clarity—sometimes, things go very, very awry. Power outages, network
connectivity dropouts, corrupt RAM and crashed hard drives are but a taste of the evil that Fate is poised
to unleash on even the most conscientious administrator. And so we arrive at a very important topic—how to make backup copies of your repository data.
There are generally two types of backup methods available for Subversion repository administrators—incremental and full. We discussed in an earlier section of this chapter how to use svnadmin
dump --incremental to perform an incremental backup (see the section called “Migrating a
Repository”). Essentially, the idea is to only backup at a given time the changes to the repository since
the last time you made a backup.
A full backup of the repository is quite literally a duplication of the entire repository directory (which includes either Berkeley database or FSFS environment). Now, unless you temporarily disable all other
access to your repository, simply doing a recursive directory copy runs the risk of generating a faulty
backup, since someone might be currently writing to the database.
In the case of Berkeley DB, Sleepycat documents describe a certain order in which database files can be
copied that will guarantee a valid backup copy. And a similar ordering exists for FSFS data. Better still,
you don't have to implement these algorithms yourself, because the Subversion development team has
already done so. The hot-backup.py script is found in the tools/backup/ directory of the Subversion source distribution. Given a repository path and a backup location, hot-backup.py—which is really
6
The Subversion repository dump format resembles an RFC-822 format, the same type of format used for most email.
93
Repository Administration
just a more intelligent wrapper around the svnadmin hotcopy command—will perform the necessary
steps for backing up your live repository—without requiring that you bar public repository access at
all—and then will clean out the dead Berkeley log files from your live repository.
Even if you also have an incremental backup, you might want to run this program on a regular basis. For
example, you might consider adding hot-backup.py to a program scheduler (such as cron on Unix systems). Or, if you prefer fine-grained backup solutions, you could have your post-commit hook script call
hot-backup.py (see the section called “Hook Scripts”), which will then cause a new backup of your repository to occur with every new revision created. Simply add the following to the hooks/
post-commit script in your live repository directory:
(cd /path/to/hook/scripts; ./hot-backup.py ${REPOS} /path/to/backups &)
The resulting backup is a fully functional Subversion repository, able to be dropped in as a replacement
for your live repository should something go horribly wrong.
There are benefits to both types of backup methods. The easiest is by far the full backup, which will always result in a perfect working replica of your repository. This again means that should something bad
happen to your live repository, you can restore from the backup with a simple recursive directory copy.
Unfortunately, if you are maintaining multiple backups of your repository, these full copies will each eat
up just as much disk space as your live repository.
Incremental backups using the repository dump format are excellent to have on hand if the database
schema changes between successive versions of Subversion itself. Since a complete repository dump
and load are generally required to upgrade your repository to the new schema, it's very convenient to
already have half of that process (the dump part) finished. Unfortunately, the creation of—and restoration from—incremental backups takes longer, as each commit is effectively replayed into either the
dump file or the repository.
In either backup scenario, repository administrators need to be aware of how modifications to unversioned revision properties affect their backups. Since these changes do not themselves generate new revisions, they will not trigger post-commit hooks, and may not even trigger the pre-revprop-change and
post-revprop-change hooks. 7 And since you can change revision properties without respect to chronological order—you can change any revision's properties at any time—an incremental backup of the latest
few revisions might not catch a property modification to a revision that was included as part of a previous backup.
Generally speaking, only the truly paranoid would need to backup their entire repository, say, every time
a commit occurred. However, assuming that a given repository has some other redundancy mechanism
in place with relatively fine granularity (like per-commit emails), a hot backup of the database might be
something that a repository administrator would want to include as part of a system-wide nightly
backup. For most repositories, archived commit emails alone provide sufficient redundancy as restoration sources, at least for the most recent few commits. But it's your data—protect it as much as you'd
like.
Often, the best approach to repository backups is a diversified one. You can leverage combinations of
full and incremental backups, plus archives of commit emails. The Subversion developers, for example,
back up the Subversion source code repository after every new revision is created, and keep an archive
of all the commit and property change notification emails. Your solution might be similar, but should be
catered to your needs and that delicate balance of convenience with paranoia. And while all of this might
not save your hardware from the iron fist of Fate, 8 it should certainly help you recover from those trying
times.
7
svnadmin
8
setlog can be called in a way that bypasses the hook interface altogether.
You know—the collective term for all of her “fickle fingers”.
94
Repository Administration
Adding Projects
Once your repository is created and configured, all that remains is to begin using it. If you have a collection of existing data that is ready to be placed under version control, you will more than likely want to
use the svn client program's import subcommand to accomplish that. Before doing this, though, you
should carefully consider your long-term plans for the repository. In this section, we will offer some advice on how to plan the layout of your repository, and how to get your data arranged in that layout.
Choosing a Repository Layout
While Subversion allows you to move around versioned files and directories without any loss of information, doing so can still disrupt the workflow of those who access the repository often and come to expect things to be at certain locations. Try to peer into the future a bit; plan ahead before placing your
data under version control. By “laying out” the contents of your repositories in an effective manner the
first time, you can prevent a load of future headaches.
There are a few things to consider when setting up Subversion repositories. Let's assume that as repository administrator, you will be responsible for supporting the version control system for several projects.
The first decision is whether to use a single repository for multiple projects, or to give each project its
own repository, or some compromise of these two.
There are benefits to using a single repository for multiple projects, most obviously the lack of duplicated maintenance. A single repository means that there is one set of hook scripts, one thing to routinely
backup, one thing to dump and load if Subversion releases an incompatible new version, and so on.
Also, you can move data between projects easily, and without losing any historical versioning information.
The downside of using a single repository is that different projects may have different commit mailing
lists or different authentication and authorization requirements. Also, remember that Subversion uses repository-global revision numbers. Some folks don't like the fact that even though no changes have been
made to their project lately, the youngest revision number for the repository keeps climbing because other projects are actively adding new revisions.
A middle-ground approach can be taken, too. For example, projects can be grouped by how well they relate to each other. You might have a few repositories with a handful of projects in each repository. That
way, projects that are likely to want to share data can do so easily, and as new revisions are added to the
repository, at least the developers know that those new revisions are at least remotely related to everyone who uses that repository.
After deciding how to organize your projects with respect to repositories, you'll probably want to think
about directory hierarchies in the repositories themselves. Because Subversion uses regular directory
copies for branching and tagging (see Chapter 4, Branching and Merging), the Subversion community
recommends that you choose a repository location for each project root—the “top-most” directory
which contains data related to that project—and then create three subdirectories beneath that root:
trunk, meaning the directory under which the main project development occurs; branches, which is
a directory in which to create various named branches of the main development line; tags, which is a
directory of branches that are created, and perhaps destroyed, but never changed. 9
For example, your repository might look like:
/
calc/
trunk/
tags/
branches/
9
The trunk, tags, and branches trio are sometimes referred to as “the TTB directories”.
95
Repository Administration
calendar/
trunk/
tags/
branches/
spreadsheet/
trunk/
tags/
branches/
…
Note that it doesn't matter where in your repository each project root is. If you have only one project per
repository, the logical place to put each project root is at the root of that project's respective repository.
If you have multiple projects, you might want to arrange them in groups inside the repository, perhaps
putting projects with similar goals or shared code in the same subdirectory, or maybe just grouping them
alphabetically. Such an arrangement might look like:
/
utils/
calc/
trunk/
tags/
branches/
calendar/
trunk/
tags/
branches/
…
office/
spreadsheet/
trunk/
tags/
branches/
…
Lay out your repository in whatever way you see fit. Subversion does not expect or enforce a layout
schema—in its eyes, a directory is a directory is a directory. Ultimately, you should choose the repository arrangement that meets the needs of the people who work on the projects that live there.
Creating the Layout, and Importing Initial Data
After deciding how to arrange the projects in your repository, you'll probably want to actually populate
the repository with that layout and with initial project data. There are a couple of ways to do this in Subversion. You could use the svn mkdir command (see Chapter 9, Subversion Complete Reference) to create each directory in your skeletal repository layout, one-by-one. A quicker way to accomplish the same
task is to use the svn import command (see the section called “svn import”). By first creating the layout in a temporary location on your drive, you can import the whole layout tree into the repository in a
single commit:
$
$
$
$
$
$
$
$
$
mkdir tmpdir
cd tmpdir
mkdir projectA
mkdir projectA/trunk
mkdir projectA/branches
mkdir projectA/tags
mkdir projectB
mkdir projectB/trunk
mkdir projectB/branches
96
Repository Administration
$ mkdir projectB/tags
…
$ svn import . file:///path/to/repos --message 'Initial repository layout'
Adding
projectA
Adding
projectA/trunk
Adding
projectA/branches
Adding
projectA/tags
Adding
projectB
Adding
projectB/trunk
Adding
projectB/branches
Adding
projectB/tags
…
Committed revision 1.
$ cd ..
$ rm -rf tmpdir
$
You can verify the results of the import by running the svn list command:
$ svn list --verbose file:///path/to/repos
1 harry
May 08 21:48 projectA/
1 harry
May 08 21:48 projectB/
…
$
Once you have your skeletal layout in place, you can begin importing actual project data into your repository, if any such data exists yet. Once again, there are several ways to do this. You could use the svn
import command. You could checkout a working copy from your new repository, move and arrange
project data inside the working copy, and use the svn add and svn commit commands. But once we
start talking about such things, we're no longer discussing repository administration. If you aren't already
familiar with the svn client program, see Chapter 3, Guided Tour.
Summary
By now you should have a basic understanding of how to create, configure, and maintain Subversion repositories. We've introduced you to the various tools that will assist you with this task. Throughout the
chapter, we've noted common administration pitfalls, and suggestions for avoiding them.
All that remains is for you to decide what exciting data to store in your repository, and finally, how to
make it available over a network. The next chapter is all about networking.
97
Chapter 6. Server Configuration
A Subversion repository can be accessed simultaneously by clients running on the same machine on
which the repository resides using the file:/// method. But the typical Subversion setup involves a
single server machine being accessed from clients on computers all over the office—or, perhaps, all over
the world.
This section describes how to get your Subversion repository exposed outside its host machine for use
by remote clients. We will cover Subversion's currently available server mechanisms, discussing the
configuration and use of each. After reading this section, you should be able to decide which networking
setup is right for your needs, and understand how to enable such a setup on your host computer.
Overview
Subversion was designed with an abstract network layer. This means that a repository can be programmatically accessed by any sort of server process, and the client “repository access” API allows programmers to write plugins that speak relevant network protocols. In theory, Subversion can use an infinite
number of network implementations. In practice, there are only two servers at the time of writing.
Apache is an extremely popular webserver; using the mod_dav_svn module, Apache can access a repository and make it available to clients via the WebDAV/DeltaV protocol, which is an extension of
HTTP. In the other corner is svnserve: a small, standalone server program that speaks a custom protocol
with clients. Table 6.1, “Network Server Comparison” presents a comparison of the two servers.
Note that Subversion, as an open-source project, does not officially endorse any server as “primary” or
“official”. Neither network implementation is treated as a second-class citizen; each server has advantages and disadvantages. In fact, it's possible for different servers to run in parallel, each accessing your
repositories in its own way, and each without hindering the other (see the section called “Supporting
Multiple Repository Access Methods”). Table 6.1, “Network Server Comparison” gives a brief overview and comparison of the two available Subversion servers—as an administrator, it's up to you to
choose whatever works best for you and your users.
Table 6.1. Network Server Comparison
Feature
Apache + mod_dav_svn
Authentication options
HTTP(S) basic auth, X.509 certi- CRAM-MD5 or SSH
ficates, LDAP, NTLM, or any
other mechanism available to
Apache httpd
User account options
private 'users' file
Authorization options
blanket read/write access, or per- blanket read/write access, or perdirectory read/write control
directory write (but not read)
control using a pre-commit hook
Encryption
via optional SSL
Interoperability
partially usable by other Web- not interoperable
DAV clients
Web viewing
limited built-in support, or via via 3rd-party
3rd-party tools such as ViewVC ViewVC
Speed
somewhat slower
somewhat faster
Initial setup
somewhat complex
fairly simple
98
svnserve
private 'users' file, or existing
system (SSH) accounts
via optional SSH tunnel
tools
such
as
Server Configuration
Network Model
This section is a general discussion of how a Subversion client and server interact with one another, regardless of the network implementation you're using. After reading, you'll have a good understanding of
how a server can behave and the different ways in which a client can be configured to respond.
Requests and Responses
The Subversion client spends most of its time managing working copies. When it needs information
from a repository, however, it makes a network request, and the server responds with an appropriate answer. The details of the network protocol are hidden from the user; the client attempts to access a URL,
and depending on the URL schema, a particular protocol is used to contact the server (see Repository
URLs). Users can run svn --version to see which URL schemas and protocols the client knows how to
use.
When the server process receives a client request, it typically demands that the client identify itself. It issues an authentication challenge to the client, and the client responds by providing credentials back to
the server. Once authentication is complete, the server responds with the original information the client
asked for. Notice that this system is different from systems like CVS, where the client pre-emptively offers credentials (“logs in”) to the server before ever making a request. In Subversion, the server “pulls”
credentials by challenging the client at the appropriate moment, rather than the client “pushing” them.
This makes certain operations more elegant. For example, if a server is configured to allow anyone in
the world to read a repository, then the server will never issue an authentication challenge when a client
attempts to svn checkout.
If the client's network request writes new data to the repository (e.g. svn commit), then a new revision
tree is created. If the client's request was authenticated, then the authenticated user's name is stored as
the value of the svn:author property on the new revision (see the section called “Unversioned Properties”). If the client was not authenticated (in other words, the server never issued an authentication
challenge), then the revision's svn:author property is empty. 1
Client Credentials Caching
Many servers are configured to require authentication on every request. This can become a big annoyance to users, who are forced to type their passwords over and over again.
Happily, the Subversion client has a remedy for this: a built-in system for caching authentication credentials on disk. By default, whenever the command-line client successfully responds to a server's authentication challenge, it saves the credentials in the user's private runtime configuration area—in
~/.subversion/auth/ on Unix-like systems or %APPDATA%/Subversion/auth/ on Windows. (The runtime area is covered in more detail in the section called “Runtime Configuration Area”.)
Successful credentials are cached on disk, keyed on a combination of hostname, port, and authentication
realm.
When the client receives an authentication challenge, it first looks for the appropriate credentials in the
user's disk cache; if not present, or if the cached credentials fail to authenticate, then the client simply
prompts the user for the information.
Security-conscious people may be thinking to themselves, “Caching passwords on disk? That's terrible!
You should never do that!” Please remain calm, it's not as dangerous as it sounds.
• The auth/ caching area is permission-protected so that only the user (owner) can read data from it,
not the world at large. The operating system's own file permissions are protecting the password.
1
This problem is actually a FAQ, resulting from a misconfigured server setup.
99
Server Configuration
• On Windows 2000 and later, the Subversion client uses standard Windows cryptography services to
encrypt the password on disk. Because the encryption key is managed by Windows and is tied to the
user's own login credentials, only the user can decrypt the cached password. (Note: if the user's Windows account password is reset by an administrator, all of the cached passwords become undecipherable. The Subversion client will behave as if they don't exist, prompting for passwords when required.)
• For the truly paranoid willing to sacrifice all convenience, it's possible to disable credential caching
altogether.
To disable caching for a single command, pass the --no-auth-cache option:
$ svn commit -F log_msg.txt --no-auth-cache
Authentication realm: <svn://host.example.com:3690> example realm
Username: joe
Password for 'joe':
Adding
newfile
Transmitting file data .
Committed revision 2324.
# password was not cached, so a second commit still prompts us
$ svn delete newfile
$ svn commit -F new_msg.txt
Authentication realm: <svn://host.example.com:3690> example realm
Username: joe
…
Or, if you want to disable credential caching permanently, you can edit your runtime config file
(located next to the auth/ directory). Simply set store-auth-creds to no, and no credentials will
be cached on disk, ever.
[auth]
store-auth-creds = no
Sometimes users will want to remove specific credentials from the disk cache. To do this, you need to
navigate into the auth/ area and manually delete the appropriate cache file. Credentials are cached in
individual files; if you look inside each file, you will see keys and values. The svn:realmstring
key describes the particular server realm that the file is associated with:
$ ls ~/.subversion/auth/svn.simple/
5671adf2865e267db74f09ba6f872c28
3893ed123b39500bca8a0b382839198e
5c3c22968347b390f349ff340196ed39
$ cat ~/.subversion/auth/svn.simple/5671adf2865e267db74f09ba6f872c28
K 8
username
V 3
joe
K 8
password
V 4
blah
100
Server Configuration
K 15
svn:realmstring
V 45
<https://svn.domain.com:443> Joe's repository
END
Once you have located the proper cache file, just delete it.
One last word about client authentication behavior: a bit of explanation about the --username and -password options is needed. Many client subcommands accept these options; however it is important to understand using these options does not automatically send credentials to the server. As discussed
earlier, the server “pulls” credentials from the client when it deems necessary; the client cannot “push”
them at will. If a username and/or password are passed as options, they will only be presented to the
server if the server requests them. 2 Typically, these options are used when:
• the user wants to authenticate as a different user than her system login name, or
• a script wants to authenticate without using cached credentials.
Here is a final summary that describes how a Subversion client behaves when it receives an authentication challenge:
1. Check whether the user specified any credentials as command-line options, via --username and/or
--password. If not, or if these options fail to authenticate successfully, then
2. Look up the server's realm in the runtime auth/ area, to see if the user already has the appropriate
credentials cached. If not, or if the cached credentials fail to authenticate, then
3. Resort to prompting the user.
If the client successfully authenticates by any of the methods listed above, it will attempt to cache the
credentials on disk (unless the user has disabled this behavior, as mentioned earlier).
svnserve, a custom server
The svnserve program is a lightweight server, capable of speaking to clients over TCP/IP using a custom, stateful protocol. Clients contact an svnserve server by using URLs that begin with the svn:// or
svn+ssh:// schema. This section will explain the different ways of running svnserve, how clients
authenticate themselves to the server, and how to configure appropriate access control to your repositories.
Invoking the Server
There are a few different ways to invoke the svnserve program. If invoked with no options, you'll see
nothing but a help message. However, if you're planning to have inetd launch the process, then you can
pass the -i (--inetd) option:
2
Again, a common mistake is to misconfigure a server so that it never issues an authentication challenge. When users pass -username and --password options to the client, they're surprised to see that they're never used, i.e. new revisions still appear to have been committed anonymously!
101
Server Configuration
$ svnserve -i
( success ( 1 2 ( ANONYMOUS ) ( edit-pipeline ) ) )
When invoked with the --inetd option, svnserve attempts to speak with a Subversion client via stdin
and stdout using a custom protocol. This is the standard behavior for a program being run via inetd. The
IANA has reserved port 3690 for the Subversion protocol, so on a Unix-like system you can add lines to
/etc/services like these (if they don't already exist):
svn
svn
3690/tcp
3690/udp
# Subversion
# Subversion
And if your system is using a classic Unix-like inetd daemon, you can add this line to /
etc/inetd.conf:
svn stream tcp nowait svnowner /usr/bin/svnserve svnserve -i
Make sure “svnowner” is a user which has appropriate permissions to access your repositories. Now,
when a client connection comes into your server on port 3690, inetd will spawn an svnserve process to
service it.
On a Windows system, third-party tools exist to run svnserve as a service. Look on Subversion's website for a list of these tools.
A second option is to run svnserve as a standalone “daemon” process. Use the -d option for this:
$ svnserve -d
$
# svnserve is now running, listening on port 3690
When running svnserve in daemon mode, you can use the --listen-port= and -listen-host= options to customize the exact port and hostname to “bind” to.
There's still a third way to invoke svnserve, and that's in “tunnel mode”, with the -t option. This mode
assumes that a remote-service program such as RSH or SSH has successfully authenticated a user and is
now invoking a private svnserve process as that user. The svnserve program behaves normally
(communicating via stdin and stdout), and assumes that the traffic is being automatically redirected over
some sort of tunnel back to the client. When svnserve is invoked by a tunnel agent like this, be sure that
the authenticated user has full read and write access to the repository database files. (See Servers and
Permissions: A Word of Warning.) It's essentially the same as a local user accessing the repository via
file:/// URLs.
Servers and Permissions: A Word of Warning
First, remember that a Subversion repository is a collection of database files; any process which
accesses the repository directly needs to have proper read and write permissions on the entire repository. If you're not careful, this can lead to a number of headaches, especially if you're using a
Berkeley DB database rather than FSFS. Be sure to read the section called “Supporting Multiple
Repository Access Methods”.
Secondly, when configuring svnserve, Apache httpd, or any other server process, keep in mind
that you might not want to launch the server process as the user root (or as any other user with
unlimited permissions). Depending on the ownership and permissions of the repositories you're
102
Server Configuration
exporting, it's often prudent to use a different—perhaps custom—user. For example, many administrators create a new user named svn, grant that user exclusive ownership and rights to the exported Subversion repositories, and only run their server processes as that user.
Once the svnserve program is running, it makes every repository on your system available to the network. A client needs to specify an absolute path in the repository URL. For example, if a repository is
located at /usr/local/repositories/project1, then a client would reach it via
svn://host.example.com/usr/local/repositories/project1 . To increase security,
you can pass the -r option to svnserve, which restricts it to exporting only repositories below that path:
$ svnserve -d -r /usr/local/repositories
…
Using the -r option effectively modifies the location that the program treats as the root of the remote
filesystem space. Clients then use URLs that have that path portion removed from them, leaving much
shorter (and much less revealing) URLs:
$ svn checkout svn://host.example.com/project1
…
Built-in authentication and authorization
When a client connects to an svnserve process, the following things happen:
• The client selects a specific repository.
• The server processes the repository's conf/svnserve.conf file, and begins to enforce any authentication and authorization policies defined therein.
• Depending on the situation and authorization policies,
• the client may be allowed to make requests anonymously, without ever receiving an authentication
challenge, OR
• the client may be challenged for authentication at any time, OR
• if operating in “tunnel mode”, the client will declare itself to be already externally authenticated.
At the time of writing, the server only knows how to send a CRAM-MD5 3 authentication challenge. In
essence, the server sends a bit of data to the client. The client uses the MD5 hash algorithm to create a
fingerprint of the data and password combined, then sends the fingerprint as a response. The server performs the same computation with the stored password to verify that the result is identical. At no point
does the actual password travel over the network.
It's also possible, of course, for the client to be externally authenticated via a tunnel agent, such as SSH.
In that case, the server simply examines the user it's running as, and uses it as the authenticated username. For more on this, see the section called “SSH authentication and authorization”.
As you've already guessed, a repository's svnserve.conf file is the central mechanism for controlling authentication and authorization policies. The file has the same format as other configuration
3
See RFC 2195.
103
Server Configuration
files (see the section called “Runtime Configuration Area”): section names are marked by square brackets ([ and ]), comments begin with hashes (#), and each section contains specific variables that can be
set (variable = value). Let's walk through this file and learn how to use them.
Create a 'users' file and realm
For now, the [general] section of the svnserve.conf has all the variables you need. Begin by
defining a file which contains usernames and passwords, and an authentication realm:
[general]
password-db = userfile
realm = example realm
The realm is a name that you define. It tells clients which sort of “authentication namespace” they're
connecting to; the Subversion client displays it in the authentication prompt, and uses it as a key (along
with the server's hostname and port) for caching credentials on disk (see the section called “Client Credentials Caching”). The password-db variable points to a separate file that contains a list of usernames and passwords, using the same familiar format. For example:
[users]
harry = foopassword
sally = barpassword
The value of password-db can be an absolute or relative path to the users file. For many admins, it's
easy to keep the file right in the conf/ area of the repository, alongside svnserve.conf. On the
other hand, it's possible you may want to have two or more repositories share the same users file; in that
case, the file should probably live in a more public place. The repositories sharing the users file should
also be configured to have the same realm, since the list of users essentially defines an authentication
realm. Wherever the file lives, be sure to set the file's read and write permissions appropriately. If you
know which user(s) svnserve will run as, restrict read access to the user file as necessary.
Set access controls
There are two more variables to set in the svnserve.conf file: they determine what unauthenticated
(anonymous) and authenticated users are allowed to do. The variables anon-access and authaccess can be set to the values none, read, or write. Setting the value to none restricts all access
of any kind; read allows read-only access to the repository, and write allows complete read/write access to the repository. For example:
[general]
password-db = userfile
realm = example realm
# anonymous users can only read the repository
anon-access = read
# authenticated users can both read and write
auth-access = write
The example settings are, in fact, the default values of the variables, should you forget to define them. If
you want to be even more conservative, you can block anonymous access completely:
[general]
password-db = userfile
104
Server Configuration
realm = example realm
# anonymous users aren't allowed
anon-access = none
# authenticated users can both read and write
auth-access = write
Notice that svnserve only understands “blanket” access control. A user either has universal read/write
access, universal read access, or no access. There is no detailed control over access to specific paths
within the repository. For many projects and sites, this level of access control is more than adequate.
However, if you need per-directory access control, you'll need to use either use Apache with
mod_authz_svn (see the section called “Per-Directory Access Control”) or use a pre-commit hook
script to control write access (see the section called “Hook Scripts”). The Subversion distribution comes
with commit-access-control.pl and the more sophisticated svnperms.py scripts for use in pre-commit
scripts.
SSH authentication and authorization
svnserve's built-in authentication can be very handy, because it avoids the need to create real system accounts. On the other hand, some administrators already have well-established SSH authentication frameworks in place. In these situations, all of the project's users already have system accounts and the ability
to “SSH into” the server machine.
It's easy to use SSH in conjunction with svnserve. The client simply uses the svn+ssh:// URL
schema to connect:
$ whoami
harry
$ svn list svn+ssh://host.example.com/repos/project
harry@host.example.com's password: *****
foo
bar
baz
…
In this example, the Subversion client is invoking a local ssh process, connecting to
host.example.com, authenticating as the user harry, then spawning a private svnserve process on
the remote machine running as the user harry. The svnserve command is being invoked in tunnel
mode (-t) and its network protocol is being “tunneled” over the encrypted connection by ssh, the tunnel-agent. svnserve is aware that it's running as the user harry, and if the client performs a commit, the
authenticated username will be attributed as the author of the new revision.
The important thing to understand here is that the Subversion client is not connecting to a running svnserve daemon. This method of access doesn't require a daemon, nor does it notice one if present. It relies
wholly on the ability of ssh to spawn a temporary svnserve process, which then terminates when the
network connection is closed.
When using svn+ssh:// URLs to access a repository, remember that it's the ssh program prompting
for authentication, and not the svn client program. That means there's no automatic password caching
going on (see the section called “Client Credentials Caching”). The Subversion client often makes multiple connections to the repository, though users don't normally notice this due to the password caching
feature. When using svn+ssh:// URLs, however, users may be annoyed by ssh repeatedly asking for
a password for every outbound connection. The solution is to use a separate SSH password-caching tool
105
Server Configuration
like ssh-agent on a Unix-like system, or pageant on Windows.
When running over a tunnel, authorization is primarily controlled by operating system permissions to
the repository's database files; it's very much the same as if Harry were accessing the repository directly
via a file:/// URL. If multiple system users are going to be accessing the repository directly, you
may want to place them into a common group, and you'll need to be careful about umasks. (Be sure to
read the section called “Supporting Multiple Repository Access Methods”.) But even in the case of tunneling, the svnserve.conf file can still be used to block access, by simply setting auth-access
= read or auth-access = none.
You'd think that the story of SSH tunneling would end here, but it doesn't. Subversion allows you to create custom tunnel behaviors in your run-time config file (see the section called “Runtime Configuration Area”). For example, suppose you want to use RSH instead of SSH. In the [tunnels] section of
your config file, simply define it like this:
[tunnels]
rsh = rsh
And now, you can use this new tunnel definition by using a URL schema that matches the name of your
new variable: svn+rsh://host/path. When using the new URL schema, the Subversion client
will actually be running the command rsh host svnserve -t behind the scenes. If you include a username
in the URL (for example, svn+rsh://username@host/path) the client will also include that in
its command (rsh username@host svnserve -t). But you can define new tunneling schemes to be much
more clever than that:
[tunnels]
joessh = $JOESSH /opt/alternate/ssh -p 29934
This example demonstrates a couple of things. First, it shows how to make the Subversion client launch
a very specific tunneling binary (the one located at /opt/alternate/ssh) with specific options. In
this case, accessing a svn+joessh:// URL would invoke the particular SSH binary with -p 29934
as arguments—useful if you want the tunnel program to connect to a non-standard port.
Second, it shows how to define a custom environment variable that can override the name of the tunneling program. Setting the SVN_SSH environment variable is a convenient way to override the default
SSH tunnel agent. But if you need to have several different overrides for different servers, each perhaps
contacting a different port or passing a different set of options to SSH, you can use the mechanism
demonstrated in this example. Now if we were to set the JOESSH environment variable, its value would
override the entire value of the tunnel variable—$JOESSH would be executed instead of /
opt/alternate/ssh -p 29934.
SSH configuration tricks
It's not only possible to control the way in which the client invokes ssh, but also to control the behavior
of sshd on your server machine. In this section, we'll show how to control the exact svnserve command
executed by sshd, as well as how to have multiple users share a single system account.
Initial setup
To begin, locate the home directory of the account you'll be using to launch svnserve. Make sure the account has an SSH public/private keypair installed, and that the user can log in via public-key authentication. Password authentication will not work, since all of the following SSH tricks revolve around using
the SSH authorized_keys file.
If
it
doesn't
already
exist,
create
the
106
authorized_keys
file
(on
Unix,
typically
Server Configuration
~/.ssh/authorized_keys). Each line in this file describes a public key that is allowed to connect.
The lines are typically of the form:
ssh-dsa AAAABtce9euch… user@example.com
The first field describes the type of key, the second field is the uuencoded key itself, and the third field is
a comment. However, it's a lesser known fact that the entire line can be preceded by a command field:
command="program" ssh-dsa AAAABtce9euch… user@example.com
When the command field is set, the SSH daemon will run the named program instead of the typical svnserve -t invocation that the Subversion client asks for. This opens the door to a number of server-side
tricks. In the following examples, we abbreviate the lines of the file as:
command="program" TYPE KEY COMMENT
Controlling the invoked command
Because we can specify the executed server-side command, it's easy to name a specific svnserve binary
to run and to pass it extra arguments:
command="/path/to/svnserve -t -r /virtual/root" TYPE KEY COMMENT
In this example, /path/to/svnserve might be a custom wrapper script around svnserve which sets
the umask (see the section called “Supporting Multiple Repository Access Methods”). It also shows how
to anchor svnserve in a virtual root directory, just as one often does when running svnserve as a daemon
process. This might be done either to restrict access to parts of the system, or simply to relieve the user
of having to type an absolute path in the svn+ssh:// URL.
It's also possible to have multiple users share a single account. Instead of creating a separate system account for each user, generate a public/private keypair for each person. Then place each public key into
the authorized_users file, one per line, and use the --tunnel-user option:
command="svnserve -t --tunnel-user=harry" TYPE1 KEY1 harry@example.com
command="svnserve -t --tunnel-user=sally" TYPE2 KEY2 sally@example.com
This example allows both Harry and Sally to connect to the same account via public-key authentication.
Each of them has a custom command that will be executed; the --tunnel-user option tells svnserve
-t to assume that the named argument is the authenticated user. Without --tunnel-user, it would
appear as though all commits were coming from the one shared system account.
A final word of caution: giving a user access to the server via public-key in a shared account might still
allow other forms of SSH access, even if you've set the command value in authorized_keys. For
example, the user may still get shell access through SSH, or be able to perform X11 or general portforwarding through your server. To give the user as little permission as possible, you may want to specify a number of restrictive options immediately after the command:
command="svnserve -t --tunnel-user=harry",no-port-forwarding,\
no-agent-forwarding,no-X11-forwarding,no-pty \
TYPE1 KEY1 harry@example.com
107
Server Configuration
httpd, the Apache HTTP server
The Apache HTTP Server is a “heavy duty” network server that Subversion can leverage. Via a custom
module, httpd makes Subversion repositories available to clients via the WebDAV/DeltaV protocol,
which is an extension to HTTP 1.1 (see http://www.webdav.org/ for more information). This protocol
takes the ubiquitous HTTP protocol that is the core of the World Wide Web, and adds writing—specifically, versioned writing—capabilities. The result is a standardized, robust system that is
conveniently packaged as part of the Apache 2.0 software, is supported by numerous operating systems
and third-party products, and doesn't require network administrators to open up yet another custom port.
4 While an Apache-Subversion server has more features than svnserve, it's also a bit more difficult to set
up. With flexibility often comes more complexity.
Much of the following discussion includes references to Apache configuration directives. While some
examples are given of the use of these directives, describing them in full is outside the scope of this
chapter. The Apache team maintains excellent documentation, publicly available on their website at http://httpd.apache.org. For example, a general reference for the configuration directives is located at http://httpd.apache.org/docs-2.0/mod/directives.html.
Also, as you make changes to your Apache setup, it is likely that somewhere along the way a mistake
will be made. If you are not already familiar with Apache's logging subsystem, you should become
aware of it. In your httpd.conf file are directives that specify the on-disk locations of the access and
error logs generated by Apache (the CustomLog and ErrorLog directives, respectively). Subversion's mod_dav_svn uses Apache's error logging interface as well. You can always browse the contents
of those files for information that might reveal the source of a problem that is not clearly noticeable otherwise.
Why Apache 2?
If you're a system administrator, it's very likely that you're already running the Apache web server
and have some prior experience with it. At the time of writing, Apache 1.3 is by far the most popular version of Apache. The world has been somewhat slow to upgrade to the Apache 2.X series
for various reasons: some people fear change, especially changing something as critical as a web
server. Other people depend on plug-in modules that only work against the Apache 1.3 API, and
are waiting for a 2.X port. Whatever the reason, many people begin to worry when they first discover that Subversion's Apache module is written specifically for the Apache 2 API.
The proper response to this problem is: don't worry about it. It's easy to run Apache 1.3 and
Apache 2 side-by-side; simply install them to separate places, and use Apache 2 as a dedicated
Subversion server that runs on a port other than 80. Clients can access the repository by placing
the port number into the URL:
$ svn checkout http://host.example.com:7382/repos/project
…
Prerequisites
To network your repository over HTTP, you basically need four components, available in two packages.
You'll need Apache httpd 2.0, the mod_dav DAV module that comes with it, Subversion, and the
mod_dav_svn filesystem provider module distributed with Subversion. Once you have all of those com4
They really hate doing that.
108
Server Configuration
ponents, the process of networking your repository is as simple as:
• getting httpd 2.0 up and running with the mod_dav module,
• installing the mod_dav_svn plugin to mod_dav, which uses Subversion's libraries to access the repository, and
• configuring your httpd.conf file to export (or expose) the repository.
You can accomplish the first two items either by compiling httpd and Subversion from source code, or
by installing pre-built binary packages of them on your system. For the most up-to-date information on
how to compile Subversion for use with the Apache HTTP Server, as well as how to compile and configure Apache itself for this purpose, see the INSTALL file in the top level of the Subversion source
code tree.
Basic Apache Configuration
Once you have all the necessary components installed on your system, all that remains is the configuration of Apache via its httpd.conf file. Instruct Apache to load the mod_dav_svn module using the
LoadModule directive. This directive must precede any other Subversion-related configuration items.
If your Apache was installed using the default layout, your mod_dav_svn module should have been installed in the modules subdirectory of the Apache install location (often /usr/local/apache2).
The LoadModule directive has a simple syntax, mapping a named module to the location of a shared
library on disk:
LoadModule dav_svn_module
modules/mod_dav_svn.so
Note that if mod_dav was compiled as a shared object (instead of statically linked directly to the httpd
binary), you'll need a similar LoadModule statement for it, too. Be sure that it comes before the
mod_dav_svn line:
LoadModule dav_module
LoadModule dav_svn_module
modules/mod_dav.so
modules/mod_dav_svn.so
At a later location in your configuration file, you now need to tell Apache where you keep your Subversion repository (or repositories). The Location directive has an XML-like notation, starting with an
opening tag, and ending with a closing tag, with various other configuration directives in the middle.
The purpose of the Location directive is to instruct Apache to do something special when handling
requests that are directed at a given URL or one of its children. In the case of Subversion, you want
Apache to simply hand off support for URLs that point at versioned resources to the DAV layer. You
can instruct Apache to delegate the handling of all URLs whose path portions (the part of the URL that
follows the server's name and the optional port number) begin with /repos/ to a DAV provider whose
repository is located at /absolute/path/to/repository using the following httpd.conf
syntax:
<Location /repos>
DAV svn
SVNPath /absolute/path/to/repository
</Location>
If you plan to support multiple Subversion repositories that will reside in the same parent directory on
your local disk, you can use an alternative directive, the SVNParentPath directive, to indicate that
109
Server Configuration
common parent directory. For example, if you know you will be creating multiple Subversion repositories in a directory /usr/local/svn that would be accessed via URLs like http://my.server.com/svn/repos1, http://my.server.com/svn/repos2, and so on,
you could use the httpd.conf configuration syntax in the following example:
<Location /svn>
DAV svn
# any "/svn/foo" URL will map to a repository /usr/local/svn/foo
SVNParentPath /usr/local/svn
</Location>
Using the previous syntax, Apache will delegate the handling of all URLs whose path portions begin
with /svn/ to the Subversion DAV provider, which will then assume that any items in the directory
specified by the SVNParentPath directive are actually Subversion repositories. This is a particularly
convenient syntax in that, unlike the use of the SVNPath directive, you don't have to restart Apache in
order to create and network new repositories.
Be sure that when you define your new Location, it doesn't overlap with other exported Locations.
For example, if your main DocumentRoot is /www, do not export a Subversion repository in
<Location /www/repos>. If a request comes in for the URI /www/repos/foo.c, Apache
won't know whether to look for a file repos/foo.c in the DocumentRoot, or whether to delegate
mod_dav_svn to return foo.c from the Subversion repository.
Server Names and the COPY Request
Subversion makes use of the COPY request type to perform server-side copies of files and directories. As part of the sanity checking done by the Apache modules, the source of the copy is expected to be located on the same machine as the destination of the copy. To satisfy this requirement, you might need to tell mod_dav the name you use as the hostname of your server. Generally, you can use the ServerName directive in httpd.conf to accomplish this.
ServerName svn.example.com
If you are using Apache's virtual hosting support via the NameVirtualHost directive, you may
need to use the ServerAlias directive to specify additional names that your server is known
by. Again, refer to the Apache documentation for full details.
At this stage, you should strongly consider the question of permissions. If you've been running Apache
for some time now as your regular web server, you probably already have a collection of content—web
pages, scripts and such. These items have already been configured with a set of permissions that allows
them to work with Apache, or more appropriately, that allows Apache to work with those files. Apache,
when used as a Subversion server, will also need the correct permissions to read and write to your Subversion repository. (See Servers and Permissions: A Word of Warning.)
You will need to determine a permission system setup that satisfies Subversion's requirements without
messing up any previously existing web page or script installations. This might mean changing the permissions on your Subversion repository to match those in use by other things that Apache serves for
you, or it could mean using the User and Group directives in httpd.conf to specify that Apache
should run as the user and group that owns your Subversion repository. There is no single correct way to
set up your permissions, and each administrator will have different reasons for doing things a certain
way. Just be aware that permission-related problems are perhaps the most common oversight when configuring a Subversion repository for use with Apache.
110
Server Configuration
Authentication Options
At this point, if you configured httpd.conf to contain something like
<Location /svn>
DAV svn
SVNParentPath /usr/local/svn
</Location>
…then your repository is “anonymously” accessible to the world. Until you configure some authentication and authorization policies, the Subversion repositories you make available via the Location directive will be generally accessible to everyone. In other words,
• anyone can use their Subversion client to checkout a working copy of a repository URL (or any of its
subdirectories),
• anyone can interactively browse the repository's latest revision simply by pointing their web browser
to the repository URL, and
• anyone can commit to the repository.
Basic HTTP Authentication
The easiest way to authenticate a client is via the HTTP Basic authentication mechanism, which simply
uses a username and password to verify that a user is who she says she is. Apache provides an htpasswd
utility for managing the list of acceptable usernames and passwords, those to whom you wish to grant
special access to your Subversion repository. Let's grant commit access to Sally and Harry. First, we
need to add them to the password file.
$ ### First time: use -c to create the file
$ ### Use -m to use MD5 encryption of the password, which is more secure
$ htpasswd -cm /etc/svn-auth-file harry
New password: *****
Re-type new password: *****
Adding password for user harry
$ htpasswd -m /etc/svn-auth-file sally
New password: *******
Re-type new password: *******
Adding password for user sally
$
Next, you need to add some more httpd.conf directives inside your Location block to tell Apache
what to do with your new password file. The AuthType directive specifies the type of authentication
system to use. In this case, we want to specify the Basic authentication system. AuthName is an arbitrary name that you give for the authentication domain. Most browsers will display this name in the popup dialog box when the browser is querying the user for his name and password. Finally, use the AuthUserFile directive to specify the location of the password file you created using htpasswd.
After adding these three directives, your <Location> block should look something like this:
<Location /svn>
DAV svn
SVNParentPath /usr/local/svn
AuthType Basic
111
Server Configuration
AuthName "Subversion repository"
AuthUserFile /etc/svn-auth-file
</Location>
This <Location> block is not yet complete, and will not do anything useful. It's merely telling
Apache that whenever authorization is required, Apache should harvest a username and password from
the Subversion client. What's missing here, however, are directives that tell Apache which sorts of client
requests require authorization. Wherever authorization is required, Apache will demand authentication
as well. The simplest thing to do is protect all requests. Adding Require valid-user tells Apache
that all requests require an authenticated user:
<Location /svn>
DAV svn
SVNParentPath /usr/local/svn
AuthType Basic
AuthName "Subversion repository"
AuthUserFile /etc/svn-auth-file
Require valid-user
</Location>
Be sure to read the next section (the section called “Authorization Options”) for more detail on the Require directive and other ways to set authorization policies.
One word of warning: HTTP Basic Auth passwords pass in very nearly plain-text over the network, and
thus are extremely insecure. If you're worried about password snooping, it may be best to use some sort
of SSL encryption, so that clients authenticate via https:// instead of http://; at a bare minimum,
you can configure Apache to use a self-signed server certificate. 5 Consult Apache's documentation (and
OpenSSL documentation) about how to do that.
SSL Certificate Management
Businesses that need to expose their repositories for access outside the company firewall should be conscious of the possibility that unauthorized parties could be “sniffing” their network traffic. SSL makes
that kind of unwanted attention less likely to result in sensitive data leaks.
If a Subversion client is compiled to use OpenSSL, then it gains the ability to speak to an Apache server
via https:// URLs. The Neon library used by the Subversion client is not only able to verify server
certificates, but can also supply client certificates when challenged. When the client and server have exchanged SSL certificates and successfully authenticated one another, all further communication is encrypted via a session key.
It's beyond the scope of this book to describe how to generate client and server certificates, and how to
configure Apache to use them. Many other books, including Apache's own documentation, describe this
task. But what can be covered here is how to manage server and client certificates from an ordinary Subversion client.
When speaking to Apache via https://, a Subversion client can receive two different types of information:
• a server certificate
• a demand for a client certificate
5
While self-signed server certificates are still vulnerable to a “man in the middle” attack, such an attack is still much more difficult
for a casual observer to pull off, compared to sniffing unprotected passwords.
112
Server Configuration
If the client receives a server certificate, it needs to verify that it trusts the certificate: is the server really
who it claims to be? The OpenSSL library does this by examining the signer of the server certificate, or
certifying authority (CA). If OpenSSL is unable to automatically trust the CA, or if some other problem
occurs (such as an expired certificate or hostname mismatch), the Subversion command-line client will
ask you whether you want to trust the server certificate anyway:
$ svn list https://host.example.com/repos/project
Error validating server certificate for 'https://host.example.com:443':
- The certificate is not issued by a trusted authority. Use the
fingerprint to validate the certificate manually!
Certificate information:
- Hostname: host.example.com
- Valid: from Jan 30 19:23:56 2004 GMT until Jan 30 19:23:56 2006 GMT
- Issuer: CA, example.com, Sometown, California, US
- Fingerprint: 7d:e1:a9:34:33:39:ba:6a:e9:a5:c4:22:98:7b:76:5c:92:a0:9c:7b
(R)eject, accept (t)emporarily or accept (p)ermanently?
This dialogue should look familiar; it's essentially the same question you've probably seen coming from
your web browser (which is just another HTTP client like Subversion!). If you choose the (p)ermanent
option, the server certificate will be cached in your private run-time auth/ area in just the same way
your username and password are cached (see the section called “Client Credentials Caching”). If cached,
Subversion will automatically remember to trust this certificate in future negotiations.
Your run-time servers file also gives you the ability to make your Subversion client automatically
trust specific CAs, either globally or on a per-host basis. Simply set the ssl-authority-files
variable to a semicolon-separated list of PEM-encoded CA certificates:
[global]
ssl-authority-files = /path/to/CAcert1.pem;/path/to/CAcert2.pem
Many OpenSSL installations also have a pre-defined set of “default” CAs that are nearly universally
trusted. To make the Subversion client automatically trust these standard authorities, set the ssltrust-default-ca variable to true.
When talking to Apache, a Subversion client might also receive a challenge for a client certificate.
Apache is asking the client to identify itself: is the client really who it says it is? If all goes correctly, the
Subversion client sends back a private certificate signed by a CA that Apache trusts. A client certificate
is usually stored on disk in encrypted format, protected by a local password. When Subversion receives
this challenge, it will ask you for both a path to the certificate and the password which protects it:
$ svn list https://host.example.com/repos/project
Authentication realm: https://host.example.com:443
Client certificate filename: /path/to/my/cert.p12
Passphrase for '/path/to/my/cert.p12': ********
…
Notice that the client certificate is a “p12” file. To use a client certificate with Subversion, it must be in
PKCS#12 format, which is a portable standard. Most web browsers are already able to import and export
certificates in that format. Another option is to use the OpenSSL command-line tools to convert existing
certificates into PKCS#12.
Again, the runtime servers file allows you to automate this challenge on a per-host basis. Either or
113
Server Configuration
both pieces of information can be described in runtime variables:
[groups]
examplehost = host.example.com
[examplehost]
ssl-client-cert-file = /path/to/my/cert.p12
ssl-client-cert-password = somepassword
Once you've set the ssl-client-cert-file and ssl-client-cert-password variables, the
Subversion client can automatically respond to a client certificate challenge without prompting you. 6
Authorization Options
At this point, you've configured authentication, but not authorization. Apache is able to challenge clients
and confirm identities, but it has not been told how to allow or restrict access to the clients bearing those
identities. This section describes two strategies for controlling access to your repositories.
Blanket Access Control
The simplest form of access control is to authorize certain users for either read-only access to a repository, or read/write access to a repository.
You can restrict access on all repository operations by adding the Require valid-user directive to
your <Location> block. Using our previous example, this would mean that only clients that claimed
to be either harry or sally, and provided the correct password for their respective username, would
be allowed to do anything with the Subversion repository:
<Location /svn>
DAV svn
SVNParentPath /usr/local/svn
# how to authenticate a user
AuthType Basic
AuthName "Subversion repository"
AuthUserFile /path/to/users/file
# only authenticated users may access the repository
Require valid-user
</Location>
Sometimes you don't need to run such a tight ship. For example, Subversion's own source code repository at http://svn.collab.net/repos/svn allows anyone in the world to perform read-only repository tasks
(like checking out working copies and browsing the repository with a web browser), but restricts all
write operations to authenticated users. To do this type of selective restriction, you can use the Limit
and LimitExcept configuration directives. Like the Location directive, these blocks have starting
and ending tags, and you would nest them inside your <Location> block.
The parameters present on the Limit and LimitExcept directives are HTTP request types that are
affected by that block. For example, if you wanted to disallow all access to your repository except the
currently supported read-only operations, you would use the LimitExcept directive, passing the GET,
PROPFIND, OPTIONS, and REPORT request type parameters. Then the previously mentioned Require valid-user directive would be placed inside the <LimitExcept> block instead of just
inside the <Location> block.
6
More security-conscious folk might not want to store the client certificate password in the runtime servers file.
114
Server Configuration
<Location /svn>
DAV svn
SVNParentPath /usr/local/svn
# how to authenticate a user
AuthType Basic
AuthName "Subversion repository"
AuthUserFile /path/to/users/file
# For any operations other than these, require an authenticated user.
<LimitExcept GET PROPFIND OPTIONS REPORT>
Require valid-user
</LimitExcept>
</Location>
These are only a few simple examples. For more in-depth information about Apache access control and
the Require directive, take a look at the Security section of the Apache documentation's tutorials
collection at http://httpd.apache.org/docs-2.0/misc/tutorials.html.
Per-Directory Access Control
It's possible to set up finer-grained permissions using a second Apache httpd module, mod_authz_svn.
This module grabs the various opaque URLs passing from client to server, asks mod_dav_svn to decode
them, and then possibly vetoes requests based on access policies defined in a configuration file.
If you've built Subversion from source code, mod_authz_svn is automatically built and installed alongside mod_dav_svn. Many binary distributions install it automatically as well. To verify that it's installed
correctly, make sure it comes right after mod_dav_svn's LoadModule directive in httpd.conf:
LoadModule dav_module
LoadModule dav_svn_module
LoadModule authz_svn_module
modules/mod_dav.so
modules/mod_dav_svn.so
modules/mod_authz_svn.so
To activate this module, you need to configure your Location block to use the AuthzSVNAccessFile directive, which specifies a file containing the permissions policy for paths within your repositories. (In a moment, we'll discuss the format of that file.)
Apache is flexible, so you have the option to configure your block in one of three general patterns. To
begin, choose one of these basic configuration patterns. (The examples below are very simple; look at
Apache's own documentation for much more detail on Apache authentication and authorization options.)
The simplest block is to allow open access to everyone. In this scenario, Apache never sends authentication challenges, so all users are treated as “anonymous”.
Example 6.1. A sample configuration for anonymous access.
<Location /repos>
DAV svn
SVNParentPath /usr/local/svn
# our access control policy
AuthzSVNAccessFile /path/to/access/file
</Location>
115
Server Configuration
On the opposite end of the paranoia scale, you can configure your block to demand authentication from
everyone. All clients must supply credentials to identify themselves. Your block unconditionally requires authentication via the Require valid-user directive, and defines a means to authenticate.
Example 6.2. A sample configuration for authenticated access.
<Location /repos>
DAV svn
SVNParentPath /usr/local/svn
# our access control policy
AuthzSVNAccessFile /path/to/access/file
# only authenticated users may access the repository
Require valid-user
# how to authenticate a user
AuthType Basic
AuthName "Subversion repository"
AuthUserFile /path/to/users/file
</Location>
A third very popular pattern is to allow a combination of authenticated and anonymous access. For example, many administrators want to allow anonymous users to read certain repository directories, but
want only authenticated users to read (or write) more sensitive areas. In this setup, all users start out accessing the repository anonymously. If your access control policy demands a real username at any point,
Apache will demand authentication from the client. To do this, you use both the Satisfy Any and
Require valid-user directives together.
Example 6.3. A sample configuration for mixed authenticated/anonymous access.
<Location /repos>
DAV svn
SVNParentPath /usr/local/svn
# our access control policy
AuthzSVNAccessFile /path/to/access/file
# try anonymous access first, resort to real
# authentication if necessary.
Satisfy Any
Require valid-user
# how to authenticate a user
AuthType Basic
AuthName "Subversion repository"
AuthUserFile /path/to/users/file
</Location>
Once your basic Location block is configured, you can create an access file and define some author116
Server Configuration
ization rules in it.
The syntax of the access file is the same familiar one used by svnserve.conf and the runtime configuration files. Lines that start with a hash (#) are ignored. In its simplest form, each section names a repository and path within it, and the authenticated usernames are the option names within each section. The
value of each option describes the user's level of access to the repository path: either r (read-only) or rw
(read-write). If the user is not mentioned at all, no access is allowed.
To be more specific: the value of the section-names are either of the form [repos-name:path] or
the form [path]. If you're using the SVNParentPath directive, then it's important to specify the repository names in your sections. If you omit them, then a section like [/some/dir] will match the
path /some/dir in every repository. If you're using the SVNPath directive, however, then it's fine to
only define paths in your sections—after all, there's only one repository.
[calc:/branches/calc/bug-142]
harry = rw
sally = r
In this first example, the user harry has full read and write access on the /
branches/calc/bug-142 directory in the calc repository, but the user sally has read-only access. Any other users are blocked from accessing this directory.
Of course, permissions are inherited from parent to child directory. That means that we can specify a
subdirectory with a different access policy for Sally:
[calc:/branches/calc/bug-142]
harry = rw
sally = r
# give sally write access only to the 'testing' subdir
[calc:/branches/calc/bug-142/testing]
sally = rw
Now Sally can write to the testing subdirectory of the branch, but can still only read other parts.
Harry, meanwhile, continues to have complete read-write access to the whole branch.
It's also possible to explicitly deny permission to someone via inheritance rules, by setting the username
variable to nothing:
[calc:/branches/calc/bug-142]
harry = rw
sally = r
[calc:/branches/calc/bug-142/secret]
harry =
In this example, Harry has read-write access to the entire bug-142 tree, but has absolutely no access at
all to the secret subdirectory within it.
The thing to remember is that the most specific path always matches first. The mod_authz_svn module
tries to match the path itself, and then the parent of the path, then the parent of that, and so on. The net
effect is that mentioning a specific path in the accessfile will always override any permissions inherited
from parent directories.
By default, nobody has any access to the repository at all. That means that if you're starting with an
empty file, you'll probably want to give at least read permission to all users at the root of the repository.
117
Server Configuration
You can do this by using the asterisk variable (*), which means “all users”:
[/]
* = r
This is a common setup; notice that there's no repository name mentioned in the section name. This
makes all repositories world readable to all users, whether you're using SVNPath or
SVNParentPath. Once all users have read-access to the repositories, you can give explicit rw permission to certain users on specific subdirectories within specific repositories.
The asterisk variable (*) is also worth special mention here: it's the only pattern which matches an anonymous user. If you've configured your Location block to allow a mixture of anonymous and authenticated access, all users start out accessing Apache anonymously. mod_authz_svn looks for a *
value defined for the path being accessed; if it can't find one, then Apache demands real authentication
from the client.
The access file also allows you to define whole groups of users, much like the Unix /etc/group file:
[groups]
calc-developers = harry, sally, joe
paint-developers = frank, sally, jane
everyone = harry, sally, joe, frank, sally, jane
Groups can be granted access control just like users. Distinguish them with an “at” (@) prefix:
[calc:/projects/calc]
@calc-developers = rw
[paint:/projects/paint]
@paint-developers = rw
jane = r
Groups can also be defined to contain other groups:
[groups]
calc-developers = harry, sally, joe
paint-developers = frank, sally, jane
everyone = @calc-developers, @paint-developers
…and that's pretty much all there is to it.
Disabling Path-based Checks
The mod_dav_svn module goes through a lot of work to make sure that data you've marked
“unreadable” doesn't get accidentally leaked. This means that it needs to closely monitor all of the paths
and file-contents returned by commands like svn checkout or svn update commands. If these commands encounter a path that isn't readable according to some authorization policy, then the path is typically omitted altogether. In the case of history or rename tracing—e.g. running a command like svn cat -r
OLD foo.c on a file that was renamed long ago—the rename tracking will simply halt if one of the object's former names is determined to be read-restricted.
All of this path-checking can sometimes be quite expensive, especially in the case of svn log. When retrieving a list revisions, the server looks at every changed path in each revision and checks it for readab118
Server Configuration
ility. If an unreadable path is discovered, then it's omitted from the list of the revision's changed paths
(normally seen with the --verbose option), and the whole log message is suppressed. Needless to
say, this can be time-consuming on revisions that affect a large number of files. This is the cost of security: even if you haven't configured a module like mod_authz_svn at all, the mod_dav_svn module is
still asking Apache httpd to run authorization checks on every path. The mod_dav_svn module has no
idea what authorization modules have been installed, so all it can do is ask Apache to invoke whatever
might be present.
On the other hand, there's also an escape-hatch of sorts, one which allows you to trade security features
for speed. If you're not enforcing any sort of per-directory authorization (i.e. not using mod_authz_svn
or similar module), then you can disable all of this path-checking. In your httpd.conf file, use the
SVNPathAuthz directive:
Example 6.4. Disabling path checks altogether
<Location /repos>
DAV svn
SVNParentPath /usr/local/svn
SVNPathAuthz off
</Location>
The SVNPathAuthz directive is “on” by default. When set “off”, all path-based authorization checking is disabled; mod_dav_svn stops invoking authorization checks on every path it discovers.
Extra Goodies
We've covered most of the authentication and authorization options for Apache and mod_dav_svn. But
there are a few other nice features that Apache provides.
Repository Browsing
One of the most useful benefits of an Apache/WebDAV configuration for your Subversion repository is
that the youngest revisions of your versioned files and directories are immediately available for viewing
via a regular web browser. Since Subversion uses URLs to identify versioned resources, those URLs
used for HTTP-based repository access can be typed directly into a Web browser. Your browser will issue a GET request for that URL, and based on whether that URL represents a versioned directory or file,
mod_dav_svn will respond with a directory listing or with file contents.
Since the URLs do not contain any information about which version of the resource you wish to see,
mod_dav_svn will always answer with the youngest version. This functionality has the wonderful sideeffect that you can pass around Subversion URLs to your peers as references to documents, and those
URLs will always point at the latest manifestation of that document. Of course, you can even use the
URLs as hyperlinks from other web sites, too.
You generally will get more use out of URLs to versioned files—after all, that's where the interesting
content tends to lie. But you might have occasion to browse a Subversion directory listing, where you'll
quickly note that the generated HTML used to display that listing is very basic, and certainly not intended to be aesthetically pleasing (or even interesting). To enable customization of these directory displays, Subversion provides an XML index feature. A single SVNIndexXSLT directive in your repository's Location block of httpd.conf will instruct mod_dav_svn to generate XML output when displaying a directory listing, and to reference the XSLT stylesheet of your choice:
119
Server Configuration
<Location /svn>
DAV svn
SVNParentPath /usr/local/svn
SVNIndexXSLT "/svnindex.xsl"
…
</Location>
Using the SVNIndexXSLT directive and a creative XSLT stylesheet, you can make your directory listings match the color schemes and imagery used in other parts of your website. Or, if you'd prefer, you
can use the sample stylesheets provided in the Subversion source distribution's tools/xslt/ directory. Keep in mind that the path provided to the SVNIndexXSLT directory is actually a URL
path—browsers need to be able to read your stylesheets in order to make use of them!
Can I view older revisions?
With an ordinary web browser? In one word: nope. At least, not with mod_dav_svn as your only
tool.
Your web browser only speaks ordinary HTTP. That means it only knows how to GET public
URLs, which represent the latest versions of files and directories. According to the WebDAV/
DeltaV spec, each server defines a private URL syntax for older versions of resources, and that
syntax is opaque to clients. To find an older version of a file, a client must follow a specific procedure to “discover” the proper URL; the procedure involves issuing a series of WebDAV
PROPFIND requests and understanding DeltaV concepts. This is something your web browser
simply can't do.
So to answer the question, one obvious way to see older revisions of files and directories is by
passing the --revision argument to the svn list and svn cat commands. To browse old revisions with your web browser, however, you can use third-party software. A good example of this
is ViewVC (http://viewvc.tigris.org/). ViewVC was originally written to display CVS repositories
through the web, 7 and the latest bleeding-edge versions (at the time of writing) are able to understand Subversion repositories as well.
Other Features
Several of the features already provided by Apache in its role as a robust Web server can be leveraged
for increased functionality or security in Subversion as well. Subversion communicates with Apache using Neon, which is a generic HTTP/WebDAV library with support for such mechanisms as SSL (the Secure Socket Layer, discussed earlier) and Deflate compression (the same algorithm used by the gzip and
PKZIP programs to “shrink” files into smaller chunks of data). You need only to compile support for
the features you desire into Subversion and Apache, and properly configure the programs to use those
features.
Deflate compression places a small burden on the client and server to compress and decompress network
transmissions as a way to minimize the size of the actual transmission. In cases where network bandwidth is in short supply, this kind of compression can greatly increase the speed at which communications between server and client can be sent. In extreme cases, this minimized network transmission
could be the difference between an operation timing out or completing successfully.
Less interesting, but equally useful, are other features of the Apache and Subversion relationship, such
as the ability to specify a custom port (instead of the default HTTP port 80) or a virtual domain name by
which the Subversion repository should be accessed, or the ability to access the repository through a
proxy. These things are all supported by Neon, so Subversion gets that support for free.
7
Back then, it was called “ViewCVS”.
120
Server Configuration
Finally, because mod_dav_svn is speaking a semi-complete dialect of WebDAV/DeltaV, it's possible to
access the repository via third-party DAV clients. Most modern operating systems (Win32, OS X, and
Linux) have the built-in ability to mount a DAV server as a standard network “share”. This is a complicated topic; for details, read Appendix B, WebDAV and Autoversioning.
Supporting Multiple Repository Access Methods
You've seen how a repository can be accessed in many different ways. But is it possible—or safe—for
your repository to be accessed by multiple methods simultaneously? The answer is yes, provided you
use a bit of foresight.
At any given time, these processes may require read and write access to your repository:
• regular system users using a Subversion client (as themselves) to access the repository directly via
file:/// URLs;
• regular system users connecting to SSH-spawned private svnserve processes (running as themselves)
which access the repository;
• an svnserve process—either a daemon or one launched by inetd—running as a particular fixed user;
• an Apache httpd process, running as a particular fixed user.
The most common problem administrators run into is repository ownership and permissions. Does every
process (or user) in the previous list have the rights to read and write the Berkeley DB files? Assuming
you have a Unix-like operating system, a straightforward approach might be to place every potential repository user into a new svn group, and make the repository wholly owned by that group. But even
that's not enough, because a process may write to the database files using an unfriendly umask—one that
prevents access by other users.
So the next step beyond setting up a common group for repository users is to force every repository-accessing process to use a sane umask. For users accessing the repository directly, you can make the svn
program into a wrapper script that first sets umask 002 and then runs the real svn client program. You
can write a similar wrapper script for the svnserve program, and add a umask 002 command to
Apache's own startup script, apachectl. For example:
$ cat /usr/bin/svn
#!/bin/sh
umask 002
/usr/bin/svn-real "$@"
Another common problem is often encountered on Unix-like systems. As a repository is used, Berkeley
DB occasionally creates new log files to journal its actions. Even if the repository is wholly owned by
the svn group, these newly created files won't necessarily be owned by that same group, which then creates more permissions problems for your users. A good workaround is to set the group SUID bit on the
repository's db directory. This causes all newly-created log files to have the same group owner as the
parent directory.
Once you've jumped through these hoops, your repository should be accessible by all the necessary pro121
Server Configuration
cesses. It may seem a bit messy and complicated, but the problems of having multiple users sharing
write-access to common files are classic ones that are not often elegantly solved.
Fortunately, most repository administrators will never need to have such a complex configuration. Users
who wish to access repositories that live on the same machine are not limited to using file:// access
URLs—they can typically contact the Apache HTTP server or svnserve using localhost for the
server name in their http:// or svn:// URLs. And to maintain multiple server processes for your
Subversion repositories is likely to be more of a headache than necessary. We recommend you choose
the server that best meets your needs and stick with it!
The svn+ssh:// server checklist
It can be quite tricky to get a bunch of users with existing SSH accounts to share a repository
without permissions problems. If you're confused about all the things that you (as an administrator) need to do on a Unix-like system, here's a quick checklist that resummarizes some of things
discussed in this section:
• All of your SSH users need to be able to read and write to the repository. Put all the SSH users
into a single group. Make the repository wholly owned by that group, and set the group permissions to read/write.
• Your users need to use a sane umask when accessing the repository. Make sure that svnserve
(/usr/bin/svnserve, or wherever it lives in $PATH) is actually a wrapper script which
sets umask 002 and executes the real svnserve binary. Take similar measures when using svnlook and svnadmin. Either run them with a sane umask, or wrap them as described above.
122
Chapter 7. Advanced Topics
If you've been reading this book chapter by chapter, from start to finish, you should by now have acquired enough knowledge to use the Subversion client to perform the most common version control operations. You understand how to checkout a working copy from a Subversion repository. You are comfortable with submitting and receiving changes using the svn commit and svn update functions. You've
probably even developed a reflex which causes you to run the svn status command almost unconsciously. For all intents and purposes, you are ready to use Subversion in a typical environment.
But the Subversion feature set doesn't stop at “common version control operations”.
This chapter highlights some of Subversion's features that aren't quite so regularly used. In it, we will
discuss Subversion's property (or “metadata”) support, and how to modify Subversion's default behaviors by tweaking its run-time configuration area. We will describe how you can use externals definitions
to instruct Subversion to pull data from multiple repositories. We'll cover in detail some of the additional
client- and server-side tools that are part of the Subversion distribution.
Before reading this chapter, you should be familiar with the basic file and directory versioning capabilities of Subversion. If you haven't already read about those, or if you need a refresher, we recommend that
you check out Chapter 2, Basic Concepts and Chapter 3, Guided Tour. Once you've mastered the basics
and consumed this chapter, you'll be a Subversion power-user!
Runtime Configuration Area
Subversion provides many optional behaviors that can be controlled by the user. Many of these options
are of the kind that a user would wish to apply to all Subversion operations. So, rather than forcing users
to remember command-line arguments for specifying these options, and to use them for each and every
operation they perform, Subversion uses configuration files, segregated into a Subversion configuration
area.
The Subversion configuration area is a two-tiered hierarchy of option names and their values. Usually,
this boils down to a special directory that contains configuration files (the first tier), which are just text
files in standard INI format (with “sections” providing the second tier). These files can be easily edited
using your favorite text editor (such as Emacs or vi), and contain directives read by the client to determine which of several optional behaviors the user prefers.
Configuration Area Layout
The first time that the svn command-line client is executed, it creates a per-user configuration area. On
Unix-like systems, this area appears as a directory named .subversion in the user's home directory.
On Win32 systems, Subversion creates a folder named Subversion, typically inside the Application Data area of the user's profile directory (which, by the way, is usually a hidden directory).
However, on this platform the exact location differs from system to system, and is dictated by the Windows registry. 1 We will refer to the per-user configuration area using its Unix name, .subversion.
In addition to the per-user configuration area, Subversion also recognizes the existence of a system-wide
configuration area. This gives system administrators the ability to establish defaults for all users on a
given machine. Note that the system-wide configuration area does not alone dictate mandatory
policy—the settings in the per-user configuration area override those in the system-wide one, and command-line arguments supplied to the svn program have the final word on behavior. On Unix-like platforms, the system-wide configuration area is expected to be the /etc/subversion directory; on
Windows machines, it looks for a Subversion directory inside the common Application Data
1
The APPDATA environment variable points to the Application Data area, so you can always refer to this folder as
%APPDATA%\Subversion.
123
Advanced Topics
location (again, as specified by the Windows Registry). Unlike the per-user case, the svn program does
not attempt to create the system-wide configuration area.
The configuration area currently contains three files—two configuration files (config and servers),
and a README.txt file which describes the INI format. At the time of their creation, the files contain
default values for each of the supported Subversion options, mostly commented out and grouped with
textual descriptions about how the values for the key affect Subversion's behavior. To change a certain
behavior, you need only to load the appropriate configuration file into a text editor, and modify the desired option's value. If at any time you wish to have the default configuration settings restored, you can
simply remove (or rename) your configuration directory and then run some innocuous svn command,
such as svn --version. A new configuration directory with the default contents will be created.
The per-user configuration area also contains a cache of authentication data. The auth directory holds a
set of subdirectories that contain pieces of cached information used by Subversion's various supported
authentication methods. This directory is created in such a way that only the user herself has permission
to read its contents.
Configuration and the Windows Registry
In addition to the usual INI-based configuration area, Subversion clients running on Windows platforms
may also use the Windows registry to hold the configuration data. The option names and their values are
the same as in the INI files. The “file/section” hierarchy is preserved as well, though addressed in a
slightly different fashion—in this schema, files and sections are just levels in the registry key tree.
Subversion
looks
for
system-wide
configuration
values
under
the
HKEY_LOCAL_MACHINE\Software\Tigris.org\Subversion key. For example, the global-ignores option, which is in the miscellany section of the config file, would be found at
HKEY_LOCAL_MACHINE\Software\Tigris.org\Subversion\Config\Miscellany\gl
obal-ignores.
Per-user
configuration
values
should
be
stored
under
HKEY_CURRENT_USER\Software\Tigris.org\Subversion.
Registry-based configuration options are parsed before their file-based counterparts, so are overridden
by values found in the configuration files. In other words, configuration priority is granted in the following order on a Windows system:
1. Command-line options
2. The per-user INI files
3. The per-user Registry values
4. The system-wide INI files
5. The system-wide Registry values
Also, the Windows Registry doesn't really support the notion of something being “commented out”.
However, Subversion will ignore any option key whose name begins with a hash (#) character. This allows you to effectively comment out a Subversion option without deleting the entire key from the Registry, obviously simplifying the process of restoring that option.
The svn command-line client never attempts to write to the Windows Registry, and will not attempt to
create a default configuration area there. You can create the keys you need using the REGEDIT program. Alternatively, you can create a .reg file, and then double-click on that file from the Explorer
shell, which will cause the data to be merged into your registry.
Example 7.1. Sample Registration Entries (.reg) File.
124
Advanced Topics
REGEDIT4
[HKEY_LOCAL_MACHINE\Software\Tigris.org\Subversion\Servers\groups]
[HKEY_LOCAL_MACHINE\Software\Tigris.org\Subversion\Servers\global]
"#http-proxy-host"=""
"#http-proxy-port"=""
"#http-proxy-username"=""
"#http-proxy-password"=""
"#http-proxy-exceptions"=""
"#http-timeout"="0"
"#http-compression"="yes"
"#neon-debug-mask"=""
"#ssl-authority-files"=""
"#ssl-trust-default-ca"=""
"#ssl-client-cert-file"=""
"#ssl-client-cert-password"=""
[HKEY_CURRENT_USER\Software\Tigris.org\Subversion\Config\auth]
"#store-auth-creds"="no"
[HKEY_CURRENT_USER\Software\Tigris.org\Subversion\Config\helpers]
"#editor-cmd"="notepad"
"#diff-cmd"=""
"#diff3-cmd"=""
"#diff3-has-program-arg"=""
[HKEY_CURRENT_USER\Software\Tigris.org\Subversion\Config\miscellany]
"#global-ignores"="*.o *.lo *.la #*# .*.rej *.rej .*~ *~ .#* .DS_Store"
"#log-encoding"=""
"#use-commit-times"=""
"#template-root"=""
"#enable-auto-props"=""
[HKEY_CURRENT_USER\Software\Tigris.org\Subversion\Config\tunnels]
[HKEY_CURRENT_USER\Software\Tigris.org\Subversion\Config\auto-props]
The previous example shows the contents of a .reg file which contains some of the most commonly
used configuration options and their default values. Note the presence of both system-wide (for network
proxy-related options) and per-user settings (editor programs and password storage, among others). Also
note that all the options are effectively commented out. You need only to remove the hash (#) character
from the beginning of the option names, and set the values as you desire.
Configuration Options
In this section, we will discuss the specific run-time configuration options that are currently supported
by Subversion.
Servers
The servers file contains Subversion configuration options related to the network layers. There are
two special section names in this file—groups and global. The groups section is essentially a
cross-reference table. The keys in this section are the names of other sections in the file; their values are
globs—textual tokens which possibly contain wildcard characters—that are compared against the hostnames of the machine to which Subversion requests are sent.
125
Advanced Topics
[groups]
beanie-babies = *.red-bean.com
collabnet = svn.collab.net
[beanie-babies]
…
[collabnet]
…
When Subversion is used over a network, it attempts to match the name of the server it is trying to reach
with a group name under the groups section. If a match is made, Subversion then looks for a section in
the servers file whose name is the matched group's name. From that section it reads the actual network configuration settings.
The global section contains the settings that are meant for all of the servers not matched by one of the
globs under the groups section. The options available in this section are exactly the same as those valid for the other server sections in the file (except, of course, the special groups section), and are as follows:
http-proxy-host
This specifies the hostname of the proxy computer through which your HTTP-based Subversion requests must pass. It defaults to an empty value, which means that Subversion will not attempt to
route HTTP requests through a proxy computer, and will instead attempt to contact the destination
machine directly.
http-proxy-port
This specifies the port number on the proxy host to use. It defaults to an empty value.
http-proxy-username
This specifies the username to supply to the proxy machine. It defaults to an empty value.
http-proxy-password
This specifies the password to supply to the proxy machine. It defaults to an empty value.
http-timeout
This specifies the amount of time, in seconds, to wait for a server response. If you experience problems with a slow network connection causing Subversion operations to timeout, you should increase
the value of this option. The default value is 0, which instructs the underlying HTTP library, Neon,
to use its default timeout setting.
http-compression
This specifies whether or not Subversion should attempt to compress network requests made to
DAV-ready servers. The default value is yes (though compression will only occur if that capability
is compiled into the network layer). Set this to no to disable compression, such as when debugging
network transmissions.
neon-debug-mask
This is an integer mask that the underlying HTTP library, Neon, uses for choosing what type of debugging output to yield. The default value is 0, which will silence all debugging output. For more
information about how Subversion makes use of Neon, see Chapter 8, Developer Information.
ssl-authority-files
This is a semicolon-delimited list of paths to files containing certificates of the certificate authorities
(or CAs) that are accepted by the Subversion client when accessing the repository over HTTPS.
ssl-trust-default-ca
Set this variable to yes if you want Subversion to automatically trust the set of default CAs that
126
Advanced Topics
ship with OpenSSL.
ssl-client-cert-file
If a host (or set of hosts) requires an SSL client certificate, you'll normally be prompted for a path to
your certificate. By setting this variable to that same path, Subversion will be able to find your client certificate automatically without prompting you. There's no standard place to store your certificate on disk; Subversion will grab it from any path you specify.
ssl-client-cert-password
If your SSL client certificate file is encrypted by a passphrase, Subversion will prompt you for the
passphrase whenever the certificate is used. If you find this annoying (and don't mind storing the
password in the servers file), then you can set this variable to the certificate's passphrase. You
won't be prompted anymore.
Config
The config file contains the rest of the currently available Subversion run-time options, those not related to networking. There are only a few options in use at this time, but they are again grouped into sections in expectation of future additions.
The auth section contains settings related to Subversion's authentication and authorization against the
repository. It contains:
store-passwords
This instructs Subversion to cache, or not to cache, passwords that are supplied by the user in response to server authentication challenges. The default value is yes. Set this to no to disable this
on-disk password caching. You can override this option for a single instance of the svn command
using the --no-auth-cache command-line parameter (for those subcommands that support it).
For more information, see the section called “Client Credentials Caching”.
store-auth-creds
This setting is the same as store-passwords, except that it enables or disables disk-caching of
all authentication information: usernames, passwords, server certificates, and any other types of
cacheable credentials.
The helpers section controls which external applications Subversion uses to accomplish its tasks.
Valid options in this section are:
editor-cmd
This specifies the program Subversion will use to query the user for a log message during a commit
operation, such as when using svn commit without either the --message (-m) or --file (-F)
options. This program is also used with the svn propedit command—a temporary file is populated
with the current value of the property the user wishes to edit, and the edits take place right in the editor program (see the section called “Properties”). This option's default value is empty. The order of
priority for determining the editor command is:
1. Command-line option --editor-cmd
2. Environment variable SVN_EDITOR
3. Configuration option editor-cmd
4. Environment variable VISUAL
5. Environment variable EDITOR
127
Advanced Topics
6. Possibly, a default value built in to Subversion (not present in the official builds)
The value of any of these options or variables is (unlike diff-cmd) the beginning of a command
line to be executed by the shell. Subversion appends a space and the pathname of the temporary file
to be edited. The editor should modify the temporary file and return a zero exit code to indicate success.
diff-cmd
This specifies the absolute path of a differencing program, used when Subversion generates “diff”
output (such as when using the svn diff command). By default Subversion uses an internal differencing library—setting this option will cause it to perform this task using an external program. See the
section called “Using External Differencing Tools” for more details on using such programs.
diff3-cmd
This specifies the absolute path of a three-way differencing program. Subversion uses this program
to merge changes made by the user with those received from the repository. By default Subversion
uses an internal differencing library—setting this option will cause it to perform this task using an
external program. See the section called “Using External Differencing Tools” for more details on
using such programs.
diff3-has-program-arg
This flag should be set to true if the program specified by the diff3-cmd option accepts a -diff-program command-line parameter.
The tunnels section allows you to define new tunnel schemes for use with svnserve and svn:// client connections. For more details, see the section called “SSH authentication and authorization”.
The miscellany section is where everything that doesn't belong elsewhere winds up. 2 In this section,
you can find:
global-ignores
When running the svn status command, Subversion lists unversioned files and directories along
with the versioned ones, annotating them with a ? character (see the section called “svn status”).
Sometimes, it can be annoying to see uninteresting, unversioned items—for example, object files
that result from a program's compilation—in this display. The global-ignores option is a list
of whitespace-delimited globs which describe the names of files and directories that Subversion
should not display unless they are versioned. The default value is *.o *.lo *.la #*#
.*.rej *.rej .*~ *~ .#* .DS_Store.
As well as svn status, the svn add and svn import commands also ignore files that match the list
when they are scanning a directory. You can override this behaviour for a single instance of any of
these commands by explicitly specifying the file name, or by using the --no-ignore commandline flag.
For information on more fine-grained control of ignored items, see the section called
“svn:ignore”.
enable-auto-props
This instructs Subversion to automatically set properties on newly added or imported files. The default value is no, so set this to yes to enable Auto-props. The auto-props section of this file
specifies which properties are to be set on which files.
log-encoding
This variable sets the default character set encoding for commit log messages. It's a permanent form
of the --encoding option (see the section called “svn Switches”). The Subversion repository
2
Anyone for potluck dinner?
128
Advanced Topics
stores log messages in UTF-8, and assumes that your log message is written using your operating
system's native locale. You should specify a different encoding if your commit messages are written
in any other encoding.
use-commit-times
Normally your working copy files have timestamps that reflect the last time they were touched by
any process, whether that be your own editor or by some svn subcommand. This is generally convenient for people developing software, because build systems often look at timestamps as a way of
deciding which files need to be recompiled.
In other situations, however, it's sometimes nice for the working copy files to have timestamps that
reflect the last time they were changed in the repository. The svn export command always places
these “last-commit timestamps” on trees that it produces. By setting this config variable to yes, the
svn checkout, svn update, svn switch, and svn revert commands will also set last-commit
timestamps on files that they touch.
The auto-props section controls the Subversion client's ability to automatically set properties on files
when they are added or imported. It contains any number of key-value pairs in the format PATTERN =
PROPNAME=PROPVALUE where PATTERN is a file pattern that matches a set of filenames and the rest
of the line is the property and its value. Multiple matches on a file will result in multiple propsets for
that file; however, there is no guarantee that auto-props will be applied in the order in which they are listed in the config file, so you can't have one rule “override” another. You can find several examples of
auto-props usage in the config file. Lastly, don't forget to set enable-auto-props to yes in the
miscellany section if you want to enable auto-props.
Properties
We've already covered in detail how Subversion stores and retrieves various versions of files and directories in its repository. Whole chapters have been devoted to this most fundamental piece of functionality
provided by the tool. And if the versioning support stopped there, Subversion would still be complete
from a version control perspective. But it doesn't stop there.
In addition to versioning your directories and files, Subversion provides interfaces for adding, modifying, and removing versioned metadata on each of your versioned directories and files. We refer to this
metadata as properties, and they can be thought of as two-column tables that map property names to arbitrary values attached to each item in your working copy. Generally speaking, the names and values of
the properties can be whatever you want them to be, with the constraint that the names must be humanreadable text. And the best part about these properties is that they, too, are versioned, just like the textual
contents of your files. You can modify, commit, and revert property changes as easily as committing
textual changes. And you receive other people's property changes as you update your working copy.
Other Properties in Subversion
Properties show up elsewhere in Subversion, too. Just as files and directories may have arbitrary
property names and values attached to them, each revision as a whole may have arbitrary properties attached to it. The same constraints apply—human-readable, text names and anythingyou-want, binary values—except that revision properties are not versioned. See the section called
“Unversioned Properties” for more information on these unversioned properties.
In this section, we will examine the utility—both to users of Subversion, and to Subversion itself—of
property support. You'll learn about the property-related svn subcommands, and how property modifications affect your normal Subversion workflow. Hopefully, you'll be convinced that Subversion properties can enhance your version control experience.
129
Advanced Topics
Why Properties?
Properties can be very useful additions to your working copy. In fact, Subversion itself uses properties to
house special information, and as a way to denote that certain special processing might be needed. Likewise, you can use properties for your own purposes. Of course, anything you can do with properties you
could also do using regular versioned files, but consider the following example of Subversion property
use.
Say you wish to design a website that houses many digital photos, and displays them with captions and a
datestamp. Now, your set of photos is constantly changing, so you'd like to have as much of this site
automated as possible. These photos can be quite large, so as is common with sites of this nature, you
want to provide smaller thumbnail images to your site visitors. You can do this with traditional files.
That is, you can have your image123.jpg and an image123-thumbnail.jpg side-by-side in a
directory. Or if you want to keep the filenames the same, you might have your thumbnails in a different
directory, like thumbnails/image123.jpg. You can also store your captions and datestamps in a
similar fashion, again separated from the original image file. Soon, your tree of files is a mess, and
grows in multiples with each new photo added to the site.
Now consider the same setup using Subversion's file properties. Imagine having a single image file, image123.jpg, and then properties set on that file named caption, datestamp, and even thumbnail. Now your working copy directory looks much more manageable—in fact, it looks like there are
nothing but image files in it. But your automation scripts know better. They know that they can use svn
(or better yet, they can use the Subversion language bindings—see the section called “Using Languages
Other than C and C++”) to dig out the extra information that your site needs to display without having to
read an index file or play path manipulation games.
How (and if) you use Subversion properties is up to you. As we mentioned, Subversion has it own uses
for properties, which we'll discuss a little later in this chapter. But first, let's discuss how to manipulate
properties using the svn program.
Manipulating Properties
The svn command affords a few ways to add or modify file and directory properties. For properties with
short, human-readable values, perhaps the simplest way to add a new property is to specify the property
name and value on the command-line of the propset subcommand.
$ svn propset copyright '(c) 2003 Red-Bean Software' calc/button.c
property 'copyright' set on 'calc/button.c'
$
But we've been touting the flexibility that Subversion offers for your property values. And if you are
planning to have a multi-line textual, or even binary, property value, you probably do not want to supply
that value on the command-line. So the propset subcommand takes a --file (-F) option for specifying the name of a file which contains the new property value.
$ svn propset license -F /path/to/LICENSE calc/button.c
property 'license' set on 'calc/button.c'
$
There are some restrictions on the names you can use for properties. A property name must start with a
letter, a colon (:), or an underscore (_); after that, you can also use digits, hyphens (-), and periods (.).
3
3
If you're familiar with XML, this is pretty much the ASCII subset of the syntax for XML "Name".
130
Advanced Topics
In addition to the propset command, the svn program supplies the propedit command. This command
uses the configured editor program (see the section called “Config”) to add or modify properties. When
you run the command, svn invokes your editor program on a temporary file that contains the current
value of the property (or which is empty, if you are adding a new property). Then, you just modify that
value in your editor program until it represents the new value you wish to store for the property, save the
temporary file, and then exit the editor program. If Subversion detects that you've actually changed the
existing value of the property, it will accept that as the new property value. If you exit your editor
without making any changes, no property modification will occur.
$ svn propedit copyright calc/button.c ### exit the editor without changes
No changes to property 'copyright' on 'calc/button.c'
$
We should note that, as with other svn subcommands, those related to properties can act on multiple
paths at once. This enables you to modify properties on whole sets of files with a single command. For
example, we could have done:
$ svn propset copyright '(c) 2002 Red-Bean Software' calc/*
property 'copyright' set on 'calc/Makefile'
property 'copyright' set on 'calc/button.c'
property 'copyright' set on 'calc/integer.c'
…
$
All of this property adding and editing isn't really very useful if you can't easily get the stored property
value. So the svn program supplies two subcommands for displaying the names and values of properties
stored on files and directories. The svn proplist command will list the names of properties that exist on
a path. Once you know the names of the properties on the node, you can request their values individually
using svn propget. This command will, given a path (or set of paths) and a property name, print the
value of the property to the standard output stream.
$ svn proplist calc/button.c
Properties on 'calc/button.c':
copyright
license
$ svn propget copyright calc/button.c
(c) 2003 Red-Bean Software
There's even a variation of the proplist command that will list both the name and value of all of the
properties. Simply supply the --verbose (-v) option.
$ svn proplist --verbose calc/button.c
Properties on 'calc/button.c':
copyright : (c) 2003 Red-Bean Software
license : ================================================================
Copyright (c) 2003 Red-Bean Software. All rights reserved.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions
are met:
1. Redistributions of source code must retain the above copyright
notice, this list of conditions, and the recipe for Fitz's famous
red-beans-and-rice.
…
131
Advanced Topics
The last property-related subcommand is propdel. Since Subversion allows you to store properties with
empty values, you can't remove a property altogether using propedit or propset. For example, this command will not yield the desired effect:
$ svn propset license '' calc/button.c
property 'license' set on 'calc/button.c'
$ svn proplist --verbose calc/button.c
Properties on 'calc/button.c':
copyright : (c) 2003 Red-Bean Software
license :
$
You need to use the propdel command to delete properties altogether. The syntax is similar to the other
property commands:
$ svn propdel license calc/button.c
property 'license' deleted from 'calc/button.c'.
$ svn proplist --verbose calc/button.c
Properties on 'calc/button.c':
copyright : (c) 2003 Red-Bean Software
$
Now that you are familiar with all of the property-related svn subcommands, let's see how property
modifications affect the usual Subversion workflow. As we mentioned earlier, file and directory properties are versioned, just like your file contents. As a result, Subversion provides the same opportunities
for merging—in cleanly or conflicting fashions—someone else's modifications into your own.
Modifying Revision Properties
Remember those unversioned revision properties? You can modify those, too, with the svn program. Simply add the --revprop command-line parameter, and specify the revision whose
property you wish to modify. Since revisions are global, you don't need to specify a path in this
case as long as you are positioned in the working copy of the repository whose revision property
you wish to modify. For example, you might want to replace the commit log message of an existing revision. 4
$ svn propset svn:log '* button.c: Fix a compiler warning.' -r11 --revprop
property 'svn:log' set on repository revision '11'
$
Note that the ability to modify these unversioned properties must be explicitly added by the repository administrator (see the section called “Hook Scripts”). Since the properties aren't versioned,
you run the risk of losing information if you aren't careful with your edits. The repository administrator can setup methods to protect against this loss, and by default, modification of unversioned
properties is disabled.
And as with file contents, your property changes are local modifications, only made permanent when
you commit them to the repository with svn commit. Your property changes can be easily unmade,
4
Fixing spelling errors, grammatical gotchas, and “just-plain-wrongness” in commit log messages is perhaps the most common
use case for the --revprop option.
132
Advanced Topics
too—the svn revert command will restore your files and directories to their un-edited states, contents,
properties, and all. Also, you can receive interesting information about the state of your file and directory properties by using the svn status and svn diff commands.
$ svn status calc/button.c
M
calc/button.c
$ svn diff calc/button.c
Property changes on: calc/button.c
___________________________________________________________________
Name: copyright
+ (c) 2003 Red-Bean Software
$
Notice how the status subcommand displays M in the second column instead of the first. That is because
we have modified the properties on calc/button.c, but not modified its textual contents. Had we
changed both, we would have seen M in the first column, too (see the section called “svn status”).
Property Conflicts
As with file contents, local property modifications can conflict with changes committed by
someone else. If you update your working copy directory and receive property changes on a versioned resource that clash with your own, Subversion will report that the resource is in a conflicted state.
% svn update calc
M calc/Makefile.in
C calc/button.c
Updated to revision 143.
$
Subversion will also create, in the same directory as the conflicted resource, a file with a .prej
extension which contains the details of the conflict. You should examine the contents of this file
so you can decide how to resolve the conflict. Until the conflict is resolved, you will see a C in the
second column of svn status output for that resource, and attempts to commit your local modifications will fail.
$ svn status calc
C
calc/button.c
?
calc/button.c.prej
$ cat calc/button.c.prej
prop 'linecount': user set to '1256', but update set to '1301'.
$
To resolve property conflicts, simply ensure that the conflicting properties contain the values that
they should, and then use the svn resolved command to alert Subversion that you have manually
resolved the problem.
You might also have noticed the non-standard way that Subversion currently displays property differences. You can still run svn diff and redirect the output to create a usable patch file. The patch program
will ignore property patches—as a rule, it ignores any noise it can't understand. This does unfortunately
mean that to fully apply a patch generated by svn diff, any property modifications will need to be applied by hand.
133
Advanced Topics
As you can see, the presence of property modifications has no outstanding effect on the typical Subversion workflow. Your general patterns of updating your working copy, checking the status of your files
and directories, reporting on the modifications you have made, and committing those modifications to
the repository are completely immune to the presence or absence of properties. The svn program has
some additional subcommands for actually making property changes, but that is the only noticeable
asymmetry.
Special Properties
Subversion has no particular policy regarding properties—you can use them for any purpose. Subversion
asks only that you not use property names that begin with the prefix svn:. That's the namespace that it
sets aside for its own use. In fact, Subversion defines certain properties that have magical effects on the
files and directories to which they are attached. In this section, we'll untangle the mystery, and describe
how these special properties make your life just a little easier.
svn:executable
The svn:executable property is used to control a versioned file's filesystem-level execute permission bit in a semi-automated way. This property has no defined values—its mere presence indicates a
desire that the execute permission bit be kept enabled by Subversion. Removing this property will restore full control of the execute bit back to the operating system.
On many operating systems, the ability to execute a file as a command is governed by the presence of an
execute permission bit. This bit usually defaults to being disabled, and must be explicitly enabled by the
user for each file that needs it. In a working copy, new files are being created all the time as new versions of existing files are received during an update. This means that you might enable the execute bit on
a file, then update your working copy, and if that file was changed as part of the update, its execute bit
might get disabled. So, Subversion provides the svn:executable property as a way to keep the execute bit enabled.
This property has no effect on filesystems that have no concept of an executable permission bit, such as
FAT32 and NTFS. 5 Also, although it has no defined values, Subversion will force its value to * when
setting this property. Finally, this property is valid only on files, not on directories.
svn:mime-type
The svn:mime-type property serves many purposes in Subversion. Besides being a general-purpose
storage location for a file's Multipurpose Internet Mail Extensions (MIME) classification, the value of
this property determines some behavioral characteristics of Subversion itself.
For example, if a file's svn:mime-type property is set to a non-text MIME type (generally,
something that doesn't begin with text/, though there are exceptions), Subversion will assume that the
file contains binary—that is, not human-readable—data. One of the benefits that Subversion typically
provides is contextual, line-based merging of changes received from the server during an update into
your working file. But for files believed to contain binary data, there is no concept of a “line”. So, for
those files, Subversion does not attempt to perform contextual merges during updates. Instead, any time
you have locally modified a binary working copy file that is also being updated, your file is renamed
with a .orig extension, and then Subversion stores a new working copy file that contains the changes
received during the update, but not your own local modifications, at the original filename. This behavior
is really for the protection of the user against failed attempts at performing contextual merges on files
that simply cannot be contextually merged.
Also, if the svn:mime-type property is set, then the Subversion Apache module will use its value to
populate the Content-type: HTTP header when responding to GET requests. This gives a crucial
clue about how to display a file when perusing your repository with a web browser.
5
The Windows filesystems use file extensions (such as .EXE, .BAT, and .COM) to denote executable files.
134
Advanced Topics
svn:ignore
The svn:ignore property contains a list of file patterns which certain Subversion operations will ignore. Perhaps the most commonly used special property, it works in conjunction with the globalignores run-time configuration option (see the section called “Config”) to filter unversioned files and
directories out of commands svn status, svn add, and svn import.
The rationale behind the svn:ignore property is easily explained. Subversion does not assume that
every file or subdirectory in a working copy directory is intended for version control. Resources must be
explicitly placed under Subversion's management using the svn add or svn import commands. As a result, there are often many resources in a working copy that are not versioned.
Now, the svn status command displays as part of its output every unversioned file or subdirectory in a
working copy that is not already filtered out by the global-ignores option (or its built-in default
value). This is done so that users can see if perhaps they've forgotten to add a resource to version control.
But Subversion cannot possibly guess the names of every resource that should be ignored. Also, quite
often there are things that should be ignored in every working copy of a particular repository. To force
every user of that repository to add patterns for those resources to their run-time configuration areas
would be not just a burden, but has the potential to clash with the configuration needs of other working
copies that the user has checked out.
The solution is to store ignore patterns that are unique to the resources likely to appear in a given directory with the directory itself. Common examples of unversioned resources that are basically unique to a
directory, yet likely to appear there, include output from program compilations. Or—to use an example
more appropriate to this book—the HTML, PDF, or PostScript files generated as the result of a conversion of some source DocBook XML files to a more legible output format.
Ignore Patterns for CVS Users
The Subversion svn:ignore property is very similar in syntax and function to the CVS
.cvsignore file. In fact, if you are migrating a CVS working copy to Subversion, you can directly migrate the ignore patterns by using the .cvsignore file as input file to the svn propset
command:
$ svn propset svn:ignore -F .cvsignore .
property 'svn:ignore' set on '.'
$
There are, however, some differences in the ways that CVS and Subversion handle ignore patterns. The two systems use the ignore patterns at some different times, and there are slight discrepancies in what the ignore patterns apply to. Also, Subversion does not recognize the use of the
! pattern as a reset back to having no ignore patterns at all.
For this purpose, the svn:ignore property is the solution. Its value is a multi-line collection of file
patterns, one pattern per line. The property is set on the directory in which you wish the patterns to be
applied. 6 For example, say you have the following output from svn status:
$ svn status calc
M
calc/button.c
?
calc/calculator
6
The patterns are strictly for that directory—they do not carry recursively into subdirectories.
135
Advanced Topics
?
?
?
?
?
calc/data.c
calc/debug_log
calc/debug_log.1
calc/debug_log.2.gz
calc/debug_log.3.gz
In this example, you have made some property modifications to button.c, but in your working copy
you also have some unversioned files: the latest calculator program that you've compiled from your
source code, a source file named data.c, and a set of debugging output log files. Now, you know that
your build system always results in the calculator program being generated. 7 And you know that
your test suite always leaves those debugging log files lying around. These facts are true for all working
copies, not just your own. And you know that you aren't interested in seeing those things every time you
run svn status. So you use svn propedit svn:ignore calc to add some ignore patterns to the calc directory. For example, you might add this as the new value of the svn:ignore property:
calculator
debug_log*
After you've added this property, you will now have a local property modification on the calc directory. But notice what else is different about your svn status output:
$ svn status
M
calc
M
calc/button.c
?
calc/data.c
Now, all the cruft is missing from the output! Of course, those files are still in your working copy. Subversion is simply not reminding you that they are present and unversioned. And now with all the trivial
noise removed from the display, you are left with more interesting items—such as that source code file
that you probably forgot to add to version control.
If you want to see the ignored files, you can pass the --no-ignore option to Subversion:
$ svn status --no-ignore
M
calc/button.c
I
calc/calculator
?
calc/data.c
I
calc/debug_log
I
calc/debug_log.1
I
calc/debug_log.2.gz
I
calc/debug_log.3.gz
The list of patterns to ignore is also used by svn add and svn import. Both of these operations involve
asking Subversion to begin managing some set of files and directories. Rather than force the user to pick
and choose which files in a tree she wishes to start versioning, Subversion uses the ignore patterns to determine which files should not be swept into the version control system as part of a larger recursive addition or import operation.
svn:keywords
Subversion has the ability to substitute keywords—pieces of useful, dynamic information about a versioned file—into the contents of the file itself. Keywords generally describe information about the last
7
Isn't that the whole point of a build system?
136
Advanced Topics
time the file was known to be modified. Because this information changes each time the file changes,
and more importantly, just after the file changes, it is a hassle for any process except the version control
system to keep the data completely up-to-date. Left to human authors, the information would inevitably
grow stale.
For example, say you have a document in which you would like to display the last date on which it was
modified. You could burden every author of that document to, just before committing their changes, also
tweak the part of the document that describes when it was last changed. But sooner or later, someone
would forget to do that. Instead simply ask Subversion to perform keyword substitution on the LastChangedDate keyword. You control where the keyword is inserted into your document by placing a
keyword anchor at the desired location in the file. This anchor is just a string of text formatted as
$KeywordName$.
All keywords are case-sensitive where they appear as anchors in files: you must use the correct capitalization in order for the keyword to be expanded. You should consider the value of the svn:keywords
property to be case-sensitive too—certain keyword names will be recognized regardless of case, but this
behavior is deprecated.
Subversion defines the list of keywords available for substitution. That list contains the following five
keywords, some of which have aliases that you can also use:
Date
This keyword describes the last time the file was known to have been changed in the repository, and
looks something like $Date: 2002-07-22 21:42:37 -0700 (Mon, 22 Jul 2002)
$. It may also be specified as LastChangedDate.
Revision
This keyword describes the last known revision in which this file changed in the repository, and
looks something like $Revision: 144 $. It may also be specified as LastChangedRevision or Rev.
Author
This keyword describes the last known user to change this file in the repository, and looks
something like $Author: harry $. It may also be specified as LastChangedBy.
HeadURL
This keyword describes the full URL to the latest version of the file in the repository, and looks
something like $HeadURL: http://svn.collab.net/repos/trunk/README $. It
may be abbreviated as URL.
Id
This keyword is a compressed combination of the other keywords. Its substitution looks something
like $Id: calc.c 148 2002-07-28 21:30:43Z sally $, and is interpreted to mean
that the file calc.c was last changed in revision 148 on the evening of July 28, 2002 by the user
sally.
Simply adding keyword anchor text to your file does nothing special. Subversion will never attempt to
perform textual substitutions on your file contents unless explicitly asked to do so. After all, you might
be writing a document 8 about how to use keywords, and you don't want Subversion to substitute your
beautiful examples of un-substituted keyword anchors!
To tell Subversion whether or not to substitute keywords on a particular file, we again turn to the property-related subcommands. The svn:keywords property, when set on a versioned file, controls which
keywords will be substituted on that file. The value is a space-delimited list of the keyword names or aliases found in the previous table.
8
… or maybe even a section of a book …
137
Advanced Topics
For example, say you have a versioned file named weather.txt that looks like this:
Here is the latest report from the front lines.
$LastChangedDate$
$Rev$
Cumulus clouds are appearing more frequently as summer approaches.
With no svn:keywords property set on that file, Subversion will do nothing special. Now, let's enable substitution of the LastChangedDate keyword.
$ svn propset svn:keywords "Date Author" weather.txt
property 'svn:keywords' set on 'weather.txt'
$
Now you have made a local property modification on the weather.txt file. You will see no changes
to the file's contents (unless you made some of your own prior to setting the property). Notice that the
file contained a keyword anchor for the Rev keyword, yet we did not include that keyword in the property value we set. Subversion will happily ignore requests to substitute keywords that are not present in
the file, and will not substitute keywords that are not present in the svn:keywords property value.
Keywords and Spurious Differences
The user-visible result of keyword substitution might lead you to think that every version of a file
with that feature in use differs from the previous version in at least the area where the keyword
anchor was placed. However, this is actually not the case. While checking for local modifications
during svn diff, and before transmitting those local modifications during svn commit, Subversion
“un-substitutes” any keywords that it previously substituted. The result is that the versions of the
file that are stored in the repository contain only the real modifications that users make to the file.
Immediately after you commit this property change, Subversion will update your working file with the
new substitute text. Instead of seeing your keyword anchor $LastChangedDate$, you'll see its substituted result. That result also contains the name of the keyword, and continues to be bounded by the
dollar sign ($) characters. And as we predicted, the Rev keyword was not substituted because we didn't
ask for it to be.
Note also that we set the svn:keywords property to “Date Author” yet the keyword anchor used the
alias $LastChangedDate$ and still expanded correctly.
Here is the latest report from the front lines.
$LastChangedDate: 2002-07-22 21:42:37 -0700 (Mon, 22 Jul 2002) $
$Rev$
Cumulus clouds are appearing more frequently as summer approaches.
If someone else now commits a change to weather.txt, your copy of that file will continue to display the same substituted keyword value as before—until you update your working copy. At that time
the keywords in your weather.txt file will be re-substituted with information that reflects the most
recent known commit to that file.
Subversion 1.2 introduced a new variant of the keyword syntax which brought additional, useful—though perhaps atypical—functionality. You can now tell Subversion to maintain a fixed length (in
terms of the number of bytes consumed) for the substituted keyword. By using a double-colon (::) after
the keyword name, followed by a number of space characters, you define that fixed width. When Sub138
Advanced Topics
version goes to substitute your keyword for the keyword and its value, it will essentially replace only
those space characters, leaving the overall width of the keyword field unchanged. If the substituted value
is shorter than the defined field width, there will be extra padding characters (spaces) at the end of the
substituted field; if it is too long, it is truncated with a special hash (#) character just before the final dollar sign terminator.
For example, say you have a document in which you have some section of tabular data reflecting the
document's Subversion keywords. Using the original Subversion keyword substitution syntax, your file
might look something like:
$Rev$:
$Author$:
$Date$:
Revision of last commit
Author of last commit
Date of last commit
Now, that looks nice and tabular at the start of things. But when you then commit that file (with
keyword substitution enabled, of course), you see:
$Rev: 12 $:
Revision of last commit
$Author: harry $: Author of last commit
$Date: 2006-03-15 02:33:03 -0500 (Wed, 15 Mar 2006) $:
Date of last commit
The result is not so beautiful. And you might be tempted to then adjust the file after the substitution so
that it again looks tabular. But that only holds as long as the keyword values are the same width. If the
last committed revision rolls into a new place value (say, from 99 to 100), or if another person with a
longer username commits the file, stuff gets all crooked again. However, if you are using Subversion 1.2
or better, you can use the new fixed-length keyword syntax, define some field widths that seem sane,
and now your file might look like this:
$Rev::
$Author::
$Date::
$:
$:
$:
Revision of last commit
Author of last commit
Date of last commit
You commit this change to your file. This time, Subversion notices the new fixed-length keyword syntax, and maintains the width of the fields as defined by the padding you placed between the doublecolon and the trailing dollar sign. After substitution, the width of the fields is completely unchanged—the short values for Rev and Author are padded with spaces, and the long Date field is
truncated by a hash character:
$Rev:: 13
$:
$Author:: harry
$:
$Date:: 2006-03-15 0#$:
Revision of last commit
Author of last commit
Date of last commit
The use of fixed-length keywords is especially handy when performing substitutions into complex file
formats that themselves use fixed-length fields for data, or for which the stored size of a given data field
is overbearingly difficult to modify from outside the format's native application (such as for Microsoft
Office documents).
Warning
Be aware that because the width of a keyword field is measured in bytes, the potential for
corruption of multi-byte values exists. For example, a username which contains some
multi-byte UTF-8 characters might suffer truncation in the middle of the string of bytes
which make up one of those characters. The result will be a mere truncation when viewed
139
Advanced Topics
at the byte level, but will likely appear as a string with an incorrect or garbled final character when viewed as UTF-8 text. It is conceivable that certain applications, when asked to
load the file, would notice the broken UTF-8 text and deem the entire file corrupt, refusing
to operate on the file altogether.
svn:eol-style
Unless otherwise noted using a versioned file's svn:mime-type property, Subversion assumes the
file contains human-readable data. Generally speaking, Subversion only uses this knowledge to determine if contextual difference reports for that file are possible. Otherwise, to Subversion, bytes are bytes.
This means that by default, Subversion doesn't pay any attention to the type of end-of-line (EOL) markers used in your files. Unfortunately, different operating systems use different tokens to represent the
end of a line of text in a file. For example, the usual line ending token used by software on the Windows
platform is a pair of ASCII control characters—carriage return (CR) and line feed (LF). Unix software,
however, just uses the LF character to denote the end of a line.
Not all of the various tools on these operating systems are prepared to understand files that contain line
endings in a format that differs from the native line ending style of the operating system on which they
are running. Common results are that Unix programs treat the CR character present in Windows files as
a regular character (usually rendered as ^M), and that Windows programs combine all of the lines of a
Unix file into one giant line because no carriage return-linefeed (or CRLF) character combination was
found to denote the end of line.
This sensitivity to foreign EOL markers can become frustrating for folks who share a file across different operating systems. For example, consider a source code file, and developers that edit this file on both
Windows and Unix systems. If all the developers always use tools which preserve the line ending style
of the file, no problems occur.
But in practice, many common tools either fail to properly read a file with foreign EOL markers, or they
convert the file's line endings to the native style when the file is saved. If the former is true for a developer, he has to use an external conversion utility (such as dos2unix or its companion, unix2dos) to
prepare the file for editing. The latter case requires no extra preparation. But both cases result in a file
that differs from the original quite literally on every line! Prior to committing his changes, the user has
two choices. Either he can use a conversion utility to restore the modified file to the same line ending
style that it was in before his edits were made. Or, he can simply commit the file—new EOL markers
and all.
The result of scenarios like these include wasted time and unnecessary modifications to committed files.
Wasted time is painful enough. But when commits change every line in a file, this complicates the job of
determining which of those lines were changed in a non-trivial way. Where was that bug really fixed?
On what line was a syntax error introduced?
The solution to this problem is the svn:eol-style property. When this property is set to a valid
value, Subversion uses it to determine what special processing to perform on the file so that the file's
line ending style isn't flip-flopping with every commit that comes from a different operating system. The
valid values are:
native
This causes the file to contain the EOL markers that are native to the operating system on which
Subversion was run. In other words, if a user on a Windows machine checks out a working copy
that contains a file with an svn:eol-style property set to native, that file will contain CRLF
EOL markers. A Unix user checking out a working copy which contains the same file will see LF
EOL markers in his copy of the file.
140
Advanced Topics
Note that Subversion will actually store the file in the repository using normalized LF EOL markers
regardless of the operating system. This is basically transparent to the user, though.
CRLF
This causes the file to contain CRLF sequences for EOL markers, regardless of the operating system
in use.
LF
This causes the file to contain LF characters for EOL markers, regardless of the operating system in
use.
CR
This causes the file to contain CR characters for EOL markers, regardless of the operating system in
use. This line ending style is not very common. It was used on older Macintosh platforms (on which
Subversion doesn't even run).
svn:externals
The svn:externals property contains instructions for Subversion to populate a versioned directory
with one or more other checked-out Subversion working copies. For more information on this keyword
and its use, see the section called “Externals Definitions”.
svn:special
The svn:special property is the only svn: property that isn't meant to be directly set or modified
by users. Subversion automatically sets this property whenever a “special” object is scheduled for addition, such as a symbolic link. The repository stores an svn:special object as an ordinary file.
However, when a client sees this property during checkouts or updates, it interprets the contents of the
file and translates the item back into the special type of object. In versions of Subversion current at the
time of writing, only versioned symbolic links have this property attached, but in future versions of Subversion other special types of nodes will probably use this property as well.
Note: Windows clients don't have symbolic links, and thus ignore any svn:special files coming
from a repository that claim to be symbolic links. On Windows, the user ends up with an ordinary versioned file in the working copy.
svn:needs-lock
This property is used to signify that the file it's attached to ought to be locked before editing. The value
of the property is irrelevant; Subversion will normalize its value to *. When present, the file will be
read-only unless the user has explicitly locked the file. When a lock-token is present (as a result of running svn lock), the file becomes read-write. When the lock is released, the file becomes read-only again.
To learn more about how, when, and why this property should be used, see the section called “Lock
Communication”.
Automatic Property Setting
Properties are a powerful feature of Subversion, acting as key components of many Subversion features
discussed elsewhere in this and other chapters—textual diff and merge support, keyword substitution,
newline translation, etc. But to get the full benefit of properties, they must be set on the right files and
directories. Unfortunately, that can be a step easily forgotten in the routine of things, especially since
failing to set a property doesn't usually result in an obvious error condition (at least compared to, say,
failing to add a file to version control). To help your properties get applied to the places that need them,
Subversion provides a couple of simple but useful features.
141
Advanced Topics
Whenever you introduce a file to version control using the svn add or svn import commands, Subversion runs a very basic heuristic to determine if that file consists of human-readable or non-human-readable content. If the latter is the decision made, Subversion will automatically set the
svn:mime-type property on that file to application/octet-stream (the generic “this is a
collection of bytes” MIME type). Of course, if Subversion guesses incorrectly, or if you wish to set the
svn:mime-type property to something more precise—perhaps image/png or application/
x-shockwave-flash—you can always remove or edit that property.
Subversion also provides the auto-props feature, which allows you to create mappings of filename patterns to property names and values. These mappings are made in your runtime configuration area. They
again affect adds and imports, and not only can override any default MIME type decision made by Subversion during those operations, they can also set additional Subversion or custom properties, too. For
example, you might create a mapping that says that any time you add JPEG files—ones that match the
pattern *.jpg—Subversion should automatically set the svn:mime-type property on those files to
image/jpeg. Or perhaps any files that match *.cpp should have svn:eol-style set to native,
and svn:keywords set to Id. Auto-prop support is perhaps the handiest property related tool in the
Subversion toolbox. See the section called “Config” for more about configuring that support.
Locking
Subversion's “copy-modify-merge” model is optimal when users are collaborating on projects that consist of line-based text files, such as program source code. However, as discussed in When Locking is
Necessary, sometimes one has to use the “lock-modify-unlock” model instead of Subversion's standard
concurrent model. When a file consists of binary data, it's often difficult or impossible to merge two sets
of changes made in parallel by different users. For this reason, Subversion 1.2 and later offers a feature
known as locking, often known as “reserved checkouts” in other version control systems.
Subversion's locking feature has two main goals:
• Serializing access to a resource. Allow a user to grab an exclusive right to change to a file in the repository. If Harry reserves the right to change foo.jpg, then Sally should not be able to commit a
change to it.
• Aiding communication. Prevent users from wasting time on unmergeable changes. If Harry has reserved the right to change foo.jpg, then it should be easy for Sally to notice this fact and avoid
working on the file.
Subversion's locking feature is currently limited to files only—it's not yet possible to reserve access to a
whole directory tree.
Three meanings of “lock”
In this section, and almost everywhere in this book, the words “lock” and “locking” describe a
mechanism for mutual exclusion between users to avoid clashing commits. Unfortunately, there
are two other sorts of “lock” with which Subversion, and therefore this book, sometimes needs to
be concerned.
• Working copy locks, used internally by Subversion to prevent clashes between multiple Subversion clients operating on the same working copy. This is the sort of lock indicated by an L in
the third column of svn status output, and removed by the svn cleanup command, as described
in the section called “svn cleanup”.
• Database locks, used internally by the Berkeley DB backend to prevent clashes between mul-
142
Advanced Topics
tiple programs trying to access the database. This is the sort of lock whose unwanted persistence after an error can cause a repository to be “wedged”, as described in the section called
“Repository Recovery”.
You can generally forget about these other sorts of lock, until something goes wrong that requires
you to care about them. In this book, “lock” means the first sort unless the contrary is either clear
from context or explicitly stated.
Creating locks
In the Subversion repository, a lock is a piece of metadata which grants exclusive access to one user to
change a file. This user is said to be the lock owner. Each lock also has a unique identifier, typically a
long string of characters, known as the lock token. The repository manages locks in a separate table, and
enforces locks during a commit operation. If any commit transaction attempts to modify or delete the
file (or delete a parent of the file), the repository will demand two pieces of information:
1. User authentication. The client performing the commit must be authenticated as the lock owner.
2. Software authorization. The user's working copy must send the lock token with the commit, proving
that it knows exactly which lock it's using.
An example is in order, to demonstrate. Let's say that Harry has decided to change a JPEG image. To
prevent other people from committing changes to the file, he locks the file in the repository using the
svn lock command:
$ svn lock banana.jpg --message "Editing file for tomorrow's release."
'banana.jpg' locked by user 'harry'.
$ svn status
K banana.jpg
$ svn info banana.jpg
Path: banana.jpg
Name: banana.jpg
URL: http://svn.example.com/repos/project/banana.jpg
Repository UUID: edb2f264-5ef2-0310-a47a-87b0ce17a8ec
Revision: 2198
Node Kind: file
Schedule: normal
Last Changed Author: frank
Last Changed Rev: 1950
Last Changed Date: 2005-03-15 12:43:04 -0600 (Tue, 15 Mar 2005)
Text Last Updated: 2005-06-08 19:23:07 -0500 (Wed, 08 Jun 2005)
Properties Last Updated: 2005-06-08 19:23:07 -0500 (Wed, 08 Jun 2005)
Checksum: 3b110d3b10638f5d1f4fe0f436a5a2a5
Lock Token: opaquelocktoken:0c0f600b-88f9-0310-9e48-355b44d4a58e
Lock Owner: harry
Lock Created: 2005-06-14 17:20:31 -0500 (Tue, 14 Jun 2005)
Lock Comment (1 line):
Editing file for tomorrow's release.
There are a number of new things demonstrated in the previous example. First, notice that Harry passed
143
Advanced Topics
the --message option to svn lock. Similar to svn commit, the svn lock command can take comments
(either via --message (-m) or --file (-F)) to describe the reason for locking the file. Unlike
svn commit, however, svn lock will not demand a message by launching your preferred text editor.
Lock comments are optional, but still recommended to aid communication.
Second, the lock attempt succeeded. This means that the file wasn't already locked, and that Harry had
the latest version of the file. If Harry's working copy of the file had been out-of-date, the repository
would have rejected the request, forcing harry to svn update and reattempt the locking command.
Also notice that after creating the lock in the repository, the working copy has cached information about
the lock—most importantly, the lock token. The presence of the lock token is critical. It gives the working copy authorization to make use of the lock later on. The svn status command shows a K next to the
file (short for locKed), indicating that the lock token is present.
Regarding lock tokens
A lock token isn't an authentication token, so much as an authorization token. The token isn't a
protected secret. In fact, a lock's unique token is discoverable by anyone who runs svn info URL.
A lock token is special only when it lives inside a working copy. It's proof that the lock was created in that particular working copy, and not somewhere else by some other client. Merely authenticating as the lock owner isn't enough to prevent accidents.
For example: suppose you lock a file using a computer at your office, perhaps as part of a changeset in progress. It should not be possible for a working copy (or alternate Subversion client) on
your home computer to accidentally commit a change to that same file, just because you've authenticated as the lock's owner. In other words, the lock token prevents one piece of Subversion-related software from undermining the work of another. (In our example, if you really need to
change the file from an alternate working copy, you would need to break the lock and re-lock the
file.)
Now that Harry has locked banana.jpg, Sally is unable to change or delete that file:
$ whoami
sally
$ svn delete banana.jpg
D
banana.jpg
$ svn commit -m "Delete useless file."
Deleting
banana.jpg
svn: Commit failed (details follow):
svn: DELETE of
'/repos/project/!svn/wrk/64bad3a9-96f9-0310-818a-df4224ddc35d/banana.jpg':
423 Locked (http://svn.example.com)
But Harry, after touching up the banana's shade of yellow, is able to commit his changes to the file.
That's because he authenticates as the lock owner, and also because his working copy holds the correct
lock token:
$ whoami
harry
$ svn status
144
Advanced Topics
M
K banana.jpg
$ svn commit -m "Make banana more yellow"
Sending
banana.jpg
Transmitting file data .
Committed revision 2201.
$ svn status
$
Notice that after the commit is finished, svn status shows that the lock token is no longer present in
working copy. This is the standard behavior of svn commit: it walks the working copy (or list of targets,
if you provide such a list), and sends all lock tokens it encounters to the server as part of the commit
transaction. After the commit completes successfully, all of the repository locks that were mentioned are
released—even on files that weren't committed. The rationale here is to discourage users from being
sloppy about locking, or from holding locks for too long. For example, suppose Harry were to haphazardly lock thirty files in a directory named images, because he's unsure of which files he needs to
change. He ends up making changes to only four files. When he runs svn commit images, the process
would still release all thirty locks.
This behavior of automatically releasing locks can be overridden with the --no-unlock option to svn
commit. This is best used for those times when you want to commit changes, but still plan to make more
changes and thus need to retain existing locks. This behavior is also semi-permanently tweakable, by
setting no-unlock = yes in your run-time config file (see the section called “Runtime Configuration Area”).
Of course, locking a file doesn't oblige one to commit a change to it. The lock can be released at any
time with a simple svn unlock command:
$ svn unlock banana.c
'banana.c' unlocked.
Discovering locks
When a commit fails due to someone else's locks, it's fairly easy to learn about them. The easiest of
these is svn status --show-updates:
$ whoami
sally
$ svn status --show-updates
M
23
bar.c
M
O
32
raisin.jpg
*
72
foo.h
Status against revision:
105
In this example, Sally can see not only that her copy of foo.h is out-of-date, but that one of the two
modified files she plans to commit is locked in the repository. The O symbol stands for “Other”, meaning that a lock exists on the file, and was created by somebody else. If she were to attempt a commit, the
lock on raisin.jpg would prevent it. Sally is left wondering who made the lock, when, and why.
Once again, svn info has the answers:
$ svn info http://svn.example.com/repos/project/raisin.jpg
Path: raisin.jpg
145
Advanced Topics
Name: raisin.jpg
URL: http://svn.example.com/repos/project/raisin.jpg
Repository UUID: edb2f264-5ef2-0310-a47a-87b0ce17a8ec
Revision: 105
Node Kind: file
Last Changed Author: sally
Last Changed Rev: 32
Last Changed Date: 2005-01-25 12:43:04 -0600 (Tue, 25 Jan 2005)
Lock Token: opaquelocktoken:fc2b4dee-98f9-0310-abf3-653ff3226e6b
Lock Owner: harry
Lock Created: 2005-02-16 13:29:18 -0500 (Wed, 16 Feb 2005)
Lock Comment (1 line):
Need to make a quick tweak to this image.
Just as svn info can be used to examine objects in the working copy, it can also be used to examine objects in the repository. If the main argument to svn info is a working copy path, then all of the working
copy's cached information is displayed; any mention of a lock means that the working copy is holding a
lock token (if a file is locked by another user or in another working copy, svn info on a working copy
path will show no lock information at all). If the main argument to svn info is a URL, then the information reflects the latest version of an object in the repository; any mention of a lock describes the current
lock on the object.
So in this particular example, Sally can see that Harry locked the file on February 16th to “make a quick
tweak”. It being June, she suspects that he probably forgot all about the lock. She might phone Harry to
complain and ask him to release the lock. If he's unavailable, she might try to forcibly break the lock
herself or ask an administrator to do so.
Breaking and stealing locks
A repository lock isn't sacred; it can be released not only by the person who created it, but by anyone at
all. When somebody other than the original lock creator destroys a lock, we refer to this as breaking the
lock.
From the administrator's chair, it's simple to break locks. The svnlook and svnadmin programs have the
ability to display and remove locks directly from the repository. (For more information about these
tools, see the section called “An Administrator's Toolkit”.)
$ svnadmin lslocks /usr/local/svn/repos
Path: /project2/images/banana.jpg
UUID Token: opaquelocktoken:c32b4d88-e8fb-2310-abb3-153ff1236923
Owner: frank
Created: 2005-06-15 13:29:18 -0500 (Wed, 15 Jun 2005)
Expires:
Comment (1 line):
Still improving the yellow color.
Path: /project/raisin.jpg
UUID Token: opaquelocktoken:fc2b4dee-98f9-0310-abf3-653ff3226e6b
Owner: harry
Created: 2005-02-16 13:29:18 -0500 (Wed, 16 Feb 2005)
Expires:
Comment (1 line):
Need to make a quick tweak to this image.
$ svnadmin rmlocks /usr/local/svn/repos /project/raisin.jpg
Removed lock on '/project/raisin.jpg'.
The more interesting option is allowing users to break each other's locks over the network. To do this,
146
Advanced Topics
one simply needs to pass the --force to the unlock command:
$ whoami
sally
$ svn status --show-updates
M
23
bar.c
M
O
32
raisin.jpg
*
72
foo.h
Status against revision:
105
$ svn unlock raisin.jpg
svn: 'raisin.jpg' is not locked in this working copy
$ svn info raisin.jpg | grep URL
URL: http://svn.example.com/repos/project/raisin.jpg
$ svn unlock http://svn.example.com/repos/project/raisin.jpg
svn: Unlock request failed: 403 Forbidden (http://svn.example.com)
$ svn unlock --force http://svn.example.com/repos/project/raisin.jpg
'raisin.jpg' unlocked.
Sally's initial attempt to unlock failed because she ran svn unlock directly on her working copy of the
file, and no lock token was present. To remove the lock directly from the repository, she needs to pass a
URL to svn unlock. Her first attempt to unlock the URL fails, because she can't authenticate as the lock
owner (nor does she have the lock token). But when she passes --force, the authentication and authorization requirements are ignored, and the remote lock is broken.
Of course, simply breaking a lock may not be enough. In the running example, Sally may not only want
to break Harry's long-forgotten lock, but re-lock the file for her own use. She can accomplish this by
running svn unlock --force and then svn lock back-to-back, but there's a small chance that somebody
else might lock the file between the two commands. The simpler thing to is steal the lock, which involves breaking and re-locking the file all in one atomic step. To do this, pass the --force option to
svn lock:
$ svn lock raisin.jpg
svn: Lock request failed: 423 Locked (http://svn.example.com)
$ svn lock --force raisin.jpg
'raisin.jpg' locked by user 'sally'.
In any case, whether the lock is broken or stolen, Harry may be in for a surprise. Harry's working copy
still contains the original lock token, but that lock no longer exists. The lock token is said to be defunct.
The lock represented by the lock-token has either been broken (no longer in the repository), or stolen
(replaced with a different lock). Either way, Harry can see this by asking svn status to contact the repository:
$ whoami
harry
$ svn status
K raisin.jpg
$ svn status --show-updates
B
32
raisin.jpg
147
Advanced Topics
$ svn update
B raisin.jpg
$ svn status
$
If the repository lock was broken, then svn status --show-updates displays a B (Broken) symbol next to
the file. If a new lock exists in place of the old one, then a T (sTolen) symbol is shown. Finally, svn update notices any defunct lock tokens and removes them from the working copy.
Locking Policies
Different systems have different notions of how strict a lock should be. Some folks argue that
locks must be strictly enforced at all costs, releasable only by the original creator or administrator.
They argue that if anyone can break a lock, then chaos breaks loose and the whole point of locking is defeated. The other side argues that locks are first and foremost a communication tool. If
users are constantly breaking each others' locks, then it represents a cultural failure within the
team and the problem falls outside the scope of software enforcement.
Subversion defaults to the “softer” approach, but still allows administrators to create stricter enforcement policies through the use of hook scripts. In particular, the pre-lock and preunlock hooks allow administrators to decide when lock creation and lock releases are allowed
to happen. Depending on whether or not a lock already exists, these two hooks can decide whether or not to allow a certain user to break or steal a lock. The post-lock and post-unlock
hooks are also available, and can be used to send email after locking actions.
To learn more about repository hooks, see the section called “Hook Scripts”.
Lock Communication
We've seen how svn lock and svn unlock can be used to create, release, break, and steal locks. This satisfies the goal of serializing commit access to a file. But what about the larger problem of preventing
wasted time?
For example, suppose Harry locks an image file and then begins editing it. Meanwhile, miles away,
Sally wants to do the same thing. She doesn't think to run svn status --show-updates, so she has no idea
that Harry has already locked the file. She spends hours editing the file, and when she tries to commit
her change, she discovers that either the file is locked or that she's out-of-date. Regardless, her changes
aren't mergeable with Harry's. One of these two people has to throw away their work, and a lot of time
has been wasted.
Subversion's solution to this problem is provide a mechanism to remind users that a file ought to be
locked before the editing begins.
The mechanism is a special property, svn:needs-lock. If the property is attached to a file (the value
is irrelevant), then the file will have read-only permissions. When the user locks the file and receives a
lock token, the file becomes read-write. When the lock is released—either explicitly unlocked, or released via commit—the file returns to read-only again.
The theory, then, is that if the image file has this property attached, then Sally would immediately notice
something is strange when she opens the file for editing. Her application would be unable to save
changes, or (better yet) tell her that the file is read-only. This reminds her to lock the file before editing,
whereby she discovers the pre-existing lock:
148
Advanced Topics
$ /usr/local/bin/gimp raisin.jpg
gimp: error: file is read-only!
$ ls -l raisin.jpg
-r--r--r-1 sally
sally
215589 Jun
8 19:23 raisin.jpg
$ svn lock raisin.jpg
svn: Lock request failed: 423 Locked (http://svn.example.com)
$ svn info http://svn.example.com/repos/project/raisin.jpg | grep Lock
Lock Token: opaquelocktoken:fc2b4dee-98f9-0310-abf3-653ff3226e6b
Lock Owner: harry
Lock Created: 2005-06-08 07:29:18 -0500 (Thu, 08 June 2005)
Lock Comment (1 line):
Making some tweaks. Locking for the next two hours.
As a matter of “best practice”, both users and administrators are encouraged to attach the
svn:needs-lock property to any file which cannot be contextually merged. It's the main technique
for encouraging good locking habits and preventing wasted effort.
Note that this property is a communication tool which works independently from the locking system. In
other words, any file can be locked, whether or not this property is present. And conversely, the presence of this property doesn't make the repository require a lock when committing.
The system isn't flawless, either. It's possible that even when a file has the property, the read-only reminder won't always work. Sometimes applications misbehave and “hijack” the read-only file, silently
allowing users to edit and save the file anyway. Unfortunately, there's not much Subversion can do
about this.
Peg and Operative Revisions
We make use of the ability to copy, move, rename, and completely replace files and directories on our
computers all that time. And your version control system shouldn't get in the way of your doing these
things with your version controlled files and directories, either. Subversion's file management support is
quite liberating, affording almost as much flexibility for versioned files that you'd expect when manipulating your unversioned ones. But that flexibility means that across the lifetime of your repository, a given versioned resource might have many paths, and a given path might represent several entirely different
versioned resources. And this introduces a certain level of complexity to your interactions with those
paths and resources.
Subversion is pretty smart about noticing when an object's version history includes such “changes of address”. For example, if you ask for all the logs of a particular file that was renamed last week, Subversion happily provides all those logs—the revision in which the rename itself happened, plus the logs of
relevant revisions both before and after that rename. So, most of the time, you don't even have to think
about such things. But occasionally, Subversion needs your help to clear up ambiguities.
The simplest example of this occurs when a directory or file is deleted from version control, and then a
new directory or file is created with the same name and added to version control. Clearly the thing you
deleted and the thing you later added aren't the same thing, they merely happen to have had the same
path, which we'll call /trunk/object. What, then, does it mean to ask Subversion about the history
of /trunk/object? Are you asking about the thing currently at that location, or the old thing you deleted from that location? Are you asking about the operations that have happened to all the objects that
have lived at that path? Clearly, Subversion needs a hint about what you are really asking.
And thanks to moves, versioned resource history can get far more twisted than that, even. For example,
you might have a directory named concept, containing some nascent software project you've been
149
Advanced Topics
toying with. Eventually, though, that project matures to the point that the idea seems to actually have
some wings, so you do the unthinkable and decide to give the project a name. 9 Let's say you called your
software Frabnaggilywort. At this point, it makes sense to rename the directory to reflect the project's
new name, so concept is renamed to frabnaggilywort. Life goes on, Frabnaggilywort releases a
1.0 version, and is downloaded and used daily by hordes of people aiming to improve their lives.
It's a nice story, really, but it doesn't end there. Entrepreneur that you are, you've already got another
think in the tank. So you make a new directory, concept, and the cycle begins again. In fact, the cycle
begins again many times over the years, each time starting with that old concept directory, then sometimes seeing that directory renamed as the idea cures, sometimes seeing it deleted when you scrap the
idea. Or, to get really sick, maybe you rename concept to something else for a while, but later rename
the thing back to concept for some reason.
When scenarios like these occur, attempting to instruct Subversion to work with these re-used paths can
be a little like instructing a motorist in Chicago's West Suburbs to drive east down Roosevelt Road and
turn left onto Main Street. In a mere twenty minutes, you can cross “Main Street” in Wheaton, Glen
Ellyn, and Lombard. And no, they aren't the same street. Our motorist—and our Subversion—need a
little more detail in order to do the right thing.
In version 1.1, Subversion introduced a way for you to tell it exactly which Main Street you meant. It's
called the peg revision, and it is a revision provided to Subversion for the sole purpose of identifying a
unique line of history. Because at most one versioned resource may occupy a path at any given
time—or, more precisely, in any one revision—the combination of a path and a peg revision is all that is
needed to refer to a specific line of history. Peg revisions are specified to the Subversion command-line
client using at syntax, so called because the syntax involves appending an “at sign” (@) and the peg revision to the end of the path with which the revision is associated.
But what of the --revision (-r) of which we've spoken so much in this book? That revision (or
set of revisions) is called the operative revision (or operative revision range). Once a particular line of
history has been identified using a path and peg revision, Subversion performs the requested operation
using the operative revision(s). To map this to our Chicagoland streets analogy, if we are told to go to
606 N. Main Street in Wheaton, 10 we can think of “Main Street” as our path and “Wheaton” as our peg
revision. These two pieces of information identify a unique path which can travelled (north or south on
Main Street), and will keep us from travelling up and down the wrong Main Street in search of our destination. Now we throw in “606 N.” as our operative revision, of sorts, and we know exactly where to
go.
The "peg-revision" algorithm
When the commandline client sees a command of the form:
$ svn command -r OPERATIVE-REV item@PEG-REV
…it performs the following algorithm:
• Go to revision PEG-REV, and find item. This locates a unique object in the repository.
• Trace the object's history backwards (through any possible renames) to its ancestor in revision
OPERATIVE-REV.
• Perform the requested action on that ancestor, wherever it is located, or whatever its name
might be.
9
“You're
10
not supposed to name it. Once you name it, you start getting attached to it.” — Mike Wazowski
606 N. Main Street, Wheaton, Illinois, is the home of the Wheaton History Center. Get it—“History Center”? It seemed appropriate….
150
Advanced Topics
Remember that even when you don't explicitly supply a peg-revision, it's still present. It defaults
to BASE for working copy items, and to HEAD for URLs.
Say that long ago we created our repository, and in revision 1 added our first concept directory, plus
an IDEA file in that directory talking about the concept. After several revisions in which real code was
added and tweaked, we, in revision 20, renamed this directory to frabnaggilywort. By revision 27,
we had a new concept, a new concept directory to hold it, and a new IDEA file to describe it. And
then five years and twenty thousand revisions flew by, just like they would in any good romance story.
Now, years later, we wonder what the IDEA file looked like back in revision 1. But Subversion needs to
know if we are asking about how the current file looked back in revision 1, or are we asking for the contents of whatever file lived at concepts/IDEA in revision 1? Certainly those questions have different
answers, and because of peg revisions, you can ask either of them. To find out how the current IDEA
file looked in that old revision, you run:
$ svn cat -r 1 concept/IDEA
subversion/libsvn_client/ra.c:775: (apr_err=20014)
svn: Unable to find repository location for 'concept/IDEA' in revision 1
Of course, in this example, the current IDEA file didn't exist yet in revision 1, so Subversion gives an error. The command above is shorthand for a longer notation which explicitly lists a peg revision. The expanded notation is:
$ svn cat -r 1 concept/IDEA@BASE
subversion/libsvn_client/ra.c:775: (apr_err=20014)
svn: Unable to find repository location for 'concept/IDEA' in revision 1
And when executed, it has the expected results. Peg revisions generally default to a value of BASE (the
revision currently present in the working copy) when applied to working copy paths, and of HEAD when
applied to URLs.
Let's ask the other question, then—in revision 1, what were the contents of whatever file occupied the
address concepts/IDEA at the time? We'll use an explicit peg revision to help us out.
$ svn cat concept/IDEA@1
The idea behind this project is to come up with a piece of software
that can frab a naggily wort. Frabbing naggily worts is tricky
business, and doing it incorrectly can have serious ramifications, so
we need to employ over-the-top input validation and data verification
mechanisms.
This appears to be the right output. The text even mentions frabbing naggily worts, so this is almost certainly the file which describes the software now called Frabnaggilywort. In fact, we can verify this using
the combination of an explicit peg revision and explicit operative revision. We know that in HEAD, the
Frabnaggilywort project is located in the frabnaggilywort directory. So we specify that we want to
see how the line of history identified in HEAD as the path frabnaggilywort/IDEA looked in revision 1.
$ svn cat -r 1 frabnaggilywort/IDEA@HEAD
The idea behind this project is to come up with a piece of software
that can frab a naggily wort. Frabbing naggily worts is tricky
151
Advanced Topics
business, and doing it incorrectly can have serious ramifications, so
we need to employ over-the-top input validation and data verification
mechanisms.
And the peg and operative revisions need not be so trivial, either. For example, say frabnaggilywort had been deleted from HEAD, but we know it existed in revision 20, and we want to see the diffs
for its IDEA file between revisions 4 and 10. We can use the peg revision 20 in conjunction with the
URL that would have held Frabnaggilywort's IDEA file in revision 20, and then use 4 and 10 as our operative revision range.
$ svn diff -r 4:10 http://svn.red-bean.com/projects/frabnaggilywort/IDEA@20
Index: frabnaggilywort/IDEA
===================================================================
--- frabnaggilywort/IDEA (revision 4)
+++ frabnaggilywort/IDEA (revision 10)
@@ -1,5 +1,5 @@
-The idea behind this project is to come up with a piece of software
-that can frab a naggily wort. Frabbing naggily worts is tricky
-business, and doing it incorrectly can have serious ramifications, so
-we need to employ over-the-top input validation and data verification
-mechanisms.
+The idea behind this project is to come up with a piece of
+client-server software that can remotely frab a naggily wort.
+Frabbing naggily worts is tricky business, and doing it incorrectly
+can have serious ramifications, so we need to employ over-the-top
+input validation and data verification mechanisms.
Fortunately, most folks aren't faced with such complex situations. But when you are, remember that peg
revisions are that extra hint Subversion needs to clear up ambiguity.
Externals Definitions
Sometimes it is useful to construct a working copy that is made out of a number of different checkouts.
For example, you may want different subdirectories to come from different locations in a repository, or
perhaps from different repositories altogether. You could certainly setup such a scenario by hand—using
svn checkout to create the sort of nested working copy structure you are trying to achieve. But if this
layout is important for everyone who uses your repository, every other user will need to perform the
same checkout operations that you did.
Fortunately, Subversion provides support for externals definitions. An externals definition is a mapping
of a local directory to the URL—and possibly a particular revision—of a versioned resource. In Subversion, you declare externals definitions in groups using the svn:externals property. You can create
or modify this property using svn propset or svn propedit (see the section called “Why Properties?”). It
can be set on any versioned directory, and its value is a multi-line table of subdirectories (relative to the
versioned directory on which the property is set) and fully qualified, absolute Subversion repository
URLs.
$ svn propget svn:externals calc
third-party/sounds
http://sounds.red-bean.com/repos
third-party/skins
http://skins.red-bean.com/repositories/skinproj
third-party/skins/toolkit -r21 http://svn.red-bean.com/repos/skin-maker
The convenience of the svn:externals property is that once it is set on a versioned directory, everyone who checks out a working copy with that directory also gets the benefit of the externals definition.
In other words, once one person has made the effort to define those nested working copy checkouts, no
152
Advanced Topics
one else has to bother—Subversion will, upon checkout of the original working copy, also checkout the
external working copies.
Note the previous externals definition example. When someone checks out a working copy of the calc
directory, Subversion also continues to checkout the items found in its externals definition.
$ svn checkout http://svn.example.com/repos/calc
A calc
A calc/Makefile
A calc/integer.c
A calc/button.c
Checked out revision 148.
Fetching external item into calc/third-party/sounds
A calc/third-party/sounds/ding.ogg
A calc/third-party/sounds/dong.ogg
A calc/third-party/sounds/clang.ogg
…
A calc/third-party/sounds/bang.ogg
A calc/third-party/sounds/twang.ogg
Checked out revision 14.
Fetching external item into calc/third-party/skins
…
If you need to change the externals definition, you can do so using the regular property modification
subcommands. When you commit a change to the svn:externals property, Subversion will synchronize the checked-out items against the changed externals definition when you next run svn update.
The same thing will happen when others update their working copies and receive your changes to the
externals definition.
The svn status command also recognizes externals definitions, displaying a status code of X for the disjoint subdirectories into which externals are checked out, and then recursing into those subdirectories to
display the status of the external items themselves.
Tip
You should strongly consider using explicit revision numbers in all of your externals definitions. Doing so means that you get to decide when to pull down a different snapshot of external information, and exactly which snapshot to pull. Besides the common sense aspect
of not being surprised by changes to third-party repositories that you might not have any
control over, using explicit revision numbers also means that as you backdate your working copy to a previous revision, your externals definitions will also revert to the way they
looked in that previous revision, which in turn means that the external working copies will
be updated to match they way they looked back when your repository was at that previous
revision. For software projects, this could be the difference between a successful and a
failed build of an older snapshot of your complex codebase.
The support that exists for externals definitions in Subversion today can be a little misleading, though.
First, an externals definition can only point to directories, not files. Second, the externals definition cannot point to relative paths (paths like ../../skins/myskin). Third, the working copies created via
the externals definition support are still disconnected from the primary working copy (on whose versioned directories the svn:externals property was actually set). And Subversion still only truly operates on non-disjoint working copies. So, for example, if you want to commit changes that you've made
in one or more of those external working copies, you must run svn commit explicitly on those working
copies—committing on the primary working copy will not recurse into any external ones.
Also, since the definitions themselves use absolute URLs, moving or copying a directory to which they
153
Advanced Topics
are attached will not affect what gets checked out as an external (though the relative local target subdirectory will, of course, move with renamed directory). This can be confusing—even frustrating—in certain situations. For example, if you use externals definitions on a directory in your /trunk development line which point to other areas of that same line, and then you use svn copy to branch that line to
some new location /branches/my-branch, the externals definitions on items in your new branch
will still refer to versioned resources in /trunk. Be aware, too, that if you need to re-parent your working copy (using svn switch --relocate), externals definitions will not also be re-parented.
Finally, there might be times when you would prefer that svn subcommands would not recognize or otherwise operate on the external working copies created as the result of externals definition handling. In
those instances, you can pass the --ignore-externals option to the subcommand.
Vendor branches
As is especially the case when developing software, the data that you maintain under version control is
often closely related to, or perhaps dependent upon, someone else's data. Generally, the needs of your
project will dictate that you stay as up-to-date as possible with the data provided by that external entity
without sacrificing the stability of your own project. This scenario plays itself out all the
time—anywhere that the information generated by one group of people has a direct effect on that which
is generated by another group.
For example, software developers might be working on an application which makes use of a third-party
library. Subversion has just such a relationship with the Apache Portable Runtime library (see the section called “The Apache Portable Runtime Library”). The Subversion source code depends on the APR
library for all its portability needs. In earlier stages of Subversion's development, the project closely
tracked APR's changing API, always sticking to the “bleeding edge” of the library's code churn. Now
that both APR and Subversion have matured, Subversion attempts to synchronize with APR's library
API only at well-tested, stable release points.
Now, if your project depends on someone else's information, there are several ways that you could attempt to synchronize that information with your own. Most painfully, you could issue oral or written instructions to all the contributors of your project, telling them to make sure that they have the specific
versions of that third-party information that your project needs. If the third-party information is maintained in a Subversion repository, you could also use Subversion's externals definitions to effectively
“pin down” specific versions of that information to some location in your own working copy directory
(see the section called “Externals Definitions”).
But sometimes you want to maintain custom modifications to third-party data in your own version control system. Returning to the software development example, programmers might need to make modifications to that third-party library for their own purposes. These modifications might include new functionality or bug fixes, maintained internally only until they become part of an official release of the
third-party library. Or the changes might never be relayed back to the library maintainers, existing solely
as custom tweaks to make the library further suit the needs of the software developers.
Now you face an interesting situation. Your project could house its custom modifications to the thirdparty data in some disjointed fashion, such as using patch files or full-fledged alternate versions of files
and directories. But these quickly become maintenance headaches, requiring some mechanism by which
to apply your custom changes to the third-party data, and necessitating regeneration of those changes
with each successive version of the third-party data that you track.
The solution to this problem is to use vendor branches. A vendor branch is a directory tree in your own
version control system that contains information provided by a third-party entity, or vendor. Each version of the vendor's data that you decide to absorb into your project is called a vendor drop.
Vendor branches provide two key benefits. First, by storing the currently supported vendor drop in your
own version control system, the members of your project never need to question whether they have the
right version of the vendor's data. They simply receive that correct version as part of their regular work154
Advanced Topics
ing copy updates. Secondly, because the data lives in your own Subversion repository, you can store
your custom changes to it in-place—you have no more need of an automated (or worse, manual) method
for swapping in your customizations.
General Vendor Branch Management Procedure
Managing vendor branches generally works like this. You create a top-level directory (such as /
vendor) to hold the vendor branches. Then you import the third party code into a subdirectory of that
top-level directory. You then copy that subdirectory into your main development branch (for example, /
trunk) at the appropriate location. You always make your local changes in the main development
branch. With each new release of the code you are tracking you bring it into the vendor branch and
merge the changes into /trunk, resolving whatever conflicts occur between your local changes and the
upstream changes.
Perhaps an example will help to clarify this algorithm. We'll use a scenario where your development
team is creating a calculator program that links against a third-party complex number arithmetic library,
libcomplex. We'll begin with the initial creation of the vendor branch, and the import of the first vendor
drop. We'll call our vendor branch directory libcomplex, and our code drops will go into a subdirectory of our vendor branch called current. And since svn import creates all the intermediate parent directories it needs, we can actually accomplish both of these steps with a single command.
$ svn import /path/to/libcomplex-1.0 \
http://svn.example.com/repos/vendor/libcomplex/current \
-m 'importing initial 1.0 vendor drop'
…
We now have the current version of the libcomplex source code in /
vendor/libcomplex/current. Now, we tag that version (see the section called “Tags”) and then
copy it into the main development branch. Our copy will create a new directory called libcomplex in
our existing calc project directory. It is in this copied version of the vendor data that we will make our
customizations.
$ svn copy http://svn.example.com/repos/vendor/libcomplex/current
http://svn.example.com/repos/vendor/libcomplex/1.0
-m 'tagging libcomplex-1.0'
…
$ svn copy http://svn.example.com/repos/vendor/libcomplex/1.0 \
http://svn.example.com/repos/calc/libcomplex
\
-m 'bringing libcomplex-1.0 into the main branch'
…
\
\
We check out our project's main branch—which now includes a copy of the first vendor drop—and we
get to work customizing the libcomplex code. Before we know it, our modified version of libcomplex is
now completely integrated into our calculator program. 11
A few weeks later, the developers of libcomplex release a new version of their library—version
1.1—which contains some features and functionality that we really want. We'd like to upgrade to this
new version, but without losing the customizations we made to the existing version. What we essentially
would like to do is to replace our current baseline version of libcomplex 1.0 with a copy of libcomplex
1.1, and then re-apply the custom modifications we previously made to that library to the new version.
But we actually approach the problem from the other direction, applying the changes made to libcomplex between versions 1.0 and 1.1 to our modified copy of it.
11
And entirely bug-free, of course!
155
Advanced Topics
To perform this upgrade, we checkout a copy of our vendor branch, and replace the code in the current directory with the new libcomplex 1.1 source code. We quite literally copy new files on top of existing files, perhaps exploding the libcomplex 1.1 release tarball atop our existing files and directories.
The goal here is to make our current directory contain only the libcomplex 1.1 code, and to ensure
that all that code is under version control. Oh, and we want to do this with as little version control history disturbance as possible.
After replacing the 1.0 code with 1.1 code, svn status will show files with local modifications as well
as, perhaps, some unversioned or missing files. If we did what we were supposed to do, the unversioned
files are only those new files introduced in the 1.1 release of libcomplex—we run svn add on those to
get them under version control. The missing files are files that were in 1.0 but not in 1.1, and on those
paths we run svn delete. Finally, once our current working copy contains only the libcomplex 1.1
code, we commit the changes we made to get it looking that way.
Our current branch now contains the new vendor drop. We tag the new version (in the same way we
previously tagged the version 1.0 vendor drop), and then merge the differences between the tag of the
previous version and the new current version into our main development branch.
$ cd working-copies/calc
$ svn merge http://svn.example.com/repos/vendor/libcomplex/1.0
\
http://svn.example.com/repos/vendor/libcomplex/current \
libcomplex
… # resolve all the conflicts between their changes and our changes
$ svn commit -m 'merging libcomplex-1.1 into the main branch'
…
In the trivial use case, the new version of our third-party tool would look, from a files-and-directories
point of view, just like the previous version. None of the libcomplex source files would have been deleted, renamed or moved to different locations—the new version would contain only textual modifications against the previous one. In a perfect world, our modifications would apply cleanly to the new version of the library, with absolutely no complications or conflicts.
But things aren't always that simple, and in fact it is quite common for source files to get moved around
between releases of software. This complicates the process of ensuring that our modifications are still
valid for the new version of code, and can quickly degrade into a situation where we have to manually
recreate our customizations in the new version. Once Subversion knows about the history of a given
source file—including all its previous locations—the process of merging in the new version of the library is pretty simple. But we are responsible for telling Subversion how the source file layout changed
from vendor drop to vendor drop.
svn_load_dirs.pl
Vendor drops that contain more than a few deletes, additions and moves complicate the process of upgrading to each successive version of the third-party data. So Subversion supplies the svn_load_dirs.pl
script to assist with this process. This script automates the importing steps we mentioned in the general
vendor branch management procedure to make sure that mistakes are minimized. You will still be responsible for using the merge commands to merge the new versions of the third-party data into your
main development branch, but svn_load_dirs.pl can help you more quickly and easily arrive at that
stage.
In short, svn_load_dirs.pl is an enhancement to svn import that has several important characteristics:
• It can be run at any point in time to bring an existing directory in the repository to exactly match an
external directory, performing all the necessary adds and deletes, and optionally performing moves,
too.
156
Advanced Topics
• It takes care of complicated series of operations between which Subversion requires an intermediate
commit—such as before renaming a file or directory twice.
• It will optionally tag the newly imported directory.
• It will optionally add arbitrary properties to files and directories that match a regular expression.
svn_load_dirs.pl takes three mandatory arguments. The first argument is the URL to the base Subversion directory to work in. This argument is followed by the URL—relative to the first argument—into
which the current vendor drop will be imported. Finally, the third argument is the local directory to import. Using our previous example, a typical run of svn_load_dirs.pl might look like:
$ svn_load_dirs.pl http://svn.example.com/repos/vendor/libcomplex \
current
\
/path/to/libcomplex-1.1
…
You can indicate that you'd like svn_load_dirs.pl to tag the new vendor drop by passing the -t command-line option and specifying a tag name. This tag is another URL relative to the first program argument.
$ svn_load_dirs.pl -t libcomplex-1.1
\
http://svn.example.com/repos/vendor/libcomplex \
current
\
/path/to/libcomplex-1.1
…
When you run svn_load_dirs.pl, it examines the contents of your existing “current” vendor drop, and
compares them with the proposed new vendor drop. In the trivial case, there will be no files that are in
one version and not the other, and the script will perform the new import without incident. If, however,
there are discrepancies in the file layouts between versions, svn_load_dirs.pl will prompt you for how
you would like to resolve those differences. For example, you will have the opportunity to tell the script
that you know that the file math.c in version 1.0 of libcomplex was renamed to arithmetic.c in
libcomplex 1.1. Any discrepancies not explained by moves are treated as regular additions and deletions.
The script also accepts a separate configuration file for setting properties on files and directories matching a regular expression that are added to the repository. This configuration file is specified to
svn_load_dirs.pl using the -p command-line option. Each line of the configuration file is a whitespacedelimited set of two or four values: a Perl-style regular expression to match the added path against, a
control keyword (either break or cont), and then optionally a property name and value.
\.png$
\.jpe?g$
\.m3u$
\.m3u$
.*
break
break
cont
break
break
svn:mime-type
svn:mime-type
svn:mime-type
svn:eol-style
svn:eol-style
image/png
image/jpeg
audio/x-mpegurl
LF
native
For each added path, the configured property changes whose regular expression matches the path are applied in order, unless the control specification is break (which means that no more property changes
should be applied to that path). If the control specification is cont—an abbreviation for
continue—then matching will continue with the next line of the configuration file.
Any whitespace in the regular expression, property name, or property value must be surrounded by
either single or double quote characters. You can escape quote characters that are not used for wrapping
157
Advanced Topics
whitespace by preceding them with a backslash (\) character. The backslash escapes only quotes when
parsing the configuration file, so do not protect any other characters beyond what is necessary for the
regular expression.
Localization
Localization is the act of making programs behave in a region-specific way. When a program formats
numbers or dates in a way specific to your part of the world, or prints messages (or accepts input) in
your native language, the program is said to be localized. This section describes steps Subversion has
made towards localization.
Understanding locales
Most modern operating systems have a notion of the “current locale”—that is, the region or country
whose localization conventions are honored. These conventions—typically chosen by some runtime
configuration mechanism on the computer—affect the way in which programs present data to the user,
as well as the way in which they accept user input.
On Unix-like systems, you can check the values of the locale-related runtime configuration options by
running the locale command:
$ locale
LANG=
LC_COLLATE="C"
LC_CTYPE="C"
LC_MESSAGES="C"
LC_MONETARY="C"
LC_NUMERIC="C"
LC_TIME="C"
LC_ALL="C"
The output is a list of locale-related environment variables and their current values. In this example, the
variables are all set to the default C locale, but users can set these variables to specific country/language
code combinations. For example, if one were to set the LC_TIME variable to fr_CA, then programs
would know to present time and date information formatted according a French-speaking Canadian's expectations. And if one were to set the LC_MESSAGES variable to zh_TW, then programs would know to
present human-readable messages in Traditional Chinese. Setting the LC_ALL variable has the effect of
changing every locale variable to the same value. The value of LANG is used as a default value for any
locale variable that is unset. To see the list of available locales on a Unix system, run the command locale -a.
On Windows, locale configuration is done via the “Regional and Language Options” control panel item.
There you can view and select the values of individual settings from the available locales, and even customize (at a sickening level of detail) several of the display formatting conventions.
Subversion's use of locales
The Subversion client, svn, honors the current locale configuration in two ways. First, it notices the
value of the LC_MESSAGES variable and attempts to print all messages in the specified language. For
example:
$ export LC_MESSAGES=de_DE
$ svn help cat
cat: Gibt den Inhalt der angegebenen Dateien oder URLs aus.
158
Advanced Topics
Aufruf: cat ZIEL[@REV]...
…
This behavior works identically on both Unix and Windows systems. Note, though, that while your operating system might have support for a certain locale, the Subversion client still may not be able to
speak the particular language. In order to produce localized messages, human volunteers must provide
translations for each language. The translations are written using the GNU gettext package, which results in translation modules that end with the .mo filename extension. For example, the German translation file is named de.mo. These translation files are installed somewhere on your system. On Unix,
they typically live in /usr/share/locale/, while on Windows they're often found in the
\share\locale\ folder in Subversion's installation area. Once installed, a module is named after the
program it provides translations for. For example, the de.mo file may ultimately end up installed as /
usr/share/locale/de/LC_MESSAGES/subversion.mo. By browsing the installed .mo
files, you can see which languages the Subversion client is able to speak.
The second way in which the locale is honored involves how svn interprets your input. The repository
stores all paths, filenames, and log messages in Unicode, encoded as UTF-8. In that sense, the repository
is internationalized—that is, the repository is ready to accept input in any human language. This means,
however, that the Subversion client is responsible for sending only UTF-8 filenames and log messages
into the repository. In order to do this, it must convert the data from the native locale into UTF-8.
For example, suppose you create a file namedcaffè.txt, and then when committing the file, you
write the log message as “Adesso il caffè è più forte”. Both the filename and log message contain nonASCII characters, but because your locale is set to it_IT, the Subversion client knows to interpret
them as Italian. It uses an Italian character set to convert the data to UTF-8 before sending them off to
the repository.
Note that while the repository demands UTF-8 filenames and log messages, it does not pay attention to
file contents. Subversion treats file contents as opaque strings of bytes, and neither client nor server
makes an attempt to understand the character set or encoding of the contents.
Character set conversion errors
While using Subversion, you might get hit with an error related to character set conversions:
svn: Can't convert string from native encoding to 'UTF-8':
…
svn: Can't convert string from 'UTF-8' to native encoding:
…
Errors like this typically occur when the Subversion client has received a UTF-8 string from the
repository, but not all of the characters in that string can be represented using the encoding of the
current locale. For example, if your locale is en_US but a collaborator has committed a Japanese
filename, you're likely to see this error when you receive the file during an svn update.
The solution is either to set your locale to something which can represent the incoming UTF-8
data, or to change the filename or log message in the repository. (And don't forget to slap your
collaborator's hand—projects should decide on common languages ahead of time, so that all participants are using the same locale.)
Using External Differencing Tools
The presence of --diff-cmd and --diff3-cmd options, and similarly named runtime configura159
Advanced Topics
tion parameters (see the section called “Config”), can lead to a false notion of how easy it is to use external differencing (or “diff”) and merge tools with Subversion. While Subversion can use most of popular such tools available, the effort invested in setting this up often turns out to be non-trivial.
The interface between Subversion and external diff and merge tools harkens back to a time when Subversion's only contextual differencing capabilities were built around invocations of the GNU diffutils
toolchain, specifically the diff and diff3 utilities. To get the kind of behavior Subversion needed, it
called these utilities with more than a handful of options and parameters, most of which were quite specific to the utilities. Some time later, Subversion grew its own internal differencing library, and as a failover mechanism, 12 the --diff-cmd and --diff3-cmd options were added to the Subversion command-line client so users could more easily indicate that they preferred to use the GNU diff and diff3
utilities instead of the newfangled internal diff library. If those options were used, Subversion would
simply ignore the internal diff library, and fall back to running those external programs, lengthy argument lists and all. And that's where things remain today.
It didn't take long for folks to realize that having such easy configuration mechanisms for specifying that
Subversion should use the external GNU diff and diff3 utilities located at a particular place on the system could be applied toward the use of other diff and merge tools, too. After all, Subversion didn't actually verify that the things it was being told to run were members of the GNU diffutils toolchain. But the
only configurable aspect of using those external tools is their location on the system—not the option set,
parameter order, etc. Subversion continues throwing all those GNU utility options at your external diff
tool regardless of whether or not that program can understand those options. And that's where things get
unintuitive for most users.
The key to using external diff and merge tools (other than GNU diff and diff3, of course) with Subversion is to use wrapper scripts which convert the input from Subversion into something that your differencing tool can understand, and then to convert the output of your tool back into a format which Subversion expects—the format that the GNU tools would have used. The following sections cover the specifics of those expectations.
Note
The decision on when to fire off a contextual diff or merge as part of a larger Subversion
operation is made entirely by Subversion, and is affected by, among other things, whether
or not the files being operated on are human-readable as determined by their
svn:mime-type property. This means, for example, that even if you had the niftiest Microsoft Word-aware differencing or merging tool in the Universe, it would never be invoked by Subversion so long as your versioned Word documents had a configured MIME
type that denoted that they were not human-readable (such as application/msword).
For more about MIME type settings, see the section called “svn:mime-type”
External diff
Subversion calls external diff programs with parameters suitable for the GNU diff utility, and expects
only that the external program return with a successful error code. For most alternative diff program,
only the sixth and seventh arguments, the paths of the files which represent the left and right sides of the
diff, respectively, are of interest. Note that Subversion runs the diff program once per modified file
covered by the Subversion operation, so if your program runs in an asynchronous fashion (or
“backgrounded”), you might have several instances of it all running simultaneously. Finally, Subversion
expects that your program return an errorcode of 1 if your program detected differences, or 0 if it did
not—any other errorcode is considered a fatal error. 13
Example 7.2, “diffwrap.sh” and Example 7.3, “diffwrap.bat” are templates for external diff tool wrappers in the Bourne shell and Windows batch scripting languages, respectively.
12
Subversion
13
developers are good, but even the best make mistakes.
The GNU diff manual page puts it this way: “An exit status of 0 means no differences were found, 1 means some differences
were found, and 2 means trouble.”
160
Advanced Topics
Example 7.2. diffwrap.sh
#!/bin/sh
# Configure your favorite diff program here.
DIFF="/usr/local/bin/my-diff-tool"
# Subversion provides the paths we need as the sixth and seventh
# parameters.
LEFT=${6}
RIGHT=${7}
# Call the diff command (change the following line to make sense for
# your merge program).
$DIFF --left $LEFT --right $RIGHT
# Return an errorcode of 0 if no differences were detected, 1 if some were.
# Any other errorcode will be treated as fatal.
Example 7.3. diffwrap.bat
@ECHO OFF
REM Configure your favorite diff program here.
SET DIFF="C:\Program Files\Funky Stuff\My Diff Tool.exe"
REM
REM
SET
SET
Subversion provides the paths we need as the sixth and seventh
parameters.
LEFT=%6
RIGHT=%7
REM Call the diff command (change the following line to make sense for
REM your merge program).
%DIFF% --left %LEFT% --right %RIGHT%
REM Return an errorcode of 0 if no differences were detected, 1 if some were.
REM Any other errorcode will be treated as fatal.
External diff3
Subversion calls external merge programs with parameters suitable for the GNU diff3 utility, expecting
that the external program return with a successful error code and that the full file contents which result
from the completed merge operation are printed on the standard output stream (so that Subversion can
redirect them into the appropriate version controlled file). For most alternative merge programs, only the
ninth, tenth, and eleventh arguments, the paths of the files which represent the “mine”, “older”, and
“yours” inputs, respectively, are of interest. Note that because Subversion depends on the output of your
merge program, you wrapper script must not exit before that output has been delivered to Subversion.
When it finally does exit, it should return an errorcode of 0 if the merge was successful, or 1 if unresolved conflicts remain in the output—any other errorcode is considered a fatal error.
Example 7.4, “diff3wrap.sh” and Example 7.5, “diff3wrap.bat” are templates for external merge tool
161
Advanced Topics
wrappers in the Bourne shell and Windows batch scripting languages, respectively.
Example 7.4. diff3wrap.sh
#!/bin/sh
# Configure your favorite diff3/merge program here.
DIFF3="/usr/local/bin/my-merge-tool"
# Subversion provides the paths we need as the ninth, tenth, and eleventh
# parameters.
MINE=${9}
OLDER=${10}
YOURS=${11}
# Call the merge command (change the following line to make sense for
# your merge program).
$DIFF3 --older $OLDER --mine $MINE --yours $YOURS
#
#
#
#
After performing the merge, this script needs to print the contents
of the merged file to stdout. Do that in whatever way you see fit.
Return an errorcode of 0 on successful merge, 1 if unresolved conflicts
remain in the result. Any other errorcode will be treated as fatal.
Example 7.5. diff3wrap.bat
@ECHO OFF
REM Configure your favorite diff3/merge program here.
SET DIFF3="C:\Program Files\Funky Stuff\My Merge Tool.exe"
REM Subversion provides the paths we need as the ninth, tenth, and eleventh
REM parameters. But we only have access to nine parameters at a time, so we
REM shift our nine-parameter window twice to let us get to what we need.
SHIFT
SHIFT
SET MINE=%7
SET OLDER=%8
SET YOURS=%9
REM Call the merge command (change the following line to make sense for
REM your merge program).
%DIFF3% --older %OLDER% --mine %MINE% --yours %YOURS%
REM
REM
REM
REM
After performing the merge, this script needs to print the contents
of the merged file to stdout. Do that in whatever way you see fit.
Return an errorcode of 0 on successful merge, 1 if unresolved conflicts
remain in the result. Any other errorcode will be treated as fatal.
Subversion Repository URLs
As illustrated throughout this book, Subversion uses URLs to identify versioned resources in Subversion
repositories. For the most part, these URLs use the standard syntax, allowing for server names and port
162
Advanced Topics
numbers to be specified as part of the URL:
$ svn checkout http://svn.example.com:9834/repos
…
But there are some nuances in Subversion's handling of URLs that are notable. For example, URLs containing the file: access method (used for local repositories) must, in accordance with convention,
have either a server name of localhost or no server name at all:
$ svn checkout file:///path/to/repos
…
$ svn checkout file://localhost/path/to/repos
…
Also, users of the file: scheme on Windows platforms will need to use an unofficially “standard”
syntax for accessing repositories that are on the same machine, but on a different drive than the client's
current working drive. Either of the two following URL path syntaxes will work where X is the drive on
which the repository resides:
C:\> svn checkout file:///X:/path/to/repos
…
C:\> svn checkout "file:///X|/path/to/repos"
…
In the second syntax, you need to quote the URL so that the vertical bar character is not interpreted as a
pipe. Also, note that a URL uses ordinary slashes even though the native (non-URL) form of a path on
Windows uses backslashes.
Finally, it should be noted that the Subversion client will automatically encode URLs as necessary, just
like a web browser does. For example, if a URL contains a space or upper-ASCII character:
$ svn checkout "http://host/path with space/project/españa"
…then Subversion will escape the unsafe characters and behave as if you had typed:
$ svn checkout http://host/path%20with%20space/project/espa%C3%B1a
If the URL contains spaces, be sure to place it within quote marks, so that your shell treats the whole
thing as a single argument to the svn program.
163
Chapter 8. Developer Information
Subversion is an open-source software project developed under an Apache-style software license. The
project is financially backed by CollabNet, Inc., a California-based software development company. The
community that has formed around the development of Subversion always welcomes new members who
can donate their time and attention to the project. Volunteers are encouraged to assist in any way they
can, whether that means finding and diagnosing bugs, refining existing source code, or fleshing out
whole new features.
This chapter is for those who wish to assist in the continued evolution of Subversion by actually getting
their hands dirty with the source code. We will cover some of the software's more intimate details, the
kind of technical nitty-gritty that those developing Subversion itself—or writing entirely new tools
based on the Subversion libraries—should be aware of. If you don't foresee yourself participating with
the software at such a level, feel free to skip this chapter with confidence that your experience as a Subversion user will not be affected.
Layered Library Design
Subversion has a modular design, implemented as a collection of C libraries. Each library has a welldefined purpose and interface, and most modules are said to exist in one of three main layers—the Repository Layer, the Repository Access (RA) Layer, or the Client Layer. We will examine these layers
shortly, but first, see our brief inventory of Subversion's libraries in Table 8.1, “A Brief Inventory of the
Subversion Libraries”. For the sake of consistency, we will refer to the libraries by their extensionless
Unix library names (e.g.: libsvn_fs, libsvn_wc, mod_dav_svn).
Table 8.1. A Brief Inventory of the Subversion Libraries
Library
Description
libsvn_client
Primary interface for client programs
libsvn_delta
Tree and byte-stream differencing routines
libsvn_diff
Contextual differencing and merging routines
libsvn_fs
Filesystem commons and module loader
libsvn_fs_base
The Berkeley DB filesystem back-end
libsvn_fs_fs
The native filesystem (FSFS) back-end
libsvn_ra
Repository Access commons and module loader
libsvn_ra_dav
The WebDAV Repository Access module
libsvn_ra_local
The local Repository Access module
libsvn_ra_svn
The custom protocol Repository Access module
libsvn_repos
Repository interface
libsvn_subr
Miscellaneous helpful subroutines
libsvn_wc
The working copy management library
mod_authz_svn
Apache authorization module for Subversion repositories access via WebDAV
mod_dav_svn
Apache module for mapping WebDAV operations
to Subversion ones
The fact that the word “miscellaneous” only appears once in Table 8.1, “A Brief Inventory of the Sub164
Developer Information
version Libraries” is a good sign. The Subversion development team is serious about making sure that
functionality lives in the right layer and libraries. Perhaps the greatest advantage of the modular design
is its lack of complexity from a developer's point of view. As a developer, you can quickly formulate
that kind of “big picture” that allows you to pinpoint the location of certain pieces of functionality with
relative ease.
Another benefit of modularity is the ability to replace a given module with a whole new library that implements the same API without affecting the rest of the code base. In some sense, this happens within
Subversion already. The libsvn_ra_dav, libsvn_ra_local, and libsvn_ra_svn all implement the same interface. And all three communicate with the Repository Layer—libsvn_ra_dav and libsvn_ra_svn do so
across a network, and libsvn_ra_local connects to it directly. The libsvn_fs_base and libsvn_fs_fs libraries are another example of this.
The client itself also highlights modularity in the Subversion design. While Subversion itself comes with
only a command-line client program, there are several third party programs which provide various forms
of client GUI. These GUIs use the same APIs that the stock command-line client does. Subversion's
libsvn_client library is the one-stop shop for most of the functionality necessary for designing a working
Subversion client (see the section called “Client Layer”).
Repository Layer
When referring to Subversion's Repository Layer, we're generally talking about two libraries—the repository library, and the filesystem library. These libraries provide the storage and reporting mechanisms for the various revisions of your version-controlled data. This layer is connected to the Client Layer
via the Repository Access Layer, and is, from the perspective of the Subversion user, the stuff at the
“other end of the line.”
The Subversion Filesystem is accessed via the libsvn_fs API, and is not a kernel-level filesystem that
one would install in an operating system (like the Linux ext2 or NTFS), but a virtual filesystem. Rather
than storing “files” and “directories” as real files and directories (as in, the kind you can navigate
through using your favorite shell program), it uses one of two available abstract storage
backends—either a Berkeley DB database environment, or a flat-file representation. (To learn more
about the two repository back-ends, see the section called “Repository Data Stores”.) However, there
has been considerable interest by the development community in giving future releases of Subversion
the ability to use other back-end database systems, perhaps through a mechanism such as Open Database
Connectivity (ODBC).
The filesystem API exported by libsvn_fs contains the kinds of functionality you would expect from any
other filesystem API: you can create and remove files and directories, copy and move them around,
modify file contents, and so on. It also has features that are not quite as common, such as the ability to
add, modify, and remove metadata (“properties”) on each file or directory. Furthermore, the Subversion
Filesystem is a versioning filesystem, which means that as you make changes to your directory tree,
Subversion remembers what your tree looked like before those changes. And before the previous
changes. And the previous ones. And so on, all the way back through versioning time to (and just beyond) the moment you first started adding things to the filesystem.
All the modifications you make to your tree are done within the context of a Subversion transaction. The
following is a simplified general routine for modifying your filesystem:
1. Begin a Subversion transaction.
2. Make your changes (adds, deletes, property modifications, etc.).
3. Commit your transaction.
Once you have committed your transaction, your filesystem modifications are permanently stored as historical artifacts. Each of these cycles generates a single new revision of your tree, and each revision is
165
Developer Information
forever accessible as an immutable snapshot of “the way things were.”
The Transaction Distraction
The notion of a Subversion transaction, especially given its close proximity to the database code
in libsvn_fs, can become easily confused with the transaction support provided by the underlying
database itself. Both types of transaction exist to provide atomicity and isolation. In other words,
transactions give you the ability to perform a set of actions in an “all or nothing” fashion—either
all the actions in the set complete with success, or they all get treated as if none of them ever
happened—and in a way that does not interfere with other processes acting on the data.
Database transactions generally encompass small operations related specifically to the modification of data in the database itself (such as changing the contents of a table row). Subversion transactions are larger in scope, encompassing higher-level operations like making modifications to a
set of files and directories which are intended to be stored as the next revision of the filesystem
tree. If that isn't confusing enough, consider this: Subversion uses a database transaction during
the creation of a Subversion transaction (so that if the creation of Subversion transaction fails, the
database will look as if we had never attempted that creation in the first place)!
Fortunately for users of the filesystem API, the transaction support provided by the database system itself is hidden almost entirely from view (as should be expected from a properly modularized
library scheme). It is only when you start digging into the implementation of the filesystem itself
that such things become visible (or interesting).
Most of the functionality provided by the filesystem interface comes as an action that occurs on a
filesystem path. That is, from outside of the filesystem, the primary mechanism for describing and accessing the individual revisions of files and directories comes through the use of path strings like /
foo/bar, just as if you were addressing files and directories through your favorite shell program. You
add new files and directories by passing their paths-to-be to the right API functions. You query for information about them by the same mechanism.
Unlike most filesystems, though, a path alone is not enough information to identify a file or directory in
Subversion. Think of a directory tree as a two-dimensional system, where a node's siblings represent a
sort of left-and-right motion, and descending into subdirectories a downward motion. Figure 8.1, “Files
and directories in two dimensions” shows a typical representation of a tree as exactly that.
Figure 8.1. Files and directories in two dimensions
166
Developer Information
Of course, the Subversion filesystem has a nifty third dimension that most filesystems do not
have—Time! 1 In the filesystem interface, nearly every function that has a path argument also expects
a root argument. This svn_fs_root_t argument describes either a revision or a Subversion transaction
(which is usually just a revision-to-be), and provides that third-dimensional context needed to understand the difference between /foo/bar in revision 32, and the same path as it exists in revision 98.
Figure 8.2, “Versioning time—the third dimension!” shows revision history as an added dimension to
the Subversion filesystem universe.
Figure 8.2. Versioning time—the third dimension!
As we mentioned earlier, the libsvn_fs API looks and feels like any other filesystem, except that it has
this wonderful versioning capability. It was designed to be usable by any program interested in a versioning filesystem. Not coincidentally, Subversion itself is interested in that functionality. But while the
filesystem API should be sufficient for basic file and directory versioning support, Subversion wants
more—and that is where libsvn_repos comes in.
The Subversion repository library (libsvn_repos) is basically a wrapper library around the filesystem
functionality. This library is responsible for creating the repository layout, making sure that the underlying filesystem is initialized, and so on. Libsvn_repos also implements a set of hooks—scripts that are executed by the repository code when certain actions take place. These scripts are useful for notification,
authorization, or whatever purposes the repository administrator desires. This type of functionality, and
other utilities provided by the repository library, are not strictly related to implementing a versioning
filesystem, which is why it was placed into its own library.
Developers who wish to use the libsvn_repos API will find that it is not a complete wrapper around the
filesystem interface. That is, only certain major events in the general cycle of filesystem activity are
wrapped by the repository interface. Some of these include the creation and commit of Subversion transactions, and the modification of revision properties. These particular events are wrapped by the repository layer because they have hooks associated with them. In the future, other events may be wrapped by
the repository API. All of the remaining filesystem interaction will continue to occur directly via the
libsvn_fs API, though.
For example, here is a code segment that illustrates the use of both the repository and filesystem inter1
We understand that this may come as a shock to sci-fi fans who have long been under the impression that Time was actually the
fourth dimension, and we apologize for any emotional trauma induced by our assertion of a different theory.
167
Developer Information
faces to create a new revision of the filesystem in which a directory is added. Note that in this example
(and all others throughout this book), the SVN_ERR() macro simply checks for a non-successful error
return from the function it wraps, and returns that error if it exists.
Example 8.1. Using the Repository Layer
/* Create a new directory at the path NEW_DIRECTORY in the Subversion
repository located at REPOS_PATH. Perform all memory allocation in
POOL. This function will create a new revision for the addition of
NEW_DIRECTORY. */
static svn_error_t *
make_new_directory (const char *repos_path,
const char *new_directory,
apr_pool_t *pool)
{
svn_error_t *err;
svn_repos_t *repos;
svn_fs_t *fs;
svn_revnum_t youngest_rev;
svn_fs_txn_t *txn;
svn_fs_root_t *txn_root;
const char *conflict_str;
/* Open the repository located at REPOS_PATH. */
SVN_ERR (svn_repos_open (&repos, repos_path, pool));
/* Get a pointer to the filesystem object that is stored in
REPOS. */
fs = svn_repos_fs (repos);
/* Ask the filesystem to tell us the youngest revision that
currently exists. */
SVN_ERR (svn_fs_youngest_rev (&youngest_rev, fs, pool));
/* Begin a new transaction that is based on YOUNGEST_REV. We are
less likely to have our later commit rejected as conflicting if we
always try to make our changes against a copy of the latest snapshot
of the filesystem tree. */
SVN_ERR (svn_fs_begin_txn (&txn, fs, youngest_rev, pool));
/* Now that we have started a new Subversion transaction, get a root
object that represents that transaction. */
SVN_ERR (svn_fs_txn_root (&txn_root, txn, pool));
/* Create our new directory under the transaction root, at the path
NEW_DIRECTORY. */
SVN_ERR (svn_fs_make_dir (txn_root, new_directory, pool));
/* Commit the transaction, creating a new revision of the filesystem
which includes our added directory path. */
err = svn_repos_fs_commit_txn (&conflict_str, repos,
&youngest_rev, txn, pool);
if (! err)
{
/* No error? Excellent! Print a brief report of our success. */
printf ("Directory '%s' was successfully added as new revision "
"'%ld'.\n", new_directory, youngest_rev);
}
else if (err->apr_err == SVN_ERR_FS_CONFLICT)
{
168
Developer Information
/* Uh-oh. Our commit failed as the result of a conflict
(someone else seems to have made changes to the same area
of the filesystem that we tried to modify). Print an error
message. */
printf ("A conflict occurred at path '%s' while attempting "
"to add directory '%s' to the repository at '%s'.\n",
conflict_str, new_directory, repos_path);
}
else
{
/* Some other error has occurred. Print an error message. */
printf ("An error occurred while attempting to add directory '%s' "
"to the repository at '%s'.\n",
new_directory, repos_path);
}
/* Return the result of the attempted commit to our caller.
return err;
*/
}
In the previous code segment, calls were made to both the repository and filesystem interfaces. We
could just as easily have committed the transaction using svn_fs_commit_txn(). But the filesystem API knows nothing about the repository library's hook mechanism. If you want your Subversion repository to automatically perform some set of non-Subversion tasks every time you commit a transaction
(like, for example, sending an email that describes all the changes made in that transaction to your developer mailing list), you need to use the libsvn_repos-wrapped version of that
function—svn_repos_fs_commit_txn(). This function will actually first run the pre-commit
hook script if one exists, then commit the transaction, and finally will run a post-commit hook script.
The hooks provide a special kind of reporting mechanism that does not really belong in the core filesystem library itself. (For more information regarding Subversion's repository hooks, see the section called
“Hook Scripts”.)
The hook mechanism requirement is but one of the reasons for the abstraction of a separate repository
library from the rest of the filesystem code. The libsvn_repos API provides several other important utilities to Subversion. These include the abilities to:
1. create, open, destroy, and perform recovery steps on a Subversion repository and the filesystem included in that repository.
2. describe the differences between two filesystem trees.
3. query for the commit log messages associated with all (or some) of the revisions in which a set of
files was modified in the filesystem.
4. generate a human-readable “dump” of the filesystem, a complete representation of the revisions in the
filesystem.
5. parse that dump format, loading the dumped revisions into a different Subversion repository.
As Subversion continues to evolve, the repository library will grow with the filesystem library to offer
increased functionality and configurable option support.
Repository Access Layer
If the Subversion Repository Layer is at “the other end of the line”, the Repository Access Layer is the
line itself. Charged with marshalling data between the client libraries and the repository, this layer in169
Developer Information
cludes the libsvn_ra module loader library, the RA modules themselves (which currently includes libsvn_ra_dav, libsvn_ra_local, and libsvn_ra_svn), and any additional libraries needed by one or more of
those RA modules, such as the mod_dav_svn Apache module with which libsvn_ra_dav communicates
or libsvn_ra_svn's server, svnserve.
Since Subversion uses URLs to identify its repository resources, the protocol portion of the URL schema
(usually file:, http:, https:, or svn:) is used to determine which RA module will handle the
communications. Each module registers a list of the protocols it knows how to “speak” so that the RA
loader can, at runtime, determine which module to use for the task at hand. You can determine which
RA modules are available to the Subversion command-line client, and what protocols they claim to support, by running svn --version:
$ svn --version
svn, version 1.2.3 (r15833)
compiled Sep 13 2005, 22:45:22
Copyright (C) 2000-2005 CollabNet.
Subversion is open source software, see http://subversion.tigris.org/
This product includes software developed by CollabNet (http://www.Collab.Net/).
The following repository access (RA) modules are available:
* ra_dav : Module for accessing a repository via WebDAV (DeltaV) protocol.
- handles 'http' scheme
- handles 'https' scheme
* ra_svn : Module for accessing a repository using the svn network protocol.
- handles 'svn' scheme
* ra_local : Module for accessing a repository on local disk.
- handles 'file' scheme
RA-DAV (Repository Access Using HTTP/DAV)
The libsvn_ra_dav library is designed for use by clients that are being run on different machines than the
servers with which they communicating, specifically servers reached using URLs that contain the http: or https: protocol portions. To understand how this module works, we should first mention a
couple of other key components in this particular configuration of the Repository Access Layer—the
powerful Apache HTTP Server, and the Neon HTTP/WebDAV client library.
Subversion's primary network server is the Apache HTTP Server. Apache is a time-tested, extensible
open-source server process that is ready for serious use. It can sustain a high network load and runs on
many platforms. The Apache server supports a number of different standard authentication protocols,
and can be extended through the use of modules to support many others. It also supports optimizations
like network pipelining and caching. By using Apache as a server, Subversion gets all of these features
for free. And since most firewalls already allow HTTP traffic to pass through, system administrators
typically don't even have to change their firewall configurations to allow Subversion to work.
Subversion uses HTTP and WebDAV (with DeltaV) to communicate with an Apache server. You can
read more about this in the WebDAV section of this chapter, but in short, WebDAV and DeltaV are extensions to the standard HTTP 1.1 protocol that enable sharing and versioning of files over the web.
Apache 2.0 and later versions come with mod_dav, an Apache module that understands the DAV extensions to HTTP. Subversion itself supplies mod_dav_svn, though, which is another Apache module that
works in conjunction with (really, as a back-end to) mod_dav to provide Subversion's specific implementations of WebDAV and DeltaV.
When communicating with a repository over HTTP, the RA loader library chooses libsvn_ra_dav as the
proper access module. The Subversion client makes calls into the generic RA interface, and libsvn_ra_dav maps those calls (which embody rather large-scale Subversion actions) to a set of HTTP/
170
Developer Information
WebDAV requests. Using the Neon library, libsvn_ra_dav transmits those requests to the Apache server.
Apache receives these requests (exactly as it does generic HTTP requests that your web browser might
make), notices that the requests are directed at a URL that is configured as a DAV location (using the
<Location> directive in httpd.conf), and hands the request off to its own mod_dav module.
When properly configured, mod_dav knows to use Subversion's mod_dav_svn for any filesystem-related needs, as opposed to the generic mod_dav_fs that comes with Apache. So ultimately, the client is
communicating with mod_dav_svn, which binds directly to the Subversion Repository Layer.
That was a simplified description of the actual exchanges taking place, though. For example, the Subversion repository might be protected by Apache's authorization directives. This could result in initial attempts to communicate with the repository being rejected by Apache on authorization grounds. At this
point, libsvn_ra_dav gets back the notice from Apache that insufficient identification was supplied, and
calls back into the Client Layer to get some updated authentication data. If the data is supplied correctly,
and the user has the permissions that Apache seeks, libsvn_ra_dav's next automatic attempt at performing the original operation will be granted, and all will be well. If sufficient authentication information
cannot be supplied, the request will ultimately fail, and the client will report the failure to the user.
By using Neon and Apache, Subversion gets free functionality in several other complex areas, too. For
example, if Neon finds the OpenSSL libraries, it allows the Subversion client to attempt to use SSLencrypted communications with the Apache server (whose own mod_ssl can “speak the language”).
Also, both Neon itself and Apache's mod_deflate can understand the “deflate” algorithm (the same one
used by the PKZIP and gzip programs), so requests can be sent in smaller, compressed chunks across the
wire. Other complex features that Subversion hopes to support in the future include the ability to automatically handle server-specified redirects (for example, when a repository has been moved to a new canonical URL) and taking advantage of HTTP pipelining.
RA-SVN (Custom Protocol Repository Access)
In addition to the standard HTTP/WebDAV protocol, Subversion also provides an RA implementation
that uses a custom protocol. The libsvn_ra_svn module implements its own network socket connectivity,
and communicates with a stand-alone server—the svnserve program—on the machine that hosts the
repository. Clients access the repository using the svn:// schema.
This RA implementation lacks most of the advantages of Apache mentioned in the previous section;
however, it may be appealing to some system administrators nonetheless. It is dramatically easier to
configure and run; setting up an svnserve process is nearly instantaneous. It is also much smaller (in
terms of lines of code) than Apache, making it much easier to audit, for security reasons or otherwise.
Furthermore, some system administrators may already have an SSH security infrastructure in place, and
want Subversion to use it. Clients using ra_svn can easily tunnel the protocol over SSH.
RA-Local (Direct Repository Access)
Not all communications with a Subversion repository require a powerhouse server process and a network layer. For users who simply wish to access the repositories on their local disk, they may do so using file: URLs and the functionality provided by libsvn_ra_local. This RA module binds directly
with the repository and filesystem libraries, so no network communication is required at all.
Subversion requires that the server name included as part of the file: URL be either localhost or
empty, and that there be no port specification. In other words, your URLs should look like either
file://localhost/path/to/repos or file:///path/to/repos.
Also, be aware that Subversion's file: URLs cannot be used in a regular web browser the way typical
file: URLs can. When you attempt to view a file: URL in a regular web browser, it reads and displays the contents of the file at that location by examining the filesystem directly. However, Subversion's resources exist in a virtual filesystem (see the section called “Repository Layer”), and your
browser will not understand how to read that filesystem.
171
Developer Information
Your RA Library Here
For those who wish to access a Subversion repository using still another protocol, that is precisely why
the Repository Access Layer is modularized! Developers can simply write a new library that implements
the RA interface on one side and communicates with the repository on the other. Your new library can
use existing network protocols, or you can invent your own. You could use inter-process communication
(IPC) calls, or—let's get crazy, shall we?—you could even implement an email-based protocol. Subversion supplies the APIs; you supply the creativity.
Client Layer
On the client side, the Subversion working copy is where all the action takes place. The bulk of functionality implemented by the client-side libraries exists for the sole purpose of managing working copies—directories full of files and other subdirectories which serve as a sort of local, editable “reflection”
of one or more repository locations—and propagating changes to and from the Repository Access layer.
Subversion's working copy library, libsvn_wc, is directly responsible for managing the data in the working copies. To accomplish this, the library stores administrative information about each working copy
directory within a special subdirectory. This subdirectory, named .svn, is present in each working copy
directory and contains various other files and directories which record state and provide a private workspace for administrative action. For those familiar with CVS, this .svn subdirectory is similar in purpose to the CVS administrative directories found in CVS working copies. For more information about
the .svn administrative area, see the section called “Inside the Working Copy Administration Area”in
this chapter.
The Subversion client library, libsvn_client, has the broadest responsibility; its job is to mingle the functionality of the working copy library with that of the Repository Access Layer, and then to provide the
highest-level API to any application that wishes to perform general revision control actions. For example, the function svn_client_checkout() takes a URL as an argument. It passes this URL to
the RA layer and opens an authenticated session with a particular repository. It then asks the repository
for a certain tree, and sends this tree into the working copy library, which then writes a full working
copy to disk (.svn directories and all).
The client library is designed to be used by any application. While the Subversion source code includes
a standard command-line client, it should be very easy to write any number of GUI clients on top of the
client library. New GUIs (or any new client, really) for Subversion need not be clunky wrappers around
the included command-line client—they have full access via the libsvn_client API to same functionality,
data, and callback mechanisms that the command-line client uses.
Binding Directly—A Word About Correctness
Why should your GUI program bind directly with a libsvn_client instead of acting as a wrapper
around a command-line program? Besides simply being more efficient, this can address potential
correctness issues as well. A command-line program (like the one supplied with Subversion) that
binds to the client library needs to effectively translate feedback and requested data bits from C
types to some form of human-readable output. This type of translation can be lossy. That is, the
program may not display all of the information harvested from the API, or may combine bits of
information for compact representation.
If you wrap such a command-line program with yet another program, the second program has access only to already-interpreted (and as we mentioned, likely incomplete) information, which it
must again translate into its representation format. With each layer of wrapping, the integrity of
the original data is potentially tainted more and more, much like the result of making a copy of a
copy (of a copy …) of a favorite audio or video cassette.
172
Developer Information
Using the APIs
Developing applications against the Subversion library APIs is fairly straightforward. All of the public
header files live in the subversion/include directory of the source tree. These headers are copied
into your system locations when you build and install Subversion itself from source. These headers represent the entirety of the functions and types meant to be accessible by users of the Subversion libraries.
The first thing you might notice is that Subversion's datatypes and functions are namespace protected.
Every public Subversion symbol name begins with svn_, followed by a short code for the library in
which the symbol is defined (such as wc, client, fs, etc.), followed by a single underscore (_) and
then the rest of the symbol name. Semi-public functions (used among source files of a given library but
not by code outside that library, and found inside the library directories themselves) differ from this
naming scheme in that instead of a single underscore after the library code, they use a double underscore
(__). Functions that are private to a given source file have no special prefixing, and are declared static. Of course, a compiler isn't interested in these naming conventions, but they help to clarify the scope
of a given function or datatype.
The Apache Portable Runtime Library
Along with Subversion's own datatypes, you will see many references to datatypes that begin with
apr_—symbols from the Apache Portable Runtime (APR) library. APR is Apache's portability library,
originally carved out of its server code as an attempt to separate the OS-specific bits from the OSindependent portions of the code. The result was a library that provides a generic API for performing operations that differ mildly—or wildly—from OS to OS. While the Apache HTTP Server was obviously
the first user of the APR library, the Subversion developers immediately recognized the value of using
APR as well. This means that there are practically no OS-specific code portions in Subversion itself.
Also, it means that the Subversion client compiles and runs anywhere that the server does. Currently this
list includes all flavors of Unix, Win32, BeOS, OS/2, and Mac OS X.
In addition to providing consistent implementations of system calls that differ across operating systems,
2 APR gives Subversion immediate access to many custom datatypes, such as dynamic arrays and hash
tables. Subversion uses these types extensively throughout the codebase. But perhaps the most pervasive
APR datatype, found in nearly every Subversion API prototype, is the apr_pool_t—the APR memory
pool. Subversion uses pools internally for all its memory allocation needs (unless an external library requires a different memory management schema for data passed through its API), 3 and while a person
coding against the Subversion APIs is not required to do the same, they are required to provide pools to
the API functions that need them. This means that users of the Subversion API must also link against
APR, must call apr_initialize() to initialize the APR subsystem, and then must acquire a pool
for use with Subversion API calls. See the section called “Programming with Memory Pools” for more
information.
URL and Path Requirements
With remote version control operation as the whole point of Subversion's existence, it makes sense that
some attention has been paid to internationalization (i18n) support. After all, while “remote” might
mean “across the office”, it could just as well mean “across the globe.” To facilitate this, all of Subversion's public interfaces that accept path arguments expect those paths to be canonicalized, and encoded
in UTF-8. This means, for example, that any new client binary that drives the libsvn_client interface
needs to first convert paths from the locale-specific encoding to UTF-8 before passing those paths to the
Subversion libraries, and then re-convert any resultant output paths from Subversion back into the locale's encoding before using those paths for non-Subversion purposes. Fortunately, Subversion provides a
suite of functions (see subversion/include/svn_utf.h) that can be used by any program to do
these conversions.
2
Subversion
3
uses ANSI system calls and datatypes as much as possible.
Neon and Berkeley DB are examples of such libraries.
173
Developer Information
Also, Subversion APIs require all URL parameters to be properly URI-encoded. So, instead of passing
file:///home/username/My File.txt as the URL of a file named My File.txt, you need
to pass file:///home/username/My%20File.txt. Again, Subversion supplies helper functions
that
your
application
can
use—svn_path_uri_encode()
and
svn_path_uri_decode(), for URI encoding and decoding, respectively.
Using Languages Other than C and C++
If you are interested in using the Subversion libraries in conjunction with something other than a C program—say a Python or Perl script—Subversion has some support for this via the Simplified Wrapper
and Interface Generator (SWIG). The SWIG bindings for Subversion are located in subversion/bindings/swig and whilst still maturing, they are in a usable state. These bindings allow you to call Subversion API functions indirectly, using wrappers that translate the datatypes native to your scripting language into the datatypes needed by Subversion's C libraries.
There is an obvious benefit to accessing the Subversion APIs via a language binding—simplicity. Generally speaking, languages such as Python and Perl are much more flexible and easy to use than C or
C++. The sort of high-level datatypes and context-driven type checking provided by these languages are
often better at handling information that comes from users. As you know, humans are proficient at
botching up input to a program, and scripting languages tend to handle that misinformation more gracefully. Of course, often that flexibility comes at the cost of performance. That is why using a tightlyoptimized, C-based interface and library suite, combined with a powerful, flexible binding language, is
so appealing.
Let's look at a sample program that uses Subversion's Python SWIG bindings to recursively crawl the
youngest repository revision, and print the various paths reached during the crawl.
Example 8.2. Using the Repository Layer with Python
#!/usr/bin/python
"""Crawl a repository, printing versioned object path names."""
import sys
import os.path
import svn.fs, svn.core, svn.repos
def crawl_filesystem_dir(root, directory, pool):
"""Recursively crawl DIRECTORY under ROOT in the filesystem, and return
a list of all the paths at or below DIRECTORY. Use POOL for all
allocations."""
# Print the name of this path.
print directory + "/"
# Get the directory entries for DIRECTORY.
entries = svn.fs.svn_fs_dir_entries(root, directory, pool)
# Use an iteration subpool.
subpool = svn.core.svn_pool_create(pool)
# Loop over the entries.
names = entries.keys()
for name in names:
# Clear the iteration subpool.
svn.core.svn_pool_clear(subpool)
174
Developer Information
# Calculate the entry's full path.
full_path = directory + '/' + name
# If the entry is a directory, recurse. The recursion will return
# a list with the entry and all its children, which we will add to
# our running list of paths.
if svn.fs.svn_fs_is_dir(root, full_path, subpool):
crawl_filesystem_dir(root, full_path, subpool)
else:
# Else it's a file, so print its path here.
print full_path
# Destroy the iteration subpool.
svn.core.svn_pool_destroy(subpool)
def crawl_youngest(pool, repos_path):
"""Open the repository at REPOS_PATH, and recursively crawl its
youngest revision."""
# Open the repository at REPOS_PATH, and get a reference to its
# versioning filesystem.
repos_obj = svn.repos.svn_repos_open(repos_path, pool)
fs_obj = svn.repos.svn_repos_fs(repos_obj)
# Query the current youngest revision.
youngest_rev = svn.fs.svn_fs_youngest_rev(fs_obj, pool)
# Open a root object representing the youngest (HEAD) revision.
root_obj = svn.fs.svn_fs_revision_root(fs_obj, youngest_rev, pool)
# Do the recursive crawl.
crawl_filesystem_dir(root_obj, "", pool)
if __name__ == "__main__":
# Check for sane usage.
if len(sys.argv) != 2:
sys.stderr.write("Usage: %s REPOS_PATH\n"
% (os.path.basename(sys.argv[0])))
sys.exit(1)
# Canonicalize (enough for Subversion, at least) the repository path.
repos_path = os.path.normpath(sys.argv[1])
if repos_path == '.':
repos_path = ''
# Call the app-wrapper, which takes care of APR initialization/shutdown
# and the creation and cleanup of our top-level memory pool.
svn.core.run_app(crawl_youngest, repos_path)
This same program in C would need to deal with custom datatypes (such as those provided by the APR
library) for representing the hash of entries and the list of paths, but Python has hashes (called
“dictionaries”) and lists as built-in datatypes, and provides a rich collection of functions for operating on
those types. So SWIG (with the help of some customizations in Subversion's language bindings layer)
takes care of mapping those custom datatypes into the native datatypes of the target language. This
provides a more intuitive interface for users of that language.
The Subversion Python bindings can be used for working copy operations, too. In the previous section
of this chapter, we mentioned the libsvn_client interface, and how it exists for the sole purpose of
simplifying the process of writing a Subversion client. The following is a brief example of how that library can be accessed via the SWIG bindings to recreate a scaled-down version of the svn status command.
175
Developer Information
Example 8.3. A Python Status Crawler
#!/usr/bin/env python
"""Crawl a working copy directory, printing status information."""
import
import
import
import
sys
os.path
getopt
svn.core, svn.client, svn.wc
def generate_status_code(status):
"""Translate a status value into a single-character status code,
using the same logic as the Subversion command-line client."""
if status == svn.wc.svn_wc_status_none:
return ' '
if status == svn.wc.svn_wc_status_normal:
return ' '
if status == svn.wc.svn_wc_status_added:
return 'A'
if status == svn.wc.svn_wc_status_missing:
return '!'
if status == svn.wc.svn_wc_status_incomplete:
return '!'
if status == svn.wc.svn_wc_status_deleted:
return 'D'
if status == svn.wc.svn_wc_status_replaced:
return 'R'
if status == svn.wc.svn_wc_status_modified:
return 'M'
if status == svn.wc.svn_wc_status_merged:
return 'G'
if status == svn.wc.svn_wc_status_conflicted:
return 'C'
if status == svn.wc.svn_wc_status_obstructed:
return '~'
if status == svn.wc.svn_wc_status_ignored:
return 'I'
if status == svn.wc.svn_wc_status_external:
return 'X'
if status == svn.wc.svn_wc_status_unversioned:
return '?'
return '?'
def do_status(pool, wc_path, verbose):
# Calculate the length of the input working copy path.
wc_path_len = len(wc_path)
# Build a client context baton.
ctx = svn.client.svn_client_ctx_t()
def _status_callback(path, status, root_path_len=wc_path_len):
"""A callback function for svn_client_status."""
# Print the path, minus the bit that overlaps with the root of
# the status crawl
text_status = generate_status_code(status.text_status)
prop_status = generate_status_code(status.prop_status)
print '%s%s %s' % (text_status, prop_status, path[wc_path_len + 1:])
176
Developer Information
# Do the status crawl, using _status_callback() as our callback function.
svn.client.svn_client_status(wc_path, None, _status_callback,
1, verbose, 0, 0, ctx, pool)
def usage_and_exit(errorcode):
"""Print usage message, and exit with ERRORCODE."""
stream = errorcode and sys.stderr or sys.stdout
stream.write("""Usage: %s OPTIONS WC-PATH
Options:
--help, -h
: Show this usage message
--verbose, -v : Show all statuses, even uninteresting ones
""" % (os.path.basename(sys.argv[0])))
sys.exit(errorcode)
if __name__ == '__main__':
# Parse command-line options.
try:
opts, args = getopt.getopt(sys.argv[1:], "hv", ["help", "verbose"])
except getopt.GetoptError:
usage_and_exit(1)
verbose = 0
for opt, arg in opts:
if opt in ("-h", "--help"):
usage_and_exit(0)
if opt in ("-v", "--verbose"):
verbose = 1
if len(args) != 1:
usage_and_exit(2)
# Canonicalize (enough for Subversion, at least) the working copy path.
wc_path = os.path.normpath(args[0])
if wc_path == '.':
wc_path = ''
# Call the app-wrapper, which takes care of APR initialization/shutdown
# and the creation and cleanup of our top-level memory pool.
svn.core.run_app(do_status, wc_path, verbose)
Subversion's language bindings unfortunately tend to lack the level of attention given to the core Subversion modules. However, there have been significant efforts towards creating functional bindings for
Python, Perl, and Ruby. To some extent, the work done preparing the SWIG interface files for these languages is reusable in efforts to generate bindings for other languages supported by SWIG (which includes versions of C#, Guile, Java, MzScheme, OCaml, PHP, Tcl, and others). However, some extra
programming is required to compensate for complex APIs that SWIG needs some help interfacing with.
For more information on SWIG itself, see the project's website at http://www.swig.org/.
Inside the Working Copy Administration Area
As we mentioned earlier, each directory of a Subversion working copy contains a special subdirectory
called .svn which houses administrative data about that working copy directory. Subversion uses the
information in .svn to keep track of things like:
• Which repository location(s) are represented by the files and subdirectories in the working copy directory.
• What revision of each of those files and directories are currently present in the working copy.
• Any user-defined properties that might be attached to those files and directories.
177
Developer Information
• Pristine (un-edited) copies of the working copy files.
While there are several other bits of data stored in the .svn directory, we will examine only a couple of
the most important items.
The Entries File
Perhaps the single most important file in the .svn directory is the entries file. The entries file is an
XML document which contains the bulk of the administrative information about a versioned resource in
a working copy directory. It is this one file which tracks the repository URLs, pristine revision, file
checksums, pristine text and property timestamps, scheduling and conflict state information, last-known
commit information (author, revision, timestamp), local copy history—practically everything that a Subversion client is interested in knowing about a versioned (or to-be-versioned) resource!
Comparing the Administrative Areas of Subversion and CVS
A glance inside the typical .svn directory turns up a bit more than what CVS maintains in its
CVS administrative directories. The entries file contains XML which describes the current
state of the working copy directory, and basically serves the purposes of CVS's Entries, Root,
and Repository files combined.
The following is an example of an actual entries file:
Example 8.4. Contents of a Typical .svn/entries File
<?xml version="1.0" encoding="utf-8"?>
<wc-entries
xmlns="svn:">
<entry
committed-rev="1"
name=""
committed-date="2005-04-04T13:32:28.526873Z"
url="http://svn.red-bean.com/repos/greek-tree/A/D"
last-author="jrandom"
kind="dir"
uuid="4e820d15-a807-0410-81d5-aa59edf69161"
revision="1"/>
<entry
name="lambda"
copied="true"
kind="file"
copyfrom-rev="1"
schedule="add"
copyfrom-url="http://svn.red-bean.com/repos/greek-tree/A/B/lambda"/>
<entry
committed-rev="1"
name="gamma"
text-time="2005-12-11T16:32:46.000000Z"
committed-date="2005-04-04T13:32:28.526873Z"
checksum="ada10d942b1964d359e048dbacff3460"
last-author="jrandom"
kind="file"
prop-time="2005-12-11T16:32:45.000000Z"/>
<entry
178
Developer Information
name="zeta"
kind="file"
schedule="add"
revision="0"/>
<entry
name="G"
kind="dir"/>
<entry
name="H"
kind="dir"
schedule="delete"/>
</wc-entries>
As you can see, the entries file is essentially a list of entries. Each entry tag represents one of three
things: the working copy directory itself (called the “this directory” entry, and noted as having an empty
value for its name attribute), a file in that working copy directory (noted by having its kind attribute
set to "file"), or a subdirectory in that working copy (kind here is set to "dir"). The files and subdirectories whose entries are stored in this file are either already under version control, or (as in the case
of the file named zeta above) are scheduled to be added to version control when the user next commits
this working copy directory's changes. Each entry has a unique name, and each entry has a node kind.
Developers should be aware of some special rules that Subversion uses when reading and writing its
entries files. While each entry has a revision and URL associated with it, note that not every entry
tag in the sample file has explicit revision or url attributes attached to it. Subversion allows entries
to not explicitly store those two attributes when their values are the same as (in the revision case) or
trivially calculable from 4 (in the url case) the data stored in the “this directory” entry. Note also that
for subdirectory entries, Subversion stores only the crucial attributes—name, kind, url, revision, and
schedule. In an effort to reduce duplicated information, Subversion dictates that the method for determining the full set of information about a subdirectory is to traverse down into that subdirectory, and read
the “this directory” entry from its own .svn/entries file. However, a reference to the subdirectory
is kept in its parent's entries file, with enough information to permit basic versioning operations in
the event that the subdirectory itself is actually missing from disk.
Pristine Copies and Property Files
As mentioned before, the .svn directory also holds the pristine “text-base” versions of files. Those can
be found in .svn/text-base. The benefits of these pristine copies are multiple—network-free
checks for local modifications and difference reporting, network-free reversion of modified or missing
files, smaller transmission of changes to the server—but comes at the cost of having each versioned file
stored at least twice on disk. These days, this seems to be a negligible penalty for most files. However,
the situation gets uglier as the size of your versioned files grows. Some attention is being given to making the presence of the “text-base” an option. Ironically though, it is as your versioned files' sizes get larger that the existence of the “text-base” becomes more crucial—who wants to transmit a huge file across
a network just because they want to commit a tiny change to it?
Similar in purpose to the “text-base” files are the property files and their pristine “prop-base” copies,
located in .svn/props and .svn/prop-base respectively. Since directories can have properties,
too, there are also .svn/dir-props and .svn/dir-prop-base files. Each of these property files
(“working” and “base” versions) uses a simple “hash-on-disk” file format for storing the property names
and values.
WebDAV
4
That is, the URL for the entry is the same as the concatenation of the parent directory's URL and the entry's name.
179
Developer Information
WebDAV (shorthand for “Web-based Distributed Authoring and Versioning”) is an extension of the
standard HTTP protocol designed to make the web into a read/write medium, instead of the basically
read-only medium that exists today. The theory is that directories and files can be shared—as both readable and writable objects—over the web. RFCs 2518 and 3253 describe the WebDAV/DeltaV extensions to HTTP, and are available (along with a lot of other useful information) at http://www.webdav.org/.
A number of operating system file browsers are already able to mount networked directories using WebDAV. On Win32, the Windows Explorer can browse what it calls Web Folders (which are just WebDAV-ready network locations) as if they were regular shared folders. Mac OS X also has this capability,
as do the Nautilus and Konqueror browsers (under GNOME and KDE, respectively).
How does all of this apply to Subversion? The mod_dav_svn Apache module uses HTTP, extended by
WebDAV and DeltaV, as one of its network protocols. Subversion uses mod_dav_svn to map between
Subversion's versioning concepts and those of RFCs 2518 and 3253.
For a more thorough discussion of WebDAV, how it works, and how Subversion uses it, see Appendix B, WebDAV and Autoversioning. Among other things, that appendix discusses the degree to
which Subversion adheres to the generic WebDAV specification, and how that affects interoperability
with generic WebDAV clients.
Programming with Memory Pools
Almost every developer who has used the C programming language has at some point sighed at the
daunting task of managing memory usage. Allocating enough memory to use, keeping track of those allocations, freeing the memory when you no longer need it—these tasks can be quite complex. And of
course, failure to do those things properly can result in a program that crashes itself, or worse, crashes
the computer. Fortunately, the APR library that Subversion depends on for portability provides the
apr_pool_t type, which represents a pool from which the application may allocate memory.
A memory pool is an abstract representation of a chunk of memory allocated for use by a program.
Rather than requesting memory directly from the OS using the standard malloc() and friends, programs that link against APR can simply request that a pool of memory be created (using the
apr_pool_create() function). APR will allocate a moderately sized chunk of memory from the
OS, and that memory will be instantly available for use by the program. Any time the program needs
some of the pool memory, it uses one of the APR pool API functions, like apr_palloc(), which returns a generic memory location from the pool. The program can keep requesting bits and pieces of
memory from the pool, and APR will keep granting the requests. Pools will automatically grow in size
to accommodate programs that request more memory than the original pool contained, until of course
there is no more memory available on the system.
Now, if this were the end of the pool story, it would hardly have merited special attention. Fortunately,
that's not the case. Pools can not only be created; they can also be cleared and destroyed, using
apr_pool_clear() and apr_pool_destroy() respectively. This gives developers the flexibility to allocate several—or several thousand—things from the pool, and then clean up all of that memory
with a single function call! Further, pools have hierarchy. You can make “subpools” of any previously
created pool. When you clear a pool, all of its subpools are destroyed; if you destroy a pool, it and its
subpools are destroyed.
Before we go further, developers should be aware that they probably will not find many calls to the APR
pool functions we just mentioned in the Subversion source code. APR pools offer some extensibility
mechanisms, like the ability to have custom “user data” attached to the pool, and mechanisms for registering cleanup functions that get called when the pool is destroyed. Subversion makes use of these extensions in a somewhat non-trivial way. So, Subversion supplies (and most of its code uses) the wrapper
functions svn_pool_create(), svn_pool_clear(), and svn_pool_destroy().
While pools are helpful for basic memory management, the pool construct really shines in looping and
180
Developer Information
recursive scenarios. Since loops are often unbounded in their iterations, and recursions in their depth,
memory consumption in these areas of the code can become unpredictable. Fortunately, using nested
memory pools can be a great way to easily manage these potentially hairy situations. The following example demonstrates the basic use of nested pools in a situation that is fairly common—recursively
crawling a directory tree, doing some task to each thing in the tree.
Example 8.5. Effective Pool Usage
/* Recursively crawl over DIRECTORY, adding the paths of all its file
children to the FILES array, and doing some task to each path
encountered. Use POOL for the all temporary allocations, and store
the hash paths in the same pool as the hash itself is allocated in.
static apr_status_t
crawl_dir (apr_array_header_t *files,
const char *directory,
apr_pool_t *pool)
{
apr_pool_t *hash_pool = files->pool; /* array pool */
apr_pool_t *subpool = svn_pool_create (pool); /* iteration pool */
apr_dir_t *dir;
apr_finfo_t finfo;
apr_status_t apr_err;
apr_int32_t flags = APR_FINFO_TYPE | APR_FINFO_NAME;
apr_err = apr_dir_open (&dir, directory, pool);
if (apr_err)
return apr_err;
*/
/* Loop over the directory entries, clearing the subpool at the top of
each iteration. */
for (apr_err = apr_dir_read (&finfo, flags, dir);
apr_err == APR_SUCCESS;
apr_err = apr_dir_read (&finfo, flags, dir))
{
const char *child_path;
/* Clear the per-iteration SUBPOOL.
svn_pool_clear (subpool);
*/
/* Skip entries for "this dir" ('.') and its parent ('..'). */
if (finfo.filetype == APR_DIR)
{
if (finfo.name[0] == '.'
&& (finfo.name[1] == '\0'
|| (finfo.name[1] == '.' && finfo.name[2] == '\0')))
continue;
}
/* Build CHILD_PATH from DIRECTORY and FINFO.name. */
child_path = svn_path_join (directory, finfo.name, subpool);
/* Do some task to this encountered path. */
do_some_task (child_path, subpool);
/* Handle subdirectories by recursing into them, passing SUBPOOL
as the pool for temporary allocations. */
if (finfo.filetype == APR_DIR)
{
apr_err = crawl_dir (files, child_path, subpool);
if (apr_err)
181
Developer Information
return apr_err;
}
/* Handle files by adding their paths to the FILES array. */
else if (finfo.filetype == APR_REG)
{
/* Copy the file's path into the FILES array's pool. */
child_path = apr_pstrdup (hash_pool, child_path);
/* Add the path to the array. */
(*((const char **) apr_array_push (files))) = child_path;
}
}
/* Destroy SUBPOOL. */
svn_pool_destroy (subpool);
/* Check that the loop exited cleanly. */
if (apr_err)
return apr_err;
/* Yes, it exited cleanly, so close the dir. */
apr_err = apr_dir_close (dir);
if (apr_err)
return apr_err;
return APR_SUCCESS;
}
The previous example demonstrates effective pool usage in both looping and recursive situations. Each
recursion begins by making a subpool of the pool passed to the function. This subpool is used for the
looping region, and cleared with each iteration. The result is memory usage is roughly proportional to
the depth of the recursion, not to total number of file and directories present as children of the top-level
directory. When the first call to this recursive function finally finishes, there is actually very little data
stored in the pool that was passed to it. Now imagine the extra complexity that would be present if this
function had to alloc() and free() every single piece of data used!
Pools might not be ideal for every application, but they are extremely useful in Subversion. As a Subversion developer, you'll need to grow comfortable with pools and how to wield them correctly. Memory
usage bugs and bloating can be difficult to diagnose and fix regardless of the API, but the pool construct
provided by APR has proven a tremendously convenient, time-saving bit of functionality.
Contributing to Subversion
The official source of information about the Subversion project is, of course, the project's website at http://subversion.tigris.org/. There you can find information about getting access to the source code and
participating on the discussion lists. The Subversion community always welcomes new members. If you
are interested in participating in this community by contributing changes to the source code, here are
some hints on how to get started.
Join the Community
The first step in community participation is to find a way to stay on top of the latest happenings. To do
this most effectively, you will want to subscribe to the main developer discussion list
(<dev@subversion.tigris.org>)
and
commit
mail
list
(<svn@subversion.tigris.org>). By following these lists even loosely, you will have access to
important design discussions, be able to see actual changes to Subversion source code as they occur, and
182
Developer Information
be able to witness peer reviews of those changes and proposed changes. These email based discussion
lists are the primary communication media for Subversion development. See the Mailing Lists section of
the website for other Subversion-related lists you might be interested in.
But how do you know what needs to be done? It is quite common for a programmer to have the greatest
intentions of helping out with the development, yet be unable to find a good starting point. After all, not
many folks come to the community having already decided on a particular itch they would like to
scratch. But by watching the developer discussion lists, you might see mentions of existing bugs or feature requests fly by that particularly interest you. Also, a great place to look for outstanding, unclaimed
tasks is the Issue Tracking database on the Subversion website. There you will find the current list of
known bugs and feature requests. If you want to start with something small, look for issues marked as
“bite-sized”.
Get the Source Code
To edit the code, you need to have the code. This means you need to check out a working copy from the
public Subversion source repository. As straightforward as that might sound, the task can be slightly
tricky. Because Subversion's source code is versioned using Subversion itself, you actually need to
“bootstrap” by getting a working Subversion client via some other method. The most common methods
include downloading the latest binary distribution (if such is available for your platform), or downloading the latest source tarball and building your own Subversion client. If you build from source, make
sure to read the INSTALL file in the top level of the source tree for instructions.
After you have a working Subversion client, you are now poised to checkout a working copy of the Subversion source repository from http://svn.collab.net/repos/svn/trunk/: 5
$ svn checkout http://svn.collab.net/repos/svn/trunk subversion
A
subversion/HACKING
A
subversion/INSTALL
A
subversion/README
A
subversion/autogen.sh
A
subversion/build.conf
…
The above command will checkout the bleeding-edge, latest version of the Subversion source code into
a subdirectory named subversion in your current working directory. Obviously, you can adjust that
last argument as you see fit. Regardless of what you call the new working copy directory, though, after
this operation completes, you will now have the Subversion source code. Of course, you will still need
to fetch a few helper libraries (apr, apr-util, etc.)—see the INSTALL file in the top level of the working
copy for details.
Become Familiar with Community Policies
Now that you have a working copy containing the latest Subversion source code, you will most certainly
want to take a cruise through the “Hacker's Guide to Subversion”, which is available either as the www/
hacking.html file in the working copy, or on the Subversion website at http://subversion.tigris.org/hacking.html. This guide contains general instructions for contributing to Subversion, including how to properly format your source code for consistency with the rest of the codebase, how to describe your proposed changes with an effective change log message, how to test your
changes, and so on. Commit privileges on the Subversion source repository are earned—a government
by meritocracy. 6 The “Hacker's Guide” is an invaluable resource when it comes to making sure that
5
Note that the URL checked out in the example above ends not with svn, but with a subdirectory thereof called trunk. See our
discussion of Subversion's branching and tagging model for the reasoning behind this.
6
While this may superficially appear as some sort of elitism, this “earn your commit privileges” notion is about efficiency—whether it costs more in time and effort to review and apply someone else's changes that are likely to be safe and useful,
versus the potential costs of undoing changes that are dangerous.
183
Developer Information
your proposed changes earn the praises they deserve without being rejected on technicalities.
Make and Test Your Changes
With the code and community policy understanding in hand, you are ready to make your changes. It is
best to try to make smaller but related sets of changes, even tackling larger tasks in stages, instead of
making huge, sweeping modifications. Your proposed changes will be easier to understand (and therefore easier to review) if you disturb the fewest lines of code possible to accomplish your task properly.
After making each set of proposed changes, your Subversion tree should be in a state in which the software compiles with no warnings.
Subversion has a fairly thorough 7 regression test suite, and your proposed changes are expected to not
cause any of those tests to fail. By running make check (in Unix) from the top of the source tree, you
can sanity-check your changes. The fastest way to get your code contributions rejected (other than failing to supply a good log message) is to submit changes that cause failure in the test suite.
In the best-case scenario, you will have actually added appropriate tests to that test suite which verify
that your proposed changes work as expected. In fact, sometimes the best contribution a person can
make is solely the addition of new tests. You can write regression tests for functionality that currently
works in Subversion as a way to protect against future changes that might trigger failure in those areas.
Also, you can write new tests that demonstrate known failures. For this purpose, the Subversion test
suite allows you to specify that a given test is expected to fail (called an XFAIL), and so long as Subversion fails in the way that was expected, a test result of XFAIL itself is considered a success. Ultimately,
the better the test suite, the less time wasted on diagnosing potentially obscure regression bugs.
Donate Your Changes
After making your modifications to the source code, compose a clear and concise log message to describe those changes and the reasons for them. Then, send an email to the developers list containing your
log message and the output of svn diff (from the top of your Subversion working copy). If the community members consider your changes acceptable, someone who has commit privileges (permission to
make new revisions in the Subversion source repository) will add your changes to the public source code
tree. Recall that permission to directly commit changes to the repository is granted on merit—if you
demonstrate comprehension of Subversion, programming competency, and a “team spirit”, you will
likely be awarded that permission.
7
You might want to grab some popcorn. “Thorough”, in this instance, translates to somewhere in the neighborhood of thirty
minutes of non-interactive machine churn.
184
Chapter 9. Subversion Complete
Reference
This chapter is intended to be a complete reference to using Subversion. This includes the command line
client (svn) and all its subcommands, as well as the repository administration programs (svnadmin and
svnlook) and their respective subcommands.
The Subversion Command Line Client: svn
To use the command line client, you type svn, the subcommand you wish to use 1, and any switches or
targets that you wish to operate on—there is no specific order that the subcommand and the switches
must appear in. For example, all of the following are valid ways to use svn status:
$ svn -v status
$ svn status -v
$ svn status -v myfile
You can find many more examples of how to use most client commands in Chapter 3, Guided Tour and
commands for managing properties in the section called “Properties”.
svn Switches
While Subversion has different switches for its subcommands, all switches are global—that is, each
switch is guaranteed to mean the same thing regardless of the subcommand you use it with. For example, --verbose (-v) always means “verbose output”, regardless of the subcommand you use it
with.
--auto-props
Enables auto-props, overriding the enable-auto-props directive in the config file.
--config-dir DIR
Instructs Subversion to read configuration information from the specified directory instead of the
default location (.subversion in the user's home directory).
--diff-cmd CMD
Specifies an external program to use to show differences between files. When svn diff is invoked, it
uses Subversion's internal diff engine, which provides unified diffs by default. If you want to use an
external diff program, use --diff-cmd. You can pass switches to the diff program with the -extensions switch (more on that later in this section).
--diff3-cmd CMD
Specifies an external program to use to merge files.
--dry-run
Goes through all the motions of running a command, but makes no actual changes—either on disk
or in the repository.
--editor-cmd CMD
Specifies an external program to use to edit a log message or a property value. See the editor1
Yes, yes, you don't need a subcommand to use the --version switch, but we'll get to that in just a minute.
185
Subversion Complete Reference
cmd section in the section called “Config” for ways to specify a default editor.
--encoding ENC
Tells Subversion that your commit message is encoded in the charset provided. The default is your
operating system's native locale, and you should specify the encoding if your commit message is in
any other encoding.
--extensions (-x) ARGS
Specifies an argument or arguments that Subversion should pass to an external diff command when
providing differences between files. If you wish to pass multiple arguments, you must enclose all of
them in quotes (for example, svn diff --diff-cmd /usr/bin/diff -x "-b -E"). This switch can only be
used if you also pass the --diff-cmd switch.
--file (-F) FILENAME
Uses the contents of the file passed as an argument to this switch for the specified subcommand.
--force
Forces a particular command or operation to run. There are some operations that Subversion will
prevent you from doing in normal usage, but you can pass the force switch to tell Subversion “I
know what I'm doing as well as the possible repercussions of doing it, so let me at 'em”. This switch
is the programmatic equivalent of doing your own electrical work with the power on—if you don't
know what you're doing, you're likely to get a nasty shock.
--force-log
Forces a suspicious parameter passed to the --message (-m) or --file (-F) options to be accepted as valid. By default, Subversion will produce an error if parameters to these options look like
they might instead be targets of the subcommand. For example, if you pass a versioned file's path to
the --file (-F) option, Subversion will assume you've made a mistake, that the path was instead
intended as the target of the operation, and that you simply failed to provide some other—unversioned—file as the source of your log message. To assert your intent and override these
types of errors, pass the --force-log option to subcommands that accept log messages.
--help (-h or -?)
If used with one or more subcommands, shows the built-in help text for each subcommand. If used
alone, it displays the general client help text.
--ignore-ancestry
Tells Subversion to ignore ancestry when calculating differences (rely on path contents alone).
--ignore-externals
Tells Subversion to ignore external definitions and the external working copies managed by them.
--incremental
Prints output in a format suitable for concatenation.
--limit NUM
Show only the first NUM log messages.
--message (-m) MESSAGE
Indicates that you will specify a commit message on the command line, following this switch. For
example:
$ svn commit -m "They don't make Sunday."
--new ARG
Uses ARG as the newer target.
--no-auth-cache
186
Subversion Complete Reference
Prevents caching of authentication information (e.g. username and password) in the Subversion administrative directories.
--no-auto-props
Disables auto-props, overriding the enable-auto-props directive in the config file.
--no-diff-added
Prevents Subversion from printing differences for added files. The default behavior when you add a
file is for svn diff to print the same differences that you would see if you had added the entire contents of an existing (empty) file.
--no-diff-deleted
Prevents Subversion from printing differences for deleted files. The default behavior when you remove a file is for svn diff to print the same differences that you would see if you had left the file but
removed all the content.
--no-ignore
Shows files in the status listing that would normally be omitted since they match a pattern in the
global-ignores configuration option or the svn:ignore property. See the section called
“Config” and the section called “svn:ignore” for more information.
--no-unlock
Don't automatically unlock files (the default commit behavior is to unlock all files listed as part of
the commit). See the section called “Locking” for more information.
--non-interactive
In the case of an authentication failure, or insufficient credentials, prevents prompting for credentials (e.g. username or password). This is useful if you're running Subversion inside of an automated
script and it's more appropriate to have Subversion fail than to prompt for more information.
--non-recursive (-N)
Stops a subcommand from recursing into subdirectories. Most subcommands recurse by default, but
some subcommands—usually those that have the potential to remove or undo your local modifications—do not.
--notice-ancestry
Pay attention to ancestry when calculating differences.
--old ARG
Uses ARG as the older target.
--password PASS
Indicates that you are providing your password for authentication on the command line—otherwise,
if it is needed, Subversion will prompt you for it.
--quiet (-q)
Requests that the client print only essential information while performing an operation.
--recursive (-R)
Makes a subcommand recurse into subdirectories. Most subcommands recurse by default.
--relocate FROM TO [PATH...]
Used with the svn switch subcommand, changes the location of the repository that your working
copy references. This is useful if the location of your repository changes and you have an existing
working copy that you'd like to continue to use. See svn switch for an example.
--revision (-r) REV
Indicates that you're going to supply a revision (or range of revisions) for a particular operation.
You can provide revision numbers, revision keywords or dates (in curly braces), as arguments to the
revision switch. If you wish to provide a range of revisions, you can provide two revisions separated
187
Subversion Complete Reference
by a colon. For example:
$
$
$
$
$
svn
svn
svn
svn
svn
log
log
log
log
log
-r
-r
-r
-r
-r
1729
1729:HEAD
1729:1744
{2001-12-04}:{2002-02-17}
1729:{2002-02-17}
See the section called “Revision Keywords” for more information.
--revprop
Operates on a revision property instead of a Subversion property specific to a file or directory. This
switch requires that you also pass a revision with the --revision (-r) switch. See the section
called “Unversioned Properties” for more details on unversioned properties.
--show-updates (-u)
Causes the client to display information about which files in your working copy are out-of-date.
This doesn't actually update any of your files—it just shows you which files will be updated if you
run svn update.
--stop-on-copy
Causes a Subversion subcommand which is traversing the history of a versioned resource to stop
harvesting that historical information when a copy—that is, a location in history where that resource
was copied from another location in the repository—is encountered.
--strict
Causes Subversion to use strict semantics, a notion which is rather vague unless talking about specific subcommands.
--targets FILENAME
Tells Subversion to get the list of files that you wish to operate on from the filename you provide instead of listing all the files on the command line.
--username NAME
Indicates that you are providing your username for authentication on the command line—otherwise,
if it is needed, Subversion will prompt you for it.
--verbose (-v)
Requests that the client print out as much information as it can while running any subcommand.
This may result in Subversion printing out additional fields, detailed information about every file, or
additional information regarding its actions.
--version
Prints the client version info. This information not only includes the version number of the client,
but also a listing of all repository access modules that the client can use to access a Subversion repository. With --quiet (-q) it prints only the version number in a compact form.
--xml
Prints output in XML format.
svn Subcommands
188
Subversion Complete Reference
Name
svn add — Add files, directories, or symbolic links.
Synopsis
svn add PATH...
Description
Add files, directories, or symbolic links to your working copy and schedule them for addition to the repository. They will be uploaded and added to the repository on your next commit. If you add something
and change your mind before committing, you can unschedule the addition using svn revert.
Alternate Names
None
Changes
Working Copy
Accesses Repository
No
Switches
--targets FILENAME
--non-recursive (-N)
--quiet (-q)
--config-dir DIR
--auto-props
--no-auto-props
--force
Examples
To add a file to your working copy:
$ svn add foo.c
A
foo.c
When adding a directory, the default behavior of svn add is to recurse:
$ svn add testdir
A
testdir
A
testdir/a
A
testdir/b
A
testdir/c
A
testdir/d
189
Subversion Complete Reference
You can add a directory without adding its contents:
$ svn add --non-recursive otherdir
A
otherdir
Normally, the command svn add * will skip over any directories that are already under version control.
Sometimes, however, you may want to add every unversioned object in your working copy, including
those hiding deeper down. Passing the --force option makes svn add recurse into versioned directories:
$ svn add * --force
A
foo.c
A
somedir/bar.c
A
otherdir/docs/baz.doc
…
190
Subversion Complete Reference
Name
svn blame — Show author and revision information in-line for the specified files or URLs.
Synopsis
svn blame TARGET[@REV]...
Description
Show author and revision information in-line for the specified files or URLs. Each line of text is annotated at the beginning with the author (username) and the revision number for the last change to that line.
Alternate Names
praise, annotate, ann
Changes
Nothing
Accesses Repository
Yes
Switches
--revision (-r) REV
--username USER
--password PASS
--no-auth-cache
--non-interactive
--config-dir DIR
--verbose
Examples
If you want to see blame annotated source for readme.txt in your test repository:
$ svn blame http://svn.red-bean.com/repos/test/readme.txt
3
sally This is a README file.
5
harry You should read this.
191
Subversion Complete Reference
Name
svn cat — Output the contents of the specified files or URLs.
Synopsis
svn cat TARGET[@REV]...
Description
Output the contents of the specified files or URLs. For listing the contents of directories, see svn list.
Alternate Names
None
Changes
Nothing
Accesses Repository
Yes
Switches
--revision (-r) REV
--username USER
--password PASS
--no-auth-cache
--non-interactive
--config-dir DIR
Examples
If you want to view readme.txt in your repository without checking it out:
$ svn cat http://svn.red-bean.com/repos/test/readme.txt
This is a README file.
You should read this.
Tip
If your working copy is out of date (or you have local modifications) and you want to see
the HEAD revision of a file in your working copy, svn cat will automatically fetch the
HEAD revision when you give it a path:
$ cat foo.c
This file is in my local working copy
and has changes that I've made.
$ svn cat foo.c
192
Subversion Complete Reference
Latest revision fresh from the repository!
193
Subversion Complete Reference
Name
svn checkout — Check out a working copy from a repository.
Synopsis
svn checkout URL[@REV]... [PATH]
Description
Check out a working copy from a repository. If PATH is omitted, the basename of the URL will be used
as the destination. If multiple URLs are given each will be checked out into a subdirectory of PATH,
with the name of the subdirectory being the basename of the URL.
Alternate Names
co
Changes
Creates a working copy.
Accesses Repository
Yes
Switches
--revision (-r) REV
--quiet (-q)
--non-recursive (-N)
--username USER
--password PASS
--no-auth-cache
--non-interactive
--ignore-externals
--config-dir DIR
Examples
Check out a working copy into a directory called mine:
$ svn checkout file:///tmp/repos/test mine
A mine/a
A mine/b
Checked out revision 2.
$ ls
mine
Check out 2 different directories into two separate working copies:
$ svn checkout file:///tmp/repos/test
A test/a
194
file:///tmp/repos/quiz
Subversion Complete Reference
A test/b
Checked out revision 2.
A quiz/l
A quiz/m
Checked out revision 2.
$ ls
quiz test
Check out 2 different directories into two separate working copies, but place both into a directory called
working-copies:
$ svn checkout file:///tmp/repos/test
A working-copies/test/a
A working-copies/test/b
Checked out revision 2.
A working-copies/quiz/l
A working-copies/quiz/m
Checked out revision 2.
$ ls
working-copies
file:///tmp/repos/quiz working-copies
If you interrupt a checkout (or something else interrupts your checkout like loss of connectivity, etc.),
you can restart it either by issuing the identical checkout command again, or by updating the incomplete
working copy:
$ svn checkout file:///tmp/repos/test test
A test/a
A test/b
^C
svn: The operation was interrupted
svn: caught SIGINT
$ svn checkout file:///tmp/repos/test test
A test/c
A test/d
^C
svn: The operation was interrupted
svn: caught SIGINT
$ cd test
$ svn update
A test/e
A test/f
Updated to revision 3.
195
Subversion Complete Reference
Name
svn cleanup — Recursively clean up the working copy.
Synopsis
svn cleanup [PATH...]
Description
Recursively clean up the working copy, removing working copy locks and resuming unfinished operations. If you ever get a “working copy locked” error, run this command to remove stale locks and get
your working copy into a usable state again.
If, for some reason, an svn update fails due to a problem running an external diff program (e.g. user input or network failure), pass the --diff3-cmd to allow cleanup to complete any merging with your
external diff program. You can also specify any configuration directory with the --config-dir
switch, but you should need these switches extremely infrequently.
Alternate Names
None
Changes
Working copy
Accesses Repository
No
Switches
--diff3-cmd CMD
--config-dir DIR
Examples
Well, there's not much to the examples here as svn cleanup generates no output. If you pass no PATH,
“.” is used.
$ svn cleanup
$ svn cleanup /path/to/working-copy
196
Subversion Complete Reference
Name
svn commit — Send changes from your working copy to the repository.
Synopsis
svn commit [PATH...]
Description
Send changes from your working copy to the repository. If you do not supply a log message with your
commit by using either the --file or --message switch, svn will launch your editor for you to compose a commit message. See the editor-cmd section in the section called “Config”.
svn commit will send found lock tokens and release locks on all PATHS committed (recursively) unless
--no-unlock is passed.
Tip
If you begin a commit and Subversion launches your editor to compose the commit message, you can still abort without committing your changes. If you want to cancel your commit, just quit your editor without saving your commit message and Subversion will prompt
you to either abort the commit, continue with no message, or edit the message again.
Alternate Names
ci (short for “check in”; not “co”, which is short for “checkout”)
Changes
Working copy, repository
Accesses Repository
Yes
Switches
--message (-m) TEXT
--file (-F) FILE
--quiet (-q)
--no-unlock
--non-recursive (-N)
--targets FILENAME
--force-log
--username USER
--password PASS
--no-auth-cache
--non-interactive
--encoding ENC
--config-dir DIR
Examples
197
Subversion Complete Reference
Commit a simple modification to a file with the commit message on the command line and an implicit
target of your current directory (“.”):
$ svn commit -m "added howto section."
Sending
a
Transmitting file data .
Committed revision 3.
Commit a modification to the file foo.c (explicitly specified on the command line) with the commit
message in a file named msg:
$ svn commit -F msg foo.c
Sending
foo.c
Transmitting file data .
Committed revision 5.
If you want to use a file that's under version control for your commit message with --file, you need
to pass the --force-log switch:
$ svn commit --file file_under_vc.txt foo.c
svn: The log message file is under version control
svn: Log message file is a versioned file; use '--force-log' to override
$ svn commit --force-log --file file_under_vc.txt foo.c
Sending
foo.c
Transmitting file data .
Committed revision 6.
To commit a file scheduled for deletion:
$ svn commit -m "removed file 'c'."
Deleting
c
Committed revision 7.
198
Subversion Complete Reference
Name
svn copy — Copy a file or directory in a working copy or in the repository.
Synopsis
svn copy SRC DST
Description
Copy a file in a working copy or in the repository. SRC and DST can each be either a working copy
(WC) path or URL:
WC -> WC
Copy and schedule an item for addition (with history).
WC -> URL
Immediately commit a copy of WC to URL.
URL -> WC
Check out URL into WC, and schedule it for addition.
URL -> URL
Complete server-side copy. This is usually used to branch and tag.
Note
You can only copy files within a single repository. Subversion does not support crossrepository copying.
Alternate Names
cp
Changes
Repository if destination is a URL.
Working copy if destination is a WC path.
Accesses Repository
If source or destination is in the repository, or if needed to look up the source revision number.
Switches
--message (-m) TEXT
--file (-F) FILE
--revision (-r) REV
--quiet (-q)
--username USER
--password PASS
--no-auth-cache
199
Subversion Complete Reference
--non-interactive
--force-log
--editor-cmd EDITOR
--encoding ENC
--config-dir DIR
Examples
Copy an item within your working copy (just schedules the copy—nothing goes into the repository until
you commit):
$ svn copy foo.txt bar.txt
A
bar.txt
$ svn status
A +
bar.txt
Copy an item in your working copy to a URL in the repository (an immediate commit, so you must supply a commit message):
$ svn copy near.txt file:///tmp/repos/test/far-away.txt -m "Remote copy."
Committed revision 8.
Copy an item from the repository to your working copy (just schedules the copy—nothing goes into the
repository until you commit):
Tip
This is the recommended way to resurrect a dead file in your repository!
$ svn copy file:///tmp/repos/test/far-away near-here
A
near-here
And finally, copying between two URLs:
$ svn copy file:///tmp/repos/test/far-away file:///tmp/repos/test/over-there -m "re
Committed revision 9.
Tip
This is the easiest way to “tag” a revision in your repository—just svn copy that revision
(usually HEAD) into your tags directory.
$ svn copy file:///tmp/repos/test/trunk file:///tmp/repos/test/tags/0.6.32-prerelea
Committed revision 12.
200
Subversion Complete Reference
And don't worry if you forgot to tag—you can always specify an older revision and tag anytime:
$ svn copy -r 11 file:///tmp/repos/test/trunk file:///tmp/repos/test/tags/0.6.32-pr
Committed revision 13.
201
Subversion Complete Reference
Name
svn delete — Delete an item from a working copy or the repository.
Synopsis
svn delete PATH...
svn delete URL...
Description
Items specified by PATH are scheduled for deletion upon the next commit. Files (and directories that
have not been committed) are immediately removed from the working copy. The command will not remove any unversioned or modified items; use the --force switch to override this behavior.
Items specified by URL are deleted from the repository via an immediate commit. Multiple URLs are
committed atomically.
Alternate Names
del, remove, rm
Changes
Working copy if operating on files, Repository if operating on URLs
Accesses Repository
Only if operating on URLs
Switches
--force
--force-log
--message (-m) TEXT
--file (-F) FILE
--quiet (-q)
--targets FILENAME
--username USER
--password PASS
--no-auth-cache
--non-interactive
--editor-cmd EDITOR
--encoding ENC
--config-dir DIR
Examples
Using svn to delete a file from your working copy merely schedules it to be deleted. When you commit,
the file is deleted in the repository.
$ svn delete myfile
D
myfile
202
Subversion Complete Reference
$ svn commit -m "Deleted file 'myfile'."
Deleting
myfile
Transmitting file data .
Committed revision 14.
Deleting a URL, however, is immediate, so you have to supply a log message:
$ svn delete -m "Deleting file 'yourfile'" file:///tmp/repos/test/yourfile
Committed revision 15.
Here's an example of how to force deletion of a file that has local mods:
$ svn delete over-there
svn: Attempting restricted operation for modified resource
svn: Use --force to override this restriction
svn: 'over-there' has local modifications
$ svn delete --force over-there
D
over-there
203
Subversion Complete Reference
Name
svn diff — Display the differences between two paths.
Synopsis
diff [-r N[:M]] [TARGET[@REV]...]
diff [-r N[:M]] --old OLD-TGT[@OLDREV] [--new NEW-TGT[@NEWREV]] [PATH...]
diff OLD-URL[@OLDREV] NEW-URL[@NEWREV]
Description
Display the differences between two paths. The three different ways you can use svn diff are:
svn diff [-r N[:M]] [--old OLD-TGT] [--new NEW-TGT] [PATH...] displays the differences between
OLD-TGT and NEW-TGT. If PATHs are given, they are treated as relative to OLD-TGT and NEW-TGT
and the output is restricted to differences in only those paths. OLD-TGT and NEW-TGT may be working
copy paths or URL[@REV]. OLD-TGT defaults to the current working directory and NEW-TGT defaults
to OLD-TGT. N defaults to BASE or, if OLD-TGT is a URL, to HEAD. M defaults to the current working
version or, if NEW-TGT is a URL, to HEAD. svn diff -r N sets the revision of OLD-TGT to N, svn diff -r
N:M also sets the revision of NEW-TGT to M.
svn diff -r N:M URL is shorthand for svn diff -r N:M --old=URL --new=URL.
svn diff [-r N[:M]] URL1[@N] URL2[@M] is shorthand for svn diff [-r N[:M]] --old=URL1 -new=URL2.
If TARGET is a URL, then revs N and M can be given either via the --revision or by using “@”
notation as described earlier.
If TARGET is a working copy path, then the --revision switch means:
--revision N:M
The server compares TARGET@N and TARGET@M.
--revision N
The client compares TARGET@N against working copy.
(no --revision)
The client compares base and working copies of TARGET.
If the alternate syntax is used, the server compares URL1 and URL2 at revisions N and M respectively. If
either N or M are omitted, a value of HEAD is assumed.
By default, svn diff ignores the ancestry of files and merely compares the contents of the two files being
compared. If you use --notice-ancestry, the ancestry of the paths in question will be taken into
consideration when comparing revisions (that is, if you run svn diff on two files with identical contents
but different ancestry you will see the entire contents of the file as having been removed and added
again).
Alternate Names
204
Subversion Complete Reference
di
Changes
Nothing
Accesses Repository
For obtaining differences against anything but BASE revision in your working copy
Switches
--revision (-r) REV
--old OLD-TARGET
--new NEW-TARGET
--extensions (-x) "ARGS"
--non-recursive (-N)
--diff-cmd CMD
--notice-ancestry
--username USER
--password PASS
--no-auth-cache
--non-interactive
--no-diff-deleted
--config-dir DIR
Examples
Compare BASE and your working copy (one of the most popular uses of svn diff):
$ svn diff COMMITTERS
Index: COMMITTERS
===================================================================
--- COMMITTERS (revision 4404)
+++ COMMITTERS (working copy)
See how your working copy's modifications compare against an older revision:
$ svn diff -r 3900 COMMITTERS
Index: COMMITTERS
===================================================================
--- COMMITTERS (revision 3900)
+++ COMMITTERS (working copy)
Compare revision 3000 to revision 3500 using “@” syntax:
$ svn diff http://svn.collab.net/repos/svn/trunk/COMMITTERS@3000 http://svn.collab.
Index: COMMITTERS
===================================================================
--- COMMITTERS (revision 3000)
+++ COMMITTERS (revision 3500)
…
Compare revision 3000 to revision 3500 using range notation (you only pass the one URL in this case):
205
Subversion Complete Reference
$ svn diff -r 3000:3500 http://svn.collab.net/repos/svn/trunk/COMMITTERS
Index: COMMITTERS
===================================================================
--- COMMITTERS (revision 3000)
+++ COMMITTERS (revision 3500)
Compare revision 3000 to revision 3500 of all files in trunk using range notation:
$ svn diff -r 3000:3500 http://svn.collab.net/repos/svn/trunk
Compare revision 3000 to revision 3500 of only three files in trunk using range notation:
$ svn diff -r 3000:3500 --old http://svn.collab.net/repos/svn/trunk COMMITTERS READ
If you have a working copy, you can obtain the differences without typing in the long URLs:
$ svn diff -r 3000:3500 COMMITTERS
Index: COMMITTERS
===================================================================
--- COMMITTERS (revision 3000)
+++ COMMITTERS (revision 3500)
Use --diff-cmd CMD -x to pass arguments directly to the external diff program
$ svn diff --diff-cmd /usr/bin/diff -x "-i -b" COMMITTERS
Index: COMMITTERS
===================================================================
0a1,2
> This is a test
>
206
Subversion Complete Reference
Name
svn export — Export a clean directory tree.
Synopsis
svn export [-r REV] URL[@PEGREV] [PATH]
svn export [-r REV] PATH1[@PEGREV] [PATH2]
Description
The first form exports a clean directory tree from the repository specified by URL, at revision REV if it
is given, otherwise at HEAD, into PATH. If PATH is omitted, the last component of the URL is used for
the local directory name.
The second form exports a clean directory tree from the working copy specified by PATH1 into PATH2.
All local changes will be preserved, but files not under version control will not be copied.
Alternate Names
None
Changes
Local disk
Accesses Repository
Only if exporting from a URL
Switches
--revision (-r) REV
--quiet (-q)
--force
--username USER
--password PASS
--no-auth-cache
--non-interactive
--non-recursive
--config-dir DIR
--native-eol EOL
--ignore-externals
Examples
Export from your working copy (doesn't print every file and directory):
$ svn export a-wc my-export
Export complete.
Export directly from the repository (prints every file and directory):
207
Subversion Complete Reference
$ svn export file:///tmp/repos my-export
A my-export/test
A my-export/quiz
…
Exported revision 15.
When rolling operating-system-specific release packages, it can be useful to export a tree which uses a
specific EOL character for line endings. The --native-eol option will do this, but it only affects
files that have svn:eol-style = native properties attached to them. For example, to export a
tree with all CRLF line endings (possibly for a Windows .zip file distribution):
$ svn export file://tmp/repos my-export --native-eol CRLF
A my-export/test
A my-export/quiz
…
Exported revision 15.
208
Subversion Complete Reference
Name
svn help — Help!
Synopsis
svn help [SUBCOMMAND...]
Description
This is your best friend when you're using Subversion and this book isn't within reach!
Alternate Names
?, h
The options -?, -h and --help have the same effect as using the help subcommand.
Changes
Nothing
Accesses Repository
No
Switches
--version
--quiet (-q)
--config-dir DIR
209
Subversion Complete Reference
Name
svn import — Commit an unversioned file or tree into the repository.
Synopsis
svn import [PATH] URL
Description
Recursively commit a copy of PATH to URL. If PATH is omitted “.” is assumed. Parent directories are
created in the repository as necessary.
Alternate Names
None
Changes
Repository
Accesses Repository
Yes
Switches
--message (-m) TEXT
--file (-F) FILE
--quiet (-q)
--non-recursive (-N)
--username USER
--password PASS
--no-auth-cache
--non-interactive
--force-log
--editor-cmd EDITOR
--encoding ENC
--config-dir DIR
--auto-props
--no-auto-props
--ignore-externals
Examples
This imports the local directory myproj into the root of your repository:
$ svn import -m "New import" myproj http://svn.red-bean.com/repos/test
Adding
myproj/sample.txt
…
Transmitting file data .........
Committed revision 16.
This imports the local directory myproj into trunk/misc in your repository. The directory trunk/
210
Subversion Complete Reference
misc need not exist before you import into it—svn import will recursively create directories for you:
$ svn import -m "New import" myproj \
http://svn.red-bean.com/repos/test/trunk/misc/myproj
Adding
myproj/sample.txt
…
Transmitting file data .........
Committed revision 19.
After importing data, note that the original tree is not under version control. To start working, you still
need to svn checkout a fresh working copy of the tree.
211
Subversion Complete Reference
Name
svn info — Display information about a local or remote item.
Synopsis
svn info [TARGET...]
Description
Print information about the working copy paths or URLs specified. The information shown for both may
include:
• Path
• Name
• URL
• Repository Root
• Repository UUID
• Revision
• Node Kind
• Last Changed Author
• Last Changed Revision
• Last Changed Date
• Lock Token
• Lock Owner
• Lock Created (date)
• Lock Expires (date)
Additional kinds of information available only for working copy paths are:
• Schedule
• Copied From URL
• Copied From Rev
• Text Last Updated
• Properties Last Updated
• Checksum
212
Subversion Complete Reference
• Conflict Previous Base File
• Conflict Previous Working File
• Conflict Current Base File
• Conflict Properties File
Alternate Names
None
Changes
Nothing
Accesses Repository
Only if operating on URLs
Switches
--revision (-r)
--recursive (-R)
--targets FILENAME
--incremental
--xml
--username ARG
--password ARG
--no-auth-cache
--non-interactive
--config-dir DIR
Examples
svn info will show you all the useful information that it has for items in your working copy. It will show
information for files:
$ svn info foo.c
Path: foo.c
Name: foo.c
URL: http://svn.red-bean.com/repos/test/foo.c
Repository Root: http://svn.red-bean.com/repos/test
Repository UUID: 5e7d134a-54fb-0310-bd04-b611643e5c25
Revision: 4417
Node Kind: file
Schedule: normal
Last Changed Author: sally
Last Changed Rev: 20
Last Changed Date: 2003-01-13 16:43:13 -0600 (Mon, 13 Jan 2003)
Text Last Updated: 2003-01-16 21:18:16 -0600 (Thu, 16 Jan 2003)
Properties Last Updated: 2003-01-13 21:50:19 -0600 (Mon, 13 Jan 2003)
Checksum: d6aeb60b0662ccceb6bce4bac344cb66
It will also show information for directories:
213
Subversion Complete Reference
$ svn info vendors
Path: vendors
URL: http://svn.red-bean.com/repos/test/vendors
Repository Root: http://svn.red-bean.com/repos/test
Repository UUID: 5e7d134a-54fb-0310-bd04-b611643e5c25
Revision: 19
Node Kind: directory
Schedule: normal
Last Changed Author: harry
Last Changed Rev: 19
Last Changed Date: 2003-01-16 23:21:19 -0600 (Thu, 16 Jan 2003)
Properties Last Updated: 2003-01-16 23:39:02 -0600 (Thu, 16 Jan 2003)
svn info also acts on URLs (also note that the file readme.doc in this example is locked, so lock information is also provided):
$ svn info http://svn.red-bean.com/repos/test/readme.doc
Path: readme.doc
Name: readme.doc
URL: http://svn.red-bean.com/repos/test/readme.doc
Repository Root: http://svn.red-bean.com/repos/test
Repository UUID: 5e7d134a-54fb-0310-bd04-b611643e5c25
Revision: 1
Node Kind: file
Schedule: normal
Last Changed Author: sally
Last Changed Rev: 42
Last Changed Date: 2003-01-14 23:21:19 -0600 (Tue, 14 Jan 2003)
Lock Token: opaquelocktoken:14011d4b-54fb-0310-8541-dbd16bd471b2
Lock Owner: harry
Lock Created: 2003-01-15 17:35:12 -0600 (Wed, 15 Jan 2003)
Lock Comment (1 line):
My test lock comment
214
Subversion Complete Reference
Name
svn list — List directory entries in the repository.
Synopsis
svn list [TARGET[@REV]...]
Description
List each TARGET file and the contents of each TARGET directory as they exist in the repository. If
TARGET is a working copy path, the corresponding repository URL will be used.
The default TARGET is “.”, meaning the repository URL of the current working copy directory.
With --verbose, the following fields show the status of the item:
• Revision number of the last commit
• Author of the last commit
• Size (in bytes)
• Date and time of the last commit
With --xml, output is in XML format (with a header and an enclosing document element unless -incremental is also specified). All of the information is present; the --verbose option is not accepted.
Alternate Names
ls
Changes
Nothing
Accesses Repository
Yes
Switches
--revision (-r) REV
--verbose (-v)
--recursive (-R)
--incremental
--xml
--username USER
--password PASS
--no-auth-cache
--non-interactive
--config-dir DIR
215
Subversion Complete Reference
Examples
svn list is most useful if you want to see what files a repository has without downloading a working
copy:
$ svn list http://svn.red-bean.com/repos/test/support
README.txt
INSTALL
examples/
…
You can pass the --verbose switch for additional information, rather like the UNIX command ls -l:
$ svn list --verbose file:///tmp/repos
16 sally
28361 Jan 16 23:18 README.txt
27 sally
0 Jan 18 15:27 INSTALL
24 harry
Jan 18 11:27 examples/
For further details, see the section called “svn list”.
216
Subversion Complete Reference
Name
svn lock — Lock working copy paths or URLs in the repository, so that no other user can commit
changes to them.
Synopsis
svn lock TARGET...
Description
Lock each TARGET. If any TARGET is already locked by another user, print a warning and continue
locking the rest of the TARGETs. Use --force to steal a lock from another user or working copy.
Alternate Names
None
Changes
Working Copy, Repository
Accesses Repository
Yes
Switches
--targets ARG
--message (-m) ARG
--file (-F) ARG
--force-log
--encoding ARG
--username ARG
--password ARG
--no-auth-cache
--non-interactive
--config-dir ARG
--force
Examples
Lock two files in your working copy:
$ svn lock tree.jpg house.jpg
'tree.jpg' locked by user 'harry'.
'house.jpg' locked by user 'harry'.
Lock a file in your working copy that is currently locked by another user:
$ svn lock tree.jpg
svn: warning: Path '/tree.jpg is already locked by user 'harry in \
217
Subversion Complete Reference
filesystem '/svn/repos/db'
$ svn lock --force foo
'tree.jpg' locked by user 'sally'.
Lock a file without a working copy:
$ svn lock http://svn.red-bean.com/repos/test/tree.jpg
'tree.jpg' locked by user 'sally'.
For further details, see the section called “Locking”.
218
Subversion Complete Reference
Name
svn log — Display commit log messages.
Synopsis
svn log [PATH]
svn log URL [PATH...]
Description
The default target is the path of your current directory. If no arguments are supplied, svn log shows the
log messages for all files and directories inside of (and including) the current working directory of your
working copy. You can refine the results by specifying a path, one or more revisions, or any combination of the two. The default revision range for a local path is BASE:1.
If you specify a URL alone, then it prints log messages for everything that the URL contains. If you add
paths past the URL, only messages for those paths under that URL will be printed. The default revision
range for a URL is HEAD:1.
With --verbose, svn log will also print all affected paths with each log message. With --quiet,
svn log will not print the log message body itself (this is compatible with --verbose).
Each log message is printed just once, even if more than one of the affected paths for that revision were
explicitly requested. Logs follow copy history by default. Use --stop-on-copy to disable this behavior, which can be useful for determining branch points.
Alternate Names
None
Changes
Nothing
Accesses Repository
Yes
Switches
--revision (-r) REV
--quiet (-q)
--verbose (-v)
--targets FILENAME
--stop-on-copy
--incremental
--limit NUM
--xml
--username USER
--password PASS
--no-auth-cache
--non-interactive
--config-dir DIR
219
Subversion Complete Reference
Examples
You can see the log messages for all the paths that changed in your working copy by running svn log
from the top:
$ svn log
-----------------------------------------------------------------------r20 | harry | 2003-01-17 22:56:19 -0600 (Fri, 17 Jan 2003) | 1 line
Tweak.
-----------------------------------------------------------------------r17 | sally | 2003-01-16 23:21:19 -0600 (Thu, 16 Jan 2003) | 2 lines
…
Examine all log messages for a particular file in your working copy:
$ svn log foo.c
-----------------------------------------------------------------------r32 | sally | 2003-01-13 00:43:13 -0600 (Mon, 13 Jan 2003) | 1 line
Added defines.
-----------------------------------------------------------------------r28 | sally | 2003-01-07 21:48:33 -0600 (Tue, 07 Jan 2003) | 3 lines
…
If you don't have a working copy handy, you can log a URL:
$ svn log http://svn.red-bean.com/repos/test/foo.c
-----------------------------------------------------------------------r32 | sally | 2003-01-13 00:43:13 -0600 (Mon, 13 Jan 2003) | 1 line
Added defines.
-----------------------------------------------------------------------r28 | sally | 2003-01-07 21:48:33 -0600 (Tue, 07 Jan 2003) | 3 lines
…
If you want several distinct paths underneath the same URL, you can use the URL [PATH...] syntax.
$ svn log http://svn.red-bean.com/repos/test/ foo.c bar.c
-----------------------------------------------------------------------r32 | sally | 2003-01-13 00:43:13 -0600 (Mon, 13 Jan 2003) | 1 line
Added defines.
-----------------------------------------------------------------------r31 | harry | 2003-01-10 12:25:08 -0600 (Fri, 10 Jan 2003) | 1 line
Added new file bar.c
-----------------------------------------------------------------------r28 | sally | 2003-01-07 21:48:33 -0600 (Tue, 07 Jan 2003) | 3 lines
…
When you're concatenating the results of multiple calls to the log command, you may want to use the -incremental switch. svn log normally prints out a dashed line at the beginning of a log message,
after each subsequent log message, and following the final log message. If you ran svn log on a range of
two revisions, you would get this:
220
Subversion Complete Reference
$ svn log -r 14:15
-----------------------------------------------------------------------r14 | …
-----------------------------------------------------------------------r15 | …
-----------------------------------------------------------------------However, if you wanted to gather 2 non-sequential log messages into a file, you might do something like
this:
$ svn log -r 14 > mylog
$ svn log -r 19 >> mylog
$ svn log -r 27 >> mylog
$ cat mylog
-----------------------------------------------------------------------r14 | …
----------------------------------------------------------------------------------------------------------------------------------------------r19 | …
----------------------------------------------------------------------------------------------------------------------------------------------r27 | …
-----------------------------------------------------------------------You can avoid the clutter of the double dashed lines in your output by using the incremental switch:
$ svn log --incremental -r 14 > mylog
$ svn log --incremental -r 19 >> mylog
$ svn log --incremental -r 27 >> mylog
$ cat mylog
-----------------------------------------------------------------------r14 | …
-----------------------------------------------------------------------r19 | …
-----------------------------------------------------------------------r27 | …
The --incremental switch provides similar output control when using the --xml switch.
Tip
If you run svn log on a specific path and provide a specific revision and get no output at all
$ svn log -r 20 http://svn.red-bean.com/untouched.txt
-----------------------------------------------------------------------That just means that the path was not modified in that revision. If you log from the top of
the repository, or know the file that changed in that revision, you can specify it explicitly:
221
Subversion Complete Reference
$ svn log -r 20 touched.txt
-----------------------------------------------------------------------r20 | sally | 2003-01-17 22:56:19 -0600 (Fri, 17 Jan 2003) | 1 line
Made a change.
------------------------------------------------------------------------
222
Subversion Complete Reference
Name
svn merge — Apply the differences between two sources to a working copy path.
Synopsis
svn merge sourceURL1[@N] sourceURL2[@M] [WCPATH]
svn merge sourceWCPATH1@N sourceWCPATH2@M [WCPATH]
svn merge -r N:M SOURCE[@REV] [WCPATH]
Description
In the first and second forms, the source paths (URLs in the first form, working copy paths in the
second) are specified at revisions N and M. These are the two sources to be compared. The revisions default to HEAD if omitted.
In the third form, SOURCE can be a URL or working copy item, in which case the corresponding URL is
used. This URL, at revisions N and M, defines the two sources to be compared.
WCPATH is the working copy path that will receive the changes. If WCPATH is omitted, a default value
of “.” is assumed, unless the sources have identical basenames that match a file within “.”: in which
case, the differences will be applied to that file.
Unlike svn diff, the merge command takes the ancestry of a file into consideration when performing a
merge operation. This is very important when you're merging changes from one branch into another and
you've renamed a file on one branch but not the other.
Alternate Names
None
Changes
Working copy
Accesses Repository
Only if working with URLs
Switches
--revision (-r) REV
--non-recursive (-N)
--quiet (-q)
--force
--dry-run
--diff3-cmd CMD
--ignore-ancestry
--username USER
--password PASS
--no-auth-cache
--non-interactive
--config-dir DIR
223
Subversion Complete Reference
Examples
Merge a branch back into the trunk (assuming that you have a working copy of the trunk, and that the
branch was created in revision 250):
$ svn merge -r 250:HEAD http://svn.red-bean.com/repos/branches/my-branch
U myproj/tiny.txt
U myproj/thhgttg.txt
U myproj/win.txt
U myproj/flo.txt
If you branched at revision 23, and you want to merge changes on trunk into your branch, you could do
this from inside the working copy of your branch:
$ svn merge -r 23:30 file:///tmp/repos/trunk/vendors
U myproj/thhgttg.txt
…
To merge changes to a single file:
$ cd myproj
$ svn merge -r 30:31 thhgttg.txt
U thhgttg.txt
224
Subversion Complete Reference
Name
svn mkdir — Create a new directory under version control.
Synopsis
svn mkdir PATH...
svn mkdir URL...
Description
Create a directory with a name given by the final component of the PATH or URL. A directory specified
by a working copy PATH is scheduled for addition in the working copy. A directory specified by a URL
is created in the repository via an immediate commit. Multiple directory URLs are committed atomically. In both cases all the intermediate directories must already exist.
Alternate Names
None
Changes
Working copy, repository if operating on a URL
Accesses Repository
Only if operating on a URL
Switches
--message (-m) TEXT
--file (-F) FILE
--quiet (-q)
--username USER
--password PASS
--no-auth-cache
--non-interactive
--editor-cmd EDITOR
--encoding ENC
--force-log
--config-dir DIR
Examples
Create a directory in your working copy:
$ svn mkdir newdir
A
newdir
Create one in the repository (instant commit, so a log message is required):
225
Subversion Complete Reference
$ svn mkdir -m "Making a new dir." http://svn.red-bean.com/repos/newdir
Committed revision 26.
226
Subversion Complete Reference
Name
svn move — Move a file or directory.
Synopsis
svn move SRC DST
Description
This command moves a file or directory in your working copy or in the repository.
Tip
This command is equivalent to an svn copy followed by svn delete.
Note
Subversion does not support moving between working copies and URLs. In addition, you
can only move files within a single repository—Subversion does not support cross-repository moving.
WC -> WC
Move and schedule a file or directory for addition (with history).
URL -> URL
Complete server-side rename.
Alternate Names
mv, rename, ren
Changes
Working copy, repository if operating on a URL
Accesses Repository
Only if operating on a URL
Switches
--message (-m) TEXT
--file (-F) FILE
--revision (-r) REV
--quiet (-q)
--force
--username USER
--password PASS
--no-auth-cache
--non-interactive
--editor-cmd EDITOR
227
Subversion Complete Reference
--encoding ENC
--force-log
--config-dir DIR
Examples
Move a file in your working copy:
$ svn move foo.c bar.c
A
bar.c
D
foo.c
Move a file in the repository (an immediate commit, so it requires a commit message):
$ svn move -m "Move a file" http://svn.red-bean.com/repos/foo.c \
http://svn.red-bean.com/repos/bar.c
Committed revision 27.
228
Subversion Complete Reference
Name
svn propdel — Remove a property from an item.
Synopsis
svn propdel PROPNAME [PATH...]
svn propdel PROPNAME --revprop -r REV [URL]
Description
This removes properties from files, directories, or revisions. The first form removes versioned properties
in your working copy, while the second removes unversioned remote properties on a repository revision.
Alternate Names
pdel, pd
Changes
Working copy, repository only if operating on a URL
Accesses Repository
Only if operating on a URL
Switches
--quiet (-q)
--recursive (-R)
--revision (-r) REV
--revprop
--username USER
--password PASS
--no-auth-cache
--non-interactive
--config-dir DIR
Examples
Delete a property from a file in your working copy
$ svn propdel svn:mime-type some-script
property 'svn:mime-type' deleted from 'some-script'.
Delete a revision property:
$ svn propdel --revprop -r 26 release-date
property 'release-date' deleted from repository revision '26'
229
Subversion Complete Reference
Name
svn propedit — Edit the property of one or more items under version control.
Synopsis
svn propedit PROPNAME PATH...
svn propedit PROPNAME --revprop -r REV [URL]
Description
Edit one or more properties using your favorite editor. The first form edits versioned properties in your
working copy, while the second edits unversioned remote properties on a repository revision.
Alternate Names
pedit, pe
Changes
Working copy, repository only if operating on a URL
Accesses Repository
Only if operating on a URL
Switches
--revision (-r) REV
--revprop
--username USER
--password PASS
--no-auth-cache
--non-interactive
--encoding ENC
--editor-cmd EDITOR
--config-dir DIR
Examples
svn propedit makes it easy to modify properties that have multiple values:
$ svn propedit svn:keywords foo.c
<svn will launch your favorite editor here, with a buffer open
containing the current contents of the svn:keywords property. You
can add multiple values to a property easily here by entering one
value per line.>
Set new value for property 'svn:keywords' on 'foo.c'
230
Subversion Complete Reference
Name
svn propget — Print the value of a property.
Synopsis
svn propget PROPNAME [TARGET[@REV]...]
svn propget PROPNAME --revprop -r REV [URL]
Description
Print the value of a property on files, directories, or revisions. The first form prints the versioned property of an item or items in your working copy, while the second prints unversioned remote property on a
repository revision. See the section called “Properties” for more information on properties.
Alternate Names
pget, pg
Changes
Working copy, repository only if operating on a URL
Accesses Repository
Only if operating on a URL
Switches
--recursive (-R)
--revision (-r) REV
--revprop
--strict
--username USER
--password PASS
--no-auth-cache
--non-interactive
--config-dir DIR
Examples
Examine a property of a file in your working copy:
$ svn propget svn:keywords foo.c
Author
Date
Rev
The same goes for a revision property:
$ svn propget svn:log --revprop -r 20
231
Subversion Complete Reference
Began journal.
232
Subversion Complete Reference
Name
svn proplist — List all properties.
Synopsis
svn proplist [TARGET[@REV]...]
svn proplist --revprop -r REV [URL]
Description
List all properties on files, directories, or revisions. The first form lists versioned properties in your
working copy, while the second lists unversioned remote properties on a repository revision.
Alternate Names
plist, pl
Changes
Working copy, repository only if operating on a URL
Accesses Repository
Only if operating on a URL
Switches
--verbose (-v)
--recursive (-R)
--revision (-r) REV
--quiet (-q)
--revprop
--username USER
--password PASS
--no-auth-cache
--non-interactive
--config-dir DIR
Examples
You can use proplist to see the properties on an item in your working copy:
$ svn proplist foo.c
Properties on 'foo.c':
svn:mime-type
svn:keywords
owner
But with the --verbose flag, svn proplist is extremely handy as it also shows you the values for the
properties:
233
Subversion Complete Reference
$ svn proplist --verbose foo.c
Properties on 'foo.c':
svn:mime-type : text/plain
svn:keywords : Author Date Rev
owner : sally
234
Subversion Complete Reference
Name
svn propset — Set PROPNAME to PROPVAL on files, directories, or revisions.
Synopsis
svn propset PROPNAME [PROPVAL | -F VALFILE] PATH...
svn propset PROPNAME --revprop -r REV [PROPVAL | -F VALFILE] [URL]
Description
Set PROPNAME to PROPVAL on files, directories, or revisions. The first example creates a versioned,
local property change in the working copy, and the second creates an unversioned, remote property
change on a repository revision.
Tip
Subversion has a number of “special” properties that affect its behavior. See the section
called “Special Properties” for more on these properties.
Alternate Names
pset, ps
Changes
Working copy, repository only if operating on a URL
Accesses Repository
Only if operating on a URL
Switches
--file (-F) FILE
--quiet (-q)
--revision (-r) REV
--targets FILENAME
--recursive (-R)
--revprop
--username USER
--password PASS
--no-auth-cache
--non-interactive
--encoding ENC
--force
--config-dir DIR
Examples
Set the mimetype on a file:
235
Subversion Complete Reference
$ svn propset svn:mime-type image/jpeg foo.jpg
property 'svn:mime-type' set on 'foo.jpg'
On a UNIX system, if you want a file to have the executable permission set:
$ svn propset svn:executable ON somescript
property 'svn:executable' set on 'somescript'
Perhaps you have an internal policy to set certain properties for the benefit of your coworkers:
$ svn propset owner sally foo.c
property 'owner' set on 'foo.c'
If you made a mistake in a log message for a particular revision and want to change it, use --revprop
and set svn:log to the new log message:
$ svn propset --revprop -r 25 svn:log "Journaled about trip to New York."
property 'svn:log' set on repository revision '25'
Or, if you don't have a working copy, you can provide a URL.
$ svn propset --revprop -r 26 svn:log "Document nap." http://svn.red-bean.com/repos
property 'svn:log' set on repository revision '25'
Lastly, you can tell propset to take its input from a file. You could even use this to set the contents of a
property to something binary:
$ svn propset owner-pic -F sally.jpg moo.c
property 'owner-pic' set on 'moo.c'
Note
By default, you cannot modify revision properties in a Subversion repository. Your repository administrator must explicitly enable revision property modifications by creating a
hook named pre-revprop-change. See the section called “Hook Scripts” for more information on hook scripts.
236
Subversion Complete Reference
Name
svn resolved — Remove “conflicted” state on working copy files or directories.
Synopsis
svn resolved PATH...
Description
Remove “conflicted” state on working copy files or directories. This routine does not semantically resolve conflict markers; it merely removes conflict-related artifact files and allows PATH to be committed again; that is, it tells Subversion that the conflicts have been “resolved”. See the section called
“Resolve Conflicts (Merging Others' Changes)” for an in-depth look at resolving conflicts.
Alternate Names
None
Changes
Working copy
Accesses Repository
No
Switches
--targets FILENAME
--recursive (-R)
--quiet (-q)
--config-dir DIR
Examples
If you get a conflict on an update, your working copy will sprout three new files:
$ svn update
C foo.c
Updated to revision 31.
$ ls
foo.c
foo.c.mine
foo.c.r30
foo.c.r31
Once you've resolved the conflict and foo.c is ready to be committed, run svn resolved to let your
working copy know you've taken care of everything.
Warning
You can just remove the conflict files and commit, but svn resolved fixes up some book237
Subversion Complete Reference
keeping data in the working copy administrative area in addition to removing the conflict
files, so we recommend that you use this command.
238
Subversion Complete Reference
Name
svn revert — Undo all local edits.
Synopsis
svn revert PATH...
Description
Reverts any local changes to a file or directory and resolves any conflicted states. svn revert will not
only revert the contents of an item in your working copy, but also any property changes. Finally, you
can use it to undo any scheduling operations that you may have done (e.g. files scheduled for addition or
deletion can be “unscheduled”).
Alternate Names
None
Changes
Working copy
Accesses Repository
No
Switches
--targets FILENAME
--recursive (-R)
--quiet (-q)
--config-dir DIR
Examples
Discard changes to a file:
$ svn revert foo.c
Reverted foo.c
If you want to revert a whole directory of files, use the --recursive flag:
$ svn revert --recursive .
Reverted newdir/afile
Reverted foo.c
Reverted bar.txt
Lastly, you can undo any scheduling operations:
$ svn add mistake.txt whoops
239
Subversion Complete Reference
A
A
A
mistake.txt
whoops
whoops/oopsie.c
$ svn revert mistake.txt whoops
Reverted mistake.txt
Reverted whoops
$ svn status
?
mistake.txt
?
whoops
Note
If you provide no targets to svn revert, it will do nothing—to protect you from accidentally losing changes in your working copy, svn revert requires you to provide at least one
target.
240
Subversion Complete Reference
Name
svn status — Print the status of working copy files and directories.
Synopsis
svn status [PATH...]
Description
Print the status of working copy files and directories. With no arguments, it prints only locally modified
items (no repository access). With --show-updates, add working revision and server out-of-date information. With --verbose, print full revision information on every item.
The first six columns in the output are each one character wide, and each column gives you information
about different aspects of each working copy item.
The first column indicates that an item was added, deleted, or otherwise changed.
''
No modifications.
'A'
Item is scheduled for Addition.
'D'
Item is scheduled for Deletion.
'M'
Item has been modified.
'R'
Item has been replaced in your working copy. This means the file was scheduled for deletion, and
then a new file with the same name was scheduled for addition in its place.
'C'
The contents (as opposed to the properties) of the item conflict with updates received from the repository.
'X'
Item is related to an externals definition.
'I'
Item is being ignored (e.g. with the svn:ignore property).
'?'
Item is not under version control.
'!'
Item is missing (e.g. you moved or deleted it without using svn). This also indicates that a directory
is incomplete (a checkout or update was interrupted).
'~'
Item is versioned as one kind of object (file, directory, link), but has been replaced by different kind
of object.
241
Subversion Complete Reference
The second column tells the status of a file's or directory's properties.
''
No modifications.
'M'
Properties for this item have been modified.
'C'
Properties for this item are in conflict with property updates received from the repository.
The third column is populated only if the working copy directory is locked. (See the section called “svn
cleanup”.)
''
Item is not locked.
'L'
Item is locked.
The fourth column is populated only if the item is scheduled for addition-with-history.
''
No history scheduled with commit.
'+'
History scheduled with commit.
The fifth column is populated only if the item is switched relative to its parent (see the section called
“Switching a Working Copy”).
''
Item is a child of its parent directory.
'S'
Item is switched.
The sixth column is populated with lock information.
''
When --show-updates is used, the file is not locked. If --show-updates is not used, this
merely means that the file is not locked in this working copy.
K
File is locked in this working copy.
O
File is locked either by another user or in another working copy. This only appears when -show-updates is used.
T
242
Subversion Complete Reference
File was locked in this working copy, but the lock has been “stolen”and is invalid. The file is currently locked in the repository. This only appears when --show-updates is used.
B
File was locked in this working copy, but the lock has been “broken”and is invalid. The file is no
longer locked This only appears when --show-updates is used.
The out-of-date information appears in the seventh column (only if you pass the --show-updates
switch).
''
The item in your working copy is up-to-date.
'*'
A newer revision of the item exists on the server.
The remaining fields are variable width and delimited by spaces. The working revision is the next field
if the --show-updates or --verbose switches are passed.
If the --verbose switch is passed, the last committed revision and last committed author are displayed next.
The working copy path is always the final field, so it can include spaces.
Alternate Names
stat, st
Changes
Nothing
Accesses Repository
Only if using --show-updates
Switches
--show-updates (-u)
--verbose (-v)
--non-recursive (-N)
--quiet (-q)
--no-ignore
--username USER
--password PASS
--no-auth-cache
--non-interactive
--config-dir
--ignore-externals
Examples
This is the easiest way to find out what changes you have made to your working copy:
$ svn status wc
243
Subversion Complete Reference
M
A
+
wc/bar.c
wc/qax.c
If you want to find out what files in your working copy are out-of-date, pass the --show-updates
switch (this will not make any changes to your working copy). Here you can see that wc/foo.c has
changed in the repository since we last updated our working copy:
$ svn status --show-updates wc
M
965
wc/bar.c
*
965
wc/foo.c
A +
965
wc/qax.c
Status against revision:
981
Note
--show-updates only places an asterisk next to items that are out of date (that is, items
that will be updated from the repository if you run svn update). --show-updates does
not cause the status listing to reflect the repository's version of the item.
And finally, the most information you can get out of the status subcommand:
$ svn status --show-updates --verbose wc
M
965
938 sally
wc/bar.c
*
965
922 harry
wc/foo.c
A +
965
687 harry
wc/qax.c
965
687 harry
wc/zig.c
Head revision:
981
For many more examples of svn status, see the section called “svn status”.
244
Subversion Complete Reference
Name
svn switch — Update working copy to a different URL.
Synopsis
svn switch URL [PATH]
switch --relocate FROM TO [PATH...]
Description
This subcommand updates your working copy to mirror a new URL—usually a URL which shares a
common ancestor with your working copy, although not necessarily. This is the Subversion way to
move a working copy to a new branch. See the section called “Switching a Working Copy” for an indepth look at switching.
Alternate Names
sw
Changes
Working copy
Accesses Repository
Yes
Switches
--revision (-r) REV
--non-recursive (-N)
--quiet (-q)
--diff3-cmd CMD
--relocate
--username USER
--password PASS
--no-auth-cache
--non-interactive
--config-dir DIR
Examples
If you're currently inside the directory vendors which was branched to vendors-with-fix and
you'd like to switch your working copy to that branch:
$ svn switch http://svn.red-bean.com/repos/branches/vendors-with-fix .
U myproj/foo.txt
U myproj/bar.txt
U myproj/baz.c
U myproj/qux.c
Updated to revision 31.
245
Subversion Complete Reference
And to switch back, just provide the URL to the location in the repository from which you originally
checked out your working copy:
$ svn switch http://svn.red-bean.com/repos/trunk/vendors .
U myproj/foo.txt
U myproj/bar.txt
U myproj/baz.c
U myproj/qux.c
Updated to revision 31.
Tip
You can just switch part of your working copy to a branch if you don't want to switch your
entire working copy.
Sometimes an administrator might change the “base location” of your repository—in other words, the
contents of the repository doesn't change, but the main URL used to reach the root of the repository
does. For example, the hostname may change, the URL scheme, or any part of the URL which leads to
the repository itself. Rather than checkout a new working copy, you can have the svn switch command
“rewrite” the beginnings of all the URLs in your working copy. Use the --relocate option to do the
substitution. No file contents are changed, nor is the repository contacted. It's similar to running a Perl
script over your working copy .svn/ directories which runs s/OldRoot/NewRoot/.
$ svn checkout file:///tmp/repos test
A test/a
A test/b
…
$ mv repos newlocation
$ cd test/
$ svn update
svn: Unable to open an ra_local session to URL
svn: Unable to open repository 'file:///tmp/repos'
$ svn switch --relocate file:///tmp/repos file:///tmp/newlocation .
$ svn update
At revision 3.
Warning
Be careful when using the --relocate option. If you mistype the argument, you might
end up creating nonsensical URLs within your working copy that render the whole workspace unusable and tricky to fix. It's also important to understand exactly when one should
or shouldn't use --relocate. Here's the rule of thumb:
• If the working copy needs to reflect a new directory within the repository, then use just
svn switch.
• If the working copy still reflects the same repository directory, but the location of the repository itself has changed, then use svn switch --relocate.
246
Subversion Complete Reference
Name
svn unlock — Unlock working copy paths or URLs.
Synopsis
svn unlock TARGET...
Description
Unlock each TARGET. If any TARGET is either locked by another user or no valid lock token exists in
the working copy, print a warning and continue unlocking the rest of the TARGETs. Use --force to
break a lock belonging to another user or working copy.
Alternate Names
None
Changes
Working Copy, Repository
Accesses Repository
Yes
Switches
--targets ARG
--username ARG
--password ARG
--no-auth-cache
--non-interactive
--config-dir ARG
--force
Examples
Unlock two files in your working copy:
$ svn unlock tree.jpg house.jpg
'tree.jpg' unlocked.
'house.jpg' unlocked.
Unlock a file in your working copy that is currently locked by another user:
$ svn unlock tree.jpg
svn: 'tree.jpg' is not locked in this working copy
$ svn unlock --force tree.jpg
'tree.jpg' unlocked.
247
Subversion Complete Reference
Unlock a file without a working copy:
$ svn unlock http://svn.red-bean.com/repos/test/tree.jpg
'tree.jpg unlocked.
For further details, see the section called “Locking”.
248
Subversion Complete Reference
Name
svn update — Update your working copy.
Synopsis
svn update [PATH...]
Description
svn update brings changes from the repository into your working copy. If no revision given, it brings
your working copy up-to-date with the HEAD revision. Otherwise, it synchronizes the working copy to
the revision given by the --revision switch. As part of the synchronization, svn update also removes any stale locks (see the section called “svn cleanup”) found in the working copy.
For each updated item a line will start with a character reporting the action taken. These characters have
the following meaning:
A
Added
D
Deleted
U
Updated
C
Conflict
G
Merged
A character in the first column signifies an update to the actual file, while updates to the file's properties
are shown in the second column.
Alternate Names
up
Changes
Working copy
Accesses Repository
Yes
Switches
--revision (-r) REV
--non-recursive (-N)
--quiet (-q)
--diff3-cmd CMD
249
Subversion Complete Reference
--username USER
--password PASS
--no-auth-cache
--non-interactive
--config-dir DIR
--ignore-externals
Examples
Pick up repository changes that have happened since your last update:
$ svn update
A newdir/toggle.c
A newdir/disclose.c
A newdir/launch.c
D newdir/README
Updated to revision 32.
You can also update your working copy to an older revision (Subversion doesn't have the concept of
“sticky” files like CVS does; see Appendix A, Subversion for CVS Users):
$ svn update -r30
A newdir/README
D newdir/toggle.c
D newdir/disclose.c
D newdir/launch.c
U foo.c
Updated to revision 30.
Tip
If you want to examine an older revision of a single file, you may want to use svn cat.
svnadmin
svnadmin is the administrative tool for monitoring and repairing your Subversion repository. For detailed information, see the section called “svnadmin”.
Since svnadmin works via direct repository access (and thus can only be used on the machine that holds
the repository), it refers to the repository with a path, not a URL.
svnadmin Switches
--bdb-log-keep
(Berkeley DB specific) Disable automatic log removal of database log files.
--bdb-txn-nosync
(Berkeley DB specific) Disables fsync when committing database transactions.
--bypass-hooks
Bypass the repository hook system.
250
Subversion Complete Reference
--clean-logs
Removes unused Berkeley DB logs.
--force-uuid
By default, when loading data into repository that already contains revisions, svnadmin will ignore
the UUID from the dump stream. This switch will cause the repository's UUID to be set to the UUID
from the stream.
--ignore-uuid
By default, when loading an empty repository, svnadmin will use the UUID from the dump stream.
This switch will cause that UUID to be ignored.
--incremental
Dump a revision only as a diff against the previous revision, instead of the usual fulltext.
--parent-dir DIR
When loading a dump file, root paths at DIR instead of /.
--revision (-r) ARG
Specify a particular revision to operate on.
--quiet
Do not show normal progress—show only errors.
--use-post-commit-hook
When loading a dump file, run the repository's post-commit hook after finalizing each newly loaded
revision.
--use-pre-commit-hook
When loading a dump file, run the repository's pre-commit hook before finalizing each newly
loaded revision. If the hook fails, abort the commit and terminate the load process.
svnadmin Subcommands
251
Subversion Complete Reference
Name
svnadmin create — Create a new, empty repository.
Synopsis
svnadmin create REPOS_PATH
Description
Create a new, empty repository at the path provided. If the provided directory does not exist, it will be
created for you.1 As of Subversion 1.2, svnadmin creates new repositories with the fsfs filesystem
backend by default.
Switches
--bdb-txn-nosync
--bdb-log-keep
--config-dir DIR
--fs-type TYPE
Examples
Creating a new repository is just this easy:
$ svnadmin create /usr/local/svn/repos
In Subversion 1.0, a Berkeley DB repository is always created. In Subversion 1.1, a Berkeley DB repository is the default repository type, but an FSFS repository can be created using the --fs-type option:
$ svnadmin create /usr/local/svn/repos --fs-type fsfs
1
Remember, svnadmin works only with local paths, not URLs.
252
Subversion Complete Reference
Name
svnadmin deltify — Deltify changed paths in a revision range.
Synopsis
svnadmin deltify [-r LOWER[:UPPER]] REPOS_PATH
Description
svnadmin deltify only exists in 1.0.x due to historical reasons. This command is deprecated and no
longer needed.
It dates from a time when Subversion offered administrators greater control over compression strategies
in the repository. This turned out to be a lot of complexity for very little gain, and this “feature” was deprecated.
Switches
--revision (-r)
--quiet
253
Subversion Complete Reference
Name
svnadmin dump — Dump the contents of filesystem to stdout.
Synopsis
svnadmin dump REPOS_PATH [-r LOWER[:UPPER]] [--incremental]
Description
Dump the contents of filesystem to stdout in a “dumpfile” portable format, sending feedback to stderr.
Dump revisions LOWER rev through UPPER rev. If no revisions are given, dump all revision trees. If
only LOWER is given, dump that one revision tree. See the section called “Migrating a Repository” for a
practical use.
By default, the Subversion dumpfile stream contains a single revision (the first revision in the requested
revision range) in which every file and directory in the repository in that revision is presented as if that
whole tree was added at once, followed by other revisions (the remainder of the revisions in the requested range) which contain only the files and directories which were modified in those revisions. For a
modified file, the complete fulltext representation of its contents, as well as all of its properties, are
presented in the dumpfile; for a directory, all of its properties are presented.
There are a pair of useful options which modify the dumpfile generator's behavior. The first is the -incremental option, which simply causes that first revision in the dumpfile stream to contain only
the files and directories modified in that revision, instead of being presented as the addition of a new
tree, and in exactly the same way that every other revision in the dumpfile is presented. This is useful for
generating a dumpfile that is to be loaded into another repository which already has the files and directories that exist in the original repository.
The second useful option is --deltas. This switch causes svnadmin dump to, instead of emitting
fulltext representations of file contents and property lists, emit only deltas of those items against their
previous versions. This reduces (in some cases, drastically) the size of the dumpfile that svnadmin
dump creates. There are, however, disadvantages to using this option—deltified dumpfiles are more
CPU intensive to create, cannot be operated on by svndumpfilter, and tend not to compress as well as
their non-deltified counterparts when using third-party tools like gzip and bzip2.
Switches
--revision (-r)
--incremental
--quiet
--deltas
Examples
Dump your whole repository:
$ svnadmin dump /usr/local/svn/repos
SVN-fs-dump-format-version: 1
Revision-number: 0
* Dumped revision 0.
Prop-content-length: 56
Content-length: 56
…
254
Subversion Complete Reference
Incrementally dump a single transaction from your repository:
$ svnadmin dump /usr/local/svn/repos -r 21 --incremental
* Dumped revision 21.
SVN-fs-dump-format-version: 1
Revision-number: 21
Prop-content-length: 101
Content-length: 101
…
255
Subversion Complete Reference
Name
svnadmin help
Synopsis
svnadmin help [SUBCOMMAND...]
Description
This subcommand is useful when you're trapped on a desert island with neither a net connection nor a
copy of this book.
Alternate Names
?, h
256
Subversion Complete Reference
Name
svnadmin hotcopy — Make a hot copy of a repository.
Synopsis
svnadmin hotcopy REPOS_PATH NEW_REPOS_PATH
Description
This subcommand makes a full “hot” backup of your repository, including all hooks, configuration files,
and, of course, database files. If you pass the --clean-logs switch, svnadmin will perform a hotcopy of your repository, and then remove unused Berkeley DB logs from the original repository. You
can run this command at any time and make a safe copy of the repository, regardless of whether other
processes are using the repository.
Switches
--clean-logs
257
Subversion Complete Reference
Name
svnadmin list-dblogs — Ask Berkeley DB which log files exist for a given Subversion repository
(applies only to repositories using the bdb backend).
Synopsis
svnadmin list-dblogs REPOS_PATH
Description
Berkeley DB creates logs of all changes to the repository, which allow it to recover in the face of catastrophe. Unless you enable DB_LOG_AUTOREMOVE, the log files accumulate, although most are no
longer used and can be deleted to reclaim disk space. See the section called “Managing Disk Space” for
more information.
258
Subversion Complete Reference
Name
svnadmin list-unused-dblogs — Ask Berkeley DB which log files can be safely deleted (applies only to
repositories using the bdb backend).
Synopsis
svnadmin list-unused-dblogs REPOS_PATH
Description
Berkeley DB creates logs of all changes to the repository, which allow it to recover in the face of catastrophe. Unless you enable DB_LOG_AUTOREMOVE, the log files accumulate, although most are no
longer used and can be deleted to reclaim disk space. See the section called “Managing Disk Space” for
more information.
Examples
Remove all unused log files from a repository:
$ svnadmin list-unused-dblogs /path/to/repos
/path/to/repos/log.0000000031
/path/to/repos/log.0000000032
/path/to/repos/log.0000000033
$ svnadmin list-unused-dblogs /path/to/repos | xargs rm
## disk space reclaimed!
259
Subversion Complete Reference
Name
svnadmin load — Read a “dumpfile”-formatted stream from stdin.
Synopsis
svnadmin load REPOS_PATH
Description
Read a “dumpfile”-formatted stream from stdin, committing new revisions into the repository's filesystem. Send progress feedback to stdout.
Switches
--quiet (-q)
--ignore-uuid
--force-uuid
--use-pre-commit-hook
--use-post-commit-hook
--parent-dir
Example
This shows the beginning of loading a repository from a backup file (made, of course, with svnadmin
dump):
$ svnadmin load /usr/local/svn/restored < repos-backup
<<< Started new txn, based on original revision 1
* adding path : test ... done.
* adding path : test/a ... done.
…
Or if you want to load into a subdirectory:
$ svnadmin load --parent-dir new/subdir/for/project /usr/local/svn/restored < repos
<<< Started new txn, based on original revision 1
* adding path : test ... done.
* adding path : test/a ... done.
…
260
Subversion Complete Reference
Name
svnadmin lslocks — Print descriptions of all locks.
Synopsis
svnadmin lslocks REPOS_PATH
Description
Print descriptions of all locks in a repository.
Switches
None
Example
This lists the one locked file in the repository at /svn/repos
$ svnadmin lslocks /svn/repos
Path: /tree.jpg
UUID Token: opaquelocktoken:ab00ddf0-6afb-0310-9cd0-dda813329753
Owner: harry
Created: 2005-07-08 17:27:36 -0500 (Fri, 08 Jul 2005)
Expires:
Comment (1 line):
Rework the uppermost branches on the bald cypress in the foreground.
261
Subversion Complete Reference
Name
svnadmin lstxns — Print the names of all uncommitted transactions.
Synopsis
svnadmin lstxns REPOS_PATH
Description
Print the names of all uncommitted transactions. See the section called “Repository Cleanup” for information on how uncommitted transactions are created and what you should do with them.
Examples
List all outstanding transactions in a repository.
$ svnadmin lstxns /usr/local/svn/repos/
1w
1x
262
Subversion Complete Reference
Name
svnadmin recover — Bring a repository database back into a consistent state (applies only to repositories
using the bdb backend). In addition, if repos/conf/passwd does not exist, it will create a default
password file .
Synopsis
svnadmin recover REPOS_PATH
Description
Run this command if you get an error indicating that your repository needs to be recovered.
Switches
--wait
Examples
Recover a hung repository:
$ svnadmin recover /usr/local/svn/repos/
Repository lock acquired.
Please wait; recovering the repository may take some time...
Recovery completed.
The latest repos revision is 34.
Recovering the database requires an exclusive lock on the repository. (This is a “database lock”; see
Three meanings of “lock”.) If another process is accessing the repository, then svnadmin recover will
error:
$ svnadmin recover /usr/local/svn/repos
svn: Failed to get exclusive repository access; perhaps another process
such as httpd, svnserve or svn has it open?
$
The --wait option, however, will cause svnadmin recover to wait indefinitely for other processes to
disconnect:
$ svnadmin recover /usr/local/svn/repos --wait
Waiting on repository lock; perhaps another process has it open?
### time goes by…
Repository lock acquired.
Please wait; recovering the repository may take some time...
Recovery completed.
The latest repos revision is 34.
263
Subversion Complete Reference
264
Subversion Complete Reference
Name
svnadmin rmlocks — Unconditionally remove one or more locks from a repository.
Synopsis
svnadmin rmlocks REPOS_PATH LOCKED_PATH...
Description
Remove lock from each LOCKED_PATH.
Switches
None
Example
This deletes the locks on tree.jpg and house.jpg in the repository at /svn/repos
$ svnadmin rmlocks /svn/repos tree.jpg house.jpg
Removed lock on '/tree.jpg.
Removed lock on '/house.jpg.
265
Subversion Complete Reference
Name
svnadmin rmtxns — Delete transactions from a repository.
Synopsis
svnadmin rmtxns REPOS_PATH TXN_NAME...
Description
Delete outstanding transactions from a repository. This is covered in detail in the section called
“Repository Cleanup”.
Switches
--quiet (-q)
Examples
Remove named transactions:
$ svnadmin rmtxns /usr/local/svn/repos/ 1w 1x
Fortunately, the output of lstxns works great as the input for rmtxns:
$ svnadmin rmtxns /usr/local/svn/repos/
`svnadmin lstxns /usr/local/svn/repos/`
Which will remove all uncommitted transactions from your repository.
266
Subversion Complete Reference
Name
svnadmin setlog — Set the log-message on a revision.
Synopsis
svnadmin setlog REPOS_PATH -r REVISION FILE
Description
Set the log-message on revision REVISION to the contents of FILE.
This is similar to using svn propset --revprop to set the svn:log property on a revision, except that
you can also use the option --bypass-hooks to avoid running any pre- or post-commit hooks, which
is useful if the modification of revision properties has not been enabled in the pre-revprop-change hook.
Warning
Revision properties are not under version control, so this command will permanently overwrite the previous log message.
Switches
--revision (-r) ARG
--bypass-hooks
Examples
Set the log message for revision 19 to the contents of the file msg:
$ svnadmin setlog /usr/local/svn/repos/ -r 19 msg
267
Subversion Complete Reference
Name
svnadmin verify — Verify the data stored in the repository.
Synopsis
svnadmin verify REPOS_PATH
Description
Run this command if you wish to verify the integrity of your repository. This basically iterates through
all revisions in the repository by internally dumping all revisions and discarding the output.
Examples
Verify a hung repository:
$ svnadmin verify /usr/local/svn/repos/
* Verified revision 1729.
svnlook
svnlook is a command-line utility for examining different aspects of a Subversion repository. It does not
make any changes to the repository—it's just used for “peeking”. svnlook is typically used by the repository hooks, but a repository administrator might find it useful for diagnostic purposes.
Since svnlook works via direct repository access (and thus can only be used on the machine that holds
the repository), it refers to the repository with a path, not a URL.
If no revision or transaction is specified, svnlook defaults to the youngest (most recent) revision of the
repository.
svnlook Switches
Switches in svnlook are global, just like in svn and svnadmin; however, most switches only apply to
one subcommand since the functionality of svnlook is (intentionally) limited in scope.
--no-diff-deleted
Prevents svnlook from printing differences for deleted files. The default behavior when a file is deleted in a transaction/revision is to print the same differences that you would see if you had left the
file but removed all the content.
--revision (-r)
Specify a particular revision number that you wish to examine.
--revprop
Operates on a revision property instead of a Subversion property specific to a file or directory. This
switch requires that you also pass a revision with the --revision (-r) switch. See the section
called “Unversioned Properties” for more details on unversioned properties.
--transaction (-t)
Specify a particular transaction ID that you wish to examine.
268
Subversion Complete Reference
--show-ids
Show the filesystem node revision IDs for each path in the filesystem tree.
svnlook
269
Subversion Complete Reference
Name
svnlook author — Print the author.
Synopsis
svnlook author REPOS_PATH
Description
Print the author of a revision or transaction in the repository.
Switches
--revision (-r)
--transaction (-t)
Examples
svnlook author is handy, but not very exciting:
$ svnlook author -r 40 /usr/local/svn/repos
sally
270
Subversion Complete Reference
Name
svnlook cat — Print the contents of a file.
Synopsis
svnlook cat REPOS_PATH PATH_IN_REPOS
Description
Print the contents of a file.
Switches
--revision (-r)
--transaction (-t)
Examples
This shows the contents of a file in transaction ax8, located at /trunk/README:
$ svnlook cat -t ax8 /usr/local/svn/repos /trunk/README
Subversion, a version control system.
=====================================
$LastChangedDate: 2003-07-17 10:45:25 -0500 (Thu, 17 Jul 2003) $
Contents:
I. A FEW POINTERS
II. DOCUMENTATION
III. PARTICIPATING IN THE SUBVERSION COMMUNITY
…
271
Subversion Complete Reference
Name
svnlook changed — Print the paths that were changed.
Synopsis
svnlook changed REPOS_PATH
Description
Print the paths that were changed in a particular revision or transaction, as well as “svn update-style”
status letters in the first two columns:
'A '
Item added to repository.
'D '
Item deleted from repository.
'U '
File contents changed.
'_U'
Properties of item changed.
'UU'
File contents and properties changed.
Files and directories can be distinguished, as directory paths are displayed with a trailing '/' character.
Switches
--revision (-r)
--transaction (-t)
Examples
This shows a list of all the changed files in revision 39 of a test repository:
$ svnlook changed -r 39 /usr/local/svn/repos
A
trunk/vendors/deli/
A
trunk/vendors/deli/chips.txt
A
trunk/vendors/deli/sandwich.txt
A
trunk/vendors/deli/pickle.txt
U
trunk/vendors/baker/bagel.txt
_U trunk/vendors/baker/croissant.txt
UU trunk/vendors/baker/pretzel.txt
D
trunk/vendors/baker/baguette.txt
272
Subversion Complete Reference
Name
svnlook date — Print the datestamp.
Synopsis
svnlook date REPOS_PATH
Description
Print the datestamp of a revision or transaction in a repository.
Switches
--revision (-r)
--transaction (-t)
Examples
This shows the date of revision 40 of a test repository:
$ svnlook date -r 40 /tmp/repos/
2003-02-22 17:44:49 -0600 (Sat, 22 Feb 2003)
273
Subversion Complete Reference
Name
svnlook diff — Print differences of changed files and properties.
Synopsis
svnlook diff REPOS_PATH
Description
Print GNU-style differences of changed files and properties in a repository.
Switches
--revision (-r)
--transaction (-t)
--no-diff-added
--no-diff-deleted
Examples
This shows a newly added (empty) file, a deleted file, and a copied file:
$ svnlook diff -r 40 /usr/local/svn/repos/
Copied: egg.txt (from rev 39, trunk/vendors/deli/pickle.txt)
Added: trunk/vendors/deli/soda.txt
==============================================================================
Modified: trunk/vendors/deli/sandwich.txt
==============================================================================
--- trunk/vendors/deli/sandwich.txt (original)
+++ trunk/vendors/deli/sandwich.txt 2003-02-22 17:45:04.000000000 -0600
@@ -0,0 +1 @@
+Don't forget the mayo!
Modified: trunk/vendors/deli/logo.jpg
==============================================================================
(Binary files differ)
Deleted: trunk/vendors/deli/chips.txt
==============================================================================
Deleted: trunk/vendors/deli/pickle.txt
==============================================================================
If a file has a non-textual svn:mime-type property, then the differences are not explicitly shown.
274
Subversion Complete Reference
Name
svnlook dirs-changed — Print the directories that were themselves changed.
Synopsis
svnlook dirs-changed REPOS_PATH
Description
Print the directories that were themselves changed (property edits) or whose file children were changed.
Switches
--revision (-r)
--transaction (-t)
Examples
This shows the directories that changed in revision 40 in our sample repository:
$ svnlook dirs-changed -r 40 /usr/local/svn/repos
trunk/vendors/deli/
275
Subversion Complete Reference
Name
svnlook help
Synopsis
Also svnlook -h and svnlook -?.
Description
Displays the help message for svnlook. This command, like its brother svn help, is also your friend,
even though you never call it anymore and forgot to invite it to your last party.
Alternate Names
?, h
276
Subversion Complete Reference
Name
svnlook history — Print information about the history of a path in the repository (or the root directory if
no path is supplied).
Synopsis
svnlook history REPOS_PATH [PATH_IN_REPOS]
Description
Print information about the history of a path in the repository (or the root directory if no path is supplied).
Switches
--revision (-r)
--show-ids
Examples
This shows the history output for the path /tags/1.0 as of revision 20 in our sample repository.
$ svnlook history -r 20 /usr/local/svn/repos /tags/1.0 --show-ids
REVISION
PATH <ID>
---------------19
/tags/1.0 <1.2.12>
17
/branches/1.0-rc2 <1.1.10>
16
/branches/1.0-rc2 <1.1.x>
14
/trunk <1.0.q>
13
/trunk <1.0.o>
11
/trunk <1.0.k>
9
/trunk <1.0.g>
8
/trunk <1.0.e>
7
/trunk <1.0.b>
6
/trunk <1.0.9>
5
/trunk <1.0.7>
4
/trunk <1.0.6>
2
/trunk <1.0.3>
1
/trunk <1.0.2>
277
Subversion Complete Reference
Name
svnlook info — Print the author, datestamp, log message size, and log message.
Synopsis
svnlook info REPOS_PATH
Description
Print the author, datestamp, log message size, and log message.
Switches
--revision (-r)
--transaction (-t)
Examples
This shows the info output for revision 40 in our sample repository.
$ svnlook info -r 40 /usr/local/svn/repos
sally
2003-02-22 17:44:49 -0600 (Sat, 22 Feb 2003)
15
Rearrange lunch.
278
Subversion Complete Reference
Name
svnlook lock — If a lock exists on a path in the repository, describe it.
Synopsis
svnlook lock REPOS_PATH PATH_IN_REPOS
Description
Print all information available for the lock at PATH_IN_REPOS. If PATH_IN_REPOS is not locked,
print nothing.
Switches
None
Examples
This describes the lock on the file tree.jpg.
$ svnlook lock /svn/repos tree.jpg
UUID Token: opaquelocktoken:ab00ddf0-6afb-0310-9cd0-dda813329753
Owner: harry
Created: 2005-07-08 17:27:36 -0500 (Fri, 08 Jul 2005)
Expires:
Comment (1 line):
Rework the uppermost branches on the bald cypress in the foreground.
279
Subversion Complete Reference
Name
svnlook log — Print the log message.
Synopsis
svnlook log REPOS_PATH
Description
Print the log message.
Switches
--revision (-r)
--transaction (-t)
Examples
This shows the log output for revision 40 in our sample repository:
$ svnlook log /tmp/repos/
Rearrange lunch.
280
Subversion Complete Reference
Name
svnlook propget — Print the raw value of a property on a path in the repository.
Synopsis
svnlook propget REPOS_PATH PROPNAME [PATH_IN_REPOS]
Description
List the value of a property on a path in the repository.
Alternate Names
pg, pget
Switches
--revision (-r)
--transaction (-t)
--revprop
Examples
This shows the value of the “seasonings” property on the file /trunk/sandwich in the HEAD revision:
$ svnlook pg /usr/local/svn/repos seasonings /trunk/sandwich
mustard
281
Subversion Complete Reference
Name
svnlook proplist — Print the names and values of versioned file and directory properties.
Synopsis
svnlook proplist REPOS_PATH [PATH_IN_REPOS]
Description
List the properties of a path in the repository. With --verbose, show the property values too.
Alternate Names
pl, plist
Switches
--revision (-r)
--transaction (-t)
--verbose (-v)
--revprop
Examples
This shows the names of properties set on the file /trunk/README in the HEAD revision:
$ svnlook proplist /usr/local/svn/repos /trunk/README
original-author
svn:mime-type
This is the same command as in the previous example, but this time showing the property values as well:
$ svnlook --verbose proplist /usr/local/svn/repos /trunk/README
original-author : fitz
svn:mime-type : text/plain
282
Subversion Complete Reference
Name
svnlook tree — Print the tree.
Synopsis
svnlook tree REPOS_PATH [PATH_IN_REPOS]
Description
Print the tree, starting at PATH_IN_REPOS (if supplied, at the root of the tree otherwise), optionally
showing node revision IDs.
Switches
--revision (-r)
--transaction (-t)
--show-ids
Examples
This shows the tree output (with node-IDs) for revision 40 in our sample repository:
$ svnlook tree -r 40 /usr/local/svn/repos --show-ids
/ <0.0.2j>
trunk/ <p.0.2j>
vendors/ <q.0.2j>
deli/ <1g.0.2j>
egg.txt <1i.e.2j>
soda.txt <1k.0.2j>
sandwich.txt <1j.0.2j>
283
Subversion Complete Reference
Name
svnlook uuid — Print the repository's UUID.
Synopsis
svnlook uuid REPOS_PATH
Description
Print the UUID for the repository. the UUID is the repository's universal unique identifier. The Subversion client uses this identifier to differentiate between one repository and another.
Examples
$ svnlook uuid /usr/local/svn/repos
e7fe1b91-8cd5-0310-98dd-2f12e793c5e8
284
Subversion Complete Reference
Name
svnlook youngest — Print the youngest revision number.
Synopsis
svnlook youngest REPOS_PATH
Description
Print the youngest revision number of a repository.
Examples
This shows the youngest revision of our sample repository:
$ svnlook youngest /tmp/repos/
42
svnserve
svnserve allows access to Subversion repositories using the svn network protocol. You can run svnserve either as a standalone server process, or you can have another process, such as inetd, xinetd or
sshd, launch it for you.
Once the client has selected a repository by transmitting its URL, svnserve reads a file named conf/
svnserve.conf in the repository directory to determine repository-specific settings such as what authentication database to use and what authorization policies to apply. See the section called “svnserve, a
custom server” for details of the svnserve.conf file.
svnserve Switches
Unlike the previous commands we've described. svnserve has no subcommands—svnserve is controlled
exclusively by switches.
--daemon (-d)
Causes svnserve to run in daemon mode. svnserve backgrounds itself and accepts and serves TCP/
IP connections on the svn port (3690, by default).
--listen-port=PORT
Causes svnserve to listen on PORT when run in daemon mode.
--listen-host=HOST
Causes svnserve to listen on the interface specified by HOST, which may be either a hostname or an
IP address.
--foreground
When used together with -d, this switch causes svnserve to stay in the foreground. This switch is
mainly useful for debugging.
--inetd (-i)
Causes svnserve to use the stdin/stdout file descriptors, as is appropriate for a daemon running out
285
Subversion Complete Reference
of inetd.
--help (-h)
Displays a usage summary and exits.
--version
Displays version information, a list of repository back-end modules available, and exits.
--root=ROOT (-r=ROOT)
Sets the virtual root for repositories served by svnserve. The pathname in URLs provided by the client will be interpreted relative to this root, and will not be allowed to escape this root.
--tunnel (-t)
Causes svnserve to run in tunnel mode, which is just like the inetd mode of operation (serve one
connection over stdin/stdout) except that the connection is considered to be pre-authenticated with
the username of the current uid. This flag is selected by the client when running over a tunnel agent
such as ssh.
--tunnel-user NAME
Used in conjunction with --tunnel switch; tells svnserve to assume that NAME is the authenticated user, rather than the UID of the svnserve process. Useful for users wishing to share a single
system account over SSH, but maintaining separate commit identities.
--threads (-T)
When running in daemon mode, causes svnserve to spawn a thread instead of a process for each
connection. The svnserve process still backgrounds itself at startup time.
--listen-once (-X)
Causes svnserve to accept one connection on the svn port, serve it, and exit. This option is mainly
useful for debugging.
svnversion
286
Subversion Complete Reference
Name
svnversion — Summarize the local revision(s) of a working copy.
Synopsis
svnversion [OPTIONS] WC_PATH [TRAIL_URL]
Description
svnversion is a program for summarizing the revision mixture of a working copy. The resultant revision
number, or revision range, is written to standard output.
TRAIL_URL, if present, is the trailing portion of the URL used to determine if WC_PATH itself is
switched (detection of switches within WC_PATH does not rely on TRAIL_URL).
Switches
Like svnserve, svnversion has no subcommands, it only has switches.
--no-newline (-n)
Omit the usual trailing newline from the output.
--committed (-c)
Use the last-changed revisions rather than the current (i.e., highest locally available) revisions.
--help (-h)
Print a help summary.
--version
Print the version of svnversion and exit with no error.
Examples
If the working copy is all at the same revision (for example, immediately after an update), then that revision is printed out:
$ svnversion .
4168
You can add TRAIL_URL to show that the working copy is not switched from what you expect:
$ svnversion . /repos/svn/trunk
4168
For a mixed-revision working copy, the range of revisions present is printed:
$ svnversion .
4123:4168
If the working copy contains modifications, a trailing "M" is added:
287
Subversion Complete Reference
$ svnversion .
4168M
If the working copy is switched, a trailing "S" is added:
$ svnversion .
4168S
Thus, here is a mixed-revision, switched working copy containing some local modifications:
$ svnversion .
4212:4168MS
If invoked on a directory that is not a working copy, svnversion assumes it is an exported working copy
and prints "exported":
$ svnversion .
exported
mod_dav_svn
288
Subversion Complete Reference
Name
mod_dav_svn Configuration Directives — Apache configuration directives for serving Subversion repositories through Apache HTTP Server.
Description
This section briefly describes each of the Subversion Apache configuration directives. For an in-depth
description of configuring Apache with Subversion, see the section called “httpd, the Apache HTTP
server”.)
Directives
DAV svn
This directive must be included in any Directory or Location block for a Subversion repository. It tells httpd to use the Subversion backend for mod_dav to handle all requests.
SVNAutoversioning On
This directive allows write requests from WebDAV clients to result in automatic commits. A generic log message is auto-generated and attached to each revision. If you enable Autoversioning, you'll
likely want to set ModMimeUsePathInfo On so that mod_mime can set svn:mime-type to
the correct mime-type automatically (as best as mod_mime is able to, of course). For more information, see Appendix B, WebDAV and Autoversioning
SVNPath
This directive specifies the location in the filesystem for a Subversion repository's files. In a configuration block for a Subversion repository, either this directive or SVNParentPath must be
present, but not both.
SVNSpecialURI
Specifies the URI component (namespace) for special Subversion resources. The default is “!svn”,
and most administrators will never use this directive. Only set this if there is a pressing need to have
a file named !svn in your repository. If you change this on a server already in use, it will break all
of the outstanding working copies and your users will hunt you down with pitchforks and flaming
torches.
SVNReposName
Specifies the name of a Subversion repository for use in HTTP GET requests. This value will be
prepended to the title of all directory listings (which are served when you navigate to a Subversion
repository with a web browser). This directive is optional.
SVNIndexXSLT
Specifies the URI of an XSL transformation for directory indexes. This directive is optional.
SVNParentPath
Specifies the location in the filesystem of a parent directory whose child directories are Subversion
repositories. In a configuration block for a Subversion repository, either this directive or SVNPath
must be present, but not both.
SVNPathAuthz
Control path-based authorization by enabling or disabling subrequests. See the section called
“Disabling Path-based Checks” for details.
Subversion properties
289
Subversion Complete Reference
Name
Subversion-defined properties — properties defined by Subversion to control behavior.
Description
Subversion allows users to invent arbitrarily-named versioned properties on files and directories, as well
as unversioned properties on revisions. The only restriction is on properties prefixed with “svn:”. Properties in that namespace are reserved for Subversion's own use. While these properties may be set by
users to control Subversion's behavior, users may not invent new “svn:” properties.
Versioned Properties
svn:executable
If present on a file, the client will make the file executable in Unix-hosted working copies. See the
section called “svn:executable”.
svn:mime-type
If present on a file, the value indicates the file's mime-type. This allows the client to decide whether
line-based contextual merging is safe to perform during updates, and can also affect how the file behaves when fetched via web browser. See the section called “svn:mime-type”.
svn:ignore
If present on a directory, the value is a list of unversioned file patterns to be ignored by svn status
and other subcommands. See the section called “svn:ignore”
svn:keywords
If present on a file, the value tells the client how to expand particular keywords within the file. See
the section called “svn:keywords”.
svn:eol-style
If present on a file, the value tells the client how to manipulate the file's line-endings in the working
copy. See the section called “svn:eol-style”.
svn:externals
If present on a directory, the value is a multi-line list of other paths and URLs the client should
check out. See the section called “svn:externals”.
svn:special
If present on a file, indicates that the file is not an ordinary file, but a symbolic link or other special
object. See the section called “svn:special”.
svn:needs-lock
If present on a file, tells the client to make the file read-only in the working copy, as a reminder that
the file should be locked before editing begins. See the section called “Lock Communication”.
Unversioned Properties
svn:author
If present, contains the authenticated username of the person who created the revision. (If not
present, then the revision was committed anonymously.)
svn:date
Contains the UTC time the revision was created, in ISO format. The value comes from the server
290
Subversion Complete Reference
machine's clock.
svn:log
Contains the log message describing the revision.
svn:autoversioned
If present, the revision was created via the autoversioning feature. See the section called
“Autoversioning”.
291
Appendix A. Subversion for CVS Users
This appendix is a guide for CVS users new to Subversion. It's essentially a list of differences between
the two systems as “viewed from 10,000 feet”. For each section, we provide backreferences to relevant
chapters when possible.
Although the goal of Subversion is to take over the current and future CVS user base, some new features
and design changes were required to fix certain “broken” behaviors that CVS had. This means that, as a
CVS user, you may need to break habits—ones that you forgot were odd to begin with.
Revision Numbers Are Different Now
In CVS, revision numbers are per-file. This is because CVS stores its data in RCS files; each file has a
corresponding RCS file in the repository, and the repository is roughly laid out according to the structure
of your project tree.
In Subversion, the repository looks like a single filesystem. Each commit results in an entirely new
filesystem tree; in essence, the repository is an array of trees. Each of these trees is labeled with a single
revision number. When someone talks about “revision 54”, they're talking about a particular tree (and
indirectly, the way the filesystem looked after the 54th commit).
Technically, it's not valid to talk about “revision 5 of foo.c”. Instead, one would say “foo.c as it appears in revision 5”. Also, be careful when making assumptions about the evolution of a file. In CVS, revisions 5 and 6 of foo.c are always different. In Subversion, it's most likely that foo.c did not
change between revisions 5 and 6.
For more details on this topic, see the section called “Revisions”.
Directory Versions
Subversion tracks tree structures, not just file contents. It's one of the biggest reasons Subversion was
written to replace CVS.
Here's what this means to you, as a former CVS user:
• The svn add and svn delete commands work on directories now, just as they work on files. So do svn
copy and svn move. However, these commands do not cause any kind of immediate change in the repository. Instead, the working items are simply “scheduled” for addition or deletion. No repository
changes happen until you run svn commit.
• Directories aren't dumb containers anymore; they have revision numbers like files. (Or more properly,
it's correct to talk about “directory foo/ in revision 5”.)
Let's talk more about that last point. Directory versioning is a hard problem; because we want to allow
mixed-revision working copies, there are some limitations on how far we can abuse this model.
From a theoretical point of view, we define “revision 5 of directory foo” to mean a specific collection
of directory-entries and properties. Now suppose we start adding and removing files from foo, and then
commit. It would be a lie to say that we still have revision 5 of foo. However, if we bumped foo's revision number after the commit, that would be a lie too; there may be other changes to foo we haven't yet
received, because we haven't updated yet.
Subversion deals with this problem by quietly tracking committed adds and deletes in the .svn area.
292
Subversion for CVS Users
When you eventually run svn update, all accounts are settled with the repository, and the directory's
new revision number is set correctly. Therefore, only after an update is it truly safe to say that you have
a “perfect” revision of a directory. Most of the time, your working copy will contain “imperfect” directory revisions.
Similarly, a problem arises if you attempt to commit property changes on a directory. Normally, the
commit would bump the working directory's local revision number. But again, that would be a lie, because there may be adds or deletes that the directory doesn't yet have, because no update has happened.
Therefore, you are not allowed to commit property-changes on a directory unless the directory is upto-date.
For more discussion about the limitations of directory versioning, see the section called “Mixed Revision Working Copies”.
More Disconnected Operations
In recent years, disk space has become outrageously cheap and abundant, but network bandwidth has
not. Therefore, the Subversion working copy has been optimized around the scarcer resource.
The .svn administrative directory serves the same purpose as the CVS directory, except that it also
stores read-only, “pristine” copies of your files. This allows you to do many things off-line:
svn status
Shows you any local changes you've made (see the section called “svn status”)
svn diff
Shows you the details of your changes (see the section called “svn diff”)
svn revert
Removes your local changes (see the section called “svn revert”)
Also, the cached pristine files allow the Subversion client to send differences when committing, which
CVS cannot do.
The last subcommand in the list is new; it will not only remove local changes, but it will un-schedule operations such as adds and deletes. It's the preferred way to revert a file; running rm file; svn update will
still work, but it blurs the purpose of updating. And, while we're on this subject…
Distinction Between Status and Update
In Subversion, we've tried to erase a lot of the confusion between the cvs status and cvs update commands.
The cvs status command has two purposes: first, to show the user any local modifications in the working copy, and second, to show the user which files are out-of-date. Unfortunately, because of CVS's
hard-to-read status output, many CVS users don't take advantage of this command at all. Instead, they've
developed a habit of running cvs update or cvs -n update to quickly see their changes. If users forget to
use the -n option, this has the side effect of merging repository changes they may not be ready to deal
with.
With Subversion, we've tried to remove this muddle by making the output of svn status easy to read for
both humans and parsers. Also, svn update only prints information about files that are updated, not local modifications.
Status
293
Subversion for CVS Users
svn status prints all files that have local modifications. By default, the repository is not contacted. While
this subcommand accepts a fair number of options, the following are the most commonly used ones:
-u
Contact the repository to determine, and then display, out-of-dateness information.
-v
Show all entries under version control.
-N
Run non-recursively (do not descend into subdirectories).
The status command has two output formats. In the default “short” format, local modifications look like
this:
$ svn status
M
foo.c
M
bar/baz.c
If you specify the --show-updates (-u) switch, a longer output format is used:
$ svn status -u
M
1047
foo.c
*
1045
faces.html
*
bloo.png
M
1050
bar/baz.c
Status against revision:
1066
In this case, two new columns appear. The second column contains an asterisk if the file or directory is
out-of-date. The third column shows the working-copy's revision number of the item. In the example
above, the asterisk indicates that faces.html would be patched if we updated, and that bloo.png is
a newly added file in the repository. (The absence of any revision number next to bloo.png means
that it doesn't yet exist in the working copy.)
Lastly, here's a quick summary of the most common status codes that you may see:
A
D
M
C
X
?
!
Resource is scheduled for Addition
Resource is scheduled for Deletion
Resource has local Modifications
Resource has Conflicts (changes have not been completely merged
between the repository and working copy version)
Resource is eXternal to this working copy (may come from another
repository). See the section called “svn:externals”
Resource is not under version control
Resource is missing or incomplete (removed by another tool than
Subversion)
For a more detailed discussion of svn status, see the section called “svn status”.
Update
svn update updates your working copy, and only prints information about files that it updates.
294
Subversion for CVS Users
Subversion has combined the CVS P and U codes into just U. When a merge or conflict occurs, Subversion simply prints G or C, rather than a whole sentence about it.
For a more detailed discussion of svn update, see the section called “Update Your Working Copy”.
Branches and Tags
Subversion doesn't distinguish between filesystem space and “branch” space; branches and tags are ordinary directories within the filesystem. This is probably the single biggest mental hurdle a CVS user
will need to climb. Read all about it in Chapter 4, Branching and Merging.
Warning
Since Subversion treats branches and tags as ordinary directories, always remember to
check out the trunk (http://svn.example.com/repos/calc/trunk/) of
your
project,
and
not
the
project
itself
(http://svn.example.com/repos/calc/). If you make the mistake of checking
out the project itself, you'll wind up with a working copy that contains a copy of your
project for every branch and tag you have.1
Metadata Properties
A new feature of Subversion is that you can attach arbitrary metadata (or “properties”) to files and directories. Properties are arbitrary name/value pairs associated with files and directories in your working
copy.
To set or get a property name, use the svn propset and svn propget subcommands. To list all properties
on an object, use svn proplist.
For more information, see the section called “Properties”.
Conflict Resolution
CVS marks conflicts with in-line “conflict markers”, and prints a C during an update. Historically, this
has caused problems, because CVS isn't doing enough. Many users forget about (or don't see) the C after
it whizzes by on their terminal. They often forget that the conflict-markers are even present, and then accidentally commit files containing conflict-markers.
Subversion solves this problem by making conflicts more tangible. It remembers that a file is in a state
of conflict, and won't allow you to commit your changes until you run svn resolved. See the section
called “Resolve Conflicts (Merging Others' Changes)” for more details.
Binary Files and Translation
In the most general sense, Subversion handles binary files more gracefully than CVS does. Because
CVS uses RCS, it can only store successive full copies of a changing binary file. Subversion, however,
expresses differences between files using a binary-differencing algorithm, regardless of whether they
contain textual or binary data. That means that all files are stored differentially (compressed) in the repository.
CVS users have to mark binary files with -kb flags, to prevent data from being garbled (due to keyword
1
That is, providing you don't run out of disk space before your checkout finishes.
295
Subversion for CVS Users
expansion and line-ending translations). They sometimes forget to do this.
Subversion takes the more paranoid route—first, it never performs any kind of keyword or line-ending
translation unless you explicitly ask it do so (see the section called “svn:keywords” and the section
called “svn:eol-style” for more details). By default, Subversion treats all file data as literal byte
strings, and files are always stored in the repository in an untranslated state.
Second, Subversion maintains an internal notion of whether a file is “text” or “binary” data, but this notion is only extant in the working copy. During an svn update, Subversion will perform contextual
merges on locally modified text files, but will not attempt to do so for binary files.
To determine whether a contextual merge is possible, Subversion examines the svn:mime-type
property. If the file has no svn:mime-type property, or has a mime-type that is textual (e.g.
text/*), Subversion assumes it is text. Otherwise, Subversion assumes the file is binary. Subversion
also helps users by running a binary-detection algorithm in the svn import and svn add commands.
These commands will make a good guess and then (possibly) set a binary svn:mime-type property
on the file being added. (If Subversion guesses wrong, the user can always remove or hand-edit the
property.)
Versioned Modules
Unlike CVS, a Subversion working copy is aware that it has checked out a module. That means that if
somebody changes the definition of a module (e.g. adds or removes components), then a call to svn update will update the working copy appropriately, adding and removing components.
Subversion defines modules as a list of directories within a directory property: see the section called
“Externals Definitions”.
Authentication
With CVS's pserver, you are required to “login” to the server before any read or write operation—you
even have to login for anonymous operations. With a Subversion repository using Apache httpd or svnserve as the server, you don't provide any authentication credentials at the outset—if an operation that
you perform requires authentication, the server will challenge you for your credentials (whether those
credentials are username and password, a client certificate, or even both). So if your repository is worldreadable, you will not be required to authenticate at all for read operations.
As with CVS, Subversion still caches your credentials on disk (in your ~/.subversion/auth/ directory) unless you tell it not to by using the --no-auth-cache switch.
The exception to this behavior, however, is in the case of accessing an svnserve server over an SSH tunnel, using the svn+ssh:// URL schema. In that case, the ssh program unconditionally demands authentication just to start the tunnel.
Converting a Repository from CVS to Subversion
Perhaps the most important way to familiarize CVS users with Subversion is to let them continue to
work on their projects using the new system. And while that can be somewhat accomplished using a flat
import into a Subversion repository of an exported CVS repository, the more thorough solution involves
transferring not just the latest snapshot of their data, but all the history behind it as well, from one system to another. This is an extremely difficult problem to solve that involves deducing changesets in the
absence of atomicity, and translating between the systems' completely orthogonal branching policies,
among other complications. Still, there are a handful of tools claiming to at least partially support the
ability to convert existing CVS repositories into Subversion ones.
296
Subversion for CVS Users
One such tool is cvs2svn (http://cvs2svn.tigris.org/), a Python script originally created by members of
Subversion's own development community. Others include Lev Serebryakov's RefineCVS (http://lev.serebryakov.spb.ru/refinecvs/). These tools have various levels of completeness, and may make
entirely different decisions about how to handle your CVS repository history. Whichever tool you decide to use, be sure to perform as much verification as you can stand on the conversion results—after all,
you've worked hard to build that history!
For an updated collection of links to known converter tools, visit the Links page of the Subversion website (http://subversion.tigris.org/project_links.html).
297
Appendix B. WebDAV and
Autoversioning
WebDAV is an extension to HTTP, and is growing more and more popular as a standard for filesharing. Today's operating systems are becoming extremely Web-aware, and many now have built-in
support for mounting “shares” exported by WebDAV servers.
If you use Apache/mod_dav_svn as your Subversion network server, then to some extent, you are also
running a WebDAV server. This appendix gives some background on the nature of this protocol, how
Subversion uses it, and how well Subversion interoperates with other software that is WebDAV-aware.
Basic WebDAV Concepts
This section provides a very brief, very general overview to the ideas behind WebDAV. It should lay the
foundation for understanding WebDAV compatibility issues between clients and servers.
Original WebDAV
RFC 2518 defines a set of concepts and accompanying extension methods to HTTP 1.1 that make the
web into a more universal read/write medium. The basic idea is that a WebDAV-compliant web server
can act like a generic file server; clients can mount shared folders that behave much like NFS or SMB
filesystems.
The tragedy, though, is that the RFC 2518 WebDAV specification does not provide any sort of model
for version control, despite the “V” in DAV. Basic WebDAV clients and servers assume only one version of each file or directory exists, and can be repeatedly overwritten.
Here are the concepts and terms introduced in basic WebDAV:
Resources
WebDAV lingo refers to any server-side object (that can be described with a URI) as a resource.
New write methods
Beyond the standard HTTP PUT method (which creates or overwrites a web resource), WebDAV
defines new COPY and MOVE methods for duplicating or rearranging resources.
Collections
A collection is the WebDAV term for a grouping of resources. In most cases, it is analogous to a
directory. Whereas file resources can be written or created with a PUT method, collection resources
are created with the new MKCOL method.
Properties
This is the same idea present in Subversion—metadata attached to files and collections. A client can
list or retrieve properties attached to a resource with the new PROPFIND method, and can change
them with the PROPPATCH method. Some properties are wholly created and controlled by users
(e.g. a property called “color”), and others are wholly created and controlled by the WebDAV server (e.g. a property that contains the last modification time of a file). The former kind are called dead
properties, and the latter kind are called live properties.
Locking
A WebDAV server may decide to offer a locking feature to clients—this part of the specification is
optional, although most WebDAV servers do offer the feature. If present, then clients can use the
new LOCK and UNLOCK methods to mediate access to a resource. In most cases these methods are
298
WebDAV and Autoversioning
used to create exclusive write locks (as discussed in the section called “The Lock-Modify-Unlock
Solution”), although shared write locks are also possible in some server implementations.
Access control
A more recent specification (RFC 3744) defines a system for defining access control lists (ACLs)
on WebDAV resources. Some clients and servers have begun to implement this feature.
DeltaV Extensions
Because RFC 2518 left out versioning concepts, another committee was left with the responsibility of
writing RFC 3253, which adds versioning to WebDAV, a.k.a. “DeltaV”. WebDAV/DeltaV clients and
servers are often called just “DeltaV” programs, since DeltaV implies the existence of basic WebDAV.
DeltaV introduces a whole slew of new acronyms, but don't be intimidated. The ideas are fairly straightforward:
Per-resource versioning
Like CVS and other version-control systems, DeltaV assumes that each resource has a potentially
infinite number of states. A client begins by placing a resource under version control using the new
VERSION-CONTROL method.
Server-side working-copy model
Some DeltaV servers support the ability to create a virtual workspace on the server, where all of
your work is performed. Clients use the MKWORKSPACE method to create a private area, then indicate they want to change specific resources by “checking them out” into the workspace, editing them,
and “checking them in” again. In HTTP terms, the sequence of methods would be CHECKOUT,
PUT, CHECKIN.
Client-side working-copy model
Some DeltaV servers also support the idea that the client may have a private working copy on local
disk. When the client wants to commit changes to the server, it begins by creating a temporary server transaction (called an activity) with the MKACTIVITY method. The client then performs a
CHECKOUT on each resource it wishes to change and sends PUT requests. Finally, the client performs a CHECKIN resource, or sends a MERGE request to check in all resources at once.
Configurations
DeltaV allows you define flexible collections of resources called “configurations”, which don't necessarily correspond to particular directories. A configuration can be made to point to specific versions of files, and then a “baseline” snapshot can be made, much like a tag.
Extensibility
DeltaV defines a new method, REPORT, which allows the client and server to perform customized
data exchanges. While DeltaV defines a number of standardized history reports that a client can request, the server is also free to define custom reports. The client sends a REPORT request with a
properly-labeled XML body full of custom data; assuming the server understands the specific report-type, it responds with an equally custom XML body. This technique is very similar to XMLRPC.
Subversion and DeltaV
The original WebDAV standard has been widely successful. Every modern computer operating system
has a general WebDAV client built-in (details to follow), and a number of popular standalone applications are also able to speak WebDAV — Microsoft Office, Dreamweaver, and Photoshop to name a few.
On the server end, the Apache webserver has been able to provide WebDAV services since 1998 and is
considered the de-facto open-source standard. There are several other commercial WebDAV servers
299
WebDAV and Autoversioning
available, including Microsoft's own IIS.
DeltaV, unfortunately, has not been so successful. It's very difficult to find any DeltaV clients or servers.
The few that do exist are relatively unknown commercial products, and thus it's very difficult to test interoperability. It's not entirely clear as to why DeltaV has remained stagnant. Some argue that the specification is just too complex, others argue that while WebDAV's features have mass appeal (even the
least technical users appreciate network file-sharing), version control features aren't interesting or necessary for most users. Finally, some have argued that DeltaV remains unpopular because there's still no
open-source server product which implements it.
When Subversion was still in its design phase, it seemed like a great idea to use Apache httpd as the
main network server. It already had a module to provide WebDAV services. DeltaV was a relatively
new specification. The hope was that the Subversion server module (mod_dav_svn) would eventually
evolve into an open-source DeltaV reference implementation. Unfortunately, DeltaV has a very specific
versioning model that doesn't quite line up with Subversion's model. Some concepts were mappable,
others were not.
The upshot is that
1. The Subversion client is not a fully-implemented DeltaV client.
The client needs certain things from the server that DeltaV cannot provide, and thus is largely dependent on a number of Subversion-specific REPORT requests that only mod_dav_svn understands.
2. mod_dav_svn is not a fully-implemented DeltaV server.
Many portions of the DeltaV specification were irrelevant to Subversion, and thus left unimplemented.
There is still some debate in the developer community as to whether or not it's worthwhile to remedy
either of these situations. It's fairly unrealistic to change Subversion's design to match DeltaV, so there's
probably no way the client can ever learn to get everything it needs from a general DeltaV server. On the
other hand, mod_dav_svn could be further developed to implement all of DeltaV, but it's hard to find
motivation to do so—there are almost no DeltaV clients to interoperate with.
Autoversioning
While the Subversion client is not a full DeltaV client, nor the Subversion server a full DeltaV server,
there's still a glimmer of WebDAV interoperability to be happy about: it's called autoversioning.
Autoversioning is an optional feature defined in the DeltaV standard. A typical DeltaV server will reject
an ignorant WebDAV client attempting to do a PUT to a file that's under version control. To change a
version-controlled file, the server expects a series proper versioning requests: something like
MKACTIVITY, CHECKOUT, PUT, CHECKIN. But if the DeltaV server supports autoversioning, then
write-requests from basic WebDAV clients are accepted. The server behaves as if the client had issued
the proper series of versioning requests, performing a commit under the hood. In other words, it allows a
DeltaV server to interoperate with ordinary WebDAV clients that don't understand versioning.
Because so many operating systems already have integrated WebDAV clients, the use case for this feature borders on fantastical: imagine an office of ordinary users running Microsoft Windows or Mac OS.
Each user “mounts” the Subversion repository, which appears to be an ordinary network folder. They
use the shared folder as they always do: open files, edit them, save them. Meanwhile, the server is automatically versioning everything. Any administrator (or knowledgeable user) can still use a Subversion
client to search history and retrieve older versions of data.
This scenario isn't fiction: it's real and it works, as of Subversion 1.2 and later. To activate autoversion300
WebDAV and Autoversioning
ing in mod_dav_svn, use the SVNAutoversioning directive within the httpd.conf Location
block, like so:
<Location /repos>
DAV svn
SVNPath /path/to/repository
SVNAutoversioning on
</Location>
When SVNAutoversioning is active, write requests from WebDAV clients result in automatic commits.
A generic log message is auto-generated and attached to each revision.
Before activating this feature, however, understand what you're getting into. WebDAV clients tend to do
many write requests, resulting in a huge number of automatically committed revisions. For example,
when saving data, many clients will do a PUT of a 0-byte file (as a way of reserving a name) followed
by another PUT with the real filedata. The single file-write results in two separate commits. Also consider that many applications auto-save every few minutes, resulting in even more commits.
If you have a post-commit hook program that sends email, you may want to disable email generation
either altogether, or on certain sections of the repository; it depends on whether you think the influx of
emails will still prove to be valuable notifications or not. Also, a smart post-commit hook program can
distinguish between a transaction created via autoversioning and one created through a normal svn commit. The trick is to look for a revision property named svn:autoversioned. If present, the commit
was made by a generic WebDAV client.
Another feature that may be a useful complement for SVNAutoversioning comes from Apache's
mod_mime module. If a generic WebDAV client adds a new file to the repository, there's no opportunity for the user to set the the svn:mime-type property. This might cause the file to appear as
“generic” icon when viewed within a WebDAV shared folder, not having an association with any application. One remedy is to have a sysadmin (or other Subversion-knowledgable person) check out a
working copy and manually set the svn:mime-type property on necessary files. But there's potentially no end to such cleanup tasks. Instead, you can use the ModMimeUsePathInfo directive in your
Subversion <Location> block:
<Location /repos>
DAV svn
SVNPath /path/to/repository
SVNAutoversioning on
ModMimeUsePathInfo on
</Location>
This directive allows mod_mime to attempt automatic deduction of the mime-type on new files that
enter the repository via autoversioning. The module looks at the file's named extension and possibly the
contents as well; if the file matches some common patterns, then the the file's svn;mime-type property will be set automatically.
Client Interoperability
All WebDAV clients fall into one of three categories—standalone applications, file-explorer extensions,
or filesystem implementations. These categories broadly define the types of WebDAV functionality
available to users. Table B.1, “Common WebDAV Clients” gives our categorization and a quick description of some common pieces of WebDAV-enabled software. More details about these software offerings, as well as their general category, can be found in the sections that follow.
301
WebDAV and Autoversioning
Table B.1. Common WebDAV Clients
Software
Category
Adobe Photoshop
Standalone WebDAV applica- Image editing software, allowing
tions
direct opening from, and writing
to, WebDAV URLs
Description
Cadaver
Standalone WebDAV applica- Command-line WebDAV client
tions
supporting file transfer, tree, and
locking operations
DAV Explorer
Standalone WebDAV applica- GUI tool for exploring WebDAV
tions
shares
davfs2
WebDAV filesystem implement- Linux file system driver that alation
lows you to mount a WebDAV
share
GNOME Nautilus
File-explorer WebDAV exten- GUI file explorer able to perform
sions
tree operations on a WebDAV
share
KDE Konqueror
File-explorer WebDAV exten- GUI file explorer able to perform
sions
tree operations on a WebDAV
share
Mac OS X
WebDAV filesystem implement- Operating system with built-in
ation
support for mounting WebDAV
shares locally
Macromedia Dreamweaver
Standalone WebDAV applica- Web production software able to
tions
directly read from and write to
WebDAV URLs
Microsoft Office
Standalone WebDAV applica- Office productivity suite with
tions
several components able to directly read from and write to
WebDAV URLs
Microsoft Web Folders
File-explorer WebDAV exten- GUI file explorer program able to
sions
perform tree operations on a
WebDAV share
Novell NetDrive
WebDAV filesystem implement- Drive-mapping program for asation
signing Windows drive letters to
a mounted remote WebDAV
share
SRT WebDrive
WebDAV filesystem implement- File transfer software which,
ation
among other things, allows the
assignment of Windows drive letters to a mounted remote WebDAV share
Standalone WebDAV applications
A WebDAV application is a program which contains built-in functionality for speaking WebDAV protocols with a WebDAV server. We'll cover some of the most popular programs with this kind of WebDAV support.
Microsoft Office, Dreamweaver, Photoshop
302
WebDAV and Autoversioning
On Windows, there are several well-known applications that contain integrated WebDAV client functionality, such as Microsoft's Office, 1 Adobe's Photoshop, and Macromedia's Dreamweaver programs.
They're able to directly open and save to URLs, and tend to make heavy use of WebDAV locks when
editing a file.
Note that while many of these programs also exist for the Mac OS X, they do not appear to support
WebDAV directly on that platform. In fact, on Mac OS X, the File->Open dialog box doesn't allow one
to type a path or URL at all. It's likely that the WebDAV features were deliberately left out of Macintosh
versions of these programs, since OS X already provides such excellent low-level filesystem support for
WebDAV.
Cadaver, DAV Explorer
Cadaver is a bare-bones Unix commandline program for browsing and changing WebDAV shares. Like
the Subversion client, it uses the neon HTTP library—not surprisingly, both neon and cadaver are written by the same author. Cadaver is free software (GPL license) and is available at http://www.webdav.org/cadaver/.
Using cadaver is similar to using a commandline FTP program, and thus it's extremely useful for basic
WebDAV debugging. It can be used to upload or download files in a pinch, and also to examine properties, copy, move, lock or unlock files:
$ cadaver http://host/repos
dav:/repos/> ls
Listing collection `/repos/': succeeded.
Coll: > foobar
> playwright.el
> proofbypoem.txt
> westcoast.jpg
0
2864
1461
66737
May 10 16:19
May 4 16:18
May 5 15:09
May 5 15:09
dav:/repos/> put README
Uploading README to `/repos/README':
Progress: [=============================>] 100.0% of 357 bytes succeeded.
dav:/repos/> get proofbypoem.txt
Downloading `/repos/proofbypoem.txt' to proofbypoem.txt:
Progress: [=============================>] 100.0% of 1461 bytes succeeded.
DAV Explorer is another standalone WebDAV client, written in Java. It's under a free Apache-like license and is available at http://www.ics.uci.edu/~webdav/. DAV Explorer does everything cadaver does,
but has the advantages of being portable and being more user-friendly GUI application. It's also one of
the first clients to support the new WebDAV Access Control Protocol (RFC 3744).
Of course, DAV Explorer's ACL support is useless in this case, since mod_dav_svn doesn't support it.
The fact that both Cadaver and DAV Explorer support some limited DeltaV commands isn't particularly
useful either, since they don't allow MKACTIVITY requests. But it's not relevant anyway; we're assuming all of these clients are operating against an autoversioning repository.
File-explorer WebDAV extensions
Some popular file explorer GUI programs support WebDAV extensions which allow a user to browse a
DAV share as if it was just another directory on the local computer, and allowing basic tree editing operations on the items in that share. For example, Windows Explorer is able to browse a WebDAV server
as a “network place”. Users can drag files to and from the desktop, or can rename, copy, or delete files
in the usual way. But because it's only a feature of the file-explorer, the DAV share isn't visible to ordin1
WebDAV support was removed from Microsoft Access for some reason, but exists in the rest of the Office suite.
303
WebDAV and Autoversioning
ary applications. All DAV interaction must happen through the explorer interface.
Microsoft Web Folders
Microsoft was one of the original backers of the WebDAV specification, and first started shipping a client in Windows 98, known as “Web Folders”. This client was also shipped in Windows NT4 and 2000.
The original Web Folders client was an extension to Explorer, the main GUI program used to browse
filesystems. It works well enough. In Windows 98, the feature might need to be explicitly installed if
Web Folders aren't already visible inside “My Computer”. In Windows 2000, simply add a new
“network place”, enter the URL, and the WebDAV share will pop up for browsing.
With the release of Windows XP, Microsoft started shipping a new implementation of Web Folders,
known as the “WebDAV mini-redirector”. The new implementation is a filesystem-level client, allowing
WebDAV shares to be mounted as drive letters. Unfortunately, this implementation is incredibly buggy.
The client usually tries to convert http URLs (http://host/repos) into UNC share notation
(\\host\repos); it also often tries to use Windows Domain authentication to respond to basic-auth
HTTP challenges, sending usernames as HOST\username. These interoperability problems are severe
and documented in numerous places around the web, to the frustration of many users. Even Greg Stein,
the original author of Apache's WebDAV module, recommends against trying to use XP Web Folders
against an Apache server.
It turns out that the original “Explorer-only” Web Folders implementation isn't dead in XP, it's just buried. It's still possible to find it by using this technique:
1. Go to 'Network Places'.
2. Add a new network place.
3. When prompted, enter the URL of the repository, but include a port number in the URL. For example, http://host/repos would be entered as http://host:80/repos instead.
4. Respond to any authentication prompts.
There are a number of other rumored workarounds to the problems, but none of them seem to work on
all versions and patchlevels of Windows XP. In our tests, only the previous algorithm seems to work
consistently on every system. The general consensus of the WebDAV community is that you should
avoid the new Web Folders implementation and use the old one instead, and that if you need real a real
filesystem-level client for Windows XP, then use a third-party program like WebDrive or NetDrive.
A final tip: if you're attempting to use XP Web Folders, make sure you have the absolute latest version
from Microsoft. For example, Microsoft released a bug-fixed version in January 2005, available at http://support.microsoft.com/?kbid=892211. In particular, this release is known to fix a bug whereby
browsing a DAV share shows an unexpected infinite recursion.
Nautilus, Konqueror
Nautilus is the official file manager/browser for the GNOME desktop (http://www.gnome.org), and
Konqueror is the manager/browser for KDE desktop (http://www.kde.org). Both of these applications
have an explorer-level WebDAV client built-in, and operate just fine against an autoversioning repository.
In GNOME's Nautilus, from the File menu, select Open location and enter the URL. The repository
should then be displayed like any other filesystem.
In KDE's Konqueror, you need to use the webdav:// scheme when entering the URL in the location
304
WebDAV and Autoversioning
bar. If you enter an http:// URL, Konqueror will behave like an ordinary web browser. You'll likely
see the generic HTML directory listing produced by mod_dav_svn. By entering webdav://host/repos instead of http://host/repos, Konqueror becomes a WebDAV client and
displays the repository as a filesystem.
WebDAV filesystem implementation
The WebDAV filesystem implementation is arguably the best sort of WebDAV client. It's implemented
as a low-level filesystem module, typically within the operating system's kernel. This means that the
DAV share is mounted like any other network filesystem, similar to mounting an NFS share on Unix, or
attaching an SMB share as drive-letter in Windows. As a result, this sort of client provides completely
transparent read/write WebDAV access to all programs. Applications aren't even aware that WebDAV
requests are happening.
WebDrive, NetDrive
Both WebDrive and NetDrive are excellent commercial products which allows a WebDAV share to be
attached as drive letters in Windows. We've had nothing but success with these products. At the time of
writing, WebDrive can be purchased from South River Technologies (http://www.southrivertech.com).
NetDrive ships with Netware, is free of charge, and can be found by searching the web for
“netdrive.exe”. Though it is freely available online, users are required to have a Netware license. (If any
of that sounds odd to you, you're not alone. See this page on Novell's website: http://www.novell.com/coolsolutions/qna/999.html)
Mac OS X
Apple's OS X operating system has an integrated filesystem-level WebDAV client. From the Finder, select the Connect to Server item from the Go menu. Enter a WebDAV URL, and it appears as a disk on
the desktop, just like any other mounted volume.2.
Note that if your mod_dav_svn is older than version 1.2, OS X will refuse to mount the share as readwrite; it will appear as read-only. This is because the OS X insists on locking support for read-write
shares, and the ability to lock files first appeared in Subversion 1.2.
One more word of warning: OS X's WebDAV client can sometimes be overly sensitive to HTTP redirects. If OS X is unable to mount the repository at all, you may need to enable the BrowserMatch directive in the Apache server's httpd.conf:
BrowserMatch "^WebDAVFS/1.[012]" redirect-carefully
Linux davfs2
Linux davfs2 is a filesystem module for the Linux kernel, whose development is located at http://dav.sourceforge.net/. Once installed, a WebDAV network share can be mounted with the usual
Linux mount command:
$ mount.davfs http://host/repos /mnt/dav
2
From the Darwin terminal, one can also run mount -t webdav URL /mountpoint
305
Appendix C. Third Party Tools
Subversion's modular design (covered in the section called “Layered Library Design”) and the availability of language bindings (as described in the section called “Using Languages Other than C and C++”)
make it a likely candidate for use as an extension or backend to other pieces of software. For a listing of
many third-party tools that are using Subversion functionality under-the-hood, check out the Links page
on the Subversion website (http://subversion.tigris.org/project_links.html).
306
Appendix D. Copyright
Copyright (c) 2002-2006
Ben Collins-Sussman, Brian W. Fitzpatrick, C. Michael Pilato.
This work is licensed under the Creative Commons Attribution License.
To view a copy of this license, visit
http://creativecommons.org/licenses/by/2.0/ or send a letter to
Creative Commons, 559 Nathan Abbott Way, Stanford, California 94305,
USA.
A summary of the license is given below, followed by the full legal
text.
-------------------------------------------------------------------You are free:
* to copy, distribute, display, and perform the work
* to make derivative works
* to make commercial use of the work
Under the following conditions:
Attribution. You must give the original author credit.
* For any reuse or distribution, you must make clear to others the
license terms of this work.
* Any of these conditions can be waived if you get permission from
the author.
Your fair use and other rights are in no way affected by the above.
The above is a summary of the full license below.
====================================================================
Creative Commons Legal Code
Attribution 2.0
CREATIVE COMMONS CORPORATION IS NOT A LAW FIRM AND DOES NOT PROVIDE
LEGAL SERVICES. DISTRIBUTION OF THIS LICENSE DOES NOT CREATE AN
ATTORNEY-CLIENT RELATIONSHIP. CREATIVE COMMONS PROVIDES THIS
INFORMATION ON AN "AS-IS" BASIS. CREATIVE COMMONS MAKES NO WARRANTIES
REGARDING THE INFORMATION PROVIDED, AND DISCLAIMS LIABILITY FOR
DAMAGES RESULTING FROM ITS USE.
License
THE WORK (AS DEFINED BELOW) IS PROVIDED UNDER THE TERMS OF THIS
CREATIVE COMMONS PUBLIC LICENSE ("CCPL" OR "LICENSE"). THE WORK IS
PROTECTED BY COPYRIGHT AND/OR OTHER APPLICABLE LAW. ANY USE OF THE
WORK OTHER THAN AS AUTHORIZED UNDER THIS LICENSE OR COPYRIGHT LAW IS
PROHIBITED.
BY EXERCISING ANY RIGHTS TO THE WORK PROVIDED HERE, YOU ACCEPT AND
AGREE TO BE BOUND BY THE TERMS OF THIS LICENSE. THE LICENSOR GRANTS
YOU THE RIGHTS CONTAINED HERE IN CONSIDERATION OF YOUR ACCEPTANCE OF
SUCH TERMS AND CONDITIONS.
307
Copyright
1. Definitions
a. "Collective Work" means a work, such as a periodical issue,
anthology or encyclopedia, in which the Work in its entirety in
unmodified form, along with a number of other contributions,
constituting separate and independent works in themselves, are
assembled into a collective whole. A work that constitutes a
Collective Work will not be considered a Derivative Work (as
defined below) for the purposes of this License.
b. "Derivative Work" means a work based upon the Work or upon the
Work and other pre-existing works, such as a translation,
musical arrangement, dramatization, fictionalization, motion
picture version, sound recording, art reproduction, abridgment,
condensation, or any other form in which the Work may be recast,
transformed, or adapted, except that a work that constitutes a
Collective Work will not be considered a Derivative Work for the
purpose of this License. For the avoidance of doubt, where the
Work is a musical composition or sound recording, the
synchronization of the Work in timed-relation with a moving
image ("synching") will be considered a Derivative Work for the
purpose of this License.
c. "Licensor" means the individual or entity that offers the Work
under the terms of this License.
d. "Original Author" means the individual or entity who created the Work.
e. "Work" means the copyrightable work of authorship offered under
the terms of this License.
f. "You" means an individual or entity exercising rights under this
License who has not previously violated the terms of this
License with respect to the Work, or who has received express
permission from the Licensor to exercise rights under this
License despite a previous violation.
2. Fair Use Rights. Nothing in this license is intended to reduce,
limit, or restrict any rights arising from fair use, first sale or
other limitations on the exclusive rights of the copyright owner
under copyright law or other applicable laws.
3. License Grant. Subject to the terms and conditions of this License,
Licensor hereby grants You a worldwide, royalty-free,
non-exclusive, perpetual (for the duration of the applicable
copyright) license to exercise the rights in the Work as stated
below:
a. to reproduce the Work, to incorporate the Work into one or more
Collective Works, and to reproduce the Work as incorporated in
the Collective Works;
b. to create and reproduce Derivative Works;
c. to distribute copies or phonorecords of, display publicly,
perform publicly, and perform publicly by means of a digital
audio transmission the Work including as incorporated in
Collective Works;
d. to distribute copies or phonorecords of, display publicly,
perform publicly, and perform publicly by means of a digital
audio transmission Derivative Works.
308
Copyright
e.
For the avoidance of doubt, where the work is a musical composition:
i. Performance Royalties Under Blanket Licenses. Licensor
waives the exclusive right to collect, whether
individually or via a performance rights society
(e.g. ASCAP, BMI, SESAC), royalties for the public
performance or public digital performance (e.g. webcast)
of the Work.
ii. Mechanical Rights and Statutory Royalties. Licensor waives
the exclusive right to collect, whether individually or
via a music rights agency or designated agent (e.g. Harry
Fox Agency), royalties for any phonorecord You create from
the Work ("cover version") and distribute, subject to the
compulsory license created by 17 USC Section 115 of the US
Copyright Act (or the equivalent in other jurisdictions).
f. Webcasting Rights and Statutory Royalties. For the avoidance of
doubt, where the Work is a sound recording, Licensor waives the
exclusive right to collect, whether individually or via a
performance-rights society (e.g. SoundExchange), royalties for
the public digital performance (e.g. webcast) of the Work,
subject to the compulsory license created by 17 USC Section 114
of the US Copyright Act (or the equivalent in other
jurisdictions).
The above rights may be exercised in all media and formats whether now
known or hereafter devised. The above rights include the right to make
such modifications as are technically necessary to exercise the rights
in other media and formats. All rights not expressly granted by
Licensor are hereby reserved.
4. Restrictions.The license granted in Section 3 above is expressly
made subject to and limited by the following restrictions:
a. You may distribute, publicly display, publicly perform, or
publicly digitally perform the Work only under the terms of this
License, and You must include a copy of, or the Uniform Resource
Identifier for, this License with every copy or phonorecord of
the Work You distribute, publicly display, publicly perform, or
publicly digitally perform. You may not offer or impose any
terms on the Work that alter or restrict the terms of this
License or the recipients' exercise of the rights granted
hereunder. You may not sublicense the Work. You must keep intact
all notices that refer to this License and to the disclaimer of
warranties. You may not distribute, publicly display, publicly
perform, or publicly digitally perform the Work with any
technological measures that control access or use of the Work in
a manner inconsistent with the terms of this License
Agreement. The above applies to the Work as incorporated in a
Collective Work, but this does not require the Collective Work
apart from the Work itself to be made subject to the terms of
this License. If You create a Collective Work, upon notice from
any Licensor You must, to the extent practicable, remove from
the Collective Work any reference to such Licensor or the
Original Author, as requested. If You create a Derivative Work,
upon notice from any Licensor You must, to the extent
practicable, remove from the Derivative Work any reference to
such Licensor or the Original Author, as requested.
b. If you distribute, publicly display, publicly perform, or
publicly digitally perform the Work or any Derivative Works or
309
Copyright
Collective Works, You must keep intact all copyright notices for
the Work and give the Original Author credit reasonable to the
medium or means You are utilizing by conveying the name (or
pseudonym if applicable) of the Original Author if supplied; the
title of the Work if supplied; to the extent reasonably
practicable, the Uniform Resource Identifier, if any, that
Licensor specifies to be associated with the Work, unless such
URI does not refer to the copyright notice or licensing
information for the Work; and in the case of a Derivative Work,
a credit identifying the use of the Work in the Derivative Work
(e.g., "French translation of the Work by Original Author," or
"Screenplay based on original Work by Original Author"). Such
credit may be implemented in any reasonable manner; provided,
however, that in the case of a Derivative Work or Collective
Work, at a minimum such credit will appear where any other
comparable authorship credit appears and in a manner at least as
prominent as such other comparable authorship credit.
5. Representations, Warranties and Disclaimer
UNLESS OTHERWISE MUTUALLY AGREED TO BY THE PARTIES IN WRITING,
LICENSOR OFFERS THE WORK AS-IS AND MAKES NO REPRESENTATIONS OR
WARRANTIES OF ANY KIND CONCERNING THE WORK, EXPRESS, IMPLIED,
STATUTORY OR OTHERWISE, INCLUDING, WITHOUT LIMITATION, WARRANTIES OF
TITLE, MERCHANTIBILITY, FITNESS FOR A PARTICULAR PURPOSE,
NONINFRINGEMENT, OR THE ABSENCE OF LATENT OR OTHER DEFECTS, ACCURACY,
OR THE PRESENCE OF ABSENCE OF ERRORS, WHETHER OR NOT
DISCOVERABLE. SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OF IMPLIED
WARRANTIES, SO SUCH EXCLUSION MAY NOT APPLY TO YOU.
6. Limitation on Liability. EXCEPT TO THE EXTENT REQUIRED BY
APPLICABLE LAW, IN NO EVENT WILL LICENSOR BE LIABLE TO YOU ON ANY
LEGAL THEORY FOR ANY SPECIAL, INCIDENTAL, CONSEQUENTIAL, PUNITIVE
OR EXEMPLARY DAMAGES ARISING OUT OF THIS LICENSE OR THE USE OF THE
WORK, EVEN IF LICENSOR HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES.
7. Termination
a. This License and the rights granted hereunder will terminate
automatically upon any breach by You of the terms of this
License. Individuals or entities who have received Derivative
Works or Collective Works from You under this License, however,
will not have their licenses terminated provided such
individuals or entities remain in full compliance with those
licenses. Sections 1, 2, 5, 6, 7, and 8 will survive any
termination of this License.
b. Subject to the above terms and conditions, the license granted
here is perpetual (for the duration of the applicable copyright
in the Work). Notwithstanding the above, Licensor reserves the
right to release the Work under different license terms or to
stop distributing the Work at any time; provided, however that
any such election will not serve to withdraw this License (or
any other license that has been, or is required to be, granted
under the terms of this License), and this License will continue
in full force and effect unless terminated as stated above.
8. Miscellaneous
a. Each time You distribute or publicly digitally perform the Work
or a Collective Work, the Licensor offers to the recipient a
license to the Work on the same terms and conditions as the
license granted to You under this License.
310
Copyright
b. Each time You distribute or publicly digitally perform a
Derivative Work, Licensor offers to the recipient a license to
the original Work on the same terms and conditions as the
license granted to You under this License.
c. If any provision of this License is invalid or unenforceable
under applicable law, it shall not affect the validity or
enforceability of the remainder of the terms of this License,
and without further action by the parties to this agreement,
such provision shall be reformed to the minimum extent necessary
to make such provision valid and enforceable.
d. No term or provision of this License shall be deemed waived and
no breach consented to unless such waiver or consent shall be in
writing and signed by the party to be charged with such waiver
or consent.
e. This License constitutes the entire agreement between the
parties with respect to the Work licensed here. There are no
understandings, agreements or representations with respect to
the Work not specified here. Licensor shall not be bound by any
additional provisions that may appear in any communication from
You. This License may not be modified without the mutual written
agreement of the Licensor and You.
Creative Commons is not a party to this License, and makes no warranty
whatsoever in connection with the Work. Creative Commons will not be
liable to You or any party on any legal theory for any damages
whatsoever, including without limitation any general, special,
incidental or consequential damages arising in connection to this
license. Notwithstanding the foregoing two (2) sentences, if Creative
Commons has expressly identified itself as the Licensor hereunder, it
shall have all rights and obligations of Licensor.
Except for the limited purpose of indicating to the public that the
Work is licensed under the CCPL, neither party will use the trademark
"Creative Commons" or any related trademark or logo of Creative
Commons without the prior written consent of Creative Commons. Any
permitted use will be in compliance with Creative Commons'
then-current trademark usage guidelines, as may be published on its
website or otherwise made available upon request from time to time.
Creative Commons may be contacted at http://creativecommons.org/.
====================================================================
311
Download PDF
Similar pages