PD057VU2 Version : 3 TECHNICAL SPECIFICATION MODEL NO

P-511-333(V:3)
PD057VU2
Version : 3
TECHNICAL SPECIFICATION
MODEL NO. : PD057VU2
The content of this information is subject to be changed without notice.
Please contact PVI or its agent for further information.
Customer’s Confirmation
Customer
Date
By
Confirmed By
Prepared By
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be
distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co.,
Ltd.
Page:1
P-511-333(V:3)
PD057VU2
TECHNICAL
SPECIFICATION
CONTENTS
NO.
ITEM
PAGE
-
Cover
1
-
Contents
2
1
Application
3
2
Features
3
3
Mechanical Specifications
3
4
Mechanical Drawing of TFT-LCD module
4
5
Input / Output Terminals
5
6
Absolute Maximum Ratings
8
7
Electrical Characteristics
8
8
Pixel Arrangement
10
9
Display Color and Gray Scale Reference
11
10
SPI Register Description and Timing Characteristics
12
11
Power On Sequence
21
12
21
13
Optical Characteristics
Handling Cautions
14
Reliability Test
25
15
Packing Diagram
26
-
Revision History
27
24
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be
distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co.,
Ltd.
Page:2
P-511-333(V:3)
PD057VU2
1.Application
This data sheet applies to a color TFT LCD module, PD057VU2.
PD057VU2 module applies to OA product, car TV (must use Analog to Digital driving board),
which requires high quality flat panel display. If you must use in severe reliability
environment, please don’t extend over PVI’s reliability test conditions.
2. Features
. QVGA (320*240 pixels) resolution
. Amorphous silicon TFT LCD panel with back-light unit
. Pixel in stripe configuration
. Thin and light weight
. Display Colors:262,144 colors
. TTL interface
3.Mechanical Specifications
Parameter
Screen Size
Display Format
Display Colors
Active Area
Pixel Pitch
Pixel Configuration
Outline Dimension
Weight
Back-light
Surface treatment
Display mode
Gray scale inversion direction
Specifications
5.7 (diagonal)
320×(R,G,B)×240
262,144
115.2 (H)×86.4 (V)
0.36(H)×0.36(V)
Stripe
143.4(W)×104.0(H)×12.7 (D) (typ.)
148±10
CCFL, 1 tube
Anti-glare (and wide view film)
Normally white
6 o`clock
Unit
inch
dot
mm
mm
mm
g
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be
distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co.,
Ltd.
Page:3
P-511-333(V:3)
PD057VU2
4.Mechanical Drawing of TFT-LCD Module
Outline Drawing : Front View (unit : mm)
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be
distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co.,
Ltd.
Page:4
P-511-333(V:3)
PD057VU2
5.Input / Output Terminals
CN1
FPC Down Connect , 30Pins , Pitch : 0.5 mm
Pin No
Symbol
I/O
Description
1
D13(G3)
I
Green Data
2
D12(G2)
I
Green Data
3
D11(G1)
I
Green Data
4
D10(G0)
I
Green Data(LSB)
5
VDD2
I
Analog power supply for source driver
6
V8
I
Gamma correction voltage 8
7
V7
I
Gamma correction voltage 7
8
V6
I
Gamma correction voltage 6
9
V5
I
Gamma correction voltage 5
10
V4
I
Gamma correction voltage 4
11
V3
I
Gamma correction voltage 3
12
V2
I
Gamma correction voltage 2
13
V1
I
Gamma correction voltage 1
14
VSS2
I
Analog ground for source driver
15
D07(R7)
I
Red Data(MSB)
16
D06(R6)
I
Red Data
17
D05(R5)
I
Red Data
18
D04(R4)
I
Red Data
19
D03(R3)
I
Red Data
20
D02(R2)
I
Red Data
21
D01(R1)
I
Red Data
22
D00(R0)
I
Red Data(LSB)
23
CLK
I
Clock signal. Latching data at the rising edge
24
HS
I
Horizontal sync input
Note 5-3
25
VS
I
Vertical sync input
Note 5-4
26
DEN
I
Input data enable control.(Normally pull low)
Note 5-5
27
VCC
I
Digital power supply for source driver IC
Note 5-6
28
VCOM
I
Voltage for common electrode
Note 5-7
29
VEE
I
Negative power for gate driver
Note 5-8
30
VCOM
I
Voltage for common electrode
Note 5-7
Remark
Note 5-1
Note 5-2
Note 5-1
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be
distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co.,
Ltd.
Page:5
P-511-333(V:3)
PD057VU2
CN2
FPC Down Connect , 30Pins , Pitch : 0.5 mm
Pin No
Symbol
I/O
Description
1
VSS1
I
Ground for gate driver
2
VDD1
I
Power supply for gate logic circuit
3
NC
-
NC
4
VEE
I
Negative power for gate driver
5
NC
-
NC
6
VGH
I
Positive power for gate driver
7
NC
-
NC
8
GND
I
Digital ground for source driver IC
9
RESETB
I
Hardware global reset, (low active)
10
VSET
I
Externally/Internally gamma voltage setup
11
U/D
I
Up/Down control for gate driver
12
L/R
I
Left/Right control for source driver
13
IF2
I
Select the input data format
14
IF1
I
(IF2:L,IF1:H Parallel RGB)
15
SPENA
I
Serial port data enable signal (normally pull high)
16
SPCK
I
Serial port clock. (Normally pull high)
17
SPDA
I/O
Serial port data input/output
18
POL
O
Polarity select for the line inversion control signal
19
D27(B7)
I
Blue Data(MSB)
20
D26(B6)
I
Blue Data
21
D25(B5)
I
Blue Data
22
D24(B4)
I
Blue Data
23
D23(B3)
I
Blue Data
24
D22(B2)
I
Blue Data
25
D21(B1)
I
Blue Data
26
D20(B0)
I
Blue Data(LSB)
27
D17(G7)
I
Green Data(MSB)
28
D16(G6)
I
Green Data
29
D15(G5)
I
Green Data
30
D14(G4)
I
Green Data
Remark
Note 5-9
Note 5-8
Note 5-10
Note 5-11
Note 5-12
Note 5-13
Note 5-14
Note 5-1
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be
distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co.,
Ltd.
Page:6
P-511-333(V:3)
PD057VU2
Note 5-1 : Digital data input. DX0 is LSB and DX7 is MSB.
If parallel RGB input mode is used, D0X, D1X, and D2X indicate R, G and B data in
turn.
If serial RGB or CCIR601/656 input mode is selected, only D07~D00 are used, and
others short to Vss.
Note 5-2 : VDD2 Typ. = +5V.
Note 5-3 : Horizontal sync input in digital RGB mode. Or HREF input in CCIR601 mode.
( Short to Vss if not used )
Note 5-4 : Vertical sync input in digital RGB mode. Or V123 input in CCIR601 mode.
( Short to Vss if not used )
Note 5-5 : The SYNC(HS+VS) Mode and DEN mode are supported. If DEN signal is fixed
low,SYNC Mode is used. Otherwise , DEN mode is used.
Note 5-6 : VCC Typ. = +3.3V.
Note 5-7 : VCOM Typ.=+6V.
Note 5-8 : VEE Typ. = -10V.
Note 5-9 : VDD1 Typ.=+3.3V.
Note 5-10 : VGH Typ. =+15V.
Note 5-11 :If.VSET=”H”,the gamma correction voltage generated externally.
VSET=”L”,the gamma correction voltage generated internally.
Note 5-12 : The definition of L/R , U/D
U/D(PIN 11)=Low L/R(PIN 12)=High
U/D(PIN 11)=High L/R(PIN 12)=Low
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be
distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co.,
Ltd.
Page:7
P-511-333(V:3)
PD057VU2
Note 5-13 : IF1,IF2 control the input data format.
IF2,IF1
Input data format
L,L (default)
Serial RGB
L,H
Parallel RGB
H,L
CCIR601
H,H
CCIR656
Note 5-14 : When POL=L, output voltage is negative polarity.
When POL=H, output voltage is positive polarity.
6. Absolute Maximum Ratings
Symbol
VCC
MIN.
-0.3
VSS1=VSS2=0 V,Ta = 25 ℃
MAX.
Unit Remark
+7.0
V
VDD2
-0.3
+7.0
V
VDD1
-0.3
+7.0
V
H Level VGH
-0.3
+32.0
V
L Level VEE
-22.0
+0.3
V
VGH-VEE
-0.3
+45.0
V
VIN
-0.3
VDD+0.3 V
Parameter
Supply voltage for source driver
Supply voltage for gate driver
Input signal voltage
7. Electrical Characteristics
7-1)Operating condition
Parameter
Supply voltage for source driver
Supply voltage for gate driver
Signal input voltage
Signal output voltage
Logic
Analog
Logic
H level
L level
H level
L level
H level
L level
Symbol
VCC
VDD2
VDD1
VGH
VEE
VIH
VIL
VoH
VoL
MIN.
+3.0
+3.0
0.7V
0
0.8V
0
Typ.
+3.3
+5.0
+3.3
+15
-10
-
VCOMAC
-
6
VSS1=VSS2=0 V,Ta = 25 ℃
MAX. Unit
Remark
+3.6
V
V
+3.6
V
V
V
VCC
V
0.3VCC V
VCC
V
0.2VCC V
-
VP-P
AC Component
of VCOM
VCOM
DC Component
of VCOM Note
7-1
Note 7-1 : PVI strongly suggests that the VCOMDC level shall be adjustable , and the adjustable
level range is 1.8V±1V , every module’s VCOMDC level shall be carefully adjusted to
show a best image performance.
VCOMDC
-
1.8
-
V
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be
distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co.,
Ltd.
Page:8
P-511-333(V:3)
PD057VU2
7-2) Recommended Driving Condition for Back Light
Parameter
Symbol
Min.
Typ.
Lamp Voltage
VL
639
710
Lamp Current
IL
4
5
Lamp Frequency
PL
35
Vs
Starting Voltage (25℃)
(Reference Value)
Vs
Starting Voltage (0℃)
(Reference Value)
Max.
781
8
-
1240
1380
Unit
Vrms
mA
KHz
Vrms
Ta=25℃
Remark
IL=5mA
Note 7-2
Note 7-3
Note 7-4
Vrms
Note 7-4
Note 7-2:In order to have proper operation of the B/L, no matter what kind of inverters, the
output lamp current must be between Min. and Max. values to avoid the abnormal
display image caused by B/L.
Note 7-3:The driving frequency of the lamp may interfere with the horizontal synch signal,
leaving interference stripes on the display. So please evaluate LCD panels
beforehand.
To avoid interference stripes, we recommend to separate as far as possible the
lamp frequency from the horizontal synchronous signal and its high harmonic
frequency.
The inverter which PVI uses is TAD347-1.
Note 7-4:The “Starting Voltage” means the minimum voltage of inverter to turn on the lamp.
And it should be applied to the lamp for more than 1 second to start up. Otherwise
the lamp may not be turned on.
7-3) Backlight driving
Connector type: JST BHR-03VS-1, PIN No 2 pins, pitch=3.5mm
Pin No
Symbol
Description
Remark
1
VHigh
Power supply for lamp (High voltage side)
Red
-
NC
This is electrically opened
-
3
VLow
Power supply for lamp (Low voltage side)
White
Note 7-5: Low voltage side of backlight inverter connects with ground of inverter circuits.
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be
distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co.,
Ltd.
Page:9
P-511-333(V:3)
PD057VU2
7-4) Power Consumption
Parameter
Supply current for gate driver (Hi
level)
Supply current for gate driver
(Logic)
Supply current for gate driver (Low
level)
Supply current for source driver
(Analog)
Supply current for source driver
(Logic)
LCD panel power consumption
Backlight power consumption
Symbol Conditions
TYP. MAX. Unit
IGH
VGH =+15V
IDD1
VDD1=+3.3V 0.0016 0.0017 mA
0.048
0.055
Remark
mA
IEE
VEE =-10V
0.05
0.06
mA
IDD2
VDD2=+5V
4.95
5.55
mA
ICC
VCC=+3.3V
2.3
2.5
mA
-
-
34
40
mW
Note 7-6
-
-
3550
3910
mW
Note 7-7
Note 7-6:The power consumption for back light is not included.
Note 7-7:Back light lamp power consumption is calculated by IL×VL.
8. Pixel Arrangement
The LCD module pixel arrangement is stripe configuration.
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be
distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co.,
Ltd.
Page:10
P-511-333(V:3)
PD057VU2
9. Display Color and Gray Scale Reference
Input Color Data
Color
Red
Green
Blue
R7 R6 R5 R4 R3 R2 R1 R0 G7 G6 G5 G4 G3 G2 G1 G0 B7 B6 B5 B4 B3 B2 B1 B0
Black
0 0 0 0 0 0 0 0 0
0
0
0
0
0
0
0 0 0 0 0 0 0 0 0
Red
1 1 1 1 1 1 1 1 0
0
0
0
0
0
0
0 0 0 0 0 0 0 0 0
Green
0 0 0 0 0 0 0 0 1
1
1
1
1
1
1
1 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0
0
0
0
0
0
0
0 1 1 1 1 1 1 1 1
0 0 0 0 0 0 0 0 1
1
1
1
1
1
1
1 1 1 1 1 1 1 1 1
Magenta 1 1 1 1 1 1 1 1 0
0
0
0
0
0
0
0 1 1 1 1 1 1 1 1
Yellow
1 1 1 1 1 1 1 1 1
1
1
1
1
1
1
1 0 0 0 0 0 0 0 0
White
1 1 1 1 1 1 1 1 1
1
1
1
1
1
1
1 1 1 1 1 1 1 1 1
Red
0 0 0 0 0 0 0 0 0
0
0
0
0
0
0
0 0 0 0 0 0 0 0 0
Red
0 0 0 0 0 0 0 1 0
0
0
0
0
0
0
0 0 0 0 0 0 0 0 0
Red
0 0 0 0 0 0 1 0 0
0
0
0
0
0
0
0 0 0 0 0 0 0 0 0
Basic Blue
Colors Cyan
Red
Darker
↓
↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓
Brighter
Red
1 1 1 1 1 1 0 1 0
0
0
0
0
0
0
0 0 0 0 0 0 0 0 0
Red
1 1 1 1 1 1 1 0 0
0
0
0
0
0
0
0 0 0 0 0 0 0 0 0
Red
1 1 1 1 1 1 1 1 0
0
0
0
0
0
0
0 0 0 0 0 0 0 0 0
Green
0 0 0 0 0 0 0 0 0
0
0
0
0
0
0
0 0 0 0 0 0 0 0 0
Green
0 0 0 0 0 0 0 0 0
0
0
0
0
0
0
1 0 0 0 0 0 0 0 0
Green
0 0 0 0 0 0 0 0 0
0
0
0
0
0
1
0 0 0 0 0 0 0 0 0
Darker
↓
↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓
Green
Brighter
Blue
Green
0 0 0 0 0 0 0 0 1
1
1
1
1
1
0
1 0 0 0 0 0 0 0 0
Green
0 0 0 0 0 0 0 0 1
1
1
1
1
1
1
0 0 0 0 0 0 0 0 0
Green
0 0 0 0 0 0 0 0 1
1
1
1
1
1
1
1 0 0 0 0 0 0 0 0
Blue
0 0 0 0 0 0 0 0 0
0
0
0
0
0
0
0 0 0 0 0 0 0 0 0
Blue
0 0 0 0 0 0 0 0 0
0
0
0
0
0
0
0 0 0 0 0 0 0 0 1
Blue
0 0 0 0 0 0 0 0 0
0
0
0
0
0
0
0 0 0 0 0 0 0 1 0
Darker
↓
↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓
Brighter
Blue
0 0 0 0 0 0 0 0 0
0
0
0
0
0
0
0 1 1 1 1 1 1 0 1
Blue
0 0 0 0 0 0 0 0 0
0
0
0
0
0
0
0 1 1 1 1 1 1 1 0
Blue
0 0 0 0 0 0 0 0 0
0
0
0
0
0
0
0 1 1 1 1 1 1 1 1
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be
distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co.,
Ltd.
Page:11
P-511-333(V:3)
PD057VU2
10. SPI Register Description and Timing Characteristics
10.1 Function Control Register
Register R0 :Address(A3~A0)→
→0000
Bit
D7
D6
D5
D4
D3
D2
D1
D0
reserve
STHD1 STHD0 STHP4 STHP3 STHP2 STHP1 STHP0
Name
d
Default
0
0
0
0
0
0
0
0
STHD [1:0] : adjust start pulse position by dot
STHD1
STHD0
STH position adjust by dot
1
1
-1
1
0
-2
0
0
0
0
1
+1
STHP [4:0] : adjust start pulse position by pixel
STHP4 STHP3 STHP2 STHP1 STHP0
1
1
1
1
1
1
1
1
1
0
1
1
1
0
1
1
1
1
0
0
1
1
0
1
1
1
1
0
1
0
1
1
0
0
1
1
1
0
0
0
1
0
1
1
1
1
0
1
1
0
1
0
1
0
1
1
0
1
0
0
1
0
0
1
1
1
0
0
1
0
1
0
0
0
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
1
0
0
0
1
0
0
0
0
1
1
0
0
1
0
0
0
0
1
0
1
0
0
1
1
0
0
0
1
1
1
0
1
0
0
0
0
1
0
0
1
0
1
0
1
0
0
1
0
1
1
0
1
1
0
0
0
1
1
0
1
0
1
1
1
0
0
1
1
1
1
STH position adjust by pixel
-1
-2
-3
-4
-5
-6
-7
-8
-9
-10
-11
-12
-13
-14
-15
-16
0
+1
+2
+3
+4
+5
+6
+7
+8
+9
+10
+11
+12
+13
+14
+15
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be
distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co.,
Ltd.
Page:12
P-511-333(V:3)
PD057VU2
Register R1 :Address(A3~A0)→
→0001
Bit
D7
D6
D5
D4
D3
D2
D1
D0
Name STVP3 STVP2 STVP1 STVP0 STVNT1 STVNT0 STVPAL1 STVPAL0
Default
0
0
0
0
0
0
0
1
STVP [3:0] : adjust first line position by line
STVP3 STVP2 STVP1 STVP0
STV position adjust by line
1
1
1
1
-1
1
1
1
0
-2
1
1
0
1
-3
1
1
0
0
-4
1
0
1
1
-5
1
0
1
0
-6
1
0
0
1
-7
1
0
0
0
-8
0
0
0
0
0
0
0
0
1
+1
0
0
1
0
+2
0
0
1
1
+3
0
1
0
0
+4
0
1
0
1
+5
0
1
1
0
+6
0
1
1
1
+7
STVNT[1:0]: When NTSC mode, the relationship of first line in Even field and Odd field.
00: First line in Even field = First line in Odd field.
01: First line in Even field = First line in Odd field +1.
10: No use.
11: First line in Even field = First line in Odd field –1.
STVPAL[1:0]: When PAL mode, the relationship of first line in Even field and Odd field.
(Only for CCIR601/656 mode)
00: First line in Even field = First line in Odd field.
01: First line in Even field = First line in Odd field +1.
10: No use.
11: First line in Even field = First line in Odd field –1.
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be
distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co.,
Ltd.
Page:13
P-511-333(V:3)
PD057VU2
Register R2 :Address(A3~A0)→
→0010
Bit
Name
Default
D7
D6
D5
D4
D3
D2
D1
reserved reserved reserved reserved HS_POL VS_POL NPC_IN
0
0
0
1
0
0
1
D0
NPC_SET
0
HS_POL: HS polarity setting.
HS_POL = “L”, negative polarity.
HS_POL = “H”, positive polarity.
VS_POL: VS polarity setting.
VS_POL = “L”, negative polarity.
VS_POL = “H”, positive polarity.
NPC_IN: Define the NTSC/PAL mode by SPI.
NPC_IN = “L”, PAL. (Only for CCIR601/656 mode)
NPC_IN = “H”, NTSC.
NPC_SET: Set the NTSC/PAL auto detection or define by NPC_IN.
NPC_SET = “L”, auto detection.
NPC_SET = “H”, define by SPI.
Register R3 :Address(A3~A0)→
→0011
Bit
D7
D6
D5
D4
D3
D2
D1
D0
Reserve Reserved
Name Reserved Reserved Reserved Reserved PWD_EN Reserved
d
Default
0
0
1
0
1
0
1
1
PWD_EN: Set DAC power saving function.
PWD_EN = “L”, disable. The DAC is always power on.
PWD_EN = “H”, enable.
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be
distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co.,
Ltd.
Page:14
P-511-333(V:3)
PD057VU2
10-2 SPI timing characteristic
Characteristics
SPCK period
SPCK high width
SPCK low width
Data setup time
Data hold time
SPENA to SPCK setup time
SPENA to SPDA hold time
SPENA high pulse width
SPDA output latency
SPI"read"timing
Symbol
TCK
TCKH
TCKL
TSU1
THD1
TCS
TCE
TCD
TCR
Min.
60
30
30
12
12
20
20
50
-
1
A3
Max.
-
Unit
ns
ns
ns
ns
ns
ns
ns
ns
TCK
Remark
TCR
TSU1 THD1
SPDA
Typ.
1/2
A2
A1
A0
D7
D6
D5
D4
D3
D2
D1
D0
TCKL
SPCK
TCKH
TCK
SPENA
TCD
TCS
TCE
SPI"write"timing
TSU1 THD1
0
SPDA
A3
A2
A1
A0
D7
D6
D5
D4
D3
D2
D1
D0
TCKL
SPCK
TCKH
TCK
SPENA
TCD
TCS
TCE
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be
distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co.,
Ltd.
Page:15
P-511-333(V:3)
PD057VU2
10-3 Timing characteristics of input signals
10-3.1 Serial 8 bits RGB interface
Characteristics
Symbol Min. Typ. Max. Unit Remark
CLK period
TOSC
52
ns Note10-3
Data setup time
TSU
12
ns
Data hold time
THD
12
ns
HS period
TH
1224
TOSC
HS pulse width
THS
5
90
TOSC
HS rising time
TCr
700
ns
HS falling time
TCf
300
ns
VS pulse width
TVS
1
3
5
TH
VS rising time
TVr
700
ns
VS falling time
TVf
1.5
us
HS falling to VS falling time for odd field
THVO
0
3
TOSC
VS falling to HS falling time for even field
THVE
0
3
TOSC
VS-DEN time
TVSE
TH
18
HS-DEN time
THE
108 204 264 TOSC
DEN pulse width
TEP
960
TOSC
VS period
262
TH
st
th
Note 10-3 : When SYNC mode is used, 1 data start from 204 CLK after HS fallings.
10-3.2 Parallel 24 bits RGB interface
Characteristics
Symbol Min. Typ. Max. Unit Remark
CLK period
TOSC
156
ns Note10-2
Data setup time
TSU
12
ns
Data hold time
THD
12
ns
HS period
TH
408
TOSC
HS pulse width
THS
5
30
TOSC
HS rising time
TCr
700
ns
HS falling time
TCf
300
ns
VS pulse width
TVS
1
3
5
TH
VS rising time
TVr
700
ns
VS falling time
TVf
1.5
us
HS falling to VS falling time for odd field
THVO
0
3
TOSC
VS falling to HS falling time for even field
THVE
0
3
TOSC
VS-DEN time
TVSE
-
18
-
TH
HS-DEN time
DEN pulse width
THE
TEP
36
-
68
320
88
-
TOSC
TOSC
-
262
-
TH
VS period
Note 10-2 : When SYNC mode is used, 1st data start from 68th CLK after HS fallings.
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be
distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co.,
Ltd.
Page:16
P-511-333(V:3)
PD057VU2
10-3.3 CCIR601/656 Interface
Characteristics
Symbol
CLK period
TOSC
Data setup time
TSU
Data hold time
THD
Min.
12
12
Typ.
37
-
Max.
-
Unit
ns
ns
ns
Remark
10-3.4Hardware reset timing
Characteristics
Symbol
RESETB low pulse width
TRSB
Min.
200
Typ.
-
Max.
-
Unit
ns
Remark
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be
distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co.,
Ltd.
Page:17
P-511-333(V:3)
PD057VU2
10-4 Timing controller timing chart
10-4.1Clock and Data waveform
Tosc
CCIR 601 ( HS_POL="L" in Register R2 )
CLK
T HD
T SU
D00~D07
Blanking data
Cb0
Y0
Cr0
Y1
Cb2
Y
Cb
Y
Cr
G
B
R
G
R、G、B
R、G、B
R、G、B
HS
Tosc
CCIR 656
CLK
T HD
TSU
D07~D00
Cb
Y
Cr
Tosc
Digital Serial RGB
CLK
THD
TSU
D07~D00
Blanking data
R
DEN
Tosc
Digital Parallel RGB
CLK
D07~D00
D17~D10
D27~D20
TSU
Blanking data
THD
R、G、B
R、G、B
DEN
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be
distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co.,
Ltd.
Page:18
P-511-333(V:3)
PD057VU2
10-4.2 HS,VS,DEN timing waveform
HS and VS timing relationship
O d d fie ld
THVO
HS
VS
E v e n fie ld
HS
TH V E
VS
HS and DEN timing relationship
HS
T HS
T HE
DEN
HS, VS and DEN timing relationship
HS
TVS
VS
T VSE
DEN
T EP
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be
distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co.,
Ltd.
Page:19
P-511-333(V:3)
PD057VU2
10-4.3 CCIR601 timing waveform (VS_POL=”H”, HS_POL=”L” in Register R2)
ITU-R BT.601 NTSC Input Timing
Data
524
Blanking
523
1
2
3
4
5
Data
6
22
23
285
286
HREF
V123
1st Field
Blanking
261
262
263
264
265
266
267
268
HREF
V123
2st Field
HREF
276 clock
1440 clock
CLK
Data
CB0
Y719
Y0
CR0
CB
718
Y1
Y718
CR
718
Y719
ITU-R BT.601 PAL Input Timing
Data
622
Blanking
623
624
625
1
2
3
Data
4
22
23
335
336
HREF
V123
1st Field
Blanking
309
310
311
312
313
314
315
316
HREF
V123
2st Field
HREF
288 clock
1440 clock
CLK
Data
Y719
CB0
Y0
CR0
Y1
CB
718
Y718
CR
718
Y719
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be
distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co.,
Ltd.
Page:20
P-511-333(V:3)
PD057VU2
11. Power On Sequence
The Power on sequence only effect by VCC,VSS,VDD,VEE and VGH, the others do not care.
(1) 10ms≦T1<T2
(2) 0ms<T3≦T4≦10ms
12. Optical Characteristics
12-1) Specification:
MIN.
TYP.
MAX.
55
60
-
Ta=25℃
Unit Remarks
deg
45
50
-
deg
35
40
-
deg
200
400
-
-
-
15
30
ms
-
25
ms
450
500
50
-
U
75
80
-
%
x
0.29
0.32
0.35
-
y
0.33
-
0.36 0.39
45000
-
-
Parameter
Symbol
θ
Horizontal
Viewing
Angle
Vertical
Contrast Ratio
θ(to 6
o’clock)
θ(to 12
o’clock)
CR
Condition
CR≧10
At optimized
viewing angle
Response time
Rise
Tr
Fall
Tf
θ=0°/φ=0
Brightness
Luminance Uniformity
White Chromaticity
Lamp Life
θ=0°
Note 12-1
Note 12-2
Note 12-3
cd/㎡ Note 12-4
hr
Note 12-5
At=5mA
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be
distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co.,
Ltd.
Page:21
P-511-333(V:3)
PD057VU2
Note 12-1: The definitions of viewing angles are as follow
θ
12 o’
clock
Lamp connector
3 o’
clock
6 o’
clock
9 o’
clock
φ
Note 12-2: The definition of contrast ratio CR =
Luminance at gray level 63
Luminance at gray level 0
Note 12-3: Definition of Response Time Tr and Tf:
W hite
Black
W hite
100%
90%
Brightness
10%
0%
Tr
Tf
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be
distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co.,
Ltd.
Page:22
P-511-333(V:3)
PD057VU2
Note 12-4: All optical measurements shall be performed after backlight being turned-on for 30
mins. The optical characteristics shall be measured in dark room (ambient illumination
on panel surface less than 1 Lux). The measuring configuration shows as following
figure.
Photometer (TOPCON
BM-5A or BM-7 fast)
500 mm +/- 50 mm
Field = 1°
TFT-LCD module
DC/AC Inverter
Optical characteristics measuring configuration
Note 12-5: The uniformity of LCD is defined as
U=
The Minimum Brightness of the 9 testing Points
The Maximum Brightness of the 9 testing Points
Luminance meter: BM-5A or BM-7 fast (TOPCON)
Measurement distance: 500 mm +/- 50 mm
Ambient illumination: < 1 Lux
Measuring direction: Perpendicular to the surface of module
The test pattern is white (Gray Level 63).
1/6
2/6
2/6
1/6
1/6
2/6
2/6
1/6
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be
distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co.,
Ltd.
Page:23
P-511-333(V:3)
PD057VU2
13. Handling Cautions
13-1) Mounting of module
a) Please power off the module when you connect the input/output connector.
b) Please connect the ground pattern of the inverter circuit surely. If the connection
is not perfect, some following problems may happen possibly.
1. The noise from the backlight unit will increase.
2. The output from inverter circuit will be unstable.
3. In some cases a part of module will heat.
c) Polarizer which is made of soft material and susceptible to flaw must be
handled carefully.
d) Protective film (Laminator) is applied on surface to protect it against scratches
and dirts. It is recommended to peel off the laminator before use and taking
care of static electricity.
13-2) Precautions in mounting
a) When metal part of the TFT-LCD module (shielding lid and rear case) is soiled,
wipe it with soft dry cloth.
b) Wipe off water drops or finger grease immediately. Long contact with water may
cause discoloration or spots.
c) TFT-LCD module uses glass which breaks or cracks easily if dropped or bumped on
hard surface. Please handle with care.
d) Since CMOS LSI is used in the module. So take care of static electricity and
earth yourself when handling.
13-3) Adjusting module
a) Adjusting volumes on the rear face of the module have been set optimally before
shipment.
b) Therefore, do not change any adjusted values. If adjusted values are changed, the
specifications described may not be satisfied.
13-4) Others
a) Do not expose the module to direct sunlight or intensive ultraviolet rays for many
hours.
b) Store the module at a room temperature place.
c) The voltage of beginning electric discharge may over the normal voltage because of
leakage current from approach conductor by to draw lump read lead line around.
d) If LCD panel breaks, it is possibly that the liquid crystal escapes from the panel.
Avoid putting it into eyes or mouth. When liquid crystal sticks on hands, clothes or feet.
Wash it out immediately with soap.
e) Observe all other precautionary requirements in handling general electronic
components.
f) Please adjust the voltage of common electrode as material of attachment by 1 module.
13-5) Polarizer mark
The polarizer mark is to describe the direction of wide view angle film how to match
up with the rubbing direction.
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be
distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co.,
Ltd.
Page:24
P-511-333(V:3)
PD057VU2
14. Reliability Test
No
Test Item
Test Condition
1 High Temperature Storage Test
Ta = +80℃, 240 hrs
2 Low Temperature Storage Test
Ta = -40℃, 240 hrs
3 High Temperature Operation Test
Ta = +70℃, 240 hrs
4 Low Temperature Operation Test
Ta = -30℃, 240 hrs
5
6
Remark
High Temperature & High Humidity Ta = +60℃, 90%RH, 240 hrs
Operation Test
(No Condensation)
Thermal Cycling Test
-20℃+70℃, 200 Cycles
(non-operating)
30min 30min
Frequency:10 ~ 57 HZ /Vibration Width :0.075mm
58-500 H/ / Gravity :9.8m/s
Sweep time: 11 minutes
Test period: 3 hrs for each direction of X, Y, Z
2
Gravity : 490m/s * 6ms
Direction: ±X, ±Y, ±Z
3 times for each direction
7
Vibration Test
(non-operating)
8
Shock Test
(non-operating)
9
Electrostatic Discharge Test
(non-operating)
Machine Mode = ±200V
C = 200pF , R = 0Ω
1 times discharge for each pad
Ta: ambient temperature
Note: The protective film must be removed before temperature test
[Criteria]
In the standard conditions, there is not display function NG issue occurred.
(Including:line defect, no image) All the cosmetic specification is judged before
the reliability stress.
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be
distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co.,
Ltd.
Page:25
P-511-333(V:3)
PD057VU2
15. Packing Diagram
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be
distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co.,
Ltd.
Page:26
P-511-333(V:3)
PD057VU2
Revision History
Rev.
1.0
2.0
Issued Date Revised
May. 11,2006 New
Oct. 11,2006 變更前:
Contents
變更後:
3.0
Page 25
Low Temperature Storage Test 的條件從-30℃-40℃
Low Temperature Operation Test 的條件從-20℃-30℃
Feb. 05, 2007 Page 3
刪除 Optimum Viewing Direction:6 o’clock 的敘述
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be
distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co.,
Ltd.
Page:27
Download PDF
Similar pages