Intelligent Temperature Controlled LED Strip IP20 - PowerLED

60
Intelligent Temperature Controlled LED Strip
BEAM
LEDS PER/M
8.5 WATTS/M
Key Features:
• Constant current design to ensure even colour
distribution over longer lengths
• Intelligent temperature control to prolong life
of strip
• High temperature limitation to ensure safety
•Available in 20M lengths
• 60 LEDs per mtr
• IP20 rating
• Multiple applications for commercial
and residential environments
INTELLIGENT TEMPERATURE CONTROLLED SPECIFICATION
Part Code C0-TC-28-2-60-F12-20-FP
D0-TC-28-2-60-F12-20-FP
F0-TC-28-2-60-F12-20-FP
Voltage 24VDC
24VDC
24VDC
Power Consumption
8.5W/M
8.5W/M
8.5W/M
LED Qty
60 per mtr
60 per mtr
60 per mtr
Cuttable
Every 100mm
Every 100mm
Every 100mm
Colour3000K
4000K
6000K
PCB Width
12mm
12mm
12mm
Luminous Flux
995lm/M
995lm/M
995lm/M
CRI80Ra
80Ra
80Ra
IP Rating
IP20
IP20
IP20
Working temperature -20°C ~ +60°C
Working Humidity
40% ~ 70% RH
-20°C ~ +60°C
40% ~ 70% RH
-20°C ~ +60°C
Dimensions
20,000 x 12mm
20,000 x 12mm
20,000 x 12mm
40% ~ 70% RH
Mechanical
Cutting
Point
Cutting
Point
100mm
+
+
+
-
-
-
20M
Working temperature <50°C, brightness 100%
Working temperature <60°C, brightness 80%
Working temperature <70°C, starting protection, brightness of zero
PowerLed (UK) Ltd
Orion House
Calleva Park
Aldermaston
Berkshire
RG7 8SN
Contact:
Tel: 0118 9703856
enquiries@powerled.uk.com
www.powerled.uk.com
12mm
IP20
30,000 HOURS
RATED
60
Intelligent Temperature Controlled LED Strip
8.5 WATTS/M
BEAM
LEDS PER/M
IP20
30,000 HOURS
POWERLED TRADEMARKS
Introduction
A large percentage of mass produced LED Flexible strip within the lighting industry commonly delivers unnecessary
additional heat of which is caused by over driving LEDs to achieve greater light output. For most manufacturers
meeting an impressive output at a very attractive price brings ultimate value for marketing and quicker gains for the
business. The higher end of the product quality spectrum now boasts newer technology including intelligent Temperature
compensation heat dissipation that directly applies to the area the LED is installed and the ambient temperature of the
product.
Excessive heat generated within the product will only lead to a detrimental effect on the lifetime of the LED itself and a
reduction in quality via the products performance. Now ask yourself the question, would you rather purchase a product
with higher output quality and a longer lifespan over a cheaper alternative?
Safety is paramount and should also be a key consideration when purchasing a premium product. Potential safety issues
are not something you want to have to worry about when purchasing. Potential overheating from the PCB for example
is an essential issue you want to avoid all together. With cabinetry, furniture and retail applications as key touch points
for consumer’s everyday lives, it is fundamental that products meet industry standard risk assessments and go above
and beyond to avoid potential tragedy.
Definitions
ITM Intelligent Temperature Monitoring®
Tag - ‘Monitors PCB temperature to ensure heat and current remain within safety parameters’
Smart Intelligent Temperature Monitoring (ITM) circuitry constantly monitors and brings a
counterbalance threshold to the PCB, this therefore ensures that the PCB temperature does not exceed
the pre-set temperature safety parameters. Smart monitoring also measures the PCB temperature
constantly and activates the ICC circuitry should in any event the PCB rise above 60°C.
ICC Intelligent Current Control®
Tag - ‘Smart Current adjustment to automatically control LED Current’
Intelligent Current Control (ICC)® delivers in conjunction with the ITM® circuitry to automatically
decrease the current to the LED and reduce the heat and light output. At PowerLed we pre-set the
maximum PCB temperature at 60°C and upon the internal IC detecting the temperature rising beyond
environmental conditions the ICC® circuitry will immediately reduce the current. Reducing the current
will then reduce heat output and the unit can then maintain a safe operating temperature.
Customised temperature parameters can be pre-set to 40°C / 50°C / 80°C to suit the application
(MOQ Required).
ATC Automatic Temperature Control®
Tag - ‘Temperature control constantly monitors PCB Temperature and automatically adjust the LED Current’
Automatic temperature control (ATC)® ensures the safe installation of LED Flexible strip in areas
where additional environmental temperatures may well see the unit heat build and therefore make
the dissipation of heat from the LED itself difficult. Temperature control is achieved by the addition of
bespoke integrated circuits that have been developed through the PowerLed product research and
development program. ATC should be specified in applications where excessive heat is likely to impact
the installation at any point during the unit’s lifetime.
Applications - Retail environments, furniture and wood surfaces enclosed spaces.
ACR Adaptive Current Rollback®
TAG - ‘Constant monitoring and adjustment of the LED Current ensures PCB does not exceed temperature safety
parameters.’
Adaptive Current Rollback® (ACR) circuits control the current for the unit in question and
deliver reduction to ensure the LED to work within pre-set safety temperature parameters.
ACR° will recover the current once the temperature reduces and meets the required
parameter. Added LED intelligence allows peace of mind for installers of public applications.
PowerLed (UK) Ltd
Orion House
Calleva Park
Aldermaston
Berkshire
RG7 8SN
Contact:
Tel: 0118 9703856
enquiries@powerled.uk.com
www.powerled.uk.com
RATED
Download PDF
Similar pages