PRIMERGY
BX920 S1
PRIMERGY BX920 S1
- All-around blade server packs lots of
computing power in a small form factor.
Fujitsu PRIMERGY BX blade servers are the ideal choice for data center
solutions today and tomorrow. Fujitsu blade servers provide maximum
performance and maximum redundancy.
PRIMERGY BX920 S1
Main Features
The PRIMERGY BX920 S1 blade server uses Intel
5500 processors, their newest and most powerful
member of the Xeon ® family. Utilizing QuickPath
architecture and dedicated on-chip memory controllers,
the Intel ® Xeon ® 5500 series processors easily exceed
the capacities of any prior generation. The BX920 S1
blade server can host two of these processors, up to
two hard drives, 72 GB of DDR3 memory, and two
integrated dual-channel Intel 82575 Gbit Ethernet
controllers. In addition, the BX920 S1 can host two
mezzanine daughter cards, offering a choice of
additional Gbit links, 10Gbit, Fibre Channel, or
Infiniband connectivity. The BX920 S1 is ideal for
virtualization using hypervisors such as VMware ®
ESXi, Microsoft Hyper-V™, or Citrix XenServer™,
and can provide a class-leading twelve physical
Gbit Ethernet connections per server blade.
®
Key Features
of this Server:
Powerful Intel ® Dual and
Quad-Core™ Xeon ® 5500
series processors
Memory high availability
with hot spare memory
or mirroring support
Up to 72 GB of DDR3-RAM
Minimum space
requirements
Low power consumption
Direct connections
to reduce cabling
Integrated Remote
Management Controller
(iRMC) providing advanced
management features
PRIMERGY BX920 S1 blades are equipped with our
state-of-the-art Integrated Remote Management
Controller (iRMC S2); and combined with their wide
range of processor, disk, and memory options,
provides IT managers the performance and scalability
they need for any data center application.
Performance: Two Intel® Xeon® 5500 series Dual,
Quad and Turbo Quad-Core processors with Turbo
Boost technology, demand-based switching, QuickPath
Interconnect (QPI) and on-chip memory management
unit. The Intel® QuickPath architecture provides the
BX920 S1 with up to 25 GB per second (GB/s)
bandwidth between processors, processors and
memory, and processors and I/O hub.
Benefits
Tunable performance in a consistent power and
thermal envelope.
Management: The Integrated Remote Management
Controller (iRMC S2) enables extensive individual server
access and control, even at remote locations. The
embedded Pre-Failure Detection and Analysis function
provides reliable operations in any circumstances.
Benefits
Easy and reliable management and control.
Virtualization: Multiple-server boot options, including
local disk, via the network, or USB solid state disk
makes this server ideal for any application. It is an
excellent platform for both virtualized and physical
deployments.
Benefits
Versatile operations.
Connectivity: Two integrated dual-channel Intel®
82575 Gbit Ethernet controllers are standard. Two
PCI Express 2.0 mezzanine slots hosting a combination of quad-Gbit Ethernet, dual 8Gbit fibre channel,
dual-channel 10Gbit Ethernet, and dual-channel DDR
or QDR Infiniband provide superb connectivity via a
state-of-the-art high-performance midplane.
Benefits
Excellent I/O connectivity.
PRIMERGY BX920 S1 specificatioNS
TECHNICAL DETAILS
Main Board
Main board Type
Chipset
Processor Quantity
and Type
Processor Options
Memory Slots
Memory Slot Type
Memory Capacity
(Min. - Max.)
Memory Protection
Memory Modules Independent Mode
Memory Modules Mirrored Mode (Two Identical Modules per Bank)
Memory Modules Spare-Performance Mode (Three Identical Modules per Bank)
Interfaces
USB Ports
Graphics (15-Pin)
Serial Connection
LAN / Ethernet (RJ-45)
Service LAN (RJ45)
D 2860
Intel® 5520
1 - 2 x Intel® Xeon® processor 5500 series
Intel® Xeon® E5502 (2C, 1.86 GHz, SLC: 2 x 256 KB , TLC: 4 MB , Turbo: No, 4.8 GT/s, Mem bus:
800 MHz, 80 W)
Intel® Xeon® E5504 (4C, 2.00 GHz, SLC: 4 x 256 KB , TLC: 4 MB , Turbo: No, 4.8 GT/s, Mem bus:
800 MHz, 80 W)
Intel® Xeon® E5506 (4C, 2.13 GHz, SLC: 4 x 256 KB , TLC: 4 MB , Turbo: No, 4.8 GT/s, Mem bus:
800 MHz, 80 W)
Intel® Xeon® E5520 (4C, 2.26 GHz, SLC: 4 x 256 KB , TLC: 8 MB , Turbo: Yes, 5.86 GT/s, Mem bus:
1066 MHz, 80 W)
Intel® Xeon® E5530 (4C, 2.40 GHz, SLC: 4 x 256 KB , TLC: 8 MB , Turbo: Yes, 5.86 GT/s, Mem bus:
1066 MHz, 80 W)
Intel® Xeon® E5540 (4C, 2.26 GHz, SLC: 4 x 256 KB , TLC: 8 MB , Turbo: Yes, 5.86 GT/s, Mem bus:
1066 MHz, 80 W)
Intel® Xeon® X5550 (4C, 2.66 GHz, SLC: 4 x 256 KB , TLC: 8 MB , Turbo: Yes, 6.4 GT/s, Mem bus:
1333 MHz, 95 W)
Intel® Xeon® X5560 (4C, 2.80 GHz, SLC: 4 x 256 KB , TLC: 8 MB , Turbo: Yes, 6.4 GT/s, Mem bus:
1333 MHz, 95 W)
Intel® Xeon® X5570 (4C, 2.93 GHz, SLC: 4 x 256 KB , TLC: 8 MB , Turbo: Yes, 6.4 GT/s, Mem bus:
1333 MHz, 95 W) Intel® Xeon® L5506 (4C, 2.13 GHz, SLC: 4 x 256 KB , TLC: 4 MB ,
Turbo: No, 4.8 GT/s, 60 W)
Intel® Xeon® L5520 (4C, 2.26 GHz, SLC: 4 x 256 KB , TLC: 8 MB , Turbo: Yes, 5.86 GT/s, 60 W)
9 (6 slots on CPU 1, 3 slots on CPU 2)
DIMM (DDR3)
2 GB - 72 GB
Advanced ECC memory scrubbing
SDDC (ChipKill™)
Memory mirroring support
1 GB (1 module(s) with 1 GB) DDR3, unbuffered, ECC, 1066 MHz, PC3-8500
2 GB (1 module(s) with 2 GB) DDR3, registered, ECC, 1066 MHz, PC3-8500
2 GB (1 module(s) with 2 GB) DDR3, registered, ECC, 1333 MHz, PC3-10600
2 GB (1 module(s) with 2 GB) DDR3, unbuffered, ECC, 1066 MHz, PC3-8500
4 GB (1 module(s) with 4 GB) DDR3, registered, ECC, 1066 MHz, PC3-8500
4 GB (1 module(s) with 4 GB) DDR3, registered, ECC, 1333 MHz, PC3-10600
8 GB (1 module(s) with 8 GB) DDR3, registered, ECC, 1066 MHz, PC3-8500
8 GB (1 module(s) with 8 GB) DDR3, registered, ECC, 1333 MHz, PC3-10600
4 GB (2 module(s) with 2 GB) DDR3, registered, ECC, 1066 MHz, PC3-8500
4 GB (2 module(s) with 2 GB) DDR3, registered, ECC, 1333 MHz, PC3-10600
8 GB (2 module(s) with 4 GB) DDR3, registered, ECC, 1066 MHz, PC3-8500
8 GB (2 module(s) with 4 GB) DDR3, registered, ECC, 1333 MHz, PC3-10600
16 GB (2 module(s) with 8 GB) DDR3, registered, ECC, 1066 MHz, PC3-8500
16 GB (2 module(s) with 8 GB) DDR3, registered, ECC, 1333 MHz, PC3-10600
6 GB (3 module(s) with 2 GB) DDR3, registered, ECC, 1066 MHz, PC3-8500
6 GB (3 module(s) with 2 GB) DDR3, registered, ECC, 1333 MHz, PC3-10600
12 GB (3 module(s) with 4 GB) DDR3, registered, ECC, 1066 MHz, PC3-8500
12 GB (3 module(s) with 4 GB) DDR3, registered, ECC, 1333 MHz, PC3-10600
24 GB (3 module(s) with 8 GB) DDR3, registered, ECC, 1066 MHz, PC3-8500
24 GB (3 module(s) with 8 GB) DDR3, registered, ECC, 1333 MHz, PC3-10600
4 x USB at the front via special cable
1 x VGA at the front via special cable
1 x RS232 (9-pin) at the front via special cable
4 x Gbit Ethernet via midplane at Ethernet connection blade
Service LAN traffic can be switched to shared onboard Gb LAN port
I/O Controller on Board
RAID Controller
Integrated SAS RAID 0/1 for HDD´s
LAN Controller
2 x Intel® 82575, 4 x 10/100/1000 Mb/s Ethernet,
Remote Management Integrated Remote Management Controller (iRMC S2, 32 MB attached memory incl.
Controller
graphics controller)
Trusted Platform
Module (TPM)
Infineon / 1.2 (option)
Slots
PCI-Express Gen2 x8
2 x Mezzanine Card
Drive Bays
Hard Disk Bays
2 x 2.5-inch hot-plug SAS
Operating Panel
Operating Buttons
On/off switch
ID button
Status LEDs
Power (amber / green)
System status (amber)
LAN connection (green)
Identification (blue)
CSS (yellow)
BIOS
BIOS Features
Local and remote update via ServerView Update Manager
Online update tools for main Windows and Linux versions
SMBIOS V2.6
Remote PXE boot support
Remote iSCSI boot support
Supported Operating Microsoft® Windows Server® 2008
Systems
Microsoft® Windows Server® 2003
Novell SUSE Linux Enterprise Server
Red Hat Enterprise Linux
VMware Infrastructure
Note: Support of other Linux derivatives on demand
Operating System
Release Link
http://solutions.us.fujitsu.com/www/content/support/osrel.xls
Server Management Standard
ServerView Suite: ServerView Installation Manager
ServerView Operation Manager
ServerView RAID
ServerView Update Manager
SV Agents: ASR&R
PDA
iRMC S2 Advanced Pack
Server Management Regarding operating system dependencies for ServerView Suite
Notes
software products see dedicated product data sheets.
Dimensions/Weight Dimension (W x D x H) 1.8 x 19.7 x 8.27 in.
Weight
12.68 lbs.
Weight Notes
Weight may vary depending on actual configuration
Floor-Stand (W x D x H)
Rack (W x D x H)
Environmental
Temperature Note
In accordance with the corresponding PRIMERGY BX900 system unit
Compliance
Germany
GS
Europe
CE
Global
CB
RoHS (restriction of hazardous substances)
WEEE (Waste Electrical and Electronic Equipment) Directive
Compliance Notes
In combination with the corresponding PRIMERGY BX system unit, there is
general compliance with the safety requirements of all European countries
and North America. National approvals required in order to satisfy statutory
regulations or for other reasons are available upon request.
Compliance Link
http://sp.ts.fujitsu.com/sites/certificates/default.aspx
Components
Hard Disk Drives
SAS, 3 Gb/s, 146 GB, 10000 rpm, hot plug, 2.5-inch
SAS, 3 Gb/s, 73 GB, 15000 rpm, hot plug, 2.5-inch
SAS, 3 Gb/s, 73 GB, 10000 rpm, hot plug, 2.5-inch
SAS, 3 Gb/s, 36 GB, 15000 rpm, hot plug, 2.5-inch
Hard Disk Notes
One GB equals one billion bytes, when referring to
hard disk drive capacity.
Mezzanine Cards
Fibre Channel Mezzanine card 2 x 8 Gb (MC-FC82E), PCIe x4
Ethernet Mezzanine card 4 x 1 Gb, PCIe x4
Warranty
Standard Warranty
3 years
Maintenance and Recommended Service 7x24, onsite response time: 4h
Support Services - Spare Parts Availability 5 years
the Perfect Service Weblink
http://www.fujitsu.com/us/support/index.html
Extension
Information about environmental care, policies, programs and our Environmental Guideline FSC 03230:
http://solutions.us.fujitsu.com/www/content/aboutus/environmental/environment.php
Take back and recycling information: http://solutions.us.fujitsu.com/www/content/products/trade-in_program/
ABOUT FUJITSU AMERICA
Fujitsu America, Inc. provides a complete portfolio of business technology services, computing platforms, and industry solutions.
Fujitsu platform products are based on scalable, reliable and high-performance server, storage, software, point-of-sale, and
mobile technologies. Fujitsu combines its renowned platform offerings with a full suite of onshore, near shore and offshore
system integration, outsourcing, and datacenter services covering applications, operations, infrastructure, customer service,
and multi-vendor lifecycle services. Fujitsu provides industry-specific solutions for retail, manufacturing, healthcare,
government, education, financial services, and telecommunications sectors. For more information on Fujitsu America’s
business scope, visit http://us.fujitsu.com/solutions.
Fujitsu America, Inc.
1250 East Arques Avenue
Sunnyvale, CA 94085-3470, U.S.A.
Telephone: 800 831 3183 or 408 746 6000
Fax: 408 764 5060
Web: us.fujitsu.com/solutions
Email: solutions@us.fujitsu.com
Fujitsu and the Fujitsu logo are registered
trademarks of Fujitsu Limited. PRIMERGY is
a registered trademark of Fujitsu Technology
Solutions. Intel and XEON are registered
trademarks or trademarks of Intel
Corporation or its subsidiaries in the
United States and other countries.
Microsoft, Windows, and Windows Server
are either registered trademarks or
trademarks of Microsoft Corporation in
the United States and/or other countries.
UNIX is a registered trademark of The
Open Group in the United States and other
Countries. All other trademarks and
product names are the property of their
respective owners. The information in
this document may be superseded by
subsequent documents. For details
regarding delivery of specific products,
features, and services, contact your local
Fujitsu representative.
©2009 Fujitsu America, Inc.
All rights reserved. FPC58-2512-01 9/09.
09.0610
Download PDF
Similar pages