Y12 iRest English instruction

BODY SHOW SHAPING
MACHINE
Walking Mode
Jogging Mode
Run Mode
SAVE THESE INSTRUCTIONS
Products refer to the actual product, without prior notice.
SL-Y12 Operation Instructions
Thanks for purchasing this product. Please read this manual instruction carefully in
order to know how to use this product correctly before operation. Please pay more
attention to some important safety warning and keep this manual book properly for
future use.
Note: Our Company reserves the right to revise the design and description of this
product without any further notice. Please refer to the actual color of this product.
CONTENTS
Safety And Maintenance
Name And Function
Function description
Operation guide
Control program
The method of usage
Maintenance
Setting password
Product Specification
01
Safety And Maintenance
Safety And Maintenance
1.IMPORTANT SAFETY WARNING
Do not allow any foreign matter to enter the clearance between the massage
head and the casing
Do not allow the product to come into contact with water so as to avoid any
possible accidents that may result from a short circuit.
If the mains cable or plug is damaged, do not disassemble and attempt to repair
it by yourself. Please contact your distributor.
Ensure that the mains power is suitable for this product.
Please disconnect the product from the mains supply after use or before cleaning
to avoid damage to the equipment or personal injury.
Please use this product according to this Manual.
Do not use any spare parts and attachments other than those recommended.
Do not use this product if its casing or mains cable is damaged.
Do not use this product if you are under the influence of alcohol or feeling unwell.
Do not use this product with too much force so as to avoid injury.
Do not keep this product on for more than 15 minutes so as to avoid overheating.
Do not use this product within one hour of eating.
Please use this product carefully according to your doctor's advice if you have a
neck or back injury or if you have had an operation recently.
Weighing more than 100kg are prohibited
4.SAFETY PRECAUTIONS
Do not plug or unplug this product when your hands are wet
Do not pull the cable when unplugging. Do not plug or unplug carelessly.
This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
Do not damage the cable or change the circuit of the product.
Please cease using this product in case of a power cut in order to avoid any body
injury upon sudden power resumption.
Please stop using this product and consult your local supplier if you notice
anything abnormal with the product during use.
Please stop using this product and consult your doctor for advice
If the supply cord is damaged, it must be replaced by the manufacturer, its service
agent or similarly qualified persons in order to avoid a hazard.
The appliance has a heated surface. Persons insensitive to heat must be careful
when using the appliance.
Forbidden to use when the cover broken.
Forbidden to press it with stronger force or by whole body, don't touch it with hard
objects, don't put it under heavy stress or tread on it.
Prevent water or other corrosive liquid inflow to the products and cause stoppage
and damage the machine.
Please don't touch the wire line or controller line with hand, it may be cause the
machine suspension and swing, lead to stop working because of the wire core
was broken.
Please don't change the structure of the machine or replace the spare parts.
Keep it away from fire or inflammable place, it is more prone to stoppage and
danger, cause distortion, discolored or damaged.
If any abnormal happens when using, please stop it and cut off the power.
People who mentally unbalanced or paralyzed should be carefully to use and
under the watchful eye of others or consult to the doctors before use.
2.WORKING ENVIRONMENT
Do not use this product in a highly humid environment such as a bathroom.
Do not use this product immediately after there has been a sharp change in the
environmental temperature.
Do not use this product in an environment where there are lots of dust or
corrosive gases.
Do not use this product when it is covered by a blanket or pillow, etc.
3.PEOPLE THAT SHOULD NOT USE THIS PRODUCT
People with contagious skin conditions
Patients with osteoporosis
Patients with heart diseases and with electronic medical instruments like a heart
pacemaker
People in a high fever
Women that are pregnant or menstruating
Those who are injured or suffering from any body surface disease
The appliance has a heated surface. Persons insensitive to heat must be careful
when using the appliance.
Children under 14-year old or people mentally unbalanced without being
Supervised are not allowed to use this machine.
Those who to need rest according to a doctor's advice or those who do not feel
well
Do not use this product when you are wet
Do not use this product on a pet.
02
03
Function description
Name And Function
Introduction of MainBody
1
2
8
3
4
5
Introduction of remote controller
6
7
Adopting balance type vibration mode to achieve fitness effect, for 5 minutes
exercise is equivalent to 1 km running.
Unique (patent)arc pedal design, make the exercise effect better.
Set with simulation measurement of calories and exercise mileage.
The movement pedal set with run, jogging, walking motion region, to meet the
different amounts of movement.
Time is 5-30 minutes timing adjustable, the default start working time is 15
minutes.
Three kinds of automatic mode and 8 speed manual mode, can be choose
according to movement needs.
Adopting DC24V motor, safety and reliable.
Set with pull rope can do various posture of movement.
Set with wireless remote controller, LCD display.
9
13
10
14
11
15
12
16
NOTE: This is for reference only.
1. Control panel
2.Pedal pad
3.Pull ropependant can be folded while not in use
4.Anti-skidding pad
5.Power interface
6.Fuse
7.Power switch
8.Main body
Accessories
9.LCD Screen
10.Switch
11.Function mode
12.Speed 13.Movement pattern
14.Parameter
15.Timing
16.Speed +
Operation guide
Please read the following matters carefully, then start to use this product. This
product can use power 110V-120V~ 60Hz or 220V-240V~ 50Hz/60Hz, so please
check the home voltage whether is consistent with the specifications of the
product label.
The AC power plug to the power socket, and start the main power switch.
Standing on pedal pad, please press power switch button which locate in control
panel or power switch in remote controller, start default massage function. Please
use the remote controller if you need other massage function.
Note: For the convenience of your analysis, the vibration function of your choice will
be shown by the LCD screen on the control panel shall prevail.
Magic rope
04
05
Operation guide
Control program
Function description
Button
Display
30 minutes miles (Km) and calorie (Cal) consumption comparison table
Auto mode
Switch button: starting and entering into default A2
mode automatically, the movement pattern is jogging,
timing is 15 minutes.
The button of movement pattern: walking, jogging, run
three kinds of movement way. Must be corresponding to
your stepping on the location selection, or by parameters
button to display the mileage and calories can have the
deviation.
Parameters button: Calories display for selection.
(Cal)
300
(Km)
6
250
5
200
4
150
3
100
2
50
1
25
0
Mode
Parameters button: mileage display for selection.
Mode button: Automatic modeswitching.
Auto mode A1
Auto mode A3
Auto mode A2
Unit
Cal
Km
Cal
Km
Cal
Km
Walking
61
1.35
75
1.57
98.8
1.83
Jogging
136
1.92
167
2.35
183
2.63
Run
211
4.07
251
4.64
306
5.45
Walking
Jogging
Run
Manual mode
Mode button: Manual mode switching.
Timing button: The timing time is 5~30 minutes, every
time plus 5 minutes.
Button of
speed +
Button of
speed -
Auto mode: Press these two keys, there
are three grade (A1, A2, A3)speed for
selection. Manual mode: Press these two
keys, there are eight grade(P1,P2,P3,P4,
P5,P6,P7,P8) speed for selection.
(Cal)
400
(Km)
350
8
300
7
250
6
200
5
150
4
100
3
50
2
9
0
1
Unit Cal Km
P1
Mode
Walking
36
06
Cal Km
Cal Km
Cal Km
Cal Km
Cal Km
Cal Km
Cal Km
P2
P3
P4
P5
P6
P7
P8
48.6
59.4
72
84.6
95.4
108
120
Jogging
86.4
109
135
158
181
207
230
253
Run
149
180
208
239
270
298
329
360
Walking
1.04
1.18
1.35
1.49
1.63
1.8
1.94
2.08
Jogging
1.53
1.72
1.94
2.16
2.35
2.57
2.79
2.98
Run
3.31
3.65
4.05
4.42
4.82
5.22
5.59
5.99
07
Walking
Jogging
Run
Cal
Km
The method of usage
The method of usage
Three kinds of different ways of movement (different auxiliary equipment can
be selected during sports, such as magic pull rope,dumbbell)
Magic pull rope movement pattern (walking, jogging, run with three grade can
be free to choose)
Balance pulling way (clenched magic rope with your
Balance pulling way
hands, arms flat, standing in run district)high
frequency vibration in the arms, hips and legs,
effectively lose inside the arm fat, improve the
periarthritis of shoulder and neck soreness,
coordination and balance.
Jogging
Walking
Run
Walking mode: low amount of movement, help to relax the leg muscles, promote the
blood circulation in the legs.
Jogging mode: middle amount of movement, alleviate the leg muscles and nerves,
and achieve fitness effect at the same time.
Run mode: high amount of movement, whole body exercise, consume more energy,
promote blood circulation.
Natural movement pattern (walking, jogging, run three grades can be free to
choose)
Standing way (standing on the machine) relaxes the
Standing way
leg muscle, promote leg blood circulation.
Lying way (Adopt elbow support, abdominal hard
straight, back, buttocks and feet in a line) shaping
healthy body curve, to prevent subcutaneous fat
ptosis.
Sittingand standing stretch movement (Sitting in
the machine, the arm stretch upward, hands in the
head.) Yoga movement, directly to the abdomen,
buttocks fat, slim waist, lift the hips.
Relax shoulder movement (Sitting in the shaping
machine, both hands backward) alleviate the
shoulder and neck muscles, ease the discomfort
of per arthritis of shoulder and shoulder back,very
suitable for white-collar.
Relax leg movement (Sitting in a chair, feet on
the shaping machine naturally) Can quickly
promote the leg blood circulation, relieve leg
varicose veins, very suitable for the elderly.
08
Left and right stretch way (clenched magic rope with
your hands, left / right arm held flat to the opposite
direction traction)vibration in the leg and traction
body from left / right, effective stretching meridians,
consumption of the body on both sides of abdominal
fat, shaping healthy body.
Crouch way( left leg or right leg forward arch, right
leg or left leg backward, both hands to lift the magic
rope) to exercise the leg muscles and knee,
increasing bone density in the leg, contribute to the
cardiorespiratory exercise.
Crouch pulling way (the legs slightly bent, hands
along the back pull rope to lift the magic.)increase
the pressure of the calf and knee, hip joint exercise,
stretching back channels, improve the computer
arm ,mouse hand
Left and right
stretch way
Crouch way
Crouch pulling way
Lying way
Standingway (standing in jogging/run district, to pull
magic rope with your hands)exercise the arm joints
and muscles, promote cervical vertebra corrective
and systemic blood circulation; relieve muscle
soreness of shoulder and back.
Sitting and standing
stretch way
Relax shoulder
movement
During the moving, must be pulled out all the power
cord, then raise the side of shaping machine, reach
to a certain angle (when thecenter of gravity falls on
the pulley), then forward or backward pull (push)
move, move the body shaping machine back to
normal angle.
Standing way
Moving way
In the magic rope mode of motionalso can use dumbbell substitution (as follow chart)
Relaxleg
movement
Note:The above movement is not unique, different people according to their own
needs, choose a different movement pattern.
09
Maintenance
Specification
If your product for shipping, handling and other reasons or stored in low
temperature environment for too long, please stay in room temperature for one
hour before use.
If the product is placed in the special environment such as: local vulnerable to
dust, moisture, sulfur compounds such as erosion, please notify the installation
personnel to do the protective measures, otherwise it may cause body damage.
Before cleaning products, please pull out the power plug from the socket.
Do not use benzene, thinner or any erosion of the solvent cleaning machine.
Please use dry cloth to clean the machine.
Do not be the product of long-term exposure to sunlight, do not near the fire, high
temperature place.
If there will be a few days not to use this product, suggest the power extracted
away and tidily store.
Keep this product in a clean and dry space.
Do not eat in the product, in order to avoid damage to the product.
Storage conditions: at -10 to 55 , humidity for RH 0-85%.
Model: SL-Y12
Name: Body show shaping machine
Rated voltage: 220V-240V~ 50Hz/60Hz
110V-120V~ 60Hz
Rated power : 95W
Maximum load: 115kg
Rated time: 5~30 minutes
Noise: 47.52db
Safety Design:Class
Setting password
1. Under the state of power off
Step 1. First press the switch button of main body more than 3 seconds, you will
hear buzzer sound twice; then continue press the switch button three times;
finally press the switch button more than 3 seconds again, after hear buzzer
sound one time, enter the password at the initial state.
Step 2.Press two buttons of 'movement pattern and speed- ' on the remote
controller, If the screen display 5 numbers, each number in the range 0~f, then
enter the password settings
.
Step 3.Press the button of auto or manual,5 numbers switching back and forth.
Step 4.Press the button of speed +/-,each number can be adjustable
Step 5. After the password adjustment, send data by press 'timing' button,
finished setting till hear the buzzer sound one time.
Step 6. Then press the power button can communication and also into the
massage function interface.
2. The series number of product display, such as 1406220001, ten numbers in total.
Under the state of power off, press two buttons of 'switch and speed-'on
controller, enter the serial number display, screen display 5 numbers, such as
14062
; then press the "movement" button, display 5 numbers, such
as 20001.If not to press the power button, wait for 5 seconds, automatically exit.
Note: If there is a communication error occur at the above operations, the screen
displays Er ,after 10 seconds, the screen off.
10
11
Download PDF
Similar pages