IDS-509PP – Managed Industrial PoE+ Switch

IDS-509PP – Managed Industrial PoE+
Switch
perle.com/products/switches/ids-509pp-industrial-managed-poe-switch.shtml
Industrial 9 Port Managed Ethernet Switch
9 port 10/100/1000Base-T ( RJ45 ) for Gigabit and Fast Ethernet devices
PRO feature set including advanced switching, encryption and IEEE 1588 PTP
PoE/PoE+ PSE capable ports, fully compliant to IEEE 802.3af/at
IP Manageability, VLAN and resiliency management
Digital inputs for generation of alerts
Compact, corrosion resistant case attaches to a standard DIN Rail
Redundant dual power input 48 VDC
Out-of-band management via RJ45 or USB serial ports
Programmable Controller safety and Hazardous Location Certification
-40 to 75C industrial operating temperature ( XT Models )
The IDS-509PP is a 9 port Managed Ethernet Switch that can operate in industrial 10/100/1000-Base-T environments
providing advanced performance and enabling real-time deterministic network operation. These PoE Switches are
classified as Power Sourcing Equipment (PSE). While using standard UTP cables that carry Ethernet data, the IDS-509PP
have up to eight (8) ports that also provide up to 30 watts of power to Powered Devices (PDs) such as wireless access
points, Voice over IP phones and IP cameras. Learn more about PoE.
Perle Industrial-grade Ethernet Switches are designed to stand up to extreme temperatures, surges, vibrations, and
shocks found in industrial automation, government, military, oil and gas, mining and outdoor applications.
Perle’s Fast Setup feature provides simple Plug and Play installation to get your Ethernet devices networked immediately.
The familiar Command Line Interface ( CLI ), via in-band Telnet or the out-band serial console port, will be appreciated by
CCNA ( Cisco Certified Network Associate ) and CCNP ( Cisco Certified Network Professional ) trained engineers.
The PRO feature set in the IDS-305F is ideal for enterprise-grade level environments where additional extensive security
and network integration functionality is required.
1/19
AAA ( Authentication, Authorization, Accounting )security protocols: RADIUS and TACACS+
Secure management sessions via SSH, SNMPv3, Telnet and HTTPS
Management Access Lists (ACL) by IP address and IP Port number
Password Strength Checking
IEEE 802.1x Authentication and Port Security for protection of user access ports
Optimize the performance and intelligence of the network with Advanced Protocols: LLDP, GVRP, Voice VLANs,
MSTP, GMRP, IPv4 IGMP Snooping and IPv6 MLD Snooping
An IPv6 address can be used to manage the IDS-509PP which also supports a comprehensive set of management functions,
such as P-Ring, management VLAN, QoS, RMON, N:1 port mirroring and local alert log.
The IDS-509PP, which comes in a variety of models, are rugged fan-less switches that are hardened to provide superior
reliability in -10 to 60°C, or harsh extended operating temperatures from -40 to 75°C. Every component on every industrial
(XT) model has been designed and tested to handle operating temperatures between -40 and 75C.
All Perle Industrial Ethernet Switches only use high-end components from the leading chip manufacturers to ensure the
highest level of durability and reliability. In addition, all units have a corrosion resistance aluminum case and dual redundant
power input with reverse polarity and overload protection.
Perle has been designing industrial hardware for over 35 years. This expertise was used to design the toughest Ethernet
switches on the market that will keep your system running for years to come.
IDS-509 Industrial Managed DIN Rail Switch Features
Simple
deployment
Zero-touch discovery using Dynamic Host Control Protocol (DHCP), Perle’s “Fast Setup” for first time
installation, provides simple deployment in Ethernet environments
Security
802.1X, port security, Secure Shell (SSHv2); SNMPv3 provides encrypted administrator traffic during
CLI and SNMP sessions; TACACS+ and RADIUS authentication facilitate centralized control and
restrict unauthorized users.
Resiliency
STP, RSTP and MSTP protocols for fast recovery.
Perle’s P-Ring protocol for fast convergence in ring topologies
Link Standby is a link recovery feature for two links that provides a simple alternative to
spanning tree protocols for link redundancy
Buffered Real Time Clock backup
2/19
Manageability
Web Device Manager, Telnet/SSH, HTTPS access, SNMP and Perle’s PerleView NMS for
centralized management
Use an IPv4 or IPv6 address
In-band management via RJ45 or USB serial port
Removable MicroSD flash for configuration files and firmware backup and restoration
Power over Ethernet allocation on a per-port basis
Rugged design
for harsh
environments
Corrosion resistant case
Programmable Controller Safety certified
Certified for hazardous locations
Extended industrial temperature models
Reliable
operation
Fan-less, no moving parts
Dual power input. Connect to separate power sources for redundancy.
Reverse polarity protection
Handles vibration and shock conditions found in
industrial environments
Overload current protection
Real-time
Ethernet
performance
Fast wire-speed , store and forward switching
Auto-sensing for speed and duplex
Auto-mdi/mdix-crossover works with straight and crossover cables
Performance Features
Port Autosensing
Auto
MDI/MDIX
802.3x flow
control
Auto-sensing of port speed and auto-negotiation of duplex on all switch ports for optimizing bandwidth
Medium-dependent interface crossover ( Auto-MDIX ) capability on 10/100 and 10/100/1000 mbps
interfaces that enables the interface to automatically detect the required cable type ( straight thru or
crossover ) and to configure the connection appropriately
IEEE 802.3x flow control on all ports. ( The switch does not initiate pause frames )
3/19
Link
Aggregation
protocol
Static Link
Aggregation
Storm Control
Bandwidth
Control
Monitoring
Static MAC
Addressing
Port Blocking
IPV4 IGMP
Snooping
Increase port bandwidth through link aggregation. Support is provided for IEEE 802.3ad using Link
Aggregation Control Protocol ( LACP ). Up to eight ( 8 ) ports in a single port-channel
Provides the ability to operate under a static ( manual ) link aggregation scenario ( where the remote
switch peer does not support LACP )
Storm control prevents traffic on a LAN from being disrupted by a broadcast, multicast, or unicast storm
on one of the physical interfaces. A LAN storm occurs when packets flood the LAN, creating excessive
traffic and degrading network performance. Storm Control enables limits to be placed on broadcast,
multicast and unicast traffic
Bandwidth Control provides the ability to monitor the flow rates on a per port basis and the ability to
cause an SNMP trap to occur ( selectable ) and put the port in an "error-disabled" state
This feature enables the manual configuration of the MAC addresses on a per port basis. Flooding is
prevented by retaining MAC entries across a reboot of the switch.
Port Blocking provides the ability to block the flooding of unknown layer 2 unicast and multicast traffic
on an Interface
Internet Group Management Protocol ( IGMP ) constrains the flooding of multicast traffic by
dynamically configuring Layer 2 interfaces so that multicast traffic is forwarded to only those interfaces
associated with IP multicast devices.
IGMPv1, v2, v3, IGMP snooping querier mode, IGMP report suppression, topology change notification
and robustness variable features are supported
IPV6 MLD
Snooping
GMRP
With Multicast Listener Discovery ( MLD) snooping, IPv6 multicast data is selectively forwarded to a list
of ports that want to receive the data, instead of being flooded to all ports in a VLAN. This list is
constructed by snooping IPv6 multicast control packets
GARP Multicast Registration Protocol ( GMRP ) provides a constrained multicast flooding facility similar
to IGMP snooping.
GMRP provides a mechanism that allows bridges and end stations to dynamically register group
membership information with the MAC bridges attached to the same LAN segment and for that
information to be disseminated across all bridges in the Bridged LAN that supports extended filtering
services
4/19
Port Quick
Disconnect
In some network environments, it is desirable to move an Ethernet from one switch port to another and
have the device come on-line quickly. The Port Quick Disconnect feature if enabled, provides an
immediate age-out of the MAC addresses learned on the port when the port status changes from a linkup to a link-down state
Manageability Features
Web Device
Manager
Command
Line Interface
( CLI )
SNMP
PerleVIEW
IPv6
DHCP Client
AutoConfiguration
DHCP Relay
DHCP Option
82 Insertion
The Perle Web Device Manager is an embedded Web based application that provides an easy to use
browser interface for managing the switch. Operates with both http and secure https streams. Unlike
competitive products, Java applet technology is not required or used
A familiar text-based Command Line Interface that is based on accepted industry standard syntax and
structure. Ideal for CCNA and CCNP trained engineers, this interface is available via in-band
Telnet/SSH or the out-band serial console port
Manage the switch with an SNMP compatible management station that is running platforms such as
HP Openview or Perle’s PerleVIEW NMS. SNMP V1 and V2C
PerleVIEW is Perle’s SNMP-based network management system that provides a view of the network
with a large scale of Perle networking devices.
Manage with an IPv4 or IPV6 address
Automates configuration of switch information such as IP address, default gateway, hostname and
Domain Name System ( DNS ) as well as TFTP server names. Firmware and configuration file
locations are provided through options 54, 66, 67, 125 and 150
DHCP Relay is used for forwarding requests from DHCP clients when they are not on the same
physical subnet. As a DHCP relay agent the switch operates as a Layer 3 device that forwards DHCP
packets between clients and servers.
Normally used in metro or large enterprise deployments DHCP Option 82 insertion is used to provide
additional information on “physical attachment” of the client. As per RFC 3046, option 82 enables
additional pre-defined information to be inserted into the DHCP request packet ( for DHCP Servers
that support this option )
5/19
DHCP Server
DHCP server
port-based
address
allocation
For networks where a central DHCP server is not provided, the switch can provide a DHCP Server
function for allocation of IP addresses to the connected devices
When Ethernet switches are deployed in the network, they offer connectivity to the directly connected
devices. In some environments, such as on a factory floor, if a device fails, the replacement device
must be working immediately in the existing network
When configured, the DHCP server port-based address allocation feature ensures that the same IP
address is always offered to the same connected port even as the client identifier or client hardware
address changes in the DHCP messages received on that port
LLDP
LLDP-MED
NTP
IEEE 1588 –
PTP (
Precision
Time Protocol
)
LLDP-Link Layer Discovery Protocol as per IEEE 802.1AB is a neighbor discovery protocol that is used
for network devices to advertise information about themselves to other devices on the network. This
protocol runs over the data-link layer, which allows two systems running different network layer
protocols to learn about each other ( via TLVs – Type-Length-Value )
LLDP Media Endpoint Discovery is an extension to LLDP that operates between endpoint devices such
as IP phones and network devices such as switches. It specifically provides support for voice over IP
(VoIP) applications and provides additional TLVs for capabilities discovery, network policy, Power over
Ethernet, inventory management and location information
The switch can provide the time to NTP/SNTP capable client devices ( or other switches, etc ). You can
run the SNTP client and the NTP server concurrently on your system. Therefore you can obtain time
from an outside source and serve that time to the devices connected to the switch.
IEEE 1588 V1 and V2
Boundary Clock V1
Boundary Clock V2
End-to-End Transparent Clock Sync Two Step Operation
End-to-End Transparent Clock Sync One Step Operation
Peer-to-Peer Transparent Clock
End-to-end Boundary clock
Peer-to-peer boundary clock
Microsecond accuracy
File Download
Firmware can be transferred via TFTP, SCP, HTTP, HTTPS or via insertion of a microSD card. Textbased files that can be created or edited by common text editors.
6/19
Secure Copy
Protocol (
SCP )
SCP based on the Secure Shell (SSH) protocol, is a means of securely transferring computer files
between a local host and a remote host or between two remote hosts.
Power Over
Ethernet
Manage the allocation of available power to enabled Power Over Ethernet ports
Availability and Redundancy Features
Spanning
Tree Protocol
( STP )
IEEE 802.1D now incorporated in IEEE 802.1Q-2014, STP prevents bridge loops and the broadcast
radiation that results from them.
Other Spanning Tree features include BPDU guard, Root guard, loop guard, root guard and TCN
Guard
Rapid
Spanning
Tree Protocol
( RSTP )
Interoperable with STP, RSTP ( IEEE 802.1w ) takes advantage of point-to-point wiring and provides
rapid convergence of the spanning tree. Reconfiguration of the spanning tree can occur in less than 1
second
Multiple
Spanning
Tree Protocol
( MSTP )
Originally defined in IEEE 802.1s and now incorporated IEEE 802.1Q-2014, defines an extension to
RSTP for use with VLANs. The Multiple Spanning Tree Protocol configures a separate Spanning Tree
for each VLAN group and blocks all but one of the possible alternate paths within each Spanning Tree.
P-Ring
Perle’s Ring Protocol provides resilient operation of a network made up of managed switches in a ring
topology. The implementation prevents a switch loop scenario and also enables communication within
the ring if a failure occurs somewhere in the ring.
P-Ring also has an auto-configuration feature that automatically determines the master control switch
in the ring reducing installation time.
Recovery time of 10 ms or better in rings composed of up to 14 switches
Link Standby
A link recovery feature using a primary and backup link. Provides a simple alternative to spanning tree
protocols for link redundancy
VLAN Features
VLAN Range
Up to 255 VLANS across a VLAN ID range of 1 to 4094
7/19
GVRP
Voice VLANs
VLAN
Interfaces
Generic Attribute Registration Protocol (GARP) VLAN Registration Protocol (GVRP) is an application
defined in the IEEE 802.1Q standard that allows for the control of VLANs. With GVRP, the switch can
exchange VLAN configuration information with other GVRP switches, prune unnecessary broadcast
and unknown unicast traffic, and dynamically create and manage VLANs on switches that are
connected through 802.1Q trunk ports.
Voice VLANs enables one to separate, prioritize, and authenticate voice traffic moving through your
network, and to avoid the possibility of broadcast storms affecting VoIP (Voice-over-IP) operation. With
an IP Phone connected to an access port, a switchport voice VLAN enables the use of one VLAN for
voice traffic and another VLAN for data traffic from an Ethernet device attached to the phone
Perle switches provide the ability to configure management VLAN interfaces. This enables network
administrators to access the switch’s management interface from separate VLAN networks
Security Features
IEEE 802.1X
Provides secure access to switch ports from a central RADIUS server. The switch operating
as an authenticator interacting with an 802.1X compliant supplicant ( PC or industrial device)
through the use of the EAPOL protocol. Authentication will be granted/denied through an
external RADIUS server.
RADIUS assigned VLAN
IETF 64 (Tunnel Type)
IETF 65 (Tunnel Medium Type)
IETF 81 (Tunnel Private Group ID)
Guest VLAN and Restricted VLANs are
supported
For non-802.1X devices found in industrial
applications, the switch can use the client MAC
address for authorization through the use if MAB
( MAC Authentication Bypass )
Switch can also be configured as an 802.1X supplicant ( edge switch ) with an 802.1x-aware
upstream switch
Login Banner
and MOTD
A login message banner presented during sign-on can be configured by the network administrator.
A Message Of The Day can also be created for presentation to an authenticated user.
Password
Strength
Checking
Many organizations require stringent management over the strength level of their passwords. When
enabled, Perle extends this capability to local passwords stored on the switch enforcing strong
passwords to be used.
8/19
Port Security
– Secure
MAC
Addresses
Management
ACL
RADIUS
Management
Access
Authentication
TACACS+
Management
Access
Authentication
This port security feature provides the ability to restrict input to an interface by limiting and identifying
MAC addresses of the stations allowed to access the port ( Access or Trunk ) and will take specific
actions when violations occur.
Restricting access to management functions can be configured by protocol or IP address selection are
provided. This enables administrators to allow only specific workstations using particular protocols to
be able to access the management functions of the switch
AAA support for RADIUS servers that Authenticate, Authorize and Account management sessions
AAA support for TACACS+ servers that Authenticate, Authorize and Account management sessions
Secure
Socket Layer
( SSL )
SSL provided for secure browser sessions using HTTPS
Secure Shell (
SSH )
SSH provided for secure SSH session for CLI and SCP file transfer sessions
SNMPV3
Support provided for secure version 3 of SNMP
Quality of Service ( QoS ) and Class of Service ( CoS ) Features
Classification
Congestion
Avoidance
Egress
Queues and
scheduling
IP ToS/DSCP and IEEE 802.1p CoS
Weighted Fair Queuing or Strict Queuing
4 traffic class queues per port
output queue mapping
DSCP to output queue mapping
Monitoring Features
9/19
Port Mirroring
RMON
Syslog
Alert Log
Traceroute
Virtual cable
test
N:1 Port Mirroring is a method of monitoring network traffic. With port mirroring enabled, the switch
sends a copy of one or more ports to a predefined destination port. Selection of Transmit, Receive
frames or both can be made
RMON statistics provided for statistics, history, alarms and events for network monitoring and traffic
analysis
Facility for logging systems messages to an external SYSLOG server
Facility for logging systems messages locally
Layer 2 traceroute to identify the path that a frame takes from source to destination
A test that enables the detection of potential copper cabling issues such as pair polarity pair swaps and
excessive pair skew as well as any opens, shorts or any impedance mismatch. Will report the distance
in the cable to the open or short.
Power Supply
Monitoring
Provides the status of power supplies of the switch
Internal
Temperature
Monitoring
The internal ambient temperature of the switch can be obtained from the management interfaces
10/19
Alarm
Processing
The switch can monitor global switch conditions as well as individual ports. These alarms can be
configured to send messages to ;
an internal log file
external Syslog server
SNMP trap server
An external alarm device such as a bell, light or other signaling device via the switch’s built-in
dry contact alarm relay
Global Status Monitoring Alarms
Dual power supply alarm
Port Status Monitoring Alarms
Link Fault Alarm ( IE loss of signal )
Port not forwarding alarm
Port not operating alarm ( failure upon start up tests )
FCS Bit error rate alarm
Alarm Relay
Digital Inputs
Power Over
Ethernet
When enabled, energizes the built-alarm relay triggering an external alarm circuit such as a bell, light or
other signaling device according to alarm conditions set
Two Digital Inputs are provided that can be used for generation of alarms ( SNMP trap, energizing of
on-board Alarm Relay,etc )
Monitor the amount of power allocated to each port
Management and Standards
11/19
IEEE
Standards
SNMP MIB
Objects
IEEE 802.3 for 10Base-T
IEEE 802.3u for 100BaseT(X) and 100BaseX
IEEE 802.3ab for 1000Base-T
IEEE 802.3z 1000BASE-X
IEEE 802.3x for Flow Control
IEEE 802.1D-2004 for Spanning Tree Protocol
IEEE 802.1w for Rapid STP
EEE 802.1s for Multiple Spanning Tree Protocol
IEEE 802.1Q for VLAN Tagging
IEEE 802.1p for Class of Service
IEEE 802.1X for Authentication
IEEE 802.3ad for Port Trunk with LACP
IEEE 802.1AB LLDP
IEEE 1588v1 PTP Precision Time Protocol
IEEE 1588v2 PTP Precision Time Protocol
IEEE 802.3at Power Over Ethernet
RFC 1213-MIB II
RFC 1493-BRIDGE-MIB
RFC 1907-SNMPv2-MIB
RFC 2012-TCP-MIB
RFC 2013-UDP-MIB
RFC 2578-SNMPv2-SMI
RFC 2579-SNMPv2-TC
RFC 2819-RMON-MIB
RFC 4502-RMON2-MIB
RFC 2613-SMON-MIB
RFC 2863-IF-MIB
RFC 4363-Q-Bridge-MIB and P-Bridge MIB
RFC 4318-RSTP-MIB
IP-MIB
LLDP-MIB
LLDP-EXT-MED-MIB
IEEE8021-PAE-MIB ( 802.1x )
Hardware Features & Technical Specifications: IDS-509PP Industrial Managed DIN Rail Switch
Power
Dual Power
Input
Both inputs draw power simultaneously. If one power source fails, the other live source can, acting as
a backup, supply enough power to meet the operational needs of the switch.
54 VDC nominal 50-57 VDC ( PoE+ IEEE 802.3at type 2 )
48 VDC nominal 44 to 57 VDC ( PoE IEEE 802.3af or IEEE 802.3at type 1 )
12/19
Power
Connector
4-Pin Removable Terminal Block.
Grounding screw on metal chassis
Overload
Current
Protection
Fused overload current protection
Reverse polarity
protection
The positive and negative inputs can be reversed providing safe and simple power connectivity.
Access Ports
RJ45 PoE Ports
8 shielded RJ45 ports for 10/100/1000Base-T up to 100 meters ( 328 ft )
Auto-negotiation
Auto-MDI/MDIX-crossover for use with either crossover over straight-through cable types
Ethernet isolation 1500 V
Amount of available power to PoE ports is dependent upon sufficient voltage and power being
supplied to the switch
RJ45 port ( nonPoE )
1 shielded RJ45 ports for 10/100/1000Base-T up to 100 meters ( 328 ft )
Auto-negotiation
Auto-MDI/MDIX-crossover for use with either crossover over straight-through cable types
Ethernet isolation 1500 V
RJ45 Serial
Console port
RJ45 DTE
Optional rolled and straight thru RJ45 cables and DB adapters are available
USB Serial
Console port
MicroUSB Type B female port for serial console management. Used as an alternative port for out of
band management connections
13/19
Digital Inputs
Two Digital Inputs are provided that can be used for generation of alarms ( SNMP trap, energizing of
on-board Alarm Relay,etc )
Alarms
NC (Normally Closed ) or NO ( Normally Open ) dry contact.
1A @ 24V
Removable Storage
MicroSD slot
A MicroSD flash card can be inserted for configuration files and firmware backup and
restoration
Alarms
Alarm Relay
NC ( Normally Closed ) dry contact.
1A @ 24V
Switch Properties
Standards
IEEE 802.3 for 10Base-T
IEEE 802.3u for 100Base-TX
IEEE 802.3ab for 1000Base-T
IEEE 802.3x for Flow Control
IEEE 802.3at Power Over Ethernet
Processing Type
Store and Forward
MAC Address
Table Size
8K
VLAN ID range
1 to 4094
14/19
IGMP groups
1024
Packet Buffer
Memory
1 Mbit
Indicators
Power
This LED is turned on when the appropriate level of voltage is applied to one or both of the power
inputs
System
Indicates whether the switch O/S is operating normally
RJ45 Ethernet
These integrated colored LEDs indicate link, activity and speed for each port.
Alarm
The alarm LED ( Red ) will be turned on under alarm conditions
P-Ring Master
LED
Status of the P-Ring Master
Backup Network
Coupling
Indicates whether or not the “Backup Network Coupling” feature is enabled ( Redundant links
connecting two P-Ring networks )
External Configuration DIP Switches
RM
When enabled, designates this switch as the P-Ring Master
BC
Activate Backup Coupling between 2 ring networks
Environmental Specifications
Operating
Temperature
Ranges
Standard temperature models ( Std ): -10° C to 60° C (14° F to 140° F).
XT Industrial extended temperature models ( Ind ) : -40° C to 75° C ( -40 F to 167° F )
15/19
Storage
Temperature
Range
Minimum range of -25° C to 70° C (-13° F to 158° F). -40 C to 85 C (-40 F to 185 F) for industrial
extended temperature models
Operating
Humidity Range
5% to 90% non-condensing
Storage
Humidity Range
5% to 95% non-condensing
Operating
Altitude
Up to 3,048 meters (10,000 feet)
Chassis
Metal with an IP20 ingress protection rating
Din Rail
Mountable
DIN Rail attachment included. Mounts to standard 35 mm DIN rail in accordance with DIN EN 60175.
Removable to accommodate optional Panel/Wall mount kit
Product Weight and Dimensions
Weight
1.5 kg
Dimensions
75 x 130 x 121mm
Packaging
Shipping Weight
2.0 kg
Shipping
Dimensions
170 x 260 x 70 mm
Standards and Certifications
16/19
Safety
UL 60950-1
IEC 60950-1:2005+A1:2009 and
EN 60950-1:2006+A11:2009+A1:2010+A12:2011
CE Mark
UL 61010-1 and UL 61010-2-201 ( Standard for Safety for Programmable Controllers )
Emissions
FCC 47 Part 15 Class A
CISPR 22:2008/EN55022:2010 (Class A)
CISPR 24:2010/EN 55024:2010
EMC and
Immunity
CISPR 24:2010/EN 55024:2010
IEC/EN 61000-4-2 (ESD)
IEC/EN 61000-4-3 (RS)
IEC/EN 61000-4-4 (EFT)
IEC/EN 61000-4-5 (Surge)
IEC/EN 61000-4-6 (CS)
IEC/EN 61000-4-8 (Magnetic Field)
IEC/EN 61000-6-2 ( General Immunity in Industrial Environments )
Industrial Safety
UL 61010-1 and UL 61010-2-201 ( Standard for Safety for Programmable Controllers ). Formerly
known as UL508 (Safety standard for Industrial Control Equipment )
Hazardous
Locations (
Hazloc )
ANSI/ISA 12.12.01, Class 1 Division 2 Groups A-D ( formerly known as UL 1604 ) *
Environmental
Reach, RoHS and WEEE Compliant
Other
ECCN: 5A992A
ATEX Class 1 Zone 2 *
HTSUS Number: 8517.62.0050
17/19
5 year Warranty
Contents
Shipped
Industrial Ethernet Switch with DIN Rail attachment
Terminal block
Installation guide
* pending
IDS-509PP Industrial Switch Diagram
Select a Model to obtain a Part Number – IDS-509PP
Std = Standard Temperature models: -10° C to 60° C (14° F to 140° F).
Ind = Industrial Extended Temperature Models: -40° C to 75° C ( -40 F to 167° F )
Model
Temp
10/100/1000Base-T RJ45 PoE+
10/100/1000 Base-T RJ45
IDS-509PP
Std
8
1
18/19
IDS-509PP-XT
Ind
8
1
Industrial Ethernet Switch Accessories
Panel Mount
kit PM3
Brackets for attaching 30 to 75mm wide Perle IDS industrial switches inside a control panel or to a wall.
Rack Mount
Kit RM4U
Bracket for mounting Perle DIN Rail switches in a standard 19” rack. Occupies “4U” of vertical rack
space. 275 mm ( 10 inches ) deep
DIN Rail 48V
Power Supply
IDPS-48-240-XT - DIN-Rail 48 VDC, 240Watt power supply with universal 85 to 264 VAC or 120-370
VDC input, -20 to 70°C extended operating temperature. Power Supply Specifications.
DBA0020C
RJ-45F to DB-9F crossover (DTE) adapter for Perle serial console ports with Sun/Cisco pinout.
#1100300-10
19/19
Download PDF
Similar pages