ADVANCED ASSEMBLY
T E C H N O L O G Y
Underfill Process
CONTENT
AOI & AXI
1-2
3-4
SMD Tower Storage
5-6
7-8
Stencil Cleaning
PCB Cleaning
9
10
Cleaning Solution
Reflow Oven
Vaccum Reflow
Automatic Optical Insp
11
12
13 - 14
15 - 16
Pick & Place
17 - 18
19 - 20
Solder Paste Jet / Print
SMT Adhesive Dispense
Solder Paste Inspection
21
22
23
Precision Dispensing Systems
Automatic Calibration Station
Max Series
•
•
•
•
•
•
•
•
•
•
•
•
Compact Foot Print
Rock Steady Unibody Frame
Auto X,Y,Z Calibration
Heated/Non Heated Dispensing Capabilities
Accuracy of ± 0.001” (0.025mm)
Up to 38,000 dph
Linear Speed 30”/sec (762mm/sec)
Up to 2 Valve Capability
Light Weight Z Height Touch Probe
Red/Blue Light Illuminator
High Speed GPD Cyclops™ Vision
Needle Cleaner
Work Area up to 14.1” x 12” (358 mm x 305 mm)
MicroCell
•
•
•
•
•
•
•
•
•
•
•
•
Compact Foot Print
Rock Steady Unibody Frame
Auto X,Y,Z Calibration
Accuracy of ± 0.001” (0.025mm)
2 Valve Capability
Red/Blue Light Illuminator
High Speed GPD Cyclops™ Vision
Needle Cleaner
Work Area 12” x 12” (305 mm x 305 mm)
ClearVU™ Vision (programmable zoom & focus)
Ergonomic, Side Mount Monitor Arm
Live Process-Viewing Camera & Over Head Display
DS Series
•
•
•
•
•
•
•
•
•
Inline, Standalone & Heated Models
Auto X,Y,Z Calibration
Accuracy of ± 0.0015” (0.0381mm)
3 Valve Capability
Red/Blue Light Illuminator
28,000 dph
Needle Cleaner
Work Area up to 24” x 24” (609 mm x 609 mm)
Automatic Vision
1
Weight Scale
Red/Blue Light Illuminator
Applications:
SMT Adhesives
Solder Paste
Underfill
Dam and Fill
Globe Top
Conductive Adhesives
Thermal Greases
Two Part Materials.
UV Glue
PCD Valve (Positive Cavity Displacement)
Micro-Dot Valve
NCM Valve (Non Contact Metering)
HyFlow Valve
•
•
•
•
•
•
•
Volumetric dispensing for low and high viscosity materials
High torque servo for accuracy
Able to easily dispense heavily filled materials
Will not shatter or smash fillers
•
•
•
•
•
•
•
•
•
•
High speed, No needle method of dispensing
Works with Flux, Underfill, SMT Adhesive,
UV Curable Glues, Conductive Adhesive
No board planarity issue, dispense at 1-3mm
height.
2
Encoder with 57,000 counts per revolution
Servo Motor
High Torque transmission
Quick release cartridge
Precision machined auger and cartridge
High Volume & Flow Rates
Mid to High Viscosity
Abrasive Fluids
Easy Maintenances
Encoder with 8,000 count per revolution
Force Convection Nitrogen Reflow Oven
SMT Nozzle System with
Center Support
ABS Process Gas Cleaning
Intelligent Nitrogen Control
Inlet Condensation Trap
Dual Lane
Modular Cooling Zone
All SMT reflow soldering systems guarantee optimum process reliability with it innovative technology and feature the
following advantages:
1) Special Nozzle system for Optimum heat transfer
2) Sophisticated control concept for lowest possible energy and nitrogen consumption.
3) Multi stage condensate filter for efficient cleaning.
4) 15” touch screen with user-friendly operator interface.
5) Process chamber in stainless steel design.
6) Modular cooling stage concept with 1-5 cooling stages.
3
SMT Reflow Oven with Integrated Vacuum Soldering
Without vacuum
With vacuum
SMT Vacuum Soldering System
SMT Vacuum Module
system for improving
quality of solder
joints. Voids in the
solder joints can be
reduced to a
minimum.
• Vacuum Process
can be switched
on or off.
• Nitrogen or air
soldering possible
• Vacuum process
parameter
Settable
• No increase in
nitrogen
consumption.
• Small foot print.
HTT System (High Temperature Temper System)
HTT has been designed especially for drying,
tempering, curing and heating for subsequent
testing.
• Single and up to 5 lanes track concept
• Maximum of 20 heating zones.
• Length from 1.5m up to 10m with steps of 0.5m
• Perfect heat transfer properties
• Excellent energy efficiency rating.
SMT Cube
SMT Cube Temperature Treatment System
• Hot Function Test for Temperature
ranging from 60°C to 140°C.
• Cooling to Room Temperature for
less than 40°C and more than 25°C
• Cold Function Test for Temperature
of -50°C to -10°C
SMT UV Curing System
SMT UV curing system, modular variable machine design for UVcuring of ready mounted control units or PCB with extended pass
through height.
• complete process reliability over a long production period
• lifetime of UV light source > 6,000 hours
• Start-up-time < 1 minute
• No expenditure maintenance (no checking and readjusting of the
UV light source)
• Fully integrated into SMT machine data system (management data
system and MES)
• Significantly lower costs.
4
MY100DX
High mix at high volumes
• Top speed up to 34,000 cph
• IPC net throughput 27,500 cph
• 24/7 reliability
• Future proof accuracy
• Up to 160 feeder positions
• Flexibility and All-In-One
MY100SX
High mix at medium volumes
• Top speed up to 21,500 cph
• IPC net throughput 17,800 cph
• 24/7 reliability
• Future proof accuracy
• Up to 176 feeder positions
• Flexibility and All-In-One
MY100LX
High mix at low to medium volumes
• Top speed up to 15,000 cph
• IPC net throughput 13,500 cph
• 24/7 reliability
• Future proof accuracy
• Up to 176 feeder positions
• Flexibility and All-In-One
Agilis™ Flex feeders
Feed anything on tape
•
Feed anything from small chip components to large ICs
and connectors.
Unique electronic and barcode identification
•
Simple feeder snap-in mechanism
•
Add/remove feeder on-the-fly
•
Fits any position in magazine
•
5
MY500 JET PRINTER
Jet Printing for faster response time
•
No stencils
•
No ordering, handling, storing or cleaning stencils
•
No cleaning solvents or other consumables
•
Lower operator cost
•
Higher equipment utilization
•
Closed system for solder paste
•
Jet Printing uses less paste than screen printing
•
Clean handling - healthier working environment
•
Speed:
30 000 cph equivalent
•
Dot volume:
5-15 nl
•
Dot diameter:
0.33 – 0.47 mm
SMD Tower
Automated & Intelligent Material Handling
• No misplaced components in stock
• No mix-up of components
• All stock movements are recorded, components are
always booked in and out.
• Availability check for ensuring component availability
before set- up or production start.
• Kit lists or single part numbers are provided
sequentially for shorter set-up times.
• Controlled atmosphere with dry air unit
• Monitoring of storage atmosphere in SMD Tower,
Temperature and relative humidity
• Monitoring of floor life (out of bag) for MSDs
• MSD classification according to IPC/JEDEC 033B
• Warning message for exceeded floor life
• No repacking of MSDs
6
we imagine
cleanness like this…
Excellent cleaning solution for you
Super SWASH
Automatic Spray Cleaning System for Stencils,
Misprints and de-fluxing
Advantages of Super SWASH
• Very low consumption of cleaning agent thanks to
optimised nozzles and chamber shape!
• Short process times, programmable spray field
width.
• Chamber hermetically closed during cleaning by
automatically controlled vent flaps.
• Integrated window and backlit wall to check process.
• Machine controlled with PC – WINDOWS 7 SW
platform.
• Graphical touch screen interface.
• All process parameters controlled and monitored by
PC, adaptive control of process time.
• SPC – traceability, log file for machine activity.
• Compressed air knife for dewatering and drying
saves energy and time.
• No additional facility for DI water needed.
STENCILCLEAN SIA
Spray Cleaning System for metal and plastic Stencils
Advantages of STENCILCLEAN SIA
• Designed for solder paste cleaning q as well as cleaning
SMT glue from thick stencils (PumpPrint®, VARIDOT® etc.)
– cleaning media heating in basic configuration.
• Uses self- rinsing cleaning agents – no waste water
problems from rinse.
• Motor-driven spray-arms rotate simultaneously. Cleaning
without risk of damage even to very thin and fine stencil.
• Safety clutch and rotation monitoring of spray manifolds
assures safe process and protection of stencil against
damage from incorrectly placed stencils.
• Spray chamber equipped with special automatically
controlled exhaust/inlet air flaps. Hermetically closed
during spray.
• Efficient drying with hot air circulation and controlled
ventilation through exhaust/inlet air flaps.
• Compact design with very small floor space requirement.
.
• Easy transport even through 80 cm doors.
7
COMPACLEAN
Automatic Spray Cleaning System for PCB
- de-fluxing,
Misprints and Solder pallets
Advantages of COMPACLEAN
• Very low consumption of cleaning agent!
• Machine controlled with PC – WINDOWS 7 SW platform.
• Graphical touch screen interface.
• All process parameters controlled and monitored by PC,
adaptive control of process time.
• SPC – traceability, log file for machine activity.
• DI water plant integrated, including measurement of
conductivity.
• Efficient hot air drying up to 110 °C.
• Cooling fan to cool down after drying.
• Machine can work as a fully closed loop system without
any waste drain.
MODULECLEAN
Flexible Cleaning System for all tasks and high throughput
Advantages of MODULECLEAN system
• Automatic parallel transport system or robotic one which
allows select specific sequence of processes.
• Completely new design of process chambers provide
high efficiency.
• Big capacity on small place.
• Highest possible flexibility of configuration depending on
capacity, customer’s process and waste water
limitations.
• Can be built totally to customer specification.
• Can combine different cleaning techniques and different
processes in one system.
• Can provide full process data traceability up to single PCB
level.
• Can handle extremely heavy assemblies with tall
components.
• Very robust system for harsh plant environment in
continuous production.
• Cart as a sliding buffer for easy loading and unloading
operation.
• System has its own re-cycling plant integrated.
• Rinsing with several cascade of DI water system can be
configured.
• Easy capacity balancing by doubling of modules.
8
OptiCon SPI-LINE 3D
In contrast to other solder paste inspection systems
for mounted PCBs, the OptiCon SPI-Line 3D impresses
with the exact measurement of the applied solder
paste.
The fringe projection based three-dimensional image
recording is operated without moving parts. Core
element is a specifically developed 3D camera head.
It guarantees a reliable solder paste monitoring, keeping
inline cycle times thanks to optimised speed.
The user-friendly software is self-explanatory, up-todate and can be operated per touchscreen.
OptiCon TurboLine
Inline AOI System for High-End Inspection in Large
Scale Production
The OptiCon TurboLine AOI system’s special features
are opportunities for double-sided inspection as well
as various camera and illumination configurations.
It is possible to inspect the PCB bottom side without
assembly turning. This is a decisive advantage over
common AOI systems as inline speed is guaranteed.
The rotatable angled-view and the segmented band
module also help for faster inspection.
OptiCon X-Line 3D
3D in-line X-ray inspection system for maximum fault
coverage using digital tomosynthesis with outstanding
inspection speed.
Benefits of the 3D X-Ray Inspection:
• Safe inspection of double-sided assembled PCBs
• Reconstruction of any layers
• Spatial allocation of detected faults
• Fast and user friendly test program generation by
using a single unified library
9
Advanced Rework System
FINEPLACER core
Industry leading cost effective rework
• Automated soldering processes
• Compact and robust design
• Vision alignment system with Fixed
beam splitter
• Intelligent thermal management
• Real time process observation camera
• Reproducible placement accuracy
• Coordinated control of all process
parameters: temperature, flow, time,
process environment
• Fast process development
Micro Assembly System
FINEPLACER lambda ma
Sub- Micron Bonding Platform
• Placement accuracy up to 0.5 μm
• Component from 0.07 mm - 60 mm
• Supported substrate size up to 6”
• Closed loop force control
• Very small footprint
• Compact and modular design
• High quality optics
Micro Assembly Processes
• Thermocompression
• Thermosonic
• Ultrasonic
• Soldering (In, AuSn, C4, eutectic)
• Adhesive technologies (ACP, Curing)
• Mechanical assembly
• Curing (UV, thermal)
• Single Laser / Laser bar bonding
• VCSEL, photo diode assembly
• LED bonding
FINEPLACER pico rs
High density rework
• Automated soldering processes
• Modular design
• Vision alignment system with fixed
beam splitter
• Integrated Process Management
(IPM)
• Real time process observation
camera
• Process transfer from system to
system
• High level of application flexibility
• Highest placement accuracy
Advanced Rework
Applications
• BGA, µBGA, CSP, QFN,
PoP, QFP, PGA,
• Small Passives (0201,
01005)
• RF shields, RF frames
• Connectors, sockets
• C4 Flip Chip
• Reworkable Underfill,
conformal coating
• Single Ball Rework
FINEPLACER matrix ma
Flexible Asembly Platform
• Placement accuracy better
than 3 μm
• Component sizes from 0.125
mm
• Supported substrate size up to
12”
• Closed loop force control
• Low maintenance, easy service
access
• Fast conversion from assembly
platform to hot air soldering
station
FINEPLACER femto
Automated Sub-micron Bonder
• Placement accuracy 0.5
μm
• Component sizes up to
100² mm²
• Working area up to 450 x
150 mm²
• Supports wafer up to 12”
• Bonding forces up to 500 N
• Small footprint and
compact design
10
PCB HANDLING EQUIPMENT
Automatic Loader/Unloader
•
•
•
•
•
•
Sturdy and stable design
User friendly ‘soft touch’ LED membrane control panel
Pneumatic clamps provided for magazine alignment
Pneumatic pusher’s pressure regulated
High throughput with short magazine change-over time
SMEMMA compatible
Advance Platform Loader/Unloader
•
•
•
•
•
•
•
Touch screen panel enables swift adjustment for various types
of magazines in operation
Multi-magazine type manual loading (quantity depends on
dimension of magazine)
Stores up to 10 different types of magazine dimensions.
Suitable for ‘high-mix’, ‘low-volume’ operations.
Servo motor drive for precise indexing
Pneumatic pusher’s pressure regulated
SMEMA compatible
Laser Marking Cell
•
•
•
•
•
•
•
•
•
•
•
•
•
10 watt CO2 (Class 4)
Class 1 Laser Protected housing
Air Cooling System
Fume Extraction System
User friendly software
Digitally controlled linear axis for X & Y movements
Slectable by-pass operation
Automatic width adjustment conveyor
PCB side clamping
PCB lifting system for constant focal point
Short product chang-over time
Barcode scanner or camera for readability check
Industrial PC & 17” LCD monitor
SMEMA compatible
11
NIX 3D PCB Cleaner
POWER CYCLONE 3D
•
•
Inline, quickly and efficiently removes dust and particulates
from PCB surface before solder application
Reduce defects with Power Cyclone's high removal rate
The NIX Power Cyclone 3D provides unprecedented
dust and particle removal performance to dramatically
reduce bleeding, bridges, missing solder, insufficient
solder, and other defects caused by particulates.
Customer Evaluation Results
12
MuCOM ∑ CM
SUPER ∑ CMII HIGH PERFORMANCE PRECISION DISPENSER
The PATENTED Sigma Functions of SUPER
CMII:

Automatic Fluid Drip Prevention
The automatic vacuum control system prevents fluid drips and aeration

Automatic Correction of Water Head Variation
The function eliminates variations in dispensing volume that are caused
by water head differences, giving incredible accuracy especially for large
syringe sizes.

Automatic Level Alarm
Accurate detection of remaining quantity of fluid in syringe
INCREDIBLE HIGH SPEED NON-CONTACT DISPENSING
13
Micro-Dispensing at ITS BEST!
Throw Out the Hassle of
Cleaning and Costly Wastage!
Wide Range of Dispensers for Every Application
One Command
Deviation
Correction
Mapping Function / Camera Teaching
Dispensing / Measuring / Observing
14
Create Dispense
Patterns via our
Touch Screen
UV LED TECHNOLOGY
Spot UV LED
STANDARD UV LED
EXECURE-H-1VC II
•
•
•
•
•
•
•
•
Multi-drive of up to 8X head units
Match with various HOYA UV LED Lens
Individual control of intensity and time for each channel
Long life time of head unit
Low power consumption
Small footprint
High intensity multi-chip type
Special elliptical irradiation shape
H-1VH
MULTI-CHIP UV LED
MULTI-CHIP UV LED (ELLIPTICAL)
H-1VH4-V1 + YA4-G1
H-1VH4-V1 + H04-W16L
H-1VH4-V1 + H04-D12L
Large Area UV LED
•
•
•
•
•
•
•
Multi-drive of high intensity LED chip
Customized irradiation shape to suit
different applications
Programmable irradiation intensity and
time
Long life time of head unit
Certified CE marking
Standard fan cooling or high intensity
water cooling models available
External controller for machine
interfacing
SQUARE SHAPE IRRADIATION
15
LINE SHAPE IRRADIATION
UV LAMP LIGHT SOURCE
EXECURE 4000
EXECURE 4000
•
•
•
•
•
•
UL 750
Flexible layout – vertically or horizontally
Large reduction in apparent power, compatible with world
voltages
Convenient and easy filter setting
Adaptable to wide variety of light guides such as multi-branch,
special shape and fusion type are possible
Comes with standard 200W Mercury Xenon lamp, guaranteed
lamp life of 3,000 hours
Easily connected to PC through RS485 port for aperture
settings, program patterns, etc
UL 750
•
•
•
•
Balanced high power and long life at its class
Comes with high output 750W Super High Pressure Mercury
lamp, guaranteed lamp life of 2,000 hours
Suitable for high power UV applications
Adaptable to light guides or direct irradiation lens unit
UV Accessories
•
•
•
•
•
Custom fiber optic light guide for various UV applications.
Multi-branches to maximize throughput
Custom lens to achieve required intensity profile
Custom UV filters to cut unwanted wavelength
Simple UV power meter for intensity measurement
UV protective goggles
Major UV Applications
•
•
•
•
•
•
Assembly of image sensor, lens unit and LCD panel for digital camera
Assembly of HDD for personal computer
Assembly of camera module, touch panel and image sensor for smart phone
Assembly of injection needles, catheter and optical fiber for medical industry
Assembly of optical pick-up lenses unit for CD, DVD and Blu-ray
Sealing, printing and coating for electronics industry
16
Unique Low Fluid
Charge Pressure
Dosing
Very High To
Low Viscosity
ViscoMT-XS
2-Part Fluids
Precise Mix and
Dispense
ViscoDuo-V
ViscoTreat-Inline
PREEFLOW Series
EcoPEN / EcoDUO
ViscoDuoV-4/4
ViscoTreat-lm
17
The working Principle of Viscotec corresponds to an Endless Piston
Device
Just Imagine a piston.
This allows an endless, precise Pulse-free dispensing flow unlike
other conventional methods of dosing.
Or even better, several pistons
behind each other.
All manner of fluids, whether with Fillers, high/low viscosities are
handled efficiently with
•
•
Now we’ll make the wall thickness
of the piston zero...
and importantly,
•
and change the piston shape
slightly.
High Precision,
Low Shear Stresses
Very Low Fluid Charge Pressures
Applied Industries:
Automotive, Electronics, Photovoltaic, Aviation,
Cosmetics, Food and Beverage, Pharmaceuticals (Sterile)
Volla - the endless piston principle!
Emptying systems
+
Preparation systems
ViscoMT-C
Cartridge emptying
ViscoTreat-Inline
Inline degassing
+
Dosing systems
ViscoPro
1-component
dispenser
ViscoMT-D
Pail emptying
ViscoTreat-R
Mixing
and circulating
ViscoDuo-V
2-component
dispenser
ViscoMT-XS
Bucket emptying
ViscoMT-L
Barrel emptying
ViscoTreat-H
Hydraulic accumulator
18
ViscoDuo-V 4/4
2-component
dispenser for the
smallest volumes
19
20
LONG ARC
LAMPS
Compact Short Arc Lamp
Compact Xenon Short Arc Lamp
For UV Spot-Cure Systems.
For wafer inspection and
chemical analytical
instrument in semiconductor
industry
Large Xenon Short Arc Lamp
Large Short Arc Lamp
SSD Lamp
Widely used in entertainment
industry, from studio lighting,
imaging projector, solar
simulator, lamplight device,
fish luring etc.
Widely used in PCB, LCD and
PDP industry.
For inspection process
such as liquid crystal and
semiconductor
For wide area UV
hardening and surface
treatment.
Anaerobic Adhesives
UV Curing Anaerobic Structure Bonding Adhesives
Heat Curing Impregnation Materials
UV Curing Adhesives
Activator Curing/ 2-parts Modified Acrylic Adhesives
Solvent type Adhesives
One Part Heat Curing Epoxy Adhesives
Activator/ Primer
Other Adhesives (Customised to Requirements)
21
ELECTRO PRESS JP Series
• Driven By AC Servo Motor. Clean, Quiet and Efficient.
• Stand Alone, Head, Unit Types with 5kN to 80kN Pressing
Capacity
• High Accuracy, Capability and Multi-functional
• Various Modes of Press Conditions Selectable
• Low Impact, High Yield and Productivity
• Complete Quality Control, Production and Process
Traceability with complete process records.
• Touch Panel Display and Large LCD screen
• Self-Diagnosis function or Errors
THE WORLD’S FIRST
CLEAN-ROOM CLASS 10
COMPLIANT PRESS MACHINE!
QUICHER AUTOMATIC SCREW FEEDER
NS - Series
•
•
•
•
•
NJ - Series
Automatic screw feeding
Handles various screw types
Easily replaceable Rails for screw changes
High productivity
Improved flexibility
NEJIKURA - Series
Examples of Screws which can be fed
22
SPECIFICATIONS at a Glance
Force Measuring Range
0 - 250 grams
Speed
100 - 600 + 5mm/minute in 50mm increments
Angle
160-180 degrees
Accuracy
+ 3%
Tape Widths
8, 12, 16, 24, 32, 44, 56mm (optional 8 to 120mm)
Dimensions
318mm H x 368mm W x 737mm D x 29.5kg
AC Input
100 – 240 VAC
PC/Laptop Control
Windows based proprietary FORCEWare™ Software, Data capture, SPC Analysis
23
Company Profile
Dou Yee Enterprises (S) Pte Ltd is the premier total industrial solutions provider in the Asia Pacific
region, serving with distinction the semiconductor, data storage, electronics and biomedical industry
since 1982.
Our comprehensive range of products is designed to provide you with a convenient one-stop service,
meeting practically every industrial need of yours. You can rely on us for products and services that
are comprehensive in range, reliable in quality, accessible in location, and backed up by our many
years of experience and expertise.
Our manufacturing plants, located in Singapore, Malaysia (Senawang), and China (Suzhou), are
governed by consistent quality systems with ISO 9001:2008 and ISO 14001:2004 certifications.
Dou Yee Singapore
Dou Yee Malaysia
Stream of Products & Services
Electrostatic Discharge Control
Micro Contamination Control
Dry Packaging / Electronic Packaging Materials
Electronic Equipment and Tools
Bio Medical
Chemical for Electronics Industry
Personal Protective Equipment
Nano Composite Materials
Dou Yee Suzhou
More than 35 offices
Across 15 countries
Sales Office
Warehouse
Warehouse & Manufacturing
Sales Agent
HEAD OFFICE
Singapore
2304 Bedok Reservoir Road Bedok Industrial Park C Singapore 479223
Tel: (65) 6444 2678 | Fax: (65) 6743 7172 | Email: s3_marketing@douyee.com.sg
OVERSEAS OFFICES
MALAYSIA
Johor Bahru
Tel: (607) 556 6284 / 558 6285
Fax: (607) 556 6273
Email: jhbsales1@douyee.com.my
Malacca
Tel: (606) 231 5060/61/62/64
Fax: (606) 231 5059
Email: mlcsales@douyee.com.my
Kuala Lumpur
Tel: (603) 5121 1613 / 14
Fax: (603) 5121 8121
Email: dysales@douyee.com.my
Penang
Tel: (604) 390 4824
Fax: (604) 390 3815
Email: pngsales1@douyee.com.my
Ipoh
Tel: (605) 2911853
Fax: (604) 390 3815
Email: pngsales9@douyee.com.my
VIETNAM
Ho Chi Minh
Tel: (84) 8 3910 4420
Fax: (84) 8 3910 4419
Email: vnmsales1@douyee.com.sg
Hanoi
Tel: (844) 6275 4337
Fax: (844) 6275 4337
Email: vnmsales2@douyee.com.sg
INDONESIA
Jakarta
Tel: (6221) 8990 1153
Fax: (6221) 8990 5101
Email: ptdouyee@douyee.com.sg
HsinChu
Tel: (886) 3571 1618
Fax: (886) 3571 1619
Email: deamer.wu@douyee.com.tw
PHILIPPINES
Manila
Tel: (+632) 807 4683 / 84 / 85
Fax: (+632) 807 4682
Email: easy.cunanan@douyee.com.ph
Cebu
Tel: (6332) 341 1577 / 0147
Fax: (6332) 340 7686
Email: phsales3@douyee.com.ph
HONG KONG
Tel:+852-2480 6337
Fax:+852-2487 7956
Email: dyhk@douyee.com.hk
Shenzhen
Tel: +86-755-8389 0255
Fax: +86-755-8389 0675
Email: dysz@douyee.com.hk
Dongguan
Tel: +86-769-2280 6669 / 6671
Fax: +86-769-2280 6670
Email: dydgn@douyee.com.hk
THAILAND
Tel: (662) 529 0979
Fax: (662) 9081820
Email: mkt.thailand@douyee.co.th
KOREA
Tel: +82 10 26984161
Email: leeys@douyee.com.sg
CHINA
Shanghai
Tel: +86-21-5899 4619
Fax: +86-21-5899 4618
Email: dysh@douyee.com.cn
UNITED STATES
Truckee
Tel: (530) 320 1313
Fax: (530) 587 2951
Email: DYNorthAmerica@gmail.com
Suzhou
Tel: +86-512-6258 5066
Fax: +86-512-6258 5366
Email: ongcc@douyee.com.sg
FRANCE
Tournefeuille
Tel: +33 5 61 16 20 50
Fax: +33 5 34 57 51 30
Email: info.fr@douyee.fr
Beijing
Tel: +86-10-8368 6931
Fax: +86-10-8368 7651
Email: dybj@douyee.com.cn
Tianjin
Tel: +86-22-2642 2093
Fax: +86-22-2642 2023
Email: dytj@douyee.com.cn
Dalian
Tel: +86-411-8377 9121 / 9193
Fax: +86-411-8369 5216
Email: dydl@douyee.com.cn
Chengdu
Tel: +86-28-8501 7691
Fax: +86-28-8501 7693
Email: dycd@douyee.com.cn
Xi an
Tel: +86-29-8824 7085
Fax: +86-29-8824 7085
Email: dyxa@douyee.com.cn
Anhui
Tel: +86-21-5899 4619
Fax: +86-21-5899 4618
Email: dyah@douyee.com.cn
JAPAN
Yokohama
Tel: (8145) 312 9906
Fax: (8145) 312 9907
Email: mktg@douyee.co.jp
Pont de Poitte
Tel: +33 3 84 87 02 39
Fax: +33 3 84 48 30 00
Email: info.fr@eurostatgroup.com
SWEDEN
Tel: +46 (0) 155 20 26 80
Fax: +46 (0) 155 20 26 81
Email: info.se@eurostatgroup.com
NETHERLANDS
Tel: +31 (0) 570 502 950
Fax: +31 (0) 570 628 917
Email: info.nl@eurostatgroup.com
UNITED KINGDOM
Great Britain
Tel: +44 (0) 161 456 6088
Fax: +44 (0) 161 456 6089
Email: info.uk@eurostatgroup.com
POLAND
Tel: +48 533 550 338
Email: info.pl@eurostatgroup.com
HU-RO
Tel: +36 70 609 4216
Email: info.hu@eurostatgroup.com
SLOVAKIA
Tel: +421 908 581 747
Email: info.sk@eurostatgroup.com
GC201307EN_S3AARON-Rev 1
Batam
Tel: (011) 7 7061 2490
Fax: (011) 7 7061 2489
Email: btmsales3@douyee.com.sg
TAIWAN
Taipei
Tel: (886) 2 2715 1156
Fax: (886) 2 2712 8570
Email: deamer.wu@douyee.com.tw
Download PDF
Similar pages