T500e Brochure - Tennant Company

EQUIPMENT
C R E AT I N G A C L E A N E R , S A F E R , H E A LT H I E R W O R L D .
T500e
WA L K - B E H I N D F LO O R S C R U B B E R
 Exclusive Smart-Fill™ automatic battery watering system
 Reduce costs to clean, increase productivity, and simplify
operator training with the T500e’s innovative technologies
IMPROVE THE EFFECTIVENESS OF YOUR CLEANING
RESOURCES, INVESTMENTS, AND OPERATIONS WITH
A NEW SUITE OF TECHNOLOGIES
Reduce costs to clean, increase productivity, and simplify operator training
with the T500e’s suite of innovative technologies, such as optional ec-H2O
NanoClean® technology, IRIS® Asset Manager, or Smart-Fill™ automatic
battery watering.
Effectively remove floor finish without expensive stripping chemicals and
improve cleaning performance with the orbital cleaning head option, featuring
optimal down pressure and high RPMs.
Reduce risk of slips and falls with a redesigned squeegee and integrated p-trap
that improves water pick up and prevents water from dripping on the floor
after cleaning.
Reduce the risk of contact with dirty recovery water and decrease the need for
secondary cleaning operations caused from spills with optional flow control valve.
Charge batteries safely with the lid closed with on-board charger fan and
integrated venting.
Help prevent breakdowns and simplify preventative maintenance and training
requirements with yellow touch points.
INNOVATIV E, EX C LUS IV E T E C HN O LO G I E S
SMART-FILL™
AUTOMATIC BATTERY WATERING
Smart-Fill™ makes battery
maintenance safer by removing
the task of checking, opening, and
filling flooded batteries.
Increase productivity, reduce
cost to clean and make informed
decisions with intelligent insights
from IRIS® Asset Manager.
ec-H2O NanoClean® technology
electrically converts water into an
innovative cleaning solution that cleans
effectively, saves money, improves
safety, and reduces environmental
impact compared to daily cleaning floor
chemicals and methods.+
+ec-H2O NanoClean® technology is not suitable for all soils, including heavy concentrations of fats and oils. Depending on the type of soil, conventional chemical cleaners may be required.
T500e
INSIDE THE
Easily clean tanks to help
reduce mold, bacteria,
and other contaminants
Improve operator
ergonomics with
propel direction switch
and speed settings
within easy reach
Optional ec-H2O NanoClean® technology
helps minimize water consumption
Easily and ergonomically
lower and raise the foot
activated squeegee
Easily fill your machine with
an accessible port up front
Virtually eliminate water
drips after cleaning with
an integrated p-trap
Quickly and ergonomically install disk
pads and brushes with Insta-Fit™ and
gimbal mount heads
Orbital scrubbing is ideal for daily
cleaning or chemical-free floor
finish removal.
Optional Smart-Fill™ technology prevents operators from using
scrubbing functions on dry batteries and a control panel alert
notifies operators when the distilled water tank is low
TENNANTTRUE® PARTS, SERVICE
AND FINANCE SOLUTIONS

Reduce rework, labor and safety
costs by using only TennantTrue
parts and service.

Leverage the knowledge and
experience of over 450+ factory-direct
Tennant service representatives that
utilize only TennantTrue parts to ensure
optimal cleaning performance.

Select from a wide array of TennantTrue
service plans designed to meet your
cleaning equipment needs – whether
that includes peace of mind and budget
control, speed of response or uptime.

Simplify budgeting by bundling
TennantTrue service plans, including
parts, into the purchase or financing
of your machine.
T5 0 0e WA L K- B E HIN D F LO O R S C R U BBER
SCRUBBING SYSTEM
Productivity (per hour) Theoretical Max
Estimated Coverage* – Conventional
Estimated Coverage* – ec-H2O NanoClean®
26 IN / 650 MM
DUAL DISK
28 IN / 700 MM
32 IN / 800 MM
28,600 ft2/hr / 2,657 m2/hr 30,800 ft2/hr / 2,861m2/h 35,200 ft2/hr / 3,270 m2/hr
20,571 ft2/hr / 1,911 m2/hr 22,286 ft2/hr / 2,070 m2/h 25,714 ft2/hr / 2,389 m2/hr
23,124 ft2/hr / 2,148 m2/hr 23,680 ft2/hr / 2,200 m2/hr 27,323 ft2/hr / 2,538 m2/hr
CYLINDRICAL
28 IN / 700 MM
ORBITAL
28 IN / 710 MM
30,800 ft2/hr / 2,861 m2/h
22,286 ft2/hr / 2,070 m2/h
23,680 ft2/hr / 2,200 m2/hr
28,000 ft2/hr / 2,601 m2/hr
20,260 ft2/hr / 1,882 m2/hr
21,527 ft2/hr / 2,000 m2/hr
BRUSH DRIVE SYSTEM
Scrub motor
2x 24 VDC, 0.75 hp / 0.55 kW
Brush Pad RPM
220 rpm
Brush down pressure
Low:
65 lbs / 29.5 kg High: 120 lbs / 54.5 kg
2x 24 VDC, 0.75 hp / 0.55 kW
220 rpm
70 lbs / 32 kg
120 lbs / 54.5 kg
2x 24 VDC, 0.75 hp / 0.55 kW
220 rpm
75 lbs / 34 kg
120 lbs / 54.5 kg
2x 24 VDC, 0.63 hp / 0.47 kW
1500 rpm
85 lbs / 38.5 kg
120 lbs / 54.5 kg
24 VDC,
0.75 hp / 0.55 kW
2200 rpm
110 lbs / 50 kg
170 lbs / 77 kg
22.5 gal / 85 L
27 gal / 102 L
24 VDC, 0.46 hp / 0.34 kW
34 in / 864 mm
22.5 gal / 85 L
27 gal / 102 L
24 VDC, 0.46 hp / 0.34 kW
34 in / 864 mm
22.5 gal / 85 L
27 gal / 102 L
24 VDC, 0.46 hp / 0.34 kW
34 in / 864 mm
22.5 gal / 85 L
27 gal / 102 L
24 VDC,
0.46 hp / 0.34 kW
34 in / 864 mm
SOLUTION/RECOVERY SYSTEM
Solution tank capacity
Recovery tank capacity
Vacuum motor
Vacuum water lift
22.5 gal / 85 L
27 gal / 102 L
24 VDC, 0.46 hp / 0.34 kW
34 in / 864 mm
CLEANING TECHNOLOGY
ConventionalStandard
ec-H2O NanoClean
Optional
Standard
Optional
Standard
Optional
Standard
Optional
Standard
Optional
BATTERY SYSTEM
System Voltage Battery Types - 4 required
Wet 225AH
Wet 260AH
Sealed AGM 220A
Battery run time Wet 260AH (up-to hours)**
On-board or off-board charger
Smart-FillTM Automatic Battery Watering
Tank Capacity (Option)
24 volt
24 volt
24 volt
24 volt
24 volt
Standard
Optional
Optional
4.5
Standard
Standard
Optional
Optional
4.5
Standard
Standard
Optional
Optional
4.2
Standard
Standard
Optional
Optional
3.6
Standard
Standard
Optional
Optional
4
Standard
0.66 gal / 2.5 L
0.66 gal / 2.5 L
0.66 gal / 2.5 L
0.66 gal / 2.5 L
0.66 gal / 2.5 L
2.5 mph / 4.0 kph
2.7 mph / 4.3 kph
2.5 mph / 4.0 kph
2.7 mph / 4.3 kph
2.5 mph / 4.0 kph
2.7 mph / 4.3 kph
2.5 mph / 4.0 kph
2.7 mph / 4.3 kph
2.3 mph / 3.7 kph
2.7 mph / 4.3 kph
58.5 in / 1,486 mm
27.5 in / 700 mm
43.3 in / 1,100 mm
38.3 in / 973 mm
59 in / 1,499 mm
320 lbs / 145 kg
610 lbs / 277 kg
800 lbs / 363 kg
67.4 dBA
59.1 in / 1,501 mm
29.5 in / 750 mm
43.3 in / 1,100 mm
41.3 in / 1,049 mm
59.6 in / 1,514 mm
330 lbs / 150 kg
620 lbs / 281 kg
810 lbs / 367 kg
67.4 dBA
61.1 in / 1,552 mm
33.5 in / 850 mm
43.3 in / 1,100 mm
46.6 in / 1,234 mm
61.6 in / 1,565 mm
355 lbs / 161 kg
645 lbs / 293 kg
835 lbs / 379 kg
67.4 dBA
59.1 in / 1,501 mm
30.7 in / 780 mm
43.3 in / 1,100 mm
46.6 in / 1,234 mm
59.6 in / 1,514 mm
370 lbs / 168 kg
660 lbs / 299 kg
850 lbs / 386 kg
68.3 dBA
58.5 in / 1,486 mm
28.0 in / 710 mm
43.3 in / 1,100 mm
41.3 in / 1,049 mm
59 in / 1,499 mm
370 lbs / 168 kg
660 lbs / 299 kg
850 lbs / 386 kg
66.9 dBA
PROPELLING SYSTEM
Scrubbing speed
Transport speed
MACHINE SPECIFICATIONS
Length
Width
Height
Squeegee width
Aisle turnaround width
Weight (without batteries)
Weight (with batteries)
GVW
Sound level (operator’s ear)***
WARRANTY
See your local representative for warranty information
* Estimated coverage rates use the practical speed and empty/fill time standards from the 2004 ISSA Cleaning Times handbook.
** Up to run-times are based on continuous scrubbing run-times, 260AH batteries, low down pressure, ec-H2O off.
*** Sound levels per ISO 11201 as recommended by the American Association of Cleaning Equipment manufacturers & OSHA.
Specifications subject to change without notice.
ec-H2O NanoClean® technology is NFSI
(National Floor Safety Institute) Certified
ec-H2O NanoClean technology is
registered by NSF International
SEEING IS BELIEVING
For a demonstration or additional information,
call +1.800.553.8033 or email info@tennantco.com
1.066.002.am.en
T500e Brochure
1/17
©2017 The Tennant Company logo and other trademarks designated with the
symbol “®” are trademarks of Tennant Company registered in the United States
and/or other countries. Tennant Company’s products are sold and serviced
through subsidiaries of Tennant Company and distributors. All rights reserved.
Tennant
701 North Lilac Drive
Minneapolis, MN 55422 USA
USA/Canada: +1.800.553.8033
Quebec: +1.800.361.9050
Overseas: +1.763.540.1315
www.tennantco.com
info@tennantco.com
Download PDF
Similar pages