KU-BAND VSAT TRANSCEIVER SERIES
40 and 50 Watts
Ku 40-50
AnaSat® 40Ku
GENERAL DESCRIPTION
BUILT IN TEST EQUIPMENT
AnaCom’s Ku-Band VSAT transceivers integrate all necessary
functions into a small, highly integrated out-door package
which provides excellent reliability in a wide range of environments and functions.The up converter, down converter,
power amplifier, monitor and control and power supply
are included in a single enclosure and the only cabling
required to the indoor equipment are the IF cables. The
LNC connects to the transceiver with a single coaxial cable.
To improve and simplify maintenance routines, an external
terminal (or computer) can be connected to monitor a
number of critical parameters without use of additional
test equipment.These include:
An ovenized, high stability crystal oscillator is used to lock
the TX and RX synthesizers.The onboard microprocessor is
used to give additional temperature and aging compensation. These transceivers are ruggedly built for continuous
outdoor duty in all types of environments. They are especially suitable for SCPC, MCPC, and DAMA applications.
■
■
■
■
■
■
■
■
■
No indoor equipment is needed
Built in test facilities for improved maintainability and
reduced dependence on external test equipment
Frequency agile radio equipment. Completely independent TX and RX frequency selection
Superior phase noise
Flexible and universal power supply
FLEXIBLE APPLICATIONS
■
Data distribution and collection
■ Rural telecommunications
■ Industrial networking
■ LAN and WAN extensions
■ Emergency link restoration
■ Remote surveillance
■ Broadcast
■ Conventional voice traffic
■ Point-of-Sales systems
■ Video teleconferencing
Transmitter power output level
TX/RX IF input level
Power supply voltages
TX/RX synthesizer loop voltages
Internal Temperature
Alarm Details
CONTROLLABLE FUNCTIONS FROM THE TERMINAL
■
■
FEATURES
■
■
TX frequency and gain (ON / OFF feature)
RX frequency and gain (independent from TX)
COMPREHENSIVE MONITOR & CONTROL
This powerful feature allows you to monitor and control
the transceiver on the same M&C bus with most indoor
equipment such as modems and multiplexers.The Monitor
& Control system can be used in combination with the
unit’s internal metering function to monitor operational
parameters.
BENEFITS
■
■
■
■
■
A family of products with significant commonality
minimizes demands for spares and training
“Last Touch” controls allow for remote configuration or
local (manual) configuration
Flash memory means that the transceiver always powers
up with exactly the same operating conditions as when
it lost power (or was turned off)
Comprehensive maintenance features for operational
effectiveness and minimum outages
Simple installation
an evolution in communication
RECEIVER (W/LNC) CHARACTERISTICS
TRANSMIT CHARACTERISTICS
ANASAT®
KU
1 dB COMPRESSION POINT
TX GAIN
TX GAIN ADJUSTMENT RANGE
TX LEVEL FLATNESS
TX GAIN STABILITY
TX INPUT IF FREQUENCY
TX INPUT IF IMPEDANCE
TX INPUT IF LEVEL
TX OUTPUT FREQUENCY
TX FREQUENCY STEP SIZE
TX PHASE NOISE
TX LINEARITY
TX INSTANTANEOUS BANDWIDTH
RX
RX
RX
RX
RX
RX
RX
RX
RX
INPUT FREQUENCY
FREQUENCY STEP SIZE
OUTPUT FREQUENCY
INSTANTANEOUS BANDWIDTH
GAIN
GAIN VARIATION
NOISE FIGURE
LINEARITY
PHASE NOISE
RX OUTPUT IMPEDANCE
SYSTEM
PORTS
PROTOCOL
ALARM RELAYS
VISUAL INDICATORS
OTHER
ENVIRONMENTAL
POWER
TEMPERATURE
ALTITUDE
RAIN
WIND
VIBRATION
SHOCK
REUSABLE CUSTOM DESIGNED PACKAGING
TYPICAL POWER CONSUMPTION
PRIME POWER RECOMMENDATION
WEIGHT
TRANSCEIVER SIZE — 40W, 50W
LNC SIZE / WEIGHT
SPECIFICATIONS
40 WATTS
46 dBm
79 dB
+6 to -20 dB M&C controlled
±1.5 dB / 36 MHz
±1.5 dB over temperature and frequency
52 to 88 MHz (optional 140 MHz)
50 ohms (75 ohms optional)
-30 dBm ±10 dB (+20 dBm MAX)
14.0 to 14.50 GHz
1 MHz M&C controlled
100 Hz: -60 dBc, 1 KHz:
-70 dBc
10 KHz: -80 dBc, 100 KHz: -90 dBc
-30 dBc (2 carriers @ 9 dB back-off )
±18 MHz
50 WATTS
47 dBm
80 dB
10.95 – 12.75 GHz
1 MHz M & C controlled
52 to 88 MHz
±18 MHz
85 to 100 dB M&C controlled
±1.5 dB over temperature and frequency
1.9 dB (160°K), 1.4 dB (110°K) Optional
-35 dBc intermod, MAX
100 Hz: -60 dBc, 1 KHz:
-70 dBc
10 KHz: -80 dBc, 100 KHz: -90 dBc
50 ohms (75 ohms optional)
1 RS-232, and 1 RS-485/RS-232 configurable
RS-232 port supports any “dumb terminal” or ASCII interface
RS-485 port supports addressed packetized data per
ANACOM Supervisor™ software specifications
FORM C for MAJOR and MINOR alarms; isolated
GREEN LED (flashing) indicates power is active
RED LED indicates a summary alarm
100 to 242 VAC; 47 to 63 Hz
-40 to +50°C operational
-60 to +75°C storage
15,000 ft (5,000 meters) MAX
20 inches per hour
150 miles per hour
1.0 g random operational, 2.5 g random survival
10 g operational, 40 g survival
Exceeds 1 meter 10 point drop method
767VA
910VA
1690VA
2000VA
67 lbs
67 lbs
(30.5 kg)
(30.5 kg)
21.6" x 13" x 13.6" (549 x 330 x 353 mm)
8.4" x 2.9" x 1.8" (213 x 74 x 46 mm) / 1.75 lbs (0.80 kg) max.
© April 2005 AnaCom, Inc. All Rights Reserved. All specifications subject to change.
Servsat Communications, Inc., Atlanta USA
Phone 770.757.1767 ■ Fax 770.754.4547
www.servsat.com ■ sales@servsat.com
31785
Download PDF
Similar pages