1/4” Guitar / Mic input
Important Safety Instructions
1) Read these instructions – All the safety and operating instructions should be read before this
product is operated.
2) Keep these instructions – The safety and operating instructions should be retained for future
reference.
3) Heed all warnings - All warnings on the appliance and in the operating instructions should
be adhered to.
4) Follow all instructions – All operating and use instructions should be followed.
5) This apparatus can be used in wet location conditions after disconnected the AC Mains supply
and closing the water proof cap for the AC inlet. It must not be used in wet location conditions
when charging. Do not use this apparatus near water-The appliance should not be used near
water or moisture – for example, in wet basement or near a swimming pool.
6) Clean only with dry cloth.
7) Do not block any ventilation openings, install in accordance with the manufacturer’s instructions.
8) Do not install near any heat sources such as radiations, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
9) Do not defeat the safety purpose of the polarized or grounding plug. A polarized plug has two
blades with one wider than the other. A grounding plug has two blades and a third grounding
prong. The wide blade or the third prong is provided for your safety. If the provided plug does
not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10) Protected the power cord from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.
11) Only use attachments/accessories specified by the manufacturer.
12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold
with the apparatus. When a cart or rack is used, use caution when moving the cart/apparatus
combination to avoid injury from tip-over.
13) Unplug this apparatus during lighting storms or when unused for long periods of time.
14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus
has been damaged in any way, such as power-supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or has been dropped.
15) Mains plug is used as the disconnect device, the disconnect device shall remain readily
operable.
16) Do not install this equipment in a confined or building-in space such as a book case or
similar unit, and remain a well ventilation conditions at open site. The ventilation should not
be impeded by covering the ventilation openings with items, such as newspapers, table-cloth,
curtains, etc.
17) No naked flame sources, such as lighted candles, should be placed on the apparatus.
18) Attention should be drawn to the environmental aspects of battery disposal.
19) The use of apparatus in moderate climate.
20) The apparatus shall not be exposed to dripping or splashing and that no objects filled with
liquids, such as vases, shall be placed on the apparatus.
WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain
or moisture.
WARNING: The batteries shall not be exposed to excessive heat such as sunshine, fire or
the like.
CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same
or equivalent type.
Protective earthing terminal. The apparatus should be connected to a mains socket outlet
with a protective earthing connection.
TRUE WIRELESS SYSTEM (TWS) Additional speaker sold separately
True Wireless System (also known as TWS) is a feature that allows one device to wirelessly connect with
another device. As a brand-new feature for the Rockin’ Roller 3, you can use the TWS function to connect it to
a second Rockin’ Roller 3 and play your music through two speakers at once!t
• Make sure the speaker is in Bluetooth mode and
connect to a device.
• Press the TWS button to activate the speaker’s
True Wireless System
(RED LED indicator will flash in TWS mode)
• On a second speaker (NOT connected to a
TWS
Bluetooth device), press the TWS button.
• When speakers connect, the RED LED indicator will stop flashing and remain on.
• To disconnect a speaker, press the TWS button.
Line Out Feature
Connect additional speakers via 3.5 mm cable. (additional speakers sold separately)
Antenna use only for NOAA operations, NOAA always active in background.
To disable NOAA Feature push volume knob until led displays “NOFF”
20. NOAA antenna
(
)
FCC ID:2AAINYS1349
3018049
Rating Current:7A
840W(COMBINED)
(
)
FCC ID:2AAINYS1349
3018049
Rating Current:7A
840W(COMBINED)
1/4” GUITAR / MIC INPUT
Guitar not included
• Plug in the 1/4” audio jack plug in the MIC input for Microphone, GUITAR input for guitar,
the unit will enter into that mode (MIC / GUITAR), make sure the the Microphone, Guitar, or
other device is on.
• You can connect any audio device that has 1/4” audio
output jack, and can playback and audio from this
connected device.
• Playback functions (Play, Pause, Next, Previous) can
be controlled from the connected Audio device.
• Guitar not included
USB CHARGING
CHARGING
USB
voltage 5V/2.1A
Disable NOAA Feature
• Push volume knob until led displays “NOFF”
Customize your
listening experience
with 6 EQ settings when
in Bluetooth or AUX mode.
100W
32 F° - 95 F°
“ON”
“OFF”
Press to change between “BT”, “AUX IN”, “FM” or “NOAA”
4.0
3.5mm AUX Out
x2 (5v Parallel 2.1A)
1/4” Line in
Download PDF
Similar pages