Hundertausende zufriedene NOVA Anwender in mehr als 70 Ländern weltweit.
Hundreds of thousands of satisfied NOVA users in more than 70 countries worldwide.
About NOVA
PREMIUM CINEMA SOUND
Kinosound der Spitzenklasse.
Werk Pocking (Deutschland) / Factory in Pocking (Germany)
Die Zukunft im Kinosound. | The future of cinema sound.
Kinobesucher haben heutzutage deutlich höhere Ansprüche an Bild und Ton
im Kino als noch vor wenigen Jahren. Ein einfaches Lautsprechersystem
reicht längst nicht mehr aus, um die Kinogänger wirklich zu begeistern.
Digitales Kino bietet jedem Filmtheater die Möglichkeit, erstklassig
dynamischen und aufregenden Sound in den Kinosaal zu bringen.
Today’s moviegoers have much higher demands and expectations when it
comes to cinema footage and sound. The sound technology behind today’s
movies means a simple speaker system cannot engage the audiences
senses and inspire moviegoers to return. Digital cinema offers every movie
theater the opportunity to bring first class dynamics and clarity that
transports the viewer in to the movie.
Um dieses enorme Potential freizusetzen, ist ein Soundsystem erforderlich,
das die Soundtracks des 21. Jahrhunderts in voller Übertragungsqualität
„State-of-the-ar t“ wiedergeben kann. Höchste Performance, maximale
Dynamik und Auflösung der Spitzenklasse - NOVA Kinosysteme sind
gemacht für ein aufregendes und perfektes Kinoerlebnis. Und um
Kinogänger immer wieder aufs Neue zu überraschen.
To realise this enormous potential, a cinema sound system must be able to
reproduce the "state-of-the-art" soundtracks of the 21st century in full
broadcast quality. Optimum performance, maximum dynamics and
resolution of the highest class - NOVA cinema systems are designed to
provide an exciting cinema experience surprising moviegoers over and
over again.
Führende Line-Array Technologien, Lautsprecher für modernste Mehrkanalanwendungen, 3D-Sound und komplette Systemlösungen: NOVA Soundsysteme bieten Kinobetreibern die Möglichkeit, auch in Zukunft konkurrenzfähig zu bleiben.
Leading line array technology, speakers for advanced multi-channel
applications, 3D sound and complete system solutions: NOVA sound
systems offer cinema operators the ability to remain competitive in the future.
NOVA - die Zukunft des digitalen Kinosounds.
NOVA - the future of digital cinema sound.
3
Front Systems
PREMIUM FRONT SYSTEMS
High performance front systems for crystal-clear sound
and maximum dynamics.
NCS 115 Q
NCS 215
NCS 115 FLAT
15", two-way
15", two-way
2 x 15", two-way
15", two-way
Frequency Range:
45 Hz - 20 kHz
44 Hz - 20 kHz
38 Hz - 20 kHz
42 Hz - 20 kHz
Coverage Pattern:
90° x 60° (H x V)
90° x 60° (H x V)
90° x 60° (H x V)
90° x 60° (H x V)
PVC
Fibre glass
Fibre glass
Fibre glass
Crossover Modes:
Passive
Active & passive version
Active & passive version
Passive
Crossover Frequency:
1.6 kHz
1.05 kHz
1.05 kHz
1.25 kHz
500 W / 700 W
600 W / 1.200 W
1.200 W / 2.400 W
600 W / 1.200 W
128 dB SPL peak
131 dB SPL peak
137 dB SPL peak
130 dB SPL peak
99 dB SPL
100 dB SPL
103 dB SPL
99 dB SPL
1 x NOVA 15/500
1 x NOVA 15/600C
2 x NOVA 15/600C
1 x NOVA 15/600C
8 ohms
8 ohms
4 ohms
8 ohms
1 x NOVA HT400, 1.35“ voice coil driver
1 x NOVA C1500, 3“ voice coil driver
1 x NOVA C1500, 3“ voice coil driver
1 x NOVA C1000, 1.75“ voice coil driver
8 ohms
8 ohms
8 ohms
8 ohms
16 mm, ProWo© MDF
16 mm, ProWo© MDF
16 mm, ProWo© MDF
16 mm, ProWo© MDF
Black lacquer finish
Black lacquer finish
Black lacquer finish
Black lacquer finish
Binding Posts
Binding Posts
Binding Posts
Binding Posts
450 mm x 775 mm x 185 mm
680 mm x 725.5 mm x 450 mm
680 mm x 1265 mm x 450 mm
680 mm x 1252.5 mm x 260 mm
16.5 kg
Passive: 38 kg / Active: 37 kg
Passive: 61 kg / Active: 60 kg
Passive: 42 kg / Active: 41 kg
System Type:
HF Horn:
Power Rating (Cont. / Program):
Maximum SPL:
System Sensitivity (1w/1m):
LF Driver
LF Nominal Impedance:
HF Driver:
HF Nominal Impedance:
Enclosure:
Finish:
Input Connectors:
Dimensions (W x H x D):
Net Weight:
4
NCS 115 MICRO
System Type:
NCS 115 Q-AS
NCS 215 Q-AS
15", two-way
2 x 15", two-way
Frequency Range:
44 Hz - 20 kHz
38 Hz - 20 kHz
Coverage Pattern:
90° x 60°/90° (H x V), 20° up / 40° down
90° x 60°/90° (H x V), 20° up / 40° down
Fibre glass
Fibre glass
Active
Active
1.05 kHz
1.05 kHz
Power Rating (Cont. / Program):
600 W / 1.200 W
1.200 W / 2.400 W
Maximum SPL:
131 dB SPL peak
137 dB SPL peak
100 dB SPL
103 dB SPL
1 x NOVA 15/600C
2 x NOVA 15/600C
8 ohms
4 ohms
1 x NOVA C1500, 3“ voice coil driver
1 x NOVA C1500, 3“ voice coil driver
8 ohms
8 ohms
16 mm, ProWo© MDF
16 mm, ProWo© MDF
Black lacquer finish
Black lacquer finish
Binding Posts
Binding Posts
680 mm x 900 mm x 450 mm
680 mm x 1.400 mm x 450 mm
39 kg
62 kg
HF Horn:
Crossover Modes:
Crossover Frequency:
System Sensitivity (1w/1m):
LF Driver
LF Nominal Impedance:
HF Driver:
HF Nominal Impedance:
Enclosure:
Finish:
Input Connectors:
Dimensions (W x H x D):
Net Weight:
5
Line Array
LINE ARRAY SYSTEMS
High performance line array loudspeakers for highest demands.
Modular systems for large cinema halls without compromise.
System Type:
NCS L33 C/90°
3 x 6", two-way line rray
3 x 6", two-way line rray
Frequency Range:
80 Hz - 20 kHz
80 Hz - 20 kHz
Coverage Pattern:
60° x 15° (H x V)
90° x 36° (H x V)
HF Horn:
Hybrid fibre glass
Hybrid fibre glass
Passive
Passive
1.25 kHz
1.25 kHz
450 W / 900 W
450 W / 900 W
132 dB SPL peak
132 dB SPL peak
103 dB SPL
103 dB SPL
Crossover Modes:
Crossover Frequency:
Power Rating (Cont. / Program):
Maximum SPL:
System Sensitivity (1w/1m):
LF Driver
LF Nominal Impedance:
HF Driver:
HF Nominal Impedance:
Enclosure:
Finish:
Input Connectors:
Dimensions (W x H x D):
Net Weight:
Accessories:
6
NCS L33 F/60°
3 x NOVA 6/150C
3 x NOVA 6/150C
3.2 ohms
3.2 ohms
3 x NOVA C1000, 1.75“ voice coil driver
3 x NOVA C1000, 1.75“ voice coil driver
3.2 ohms
3.2 ohms
16 mm, ProWo© MDF
16 mm, ProWo© MDF
Black lacquer finish
Black lacquer finish
Binding Posts
Binding Posts
376 mm x 530 mm x 365 mm
376 mm x 530 mm x 365 mm
25 kg
25 kg
# 00507: NCS-S stacking adapter
# 00507: NCS-S stacking adapter
# 00519: NCS-CFS 33 U-bracket
# 00519: NCS-CFS 33 U-bracket
System Type:
NCS L63 F/60°
NCS L63 C/90°
6 x 6", two-way line rray
6 x 6", two-way line rray
Frequency Range:
70 Hz - 20 kHz
70 Hz - 20 kHz
Coverage Pattern:
60° x 15° (H x V)
90° x 36° (H x V)
HF Horn:
Hybrid fibre glass
Hybrid fibre glass
Passive
Passive
1.25 kHz
1.25 kHz
Power Rating (Cont. / Program):
900 W / 1.800 W
900 W / 1.800 W
Maximum SPL:
137 dB SPL peak
137 dB SPL peak
106 dB SPL
106 dB SPL
6 x NOVA 6/150C
6 x NOVA 6/150C
5.4 ohms
5.4 ohms
3 x NOVA C1000, 1.75“ voice coil driver
3 x NOVA C1000, 1.75“ voice coil driver
5.4 ohms
5.4 ohms
16 mm, ProWo© MDF
16 mm, ProWo© MDF
Black lacquer finish
Black lacquer finish
Binding Posts
Binding Posts
546 mm x 530 mm x 365 mm
546 mm x 530 mm x 365 mm
35 kg
35 kg
# 00507: NCS-S stacking adapter
# 00507: NCS-S stacking adapter
# 00520: NCS-CFS 63 U-bracket
# 00520: NCS-CFS 63 U-bracket
Crossover Modes:
Crossover Frequency:
System Sensitivity (1w/1m):
LF Driver
LF Nominal Impedance:
HF Driver:
HF Nominal Impedance:
Enclosure:
Finish:
Input Connectors:
Dimensions (W x H x D):
Net Weight:
Accessories:
7
Line Array
LINE ARRAY SYSTEMS
Premium line array systems and subwoofers for
medium and large cinema halls.
C-LINE 33
C-LINE 33 / 2
C-LINE 33 PLUS
1 x NCS L33 C/90°
1 x NCS L33 C/90°
1 x NCS L33 F/60°
450 W (RMS)
450 W (RMS)
1 x NCS 115 Q B
1 x NCS 215 B
600 W (RMS)
1.200 W (RMS)
450 W (RMS)
1 x NCS L33 C/90°
450 W (RMS)
1 x NCS 215 B
Accessories
1.200 W (RMS)
8
FP-2
NCS-S
CCS-SET
NCS-CFS 33
flexible stacking adapter
straight stacking adapter
set of four flexible feet
fly- / stacking frame
(included in delivery as standard)
C-LINE 63
C-LINE 63 PLUS
C-LINE 63 XTRA
1 x NCS L63 C/90°
1 x NCS L63 F/60°
1 x NCS L63 F/60°
900 W (RMS)
900 W (RMS)
900 W (RMS)
1 x NCS L63 C/90°
1 x NCS L63 C/90°
1 x NCS 215 B
1.200 W (RMS)
900 W (RMS)
1 x NCS 215 B
Accessories
1.200 W (RMS)
900 W (RMS)
2 x NCS 215 B
2.400 W (RMS)
NCS-CFS 63
fly- / stacking frame
9
Subwoofers
SUBWOOFERS
High performance subwoofers for
impressive and deep sound reproduction.
NCS 115 B-MICRO NCS 115 QB
CPA 118 C
System Type:
15", subwoofer
15", subwoofer
2 x 15", subwoofer
18", subwoofer, triangular design
Frequency Range:
45 Hz - 1.6 kHz
44 Hz - 1.6 kHz
38 Hz - 1.2 kHz
Freefield: 38 Hz - 1 kHz / Corner: 22 Hz - 1 kHz
Coverage Pattern:
n/a
n/a
n/a
n/a
HF Horn:
n/a
n/a
n/a
n/a
Crossover Modes:
n/a
n/a
n/a
n/a
Crossover Frequency:
n/a
n/a
n/a
n/a
500 W / 700 W
600 W / 1.200 W
1.200 W / 2.400 W
800 W / 1.600 W
127 dB SPL peak
130 dB SPL peak
137 dB SPL peak
130 dB SPL peak
99 dB SPL
99 dB SPL
103 dB SPL
98 dB SPL
1 x NOVA 15/500
1 x NOVA 15/600C
2 x NOVA 15/600C
1 x NOVA 18/1000EL
8 ohms
8 ohms
4 ohms
8 ohms
HF Driver:
n/a
n/a
n/a
n/a
HF Nominal Impedance:
n/a
n/a
n/a
n/a
16 mm, ProWo© MDF
16 mm, ProWo© MDF
16 mm, ProWo© MDF
16 mm, ProWo© MDF
Black lacquer finish
Black lacquer finish
Black lacquer finish
Black lacquer finish
Binding Posts
Binding Posts
Binding Posts
Binding Posts
450 mm x 600 mm x 185 mm
450 mm x 500 mm x 185 mm
680 mm x 1265 mm x 450 mm
618 mm x 700 mm x 315 mm
14 kg
28 kg
51 kg
29 kg (including mounting frame)
Power Rating (Cont. / Program):
Maximum SPL:
System Sensitivity (1w/1m):
LF Driver
LF Nominal Impedance:
Enclosure:
Finish:
Input Connectors:
Dimensions (W x H x D):
Net Weight:
10
NCS 215 B
NCS 118 SB
NCS 118 B FLAT
NCS 121 SB
System Type:
18", subwoofer
18", subwoofer
21", subwoofer
Frequency Range:
22 Hz - 300 Hz
28 Hz - 300 Hz
18 Hz - 160 Hz
Coverage Pattern:
n/a
n/a
n/a
HF Horn:
n/a
n/a
n/a
Crossover Modes:
n/a
n/a
n/a
70 - 120 Hz (recommended)
n/a
n/a
Power Rating (Cont. / Program):
800 W / 1.600 W
800 W / 1.600 W
1.200 W / 2.400 W
Maximum SPL:
130 dB SPL peak
130 dB SPL peak
135 dB SPL peak
99 dB SPL
99 dB SPL
101 dB SPL
1 x NOVA 18/800C
1 x NOVA 18/800C
1 x NOVA 21/1200C
8 ohms
8 ohms
8 ohms
HF Driver:
n/a
n/a
n/a
HF Nominal Impedance:
n/a
n/a
n/a
16 mm, ProWo© MDF
16 mm, ProWo© MDF
16 mm, ProWo© MDF
Black lacquer finish
Black lacquer finish
Black lacquer finish
Binding Posts
Binding Posts
Binding Posts
680 mm x 1.000 mm x 450 mm
680 mm x 1.000 mm x 260 mm
680 mm x 1.000 mm x 450 mm
50 kg
40 kg
60 kg
Crossover Frequency:
System Sensitivity (1w/1m):
LF Driver
LF Nominal Impedance:
Enclosure:
Finish:
Input Connectors:
Dimensions (W x H x D):
Net Weight:
11
Surround
SURROUND SPEAKERS
Discreet and powerful surround speakers
for perfect 3-D feeling.
CP 10E
CP 8N
CP 10N
8", two-way
10", two-way
8", two-way
10", two-way
Frequency Range:
60 Hz - 20 kHz
55 Hz - 20 kHz
60 Hz - 20 kHz
55 Hz - 20 kHz
Coverage Pattern:
90° x 60° (H x V)
90° x 60° (H x V)
90° x 60° (H x V)
90° x 60° (H x V)
PVC
PVC
PVC
PVC
Crossover Modes:
Passive
Passive
Passive
Passive
Crossover Frequency:
2.2 kHz
2.2 kHz
2.0 kHz
2.0 kHz
150 W / 300 W
250 W / 500 W
200 W / 400 W
300 W / 600 W
120 dB SPL peak
122 dB SPL peak
122 dB SPL peak
125 dB SPL peak
95 dB SPL
95 dB SPL
96 dB SPL
97 dB SPL
1 x NOVA 8/150
1 x NOVA 10/250
1 x NOVA 8/200
1 x NOVA 10/300
8 ohms
8 ohms
8 ohms
8 ohms
System Type:
HF Horn:
Power Rating (Cont. / Program):
Maximum SPL:
System Sensitivity (1w/1m):
LF Driver
LF Nominal Impedance:
HF Driver:
HF Nominal Impedance:
Enclosure:
Finish:
Input Connectors:
Dimensions (W x H x D):
Net Weight:
12
CP 8E
1 x NOVA HT250, 1“ voice coil driver
1 x NOVA HT250, 1“ voice coil driver
1 x NOVA HT400, 1.35“ voice coil driver
1 x NOVA HT400, 1.35“ voice coil driver
8 ohms
8 ohms
8 ohms
8 ohms
16 mm, ProWo© MDF
16 mm, ProWo© MDF
16 mm, ProWo© MDF
16 mm, ProWo© MDF
Black lacquer finish
Black lacquer finish
Black lacquer finish
Black lacquer finish
Binding Posts
Binding Posts
Binding Posts
Binding Posts
300 mm x 390 mm x 243 mm
330 mm x 438 mm x 255 mm
340 mm x 427 mm x 271 mm
380 mm x 475 mm x 284 mm
9 kg
11 kg
10.5 kg
13 kg
System Type:
CP 12N
CP 15N
12", two-way
15", two-way
Frequency Range:
50 Hz - 20 kHz
45 Hz - 20 kHz
Coverage Pattern:
90° x 60° (H x V)
90° x 60° (H x V)
PVC
PVC
Crossover Modes:
Passive
Passive
Crossover Frequency:
1.8 kHz
1.6 kHz
400 W / 800 W
500 W / 1.000 W
127 dB SPL peak
129 dB SPL peak
98 dB SPL
99 dB SPL
1 x NOVA 12/400
1 x NOVA 15/500
8 ohms
8 ohms
1 x NOVA HT400, 1.35“ voice coil driver
1 x NOVA HT400, 1.35“ voice coil driver
8 ohms
8 ohms
16 mm, ProWo© MDF
16 mm, ProWo© MDF
Black lacquer finish
Black lacquer finish
Binding Posts
Binding Posts
410 mm x 533 mm x 310 mm
680 mm x 450 mm x 306 mm
14.5 kg
18 kg
HF Horn:
Power Rating (Cont. / Program):
Maximum SPL:
System Sensitivity (1w/1m):
LF Driver
LF Nominal Impedance:
HF Driver:
HF Nominal Impedance:
Enclosure:
Finish:
Input Connectors:
Dimensions (W x H x D):
Net Weight:
13
Multi Channel
MULTI CHANNEL SPEAKERS
Coaxial speakers with sound in studio-monitor quality, delivering
top performance. Ready for modern 3D-sound applications.
CPA 8
CPA 10
CPA 12
5", two-way, coaxial
8", two-way, coaxial
10", two-way
12", two-way
Frequency Range:
85 Hz - 20 kHz
55 Hz - 20 kHz
60 Hz - 20 kHz
50 Hz - 20 kHz
Coverage Pattern:
90° x 90° (H x V)
90° x 90° (H x V)
90° x 90° (H x V)
90° x 90° (H x V)
Axisymmetric
Axisymmetric
Axisymmetric
Axisymmetric
Crossover Modes:
Passive
Passive
Passive
Passive
Crossover Frequency:
2.2 kHz
1.8 kHz
1.6 kHz
1.45 kHz
150 W / 300 W
250 W / 500 W
350 W / 700 W
450 W / 900 W
117 dB SPL peak
123 dB SPL peak
128.5 dB SPL peak
131 dB SPL peak
92 dB SPL
96 dB SPL
97 dB SPL
98.5 dB SPL
1 x NOVA 5/150 COAX, 1.8" voice coil
1 x NOVA 8/250 COAX, 2" voice coil
1 x NOVA 10/350 COAX, 2.5" voice coil
1 x NOVA 12/450 COAX, 3" voice coil
8 ohms
8 ohms
8 ohms
8 ohms
System Type:
HF Horn:
Power Rating (Cont. / Program):
Maximum SPL:
System Sensitivity (1w/1m):
LF Driver
LF Nominal Impedance:
HF Driver:
HF Nominal Impedance:
Enclosure:
Finish:
Input Connectors:
Dimensions (W x H x D):
Net Weight:
Accessories:
14
CPA 5
1 x NOVA 5/150 COAX, 1.35" voice coil
1 x NOVA 8/250 COAX, 1.75" voice coil
1 x NOVA 10/350 COAX, 1.75" voice coil
1 x NOVA 12/450 COAX, 1.75" voice coil
8 ohms
8 ohms
8 ohms
8 ohms
16 mm, ProWo© MDF
16 mm, ProWo© MDF
16 mm, ProWo© MDF
16 mm, ProWo© MDF
Black lacquer finish
Black lacquer finish
Black lacquer finish
Black lacquer finish
Binding Posts
Binding Posts
Binding Posts
Binding Posts
160 mm x 160 mm x 180 mm
250 mm x 250 mm x 250 mm
300 mm x 300 mm x 300 mm
360 mm x 360 mm x 360 mm
3 kg
9 kg
14 kg
18.5 kg
U-bracket, included in
U-bracket, included in
U-bracket, included in
U-bracket, included in
delivery as standard
delivery as standard
delivery as standard
delivery as standard
C-LINE 33/2 Application:
Medium Cinema Theater, Stacked Version
0
0
0
0
0
0
X 2000
NCS 215 B
0
0
NCS 215 B
0
0
X 2000
X 2000
DC 8000
L C R
0
0
SUB
CINEMA PROCESSOR
0
0
0
0
NCS 215 B
X 2000
NCS 118 SB
NCS 118 SB
15
Line Array
C-LINE 63 PLUS Application:
NCS L63 F/60°
X 2000
DC 8000
L C R
NCS 118 SB
16
0
0
0
0
0
0
0
0
CINEMA PROCESSOR
X 2000
X 2000
NCS 118 SB
0
0
0
0
0
0
0
0
0
0
0
0
X 2000
SUB
0
0
X 2000
X 2000
X 2000
0
0
X 2000
NCS 215 B
0
0
0
0
NCS 215 B
0
0
0
0
NCS 215 B
NCS L63 C/90°
NCS L63 F/60°
NCS L63 C/90°
NCS L63 C/90°
NCS L63 F/60°
Medium/Large Cinema Theater, Stacked Version
NCS 118 SB
NCS 118 SB
C-LINE 63 XTRA Application:
X 2000
NCS L63 F/60°
X 2000
X 2000
DC 4000
X 2000
0
0
0
0
0
0
0
0
0
0
0
0
DC 4000
DC 4000
X 2000
SUB
NCS 215 B
0
0
NCS 215 B
0
0
NCS 215 B
0
0
0
0
NCS 215 B
0
0
NCS 215 B
0
0
NCS 215 B
NCS L63 C/90°
NCS L63 F/60°
NCS L63 C/90°
NCS L63 C/90°
NCS L63 F/60°
Large Cinema Theater, Stacked Version
X 2000
L C R
X 2000
X 2000
X 2000
X 2000
BRIDGE MODE
BRIDGE MODE
BRIDGE MODE
BRIDGE MODE
NCS 121 SB
NCS 121 SB
NCS 121 SB
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
CINEMA PROCESSOR
NCS 121 SB
17
Controllers
18
Der DC8000 ist ein digitaler 4- in 8-Wege Systemcontroller mit einer
internen Auflösung von 32 Bit und 96 kHz Sampling Rate in den Eingängen
sowie in den Ausgängen.
The DC8000 is a digital 4-in / 8-out speaker management matrix system
with an internal resolution of 32 bit and 96 kHz sampling rate.
Der DC8000 verfügt über 4 analoge und digitale (AES/EBU© Format)
Eingänge. Die 8 Ausgänge geben ein analoge Signale aus. Der DC8000
verfügt über eine Remoteschnittstelle im RS485 Format. Durch den Einsatz
moderner DSPs beträgt die Latenzzeit (analog zu analog) nur 0,625 ms.
Jeder Eingang bietet 8 Equalizer (Low-Shelf, High-Shelf und Parametric EQ),
eine Delay-Funktion, ein Noise Gate sowie einen schaltbaren Polaritätswandler. Jeder Ausgang verfügt über 6 Equalizer (Low-Shelf, High Shelf und
Parametric EQ), eine Delay-Funktion. Sowohl die High-Pass Filter als auch
Low-Pass Filter können in den Betriebsmodi Linkwitz-Riley, Butterworth und
Bessel bei einer einstellbaren Flankensteilheit von bis zu 48 dB/Oct. betrieben
werden. Jeder Ausgangskanal verfügt über einen einstellbaren Limiter, der
die angeschlossene Peripherie schützt. Der Einsatz eines Flash Speicherbausteins als sicheres Langzeitmedium ermöglicht eine hohe interne
Speicherkapazität mit Platz für 30 frei konfigurierbare Programme (Presets).
Diese können über das Auswahlmenü am Gerät, über 3 frei belegbare Taster
mit Schnellwahlfunktion sowie über die PC Steuersoftware geladen werden.
The DC8000 is equipped with 4 analog and digital (AES/EBU© format)
inputs, 8 analog outputs and two RS485 remote-connectors. The use of
modern and fast DSPs enables a latency (analog to analog) of 0,625 ms only.
Each input channel includes 8 equalizers (with low-shelf, high-shelf and
parametric function), a delay function and a noise gate. The polarity of each
input channel can be switched from + to -. Each output channel includes 6
equalizers (with low-shelf, high-shelf and parametric function) and a delay
function. The HPF (high-pass filter) and the LPF (low-pass filter) is part of
each output channel. Both offer three different operation modes: LinkwitzRiley, Butterworth and Bessel (up to 48 dB/Oct). Each output channel
includes a high performance limiter. The integrated flash memory chip offers
space for 30 presets which can be loaded via the preset-menu, three defaultbuttons or the PC remote software.
DSP
► 4 Ein- und 8 Ausgänge mit frei wählbarem Routing
► 8 Equalizer pro Eingangskanal
► 6 Equalizer pro Ausgangskanal
► Elektronisch symmetrische Ein- und Ausgänge
► Analoge und digitale (AES/EBU©) Eingänge
► RS485 Anschluss rückseitig
► Leistungsstarker 32-Bit DSP
► 96 kHz AD/DA Wandler (Burr Brown)
► PC-Druckfunktion “DATA VIEW” zur Archivierung
► Hoher Dynamikumfang von >114 dB
Inputs:
Outputs:
Frequency crossovers:
► 4 inputs and 8 outputs with free routing
► 8 equalizers per input channel (low-/highshelf/parametric)
► 6 equalizers per output channel
► Symmetric inputs and outputs via XLR steel-connectors
► Analog and digital (AES/EBU©) inputs
► RS485 connectors at the rear-panel
► High performance 32-bit DSP (digtial sound processor)
► 96 kHz AD/DA converters (Burr Brown)
► PC print function „DATA VIEW“
► Dynamic range >114 dB
4 (analog & digital AES/EBU©)
8 (analog)
6 dB/Oct., 12 dB/Oct., 18 dB/Oct., 24 dB/Oct., 48 dB/Oct. (slope),
Linkwitz-Riley, Butterworth und Bessel
Filters:
80 parametric EQs, 80 shelving EQs (high shelf or low shelf),
8 low cut filters, 8 high cut filters, 8 limiters / compressors with peak limiter
Delay:
4 master delays (0 ms - 990 ms)
8 channel delays (0 ms - 990 ms)
Converting & processing:
Burr Brown© AD/DA converters, 96 kHz sampling rate (internal),
32-Bit processor (DSP), 128-times over sampling,
Input connectors:
Input voltage:
Max. input voltage:
Input impedance:
Common mode rejection:
Output connectors:
Output voltage:
Max. output voltage:
Output impedance:
Minimum load impedance:
Frequency response:
S/N ratio:
Distortion:
Display:
Mains voltage / power consumption:
Latency:
Maximum power consumption:
Dimensions unit (mm) W x H x D:
Weight (net / gross):
Optional Accessories:
4 x Neutrik© XLR female, electronically balanced
1.55 V / + 6 dBu (nominal)
24.5 V / + 30 dBu
20 kohms
> 70 dB / 1 kHz
8 x Neutrik© XLR male, electronically balanced
1.55 V / + 6 dBu (nominal)
8.7 V / + 21 dBu
> 100 ohms
600 ohms
20 Hz - 20 kHz (-0.5 dB)
114 dB (typical)
< 0.01%
4 x 20 character LCD display with LED background lighting
90 - 250 V (AC) @ 50 - 60 Hz / 20 W
0,625 ms
20 W
472 x 44 x 277, 19” format, 1 RU/RS (HE)
3.5 kg / 5 kg
URC2: Converter USB / RS485 (# 20065)
PATCH1: Patch cable, 1 x XLRF, 2 x XLRM (#90034)
19
Controllers
DC4000
32-Bit digital 2-in/4-out speaker management system
including RS485 and USB interface.
20
The DC4000 is a digital 2-in / 4-out speaker management matrix system
with an internal resolution of 32 bit and 96 kHz sampling rate.
Der DC4000 verfügt über 2 analoge Eingänge, 4 analoge Ausgänge und zwei
Remoteschnittstellen (USB und RS485). Durch den Einsatz moderner DSPs
beträgt die Latenzzeit (analog zu analog) nur 0,625 ms. Alle Eingänge
verfügen über 6 Equalizer (Low-Shelf, High-Shelf und Parametric EQ), eine
Delay-Funktion sowie einen schaltbaren Polaritätswandler. Jeder Ausgang
verfüget über 6 Equalizer (Low-Shelf, High Shelf und Parametric EQ) und eine
Delay-Funktion. Sowohl die HPF (High-Pass Filter) als auch LPF (Low-Pass
Filter) können in den Betriebsmodi Linkwitz-Riley, Butterworth und Bessel bei
einer einstellbaren Flankensteil-heit von bis zu 48 dB/Oct. betrieben werden.
Jeder Ausgangskanal verfügt über einen einstellbaren Limiter, der die
angeschlossene Peripherie schützt. Der Einsatz eines Flash Speicherbausteins als sicheres Langzeitmedium ermöglicht eine hohe interne
Speicherkapazität mit Platz für 30 frei konfigurierbare Programme (Presets).
Diese können über das Auswahlmenü am Gerät, über 3 frei belegbare Taster
mit Schnellwahl Funktion sowie über die PC Steuersoftware geladen werden.
The DC4000 is equipped with 2 analog inputs, 4 analog outputs and two
remote-connectors (USB and Rs485). The use of modern and fast DSPs
enables a latency (analog to analog) of 0,625 ms only. Each input channel
includes 6 equalizers (with low-shelf, high-shelf and parametric function),
and a delay function. The polarity of each input channel can be switched from
+ to -. Each output channel includes 6 equalizers (with low-shelf, high-shelf
and parametric function) and a delay function. The HPF (high-pass filter) and
the LPF (low-pass filter) is part of each output channel. Both offer three
different operation modes: Linkwitz-Riley, Butterworth and Bessel (up to 48
dB/Oct). Each output channel includes a high performance limiter. The
integrated flash memory chip offers space for 30 presets which can be
loaded via the preset-menu, three default-buttons or the PC remote software.
LEVEL
POL.
DELAY
PEQ
LEVEL
POL.
DELAY
PEQ
ROUTING
Der DC4000 ist ein digitaler 2- in 4-Wege Systemcontroller mit einer
internen Auflösung von 32 Bit und 96 kHz Sampling Rate.
LEVEL
POL.
DELAY
PEQ
X-OVER
LIMIT
LEVEL
POL.
DELAY
PEQ
X-OVER
LIMIT
LEVEL
POL.
DELAY
PEQ
X-OVER
LIMIT
LEVEL
POL.
DELAY
PEQ
X-OVER
LIMIT
RS485NET
DSP
► 2 Ein- und 4 Ausgänge mit frei wählbarem Routing
► 6 Equalizer pro Eingangskanal
► 6 Equalizer pro Ausgangskanal
► Elektronisch symmetrische Ein- und Ausgänge
► RS485 & USB Interface
► Leistungsstarker 32-Bit DSP
► 96 kHz AD/DA Wandler (Burr Brown)
► PC-Druckfunktion “DATA VIEW” zur Archivierung
► Hoher Dynamikumfang von >112 dB
Inputs:
2 (analog)
Outputs:
4 (analog)
Frequency crossovers:
► 2 inputs and 4 outputs with free routing
► 6 equalizers p. input ch. (low-/high-shelf/parametric)
► 6 equalizers p. output ch. (low-/high-shelf/parametric)
► Symmetric inputs and outputs via XLR steel-connectors
► RS485 & USB connectors at the rear-panel
► High performance 32-bit DSP (digtial sound processor)
► 96 kHz AD/DA converters (Burr Brown)
► PC print function „DATA VIEW“
► Dynamic range >112 dB
6 dB/Oct., 12 dB/Oct., 18 dB/Oct., 24 dB/Oct., 48 dB/Oct. (slope),
Linkwitz-Riley, Butterworth und Bessel
Filters:
36 parametric EQs, 36 shelving EQs (high shelf or low shelf),
4 low cut filters, 4 high cut filters, 4 limiters
Delay:
2 master delays (0 ms - 987 ms)
4 channel delays (0 ms - 984 ms)
Converting & processing:
Burr Brown© AD/DA converters, 96 kHz sampling rate (internal),
32-Bit processor (DSP), 128-times over sampling,
Input connectors:
Input voltage:
Max. input voltage:
Input impedance:
Common mode rejection:
Output connectors:
Output voltage:
Max. output voltage:
Output impedance:
Minimum load impedance:
Frequency response:
S/N ratio:
Distortion:
Display:
Mains voltage / power consumption:
Latency:
Maximum power consumption:
Dimensions unit (mm) W x H x D:
Weight (net / gross):
Optional Accessories:
2 x Neutrik© XLR female, electronically balanced
1.55 V / + 6 dBu (nominal)
24.5 V / + 30 dBu
20 kohms
> 70 dB / 1 kHz
4 x Neutrik© XLR male, electronically balanced
1.55 V / + 6 dBu (nominal)
8.7 V / + 21 dBu
> 100 ohms
600 ohms
20 Hz - 20 kHz (-0.5 dB)
112 dB (typical)
< 0.01%
2 x 20 character LCD display with LED background lighting
90 - 250 V (AC) @ 50 - 60 Hz / 20 W
0,625 ms
15 W
483 x 43.6 x 225, 19” format, 1 RU/RS (HE)
3.5 kg / 5 kg
URC2: Converter USB / RS485 (# 20065)
PATCH1: Patch cable, 1 x XLRF, 2 x XLRM (#90034)
21
Power Amplifiers
X SERIES
High performance class-H power amplifiers.
Durable and long-lasting.
22
Die Modelle der X-Serie sind zweikanalige Verstärker auf einer Bauhöhe
von nur 2 HE (Höheneinheiten).
The X-series amplifiers are two-channel amplifiers at a compact size of 2
HU (rack spaces) only.
An der Frontseite befinden sich zwei Level-Potentiometer mit Rasterung
sowie der Netzschalter. Das leicht ablesbare LED Display informiert über den
Betriebszustand der Endstufen. An der Rückseite befinden sich zwei
Eingangsbuchsen und 2 Ausgangsbuchsen (Link) in XLR Bauweise. Die
Eingangsempfindlichkeit aller Modelle der X-Serie beträgt 32 dB. Die
Leistungsausgänge beider Kanäle sind in SPEAKON© Variante ausgeführt.
Am Ausgang 1 liegt auf den Pins 2 (+/-) zusätzlich das Signal des Ausgangs
2 an. Dies ermöglicht eine vierpolige Verkabelung von 2-Wege Lautsprechersystemen. Die Leistungsausgänge beider Kanäle sowie der Bridge Ausgang
stehen ebenso über Binding Posts zur Verfügung. Die Betriebsmodi Stereo,
Parallel und Bridge können über einen Schalter ausgewählt werden. Der
Limiter kann an einem Schalter ein- oder ausgeschaltet werden. Alle Modelle
der X-Serie verfügen über eine Einschaltverzögerung mittels Relais, welche
das Ansprechen von Netzsicherungen verhindern. Ebenso werden die
Leistungsausgänge verzögert zugeschaltet.
The front panel shows two gain controls for easy access and the main switch.
The LED display informs about the condition of the amplifiers. The rear side
shows two XLR input connectors and two XLR output connectors (link). The
input sensivity (gain) is 32 dB at all models. Two SPEAKON© outputs and
four binding posts are mounted at the rear side. The SPEAKON© connector
of output 1 (left) is connected at all four poles. This connector offers the
output signal of channel 2 (right) at the pins. This enables a four-pole
connection of two-way speaker systems with one speaker cable only. The
bridged output is available at the binding posts. The X-series amplifiers can be
switched into three different operation modes: stereo, parallel and bridge
mode. The limiters can be switched on or off. All models are equipped with a
switch-on delay to protect the connected speakers.
Features
► Professionelle Audioqualität und robuste Verarbeitung
► Temperaturgesteuerte Hochleistungslüfter
► Schaltbare Limiter zur Vermeidung von Verzerrungen
► SPEAKON© Buchsen & Binding Posts in den Ausgängen
► Umfangreiches Paket an Schutzschaltungen
Features
► Professional audio quality and robust processing
► High performance fans, controlled by temperature sensors
► Clip limiters
► SPEAKON© output connectors (Neutrik©) and binding posts
► Comprehensive package of safety circuits
X 800
X 1200
X 2000
Class-H
Class-H
Class-H
8 ohms per channel (watt):
250
400
650
4 ohms per channel (watt):
400
600
1.050
2 ohms per channel (watt):
550
820
1.500
8 ohms bridged (watt):
950
1.250
2.050
4 ohms bridged (watt):
1.050
1.400
2.950
THD at 1 kHz and 1 dB below clipping:
0.05 %
0.05 %
0.05 %
THD at 100 kHz and 1 dB below clipping:
0.06 %
0.06 %
0.06 %
THD at 10 kHz and 1 dB below clipping:
0.1 %
0.1 %
0.1 %
1.0 mV (95 dB)
1.0 mV (95 dB)
1.0 mV (95 dB)
Hum and noise:
Channel separation at 10 kHz:
Output impedance:
Slew rate:
Input Impedance:
Common mode rejection:
Gain controls:
54 dB
54 dB
54 dB
600 ohms
600 ohms
600 ohms
30 V / µs
30 V / µs
30 V / µs
20 k ohms bal. /
20 k ohms bal. /
20 k ohms bal. /
10 k ohms bal.
10 k ohms bal.
10 k ohms bal.
60 dB
60 dB
60 dB
41 pos. detend
41 pos. detend
41 pos. detend
Clip indicators:
LED
LED
LED
Output headroom indicators:
LEDS
LEDS
LEDS
Input connectors:
Neutrik© XLR female
Neutrik© XLR female
Neutrik© XLR female
Link connectors:
Neutrik© XLR male
Neutrik© XLR male
Neutrik© XLR male
Stereo/brigde/parallel
Stereo/brigde/parallel
Stereo/brigde/parallel
Mode switch:
On / off
On / off
On / off
Output connectors:
Neutrik© SPEAKON©
Neutrik© SPEAKON©
Neutrik© SPEAKON©
4-pol. NL4
4-pol. NL4
4-pol. NL4
Operation voltage:
198 - 242 volts
198 - 242 volts
198 - 242 volts
Soft start:
Yes
Yes
Yes
Peak inrush current:
5A
5A
5A
210 - 242 V
210 - 242 V
210 - 242 V
Limit switch:
Full output power at 4 ohms:
Minimum start-up voltage:
Maximum power consumption:
198 V
198 V
198 V
1.200 W
1.800 W
2.500 W
Dimensions unit (mm) W x H x D:
483 x 89 x 400
483 x 89 x 400
483 x 89 x 400
Dimensions packing (mm) W x H x D:
570 x 160 x 480
570 x 160 x 480
570 x 160 x 480
16 kg / 18 kg
17 kg / 19 kg
20 kg / 22 kg
Weight (net / gross):
23
Power Amplifiers
DXI 8200
Light weighted 8-channel class-D switch mode
power amplifier with 8 x 200 W (RMS).
24
Die DXI8200 ist ein 8-Kanal Verstärker auf einer Bauhöhe von 2 HE
(Höheneinheiten).
The DXI8200 is a 8-channel power amplifier at a compact size of 2 HU
(rack spaces).
An der Frontseite befinden sich 8 versenkte Level-Potentiometer, 8 MuteSchalter sowie der Netzschalter. Das leicht ablesbare LED Display informiert
über den Betriebszustand der Endstufen. An der Rückseite befinden sich 8
Eingangsbuchsen und 8 Ausgangsbuchsen. Die Eingangsempfindlichkeit
der DXI8200 beträgt 32 dB. Die Leistungsausgänge aller Kanäle sind in
Barrier Strip Variante ausgeführ t. Im teilgebrückten Modus leistet die
DXI8200 insgesamt 2 x 400 Watt (8 Ohm) plus 4 x 200 Watt RMS (4 Ohm).
Die Betriebsmodi Stereo, Parallel und Bridge können über vier Schalter an der
Geräterückseite ausgewählt werden. Die DXI8200 verfügt über eine
Einschaltverzögerung mittels Relais, welche das Ansprechen von Netzsicherungen verhindern. Ebenso werden die Leistungsausgänge verzögert
zugeschaltet.
The front panel shows 8 gain controls for easy access, 8 mute-switches and
the main switch. The LED display informs about the condition of the
amplifiers. The rear side shows 8 input-connectors and 8 output-connectors.
The input sensivity (gain) is 32 dB each channel. The outputs offer barrier
strip connectors. The DXI8200 can be used also in half-bridged mode (2 x
400 watts plus 4 x 200 watts RMS / 4 ohms). The DXI8200 can be switched
into three different operation modes: stereo, parallel and bridge mode. The
independent limiters can be switched on or off. All models are equipped with a
switch-on delay to protect the connected speakers.
Features
► 8-Kanal Verstärker mit 8 x 200 Watt RMS / 4 Ohm
► Schaltnetzteil für geringes Gewicht (nur 8 kg)
► Kompaktes Design und einfache Bedienung
► Integrierte Limiter zur Vermeidung von Verzerrungen
► Class-D Technologie für hohe Effizienz
► Euroblock Buchsen in den Eingängen
► Barrier Strip Buchsen in den Ausgängen (Stecker im Lieferumfang)
► Umfangreiches Paket an Schutzschaltungen
► Einschaltverzögerung über Relais
Features
► 8-channel power amplifier (8 x 200 watts RMS / 4 ohms)
► SMPS (switch mode power supply / 8 kg only)
► Compact design and lightweight construction
► Independent clip limiters
► Class-D technology for high efficiency
► Euroblock connectors at inputs
► Barrier strip connectors at outputs (cable-plugs included)
► Comprehensive package of safety circuits
DXI 8200
Class-D
8 ohms per channel (watt):
4 ohms per channel (watt):
8 ohms bridged (watt):
THD+N at 1 kHz half power @ 4 ohms:
Damping factor:
Channel separation at 10 kHz:
Input Impedance:
Common mode rejection:
Gain controls:
Clip / protect indicators:
Output headroom indicators:
Input connectors:
Link connectors:
Mode switch:
Limit switch:
130 (x 8)
200 (x 8)
400 (x 2 max. in bridge mode)
<0.5 %
600
<60 dB
40 k ohms bal. / 20 k ohms bal.
70 dB
8
LEDS
LEDS
Euroblock
n/a
Stereo / brigde / parallel
n/a
Output connectors:
Barrier Strip (connectors included)
Operation voltage:
220 - 242 volts
Soft start:
Switch mode power supply (SMPS)
Maximum power consumption:
Yes
Yes
1.300 W
Dimensions unit (mm) W x H x D:
483 x 89 x 431
Dimensions packing (mm) W x H x D:
544 x 123 x 544
Weight (net / gross):
8 kg / 10 kg
25
Power Amplifiers
MX3.2 K4
Light weighted 4-channel class-D switch mode
power amplifier with 4 x 800 W (RMS).
MK3.2 K4
Class-D
8 ohms per channel (watt):
800 (x 4)
THD+N at 1 kHz @ 8 ohms, 3 dB below rated power:
<0.05 %
IMD at 60 Hz+7kHz @ 8 ohms, 3 dB below rated power:
< 0.05 %
Slew rate:
30 V / us
Damping factor:
Signal/noise rate:
Channel separation at 1 kHz:
Input Impedance:
Common mode rejection:
Gain controls:
Clip / protect indicators:
Output headroom indicators:
> 300
> 105 dB
> 60 dB
10 k ohms bal. (+/- 1%)
> 70 dB
4
LEDS
LEDS
Input connectors:
4 x XLR female (NEUTRIK©)
Link connectors:
4 x XLR male (NEUTRIK©)
Dynamic limiter:
full automatic
Cooling:
air draft (fan with stepless speed)
Output connectors:
4 x SPEAKON NL4 (NEUTRIK©)
Operation voltage:
220 - 245 volts
Soft start:
Switch mode power supply (SMPS)
Maximum power consumption:
Yes (5 sec.)
Yes
10 A / 230 V (2.300 W max.)
Dimensions unit (mm) W x H x D:
483 x 89 x 365
Dimensions packing (mm) W x H x D:
544 x 123 x 500
Weight (net / gross):
26
400 (x 4)
4 ohms per channel (watt):
8 kg / 10 kg
www.novacoustic.com
www.facebook.com/novaofficialfanpage
a division of
Gewerbering 42 • 94060 Pocking / Germany • Phone: +49 (0) 85 31 - 31 71 - 0 • Fax: +49 (0) 85 31 - 31 71 - 25
Mail us: info@novacoustic.de
Limited liability on contents. Subjects to change without prior notice. All rights reserved © 2004-2016. Printed in Austria 2016.
We continually engage in research related to product improvement. Materials, production methods and design refinements are introduced into existing products.
Any current NOVA product may differ in some respect from its published description, but will always equal or exceed the original design specifications unless otherwise stated.
Download PDF
Similar pages