Wireless Multi-Channel Expandable HDMI Extender Installation Guide 04-1088C Introduction The Wireless Multi-Channel Expandable HDMI Extender wirelessly transmits HDMI signals with stereo audio up to 165ft. Features and Benefits • • • • • • Streaming video content to two remotely located displays simultaneously when adding a 2nd receiver unit (CE-H22R14-S1 sold separately) Supports high video resolutions up to 1080p Full HD to deliver stunning and crystal clear images 10 selectable wireless channels prevent signal interference and provide optimal reception quality Adding one transmitter unit to broadcast multiple source contents simultaneously by simply assigning each individual source content with different wireless transmitting channels (0 to 9), extra transmitter unit (CE-H22Q14-S1) sold separately With built-in switch button and included palm size remote control to select the wireless channels of both RX and TX units to retrieve different video content or set for channel pairing Included IR extension modules allow remote controlling the HDMI source device from the display unit Package Contents • • • • • • 2 Wireless Multi-Channel Expandable HDMI Extender IR blaster extension cable IR receiver extension cable Power adapters (x2) Remote control (with one battery) Installation Guide Package Contents • • • • • • Wireless Multi-Channel Expandable HDMI Extender IR blaster extension cable IR receiver extension cable Power adapters (x2) Remote control (with one battery) Installation Guide Specifications Wireless Technology 5 GHz Signal Type HDMI HDMI Version HDMI 1.3 compatible HDCP Version HDCP 1.2 compatible Transmission Distance Up to 50m (165ft) Supported Resolutions 1080p/1080i/720p/576p/576i/480p/480i HDMI Cable Distance Up to 5m (Input & Output) Audio Format R/L stereo audio (2-ch) Power Input: AC 100-240V, 50/60Hz Output: DC 5V/2A Color Black Dimensions (TX & RX) 3.94" (W) x 0.98" (H) x 3.07" (D) Weight 0.51lbs (TX/RX) Operating Temperature 32 to 122 degrees F Storage Temperature 14 to 140 degrees F Operating Humidity 0% ~ 90% RH (non-condensing) Note: The transmission distance will vary depending on building layout, electronic interference, other environmental conditions, and may be much less than the maximum. 3 Product Layout Switch button IR window Input channel indicator Figure 1: Transmitter (TX) - front side • • • Input channel indicator: Indicates the input channel selected. There are 10 channels (0-9) Switch button: Press to select the channel IR window: Receives infrared signals from the included remote control Power jack IR Out HDMI In Antenna port Connection indicator Input indicator Figure 2: Transmitter (TX) - rear side • • • • • • 4 Power jack: Connects to the included power adapter HDMI In: Connects to your HDMI source with a HDMI cable (cable not included) Input indicator: On when the HDMI signal is linked properly Connection indicator: - On: The Transmitter is powered on - Blinking: The wireless connection is established IR out: Plug the IR Blaster extension cable here Antenna port: Attach the included Antenna here Switch button Input channel indicator IR window Figure 3: Receiver (RX) - front side • • • Input channel indicator: Indicates the input channel selected. There are 10 channels (0-9) Switch button: Press to select the channel IR window: Receives infrared signals from the included remote control Power jack HDMI Out IR in Antenna port Data transmission indicator Connection indicator Figure 4: Receiver (RX) - rear side • • • • • • Power jack: Connects to the included power adapter Connection indicator: - On: The receiver is powered on - Blinking: The wireless connection is established Data transmission indicator: On when the HDMI signal is linked properly HDMI Out: Connects to your HDMI display with a HDMI cable (cable not included) IR in: Plug the IR Receiver extension cable here Antenna port: Attach the included Antenna here 5 IR Extension cables (20-60Hz Frequency Range) The IR Extension feature allows you to control your HDMI source device from a remote location. Figure 5: IR blaster extension cable (IR OUT) • • Figure 6: IR receiver extension cable (IR IN) IR blaster extension cable (IR OUT): Plugs into the Transmitter's IR Out socket. It emits the IR signals received from the IR receiver extension cable of the Receiver unit and directs it to the HDMI source's IR receiver window IR receiver extension cable (IR IN): Plugs into the Receiver's IR In socket. It receives IR signals from the HDMI source's remote control and directs it to the IR blaster extension cable of the Transmitter unit Note: Incorrect placement of the IR Blaster and IR Receiver extension cables may result in failure of these cables. Please check carefully before plugging in the IR cables to ensure connecting to the proper IR sockets. 6 Hardware Installation 1. Power off all devices including your HDMI source and display. 2. Attach the included antennas to the TX and RX. 3. Connect your HDMI source to the Transmitter's HDMI IN connector. 4. Optional: Connect the IR Blaster extension cable to the Transmitter's IR Out. Face the eye towards your HDMI device's IR window. This connection is needed only if you need to control your HDMI source from the remote location. 5. Connect your HDMI display to the Receiver's HDMI OUT connector with an HDMI cable (not included). 6. Optional: Connect the IR Receiver extension cable to the Receiver's IR In. This connection is needed only if you need to control your HDMI source from the remote location. 7. Plug the included power adapters into the Transmitter's and Receiver's Power Jacks, then plug both power adapters into reliable power outlets. 8. Power on your HDMI device and HDMI display. 9. Use the included remote control or built-in switch button to select the same channel for the TX and RX (for channel pairing). 10. The device is ready for use. 7 Application The Wireless Multi-Channel Expandable HDMI Extender extends HDMI A/V signals to a remote display up to 165ft away and supports high resolutions up to 1080p Full HD. Note: The transmission distance will vary depending on building layout, electronic interference, other environmental conditions, and may be much less than the maximum. Figure 7 Multicast ability: Broadcasts and independent streams video content to two remotely located displays simultaneously*. * Remark: Extra receiver unit (CE-H22R14-S1) sold separately Figure 8 8 Matrix connections: Allows a user to switch and independently select any of the multiple sources* (up to 2) between 2 displays*. * Remark: Extra transmitter unit (CE-H22Q14-S1) and receiver unit (CEH22R14-S1) sold separately Figure 9 9 Notice • • • • • • • Wireless signals transmitted through walls, glass, brick or other solid objects will cause signal loss and decrease the transmission distance It's recommended that the distance between two receivers not less than 3 meters Keep the unit in a well ventilated environment to prevent it from overheating DO NOT expose the unit to rain, moisture, or liquids DO NOT place anything on the unit DO NOT open the housing, doing so will void the warranty and may cause personal injury due to electronic hazard DO NOT plug-in or take-out the IR extension cables when the unit is powered on FAQ & Solutions Q: A: Q: A: Q: A: 10 The TV displays "Waiting for connection...": Check whether the power adapters of Transmitter (TX) and Receiver (RX) are connected. The TV displays "Please check the TX input signal": 1) Make sure the HDMI device is connected to the Transmitter (TX). 2) Use different HDMI cables. 3) If still not working, connect the HDMI device to the TV directly to see if there's a signal. The unit isn't working properly: 1) Check the HDMI cable lengths are within 5m. 2) Check the transmission distance is within 50m. 3) Remove other wireless signals and move any obstacles that are blocking the signal. 4) Decrease the distance between the transmitter unit and the receiver unit. Technical Support and Warranty QUESTIONS? SIIG’ s Online Support has answers! Simply visit our web site at www.siig.com and click Support. Our online support database is updated daily with new drivers and solutions. Answers to your questions could be just a few clicks away. You can also submit questions online and a technical support analyst will promptly respond. SIIG offers a 2-year manufacturer warranty with this product. This warranty covers the original purchaser and guarantees the product to be free of any defects in materials or workmanship for two (2) years from the date of purchase of the product. This warranty is not transferable and is available only to the original purchaser of the product. SIIG will, at our discretion, repair or replace (with an identical product or product having similar features and functionality) the product if defective in materials or workmanship. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Please see our web site for more warranty details. If you encounter any problems with this product, please follow the procedures below. A) If it is within the store's return policy period, please return the product to the store where you purchased it. B) If your purchase has passed the store's return policy period, please follow these steps to have the product repaired or replaced. Step 1: Submit your RMA request. Go to www.siig.com, click Support, then Request A Product Replacement to submit a request to SIIG RMA or fax a request to 510-657-5962. Your RMA request will be processed, if the product is determined to be defective, an RMA number will be issued. Step 2: After obtaining an RMA number, ship the product. • Properly pack the product for shipping. All software, cable(s) and any other accessories that came with the original package must be included • Include a copy of your original sales receipt inside the package with date of purchase and place of purchase circled and clearly visible • Clearly write your RMA number on the top of the returned package. SIIG will refuse to accept any shipping package, and will not be responsible for a product returned without an RMA number posted on the outside of the shipping carton • You are responsible for the cost of shipping to SIIG. Ship the product to the following address: SIIG, Inc. 6078 Stewart Avenue Fremont, CA 94538-3152, USA RMA #: • SIIG will ship the repaired or replaced product via Ground in the U.S. and International Economy outside of the U.S. at no cost to the customer 11 About SIIG, Inc. Founded in 1985, SIIG, Inc. is a leading manufacturer of IT connectivity solutions (including Serial ATA and Ultra ATA Controllers, FireWire, USB, and legacy I/O adapters) that bridge the connection between Desktop/ Notebook systems and external peripherals. SIIG continues to grow by adding A/V and Digital Signage connectivity solutions to our extensive portfolio. All centered around the distribution and switching of A/V signals over CAT5/6, these products include matrix switches, distribution amplifiers, extenders, converters, splitters, cabling, and more. SIIG is the premier one-stop source of upgrades and is committed to providing high quality products while keeping economical and competitive prices. High-quality control standards are evident by one of the lowest defective return rates in the industry. Our products offer comprehensive user manuals, user-friendly features, and are backed by an extensive manufacturer warranty. SIIG products can be found in many computer retail stores, mail order catalogs, and e-commerce sites in the Americas, as well as through major distributors, system integrators, VARs and e-commerce sites. PRODUCT NAME Wireless Multi-Channel Expandable HDMI Extender FCC RULES: TESTED TO COMPLY WITH FCC PART 15, CLASS B OPERATING ENVIRONMENT: FOR HOME OR OFFICE USE FCC COMPLIANCE STATEMENT: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. THE PARTY RESPONSIBLE FOR PRODUCT COMPLIANCE SIIG, Inc. 6078 Stewart Avenue Fremont, CA 94538-3152, USA Phone: 510-657-8688 Wireless Multi-Channel Expandable HDMI Extender is a trademark of SIIG, Inc. SIIG and the SIIG logo are registered trademarks of SIIG, Inc. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other names used in this publication are for identification only and may be trademarks of their respective owners. November, 2017 Copyright © 2017 by SIIG, Inc. All rights reserved.