Handlebar | windscreen | fuel solutions
p. 720
Electrics | power
p. 723
718
EQUIPMENT
UNIVERSALTEILE
EQUIPAMIENTO
ABBIGLIAMENTO
ÉQUIPEMENT
Oil | care products
p. 728
Tools | repair kits
p. 735
719
040-1395
Universal windscreen spoiler, small
Thanks to an ingenious mechanism, the spoiler can be mounted on top of the existing
windscreen without tools or screws. The thickness of the spoiler screen can be adjusted
and screen curves can be compensated up to a certain range by means of elastic elements.
This spoiler was developed and made from lasercut and CNC-milled parts. Please check
first whether your spoiler screen can withstand the increased loads caused by wind
pressure!Increases the height of the windscreen by approx. 70mm
Size: approx. 200mm x 135mm x 50mm; Weight: approx. 200 g
040-1395
Universal windscreen spoiler
As requested by many customers, there is finally a windscreen spoiler that fits almost all
common windscreens. Simply and easy to fit. Increases windscreen height by about 13 cm
and is adjustable to different angles. Forget about nasty airflow and noise.
040-1390
040-1392
lockable
040-1392
Rear-view mirror Adventure folding
Robsut folding rear-view mirror for all motorcycles with a right-handed thread
• can be set to eleven predefined positions
• can be used left or right
• with ECE certificate
• patented design
040-0770
M10x1,5 for BMW
040-0771
M10x1,25 for example KTM, Honda, Ducati
Folding mirror, length adjustable
Universal folding mirror, length and angle continuously adjustable, to suit most motorbikes.
• suitable for use on left or right
• carries the E test mark.
040-0760
Mounting adapter
040-0761 for the BMW F800/650(Twin)GS, HP2 and R1200GS/Adv.
720
EQUIPMENT
Mirror extension
The mirror extension puts the mirror in a much better position. This improves
the rider‘s field of vision. This discreet component increases safety and is almost
unnoticeable.
It‘s a must for anyone who wants to see more than just their arms in the mirrors.
Parts supplied: left and right side
040-0774 M10x1,25 (for var. japan. Motorcycles)
040-0775M10 x 1,5 (for different BMW)
Handlebar mount
for rear-view mirror
M10x1,25 thread.
040-0773
Adapter for rear-view
mirror for right-handed
M10x1,25 to M8x1,25
thread.
040-0772
Crossbar
For some time now, many enduro bikes have not been equipped with a crossbar. Many streetfighters with high
handlebars don’t have one, although it is ideal for mounting some interesting accessories: - Roadbook holders GPS receivers - Motorcycle computers - Map holders - and many more
To fit all these accessories you will need to mount our crossbar. The original handlebars are retained. Simply screw
the brace to your handlebars. These universal crossbars fit handlebars with 22 to 28 mm diameter (standard steel
or aluminium handlebars and Magura or ProTaper handlebars that have a conical shape). Now you can mount your
equipment. Perfect solution if you don’t need a crossbar all the time.
040-0603
22/25 290 mm
040-0604
22/25 250 mm
040-0605
22/25 275 mm SPECIAL PARTS
040-0601 22/25 320 mm
Headlight protector for Touratech fog headlight and Xenon
headlight; anodised black aluminium
Robust enough to protect against flying stones filigree enough not to impair the lighting intensity!
040-1515
( per piece) 721
Metal canister, 10 litre
Metal canister for a professional use in the toughest conditions. The canister has an opening especially made for petrol nozzles and allows a safe transport of fluids.
CAUTION! If used as a petrol can make sure it is fastened securely to an area of the motorbike that is less vulnerable to impacts.
070-0693
Mr. Funnel - funnel with fuel filter
Stops contaminated fuel forever! Mr. Funnel filters out dirt, debris and even water from
fuel. Suitable for petrol, diesel, 2-stroke mixture, kerosene, heating oil Specially coated fine
stainless steel mesh filter Anti-static rubber body
Easy to clean
100-0028
Emergency fuel bag, Touratech Jollytank, disposable folding canister
8l
Practical, versatile, robust and reliable. The Jollytank is a foldable emergency fuel bag.
Thanks to the use of non-toxic materials, it can also be used for foodstuffs such as water,
wine and oil.
• Capacity: 8 litres
• Weight: approx. 50 gr (empty)
• With carrying handle
• Disposable container, can be recycled
100-0032
Emergency fuel bag
(disposable folding canister)
Clean, convenient and safe while filling, transporting and pouring. Takes up minimal space
and is easy to use. The fuel bag is approved for use as a fuel container.
Including:
• Spout for diesel and petrol tanks
• Carrying handle
Volume: 5 litres
Weight: approx. 100 g (empty)
TIP: An ideal solution when there‘s just one (too) long section on the tour!
100-0029
722
EQUIPMENT
QD couplings for fuel lines
• Easy to fill fuel stoves from the tank
• Easy fuel line cut off
• Quick tank removal without spilling fuel
100-0100 QD coupling for fuel line 6mm (1x)
100-0101 QD coupling 2-way 6mm (1x)
100-0106 QD coupling for fuel line 8mm (1x)
100-0108 QD coupling 2-way 8mm (1x)
Powerbank and jump start for motorbikes, Pow All 14.000mAh
Technical data:
Output voltage to car start: 12V
USB output: 5V/2.1A
Charge mode: CC/CV 15V/1A Start
Current: 400A
Maximum current: 600A (3S)
Life cycle: 1500 times
Possible temperatures: -20 to +85 degrees
065-0753
Accu charger Intelli 3 for motorcycles and cars
The accu charger Intelli 3 is the intelligent universal charging unit for
lead acid and lithium batteries.
The charging unit has different charging programmes for lead acid
and LiFePO4 batteries. Its maximum charging current of 4 Ampere
not only make it ideal for recovery, charging and maintaining all ATV,
scooter and motorcycle batteries (incl. CAN-Bus Systems), but also for
the maintenance of car batteries.
SPECIAL PARTS
The modern way to jump start your vehicle. This 14.000mAh mobile starter unites the greatest performance with
the smallest size. This jump start power station can start vehicles of any kind up to 80A and 3.0L cc. Whether diesel
or petrol engine makes no difference to this mobile power station. Modern lithium-ion technology makes it possible - the jump start device is only as big as a hand (155*75*34mm) and, weighing just 427g, is a real flyweight. With
its 4 in 1 charging cable and USB port, the jump start charger acts as a power bank. In addition, it has an integrated LED lamp with three different modes (SOS, flashing & continuous).
130-0017
723
BC Duetto battery charger
for lead acid and lithium batteries
BC DUETTO is the intelligent universal charging unit for lead acid and lithium batteries.
The charging unit has two different charging programmes for lead acid and LiFePO4
batteries. Its maximum charging current of 1.5 Ampere not only make it ideal for recovery, charging and maintaining all ATV, scooter and motorcycle batteries, but also for the
maintenance of car batteries.
The charging unit can remain connected to the battery without risk or the necessity of
removing the battery from the car: it will also keep the battery charged for longer periods
of non-use (even months). The scope of delivery also includes a water-proof battery cable
with eyelets so that it can remain attached to the car to guarantee fast charging.
130-0015
Charger „Compact Worldwide”
Suitable for BMW CAN bus. Super-compact charger, extremely easy to use, also suitable for
all CAN bus motorcycles such as the R 1200 GS, F 800 GS, etc.-Simply plug into the existing
onboard power socket,and that’s it! Charges the battery on CAN Bus motorcycles even
when ignition is switched off.- Maintenance charging function and charge state LED - 5
m cable and Onboard power supply plug with 4 interchangeable plugs for EU, UK, USA
and AUS IN: 100-240 V; 50-60 Hz; 550mA & OUT: 12 V; 1.66A - Also suitable for many other
motorbikes with lead, lead gel and maintenance free batteries TIP: Can be used on your
motorbike, too, with our “onboard socket add-on kit with fuse”!
130-0014
Booster cable with startsafe® protection
The fully insulated clamps are ideal for bike battery terminals. With electronic safety
wiring against high inductive voltage peaks.
030-0166
Accessory socket
030-0012 without fuse to connect to a fused cable
030-0027 with fuse to connect directly to the battery for example
724
EQUIPMENT
Multi connection for battery
030-0163
Right angle USB charger
for DIN motorcycle socket
030-0165
Dual USB socket for motorbikes 12-24V, for 22 mm handlebar
USB tank bag cable
030-0065 USB-Adapter ZA
with right angle DIN connector
030-0157
030-0158
Tank bag power supply
DIN plug to cigarette lighter socket
030-0162
Auxiliaries socket
SPECIAL PARTS
DIN angle connector with screw connections
Mounting kit for cigarette
lighter socket
with fuse to connect directly to the batte-
with handlebar mounting, 22-28 mm
ry for example
030-0167
030-0023
725
Universal plug fits car cigarette lighter and BMW accessory socketl system univeral plug. Screw terminal
030-0011 Universal plug
Dual USB socket for motorbikes 12-24V, for 22 mm
handlebar
030-0029USB-Adapter
Adapter grippers for cigarette lighter socket
Remote control switch 1 x universal 4A/30V
030-0168
030-0170
Mini connector plugs in accessory socket
smallest design, with 1 solder + 1screw terminal
Battery master switch
030-0164
030-0112 Mini plug
has screw type terminals.
030-0111 Standard plug
screw type terminals
030-0113 LC plug
ABUS Granit Quick brake disc lock, yellow
601-0002Maxi
ABUS Granit 58 Black Loop, Lock-Chain Combination,
„Class SRA“
601-0007
726
EQUIPMENT
Grip-Lock throttle grip and brake lever lock
Grip-Lock is the smarter way of protecting your motorcycle from theft. It is mounted right
at the handlebar and locks both throttle grip and brake lever. Applying and removing the
Grip-Lock takes less than 10 seconds – a solution so quick, you will use it every time. GripLock is cleaner and easier to use than cumbersome and dirty chains and disk locks.
601-0008
Touratech tarpaulin cover for long-distance Enduros with cases
It is particularly difficult to find a high-quality and close-fitting tarpaulin cover for big
long-distance Enduro bikes. The super-soft Pelerine lining snuggles up to your treasured
motorbike, preventing paint scratches even if it is handled carelessly from the outside. This
tarpaulin is made of a breathable fabric, eliminating condensation that could in turn lead
to mould or corrosion.
Here‘s the best thing of all: the envelope is big enough for you to leave the side cases in
situ. Even your topcase can remain on your bike - the cover has a zip fastener that enables
you to enlarge it over this area.
601-0020Outdoor
601-0009
Indoor „Super Soft“
Paint protection foil 3M universal
300 x 200 mm, transparent
Tankpad „Touratech“
The practical Tankpad protects the tank from scratches.
Length: 16.5 cm
Width: 9 cm maximum, 5 cm minimum
600-0043black
600-0046orange
SPECIAL PARTS
101-0100
600-0047blue
600-0048red
Sticker set wheel ring made for adventure
Four pieces for each rim/side for easy application.
101-0440
17”/19“ white
101-0443
17“/21“ red
101-0441
17“/21“ white
101-0444
17“/19“ yellow
101-0442
17“/19“ red
101-0445
17“/21“ yellow
727
4-Stroke Motor Oils
CROSS POWER 4T
• Fully synthetic
• Off-road racing quality
• Viscosity and specifications: SAE 10W/50: JASO MA – API SL, SJ, SH, SG SAE 10W/60: JASO MA – API
SJ, SH, SG; KTM LC4 2007+
400-0174 (10W/50 - 1 litre) 400-0175 (10W/50 - 4 litres) 400-0176 (10W/60 - 1 litre) 400-0177 (10W/60 - 4 litres) TOP SPEED 4T 5W/40 MA2
• Synthetic performance
• Reduces oil consumption
• Viscosity and specifications: SAE 5W/40: JASO MA2 – API SN, SL, SJ
400-0216 (1 litres) 400-0217 (4 litres)
TOP SPEED 4T
• Synthetic performance
• For on-road and off-road use
• Viscosity and specifications:
• SAE 10W/30, 10W/40, 15W/50: JASO MA – API SL, SJ, SH, SG
400-0168 (10W/30 - 1 litre) 400-0169 (10W/30 - 4 litres) 400-0170 (10W/40 - 1 litre) 400-0171 (10W/40 - 4 litres) BOXER 4T 15W/50
• Synthetic performance
• Reduces oil consumption
• Viscosity and specifications: SAE 15W/50: JASO MA – API SL, SJ, SH, SG
400-0166 (1 litre) 400-0167 (4 litres) 728
EQUIPMENT
Specialities
BOXER 4T 5W/40 JASO MA2
• Synthetic performance
• Reduces oil consumption
• Viscosity and specifications: SAE 5W/40: JASO MA2 – API SN, SL, SJ
400-0218 (1 litre) 400-0219 (4 litres) KTM RACING 4T
• Fully synthetic
• Recommended by KTM Customer Racing
• Viscosity and specifications: SAE 20W/60; KTM RACE ENGINE, MX, SM, RALLY, ENDURO
400-0178 (1 litre)
400-0179 (4 litres)
2-Stroke Motor Oils
CROSS POWER 2T
• Fully synthetic
• Racing quality
• Reduces combustion residues
• For premix and separate lubrication
Fork Oils
RACING FORK OIL SAE 2.5W - 15W
• Prevents jerky motion (stick-slip)
• Fast fork response
• Care additive for seals
• Optimum damping at all temperatures
• Minimises foaming
• Inhibits corrosion and condensation
• Tested under the most extreme racing conditions
SPECIAL PARTS
400-0159 (1 litre)
400-0181 (2,5W)
400-0182 (5,0W) 400-0183 (7,5W) 400-0184 (10W) 400-0185 (15W) 1 litre sizes
729
Transmission Oils
GEAR OIL PRISMA ZX
for shaft drive and gearboxes
• Synthetic gear oil
• Excellent gear-changing performance
• Specifically for motorcycles with separately lubricated gearboxes shaft drives, hypoid gears)
• Viscosity and specifications: SAE 75W/90; API GL 4+5
400-0180 (1 litre) Brake Fluid – Coolant
BRAKE FLUID DOT 5.1
• Brake fluid with high wet boiling point (180 °C)
• Better performance at cold temperatures
• More sensitive response
• Specifications: FMVSS 116 DOT3/4/5.1
400-0192 (250 g) COOLANT M5.0 Ready To Use
Special coolant that meets the requirements of various manufacturers of modern, high-performance
engines.
Ready to use
•
Antifreeze protection down to -38 °C
•
Inhibits rust and corrosion
•
Free of nitrites, phosphates and amines
•
• Specifications: SAE J 1034 – ASTM 3306, 4656, BS 6580
400-0210 ( 1 litre)
Additives
SYSTEM GUARD
Cleans and dissolves deposits throughout the entire injection system.
• For two-stroke and four-stroke petrol engines with and without a catalytic converter
• Improves corrosion protection, binds water
400-0194 (125 ml)
FUEL STABILIZER
Indispensable when laying up your motorbike for winter.
Stabilises lead-free fuel and keeps it ignitable.
• For two-stroke and four-stroke petrol engines with and without a catalytic converter
• Prevents oxidation and the associated gumming and deposits
400-0193 (125 ml)
730
EQUIPMENT
Air Filter Maintenance
AIRFILTER CLEANING KIT
Contains all the essential equipment for professional air filter cleaning and care.
• Large bucket for cleaning
• Small bucket for oiling
• 4 l air filter cleaner
• 1 l air filter oil 206
• 100 g grease 2000 for sealing the filter element in the airbox
• Metal grid for draining
• Latex gloves
• 2 Motorex stickers
• Detailed instructions for professional oil filter cleaning
400-0186 (Airfilter Cleaning Kit)
400-0187 (1 l Airfilter Cleaner)
400-0188 (4 l Airfilter Cleaner)
400-0189 (1 l Airfilter Oil)
AIR FILTER OIL SPRAY
Specially developed air filter oil spray for foam air filter elements. Keeps out sand, dust and
water. Guaranteed optimal airflow. Very good adhesion.
Container size: 750 ml
400-0158 MOTOREX RACING BIO LIQUID POWER is an air filter oil that has been specially developed for
off-road motorcycles and quads (ATV) equipped with reusable foam air filters. This special,
biodegradable oil can absorb very large amounts of dust and dirt. Its active ingredients
ensure that any penetration of hazardous materials into the engine is prevented, even under
the toughest operating conditions.
Container size: 1000ml
400-0190
SPECIAL PARTS
BIO LIQUID POWER
Dirt Bio Remover
• Cleaner for foam air filters
• biologically degradable
• water-soluble powder
• developed in co-operation with Twin Air
• quickly dissolves even the most stubborn marks and dirt
Volume: 800g
400-0191
731
Clean and Care
MOTO CLEAN
Removes stubborn dirt such as insects and brake dust.
• Penetrates well
• Does not attack rubber, paint, chrome or plastic parts
• 360° spray mechanism even works upside down
• Completely biodegradable
Contents: 1 litre spray
400-0199 QUICK CLEANER
Quickly clean your motorbike without adding water – perfect for travelling!
• Water-repellent beading effect
• Anti-static
• For plastics, glass, paint, metals and windscreens
Small 60ml spray bottle, the ideal companion for the road.
400-0220 (500 ml) 400-0221 (60 ml)
MOTO SHINE
Special gloss spray for a perfect finish after car cleaning. For lasting shine on paint, plastic, chrome
etc. and creates a Protective antistatic film with drop-repellent effect.
• Perfect finish
• Drop-repellent effect
• Can be used on paint, plastic, chrome etc.
• Protective antistatic film
400-0222 (500 ml) MOTO PROTECT
Protective spray for the whole motorbike. Ideal protection for long periods of non-use. Maintains
and protects with a fine oil film for excellent corrosion protection. Do not apply to brake discs!
400-0223 (500 ml)
HELMET CARE
Cleaning and care foam for helmet interior padding and shells.
• Cleans and cares for shell, giving a perfect, polished shine
• Also cleans and deodorizes inner padding
• With anti-mist additive
400-0209 (200 ml) 732
EQUIPMENT
PROTEX
Effective and easy-to-apply textile and leather waterproofing.
• Highly effective, long-lasting protection against water and oil
• Suitable for leather, textiles and microfibres (e.g. Gore-Tex)
• Allows materials to breathe naturally
• Versatile: ideal for shoes, ski and bicycle wear, convertible tops, tents etc.
400-0208 (500 ml)
Polyvalent Spray
JOKER 440
• Universal spray
• Expels water
• Protects against corrosion
• Dielectric effect
• Cleans and cares for metals and plastics
400-0211 (500 ml) Chain Care
CHAIN CLEAN DEGREASER
Extremely effective chain degreaser for all types of motorcycles.
• Does not attack the seals
• Ideal for use before applying MOTOREX chain lube
400-0198 (500 ml) High-performance TEFLON® lubricant for motorcycle drive chains, ideal for racing use.
• White chain lubricant
• Excellent anti-wear protection
• Extremely water-repellent, resistant to spin and temperature stable
• Developed and tested for road use with our racing teams
The chain spray is also available in a refillable mini can for trips.
SPECIAL PARTS
CHAINLUBE RACING
400-0197 (500 ml)
CHAINLUBE OFF ROAD
Dirt and water-repellent chain lubricant, specially developed for off-road use.
• Colourless
• Water and dirt-repellent
• Reduces wear and extends the life of the chain
The chain spray is also available in a refillable mini can for daily use.
400-0195 (500 ml) 733
CHAINLUBE ROAD STRONG
Fling-resistant lubricant for drive chains on road-going motorcycles.
• White chain lubricant
• Excellent anti-wear protection
• The perfect companion for motorbikes up to 180 km/h
• Water-repellent / inhibits corrosion
The chain spray is also available in a refillable mini can for trips.
400-0196
(500 ml)
400-0212 (56 ml refillable mini pack (ready filled))
HKS chain lubricant
How the HKS chain lubricant works
At first it's thinner than water, creates a suction effect and gets into the smallest hollow spaces
- Creates a lasting, thick and absolutely waterproof lubricating film similar to a plastic coating
Lubricating film thickness is between 2 to 5 times thicker than normal Has a sealing effect (1);
prevents foreign bodies from getting into the chain, reduces wear Long-term lubricating effect, will
always stick Motorbike is ready for use after 3 to 5 minutes Chain does not need to be cleaned before
re-lubrification
Does not damage X or O rings
400-0206 HKS extreme spray can 300 ml
400-0207 HKS extreme (including applicator) 500 ml
HKS-R 2 component chain and rim cleaner
HKS-R creates optimum conditions for applying HKS lubrication for the first time. A 2 component
solution is necessary to ensure optimum chain cleaning.
Not only the dirt sticking on the outside but also the dirt inside the chain that destroys the chain and
can appear when sealing rings wear out must be
removed. It is also important that the cleaning agent is removed completely so
that the lubricating film will adhere afterwards.
Component 1 - CLEANER
Gently removes numerous layers of dirt from chains and rims
Component 2 - NEUTRALISER
“Attracts” and removes the chain- damaging dirt loosened by the cleaner
from the smallest hollow spaces and neutralises the cleaner Does not damage X or O rings, acid-free
- Makes the rim shine again, also suitable for chromium
400-0205 HKS-R spray can 2 x 300 ml
734
EQUIPMENT
Threadlocker 5 ml - Loctite® 243™
LOCTITE® 243™ is designed for the locking and sealing of threaded fasteners which require
normal disassembly with standard hand tools.
The product cures when confined in the absence of air between close fitting metal surfaces
and prevents loosening and leakage from shock and vibration. Volume: 5ml
070-1105
Cold Metal WS-360 repair paste
2-Component Epoxy Metal
This steel-filled glue has an extremely high adhesive force. It hardens quickly and can also
be applied to vertical surfaces. WS 360 is best suited to seal and fill tears, holes and leaks on
machine parts, tanks, containers, pumps, housings etc. – This special repair mass is multiapplicable in industry, trade and technology. Processing temperature: max. +300°C.
Weight: 56gr.
070-1101
Manufacturer specific tool kits by CruzTools
070-2101BMW
070-2104
Japanese and European motorcycles
070-2105KTM
„Tube Type“ levers
These levers are suitable for standard tube type rims
“Tubeless“ tyre levers
These levers are suitable for tubeless type rims
070-0291
Heat shield muffler, stainless steel
SPECIAL PARTS
070-0290
Avoid the meltdown - prevent bags and side panels from touching your bike‘s exhaust!
The heat shield by Touratech is the simple, lightweight, universal heat problem-solver for
virtually any motorcycle exhaust system.
• Rugged stainless steel construction
• Easy to install
• Fits virtually any motorcycle make/model
• Dimensions: 15 x 7 cm
• Stainless steel hose clamp up to 65 cm diameter
080-5055
735
Tyre pressure gauge
Handy tyre pressure gauge, metal housing. Needle reset adjustment by turning the dial.
• Utmost precision
• Reads up to 4 bar
• 90° angled head
• Very rugged
• Made in Europe (Germany)
• Claimed to be accurate to within 1% over the range
• Measures without pressure drop
070-0270
„MotoKit“ puncture repair kit
The Terra-S puncture repair kit is ideal for quickly repairing punctures on the go (suitable
for tubed or tubeless tyres).The kit is recommended by leading tyre manufacturers and
includes everything that is required for repairing punctures while you‘re touring. 2 CO2
canisters included.
The unique rubber solution gives a better seal that other puncture repair sprays, and the
new composition makes it much easier to remove from the rim than other rubber solutions. So there‘s no risk of dirty rims with tubeless tyres.
070-6002
Puncture repair kit „Stop&Go - Pocket Tire Plugger“
This revolutionary new device easily installs mushroom shaped rubber plugs into all tubeless tires while staying on the wheel. The Plugging device ‚drives‘ the plug into the hole
with a turning of the hex wrench. The plug expands under pressure to fill the punctured
area. A firm pull on the stem with your pliers seats the mushroom head on the inner wall
allowing no air to escape. This technology insures maximum reliability while reducing
your downtime in any situation. For tubeless tires only! Product Contents: Tire Plugging
Device, Nozzle, Probe Tool, Reamer/Rasp Tool, Hex Wrench, (15) Mushroom Plugs (5/16“
diameter shaft x 3/4“ length stem), Retractable Razor Knife, Extra Zip Lock Bag, Laminated
Instructions, Vinyl Zippered Pouch (19 x 9 x 2,5 cm)
070-6003
Extension for Touratech hand protectors GD
With this kit you can create enough distance between your
handlebars and hand protectors to enable you to use your
adjustable brake and clutch lever in the outermost position.
In a set for both left and right-hand side.
040-7306
736
EQUIPMENT
MOTORRAD tyre puncture repair kit
1 x patch No.07, 4 x patches No. 0, 1 x tube of vulcanising fluid 5 g, 1 x emery paper, 1 x instruction sheet
070-0282
TUBELESS tyre puncture repair kit
3 x super Sealastic repair plugs, 1 x tube of Special Cement BL 4 g, 1 x insertion tool, 1 x
folding knife, 1 x crayon, 3 x air cartridges (16 g each), 1 x cartridge adapter, 1 x cartridge
insulator and 1 x instruction sheet
070-0280
Cartrige pump AIRBUSTER CO2
The AIRBUSTER is the ultimate CO2 solution. The CO2 pump consists of an aluminium housing
with an integrated pressure control regulator to help user release just the right amount of
air. Dust protection cap keeps internals clean. Compatible with 16g and 24g threaded CO2
cartridges, SKS cartridges feature insulation protection.
Airbuster includes a replacement 16g cartridge and 2-point pump holder. Incl. water bottle
clip
070-0277
070-0288
2x CO2-Cartridges
There is no better pump! The Spaero Double Action pump offers all the features of a modern,
comfortable mini-pump. Slide-on T-type handle for optimal pumping force. Double-action
pump technology. Tyres are inflated with air by both pulling and pushing. Flexible hose attachment that pumps without damaging valves and has no loss of pressure. Dual pump head
for all types of valves. High volume per stroke, maximum pressure 5bar/73psi. Incl. water
bottle clip. Valve connector: fits all types of valves
Length: 241 mm
Max. pressure: 5 bar / 73 PSI
070-0997
SPECIAL PARTS
Air pump Spaero Double Action
Compressor AirMan Tour
You can use the AirMan Tour to inflate motorcycle and bicycle tyres.
In addition to its handy portable and lightweight design, its high performance air compressor
enables rapid inflation of tires.
070-6005
737
Download PDF
Similar pages