Product datasheet
TM3AQ4G
Characteristics
module TM3 - 4 analog outputs spring
Main
Range of product
Modicon TM3
Product or component type
Analog output module
Range compatibility
Modicon M221
Modicon M241
Modicon M251
Analogue output number
4
Analogue output type
4...20 mA current
0...20 mA current
0...10 V voltage
- 10...10 V voltage
Analogue input resolution
12 bits
11 bits + sign
Analogue output resolution
11 bits + sign
12 bits
LSB value
2.44 mV, analogue input: 0...10 V voltage
4.88 mV, analogue input: - 10...10 V voltage
4.88 µA, analogue input: 0...20 mA current
3.91 µA, analogue input: 4...20 mA current
Load type
Resistive
Load impedance ohmic
1 kOhm voltage
300 Ohm current
Stabilisation time
1 ms
Conversion time
1 ms + 1 ms per channel + 1 controller cycle time
Absolute accuracy error
+/- 0.2 % of full scale at 25 °C
+/- 1 % of full scale
Temperature drift
+/- 0.01 %FS/°C
Repeat accuracy
+/- 0.4 %FS
Non-linearity
+/- 0.2 %FS
Output ripple
20 mV
Cross talk
<= 1 LSB
[Us] rated supply voltage
24 V DC
Supply voltage limits
20.4...28.8 V
Type of cable
<= 30 m twisted shielded pairs cable for output circuit
Current consumption
40 mA at 5 V DC (no load) via bus connector
50 mA at 5 V DC (full load) via bus connector
50 mA at 24 V DC (no load) via external supply
125 mA at 24 V DC (full load) via external supply
Local signalling
1 LED green for PWR
Electrical connection
11 x 2.5 mm² removable spring terminal block with pitch 5.08 mm adjustment for
outputs and supply
Insulation
500 V AC between output and internal logic
1500 V AC between output and supply
Marking
CE
Surge withstand
1 kV for power supply with common mode protection conforming to EN/IEC 61000-45
0.5 kV for power supply with differential mode protection conforming to EN/IEC
61000-4-5
1 kV for output with common mode protection conforming to EN/IEC 61000-4-5
Mounting support
Top hat type TH35-15 rail conforming to IEC 60715
Top hat type TH35-7.5 rail conforming to IEC 60715
Plate or panel with fixing kit
Height
90 mm
Depth
70 mm
1/2
The information provided in this documentation contains general descriptions and/or technical characteristics of the performance of the products contained herein.
This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications.
It is the duty of any such user or integrator to perform the appropriate and complete risk analysis, evaluation and testing of the products with respect to the relevant specific application or use thereof.
Neither Schneider Electric Industries SAS nor any of its affiliates or subsidiaries shall be responsible or liable for misuse of the information contained herein.
Complementary
Width
23.6 mm
Product weight
0.1 kg
Environment
Standards
EN/IEC 61131-2
EN/IEC 61010-2-201
Resistance to electrostatic discharge
4 kV on contact conforming to EN/IEC 61000-4-2
8 kV in air conforming to EN/IEC 61000-4-2
Resistance to electromagnetic fields
10 V/m at 80 MHz...1 GHz conforming to EN/IEC 61000-4-3
3 V/m at 1.4 GHz...2 GHz conforming to EN/IEC 61000-4-3
1 V/m at 2 GHz...3 GHz conforming to EN/IEC 61000-4-3
Resistance to magnetic fields
30 A/m at 50...60 Hz conforming to EN/IEC 61000-4-8
Resistance to fast transients
1 kV I/O conforming to EN/IEC 61000-4-4
Resistance to conducted disturbances, induced by radio 10 V at 0.15...80 MHz conforming to EN/IEC 61000-4-6
frequency fields
3 V at spot frequency (2, 3, 4, 6.2, 8.2, 12.6, 16.5, 18.8, 22, 25 MHz) conforming to
Marine specification (LR, ABS, DNV, GL)
Electromagnetic emission
Radiated emissions, test level: 40 dBμV/m QP class A (10 m at 30...230 MHz)
conforming to EN/IEC 55011
Radiated emissions, test level: 47 dBμV/m QP class A (10 m at 230 MHz...1 GHz)
conforming to EN/IEC 55011
Immunity to microbreaks
10 ms
Ambient air temperature for operation
-10...55 °C (horizontal installation)
-10...35 °C (vertical installation)
Ambient air temperature for storage
-25...70 °C
Relative humidity
10...95 % without condensation in operation
10...95 % without condensation in storage
IP degree of protection
IP20
Pollution degree
2
Operating altitude
0...2000 m
Storage altitude
0...3000 m
Vibration resistance
3.5 mm at 5...8.4 Hz with DIN rail mounting support
3 gn at 8.4...150 Hz with DIN rail mounting support
Shock resistance
15 gn during 11 ms
2/2
Download PDF
Similar pages