GIGABIT
GIGABIT
Power Over
Ethernet
RoS
RoS
RuggedSwitch® RSG2100NC
eRSTP
eRSTP
TM
TM
19-Port Modular Managed Ethernet Switch with Gigabit Uplink Ports, 56-bit Encryption
eRSTP
ZPL eRSTP
TM
eRSTP
eRSTP
RoS
Zero-Packet-Loss™
ZPL
Zero-Packet-Loss™
eRSTP
Zero-Packet-Loss™
TM
ZPL
eRSTP
Zero-Packet-Loss™
ZPL
TM
TM
Rugged Operating
System™
Rugged Operating
System™
Rugged Operatin
System™
TM
Rugged Operatin
System™
Rugged Operating
System™
TM
Rugged Operating
System™
Rugged Operating
System™Environments
The RuggedSwitch® RSG2100NC is an industrially hardened,
RuggedRated™ for Reliability in Harsh
„„
fully managed, modular, Ethernet switch specifically designed to
Immunity to EMI and heavy electrical surges
zz
operate reliably in electrically harsh and climatically demanding
Zero-Packet-Loss™ Technology
zz
utility substation and industrial environments. The RSG2100NC’s
Meets IEEE 1613 (electric utility substations)
superior ruggedized hardware design coupled with the
Class 1 with copper ports orRugged
Class Operating
2 with all fiber ports
®
z
z
embedded
Rugged
Operating
System
(ROS
)
provides
improved
E
xceeds
IEC
61850-3
(electric
utility
substations)
System™
Zero-Packet-Loss™
Zero-Packet-Loss™
zz
system reliability and advanced cyber security and networking
Exceeds IEC 61800-3 (variable speed drive systems)
zz
features making it ideally suited for creating secure Ethernet
Exceeds IEC 61000-6-2 (generic industrial)
TM
zz
networks for mission-critical, real-time, control applications.
Exceeds
NEMA TS-2 (traffic control equipment)
„„
- 40°C to +85°C operating temperature (no fans)
The RSG2100NC’s modular flexibility offers 10BaseFL
„„
Conformal coated printed circuit boards
Rugged(optional)
Operating
/100BaseFX /1000BaseX fiber and 10/100/1000BaseTX copper
„„
18 AWG galvanized steel enclosure System™
port combinations. Optional front or rear mount connectors make
„„
Hazardous Location Certification: Class 1 Division 2
the RSG2100NC highly versatile for any application and can
Rugged Operating System (ROS®) Features
support multiple fiber connectors (ST, MTRJ, LC, SC) without
„„
Simple plug and play operation - automatic learning,
loss of port density. The RSG2100NC is packaged in a rugged
negotiation, and crossover detection
galvanized steel enclosure with industrial grade DIN, panel, or
„„
MSTP 802.1Q-2005 (formerly 802.1s)
19” rack-mount mounting options.
„„
RSTP (802.1w) and Enhanced Rapid Spanning
Tree (eRSTP™) network fault recovery (<5ms)
Features and Benefits
„„
Quality of Service (802.1p) for real-time traffic
„„
VLAN (802.1Q) with double tagging and GVRP support
Ethernet Ports
„„
Link aggregation (802.3ad)
„„
Up to 3-Gigabit Ethernet ports - copper and/or fiber
„„
IGMP Snooping for multicast filtering
„„
Up to 16-Fast Ethernet ports - copper and/or fiber
„„
Port Rate Limiting and Broadcast Storm Limiting
„„
2 port modules for tremendous flexibility
„„
Port configuration, status, statistics, mirroring, security
„„
Non-blocking, store and forward switching
„„
SNTP time synchronization (client and server)
„„
Supports many types of fiber (Multimode, singlemode,
„„
Industrial automation features (eg. Modbus)
bi-directional single strand)
„„
Management Tools
Long haul optics allow Gigabit distances up to 70km
„
„
„„
Web-based, Telnet, CLI management interfaces
Multiple connector types (ST, MTRJ, LC, SC)
„„
SNMP v1/v2/v3 (56-bit encryption)
Cyber Security Features
„„
Remote Monitoring (RMON)
„„
Multi-level user passwords
„„
Rich set of diagnostics with logging and alarms
„„
SSL (56-bit encryption)
„„
Universal Power Supply Options
Enable/disable ports, MAC based port security
„„
„„
Fully integrated, dual-redundant (optional) power supplies
Port based network access control (802.1x)
„„
„„
Universal high voltage range: 88-300VDC or 85-264VAC
VLAN (802.1Q) to segregate and secure network traffic
„„
„„
Popular low voltage ranges: 24VDC(10-36VDC),
R ADIUS centralized password management
„„
48VDC (36-72VDC)
SNMPv3 authentication and 56-bit encryption
„„
Screw or pluggable terminal blocks available
„„
Terminal blocks for reliable maintenance free connections
„„
RUGGEDCOM
CSA/UL 60950 safety approved to +85°C
ZPL
ZPL
eRSTP
ISO 9001
REGISTERED
www.RuggedCom.com
RuggedSwitch® RSG2100NC
1
RuggedSwitch® RSG2100NC
19-Port Modular Managed Ethernet Switch with Gigabit Uplink Ports, 56-bit Encryption
RuggedSwitch® RSG2100NC
Modularity:
XX
10 available slots
XX
Up to 16 Fast Ethernet ports & 3
Gigabit ports
XX
Dual and single port modules
Modularity (8x2)
Mounting Options
XX
Panel/Din Rail
Fast Ethernet Ports Types:
XX
up to 16 Fast Ethernet Ports
Modular HMI:
Gigabit Port Types:
XX
up to 3 Gigabit Ethernet Ports
XX
19” Rack Mount
XX
virtually any mix of fiber or
XX
10/100/1000 TX RJ45
XX
Front or Rear Mount
copper desired
XX
10/100TX RJ45
XX
10FL Multimode
XX
100FX Multimode
XX
100FX Singlemode
XX
1000SX Multimode
Integrated Power Supply
XX
Universal high-voltage range: 88-300VDC
or 85-264VAC
XX
Popular low voltage DC ranges: 24VDC
(10-36VDC), 48VDC (36-59VDC)
XX
Front or Rear Mount
XX
1000LX Singlemode
XX
Pluggable Optics (SFP and GBIC)
XX
SC, and LC
Operating Temperature
XX
- 40oC to +85 oC
XX
No Fans
Critical Alarm Relay
XX
Form-C contact ratings:
Max Voltage 250VAC,125VDC
Max Current 2A@250VAC,
0.15A@125VDC, 2A@30VDC
XX
True Dual Redundant Parallel Load Sharing
(Optional)
XX
Screw or pluggable terminal blocks
available
www.RuggedCom.com
RuggedSwitch® RSG2100NC
2
RuggedSwitch® RSG2100NC
19-Port Modular Managed Ethernet Switch with Gigabit Uplink Ports, 56-bit Encryption
ROS® Features
Cyber Security
Cyber security is an urgent issue in many industries where
advanced automation and communications networks play a
crucial role in mission critical applications and where high reliability
is of paramount importance. Key ROS features that address
security issues at the local area network level include:
®
„„
Passwords - Multi-level user passwords secures switch
against unauthorized configuration
„„
Enable/Disable Ports - Capability to disable ports so that
traffic can not pass
„„
802.1Q VLAN - Provides the ability to logically segregate
traffic between predefined ports on switches
„„
MAC Based Port Security - The ability to secure ports
on a switch so only specific Devices / MAC addresses can
communicate via that port
„„
802.1x Port Based Network Access Control - The ability to
lock down ports on a switch so that only authorized clients can
communicate via this port
„„
RADIUS - authentication service using MD5 hash and
providing centralized password management
„„
SNMPv3 - encrypted authentication access security and data
encryption (CBC-DES with 56-bit encryption key)
„„
Secure Socket Layer - Web-based management using SSL
with data encryption (56-bit encryption key)
„„
RSA – 1024 bit key for key management and key exchange
„„
TACACS+ - Terminal Access Control and Accounting Services
Client provides cleartext authentication and authorization
„„
Point to Point (PPP) - using CHAP (MD5 Hash)
authentication service
The ROS® cyber security features are included to help
address the various industry specific security standards such
as NERC CIP, ISA S99, AGA 12, IEC 62443, ISO 17799:2005
and PCSRF SPP-ICS.
Enhanced Rapid Spanning Tree Protocol (eRSTP™)
RuggedCom eRSTP™ allows the creation of fault-tolerant
ring and mesh Ethernet networks that incorporate redundant
links that are ‘pruned’ to prevent loops. eRSTP™ yields worstcase fault recovery1 of 5ms times the ‘bridge diameter’ and
allows rings of up to 160 switches. For example, a ring of ten
switches will have fault recovery times under 50ms. eRSTP™
implements both STP and RSTP to ensure interoperability with
commercial switches unlike other proprietary ‘ring’ solutions.
Quality of Service (IEEE 802.1p)
Some networking applications such as real-time control or VoIP
(voice over IP) require predictable arrival times for Ethernet frames.
Switches can introduce latency in times of heavy network traffic
due to the internal queues that buffer frames and then transmit
on a first come first serve basis. ROS supports ‘Class of Service’
in accordance with IEEE 802.1p that allows time critical traffic to
jump ahead to the front of the queue thus minimizing latency and
®
www.RuggedCom.com
reducing jitter to allow such demanding applications to
operate correctly. ROS allows priority classification by
port, tags, MAC address, and IP type of service (ToS).
®
A configurable “weighted fair queuing” algorithm controls how
frames are emptied from the queues.
VLAN (IEEE 802.1Q)
Virtual local area networks (VLAN) allow the segregation of a
physical network into separate logical networks with independent
broadcast domains. A measure of security is provided since
hosts can only access other hosts on the same VLAN and traffic
storms are isolated. ROS supports 802.1Q tagged Ethernet
frames and VLAN trunks. Port based classification allows legacy
devices to be assigned to the correct VLAN. GVRP support is
also provided to simplify the configuration of the switches on the
VLAN.
®
Link Aggregation (802.3ad)
The link aggregation feature provides the ability to aggregate
several Ethernet ports into one logical link (port trunk) with
higher bandwidth. This provides an inexpensive way to set up
a high speed backbone to improve network bandwidth. This
feature is also known as “port trunking”, “port bundling”, “port
teaming”, and “Ethernet trunk”.
IGMP Snooping
ROS uses IGMP snooping (Internet Group Management
Protocol v1&v2) to intelligently forward or filter multicast traffic
streams (e.g. MPEG video) to or from hosts on the network.
This reduces the load on network trunks and prevents packets
from being received on hosts that are not involved. ROS has
a very powerful implementation of IGMP snooping that:
®
®
„„
Can be enabled on a per VLAN basis.
„„
Detects and filters all multicast streams regardless of whether
subscribers exist.
„„
Supports “router-less” operation by supporting an “active” mode.
„„
Restores traffic streams immediately after an RSTP
topology change.
SNMP (Simple Network Management Protocol)
SNMP provides a standardized method for network
management stations the ability to interrogate devices from
different vendors. SNMP versions supported by ROS are v1,
v2c, and v3. SNMPv3 in particular provides security features
®
such as authentication, privacy with data encryption (CBC-DES
with 56-bit encryption key) and access control not present in
earlier SNMP versions. ROS also supports numerous standard
®
MIBs (Management Information Base) allowing for easy
integration with any network management system (NMS).
1 eRSTP™ fault recovery times may be approximated as follows:
For 100 Mbps, fault recovery performance is <5ms/hop
For 1,000 Mbps, fault recovery performance is <5ms/hop + 20ms
RuggedSwitch® RSG2100NC
3
RuggedSwitch® RSG2100NC
19-Port Modular Managed Ethernet Switch with Gigabit Uplink Ports, 56-bit Encryption
ROS® Features
SNMP (Simple Network Management Protocol) (cont’d)
A feature of SNMP supported by ROS is the ability to generate
“traps” upon system events. RuggedNMS™, the RuggedCom
management solution, can record traps from multiple devices
providing a powerful network troubleshooting tool. It also
provides a graphical visualization of the network and is fully
integrated with all RuggedCom products.
®
SNTP (Simple Network Time Protocol)
SNTP automatically synchronizes the internal clock of all ROS®
devices on the network. This allows for correlation of time
stamped events for troubleshooting.
SCADA and Industrial Automation
ROS® contains features that optimize network performance and
simplify switch management based on the unique requirements
found in SCADA and industrial automation applications. Features
such as Modbus TCP management for retrieval of switch data
using the ubiquitous Modbus protocol and DHCP Option 82,
a Rockwell Automation ODVA requirement for IP address
assignment based on the location of the end device, provide
capabilities not found in typical “commercial” or “office grade”
Ethernet switches.
Port Mirroring
ROS® can be configured to duplicate all traffic on one port to a
designated mirror port. When combined with a network analyzer,
this can be a powerful troubleshooting tool.
Port Configuration and Status
ROS® allows individual ports to be ‘hard’ configured for speed,
duplex, auto-negotiation, flow control and more. This allows
proper connection with devices that do not negotiate or have
unusual settings. Detailed status of ports with alarm and SNMP
trap on link problems aid greatly in system troubleshooting.
Port Statistics and RMON (Remote Monitoring)
ROS® provides continuously updating statistics per port that
provide both ingress and egress packet and byte counters
as well as detailed error figures. Also provided is full support
for the RMON statistics, history, alarms, and event groups.
RMON allows for very sophisticated data collection, analysis
and detection of traffic patterns.
Event Logging and Alarms
ROS® supports the IEEE 802.1x standard that defines a
mechanism for port-based network access control which
provides a means of authenticating and authorizing devices
attached to LAN ports.
ROS® records all significant events to a non-volatile system
log allowing forensic troubleshooting. Events include link
failure and recovery, unauthorized access, broadcast
storm detection, and self-test diagnostics among others.
Alarms provide a snapshot of recent events that have yet to
be acknowledged by the network administrator. An external
hardware relay is de-energized during the presence of critical
alarms allowing an external controller to react if desired.
Port Rate Limiting
HTML Web Browser and Telnet User Interfaces
Port Based Network Access Control (802.1x)
ROS® supports configurable rate limiting per port to limit unicast
and multicast traffic. This can be essential to managing precious
network bandwidth for service providers. It also provides edge
security for denial of service (DoS) attacks.
Broadcast Storm Filtering
Broadcast storms wreak havoc on a network and can cause
attached devices to malfunction. This could be disastrous on
a network with mission critical equipment. ROS ® limits this by
filtering broadcast frames with a user-defined threshold.
Loss of Link Management
Some intelligent electronic devices (IEDs) have dual fiber
optic ports with automatic failover to a backup port should
the primary fail. ROS® ensures this mechanism works reliably
under all failure modes by appropriately disabling link signals
when required. ROS® also flushes learned MAC addresses to
ensure the failover occurs quickly.
www.RuggedCom.com
ROS® provides a simple, intuitive user interface for configuration
and monitoring via a standard graphical web browser or via
Telnet. All system parameters include detailed on-line help to
make setup a breeze. ROS®, presents a common look and feel
and standardized configuration process allowing easy migration
to other RuggedCom managed products.
Configuration via ASCII Text File
All configuration parameters are stored in an ASCII formatted
text file that can easily be transferred via TFTP or Xmodem.
The configuration file can be saved for backup purposes and
easily manipulated by a text editor. The same text file can be
downloaded to the switch at a later date in order to re-configure
or restore a previous configuration.
Command Line Interface (CLI)
A command line interface can be used in conjunction with
remote shell to automate data retrieval, configuration updates,
and firmware upgrades. A powerful SQL-like capability allows
expert users the ability to selectively retrieve or manipulate
any parameters the device has to offer.
RuggedSwitch® RSG2100NC
4
RuggedSwitch® RSG2100NC
19-Port Modular Managed Ethernet Switch with Gigabit Uplink Ports, 56-bit Encryption
EMI and Environmental Type Tests
IEC 61850-3 EMI TYPE TESTS
TEST
Description
IEC 61000-4-2
ESD
IEC 61000-4-3
Radiated RFI
Test Levels
Enclosure Contact
Enclosure Air
Enclosure ports
Signal ports
IEC 61000-4-4
Burst (Fast Transient)
IEC 61000-4-6
IEC 61000-4-8
IEC 61000-4-29
Induced (Conducted) RFI
8 Magnetic Field
4
A.C. Power ports
+/- 4kV
4
IEC 61000-4-12
10V
3
10V
3
A.C. Power ports
10V
3
Earth ground ports
10V
A.C. Power ports
Signal ports
D.C. Power ports
A.C. Power ports
Signal ports
D.C. Power ports
D.C. Power ports
Signal ports
D.C. Power ports
A.C. Power ports
Signal ports
D.C. Power ports
A.C. Power ports
Damped Oscillatory
IEC 61000-4-16
Mains Frequency Voltage
IEC 61000-4-17
Ripple on D.C. Power Supply
IEC 60255-5
Dielectric Strength
IEC 60255-5
H.V. Impulse
4
4
3
4
Signal ports
D.C. Power ports
IEC 61000-4-11
+/- 4kV
+/- 4kV line-to-earth, +/- 2kV line-to-line
+/- 2kV line-to-earth, +/- 1kV line-to-line
+/- 4kV line-to-earth, +/- 2kV line-to-line
D.C Power ports
Enclosure ports
Voltage Dips & Interrupts
Note 1
+/- 4kV
Signal ports
D.C. Power ports
A.C. Power ports
Surge
+/- 4kV @ 2.5kHz
D.C. Power ports
Earth ground ports
IEC 61000-4-5
Severity Levels
4
4
Note 1
+/- 8kV
+/- 15kV
20 V/m
3
40 A/m continuous, 1000 A/m for 1 s
1000 A/m for 1 s
Note 1
5
30% for 0.1s, 60% for 0.1s, 100% for 0.05s
N/A
30% for 1 period, 60% for 50 periods
N/A
100% for 5 periods, 100% for 50 periods
N/A
2.5kV common, 1kV diff. mode@1MHz
2.5kV common, 1kV diff. mode@1MHz
2.5kV common, 1kV diff. mode@1MHz
30V Continuous, 300V for 1s
30V Continuous, 300V for 1s
10%
2kVac (Fail-Safe Relay output)
1.5kV DC
2kVac
5kV (Fail-Safe Relay output)
5kV
5kV
3
3
3
4
4
3
N/A
N/A
N/A
N/A
N/A
N/A
IEEE 1613 (C37.90.x) EMI IMMUNITY TYPE TESTS 2
Test
Description
IEEE C37.90.3
ESD
IEEE C37.90.2
Radiated RFI
IEEE C37.90.1
Fast Transient
IEEE C37.90.1
Oscillatory
IEEE C37.90
H.V. Impulse
IEEE C37.90
Dielectric Strength
Enclosure Contact
Enclosure Air
Enclosure ports
Signal ports
D.C. Power ports
A.C. Power ports
Earth ground ports3
Signal ports
D.C. Power ports
A.C. Power ports
Signal ports
D.C. Power ports
A.C. Power ports
Signal ports
D.C. Power ports
A.C. Power ports
Test Levels
+/-2kV, +/-4kV, +/- 8kV
+/-4kV, +/-8kV, +/-15kV
35 V/m
+/- 4kV @ 2.5kHz
+/- 4kV
+/- 4kV
+/- 4kV
2.5kV common mode @1MHz
2.5kV common, 1kV diff. mode@1MHz
2.5kV common, 1kV diff. mode@1MHz
5kV (Fail-Safe Relay output)
5kV
5kV
2kVac
1.5kV DC
2kVac
Environmental Type Tests
Test
IEC 60068-2-1
Cold Temperature
Test Ad
Test Levels
-40°C, 16 Hours
IEC 60068-2-2
Dry Heat
Test Bd
+85°C, 16 Hours
IEC 60068-2-30
Humidity (Damp Heat, Cyclic)
Test Db
95% (non-condensing), 55°C , 6 cycles
IEC 60255-21-1
IEC 60255-21-2
www.RuggedCom.com
Description
Vibration
Shock
2g @ (10 - 150) Hz
30g @ 11mS
RuggedSwitch® RSG2100NC
5
RuggedSwitch® RSG2100NC
19-Port Modular Managed Ethernet Switch with Gigabit Uplink Ports, 56-bit Encryption
Technical Specifications
Power Supply
„„
P
ower Consumption: 28W Max
„„
2
4VDC: 10-36 VDC, 1.2A
„„
4
8VDC: 36-72 VDC, 0.6A
„„
H
I Voltage AC/DC: 88-300VDC or 85-264VAC
Critical Alarm Relay
„„
F
orm-C contact ratings:
„„
Max Voltage 250VAC,125VDC
„„
Max Current 2A@250VAC, 0.15A @125VDC,
„„
2 A@30VDC
Physical
„„
H
eight: 4.42cm / 1.74”
„„
W
idth: 46.48cm / 18.3”
„„
D
epth: 31.5cm / 12.4”
„„
W
eight: 5.2kg / 11.5 lbs
„„
I
ngress Protection: IP40 (1mm objects)
„„
E
nclosure: 18 AWG galvanized steel enclosure
„„
M
ounting: DIN rail or panel mounted
Switch Properties
„„
S
witching method: Store & Forward
„„
S
witching latency: 7 us
„„
S
witching bandwidth: 9.2 Gbps
„„
M
AC addresses: 8192
„„
MAC address table size: 64kbytes
„„
P
riority Queues: 4
„„
F
rame buffer memory: 2 Mbit
„„
S
imultaneous VLANs: 255
„„
V
LAN ID Range: 1 to 4094
„„
I
GMP multicast groups: 256
„„
P
ort rate limiting
„„
N
o head of line blocking
Approvals
„„
I
SO: Designed and manufactured using a ISO9001: 2000
certified quality program
„„
C
E Marking
„„
E
missions: FCC Part 15 (Class A),
EN55022 (CISPR22 Class A)
„„
S
afety: cCSAus (Compliant with CSA C22.2 No. 60950, UL
60950, EN60950)
„„
L
aser Eye Safety (FDA/CDRH): Complies with 21
CFR Chapter1, Subchapter J.
„„
H
azardous Locations: Class 1 Division 2
Network Management
„„
HTTP graphical web-based, SSL (56-bit encryption)
„„
SNMP v1, v2c, v3 (56-bit encryption)
„„
Telnet, VT100, TFTP
„„
Command Line Interface (CLI)
„„
RSA Key Management (1024 bit key)
„„
Authentication and Accounting - TACACS+ (cleartext),
RADIUS client, PPP
www.RuggedCom.com
Warranty
„„
5 Years - Applicable to design and manufacturing
related product defects.
EMI Immunity and Environmental Compliance
„„
IEC 61000-6-2 Industrial (Generic)
„„
IEC 61800-3 Industrial (Variable Speed Drive Systems)
„„
IEC 61850-3 Electric Utility Substations
„„
IEEE 1613 Electric Utility Substations
„„
NEMA TS 2 Traffic Control Equipment
IEEE Compliance
„„
802.3-10BaseT
„„
802.3u-100BaseTX, 100BaseFX
„„
802.3x-Flow Control
„„
802.3z-1000BaseLX
„„
802.3ab-1000BaseTX
„„
802.3ad-Link Aggregation
„„
802.1D-MAC Bridges
„„
802.1D-Spanning Tree Protocol
„„
802.1p-Class of Service
„„
802.1Q-VLAN Tagging
„„
802.1w-Rapid Spanning Tree Protocol
„„
802.1x-Port Based Network Access Control
„„
802.1Q-2005 (formerly 802.1s) MSTP
IETF RFC Compliance
„„
RFC768-UDP
„„
RFC783-TFTP
„„
RFC791-IP
„„
RFC792-ICMP
„„
RFC793-TCP
„„
RFC826-ARP
„„
RFC854-Telnet
„„
RFC894-IP over Ethernet
„„
RFC1112-IGMP v1
„„
RFC1519-CIDR
„„
RFC1541-DHCP (client)
„„
RFC2030-SNTP
„„
RFC2068-HTTP
„„
RFC2236-IGMP v2
„„
RFC2284-EAP
„„
RFC2475-Differentiated Services
„„
RFC2865-RADIUS
„„
RFC3414-SNMPv3-USM
„„
RFC3415-SNMPv3-VACM
IETF SNMP MIBS
„„
RFC1493-BRIDGE-MIB
„„
RFC1907-SNMPv2-MIB
„„
RFC2012-TCP-MIB
„„
RFC2013-UDP-MIB
„„
RFC2578-SNMPv2-SMI
„„
RFC2579-SNMPv2-TC
„„
RFC2819-RMON-MIB
„„
RFC2863-IF-MIB
„„
Draft-ietf-bridge-rstpmib-03-BRIDGE-MIB
„„
Draft-ietf-bridge-bridgemib-smiv2-03-RSTP-MIB
„„
IANAifType-MIB
RuggedSwitch® RSG2100NC
6
RuggedSwitch® RSG2100NC
19-Port Modular Managed Ethernet Switch with Gigabit Uplink Ports, 56-bit Encryption
Dimensions
www.RuggedCom.com
RuggedSwitch® RSG2100NC
7
RuggedSwitch® RSG2100NC
19-Port Modular Managed Ethernet Switch with Gigabit Uplink Ports, 56-bit Encryption
Mounting Options
www.RuggedCom.com
Slot 1
Slot 3
Slot 5
Slot 7
Slot 9
Slot 2
Slot 4
Slot 6
Slot 8
Slot 10
RuggedSwitch® RSG2100NC
8
RuggedSwitch® RSG2100NC
19-Port Modular Managed Ethernet Switch with Gigabit Uplink Ports, 56-bit Encryption
Order Codes
RSG2100NC - ____ - _____ - ____ - ____ - ___ - ___ - ___ - ___ - ___ - ___ - ___ - ___ - ___ - ___ - _____
Main Mount PS1 PS2 S1 S2 S3 S4 S5 S6 S7 S8 S9 S10 MOD
Slot 1
Slot 3
Slot 5
Slot 7
Slot 9
Slot 2
Slot 4
Slot 6
Slot 8
Slot 10
Main: Ethernet and Power Connectors
„„
R = Ethernet on rear; LED panel on front; power connector on rear
„„
F = Ethernet on front; LED panel on front; power connector on rear
„„
B = Ethernet on rear; LED panel on top; power connector on rear
„„
T = Ethernet on front; LED panel on top; power connector on rear
Mount: Mounting Options
„„
RM = 19” Rack Mount Kit
„„
DP = DIN and Panel Mount Kit
„„
RD = 19” Rack, DIN, and Panel Mount Kit
„„
00 = No Mounting Option
PS1 and PS2: Power Supply 1 and 2(5)
„„
24 = 24VDC (10-36VDC), screw terminal block
„„
48 = 48VDC (36-72VDC), screw terminal block
„„
HI = 88-300VDC or 85-264VAC, screw terminal block
„„
24P = 24VDC (10-36VDC), pluggable terminal block
„„
48P = 48VDC (36-72VDC), pluggable terminal block
„„
HIP = 88-300VDC or 85-264VAC, pluggable terminal block
„„
X X = No Power Supply (PS2 Only)
S1, S2, S3, S4, S7, S8, S9 and S10:
Ethernet Modules for Slots 1, 2, 3, 4, 7, 8, 9 and 10
„„
X XXX = Empty
„„
T X01 = 2 x 10/100Tx RJ45
„„
FL01 = 2 x 10FL - Multimode, 850nm, ST
„„
FX01 = 2 x 100FX - Multimode, 1300nm, ST
„„
FX02 = 2 x 100FX - Multimode, 1300nm, SC
„„
FX11 = 2 x 100FX – Multimode, 1300nm, LC
„„
FX03 = 2 x 100FX - Multimode, 1300nm, MTRJ
„„
FX04 = 2 x 100FX - Singlemode, 1310nm, ST, 20km
„„
FX05 = 2 x 100FX - Singlemode, 1310nm, SC, 20km
„„
FX06 = 2 x 100FX - Singlemode, 1310nm, LC, 20km
„„
FX07 = 2 x 100FX - Singlemode, 1310nm, SC, 50km
„„
FX08 = 2 x 100FX - Singlemode, 1310nm, LC, 50km
„„
FX09 = 2 x 100FX - Singlemode, 1310nm, SC, 90km
„„
FX10 = 2 x 100FX - Singlemode, 1310nm, LC, 90km
„„
FG52 = 2 x 1000LX SFP - Singlemode, 1310nm, LC, 10km(3)
„„
FG53 = 2 x 1000LX SFP - Singlemode, 1310nm, LC, 25km(3)
„„
FG54 = 2 x 1000LX SFP - Singlemode, 1550nm, LC, 70km(2)(3)
„„
FG70 = 2 x 1000LX GBIC - Blank (no optical transceiver)
„„
FG71 = 2 x 1000LX GBIC - Singlemode, 1310nm, SC, 10km(4)
„„
FG72 = 2 x 1000LX GBIC - Singlemode, 1310nm, SC, 25km (4)
„„
FG73 = 2 x 1000LX GBIC - Singlemode, 1550nm, SC, 70km(2)(4)
S6: Gigabit Ethernet Modules for slot 6
„„
X XXXX = Empty
„„
1CG01 = 1 x 10/100/1000Tx RJ45
„„
1FG01 = 1 x 1000SX - Multimode, 850nm, LC, 500m
„„
1FG02 = 1 x 1000LX - Singlemode, 1310nm, SC connectors, 10km
„„
1FG03 = 1 x 1000LX - Singlemode, 1310nm, LC connectors, 10km
„„
1FG04 = 1 x 1000LX - Singlemode, 1310nm, SC connectors, 25km
„„
1FG05 = 1 x 1000LX - Singlemode, 1310nm, LC connectors, 25km
„„
1FG50 = 1 x 1000SX SFP - Blank (no optical transceiver)
„„
1FG51 = 1 x 1000SX SFP - Multimode, 850nm,LC, 500m (3)
„„
1FG52 = 1 x 1000LX SFP - Singlemode, 1310nm, LC,10km (3)
„„
1FG53 = ­­1 x 1000LX SFP - Singlemode, 1310nm, LC, 25km (3)
„„
1FG54 = 1 x 1000LX SFP - Singlemode, 1550nm, LC, 70km (2)(3)
„„
1FG70 = 1 x 1000LX GBIC - Blank (no optical transceiver)
„„
1FG71 = 1 x 1000LX GBIC - Singlemode, 1310nm, SC, 10km (4)
„„
1FG72 = 1 x 1000LX GBIC - Singlemode, 1310nm, SC, 25km (4)
„„
1FG73 = 1 x 1000LX GBIC - Singlemode, 1550nm, SC, 70km (2)(4)
MOD: Manufacturing Modifications
„„
XX = None
„„
C01 = Conformal Coating
Notes:
1 Distance ratings are typical but will depend on type of cabling, number of connectors and splices.
2 These
transceivers have an operating temperature range of -20 °C to +85°C.
All other transceivers have an operating temperature range of -40°C to +85°C
3S
FP plugable optics that consist of a blank cage (FG50 for dual, 1FG50 for single)
plus specified fiber optic interface(s) installed
4G
BIC plugable optics that consist of a blank cage (FG70 for dual, 1FG70 for single)
plus specified fiber optic interface(s) installed
5 Power Supply 1 and 2 must be either both screw terminal block or both pluggable terminal block
S5: Gigabit Ethernet Modules for slot 5
„„
X XXX = Empty
„„
CG01 = 2 x 10/100/1000Tx RJ45
„„
FG01 = 2 x 1000SX - Multimode, 850nm, LC, 500m
„„
FG02 = 2 x 1000LX - Singlemode, 1310nm, SC connectors, 10km
„„
FG03 = 2 x 1000LX - Singlemode, 1310nm, LC connectors, 10km
„„
FG04 = 2 x 1000LX - Singlemode, 1310nm, SC connectors, 25km
„„
FG05 = 2 x 1000LX - Singlemode, 1310nm, LC connectors, 25km
„„
FG50 = 2 x 1000LX SFP - Blank (no optical transceiver)
„„
FG51 = 2 x 1000SX SFP - Multimode, 850nm, LC, 500m(3)
www.RuggedCom.com
RuggedSwitch® RSG2100NC
9
RuggedSwitch® RSG2100NC
19-Port Modular Managed Ethernet Switch with Gigabit Uplink Ports, 56-bit Encryption
Example Order Codes:
RSG2100NC-R-RM-24-48-TX01-TX01-XXXX-XXXX-XXXXXXXXX-XXXX-XXXX-XXXX-XXXX-XX
19” Rack mounted, 24VDC power supply, 48VDC power supply,
4 10/100 RJ45 Ethernet Ports, with Ethernet ports on the rear.
RSG2100NC-F-RM-48-48-TX01-TX01-FX01-FX01-XXXXXXXXX-XXXX-XXXX-XXXX-XXXX-XX
19” Rack mounted, 48VDC power supply, 48VDC, 4 10/100 RJ45
Ethernet Ports, 4 100FX (Multi Mode 1300nm Fiber) Ethernet
ports, with Ethernet ports on the front.
RSG2100NC-R-RM-HI-HI-TX01-TX01-FX01-FX01-FG02XXXXX-FX01-FX01-FX01-FX01-C01
19” Rack mounted, HI power supply, HI power supply, 4 10/100
RJ45 Ethernet Ports, 12 100FX (Multi Mode 1300nm Fiber)
Ethernet ports, 2 1000LX (Gigabit) Ethernet ports, with Ethernet
ports on the front, conformal coating.
Accessories/Options
41-11-0011 - Cable support bracket (one)
43-10-0007 - Power cable
(North America three prong connector -> beau)
www.RuggedCom.com
RuggedSwitch® RSG2100NC
10
RuggedSwitch® RSG2100NC
19-Port Modular Managed Ethernet Switch with Gigabit Uplink Ports, 56-bit Encryption
RuggedCom Inc.
300 Applewood Crescent, Unit 1,
Concord, Ontario, Canada L4K 5C7
Tel: +1 (905) 856-5288 Fax: +1 (905) 856-1995
Toll Free: 1 (888) 264-0006
Technical Support Center
Toll Free (USA & Canada): 1 (866) 922-7975
International: +1 (905) 856-5288
USA: +1 (954) 922-7975
E-mail: Support@RuggedCom.com
© 2010 RuggedCom Inc.
RuggedSwitch is a registered trademark of RuggedCom Inc.
Ethernet is a trademark of the Xerox Corporation.
Patent Pending
All specifications in this document are subject to change without notice.
Rev 3b — 04/27/10
www.RuggedCom.com
For additional information on our products and services, please
visit our web site at: www.RuggedCom.com
RuggedSwitch® RSG2100NC
11
Download PDF
Similar pages