02 thru –32 –02 thru –36 IDM IDS .100"

F-208
IDMD–28–S–12.00–G
.100"(2,54mm) IDC CABLE
SPECIFICATIONS
Mates with:
TSW, MTSW, TSM, EJH
IDSS, IDSD
TYPE
STRIP
ROW
OPTION
For complete specifications
see www.samtec.com?IDSS
or www.samtec.com?IDSD
Insulator Material:
Black Glass Filled
Polyester
Plating:
Au over 50µ" (1,27µm) Ni or
Sn over 100µ" (2,54µm) Cu or
50µ" (1,27µm) Ni
Wire:
28 AWG 7/36 stranded Tinned
Copper
Temperature Range:
-20°C to +105°C
(Rainbow Cable)
-40°C to +105°C
(Gray Cable)
Contact:
BeCu
Current Rating:
1A
Contact Resistance:
10 mΩ max
Lead Size Range:
(0,56mm) .022" SQ to
(0,71mm) .028" SQ
Lead Insertion Depth:
(5,59mm) .220" to
(6,22mm) .245"
Insertion Force:
(Single contact only)
4oz avg.
((0,64mm) .025" SQ probe)
Withdrawal Force:
(Single contact only)
3oz avg.
((0,64mm) .025" SQ probe)
RoHS Compliant: Yes
SPECIFICATIONS
IDMS, IDMD
For complete specifications
see www.samtec.com?IDMS
or www.samtec.com?IDMD
Insulator Material:
Black Glass Filled
Polyester
Plating:
Au over 50µ" (1,27µm) Ni or
Sn over 100µ" (2,54µm) Cu
or 50µ" (1,27µm) Ni
Wire:
28 AWG 7/36 stranded
Tinned Copper
Temperature Range:
-20°C to +105°C
(Rainbow Cable)
-40°C to +105°C
(Gray Cable)
Terminal:
Phosphor Bronze
Current Rating:
1A
RoHS Compliant:
Yes
Note:
This Series is non-standard,
non-returnable.
IDMS, IDMD, IDSS
& IDSD SERIES
NO. PINS
PER ROW
S
END
ASSEMBLY
–S = Single
End
= Single
D
= Double
(Color coded
cable N/A for
31 thru 36
pins/row.
See –G
option.)
IDM
= Standard Tail Male Plug
IDS
= Socket
Socket or Male Plug
on one end
–D = Double
End
–02 thru –32
DOUBLE
Full size (64 positions):
(82,55) 3.250
Less than 64 positions:
No. Positions/row X (2,54) .100 + (1,68) .066
IDMD
(Double)
IDMS
(Single)
SINGLE
Full size (32 positions):
(81,53) 3.210
Less than 32 positions:
No. Positions/row X (2,54) .100 + (0,71) .028
(2,54)
.100
(5,08)
.200
(6,10)
.240
MAX
(0,48)
.019
(0,46)
.018
x
(0,48)
.019
Socket or Male Plug
on each end
–T = Transfer
End
(3,18)
.125
(2,54)
.100
(2,54)
.100
(For square or long tail see HCMX Series)
Male Plug on one end with
socket on other. Begin part
number with IDM.
–02 thru –36
DOUBLE
Full size (72 positions):
(91,71) 3.650
Less than 72 positions:
No. Positions/row x (2,54) .100 + (1,50) .059
SINGLE
Full size (36 positions):
(91,69) 3.610
Less than 36 positions:
No. Positions/row x (2,54) .100 + (0,48) .019
IDSS
(Single)
IDSD
(Double)
EJECTOR HEADER
(5,08)
.200
(9,27)
.365
REF
See EJH Series.
(2,54)
.100
(0,76)
.030
SQ
WWW.SAMTEC.COM
(2,54)
.100
IDSD–06–D–05.00–S02
IDSD–29–S–05.00
ASSEMBLED
LENGTH
OPTION
ALSO AVAILABLE
Molded-To-Position
IDC Assembles
– “XX.XX”
POLARIZING KEY
= Assembled Length
(0,64) .025
SQ
Assembled Length in
INCHES (1/8" )
(2 inches minimum)
(5,84)
.230
•
•
•
•
•
Optional polarizing key for
use with IDSS & IDSD
Series. Also polarizes
SSW, SSQ, ESW & ESQ
Series. Black High
Temperature Thermoplastic
Order: Part Number PK-01-06
Plating
–T = Tin
(Both ends)
Tin IDM
(0,25µm) Gold IDS
–C = 10µ"
(-T End Assembly Required)
Low Profile
Skinny side locks
Dual beam contacts
Single and double row
(6,35mm) .025" square
and (5,84mm) .230" length
tail available
Call Samtec for
HCXX Series.
–ST “X”
–S “XX”
–R
= Stripped & Tinned
= Daisy Chain Single
= Reversed
Specify Suffix from table.
All dimensions are ± 1/16".
Not available in 28 positions and higher.
“XX” ± 1⁄8"
2"
min.
Single Row
Connectors
(IDSS)
(0,25µm) Gold IDM
–A = 10µ"
Tin IDS
(-T End Assembly Required)
Standard plating is selective
gold over BeCu contact for IDS;
Selective gold over phosphor
bronze for IDM.
Outer Most
4" minimum
1
–P “XX”
=Polarized
72
04
–ST8
–ST4
–ST2
–ST3
1/8" (3,18)
1/4" (6,35)
1/2" (12,70)
3/8" (9,53)
4
02
Specify “XX” as position. For
Double the same position will
be polarized on both ends.
(Not available on IDM or EDM,
unless transfer, then only the
socket is polarized.)
“XX” ± 1⁄8"
Specify “XX” as number of
conductors to be broken out.
01
–M
= Middle Reversed
7
= Daisy Chain, Double
= Breakout
03
8
–D “XX”
–B “XX”
71
When mating double row
connector with two single row
connectors, the outer most
single will be connected to
Conductor #1 and the inside
single to Conductor #2.
2"
min.
Double Row
Connectors
(IDSD or
IDMD)
Requires –SXX, –WXX or –DXX
8
Outer Most
–O
“XX”
2
= Outside Reversed
4" minimum
7
–G
= Gray Cable
Specify –G for Gray cable. Gray
cable has one red edge. IDSS
and IDMS uses .100" centerline
cable. IDSD and IDMD uses
.050" centerline cable. Cable is
28 AWG 7/36 copper wire.
Standard cable is same as
above except color coded.
3
5"max.
2"min.
Breakout starts with Number 1
lead indicated by brown wire or
red stripe. Shown on top side.
–W “XX”
= Wiring Reversed
Daisy Chain, Single
5
–RW
Same as –S “XX” except outer
strip connected to Conductor
#2 and inside strip connected
to Conductor #1.
= Reversed Wiring
#1 wire opposite position #1.
6
WWW.SAMTEC.COM
Requires –SXX, –WXX or –DXX
7
8
Download PDF
Similar pages