residential - Thermal Associates

RESIDENTIAL
R-410A Refrigerant
Single Speed: 2-6 Tons
Dual Capacity: 2-6 Tons
Submittal Data
English Language/IP Units
SD1585 10/08
Contractor:
Engineer:
ENVISION Residential Series
2-6 Tons 60Hz
P.O.:
Project Name:
Unit Tag:
Model Nomenclature
N
D
V
049
A
1
1
1
Model Type
N= Envision
C
T
L
Return Air Configuration
L=
Left
R=
Right
Compressor Type
D= Dual Capacity
S= Single Speed
Discharge Air Configuration
B=
Bottom
T=
Top
S=
Side
E=
End
Cabinet Configuration
V= Vertical
H= Horizontal
Coax Options
C=
Copper
N=
Cupronickel
Unit Capacity
Vintage
A= Current
Fan Option
0=
PSC
1=
ECM
2=
Oversized ECM Blower Option
(036,038,042,048,049)
3=
Oversized PSC Blower Option
(022,030,036,042,048)
Voltage
1= 208-230/60/1
Hot Water Option
0=
None
1=
Hot Water Generation with
factory installed pump
Notes: PSC Motor - Single Speed Only
WaterFurnace works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice. Please contact WaterFurnace at 1-800-478-5667 for latest design and
specifications. Purchaser’s approval of this data set signifies that the equipment is acceptable under the provisions of the job specification. Statements and other information contained herein are not express warranties and do not form the
basis of any bargain between the parties, but are merely WaterFurnace’s opinion or commendation of its products. The latest version of this document is available at www.waterfurnace.com.
SD1585
10/08
2
Page _____ of _____
Contractor:
Engineer:
ENVISION Residential Series
2-6 Tons 60Hz
P.O.:
Project Name:
Unit Tag:
Performance Standard
ARI/ISO/ASHRAE 13256-1
The performance standard ARI/ASHRAE/ISO 13256-1 became effective January 1, 2000 and replaces ARI Standards 320, 325,
and 330. This new standard has three major categories: Water Loop (comparable to ARI 320), Ground Water (ARI 325), and Ground
Loop (ARI 330). Although these standards are similar there are some differences:
Unit of Measure: The Cooling COP
The cooling efficiency is measured in EER (US version measured in Btuh per Watt. The Metric version is measured in a cooling COP (Watt per Watt) similar to the traditional COP measurement.
Water Conditions Differences
Entering water temperatures have changed to reflect the centigrade temperature scale. For instance the water loop heating test is
performed with 68°F (20°C) water rounded down from the old 70°F (21.1°C).
Air Conditions Differences
Entering air temperatures have also changed (rounded down) to reflect the centigrade temperature scale. For instance the cooling
tests are performed with 80.6°F (27°C) dry bulb and 66.2°F (19°C) wet bulb entering air instead of the traditional 80°F (26.7°C) DB
and 67°F (19.4°C) WB entering air temperatures. 80.6/66.2 data may be converted to 80/67 using the entering air correction table.
This represents a significantly lower relative humidity than the old 80/67 of 50% and will result in lower latent capacities.
Pump Power Correction Calculation
Within each model, only one water flow rate is specified for all three groups and pumping Watts are calculated using the following
formula. This additional power is added onto the existing power consumption.
•Pump power correction = (gpm x 0.0631) x (Press Drop x 2990) / 300
Where ‘gpm’ is waterflow in gpm and ‘Press Drop’ is the pressure drop through the unit heat exchanger at rated water
flow in feet of head.
Fan Power Correction Calculation
Fan power is corrected to zero external static pressure using the following equation. The nominal airflow is rated at a specific
external static pressure. This effectively reduces the power consumption of the unit and increases cooling capacity but decreases
heating capacity. These Watts are significant enough in most cases to increase EER and COPs fairly dramatically over ARI 320,
325, and 330 ratings.
•Fan Power Correction = (cfm x 0.472) x (esp x 249) / 300
Where ‘cfm’ is airflow in cfm and ‘esp’ is the external static pressure at rated airflow in inches of water gauge.
ISO Capacity and Efficiency Calculations
The following equations illustrate cooling calculations:
•ISO Cooling Capacity = Cooling Capacity (Btuh) + (Fan Power Correction (Watts) x 3.412)
•ISO EER Efficiency (W/W) = ISO Cooling Capacity (Btuh) x 3.412 / [Power Input (Watts) - Fan Power Correction (Watts) +
Pump Power Correction (Watt)]
The following equations illustrate heating calculations:
•ISO Heating Capacity = Heating Capacity (Btuh) - (Fan Power Correction (Watts) x 3.412)
•ISO COP Efficiency (W/W) = ISO Heating Capacity (Btuh) x 3.412 / [Power Input (Watts) - Fan Power Correction (Watts) +
Pump Power Correction (Watt)]
Comparison of Test Conditions
ARI 320
ISO/ARI
13256-1
WLHP
ARI 325
ISO/ARI
13256-1
GWHP
ARI 330
ISO/ARI
13256-1 GLHP
80/67
85
*
80.6/66.2
86
**
80/67
50/70
**
80.6/66.2
59
**
80/67
77
**
80.6/66.2
77
**
70
70
*
68
68
**
70
50/70
**
68
50
**
70
32
**
68
32
**
Cooling
Entering Air - DB/WB °F
Entering Water - °F
Fluid Flow Rate
Heating
Entering Air - DB/WB °F
Entering Water - °F
Fluid Flow Rate
Note *: Flow rate is set by 10°F rise in standard cooling test
Note **: Flow rate is specified by the manufacturer
Part load entering water conditions not shown.
WLHP = Water Loop Heat Pump; GWHP = Ground Water Heat Pump; GLHP = Ground Loop Heat Pump
Conversions:
Airflow (lps) = CFM x 0.472;
ESP (Pascals) = ESP (in wg) x 249; WaterFlow (lps) = GPM x 0.0631; Press Drop (Pascals) = Press Drop (ft hd) x 2990
WaterFurnace works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice. Please contact WaterFurnace at 1-800-478-5667 for latest design and
specifications. Purchaser’s approval of this data set signifies that the equipment is acceptable under the provisions of the job specification. Statements and other information contained herein are not express warranties and do not form the
basis of any bargain between the parties, but are merely WaterFurnace’s opinion or commendation of its products. The latest version of this document is available at www.waterfurnace.com.
SD1585
10/08
3
Page _____ of _____
Contractor:
Engineer:
ENVISION Residential Series
2-6 Tons 60Hz
P.O.:
Project Name:
Unit Tag:
ARI/ISO 13256-1 Performance Ratings
Water Loop Heat Pump
Flow Rate
Model
026
038
049
064
072
022
030
036
042
048
060
070
Cap.
Mod
Full
Part
Full
Part
Full
Part
Full
Part
Full
Part
single
single
single
single
single
single
single
single
single
single
single
single
single
single
Motor
ECM
ECM
ECM
ECM
ECM
ECM
ECM
ECM
ECM
ECM
ECM
PSC
ECM
PSC
ECM
PSC
ECM
PSC
ECM
PSC
ECM
PSC
ECM
PSC
gpm
8
7
9
8
12
11
16
14
18
16
8
8
8
8
9
9
11
11
12
12
15
15
18
18
cfm
950
750
1300
1150
1400
1200
1800
1500
2000
1800
800
750
1000
900
1200
1200
1300
1300
1500
1500
1800
1800
2000
2000
Cooling
EWT 86°F
Capacity EER
Btuh
Btuh/W
26,000
16.0
19,500
18.6
39,000
17.2
28,000
20.1
48,300
15.8
35,900
18.1
64,500
16.2
47,000
18.2
71,000
15.0
54,000
16.6
20,700
17.5
20,600
17.2
28,300
19.2
28,100
18.2
34,500
19.6
34,100
17.6
40,600
19.2
40,100
16.6
47,000
17.5
46,400
15.5
64,300
17.2
64,000
16.0
70,600
16.0
70,600
15.1
Ground Water Heat Pump
Heating
EWT 68°F
Capacity
Btuh
31,000
22,600
42,200
30,300
57,400
41,900
72,500
51,500
86,700
63,400
25,300
25,000
32,700
32,700
38,000
37,900
44,100
44,100
55,400
55,400
69,800
69,800
84,300
84,300
COP
5.5
6.3
5.5
6.5
5.1
6.1
5.1
5.8
5.0
5.4
6.2
6.0
5.8
5.5
6.1
5.6
5.9
5.3
5.5
5.0
5.4
5.1
5.1
4.7
Cooling
EWT 59°F
Capacity
Btuh
29,000
22,000
39,400
30,500
53,200
37,800
70,700
51,500
79,900
62,200
23,500
23,000
31,300
30,900
37,200
36,300
45,200
44,600
52,000
51,600
72,000
71,700
79,100
77,500
EER
Btuh/W
24.0
31.2
24.1
32.1
22.7
28.3
22.7
29.3
20.4
26.0
30.0
28.0
28.8
27.1
30.1
25.7
29.5
24.5
26.1
22.5
26.1
24.6
23.8
21.6
Heating
EWT 50°F
Capacity
Btuh
25,300
18,100
34,800
24,800
47,200
34,000
56,800
39,600
67,900
51,000
19,800
19,800
25,800
25,800
30,300
30,300
34,900
34,900
45,100
45,100
55,100
55,100
66,100
66,100
COP
5.0
5.4
5.0
5.4
4.7
5.2
4.6
4.8
4.4
4.6
5.3
5.0
5.0
4.8
5.2
4.7
5.2
4.6
4.8
4.3
4.7
4.4
4.4
4.0
Ground Loop Heat Pump
Cooling Brine
Heating Brine
Full Load 77°F
Full Load 32°F
Part Load 68°F
Part Load 41°F
Capacity
EER
Capacity
COP
Btuh
Btuh/W
Btuh
27,200
18.6
19,500
4.2
21,500
26.8
16,200
4.7
40,200
20.1
27,000
4.2
30,100
30.0
22,300
5.1
50,000
18.0
37,400
4.1
38,700
25.1
31,000
4.7
67,600
18.0
45,800
3.9
51,100
25.6
36,000
4.2
73,600
16.8
54,100
3.8
58,800
23.1
45,000
4.3
21,700
21.0
15,000
4.0
21,200
20.3
15,000
3.8
29,400
21.9
20,000
4.0
29,200
21.1
19,800
3.8
35,000
22.0
24,100
4.4
34,600
19.6
24,100
4.0
42,000
21.4
27,500
4.2
41,600
18.6
27,500
3.7
49,300
19.7
35,300
4.0
48,900
17.3
35,300
3.6
66,800
19.5
43,200
3.9
66,800
18.5
43,200
3.7
73,200
18.2
52,000
3.7
73,200
17.2
52,000
3.4
1/15/08
Cooling capacities based upon 80.6°F DB, 66.2°F WB entering air temperature
Heating capacities based upon 68°F DB, 59°F WB entering air temperature
All ratings based upon 208V operation
WaterFurnace works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice. Please contact WaterFurnace at 1-800-478-5667 for latest design and
specifications. Purchaser’s approval of this data set signifies that the equipment is acceptable under the provisions of the job specification. Statements and other information contained herein are not express warranties and do not form the
basis of any bargain between the parties, but are merely WaterFurnace’s opinion or commendation of its products. The latest version of this document is available at www.waterfurnace.com.
SD1585
10/08
4
Page _____ of _____
Contractor:
Engineer:
ENVISION Residential Series
2-6 Tons 60Hz
P.O.:
Project Name:
Unit Tag:
Fan Performance Data - PSC
Standard PSC Motor
Motor
Model
022
030
036
042
048
060
070
Motor
Fan
Spd
H
M
L
H
M
L
H
M
L
H
M
L
H
M
L
H
M
L
H
M
L
Blower
Size
Motor
HP
9x7
1/5
9x7
1/3
9x7
1/2
10 x 10
1/2
10 x 10
1/2
11 x 10
1
11 x 10
1
0
1110
850
750
1290
1100
910
1665
1465
1130
2010
1670
1220
2010
1670
1220
2430
2265
2075
2430
2265
2075
0.05
1095
845
745
1270
1090
905
1640
1445
1115
1975
1650
1215
1975
1650
1215
2400
2235
2050
2400
2235
2050
0.10
1080
835
740
1245
1075
900
1610
1425
1100
1940
1630
1210
1940
1630
1210
2365
2205
2020
2365
2205
2020
0.15
1065
825
735
1220
1060
895
1580
1400
1090
1905
1610
1295
1905
1610
1295
2330
2175
1995
2330
2175
1995
0.20
1045
815
725
1190
1045
885
1550
1375
1075
1870
1590
1200
1870
1590
1200
2290
2145
1965
2290
2145
1965
Airflow (cfm) at External Static Pressure (in. wg)
0.25
0.30
0.35
0.40
0.45
0.50
0.60
1020
995
970
945
915
880
810
805
795
775
755
735
715
715
700
685
670
650
630
1160
1125
1090
1055
1020
985
880
1020
995
970
940
910
875
785
875
865
850
835
810
780
710
1515
1480
1450
1415
1315
1215
1090
1350
1325
1260
1190
1140
1090
990
1035
995
965
930
895
860
795
1825
1780
1735
1690
1640
1590
1470
1560
1530
1495
1460
1425
1390
1190
1180
1160
1130
1100
1060
1020
930
1825
1780
1735
1690
1640
1590
1470
1560
1530
1495
1460
1425
1390
1190
1180
1160
1130
1100
1060
1020
930
2255
2215
2180
2140
2095
2045
1945
2110
2070
2035
2000
1960
1915
1825
1940
1915
1885
1850
1820
1785
1720
2255
2215
2180
2140
2095
2045
1945
2110
2070
2035
2000
1960
1915
1825
1940
1915
1885
1850
1820
1785
1720
0.70
760
625
560
980
890
730
1210
1080
1210
1080
1835
1730
1610
1835
1730
1610
0.20
1190
1045
885
1280
1020
875
1805
1555
1200
1920
1865
1750
1920
1865
1750
Airflow (cfm) at External Static Pressure (in. wg)
0.25
0.30
0.35
0.40
0.45
0.50
0.60
1160
1125
1090
1055
1020
985
880
1020
995
970
940
910
875
785
875
865
850
835
810
780
710
1250
1215
1180
1140
1100
1055
960
1005
990
970
945
915
885
810
870
860
840
820
800
775
730
1765
1725
1680
1635
1530
1425
1270
1530
1505
1465
1425
1335
1240
1135
1165
1130
1095
1060
1035
1005
935
1900
1880
1840
1795
1730
1660
1390
1815
1765
1725
1685
1585
1485
1315
1715
1675
1635
1590
1540
1490
1260
1900
1880
1840
1795
1730
1660
1390
1815
1765
1725
1685
1585
1485
1315
1715
1675
1635
1590
1540
1490
1260
0.70
760
625
560
850
735
480
1150
1035
795
1225
1140
1115
1225
1140
1115
0.80
1715
1605
1505
1715
1605
1505
0.90
1510
1440
1335
1510
1440
1335
1.00
1330
1260
1175
1330
1260
1175
0.80
1025
775
675
1070
1025
980
1070
1025
980
0.90
-
1.00
-
Optional High Static PSC Motor 
Model
022
030
036
042
048
Fan
Spd
H
M
L
H
M
L
H
M
L
H
M
L
H
M
L
Blower
Size
Motor
HP
9x7
1/3
9x7
1/2
9x7
1/2
10 x 10
3/4
10 x 10
3/4
0
1290
1100
910
1365
1040
880
1930
1635
1230
2115
2005
1860
2115
2005
1860
0.05
1270
1090
905
1340
1040
880
1905
1620
1230
2075
1980
1835
2075
1980
1835
0.10
1245
1075
900
1325
1035
880
1875
1600
1225
2035
1950
1805
2035
1950
1805
0.15
1220
1060
895
1305
1030
880
1840
1580
1215
1980
1910
1780
1980
1910
1780
Factory settings are in Bold
High-Static option not available for 060 and 070
Air flow values are with dry coil and standard filter
For wet coil performance first calculate the face velocity of the air coil (Face Velocity [fpm] = Airflow [cfm] / Face Area [sq ft]).
Then for velocities of 200 fpm reduce the static capability by 0.03 in. wg, 300 fpm by 0.08 in. wg, 400 fpm by 0.12in. wg.
and 500 fpm by 0.16 in. wg.
WaterFurnace works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice. Please contact WaterFurnace at 1-800-478-5667 for latest design and
specifications. Purchaser’s approval of this data set signifies that the equipment is acceptable under the provisions of the job specification. Statements and other information contained herein are not express warranties and do not form the
basis of any bargain between the parties, but are merely WaterFurnace’s opinion or commendation of its products. The latest version of this document is available at www.waterfurnace.com.
SD1585
10/08
5
Page _____ of _____
Contractor:
Engineer:
ENVISION Residential Series
2-6 Tons 60Hz
P.O.:
Project Name:
Unit Tag:
Fan Performance Data - ECM
Single Speed
MODEL
MAX
ESP
022
0.50
030
0.50
036
0.50
036
w/1hp*
0.75
042
0.50
042
w/1hp*
0.75
048
0.50
048
w/1hp*
0.75
060
0.75
070
0.75
1
2
400
400
650
750
800
1000
L
650
800
650
900
L
800
800
900
800
800
950
950
8
9
10
1000
1100
1200
H
800
900
H
1000
1100
1200
1400
1500
1600
1300
H
1800
1250
1350
1450
1550
4
600
M
600
850
L
1100
M
1000
1300
H
1500
900
L
1000
1050
1150
900
1000
1100
L
1100
L
700
M
1100
1200
M
M
1200
M
1050
L
1200
L
800
AIR FLOW DIP SWITCH SETTINGS
5
6
7
800
900
700
3
500
L
500
L
1300
12
2200
2300
2400
2200
2300
2400
H
1400
1600
1700
1850
2000
H
1150
1250
1350
1450
1550
1400
1600
1700
1850
2000
M
H
1500
1750
1950
2100
2300
2100
2300
M
M
1300
11
H
H
1500
1750
1950
M
H
5/30/06
Factory settings are at recommended L-M-H DIP switch locations
M-H settings MUST be located within boldface CFM range
Lowest and Highest DIP switch settings are assumed to be L and H respectively
CFM is controlled within ±5% up to the maximum ESP
Max ESP includes allowance for wet coil and standard filter
Dual Capacity
MODEL
MAX
ESP
026
0.50
038
0.50
038
w/1hp*
0.75
049
0.50
049
w/1hp*
0.75
064
0.75
072
0.75
1
650
800
L
650
2
400
3
500
L
4
600
750
L
1000
850
1000
1100
M
1300
H
800
AIR FLOW DIP SWITCH SETTINGS
5
6
7
800
900
700
H
M
1100
1200
1300
M
H
1500
1600
1800
900
1050
1150
1250
900
1000
1200
950
L
950
1100
1300
1400
M
1500
M
1500
1600
H
1750
L
800
L
800
800
1100
L
1300
8
9
10
1000
1100
1200
1400
1500
1450
1350
M
1700
1850
1550
H
2000
1950
2100
2300
2100
2300
2200
11
12
2300
2400
H
1750
M
1950
H
5/30/06
Factory settings are at recommended L-M-H DIP switch locations
M-H settings MUST be located within boldface CFM range
Lowest and Highest DIP switch settings are assumed to be L and H respectively
CFM is controlled within ±5% up to the maximum ESP
Max ESP includes allowance for wet coil and standard filter
A 12-position DIP switch package on the control allows the airflow levels to be set for low, medium,
and high speed when using the ECM2 blower motor. Only three of the DIP switches can be in the
"on" position.
• The first "on" switch (the lowest position number) determines the low speed fan setting.
• The second "on" switch determines the medium speed fan setting.
• The third "on" switch determines the high speed fan setting.
The example to the right shows SW1 on the control board configured for the following 042
airflow settings.
• Low Speed Fan: 900 CFM
• Medium Speed Fan: 1150 CFM
• High Speed Fan: 1450 CFM
Off
SW1
On
1
2
3
4
5
6
7
8
9
10
11
12
WaterFurnace works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice. Please contact WaterFurnace at 1-800-478-5667 for latest design and
specifications. Purchaser’s approval of this data set signifies that the equipment is acceptable under the provisions of the job specification. Statements and other information contained herein are not express warranties and do not form the
basis of any bargain between the parties, but are merely WaterFurnace’s opinion or commendation of its products. The latest version of this document is available at www.waterfurnace.com.
SD1585
10/08
6
Page _____ of _____
Contractor:
Engineer:
ENVISION Residential Series
2-6 Tons 60Hz
P.O.:
Project Name:
Unit Tag:
Physical Data (Single Speed)
SINGLE SPEED
Model
022
030
036
042
Compressor (1 each)
048
060
070
Copeland Scroll
Factory Charge R410a, oz [kg]
Vertical
62 [1.76]
62 [1.76]
82 [2.32]
82 [2.32]
98 [2.78]
110 [3.12]
146 [4.14]
Factory Charge R410a, oz [kg]
Horizontal
60 [1.70]
66 [1.87]
82 [2.32]
82 [2.32]
98 [2.78]
94 [2.67]
122 [3.46]
1 [746]
Fan Motor & Blower
ECM
Fan Motor Type/Speeds
ECM Variable Speed
PSC
ECM
Fan Motor- hp [W]
PSC 3 Speeds
[373]
1/2
[373]
1/2
[373]
1/2
[373]
1/2
[373]
1 [746]
PSC
1/5 [149]
1/3
[249]
1/2
[373]
1/2
[373]
1/2
[373]
1 [746]
1 [746]
ECM
9x7
[229 x 178]
9x7
[229 x 178]
11 x 10
[279 x 254]
11 x 10
[279 x 254]
11 x 10
[279 x 254]
11 x 10
[279 x 254]
11 x 10
[279 x 254]
PSC
9x7
[229 x 178]
9x7
[229 x 178]
10 x 10
[254 x 254]
10 x 10
[254 x 254]
10 x 10
[254 x 254]
11 x 10
[279 x 254]
11 x 10
[279 x 254]
Blower Wheel Size (Dia x W), in. [mm]
1/2
Coax and Water Piping
Water Connections Size - Swivel - in [mm]
1" [25.4]
1" [25.4]
1" [25.4]
1" [25.4]
1" [25.4]
1" [25.4]
1" [25.4]
HWG Connection Size - Swivel - in [mm]
1" [25.4]
1" [25.4]
1" [25.4]
1" [25.4]
1" [25.4]
1" [25.4]
1" [25.4]
Coax & Piping Water Volume - gal [l]
0.7 [2.6]
1.0 [3.8]
1.3 [4.9]
1.3 [4.9]
1.6 [6.1]
1.6 [6.1]
2.3 [8.7]
Air Coil Dimensions (H x W), in. [mm]
28 x 20
[711 x 542]
28 x 20
[711 x 542]
28 x 25
[711 x 635]
32 x 25
[813 x 635]
32 x 25
[813 x 635]
36 x 25
[914 x 635]
36 x 25
[914 x 635]
Air Coil Total Face Area, ft2 [m2]
3.9 [0.362]
3.9 [0.362]
4.9 [0.451]
5.6 [0.570]
5.6 [0.570]
6.3 [0.641]
6.3 [0.641]
3/8 [9.5]
3/8 [9.5]
3/8 [9.5]
3/8 [9.5]
3/8 [9.5]
3/8 [9.5]
3/8 [9.5]
3
3
3
3
3
4
4
Vertical
Air Coil Tube Size, in [mm]
Air Coil Number of rows
Filter Standard - 2" [51mm] Pleated
MERV11 Throwaway, in [mm]
28 x 24
[712 x 610]
28 x 24
[712 x 610]
28 x 30
[712 x 762]
32 x 30
[813 x 762]
32 x 30
[813 x 762]
36 x 30
[914 x 762]
36 x 30
[914 x 762]
Weight - Operating, lb [kg]
305 [138]
320 [145]
365 [166]
380 [172]
420 [190]
455 [206]
480 [218]
Weight - Packaged, lb [kg]
315 [143]
330 [150]
375 [170]
390 [177]
430 [195]
465 [211]
490 [222]
Air Coil Dimensions (H x W), in. [mm]
18 x 30
[457 x 762]
18 x 30
[457 x 762]
20 x 35
[508 x 889]
20 x 40
[508 x 1016]
20 x 40
[508 x 1016]
20 x 45
[508 x 1143]
20 x 45
[508 x 1143]
Air Coil Total Face Area, ft2 [m2]
3.9 [0.362]
3.9 [0.362]
4.9 [0.451]
5.6 [0.570]
5.6 [0.570]
6.3 [0.641]
6.3 [0.641]
3/8 [9.5]
3/8 [9.5]
3/8 [9.5]
3/8 [9.5]
3/8 [9.5]
3/8 [9.5]
3/8 [9.5]
3
3
3
3
3
3
Horizontal
Air Coil Tube Size, in [mm]
Air Coil Number of rows
Filter Standard - 2" [51mm] Pleated
MERV11 Throwaway, in [mm]
1 - 18 x 32
[457 x 813]
1 - 18 x 32
[457 x 813]
1 - 20 x 37
[686 x 940]
1 - 20 x 20
[508 x 508]
1 - 20 x 22
[508 x 559]
1 - 20 x 20
[508 x 508]
1 - 20 x 22
[508 x 559]
1 - 20 x 25
[508 x 635]
1 - 20 x 22
[508 x 559]
3
1 - 20 x 25
[508 x 635]
1 - 20 x 22
[508 x 559]
Weight - Operating, lb [kg]
307 [139]
322 [146]
370 [168]
385 [175]
425 [193]
460 [209]
485 [220]
Weight - Packaged, lb [kg]
322 [146]
337 [153]
385 [175]
400 [181]
440 [200]
475 [215]
500 [227]
4/9/07
Notes: Sizes 036, 042, 048 available with 1HP blower motor. (ECM only)
Model
026
DUAL CAPACITY
049
038
Compressor (1 each)
064
072
Copeland 2-speed Scroll, UltraTech
Factory Charge R410a, oz [kg]
Vertical
62 [1.76]
78 [2.21]
89 [2.52]
122 [3.46]
140 [3.97]
Factory Charge R410a, oz [kg]
Horizontal
60 [1.70]
76 [2.16]
89 [2.52]
124 [3.52]
160 [4.54]
ECM Fan Motor & Blower
Fan Motor Type/Speeds
Fan Motor- hp [W]
ECM Variable Speed
1/2
[373]
1/2
[373]
1 [746]
1 [746]
9x7
11 x 10
1/2
11 x 10
[373]
11 x 10
11 x 10
1" [25.4]
7
1" [25.4]
1" [25.4]
1" [25.4]
1"Page
[25.4]
1" [25.4]
1" [25.4]
1" [25.4]
1" [25.4]
1" [25.4]
Blowerworks
Wheel
Size (Dia
x W), in.
[mm] As a result, the design and specifications of each product at the time of order may be changed without notice. Please contact WaterFurnace at 1-800-478-5667 for latest design and
WaterFurnace
continually
to improve
its products.
[229under
x 178]
254]
[279 x 254]
[279 xcontained
254] herein are[279
x 254]warranties and do not form the
specifications. Purchaser’s approval of this data set signifies that the equipment is acceptable
the provisions [279
of thexjob
specification. Statements
and other information
not express
basis of any bargain between the parties, but are merely WaterFurnace’s opinion or commendation of its products. The latest version of this document is available at www.waterfurnace.com.
Coax and Water Piping
SD1585
10/08 Size - Swivel - in [mm]
Water Connections
HWG Connection Size - Swivel - in [mm]
_____ of _____
Horizontal
Air Coil Dimensions (H x W), in. [mm]
18 x 30
[457 x 762]
18 x 30
[457 x 762]
20 x 35
[508 x 889]
20 x 40
[508 x 1016]
20 x 40
[508 x 1016]
20 x 45
[508 x 1143]
20 x 45
[508 x 1143]
Air Coil Total Face Area, ft2 [m2]
3.9 [0.362]
3.9 [0.362]
4.9 [0.451]
5.6 [0.570]
5.6 [0.570]
6.3 [0.641]
6.3 [0.641]
3/8 [9.5]
3/8 [9.5]
3/8 [9.5]
3/8 [9.5]
3/8 [9.5]
3/8 [9.5]
3/8 [9.5]
3
P.O.:
3
3
3
1 - 18 x 32
[457 x 813]
1 - 18 x 32
[457 x 813]
1 - 20 x 37
[686 x 940]
1 - 20 x 20
[508 x 508]
1 - 20 x 22
[508 x 559]
[508 x 635]
1 - 20 x 22
[508 x 559]
[508 x 635]
1 - 20 x 22
[508 x 559]
370 [168]
385 [175]
425 [193]
460 [209]
485 [220]
440 [200]
475 [215]
500 [227]
Air Coil Tube Size, in [mm]
Air Coil Number of rows
Contractor:
Engineer:
Filter Standard - 2" [51mm] Pleated
MERV11 Throwaway, in [mm]
Project Name:
Unit Tag:
Weight - Operating, lb [kg]
307 [139]
322 [146]
Physical Data (Dual Capacity)
Weight - Packaged, lb [kg]
322 [146]
Model
337 [153]
026
385 [175]
400 [181]
[508 x 508]
1 - 20 x 22
[508 x 559]
4/9/07
DUAL CAPACITY
049
038
Compressor (1 each)
ENVISION
Residential
Series
3
3
2-6
Tons
60Hz
1 - 20 x 20
1 - 20 x 25
1 - 20 x 25
3
064
072
Copeland 2-speed Scroll, UltraTech
Factory Charge R410a, oz [kg]
Vertical
62 [1.76]
78 [2.21]
89 [2.52]
122 [3.46]
140 [3.97]
Factory Charge R410a, oz [kg]
Horizontal
60 [1.70]
76 [2.16]
89 [2.52]
124 [3.52]
160 [4.54]
ECM Fan Motor & Blower
Fan Motor Type/Speeds
ECM Variable Speed
Fan Motor- hp [W]
1/2
[373]
1/2
[373]
1 [746]
1 [746]
Blower Wheel Size (Dia x W), in. [mm]
9x7
[229 x 178]
11 x 10
[279 x 254]
1/2
11 x 10
[279 x 254]
[373]
11 x 10
[279 x 254]
11 x 10
[279 x 254]
Water Connections Size - Swivel - in [mm]
1" [25.4]
1" [25.4]
1" [25.4]
1" [25.4]
1" [25.4]
HWG Connection Size - Swivel - in [mm]
1" [25.4]
1" [25.4]
1" [25.4]
1" [25.4]
1" [25.4]
Coax & Piping Water Volume - gal [l]
0.7 [2.6]
1.3 [4.9]
1.6 [6.1]
1.6 [6.1]
2.3 [8.7]
Air Coil Dimensions (H x W), in. [mm]
28 x 20
[711 x 542]
28 x 25
[711 x 635]
32 x 25
[813 x 635]
36 x 25
[914 x 635]
36 x 25
[914 x 635]
Air Coil Total Face Area, ft2 [m2]
3.9 [0.362]
4.9 [0.451]
5.6 [0.570]
6.3 [0.641]
6.3 [0.641]
3/8 [9.5]
3/8 [9.5]
3/8 [9.5]
3/8 [9.5]
3/8 [9.5]
3
3
3
4
Coax and Water Piping
Vertical
Air Coil Tube Size, in [mm]
Air Coil Number of rows
Filter Standard - 2" [51mm] Pleated
MERV11 Throwaway, in [mm]
28 x 24
[712 x 610]
28 x 30
[712 x 762]
32 x 30
[813 x 762]
Weight - Operating, lb [kg]
305 [138]
370 [168]
Weight - Packaged, lb [kg]
315 [143]
380 [172]
Air Coil Dimensions (H x W), in. [mm]
18 x 30
[457 x 762]
Air Coil Total Face Area, ft2 [m2]
4
36 x 30
[914 x 762]
36 x 30
[914 x 762]
420 [190]
465 [211]
480 [218]
430 [195]
475 [215]
490 [222]
20 x 35
[508 x 889]
20 x 40
[508 x 1016]
20 x 45
[508 x 1143]
20 x 45
[508 x 1143]
3.9 [0.362]
4.9 [0.451]
5.6 [0.570]
6.3 [0.641]
6.3 [0.641]
3/8 [9.5]
3/8 [9.5]
3/8 [9.5]
3/8 [9.5]
3/8 [9.5]
3
3
3
4
4
1 - 20 x 25
[508 x 635]
1 - 20 x 22
[508 x 559]
1 - 20 x 25
[508 x 635]
1 - 20 x 22
[508 x 559]
Horizontal
Air Coil Tube Size, in [mm]
Air Coil Number of rows
1 - 18 x 32
[457 x 813]
1 - 20 x 37
[686 x 940]
1 - 20 x 20
[508 x 508]
1 - 20 x 22
[508 x 559]
Weight - Operating, lb [kg]
307 [139]
375 [170]
425 [193]
470 [213]
485 [220]
Weight - Packaged, lb [kg]
322 [146]
390 [177]
440 [200]
485 [220]
500 [227]
Filter Standard - 2" [51mm] Pleated
MERV11 Throwaway, in [mm]
4/9/07
Notes: Sizes 038, 049 available with 1HP blower motor (ECM only).
WaterFurnace works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice. Please contact WaterFurnace at 1-800-478-5667 for latest design and
specifications. Purchaser’s approval of this data set signifies that the equipment is acceptable under the provisions of the job specification. Statements and other information contained herein are not express warranties and do not form the
basis of any bargain between the parties, but are merely WaterFurnace’s opinion or commendation of its products. The latest version of this document is available at www.waterfurnace.com.
SD1585
10/08
8
Page _____ of _____
Contractor:
Engineer:
ENVISION Residential Series
2-6 Tons 60Hz
P.O.:
Project Name:
Unit Tag:
Unit Electrical Data
Single speed with ECM motor
Rated
Voltage
Model
Voltage
MIN/MAX
Compressor
MCC
HWG
Ext
Fan
Total
Min
Max
Pump
Loop
Motor
Unit
Circ
Fuse/
RLA
LRA
FLA
FLA
FLA
FLA
Amp
HACR
022
14.0
9.0
48.0
0.4
5.4
4.0
18.8
21.0
30
030
20.0
12.8
58.3
0.4
5.4
4.0
22.6
25.8
35
036
22.0
14.1
73.0
0.4
5.4
4.0
23.9
27.4
40
036*
22.0
14.1
73.0
0.4
5.4
7.0
26.9
30.4
40
042
26.0
16.6
79.0
0.4
5.4
4.0
26.4
30.6
45
26.0
16.6
79.0
0.4
5.4
7.0
29.4
33.6
50
048
31.0
19.8
109.0
0.4
5.4
4.0
29.6
34.6
50
048*
31.0
19.8
109.0
0.4
5.4
7.0
32.6
37.6
50
060
41.2
26.4
134.0
0.4
5.4
7.0
39.2
45.8
70
070
47.0
30.1
158.0
0.4
5.4
7.0
42.9
50.4
80
HWG
Pump
FLA
0.4
0.4
0.4
0.4
0.4
0.4
0.4
0.4
0.4
0.4
0.4
0.4
Ext
Loop
FLA
5.4
5.4
5.4
5.4
5.4
5.4
5.4
5.4
5.4
5.4
5.4
5.4
Fan
Motor
FLA
1.2
1.5
1.5
2.2
2.8
3.5
3.5
4.6
3.5
4.6
5.9
5.9
Total
Unit
FLA
16.0
16.3
20.1
20.8
22.7
23.4
25.9
27.0
29.1
30.2
38.1
41.8
Min
Circ
Amp
18.2
18.5
23.3
24.0
26.2
26.9
30.1
31.2
34.1
35.2
44.7
49.3
Max
Fuse/
HACR
25
25
35
35
40
40
45
45
50
50
70
70
042*
208-230/60/1
197/253
*With optional 1 HP ECM2 motor
Single speed with PSC Motor
Rated
Voltage
Model
Voltage
Min/Max
022
022*
030
030*
036
036*
208-230/60/1
197/253
042
042*
048
048*
060
070
*With optional over-sized blower
Compressor
MCC
14.0
14.0
20.0
20.0
22.0
22.0
26.0
26.0
31.0
31.0
41.2
47.0
RLA
9.0
9.0
12.8
12.8
14.1
14.1
16.6
16.6
19.8
19.8
26.4
30.1
LRA
48.0
48.0
58.3
58.3
73.0
73.0
79.0
79.0
109.0
109.0
134.0
158.0
2/20/07
Dual Capacity
Rated
Voltage
Model
Voltage
MIN/MAX
Compressor
HWG
Ext
Fan
Total
Min
Max
Pump
Loop
Motor
Unit
Circ
Fuse/
MCC
RLA
LRA
FLA
FLA
FLA
FLA
Amp
HACR
026
16.0
10.2
52.0
0.4
5.4
4.0
20.0
22.6
30
038
26.0
16.6
82.0
0.4
5.4
4.0
26.4
30.6
45
038*
26.0
16.6
82.0
0.4
5.4
7.0
29.4
33.6
50
208-230/60/1
197/253
33.0
21.1
96.0
0.4
5.4
4.0
30.9
36.2
50
049*
33.0
21.1
96.0
0.4
5.4
7.0
33.9
39.2
60
064
40.0
25.6
118.0
0.4
5.4
7.0
38.4
44.8
70
072
42.5
27.2
150.0
0.4
5.4
7.0
40.0
46.8
049
*With optional 1 HP ECM2 motor
70
5/30/06
NOTE: HACR circuit breaker in USA only. All fuses Class RK-5
WaterFurnace works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice. Please contact WaterFurnace at 1-800-478-5667 for latest design and
specifications. Purchaser’s approval of this data set signifies that the equipment is acceptable under the provisions of the job specification. Statements and other information contained herein are not express warranties and do not form the
basis of any bargain between the parties, but are merely WaterFurnace’s opinion or commendation of its products. The latest version of this document is available at www.waterfurnace.com.
SD1585
10/08
9
Page _____ of _____
Contractor:
Engineer:
ENVISION Residential Series
2-6 Tons 60Hz
P.O.:
Project Name:
Unit Tag:
Vertical Dimensional Data
Top Air Discharge
ENVISION DIMENSIONAL DATA V1-V4
LEFT RETURN
RIGHT RETURN
P
Q
M
O
L
Q
L
N
R
O
R
N
1.9in
[4.8cm]
TOP
TOP
T
T
1.9in
[4.8cm]
S
S
C
C
K J I
DEHFG
A
FRONT
2ft [61cm]
Primary Service Access
B
B
RIGHT SIDE
LEFT SIDE
Water Connections
Overall Cabinet
Vertical
Models
A
B
C
Width Depth Height*
022-030
036-038
042-049
060-072
Electrical Knockouts
I
D
E
F
G
H
Loop
In
Out
HWG In
HWG
Out
Condensate
Water FPT
HWG FPT
1" Swivel
1" Swivel
1" Swivel
1" Swivel
1" Swivel
1" Swivel
1" Swivel
1" Swivel
in.
22.5
26.5
48.5
2.0
7.0
13.5
16.5
10.2
cm.
57.2
67.2
123.2
5.0
17.7
34.2
41.8
26.0
in.
25.6
31.6
50.4
2.3
7.3
15.9
18.9
10.6
cm.
65.0
80.2
128.0
5.7
18.4
40.3
47.9
26.8
in.
25.6
31.6
54.4
2.3
7.3
15.9
18.9
10.6
cm.
65.0
80.2
138.2
5.7
18.4
40.3
47.9
26.8
in.
25.6
31.6
58.4
2.3
7.3
15.9
18.9
10.6
cm.
65.0
80.2
148.3
5.7
18.4
40.3
47.9
26.8
Discharge Connection
J
K
1/2" cond
1/2" cond
3/4" cond
Low
Voltage
Ext Pump
Power
Supply
Return Connection
duct flange installed (±0.10 in)
L
M
N
O
Supply
Width
Supply
Depth
using std deluxe filter rack (±0.10 in)
P
Q
R
S
Return
Depth
Return
Height
T
8.5
10.4
11.8
6.1
0.8
14.0
14.0
4.4
1.7
22.2
26.0
21.6
26.4
29.8
15.5
2.1
35.6
35.6
11.1
4.2
56.3
66.0
4.4
8.0
11.3
12.8
6.9
1.1
18.0
18.0
3.8
1.7
28.1
26.0
1.7
20.3
28.6
32.4
17.5
2.8
45.7
45.7
9.6
4.4
71.2
66.0
4.3
8.0
11.3
12.8
6.9
1.1
18.0
18.0
3.8
1.7
28.1
30.0
1.7
20.3
28.6
32.4
17.5
2.8
45.7
45.7
9.6
4.4
71.2
76.2
4.3
8.0
11.3
12.8
6.9
1.1
18.0
18.0
3.8
1.7
28.1
34.0
1.7
20.3
28.6
32.4
17.5
2.8
45.7
45.7
9.6
4.4
71.2
86.4
Condensate is 3/4" PVC female glue socket and is switchable from side to front
Vertical unit shipped with deluxe 2" (field adjustable to 1") duct collar/filter rack extending from unit 3.25" and is suitable for duct connection.
Discharge flange is field installed and extends 1" [25.4 mm] from cabinet
Decorative molding and water connections extend 1.2" [30.5mm] beyond front of cabinet.
1.7
4.3
Rev.: 07/19/06 B
WaterFurnace works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice. Please contact WaterFurnace at 1-800-478-5667 for latest design and
specifications. Purchaser’s approval of this data set signifies that the equipment is acceptable under the provisions of the job specification. Statements and other information contained herein are not express warranties and do not form the
basis of any bargain between the parties, but are merely WaterFurnace’s opinion or commendation of its products. The latest version of this document is available at www.waterfurnace.com.
SD1585
10/08
10
Page _____ of _____
Contractor:
Engineer:
ENVISION Residential Series
2-6 Tons 60Hz
P.O.:
Project Name:
Unit Tag:
Horizontal Dimensional Data
TOP VIEW
P
Q
2.1in [5.4cm]
MOUNT (2) HANGER BRACKETS
AS SHOWN TO ALLOW ACCESS
TO FILTER
2ft [61cm]
Primary Service Access
SIDE DISHCARGE VIEW
FRONT VIEW
A
S
1.9in
[4.8cm]
END VIEW
B
O
N
M
D E F
K J I
L
L
G
O
S
R
C
H
AS SHOWN LR UNIT (RR UNIT ON OPPOSITE SIDE—SAME DIMENSIONS)
Water Connections
Overall Cabinet
Horizontal
Models
A
B
C
Width Depth Height*
022-030
036-038
042-049
060-072
Electrical Knockouts
I
D
E
F
G
H
Loop
In
Out
HWG In
HWG
Out
Condensate
Water FPT
HWG FPT
1" Swivel
1" Swivel
1" Swivel
1" Swivel
1" Swivel
1" Swivel
1" Swivel
1" Swivel
in.
22.5
63.0
19.3
2.0
7.0
13.5
16.5
0.8
cm.
57.2
160.0
49.0
5.0
17.7
34.2
41.8
2.1
in.
25.6
72.0
21.3
2.3
7.3
15.9
18.9
0.8
cm.
65.0
182.9
54.1
5.7
18.4
40.3
47.9
2.1
in.
25.6
77.0
21.3
2.3
7.3
15.9
18.9
0.8
cm.
65.0
195.6
54.1
5.7
18.4
40.3
47.9
2.1
in.
25.6
82.0
21.3
2.3
7.3
15.9
18.9
0.8
cm.
65.0
208.3
54.1
5.7
18.4
40.3
47.9
2.1
Discharge Connection
J
K
1/2" cond
1/2" cond
3/4" cond
Low
Voltage
Ext Pump
Power
Supply
Return Connection
duct flange installed (±0.10 in)
L
M
N
Supply
Height
Supply
Depth
using std deluxe filter rack (±0.10 in)
O
P
Q
R
Return
Depth
Return
Height
S
8.8
9.4
11.8
2.3
10.5
9.4
5.8
2.8
30.5
16.9
22.2
24.0
30.0
5.8
26.5
23.8
14.7
7.0
77.3
42.9
1.3
3.3
8.8
9.4
11.8
13.6
13.2
35.5
18.9
1.3
24.0
30.0
34.6
33.5
SEE
CHART
2.8
22.2
SEE
CHART
7.0
90.0
47.9
3.3
8.8
9.4
11.8
13.6
13.2
40.4
18.9
1.3
24.0
30.0
34.6
33.5
SEE
CHART
2.8
22.2
SEE
CHART
7.0
102.5
47.9
3.3
8.8
9.4
11.8
13.6
13.2
45.4
18.9
1.3
24.0
30.0
34.6
33.5
SEE
CHART
2.8
22.2
SEE
CHART
7.0
115.2
47.9
3.3
Rev.: 07/18/06 B
L
O
2.8
4.6
cm.
7.1
11.8
in.
4.9
6.9
cm.
12.4
17.5
Units Not Shown Above
Right Return End Discharge
Right Return Side Discharge
Left Return End Discharge
Left Return Side Discharge
in.
in.
4.9
7.6
cm.
12.4
19.4
in.
2.8
6.9
cm.
7.1
17.5
Condensate is 3/4" PVC female glue socket and is switchable from side to front
Horizontal unit shipped with deluxe 2" (field adjustable to 1") duct collar/filter rack extending from unit 2.88" and is suitable for duct connection.
Discharge flange is field installed and extends 1" [25.4 mm] from cabinet
Decorative molding and water connections extend 1.2" [30.5mm] beyond front of cabinet.
WaterFurnace works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice. Please contact WaterFurnace at 1-800-478-5667 for latest design and
specifications. Purchaser’s approval of this data set signifies that the equipment is acceptable under the provisions of the job specification. Statements and other information contained herein are not express warranties and do not form the
basis of any bargain between the parties, but are merely WaterFurnace’s opinion or commendation of its products. The latest version of this document is available at www.waterfurnace.com.
SD1585
10/08
11
Page _____ of _____
Contractor:
Engineer:
ENVISION Residential Series
2-6 Tons 60Hz
P.O.:
Project Name:
Unit Tag:
Vertical Dimensional Data
Bottomflow
RIGHT RETURN
LEFT RETURN
1.70
(4.3 cm)
4
3
C
C
2
S
1
S
K
T
J
F
I
T
B
LEFT SIDE
RIGHT SIDE
Q
R
1.90
(4.7 cm)
R
5
Q
A
L
2ft [61cm]
Primary Service Access
N
O
L
O
Ov erall Cabinet
022-030
2
3
4
5
F
G
H
A
B
C
D
E
Width
Depth
Height
In
Out
in.
cm.
22.5
57.2
26.5
67.3
52.5
133.4
35. 3
89. 7
40.2
102.1
in.
25.5
31.5
62.5
43. 4
48.4
57. 0
60.0
3.6
cm.
64.8
80.0
158.8
110. 2
122.9
144.8
152.4
9.1
036-072
RIGHT BOTTOM DISCHARGE
FLOOR FOOT PRINT
Water Connecti ons
1
P
N
LEFT BOTTOM DISCHARGE
FLOOR FOOT PRINT
Bottomflow
Models
Loop
HWG In HWG Out Condensate Water FPT
46. 7
118.6
H
FRONT
M
49.7
126.2
E
D
B
G
3.6
9.1
HWG
FPT
1" Swivel 1" Swivel
1" Swivel 1" Swivel
Electrical Knockouts
Discharge Connection
Return Connection
I
J
K
1/2" cond 1/2" cond 3/4" cond
duct flange installed (±0.10 in)
using std delux e filter rack (±0.10 in)
Low
Voltage
Ext Pump
Power
Supply
41.9
106.4
43.6
110.7
45.1
114.6
L
M
N
Supply
Width
O
Supply
Depth
P
Q
R
Return
Depth
S
Return
Height
T
8.6
21.8
6. 0
15.2
9.3
23.6
10.5
26.7
1.0
2.5
2.2
5.6
22.2
56.4
26.0
66.0
5.6
14.2
48.9
50.8
52.2
9.1
4. 8
13.4
13.6
1.5
1.8
28.1
34.0
5.6
124.2
129.0
132.6
23.1
12.2
34.0
34.5
3.8
4.6
71.4
86.4
14.2
Condensate is 3/4" PVC female glue socket and is switchable from side to front
Vertical bottomflow unit shipped with deluxe 2" (field adjustable to 1") duct collar/filter rack extending from unit 3.25" and is suitable for duct connection.
Decorative molding and water connections extend 1.2" (30.5mm) beyond front of cabinet.
Rev .: 09/27/07
WaterFurnace works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice. Please contact WaterFurnace at 1-800-478-5667 for latest design and
specifications. Purchaser’s approval of this data set signifies that the equipment is acceptable under the provisions of the job specification. Statements and other information contained herein are not express warranties and do not form the
basis of any bargain between the parties, but are merely WaterFurnace’s opinion or commendation of its products. The latest version of this document is available at www.waterfurnace.com.
SD1585
10/08
12
Page _____ of _____
Violet(2)
Blk(1)
NOTE 10
Optional
Electronic
Air-Filter
Optional
Remote Unit
Without
Loop Pump
SL1 Out
SL1 In
C
NOTE 2
NOTE 9
L1
G
O
W
Y2
Y1
C
R
Thermostat
CC
Y
R
C
Violet(3)
Comfort
Alert
Pump
G
CC
CC-GND
NOTE 6
3
LED
On
1
2
3
4
5
6
7
8
Normal Display Mode
Field Selection Dips - #1 On, #6 On, #7 On
Drain pan overflow Lockout
FP thermistor (loop<15°F,well<30°F) Lockout
High Pressure
Low Pressure / Comfort Alert
ECM2 RPM < 100 rpm Lockout
Microprocessor malfunction*
HWL thermistor > 130°F
DHW pump switch off
*Green LED not flashing
Drain
Water Flow
High Press
Low Press / CA
Air Flow
Status
DHW Limit
DHW off
SW3
On
1
2
3
4
5
Main Logic PCB
Outputs
#1 Off, #6 On, #7 On
#6 Off, #7 On #6 On, #7 Off
Drain pan overflow
Y1
Compressor Lo
FP thermistor (loop<15°F, well<30°F)
Y2
Compressor Hi
High Pressure
O
RV
Low Pressure / Comfort Alert
G
FAN
ECM2 RPM < 100 rpm
W
DHW Pump
Not Used
SL1
Loop Pump 1
HWL thermistor > 130°F
SL2
Loop Pump 2
-DHW pump switch off
--
Inputs
Diagnostic Modes
2 Speed / 1 Speed
Normal / Finish on 2nd (Note 7)
No RPM / RPM
Electric Heat / Normal (Note 8)
Envision / E Series or Premier
Current Fault Status
Test / Norm
Loop / Well
Fan / Comp
Dehum / Norm
No Htg3 / Htg3
Inputs / Norm
Outputs / Norm
Pulse L / Constant L (NOTE 9)
P5
Blue
13
#6 Off, #7 Off
Blower Lo
Blower Med
Blower Hi
Aux Heat #1
Aux Heat #2
AuxHeat #3
Aux Heat #4
--
Outputs2
Black
RV
T
T
HP
LP
FP
HWL
Fold and mate arrows
Comfort Alert Status
Description
Module Has Power
Y1 Present But Compressor Not Running
Long Run Time
System Pressure Trip
Short Cycling
Locked Rotor
Open Circuit
Open Start Circuit
Open Run Circuit
Welded Contactor
Low Voltage
Comfort Alert
LED Flash Code
Green
Solid
Red
Solid
Code 1
Code 2
Code 3
Code 4
Yellow
Code 5
Code 6
Code 7
Code 8
Code 9
Black
7
14
Blue
Yellow
5
6
Pink
Yellow
1
Pink
8
12
Orange
Not Used
Not Used
2
L
NOTE 11
3
Orange
Tan
10
9
4
11
L1
Legend
CA CC CO CR1 CR2CR3 CR4 CS F1 and F2 FP HE HP ER1 to ER4 -
Comfort Alert
Compressor Contactor
Condensate overflow sensor
DHW pump relay
Loop pump relay
PSC Fan Speed Relay
PSC Fan Power Relay
Compressor Solenoid
Fuses
Freeze protection sensor
Heater element
High pressure switch
Aux heat stage relays
Fuse
Relay ContactsN.O., N.C.
Ground
Field wire lug
Wire nut
Factory Low voltage wiring
Factory Line voltage wiring
Field low voltage wiring
Field line voltage wiring
Optional block
DC Voltage PCB traces
Internal junction
Quick connect terminal
P
2
1
LP PB1, PB2 PS RV SW1 SW2 SW3 SW4 TS HWL SC SR -
3
G
T
6
Fold and mate arrows
Low pressure switch
Power blocks
Power strip
Reversing Valve coil
DIP package 12 position
DIP package 8 position
DIP package 5 position
Hot water pump enable switch
Thermal limit switch
Hot water limit sensor
Start Contactor
Start Relay
Polarized connector
Switch -Hot Water On/Off
Switch - Low pressure
Switch - High pressure
Switch - Condensate overflow
Capacitor w/ bleed resistor
Relay coil
Light emitting diode - Green
Thermistor
Red
Tan
White
Pink
Blue
Orange
Org
Brn
1 2 3
P4
With optional ' EA' Series
Auxiliary ElectricHeat
Typical schematic shown
240V - L1
240V - L1
6
7
C Y1 Y2 W O G
5
R
4
2
Pink
3
P2
CR3-
Com
N.C.
N.O.
8
2
C
1
Shut
Down
SW2
Off On
1
2
3
4
5
6
7
8
P2
C
3
Microprocessor
5
Blk
Or
Brn
L2
6
1
2
3
4
5
SL1 SL2
Out IN
5
SW3
Off On
SL1
IN
4
L4
4
Yel
Premier 2 Logic Board
1
2
3
4
5
6
7
8
9
10
11
12
L
SW1
Off On
2
P1
N.O.
CR2- Loop
Pump
1
3
C
C
R
R
CC-GND
CC
CCLO
CCHI
CR1- DHW
Pump
N.O.
F1
P10
1
4
5
3
2
E-Series Logic Board - Physical Layout
Grn
1
P9
G
1
SL2
Out
7
6
Gray
L2
L1
L1
NO
ER4
NO
ER3
NO
ER2
NO
ER1
2
3
4
5
6
7
1
2
8
8
1
9
2
10
3
11
4
12
5
13
6
14
7
P3
9
10
11
12
13
14
15
16
Com
3
ACC ACC ACC
NO NC COM
1
CR4-
N.O.
F1
L3
PB2
EA Series PCB
F2
NOTE 5
Auxiliary Electric Heat Power
208-230/60/1
P5
P6
Yel
Pink
C
R
L
Y
HE4
HE3
HE2
HE1
TS1
TS4
TS3
TS2
L2
L2
Unit Power
208-230/60/1
L1
10 - When optional electronic air -filter is installed, power for the electronic air-filter is provided by P 2-2 and
24 VAC.
11- Comfort Alert fault output to Premier Control Board
9 – SW2-8 must be in the OFF position for pulsed “L” lockout signal and in the ON position for constant
“L” lockout signal.
6 - DHW pump only in models with hot water generation option .
7 – This Switch allows the unit to down stage with the t -stat when OFF and finish on second stage when
ON. Finish second stage reduces stage changing in recip dual capacity compressors and should
be ON for unzoned Dual Cap E -Series or Premier 2 speed units.
8 – SW3-4 should be in the OFF position when using the 17P501A01 electric heat board and
should be ON when using the 17P514A01 electric heat board .
4 - The blk/wh and gray/wh wires are removed when Aux Heat is installed .
5 - Buss lugs L1 and L2 can be removed and dual power wire sets connected directly to box lugs L 1, L2,
and L3, L4.
2 - Connection of remote unit that does not have a loop pump for slave operation .
3 - 24V Accessory relay (see SW2 - 3 for description of operation )
Notes:
L2
Circuit Breakers
L1
Aux Elect Power
208-230/60/1
L1
Breaker box
furnished by
installer
Single Disconnect Power
208-230/60/1
CSA installed units only
Local codes may require a single
source of power supply
Pink
Yel
Blk
Gray
1 – Switch Blue and Red wires for 208V operation.
ALERT
TRIP
DC
Sol
Data
Port
POWER
Comfort Alert
Physical Layout
Pink
Yel
4
Blk
3
Gray
Gray
Blk
Yel
Pink
2
1
P7
1
Gray
Blk
2
Blk
Gray
3
Yel
P8
4
Pink
G
Contact waterfurnace.com for additional wiring schematics
Y
R
R
R
R
R
R
G
3
Acc NO
2
2
Acc NC
1
1
7
6
Acc Com
P3
NOTE 3
Used
Not
5
3
4
C
C
SL1 In
SL1 Out
SW1
16
2
Red
Not Used
11
5
4
3
2
P10
1
Tan
8
LO
Shut
Down
7
G
3
6
O
P2
5
W
White
4
1
3
Y2
Pink
2
C
Y1
Blue
16
15
3
P12
Orange
CO
Transformer
Not Used
Blk/Wh
24V
Red Blu
208V 240V
2
Yel
Blk
1
2
3
4
Not Used
5
NOTE 1
Org
5
P11
9
Yellow
Violet
Black
Not Used
4
7
3
PS
1
2
Brn
6
SW2
P6
8
13
C
R
NOTE 4
Blk/Wht(11)
Gry/Wht(10)
240V L1
Brn(15)
L1
15
Blk(7)
CC
10
COM
NC
F1-10A 240V
Org(14)
L2
240V L2
Tan
(16)
Black
8
1
2
3
4
5
6
7
8
9
10
11
12
CR4
Premier 2
Microprocessor
Logic Control
(DC Voltage)
COM
NO
Run
Capacitor
Red
Comfort Alert
10
CR3
NC
240V L2
G
Unit Power
208-230/60/1
Blue
Gray
On
COM
NO
Fused L2
Wht
97P774-06 9/15/08
Blue
ECM2
Air Flow
Settings
CR2
NO
Fused L2
Gry(9)
P13
C
Brown
P4
Pink
Yel(8)
Blk
L
S
12
1
Blu
DHW
Pump
1
M
R
14
1
COM
Blu(17)
1
2
Pink(13)
PB1
2
H
Brn
Wht Cap
Fold and mate arrows
P.O.:
SW4
CR1
NO
3A
Fuse
CCHI
P1
R
Yel(6)
Blk(5)
Pump
Ext Pump
1/2 hp Total
208-230/60/1
Status LED PCB
Grn
F1-10A
240V
Fold and mate arrows
Fused L1
Envision - Single Speed Wiring Schematic - 208-230/60/1
Fused L2
PSC
Fan Motor
Fused L2
13
Fused L2
10/08
Fused L2
SD1585
240V - L2
Project Name:
240V - L2
Contractor:
Engineer:
ENVISION Residential Series
2-6 Tons 60Hz
Unit Tag:
Wiring Schematics - 208-230/60/1 - PSC
WaterFurnace works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice. Please contact WaterFurnace at 1-800-478-5667 for latest design and
specifications. Purchaser’s approval of this data set signifies that the equipment is acceptable under the provisions of the job specification. Statements and other information contained herein are not express warranties and do not form the
basis of any bargain between the parties, but are merely WaterFurnace’s opinion or commendation of its products. The latest version of this document is available at www.waterfurnace.com.
Page _____ of _____
NOTE 10
Optional
Electronic
Air-Filter
Optional
Remote Unit
Without
Loop Pump
SL1 Out
SL1 In
C
NOTE 2
NOTE 9
L1
G
O
W
LED
1
2
3
4
5
2 Speed / 1 Speed
Normal / Finish on 2nd (Note 12)
No RPM / RPM
Old EH & ECM / Normal (Note 8)
Envision / E Series or Premier
Outputs
Not Used
Not Used
Orange
Blue
Pink
6
15
10
9
2
3
Y
R
Normal Display Mode
Main Logic PCB
Inputs
Diagnostic Modes
#1 Off, #6 On, #7 On
#6 Off, #7 On #6 On, #7 Off
Drain pan overflow
Y1
Compressor Lo
FP thermistor (loop<15°F, well<30°F)
Y2
Compressor Hi
High Pressure > 600 PSI
O
RV
Low Pressure < 40 PSI
G
FAN
ECM2 RPM < 100 rpm
W
DHW Pump
Not Used
SL1
Loop Pump 1
HWL thermistor > 130°F
SL2
Loop Pump 2
-DHW pump switch off
--
Current Fault Status
Test / Norm
Loop / Well
Fan / Comp
Dehum / Norm
No Htg3 / Htg3
Inputs / Norm
Outputs / Norm
Pulse L / Constant L
Field Selection Dips - #1 On, #6 On, #7 On
Drain pan overflow Lockout
FP thermistor (loop<15°F,well<30°F) Lockout
High Pressure > 600 PSI Lockout
Low Pressure < 40 PSI Lockout
ECM2 RPM < 100 rpm Lockout
Microprocessor malfunction*
HWL thermistor > 130°F
DHW pump switch off
*Green LED not flashing
Drain
Water Flow
High Press
Low Press / Comp
Air Flow
Status
DHW Limit
DHW off
SW1
NOTE 7
P5
#6 Off, #7 Off
Blower Lo
Blower Med
Blower Hi
Aux Heat #1
Aux Heat #2
AuxHeat #3
Aux Heat #4
--
PS
T
T
RV
Yel
Blk
Blk/Wh
24V
HP
LP
FP
HWL
CO
Transformer
Red Blu
208V 240V
Fold and mate arrows
Comfort Alert Status
Description
Module Has Power
Y1 Present But Compressor Not Running
Long Run Time
System Pressure Trip
Short Cycling
Locked Rotor
Open Circuit
Open Start Circuit
Open Run Circuit
Welded Contactor
Low Voltage
Comfort Alert
LED Flash Code
Green
Solid
Red
Solid
Code 1
Code 2
Code 3
Code 4
Yellow
Code 5
Code 6
Code 7
Code 8
Code 9
Black
Outputs2
Black
7
14
Blue
Blue
13
6
Pink
Yellow
Pink
Yellow
5
8
1
Not Used
3
12
Orange
Not Used
L
NOTE 11
2
Orange
Tan
10
9
4
11
3
CA CC CO CR1 CR2CR3 CR4 F1 and F2 FP HE HP ER1 to ER4 CS -
L1
2
3
C2
3
5
ECM2
Fan Motor
4
Comfort Alert
Compressor Contactor
Condensate overflow sensor
DHW pump relay
Loop pump relay
PSC Fan Speed Relay
PSC Fan Power Relay
Fuses
Freeze protection sensor
Heater element
High pressure switch
Aux heat stage relays
Compressor Solenoid
Fuse
Relay ContactsN.O., N.C.
Ground
Field wire lug
Wire nut
P11
8
P
T
1
LP PB1, PB2 PS RV SW1 SW2 SW3 SW4 TS HWL SC SR -
3
G
6
5
4
3
2
P10
1
P12
2
Legend
15 16 10
Factory Low voltage wiring
Factory Line voltage wiring
Field low voltage wiring
Field line voltage wiring
Optional block
DC Voltage PCB traces
Internal junction
Quick connect terminal
1
Grn
Org
1
Grn
2
3
3
4
5
ECM2
Fan Motor
1 2 3
P4
15 16 10
Fold and mate arrows
Low pressure switch
Power blocks
Power strip
Reversing Valve coil
DIP package 12 position
DIP package 8 position
DIP package 5 position
Hot water pump enable switch
Thermal limit switch
Hot water limit sensor
Start Contactor
Start Relay
Polarized connector
Switch -Hot Water On/Off
Switch - Low pressure
Switch - High pressure
Switch - Condensate overflow
Capacitor w/ bleed resistor
Relay coil
Light emitting diode - Green
Thermistor
Red
Tan
White
Pink
Blue
Orange
Gray
Blue
Yellow
Violet
Black
Org
Brn
P11
Violet
Blu
N.O.
P12
6
7
C Y1 Y2 W O G
5
1
2
3
CR3-
8
2
C
1
Shut
Down
SW2
Off On
1
2
3
4
5
6
7
8
P2
C
3
Microprocessor
5
Blk
6
1
2
3
4
5
SL1 SL2
Out IN
5
SW3
Off On
SL1
IN
4
4
Com
N.C.
N.O.
Premier 2 Logic Board
1
2
3
4
5
6
7
8
9
10
11
12
L
SW1
Off On
R
4
N.O.
CR2- Loop
Pump
2
P1
F1
P10
P2
E-Series Logic Board - Physical Layout
1
3
C
C
R
R
CC-GND
CC
CCLO
CCHI
CR1- DHW
Pump
8
Yel
Or
Pink
Brn
4
L2
5
3
2
L4
SL2
Out
7
6
1
Gray
L1
L1
NO
ER4
NO
ER3
NO
ER2
NO
ER1
1
2
3
4
5
6
7
2
8
8
1
9
2
10
3
11
4
12
5
13
6
14
7
P3
10
11
12
13
14
15
16
9
Com
3
ACC ACC ACC
NO NC COM
1
CR4-
N.O.
F1
L3
PB2
EA Series PCB
F2
NOTE 5
L2
P8
P5
P6
Yel
Pink
C
R
L
Y
HE4
HE3
HE2
HE1
TS4
TS3
TS2
TS1
L2
L1
L2
Unit Power
208-230/60/1
97P774-01 8/9/06
10 - When optional electronic air -filter is installed, power for the electronic air-filter is provided by P 2-2 and
24 VAC.
11- Comfort Alert fault output to Premier Control Board
12 – This Switch allows the unit to down stage with the t -stat when OFF and finish on second stage when
ON. Finish second stage reduces stage changing in recip dual capacity compressores and should
be ON for unzoned Dual Cap E -Series or Premier 2 speed units.
9 – SW2-8 must be in the OFF position for pulsed “L” lockout signal and in the ON position for constant
“L” lockout signal.
6 - DHW pump only in models with hot water generation option .
7 - Air Flow Configuration Example : SW1 configured for dip 1 as low, dip 3 as medium, and dip 5 as high
Speed ECM2 fan
8 – SW3-4 should be in the OFF position when using ECM motor and 17P501A01 electric heat board and
should be ON when using ECM 2 with 17P514A01 electric heat board
4 - The blk/wh and gray/wh wires are removed when Aux Heat is installed .
5 - Buss lugs L1 and L2 can be removed and dual power wire sets connected directly to box lugs L 1, L2,
and L3, L4.
2 - Connection of remote unit that does not have a loop pump for slave operation .
3 - 24V Accessory relay (see SW2 - 3 for description of operation )
Notes:
L2
Circuit Breakers
L1
Aux Elect Power
208-230/60/1
L1
Breaker box
furnished by
installer
Single Disconnect Power
208-230/60/1
CSA installed units only
Local codes may require a single
source of power supply
Pink
Yel
Blk
Gray
1 – Switch Blue and Red wires for 208V operation.
ALERT
TRIP
DC
Sol
Data
Port
POWER
Comfort Alert
Physical Layout
Pink
Yel
4
Blk
3
Gray
Gray
Blk
Yel
Pink
2
1
P7
1
Gray
Blk
2
Gray
3
Blk
4
Yel
Pink
G
Contact waterfurnace.com for additional wiring schematics
R
R
G
R
R
R
3
2
2
Acc NO
1
1
Acc NC
7
6
Acc Com
P3
NOTE 3
Used
Not
5
3
4
C
SL1 In
SL1 Out
NOTE 1
1
2
Brn
Grn
1
P9
G
Auxiliary Electric Heat Power
208-230/60/1
P.O.:
SW4
P4
On
Gray
Brown
12
Blue
14
Yellow
5
Violet
Black
Not Used
4
7
C
Not Used
SW3
P6
8
13
R
16
1
2
3
4
5
6
7
8
Fused L1
2
On
COM
1
SW2
Blk(7)
NC
240V L1
C
1
2
3
4
5
6
7
8
9
10
11
12
CR4
Premier 2
Microprocessor
Logic Control
(DC Voltage)
COM
NO
240V L2
F1-10A 240V
Gry/Wht(10)
Blk/Wht(11)
NOTE 4
Red
CR3
NC
240V L2
Brn(15)
L1
11
On
COM
NO
Fused L2
Org(14)
L2
Shut
Down
ECM2
Air Flow
Settings
CR2
NO
Fused L2
Gry(9)
Tan
(16)
Tan
8
LO
NOTE 6
Yel(8)
Run
Capacitor
White
7
Pink
G
CC
3
6
G
Blu
DHW
Pump
1
Unit Power
208-230/60/1
1
5
O
COM
Blu(17)
1
2
Pink(13)
PB1
P2
4
W
3
2
1
Y2
C
Y1
Y2
CC
CC-GND
Y1
R
CR1
NO
3A
Fuse
CCHI
P1
R
Yel(6)
Blk(5)
Pump
C
Blk(1)
Violet(2)
Violet(3)
Y
R
C
G
Thermostat
CC
Comfort
Alert
Pump
Status LED PCB
2
F1-10A
240V
Comfort Alert
RPM
Ext Pump
1/2 hp Total
208-230/60/1
On/Off
Black
C2
R
On/Off
Red
PWM
Fold and mate arrows
RPM
Blue
RPM grnd
With optional ' EA' Series
Auxiliary ElectricHeat
Typical schematic shown
PWM
240V - L1
RPM grnd
240V - L1
Fold and mate arrows
Fused L1
C
Fused L2
S
Fused L2
14
Fused L2
10/08
Fused L2
SD1585
240V - L2
Project Name:
240V - L2
Contractor:
Engineer:
ENVISION Residential Series
2-6 Tons 60Hz
Unit Tag:
Wiring Schematic - 208-230/60/1 - ECM
WaterFurnace works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice. Please contact WaterFurnace at 1-800-478-5667 for latest design and
specifications. Purchaser’s approval of this data set signifies that the equipment is acceptable under the provisions of the job specification. Statements and other information contained herein are not express warranties and do not form the
basis of any bargain between the parties, but are merely WaterFurnace’s opinion or commendation of its products. The latest version of this document is available at www.waterfurnace.com.
Page _____ of _____
Contractor:
Engineer:
ENVISION Residential Series
2-6 Tons 60Hz
P.O.:
Project Name:
Unit Tag:
Pressure Drop
Single Speed Models
Dual Capacity Models
Pressure Drop (psi)
Pressure Drop (psi)
Model
GPM
30°F
50°F
70°F
90°F
110°F
026 full
load
4.0
6.0
8.0
10.0
1.4
2.8
4.7
7.0
1.3
2.6
4.4
6.6
1.2
2.4
4.1
6.2
1.1
2.3
3.8
5.8
1.0
2.1
3.5
5.3
026 part
load
3.0
5.0
7.0
9.0
0.8
2.0
3.6
5.8
0.7
1.8
3.4
5.5
0.7
1.7
3.2
5.1
0.7
1.6
3.0
4.8
0.6
1.5
2.8
4.4
0.8
1.6
2.6
4.8
038 full
load
5.0
7.0
9.0
11.0
1.2
2.2
3.4
4.9
1.2
2.1
3.2
4.6
1.1
1.9
3.0
4.3
1.0
1.8
2.8
4.0
1.0
1.7
2.6
3.7
0.7
1.8
3.5
5.8
0.6
1.7
3.3
5.4
4.0
038 part 6.0
8.0
load
10.0
0.9
1.7
2.8
4.2
0.8
1.6
2.6
3.9
0.8
1.5
2.5
3.7
0.7
1.4
2.3
3.4
0.7
1.3
2.1
3.2
1.0
2.0
3.4
5.9
0.9
1.9
3.2
5.5
0.8
1.7
3.0
5.1
049 full
load
6.0
9.0
12.0
15.0
1.2
2.4
3.9
5.7
1.2
2.2
3.6
5.3
1.1
2.1
3.4
5.0
1.0
2.0
3.2
4.7
1.0
1.8
2.9
4.3
2.2
3.6
5.3
8.9
2.1
3.4
5.0
8.3
2.0
3.2
4.7
7.8
1.8
2.9
4.3
7.2
5.0
049 part 8.0
11.0
load
14.0
0.9
2.0
3.4
5.0
0.9
1.8
3.1
4.7
0.8
1.7
2.9
4.4
0.8
1.6
2.8
4.1
0.7
1.5
2.5
3.8
2.8
4.0
5.5
9.1
2.6
3.8
5.1
8.5
2.4
3.5
4.8
7.9
2.2
3.3
4.4
7.3
8.0
12.0
16.0
20.0
1.8
3.8
6.5
9.7
1.7
3.5
6.0
9.1
1.6
3.3
5.6
8.5
1.4
3.0
5.2
8.0
1.3
2.8
4.8
7.4
6.0
10.0
064 part
14.0
load
18.0
1.0
2.6
5.0
8.1
0.9
2.5
4.7
7.6
0.9
2.3
4.4
7.1
0.8
2.1
4.1
6.6
0.8
2.0
3.8
6.1
12.0
15.0
18.0
21.0
3.2
4.5
6.0
7.8
3.0
4.2
5.7
7.3
2.8
4.0
5.3
6.8
2.6
3.7
4.9
6.4
2.4
3.4
4.6
5.9
10.0
072 part 13.0
16.0
load
19.0
2.3
3.6
5.0
6.5
2.1
3.3
4.6
6.2
2.0
3.0
4.3
5.8
1.9
2.8
4.0
5.4
1.7
2.6
3.7
5.0
Model
GPM
30°F
50°F
70°F
90°F
110°F
022
3.0
4.5
6.0
8.0
0.9
1.7
2.8
4.7
0.9
1.6
2.7
4.4
0.8
1.5
2.5
4.1
0.7
1.4
2.3
3.9
0.7
1.3
2.2
3.6
030
4.0
6.0
8.0
10.0
1.5
3.0
5.1
7.7
1.4
2.8
4.8
7.2
1.3
2.7
4.5
6.8
1.2
2.5
4.2
6.3
1.1
2.3
3.9
5.8
036
5.0
7.0
9.0
12.0
1.0
2.1
3.6
6.3
1.0
1.9
3.3
5.9
0.9
1.8
3.0
5.5
0.8
1.7
2.8
5.1
042
5.0
8.0
11.0
14.0
0.8
2.1
4.2
7.6
0.7
2.1
4.1
6.7
0.7
1.9
3.8
6.3
048
6.0
9.0
12.0
16.0
1.1
2.3
3.9
6.7
1.0
2.1
3.7
6.3
060
9.0
12.0
15.0
20.0
2.4
3.9
5.7
9.5
070
12.0
15.0
18.0
24.0
3.0
4.4
6.0
9.7
064 full
load
5/30/06
072 full
load
5/30/06
WaterFurnace works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice. Please contact WaterFurnace at 1-800-478-5667 for latest design and
specifications. Purchaser’s approval of this data set signifies that the equipment is acceptable under the provisions of the job specification. Statements and other information contained herein are not express warranties and do not form the
basis of any bargain between the parties, but are merely WaterFurnace’s opinion or commendation of its products. The latest version of this document is available at www.waterfurnace.com.
SD1585
10/08
15
Page _____ of _____
Contractor:
Engineer:
ENVISION Residential Series
2-6 Tons 60Hz
P.O.:
Project Name:
Unit Tag:
Correction Factor Tables
Part Load Air Flow Corrections
Airflow
CFM Per
% of
Ton of Clg
Nominal
240
60
275
69
300
75
325
81
350
88
375
94
400
100
425
106
450
113
475
119
500
125
520
130
Cooling
Heating
Total Cap
Sens Cap
Power
0.922
0.944
0.957
0.970
0.982
0.991
1.000
1.007
1.013
1.017
1.020
1.022
0.778
0.830
0.866
0.900
0.933
0.968
1.000
1.033
1.065
1.099
1.132
1.159
0.956
0.962
0.968
0.974
0.981
0.991
1.000
1.011
1.023
1.037
1.052
1.064
Heat of
Rej
0.924
0.944
0.958
0.970
0.980
0.991
1.000
1.008
1.015
1.022
1.027
1.030
Htg Cap
Power
0.943
0.958
0.968
0.977
0.985
0.993
1.000
1.007
1.012
1.018
1.022
1.025
1.239
1.161
1.115
1.075
1.042
1.018
1.000
0.990
0.987
0.984
0.982
0.979
Heat of
Ext
0.879
0.914
0.937
0.956
0.972
0.988
1.000
1.010
1.018
1.025
1.031
1.034
5/30/06
Full Load Air Flow Corrections
Airflow
CFM Per
% of
Ton of Clg
Nominal
240
60
275
69
300
75
325
81
350
88
375
94
400
100
425
106
450
113
475
119
500
125
520
130
Heating
Cooling
Total Cap
Sens Cap
Power
0.922
0.944
0.959
0.971
0.982
0.992
1.000
1.007
1.012
1.017
1.019
1.020
0.786
0.827
0.860
0.894
0.929
0.965
1.000
1.034
1.065
1.093
1.117
1.132
0.910
0.924
0.937
0.950
0.964
0.982
1.000
1.020
1.042
1.066
1.092
1.113
Heat of
Rej
0.920
0.940
0.955
0.967
0.978
0.990
1.000
1.010
1.018
1.026
1.033
1.038
Htg Cap
Power
0.943
0.958
0.968
0.977
0.985
0.993
1.000
1.007
1.013
1.018
1.023
1.026
1.150
1.105
1.078
1.053
1.031
1.014
1.000
0.990
0.983
0.980
0.978
0.975
Heat of
Ext
0.893
0.922
0.942
0.959
0.973
0.988
1.000
1.011
1.020
1.028
1.034
1.038
5/30/06
Cooling Capacity Corrections (Dual Capacity Full & Part Load; Single Speed)
Entering
Air WB ºF
Total
Clg Cap
Sensible Cooling Capacity Multipliers - Entering DB ºF
60
65
70
75
80
80.6
85
90
95
100
Power
Input
Heat of
Rejection
45
0.719
0.891
1.058
1.128
*
*
*
*
*
*
*
0.898
0.741
50
0.719
0.893
0.980
1.106
*
*
*
*
*
*
*
0.898
0.741
55
0.812
0.629
0.844
60
0.897
1.026
1.172
*
*
*
*
*
*
0.922
0.819
0.820
0.995
1.206
1.238
*
*
*
*
0.955
0.895
65
0.960
0.568
0.810
1.004
1.052
1.227
*
*
*
0.982
0.951
66.2
0.984
0.505
0.743
1.002
1.027
1.151
*
*
*
0.993
0.980
0.463
67
1.000
70
1.047
75
1.148
0.699
1.000
1.011
1.101
1.310
*
*
1.000
1.000
0.599
0.865
0.879
1.007
1.225
1.433
*
1.018
1.029
0.567
0.584
0.734
0.956
1.261
1.476
1.056
1.118
7/20/06
Note: * Sensible capacity equals total capacity at conditions shown.
Heating Capacity Corrections (Dual Capacity Full & Part Load; Single Speed)
Ent Air DB °F
45
50
55
60
65
68
70
75
80
Htg Cap
1.050
1.059
1.043
1.033
1.023
1.009
1.000
1.011
1.000
Heating Corrections
Power
0.749
0.859
0.894
0.947
0.974
0.990
1.000
1.123
1.196
Heat of Ext
1.158
1.130
1.096
1.064
1.030
1.012
1.000
0.970
0.930
7/20/06
WaterFurnace works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice. Please contact WaterFurnace at 1-800-478-5667 for latest design and
specifications. Purchaser’s approval of this data set signifies that the equipment is acceptable under the provisions of the job specification. Statements and other information contained herein are not express warranties and do not form the
basis of any bargain between the parties, but are merely WaterFurnace’s opinion or commendation of its products. The latest version of this document is available at www.waterfurnace.com.
SD1585
10/08
16
Page _____ of _____
Contractor:
Engineer:
ENVISION Residential Series
2-6 Tons 60Hz
P.O.:
Project Name:
Unit Tag:
Correction Factor Tables - (cont.)
Antifreeze Type
Antifreeze
% by wt
EWT - degF [DegC]
Water
Ethylene Glycol
Propylene Glycol
Ethanol
Methanol
Cooling
Capacity
Heating
Capacity
Pressure Drop
90 [32.2]
30 [-1.1]
30 [-1.1]
0
1.000
1.000
1.000
10
0.991
0.973
1.075
20
0.979
0.943
1.163
30
0.965
0.917
1.225
40
0.955
0.890
1.324
50
0.943
0.865
1.419
10
0.981
0.958
1.130
20
0.969
0.913
1.270
30
0.950
0.854
1.433
40
0.937
0.813
1.614
50
0.922
0.770
1.816
10
0.991
0.927
1.242
20
0.972
0.887
1.343
30
0.947
0.856
1.383
40
0.930
0.815
1.523
50
0.911
0.779
1.639
10
0.986
0.957
1.127
20
0.970
0.924
1.197
30
0.951
0.895
1.235
40
0.936
0.863
1.323
50
0.920
0.833
1.399
Warning:
Gray area represents antifreeze
concentrations greater than 35%
by weight and should be avoided
due to the extreme performance
penalty they represent.
WaterFurnace works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice. Please contact WaterFurnace at 1-800-478-5667 for latest design and
specifications. Purchaser’s approval of this data set signifies that the equipment is acceptable under the provisions of the job specification. Statements and other information contained herein are not express warranties and do not form the
basis of any bargain between the parties, but are merely WaterFurnace’s opinion or commendation of its products. The latest version of this document is available at www.waterfurnace.com.
SD1585
10/08
17
Page _____ of _____
Contractor:
Engineer:
ENVISION Residential Series
2-6 Tons 60Hz
P.O.:
Project Name:
Unit Tag:
NS022 - Single Speed - PSC
Capacity Data (700 CFM)
NSV022
single speed
PSC Motor
700 Rated CFM Heating
EWT
°F
700 Rated CFM Cooling
WPD
Flow gpm
20
30
40
50
60
70
80
90
100
110
120
3.0
4.5
6.0
3.0
4.5
6.0
3.0
4.5
6.0
3.0
4.5
6.0
3.0
4.5
6.0
3.0
4.5
6.0
3.0
4.5
6.0
3.0
4.5
6.0
3.0
4.5
6.0
3.0
4.5
6.0
3.0
4.5
6.0
Performance capacities shown in thousands of Btuh.
HEATING - EAT 70°F
PSI
FT
0.9
1.8
2.9
0.9
1.7
2.8
0.9
1.7
2.8
0.9
1.6
2.7
0.8
1.6
2.6
0.8
1.5
2.5
0.8
1.5
2.4
0.7
1.4
2.3
0.7
1.4
2.2
0.7
1.3
2.2
0.7
1.3
2.1
2.2
4.2
6.8
2.1
4.0
6.6
2.0
3.9
6.4
2.0
3.8
6.2
1.9
3.7
6.0
1.8
3.6
5.8
1.8
3.4
5.6
1.7
3.3
5.4
1.7
3.2
5.2
1.6
3.1
5.0
1.5
2.9
4.8
EAT
HC kBtuh Power kW HE kBtuh
LAT °F
COOLING - EAT 80/67 °F
COP
HWC
kBtuh
2.87
1.5
3.35
3.36
1.6
1.6
80/67
80/67
23.4
23.7
3.86
3.89
4.18
4.29
4.35
4.60
4.72
4.77
4.99
5.11
5.15
5.27
5.41
5.45
5.53
5.67
5.71
1.8
1.8
2.0
2.0
2.1
2.2
2.3
2.3
2.5
2.5
2.6
2.8
2.8
2.9
3.1
3.2
3.3
80/67
80/67
80/67
80/67
80/67
80/67
80/67
80/67
80/67
80/67
80/67
80/67
80/67
80/67
80/67
80/67
80/67
24.2
24.5
24.7
25.0
25.2
23.9
24.1
24.4
23.6
23.8
24.0
22.6
22.8
23.0
20.9
21.1
21.3
80/67
80/67
20.2
20.3
80/67
80/67
18.0
18.2
80/67
80/67
16.7
16.9
EAT
TC kBtuh SC kBtuh S/T Ratio Power kW HR kBtuh
Operation not recommended
70
12.9
70
70
15.2
15.4
70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
17.8
18.1
19.4
20.3
20.7
21.8
22.9
23.3
24.3
25.5
25.9
26.6
27.8
28.3
28.8
30.1
30.7
1.32
8.4
87.1
Operation not recommended
1.33
10.7
90.1
1.34
10.8
90.4
Operation not recommended
1.36
13.2
93.6
1.37
13.5
94.0
1.36
14.7
95.6
1.38
15.6
96.8
1.39
15.9
97.3
1.39
17.1
98.9
1.42
18.0
100.3
1.43
18.4
100.8
1.43
19.4
102.2
1.46
20.5
103.8
1.47
20.9
104.3
1.48
21.5
105.1
1.51
22.7
106.8
1.52
23.1
107.4
1.53
23.6
108.1
1.55
24.8
109.8
1.57
25.3
110.5
EER
HWC
kBtuh
28.3
29.5
-----
27.3
28.4
24.4
25.8
26.7
21.4
22.7
23.5
18.9
20.1
20.8
16.2
17.3
17.9
13.5
14.3
14.8
----1.2
1.1
1.1
1.4
1.3
1.3
1.7
1.7
1.6
2.2
2.1
2.0
2.7
2.6
2.4
12.2
12.6
3.2
3.0
9.7
10.1
3.9
3.7
8.0
8.3
4.7
4.4
Operation not recommended
Operation not recommended
Operation not recommended
0.75
0.83
26.2
0.74
0.80
26.4
Operation not recommended
17.4
0.72
0.89
27.2
17.4
0.71
0.86
27.4
17.1
0.69
1.01
28.2
17.3
0.69
0.97
28.3
17.3
0.68
0.94
28.4
16.9
0.71
1.11
27.7
17.1
0.71
1.06
27.8
17.1
0.70
1.04
27.9
16.7
0.71
1.25
27.8
16.9
0.71
1.19
27.9
16.9
0.70
1.15
28.0
16.4
0.73
1.39
27.3
16.6
0.73
1.32
27.3
16.6
0.72
1.29
27.4
15.9
0.76
1.55
26.2
16.1
0.77
1.47
26.1
16.1
0.76
1.44
26.2
Operation not recommended
15.7
0.78
1.66
25.8
15.7
0.77
1.61
25.9
Operation not recommended
15.2
0.84
1.85
24.3
15.2
0.83
1.80
24.3
Operation not recommended
14.6
0.88
2.08
23.8
14.6
0.87
2.02
23.8
17.4
17.4
WaterFurnace works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice. Please contact WaterFurnace at 1-800-478-5667 for latest design and
specifications. Purchaser’s approval of this data set signifies that the equipment is acceptable under the provisions of the job specification. Statements and other information contained herein are not express warranties and do not form the
basis of any bargain between the parties, but are merely WaterFurnace’s opinion or commendation of its products. The latest version of this document is available at www.waterfurnace.com.
SD1585
10/08
18
Page _____ of _____
Contractor:
Engineer:
ENVISION Residential Series
2-6 Tons 60Hz
P.O.:
Project Name:
Unit Tag:
NS030 - Single Speed - PSC
Capacity Data (900 CFM)
NSV030
single speed
PSC Motor
900 Rated CFM Heating
EWT
°F
900 Rated CFM Cooling
WPD
Flow gpm
20
30
40
50
60
70
80
90
100
110
120
4.0
6.0
8.0
4.0
6.0
8.0
4.0
6.0
8.0
4.0
6.0
8.0
4.0
6.0
8.0
4.0
6.0
8.0
4.0
6.0
8.0
4.0
6.0
8.0
4.0
6.0
8.0
4.0
6.0
8.0
4.0
6.0
8.0
Performance capacities shown in thousands of Btuh.
HEATING - EAT 70°F
PSI
FT
1.5
3.1
5.2
1.5
3.0
5.1
1.4
2.9
4.9
1.4
2.8
4.8
1.4
2.8
4.6
1.3
2.7
4.5
1.3
2.6
4.3
1.2
2.5
4.2
3.5
7.2
12.1
3.4
7.0
11.8
3.3
6.8
11.4
3.2
6.6
11.1
3.1
6.4
10.7
3.0
6.2
10.4
2.9
5.9
10.0
2.8
5.7
9.6
1.2
2.4
4.0
1.1
2.3
3.9
1.1
2.2
3.7
2.7
5.5
9.3
2.6
5.3
8.9
2.5
5.1
8.6
EAT
HC kBtuh Power kW HE kBtuh
LAT °F
COOLING - EAT 80/67 °F
COP
HWC
kBtuh
3.09
2.0
3.57
3.61
2.2
2.2
80/67
80/67
26.4
26.9
4.07
4.12
4.36
4.49
4.55
4.75
4.89
4.93
5.08
5.22
5.24
5.32
5.46
5.48
5.51
5.64
5.66
2.4
2.5
2.6
2.7
2.8
3.0
3.0
3.1
3.3
3.4
3.5
3.7
3.8
3.9
4.2
4.3
4.4
80/67
80/67
80/67
80/67
80/67
80/67
80/67
80/67
80/67
80/67
80/67
80/67
80/67
80/67
80/67
80/67
80/67
28.7
29.1
30.7
30.8
31.2
30.0
30.0
30.4
30.1
30.2
30.6
28.9
29.0
29.3
26.7
26.9
27.1
80/67
80/67
25.6
25.9
80/67
80/67
21.7
22.0
80/67
80/67
21.0
21.3
EAT
TC kBtuh SC kBtuh S/T Ratio Power kW HR kBtuh
Operation not recommended
70
17.6
70
70
20.2
20.7
70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
23.7
24.2
25.9
26.8
27.4
29.1
30.1
30.7
32.4
33.5
34.1
35.1
36.4
36.9
37.9
39.3
39.9
1.67
11.9
88.1
Operation not recommended
1.66
14.6
90.8
1.68
14.9
91.2
Operation not recommended
1.70
17.9
94.4
1.72
18.3
94.9
1.74
20.0
96.6
1.75
20.8
97.6
1.76
21.3
98.1
1.80
23.0
99.9
1.81
23.9
101.0
1.82
24.5
101.6
1.87
26.0
103.3
1.88
27.1
104.5
1.90
27.6
105.1
1.93
28.5
106.1
1.95
29.7
107.4
1.98
30.2
108.0
2.01
31.0
108.9
2.04
32.3
110.4
2.06
32.8
111.0
EER
HWC
kBtuh
24.9
26.1
-----
25.1
26.1
23.8
24.7
25.5
21.4
22.2
22.9
19.5
20.3
20.9
17.0
17.7
18.2
14.3
14.9
15.3
----1.5
1.4
1.4
1.8
1.7
1.6
2.2
2.1
2.0
2.8
2.7
2.5
3.5
3.3
3.2
12.8
13.1
4.1
3.9
9.8
10.1
5.0
4.7
8.5
8.8
6.0
5.7
Operation not recommended
Operation not recommended
Operation not recommended
0.71
1.06
30.0
0.70
1.03
30.4
Operation not recommended
20.4
0.71
1.14
32.6
20.3
0.70
1.11
32.9
21.8
0.71
1.29
35.1
21.9
0.71
1.25
35.0
21.9
0.70
1.22
35.3
21.4
0.72
1.40
34.7
21.5
0.71
1.35
34.7
21.5
0.71
1.32
34.9
21.7
0.72
1.54
35.4
21.7
0.72
1.49
35.3
21.8
0.71
1.46
35.5
21.4
0.74
1.70
34.7
21.4
0.74
1.64
34.6
21.5
0.73
1.61
34.8
20.2
0.76
1.87
33.1
20.2
0.75
1.80
33.0
20.3
0.75
1.77
33.2
18.9
18.8
Operation not recommended
0.79
2.01
32.5
0.78
1.97
32.6
Operation not recommended
18.9
0.87
2.22
29.3
19.0
0.87
2.17
29.4
Operation not recommended
18.3
0.87
2.47
29.5
18.3
0.86
2.42
29.5
20.2
20.3
WaterFurnace works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice. Please contact WaterFurnace at 1-800-478-5667 for latest design and
specifications. Purchaser’s approval of this data set signifies that the equipment is acceptable under the provisions of the job specification. Statements and other information contained herein are not express warranties and do not form the
basis of any bargain between the parties, but are merely WaterFurnace’s opinion or commendation of its products. The latest version of this document is available at www.waterfurnace.com.
SD1585
10/08
19
Page _____ of _____
Contractor:
Engineer:
ENVISION Residential Series
2-6 Tons 60Hz
P.O.:
Project Name:
Unit Tag:
NS036 - Single Speed - PSC
Capacity Data (1250 CFM)
NSV036
single speed
PSC Motor
1250 Rated CFM Heating
EWT
°F
1250 Rated CFM Cooling
WPD
Flow gpm
20
30
40
50
60
70
80
90
100
110
120
5.0
7.0
9.0
5.0
7.0
9.0
5.0
7.0
9.0
5.0
7.0
9.0
5.0
7.0
9.0
5.0
7.0
9.0
5.0
7.0
9.0
5.0
7.0
9.0
5.0
7.0
9.0
5.0
7.0
9.0
5.0
7.0
9.0
Performance capacities shown in thousands of Btuh.
HEATING - EAT 70°F
PSI
FT
1.0
2.1
3.6
1.0
2.1
3.5
1.0
2.0
3.4
1.0
1.9
3.3
0.9
1.9
3.1
0.9
1.8
3.0
0.9
1.7
2.9
0.8
1.7
2.8
0.8
1.6
2.7
0.8
1.6
2.6
0.7
1.5
2.5
2.4
4.9
8.2
2.3
4.7
8.0
2.3
4.6
7.8
2.2
4.5
7.5
2.1
4.3
7.3
2.1
4.2
7.0
2.0
4.0
6.8
1.9
3.9
6.6
1.8
3.8
6.3
1.8
3.6
6.1
1.7
3.5
5.8
EAT
HC kBtuh Power kW HE kBtuh
LAT °F
COOLING - EAT 80/67 °F
COP
HWC
kBtuh
3.21
2.4
3.60
3.64
2.6
2.7
80/67
80/67
30.3
30.8
4.09
4.14
4.37
4.51
4.56
4.81
4.95
4.99
5.24
5.38
5.41
5.57
5.71
5.73
5.89
6.03
6.05
3.0
3.0
3.2
3.3
3.4
3.6
3.7
3.8
4.1
4.2
4.3
4.6
4.7
4.8
5.1
5.3
5.4
80/67
80/67
80/67
80/67
80/67
80/67
80/67
80/67
80/67
80/67
80/67
80/67
80/67
80/67
80/67
80/67
80/67
33.3
33.8
35.9
36.0
36.5
35.7
35.8
36.2
36.2
36.3
36.7
35.3
35.4
35.8
33.1
33.3
33.6
80/67
80/67
32.3
32.7
80/67
80/67
29.1
29.4
80/67
80/67
27.2
27.6
EAT
TC kBtuh SC kBtuh S/T Ratio Power kW HR kBtuh
Operation not recommended
70
21.8
70
70
24.5
25.0
70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
28.4
29.0
30.9
32.0
32.6
34.7
35.9
36.6
38.6
40.0
40.7
41.8
43.4
44.1
45.3
47.0
47.7
1.99
15.0
86.1
Operation not recommended
1.99
17.7
88.1
2.01
18.1
88.5
Operation not recommended
2.04
21.5
91.1
2.06
22.0
91.5
2.07
23.8
92.9
2.08
24.9
93.7
2.10
25.5
94.2
2.11
27.5
95.7
2.12
28.6
96.6
2.15
29.2
97.1
2.16
31.3
98.6
2.18
32.6
99.6
2.20
33.2
100.1
2.20
34.3
101.0
2.23
35.8
102.1
2.25
36.4
102.6
2.25
37.6
103.5
2.28
39.2
104.8
2.31
39.8
105.3
EER
HWC
kBtuh
23.9
25.1
-----
24.3
25.3
23.3
24.1
25.0
21.4
22.2
22.9
19.7
20.5
21.2
17.6
18.3
18.9
15.1
15.8
16.2
----1.7
1.6
1.6
2.1
2.0
1.9
2.6
2.5
2.4
3.3
3.1
3.0
4.1
3.9
3.7
13.8
14.2
4.8
4.6
11.3
11.7
5.9
5.6
9.6
9.9
7.1
6.7
Operation not recommended
Operation not recommended
Operation not recommended
0.72
1.27
34.7
0.70
1.23
35.0
Operation not recommended
24.2
0.73
1.37
38.0
24.1
0.71
1.33
38.3
26.2
0.73
1.55
41.2
26.3
0.73
1.49
41.1
26.3
0.72
1.46
41.5
26.8
0.75
1.67
41.4
26.8
0.75
1.61
41.2
26.9
0.74
1.58
41.6
27.8
0.77
1.83
42.4
27.8
0.77
1.77
42.3
27.9
0.76
1.73
42.6
27.7
0.78
2.01
42.1
27.7
0.78
1.93
42.0
27.8
0.78
1.90
42.3
26.8
0.81
2.19
40.6
26.8
0.81
2.11
40.5
27.0
0.80
2.08
40.7
21.8
21.7
Operation not recommended
0.82
2.34
40.3
0.82
2.29
40.5
Operation not recommended
24.7
0.85
2.57
37.8
24.8
0.85
2.51
38.0
Operation not recommended
24.4
0.89
2.84
36.9
24.4
0.89
2.78
37.0
26.6
26.7
WaterFurnace works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice. Please contact WaterFurnace at 1-800-478-5667 for latest design and
specifications. Purchaser’s approval of this data set signifies that the equipment is acceptable under the provisions of the job specification. Statements and other information contained herein are not express warranties and do not form the
basis of any bargain between the parties, but are merely WaterFurnace’s opinion or commendation of its products. The latest version of this document is available at www.waterfurnace.com.
SD1585
10/08
20
Page _____ of _____
Contractor:
Engineer:
ENVISION Residential Series
2-6 Tons 60Hz
P.O.:
Project Name:
Unit Tag:
NS042 - Single Speed - PSC
Capacity Data (1350 CFM)
NSV042
single speed
PSC Motor
1350 Rated CFM Heating
EWT
°F
1350 Rated CFM Cooling
WPD
Flow gpm
20
30
40
50
60
70
80
90
100
110
120
5.0
8.0
11.0
5.0
8.0
11.0
5.0
8.0
11.0
5.0
8.0
11.0
5.0
8.0
11.0
5.0
8.0
11.0
5.0
8.0
11.0
5.0
8.0
11.0
5.0
8.0
11.0
5.0
8.0
11.0
5.0
8.0
11.0
Performance capacities shown in thousands of Btuh.
HEATING - EAT 70°F
PSI
FT
0.8
2.3
4.4
0.8
2.2
4.3
0.8
2.1
4.2
0.7
2.1
4.1
0.7
2.0
3.9
0.7
1.9
3.8
0.7
1.9
3.7
0.7
1.8
3.5
0.6
1.7
3.4
0.6
1.7
3.3
0.6
1.6
3.2
1.9
5.3
10.3
1.8
5.1
10.0
1.8
4.9
9.7
1.7
4.8
9.4
1.7
4.6
9.1
1.6
4.5
8.8
1.6
4.3
8.5
1.5
4.2
8.2
1.5
4.0
7.9
1.4
3.9
7.6
1.3
3.7
7.3
EAT
HC kBtuh Power kW HE kBtuh
LAT °F
COOLING - EAT 80/67 °F
COP
HWC
kBtuh
3.09
3.7
3.51
3.56
3.9
4.0
80/67
80/67
41.0
41.4
3.88
3.94
4.16
4.26
4.33
4.48
4.58
4.66
4.76
4.86
4.94
5.09
5.18
5.28
5.37
5.47
5.57
4.3
4.4
4.7
4.8
5.0
5.3
5.4
5.6
6.0
6.1
6.3
6.7
6.9
7.1
7.5
7.8
8.0
80/67
80/67
80/67
80/67
80/67
80/67
80/67
80/67
80/67
80/67
80/67
80/67
80/67
80/67
80/67
80/67
80/67
42.7
43.1
43.3
43.8
44.2
43.1
43.6
44.1
43.1
43.8
44.3
41.4
42.1
42.6
39.0
39.8
40.2
80/67
80/67
38.2
38.6
80/67
80/67
34.6
35.0
80/67
80/67
32.5
32.8
EAT
TC kBtuh SC kBtuh S/T Ratio Power kW HR kBtuh
Operation not recommended
70
25.4
70
70
29.3
29.7
70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
33.3
33.9
35.8
37.3
38.0
39.3
41.1
42.0
42.7
44.8
45.9
45.9
48.4
49.8
49.1
51.8
53.5
2.41
17.1
87.4
Operation not recommended
2.45
21.0
90.1
2.45
21.4
90.4
Operation not recommended
2.52
24.7
92.9
2.52
25.3
93.3
2.52
27.2
94.6
2.57
28.5
95.6
2.58
29.3
96.1
2.57
30.5
97.0
2.63
32.1
98.2
2.65
33.0
98.8
2.63
33.7
99.3
2.70
35.5
100.7
2.73
36.6
101.5
2.65
36.9
101.5
2.73
39.0
103.2
2.77
40.3
104.1
2.68
40.0
103.7
2.78
42.4
105.6
2.82
43.9
106.7
EER
HWC
kBtuh
23.3
24.1
-----
23.1
23.9
21.1
22.2
23.0
19.4
20.5
21.3
17.9
19.0
19.7
15.6
16.7
17.3
13.4
14.4
14.9
----2.6
2.5
2.4
3.2
3.0
2.9
4.0
3.8
3.6
5.1
4.8
4.6
6.4
6.1
5.8
12.6
13.0
7.5
7.2
10.3
10.7
9.2
8.8
8.8
9.2
11.1
10.6
Operation not recommended
Operation not recommended
Operation not recommended
0.69
1.76
47.0
0.68
1.72
47.3
Operation not recommended
30.3
0.71
1.85
49.0
30.3
0.70
1.80
49.3
31.3
0.72
2.05
50.3
31.6
0.72
1.97
50.5
31.6
0.71
1.92
50.8
32.0
0.74
2.22
50.6
32.4
0.74
2.12
50.9
32.4
0.73
2.07
51.1
33.1
0.77
2.41
51.4
33.4
0.76
2.31
51.7
33.4
0.75
2.25
51.9
32.3
0.78
2.64
50.4
32.6
0.77
2.52
50.7
32.6
0.77
2.46
50.9
31.4
0.80
2.91
48.9
31.7
0.80
2.77
49.3
31.7
0.79
2.70
49.4
28.4
28.4
Operation not recommended
0.81
3.04
48.6
0.81
2.96
48.7
Operation not recommended
28.8
0.83
3.35
46.1
28.8
0.82
3.26
46.1
Operation not recommended
28.4
0.88
3.68
45.1
28.4
0.87
3.58
45.1
31.1
31.1
WaterFurnace works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice. Please contact WaterFurnace at 1-800-478-5667 for latest design and
specifications. Purchaser’s approval of this data set signifies that the equipment is acceptable under the provisions of the job specification. Statements and other information contained herein are not express warranties and do not form the
basis of any bargain between the parties, but are merely WaterFurnace’s opinion or commendation of its products. The latest version of this document is available at www.waterfurnace.com.
SD1585
10/08
21
Page _____ of _____
Contractor:
Engineer:
ENVISION Residential Series
2-6 Tons 60Hz
P.O.:
Project Name:
Unit Tag:
NS048 - Single Speed - PSC
Capacity Data (1500 CFM)
NSV048
single speed
PSC Motor
1500 Rated CFM Heating
EWT
°F
1500 Rated CFM Cooling
WPD
Flow gpm
20
30
40
50
60
70
80
90
100
110
120
6.0
9.0
12.0
6.0
9.0
12.0
6.0
9.0
12.0
6.0
9.0
12.0
6.0
9.0
12.0
6.0
9.0
12.0
6.0
9.0
12.0
6.0
9.0
12.0
6.0
9.0
12.0
6.0
9.0
12.0
6.0
9.0
12.0
Performance capacities shown in thousands of Btuh.
HEATING - EAT 70°F
PSI
FT
1.1
2.3
4.0
1.1
2.3
3.9
1.1
2.2
3.8
1.0
2.1
3.7
1.0
2.1
3.5
1.0
2.0
3.4
0.9
1.9
3.3
0.9
1.9
3.2
0.9
1.8
3.1
0.8
1.7
3.0
0.8
1.7
2.8
2.6
5.4
9.2
2.5
5.3
9.0
2.5
5.1
8.7
2.4
4.9
8.4
2.3
4.8
8.2
2.2
4.6
7.9
2.1
4.5
7.6
2.1
4.3
7.4
2.0
4.2
7.1
1.9
4.0
6.8
1.8
3.8
6.6
EAT
HC kBtuh Power kW HE kBtuh
LAT °F
COOLING - EAT 80/67 °F
COP
HWC
kBtuh
3.15
4.8
3.51
3.56
5.2
5.3
80/67
80/67
49.7
50.2
3.90
3.96
4.16
4.25
4.31
4.48
4.57
4.64
4.78
4.87
4.95
5.03
5.11
5.20
5.26
5.35
5.44
5.7
5.8
6.2
6.4
6.5
7.0
7.2
7.4
7.9
8.1
8.3
8.8
9.1
9.4
9.9
10.2
10.6
80/67
80/67
80/67
80/67
80/67
80/67
80/67
80/67
80/67
80/67
80/67
80/67
80/67
80/67
80/67
80/67
80/67
51.5
52.1
52.5
53.1
53.6
51.1
51.8
52.3
50.8
51.5
52.1
48.5
49.4
49.9
45.1
46.0
46.5
80/67
80/67
44.3
44.8
80/67
80/67
39.9
40.3
80/67
80/67
37.6
38.0
EAT
TC kBtuh SC kBtuh S/T Ratio Power kW HR kBtuh
Operation not recommended
70
32.8
70
70
37.5
38.0
70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
43.0
43.8
46.2
48.1
49.0
50.8
53.1
54.4
55.5
58.2
59.7
59.4
62.5
64.3
63.2
66.8
68.9
3.05
22.4
90.2
Operation not recommended
3.13
26.8
93.1
3.13
27.3
93.5
Operation not recommended
3.23
32.0
96.6
3.24
32.7
97.0
3.26
35.1
98.5
3.32
36.7
99.7
3.33
37.7
100.3
3.33
39.5
101.4
3.41
41.5
102.8
3.43
42.7
103.6
3.41
43.9
104.3
3.51
46.3
105.9
3.54
47.7
106.9
3.46
47.5
106.6
3.58
50.3
108.6
3.62
51.9
109.7
3.52
51.2
109.0
3.66
54.3
111.2
3.71
56.2
112.5
EER
HWC
kBtuh
25.6
26.6
-----
24.5
25.5
21.9
23.1
23.9
19.4
20.6
21.4
17.4
18.6
19.3
15.0
16.1
16.7
12.6
13.6
14.1
----3.1
2.9
2.8
3.7
3.6
3.4
4.7
4.5
4.2
5.9
5.6
5.4
7.4
7.1
6.7
11.8
12.3
8.8
8.4
9.6
10.0
10.8
10.2
8.2
8.5
13.0
12.4
Operation not recommended
Operation not recommended
Operation not recommended
0.69
1.94
56.3
0.68
1.89
56.6
Operation not recommended
36.0
0.70
2.10
58.7
36.0
0.69
2.05
59.0
37.4
0.71
2.40
60.7
37.8
0.71
2.30
60.9
37.8
0.70
2.24
61.3
37.0
0.72
2.63
60.1
37.3
0.72
2.52
60.4
37.3
0.71
2.45
60.7
37.4
0.74
2.91
60.7
37.8
0.73
2.78
61.0
37.8
0.73
2.70
61.3
36.6
0.75
3.23
59.5
36.9
0.75
3.07
59.8
36.9
0.74
2.99
60.1
34.9
0.77
3.57
57.3
35.2
0.77
3.39
57.6
35.2
0.76
3.30
57.7
34.1
34.1
Operation not recommended
0.78
3.76
57.1
0.78
3.65
57.2
Operation not recommended
32.3
0.81
4.15
54.0
32.3
0.80
4.03
54.0
Operation not recommended
31.7
0.84
4.59
53.3
31.7
0.83
4.46
53.2
34.8
34.8
WaterFurnace works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice. Please contact WaterFurnace at 1-800-478-5667 for latest design and
specifications. Purchaser’s approval of this data set signifies that the equipment is acceptable under the provisions of the job specification. Statements and other information contained herein are not express warranties and do not form the
basis of any bargain between the parties, but are merely WaterFurnace’s opinion or commendation of its products. The latest version of this document is available at www.waterfurnace.com.
SD1585
10/08
22
Page _____ of _____
Contractor:
Engineer:
ENVISION Residential Series
2-6 Tons 60Hz
P.O.:
Project Name:
Unit Tag:
NS060 - Single Speed - PSC
Capacity Data (2000 CFM)
NSV060
single speed
PSC Motor
2000 Rated CFM Heating
EWT
°F
2000 Rated CFM Cooling
WPD
Flow gpm
20
30
40
50
60
70
80
90
100
110
120
9.0
12.0
15.0
9.0
12.0
15.0
9.0
12.0
15.0
9.0
12.0
15.0
9.0
12.0
15.0
9.0
12.0
15.0
9.0
12.0
15.0
9.0
12.0
15.0
9.0
12.0
15.0
9.0
12.0
15.0
9.0
12.0
15.0
Performance capacities shown in thousands of Btuh.
HEATING - EAT 70°F
PSI
FT
2.5
4.0
5.9
2.4
3.9
5.7
2.3
3.7
5.5
2.2
3.6
5.3
2.2
3.5
5.2
2.1
3.4
5.0
2.0
3.3
4.8
2.0
3.2
4.7
1.9
3.1
4.5
1.8
2.9
4.3
1.7
2.8
4.2
5.7
9.2
13.5
5.5
8.9
13.1
5.3
8.7
12.7
5.2
8.4
12.3
5.0
8.1
11.9
4.9
7.9
11.6
4.7
7.6
11.2
4.5
7.3
10.8
4.4
7.1
10.4
4.2
6.8
10.0
4.0
6.5
9.6
EAT
HC kBtuh Power kW HE kBtuh
LAT °F
COOLING - EAT 80/67 °F
COP
HWC
kBtuh
2.89
5.8
3.24
3.26
6.2
6.4
80/67
80/67
70.2
71.4
3.67
3.70
3.93
4.00
4.03
4.25
4.30
4.36
4.54
4.58
4.66
4.73
4.87
4.86
4.91
5.14
5.04
6.9
7.1
7.5
7.7
7.9
8.4
8.7
8.9
9.5
9.8
10.0
10.7
11.0
11.3
12.0
12.4
12.8
80/67
80/67
80/67
80/67
80/67
80/67
80/67
80/67
80/67
80/67
80/67
80/67
80/67
80/67
80/67
80/67
80/67
71.7
72.6
72.9
72.9
73.6
70.5
70.8
71.2
69.2
69.9
69.9
66.1
66.8
67.1
61.6
62.2
62.8
80/67
80/67
59.7
60.3
80/67
80/67
54.5
55.1
80/67
80/67
50.8
51.7
EAT
TC kBtuh SC kBtuh S/T Ratio Power kW HR kBtuh
Operation not recommended
70
39.6
70
70
44.5
45.9
70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
52.5
53.7
57.8
59.2
60.3
64.1
65.5
67.3
70.6
71.9
74.6
75.2
77.8
79.9
80.0
83.9
85.5
4.02
25.9
88.3
Operation not recommended
4.02
30.8
90.6
4.12
31.8
91.2
Operation not recommended
4.19
38.2
94.3
4.26
39.2
94.9
4.30
43.1
96.7
4.34
44.4
97.4
4.38
45.3
97.9
4.42
49.0
99.7
4.47
50.3
100.3
4.53
51.9
101.2
4.56
55.1
102.7
4.60
56.2
103.3
4.69
58.6
104.5
4.66
59.3
104.8
4.68
61.8
106.0
4.82
63.5
107.0
4.78
63.7
107.1
4.78
67.6
108.8
4.97
68.5
109.6
EER
HWC
kBtuh
24.2
26.1
-----
23.1
24.6
21.2
21.6
22.8
19.4
20.1
20.9
17.4
18.2
18.7
15.2
16.0
16.6
13.0
13.8
14.4
----4.1
3.9
3.7
5.0
4.8
4.6
6.3
6.0
5.7
8.0
7.6
7.2
10.0
9.5
9.1
11.9
12.4
11.8
11.2
10.0
10.4
14.5
13.8
8.3
8.7
17.5
16.7
Operation not recommended
Operation not recommended
Operation not recommended
0.69
2.91
80.2
0.67
2.74
80.8
Operation not recommended
49.8
0.69
3.10
82.3
49.6
0.68
2.95
82.6
50.5
0.69
3.44
84.6
51.0
0.70
3.38
84.4
51.0
0.69
3.23
84.7
49.4
0.70
3.63
82.9
49.6
0.70
3.53
82.9
49.9
0.70
3.41
82.8
49.4
0.71
3.97
82.7
49.4
0.71
3.83
83.0
49.9
0.71
3.73
82.6
48.0
0.73
4.35
80.9
48.0
0.72
4.16
81.0
48.5
0.72
4.05
80.9
45.8
0.74
4.74
77.7
45.8
0.74
4.49
77.5
46.3
0.74
4.37
77.7
48.6
48.1
Operation not recommended
0.75
4.99
76.7
0.76
4.87
76.9
Operation not recommended
41.8
0.77
5.43
73.0
42.3
0.77
5.30
73.1
Operation not recommended
41.5
0.82
6.09
71.6
41.9
0.81
5.92
71.9
45.0
45.5
WaterFurnace works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice. Please contact WaterFurnace at 1-800-478-5667 for latest design and
specifications. Purchaser’s approval of this data set signifies that the equipment is acceptable under the provisions of the job specification. Statements and other information contained herein are not express warranties and do not form the
basis of any bargain between the parties, but are merely WaterFurnace’s opinion or commendation of its products. The latest version of this document is available at www.waterfurnace.com.
SD1585
10/08
23
Page _____ of _____
Contractor:
Engineer:
ENVISION Residential Series
2-6 Tons 60Hz
P.O.:
Project Name:
Unit Tag:
NS070 - Single Speed - PSC
Capacity Data (2200 CFM)
NSV070
single speed
PSC Motor
2200 Rated CFM Heating
EWT
°F
2200 Rated CFM Cooling
WPD
Flow gpm
20
30
40
50
60
70
80
90
100
110
120
12.0
15.0
18.0
12.0
15.0
18.0
12.0
15.0
18.0
12.0
15.0
18.0
12.0
15.0
18.0
12.0
15.0
18.0
12.0
15.0
18.0
12.0
15.0
18.0
12.0
15.0
18.0
12.0
15.0
18.0
12.0
15.0
18.0
Performance capacities shown in thousands of Btuh.
HEATING - EAT 70°F
PSI
FT
3.0
4.4
6.0
3.0
4.3
5.8
2.9
4.1
5.7
2.8
4.0
5.5
2.7
3.9
5.3
2.6
3.8
5.1
2.5
3.6
5.0
2.4
3.5
4.8
2.3
3.4
4.6
2.2
3.3
4.4
2.2
3.1
4.3
7.0
10.2
13.9
6.8
9.9
13.5
6.6
9.6
13.1
6.4
9.3
12.7
6.2
9.0
12.3
6.0
8.7
11.9
5.8
8.4
11.5
5.6
8.1
11.1
5.4
7.8
10.7
5.2
7.5
10.2
5.0
7.2
9.8
EAT
HC kBtuh Power kW HE kBtuh
LAT °F
COOLING - EAT 80/67 °F
COP
HWC
kBtuh
2.97
6.9
3.34
3.34
7.4
7.6
80/67
80/67
73.6
74.0
3.77
3.78
4.07
4.12
4.13
4.38
4.46
4.48
4.69
4.79
4.82
4.88
5.00
5.05
5.06
5.22
5.27
8.2
8.4
8.9
9.2
9.4
10.0
10.3
10.6
11.3
11.6
11.9
12.7
13.1
13.5
14.3
14.7
15.2
80/67
80/67
80/67
80/67
80/67
80/67
80/67
80/67
80/67
80/67
80/67
80/67
80/67
80/67
80/67
80/67
80/67
77.3
77.9
80.7
81.2
82.0
77.3
77.7
78.7
76.8
77.1
78.2
73.3
73.6
74.8
67.0
67.2
68.6
80/67
80/67
65.0
66.4
80/67
80/67
57.4
58.8
80/67
80/67
54.2
55.7
EAT
TC kBtuh SC kBtuh S/T Ratio Power kW HR kBtuh
Operation not recommended
70
46.0
70
70
53.0
53.2
70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
61.8
62.2
68.1
69.5
70.1
75.6
77.8
78.7
83.4
86.4
87.7
89.2
93.3
94.9
95.4
100.5
102.5
4.54
30.5
89.4
Operation not recommended
4.65
37.2
92.3
4.66
37.3
92.4
Operation not recommended
4.80
45.5
96.0
4.82
45.8
96.2
4.91
51.4
98.7
4.95
52.7
99.3
4.97
53.2
99.5
5.06
58.3
101.8
5.11
60.3
102.7
5.14
61.2
103.1
5.22
65.6
105.1
5.29
68.4
106.4
5.33
69.5
106.9
5.36
70.9
107.5
5.46
74.6
109.3
5.51
76.1
109.9
5.52
76.5
110.1
5.64
81.2
112.3
5.70
83.0
113.1
EER
HWC
kBtuh
25.6
25.8
-----
24.9
25.2
23.0
23.8
24.3
20.3
21.0
21.5
18.3
18.9
19.5
15.9
16.4
17.0
13.2
13.6
14.2
----4.5
4.3
4.1
5.5
5.2
5.0
6.9
6.6
6.3
8.7
8.3
7.9
10.9
10.4
9.9
11.9
12.5
13.0
12.3
9.5
10.1
15.9
15.1
8.1
8.6
19.2
18.2
Operation not recommended
Operation not recommended
Operation not recommended
0.68
2.87
83.4
0.66
2.86
83.8
Operation not recommended
52.8
0.68
3.11
87.9
52.6
0.67
3.09
88.5
55.5
0.69
3.51
92.7
55.7
0.69
3.41
92.8
56.0
0.68
3.38
93.5
53.7
0.69
3.81
90.3
53.9
0.69
3.70
90.3
54.6
0.69
3.65
91.1
54.5
0.71
4.19
91.1
54.6
0.71
4.08
91.0
55.8
0.71
4.01
91.9
52.2
0.71
4.61
89.1
52.2
0.71
4.49
88.9
53.8
0.72
4.40
89.8
48.5
0.72
5.06
84.3
48.4
0.72
4.93
84.0
50.3
0.73
4.81
85.0
49.7
49.1
Operation not recommended
0.74
5.47
83.7
0.75
5.33
84.6
Operation not recommended
42.5
0.74
6.03
77.9
45.0
0.77
5.85
78.8
Operation not recommended
43.1
0.79
6.69
77.1
46.0
0.83
6.47
77.8
47.8
50.2
WaterFurnace works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice. Please contact WaterFurnace at 1-800-478-5667 for latest design and
specifications. Purchaser’s approval of this data set signifies that the equipment is acceptable under the provisions of the job specification. Statements and other information contained herein are not express warranties and do not form the
basis of any bargain between the parties, but are merely WaterFurnace’s opinion or commendation of its products. The latest version of this document is available at www.waterfurnace.com.
SD1585
10/08
24
Page _____ of _____
Contractor:
Engineer:
ENVISION Residential Series
2-6 Tons 60Hz
P.O.:
Project Name:
NS022
Unit Tag:
single speed
NS022 - Single Speed - ECM
700 Rated CFM Heating
700 Rated CFM Cooling
Performance capacities shown in thousands of Btuh.
Capacity Data (700 CFM)
HEATING - EAT 70°F
Flow
Water
EWT
Rate
Pressure Drop
ºF
GPM
PSI
FT/HD
3.0
0.9
2.2
4.5
1.8
4.2
6.0
2.9
6.8
COOLING - EAT 80/67 °F
Airflow
HC
Power
HE
LAT
CFM
kBtuh
kW
kBtuh
ºF
COP
HWC
Airflow
TC
SC
S/T
Power
HR
kBtuh
CFM
kBtuh
kBtuh
Ratio
kW
kBtuh
HWC
EER
kBtuh
Operation not recommended
20
30
3.0
0.9
2.1
4.5
1.7
4.0
6.0
40
0.9
2.0
4.5
1.7
3.9
2.0
4.5
1.6
3.8
4.5
6.0
3.0
4.5
6.0
3.0
80
4.5
6.0
3.0
90
4.5
6.0
100
0.8
1.6
2.6
0.8
1.5
2.5
0.8
1.5
2.4
0.7
1.4
2.3
6.2
1.9
3.7
6.0
1.8
3.6
5.8
1.8
3.4
5.6
1.7
3.3
5.4
0.7
1.7
4.5
1.4
3.2
2.2
0.7
1.6
4.5
1.3
3.1
2.2
0.7
1.5
4.5
1.3
2.9
2.1
12.3
1.18
8.3
89.0
3.06
1.6
700
12.5
1.19
8.4
86.5
3.08
1.5
Operation not recommended
Operation not recommended
600
14.5
1.19
10.4
92.3
3.56
1.7
600
23.4
15.8
0.68
0.66
25.7
35.6
---
700
14.8
1.20
10.7
89.5
3.61
1.6
700
23.8
17.3
0.73
0.69
26.2
34.4
---
600
14.8
1.20
10.7
92.8
3.61
1.8
600
23.6
15.8
0.67
0.64
25.7
36.9
---
700
15.0
1.21
10.8
89.8
3.62
1.6
700
24.1
17.3
0.72
0.67
26.4
36.0
---
600
17.0
1.22
12.9
96.3
4.10
1.9
600
24.2
15.8
0.65
0.72
26.7
33.6
---
700
17.4
1.22
13.2
93.0
4.17
1.8
700
24.6
17.3
0.70
0.75
27.2
32.7
---
600
17.3
1.23
13.1
96.8
4.12
2.0
600
24.4
15.8
0.65
0.70
26.8
34.9
---
700
17.7
1.23
13.5
93.4
4.20
1.8
700
24.9
17.3
0.69
0.73
27.4
34.2
---
600
18.5
1.22
14.3
98.6
4.43
2.1
600
24.6
15.6
0.63
0.84
27.5
29.2
1.1
700
18.9
1.22
14.7
95.0
4.52
2.0
700
25.2
17.0
0.67
0.88
28.2
28.7
1.2
600
19.5
1.25
15.2
100.0
4.56
2.2
600
24.9
15.7
0.63
0.80
27.6
31.1
1.0
700
19.8
1.25
15.6
96.2
4.64
2.0
700
25.4
17.1
0.67
0.84
28.3
30.4
1.1
600
19.7
1.27
15.4
100.5
4.56
2.2
600
25.2
15.7
0.63
0.78
27.8
32.4
1.0
700
20.2
1.26
15.9
96.7
4.70
2.1
700
25.7
17.1
0.67
0.81
28.4
31.7
1.1
600
20.9
1.27
16.6
102.3
4.82
2.4
600
23.9
15.4
0.65
0.94
27.1
25.3
1.3
700
21.4
1.26
17.1
98.3
4.98
2.2
700
24.3
16.8
0.69
0.98
27.7
24.8
1.4
600
21.9
1.30
17.5
103.8
4.94
2.4
600
24.1
15.6
0.65
0.89
27.1
26.9
1.2
700
22.4
1.29
18.0
99.7
5.10
2.3
700
24.6
17.0
0.69
0.93
27.8
26.4
1.3
600
22.2
1.31
17.8
104.3
4.96
2.5
600
24.3
15.6
0.64
0.87
27.3
28.0
1.1
700
22.8
1.30
18.4
100.2
5.15
2.3
700
24.8
17.0
0.68
0.90
27.9
27.5
1.3
600
23.3
1.32
18.8
106.0
5.17
2.7
600
23.6
15.3
0.65
1.07
27.2
22.0
1.6
700
23.9
1.30
19.4
101.6
5.40
2.5
700
24.0
16.6
0.69
1.11
27.8
21.6
1.7
600
24.3
1.35
19.7
107.6
5.29
2.7
600
23.7
15.4
0.65
1.01
27.2
23.5
1.5
700
25.1
1.33
20.5
103.2
5.52
2.5
700
24.3
16.8
0.69
1.05
27.9
23.1
1.7
600
24.8
1.37
20.1
108.3
5.32
2.8
600
24.0
15.4
0.64
0.99
27.4
24.4
1.4
700
25.5
1.34
20.9
103.7
5.57
2.6
700
24.5
16.8
0.69
1.02
28.0
24.0
1.6
600
25.4
1.38
20.7
109.1
5.40
3.0
600
22.5
15.0
0.66
1.21
26.7
18.6
2.0
700
26.1
1.34
21.5
104.5
5.70
2.8
700
23.0
16.2
0.71
1.26
27.3
18.3
2.2
600
26.5
1.41
21.7
110.8
5.51
3.1
600
22.7
15.1
0.66
1.15
26.7
19.8
1.9
700
27.3
1.37
22.7
106.2
5.84
2.8
700
23.3
16.4
0.71
1.19
27.3
19.6
2.1
600
26.9
1.42
22.1
111.6
5.54
3.2
600
23.0
15.1
0.66
1.11
26.8
20.7
1.8
700
27.8
1.39
23.1
106.8
5.88
2.9
700
23.4
16.4
0.70
1.15
27.4
20.3
2.0
600
27.5
1.44
22.5
112.4
5.59
3.3
600
20.9
14.6
0.70
1.38
25.6
15.2
2.5
700
28.4
1.40
23.6
107.5
5.96
3.1
700
21.4
15.8
0.74
1.42
26.2
15.0
2.7
600
28.6
1.47
23.6
114.2
5.70
3.4
600
21.1
14.8
0.70
1.31
25.5
16.1
2.4
700
29.7
1.42
24.8
109.2
6.11
3.2
700
21.5
16.0
0.74
1.34
26.1
16.1
2.6
600
29.1
1.49
24.0
114.9
5.72
3.5
600
21.4
14.8
0.69
1.26
25.7
16.9
2.2
700
30.2
1.44
25.3
109.9
6.15
3.3
700
21.7
16.0
0.74
1.31
26.2
16.7
2.4
Operation not recommended
Operation not recommended
Operation not recommended
600
20.2
14.4
0.71
1.48
25.2
13.6
2.9
700
20.6
15.6
0.76
1.52
25.8
13.5
3.2
600
20.4
14.4
0.70
1.43
25.3
14.2
2.7
700
20.8
15.6
0.75
1.48
25.9
14.1
3.0
Operation not recommended
Operation not recommended
5.0
3.0
6.0
600
5.2
3.0
6.0
120
2.7
3.0
6.0
110
6.4
0.9
3.0
70
2.8
3.0
6.0
60
6.6
3.0
6.0
50
2.8
Operation not recommended
600
18.1
13.8
0.76
1.67
23.8
10.9
3.6
700
18.5
15.0
0.81
1.72
24.3
10.8
3.9
600
18.3
13.8
0.76
1.62
23.8
11.3
3.3
700
18.7
15.0
0.81
1.67
24.3
11.2
3.7
Operation not recommended
4.8
600
16.8
13.4
0.79
1.89
23.3
8.9
4.3
700
17.1
14.5
0.85
1.94
23.8
8.8
4.7
600
17.0
13.4
0.79
1.83
23.2
9.3
4.0
700
17.3
14.5
0.84
1.89
23.8
9.2
4.4
WaterFurnace works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice. Please contact WaterFurnace at 1-800-478-5667 for latest design and
specifications. Purchaser’s approval of this data set signifies that the equipment is acceptable under the provisions of the job specification. Statements and other information contained herein are not express warranties and do not form the
basis of any bargain between the parties, but are merely WaterFurnace’s opinion or commendation of its products. The latest version of this document is available at www.waterfurnace.com.
SD1585
10/08
25
Page _____ of _____
Contractor:
Engineer:
ENVISION Residential Series
2-6 Tons 60Hz
P.O.:
Project Name:
Unit Tag:
NS030
NS030 - Single Speed - ECM
single speed
Capacity
Data
(900 CFM)
900 Rated CFM
Cooling
900 Rated CFM Cooling
Performance capacities shown in thousands of Btuh.
HEATING - EAT 70°F
Flow
Water
EWT
Rate
Pressure Drop
ºF
GPM
PSI
FT/HD
20
6.0
3.1
7.2
8.0
5.2
12.1
COOLING - EAT 80/67 °F
Airflow
HC
Power
HE
LAT
CFM
kBtuh
kW
kBtuh
ºF
COP
HWC
Airflow
TC
SC
S/T
Power
HR
kBtuh
CFM
kBtuh
kBtuh
Ratio
kW
kBtuh
HWC
EER
kBtuh
Operation not recommended
30
4.0
1.5
3.4
6.0
3.0
7.0
8.0
40
1.4
3.3
6.0
2.9
6.8
3.2
6.0
2.8
6.6
6.0
8.0
4.0
6.0
8.0
4.0
80
6.0
8.0
4.0
90
6.0
8.0
100
1.4
2.8
4.6
1.3
2.7
4.5
1.3
2.6
4.3
1.2
2.5
4.2
11.1
3.1
6.4
10.7
3.0
6.2
10.4
2.9
5.9
10.0
2.8
5.7
9.6
1.2
2.7
6.0
2.4
5.5
4.0
1.1
2.6
6.0
2.3
5.3
3.9
1.1
2.5
6.0
2.2
5.1
3.7
16.9
1.52
11.7
92.4
3.26
2.2
900
17.2
1.55
11.9
87.7
3.25
2.0
Operation not recommended
Operation not recommended
700
19.4
1.51
14.2
95.7
3.77
2.4
700
26.1
16.7
0.64
0.87
29.1
30.0
---
900
19.8
1.54
14.6
90.4
3.77
2.2
900
26.8
18.7
0.70
0.94
30.0
28.5
---
700
19.9
1.53
14.7
96.3
3.82
2.4
700
26.3
16.7
0.63
0.85
29.2
30.8
---
900
20.2
1.56
14.9
90.8
3.81
2.2
900
27.3
18.7
0.68
0.91
30.4
30.0
---
Operation not recommended
Operation not recommended
700
22.7
1.56
17.4
100.1
4.27
2.6
700
28.3
18.0
0.64
0.95
31.5
29.7
---
900
23.3
1.58
17.9
93.9
4.31
2.4
900
29.1
20.2
0.70
1.02
32.6
28.4
---
700
23.3
1.58
17.9
100.8
4.32
2.7
700
28.5
18.0
0.63
0.93
31.7
30.5
---
900
23.8
1.60
18.3
94.5
4.36
2.5
900
29.5
20.2
0.68
0.99
32.9
29.7
---
700
24.9
1.60
19.4
102.9
4.55
2.8
700
30.2
19.3
0.64
1.10
34.0
27.5
1.4
900
25.5
1.62
20.0
96.2
4.61
2.6
900
31.1
21.7
0.70
1.17
35.1
26.6
1.5
700
25.7
1.61
20.2
104.0
4.68
2.9
700
30.3
19.5
0.64
1.06
33.9
28.6
1.3
900
26.4
1.63
20.8
97.1
4.75
2.7
900
31.2
21.8
0.70
1.13
35.0
27.7
1.4
700
26.3
1.63
20.7
104.8
4.72
3.0
700
30.6
19.5
0.64
1.04
34.1
29.5
1.2
900
26.9
1.64
21.3
97.7
4.81
2.8
900
31.6
21.8
0.69
1.10
35.3
28.7
1.4
700
27.9
1.67
22.2
107.0
4.90
3.2
700
29.5
18.9
0.64
1.21
33.6
24.4
1.7
900
28.7
1.67
23.0
99.5
5.02
3.0
900
30.4
21.3
0.70
1.28
34.7
23.7
1.8
700
28.9
1.69
23.1
108.2
5.01
3.3
700
29.6
19.1
0.65
1.16
33.5
25.4
1.6
900
29.7
1.69
23.9
100.6
5.16
3.0
900
30.5
21.3
0.70
1.23
34.7
24.7
1.7
700
29.5
1.71
23.6
109.0
5.05
3.4
700
29.9
19.1
0.64
1.14
33.8
26.2
1.5
900
30.3
1.70
24.5
101.1
5.21
3.1
900
30.8
21.4
0.69
1.20
34.9
25.6
1.6
700
31.1
1.76
25.1
111.1
5.19
3.6
700
29.7
19.2
0.65
1.35
34.3
22.0
2.1
900
32.0
1.75
26.0
102.9
5.36
3.3
900
30.6
21.6
0.71
1.42
35.4
21.5
2.2
700
32.1
1.78
26.0
112.5
5.28
3.7
700
29.7
19.3
0.65
1.30
34.2
22.9
2.0
900
33.1
1.76
27.1
104.1
5.50
3.4
900
30.6
21.6
0.70
1.37
35.3
22.4
2.1
700
32.7
1.81
26.5
113.2
5.31
3.8
700
30.1
19.3
0.64
1.27
34.4
23.6
1.8
900
33.7
1.78
27.6
104.6
5.53
3.5
900
31.0
21.7
0.70
1.34
35.5
23.1
2.0
700
33.6
1.84
27.3
114.4
5.36
4.0
700
28.4
19.0
0.67
1.51
33.6
18.9
2.6
900
34.7
1.81
28.5
105.7
5.61
3.7
900
29.3
21.3
0.73
1.58
34.7
18.5
2.8
700
34.8
1.87
28.4
116.0
5.46
4.1
700
28.6
19.1
0.67
1.45
33.5
19.7
2.5
900
36.0
1.83
29.7
107.0
5.75
3.8
900
29.4
21.3
0.72
1.52
34.6
19.4
2.7
700
35.3
1.89
28.9
116.7
5.47
4.3
700
28.8
19.1
0.66
1.42
33.7
20.3
2.3
900
36.5
1.85
30.2
107.6
5.77
3.9
900
29.7
21.4
0.72
1.49
34.8
19.9
2.5
700
36.2
1.94
29.6
117.8
5.47
4.5
700
26.3
18.0
0.68
1.68
32.0
15.6
3.3
900
37.4
1.89
31.0
108.5
5.80
4.2
900
27.1
20.1
0.74
1.75
33.1
15.5
3.5
700
37.5
1.97
30.8
119.6
5.59
4.6
700
26.5
18.0
0.68
1.62
32.0
16.4
3.1
900
38.9
1.92
32.3
110.0
5.93
4.3
900
27.3
20.1
0.74
1.68
33.0
16.2
3.3
700
38.0
2.00
31.2
120.3
5.58
4.8
700
26.7
18.1
0.68
1.58
32.1
16.9
2.8
900
39.5
1.94
32.8
110.6
5.95
4.4
900
27.6
20.2
0.73
1.65
33.2
16.7
3.2
Operation not recommended
700
25.3
18.0
0.71
1.83
31.5
13.8
3.8
900
26.0
20.1
0.77
1.89
32.5
13.8
4.1
700
25.5
18.1
0.71
1.79
31.6
14.3
3.5
900
26.3
20.2
0.77
1.85
32.6
14.2
3.9
700
21.5
16.9
0.79
2.04
28.5
10.6
4.6
900
22.2
18.8
0.85
2.10
29.3
10.6
5.0
700
21.7
17.0
0.78
1.99
28.5
10.9
4.3
900
22.4
18.9
0.84
2.05
29.4
10.9
4.7
Operation not recommended
Operation not recommended
8.9
4.0
8.0
700
9.3
4.0
8.0
120
4.8
4.0
8.0
110
11.4
1.4
4.0
70
4.9
4.0
8.0
60
11.8
4.0
8.0
50
5.1
Operation not recommended
Operation not recommended
8.6
700
20.8
16.3
0.78
2.30
28.7
9.1
5.5
900
21.4
18.1
0.85
2.35
29.5
9.1
6.0
700
20.9
16.4
0.78
2.25
28.6
9.3
5.1
900
21.7
18.2
0.84
2.30
29.5
9.4
5.7
WaterFurnace works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice. Please contact WaterFurnace at 1-800-478-5667 for latest design and
specifications. Purchaser’s approval of this data set signifies that the equipment is acceptable under the provisions of the job specification. Statements and other information contained herein are not express warranties and do not form the
basis of any bargain between the parties, but are merely WaterFurnace’s opinion or commendation of its products. The latest version of this document is available at www.waterfurnace.com.
SD1585
10/08
26
Page _____ of _____
Contractor:
Engineer:
ENVISION Residential Series
2-6 Tons 60Hz
P.O.:
Project Name:
Unit Tag:
NS036
NS036 - Single Speed - ECM
single speed
Capacity
Data
(1250 CFM)
1250 Rated CFM
Cooling
1250 Rated CFM Cooling
Performance capacities shown in thousands of Btuh.
HEATING - EAT 70°F
Flow
Water
EWT
Rate
Pressure Drop
ºF
GPM
PSI
FT/HD
20
7.0
2.1
4.9
9.0
3.6
8.2
COOLING - EAT 80/67 °F
Airflow
HC
Power
HE
LAT
CFM
kBtuh
kW
kBtuh
ºF
COP
HWC
Airflow
TC
SC
S/T
Power
HR
kBtuh
CFM
kBtuh
kBtuh
Ratio
kW
kBtuh
HWC
EER
kBtuh
Operation not recommended
5.0
30
7.0
9.0
40
7.0
2.0
4.6
2.2
7.0
1.9
4.5
7.0
7.0
9.0
5.0
7.0
9.0
5.0
7.0
9.0
100
0.9
1.9
3.1
0.9
1.8
3.0
0.9
1.7
2.9
0.8
1.7
2.8
7.5
2.1
4.3
7.3
2.1
4.2
7.0
2.0
4.0
6.8
1.9
3.9
6.6
0.8
1.8
7.0
1.6
3.8
2.7
0.8
1.8
7.0
1.6
3.6
2.6
0.7
1.7
7.0
1.5
3.5
2.5
1.83
14.8
88.5
3.36
2.7
21.4
1.87
15.0
85.8
3.35
2.4
Operation not recommended
Operation not recommended
1050
23.6
1.84
17.3
90.8
3.76
2.9
1050
29.9
19.3
0.65
1.06
33.5
28.1
---
1250
24.1
1.88
17.7
87.8
3.76
2.6
1250
30.7
21.6
0.70
1.15
34.7
26.7
---
1050
24.2
1.86
17.9
91.3
3.82
3.0
1050
30.1
19.2
0.64
1.05
33.7
28.8
---
1250
24.6
1.89
18.1
88.2
3.81
2.7
1250
31.2
21.5
0.69
1.11
35.0
28.1
---
Operation not recommended
Operation not recommended
1050
27.4
1.89
20.9
94.2
4.24
3.2
1050
32.7
21.5
0.66
1.17
36.7
28.1
---
1250
28.0
1.92
21.5
90.8
4.28
3.0
1250
33.7
24.1
0.71
1.25
38.0
26.9
---
1050
28.0
1.92
21.5
94.7
4.29
3.3
1050
33.0
21.4
0.65
1.14
36.9
28.9
---
1250
28.6
1.94
22.0
91.2
4.33
3.0
1250
34.2
24.0
0.70
1.21
38.3
28.1
---
1050
29.8
1.94
23.2
96.3
4.52
3.5
1050
35.3
23.2
0.66
1.34
39.9
26.3
1.7
1250
30.5
1.95
23.8
92.6
4.58
3.2
1250
36.3
26.1
0.72
1.43
41.2
25.5
1.8
1050
30.8
1.94
24.2
97.1
4.64
3.6
1050
35.4
23.4
0.66
1.29
39.8
27.4
1.6
1250
31.6
1.96
24.9
93.4
4.72
3.3
1250
36.4
26.2
0.72
1.38
41.1
26.5
1.7
1050
31.5
1.97
24.7
97.7
4.68
3.7
1050
35.7
23.4
0.65
1.27
40.0
28.2
1.4
1250
32.2
1.98
25.5
93.9
4.78
3.4
1250
36.9
26.2
0.71
1.34
41.5
27.5
1.6
1050
33.4
1.99
26.6
99.4
4.92
3.9
1050
35.0
23.7
0.68
1.46
40.0
23.9
2.0
1250
34.3
1.99
27.5
95.4
5.04
3.6
1250
36.1
26.7
0.74
1.55
41.4
23.2
2.1
1050
34.5
2.01
27.6
100.4
5.03
4.0
1050
35.1
23.9
0.68
1.41
39.9
24.9
1.9
1250
35.5
2.01
28.6
96.3
5.18
3.7
1250
36.2
26.7
0.74
1.49
41.2
24.2
2.0
1050
35.2
2.04
28.2
101.0
5.06
4.2
1050
35.5
23.9
0.67
1.38
40.2
25.7
1.7
1250
36.2
2.03
29.2
96.8
5.23
3.8
1250
36.6
26.8
0.73
1.46
41.6
25.0
1.9
1050
37.1
2.05
30.1
102.8
5.31
4.4
1050
35.5
24.7
0.69
1.62
41.0
21.9
2.5
1250
38.2
2.04
31.3
98.3
5.48
4.1
1250
36.6
27.7
0.76
1.71
42.4
21.3
2.6
1050
38.4
2.09
31.3
103.9
5.40
4.5
1050
35.6
24.8
0.70
1.57
40.9
22.7
2.3
1250
39.6
2.06
32.6
99.3
5.63
4.2
1250
36.7
27.7
0.76
1.65
42.3
22.3
2.5
1050
39.1
2.11
31.9
104.5
5.43
4.7
1050
36.0
24.8
0.69
1.53
41.2
23.5
2.2
1250
40.3
2.09
33.2
99.8
5.66
4.3
1250
37.1
27.8
0.75
1.62
42.6
23.0
2.4
1050
40.1
2.11
32.9
105.4
5.57
4.9
1050
34.6
24.6
0.71
1.80
40.8
19.2
3.1
1250
41.4
2.08
34.3
100.7
5.83
4.6
1250
35.7
27.5
0.77
1.89
42.1
18.9
3.3
1050
41.6
2.15
34.3
106.7
5.68
5.1
1050
34.8
24.6
0.71
1.73
40.7
20.0
2.9
1250
43.0
2.11
35.8
101.8
5.97
4.7
1250
35.8
27.5
0.77
1.81
42.0
19.8
3.1
1050
42.2
2.18
34.8
107.2
5.69
5.2
1050
35.1
24.7
0.70
1.70
40.9
20.7
2.7
1250
43.7
2.13
36.4
102.3
6.00
4.8
1250
36.2
27.6
0.76
1.78
42.3
20.3
3.0
1050
43.3
2.18
35.9
108.2
5.82
5.5
1050
32.5
23.9
0.74
1.99
39.2
16.3
3.9
1250
44.9
2.13
37.6
103.2
6.16
5.1
1250
33.5
26.7
0.80
2.07
40.6
16.1
4.1
1050
45.0
2.22
37.4
109.6
5.95
5.7
1050
32.7
23.9
0.73
1.92
39.2
17.0
3.6
1250
46.6
2.17
39.2
104.5
6.31
5.3
1250
33.7
26.7
0.79
1.99
40.5
16.9
3.9
1050
45.5
2.25
37.9
110.2
5.93
5.9
1050
33.0
24.0
0.73
1.87
39.4
17.6
3.4
1250
47.3
2.19
39.8
105.0
6.32
5.4
1250
34.0
26.8
0.79
1.96
40.7
17.4
3.7
Operation not recommended
1050
31.8
23.8
0.75
2.15
39.1
14.8
4.5
1250
32.7
26.5
0.81
2.22
40.3
14.8
4.8
1050
32.0
23.9
0.75
2.10
39.2
15.3
4.1
1250
33.1
26.6
0.81
2.18
40.5
15.2
4.6
1050
28.6
22.1
0.77
2.38
36.7
12.0
5.4
1250
29.5
24.6
0.84
2.45
37.8
12.0
5.9
1050
28.8
22.2
0.77
2.32
36.8
12.4
5.0
1250
29.8
24.7
0.83
2.39
38.0
12.4
5.6
Operation not recommended
Operation not recommended
6.1
5.0
9.0
21.0
1250
6.3
5.0
9.0
120
3.3
5.0
9.0
110
7.8
1.0
5.0
90
3.4
5.0
9.0
80
8.0
2.3
5.0
70
3.5
4.7
1.0
9.0
60
2.1
1050
2.3
5.0
9.0
50
1.0
Operation not recommended
Operation not recommended
5.8
1050
26.9
21.8
0.81
2.66
35.9
10.1
6.5
1250
27.6
24.2
0.88
2.72
36.9
10.1
7.1
1050
27.0
22.0
0.81
2.60
35.9
10.4
6.1
1250
28.0
24.3
0.87
2.66
37.0
10.5
6.7
WaterFurnace works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice. Please contact WaterFurnace at 1-800-478-5667 for latest design and
specifications. Purchaser’s approval of this data set signifies that the equipment is acceptable under the provisions of the job specification. Statements and other information contained herein are not express warranties and do not form the
basis of any bargain between the parties, but are merely WaterFurnace’s opinion or commendation of its products. The latest version of this document is available at www.waterfurnace.com.
SD1585
10/08
27
Page _____ of _____
Contractor:
Engineer:
ENVISION Residential Series
2-6 Tons 60Hz
P.O.:
Project Name:
Unit Tag:
NS042
NS042 - Single Speed - ECM
single speed
Capacity
Data
(1350 CFM)
1350 Rated CFM
Heating
1350 Rated CFM Cooling
Performance capacities shown in thousands of Btuh.
HEATING - EAT 70°F
Flow
Water
EWT
Rate
Pressure Drop
ºF
GPM
PSI
FT/HD
20
8.0
2.3
5.3
11.0
4.4
10.3
COOLING - EAT 80/67 °F
Airflow
HC
Power
HE
LAT
CFM
kBtuh
kW
kBtuh
ºF
COP
HWC
Airflow
TC
SC
S/T
Power
HR
kBtuh
CFM
kBtuh
kBtuh
Ratio
kW
kBtuh
HWC
EER
kBtuh
Operation not recommended
5.0
30
8.0
11.0
40
8.0
2.1
4.9
1.7
8.0
2.1
4.8
8.0
8.0
11.0
5.0
8.0
11.0
5.0
8.0
11.0
100
0.7
2.0
3.9
0.7
1.9
3.8
0.7
1.9
3.7
0.7
1.8
3.5
9.4
1.7
4.6
9.1
1.6
4.5
8.8
1.6
4.3
8.5
1.5
4.2
8.2
0.6
1.5
8.0
1.7
4.0
3.4
0.6
1.4
8.0
1.7
3.9
3.3
0.6
1.3
8.0
1.6
3.7
3.2
2.12
16.8
89.3
3.32
4.1
24.3
2.10
17.1
86.7
3.39
3.7
Operation not recommended
Operation not recommended
1150
27.9
2.16
20.6
92.5
3.80
4.3
1150
40.2
25.0
0.62
1.37
44.9
29.3
---
1350
28.3
2.14
21.0
89.4
3.87
3.9
1350
42.1
28.1
0.67
1.45
47.0
29.0
---
1150
28.3
2.16
21.0
92.8
3.85
4.4
1150
40.6
25.0
0.62
1.33
45.1
30.5
---
1350
28.7
2.14
21.4
89.7
3.93
4.0
1350
42.5
28.1
0.66
1.41
47.3
30.2
---
Operation not recommended
Operation not recommended
1150
31.8
2.24
24.1
95.6
4.15
4.7
1150
41.9
26.7
0.64
1.46
46.9
28.7
---
1350
32.3
2.21
24.7
92.1
4.28
4.3
1350
43.8
30.0
0.68
1.54
49.0
28.4
---
1150
32.4
2.25
24.7
96.1
4.21
4.9
1150
42.3
26.7
0.63
1.42
47.2
29.9
---
1350
32.9
2.21
25.3
92.5
4.35
4.4
1350
44.2
30.0
0.68
1.49
49.3
29.6
---
1150
34.2
2.26
26.5
97.5
4.44
5.1
1150
42.6
27.5
0.65
1.65
48.3
25.8
2.5
1350
34.8
2.21
27.2
93.8
4.61
4.7
1350
44.4
30.9
0.70
1.74
50.3
25.5
2.6
1150
35.6
2.31
27.7
98.7
4.52
5.3
1150
43.1
27.8
0.65
1.58
48.4
27.3
2.3
1350
36.2
2.26
28.5
94.8
4.71
4.8
1350
44.8
31.3
0.70
1.66
50.5
27.0
2.5
1150
36.3
2.32
28.4
99.3
4.58
5.4
1150
43.5
27.8
0.64
1.53
48.7
28.4
2.1
1350
37.0
2.27
29.3
95.4
4.78
5.0
1350
45.3
31.3
0.69
1.61
50.8
28.1
2.4
1150
37.5
2.32
29.6
100.2
4.73
5.7
1150
42.5
28.2
0.66
1.82
48.7
23.4
3.0
1350
38.3
2.26
30.5
96.2
4.96
5.3
1350
44.1
31.7
0.72
1.91
50.6
23.1
3.2
1150
39.2
2.39
31.0
101.6
4.80
5.9
1150
43.0
28.5
0.66
1.73
48.9
24.9
2.8
1350
40.0
2.32
32.1
97.4
5.06
5.4
1350
44.7
32.0
0.72
1.81
50.9
24.6
3.0
1150
40.1
2.41
31.9
102.3
4.87
6.1
1150
43.4
28.5
0.66
1.68
49.2
25.9
2.6
1350
41.0
2.34
33.0
98.1
5.14
5.6
1350
45.1
32.0
0.71
1.76
51.1
25.6
2.9
1150
40.7
2.40
32.5
102.8
4.97
6.4
1150
42.6
29.1
0.68
2.01
49.5
21.2
3.8
1350
41.6
2.32
33.7
98.6
5.26
6.0
1350
44.2
32.7
0.74
2.10
51.4
21.0
4.0
1150
42.7
2.48
34.2
104.4
5.04
6.6
1150
43.3
29.4
0.68
1.91
49.8
22.7
3.5
1350
43.7
2.39
35.5
100.0
5.36
6.1
1350
44.9
33.1
0.74
2.00
51.7
22.5
3.8
1150
43.8
2.51
35.2
105.2
5.11
6.8
1150
43.7
29.4
0.67
1.85
50.0
23.6
3.3
1350
44.9
2.42
36.6
100.8
5.45
6.3
1350
45.3
33.1
0.73
1.94
51.9
23.4
3.6
1150
43.7
2.44
35.4
105.2
5.26
7.2
1150
41.0
28.5
0.69
2.24
48.7
18.4
4.8
1350
44.9
2.34
36.9
100.8
5.63
6.7
1350
42.4
32.0
0.75
2.33
50.4
18.2
5.1
1150
46.0
2.54
37.4
107.0
5.32
7.5
1150
41.8
28.8
0.69
2.12
49.0
19.7
4.5
1350
47.3
2.42
39.0
102.4
5.72
6.9
1350
43.2
32.3
0.75
2.21
50.7
19.5
4.8
1150
47.3
2.57
38.6
108.1
5.39
7.7
1150
42.2
28.8
0.68
2.06
49.2
20.5
4.1
1350
48.7
2.46
40.3
103.4
5.82
7.1
1350
43.6
32.3
0.74
2.15
50.9
20.3
4.6
1150
46.7
2.48
38.2
107.6
5.51
8.1
1150
38.9
27.6
0.71
2.50
47.4
15.6
6.0
1350
48.0
2.37
40.0
102.9
5.95
7.5
1350
40.1
31.1
0.78
2.60
48.9
15.4
6.4
1150
49.2
2.60
40.4
109.6
5.55
8.4
1150
39.7
27.9
0.70
2.36
47.7
16.8
5.6
1350
50.8
2.47
42.4
104.8
6.03
7.8
1350
40.9
31.4
0.77
2.46
49.3
16.6
6.1
1150
50.8
2.64
41.8
110.9
5.63
8.6
1150
40.1
27.9
0.70
2.29
47.9
17.5
5.2
1350
52.4
2.51
43.9
106.0
6.14
8.0
1350
41.3
31.4
0.76
2.39
49.4
17.3
5.8
Operation not recommended
1150
38.2
27.4
0.72
2.63
47.1
14.5
6.9
1350
39.2
30.8
0.78
2.73
48.6
14.4
7.5
1150
38.5
27.4
0.71
2.55
47.3
15.1
6.4
1350
39.6
30.8
0.78
2.65
48.7
15.0
7.2
Operation not recommended
Operation not recommended
7.6
5.0
11.0
24.0
7.9
5.0
11.0
120
4.1
5.0
11.0
110
9.7
0.7
5.0
90
4.2
5.0
11.0
80
10.0
1.8
5.0
70
4.3
5.1
0.8
11.0
60
2.2
1150
1350
1.8
5.0
11.0
50
0.8
Operation not recommended
1150
34.8
25.3
0.73
2.93
44.8
11.9
8.5
1350
35.7
28.5
0.80
3.04
46.1
11.7
9.2
1150
35.1
25.3
0.72
2.85
44.9
12.3
7.9
1350
36.0
28.5
0.79
2.95
46.1
12.2
8.8
Operation not recommended
7.3
1150
32.8
25.0
0.76
3.26
43.9
10.1
10.3
1350
33.5
28.1
0.84
3.37
45.1
9.9
11.1
1150
33.1
25.0
0.76
3.17
43.9
10.5
9.5
1350
33.9
28.1
0.83
3.27
45.1
10.4
10.6
WaterFurnace works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice. Please contact WaterFurnace at 1-800-478-5667 for latest design and
specifications. Purchaser’s approval of this data set signifies that the equipment is acceptable under the provisions of the job specification. Statements and other information contained herein are not express warranties and do not form the
basis of any bargain between the parties, but are merely WaterFurnace’s opinion or commendation of its products. The latest version of this document is available at www.waterfurnace.com.
SD1585
10/08
28
Page _____ of _____
Contractor:
Engineer:
ENVISION Residential Series
2-6 Tons 60Hz
P.O.:
Project Name:
Unit Tag:
NS048
NS048 - Single Speed - ECM
single speed
Capacity
(1500 CFM)
1500 Rated Data
CFM Heating
1500 Rated CFM Cooling
Performance capacities shown in thousands of Btuh.
HEATING - EAT 70°F
Flow
Water
EWT
Rate
Pressure Drop
ºF
GPM
PSI
FT/HD
20
9.0
2.3
5.4
12.0
4.0
9.2
COOLING - EAT 80/67 °F
Airflow
HC
Power
HE
LAT
CFM
kBtuh
kW
kBtuh
ºF
COP
HWC
Airflow
TC
SC
S/T
Power
HR
kBtuh
CFM
kBtuh
kBtuh
Ratio
kW
kBtuh
HWC
EER
kBtuh
Operation not recommended
30
6.0
1.1
2.5
9.0
2.3
5.3
12.0
40
1.1
2.5
9.0
2.2
5.1
2.4
9.0
2.1
4.9
9.0
2.1
6.0
9.0
2.0
6.0
9.0
1.9
6.0
9.0
1.9
3.2
8.4
2.3
4.8
8.2
2.2
4.6
7.9
2.1
4.5
7.6
2.1
4.3
7.4
6.0
0.9
2.0
9.0
1.8
4.2
12.0
3.1
0.8
1.9
9.0
1.7
4.0
6.0
3.0
0.8
9.0
1.7
12.0
2.8
1300
31.6
2.84
21.9
92.5
3.26
5.3
1500
32.0
2.82
22.4
89.7
3.33
4.8
Operation not recommended
Operation not recommended
1300
36.3
2.92
26.3
95.8
3.64
5.6
1300
48.2
30.2
0.63
1.61
53.7
29.9
---
1500
36.7
2.90
26.8
92.6
3.71
5.2
1500
50.5
33.9
0.67
1.70
56.3
29.6
---
1300
36.8
2.93
26.8
96.2
3.68
5.8
1300
48.7
30.2
0.62
1.56
54.0
31.2
---
1500
37.2
2.90
27.3
93.0
3.76
5.3
1500
51.0
33.9
0.66
1.66
56.6
30.8
---
Operation not recommended
Operation not recommended
1300
41.7
3.05
31.3
99.7
4.00
6.2
1300
50.1
31.9
0.64
1.77
56.1
28.3
---
1500
42.2
3.00
32.0
96.1
4.13
5.7
1500
52.3
35.8
0.68
1.87
58.7
28.0
---
1300
42.4
3.06
31.9
100.2
4.06
6.4
1300
50.6
31.9
0.63
1.72
56.5
29.5
---
1500
43.0
3.01
32.7
96.5
4.19
5.8
1500
52.9
35.8
0.68
1.81
59.0
29.2
---
1300
44.7
3.09
34.1
101.8
4.24
6.7
1300
51.2
33.1
0.65
2.06
58.2
24.9
2.9
1500
45.4
3.02
35.1
98.0
4.40
6.2
1500
53.3
37.2
0.70
2.17
60.7
24.6
3.1
1300
46.5
3.16
35.7
103.1
4.32
6.9
1300
51.7
33.4
0.65
1.96
58.4
26.3
2.7
1500
47.3
3.08
36.7
99.2
4.49
6.4
1500
53.9
37.6
0.70
2.07
60.9
26.1
2.9
1300
47.4
3.18
36.6
103.8
4.37
7.2
1300
52.2
33.4
0.64
1.91
58.7
27.4
2.5
1500
48.2
3.10
37.7
99.8
4.56
6.5
1500
54.4
37.6
0.69
2.01
61.3
27.1
2.8
1300
49.1
3.18
38.2
105.0
4.52
7.6
1300
50.0
32.7
0.65
2.29
57.8
21.9
3.5
1500
50.0
3.10
39.5
100.9
4.74
7.0
1500
51.9
36.7
0.71
2.40
60.1
21.6
3.7
1300
51.3
3.28
40.1
106.5
4.59
7.8
1300
50.6
33.0
0.65
2.17
58.0
23.3
3.3
1500
52.3
3.18
41.5
102.3
4.83
7.2
1500
52.6
37.1
0.71
2.28
60.4
23.0
3.6
1300
52.5
3.31
41.2
107.4
4.65
8.0
1300
51.1
33.0
0.65
2.11
58.3
24.2
3.0
1500
53.6
3.20
42.7
103.1
4.91
7.4
1500
53.1
37.1
0.70
2.22
60.7
24.0
3.4
1300
53.6
3.29
42.4
108.2
4.78
8.5
1300
49.7
33.1
0.66
2.56
58.5
19.4
4.4
1500
54.7
3.17
43.9
103.8
5.05
7.9
1500
51.5
37.2
0.72
2.68
60.7
19.2
4.7
1300
56.1
3.40
44.5
110.0
4.84
8.8
1300
50.5
33.4
0.66
2.43
58.8
20.8
4.1
1500
57.4
3.27
46.3
105.5
5.14
8.1
1500
52.3
37.5
0.72
2.54
61.0
20.6
4.5
1300
57.6
3.44
45.8
111.0
4.91
9.0
1300
51.0
33.4
0.65
2.36
59.1
21.6
3.8
1500
59.0
3.31
47.7
106.4
5.22
8.3
1500
52.9
37.5
0.71
2.47
61.3
21.4
4.2
1300
57.1
3.37
45.6
110.7
4.97
9.6
1300
47.7
32.3
0.68
2.87
57.5
16.6
5.6
1500
58.6
3.23
47.5
106.2
5.32
8.8
1500
49.3
36.3
0.74
2.99
59.5
16.5
5.9
1300
60.1
3.50
48.1
112.8
5.03
9.8
1300
48.5
32.7
0.67
2.71
57.8
17.9
5.2
1500
61.7
3.35
50.3
108.1
5.40
9.1
1500
50.2
36.7
0.73
2.83
59.8
17.7
5.6
1300
61.8
3.55
49.7
114.0
5.10
10.1
1300
49.0
32.7
0.67
2.64
58.0
18.6
4.8
1500
63.5
3.39
51.9
109.2
5.49
9.4
1500
50.7
36.7
0.72
2.75
60.1
18.4
5.4
1300
60.7
3.45
48.9
113.2
5.16
10.7
1300
44.5
30.8
0.69
3.20
55.4
13.9
7.0
1500
62.4
3.29
51.2
108.5
5.56
9.9
1500
45.9
34.7
0.76
3.34
57.3
13.7
7.4
1300
64.1
3.61
51.7
115.6
5.20
11.1
1300
45.4
31.2
0.69
3.03
55.7
15.0
6.5
1500
66.0
3.43
54.3
110.7
5.64
10.2
1500
46.8
35.0
0.75
3.15
57.6
14.8
7.1
1300
66.1
3.67
53.5
117.0
5.27
11.4
1300
45.9
31.2
0.68
2.94
55.9
15.6
6.1
1500
68.1
3.48
56.2
112.0
5.74
10.6
1500
47.3
35.0
0.74
3.06
57.7
15.4
6.7
Operation not recommended
7.1
6.0
12.0
120
3.3
0.9
12.0
110
3.4
0.9
12.0
100
3.5
1.0
12.0
90
3.7
1.0
12.0
80
8.7
1.0
6.0
70
3.8
6.0
12.0
60
9.0
6.0
12.0
50
3.9
Operation not recommended
1300
43.9
30.7
0.70
3.39
55.4
12.9
8.1
1500
45.1
34.5
0.77
3.52
57.1
12.8
8.8
1300
44.3
30.7
0.69
3.29
55.5
13.4
7.5
1500
45.6
34.5
0.76
3.42
57.2
13.3
8.4
1300
39.7
28.5
0.72
3.78
52.5
10.5
9.9
1500
40.7
32.0
0.79
3.91
54.0
10.4
10.8
1300
40.1
28.5
0.71
3.67
52.6
10.9
9.2
1500
41.1
32.0
0.78
3.80
54.0
10.8
10.2
Operation not recommended
Operation not recommended
6.8
1.8
Operation not recommended
3.8
6.6
1300
37.6
28.0
0.74
4.21
51.9
8.9
12.0
1500
38.4
31.4
0.82
4.36
53.3
8.8
13.0
1300
37.9
28.0
0.74
4.09
51.9
9.3
11.1
1500
38.8
31.4
0.81
4.23
53.2
9.2
12.4
WaterFurnace works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice. Please contact WaterFurnace at 1-800-478-5667 for latest design and
specifications. Purchaser’s approval of this data set signifies that the equipment is acceptable under the provisions of the job specification. Statements and other information contained herein are not express warranties and do not form the
basis of any bargain between the parties, but are merely WaterFurnace’s opinion or commendation of its products. The latest version of this document is available at www.waterfurnace.com.
SD1585
10/08
29
Page _____ of _____
Contractor:
Engineer:
ENVISION Residential Series
2-6 Tons 60Hz
P.O.:
Project Name:
Unit Tag:
NS060
NS060 - Single Speed - ECM
single speed
Capacity
(2000 CFM)
2000 Rated Data
CFM Cooling
2000 Rated CFM Cooling
Performance capacities shown in thousands of Btuh.
HEATING - EAT 70°F
Flow
Water
EWT
Rate
Pressure Drop
ºF
GPM
PSI
FT/HD
20
12.0
4.0
9.2
15.0
5.9
13.5
COOLING - EAT 80/67 °F
Airflow
HC
Power
HE
LAT
CFM
kBtuh
kW
kBtuh
ºF
COP
HWC
Airflow
TC
SC
S/T
Power
HR
kBtuh
CFM
kBtuh
kBtuh
Ratio
kW
kBtuh
HWC
EER
kBtuh
Operation not recommended
30
9.0
2.4
5.5
12.0
3.9
8.9
15.0
40
2.3
5.3
12.0
3.7
8.7
5.2
12.0
3.6
8.4
12.0
25.4
93.4
3.03
6.5
3.73
25.9
87.9
3.03
5.8
Operation not recommended
Operation not recommended
1500
42.7
3.66
30.2
96.3
3.41
6.8
1500
73.6
46.9
0.64
2.16
81.0
34.1
---
2000
43.5
3.73
30.8
90.1
3.42
6.2
2000
71.2
48.3
0.68
2.61
80.2
27.3
---
1500
44.0
3.76
31.2
97.2
3.43
7.0
1500
74.3
47.0
0.63
2.16
81.7
34.4
---
2000
44.9
3.83
31.8
90.8
3.44
6.4
2000
72.4
47.8
0.66
2.44
80.8
29.6
---
Operation not recommended
Operation not recommended
1500
50.3
3.82
37.3
101.1
3.86
7.5
1500
73.4
47.4
0.65
2.40
81.6
30.6
---
2000
51.5
3.90
38.2
93.8
3.87
6.9
2000
72.7
49.5
0.68
2.81
82.3
25.9
---
1500
51.7
3.91
38.4
101.9
3.88
7.8
1500
74.1
47.6
0.64
2.39
82.3
31.0
---
2000
52.7
3.97
39.2
94.4
3.89
7.1
2000
73.6
49.3
0.67
2.65
82.6
27.7
---
1500
56.2
3.96
42.7
104.7
4.15
8.1
1500
73.6
48.4
0.66
2.81
83.2
26.2
3.9
2000
56.8
4.01
43.1
96.3
4.15
7.5
2000
73.9
50.2
0.68
3.15
84.6
23.5
4.1
1500
56.8
3.95
43.3
105.0
4.21
8.4
1500
73.8
48.5
0.66
2.71
83.0
27.2
3.6
2000
58.3
4.05
44.4
97.0
4.21
7.7
2000
73.9
50.7
0.69
3.09
84.4
23.9
3.9
1500
58.2
4.04
44.4
105.9
4.23
8.6
1500
74.5
48.7
0.65
2.70
83.7
27.6
3.4
2000
59.3
4.09
45.3
97.5
4.25
7.9
2000
74.6
50.7
0.68
2.94
84.7
25.4
3.7
1500
62.1
4.10
48.1
108.3
4.44
9.1
1500
69.9
46.2
0.66
3.04
80.3
23.0
4.7
2000
63.1
4.13
49.0
99.2
4.48
8.4
2000
71.5
49.1
0.69
3.33
82.9
21.4
5.0
1500
63.6
4.11
49.5
109.3
4.53
9.4
1500
70.1
46.4
0.66
2.93
80.1
23.9
4.4
2000
64.5
4.17
50.3
99.9
4.53
8.7
2000
71.8
49.3
0.69
3.24
82.9
22.2
4.8
65.0
4.19
50.7
110.1
4.55
9.7
1500
70.8
46.7
0.66
2.91
80.7
24.4
4.1
1500
2000
66.3
4.24
51.9
100.7
4.59
8.9
2000
72.2
49.6
0.69
3.12
82.8
23.2
4.6
9.0
2.1
4.9
1500
68.2
4.25
53.7
112.1
4.71
10.3
1500
67.2
45.2
0.67
3.42
78.9
19.7
5.9
2000
69.6
4.27
55.1
102.2
4.78
9.5
2000
70.2
49.1
0.70
3.68
82.7
19.1
6.3
1500
70.6
4.29
56.0
113.6
4.83
10.6
1500
67.5
45.5
0.67
3.29
78.7
20.5
5.5
2000
70.9
4.31
56.2
102.8
4.82
9.8
2000
70.9
49.1
0.69
3.54
83.0
20.0
6.0
1500
72.0
4.35
57.1
114.4
4.84
10.9
1500
68.2
45.8
0.67
3.25
79.3
21.0
5.1
2000
73.6
4.40
58.6
104.1
4.90
10.0
2000
70.9
49.6
0.70
3.44
82.6
20.6
5.7
1500
72.9
4.36
58.0
115.0
4.90
11.5
1500
65.4
44.6
0.68
3.81
78.4
17.2
7.5
2000
74.2
4.37
59.3
104.4
4.98
10.7
2000
67.1
47.7
0.71
4.06
80.9
16.5
8.0
1500
76.2
4.44
61.0
117.0
5.03
11.9
1500
65.8
45.0
0.68
3.66
78.2
18.0
7.0
2000
76.8
4.39
61.8
105.6
5.13
11.0
2000
67.8
47.7
0.70
3.87
81.0
17.5
7.6
1500
77.4
4.49
62.0
117.8
5.05
12.2
1500
66.4
45.4
0.68
3.60
78.7
18.4
6.5
2000
78.9
4.53
63.5
106.5
5.11
11.3
2000
68.1
48.2
0.71
3.76
80.9
18.1
7.2
1500
77.8
4.49
62.4
118.0
5.07
13.0
1500
62.1
43.2
0.70
4.20
76.4
14.8
9.4
2000
79.0
4.49
63.7
106.6
5.16
12.0
2000
62.6
45.5
0.73
4.45
77.7
14.1
10.0
1500
81.9
4.60
66.2
120.6
5.22
13.4
1500
62.6
43.7
0.70
4.03
76.3
15.5
8.8
2000
82.9
4.49
67.6
108.4
5.41
12.4
2000
63.2
45.5
0.72
4.20
77.5
15.0
9.5
1500
83.0
4.65
67.1
121.2
5.24
13.8
1500
63.2
44.1
0.70
3.96
76.7
16.0
8.2
2000
84.5
4.68
68.5
109.1
5.30
12.8
2000
63.8
46.0
0.72
4.08
77.7
15.7
9.1
10.9
12.0
3.4
5.0
2.0
12.0
3.3
4.8
2.0
12.0
15.0
120
8.1
3.66
38.6
11.9
9.0
110
5.0
37.9
2000
5.2
15.0
100
3.5
12.3
1500
15.0
9.0
90
5.3
2.2
15.0
80
12.7
2.2
9.0
70
5.5
9.0
15.0
60
13.1
9.0
15.0
50
5.7
Operation not recommended
3.2
4.7
7.9
11.6
4.7
7.6
11.2
4.5
7.3
10.8
9.0
1.9
4.4
12.0
3.1
7.1
15.0
4.5
10.4
9.0
1.8
4.2
12.0
2.9
6.8
15.0
4.3
10.0
9.0
1.7
4.0
12.0
2.8
6.5
15.0
4.2
Operation not recommended
1500
60.1
42.9
0.71
4.59
75.7
13.1
2000
60.7
44.7
0.74
4.70
76.7
12.9
11.8
1500
60.7
43.4
0.72
4.49
76.0
13.5
10.1
2000
61.3
45.2
0.74
4.58
76.9
13.4
11.2
1500
54.9
39.9
0.73
5.08
72.3
10.8
13.4
2000
55.5
41.5
0.75
5.14
73.0
10.8
14.5
1500
55.5
40.4
0.73
4.96
72.4
11.2
12.4
2000
56.1
42.1
0.75
5.01
73.1
11.2
13.8
Operation not recommended
Operation not recommended
Operation not recommended
9.6
1500
52.9
40.5
0.77
5.78
72.6
9.1
16.1
2000
51.8
41.2
0.80
5.80
71.6
8.9
17.5
1500
53.4
41.1
0.77
5.62
72.6
9.5
15.0
2000
52.7
41.7
0.79
5.63
71.9
9.4
16.7
WaterFurnace works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice. Please contact WaterFurnace at 1-800-478-5667 for latest design and
specifications. Purchaser’s approval of this data set signifies that the equipment is acceptable under the provisions of the job specification. Statements and other information contained herein are not express warranties and do not form the
basis of any bargain between the parties, but are merely WaterFurnace’s opinion or commendation of its products. The latest version of this document is available at www.waterfurnace.com.
SD1585
10/08
30
Page _____ of _____
Contractor:
Engineer:
ENVISION Residential Series
2-6 Tons 60Hz
P.O.:
Project Name:
Unit Tag:
NS070
NS070 - Single Speed - ECM
single speed
Capacity
Data (2200 CFM)
2200 Rated CFM Heating
2200 Rated CFM Cooling
Performance capacities shown in thousands of Btuh.
HEATING - EAT 70°F
Flow
Water
EWT
Rate
Pressure Drop
ºF
GPM
PSI
FT/HD
20
15.0
4.4
10.2
18.0
6.0
13.9
COOLING - EAT 80/67 °F
Airflow
HC
Power
HE
LAT
CFM
kBtuh
kW
kBtuh
ºF
COP
HWC
Airflow
TC
SC
S/T
Power
HR
kBtuh
CFM
kBtuh
kBtuh
Ratio
kW
kBtuh
HWC
EER
kBtuh
Operation not recommended
30
12.0
3.0
6.8
15.0
4.3
9.9
18.0
40
2.9
6.6
15.0
4.1
9.6
6.4
15.0
4.0
9.3
15.0
18.0
12.0
15.0
18.0
12.0
80
90
15.0
3.9
5.3
2.6
3.8
5.1
2.5
3.6
6.2
9.0
12.3
6.0
8.7
11.9
5.8
8.4
11.5
12.0
2.4
5.6
15.0
3.5
8.1
4.8
11.1
12.0
2.3
5.4
15.0
3.4
7.8
4.6
2.2
5.2
15.0
3.3
7.5
4.4
2.2
5.0
15.0
3.1
7.2
4.3
44.7
4.37
29.8
94.3
3.00
7.7
2200
45.7
4.46
30.5
89.2
3.01
6.9
Operation not recommended
Operation not recommended
1700
51.5
4.47
36.2
98.0
3.38
8.1
1700
69.3
43.4
0.63
2.39
77.5
29.0
---
2200
52.7
4.57
37.2
92.2
3.38
7.4
2200
73.9
49.6
0.67
2.79
83.4
26.5
---
1700
51.7
4.49
36.4
98.2
3.38
8.4
1700
69.7
42.9
0.62
2.38
77.8
29.3
---
2200
52.9
4.58
37.3
92.3
3.39
7.6
2200
74.3
49.0
0.66
2.78
83.8
26.7
---
Operation not recommended
Operation not recommended
1700
60.1
4.66
44.2
102.7
3.78
8.9
1700
73.1
46.1
0.63
2.63
82.1
27.8
---
2200
61.5
4.72
45.5
95.9
3.82
8.2
2200
77.6
52.7
0.68
3.03
87.9
25.6
---
1700
60.5
4.69
44.5
102.9
3.78
9.2
1700
73.7
45.9
0.62
2.61
82.6
28.2
---
2200
62.0
4.74
45.8
96.1
3.83
8.4
2200
78.2
52.5
0.67
3.01
88.5
26.0
---
1700
66.2
4.81
49.8
106.1
4.04
9.7
1700
76.7
48.4
0.63
3.01
86.9
25.5
4.3
2200
67.9
4.83
51.4
98.6
4.12
8.9
2200
81.0
55.4
0.68
3.43
92.7
23.6
4.5
1700
67.6
4.85
51.0
106.8
4.08
10.0
1700
77.0
48.7
0.63
2.92
87.0
26.4
4.0
2200
69.2
4.86
52.7
99.1
4.17
9.2
2200
81.4
55.7
0.68
3.33
92.8
24.5
4.3
1700
68.2
4.89
51.5
107.1
4.09
10.3
1700
77.8
48.9
0.63
2.89
87.7
26.9
3.7
2200
69.9
4.89
53.2
99.4
4.19
9.4
2200
82.3
55.9
0.68
3.29
93.5
25.0
4.1
1700
73.4
5.00
56.4
110.0
4.30
10.8
1700
73.7
46.9
0.64
3.31
85.0
22.3
5.2
2200
75.3
4.97
58.3
101.7
4.44
10.0
2200
77.6
53.6
0.69
3.72
90.3
20.8
5.5
1700
75.5
5.07
58.3
111.1
4.37
11.2
1700
74.1
47.0
0.63
3.22
85.0
23.0
4.8
2200
77.5
5.03
60.3
102.6
4.52
10.3
2200
78.0
53.8
0.69
3.62
90.3
21.6
5.2
1700
76.4
5.11
59.0
111.6
4.38
11.5
1700
75.0
47.6
0.64
3.17
85.8
23.6
4.5
2200
78.4
5.06
61.2
103.0
4.54
10.6
2200
78.9
54.5
0.69
3.57
91.1
22.1
5.0
1700
81.0
5.21
63.2
114.1
4.56
12.2
1700
73.5
47.5
0.65
3.69
86.1
19.9
6.5
2200
83.1
5.13
65.6
105.0
4.75
11.3
2200
77.1
54.4
0.71
4.11
91.1
18.8
6.9
1700
83.9
5.30
65.8
115.7
4.64
12.6
1700
73.8
47.6
0.65
3.59
86.0
20.6
6.1
2200
86.2
5.21
68.4
106.3
4.85
11.6
2200
77.4
54.5
0.70
3.99
91.0
19.4
6.6
1700
85.1
5.35
66.8
116.3
4.66
13.0
1700
74.9
48.7
0.65
3.53
86.9
21.2
5.6
2200
87.4
5.25
69.5
106.8
4.88
11.9
2200
78.5
55.7
0.71
3.93
91.9
20.0
6.3
1700
86.5
5.40
68.0
117.1
4.69
13.7
1700
70.5
45.5
0.65
4.12
84.5
17.1
8.2
2200
88.9
5.27
70.9
107.4
4.94
12.7
2200
73.6
52.1
0.71
4.53
89.1
16.3
8.7
1700
90.4
5.52
71.6
119.2
4.80
14.1
1700
70.7
45.5
0.64
4.00
84.4
17.7
7.7
2200
93.0
5.38
74.6
109.1
5.07
13.1
2200
73.8
52.1
0.71
4.40
88.9
16.8
8.3
1700
91.8
5.58
72.8
120.0
4.82
14.6
1700
71.9
46.9
0.65
3.92
85.3
18.3
7.1
2200
94.6
5.42
76.1
109.8
5.11
13.5
2200
75.1
53.7
0.72
4.31
89.8
17.4
7.9
1700
92.4
5.62
73.2
120.3
4.82
15.4
1700
64.7
42.2
0.65
4.57
80.3
14.2
10.3
2200
95.1
5.43
76.5
110.0
5.13
14.3
2200
67.3
48.4
0.72
4.98
84.3
13.5
10.9
1700
97.3
5.76
77.6
123.0
4.95
15.9
1700
64.9
42.1
0.65
4.45
80.1
14.6
9.6
2200
100.2
5.56
81.2
112.2
5.28
14.7
2200
67.5
48.3
0.72
4.84
84.0
13.9
10.4
1700
99.0
5.83
79.1
123.9
4.98
16.4
1700
66.2
43.8
0.66
4.35
81.0
15.2
8.9
2200
102.2
5.61
83.0
113.0
5.34
15.2
2200
68.8
50.3
0.73
4.73
85.0
14.6
9.9
Operation not recommended
1700
63.0
41.6
0.66
5.01
80.1
12.6
12.0
2200
65.3
47.7
0.73
5.39
83.7
12.1
13.0
1700
64.4
43.7
0.68
4.88
81.0
13.2
11.1
2200
66.7
50.1
0.75
5.24
84.6
12.7
12.3
1700
55.9
37.0
0.66
5.58
74.9
10.0
14.6
2200
57.7
42.4
0.74
5.94
77.9
9.7
15.9
1700
57.3
39.1
0.68
5.41
75.7
10.6
13.6
2200
59.1
44.9
0.76
5.76
78.8
10.3
15.1
Operation not recommended
Operation not recommended
10.2
12.0
18.0
1700
10.7
12.0
18.0
120
2.7
12.7
5.0
18.0
110
5.5
18.0
18.0
100
13.1
2.8
12.0
70
5.7
12.0
18.0
60
13.5
12.0
18.0
50
5.8
Operation not recommended
Operation not recommended
9.8
1700
53.1
37.4
0.71
6.27
74.4
8.5
17.7
2200
54.5
43.0
0.79
6.60
77.1
8.3
19.2
1700
54.5
40.0
0.73
6.06
75.2
9.0
16.4
2200
56.0
45.9
0.82
6.38
77.8
8.8
18.2
WaterFurnace works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice. Please contact WaterFurnace at 1-800-478-5667 for latest design and
specifications. Purchaser’s approval of this data set signifies that the equipment is acceptable under the provisions of the job specification. Statements and other information contained herein are not express warranties and do not form the
basis of any bargain between the parties, but are merely WaterFurnace’s opinion or commendation of its products. The latest version of this document is available at www.waterfurnace.com.
SD1585
10/08
31
Page _____ of _____
Contractor:
Engineer:
ENVISION Residential Series
2-6 Tons 60Hz
P.O.:
Project Name:
Unit Tag:
ND026
low speed
ND026
- Dual Capacity - ECM
Low
700Speed
Rated CFM (700
Heating CFM)
700 Rated CFM Cooling
Performance capacities shown in thousands of Btuh.
HEATING - EAT 70°F
Flow
Water
EWT
Rate
Pressure Drop
ºF
GPM
PSI
FT/HD
20
5.0
2.0
4.7
7.0
3.7
8.7
COOLING - EAT 80/67 °F
Airflow
HC
Power
HE
LAT
CFM
kBtuh
kW
kBtuh
ºF
COP
HWC
Airflow
TC
SC
S/T
Power
HR
kBtuh
CFM
kBtuh
kBtuh
Ratio
kW
kBtuh
HWC
EER
kBtuh
Operation not recommended
30
3.0
0.8
1.8
5.0
2.0
4.5
7.0
40
0.8
1.8
5.0
1.9
4.4
1.7
5.0
1.8
4.3
5.0
7.0
3.0
5.0
7.0
3.0
80
5.0
7.0
3.0
90
5.0
7.0
100
0.7
1.8
3.3
0.7
1.7
3.2
0.7
1.7
3.1
0.7
1.6
3.0
7.9
1.7
4.1
7.6
1.6
4.0
7.4
1.6
3.9
7.1
1.5
3.7
6.9
0.6
1.5
5.0
1.6
3.6
2.9
0.6
1.4
5.0
1.5
3.4
2.8
0.6
1.3
5.0
1.4
3.3
2.7
11.9
1.07
8.3
92.0
3.27
1.8
12.1
1.08
8.4
86.0
3.28
1.6
Operation not recommended
Operation not recommended
500
13.7
1.08
10.0
95.3
3.71
1.8
500
22.0
14.6
0.66
0.54
23.9
40.7
---
700
14.0
1.09
10.2
88.5
3.76
1.6
700
22.4
16.0
0.71
0.57
24.3
39.3
---
500
14.0
1.09
10.2
95.8
3.76
1.8
500
22.2
14.6
0.66
0.52
23.9
42.2
---
700
14.1
1.10
10.4
88.7
3.78
1.6
700
22.7
16.0
0.70
0.55
24.6
41.2
---
Operation not recommended
Operation not recommended
500
16.1
1.09
12.4
99.9
4.34
1.8
500
22.9
15.3
0.67
0.59
24.9
38.5
---
700
16.4
1.09
12.7
91.8
4.41
1.7
700
23.3
16.6
0.71
0.62
25.4
37.4
---
500
16.4
1.10
12.6
100.4
4.36
1.9
500
23.0
15.3
0.66
0.58
25.0
40.0
---
700
16.7
1.10
13.0
92.1
4.44
1.7
700
23.6
16.6
0.71
0.60
25.6
39.1
---
500
17.4
1.09
13.7
102.3
4.71
1.9
500
23.3
15.6
0.67
0.70
25.7
33.2
0.7
700
17.8
1.09
14.1
93.5
4.80
1.7
700
23.8
17.1
0.72
0.73
26.3
32.6
0.8
500
18.3
1.11
14.5
103.9
4.84
1.9
500
23.5
15.8
0.67
0.67
25.8
35.3
0.7
700
18.7
1.11
14.9
94.7
4.93
1.8
700
24.0
17.2
0.72
0.70
26.4
34.6
0.7
500
18.6
1.13
14.7
104.4
4.84
2.0
500
23.8
15.8
0.66
0.65
26.0
36.8
0.6
700
19.0
1.12
15.2
95.2
4.99
1.8
700
24.3
17.2
0.71
0.67
26.6
36.0
0.7
500
19.7
1.10
16.0
106.5
5.23
2.1
500
22.6
15.4
0.68
0.79
25.3
28.5
1.0
700
20.2
1.09
16.4
96.7
5.41
1.9
700
23.0
16.7
0.73
0.82
25.8
27.9
1.0
500
20.6
1.13
16.8
108.2
5.37
2.1
500
22.8
15.5
0.68
0.75
25.3
30.3
0.9
700
21.2
1.12
17.4
98.0
5.54
2.0
700
23.3
16.9
0.73
0.78
25.9
29.7
1.0
500
21.0
1.14
17.1
108.9
5.39
2.2
500
23.0
15.5
0.67
0.73
25.5
31.5
0.8
700
21.5
1.13
17.7
98.5
5.60
2.0
700
23.5
16.9
0.72
0.76
26.0
31.0
0.9
500
22.1
1.12
18.3
111.0
5.80
2.3
500
22.6
15.6
0.69
0.90
25.6
24.9
1.3
700
22.7
1.10
18.9
100.0
6.05
2.1
700
23.0
16.9
0.74
0.94
26.2
24.5
1.4
500
23.1
1.14
19.2
112.8
5.94
2.4
500
22.7
15.7
0.69
0.85
25.7
26.6
1.3
700
23.8
1.13
20.0
101.5
6.20
2.2
700
23.3
17.1
0.74
0.89
26.3
26.1
1.4
500
23.5
1.15
19.6
113.6
5.97
2.4
500
23.0
15.7
0.68
0.83
25.8
27.6
1.2
700
24.2
1.13
20.3
101.9
6.25
2.2
700
23.4
17.1
0.73
0.86
26.4
27.2
1.3
500
24.0
1.15
20.1
114.5
6.13
2.6
500
21.3
15.0
0.71
1.03
24.8
20.6
1.8
700
24.7
1.12
20.9
102.7
6.47
2.4
700
21.7
16.3
0.75
1.07
25.4
20.3
1.9
500
25.1
1.17
21.1
116.4
6.26
2.6
500
21.4
15.2
0.71
0.98
24.8
21.9
1.7
700
25.9
1.15
22.0
104.3
6.63
2.4
700
21.9
16.5
0.75
1.01
25.4
21.7
1.9
500
25.5
1.19
21.5
117.2
6.29
2.7
500
21.7
15.2
0.70
0.95
25.0
22.9
1.6
700
26.3
1.16
22.4
104.8
6.68
2.5
700
22.1
16.5
0.75
0.98
25.5
22.5
1.8
500
26.0
1.18
22.0
118.2
6.50
2.9
500
19.4
14.2
0.73
1.18
23.5
16.4
2.4
700
26.9
1.14
23.0
105.6
6.92
2.7
700
19.9
15.4
0.77
1.22
24.0
16.3
2.6
500
27.2
1.20
23.1
120.3
6.62
3.0
500
19.6
14.4
0.73
1.12
23.4
17.5
2.3
700
28.1
1.16
24.2
107.2
7.10
2.8
700
20.1
15.6
0.78
1.15
24.0
17.4
2.5
500
27.6
1.22
23.5
121.1
6.65
3.1
500
19.9
14.4
0.72
1.08
23.6
18.4
2.1
700
28.7
1.18
24.6
107.9
7.15
2.8
700
20.2
15.6
0.77
1.12
24.1
18.1
2.4
500
18.9
14.2
0.75
1.28
23.3
14.8
3.0
700
19.3
15.4
0.80
1.32
23.8
14.7
3.2
500
19.2
14.2
0.74
1.24
23.4
15.4
2.8
700
19.5
15.4
0.79
1.28
23.9
15.2
3.1
Operation not recommended
Operation not recommended
Operation not recommended
6.4
3.0
7.0
500
700
6.6
3.0
7.0
120
3.4
3.0
7.0
110
8.2
0.7
3.0
70
3.5
3.0
7.0
60
8.4
3.0
7.0
50
3.6
Operation not recommended
500
16.6
13.1
0.79
1.45
21.6
11.4
3.8
700
17.0
14.2
0.84
1.50
22.1
11.3
4.1
500
16.8
13.1
0.78
1.41
21.6
11.9
3.5
700
17.1
14.2
0.83
1.45
22.1
11.8
3.9
Operation not recommended
6.1
500
15.9
13.0
0.82
1.65
21.5
9.6
4.7
700
16.2
14.1
0.87
1.70
22.0
9.5
5.1
500
16.0
13.0
0.81
1.60
21.5
10.0
4.3
700
16.4
14.1
0.86
1.65
22.0
9.9
4.8
WaterFurnace works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice. Please contact WaterFurnace at 1-800-478-5667 for latest design and
specifications. Purchaser’s approval of this data set signifies that the equipment is acceptable under the provisions of the job specification. Statements and other information contained herein are not express warranties and do not form the
basis of any bargain between the parties, but are merely WaterFurnace’s opinion or commendation of its products. The latest version of this document is available at www.waterfurnace.com.
SD1585
10/08
32
Page _____ of _____
Contractor:
Engineer:
ENVISION Residential Series
2-6 Tons 60Hz
P.O.:
Project Name:
Unit Tag:
ND026
ND026 - Dual Capacity - ECM
high speed
High
Speed
(900 CFM)
900 Rated
CFM Heating
900 Rated CFM Cooling
Performance capacities shown in thousands of Btuh.
HEATING - EAT 70°F
Flow
Water
EWT
Rate
Pressure Drop
ºF
GPM
PSI
FT/HD
20
6.0
2.9
6.6
8.0
4.8
11.1
COOLING - EAT 80/67 °F
Airflow
HC
Power
HE
LAT
CFM
kBtuh
kW
kBtuh
ºF
COP
HWC
Airflow
TC
SC
S/T
Power
HR
kBtuh
CFM
kBtuh
kBtuh
Ratio
kW
kBtuh
HWC
EER
kBtuh
Operation not recommended
30
4.0
1.4
3.2
6.0
2.8
6.4
8.0
40
1.3
3.1
6.0
2.7
6.2
3.0
6.0
2.6
6.0
6.0
8.0
4.0
6.0
8.0
4.0
80
6.0
8.0
4.0
90
6.0
8.0
100
1.2
2.5
4.2
1.2
2.4
4.1
1.2
2.4
4.0
1.1
2.3
3.8
10.1
2.9
5.8
9.8
2.8
5.6
9.5
2.7
5.4
9.2
2.6
5.2
8.8
1.1
2.5
6.0
2.2
5.1
3.7
1.0
2.4
6.0
2.1
4.9
3.5
1.0
2.3
6.0
2.0
4.7
3.4
16.4
1.43
11.5
91.7
3.36
2.1
900
16.6
1.44
11.7
87.1
3.38
1.9
Operation not recommended
Operation not recommended
700
18.8
1.47
13.8
94.9
3.75
2.3
700
29.2
19.3
0.66
0.96
32.5
30.3
---
900
19.2
1.48
14.1
89.7
3.80
2.1
900
29.7
21.1
0.71
1.02
33.2
29.2
---
700
19.2
1.48
14.1
95.4
3.80
2.3
700
29.4
19.3
0.66
0.94
32.6
31.4
---
900
19.4
1.49
14.3
90.0
3.81
2.1
900
30.1
21.1
0.70
0.98
33.5
30.7
---
Operation not recommended
Operation not recommended
700
21.9
1.53
16.6
98.9
4.19
2.5
700
29.7
19.8
0.67
1.05
33.2
28.3
---
900
22.3
1.53
17.1
92.9
4.26
2.3
900
30.2
21.6
0.72
1.10
34.0
27.5
---
700
22.2
1.55
17.0
99.4
4.22
2.6
700
29.9
19.8
0.66
1.02
33.4
29.4
---
900
22.7
1.55
17.4
93.3
4.30
2.4
900
30.5
21.6
0.71
1.06
34.2
28.7
---
700
23.6
1.57
18.3
101.2
4.42
2.7
700
29.4
20.0
0.68
1.22
33.6
24.1
1.3
900
24.1
1.57
18.7
94.8
4.51
2.5
900
30.1
21.9
0.73
1.27
34.4
23.7
1.4
700
24.8
1.60
19.3
102.8
4.54
2.8
700
29.7
20.3
0.68
1.16
33.7
25.6
1.3
900
25.3
1.60
19.8
96.0
4.63
2.6
900
30.4
22.1
0.73
1.21
34.5
25.1
1.4
700
25.1
1.62
19.6
103.3
4.54
2.9
700
30.1
20.3
0.67
1.12
33.9
26.7
1.2
900
25.7
1.61
20.2
96.5
4.68
2.7
900
30.7
22.1
0.72
1.17
34.7
26.1
1.3
700
26.6
1.65
20.9
105.1
4.72
3.1
700
29.1
19.9
0.68
1.33
33.6
21.9
1.6
900
27.1
1.63
21.6
97.9
4.88
2.9
900
29.7
21.7
0.73
1.38
34.4
21.5
1.7
700
27.8
1.68
22.1
106.8
4.84
3.2
700
29.4
20.1
0.68
1.26
33.7
23.4
1.5
900
28.5
1.67
22.8
99.3
5.00
2.9
900
30.0
21.9
0.73
1.31
34.5
22.9
1.6
700
28.3
1.70
22.4
107.4
4.86
3.3
700
29.7
20.1
0.68
1.22
33.9
24.3
1.4
900
29.0
1.68
23.2
99.8
5.05
3.0
900
30.3
21.9
0.72
1.27
34.6
23.9
1.6
700
29.6
1.74
23.7
109.2
5.00
3.5
700
28.7
19.9
0.69
1.48
33.8
19.5
2.0
900
30.3
1.70
24.5
101.2
5.22
3.2
900
29.3
21.6
0.74
1.53
34.5
19.1
2.1
700
30.9
1.77
24.9
110.9
5.12
3.6
700
29.0
20.0
0.69
1.39
33.7
20.8
1.9
900
31.9
1.75
25.9
102.8
5.34
3.3
900
29.6
21.8
0.74
1.45
34.6
20.4
2.0
700
31.5
1.79
25.4
111.7
5.15
3.7
700
29.3
20.0
0.68
1.36
34.0
21.6
1.7
900
32.3
1.76
26.3
103.3
5.39
3.4
900
29.9
21.8
0.73
1.41
34.7
21.2
1.9
700
32.3
1.84
26.0
112.7
5.14
3.9
700
27.6
19.5
0.71
1.63
33.2
16.9
2.5
900
33.3
1.80
27.1
104.2
5.43
3.6
900
28.2
21.1
0.75
1.69
34.0
16.7
2.7
700
33.7
1.88
27.3
114.6
5.25
4.0
700
27.8
19.7
0.71
1.55
33.1
18.0
2.3
900
34.8
1.84
28.6
105.8
5.56
3.7
900
28.5
21.4
0.75
1.60
33.9
17.8
2.5
700
34.3
1.90
27.8
115.4
5.28
4.1
700
28.2
19.7
0.70
1.50
33.3
18.8
2.2
900
35.4
1.85
29.1
106.4
5.60
3.8
900
28.7
21.4
0.75
1.55
34.0
18.5
2.4
700
35.1
1.95
28.5
116.5
5.27
4.3
700
26.1
18.8
0.72
1.81
32.3
14.5
3.1
900
36.3
1.89
29.8
107.3
5.62
4.0
900
26.7
20.4
0.76
1.86
33.1
14.4
3.3
700
36.6
2.00
29.8
118.5
5.37
4.5
700
26.4
19.1
0.72
1.71
32.2
15.4
2.9
900
37.9
1.93
31.4
109.0
5.76
4.1
900
27.0
20.7
0.77
1.76
33.0
15.3
3.2
700
37.2
2.02
30.3
119.3
5.39
4.6
700
26.7
19.1
0.71
1.65
32.4
16.2
2.7
900
38.6
1.95
32.0
109.8
5.80
4.3
900
27.2
20.7
0.76
1.71
33.1
15.9
3.0
Operation not recommended
700
25.1
18.5
0.74
1.92
31.6
13.1
3.6
900
25.6
20.1
0.78
1.97
32.3
13.0
3.9
700
25.4
18.5
0.73
1.86
31.7
13.7
3.3
900
25.8
20.1
0.78
1.92
32.4
13.5
3.7
700
23.0
17.4
0.76
2.12
30.2
10.8
4.4
900
23.5
19.0
0.81
2.18
30.9
10.7
4.7
700
23.2
17.4
0.75
2.06
30.2
11.3
4.1
900
23.7
19.0
0.80
2.12
30.9
11.2
4.5
Operation not recommended
Operation not recommended
8.2
4.0
8.0
700
8.5
4.0
8.0
120
4.4
4.0
8.0
110
10.4
1.3
4.0
70
4.5
4.0
8.0
60
10.8
4.0
8.0
50
4.7
Operation not recommended
Operation not recommended
7.9
700
21.3
16.7
0.79
2.38
29.4
8.9
5.3
900
21.6
18.2
0.84
2.44
30.0
8.9
5.7
700
21.4
16.7
0.78
2.30
29.3
9.3
4.9
900
21.9
18.2
0.83
2.37
30.0
9.2
5.4
WaterFurnace works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice. Please contact WaterFurnace at 1-800-478-5667 for latest design and
specifications. Purchaser’s approval of this data set signifies that the equipment is acceptable under the provisions of the job specification. Statements and other information contained herein are not express warranties and do not form the
basis of any bargain between the parties, but are merely WaterFurnace’s opinion or commendation of its products. The latest version of this document is available at www.waterfurnace.com.
SD1585
10/08
33
Page _____ of _____
Contractor:
Engineer:
ENVISION Residential Series
2-6 Tons 60Hz
P.O.:
Project Name:
Unit Tag:
ND038
ND038 - Dual Capacity - ECM
low speed
Low
(1050 CFM)
1050 Speed
Rated CFM Heating
1050 Rated CFM Cooling
Performance capacities shown in thousands of Btuh.
HEATING - EAT 70°F
Flow
Water
EWT
Rate
Pressure Drop
ºF
GPM
PSI
FT/HD
20
6.0
1.7
4.0
8.0
2.9
6.7
COOLING - EAT 80/67 °F
Airflow
HC
Power
HE
LAT
CFM
kBtuh
kW
kBtuh
ºF
COP
HWC
Airflow
TC
SC
S/T
Power
HR
kBtuh
CFM
kBtuh
kBtuh
Ratio
kW
kBtuh
HWC
EER
kBtuh
Operation not recommended
30
4.0
0.9
2.0
6.0
1.7
3.9
8.0
40
0.8
1.9
6.0
1.6
3.8
1.9
6.0
1.6
3.7
6.0
8.0
4.0
6.0
8.0
4.0
80
6.0
8.0
4.0
90
6.0
8.0
100
0.8
1.5
2.5
0.8
1.5
2.5
0.7
1.4
2.4
0.7
1.4
2.3
6.1
1.8
3.6
5.9
1.8
3.5
5.7
1.7
3.3
5.5
1.6
3.2
5.3
0.7
1.6
6.0
1.3
3.1
2.2
0.7
1.5
6.0
1.3
3.0
2.1
0.6
1.5
6.0
1.2
2.9
2.0
15.7
1.37
11.1
86.2
3.37
2.5
16.4
1.40
11.6
84.5
3.42
2.3
Operation not recommended
Operation not recommended
900
17.5
1.35
12.9
88.0
3.78
2.4
900
29.1
18.4
0.63
0.74
31.6
39.3
---
1050
18.2
1.39
13.5
86.1
3.84
2.2
1050
29.9
20.4
0.68
0.75
32.5
39.6
---
900
18.6
1.39
13.9
89.1
3.93
2.5
900
29.6
18.9
0.64
0.73
32.1
40.3
---
1050
19.4
1.42
14.5
87.1
3.99
2.3
1050
30.4
20.9
0.69
0.75
33.0
40.6
---
900
20.6
1.38
15.9
91.2
4.39
2.5
900
30.3
19.7
0.65
0.80
33.0
37.8
---
1050
21.4
1.41
16.6
88.8
4.45
2.3
1050
31.1
21.8
0.70
0.82
33.9
38.1
---
900
21.8
1.41
16.9
92.4
4.51
2.6
900
30.8
20.2
0.66
0.79
33.5
38.8
---
1050
22.5
1.44
17.6
89.8
4.58
2.4
1050
31.7
22.4
0.71
0.81
34.4
39.1
---
900
22.7
1.40
17.9
93.4
4.75
2.6
900
31.3
21.1
0.67
0.91
34.4
34.3
1.0
1050
23.4
1.42
18.6
90.7
4.83
2.4
1050
32.2
23.4
0.73
0.93
35.3
34.6
1.1
900
23.5
1.40
18.7
94.2
4.91
2.7
900
31.6
21.2
0.67
0.89
34.6
35.5
0.9
1050
24.2
1.42
19.4
91.4
5.00
2.5
1050
32.5
23.5
0.72
0.91
35.6
35.8
1.0
900
24.6
1.44
19.7
95.4
5.02
2.8
900
32.1
21.8
0.68
0.88
35.1
36.4
0.9
1050
25.4
1.46
20.4
92.4
5.11
2.5
1050
33.0
24.1
0.73
0.90
36.1
36.7
1.0
900
25.6
1.43
20.8
96.4
5.25
2.9
900
30.1
20.3
0.68
1.02
33.5
29.5
1.3
1050
26.3
1.44
21.4
93.2
5.34
2.6
1050
30.9
22.5
0.73
1.04
34.4
29.7
1.4
900
26.7
1.43
21.8
97.4
5.47
3.0
900
30.3
20.5
0.67
0.99
33.7
30.5
1.3
1050
27.3
1.44
22.4
94.1
5.57
2.7
1050
31.2
22.6
0.73
1.01
34.6
30.8
1.4
900
27.6
1.46
22.6
98.4
5.54
3.0
900
30.8
21.0
0.68
0.98
34.2
31.3
1.2
1050
28.2
1.47
23.2
94.9
5.64
2.8
1050
31.7
23.2
0.73
1.00
35.1
31.6
1.3
Operation not recommended
Operation not recommended
900
28.5
1.46
23.5
99.3
5.74
3.2
900
29.7
20.6
0.69
1.16
33.6
25.7
1.9
1050
29.0
1.46
24.1
95.6
5.84
2.9
1050
30.5
22.8
0.75
1.18
34.5
25.9
2.0
900
29.7
1.45
24.8
100.6
6.01
3.3
900
29.9
20.7
0.69
1.13
33.8
26.6
1.7
1050
30.3
1.45
25.3
96.7
6.13
3.0
1050
30.8
23.0
0.75
1.15
34.7
26.8
1.9
900
30.5
1.48
25.4
101.4
6.04
3.4
900
30.4
21.3
0.70
1.12
34.2
27.3
1.6
1050
31.0
1.48
26.0
97.4
6.15
3.1
1050
31.3
23.5
0.75
1.14
35.2
27.5
1.8
900
31.2
1.48
26.1
102.1
6.16
3.6
900
28.6
20.2
0.71
1.32
33.1
21.7
2.5
1050
31.6
1.47
26.6
97.9
6.28
3.3
1050
29.4
22.4
0.76
1.34
33.9
21.9
2.7
900
32.7
1.47
27.6
103.6
6.50
3.7
900
28.8
20.3
0.71
1.28
33.2
22.5
2.4
1050
33.0
1.46
28.1
99.1
6.63
3.4
1050
29.6
22.5
0.76
1.31
34.1
22.7
2.6
900
33.1
1.50
28.0
104.1
6.46
3.8
900
29.3
20.8
0.71
1.27
33.6
23.0
2.2
1050
33.5
1.49
28.4
99.5
6.58
3.5
1050
30.1
23.1
0.77
1.30
34.5
23.2
2.5
900
33.8
1.51
28.7
104.8
6.57
4.0
900
26.5
18.9
0.71
1.50
31.6
17.6
3.4
1050
34.1
1.49
29.0
100.1
6.71
3.7
1050
27.2
20.9
0.77
1.53
32.4
17.8
3.6
900
35.5
1.49
30.4
106.6
6.97
4.2
900
26.7
19.0
0.71
1.46
31.7
18.3
3.2
1050
35.8
1.47
30.7
101.5
7.12
3.8
1050
27.4
21.0
0.77
1.49
32.5
18.4
3.4
900
35.7
1.52
30.5
106.7
6.87
4.3
900
27.1
19.5
0.72
1.45
32.1
18.7
2.9
1050
35.9
1.50
30.7
101.6
7.01
4.0
1050
27.9
21.6
0.77
1.48
32.9
18.9
3.3
900
25.8
19.3
0.75
1.67
31.5
15.4
4.1
1050
26.5
21.4
0.81
1.70
32.3
15.6
4.5
900
26.2
19.8
0.76
1.65
31.8
15.8
3.8
1050
26.9
21.9
0.81
1.69
32.7
16.0
4.2
Operation not recommended
Operation not recommended
Operation not recommended
4.9
4.0
8.0
900
1050
5.1
4.0
8.0
120
2.6
4.0
8.0
110
6.3
0.8
4.0
70
2.7
4.0
8.0
60
6.5
4.0
8.0
50
2.8
Operation not recommended
900
23.1
18.1
0.79
1.90
29.6
12.2
5.2
1050
23.7
20.1
0.85
1.93
30.3
12.3
5.7
900
23.5
18.6
0.79
1.88
29.9
12.5
4.8
1050
24.1
20.6
0.85
1.92
30.7
12.6
5.4
Operation not recommended
4.7
900
21.9
18.0
0.82
2.15
29.2
10.2
6.5
1050
22.5
19.9
0.88
2.20
30.0
10.2
7.0
900
22.2
18.4
0.83
2.13
29.5
10.4
6.0
1050
22.9
20.4
0.89
2.18
30.3
10.5
6.7
WaterFurnace works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice. Please contact WaterFurnace at 1-800-478-5667 for latest design and
specifications. Purchaser’s approval of this data set signifies that the equipment is acceptable under the provisions of the job specification. Statements and other information contained herein are not express warranties and do not form the
basis of any bargain between the parties, but are merely WaterFurnace’s opinion or commendation of its products. The latest version of this document is available at www.waterfurnace.com.
SD1585
10/08
34
Page _____ of _____
Contractor:
Engineer:
ENVISION Residential Series
2-6 Tons 60Hz
P.O.:
Project Name:
Unit Tag:
ND038
high speed
ND038
- Dual Capacity - ECM
High
Speed
(1250 CFM)
1250 Rated
CFM Heatling
1250 Rated CFM Cooling
Performance capacities shown in thousands of Btuh.
HEATING - EAT 70°F
Flow
Water
EWT
Rate
Pressure Drop
ºF
GPM
PSI
FT/HD
20
7.0
2.3
5.2
9.0
3.5
8.1
COOLING - EAT 80/67 °F
Airflow
HC
Power
HE
LAT
CFM
kBtuh
kW
kBtuh
ºF
COP
HWC
Airflow
TC
SC
S/T
Power
HR
kBtuh
CFM
kBtuh
kBtuh
Ratio
kW
kBtuh
HWC
EER
kBtuh
Operation not recommended
30
5.0
1.2
2.9
7.0
2.2
5.1
9.0
40
1.2
2.8
7.0
2.1
4.9
2.7
7.0
2.1
4.8
7.0
9.0
5.0
7.0
9.0
5.0
80
7.0
9.0
5.0
90
7.0
9.0
100
1.1
2.0
3.1
1.1
1.9
3.0
1.1
1.9
2.9
1.0
1.8
2.8
7.4
2.6
4.6
7.2
2.5
4.5
6.9
2.5
4.3
6.7
2.4
4.2
6.5
1.0
2.3
7.0
1.7
4.0
2.7
1.0
2.2
7.0
1.7
3.9
2.6
0.9
2.1
7.0
1.6
3.7
2.5
22.5
1.94
15.9
89.8
3.41
2.9
1250
23.2
1.99
16.4
87.2
3.41
2.6
Operation not recommended
Operation not recommended
1050
25.9
1.97
19.2
92.8
3.85
3.1
1050
37.9
22.5
0.59
1.41
42.8
27.0
---
1250
26.6
2.03
19.7
89.7
3.84
2.8
1250
40.1
25.1
0.63
1.49
45.2
26.9
---
1050
26.3
1.99
19.5
93.2
3.87
3.2
1050
38.2
24.8
0.65
1.37
42.9
28.0
---
1250
27.2
2.05
20.2
90.1
3.88
2.9
1250
40.5
27.5
0.68
1.46
45.5
27.8
---
Operation not recommended
Operation not recommended
1050
30.2
2.09
23.1
96.7
4.24
3.4
1050
39.4
24.1
0.61
1.55
44.7
25.4
---
1250
31.2
2.13
23.9
93.1
4.28
3.1
1250
41.5
26.8
0.65
1.64
47.1
25.4
---
1050
30.8
2.11
23.6
97.2
4.29
3.5
1050
39.7
26.1
0.66
1.51
44.9
26.3
---
1250
31.8
2.15
24.5
93.6
4.33
3.2
1250
42.0
29.0
0.69
1.60
47.4
26.2
---
1050
32.8
2.14
25.5
98.9
4.48
3.7
1050
39.6
25.1
0.63
1.84
45.9
21.5
1.9
1250
33.7
2.17
26.3
95.0
4.56
3.4
1250
41.7
27.9
0.67
1.94
48.3
21.5
2.0
1050
34.0
2.19
26.5
99.9
4.54
3.8
1050
40.5
25.4
0.63
1.74
46.4
23.3
1.8
1250
35.0
2.22
27.5
96.0
4.63
3.5
1250
42.6
28.2
0.66
1.82
48.8
23.4
1.9
1050
34.7
2.21
27.2
100.6
4.60
3.9
1050
40.9
27.1
0.66
1.69
46.7
24.1
1.7
1250
35.8
2.24
28.2
96.5
4.69
3.6
1250
43.1
30.1
0.70
1.78
49.1
24.2
1.8
1050
36.1
2.25
28.5
101.9
4.71
4.2
1050
39.2
25.7
0.66
1.96
45.9
20.0
2.3
1250
37.3
2.26
29.6
97.6
4.83
3.8
1250
41.1
28.6
0.70
2.05
48.1
20.1
2.4
1050
37.8
2.31
29.9
103.3
4.79
4.3
1050
40.2
26.0
0.65
1.87
46.5
21.5
2.2
1250
39.0
2.33
31.0
98.9
4.91
4.0
1250
42.1
28.9
0.69
1.94
48.7
21.6
2.3
1050
38.7
2.33
30.7
104.1
4.85
4.4
1050
40.5
27.4
0.68
1.82
46.8
22.3
2.0
1250
39.9
2.34
31.9
99.6
4.99
4.1
1250
42.5
30.4
0.71
1.90
49.0
22.4
2.2
1050
39.6
2.37
31.5
104.9
4.90
4.7
1050
39.2
26.6
0.68
2.15
46.5
18.2
2.9
1250
40.9
2.37
32.8
100.3
5.07
4.3
1250
40.9
29.6
0.72
2.24
48.5
18.3
3.0
1050
41.6
2.45
33.3
106.7
4.99
4.8
1050
40.2
26.9
0.67
2.06
47.2
19.5
2.7
1250
43.0
2.45
34.6
101.8
5.15
4.4
1250
41.9
29.8
0.71
2.13
49.2
19.6
2.9
1050
42.7
2.47
34.2
107.6
5.05
5.0
1050
40.6
28.0
0.69
2.01
47.5
20.2
2.5
1250
44.1
2.47
35.7
102.7
5.25
4.6
1250
42.4
31.0
0.73
2.09
49.6
20.3
2.8
1050
42.1
2.46
33.7
107.1
5.01
5.2
1050
37.8
26.2
0.69
2.34
45.8
16.1
3.6
1250
43.6
2.44
35.2
102.3
5.22
4.8
1250
39.3
29.2
0.74
2.42
47.5
16.3
3.8
1050
44.5
2.56
35.8
109.3
5.09
5.4
1050
38.8
26.6
0.68
2.26
46.6
17.2
3.3
1250
46.0
2.54
37.4
104.1
5.32
5.0
1250
40.4
29.4
0.73
2.33
48.3
17.4
3.6
1050
45.8
2.60
37.0
110.4
5.17
5.6
1050
39.3
27.2
0.69
2.21
46.8
17.7
3.1
1250
47.4
2.56
38.7
105.1
5.43
5.1
1250
40.9
30.1
0.74
2.28
48.7
17.9
3.4
1050
44.7
2.58
35.9
109.4
5.08
5.9
1050
35.7
25.5
0.71
2.53
44.3
14.1
4.4
1250
46.3
2.54
37.6
104.3
5.34
5.4
1250
37.0
28.4
0.77
2.59
45.8
14.3
4.7
1050
47.5
2.69
38.3
111.9
5.17
6.0
1050
36.8
25.9
0.70
2.46
45.1
15.0
4.1
1250
49.2
2.64
40.2
106.4
5.45
5.6
1250
38.1
28.7
0.75
2.52
46.7
15.1
4.5
1050
49.0
2.73
39.7
113.2
5.26
6.2
1050
37.2
26.1
0.70
2.42
45.4
15.4
3.9
1250
50.7
2.66
41.6
107.5
5.58
5.8
1250
38.6
28.9
0.75
2.47
47.0
15.6
4.3
1050
35.4
25.6
0.72
2.74
44.8
12.9
5.1
1250
36.6
28.4
0.78
2.78
46.1
13.1
5.5
1050
35.8
25.6
0.71
2.69
45.0
13.3
4.8
1250
37.0
28.3
0.76
2.74
46.3
13.5
5.3
Operation not recommended
Operation not recommended
Operation not recommended
6.0
5.0
9.0
1050
6.2
5.0
9.0
120
3.2
5.0
9.0
110
7.6
1.2
5.0
70
3.3
5.0
9.0
60
7.9
5.0
9.0
50
3.4
Operation not recommended
1050
32.4
24.1
0.74
2.99
42.6
10.8
6.2
1250
33.3
26.7
0.80
3.01
43.6
11.0
6.8
1050
32.7
23.7
0.73
2.94
42.8
11.1
5.8
1250
33.6
26.2
0.78
2.97
43.8
11.3
6.4
Operation not recommended
5.8
1050
30.5
23.6
0.77
3.34
41.9
9.1
7.5
1250
31.2
26.2
0.84
3.34
42.6
9.3
8.1
1050
30.8
23.0
0.75
3.29
42.0
9.4
7.0
1250
31.5
25.3
0.81
3.30
42.7
9.5
7.7
WaterFurnace works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice. Please contact WaterFurnace at 1-800-478-5667 for latest design and
specifications. Purchaser’s approval of this data set signifies that the equipment is acceptable under the provisions of the job specification. Statements and other information contained herein are not express warranties and do not form the
basis of any bargain between the parties, but are merely WaterFurnace’s opinion or commendation of its products. The latest version of this document is available at www.waterfurnace.com.
SD1585
10/08
35
Page _____ of _____
Contractor:
Engineer:
ENVISION Residential Series
2-6 Tons 60Hz
P.O.:
Project Name:
Unit Tag:
ND049
ND049 - Dual Capacity - ECM
low speed
Low
(1350 CFM)
1350 Speed
Rated CFM Heating
1350 Rated CFM Cooling
Performance capacities shown in thousands of Btuh.
HEATING - EAT 70°F
Flow
Water
EWT
Rate
Pressure Drop
ºF
GPM
PSI
FT/HD
20
8.0
2.0
4.6
11.0
3.4
7.8
COOLING - EAT 80/67 °F
Airflow
HC
Power
HE
LAT
CFM
kBtuh
kW
kBtuh
ºF
COP
HWC
Airflow
TC
SC
S/T
Power
HR
kBtuh
CFM
kBtuh
kBtuh
Ratio
kW
kBtuh
HWC
EER
kBtuh
Operation not recommended
30
5.0
0.9
2.1
8.0
1.9
4.4
11.0
40
0.9
2.0
8.0
1.9
4.3
2.0
8.0
1.8
4.2
8.0
11.0
5.0
8.0
11.0
5.0
80
8.0
11.0
5.0
90
8.0
11.0
100
0.8
1.8
3.0
0.8
1.7
2.9
0.8
1.6
2.8
0.7
1.6
2.7
7.2
1.9
4.0
6.9
1.8
3.9
6.7
1.8
3.8
6.5
1.7
3.6
6.2
0.7
1.7
8.0
1.5
3.5
2.6
0.7
1.6
8.0
1.5
3.4
2.5
0.7
1.5
8.0
1.4
3.3
2.4
22.5
2.05
15.5
88.1
3.22
4.2
23.3
2.08
16.2
86.0
3.29
3.8
Operation not recommended
Operation not recommended
1150
25.9
2.09
18.8
90.9
3.64
4.3
1150
36.1
21.1
0.59
1.19
40.1
30.2
---
1350
26.7
2.10
19.6
88.3
3.72
3.9
1350
37.3
24.9
0.67
1.27
41.7
29.5
---
1150
26.6
2.10
19.4
91.4
3.70
4.4
1150
36.1
21.1
0.58
1.11
39.9
32.5
---
1350
27.5
2.13
20.3
88.9
3.78
4.0
1350
37.1
24.9
0.67
1.18
41.1
31.4
---
1150
29.8
2.16
22.4
94.0
4.03
4.5
1150
38.1
23.1
0.61
1.31
42.6
29.0
---
1350
30.8
2.16
23.4
91.1
4.17
4.2
1350
39.4
27.2
0.69
1.39
44.1
28.4
---
1150
30.8
2.18
23.3
94.8
4.14
4.7
1150
38.3
23.1
0.60
1.23
42.5
31.0
---
1350
31.8
2.19
24.3
91.8
4.25
4.2
1350
39.4
27.2
0.69
1.30
43.8
30.3
---
1150
30.8
2.16
23.5
94.8
4.19
4.8
1150
38.9
24.7
0.64
1.70
44.6
22.9
1.6
1350
31.8
2.16
24.5
91.8
4.32
4.4
1350
40.1
29.1
0.73
1.77
46.1
22.7
1.7
1150
33.2
2.23
25.6
96.8
4.37
4.9
1150
39.7
24.8
0.62
1.47
44.7
27.0
1.5
1350
34.5
2.21
27.0
93.7
4.57
4.5
1350
40.9
29.2
0.71
1.54
46.2
26.6
1.6
1150
34.5
2.24
26.9
97.8
4.51
5.1
1150
39.9
24.8
0.62
1.38
44.7
28.9
1.4
1350
35.7
2.24
28.0
94.5
4.66
4.6
1350
41.2
29.2
0.71
1.45
46.1
28.3
1.5
1150
33.7
2.24
26.1
97.1
4.41
5.2
1150
38.7
24.6
0.64
1.83
44.9
21.2
2.3
1350
34.9
2.23
27.3
94.0
4.60
4.8
1350
39.9
29.0
0.73
1.91
46.4
20.9
2.4
1150
36.5
2.30
28.6
99.4
4.65
5.4
1150
39.3
24.8
0.63
1.62
44.8
24.2
2.1
1350
37.9
2.27
30.1
96.0
4.89
5.0
1350
40.5
29.2
0.72
1.70
46.3
23.9
2.3
1150
38.0
2.32
30.1
100.6
4.81
5.5
1150
39.8
24.9
0.63
1.54
45.0
25.8
1.9
1350
39.4
2.29
31.6
97.0
5.04
5.1
1350
41.0
29.3
0.72
1.61
46.4
25.5
2.2
Operation not recommended
Operation not recommended
1150
36.4
2.32
28.5
99.3
4.61
5.8
1150
38.9
25.9
0.67
2.01
45.7
19.3
3.2
1350
37.9
2.29
30.0
96.0
4.84
5.4
1350
40.1
30.5
0.76
2.11
47.3
19.0
3.4
1150
39.6
2.36
31.5
101.8
4.91
6.0
1150
39.3
26.2
0.67
1.82
45.5
21.5
3.0
1350
41.1
2.32
33.2
98.2
5.19
5.5
1350
40.5
30.7
0.76
1.90
47.0
21.3
3.2
1150
41.4
2.39
33.2
103.3
5.08
6.1
1150
40.0
26.3
0.66
1.74
45.9
22.9
2.8
1350
42.9
2.33
35.0
99.4
5.39
5.7
1350
41.2
30.9
0.75
1.81
47.4
22.8
3.1
1150
38.7
2.38
30.6
101.2
4.77
6.5
1150
37.6
24.8
0.66
2.20
45.1
17.1
4.4
1350
40.2
2.34
32.2
97.6
5.05
6.0
1350
38.8
29.2
0.75
2.29
46.7
17.0
4.6
1150
42.0
2.40
33.8
103.8
5.13
6.7
1150
37.9
25.1
0.66
2.04
44.8
18.6
4.1
1350
43.7
2.34
35.7
100.0
5.47
6.1
1350
39.0
29.5
0.76
2.12
46.2
18.4
4.4
1150
44.2
2.43
35.9
105.6
5.33
6.9
1150
38.7
25.3
0.65
1.95
45.4
19.8
3.8
1350
45.9
2.36
37.9
101.5
5.70
6.3
1350
39.9
29.7
0.74
2.03
46.8
19.6
4.2
1150
40.8
2.43
32.5
102.9
4.93
7.2
1150
35.5
22.8
0.64
2.40
43.7
14.8
5.9
1350
42.4
2.38
34.3
99.1
5.23
6.7
1350
36.6
26.8
0.73
2.50
45.2
14.7
6.2
1150
44.4
2.44
36.1
105.7
5.33
7.4
1150
35.5
23.1
0.65
2.28
43.3
15.6
5.5
1350
46.2
2.36
38.2
101.7
5.73
6.9
1350
36.5
27.2
0.75
2.36
44.5
15.5
5.9
1150
46.8
2.47
38.4
107.7
5.56
7.7
1150
36.5
23.4
0.64
2.18
43.9
16.7
5.1
1350
48.8
2.39
40.6
103.5
5.99
7.1
1350
37.6
27.5
0.73
2.28
45.4
16.5
5.6
Operation not recommended
1150
33.9
23.8
0.70
2.56
42.6
13.2
7.1
1350
34.9
28.0
0.80
2.66
44.0
13.1
7.7
1150
35.1
24.2
0.69
2.47
43.5
14.2
6.6
1350
36.1
28.4
0.79
2.57
44.9
14.1
7.3
1150
30.4
22.4
0.74
2.85
40.1
10.7
9.0
1350
31.4
26.4
0.84
2.97
41.5
10.6
9.8
1150
31.8
22.8
0.72
2.76
41.2
11.5
8.4
1350
32.7
26.8
0.82
2.88
42.5
11.4
9.3
Operation not recommended
Operation not recommended
5.8
5.0
11.0
1150
1350
6.0
5.0
11.0
120
3.1
5.0
11.0
110
7.4
0.9
5.0
70
3.2
5.0
11.0
60
7.6
5.0
11.0
50
3.3
Operation not recommended
Operation not recommended
5.6
1150
28.0
21.8
0.78
3.18
38.9
8.8
11.2
1350
29.0
25.6
0.89
3.32
40.3
8.7
12.1
1150
29.6
22.2
0.75
3.09
40.2
9.6
10.4
1350
30.4
26.1
0.86
3.24
41.4
9.4
11.5
WaterFurnace works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice. Please contact WaterFurnace at 1-800-478-5667 for latest design and
specifications. Purchaser’s approval of this data set signifies that the equipment is acceptable under the provisions of the job specification. Statements and other information contained herein are not express warranties and do not form the
basis of any bargain between the parties, but are merely WaterFurnace’s opinion or commendation of its products. The latest version of this document is available at www.waterfurnace.com.
SD1585
10/08
36
Page _____ of _____
Contractor:
Engineer:
ENVISION Residential Series
2-6 Tons 60Hz
P.O.:
Project Name:
Unit Tag:
ND049
ND049 - Dual Capacity - ECM
high speed
High
Speed
(1550 CFM)
1550 Rated
CFM Heating
1550 Rated CFM Cooling
Performance capacities shown in thousands of Btuh.
HEATING - EAT 70°F
Flow
Water
EWT
Rate
Pressure Drop
ºF
GPM
PSI
FT/HD
20
9.0
2.5
5.7
12.0
4.0
9.2
COOLING - EAT 80/67 °F
Airflow
HC
Power
HE
LAT
CFM
kBtuh
kW
kBtuh
ºF
COP
HWC
Airflow
TC
SC
S/T
Power
HR
kBtuh
CFM
kBtuh
kBtuh
Ratio
kW
kBtuh
HWC
EER
kBtuh
Operation not recommended
30
6.0
1.2
2.9
9.0
2.4
5.5
12.0
40
1.2
2.8
9.0
2.3
5.3
2.7
9.0
2.2
5.2
9.0
12.0
6.0
9.0
12.0
6.0
80
9.0
12.0
6.0
90
9.0
12.0
100
1.1
2.2
3.5
1.1
2.1
3.4
1.1
2.0
3.3
1.0
2.0
3.2
8.4
2.6
5.0
8.1
2.5
4.9
7.9
2.5
4.7
7.6
2.4
4.5
7.3
1.0
2.3
9.0
1.9
4.4
3.1
1.0
2.2
9.0
1.8
4.2
2.9
0.9
2.1
9.0
1.7
4.0
2.8
31.3
2.72
22.1
91.5
3.38
5.3
1550
32.4
2.80
22.8
89.3
3.38
4.8
Operation not recommended
Operation not recommended
1350
35.8
2.85
26.1
94.5
3.68
5.6
1350
47.7
29.4
0.62
1.90
54.2
25.1
---
1550
36.9
2.94
26.8
92.0
3.68
5.2
1550
50.6
32.7
0.65
2.02
57.5
25.0
---
1350
36.3
2.88
26.5
94.9
3.70
5.8
1350
48.2
29.4
0.61
1.81
54.4
26.7
---
1550
37.5
2.97
27.4
92.4
3.71
5.3
1550
51.0
32.6
0.64
1.93
57.6
26.4
---
1350
40.8
2.97
30.6
98.0
4.02
6.2
1350
49.5
31.1
0.63
2.10
56.7
23.6
---
1550
42.0
3.04
31.6
95.1
4.04
5.7
1550
52.3
34.6
0.66
2.22
59.9
23.5
---
1350
41.5
3.01
31.2
98.5
4.04
6.4
1350
50.0
31.1
0.62
2.01
56.9
24.9
---
1550
42.9
3.07
32.4
95.6
4.09
5.8
1550
52.8
34.6
0.66
2.13
60.0
24.8
---
1350
43.6
3.08
33.1
99.9
4.15
6.7
1350
50.1
31.9
0.64
2.50
58.6
20.0
3.0
1550
45.0
3.12
34.4
96.9
4.23
6.2
1550
52.7
35.4
0.67
2.64
61.7
20.0
3.2
1350
45.3
3.14
34.6
101.1
4.23
6.9
1350
50.7
32.4
0.64
2.35
58.7
21.6
2.8
1550
46.6
3.19
35.8
97.9
4.29
6.4
1550
53.4
36.0
0.67
2.47
61.8
21.7
3.0
1350
46.2
3.18
35.4
101.7
4.27
7.2
1350
51.2
32.5
0.63
2.26
58.9
22.7
2.6
1550
47.8
3.22
36.8
98.5
4.35
6.5
1550
53.8
36.1
0.67
2.38
62.0
22.7
2.9
1350
47.6
3.21
36.7
102.7
4.35
7.6
1350
49.5
32.2
0.65
2.66
58.6
18.6
3.7
1550
49.1
3.22
38.1
99.3
4.47
7.0
1550
51.9
35.8
0.69
2.78
61.4
18.7
3.9
1350
49.8
3.29
38.6
104.1
4.44
7.8
1350
50.3
32.7
0.65
2.51
58.9
20.0
3.4
1550
51.3
3.30
40.0
100.6
4.55
7.2
1550
52.8
36.3
0.69
2.62
61.7
20.1
3.7
1350
50.9
3.33
39.6
104.9
4.49
8.0
1350
50.9
32.8
0.65
2.43
59.2
20.9
3.2
1550
52.6
3.34
41.2
101.4
4.62
7.4
1550
53.3
36.5
0.68
2.54
62.0
21.0
3.5
1350
51.5
3.32
40.2
105.4
4.55
8.5
1350
49.2
32.8
0.67
2.91
59.1
16.9
4.6
1550
53.1
3.31
41.8
101.7
4.70
7.9
1550
51.4
36.5
0.71
3.02
61.7
17.0
4.9
1350
54.1
3.42
42.4
107.1
4.63
8.8
1350
50.3
33.3
0.66
2.77
59.8
18.2
4.3
1550
55.8
3.41
44.1
103.3
4.79
8.1
1550
52.5
36.9
0.70
2.87
62.3
18.3
4.6
1350
55.5
3.47
43.7
108.1
4.69
9.0
1350
50.8
33.5
0.66
2.69
60.0
18.9
4.0
1550
57.3
3.45
45.5
104.2
4.87
8.3
1550
53.1
37.2
0.70
2.80
62.7
19.0
4.4
1350
54.7
3.49
42.7
107.5
4.58
9.6
1350
47.2
32.1
0.68
3.15
57.9
15.0
5.8
1550
56.4
3.45
44.7
103.7
4.79
8.8
1550
49.1
35.6
0.73
3.24
60.2
15.1
6.2
1350
57.7
3.62
45.4
109.6
4.67
9.8
1350
48.4
32.5
0.67
3.03
58.7
16.0
5.4
1550
59.6
3.58
47.4
105.6
4.88
9.1
1550
50.4
36.0
0.71
3.12
61.0
16.2
5.9
1350
59.4
3.66
46.9
110.7
4.75
10.1
1350
48.9
32.7
0.67
2.96
59.0
16.5
5.0
1550
61.3
3.62
49.0
106.6
4.97
9.4
1550
50.9
36.3
0.71
3.05
61.3
16.7
5.6
1350
57.7
3.66
45.2
109.6
4.62
10.7
1350
44.3
30.8
0.70
3.39
55.9
13.1
7.3
1550
59.7
3.58
47.4
105.6
4.88
9.9
1550
46.0
34.2
0.74
3.46
57.8
13.3
7.7
1350
61.3
3.81
48.3
112.0
4.71
11.1
1350
45.7
31.1
0.68
3.29
56.9
13.9
6.8
1550
63.3
3.73
50.6
107.8
4.98
10.2
1550
47.4
34.5
0.73
3.36
58.8
14.1
7.4
1350
63.1
3.85
50.0
113.3
4.81
11.4
1350
46.2
31.4
0.68
3.22
57.2
14.3
6.3
1550
65.3
3.78
52.4
109.0
5.07
10.6
1550
47.8
34.9
0.73
3.29
59.0
14.5
7.0
Operation not recommended
Operation not recommended
Operation not recommended
1350
43.6
30.5
0.70
3.66
56.0
11.9
8.4
1550
45.0
33.7
0.75
3.71
57.7
12.2
9.2
1350
44.0
30.8
0.70
3.60
56.3
12.2
7.8
1550
45.4
34.2
0.75
3.65
57.9
12.5
8.7
Operation not recommended
Operation not recommended
6.8
6.0
12.0
1350
7.1
6.0
12.0
120
3.6
6.0
12.0
110
8.7
1.2
6.0
70
3.7
6.0
12.0
60
8.9
6.0
12.0
50
3.9
Operation not recommended
1350
39.4
28.4
0.72
3.97
52.9
9.9
10.3
1550
40.5
31.4
0.78
4.00
54.1
10.1
11.2
1350
39.8
28.8
0.72
3.92
53.2
10.1
9.6
1550
40.9
31.9
0.78
3.95
54.4
10.3
10.7
1350
36.5
27.2
0.74
4.42
51.6
8.3
12.5
1550
37.4
30.1
0.80
4.42
52.5
8.5
13.5
1350
36.9
27.7
0.75
4.38
51.9
8.4
11.6
1550
37.8
30.6
0.81
4.38
52.7
8.6
12.9
Operation not recommended
6.5
WaterFurnace works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice. Please contact WaterFurnace at 1-800-478-5667 for latest design and
specifications. Purchaser’s approval of this data set signifies that the equipment is acceptable under the provisions of the job specification. Statements and other information contained herein are not express warranties and do not form the
basis of any bargain between the parties, but are merely WaterFurnace’s opinion or commendation of its products. The latest version of this document is available at www.waterfurnace.com.
SD1585
10/08
37
Page _____ of _____
Contractor:
Engineer:
ENVISION Residential Series
2-6 Tons 60Hz
P.O.:
Project Name:
Unit Tag:
ND064
low speed
ND064
- Dual Capacity - ECM
Low
(1500 CFM)
1500 Speed
Rated CFM Heating
1500 Rated CFM Cooling
Performance capacities shown in thousands of Btuh.
HEATING - EAT 70°F
Flow
Water
EWT
Rate
Pressure Drop
ºF
GPM
PSI
FT/HD
20
10.0
2.7
6.2
14.0
5.1
11.8
COOLING - EAT 80/67 °F
Airflow
HC
Power
HE
LAT
CFM
kBtuh
kW
kBtuh
ºF
COP
HWC
Airflow
TC
SC
S/T
Power
HR
kBtuh
CFM
kBtuh
kBtuh
Ratio
kW
kBtuh
HWC
EER
kBtuh
Operation not recommended
30
6.0
1.0
2.3
10.0
2.6
6.0
14.0
40
1.0
2.3
10.0
2.5
5.9
6.0
60
70
10.0
0.9
2.1
10.0
2.4
5.5
1250
26.2
2.55
17.5
89.4
3.01
4.9
1500
27.1
2.59
18.3
86.7
3.07
4.5
Operation not recommended
Operation not recommended
1250
30.4
2.63
21.4
92.5
3.39
5.0
1250
51.7
30.4
0.59
1.43
56.5
36.0
1.3
1500
31.5
2.67
22.4
89.4
3.46
4.6
1500
53.2
34.6
0.65
1.50
58.3
35.5
1.4
1250
31.5
2.63
22.5
93.3
3.51
5.1
1250
51.8
30.3
0.59
1.40
56.6
37.0
1.2
1500
32.6
2.67
23.5
90.1
3.58
4.7
1500
53.1
34.5
0.65
1.48
58.1
36.0
1.3
Operation not recommended
Operation not recommended
1250
35.9
2.72
26.6
96.6
3.86
5.3
1250
53.2
31.1
0.59
1.57
58.5
33.8
1.4
1500
36.9
2.73
27.6
92.8
3.96
4.9
1500
54.8
35.4
0.65
1.65
60.4
33.2
1.6
1250
37.1
2.73
27.7
97.5
3.98
5.5
1250
53.3
31.1
0.58
1.54
58.6
34.7
1.3
1500
38.1
2.74
28.7
93.5
4.07
5.0
1500
54.8
35.3
0.65
1.62
60.3
33.8
1.5
1250
40.4
2.76
31.0
99.9
4.28
5.6
1250
54.5
31.5
0.58
1.82
60.7
29.9
2.0
1500
41.5
2.76
32.1
95.6
4.40
5.2
1500
56.1
35.8
0.64
1.92
62.6
29.1
2.1
1250
41.0
2.82
31.4
100.4
4.27
5.7
1250
54.6
31.8
0.58
1.76
60.6
31.1
1.9
1500
42.0
2.80
32.4
95.9
4.39
5.3
1500
56.2
36.1
0.64
1.84
62.5
30.5
2.0
1250
42.3
2.83
32.6
101.3
4.37
5.9
1250
54.7
31.8
0.58
1.72
60.6
31.8
1.7
1500
43.2
2.82
33.6
96.7
4.50
5.4
1500
56.3
36.1
0.64
1.81
62.5
31.2
1.9
1250
45.0
2.86
35.2
103.3
4.61
6.1
1250
52.5
30.9
0.59
2.04
59.4
25.8
2.8
1500
45.9
2.83
36.3
98.3
4.75
5.7
1500
54.1
34.8
0.64
2.13
61.4
25.4
3.0
1250
46.4
2.91
36.4
104.3
4.67
6.3
1250
52.7
31.1
0.59
1.97
59.5
26.8
2.6
1500
47.1
2.87
37.3
99.1
4.82
5.8
1500
54.3
35.2
0.65
2.06
61.3
26.4
2.9
47.5
2.93
37.5
105.2
4.74
6.5
1250
53.0
31.2
0.59
1.93
59.5
27.4
2.5
14.0
4.5
10.4
1250
1500
48.2
2.89
38.3
99.8
4.89
6.0
1500
54.5
35.2
0.65
2.02
61.4
27.0
2.7
6.0
0.9
2.0
1250
49.4
2.95
39.3
106.6
4.91
6.8
1250
51.6
31.2
0.61
2.30
59.4
22.4
4.0
1500
50.2
2.90
40.4
101.0
5.08
6.3
1500
53.2
35.0
0.66
2.40
61.4
22.2
4.2
1250
51.5
3.00
41.3
108.1
5.04
7.0
1250
51.9
31.5
0.61
2.23
59.5
23.2
3.7
1500
52.1
2.93
42.1
102.1
5.21
6.5
1500
53.5
35.4
0.66
2.33
61.5
23.0
4.0
1250
52.5
3.03
42.1
108.9
5.08
7.2
1250
52.2
31.6
0.61
2.19
59.7
23.9
3.5
1500
53.0
2.96
42.9
102.7
5.25
6.6
1500
53.8
35.6
0.66
2.28
61.6
23.6
3.9
1250
53.6
3.04
43.2
109.7
5.17
7.6
1250
49.3
30.1
0.61
2.60
58.2
19.0
5.5
1500
54.1
2.97
43.9
103.4
5.33
7.0
1500
50.8
33.6
0.66
2.69
60.0
18.9
5.9
1250
56.6
3.09
46.1
111.9
5.37
7.8
1250
49.8
30.4
0.61
2.53
58.4
19.6
5.2
1500
56.9
3.00
46.6
105.1
5.56
7.2
1500
51.3
34.1
0.66
2.63
60.2
19.5
5.6
1250
57.3
3.13
46.6
112.4
5.37
8.0
1250
50.1
30.6
0.61
2.49
58.6
20.1
4.8
1500
57.5
3.04
47.1
105.5
5.55
7.4
1500
51.7
34.3
0.66
2.58
60.5
20.0
5.3
1250
57.6
3.13
46.9
112.7
5.40
8.5
1250
45.7
28.6
0.63
2.94
55.7
15.6
7.4
1500
57.7
3.04
47.4
105.6
5.56
7.8
1500
47.1
31.8
0.67
3.02
57.4
15.6
7.8
1250
61.5
3.18
50.7
115.5
5.67
8.7
1250
46.2
28.9
0.62
2.87
56.0
16.1
6.9
1500
61.5
3.06
51.0
108.0
5.89
8.1
1500
47.6
32.2
0.68
2.97
57.7
16.0
7.5
1250
61.9
3.23
50.9
115.8
5.62
9.0
1250
46.6
29.1
0.63
2.84
56.2
16.4
6.4
1500
61.8
3.11
51.1
108.1
5.82
8.3
1500
48.1
32.4
0.67
2.92
58.0
16.5
7.1
10.0
10.0
10.0
14.0
2.3
4.4
0.9
2.2
4.2
0.8
2.1
4.1
5.3
10.1
2.0
5.1
9.8
1.9
5.0
9.4
6.0
0.8
1.8
10.0
2.1
4.8
14.0
3.9
0.8
1.8
10.0
2.0
4.6
3.8
0.7
1.7
10.0
1.9
4.4
3.6
1250
44.3
29.0
0.65
3.28
55.5
13.5
9.0
1500
45.6
32.0
0.70
3.36
57.1
13.6
9.7
1250
44.7
29.3
0.66
3.23
55.8
13.8
8.3
1500
46.2
32.4
0.70
3.31
57.5
13.9
9.2
1250
39.9
27.3
0.69
3.71
52.6
10.7
11.3
1500
41.1
30.0
0.73
3.79
54.1
10.9
12.3
1250
40.4
27.8
0.69
3.66
52.9
11.0
10.5
1500
41.7
30.5
0.73
3.73
54.4
11.2
11.7
Operation not recommended
Operation not recommended
8.7
6.0
14.0
Operation not recommended
9.1
6.0
14.0
120
5.7
6.0
6.0
110
2.5
2.2
10.8
14.0
100
0.9
11.1
4.7
6.0
90
4.8
14.0
14.0
80
11.5
6.0
14.0
50
5.0
Operation not recommended
Operation not recommended
8.4
1250
37.3
27.5
0.74
4.21
51.6
8.9
14.0
1500
38.4
29.9
0.78
4.26
53.0
9.0
15.2
1250
37.9
28.0
0.74
4.16
52.0
9.1
13.0
1500
39.0
30.5
0.78
4.21
53.4
9.3
14.5
WaterFurnace works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice. Please contact WaterFurnace at 1-800-478-5667 for latest design and
specifications. Purchaser’s approval of this data set signifies that the equipment is acceptable under the provisions of the job specification. Statements and other information contained herein are not express warranties and do not form the
basis of any bargain between the parties, but are merely WaterFurnace’s opinion or commendation of its products. The latest version of this document is available at www.waterfurnace.com.
SD1585
10/08
38
Page _____ of _____
Contractor:
Engineer:
ENVISION Residential Series
2-6 Tons 60Hz
P.O.:
Project Name:
Unit Tag:
ND064
high speed
ND064
- Dual Capacity - ECM
High
Speed
(1800 CFM)
1800 Rated
CFM Heating
1800 Rated CFM Cooling
Performance capacities shown in thousands of Btuh.
HEATING - EAT 70°F
Flow
Water
EWT
Rate
Pressure Drop
ºF
GPM
PSI
FT/HD
20
12.0
3.8
8.8
16.0
6.5
15.1
COOLING - EAT 80/67 °F
Airflow
HC
Power
HE
LAT
CFM
kBtuh
kW
kBtuh
ºF
COP
HWC
Airflow
TC
SC
S/T
Power
HR
kBtuh
CFM
kBtuh
kBtuh
Ratio
kW
kBtuh
HWC
EER
kBtuh
Operation not recommended
30
8.0
1.8
4.1
12.0
3.7
8.6
16.0
40
60
1.7
4.0
12.0
3.6
8.3
3.8
12.0
3.5
8.1
16.0
6.0
13.8
8.0
1.6
3.7
12.0
12.0
16.0
8.0
12.0
16.0
8.0
90
100
12.0
5.8
1.6
3.3
5.6
1.5
3.2
5.4
1.4
3.0
7.8
13.4
3.6
7.5
12.9
3.5
7.3
12.5
3.3
7.0
5.2
12.0
8.0
1.4
3.2
12.0
2.9
6.8
5.0
1.3
3.1
12.0
2.8
6.5
4.8
1.3
3.0
12.0
2.7
6.3
4.6
39.3
3.48
27.5
94.3
3.31
6.2
1800
40.3
3.64
27.9
90.7
3.24
5.6
Operation not recommended
Operation not recommended
1500
45.4
3.49
33.4
98.0
3.81
6.5
1500
67.1
42.9
0.64
2.35
75.1
28.6
---
1800
46.6
3.72
33.9
94.0
3.68
6.0
1800
67.7
46.7
0.69
2.49
76.2
27.2
---
1500
46.0
3.58
33.8
98.4
3.76
6.7
1500
67.8
43.3
0.64
2.31
75.6
29.4
---
1800
47.1
3.75
34.3
94.2
3.68
6.1
1800
68.2
47.1
0.69
2.45
76.6
27.9
---
Operation not recommended
Operation not recommended
1500
52.2
3.72
39.5
102.2
4.11
7.2
1500
69.7
44.1
0.63
2.70
78.9
25.8
---
1800
53.4
3.88
40.1
97.5
4.03
6.6
1800
70.7
48.0
0.68
2.86
80.5
24.7
---
1500
53.0
3.79
40.1
102.7
4.10
7.4
1500
70.4
44.5
0.63
2.65
79.5
26.6
---
1800
54.2
3.92
40.8
97.9
4.05
6.7
1800
71.4
48.4
0.68
2.82
81.0
25.3
---
1500
55.7
3.88
42.4
104.4
4.21
7.8
1500
70.8
44.4
0.63
3.15
81.6
22.5
4.0
1800
56.8
4.00
43.2
99.2
4.17
7.2
1800
72.3
48.3
0.67
3.35
83.7
21.6
4.2
1500
58.9
3.95
45.4
106.3
4.37
8.0
1500
71.6
44.8
0.63
3.09
82.1
23.2
3.7
1800
60.1
4.05
46.2
100.9
4.35
7.4
1800
73.0
48.8
0.67
3.28
84.2
22.3
4.0
1500
59.8
4.00
46.2
106.9
4.39
8.2
1500
72.3
45.3
0.63
3.03
82.6
23.8
3.4
1800
61.1
4.09
47.2
101.5
4.38
7.5
1800
73.7
49.2
0.67
3.23
84.7
22.9
3.8
1500
62.4
4.14
48.3
108.5
4.42
8.7
1500
69.2
44.0
0.64
3.40
80.8
20.4
4.8
1800
63.8
4.21
49.4
102.8
4.44
8.0
1800
71.0
47.8
0.67
3.62
83.3
19.6
5.1
1500
65.3
4.21
50.9
110.3
4.54
9.0
1500
69.9
44.4
0.64
3.33
81.3
21.0
4.5
1800
66.7
4.26
52.2
104.3
4.58
8.3
1800
71.7
48.3
0.67
3.54
83.8
20.2
4.9
1500
66.7
4.26
52.2
111.2
4.59
9.2
1500
70.6
44.9
0.64
3.28
81.8
21.5
4.2
1800
68.2
4.31
53.5
105.1
4.64
8.5
1800
72.4
48.8
0.67
3.48
84.3
20.8
4.6
1500
69.3
4.44
54.1
112.8
4.58
9.8
1500
69.8
44.4
0.64
3.78
82.7
18.5
6.1
1800
70.8
4.46
55.6
106.4
4.65
9.0
1800
72.0
48.2
0.67
4.03
85.7
17.9
6.4
1500
71.8
4.50
56.4
114.3
4.68
10.1
1500
70.5
44.8
0.64
3.71
83.1
19.0
5.7
1800
73.4
4.51
58.0
107.8
4.77
9.3
1800
72.8
48.7
0.67
3.94
86.2
18.5
6.1
1500
73.6
4.55
58.1
115.5
4.74
10.4
1500
71.2
45.3
0.64
3.64
83.6
19.5
5.3
1800
75.4
4.55
59.8
108.8
4.85
9.6
1800
73.4
49.2
0.67
3.88
86.7
18.9
5.8
1500
76.1
4.73
60.0
117.0
4.72
11.0
1500
65.7
42.9
0.65
4.10
79.7
16.0
7.7
1800
77.9
4.70
61.8
110.1
4.86
10.2
1800
68.2
46.6
0.68
4.37
83.1
15.6
8.1
1500
77.9
4.78
61.6
118.1
4.77
11.3
1500
66.4
43.3
0.65
4.02
80.2
16.5
7.1
1800
79.8
4.74
63.6
111.0
4.94
10.5
1800
68.9
47.0
0.68
4.28
83.5
16.1
7.7
1500
80.3
4.84
63.7
119.5
4.86
11.7
1500
67.1
43.8
0.65
3.95
80.6
17.0
6.6
1800
82.3
4.78
66.0
112.3
5.04
10.8
1800
69.6
47.5
0.68
4.21
83.9
16.5
7.4
1500
83.0
5.05
65.8
121.2
4.82
12.4
1500
60.5
41.3
0.68
4.40
75.5
13.8
9.6
1800
85.0
4.97
68.0
113.7
5.01
11.4
1800
63.2
44.9
0.71
4.68
79.1
13.5
10.2
1500
84.1
5.10
66.7
121.9
4.83
12.7
1500
61.2
41.7
0.68
4.31
75.9
14.2
9.0
1800
86.2
5.00
69.1
114.3
5.06
11.8
1800
63.7
45.3
0.71
4.59
79.4
13.9
9.7
1500
87.0
5.17
69.4
123.7
4.93
13.1
1500
61.8
42.2
0.68
4.24
76.2
14.6
8.3
1800
89.3
5.05
72.0
115.9
5.18
12.2
1800
64.4
45.8
0.71
4.51
79.8
14.3
9.2
1500
59.5
40.6
0.68
4.76
75.7
12.5
11.1
1800
62.3
44.2
0.71
5.07
79.6
12.3
12.1
1500
60.0
41.1
0.68
4.68
76.0
12.8
10.3
1800
62.9
44.6
0.71
4.99
79.9
12.6
11.5
Operation not recommended
Operation not recommended
Operation not recommended
11.2
8.0
16.0
1500
11.6
8.0
16.0
120
3.4
16.0
16.0
110
14.2
1.7
8.0
80
6.2
8.0
16.0
70
14.7
8.0
16.0
50
6.4
Operation not recommended
1500
52.6
37.1
0.71
5.09
69.9
10.3
13.6
1800
55.4
40.3
0.73
5.43
73.9
10.2
14.8
1500
53.1
37.5
0.71
5.00
70.1
10.6
12.7
1800
55.9
40.8
0.73
5.34
74.1
10.5
14.1
16.5
Operation not recommended
10.7
1500
51.2
37.8
0.74
5.62
70.3
9.1
1800
54.2
41.1
0.76
6.00
74.6
9.0
17.9
1500
51.6
38.2
0.74
5.52
70.5
9.4
15.3
1800
54.6
41.5
0.76
5.90
74.7
9.3
17.0
WaterFurnace works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice. Please contact WaterFurnace at 1-800-478-5667 for latest design and
specifications. Purchaser’s approval of this data set signifies that the equipment is acceptable under the provisions of the job specification. Statements and other information contained herein are not express warranties and do not form the
basis of any bargain between the parties, but are merely WaterFurnace’s opinion or commendation of its products. The latest version of this document is available at www.waterfurnace.com.
SD1585
10/08
39
Page _____ of _____
Contractor:
Engineer:
ENVISION Residential Series
2-6 Tons 60Hz
P.O.:
Project Name:
Unit Tag:
ND072
low speed
ND072
- Dual Capacity - ECM
Low
(1700 CFM)
1700 Speed
Rated CFM Heating
1700 Rated CFM Cooling
Performance capacities shown in thousands of Btuh.
HEATING - EAT 70°F
Flow
Water
EWT
Rate
Pressure Drop
ºF
GPM
PSI
FT/HD
20
13.0
3.6
8.2
16.0
5.0
11.6
COOLING - EAT 80/67 °F
Airflow
HC
Power
HE
LAT
CFM
kBtuh
kW
kBtuh
ºF
COP
HWC
Airflow
TC
SC
S/T
Power
HR
kBtuh
CFM
kBtuh
kBtuh
Ratio
kW
kBtuh
HWC
EER
kBtuh
Operation not recommended
30
10.0
2.3
5.3
13.0
3.5
8.0
16.0
40
2.2
5.1
13.0
3.4
7.8
4.9
13.0
3.3
7.5
13.0
16.0
10.0
13.0
16.0
10.0
80
13.0
16.0
10.0
90
13.0
16.0
100
2.1
3.2
4.4
2.0
3.0
4.3
1.9
2.9
4.2
1.9
2.8
4.0
10.6
4.8
7.3
10.3
4.6
7.0
9.9
4.5
6.8
9.6
4.3
6.6
9.3
1.8
4.2
13.0
2.7
6.3
3.9
1.7
4.0
13.0
2.6
6.1
10.0
13.0
16.0
3.7
1.7
2.5
3.6
1400
32.4
3.36
21.0
91.4
2.83
6.0
1700
34.0
3.40
22.4
88.5
2.93
5.4
Operation not recommended
Operation not recommended
1400
36.2
3.38
24.7
93.9
3.14
6.1
1400
55.1
33.7
0.61
1.82
61.3
30.3
---
1700
38.0
3.42
26.3
90.7
3.25
5.6
1700
57.0
38.7
0.68
1.94
63.6
29.4
---
1400
37.8
3.38
26.2
95.0
3.28
6.3
1400
55.2
33.6
0.61
1.75
61.2
31.6
---
1700
39.6
3.42
27.9
91.6
3.39
5.7
1700
56.8
38.6
0.68
1.88
63.2
30.2
---
Operation not recommended
Operation not recommended
1400
42.6
3.48
30.7
98.1
3.58
6.5
1400
57.7
35.7
0.62
2.00
64.5
28.9
---
1700
44.4
3.49
32.5
94.2
3.73
5.9
1700
59.5
40.8
0.68
2.12
66.7
28.1
---
1400
44.1
3.49
32.1
99.1
3.70
6.7
1400
57.8
35.6
0.62
1.93
64.4
29.9
---
1700
46.0
3.50
34.1
95.1
3.85
6.1
1700
59.5
40.7
0.68
2.06
66.5
28.9
---
1400
47.6
3.52
35.6
101.5
3.96
6.8
1400
59.7
37.3
0.62
2.30
67.6
25.9
2.3
1700
49.7
3.48
37.8
97.1
4.18
6.3
1700
61.6
42.2
0.69
2.42
69.8
25.4
2.4
1400
48.3
3.56
36.1
101.9
3.98
7.0
1400
59.9
37.6
0.63
2.22
67.5
26.9
2.1
1700
50.2
3.54
38.2
97.4
4.16
6.4
1700
61.7
42.7
0.69
2.34
69.7
26.4
2.3
1400
49.7
3.58
37.5
102.9
4.07
7.2
1400
60.0
37.6
0.63
2.16
67.4
27.7
2.0
1700
51.8
3.56
39.7
98.2
4.27
6.6
1700
61.9
42.7
0.69
2.28
69.6
27.1
2.2
1400
52.9
3.63
40.5
105.0
4.27
7.5
1400
58.0
36.8
0.63
2.53
66.6
22.9
3.2
1700
55.1
3.56
43.0
100.0
4.54
6.9
1700
59.7
41.5
0.70
2.64
68.7
22.6
3.4
1400
54.4
3.67
41.9
106.0
4.34
7.7
1400
58.2
37.1
0.64
2.45
66.6
23.8
3.0
1700
56.5
3.61
44.2
100.8
4.60
7.1
1700
60.0
42.0
0.70
2.56
68.7
23.4
3.2
1400
55.6
3.71
43.0
106.8
4.40
7.9
1400
58.5
37.2
0.64
2.40
66.7
24.4
2.8
1700
57.9
3.64
45.4
101.5
4.66
7.3
1700
60.3
42.1
0.70
2.50
68.8
24.1
3.1
1400
58.4
3.76
45.5
108.6
4.54
8.3
1400
57.6
37.3
0.65
2.83
67.2
20.4
4.5
1700
60.7
3.65
48.3
103.1
4.87
7.7
1700
59.2
42.0
0.71
2.94
69.3
20.2
4.8
1400
60.6
3.80
47.6
110.1
4.67
8.5
1400
57.9
37.8
0.65
2.74
67.3
21.2
4.2
1700
62.9
3.69
50.3
104.3
5.00
7.9
1700
59.6
42.5
0.71
2.85
69.3
20.9
4.5
1400
61.7
3.86
48.5
110.8
4.69
8.8
1400
58.2
38.0
0.65
2.70
67.5
21.6
3.9
1700
64.0
3.75
51.3
104.9
5.01
8.1
1700
60.1
42.7
0.71
2.79
69.6
21.5
4.3
1400
62.9
3.86
49.7
111.6
4.77
9.2
1400
54.9
36.5
0.66
3.15
65.7
17.4
6.2
1700
65.2
3.72
52.5
105.5
5.13
8.5
1700
56.6
40.8
0.72
3.24
67.7
17.5
6.6
1400
66.2
3.91
52.8
113.8
4.97
9.5
1400
55.4
36.9
0.67
3.07
65.9
18.0
5.8
1700
68.5
3.75
55.8
107.3
5.36
8.8
1700
57.0
41.3
0.72
3.16
67.8
18.0
6.3
1400
66.9
3.96
53.4
114.3
4.95
9.8
1400
55.8
37.1
0.67
3.02
66.1
18.5
5.4
1700
69.2
3.81
56.2
107.7
5.32
9.1
1700
57.5
41.5
0.72
3.11
68.1
18.5
6.0
1400
67.5
3.97
53.9
114.6
4.98
10.3
1400
50.7
34.7
0.68
3.50
62.7
14.5
8.3
1700
69.7
3.81
56.7
108.0
5.37
9.5
1700
52.3
38.5
0.74
3.57
64.5
14.6
8.8
1400
71.9
4.03
58.1
117.5
5.23
10.6
1400
51.2
35.0
0.68
3.43
62.9
14.9
7.7
1700
74.3
3.83
61.2
110.4
5.69
9.8
1700
52.8
39.0
0.74
3.50
64.8
15.1
8.4
1400
72.3
4.08
58.4
117.8
5.19
11.0
1400
51.8
35.3
0.68
3.37
63.3
15.3
7.2
1700
74.6
3.90
61.3
110.6
5.60
10.2
1700
53.4
39.3
0.74
3.45
65.1
15.5
8.0
Operation not recommended
8.9
10.0
16.0
120
4.6
10.0
16.0
110
11.0
2.1
10.0
70
4.7
10.0
16.0
60
11.3
10.0
16.0
50
4.9
Operation not recommended
1400
49.1
34.9
0.71
3.87
62.4
12.7
10.0
1700
50.7
38.7
0.76
3.92
64.1
12.9
10.9
1400
49.8
35.3
0.71
3.82
62.8
13.0
9.3
1700
51.3
39.1
0.76
3.86
64.5
13.3
10.4
1400
43.7
32.7
0.75
4.33
58.4
10.1
12.7
1700
45.2
36.1
0.80
4.35
60.0
10.4
13.8
1400
44.4
33.2
0.75
4.27
59.0
10.4
11.8
1700
45.7
36.6
0.80
4.29
60.4
10.7
13.1
Operation not recommended
Operation not recommended
8.6
3.8
Operation not recommended
5.8
8.2
1400
40.8
31.9
0.78
4.88
57.5
8.4
15.8
1700
42.3
34.9
0.83
4.86
58.9
8.7
17.1
1400
41.7
32.5
0.78
4.80
58.0
8.7
14.6
1700
42.8
35.5
0.83
4.79
59.2
8.9
16.3
WaterFurnace works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice. Please contact WaterFurnace at 1-800-478-5667 for latest design and
specifications. Purchaser’s approval of this data set signifies that the equipment is acceptable under the provisions of the job specification. Statements and other information contained herein are not express warranties and do not form the
basis of any bargain between the parties, but are merely WaterFurnace’s opinion or commendation of its products. The latest version of this document is available at www.waterfurnace.com.
SD1585
10/08
40
Page _____ of _____
Contractor:
Engineer:
ENVISION Residential Series
2-6 Tons 60Hz
P.O.:
Project Name:
Unit Tag:
ND072
ND072 - Dual Capacity - ECM
high speed
High
Speed
(2200 CFM)
2200 Rated
CFM Heating
2200 Rated CFM Cooling
Performance capacities shown in thousands of Btuh.
HEATING - EAT 70°F
Flow
Water
EWT
Rate
Pressure Drop
ºF
GPM
PSI
FT/HD
20
15.0
4.6
10.7
18.0
6.2
14.3
COOLING - EAT 80/67 °F
Airflow
HC
Power
HE
LAT
CFM
kBtuh
kW
kBtuh
ºF
COP
HWC
Airflow
TC
SC
S/T
Power
HR
kBtuh
CFM
kBtuh
kBtuh
Ratio
kW
kBtuh
HWC
EER
kBtuh
Operation not recommended
30
12.0
3.2
7.4
15.0
4.5
10.4
18.0
40
60
70
3.1
7.1
15.0
4.4
10.1
6.9
15.0
4.2
9.8
18.0
5.7
13.1
12.0
2.9
6.7
15.0
4.08
31.4
92.7
3.26
7.9
47.1
4.34
32.2
89.8
3.18
7.1
Operation not recommended
Operation not recommended
1850
52.6
4.24
38.1
96.3
3.64
8.3
1850
71.9
43.9
0.61
2.56
80.7
28.1
---
2200
54.5
4.51
39.1
92.9
3.54
7.6
2200
73.3
47.8
0.65
2.71
82.5
27.0
---
1850
53.0
4.28
38.4
96.5
3.63
8.6
1850
72.7
44.7
0.61
2.52
81.2
28.9
---
2200
55.0
4.55
39.5
93.1
3.54
7.8
2200
74.0
48.1
0.65
2.67
83.1
27.7
---
Operation not recommended
Operation not recommended
1850
61.0
4.50
45.6
100.5
3.97
9.2
1850
74.8
46.7
0.62
3.09
85.3
24.2
---
2200
63.1
4.71
47.0
96.5
3.92
8.4
2200
76.2
50.8
0.67
3.28
87.4
23.3
---
1850
61.9
4.55
46.3
101.0
3.98
9.5
1850
75.6
47.6
0.63
3.03
85.9
24.9
---
2200
64.0
4.76
47.8
96.9
3.94
8.6
2200
77.0
51.2
0.66
3.23
88.0
23.9
---
1850
64.9
4.69
48.9
102.5
4.06
9.9
1850
76.2
48.6
0.64
3.75
89.0
20.3
4.3
2200
67.1
4.86
50.5
98.2
4.05
9.2
2200
77.8
52.8
0.68
3.98
91.4
19.5
4.6
1850
68.6
4.78
52.3
104.3
4.21
10.3
1850
77.0
49.1
0.64
3.67
89.5
21.0
4.0
2200
70.9
4.94
54.0
99.8
4.21
9.4
2200
78.5
53.4
0.68
3.90
91.8
20.1
4.4
1850
69.8
4.84
53.3
104.9
4.23
10.6
1850
77.8
50.1
0.64
3.61
90.1
21.5
3.7
2200
72.1
4.99
55.1
100.3
4.24
9.7
2200
79.3
53.9
0.68
3.84
92.4
20.6
4.2
1850
73.0
5.00
56.0
106.5
4.28
11.1
1850
74.8
48.7
0.65
3.99
88.4
18.8
5.3
2200
75.4
5.10
58.0
101.7
4.33
10.3
2200
76.4
52.6
0.69
4.24
90.9
18.0
5.6
1850
76.2
5.08
58.9
108.2
4.39
11.5
1850
75.6
49.2
0.65
3.90
88.9
19.4
4.9
2200
78.7
5.17
61.1
103.1
4.47
10.6
2200
77.1
53.2
0.69
4.15
91.3
18.6
5.3
77.9
5.15
60.4
109.0
4.44
11.8
1850
76.4
49.9
0.65
3.83
89.5
19.9
4.6
12.7
1850
2200
80.5
5.22
62.7
103.9
4.52
10.9
2200
77.9
53.7
0.69
4.08
91.9
19.1
5.1
12.0
2.8
6.5
1850
81.2
5.31
63.0
110.6
4.48
12.5
1850
74.8
49.6
0.66
4.43
89.9
16.9
6.6
2200
83.7
5.35
65.5
105.2
4.59
11.6
2200
76.4
53.4
0.70
4.71
92.4
16.2
7.0
1850
84.0
5.39
65.6
112.0
4.56
12.9
1850
75.5
50.2
0.66
4.34
90.3
17.4
6.2
2200
86.7
5.40
68.2
106.5
4.70
11.9
2200
77.1
53.9
0.70
4.61
92.8
16.7
6.7
1850
86.2
5.46
67.5
113.1
4.63
13.3
1850
76.4
50.7
0.66
4.26
90.9
17.9
5.7
2200
89.0
5.46
70.4
107.5
4.78
12.3
2200
77.9
54.5
0.70
4.54
93.4
17.1
6.4
1850
88.3
5.66
69.0
114.2
4.57
14.1
1850
71.5
48.3
0.68
4.76
87.8
15.0
8.4
2200
91.2
5.62
72.0
108.4
4.75
13.0
2200
73.0
52.2
0.72
5.07
90.3
14.4
8.9
1850
90.4
5.74
70.8
115.3
4.62
14.5
1850
72.2
48.8
0.68
4.66
88.1
15.5
7.8
2200
93.3
5.66
74.0
109.3
4.83
13.4
2200
73.7
52.7
0.71
4.96
90.7
14.9
8.4
1850
93.2
5.81
73.3
116.6
4.70
15.0
1850
73.0
49.5
0.68
4.58
88.7
15.9
7.2
2200
96.3
5.72
76.7
110.5
4.93
13.8
2200
74.5
53.3
0.71
4.88
91.2
15.3
8.0
1850
95.6
6.03
75.1
117.9
4.65
15.8
1850
66.9
45.9
0.69
4.98
83.9
13.4
10.5
2200
98.8
5.90
78.6
111.6
4.90
14.7
2200
68.3
49.9
0.73
5.30
86.4
12.9
11.1
1850
97.0
6.09
76.2
118.5
4.67
16.3
1850
67.5
46.4
0.69
4.87
84.2
13.9
9.8
2200
100.1
5.93
79.9
112.1
4.95
15.1
2200
68.9
50.3
0.73
5.19
86.6
13.3
10.6
1850
100.3
6.17
79.2
120.2
4.76
16.8
1850
68.3
47.3
0.69
4.80
84.6
14.2
9.1
2200
103.6
6.00
83.2
113.6
5.06
15.6
2200
69.7
50.9
0.73
5.11
87.1
13.6
10.1
1850
64.7
45.7
0.71
5.38
83.1
12.0
12.2
2200
66.1
49.4
0.75
5.72
85.6
11.5
13.2
1850
65.5
46.4
0.71
5.29
83.5
12.4
11.3
2200
66.8
49.8
0.75
5.63
86.0
11.9
12.5
1850
57.8
42.3
0.73
5.62
77.0
10.3
14.9
2200
59.0
45.5
0.77
5.98
79.4
9.9
16.1
1850
58.4
42.7
0.73
5.52
77.3
10.6
13.8
2200
59.6
45.9
0.77
5.88
79.7
10.2
15.3
18.0
15.0
15.0
4.0
5.3
2.7
3.8
5.1
9.1
12.2
6.3
8.8
11.8
12.0
2.6
6.0
15.0
3.7
8.5
4.9
11.4
12.0
2.5
5.8
15.0
3.6
8.2
18.0
4.8
2.4
5.6
15.0
3.4
7.9
4.6
2.3
5.4
15.0
3.3
7.6
4.4
Operation not recommended
Operation not recommended
10.6
12.0
18.0
Operation not recommended
11.0
12.0
18.0
120
9.5
45.4
2200
5.5
18.0
110
4.1
1850
18.0
18.0
100
13.5
3.0
12.0
90
5.8
12.0
18.0
80
13.9
12.0
18.0
50
6.0
Operation not recommended
Operation not recommended
10.2
1850
54.7
41.0
0.75
6.17
75.8
8.9
2200
55.8
44.3
0.79
6.57
78.2
8.5
19.5
1850
55.3
41.5
0.75
6.06
76.0
9.1
16.7
2200
56.5
44.6
0.79
6.44
78.4
8.8
18.5
WaterFurnace works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice. Please contact WaterFurnace at 1-800-478-5667 for latest design and
specifications. Purchaser’s approval of this data set signifies that the equipment is acceptable under the provisions of the job specification. Statements and other information contained herein are not express warranties and do not form the
basis of any bargain between the parties, but are merely WaterFurnace’s opinion or commendation of its products. The latest version of this document is available at www.waterfurnace.com.
SD1585
10/08
41
Page _____ of _____
Contractor:
Engineer:
Project Name:
ENVISION Residential Series
2-6 Tons 60Hz
P.O.:
Unit Tag:
Engineering Guide Specifications
General
Furnish and install WaterFurnace Water Source Heat
Pumps, as indicated on the plans. Equipment shall be
completely assembled, piped and internally wired. Capacities and characteristics as listed in the schedule and the
specifications that follow. The reverse cycle heating/cooling units shall be either suspended type with horizontal air
inlet and discharge or floor mounted type with horizontal
air inlet and vertical upflow/downflow air discharge. Units
shall be ARI/ISO 13256-1 certified and listed by a nationally recognized safety-testing laboratory or agency, such as
ETL Testing Laboratory. Each unit shall be computer runtested at the factory with conditioned water and operation
verified to catalog data. Each unit shall be mounted on a
pallet and shipped in a corrugated box or stretch-wrapped.
The units shall be designed to operate with entering liquid
temperature between 20°F and 120°F [-6.7°C and 48.9°C].
Casing & Cabinet
The cabinet shall be fabricated from heavy-gauge galvanized steel and finished with corrosion-resistant powder
coating. This corrosion protection system shall meet the
stringent 1000 hour salt spray test per ASTM B117. The
interior shall be insulated with 1/2-inch thick, multi-density,
Cleanable aluminum foil coated glass fiber with edges
sealed or tucked under flanges to prevent the introduction of glass fibers into the discharge air. Standard cabinet panel insulation must meet NFPA 90A requirements,
air erosion and mold growth limits of UL-181, stringent
fungal resistance test per ASTM-C1071 and ASTM G21,
and shall meet zero level bacteria growth per ASTM G22.
Unit insulation must meet these stringent requirements or
unit(s) will not be accepted.
One (horizontal) to two (vertical) blower and three
compressor compartment access panels shall be ‘lift-out’
removable with supply and return ductwork in place. The
front access panel shall be hinged to provide easy access to the electrical/compressor section. The control box
shall be hinged and removable to allow easy access to the
compressor. The internal component layout shall provide
for service access from the front side for restricted installations.
A duct collar shall be provided on the supply air opening. Standard size 2 in. [5.1 cm] MERV 11 pleated filters
shall be provided with each unit. Vertical units shall have
a return air filter rack/duct collar; the horizontal units shall
have a filter bracket each field convertible from 2 in. [5.1
cm] to 1 in. [2.5 cm]. The upflow vertical units shall have a
removable insulated divider panel between the air han-
dling section and the compressor section to minimize the
transmission of compressor noise and to permit operational service testing without air bypass. Vertical units shall be
supplied with left or right horizontal air inlet and top vertical
air discharge. Horizontal units shall be supplied with left or
right air inlet and side or end air discharge.
The compressor shall be double isolation mounted using selected durometer grommets to provide vibration free
compressor mounting. The compressor mounting bracket
shall be acoustically deadened galvanized steel to prevent
vibration transmission to the cabinet.
The drain pan shall be of plastic construction to inhibit
corrosion and bacterial growth. Drain outlet shall be located on pan as to allow complete and unobstructed drainage of condensate. The unit as standard will be supplied
with solid-state electronic condensate overflow protection.
Mechanical float switches WILL NOT be accepted. Vertical
units shall be furnished with a PVC slip condensate drain
connection and an internal factory installed condensate
trap.
Refrigerant Circuit
All units shall contain a sealed refrigerant circuit
including a hermetic motor-compressor, bidirectional
thermostatic expansion valve, finned tube air-to-refrigerant
heat exchanger, reversing valve, coaxial tube water-torefrigerant heat exchanger, optional desuperheater coil,
and service ports.
Compressors shall be high-efficiency single speed rotary or scroll, or dual capacity scroll type designed for heat
pump duty and mounted on vibration isolators. Compressor motors shall be single-phase PSC with overload protection. The FormiShield electro-coated coil shall be sized
for low-face velocity and constructed of lanced aluminum
fins bonded to rifled copper tubes in a staggered pattern
not less than three rows deep for enhanced performance.
The coaxial water-to-refrigerant heat exchanger shall
be designed for low water pressure drop and constructed
of a convoluted copper (cupronickel option) inner tube
and a steel outer tube. Refrigerant to air heat exchangers
shall utilize enhanced corrugated lanced aluminum fins
and rifled copper tube construction rated to withstand 600
PSIG (4135 kPa) refrigerant working pressure. Refrigerant
to water heat exchangers shall be of copper inner water
tube and steel refrigerant outer tube design, rated to withstand 600 PSIG (4135 kPa) working refrigerant pressure
and 450 PSIG (3101 kPa) working water pressure.The
thermostatic expansion valve shall provide proper superheat over the entire liquid temperature range with minimal
WaterFurnace works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice. Please contact WaterFurnace at 1-800-478-5667 for latest design and
specifications. Purchaser’s approval of this data set signifies that the equipment is acceptable under the provisions of the job specification. Statements and other information contained herein are not express warranties and do not form the
basis of any bargain between the parties, but are merely WaterFurnace’s opinion or commendation of its products. The latest version of this document is available at www.waterfurnace.com.
SD1585
10/08
42
Page _____ of _____
Contractor:
Engineer:
Project Name:
ENVISION Residential Series
2-6 Tons 60Hz
P.O.:
Unit Tag:
Engineering Guide Specifications (cont.)
“hunting.” The valve shall operate bidirectionally without the
use of check valves.
The water-to-refrigerant heat exchanger, optional desuperheater coil and refrigerant suction lines shall be insulated to prevent condensation at low liquid temperatures.
motor and control box shall be harness plug wired for easy
removal.
Piping
Supply and return water connections (and optional
desuperheater connections) shall be 1 in. [25.4 mm] FPT
brass swivel fittings, which provide a union and eliminate
the need for pipe wrenches and sealants when making field
connections. All water piping shall be insulated to prevent
condensation at low liquid temperatures, on the vertical
upflow units, the condensate connection shall be a ¾ in.
[19.1 mm] PVC socket with internally-trapped hose that can
be routed to front or side locations.
Fan Motor & Assembly
The fan shall be a direct drive centrifugal type with
a dynamically balanced wheel. The housing and wheel
shall be designed for quiet low outlet velocity operation.
The fan housing shall be removable from the unit without
disconnecting the supply air ductwork for servicing of the
fan motor. The fan motor shall be a three-speed PSC or
variable-speed ECM2 type. The ECM2 fan motor shall be
soft starting, shall maintain constant CFM over its operating
static range, and shall provide 12 CFM settings. An optional
3-speed PSC fan motor is available on all single speed
models. The fan motor shall be isolated from the housing by
rubber grommets. The motor shall be permanently lubricated and have thermostatic overload protection. ECM2
motors shall be long-life ball bearing type.
Hanger Kit (field-installed horizontal units only)
The hanger kit shall consist of galvanized steel brackets,
bolts, lock washers, and isolators and shall be designed to
fasten to the unit bottom panel for suspension from 3/8inch threaded rods. Units sizes 022-072 shall include six
brackets.
Electrical
A control box shall be located within the unit compressor compartment and shall contain a 75VA transformer, 24
Volt activated, 2 pole compressor contactor, terminal block
for thermostat wiring and solid-state controller for complete
unit operation. Electro-mechanical operation WILL NOT
be accepted. Units shall be name-plated for use with time
delay fuses or HACR circuit breakers. Unit controls shall be
24 Volt and provide heating or cooling as required by the
remote thermostat/sensor. A microprocessor-based controller that interfaces with a multi-stage electronic thermostat
to monitor and control unit operation shall be provided. The
control shall provide operational sequencing, fan speed
control, fan failure high and low pressure switch monitoring, freeze protection, hot water limit thermistor sensing,
condensate overflow sensing, auxiliary heat staging, lockout mode control, hot water and loop pump control, LED
status and fault indicators, fault memory, field selectable
options, and accessory output. The Lockout signal output
shall have a pulsed option so that DDC systems can read
specific lockout conditions from the control. An integrally
mounted ComfortAlert compressor sensing module shall
provide monitoring for open start, open run, locked rotor,
welded contactor and short cycle conditions.
A detachable terminal block with screw terminals will be
provided for field control wiring. All units shall have knockouts for entrance of low and line voltage wiring. The fan
Options & Accessories
Cupronickel Heat Exchanger
An optional cupronickel water-to-refrigerant heat exchanger shall be provided.
Desuperheater
An optional heat reclaiming desuperheater coil of vented
double-wall copper construction suitable for potable water
shall be provided. The coil and hot water circulating pump
shall be factory mounted inside the unit with integral electronic high limit temperature monitoring and external on/off
switch.
PSC Fan Motor
An optional 3-speed PSC fan motor is available on all
single speed models.
Thermostat (field-installed)
A multi-stage auto-changeover electronic digital thermostat shall be provided. The thermostat shall offer three
heating and two cooling stages with precise temperature
control. An OFF-HEAT-AUTO-COOL-EMERG system
switch, OFF-AUTO fan switch, and indicating LEDs shall be
provided. The thermostat shall display in °F or °C.
WaterFurnace works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice. Please contact WaterFurnace at 1-800-478-5667 for latest design and
specifications. Purchaser’s approval of this data set signifies that the equipment is acceptable under the provisions of the job specification. Statements and other information contained herein are not express warranties and do not form the
basis of any bargain between the parties, but are merely WaterFurnace’s opinion or commendation of its products. The latest version of this document is available at www.waterfurnace.com.
SD1585
10/08
43
Page _____ of _____
Contractor:
Engineer:
Project Name:
ENVISION Residential Series
2-6 Tons 60Hz
P.O.:
Unit Tag:
Engineering Guide Specifications (cont.)
Electronic Air Cleaner (field-installed)
A 1 in. [25 mm] electronic air cleaner, cleanable 97%
efficiency at 0.3 microns and larger, shall be provided in lieu
of the standard throwaway filter. The initial pressure drop
across the filter shall not exceed 0.2 in. w.g. at 300 fpm
force velocity.
Electrostatic Air Cleaner (field-installed)
A 1 in. [25 mm] electrostatic air cleaner, cleanable 90%
efficiency, shall be provided in lieu of the standard throwaway filter. The initial pressure drop across the filter shall
not exceed 0.15 in. w.g. at 300 fpm force velocity.
AlpinePure 411–Rack
4” Pleated Filter Accessory
A 4 in. thick [102 mm] MERV 11 filter and filter rack shall
be provided in lieu of the standard filter and rack.
Earth Loop Flow Center (field-installed)
A self-contained module shall provide all liquid flow,
fill and connection requirements for ground source closed
loop systems up to 20 GPM. The pumps shall be wired to
a power block located in the nearest unit. The heat pump
units shall contain low voltage pump slaving control so that
two units may share one flow center.
Auxiliary Heater (field-installed)
An electric resistance heater shall provide supplemental
and/or emergency heating capability. Vertical units shall
have the control box and resistance heater coil assembly
mounted internally. For horizontal units, the control box
shall be mounted internally while the resistance heater
coil assembly shall be mounted externally. A low voltage
plug shall be provided in each unit for quick auxiliary heat
connection. The heater shall operate in sequenced stages
as controlled by the unit’s microprocessor. The heater shall
feed line voltage power to the unit fan and transformer to
provide emergency heat capability in the event of an open
compressor circuit breaker.
WaterFurnace works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice. Please contact WaterFurnace at 1-800-478-5667 for latest design and
specifications. Purchaser’s approval of this data set signifies that the equipment is acceptable under the provisions of the job specification. Statements and other information contained herein are not express warranties and do not form the
basis of any bargain between the parties, but are merely WaterFurnace’s opinion or commendation of its products. The latest version of this document is available at www.waterfurnace.com.
SD1585
10/08
44
Page _____ of _____
Download PDF
Similar pages